Pasar al contenido principal

FUNCTIONAL POROUS CEMENTITIOUS NANOCOMPOSITES FOR HEAT STORAGE IN BUILDINGS USING PHASE CHANGE MATERIALS

PCI2019-103657

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos Programación Conjunta Internacional
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Elucidation of conduction mechanism in graphene nanoplatelets (GNPs)/cement composite using dielectric spectroscopy

  • Goracci, Guido
  • Dolado, Jorge S.
This article belongs to the Special Issue Energy in Construction and Building Materials., Understanding the mechanisms that govern the conductive properties of multifunctional cement-materials is fundamental for the development of the new applications proposed to enhance the energy efficiency, safety and structural properties of smart buildings and infrastructures. Many fillers have been suggested to increase the electrical conduction in concretes; however, the processes involved are still not entirely known. In the present work, we investigated the effect of graphene nanoplatelets (1 wt% on the electrical properties of cement composites (OPC/GNPs). We found a decrease of the bulk resistivity in the composite associated to the enhancement of the charge transport properties in the sample. Moreover, the study of the dielectric properties suggests that the main contribution to conduction is given by water diffusion through the porous network resulting in ion conductivity. Finally, the results support that the increase of direct current in OPC/GNPs is due to pore refinement induced by graphene nanoplatelets., This work is partially supported by the Gobierno Vasco-UPV/EHU project IT1246-19 and the Spanish Ministry of Science, Innovation and Universities projects PCI2019-103657 and RTI2018-098554-B-I00. The project is co-funded by EUSKAMPUS FUNDAZIOA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

THz fingerprints of cement-based materials

  • Dolado, Jorge S.
  • Goracci, Guido
  • Duque, Eduardo
  • Martauz, Pavel
  • Zuo, Yibing
  • Ye, Guang
This article belongs to the Special Issue Modeling of Cementitious Materials and Structures., To find materials with an appropriate response to THz radiation is key for the incoming THz technology revolution. Unfortunately, this region of the electromagnetic spectra remains largely unexplored in most materials. The present work aims at unveiling the most significant THz fingerprints of cement-based materials. To this end transmission experiments have been carried out over Ordinary Portland Cement (OPC) and geopolymer (GEO) binder cement pastes in combination with atomistic simulations. These simulations have calculated for the first time, the dielectric response of C-S-H and N-A-S-H gels, the most important hydration products of OPC and GEO cement pastes respectively. Interestingly both the experiments and simulations reveal that both varieties of cement pastes exhibit three main characteristic peaks at frequencies around ~0.6 THz, ~1.05 THz and ~1.35 THz, whose origin is governed by the complex dynamic of their water content, and two extra signals at ~1.95 THz and ~2.75 THz which are likely related to modes involving floppy parts of the dried skeleton., This work is partially supported by the Gobierno Vasco-UPV/EHU project IT1246-19 and the Spanish Ministry of Science, Innovation and Universities projects PCI2019-103657 and RTI2018-098554-B-I00. Besides, the economic support from POVAZSKA and SKKC foundation is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Belite cements and their activation

  • Cuesta, Ana
  • Ayuela, Andrés
  • Aranda, Miguel A.
Belite cements, BCs, containing mainly belite, alite and calcium aluminates, are currently used as low heat cements. These binders produce high amounts of C–S–H gel and have very good durability properties which are reviewed. Additional advantages include: (i) lower limestone demand, with lower associated CO2 emissions; (ii) lower energy demand; (iii) lower kiln operating temperature, which means lowering CO2 and NOx emissions from fuel burning; and (iv) lower temperature increase at early hydration age. However, early-age strength developments are not competitive with those of Portland cements. Hence, to improve their early-age strength developments is a research priority known as activation. This enhancement can be attained by three compatible approaches: (i) chemical, (ii) physical; and (iii) admixture activations. The current research status for BCs activation is reviewed including: cost-effective element substitutions to stabilize high-temperature forms; fast cooling, milling and mild temperature hydration as physical activation; and the use of C–S–H seeds as admixture activation. After discussion of the resulting microstructures, a research outlook is exercised., The work in Malaga has been supported by BIA2017-82391-R research grant, which is co-funded by FEDER. The work in San Sebastián was supported by PID2019-105488GB-I00 research grant, the Gobierno Vasco UPV/EHU (Project No. IT-1246-19), and the EIG CONCERT-Japan 5th Joint Call on Functional Porous Materials (Project No. PCI2019-103657-POROPCM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Normal and anomalous self-healing mechanism of crystalline calcium silicate hydrates

  • Dupuis, Romain
  • Moon, Juhyuk
  • Jeong, Yeonung
  • Taylor, Rae
  • Kang, Sung-Hoon
  • Manzano, Hegoi
  • Ayuela, Andrés
  • Monteiro, Paulo
  • Dolado, Jorge S.
The origin of different stability of crystalline calcium silicate hydrates was investigated. The tobermorite crystal has been used as an analog of cement hydrate that is being mostly manufactured material on earth. Normal tobermorite is thermally unstable and transforms to amorphous at low pressure. Meanwhile, anomalous tobermorite with high Al content does not significantly transform under high pressure or high temperature. Conducted X-ray absorption spectroscopy explains the weak stability of normal tobermorite which was originally hypothesized by the role of zeolitic Ca ions in the cavities of silicate chains. Atomic simulations reproduced the experimentally observed trend of pressure behavior once the ideal structures were modified to account for the Al content as well as the chain defects. The simulations also suggested that the stability of tobermorite under stress could be rationalized as a self-healing mechanism in which the structural instabilities were accommodated by a global sliding of the CaO layer., J.M. acknowledges support by a grant (20SCIP-C159063-01) from Construction Technology Research Program funded by Ministry of Land, Infrastructure and Transport of Korean government. H.M. acknowledges the financial support from the Gobierno Vasco (project IT912-16). The work in San Sebastián (R.D., J.S.D, A.A) was supported by the Spanish Ministry of Science and Innovation with RTI2018-098554-B-I00, PID2019-105488GB-I00 and PCI2019-103657 research grants, the Gobierno Vasco UPV/EHU (Project No. IT-1246-19), and the European Commission from the NRG-STORAGE project (GA 870114). The Institute of Engineering Research in Seoul National University provided research facilities for this work. The Ca-XAS and HPXRD experiments were performed at XAFCA beamline in Singapore Synchrotron Light Source (SSLS) and 12.2.2 beamline in Advanced Light Source (ALS), respectively. The ALS supported by a DOE Office of Science User Facility under contract no. DE-AC02-05CH11231 and the Consortium for Materials Properties Research in Earth Sciences under NSF Cooperative Agreement EAR 1606856., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Correlation between the dynamics of nanoconfined water and the local chemical environment in calcium silicate hydrate nanominerals

  • Musumeci, Valentina
  • Goracci, Guido
  • Sanz Camacho, Paula
  • Dolado, Jorge S.
  • Aymonier, Cyril
Calcium silicate hydrates are members of a large family of minerals with layered structures containing pendant CaOH and SiOH groups that interact with confined water molecules. To rationalize the impact of the local chemical environment on the dynamics of water, SiOH- and CaOH-rich model nanocrystals were synthesized by using the continuous supercritical hydrothermal method and then systematically studied by a combination of spectroscopic techniques. In our comprehensive analysis, the ultrafast relaxation dynamics of hanging hydroxy groups can be univocally assigned to CaOH or SiOH environments, and the local chemical environment largely affects the H-bond network of the solvation water. Interestingly, the ordered “ice-like” solvation water found in the SiOH-rich environments is converted to a disordered “liquid-like” distribution in the CaOH-rich environment. This refined picture of the dynamics of confined water and hydroxy groups in calcium silicate hydrates can also be applied to other water-containing materials, with a significant impact in many fields of materials science., This research was carried out under the umbrella of the Bordeaux-Euskampus Euro-regional Campus of International Excellence initiative and supported by the International Doctoral Program developed between the University of Bordeaux (UB) and the University of the Basque Country (UPV/EHU). Valentina Musumeci is grateful to the Initiative of Excellence (IdEX) of the University of Bordeaux for financial support. The authors also acknowledge CNRS, Bordeaux INP and Région Nouvelle-Aquitaine for their financial support. This work is partially supported by the Gobierno Vasco-UPV/EHU project IT1246-19 and the Spanish Ministry of Science, Innovation and Universities projects PCI2019-103657 and RTI2018-098554-B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interactions between reduced graphene oxide with monomers of (calcium) silicate hydrates: a first-principles study

  • Izadifar, Mohammadreza
  • Dolado, Jorge S.
  • Thissen, Peter
  • Ayuela, Andrés
Graphene is a two-dimensional material, with exceptional mechanical, electrical, and thermal properties. Graphene-based materials are, therefore, excellent candidates for use in nanocomposites. We investigated reduced graphene oxide (rGO), which is produced easily by oxidizing and exfoliating graphite in calcium silicate hydrate (CSHs) composites, for use in cementitious materials. The density functional theory was used to study the binding of moieties, on the rGO surface (e.g., hydroxyl-OH/rGO and epoxide/rGO groups), to CSH units, such as silicate tetrahedra, calcium ions, and OH groups. The simulations indicate complex interactions between OH/rGO and silicate tetrahedra, involving condensation reactions and selective repairing of the rGO lattice to reform pristine graphene. The condensation reactions even occurred in the presence of calcium ions and hydroxyl groups. In contrast, rGO/CSH interactions remained close to the initial structural models of the epoxy rGO surface. The simulations indicate that specific CSHs, containing rGO with different interfacial topologies, can be manufactured using coatings of either epoxide or hydroxyl groups. The results fill a knowledge gap, by establishing a connection between the chemical compositions of CSH units and rGO, and confirm that a wet chemical method can be used to produce pristine graphene by removing hydroxyl defects from rGO., This research was funded by Karlsruhe House of Young Science (KHYS), and Deutsche Forschungsgemeinschaft (DFG). A.A. and J.S.D. also acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2019-105488GB-I00 and PCI2019-103657 grant), the Gobierno Vasco UPV/EHU (project no. IT-1246-19), and the European Commission NRG-STORAGE project (project no. GA 870114). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metallic carbon nanotube quantum dots with broken symmetries as a platform for tunable terahertz detection

  • Buchs, G.
  • Marganska, Magdalena
  • González, J. W.
  • Eimre, K.
  • Pignedoli, C. A.
  • Passerone, D.
  • Ayuela, Andrés
  • Gröning, O.
  • Bercioux, Dario
arXiv:2006.10837v2, Generating and detecting radiation in the technologically relevant range of the so-called terahertz gap (0.1–10 THz) is challenging because of a lack of efficient sources and detectors. Quantum dots in carbon nanotubes have shown great potential to build sensitive terahertz detectors, usually based on photon-assisted tunneling. A recently reported mechanism combining resonant quantum dot transitions and tunneling barrier asymmetries results in a narrow linewidth photocurrent response with a large signal-to-noise ratio under weak THz radiation. That device was sensitive to one frequency, corresponding to transitions between equidistant quantized states. In this work we show, using numerical simulations together with scanning tunneling spectroscopy studies of a defect-induced metallic zigzag single-walled carbon nanotube quantum dot, that breaking simultaneously various symmetries in metallic nanotube quantum dots of arbitrary chirality strongly relaxes the selection rules in the electric dipole approximation and removes energy degeneracies. This leads to a richer set of allowed optical transitions spanning frequencies from 1 THz to several tens of THz, for a ∼10 nm quantum dot. Based on these findings, we propose a terahertz detector device based on a metallic single-walled carbon nanotube quantum dot defined by artificial defects. Depending on its length and contacts transparency, the operating regimes range from a high-resolution gate-tunable terahertz sensor to a broadband terahertz detector. Our calculations indicate that the device is largely unaffected by temperatures up to 100 K, making carbon nanotube quantum dots with broken symmetries a promising platform to design tunable terahertz detectors that could operate at liquid nitrogen temperatures., This work has been partially supported by the Spanish Ministry of Science and Innovation with PID2019-105488GB-I00 and PCI2019-103657 (A.A.) and FIS2017-82804-P (D.B.). The work of D.B. is partially supported by by the Transnational Common Laboratory QuantumChemPhys. The Basque Government supported this work through Project No. IT-1246-19 (A.A.). J.W.G. acknowledges financial support from FONDECYT: Iniciación en Investigación 2019 Grant N. 11190934 (Chile). A.A. acknowledge financial support by the European Commission from the NRG-STORAGE project (GA 870114). K.E., C.P. and D.P. acknowledge the Swiss National Science Foundation under Grant No. 200020_182015 and No. 200021_172527, and the NCCR MARVEL funded by the Swiss National Science Foundation (51NF40-182892). The Swiss National Supercomputing Centre (CSCS) under project ID s746 and s904 is acknowledged for computational resources., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How aromatic are molecular nanorings? The case of a six-porphyrin nanoring

  • Casademont-Reig, Irene
  • Guerrero-Avilés, Raúl
  • Ramos-Cordoba, Eloy
  • Torrent-Sucarrat, Miquel
  • Matito, Eduard
Large conjugated rings with persistent currents are novel promising structures in molecular-scale electronics. A six-porphyrin nanoring structure that allegedly sustained an aromatic ring current involving 78π electrons was recently synthesized. We provide here compelling evidence that this molecule is not aromatic, contrary to what was inferred from the analysis of 1H-NMR data and computational calculations that suffer from large delocalization errors. The main reason behind the absence of an aromatic ring current in these nanorings is the low delocalization in the transition from the porphyrins to the bridging butadiyne linkers, which disrupts the overall conjugated circuit. These results highlight the importance of choosing a suitable computational method to study large conjugated molecules and the appropriate aromaticity descriptors to identify the part of the molecule responsible for the loss of aromaticity., This work has been supported by grants from the Spanish government MICINN (PGC2018-098212-B-C21, PID2019-104772GB-I00, EUR2019-103825, PID2019-105488GB-I00, and PCI2019-103657), Diputación Foral de Gipuzkoa (2019-CIEN-000092-01), and Gobierno Vasco (IT1346-19, IT1254-19, PRE_2016_1_0159, and PIBA19-0004). E.R.C. acknowledges funding from the Juan de la Cierva program IJCI-2017-34658., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modification of the optical properties of molecular chains upon coupling to adatoms

  • Müller, Marvin M.
  • Kosik, Miriam
  • Pelc, Marta
  • Bryant, Garnett W.
  • Ayuela, Andrés
  • Rockstuhl, Carsten
  • Słowik, Karolina
Adsorbed atoms (adatoms) coupled to the matrix of solid state host materials as impurities can significantly modify their properties. Especially in low-dimensional materials, such as one-dimensional organic polymer chains or quasi-one-dimensional graphene nanoribbons, intriguing manipulation of the optical properties, such as the absorption cross section, is possible. The most widely used approach to couple quantum emitters to optical antennas is based on the Purcell effect. This formalism, however, does not comprise charge transfer from the emitter to the antenna, but only spontaneous emission of the quantum emitter into the tailored photonic environment, that is evoked by the antenna. To capture such effects, we present a tight-binding formalism to couple an adatom to a finite Su-Schrieffer-Heeger chain, where the former is treated as a two-level system and the latter acts as an optical antenna. We systematically analyze how the coupling strength and the position of the adatom influence the optical properties of the molecular chains in the model. We take into account charge transfer from the adatom to the chain and vice versa via an intersystem hopping parameter, and also include Coulomb interaction within the chain as well as between the adatom and the chain. We show that coupling the adatom to one of the bulk atoms of the linear chain results in a substantial change in optical properties already for comparatively small coupling strengths. We also find that the position of the adatom crucially determines if and how the optical properties of the chains are altered. Therefore, we identify this adatom-chain hybrid system as a tunable platform for light-matter interaction at the nanoscale., M.M.M. acknowledges financial support through the Research Travel Grant by the Karlsruhe House of Young Scientists (KHYS). M.M.M. and C.R. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (Project No. 378579271) within Project RO 3640/8-1 and from the VolkswagenStiftung. M.K. and K.S. acknowledge the support from the National Science Centre, Poland (Project No. 2016/23/G/ST3/04045). A.A. acknowledges support from the Spanish Ministry of Science and Innovation with Grants No. PID2019-105488GB-I00 and No. PCI2019-103657, the Basque Government through the University of the Basque Country Project No. IT-1246-19, and the European Commission from the NRG-STORAGE Project (No. GA 870114) and H2020-FET OPEN Project MIRACLE (No. GA 964450)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A molecular dynamics study of N–A–S–H gel with various Si/Al ratios

  • Chen, Yun
  • Dolado, Jorge S.
  • Li, Zhenming
  • Yin, Suhong
  • Yu, Qijun
  • Kostiuchenko, Albina
  • Ye, Guang
In this paper, the atomic structures of sodium aluminosilicate hydrate (N–A–S–H) gels with different Si/Al ratios are studied by molecular dynamics simulation. An N–A–S–H gel model was obtained from the polymerization of Si(OH)4 and Al(OH)3 monomers with the use of a reactive force field (ReaxFF). The simulated atomic structural features, such as the bond length, bond angle, and simulated X-ray diffraction pattern of the gel structure are in good accordance with the experimental results in the literature. Si–O–Al is found to be preferred over Si–O–Si in the N–A–S–H gel structure according to the amount of T–O–T bond angles and distribution of Si4(mAl). Pentacoordinate Al is identified in all simulated N–A–S–H models. It provides strong support to current knowledge that pentacoordinate Al in geopolymer does not only come from raw material. Furthermore, the structural analysis results also show that N–A–S–H gel with lower Si/Al ratios has a more cross-linked and compacted structure., The first author would like to acknowledge China Scholarship Council (Grant no. 201906150022) for financial support in this work. Jorge S. Dolado acknowledges the funding from the Gobierno Vasco-UPV/EHU (Project IT1246-19) and the Spanis Ministry of Science, Innovation and Universities (Projects PCI2019-103657 and RTI2018-098554-B-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Out-of-plane magnetic anisotropy in bulk ilmenite CoTiO3

  • Arruabarrena, Mikel
  • Leonardo, Aritz
  • Rodriguez-Vega, Martin
  • Fiete, Gregory A.
  • Ayuela, Andrés
Structural, electronic, and magnetic properties of bulk ilmenite CoTiO3 are analyzed in the framework of density functional theory, using the generalized gradient approximation and Hubbard-corrected approaches. We find that the G-type antiferromagnetic structure, which consists of antiferromagnetically coupled ferromagnetic ab planes, is the ground state of the system, in agreement with experiments. Furthermore, cobalt titanates present two critical temperatures related to the breaking of the inter- and intralayer magnetic ordering. This would result in the individual planes remaining ferromagnetic even at temperatures above the Néel temperature. When spin-orbit coupling is included in our calculations, we find an out-of-plane magnetic anisotropy, which can be converted to an in-plane anisotropy with a small doping of electrons corresponding to about 2.5% Ti substitution for Co, consistent with experimental expectations. We thus present a disorder-dependent study of the magnetic anisotropy in bulk CoTiO3, which will determine its magnon properties, including topological aspects., We gratefully acknowledge primary funding from the National Science Foundation through the Center for Dynamics and Control of Materials: an NSF MRSEC under Cooperative Agreement No. DMR-1720595, with additional support from NSF Grant No. DMR-1949701 and NSF Grant No. DMR2114825. This work was performed in part at the Aspen Center for Physics, which is supported by National Science Foundation Grant No. PHY-1607611. M.R.-V. was supported by LANL LDRD Program and by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division, Condensed Matter Theory Program. This work has been supported by the Spanish Ministry of Science and Innovation with Grants No. PID2019105488GB-I00 and No. PCI2019-103657. We acknowledge financial support by the European Commission from the NRG-STORAGE project (No.GA870114). The Basque Government supported this work through Project No. IT-1246-19. M.A. was supported by the Spanish Ministry of Science and Innovation through the FPI Ph.D. Fellowship No. BES-2017079677., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrical conductive properties of 3D-printedconcrete composite with carbon nanofibers

  • Goracci, Guido
  • Salgado, David M.
  • Gaitero, Juan J.
  • Dolado, Jorge S.
This article belongs to the Special Issue Nanostructured Materials for Energy Applications., Electrical conductive properties in cement-based materials have received attention in recent years due to their key role in many innovative application (i.e., energy harvesting, deicing systems, electromagnetic shielding, and self-health monitoring). In this work, we explore the use 3D printing as an alternative method for the preparation of electrical conductive concretes. With this aim, the conductive performance of cement composites with carbon nanofibers (0, 1, 2.5, and 4 wt%) was explored by means of a combination of thermogravimetric analysis (TGA) and dielectric spectroscopy (DS) and compared with that of specimens prepared with the traditional mold method. The combination of TGA and DS gave us a unique insight into the electrical conductive properties, measuring the specimens’ performance while monitoring the amount in water confined in the porous network. Experimental evidence of an additional contribution to the electrical conductivity due to sample preparation is provided. In particular, in this work, a strong correlation between water molecules in interconnected pores and the σ(ω) values is shown, originating, mainly, from the use of the 3D printing technique., This work was born under the umbrella of the ECRETE project (RTI2018-098554-B-I00) funded by MCIN/AEI/10.13039/501100011033 (Program I+D+i RETOS INVESTIGACIÓN 2018), the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/501100011033 and co-founded by the European Union (Programación Conjunta Internacional 2019) and the project NRG-STORAGE (GA 870114) funded by the European Commission. Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Localization versus delocalization of d-states within the Ni 2 MnGa Heusler alloy

  • Janovec, Jozef
  • Zelený, Martin
  • Heczko, Oleg
  • Ayuela, Andrés
We present calculations based on density-functional theory with improved exchange-correlation approaches to investigate the electronic structure of Ni2 MnGa magnetic shape memory alloy prototype. We study the effects of hybrid functionals as well as a Hubbard-like correction parameter U on the structural, electronic and magnetic properties of the alloy. We show that the previously successful application of U on Mn should be extended by including U on Ni to describe the d localized electrons more accurately and in better agreement with experiments. The bonding interactions within this intermetallic alloy are analysed including the role of non-transition metal. We found that the strongest and most stabilizing bond is formed between the Ga–Ni pairs due to the delocalized s–s and p–s orbital hybridization. Our findings suggest that minimization of the over-delocalization error introduced by standard semi-local exchange-correlation functionals leads to a better description of the Ni2 MnGa alloy. Furthermore we propose that the experimental total magnetic moment of Ni–Mn–Ga alloys could be increased after carefully selected heat treatment procedures., This work was supported by the Czech Science Foundation, Grant No. 21-06613S, and by the Operational Program Research, Development and Education financed by the European Structural and Investment Funds and the Czech Ministry of Education, Youth and Sports (MEYS CR) (project MATFUN CZ.02.1.01/0.0/0.0/15_003/0000487). J.J. and A.A. acknowledges the Spanish Ministry of Science and Innovation with PID2019-105488GB-I00, TED2021-132074B-C32, and PCI2019-103657, the Basque Government through the University of the Basque Country Project No. IT-1569-22, the European Commission from the NRG-STORAGE Project (No. GA 870114), H2020-FET OPEN Project MIRACLE (No. GA 964450), EUSKAMPUS foundation and the “Green Concrete” Transborder Lab., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revising quantum optical phenomena in adatoms coupled to graphene nanoantennas

  • Kosik, Miriam
  • Müller, Marvin M.
  • Słowik, Karolina
  • Bryant, Garnett W.
  • Ayuela, Andrés
  • Rockstuhl, Carsten
  • Pelc, Marta
Graphene flakes acting as photonic nanoantennas may sustain strong electromagnetic field localization and enhancement. To exploit the field enhancement, quantum emitters such as atoms or molecules should be positioned in such close proximity to the flake that electron tunneling might influence the optical and electronic properties of the system. However, tunneling is usually not considered if the optical coupling mechanism between quantum emitters and nanoantennas is at focus. This work presents a framework for describing the electron dynamics in hybrid systems consisting of graphene nanoflakes coupled both electronically and optically to adatoms and subject to external illumination. Our framework combines the single-particle tight-binding approach with a nonlinear master equation formalism that captures both optical and electronic interactions. We apply the framework to demonstrate the impact of electron tunneling between the adatom and the flake on emblematic quantum optical phenomena: degradation of coherent Rabi oscillations and quenching of Purcell spontaneous emission enhancement in two-level adatoms in proximity of triangular graphene nanoflakes., M.K. acknowledges support from the National Science Centre, Poland (Project No. 2016/23/G/ST3/04045). M.P. and K.S. acknowledge support from the National Science Centre, Poland (Project No. 2020/39/I/ST3/00526). M.M.M. acknowledges financial support through the Research Travel Grant by the Karlsruhe House of Young Scientists (KHYS). M.M.M. and C.R. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (Project No. 378579271) within Project RO 3640/8-1 and from the VolkswagenStiftung. A.A. acknowledges the Spanish Ministry of Science and Innovation with PID2019-105488GB-I00 and PCI2019-103657, the Basque Government through the University of the Basque Country Project No. IT-1246-19, the European Commission from the NRG-STORAGE Project (No. GA 870114) and H2020-FET OPEN Project MIRACLE (No. GA 964450). A.A. carried this study under the Translacional CommonLaboratory (LTC-Green Concrete)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomistic simulations, meso-scale analyses and experimental validation of thermal properties in ordinary Portland cement and geopolymer pastes

  • Caggiano, Antonio
  • Peralta, Ignacio
  • Fachinotti, Víctor D.
  • Goracci, Guido
  • Dolado, Jorge S.
Ordinary Portland Cement (OPC)- and alternative binder-based materials have been widely used in Thermal Energy Storage (TES) applications due to their excellent TES capacities, good mechanical properties and low-cost. In this attempt, this work proposes an upscaling procedure to model the TES properties of two hydrated pastes made of OPC and a Hybrid cement (i.e., an alternative H-Cement binder), the latter employed for a GEOpolymer-based composite (GEO). Firstly, an atomistic approach based on energy minimization and molecular dynamics is employed for modelling the thermal behaviors and heat storage capacities of CSH (calcium silicate hydrate) and NASH (sodium aluminosilicate hydrate) phases, being those the main phases for OPC-based paste and GEO, respectively. Then, an up-scaling optimization procedure and meso-scale FEM homogenization techniques are proposed to link the TES parameters of the atomistic main phases of OPC-based paste and GEO with the homogenized upper meso/macro scale values. To this end, the results of an experimental program on both OPC and GEO pastes have been considered as benchmark to calibrate/validate the numerical tools. Promising simulations at several scales and up-scaling procedures are demonstrated in terms of homogenized temperature-dependent heat capacity and thermal diffusivity, showing a good agreement with the experimental data of the analyzed mixtures., This work has been carried out under the umbrella of the Transborder laboratory LTC Green Concrete (https://greenconcretelab.com). We acknowledge the computing resources of the Donostia International Physics Center (DIPC). We also acknowledge the financial supports of: i) the grant RTI2018-098554-B-I00 of ECRETE project, funded by MCIN/AEI/10.13039/501100011033 and by ”ERDF A way of making Europe”; ii) the grant PCI2019-103657 of POROCM project, funded by MCIN/AEI/10.13039/501100011033 and co-funded by the European Commission; iii) the European Union’s Horizon 2020 research and innovation program under the grant agreement No: 870114; iv) the National Scientific and Technical Research Council (CONICET) of Argentina through the project “Computational design of functional thermal metamaterials in transient regime taking advantage of phase changes” (PIP 11220200101018CO), v) the National Agency for the Promotion of Research, Technological Development and Innovation (AGENCIA) of Argentina through the project “Computational design of metamaterials applied to the development of thermal diodes for building envelopes” (PICT 2020 SERIE A 03765), vi) the National Technological University (UTN) of Argentina, through the grant PID MAUTNFE0007745, and vii) the Technical University of Darmstadt for the “Future Talent (Guest Stay)” and “Career Bridging” Grants, both given to the second author of this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Theoretical elastic constants of tobermorite enhanced with reduced graphene oxide through hydroxyl vs epoxy functionalization: A first-principles study

  • Izadifar, Mohammadreza
  • Dolado, Jorge S.
  • Thissen, Peter
  • Ukrainczyk, Neven
  • Koenders, Eddie A.B.
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Graphene-based materials are considered excellent candidates to implement cementitious nanocomposites due to their mechanical properties. This paper presents a comprehensive interface interaction that ends up with computing the elastic properties for four models of the C–S–H gel, taking tobermorite 14 Å as an example, with reduced graphene oxide (rGO) to form reinforced (tobermorite) cementitious nanocomposites within the density functional theory. We found that upon relaxing the model structures, the dissociation of hydroxyl functional groups from the hydroxyl/rGO lattice occurs not only in the presence of Ca2+ ions to compensate for local charges but even when the Ca2+ charges are compensated with hydroxyl groups. In contrast, rGO/CSH interactions remained close to the initial structural models of the epoxy rGO surface. The elastic constants showed high improvements for the cementitious nanocomposite of tobermorite 14 Å with intercalated hydroxyl/rGO layers. Thus, the bulk modulus, shear modulus, Young’s modulus, and Poisson’s ratio increased up to limits set as 165, 128, 134, and 15% compared to tobermorite 14 Å, respectively. In more detail, the specific values of the elastic constants were influenced by the interface, specifically the presence of hydroxyl or epoxy groups as well as how the charges of the Ca2+ ions were compensated. These findings are of interest for the design of future experiments that will help to engineer better rGO/cement composites., This research was fully funded by Karlsruhe House of Young Science (KHYS) and Deutsche Forschungsgemeinschaft (DFG) with the project number of 446266595. A.A. and J.S.D. also acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2019-105488GB-I00, PCI2019-103657 grant, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the European Commission NRG-STORAGE project (GA 870114), MIRACLE project (GA 964450), and NaturSea-PV (GA 101084348). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal conductivity of layered minerals using molecular dynamics simulation: A case study on calcium sulfates

  • Sarkar, Prodip Kumar
  • Mitra, Nilanjan
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Layered minerals containing inter-layer water show directional anisotropy. In previous work, the authors have shown that this inter-layer water affects the mechanical performance of these minerals. Even though difference in thermal conductivity of minerals has been alluded to in experimental literature due to presence of water molecules within crystal, a detailed coordinated theoretical study has not been carried out. In this work, a molecular dynamics study has been presented on sulfates of calcium to demonstrate that thermal conductivity is indeed reduced with the presence of inter-layer water. The correlation between the vibration of different molecular groups to the thermal transport mechanism of the material has been investigated. It has been observed that vibration modes of H2O molecules have a negligible contribution to thermal transport eventually reducing thermal conductivity perpendicular to the water layer. Even though calcium sulfate has been chosen for this study, it can be anticipated that similar behaviors can be observed with other minerals in which inter-layer water is present. This study represents a detailed structure–property correlation in the thermal transport mechanism through layered minerals., This research was also carried out under the umbrella of the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/ 501100011033 and co-founded by the European Union (Programaci’ on Conjunta Internacional 2019) and the projects MIRACLE (GA 964450) and NRG-STORAGE (GA 870114) funded by the European Commission. We also acknowledge the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete. This work was born under the umbrella of the project “Photonic Metaconcrete with Infrared RAdiative Cooling Capacity for Large Energy Savings (MIRACLE: GA 964450)” funded by the European Union (Programacion Conjunta Internacional 2019) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic order and magnetic anisotropy in two-dimensional ilmenenes

  • Aguilera-del-Toro, Rodrigo Humberto
  • Arruabarrena, Agustín
  • Leonardo, Aritz
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Iron ilmenene is a new two-dimensional material that has recently been exfoliated from the naturally occurring iron titanate found in ilmenite ore, a material that is abundant on the earth's surface. In this work, we theoretically investigate the structural, electronic and magnetic properties of 2D transition-metal-based ilmenene-like titanates. The study of magnetic order reveals that these ilmenenes usually present intrinsic antiferromagnetic coupling between the 3d magnetic metals decorating both sides of the Ti–O layer. Furthermore, the ilmenenes based on late 3d brass metals, such as CuTiO3 and ZnTiO3, become ferromagnetic and spin compensated, respectively. Our calculations which include spin–orbit coupling reveal that the magnetic ilmenenes have large magnetocrystalline anisotropy energies when the 3d shell departs from being either filled or half-filled, with their spin orientation being out-of-plane for elements below half-filling of 3d states and in-plane above. These interesting magnetic properties of ilmenenes make them useful for future spintronic applications because they could be synthesized as already realized in the iron case., This work has been supported by the Spanish Ministry of Science and Innovation through grants PID2019-105488GB-I00, TED2021-132074B-C32 and PCI2019-103657. We acknowledge financial support by the European Commission from the MIRACLE (ID 964450), NaturSea-PV (ID 101084348), and NRG-STORAGE project (GA 870114). The Basque Government supported this work through Project No. IT-1569-22. M. A. was supported by the Spanish Ministry of Science and Innovation through the FPI PhD Fellowship BES-2017-079677. R. H. A.-T. acknowledges the postdoctoral contract from the Donostia International Physics Center., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wigner-Seitz truncated time-dependent density functional theory approach for the calculation of exciton binding energies in solids

  • Arruabarrena, Agustín
  • Leonardo, Aritz
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Time-dependent density functional theory (TDDFT) has established itself as a computationally efficient and effective alternative to the many-body perturbation theory for calculating the optical properties of solids. Within the framework of linear response formalism, TDDFT exhibits good agreement between optical absorption spectra and experimental data, as well as the possibility of directly determining exciton binding energies. However, the family of exchange-correlation kernels, known as long-range-corrected kernels, which accurately capture excitonic features, face challenges in simultaneously generating visually appealing spectra and precise exciton binding energies. Recently, progress has been made in addressing this discrepancy through a hybrid-TDDFT approach. Our study reveals that the key lies in the numerical treatment of the long-range Coulomb singular term. We conduct a meticulous investigation of the impact of the term in both pure-TDDFT and hybrid approaches using a Wigner-Seitz truncated kernel. Notably, we show that computing this term presents formidable technical difficulties in both approaches, pointing to the need for an improved description of the electron-hole interaction., We acknowledge funding from the Spanish Ministry of Science and Innovation (Grants No. PID2019-105488GB-I00, No. PCI2019-103657, No. PID2022-139230NB-I00, and No. TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (Project No. IT-1569-22), the European Commission NRGSTORAGE Project (GA 870114), MIRACLE Project (GA 964450), and NaturSea-PV (GA 101084348). This research was conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials. Computations for this research were conducted on DIPC supercomputer computational resources. M.A. was supported by the Spanish Ministry of Science and Innovation through the FPI PhD Fellowship BES-2017-079677., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of paraffinic and biobased microencapsulated PCMs with reduced graphene oxide as thermal energy storage elements in cement-based materials for building applications

  • Erkizia, Edurne
  • Strunz, Christina
  • Dauvergne, Jean-Luc
  • Goracci, Guido
  • Peralta, Ignacio
  • Serrano, Ángel
  • Ortega, Amaya
  • Alonso, Beatriz
  • Zanoni, Francesca
  • Düngfelder, Michael
  • Dolado, Jorge S.
  • Gaitero, Juan J.
  • Mankel, Christoph
  • Koenders, Eddie A.B.
Addition of different types of phase change materials (PCMs) to cement-based materials for thermal energy storage has been broadly investigated in the literature. Many studies have researched the addition of organic PCMs and the thermal performance of the PCM-cement system. However, drawbacks such as leakage and poor thermal conductivity of the PCMs have stimulated studies to improve thermal properties within the PCM-cement system. Among the different solutions, addition of carbonous materials (such as graphite and carbon nanotubes) to improve thermal conductivity of the PCMs have been investigated. In the current work, an innovative system that contains microencapsulated PCMs (MPCMs) and purposely synthesized reduced graphene oxide (rGO) has been designed and assessed. The addition of rGO has two aims. The first one is to speed up the heat storage/release velocity by improving the thermal conductivity of the whole system. The second one is to improve the electrical conductivity of the system in order to actively (by applying voltage) be able to turn on the thermal storage/release feature. Up to the authors' knowledge, this is a novel approach for the development of active PCM-cement based thermal energy storage systems. Furthermore, in the present study, the use of paraffinic PCMs was compared with that of biobased PCMs in order to provide a more sustainable solution to the design of cement-based elements for buildings applications. A comprehensive thermal characterization (heat storage capacity, thermal conductivity and diffusivity) has been carried out as well as microstructural characterization. Moreover, broadband dielectric spectroscopy was used to characterize the electrical conductivity of the novel MPCM-rGO-cement system., ll the authors gratefully acknowledge the financial support from the NRG-STORAGE project (870114, 2020-2024, https//nrg-storage.eu/), financed by the European Union H2020 Framework under the LC-EEB-01-2019 call, IA type. J. S. Dolado acknowledges the funds from the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/50110001133 and co-funded by the European Union (Programación Conjunta Internacional 2019). J. S. Dolado, G. Goracci, J. J. Gaitero and E. Erkizia would like to acknowledge the Laboratory for Transborder Cooperation “Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials” (LTC-Green Concrete)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable geopolymer concrete for thermoelectric energy harvesting

  • Barzegar, Mohamad
  • Goracci, Guido
  • Martauz, Pavel
  • Dolado, Jorge S.
Concrete is a widely used material that presents vast opportunities for energy harvesting applications. Among these, thermoelectric concrete shows promising potential for harvesting waste heat generated in urban and industrial environments. However, the development of thermoelectric concrete poses several challenges that need to be addressed, such as the need to accurately account for the intrinsic voltage. This factor is frequently disregarded, but it has a significant impact on the measurement of thermoelectric properties in improving the intrinsically low electrical conductivity and Seebeck coefficient. In this context, this study evaluates the performance of industrially scalable geopolymer-based concrete that incorporates recycled aggregates as low-cost and environmentally friendly additives for thermoelectric energy harvesting applications. The concrete exhibited an intrinsic voltage of 15 mV, and a new test protocol was proposed to exclude its impact on thermoelectric measurements. The geopolymer concrete demonstrated a significantly high Seebeck coefficient of 570 µV/k, surpassing all previously reported values for geopolymer-based materials. Furthermore, it was discovered that the thermoelectric behavior of geopolymer-based concrete is of ionic origin, indicating that further improvements can be made by adjusting the pore solution chemistry. This finding suggests that there is ample opportunity for innovation and optimization in the development of thermoelectric concrete., This work was born under the umbrella of the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/ 501100011033 and co-founded by the European Union (Programación Conjunta Internacional 2019), the project NRG-STORAGE (GA 870114) funded by the European Commission., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low density phases of TiO2 by cluster self-assembly

  • Aguilera-Granja, Faustino
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
The interest in titanium dioxide (TiO2) phases is growing due to the number of applications in cosmetics, food industry and photocatalysis, an increase that is driven by its exceptional properties when engineered at the nanoscale like in the form of nanoparticles. Our goal is to discover unknown low-density phases of TiO2, with potential for applications in various fields. We then use well-known TiO2 clusters as fundamental building blocks to be self-assembled into unique structures to study their distinct characteristics. Density functional calculations are employed to relax the structures and identify the most stable TiO2 structures within an energy range of 0.1 eV per atom from the rutile and anatase phases, which are confirmed, validating our methodology. Going beyond conventional phases, we found two-dimensional TiO2 structures, previously explored in separate studies, and showing typical structures of transition metal dichalcogenide layers, that forge a bridge between different TiO2 structures. It is noteworthy that our investigation uncovered an entirely novel class of TiO2 structures featuring hexagonal cages like beehive channels, opening novel phases with huge potential. These discovered low-density phases are interesting, particularly the hexagonal cage structures with remarkable large gaps, because they introduce other dimensions for uncharted applications in the ever-growing TiO2 landscape., We acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2019-105488GB-I00, PCI2019-103657 grant, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the Diputación Foral de Gipuzkoa (Project No. 2023-CIEN-000077-01), the European Commission NRG-STORAGE project (GA 870114), MIRACLE project (GA 964450), and NaturSea-PV (GA 101084348). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials. Computations for this research were conducted on DIPC supercomputer computational resources, and in the IPICYT’S National Supercomputing Center supported this research with the computational time grant TKII-E-0424-I-090424-20/PR-22. Finally, we also acknowledge to José Limón from IF-UASLP for computational support in the calculations., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal properties of tricalcium aluminate: Molecular dynamics simulation and experimental approach

  • Sarkar, Prodip Kumar
  • Goracci, Guido
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., The energy sector is making a noticeable effort to migrate towards renewable energy to tackle the global warming effect. At large scale, a concentrated solar plant (CSP) is one of the viable options with limitations of steady heat generation due to the uncertainty of sunlight. Thermal batteries can mitigate the trouble to a large extent. Recently, concrete (artificial rock glued by cement) has become a point of interest for the research community as a cheap, nontoxic option. In this paper, thermo-mechanical properties of tricalcium aluminate (C3 A) have been studied for the first time in the framework of molecular dynamics along with modulated differential scanning calorimetry (MDSC) based experiments. The outcome suggests high-temperature stability of the material with reasonably higher heat capacity and thermal conductivity useful for potential application for thermal battery. Heat transport mechanism at the atomistic level has thoroughly been discussed., This work was born under the umbrella of the project “Photonic Metaconcrete with Infrared RAdiative Cooling Capacity for Large Energy Savings (MIRACLE)” funded by the EU (GA 964450). This research was also carried out under the umbrella of the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/ 501100011033 and co-founded by the European Union (Programaci’on Conjunta Internacional 2019) and the projects MIRACLE (GA 964450) and NRG-STORAGE (GA 870114) funded by the European Commission, . We also acknowledge the Transnational Common Laboratory (LTC) Aquitaine–Euskadi Network in Green Concrete., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reactive molecular dynamics based multiaxial failure analysis of jennite

  • Sarkar, Prodip Kumar
  • Goracci, Guido
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Jennite is one of the key analogs to calcium silicate gel (C-S-H), the main contributor to cement paste’s cohesive strength, which helps in gluing natural aggregates into concrete. The primary role of the glue is to sustain externally applied mechanical loading, preventing the disintegration of concrete. Atomic bonds within the glue are the ultimate receptors of these loads. In this study, the multiaxial failure mechanism of the C-S-H at the nanoscale has been investigated within the framework of molecular dynamics simulation. we have adopted jennite as a simpler representative of C-S-H gel to study the response under uni/multi-axial deformation and the underlying mechanism of failures. The major two mechanisms are the separation of calcium silicate layers and the breakage of covalent silicate chains. The study also presents an ellipsoidal yield surface of failure captured at the molecular scale., This research was also carried out under the umbrella of the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/ 501100011033 and co-founded by the European Union (Programación Conjunta Internacional 2019) and the projects MIRACLE (GA 964450) and NRG-STORAGE (GA 870114) funded by the European Commission . We also acknowledge the Transnational Common Laboratory (LTC) Aquitaine–Euskadi Network in Green Concrete., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kaolin clay-based geopolymer for ionic thermoelectric energy harvesting

  • Goracci, Guido
  • Ogundiran, Mary B.
  • Barzegar, Mohamad
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Dolado, Jorge S.
Geopolymers, a class of sustainable inorganic materials derived from natural and recycled resources, hold promise for various applications, including thermoelectric power generation. This study delves into the thermoelectric properties of Ikere white (IKW)-geopolymer, derived from kaolin clay, by employing rigorous measurements of thermal conductivity, electrical conductivity, and Seebeck coefficient. The investigation elucidates the pivotal role of temperature and ions in shaping the thermoelectric performance of IKW-geopolymer. Electrical conductivity analysis pinpoints ions within the geopolymer’s channels as primary contributors. Beyond a critical temperature, the evaporation of bulk water triggers a transition of charge carriers from one- to three-dimensional motion, resulting in reduced conductivity. The Seebeck coefficient exhibits a range from −182 to 42 μV/K, with its time-dependent profile suggesting that ions potentially drive thermoelectricity in cementitious materials. Notably, a unique transition from n-type to p-type behavior was observed in the geopolymer, opening new avenues for ionic thermoelectric capacitors. These insights advance our understanding of thermoelectric behavior in geopolymers and have the potential to propel the development of novel building materials for energy conversion applications., The authors also acknowledge the support provided by the PoroPCM project (PCI2019-103657), funded by MCIN/AEI/10.13039/501100011033 and cofunded by the European Union through the 2019 International Joint Programming Initiative. Additionally, the authors express gratitude for the funding received from the European Commission for the NRG-STORAGE project (GA 870114). M.B.O. acknowledges the financial support from the Women for Africa Foundation (Fundación Mujeres por África), Marid, Spain, for the research visit and thanks the Director, Centro de Física de Materiales, CSIC-UPV/EHU, San Sebastián, Spain for making available the research facilities for the study. Finally, A.I. and A.A. acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe,” Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR,” as well as financial support of Eusko Jaurlaritza, code: IT1566-22., Peer reviewed