Pasar al contenido principal

SOLUCIONES PARA EL ALMACENAMIENTO DE ENERGIA BASADAS EN CEMENTO Y HORMIGON.

RTI2018-098554-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanisms and dynamics of mineral dissolution: A new kinetic Monte Carlo model

  • Martin, Pablo
  • Manzano, Hegoi
  • Dolado, Jorge S.
Mineral dissolution is a fundamental process in geochemistry and materials science. It is controlled by the complex interplay of atomic level mechanisms like adatoms and terraces removal, pit opening, and spontaneous vacancy creation that can be gradually activated at different energies. Though the development of a comprehensive atomistic model is key to go deeper into the understanding of this phenomenon, existing models have failed to reproduce the abrupt dependence of the dissolution rate with the Gibbs free energy ( [Math Processing Error]). Herein, a new atomistic kinetic Monte Carlo (KMC) model is presented, which, invoking the microscopic reversibility of chemical reactions, captures the experimentally observed sigmoid dependence of the dissolution rate and provides new insights on the concomitant dissolution mechanisms. As a salient result, the model predicts the possible existence of unreported close‐to‐equilibrium dissolution modes where spontaneous vacancies creation and pit opening can occur before adatom and terrace removal., This work has been done under the umbrella of the Basque Country Initiative for Cement and Concrete Research (BASKRETE), and supported by the ELKARTEK and EMAITEK programs of the Basque Country Government. JSD also acknowledges the funding from the Spanish Ministry of Economy, Industry and Competitiveness (project Ref-201860I057) and the Spanish Ministry of Science, Innovation and Universities (project Ref RTI2018-098554-B-I00). P. Martin acknowledges support from the PhD scholarship Tecnalia Research & Innovation’s grant. All the simulations have been carried out at the high performance computing service of Basque Country i2basque.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Elucidation of conduction mechanism in graphene nanoplatelets (GNPs)/cement composite using dielectric spectroscopy

  • Goracci, Guido
  • Dolado, Jorge S.
This article belongs to the Special Issue Energy in Construction and Building Materials., Understanding the mechanisms that govern the conductive properties of multifunctional cement-materials is fundamental for the development of the new applications proposed to enhance the energy efficiency, safety and structural properties of smart buildings and infrastructures. Many fillers have been suggested to increase the electrical conduction in concretes; however, the processes involved are still not entirely known. In the present work, we investigated the effect of graphene nanoplatelets (1 wt% on the electrical properties of cement composites (OPC/GNPs). We found a decrease of the bulk resistivity in the composite associated to the enhancement of the charge transport properties in the sample. Moreover, the study of the dielectric properties suggests that the main contribution to conduction is given by water diffusion through the porous network resulting in ion conductivity. Finally, the results support that the increase of direct current in OPC/GNPs is due to pore refinement induced by graphene nanoplatelets., This work is partially supported by the Gobierno Vasco-UPV/EHU project IT1246-19 and the Spanish Ministry of Science, Innovation and Universities projects PCI2019-103657 and RTI2018-098554-B-I00. The project is co-funded by EUSKAMPUS FUNDAZIOA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

THz fingerprints of cement-based materials

  • Dolado, Jorge S.
  • Goracci, Guido
  • Duque, Eduardo
  • Martauz, Pavel
  • Zuo, Yibing
  • Ye, Guang
This article belongs to the Special Issue Modeling of Cementitious Materials and Structures., To find materials with an appropriate response to THz radiation is key for the incoming THz technology revolution. Unfortunately, this region of the electromagnetic spectra remains largely unexplored in most materials. The present work aims at unveiling the most significant THz fingerprints of cement-based materials. To this end transmission experiments have been carried out over Ordinary Portland Cement (OPC) and geopolymer (GEO) binder cement pastes in combination with atomistic simulations. These simulations have calculated for the first time, the dielectric response of C-S-H and N-A-S-H gels, the most important hydration products of OPC and GEO cement pastes respectively. Interestingly both the experiments and simulations reveal that both varieties of cement pastes exhibit three main characteristic peaks at frequencies around ~0.6 THz, ~1.05 THz and ~1.35 THz, whose origin is governed by the complex dynamic of their water content, and two extra signals at ~1.95 THz and ~2.75 THz which are likely related to modes involving floppy parts of the dried skeleton., This work is partially supported by the Gobierno Vasco-UPV/EHU project IT1246-19 and the Spanish Ministry of Science, Innovation and Universities projects PCI2019-103657 and RTI2018-098554-B-I00. Besides, the economic support from POVAZSKA and SKKC foundation is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

KIMERA: A kinetic montecarlo code for mineral dissolution

  • Martin, Pablo
  • Gaitero, Juan J.
  • Dolado, Jorge S.
  • Manzano, Hegoi
This article belongs to the Section Crystallography and Physical Chemistry of Minerals & Nanominerals., KIMERA is a scientific tool for the study of mineral dissolution. It implements a reversible Kinetic Monte Carlo (KMC) method to study the time evolution of a dissolving system, obtaining the dissolution rate and information about the atomic scale dissolution mechanisms. KIMERA allows to define the dissolution process in multiple ways, using a wide diversity of event types to mimic the dissolution reactions, and define the mineral structure in great detail, including topographic defects, dislocations, and point defects. Therefore, KIMERA ensures to perform numerous studies with great versatility. In addition, it offers a good performance thanks to its parallelization and efficient algorithms within the KMC method. In this manuscript, we present the code features and show some examples of its capabilities. KIMERA is controllable via user commands, it is written in object-oriented C++, and it is distributed as open-source software., J.S.D. acknowledges the funding from the Spanish Ministry of Economy, Industry and Competitiveness (project Ref-201860I057) and the Spanish Ministry of Science, Innovation and Universities (project Ref RTI2018-098554-B-I00). P. Martin acknowledges support from the PhD scholarship Tecnalia Research & Innovation’s grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Normal and anomalous self-healing mechanism of crystalline calcium silicate hydrates

  • Dupuis, Romain
  • Moon, Juhyuk
  • Jeong, Yeonung
  • Taylor, Rae
  • Kang, Sung-Hoon
  • Manzano, Hegoi
  • Ayuela, Andrés
  • Monteiro, Paulo
  • Dolado, Jorge S.
The origin of different stability of crystalline calcium silicate hydrates was investigated. The tobermorite crystal has been used as an analog of cement hydrate that is being mostly manufactured material on earth. Normal tobermorite is thermally unstable and transforms to amorphous at low pressure. Meanwhile, anomalous tobermorite with high Al content does not significantly transform under high pressure or high temperature. Conducted X-ray absorption spectroscopy explains the weak stability of normal tobermorite which was originally hypothesized by the role of zeolitic Ca ions in the cavities of silicate chains. Atomic simulations reproduced the experimentally observed trend of pressure behavior once the ideal structures were modified to account for the Al content as well as the chain defects. The simulations also suggested that the stability of tobermorite under stress could be rationalized as a self-healing mechanism in which the structural instabilities were accommodated by a global sliding of the CaO layer., J.M. acknowledges support by a grant (20SCIP-C159063-01) from Construction Technology Research Program funded by Ministry of Land, Infrastructure and Transport of Korean government. H.M. acknowledges the financial support from the Gobierno Vasco (project IT912-16). The work in San Sebastián (R.D., J.S.D, A.A) was supported by the Spanish Ministry of Science and Innovation with RTI2018-098554-B-I00, PID2019-105488GB-I00 and PCI2019-103657 research grants, the Gobierno Vasco UPV/EHU (Project No. IT-1246-19), and the European Commission from the NRG-STORAGE project (GA 870114). The Institute of Engineering Research in Seoul National University provided research facilities for this work. The Ca-XAS and HPXRD experiments were performed at XAFCA beamline in Singapore Synchrotron Light Source (SSLS) and 12.2.2 beamline in Advanced Light Source (ALS), respectively. The ALS supported by a DOE Office of Science User Facility under contract no. DE-AC02-05CH11231 and the Consortium for Materials Properties Research in Earth Sciences under NSF Cooperative Agreement EAR 1606856., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Correlation between the dynamics of nanoconfined water and the local chemical environment in calcium silicate hydrate nanominerals

  • Musumeci, Valentina
  • Goracci, Guido
  • Sanz Camacho, Paula
  • Dolado, Jorge S.
  • Aymonier, Cyril
Calcium silicate hydrates are members of a large family of minerals with layered structures containing pendant CaOH and SiOH groups that interact with confined water molecules. To rationalize the impact of the local chemical environment on the dynamics of water, SiOH- and CaOH-rich model nanocrystals were synthesized by using the continuous supercritical hydrothermal method and then systematically studied by a combination of spectroscopic techniques. In our comprehensive analysis, the ultrafast relaxation dynamics of hanging hydroxy groups can be univocally assigned to CaOH or SiOH environments, and the local chemical environment largely affects the H-bond network of the solvation water. Interestingly, the ordered “ice-like” solvation water found in the SiOH-rich environments is converted to a disordered “liquid-like” distribution in the CaOH-rich environment. This refined picture of the dynamics of confined water and hydroxy groups in calcium silicate hydrates can also be applied to other water-containing materials, with a significant impact in many fields of materials science., This research was carried out under the umbrella of the Bordeaux-Euskampus Euro-regional Campus of International Excellence initiative and supported by the International Doctoral Program developed between the University of Bordeaux (UB) and the University of the Basque Country (UPV/EHU). Valentina Musumeci is grateful to the Initiative of Excellence (IdEX) of the University of Bordeaux for financial support. The authors also acknowledge CNRS, Bordeaux INP and Région Nouvelle-Aquitaine for their financial support. This work is partially supported by the Gobierno Vasco-UPV/EHU project IT1246-19 and the Spanish Ministry of Science, Innovation and Universities projects PCI2019-103657 and RTI2018-098554-B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A molecular dynamics study of N–A–S–H gel with various Si/Al ratios

  • Chen, Yun
  • Dolado, Jorge S.
  • Li, Zhenming
  • Yin, Suhong
  • Yu, Qijun
  • Kostiuchenko, Albina
  • Ye, Guang
In this paper, the atomic structures of sodium aluminosilicate hydrate (N–A–S–H) gels with different Si/Al ratios are studied by molecular dynamics simulation. An N–A–S–H gel model was obtained from the polymerization of Si(OH)4 and Al(OH)3 monomers with the use of a reactive force field (ReaxFF). The simulated atomic structural features, such as the bond length, bond angle, and simulated X-ray diffraction pattern of the gel structure are in good accordance with the experimental results in the literature. Si–O–Al is found to be preferred over Si–O–Si in the N–A–S–H gel structure according to the amount of T–O–T bond angles and distribution of Si4(mAl). Pentacoordinate Al is identified in all simulated N–A–S–H models. It provides strong support to current knowledge that pentacoordinate Al in geopolymer does not only come from raw material. Furthermore, the structural analysis results also show that N–A–S–H gel with lower Si/Al ratios has a more cross-linked and compacted structure., The first author would like to acknowledge China Scholarship Council (Grant no. 201906150022) for financial support in this work. Jorge S. Dolado acknowledges the funding from the Gobierno Vasco-UPV/EHU (Project IT1246-19) and the Spanis Ministry of Science, Innovation and Universities (Projects PCI2019-103657 and RTI2018-098554-B-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geopolymer concrete performance study for high-temperature Thermal Energy Storage (TES) applications

  • Rahjoo, Mohammad
  • Goracci, Guido
  • Martauz, Pavel
  • Rojas, Esther
  • Dolado, Jorge S.
This article belongs to the Special Issue Green Deal in Construction and Building Materials., Solar energy is an energy intermittent source that faces a substantial challenge for its power dispatchability. Hence, concentrating solar power (CSP) plants and solar process heat (SPH) applications employ thermal energy storage (TES) technologies as a link between power generation and optimal load distribution. Ordinary Portland cement (OPC)-based materials are widely used in sensible TES, but their use is limited to operation temperatures below 400 to 500 °C because of thermal degradation processes. This work proposes a geopolymer (GEO)-based concrete as a suitable alternative to OPC concrete for TES that withstands high running temperatures, higher than 500 °C. To this end, thermophysical properties of a geopolymer-based concrete sample were initially measured experimentally; later, energy storage capacity and thermal behavior of the GEO sample were modeled numerically. In fact, different thermal scenarios were modeled, revealing that GEO-based concrete can be a sound choice due to its thermal energy storage capacity, high thermal diffusivity and capability to work at high temperature regimes., This work was born under the umbrella of the project “Energy storage solutions based on concrete (E-CRETE)” (RTI2018-098554-B-I00) funded by MCIN/AEI/10.13039/501100011033 (Program I+D+i RETOS INVESTIGACIÓN 2018). Mohammad Rahjoo acknowledges the grant PRE2019-087676 funded by MCIN/AEI/ 10.13039/501100011033 and co-financed by the European Social Fund under the 2019 call for grants for predoctoral contracts for the training of doctors contemplated in the State Training Subprogram of the State Program for the Promotion of Talent and its Employability in R&D&I, within the framework of the State Plan for Scientific and Technical Research and Innovation 2017–2020. Besides, the economic support from POVAZSKA is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrical conductive properties of 3D-printedconcrete composite with carbon nanofibers

  • Goracci, Guido
  • Salgado, David M.
  • Gaitero, Juan J.
  • Dolado, Jorge S.
This article belongs to the Special Issue Nanostructured Materials for Energy Applications., Electrical conductive properties in cement-based materials have received attention in recent years due to their key role in many innovative application (i.e., energy harvesting, deicing systems, electromagnetic shielding, and self-health monitoring). In this work, we explore the use 3D printing as an alternative method for the preparation of electrical conductive concretes. With this aim, the conductive performance of cement composites with carbon nanofibers (0, 1, 2.5, and 4 wt%) was explored by means of a combination of thermogravimetric analysis (TGA) and dielectric spectroscopy (DS) and compared with that of specimens prepared with the traditional mold method. The combination of TGA and DS gave us a unique insight into the electrical conductive properties, measuring the specimens’ performance while monitoring the amount in water confined in the porous network. Experimental evidence of an additional contribution to the electrical conductivity due to sample preparation is provided. In particular, in this work, a strong correlation between water molecules in interconnected pores and the σ(ω) values is shown, originating, mainly, from the use of the 3D printing technique., This work was born under the umbrella of the ECRETE project (RTI2018-098554-B-I00) funded by MCIN/AEI/10.13039/501100011033 (Program I+D+i RETOS INVESTIGACIÓN 2018), the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/501100011033 and co-founded by the European Union (Programación Conjunta Internacional 2019) and the project NRG-STORAGE (GA 870114) funded by the European Commission. Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal Energy Storage (TES) prototype based on geopolymer concrete for high-temperature applications

  • Rahjoo, Mohammad
  • Goracci, Guido
  • Gaitero, Juan J.
  • Martauz, Pavel
  • Rojas, Esther
  • Dolado, Jorge S.
This article belongs to the Topic Thermal Energy Transfer and Storage., Thermal energy storage (TES) systems are dependent on materials capable of operating at elevated temperatures for their performance and for prevailing as an integral part of industries. High-temperature TES assists in increasing the dispatchability of present power plants as well as increasing the efficiency in heat industry applications. Ordinary Portland cement (OPC)-based concretes are widely used as a sensible TES material in different applications. However, their performance is limited to operation temperatures below 400 °C due to the thermal degradation processes in its structure. In the present work, the performance and heat storage capacity of geopolymer-based concrete (GEO) have been studied experimentally and a comparison was carried out with OPC-based materials. Two thermal scenarios were examined, and results indicate that GEO withstand high running temperatures, higher than 500 °C, revealing higher thermal storage capacity than OPC-based materials. The high thermal energy storage, along with the high thermal diffusion coefficient at high temperatures, makes GEO a potential material that has good competitive properties compared with OPC-based TES. Experiments show the ability of geopolymer-based concrete for thermal energy storage applications, especially in industries that require feasible material for operation at high temperatures., This work was born under the umbrella of the project “Energy storage solutions based on concrete (E-CRETE)” (RTI2018-098554-B-I00) funded by MCIN/AEI/10.13039/501100011033 (Program I+D+i RETOS INVESTIGACIÓN 2018). Mohammad Rahjoo acknowledges the grant PRE2019-087676 funded by MCIN/AEI/10.13039/501100011033 and co-financed by the European Social Fund under the 2019 call for grants for predoctoral contracts for the training of doctors contemplated in the State Training Subprogram of the State Program for the Promotion of Talent and its Employability in R&D&I, within the framework of the State Plan for Scientific and Technical Research and Innovation 2017–2020. In addition, the economic support from POVAZSKA is acknowledged. Jorge S. Dolado acknowledges the funding from the Gobierno Vasco UPV/EHU (project no. IT1569-22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A numerical study of geopolymer concrete thermal energy storage: Benchmarking TES module design and optimizing thermal performance

  • Rahjoo, Mohammad
  • Rojas, Esther
  • Goracci, Guido
  • Gaitero, Juan J.
  • Martauz, Pavel
  • Dolado, Jorge S.
Geopolymer (GEO) concrete emerges as a potential high-temperature thermal energy storage (TES) material, offering a remarkable thermal storage capacity, approximately 3.5 times higher than regular Portland cement (OPC) concrete, without compromising its environmentally benign nature., This research dissects the application of GEO concrete as a high-temperature TES material, primarily focusing on its optimization and scalability. The introductory part of the study involves the development and validation of a three-dimensional numerical model using computational fluid dynamics (CFD). The model demonstrated an average accuracy rate of 5 %, as justified by empirical data. Later, a two-tiered investigation to determine the optimal design for GEO concrete TES systems was investigated. Three different geometries plus the impact of crucial parameters such as air velocity, tube diameter, and module size on the thermal storage capacity (Q) studied. It further extends into a parametric examination, exploring a variety of tube sizes, arrangements, and configurations. It is found that air velocity primarily influences Q., A subsequent phase provides an analysis of the thermodynamic effects brought by the inclusion of tubes within TES modules through an equivalent parametric study. It exposes the thermal resistance resulting from tube insertion. The study reinforces the superior thermal performance of tubeless GEO concrete TES configurations, as signified by overall heat transfer rate (Q̇). The study also signals the significant roles of key parameters in determining the temperature (T) and Q within TES unit using Pearson's correlation coefficient equation., As a final observation, this work emphasizes the sustained significance of on-site evaluations to consistently monitor the interplay between TES materials and high-temperature fluids (HTFs) over extended periods for viability analysis purposes., This work was born under the umbrella of the project “Energy storage solutions based on concrete (E-CRETE)” (RTI2018-098554-B-I00) funded by MCIN/AEI/10.13039/501100011033 (Program I+D+i RETOS INVESTIGACIÓN 2018). Mohammad Rahjoo acknowledges the grant PRE2019-087676 funded by MCIN/AEI/10.13039/501100011033 and co-financed by the European Social Fund under the 2019 call for grants for predoctoral contracts for the training of doctors contemplated in the State Training Subprogram of the State Program for the Promotion of Talent and its Employability in R&D&I, within the framework of the State Plan for Scientific and Technical Research and Innovation 2017–2020. In addition, the economic support from POVAZSKA is acknowledged. Jorge S. Dolado acknowledges the funding from the Gobierno Vasco UPV/EHU (project no. IT1569-22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomistic simulations, meso-scale analyses and experimental validation of thermal properties in ordinary Portland cement and geopolymer pastes

  • Caggiano, Antonio
  • Peralta, Ignacio
  • Fachinotti, Víctor D.
  • Goracci, Guido
  • Dolado, Jorge S.
Ordinary Portland Cement (OPC)- and alternative binder-based materials have been widely used in Thermal Energy Storage (TES) applications due to their excellent TES capacities, good mechanical properties and low-cost. In this attempt, this work proposes an upscaling procedure to model the TES properties of two hydrated pastes made of OPC and a Hybrid cement (i.e., an alternative H-Cement binder), the latter employed for a GEOpolymer-based composite (GEO). Firstly, an atomistic approach based on energy minimization and molecular dynamics is employed for modelling the thermal behaviors and heat storage capacities of CSH (calcium silicate hydrate) and NASH (sodium aluminosilicate hydrate) phases, being those the main phases for OPC-based paste and GEO, respectively. Then, an up-scaling optimization procedure and meso-scale FEM homogenization techniques are proposed to link the TES parameters of the atomistic main phases of OPC-based paste and GEO with the homogenized upper meso/macro scale values. To this end, the results of an experimental program on both OPC and GEO pastes have been considered as benchmark to calibrate/validate the numerical tools. Promising simulations at several scales and up-scaling procedures are demonstrated in terms of homogenized temperature-dependent heat capacity and thermal diffusivity, showing a good agreement with the experimental data of the analyzed mixtures., This work has been carried out under the umbrella of the Transborder laboratory LTC Green Concrete (https://greenconcretelab.com). We acknowledge the computing resources of the Donostia International Physics Center (DIPC). We also acknowledge the financial supports of: i) the grant RTI2018-098554-B-I00 of ECRETE project, funded by MCIN/AEI/10.13039/501100011033 and by ”ERDF A way of making Europe”; ii) the grant PCI2019-103657 of POROCM project, funded by MCIN/AEI/10.13039/501100011033 and co-funded by the European Commission; iii) the European Union’s Horizon 2020 research and innovation program under the grant agreement No: 870114; iv) the National Scientific and Technical Research Council (CONICET) of Argentina through the project “Computational design of functional thermal metamaterials in transient regime taking advantage of phase changes” (PIP 11220200101018CO), v) the National Agency for the Promotion of Research, Technological Development and Innovation (AGENCIA) of Argentina through the project “Computational design of metamaterials applied to the development of thermal diodes for building envelopes” (PICT 2020 SERIE A 03765), vi) the National Technological University (UTN) of Argentina, through the grant PID MAUTNFE0007745, and vii) the Technical University of Darmstadt for the “Future Talent (Guest Stay)” and “Career Bridging” Grants, both given to the second author of this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the role of surface roughness in concrete-based thermal energy storage systems: A computational study

  • Rahjoo, Mohammad
  • Rojas, Esther
  • Goracci, Guido
  • Dolado, Jorge S.
This study computationally investigates the effect of thermal energy storage (TES) material surface roughness on heat transfer fluid (HTF) flow dynamics and heat transfer capabilities. The motivation is to further understand systems where concrete as the TES material directly interfaces with air as the HTF, based on previous research suggesting potential benefits of avoiding differential thermal expansion issues associated with metallic tubes. A k-ε turbulence model in COMSOL Multiphysics examined air flow over concrete surfaces with five levels of roughness from 0 to 3 mm peak height. Increasing surface roughness enhances turbulence and significantly improves heat transfer and thermal storage performance, with 7 % higher charging efficiency and energy storage capacity and 55.6 % greater heat transfer rate from 0.3 to 3 mm roughness, despite a 138 % increase in pressure drop. Applying artificial surface modifications like indentations or fins could further optimize efficiency by amplifying heat transfer advantages of increased roughness while moderating pressure losses. This indicates a promising direction for future research on enhancing thermal energy storage through concrete surface optimization and substantiates the potential of concrete as an inexpensive, scalable, high performance TES material., This work was born under the umbrella of the project “Energy storage solutions based on concrete (E-CRETE)” (RTI2018-098554-B-I00) funded by MCIN/AEI/10.13039/501100011033 (Program I+D+i RETOS INVESTIGACIÓN 2018) and PCTE (PID2022-137845NB-C22) funded by MCIN/AEI/10.13039/501100011033. Mohammad Rahjoo acknowledges the grant PRE2019-087676 funded by MCIN/AEI/10.13039/501100011033 and co-financed by the European Social Fund under the 2019 call for grants for predoctoral contracts for the training of doctors contemplated in the State Training Subprogram of the State Program for the Promotion of Talent and its Employability in R&D&I, within the framework of the State Plan for Scientific and Technical Research and Innovation 2017–2020. In addition, the economic support from POVAZSKA is acknowledged. Jorge S. Dolado acknowledges the funding from the Gobierno Vasco UPV/EHU (project no. IT1569-22). This work is partially funded by Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (RED2022-134219-T)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Multi-Scale modelling and design of thermal energy storage (TES) devices based on cementitious materials

  • Rahjoo, Mohammad
[EN] This thesis investigates the potential of using geopolymer concrete as an alternative to ordinary Portland cement (OPC) for thermal energy storage (TES) systems, particularly for high-temperature applications. OPC concrete, the conventional material proposed in TES systems, exhibits thermal degradation at elevated temperatures, limiting its suitability for high-temperature applications. Geopolymer concrete, on the other hand, offers several advantages over OPC concrete for TES, including superior thermal stability, higher heat capacity, and lower environmental impact. To evaluate the potential of geopolymer concrete for TES, a broad research approach was employed, combining numerical modeling, experimental validation, and machine learning optimization. A 2-D numerical model was developed to simulate the thermal performance of TES prototypes made with OPC and geopolymer-based materials. The model successfully demonstrated the superior thermal performance of geopolymer concrete compared to OPC concrete, particularly at high temperatures. Experimental validation of the numerical model was conducted using real TES prototypes made of OPC and geopolymer concrete. The experiments confirmed the superior thermal stability and storage capacity of geopolymer concrete, with temperature differences up to 30-40°C and storage capacity up to 2-3.5x higher than OPC concrete. To further optimize the design and performance of TES systems based on geopolymer concrete, a 3-D computational model was developed. This model enabled systematic evaluation of design choices and operating parameters to maximize the performance of TES systems for up-scale approaches. Finally, machine learning techniques were employed to optimize the design and performance of TES systems based on solid materials. A decision tree machine learning (ML) model was trained to predict TES performance metrics based on a dataset generated from the validated numerical model. The ML model was then used in conjunction with multi-objective optimization to identify Pareto optimal solutions that balanced objectives such as efficiency and pressure drop for up-scale design., [ES] Esta tesis investiga el potencial del hormigón geopolimérico como alternativa al cemento Portland (OPC) para sistemas de almacenamiento de energía térmica (TES), particularmente para aplicaciones de alta temperatura. El hormigón de OPC, material convencional propuesto en los sistemas TES, presenta degradación térmica a temperaturas elevadas, lo que limita su idoneidad para las aplicaciones de alta temperatura. El hormigón geopolimérico, sin embargo, ofrece varias ventajas sobre el hormigón de OPC para TES, como una estabilidad térmica superior, una mayor capacidad calorífica y un menor impacto ambiental. Para evaluar el potencial del hormigón geopolimérico para TES, se empleó un enfoque de investigación amplio que combina modelado numérico, validación experimental y optimización de aprendizaje automático. Se desarrolló un modelo numérico bidimensional para simular el rendimiento térmico de prototipos TES fabricados con OPC y materiales a base de geopolímeros. El modelo demostró con éxito el rendimiento térmico superior del hormigón geopolimérico en comparación con el hormigón de OPC, especialmente a temperaturas altas. La validación experimental del modelo numérico se realizó utilizando prototipos TES reales fabricados con OPC y hormigón geopolimérico. Los experimentos confirmaron la superior estabilidad térmica y capacidad de almacenamiento del hormigón geopolimérico, con diferencias de temperatura de hasta 30-40 °C y capacidad de almacenamiento hasta 2-3,5 veces mayor que el hormigón de OPC. Para optimizar aún más el diseño y el rendimiento de los sistemas TES basados en hormigón geopolimérico, se desarrolló un modelo computacional en 3D. Este modelo permitió una evaluación sistemática de las opciones de diseño y los parámetros de operación para maximizar el rendimiento de los sistemas TES para enfoques de mayor escala. Finalmente, se emplearon técnicas de aprendizaje automático para optimizar el diseño y el rendimiento de los sistemas TES basados en materiales sólidos. Se entrenó un modelo de aprendizaje automático (ML) de árbol de decisiones para predecir métricas de rendimiento de TES basado en un conjunto de datos generado a partir del modelo numérico validado. El modelo ML se utilizó luego en conjunto con la optimización multiobjetivo para identificar soluciones Pareto óptimas que equilibraran objetivos como la eficiencia y la caída de presión para un diseño a mayor escala., ECRETE: Energy storage solutions based on CONCRETE - Proyectos de I+D+i Retos investigación 2018 (RTI2018) Project reference number: RTI2018-098554-B-I00 - https://www.ecrete.org/ • Grant PRE2019-087676 funded by MCIN/AEI/10.13039/501100011033 and cofinanced by the European Social Fund under the 2019 call for grants for predoctoral contracts for the training of doctors contemplated in the State Training Subprogram of the State Program for the Promotion of Talent and its Employability in R&D&I, within the framework of the State Plan for Scientific and Technical Research and Innovation 2017–2020. • International Union of Laboratories and Experts in Construction Materials, Systems and Structures (RILEM): Technical Committee 299-TES on thermal energy storage in cementitious composites. https://www.rilem.net/, Peer reviewed