Pasar al contenido principal

SOLUCIONES PARA EL ALMACENAMIENTO DE ENERGIA BASADAS EN CEMENTO Y HORMIGON.

PRE2019-087676

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geopolymer concrete performance study for high-temperature Thermal Energy Storage (TES) applications

  • Rahjoo, Mohammad
  • Goracci, Guido
  • Martauz, Pavel
  • Rojas, Esther
  • Dolado, Jorge S.
This article belongs to the Special Issue Green Deal in Construction and Building Materials., Solar energy is an energy intermittent source that faces a substantial challenge for its power dispatchability. Hence, concentrating solar power (CSP) plants and solar process heat (SPH) applications employ thermal energy storage (TES) technologies as a link between power generation and optimal load distribution. Ordinary Portland cement (OPC)-based materials are widely used in sensible TES, but their use is limited to operation temperatures below 400 to 500 °C because of thermal degradation processes. This work proposes a geopolymer (GEO)-based concrete as a suitable alternative to OPC concrete for TES that withstands high running temperatures, higher than 500 °C. To this end, thermophysical properties of a geopolymer-based concrete sample were initially measured experimentally; later, energy storage capacity and thermal behavior of the GEO sample were modeled numerically. In fact, different thermal scenarios were modeled, revealing that GEO-based concrete can be a sound choice due to its thermal energy storage capacity, high thermal diffusivity and capability to work at high temperature regimes., This work was born under the umbrella of the project “Energy storage solutions based on concrete (E-CRETE)” (RTI2018-098554-B-I00) funded by MCIN/AEI/10.13039/501100011033 (Program I+D+i RETOS INVESTIGACIÓN 2018). Mohammad Rahjoo acknowledges the grant PRE2019-087676 funded by MCIN/AEI/ 10.13039/501100011033 and co-financed by the European Social Fund under the 2019 call for grants for predoctoral contracts for the training of doctors contemplated in the State Training Subprogram of the State Program for the Promotion of Talent and its Employability in R&D&I, within the framework of the State Plan for Scientific and Technical Research and Innovation 2017–2020. Besides, the economic support from POVAZSKA is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal Energy Storage (TES) prototype based on geopolymer concrete for high-temperature applications

  • Rahjoo, Mohammad
  • Goracci, Guido
  • Gaitero, Juan J.
  • Martauz, Pavel
  • Rojas, Esther
  • Dolado, Jorge S.
This article belongs to the Topic Thermal Energy Transfer and Storage., Thermal energy storage (TES) systems are dependent on materials capable of operating at elevated temperatures for their performance and for prevailing as an integral part of industries. High-temperature TES assists in increasing the dispatchability of present power plants as well as increasing the efficiency in heat industry applications. Ordinary Portland cement (OPC)-based concretes are widely used as a sensible TES material in different applications. However, their performance is limited to operation temperatures below 400 °C due to the thermal degradation processes in its structure. In the present work, the performance and heat storage capacity of geopolymer-based concrete (GEO) have been studied experimentally and a comparison was carried out with OPC-based materials. Two thermal scenarios were examined, and results indicate that GEO withstand high running temperatures, higher than 500 °C, revealing higher thermal storage capacity than OPC-based materials. The high thermal energy storage, along with the high thermal diffusion coefficient at high temperatures, makes GEO a potential material that has good competitive properties compared with OPC-based TES. Experiments show the ability of geopolymer-based concrete for thermal energy storage applications, especially in industries that require feasible material for operation at high temperatures., This work was born under the umbrella of the project “Energy storage solutions based on concrete (E-CRETE)” (RTI2018-098554-B-I00) funded by MCIN/AEI/10.13039/501100011033 (Program I+D+i RETOS INVESTIGACIÓN 2018). Mohammad Rahjoo acknowledges the grant PRE2019-087676 funded by MCIN/AEI/10.13039/501100011033 and co-financed by the European Social Fund under the 2019 call for grants for predoctoral contracts for the training of doctors contemplated in the State Training Subprogram of the State Program for the Promotion of Talent and its Employability in R&D&I, within the framework of the State Plan for Scientific and Technical Research and Innovation 2017–2020. In addition, the economic support from POVAZSKA is acknowledged. Jorge S. Dolado acknowledges the funding from the Gobierno Vasco UPV/EHU (project no. IT1569-22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A numerical study of geopolymer concrete thermal energy storage: Benchmarking TES module design and optimizing thermal performance

  • Rahjoo, Mohammad
  • Rojas, Esther
  • Goracci, Guido
  • Gaitero, Juan J.
  • Martauz, Pavel
  • Dolado, Jorge S.
Geopolymer (GEO) concrete emerges as a potential high-temperature thermal energy storage (TES) material, offering a remarkable thermal storage capacity, approximately 3.5 times higher than regular Portland cement (OPC) concrete, without compromising its environmentally benign nature., This research dissects the application of GEO concrete as a high-temperature TES material, primarily focusing on its optimization and scalability. The introductory part of the study involves the development and validation of a three-dimensional numerical model using computational fluid dynamics (CFD). The model demonstrated an average accuracy rate of 5 %, as justified by empirical data. Later, a two-tiered investigation to determine the optimal design for GEO concrete TES systems was investigated. Three different geometries plus the impact of crucial parameters such as air velocity, tube diameter, and module size on the thermal storage capacity (Q) studied. It further extends into a parametric examination, exploring a variety of tube sizes, arrangements, and configurations. It is found that air velocity primarily influences Q., A subsequent phase provides an analysis of the thermodynamic effects brought by the inclusion of tubes within TES modules through an equivalent parametric study. It exposes the thermal resistance resulting from tube insertion. The study reinforces the superior thermal performance of tubeless GEO concrete TES configurations, as signified by overall heat transfer rate (Q̇). The study also signals the significant roles of key parameters in determining the temperature (T) and Q within TES unit using Pearson's correlation coefficient equation., As a final observation, this work emphasizes the sustained significance of on-site evaluations to consistently monitor the interplay between TES materials and high-temperature fluids (HTFs) over extended periods for viability analysis purposes., This work was born under the umbrella of the project “Energy storage solutions based on concrete (E-CRETE)” (RTI2018-098554-B-I00) funded by MCIN/AEI/10.13039/501100011033 (Program I+D+i RETOS INVESTIGACIÓN 2018). Mohammad Rahjoo acknowledges the grant PRE2019-087676 funded by MCIN/AEI/10.13039/501100011033 and co-financed by the European Social Fund under the 2019 call for grants for predoctoral contracts for the training of doctors contemplated in the State Training Subprogram of the State Program for the Promotion of Talent and its Employability in R&D&I, within the framework of the State Plan for Scientific and Technical Research and Innovation 2017–2020. In addition, the economic support from POVAZSKA is acknowledged. Jorge S. Dolado acknowledges the funding from the Gobierno Vasco UPV/EHU (project no. IT1569-22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the role of surface roughness in concrete-based thermal energy storage systems: A computational study

  • Rahjoo, Mohammad
  • Rojas, Esther
  • Goracci, Guido
  • Dolado, Jorge S.
This study computationally investigates the effect of thermal energy storage (TES) material surface roughness on heat transfer fluid (HTF) flow dynamics and heat transfer capabilities. The motivation is to further understand systems where concrete as the TES material directly interfaces with air as the HTF, based on previous research suggesting potential benefits of avoiding differential thermal expansion issues associated with metallic tubes. A k-ε turbulence model in COMSOL Multiphysics examined air flow over concrete surfaces with five levels of roughness from 0 to 3 mm peak height. Increasing surface roughness enhances turbulence and significantly improves heat transfer and thermal storage performance, with 7 % higher charging efficiency and energy storage capacity and 55.6 % greater heat transfer rate from 0.3 to 3 mm roughness, despite a 138 % increase in pressure drop. Applying artificial surface modifications like indentations or fins could further optimize efficiency by amplifying heat transfer advantages of increased roughness while moderating pressure losses. This indicates a promising direction for future research on enhancing thermal energy storage through concrete surface optimization and substantiates the potential of concrete as an inexpensive, scalable, high performance TES material., This work was born under the umbrella of the project “Energy storage solutions based on concrete (E-CRETE)” (RTI2018-098554-B-I00) funded by MCIN/AEI/10.13039/501100011033 (Program I+D+i RETOS INVESTIGACIÓN 2018) and PCTE (PID2022-137845NB-C22) funded by MCIN/AEI/10.13039/501100011033. Mohammad Rahjoo acknowledges the grant PRE2019-087676 funded by MCIN/AEI/10.13039/501100011033 and co-financed by the European Social Fund under the 2019 call for grants for predoctoral contracts for the training of doctors contemplated in the State Training Subprogram of the State Program for the Promotion of Talent and its Employability in R&D&I, within the framework of the State Plan for Scientific and Technical Research and Innovation 2017–2020. In addition, the economic support from POVAZSKA is acknowledged. Jorge S. Dolado acknowledges the funding from the Gobierno Vasco UPV/EHU (project no. IT1569-22). This work is partially funded by Ministerio de Ciencia e Innovación—Agencia Estatal de Investigación (AEI) (RED2022-134219-T)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Multi-Scale modelling and design of thermal energy storage (TES) devices based on cementitious materials

  • Rahjoo, Mohammad
[EN] This thesis investigates the potential of using geopolymer concrete as an alternative to ordinary Portland cement (OPC) for thermal energy storage (TES) systems, particularly for high-temperature applications. OPC concrete, the conventional material proposed in TES systems, exhibits thermal degradation at elevated temperatures, limiting its suitability for high-temperature applications. Geopolymer concrete, on the other hand, offers several advantages over OPC concrete for TES, including superior thermal stability, higher heat capacity, and lower environmental impact. To evaluate the potential of geopolymer concrete for TES, a broad research approach was employed, combining numerical modeling, experimental validation, and machine learning optimization. A 2-D numerical model was developed to simulate the thermal performance of TES prototypes made with OPC and geopolymer-based materials. The model successfully demonstrated the superior thermal performance of geopolymer concrete compared to OPC concrete, particularly at high temperatures. Experimental validation of the numerical model was conducted using real TES prototypes made of OPC and geopolymer concrete. The experiments confirmed the superior thermal stability and storage capacity of geopolymer concrete, with temperature differences up to 30-40°C and storage capacity up to 2-3.5x higher than OPC concrete. To further optimize the design and performance of TES systems based on geopolymer concrete, a 3-D computational model was developed. This model enabled systematic evaluation of design choices and operating parameters to maximize the performance of TES systems for up-scale approaches. Finally, machine learning techniques were employed to optimize the design and performance of TES systems based on solid materials. A decision tree machine learning (ML) model was trained to predict TES performance metrics based on a dataset generated from the validated numerical model. The ML model was then used in conjunction with multi-objective optimization to identify Pareto optimal solutions that balanced objectives such as efficiency and pressure drop for up-scale design., [ES] Esta tesis investiga el potencial del hormigón geopolimérico como alternativa al cemento Portland (OPC) para sistemas de almacenamiento de energía térmica (TES), particularmente para aplicaciones de alta temperatura. El hormigón de OPC, material convencional propuesto en los sistemas TES, presenta degradación térmica a temperaturas elevadas, lo que limita su idoneidad para las aplicaciones de alta temperatura. El hormigón geopolimérico, sin embargo, ofrece varias ventajas sobre el hormigón de OPC para TES, como una estabilidad térmica superior, una mayor capacidad calorífica y un menor impacto ambiental. Para evaluar el potencial del hormigón geopolimérico para TES, se empleó un enfoque de investigación amplio que combina modelado numérico, validación experimental y optimización de aprendizaje automático. Se desarrolló un modelo numérico bidimensional para simular el rendimiento térmico de prototipos TES fabricados con OPC y materiales a base de geopolímeros. El modelo demostró con éxito el rendimiento térmico superior del hormigón geopolimérico en comparación con el hormigón de OPC, especialmente a temperaturas altas. La validación experimental del modelo numérico se realizó utilizando prototipos TES reales fabricados con OPC y hormigón geopolimérico. Los experimentos confirmaron la superior estabilidad térmica y capacidad de almacenamiento del hormigón geopolimérico, con diferencias de temperatura de hasta 30-40 °C y capacidad de almacenamiento hasta 2-3,5 veces mayor que el hormigón de OPC. Para optimizar aún más el diseño y el rendimiento de los sistemas TES basados en hormigón geopolimérico, se desarrolló un modelo computacional en 3D. Este modelo permitió una evaluación sistemática de las opciones de diseño y los parámetros de operación para maximizar el rendimiento de los sistemas TES para enfoques de mayor escala. Finalmente, se emplearon técnicas de aprendizaje automático para optimizar el diseño y el rendimiento de los sistemas TES basados en materiales sólidos. Se entrenó un modelo de aprendizaje automático (ML) de árbol de decisiones para predecir métricas de rendimiento de TES basado en un conjunto de datos generado a partir del modelo numérico validado. El modelo ML se utilizó luego en conjunto con la optimización multiobjetivo para identificar soluciones Pareto óptimas que equilibraran objetivos como la eficiencia y la caída de presión para un diseño a mayor escala., ECRETE: Energy storage solutions based on CONCRETE - Proyectos de I+D+i Retos investigación 2018 (RTI2018) Project reference number: RTI2018-098554-B-I00 - https://www.ecrete.org/ • Grant PRE2019-087676 funded by MCIN/AEI/10.13039/501100011033 and cofinanced by the European Social Fund under the 2019 call for grants for predoctoral contracts for the training of doctors contemplated in the State Training Subprogram of the State Program for the Promotion of Talent and its Employability in R&D&I, within the framework of the State Plan for Scientific and Technical Research and Innovation 2017–2020. • International Union of Laboratories and Experts in Construction Materials, Systems and Structures (RILEM): Technical Committee 299-TES on thermal energy storage in cementitious composites. https://www.rilem.net/, Peer reviewed