Pasar al contenido principal

EXCITACIONES ELECTRONICAS Y DINAMICA EN SUPERFICIES Y NANOESTRUCTURAS

PID2019-105488GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 58
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Achieving high hydrogen evolution reaction activity of a Mo2C monolayer

  • Lou, Huan
  • Yu, Tong
  • Ma, Jiani
  • Zhang, Shoutao
  • Bergara, Aitor
  • Yang, Guochun
Two-dimensional Mo2C materials (1T and 2H phases) have emerged as promising electrocatalysts for the hydrogen evolution reaction (HER) due to their low cost, inherent metallicity, and high stability. Unfortunately, the catalytic activity of Mo2C is lower than that of Pt, and it needs to be substantially improved for practical applications. It is necessary and urgent to consider the effect of synergetic interactions among defects, functions, and strain on the HER activity. In this study, the geometric structures, electronic properties, and the HER activity of the Mo2C monolayer, with vacancy defects (i.e. Mo and C), oxygen functionalization, and strain, are studied by using first-principles calculations. According to our results, the combination of Mo vacancies, which can be obtained under C-rich conditions, and oxygen functionalization is the most effective way to improve the HER activity of 1T- and 2H-Mo2C. Considering the abundant active sites and optimal Gibbs free energy of hydrogen adsorption, the 1T phase we obtained shows excellent HER activity even at high H coverage and improves the utilization of active sites, for which the HER activity is comparable to that of Pt. This can be attributed to the fact that oxygen atoms gain more electrons from Mo2C, which weakens the strength of the O–H bond. Our work provides not only an opportunity to better understand the catalytic mechanism, but also a guide to achieving high HER activity of a Mo2C monolayer., The authors acknowledge the funding support from the Natural Science Foundation of China under No. 21873017, 21573037, 11704062, and 51732003, the Postdoctoral Science Foundation of China under grant 2013M541283, and the Natural Science Foundation of Jilin Province (20190201231JC). This work was carried out at National Supercomputer Center in Tianjin, and the calculations were performed on TianHe-1 (A). A. B. acknowledges financial support from the Spanish Ministry of Science and Innovation (PID2019-105488GB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Energy-based plasmonicity index to characterize optical resonances in nanostructures

  • Müller, Marvin M.
  • Kosik, Miriam
  • Pelc, Marta
  • Bryant, Garnett W.
  • Ayuela, Andrés
  • Rockstuhl, Carsten
  • Słowik, Karolina
Resonances sustained by plasmonic nanoparticles provide extreme electric field confinement and enhancement into the deep subwavelength domain for a plethora of applications. Recent progress in nanofabrication made it even possible to tailor the properties of nanoparticles consisting of only a few hundred atoms. These nanoparticles support both single-particle-like resonances and collective plasmonic charge density oscillations. Prototypical systems sustaining both features are graphene nanoantennas. In pushing the frontier of nanoscience, traditional identification, and classification of such resonances is at stake again. We show that in such nanostructures, the concerted electron cloud oscillation in real space does not necessarily come along with collective dynamics of conduction band electrons in energy space. This unveils an urgent need for a discussion of how a plasmon in nanostructures should be defined. Here, we propose to define it relying on energy space dynamics. The unambiguous identification of the plasmonic nature of a resonance is crucial to find out whether desirable plasmon-assisted features, such as frequency conversion processes, can be expected from a resonance. We elaborate an energy-based figure of merit that classifies the nature of resonances in nanostructures, motivated by tight binding simulations with a toy model consisting of a linear chain of atoms. We apply afterward the proposed figure of merit to a doped hexagonal graphene nanoantenna, which is known to support plasmons in the near infrared and single-particle-like transitions in the visible., M.M.M. acknowledges financial support through the Research Travel Grant by the Karlsruhe House of Young Scientists (KHYS). M.M.M. and C.R. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)—project number 378579271—within project RO 3640/8-1 and from the VolkswagenStiftung. M.M.M. is grateful for the support of the Toruń Astrophysics/Physics Summer Program TAPS 2019 and the PROM project no. PPI/PRO/2018/1/00016/U/001 by the Polish National Agency for Academic Exchange. M.M.M., M.K., and K.S. acknowledge the hospitality of the Donostia International Physics Center. M.K. acknowledges the financial support from the Foundation for Polish Science (FNP) (project First Team/2017-3/20 cofinanced by the European Union under the European Regional Development Fund). M.P. and A.A. acknowledge financial support by project PID2019-105488GB-I00 of the Spanish Ministry of Science and Innovation, and the Gobierno Vasco—UPV/EHU project IT1246-19. K.S. acknowledges support from the National Science Centre, Poland (project no. 2016/23/G/ST3/0404)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Weyl fermions, Fermi arcs, and minority-spin carriers in ferromagnetic CoS2

  • Schröter, Niels B. M.
  • Robredo, Iñigo
  • Klemenz, Sebastian
  • Kirby, Robert J.
  • Krieger, J. A.
  • Pei, Ding
  • Yu, Tianlun
  • Stolz, Samuel
  • Schmitt, Thorsten
  • Dudin, Pavel
  • Kim, Timur
  • Cacho, Cephise
  • Schnyder, Andreas
  • Bergara, Aitor
  • Strocov, Vladimir N.
  • Juan, Fernando de
  • Vergniory, Maia G.
  • Schoop, Leslie M.
Magnetic Weyl semimetals are a newly discovered class of topological materials that may serve as a platform for exotic phenomena, such as axion insulators or the quantum anomalous Hall effect. Here, we use angle-resolved photoelectron spectroscopy and ab initio calculations to discover Weyl cones in CoS2, a ferromagnet with pyrite structure that has been long studied as a candidate for half-metallicity, which makes it an attractive material for spintronic devices. We directly observe the topological Fermi arc surface states that link the Weyl nodes, which will influence the performance of CoS2 as a spin injector by modifying its spin polarization at interfaces. In addition, we directly observe a minority-spin bulk electron pocket in the corner of the Brillouin zone, which proves that CoS2 cannot be a true half-metal., This work was supported by NSF through the Princeton Center for Complex Materials, a Materials Research Science and Engineering Center DMR-1420541, by Princeton University through the Princeton Catalysis Initiative, and by the Gordon and Betty Moore Foundation through grant GBMF9064 to L.M.S. F.d.J. acknowledges funding from the Spanish MCI/AEI through grant no. PGC2018-101988-B-C21. M.G.V. and F.J. acknowledge funding from the Basque Government through grant PIBA 2019-81. M.G.V. and I.R. acknowledge the Spanish Ministerio de Ciencia e Innovacion (grant number PID2019-109905GB-C21). N.B.M.S. was supported by Microsoft. A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (PID2019-105488GB-I00). The work of S.S. was supported by the Swiss National Science Foundation under grant no. 159690. D.P. acknowledges the support from the Chinese Scholarship Council. J.A.K. acknowledges support by the Swiss National Science Foundation (SNF-Grant no. 200021_165910)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Belite cements and their activation

  • Cuesta, Ana
  • Ayuela, Andrés
  • Aranda, Miguel A.
Belite cements, BCs, containing mainly belite, alite and calcium aluminates, are currently used as low heat cements. These binders produce high amounts of C–S–H gel and have very good durability properties which are reviewed. Additional advantages include: (i) lower limestone demand, with lower associated CO2 emissions; (ii) lower energy demand; (iii) lower kiln operating temperature, which means lowering CO2 and NOx emissions from fuel burning; and (iv) lower temperature increase at early hydration age. However, early-age strength developments are not competitive with those of Portland cements. Hence, to improve their early-age strength developments is a research priority known as activation. This enhancement can be attained by three compatible approaches: (i) chemical, (ii) physical; and (iii) admixture activations. The current research status for BCs activation is reviewed including: cost-effective element substitutions to stabilize high-temperature forms; fast cooling, milling and mild temperature hydration as physical activation; and the use of C–S–H seeds as admixture activation. After discussion of the resulting microstructures, a research outlook is exercised., The work in Malaga has been supported by BIA2017-82391-R research grant, which is co-funded by FEDER. The work in San Sebastián was supported by PID2019-105488GB-I00 research grant, the Gobierno Vasco UPV/EHU (Project No. IT-1246-19), and the EIG CONCERT-Japan 5th Joint Call on Functional Porous Materials (Project No. PCI2019-103657-POROPCM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence for a spin acoustic surface plasmon from inelastic atom scattering

  • Benedek, Giorgio
  • Bernasconi, Marco
  • Campi, Davide
  • Silkin, Igor V.
  • Chernov, I. P.
  • Silkin, Viatcheslav M.
  • Chulkov, Eugene V.
  • Echenique, Pedro M.
  • Toennies, J. P.
  • Anemone, G.
  • Al Taleb, Amjad
  • Miranda, Rodolfo
  • Farías, Daniel
Closed-shell atoms scattered from a metal surface exchange energy and momentum with surface phonons mostly via the interposed surface valence electrons, i.e., via the creation of virtual electron-hole pairs. The latter can then decay into surface phonons via electron-phonon interaction, as well as into acoustic surface plasmons (ASPs). While the first channel is the basis of the current inelastic atom scattering (IAS) surface-phonon spectroscopy, no attempt to observe ASPs with IAS has been made so far. In this study we provide evidence of ASP in Ni(111) with both Ne atom scattering and He atom scattering. While the former measurements confirm and extend so far unexplained data, the latter illustrate the coupling of ASP with phonons inside the surface-projected phonon continuum, leading to a substantial reduction of the ASP velocity and possibly to avoided crossing with the optical surface phonon branches. The analysis is substantiated by a self-consistent calculation of the surface response function to atom collisions and of the first-principle surface-phonon dynamics of Ni(111). It is shown that in Ni(111) ASP originate from the majority-spin Shockley surface state and are therefore collective oscillation of surface electrons with the same spin, i.e. it represents a new kind of collective quasiparticle: a Spin Acoustic Surface Plasmon (SASP)., The work of I.V.S. is supported by the Ministry of Science and Higher Education of the Russian Federation for funding in framework of State Task (No. 0721-2020-0033). V.M.S. and P.M.E. acknowledge support from the Spanish Ministry of Science and Innovation (Grant No. PID2019-105488GB-I00) and D.F. from Grant No. PID2019-109525RB-I00. E.V.C. acknowledges support from Saint Petersburg State University (project ID No. 51126254). R.M. and D.F. acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M). IMDEA Nanociencia acknowledges support from the ’Severo Ochoa’ Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). Part of the calculations was performed at the SKIF-Cyberia supercomputer at the National Research Tomsk State University (Russian Federation) and the Supercomputer Center of D.I.P.C. (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Normal and anomalous self-healing mechanism of crystalline calcium silicate hydrates

  • Dupuis, Romain
  • Moon, Juhyuk
  • Jeong, Yeonung
  • Taylor, Rae
  • Kang, Sung-Hoon
  • Manzano, Hegoi
  • Ayuela, Andrés
  • Monteiro, Paulo
  • Dolado, Jorge S.
The origin of different stability of crystalline calcium silicate hydrates was investigated. The tobermorite crystal has been used as an analog of cement hydrate that is being mostly manufactured material on earth. Normal tobermorite is thermally unstable and transforms to amorphous at low pressure. Meanwhile, anomalous tobermorite with high Al content does not significantly transform under high pressure or high temperature. Conducted X-ray absorption spectroscopy explains the weak stability of normal tobermorite which was originally hypothesized by the role of zeolitic Ca ions in the cavities of silicate chains. Atomic simulations reproduced the experimentally observed trend of pressure behavior once the ideal structures were modified to account for the Al content as well as the chain defects. The simulations also suggested that the stability of tobermorite under stress could be rationalized as a self-healing mechanism in which the structural instabilities were accommodated by a global sliding of the CaO layer., J.M. acknowledges support by a grant (20SCIP-C159063-01) from Construction Technology Research Program funded by Ministry of Land, Infrastructure and Transport of Korean government. H.M. acknowledges the financial support from the Gobierno Vasco (project IT912-16). The work in San Sebastián (R.D., J.S.D, A.A) was supported by the Spanish Ministry of Science and Innovation with RTI2018-098554-B-I00, PID2019-105488GB-I00 and PCI2019-103657 research grants, the Gobierno Vasco UPV/EHU (Project No. IT-1246-19), and the European Commission from the NRG-STORAGE project (GA 870114). The Institute of Engineering Research in Seoul National University provided research facilities for this work. The Ca-XAS and HPXRD experiments were performed at XAFCA beamline in Singapore Synchrotron Light Source (SSLS) and 12.2.2 beamline in Advanced Light Source (ALS), respectively. The ALS supported by a DOE Office of Science User Facility under contract no. DE-AC02-05CH11231 and the Consortium for Materials Properties Research in Earth Sciences under NSF Cooperative Agreement EAR 1606856., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface plasmons on Pd(110): An ab initio calculation

  • Muniain, Unai
  • Esteban, Ruben
  • Chernov, I. P.
  • Aizpurua, Javier
  • Silkin, Viatcheslav M.
The surface excitation spectra of the Pd(110) surface is analyzed in the framework of the time-dependent density functional theory. The ab initio electronic structure of this surface is included into the evaluation of the surface response function using a linear response approach. At small momentum transfer the extrapolated energy of the surface plasmon is close to electron-energy-loss-spectroscopy measurements and can be understood considering the bulk Pd dielectric function. However, upon momentum increase the evaluated dispersion of the surface plasmon presents significant discrepancies with the published experimental data. While the experimental surface plasmon dispersion initially presents a strong negative slope, our calculations indicate a weak positive dispersion at all finite momentum transfers where this collective excitation is observed. Interestingly, we do not observe any noticeable effect on the collective surface excitations induced by the large number of surface states in the valence band of Pd(110). These states do not produce any additional mode at energies below the surface plasmon., We acknowledge funding from the Project of the Basque Government for consolidated groups of the Basque University, through the Department of Universities (Q-NANOFOT IT1164-19) and Project No. PI2017-30 of the Departamento de Educación, Política Lingüística y Cultura of the Basque Government. U.M., R.E., and J.A. acknowledge support from the Spanish Ministry of Science and Innovation (Grant No. PID2019-107432GB-I00). V.M.S. acknowledges support from the Spanish Ministry of Science and Innovation (Grant No. PID2019–105488GB–I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Semiconducting MnB5 monolayer as a potential photovoltaic material

  • Han, Fanjunjie
  • Yu, Tong
  • Qu, Xin
  • Bergara, Aitor
  • Yang, Guochun
Exploring new two-dimensional (2D) materials is of great significance for both basic research and practical applications. Although boron can form various 3D and 2D allotropes due to its ease of forming multi-center bonds, the coexistence of honeycomb and kagome boron structures has never been observed in any 2D material yet. In this article we apply first-principle swarm structural searches to predict the existence of a stable MnB5 structure, consisting of a sandwich of honeycomb and kagome borophenes. More interestingly, a MnB5 nanosheet is a semiconductor with a band gap of 1.07 eV and a high optical absorption in a broad band, which satisfies the requirements of a very good photovoltaic material. Upon moderate strain, MnB5 undergoes a conversion from an indirect to a direct band gap semiconductor. The power conversion efficiency of a heterostructure solar cell made of MnB5 is up to 18%. The MnB5 nanosheet shows a robust dynamical and thermal stability, stemming from the presence of intra- and interlayer multi-center σ and π bonds. These characteristics make MnB5 a promising photovoltaic material., The authors acknowledge the funding supports from the Natural Science Foundation of China under Nos. 21873017, 21573037, 11704062, and 51732003,the Postdoctoral Science Foundation of China under Grant 2013M541283, the Natural Science Foundation of Jilin Province (20190201231JC), the ‘111’ Project (No. B13013). The work was carried out at National Supercomputer Center in Tianjin, and the calculations were performed on TianHe-1 (A). AB acknowledges financial support from the Spanish Ministry of Science and Innovation (PID2019-105488GB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anisotropic and high-mobility C3S monolayer as a photocatalyst for water splitting

  • Tang, Meng
  • Wang, Bo
  • Lou, Huan
  • Li, Fei
  • Bergara, Aitor
  • Yang, Guochun
Taking into account the high conductivity and stability of carbon materials, such as graphene, and the strong polar covalent bonding character of main-group compounds, we explore potential 2D materials in the C–S binary system through first-principles structure search calculations. Herein, a hitherto unknown semiconducting C3S monolayer is identified, consisting of well-known n-biphenyl and S atom linked benzenes, exhibiting an obvious direction-dependent atomic arrangement. Thus, it exhibits anisotropic mechanical properties and carrier mobility. Its electron mobility reaches 2.14 × 104 cm2 V–1 s–1 in the b direction, along which n-biphenyl units are arranged, and is much higher than that in the well-used MoS2 monolayer and black phosphorus. Meanwhile, the C3S monolayer has high optical absorption coefficients (105 cm–1), high thermal and dynamical stabilities, and a moderate ability to split water. All these desirable properties make the C3S monolayer a promising candidate for applications in novel optoelectronic devices., The authors acknowledge funding support from the Natural Science Foundation of China under Nos. 21873017 and 21573037, the Postdoctoral Science Foundation of China under Grant 2013M541283, the Natural Science Foundation of Jilin Province (20190201231JC), and the Natural Science Foundation of Hebei Province (B2021203030). The work was carried out at National Supercomputer Center in Tianjin, and the calculations were performed on TianHe-1 (A). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (PID2019-105488GB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anomalous high-temperature superconductivity in YH6

  • Troyan, Ivan A.
  • Semenok, Dmitrii V.
  • Kvashnin, Аlexander G.
  • Sadakov, Andrey V.
  • Sobolevskiy, Oleg A.
  • Pudalov, Vladimir M.
  • Ivanova, Anna G.
  • Prakapenka, Vitali B.
  • Greenberg, Eran
  • Gavriliuk, Alexander G.
  • Struzhkin, Viktor V.
  • Bergara, Aitor
  • Errea, Ion
  • Bianco, Raffaello
  • Calandra, Matteo
  • Mauri, Francesco
  • Monacelli, Lorenzo
  • Akashi, Ryosuke
  • Oganov, Artem R.
Pressure-stabilized hydrides are a new rapidly growing class of high-temperature superconductors, which is believed to be described within the conventional phonon-mediated mechanism of coupling. Here, the synthesis of one of the best-known high-TC superconductors—yttrium hexahydride 𝐼𝑚3⎯⎯𝑚 -YH6 is reported, which displays a superconducting transition at ≈224 K at 166 GPa. The extrapolated upper critical magnetic field Bc2(0) of YH6 is surprisingly high: 116–158 T, which is 2–2.5 times larger than the calculated value. A pronounced shift of TC in yttrium deuteride YD6 with the isotope coefficient 0.4 supports the phonon-assisted superconductivity. Current–voltage measurements show that the critical current IC and its density JC may exceed 1.75 A and 3500 A mm−2 at 4 K, respectively, which is higher than that of the commercial superconductors, such as NbTi and YBCO. The results of superconducting density functional theory (SCDFT) and anharmonic calculations, together with anomalously high critical magnetic field, suggest notable departures of the superconducting properties from the conventional Migdal–Eliashberg and Bardeen–Cooper–Schrieffer theories, and presence of an additional mechanism of superconductivity., The work on the high-pressure experiments was supported by the Ministry of Science and Higher Education of the Russian Federation within the state assignment of the FSRC “Crystallography and Photonics” of RAS and by the Russian Science Foundation (project no. 19-12-00414). A.G.G. acknowledges the use of the facilities of the Center for Collective Use “Accelerator Center for Neutron Research of the Structure of Substance and Nuclear Medicine” of the INR RAS. A.G.K. thanks the Russian Foundation for Basic Research (project no. 19-03-00100) for the financial support of this work. A.R.O., D.V.S., and A.G.K. thank the Russian Science Foundation (grant 19-72-30043). The reported study was funded by the RFBR, project 20-32-90099. A.R.O and D.V.S. thank the Ministry of Science and Higher Education agreement No. 075-15-2020-808. Portions of this work were performed at GeoSoilEnviroCARS (The University of Chicago, Sector 13), Advanced Photon Source (APS), Argonne National Laboratory. GeoSoilEnviroCARS was supported by the National Science Foundation—Earth Sciences (EAR-1634415) and Department of Energy—GeoSciences (DE-FG02-94ER14466). Use of the GSECARS Raman Lab System was supported by the NSF MRI Proposal (EAR-1531583). This research used the resources of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under contract no. DE-AC02-06CH11357 and R.B. acknowledges the support from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement no. 802533). R.B. thankfully acknowledges the computer resources at Altamira and the technical support provided by Physics Institute of Cantabria (IFCA) (RES-FI-2020-3-0028). The research used resources of the LPI Shared Facility Center. A.V.S., O.A.S. and V.M.P. acknowledge support of the state assignment of the Ministry of Science and Higher Education of the Russian Federation (Project No. 0023-2019-0005). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (PID2019-105488GB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ba with unusual oxidation states in Ba chalcogenides under pressure

  • Li, Fei
  • Zhang, Xiaohua
  • Fu, Yang
  • Wang, Yanchao
  • Bergara, Aitor
  • Yang, Guochun
The preparation of compounds with novel atomic oxidation states and emergent properties is of fundamental interest in chemistry. As s-block elements, alkali-earth metals invariably show a +2 formal oxidation state at normal conditions, and among them, barium (Ba) presents the strongest chemical reactivity. Herein, we propose that novel valence states of Ba can be achieved in pressure-induced chalcogenides, where it also shows a feature of 5d-elements. First-principles swarm-intelligence structural search calculations identify three novel stoichiometric compounds: BaCh4 (Ch = O, S) containing Ba2+, Ba3Ch2 (Ch = S, Se, Te) with Ba+ and Ba2+, and Ba2Ch (Ch = Se, Te) with Ba+ cations. The pressure-induced drop of the Ba 5d level relative to Ba 6s is responsible for this unusual oxidation state. These compounds display captivating structural characters, such as Ba-centered polyhedra and chain-shaped Ch units. More interestingly still, the interaction between two Ba+ ions ensures their structural stability., The authors acknowledge funding support from the Natural Science Foundation of China under Nos. 21873017 and 21573037, the Postdoctoral Science Foundation of China under grant no. 2013M541283, and the Natural Science Foundation of Jilin Province (20190201231JC). The work was carried out at the National Supercomputer Center in Tianjin, and the calculations were performed on TianHe-1 (A). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (PID2019-105488GB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cubic Hall viscosity in three-dimensional topological semimetals

  • Robredo, Iñigo
  • Rao, Pranav
  • Juan, Fernando de
  • Mañes, Juan L.
  • Cortijo, Alberto
  • Vergniory, Maia G.
  • Bradlyn, Barry
The nondissipative (Hall) viscosity is known to play an interesting role in two-dimensional (2D) topological states of matter, in the hydrodynamic regime of correlated materials, and in classical active fluids with broken time-reversal symmetry (TRS). However, generalizations of these effects to 3D have remained elusive. In this work, we address this question by studying the Hall viscoelastic response of 3D crystals. We show that for systems with tetrahedral symmetries, there exist new, intrinsically 3D Hall viscosity coefficients that cannot be obtained via a reduction to a quasi-2D system. To study these coefficients, we specialize to a theoretically and experimentally motivated tight-binding model for a chiral magnetic metal in (magnetic) space group [(M)SG] P213 (No. 198.9), a nonpolar group of recent experimental interest that hosts both chiral magnets and topological semimetals (TSMs). Using the Kubo formula for viscosity, we compute two forms of the Hall viscosity, phonon and “momentum” (conventional) and show that for the tight-binding model we consider, both forms realize the novel cubic Hall viscosity. We conclude by discussing the implication of our results for transport in 2D magnetic metals and discuss some candidate materials in which these effects may be observed., P.R. and B.B. acknowledge support from the Alfred P. Sloan Foundation, and the National Science foundation under Grant No. DMR-1945058. M.G.V. and I.R. acknowledge the Spanish Ministerio de Ciencia e Innovacion (Grant No. PID2019-109905GB-C21). A.C. acknowledges financial support through European Union structural funds, the Comunidad Autonoma de Madrid (CAM) NMAT2DCM Program (S2018-NMT-4511), and the Ramon y Cajal program through the Grant No. RYC2018-023938. A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (PID2019-105488GB-I00). The work of J.L.M. has been supported by Spanish Science Ministry Grant No. PGC2018-094626-B-C21 (MCIU/AEI/FEDER, EU) and Basque Government Grant No. IT979-16. This material is based on work supported by the National Science Foundation Graduate Research Fellowship Program under Grant No. DGE-1746047., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Do calmodulin binding IQ motifs have built-in capping domains?

  • Muguruza-Montero, Arantza
  • Ramis, Rafael
  • Núñez, Eider
  • Ballesteros, Oscar R.
  • Ibarluzea, Markel G.
  • Araujo, Ariane
  • Alicante Martínez, Sara
  • Urrutia, Janire
  • Leonardo, Aritz
  • Bergara, Aitor
  • Villarroel, Álvaro
Most calmodulin (CaM) targets are α-helices. It is not clear if CaM induces the adoption of an α-helix configuration to its targets or if those targets are selected as they spontaneously adopt an α-helical conformation. Other than an α-helix propensity, there is a great variety of CaM targets with little more in common. One exception to this rule is the IQ site that can be recognized in a number of targets, such as those ion channels belonging to the KCNQ family. Although there is negligible sequence similarity between the IQ motif and the docking site on SK2 channels, both adopt a similar three-dimensional disposition. The isolated SK2 target presents a pre-folded core region that becomes fully α-helical upon binding to CaM. The existence of this pre-folded state suggests the occurrence of capping within CaM targets. In this review, we examine the capping properties within the residues flanking this core domain, and relate known IQ motifs and capping., The Government of the Autonomous Community of the Basque Country (IT1165-19 and KK-2020/00110) and the Spanish Ministry of Science and Innovation (RTI2018-097839-B-100 to A.V. and PID2019-105488GB-I00 to A.B., A.L., and O.R.B.) and FEDER funds provided financial support for this work. A.M-M. is supported by predoctoral contracts from the Basque Government administered by University of the Basque Country., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electronic temperature and two-electron processes in overbias plasmonic emission from tunnel junctions

  • Martín-Jiménez, Alberto
  • Lauwaet, Koen
  • Jover, Óscar
  • Granados, Daniel
  • Arnau, Andrés
  • Silkin, Viatcheslav M.
  • Miranda, Rodolfo
  • Otero, Roberto
The accurate determination of electronic temperatures in metallic nanostructures is essential for many technological applications, like plasmon-enhanced catalysis or lithographic nanofabrication procedures. In this Letter, we demonstrate that the electronic temperature can be accurately measured by the shape of the tunnel electroluminescence emission edge in tunnel plasmonic nanocavities, which follows a universal thermal distribution with the bias voltage as the chemical potential of the photon population. A significant deviation between electronic and lattice temperatures is found below 30 K for tunnel currents larger than 15 nA. This deviation is rationalized as the result of a two-electron process in which the second electron excites plasmon modes with an energy distribution that reflects the higher temperature following the first tunneling event. These results dispel a long-standing controversy on the nature of overbias emission in tunnel junctions and adds a new method for the determination of electronic temperatures and quasiparticle dynamics., R.M. and R.O. acknowledge financial support from the Spanish Ministry for Economy and Competitiveness (Grants PGC2018-098613-B-C21, PGC2018-096047-B-I00), the regional government of Comunidad de Madrid (Grant S2018/NMT-4321), Universidad Autónoma de Madrid (UAM/48) and IMDEA Nanoscience. Both IMDEA Nanoscience and IFIMAC acknowledge support from the Severo Ochoa and Maria de Maeztu Programmes for Centres and Units of Excellence in R&D (MINECO, Grants SEV-2016-0686 and CEX2018-000805-M). R.O. acknowledges support from the excellence programme Echegaray, funded by the regional government of Madrid. A.A. and V.M.S. acknowledge support from the Spanish Ministry of Science and Innovation (Grants Nos. PID2019-103910GB-I00 and PID2019-105488GB-I00, respectively) and from the Projects of the Basque Government for consolidated groups of the Basque University, through the Department of Universities (Grant Nos. IT-1246-19 and IT-1164-19, respectively)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From single-particle-like to interaction-mediated plasmonic resonances in graphene nanoantennas

  • Müller, Marvin M.
  • Kosik, Miriam
  • Pelc, Marta
  • Bryant, Garnett W.
  • Ayuela, Andrés
  • Rockstuhl, Carsten
  • Słowik, Karolina
Plasmonic nanostructures attract tremendous attention as they confine electromagnetic fields well below the diffraction limit while simultaneously sustaining extreme local field enhancements. To fully exploit these properties, the identification and classification of resonances in such nanostructures is crucial. Recently, a novel figure of merit for resonance classification has been proposed [Müller et al., J. Phys. Chem. C 124, 24331–24343 (2020)] and its applicability was demonstrated mostly to toy model systems. This novel measure, the energy-based plasmonicity index (EPI), characterizes the nature of resonances in molecular nanostructures. The EPI distinguishes between either a single-particle-like or a plasmonic nature of resonances based on the energy space coherence dynamics of the excitation. To advance the further development of this newly established measure, we present here its exemplary application to characterize the resonances of graphene nanoantennas. In particular, we focus on resonances in a doped nanoantenna. The structure is of interest, as a consideration of the electron dynamics in real space might suggest a plasmonic nature of selected resonances in the low doping limit but our analysis reveals the opposite. We find that in the undoped and moderately doped nanoantenna, the EPI classifies all emerging resonances as predominantly single-particle-like, and only after doping the structure heavily, the EPI observes plasmonic response., M.M.M. acknowledges financial support through the Research Travel Grant by the Karlsruhe House of Young Scientists (KHYS). M.M.M. and C.R. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (Project No. 378579271) within Project RO 3640/8-1 and from the VolkswagenStiftung. M.M.M. is grateful for the support of the Toruń Astrophysics/Physics Summer Program TAPS 2019 and the PROM (Project No. PPI/PRO/2018/1/00016/U/001) by the Polish National Agency for Academic Exchange. M.M.M., M.K., and K.S. acknowledge the hospitality of the Donostia International Physics Center. M.K. acknowledges financial support from the National Science Centre, Poland (Grant No. 2016/23/D/ST2/02064). M.P. and A.A. acknowledge financial support by Project No. PID2019-105488GB-I00 of the Spanish Ministry of Science and Innovation, and the Gobierno Vasco UPV/EHU (Project No. IT1246-19). K.S. acknowledges support from the National Science Centre, Poland (Project No. 2016/23/G/ST3/04045), the European Commission from the NRG-STORAGE project (GA 870114) and H2020-FET OPEN project MIRACLE (GA 964450)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interactions between reduced graphene oxide with monomers of (calcium) silicate hydrates: a first-principles study

  • Izadifar, Mohammadreza
  • Dolado, Jorge S.
  • Thissen, Peter
  • Ayuela, Andrés
Graphene is a two-dimensional material, with exceptional mechanical, electrical, and thermal properties. Graphene-based materials are, therefore, excellent candidates for use in nanocomposites. We investigated reduced graphene oxide (rGO), which is produced easily by oxidizing and exfoliating graphite in calcium silicate hydrate (CSHs) composites, for use in cementitious materials. The density functional theory was used to study the binding of moieties, on the rGO surface (e.g., hydroxyl-OH/rGO and epoxide/rGO groups), to CSH units, such as silicate tetrahedra, calcium ions, and OH groups. The simulations indicate complex interactions between OH/rGO and silicate tetrahedra, involving condensation reactions and selective repairing of the rGO lattice to reform pristine graphene. The condensation reactions even occurred in the presence of calcium ions and hydroxyl groups. In contrast, rGO/CSH interactions remained close to the initial structural models of the epoxy rGO surface. The simulations indicate that specific CSHs, containing rGO with different interfacial topologies, can be manufactured using coatings of either epoxide or hydroxyl groups. The results fill a knowledge gap, by establishing a connection between the chemical compositions of CSH units and rGO, and confirm that a wet chemical method can be used to produce pristine graphene by removing hydroxyl defects from rGO., This research was funded by Karlsruhe House of Young Science (KHYS), and Deutsche Forschungsgemeinschaft (DFG). A.A. and J.S.D. also acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2019-105488GB-I00 and PCI2019-103657 grant), the Gobierno Vasco UPV/EHU (project no. IT-1246-19), and the European Commission NRG-STORAGE project (project no. GA 870114). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metallic carbon nanotube quantum dots with broken symmetries as a platform for tunable terahertz detection

  • Buchs, G.
  • Marganska, Magdalena
  • González, J. W.
  • Eimre, K.
  • Pignedoli, C. A.
  • Passerone, D.
  • Ayuela, Andrés
  • Gröning, O.
  • Bercioux, Dario
arXiv:2006.10837v2, Generating and detecting radiation in the technologically relevant range of the so-called terahertz gap (0.1–10 THz) is challenging because of a lack of efficient sources and detectors. Quantum dots in carbon nanotubes have shown great potential to build sensitive terahertz detectors, usually based on photon-assisted tunneling. A recently reported mechanism combining resonant quantum dot transitions and tunneling barrier asymmetries results in a narrow linewidth photocurrent response with a large signal-to-noise ratio under weak THz radiation. That device was sensitive to one frequency, corresponding to transitions between equidistant quantized states. In this work we show, using numerical simulations together with scanning tunneling spectroscopy studies of a defect-induced metallic zigzag single-walled carbon nanotube quantum dot, that breaking simultaneously various symmetries in metallic nanotube quantum dots of arbitrary chirality strongly relaxes the selection rules in the electric dipole approximation and removes energy degeneracies. This leads to a richer set of allowed optical transitions spanning frequencies from 1 THz to several tens of THz, for a ∼10 nm quantum dot. Based on these findings, we propose a terahertz detector device based on a metallic single-walled carbon nanotube quantum dot defined by artificial defects. Depending on its length and contacts transparency, the operating regimes range from a high-resolution gate-tunable terahertz sensor to a broadband terahertz detector. Our calculations indicate that the device is largely unaffected by temperatures up to 100 K, making carbon nanotube quantum dots with broken symmetries a promising platform to design tunable terahertz detectors that could operate at liquid nitrogen temperatures., This work has been partially supported by the Spanish Ministry of Science and Innovation with PID2019-105488GB-I00 and PCI2019-103657 (A.A.) and FIS2017-82804-P (D.B.). The work of D.B. is partially supported by by the Transnational Common Laboratory QuantumChemPhys. The Basque Government supported this work through Project No. IT-1246-19 (A.A.). J.W.G. acknowledges financial support from FONDECYT: Iniciación en Investigación 2019 Grant N. 11190934 (Chile). A.A. acknowledge financial support by the European Commission from the NRG-STORAGE project (GA 870114). K.E., C.P. and D.P. acknowledge the Swiss National Science Foundation under Grant No. 200020_182015 and No. 200021_172527, and the NCCR MARVEL funded by the Swiss National Science Foundation (51NF40-182892). The Swiss National Supercomputing Centre (CSCS) under project ID s746 and s904 is acknowledged for computational resources., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Prediction of high-Tc superconductivity in ternary lanthanum borohydrides

  • Liang, Xiaowei
  • Bergara, Aitor
  • Wei, Xudong
  • Song, Xiaoxu
  • Wang, Linyan
  • Sun, Rongxin
  • Liu, Hanyu
  • Hemley, Russell J.
  • Wang, Lin
  • Gao, Guoying
  • Tian, Yongjun
The study of superconductivity in compressed hydrides is of great interest due to measurements of high critical temperatures (Tc) in the vicinity of room temperature, beginning with the observations of LaH10 at 170–190 GPa. However, the pressures required for synthesis of these high-Tc superconducting hydrides currently remain extremely high. Here we show the investigation of crystal structures and superconductivity in the La-B-H system under pressure with particle-swarm intelligence structure-searches methods in combination with first-principles calculations. Structures with seven stoichiometries, LaBH, LaBH4, LaBH6, LaBH7, LaBH8, La(BH)3, and La(BH4)3 were predicted to become stable under pressure. Remarkably, the hydrogen atoms in LaBH8 were found to bond with B atoms in a manner that is similar to that in H3S. Lattice dynamics calculations indicate that LaBH7 and LaBH8 become dynamically stable at pressures as low as 109 and 48 GPa, respectively. Moreover, the two phases were predicted to be superconducting with a critical temperature Tc of 93 K and 156 K at 110 GPa and 55 GPa, respectively (μ∗ = 0.1). The present results provide guidance for future experiments targeting hydride superconductors with both low synthesis pressures and high Tc., The work was supported by National Natural Science Foundation of China (No. 52022089, No. 11874076, No. 52090024, and No. 12074138), and the Ph.D. Foundation by Yanshan University (Grant No. B970). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (Grant No. FIS2019-105488GB-I00). R.J.H. acknowledges support from the U.S. National Science Foundation (Grant No. DMR-1933622)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pressure-induced superconductivity in Li-Te electrides

  • Zhang, Xiaohua
  • Li, Fei
  • Bergara, Aitor
  • Yang, Guochun
Electrides, which accommodate excess of electrons in lattice interstitials as anions, usually exhibit interesting properties and broad applications. Until now, most electrides, especially at high pressures, show semiconducting/insulating character arising from the strong localization of interstitial and orbital electrons. However, modulating their connectivity could turn them into metals and even superconductors. In this work, with the aid of first-principles particle swarm optimization, we have identified a series of pressure-induced Li-rich electrides in the Li-Te system, in which hollow Lin polyhedra accommodate the excess of electrons. With increasing Li content, these electrides undergo an interesting structural evolution. Meanwhile, the connection type of Lin polyhedra experiences transitions from vertex- or edge sharing, to face sharing, leading to a diverse distribution and connectivity of interstitial electrons. All identified electrides exhibit anionic electrons-dominated metallicity. More interestingly, Li9Te, with the highest content of Li6 octahedra, is superconducting with a critical temperature (Tc) of 10.2 K at 75 GPa, which is much higher than typical electrides (e.g., 12CaO⋅7Al2O3, Ca2N, and Y2C). Its superconductivity mainly originates from the coupling between hybridized electrons (anionic and atomic non-s-state ones) and Te-dominated phonons., The authors acknowledge the funding support from the Natural Science Foundation of China under Grants No. 21873017 and No. 21573037, the Postdoctoral Science Foundation of China under Grant No. 2013M541283, the Natural Science Foundation of Jilin Province (Grant No. 20190201231JC), and the Natural Science Foundation of Hebei Province (Grant No. B2021203030). The work was carried out at National Supercomputer Center in Tianjin, and the calculations were performed on TianHe-1 (A). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (Grant No. PID2019-105488GB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wide band gap P3S monolayer with anisotropic and ultrahigh carrier mobility

  • Wang, Bo
  • Tang, Meng
  • Lou, Huan
  • Li, Fei
  • Bergara, Aitor
  • Yang, Guochun
Phosphorene has offered an additional advantage for developing new optoelectronic devices due to its anisotropic and high carrier mobility. However, its instability in air causes a rapid degradation of the performance of the device. Thus, improving the stability of phosphorene while maintaining its original properties has become the key to the development of high-performance electronic devices. Herein, we propose that the formation of two-dimensional (2D) P-rich P–S compounds could achieve this goal. First-principles swarm-structural searches revealed two previously unkonwn P3S and P2S monolayers. The P3S monolayer, consisting of n-bicyclo-P6 units along the armchair direction, exhibits anisotropic and wide band gap characteristics. Interestingly, its carrier mobility reaches 1.11 × 104 cm2 V–1 s–1 and is much higher than in phosphorene. Its electronic band gap and optical absorption coefficients in the ultraviolet region reach 2.71 eV and 105 cm–1, respectively. Additionally, the P3S monolayer has a high structural stability and resistance to air oxidation., The authors acknowledge funding support from the Natural Science Foundation of China under Nos. 21873017 and 21573037, the Postdoctoral Science Foundation of China under grant 2013M541283, the Natural Science Foundation of Hebei Province (B2021203030), and the Natural Science Foundation of Jilin Province (20190201231JC). The work was carried out at the National Supercomputer Center in Tianjin, and the calculations were performed on TianHe-1 (A). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (PID2019-105488GB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase transitions of alkaline-earth metal sulfides under pressure

  • Wang, Yuefeng
  • Bergara, Aitor
  • Shao, Cancan
  • Wang, Lin
  • Liang, Xiaowei
  • Wang, Linyan
  • Sun, Rongxin
  • Wei, Xudong
  • Wang, Tiansheng
  • Gao, Guoying
  • Tian, Yongjun
We have systematically explored the crystal structures of alkaline-earth metal sulfides under pressure by using a swarm-intelligence structural prediction method. At low pressures we successfully reproduced their known structures and phase transition sequences. Under high pressure, MgS is predicted to transform from B28 to a β-NbP-type structure at 262 GPa. CaS and SrS present the same phase transition sequence, from B2 to a β-NbP-type structure, while BaS is predicted to transform to a Imma structure. The Imma structure is actually similar to the β-NbP-type structure, as it can be seen as a modulated distortion of the latter structure. The absence of any imaginary phonon mode for the predicted structures suggests that they are dynamically stable. The calculated electronic band structures and density of states reveal that all the predicted phases are metallic, except that MgS is a semiconductor. Subsequent electron-phonon coupling calculations suggest that Imma BaS is a superconductor with a low Tc of 1.32 K, while β-NbP MgS, CaS and SrS are not superconductors. The current study provides a comprehensive analysis of phase transitions for alkaline-earth metal sulfides up to 300 GPa and might stimulate experimental studies in the future., The work was supported by National Natural Science Foundation of China (91963115, 52022089), the PhD Foundation by Yanshan University (B970), Science and Technology Project of Hebei Education Department (Grant No. QN2021136). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (PID2019-105488GB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Rolling up two-dimensional layers of silicon sulfide: Dimerization effects and negative strain energy in silicon monosulfide nanotubes

  • Alonso-Lanza, Tomás
  • Aguilera-Granja, Faustino
  • Ayuela, Andrés
Resumen del trabajo presentado al APS March Meeting, celebrado de forma virtual del 13 al 19 de marzo de 2021., We investigatenanotubes of two-dimensional materials isoelectronic to phosphorene by rolling up the recently discovered layers of silicon monosulfide, in phasesthat in order of decreasing stability are labeled as P mma and β [1-3]. We find that the nanotubes of thick layer P mma silicon monosulfide grownaround 1 nm in diameter are stable at room temperature. The nanotubes having small diameters show metallic character, and with increasingdiameter, they become semiconductors because gaps are open by the dimerization of the silicon-silicon distances. Lying at higher energy, we alsofind that the β SiS monolayer nanotubes are stable with negative strain energy, similar to imogolite nanotubes. The theoretical thermal stability ofthese two types of silicon monosulfide nanotubes showing such intriguing properties would request further to investigate procedures for theirnovel synthesis by experimentalists., Project PID2019-105488GB-I00 of the Spanish MICINN, and Project No. IT1246-19 of the Gobierno Vasco-UPV/EHU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How aromatic are molecular nanorings? The case of a six-porphyrin nanoring

  • Casademont-Reig, Irene
  • Guerrero-Avilés, Raúl
  • Ramos-Cordoba, Eloy
  • Torrent-Sucarrat, Miquel
  • Matito, Eduard
Large conjugated rings with persistent currents are novel promising structures in molecular-scale electronics. A six-porphyrin nanoring structure that allegedly sustained an aromatic ring current involving 78π electrons was recently synthesized. We provide here compelling evidence that this molecule is not aromatic, contrary to what was inferred from the analysis of 1H-NMR data and computational calculations that suffer from large delocalization errors. The main reason behind the absence of an aromatic ring current in these nanorings is the low delocalization in the transition from the porphyrins to the bridging butadiyne linkers, which disrupts the overall conjugated circuit. These results highlight the importance of choosing a suitable computational method to study large conjugated molecules and the appropriate aromaticity descriptors to identify the part of the molecule responsible for the loss of aromaticity., This work has been supported by grants from the Spanish government MICINN (PGC2018-098212-B-C21, PID2019-104772GB-I00, EUR2019-103825, PID2019-105488GB-I00, and PCI2019-103657), Diputación Foral de Gipuzkoa (2019-CIEN-000092-01), and Gobierno Vasco (IT1346-19, IT1254-19, PRE_2016_1_0159, and PIBA19-0004). E.R.C. acknowledges funding from the Juan de la Cierva program IJCI-2017-34658., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modification of the optical properties of molecular chains upon coupling to adatoms

  • Müller, Marvin M.
  • Kosik, Miriam
  • Pelc, Marta
  • Bryant, Garnett W.
  • Ayuela, Andrés
  • Rockstuhl, Carsten
  • Słowik, Karolina
Adsorbed atoms (adatoms) coupled to the matrix of solid state host materials as impurities can significantly modify their properties. Especially in low-dimensional materials, such as one-dimensional organic polymer chains or quasi-one-dimensional graphene nanoribbons, intriguing manipulation of the optical properties, such as the absorption cross section, is possible. The most widely used approach to couple quantum emitters to optical antennas is based on the Purcell effect. This formalism, however, does not comprise charge transfer from the emitter to the antenna, but only spontaneous emission of the quantum emitter into the tailored photonic environment, that is evoked by the antenna. To capture such effects, we present a tight-binding formalism to couple an adatom to a finite Su-Schrieffer-Heeger chain, where the former is treated as a two-level system and the latter acts as an optical antenna. We systematically analyze how the coupling strength and the position of the adatom influence the optical properties of the molecular chains in the model. We take into account charge transfer from the adatom to the chain and vice versa via an intersystem hopping parameter, and also include Coulomb interaction within the chain as well as between the adatom and the chain. We show that coupling the adatom to one of the bulk atoms of the linear chain results in a substantial change in optical properties already for comparatively small coupling strengths. We also find that the position of the adatom crucially determines if and how the optical properties of the chains are altered. Therefore, we identify this adatom-chain hybrid system as a tunable platform for light-matter interaction at the nanoscale., M.M.M. acknowledges financial support through the Research Travel Grant by the Karlsruhe House of Young Scientists (KHYS). M.M.M. and C.R. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (Project No. 378579271) within Project RO 3640/8-1 and from the VolkswagenStiftung. M.K. and K.S. acknowledge the support from the National Science Centre, Poland (Project No. 2016/23/G/ST3/04045). A.A. acknowledges support from the Spanish Ministry of Science and Innovation with Grants No. PID2019-105488GB-I00 and No. PCI2019-103657, the Basque Government through the University of the Basque Country Project No. IT-1246-19, and the European Commission from the NRG-STORAGE Project (No. GA 870114) and H2020-FET OPEN Project MIRACLE (No. GA 964450)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superconducting LaP2H2 with graphenelike phosphorus layers

  • Li, Xing
  • Zhang, Xiaohua
  • Bergara, Aitor
  • Gao, Guoying
  • Liu, Yong
  • Yang, Guochun
Novel structural building blocks in compounds could induce interesting physical and chemical properties. Although phosphorus tends to form very different motifs, the existence of lone pair electrons has always prevented the formation of graphenelike structures. Here, the application of first-principles swarm structural calculations has allowed us to predict the stability of pressure-induced hexagonal LaP2H2 containing graphenelike phosphorus, which derives from the trigonal bipyramid configuration of P atoms regulated by symmetric hydrogen bonds. LaP2 in LaP2H2 has the same configuration as MgB2, and P and H atoms form a three-dimensional framework as H3S. Interestingly, LaP2H2 shows a superconductivity dominated by the graphenelike phosphorus layer and its coupling with La atoms. On the other hand, LaP2H2 is not only superconducting at a lower pressure than the H-rich LaPH6, but it also shows a superconducting transition temperature three times higher. Our work provides an example which extends the landscape of conventional superconductors at lower pressures., The authors acknowledge funding from the Natural Science Foundation of China under Grants No. 21873017, No. 52022089, and No. 21573037, Natural Science Foundation of Hebei Province Grants No. A2019203507 and No. B2021203030, the Postdoctoral Science Foundation of China under Grant No. 2013M541283, and the Natural Science Foundation of Jilin Province (Grant No. 20190201231JC). This work was carried out at National Supercomputer Center in Tianjin, and the calculations were performed on TianHe-1 (A). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (Grant No. PID2019- 105488GB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced superconductivity in CuH2 monolayers

  • Yan, Xu
  • Ding, Shicong
  • Zhang, Xiaohua
  • Bergara, Aitor
  • Liu, Yong
  • Wang, Yanchao
  • Zhou, Xiang-Feng
  • Yang, Guochun
Achieving superconductivity in hydrides at lower pressures is a long-standing scientific challenge. Here, we propose that reducing their effective dimensionality might be a possible route to achieve this goal. First-principles structural search calculations identify several two-dimensional transition metal hydrides (TMHs) with phonon-mediated superconductivity. Among them, the two CuH2 phases with P−3m1 and P−6m2 symmetries are predicted to have the highest Tc values up to 44.4 and 47.8 K, comparable to the well-known MgB2 superconductor. Their superconductivity mainly originates from the coupling of Cu3dxz/dyz and H−1s electrons with in-plane H-vibrational phonons. Interestingly, both CuH2 structures show a unique superconducting energy gap by solving the anisotropic Eliashberg equations. Furthermore, the superconductivity of TMHs is closely related to the polarity of the TM-H bond. Our paper paves the way for finding hydride superconductors in low-dimensional materials., We acknowledge the funding support from the Natural Science Foundation of China under Grants No. 52025026, No. 21873017, and No. 21573037, the Postdoctoral Science Foundation of China under Grant No. 2013M541283, the Innovation Capability Improvement Project of Hebei province (Grant No. 22567605H), the Natural Science Foundation of Jilin Province (Grant No. 20190201231JC), and the Natural Science Foundation of Hebei Province (Grant No. B2021203030). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (Grant No. PID2019-105488GB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Out-of-plane magnetic anisotropy in bulk ilmenite CoTiO3

  • Arruabarrena, Mikel
  • Leonardo, Aritz
  • Rodriguez-Vega, Martin
  • Fiete, Gregory A.
  • Ayuela, Andrés
Structural, electronic, and magnetic properties of bulk ilmenite CoTiO3 are analyzed in the framework of density functional theory, using the generalized gradient approximation and Hubbard-corrected approaches. We find that the G-type antiferromagnetic structure, which consists of antiferromagnetically coupled ferromagnetic ab planes, is the ground state of the system, in agreement with experiments. Furthermore, cobalt titanates present two critical temperatures related to the breaking of the inter- and intralayer magnetic ordering. This would result in the individual planes remaining ferromagnetic even at temperatures above the Néel temperature. When spin-orbit coupling is included in our calculations, we find an out-of-plane magnetic anisotropy, which can be converted to an in-plane anisotropy with a small doping of electrons corresponding to about 2.5% Ti substitution for Co, consistent with experimental expectations. We thus present a disorder-dependent study of the magnetic anisotropy in bulk CoTiO3, which will determine its magnon properties, including topological aspects., We gratefully acknowledge primary funding from the National Science Foundation through the Center for Dynamics and Control of Materials: an NSF MRSEC under Cooperative Agreement No. DMR-1720595, with additional support from NSF Grant No. DMR-1949701 and NSF Grant No. DMR2114825. This work was performed in part at the Aspen Center for Physics, which is supported by National Science Foundation Grant No. PHY-1607611. M.R.-V. was supported by LANL LDRD Program and by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division, Condensed Matter Theory Program. This work has been supported by the Spanish Ministry of Science and Innovation with Grants No. PID2019105488GB-I00 and No. PCI2019-103657. We acknowledge financial support by the European Commission from the NRG-STORAGE project (No.GA870114). The Basque Government supported this work through Project No. IT-1246-19. M.A. was supported by the Spanish Ministry of Science and Innovation through the FPI Ph.D. Fellowship No. BES-2017079677., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superconducting Li10Se electride under pressure

  • Zhang, Xiaohua
  • Zhao, Yaping
  • Bergara, Aitor
  • Yang, Guochun
Achieving a compound with interesting multiple coexisting states, such as electride, metallicity, and superconductivity, is of great interest in basic research and practical application. Pressure has become an effective way to realize high-temperature superconductivity in hydrides, whereas most electrides are semiconducting or insulating at high pressure. Here, we have applied swarm-intelligence structural search to identify a hitherto unknown C2/m Li10Se electride that is superconducting at high pressure. More interestingly, Li10Se is estimated to exhibit the highest Tc value of 16 K at 50 GPa, which is the lowest pressure among Li-based chalcogen electrides. This superconducting transition is dominated by Se-related low frequency vibration modes. The increasing electronic occupation of the Se 4d orbital and the decreasing amount of interstitial anion electrons with pressure heighten their coupling with low-frequency phonons, which is responsible for the enhancement of the Tc value. The finding of Li-based chalcogen superconducting electrides provides a reference for the realization of other superconducting electrides at lower pressures., The authors acknowledge financial support from the Natural Science Foundation of China under Grant Nos. 21873017 and 21573037, the Postdoctoral Science Foundation of China under Grant No. 2013M541283, the Natural Science Foundation of Jilin Province (Grant No. 20190201231JC), and the Natural Science Foundation of Hebei Province (Grant No. B2021203030). This work was carried out at the National Supercomputer Center in Tianjin, and the calculations were performed on TianHe-1 (A). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (Grant No. PID2019-105488GB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intrinsic ferromagnetism in 2D Fe2H with a high Curie temperature

  • Ding, Shicong
  • Yan, Xu
  • Bergara, Aitor
  • Zhang, Xiaohua
  • Liu, Yong
  • Yang, Guochun
The rational design of ferromagnetic materials is crucial for the development of spintronic devices. Using first-principles structural search calculations, we have identified 73 two-dimensional transition metal hydrides. Some of them show interesting magnetic properties, even when combined with the characteristics of the electrides. In particular, the P3̅m1 Fe2H monolayer is stabilized in a 1T-MoS2-type structure with a local magnetic moment of 3 μB per Fe atom, whose robust ferromagnetism is attributed to the exchange interaction between neighboring Fe atoms within and between sublayers, leading to a remarkably high Curie temperature of 340 K. On the other hand, it has a large magnetic anisotropic energy and spin-polarization ratio. Interestingly, the above room-temperature ferromagnetism of the Fe2H monolayer is well preserved within a biaxial strain of 5%. The structure and electron property of surface-functionalized Fe2H are also explored. All of these interesting properties make the Fe2H monolayer an attractive candidate for spintronic nanodevices., The authors acknowledge the funding supports from the Natural Science Foundation of China under nos 21873017 and 21573037, Innovation Capability Improvement Project of Hebei province (no. 22567605H), the Postdoctoral Science Foundation of China under grant 2013M541283, the Natural Science Foundation of Jilin Province (20190201231JC), and the Natural Science Foundation of Hebei Province (B2021203030). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (PID2019-105488GB-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Localization versus delocalization of d-states within the Ni 2 MnGa Heusler alloy

  • Janovec, Jozef
  • Zelený, Martin
  • Heczko, Oleg
  • Ayuela, Andrés
We present calculations based on density-functional theory with improved exchange-correlation approaches to investigate the electronic structure of Ni2 MnGa magnetic shape memory alloy prototype. We study the effects of hybrid functionals as well as a Hubbard-like correction parameter U on the structural, electronic and magnetic properties of the alloy. We show that the previously successful application of U on Mn should be extended by including U on Ni to describe the d localized electrons more accurately and in better agreement with experiments. The bonding interactions within this intermetallic alloy are analysed including the role of non-transition metal. We found that the strongest and most stabilizing bond is formed between the Ga–Ni pairs due to the delocalized s–s and p–s orbital hybridization. Our findings suggest that minimization of the over-delocalization error introduced by standard semi-local exchange-correlation functionals leads to a better description of the Ni2 MnGa alloy. Furthermore we propose that the experimental total magnetic moment of Ni–Mn–Ga alloys could be increased after carefully selected heat treatment procedures., This work was supported by the Czech Science Foundation, Grant No. 21-06613S, and by the Operational Program Research, Development and Education financed by the European Structural and Investment Funds and the Czech Ministry of Education, Youth and Sports (MEYS CR) (project MATFUN CZ.02.1.01/0.0/0.0/15_003/0000487). J.J. and A.A. acknowledges the Spanish Ministry of Science and Innovation with PID2019-105488GB-I00, TED2021-132074B-C32, and PCI2019-103657, the Basque Government through the University of the Basque Country Project No. IT-1569-22, the European Commission from the NRG-STORAGE Project (No. GA 870114), H2020-FET OPEN Project MIRACLE (No. GA 964450), EUSKAMPUS foundation and the “Green Concrete” Transborder Lab., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revising quantum optical phenomena in adatoms coupled to graphene nanoantennas

  • Kosik, Miriam
  • Müller, Marvin M.
  • Słowik, Karolina
  • Bryant, Garnett W.
  • Ayuela, Andrés
  • Rockstuhl, Carsten
  • Pelc, Marta
Graphene flakes acting as photonic nanoantennas may sustain strong electromagnetic field localization and enhancement. To exploit the field enhancement, quantum emitters such as atoms or molecules should be positioned in such close proximity to the flake that electron tunneling might influence the optical and electronic properties of the system. However, tunneling is usually not considered if the optical coupling mechanism between quantum emitters and nanoantennas is at focus. This work presents a framework for describing the electron dynamics in hybrid systems consisting of graphene nanoflakes coupled both electronically and optically to adatoms and subject to external illumination. Our framework combines the single-particle tight-binding approach with a nonlinear master equation formalism that captures both optical and electronic interactions. We apply the framework to demonstrate the impact of electron tunneling between the adatom and the flake on emblematic quantum optical phenomena: degradation of coherent Rabi oscillations and quenching of Purcell spontaneous emission enhancement in two-level adatoms in proximity of triangular graphene nanoflakes., M.K. acknowledges support from the National Science Centre, Poland (Project No. 2016/23/G/ST3/04045). M.P. and K.S. acknowledge support from the National Science Centre, Poland (Project No. 2020/39/I/ST3/00526). M.M.M. acknowledges financial support through the Research Travel Grant by the Karlsruhe House of Young Scientists (KHYS). M.M.M. and C.R. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (Project No. 378579271) within Project RO 3640/8-1 and from the VolkswagenStiftung. A.A. acknowledges the Spanish Ministry of Science and Innovation with PID2019-105488GB-I00 and PCI2019-103657, the Basque Government through the University of the Basque Country Project No. IT-1246-19, the European Commission from the NRG-STORAGE Project (No. GA 870114) and H2020-FET OPEN Project MIRACLE (No. GA 964450). A.A. carried this study under the Translacional CommonLaboratory (LTC-Green Concrete)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural and electronic properties of Na-B-H compounds at high pressure

  • Li, Xing
  • Zhang, Xiaohua
  • Bergara, Aitor
  • Liu, Yong
  • Yang, Guochun
Ternary hydrides are ideal candidates for high-temperature superconductivity. However, their electronic properties correlate strongly with the charge transfer between their consistent elements. In this work we propose nine Na-B-H compounds, which combines charge modulation between Na and B/H atoms with pressure, with unusual structural motifs and interesting electronic properties. In the metallic Pmma NaBH3, with both ionic and covalent frameworks, formed by H atoms bonded to Na/B atoms, a low-frequency phonon dominated superconductivity is predicted with a Tc of 86.8 K, distinct from the high-frequency H-derived superconductivity associated with covalent H-based skeletons or H cages/sheets in superhydrides. Furthermore, in nonmetallic NaBHn (n=1,2, and 6) and R−3m NaBH3, the B atom exhibits an sp3-hybridized feature analogous to the C atom, resulting in the formation of several alkanelike B-H motifs, such as a graphanelike layer and an ethane-shaped molecule. Our work presents an important step toward the understanding of metal borohydrides., The authors acknowledge funding from the Natural Science Foundation of China (Grants No. 21873017 and No. 21573037), the Innovation Capability Improvement Project of Hebei province (Grant No. 22567605H), the Natural Science Foundation of Hebei Province (Grant No. B2021203030), the Postdoctoral Science Foundation of China (Grant No. 2013M541283), and the Natural Science Foundation of Jilin Province (Grant No. 20190201231JC). This work was carried out at National Supercomputer Center in Tianjin, and the calculations were performed on TianHe-1 (A). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (Grant No. PID2019-105488GB-I00) and the Department of Education, Universities and Research of the Basque Government and the University of the Basque Country (Grant No. IT1707-22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dramatic plasmon response to the charge-density-wave gap development in 1T-TiSe2

  • Lin, Zijian
  • Wang, Cuixiang
  • Balassis, A.
  • Echeverry, J. P.
  • Vasenko, Andrey S.
  • Silkin, Viatcheslav M.
  • Chulkov, Eugene V.
  • Shi, Youguo
  • Zhang, Jiandi
  • Guo, Jiandong
  • Zhu, Xuetao
1T−TiSe2 is one of the most studied charge density wave (CDW) systems, not only because of its peculiar properties related to the CDW transition, but also due to its status as a promising candidate of exciton insulator signaled by the proposed plasmon softening at the CDW wave vector. Using high-resolution electron energy loss spectroscopy, we report a systematic study of the temperature-dependent plasmon behaviors of 1T−TiSe2. We unambiguously resolve the plasmon from phonon modes, revealing the existence of Landau damping to the plasmon at finite momentums, which does not support the plasmon softening picture for exciton condensation. Moreover, we discover that the plasmon lifetime at zero momentum responds dramatically to the band gap evolution associated with the CDW transition. The interband transitions near the Fermi energy in the normal phase are demonstrated to serve as a strong damping channel of plasmons, while such a channel in the CDW phase is suppressed due to the CDW gap opening, which results in the dramatic tunability of the plasmon in semimetals or small-gap semiconductors., This work was supported by the National Key R&D Program of China (No.2021YFA1400200 and No.2017YFA0303600), the National Natural Science Foundation of China (No.11874404andNo.11974399), and the Strategic Priority Research Program of Chinese Academy of Sciences (No.XDB33000000). V.M.S. acknowledges financial support by Grant No .PID2019105488GB-I00 funded by MCIN/AEI/10.13039/501100011033/. X.Z. was partially supported by the Youth Innovation Promotion Association of Chinese Academy of Sciences., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rhombohedral trilayer graphene is more stable than its Bernal counterpart

  • Guerrero-Avilés, Raúl
  • Pelc, Marta
  • Geisenhof, Fabian R.
  • Weitz, R. Thomas
  • Ayuela, Andrés
Stackings in graphene have a pivotal role in properties that could be useful in the future, as seen in the recently found superconductivity of twisted bilayer graphene. Beyond bilayer graphene, the stacking order of multilayer graphene can be rhombohedral, which shows flat bands near the Fermi level that are associated with interesting phenomena, such as tunable conducting surface states that can be expected to exhibit spontaneous quantum Hall effect, surface superconductivity, and even topological order. However, the difficulty in exploring rhombohedral graphenes is that in experiments, the alternating, hexagonal stacking is the most commonly found geometry and has been considered to be the most stable configuration for many years. Here we reexamine this stability issue in line with current ongoing studies in various laboratories. We conducted a detailed investigation of the relative stability of trilayer graphene stackings and showed how delicate this aspect is. These few-layer graphenes appear to have two basic stackings with similar energies. The rhombohedral and Bernal stackings are selected using not only compressions but anisotropic in-plane distortions. Furthermore, switching between stable stackings is more clearly induced by deformations such as shear and breaking of the symmetries between graphene sublattices, which can be accessed during selective synthesis approaches. We seek a guide on how to better control – by preserving and changing – the stackings in multilayer graphene samples., This research was funded by the Spanish Ministry of Science and Innovation (grants no. PID2019-105488GB-I00), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), and the European Commission NRG-STORAGE project (project no. GA 870114) and H2020-FET OPEN Project MIRACLE (No. GA 964450). This research was conducted in the scope of the Transnational Common Laboratory (LTC) “Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Prediction of monolayer FeP4 with intrinsic half-metal ferrimagnetism above room temperature

  • Han, Fanjunjie
  • Yan, Xu
  • Li, Fei
  • Yu, Hong
  • Li, Wenjing
  • Zhong, Xin
  • Bergara, Aitor
  • Yang, Guochun
The design of high-temperature ferrimagnetic materials is highly demanded for next-generation functional spintronic devices. Here, we propose that the combination of nonmetallic structural units and magnetic atoms is an effective way to achieve high-temperature magnetism in two-dimensional (2D) materials. The predicted FeP4 monolayer, consisting of quasisquare P4 units, shows intrinsic half-metal ferrimagnetism above room temperature. Each Fe atom is coordinated with four P atoms associated with the surrounding four quasisquare P4 units. First-principles calculations suggest that the FeP4 monolayer presents a Curie temperature of 460 K. More interestingly, the itinerant electrons and the unique quasisquare P4 units act as intermediaries and play an important role in promoting the Ruderman-Kittel-Kasuya-Yosida and superexchange interactions, respectively, which induces a robust ferrimagnetism. Our findings not only shed light on the promising future of 2D magnetic materials, but also are of interest for high-temperature spintronic applications., The authors acknowledge the funding support from the Natural Science Foundation of China under Grants No. 21873017 and No. 21573037, the Postdoctoral Science Foundation of China under Grant No. 2013M541283, the Natural Science Foundation of Jilin Province (Grant No. 20190201231JC), and the Natural Science Foundation of Hebei Province (Grant No. B2021203030), the Science and Technology Project of Hebei Education Department (Grant No. JZX2023020). The work was carried out at National Supercomputer Center in Tianjin, and the calculations were performed on TianHe-1 (A). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (Grant No. PID2019-105488GB-I00) and the Department of Education, Universities and Research of the Basque Government and the University of the Basque Country (Grant No. IT1707-22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sudden excitations of harmonic normal modes

  • Aldazabal, Íñigo
  • Nagy, Istvan
The N-harmonium boson system, i.e., a completely integrable model of N particles where both the external confinement and the two-particle interaction are harmonic, is investigated under the action of sudden time-dependent perturbation. This quench-like external perturbation of confinement has a quadrupolar space-character. The time-independent transition probabilities, which characterize the impact of quench as average occupation numbers, form a complete distribution in the sense of probability theory. The quench-generated energy shift ΔE in the correlated many-body system, and a purity-type Rényi entropy Sα=2 are calculated. Challenging reinterpretations of such an energy change in terms of variables of a classical thermodynamical system of N(N−1)/2 pairs are given as well. As in the case of the ground-state correlated system, an entropy could characterize a global link to energetically optimized independent-particle models., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature., This work was supported in part by Grant PID2019-105488GB-I00 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular dynamics simulations of the calmodulin-induced α-helix in the SK2 calcium-gated potassium ion channel

  • Ramis, Rafael
  • Ballesteros, Oscar R.
  • Muguruza-Montero, Arantza
  • Alicante Martínez, Sara
  • Núñez, Eider
  • Villarroel, Álvaro
  • Leonardo, Aritz
  • Bergara, Aitor
The family of small-conductance Ca2+-activated potassium ion channels (SK channels) is composed of four members (SK1, SK2, SK3, and SK4) involved in neuron-firing regulation. The gating of these channels depends on the intracellular Ca2+ concentration, and their sensitivity to this ion is provided by calmodulin (CaM). This protein binds to a specific region in SK channels known as the calmodulin-binding domain (CaMBD), an event which is essential for their gating. While CaMBDs are typically disordered in the absence of CaM, the SK2 channel subtype displays a small prefolded α-helical region in its CaMBD even if CaM is not present. This small helix is known to turn into a full α-helix upon CaM binding, although the molecular-level details for this conversion are not fully understood yet. In this work, we offer new insights on this physiologically relevant process by means of enhanced sampling, atomistic Hamiltonian replica exchange molecular dynamics simulations, providing a more detailed understanding of CaM binding to this target. Our results show that CaM is necessary for inducing a full α-helix along the SK2 CaMBD through hydrophobic interactions with V426 and L427. However, it is also necessary that W431 does not compete for these interactions; the role of the small prefolded α-helix in the SK2 CaMBD would be to stabilize W431 so that this is the case. In conclusion, our findings provide further insight into a key interaction between CaM and SK channels that is important for channel sensitivity to Ca2+., We acknowledge financial support from the Department of Education, Universities, and Research of the Basque Government and the University of the Basque Country (IT1165-19, KK-2020/00110, and IT1707-22), from the Spanish Ministry of Science and Innovation (projects PID2021-128286NB-100, PID2019-105488GB-I00, TED2021-132074B-C32, and RTI2018-097839-B-100) and from FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probing the role of grain boundaries in single Cu nanoparticle oxidation by in situ plasmonic scattering

  • Nilsson, Sara
  • Posada-Borbón, Alvaro
  • Zapata-Herrera, Mario
  • Bastos da Silva Fanta, Alice
  • Albinsson, David
  • Fritzsche, Stephan
  • Silkin, Viatcheslav M.
  • Aizpurua, Javier
  • Grönbeck, Henrik
  • Esteban, Ruben
  • Langhammer, Christoph
Grain boundaries determine physical properties of bulk materials including ductility, diffusivity, and electrical conductivity. However, the role of grain boundaries in nanostructures and nanoparticles is much less understood, despite the wide application of nanoparticles in nanophotonics, nanoelectronics, and heterogeneous catalysis. Here, we investigate the role of high-angle grain boundaries in the oxidation of Cu nanoparticles, using a combination of in situ single particle plasmonic nanoimaging and postmortem transmission electron microscopy image analysis, together with ab initio and classical electromagnetic calculations. We find an initial growth of a 5-nm-thick Cu2O shell on all nanoparticles, irrespective of different grain morphologies. This insensitivity of the Cu2O shell on the grain morphology is rationalized by extraction of Cu atoms from the metal lattice being the rate limiting step, as proposed by density functional theory calculations. Furthermore, we find that the change in optical scattering intensity measured from the individual particles can be deconvoluted into one contribution from the oxide layer growth and one contribution that is directly proportional to the grain boundary density. The latter contribution signals accumulation of Cu vacancies at the grain boundaries, which, as corroborated by calculations of the optical scattering, leads to increased absorption losses and thus a decrease of the scattering, thereby manifesting the role of grain boundaries as vacancy sinks and nuclei for Kirkendall void formation at a later stage of the oxidation process., This research has received funding from the Knut and Alice Wallenberg Foundation, Project No. 2015.0055.M.Z.H., J.A., and R.E.L. acknowledge financial support by Grant No. PID2019-107432GB-I00 funded by MCIN/AEI/10.13039/501100011033/. V.M.S. acknowledges financial support by Grant No. PID2019105488GBI00 funded by MCIN/AEI/10.13039/501100011033/., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Theoretical study of topological properties of ferromagnetic pyrite CoS2

  • Robredo, Iñigo
  • Schröter, Niels B. M.
  • Reyes-Serrato, Armando
  • Bergara, Aitor
  • Juan, Fernando de
  • Schoop, Leslie M.
  • Vergniory, Maia G.
Since the discovery of the first topological material 15 years ago, the search for material realizations of novel topological phases has become the driving force of the field. While oftentimes we search for new materials, we forget that well established materials can also display very interesting topological properties. In this work, we revisit CoS${}_2$, a metallic ferromagnetic pyrite that has been extensively studied in the literature due to its magnetic properties. We study the topological features of its electronic band structure and identify Weyl nodes and nodal lines, as well as a symmetry-protected fourfold fermion close to the Fermi level. Looking at different surface cleavage planes, we observe both spin polarized Fermi arcs in the majority channel and drumhead states. These findings suggest that CoS2 is a promising platform to study topological phenomena, as well as a good candidate for spintronic applications., M G V and I R acknowledge the Spanish Ministerio de Ciencia e Innovacion (Grant Number PID2019109905GB-C21), Programa Red Guipuzcoana de Ciencia, Tecnología e Innovación 2021 No. 2021-CIEN-000070-01 Gipuzkoa Next and the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) GA 3314/1-1—FOR 5249 (QUAST). A R S is grateful to PASPA-DGAPA-UNAM for the sabbatical scholarship and to the DIPC for their support during the research stay. A B acknowledges financial support from the Spanish Ministry of Science and Innovation (PID2019-105488GBI00). N B M S was supported by Microsoft. This work was supported by the Gordon and Betty Moore Foundation through Grant GBMF9064 to L M S., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dimerization effects and negative strain energy in silicon monosulfide nanotubes

  • Alonso-Lanza, Tomás
  • Aguilera-Granja, Faustino
  • Ayuela, Andrés
This article belongs to the Special Issue Modeling, Simulation and Optimization of Nanomaterials., We report on the construction and characterization of silicon monosulfide nanotubes that were obtained by rolling up two-dimensional materials isoelectronic to phosphorene in the recently discovered layered Pmma and 𝛽 phases. We relaxed and studied the nanotube structures using computational methods within density functional theory (DFT). We found that the nanotubes with a thick Pmma layer remain stable at room temperature, and their electronic properties depend on their diameters. Small-diameter nanotubes display metallic character, while nanotubes with increasing diameter show semiconducting ground states due to the dimerization in the silicon–silicon distances that opens a gap, leading to interesting optical properties in the near-infrared region. Furthermore, we discovered 𝛽 SiS monolayer nanotubes having negative strain energies, similar to the well-known imogolite inorganic nanotubes. The combined thermal stability, compelling optical properties, and diverse applications of these silicon monosulfide nanotubes underscore the demand for novel synthesis methods to fully explore their potential in various fields., This research was funded by the Spanish Ministry of Science and Innovation (grants no. PID2019-105488GB-I00, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the European Commission NRG-STORAGE project (project no. GA 870114), H2020-FET OPEN Project MIRACLE (No. GA 964450), and NaturSea-PV (ID 101084348). This research was conducted in the scope of the Transnational Common Laboratory (LTC) “Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Acoustic plasmons in nickel and its modification upon hydrogen uptake

  • Koroteev, Yuri M.
  • Silkin, Igor V.
  • Chernov, I. P.
  • Chulkov, Eugene V.
  • Silkin, Viatcheslav M.
This article belongs to the Special Issue Photoemission and Excitation Properties of Nanomaterials by Computational Methods., In this work, we study, in the framework of the ab initio linear-response time-dependent density functional theory, the low-energy collective electronic excitations with characteristic sound-like dispersion, called acoustic plasmons, in bulk ferromagnetic nickel. Since the respective spatial oscillations in slow and fast charge systems involve states with different spins, excitation of such plasmons in nickel should result in the spatial variations in the spin structure as well. We extend our study to NiH𝑥 with different hydrogen concentrations x. We vary the hydrogen concentration and trace variations in the acoustic plasmons properties. Finally, at 𝑥=1 the acoustic modes disappear in paramagnetic NiH. The explanation of such evolution is based on the changes in the population of different energy bands with hydrogen content variation., Y.M.K. acknowledges support from the Government research assignment for ISPMS SB RAS, project FWRW-2022-0001 (in the part of band structure calculations). I.V.S. acknowledges support from the Ministry of Education and Science of the Russian Federation within State Task No. FSWM-2020-0033 (in the part of electronic structure and dielectric function calculations). E.V.C. acknowledges support from Saint Petersburg State University (Project ID No. 90383050). V.M.S. acknowledges financial support by Grant No. PID2019-105488GB-I00 funded by MCIN/AEI/10.13039/501100011033/., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Janus CrSSe monolayer with interesting ferromagnetism

  • Han, Fanjunjie
  • Yan, Xu
  • Bergara, Aitor
  • Li, Wenjing
  • Yu, Hong
  • Yang, Guochun
The search for intrinsic half-metallic ferromagnetic (FM) monolayers with a high Curie temperature (TC), considerable magnetic anisotropy energy (MAE), and multiferroic coupling is key for the development of ultra-compact spintronics. Here, we have identified a new stable FM Janus monolayer, the tetrahedral CrSSe, through first-principles structural search calculations, which not only exhibits very interesting magnetoelectric properties with a high TC of 790 K, a large MAE of 0.622 meV per Cr, and robust half-metallicity, but also shows obvious ferroelasticity with a modest energy barrier of 0.31 eV per atom. Additionally, there appears to be interesting multiferroic coupling between in-plane magnetization and ferroelasticity. Furthermore, by replacing the Se/S atoms in the CrSSe monolayer with S/Se atoms, we obtained two new half-metallic FM CrS2 and CrSe2 monolayers, which also exhibit excellent magnetoelectric properties. Therefore, our findings provide a pathway to design novel multiferroic materials and enrich the understanding of 2D transition metal chalcogenides., The authors acknowledge the funding support from the Natural Science Foundation of China under Grant No. 21873017 and 21573037, the Postdoctoral Science Foundation of China under grant 2013M541283, the Hebei Natural Science Foundation (Grant No. B2021203030), the Science and Technology Project of Hebei Education Department (JZX2023020), the Foreign Expert Introduction Program (G2023003004L), and the Central Guiding Local Science and Technology Development Fund Projects (236Z7605G), A. B. acknowledges financial support from the Spanish Ministry of Science and Innovation (Grant No. PID2019-105488GB-I00) and the Department of Education, Universities and Research of the Basque Government and the University of the Basque Country (IT1707-22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Designing ternary superconducting hydrides with A15-type structure at moderate pressures

  • Wei, Xudong
  • Hao, Xiaokuan
  • Bergara, Aitor
  • Zurek, Eva
  • Liang, Xiaowei
  • Wang, Linyan
  • Song, Xiaoxu
  • Li, Peifang
  • Wang, Lin
  • Gao, Guoying
  • Tian, Yongjun
Ever since hydrogen-based superconductors have been actively considered as candidates for room-temperature superconductors, binary hydrides have been almost completely explored theoretically. Now researchers are turning their interest to ternary hydrides. However, the enormous compositional and structural possibilities in the ternary hydride space limit the search efficiency. Here, using an advanced crystal structure search method combined with first-principles calculations, a series of ternary hydrides AXH6 (MgPH6, MgAsH6, CaSbH6, CaSnH6, NaSbH6 and ScSiH6) with the A15-type structure are predicted to be stable at around one million atmospheres. Among them, CaSnH6 presents the lowest thermodynamically stable pressure of 110 GPa. CaSbH6, CaSnH6 and ScSiH6 may be dynamically stable down to 41 (70), 71 (90) and 86 (70) GPa, respectively, without (with) anharmonic effects and temperature effects. Hydrogen atoms in these A15-type structures are found to form weak covalent bonds to X atoms. More interestingly, we find that ternary hydrides with the AXH6 stoichiometry may assume the A15-type structure under pressure when the sum of the chemical valences of the two non-hydrogen atoms is six or seven. Based on electron-phonon coupling (EPC) calculations, all these ternary hydrides are estimated to be superconductors. CaSbH6, CaSnH6 and ScSiH6 have superconducting transition temperatures (Tcs) of 65, 53 and 116 K at 45, 75 and 90 GPa, respectively, while MgPH6 has the highest Tc of 148 K at 135 GPa. Our study will provide guidance for designing high Tc ternary hydrides near ambient pressures., This work was supported by Natural Science Foundation of China (Grant Nos. 52022089, 52090020, 2022YFA1402300, 2018YFA0703400, 52288102, 11964026). P.F. Li thanks Science and Technology Leading Talents and Innovation Team Building Projects of Inner Mongolia Autonomous Region (GXKY22060). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (Grant No. FIS2019-105488GB-I00) and the Department of Education, Universities and Research of the Basque Government and the University of the Basque Country (IT1707-22). E. Z. acknowledges the National Science Foundation (DMR-2136038) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emergent superconductivity in TaO3 at high pressures

  • Li, Wenjing
  • Li, Xing
  • Zhang, Xiaohua
  • Yu, Hong
  • Han, Fanjunjie
  • Bergara, Aitor
  • Lin, Jianyan
  • Wu, Jinhui
  • Yang, Guochun
Tantalum (Ta) is an interesting transition metal that exhibits superconductivity in its elemental states. Additionally, several Ta chalcogenides (S and Se) have also demonstrated superconducting properties. In this work, we propose the existence of five high-pressure metallic Ta–O compounds (e.g., TaO3, TaO2, TaO, Ta2O, and Ta3O), composed of polyhedra centered on Ta/O atoms. These compounds exhibit distinct characteristics compared to the well-known semiconducting Ta2O5. One particularly interesting finding is that TaO3 shows an estimated superconducting transition temperature (Tc) of 3.87 K at 200 GPa. This superconductivity is primarily driven by the coupling between the low-frequency phonons derived from Ta and the O 2p and Ta 5d electrons. Remarkably, its dynamically stabilized pressure can be as low as 50 GPa, resulting in an enhanced electron–phonon coupling and a higher Tc of up to 9.02 K. When compared to the superconductivity of isomorphic TaX3 (X = O, S, and Se) compounds, the highest Tc in TaO3 is associated with the highest NEF and phonon vibrational frequency. These characteristics arise from the strong electronegativity and small atomic mass of the O atom. Consequently, our findings offer valuable insights into the intrinsic physical mechanisms of high-pressure behaviors in Ta–O compounds., This work was supported by the Natural Science Foundation of China under No. 12204065 and 21873017, the Postdoctoral Science Foundation of China under Grant No. 2013M541283, the Natural Science Foundation of Hebei Province (Grant No. B2021203030), Science and Technology Project of Hebei Education Department (Grants No. JZX2023020), the Natural Science Foundation of Jilin Province (Grant No. 20220508020RC); the 14th Five-year Planning Project of Jilin Provincial Education Department Foundation (No. JJKH20220836KJ); the Natural Science Foundation of Changchun Normal University (Grant No. 003179). A. B. acknowledges financial support from the Spanish Ministry of Science and Innovation (Grant No. PID2019-105488GB-I00) and the Department of Education, Universities and Research of the Basque Government and the University of the Basque Country (Grant No. IT1707-22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interstitial anionic electrons favoring superconductivity in Li-As electrides

  • Zhao, Yaping
  • Bergara, Aitor
  • Zhang, Xiaohua
  • Li, Fei
  • Liu, Yong
  • Yang, Guochun
Interstitial anionic electrons (IAEs) at lattice cavities of electrides, which have diverse morphologies and concentrations, can induce interesting physical and chemical properties. Understanding the correlation between IAEs and electron-phonon coupling is crucial for the development of new electride superconductors. We have applied first-principles structural search calculations to predict new high-pressure Li-As electrides, such as P6/mmm LixAs (x=5 and 8), Li6As with Cmc21 and C2/c symmetries, and C2/mLi10X (X=As and Sb), which together with the already known C2/mLi10Te compound present favorable characteristics (i.e., variable donor content, structural symmetries, and acceptor species) to explore IAE-related superconductivity. According to our results, the predicted superconducting temperatures of these electrides are positively correlated with the number and connectivity of IAEs., This work was supported by the Natural Science Foundation of China (Grants No. 52025026, No. 21873017, No. 21573037, No. 22372142, and No. 12304028), the Postdoctoral Science Foundation of China (Grant No. 2013M541283), the Innovation Capability Improvement Project of Hebei Province (Grant No. 22567605H), the Natural Science Foundation of Hebei Province (Grant No. B2021203030), and the Science and Technology Project of the Hebei Education Department (Grants No. JZX2023020 and No. QN2023246). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (Grant No. PID2019-105488GB-I00), and the Department of Education, Universities and Research of the Basque Government, and the University of the Basque Country (Grant No. IT1707-22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On energetics of allotrope transformations in transition-metal diborides via plane-by-plane shearing

  • Leiner, Thomas
  • Koutná, Nikola
  • Janovec, Jozef
  • Zelený, Martin
  • Mayrhofer, Paul H.
  • Holec, David
Transition metal diborides crystallize in the 𝛼, 𝛾, or 𝜔 type structure, in which pure transition metal layers alternate with pure boron layers stacked along the hexagonal [0001] axis. Here we view the prototypes as different stackings of the transition metal planes and suppose they can transform from one into another by a displacive transformation. Employing first-principles calculations, we simulate sliding of individual planes in the group IV–VII transition metal diborides along a transformation pathway connecting the 𝛼, 𝛾, and 𝜔 structure. Chemistry-related trends are predicted in terms of energetic and structural changes along a transformation pathway, together with the mechanical and dynamical stability of the different stackings. Our results suggest that MnB2 and MoB2 possess the overall lowest sliding barriers among the investigated TMB2 s. Furthermore, we discuss trends in strength and ductility indicators, including Young’s modulus or Cauchy pressure, derived from elastic constants., NK acknowledges the Hertha Firnberg fellowship by Austrian Science Fund, FWF, (T30801). Computational resources were provided by the Vienna Scientific Cluster (VSC), the cluster at the Montanuniversität Leoben (MUL-hpc), and by Swedish National Infrastructure for Computing (SNIC), on the Clusters located at the National Supercomputer Centre (NSC) in Linköping, the Center for High Performance Computing (PDC) in Stockholm, and at the High Performance Computing Center North (HPC2N) in Umeå, Sweden. This work has been partially supported by the Spanish Ministry of Science and Innovation with PID2019-105488GB-I00 (JJ)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pressure-induced evolution of stoichiometries and electronic structures of host-guest Na-B compounds

  • Guo, Zixuan
  • Li, Xing
  • Bergara, Aitor
  • Ding, Shicong
  • Zhang, Xiaohua
  • Yang, Guochun
Superionic and electride behaviors in materials, which induce a variety of exotic physical properties of ions and electrons, are of great importance both in fundamental research and for practical applications. However, their coexistence in hot alkali-metal borides has not been observed. In this work, we apply first-principles structure search calculations to identify eight Na–B compounds with host–guest structures, which exhibit a wide range of building blocks and interesting properties linked to the Na/B composition. Among the known borides, Na-rich Na9B stands out as the composition with the highest alkali-metal content, featuring vertex- and face-sharing BNa16 polyhedra. Notably, it exhibits electride characteristics and transforms into a superionic electride at 200 GPa and 2000 K, displaying unusual Na atomic diffusion behavior attributed to the modulation of the interstitial anion electrons. It demonstrates semiconductor behavior in the solid state, and metallic properties associated with Na 3p/3s states in the superionic and liquid regions. On the other hand, B-rich NaB7, consisting of a unique covalent B framework, is predicted to exhibit low-frequency phonon-mediated superconductivity with a Tc of 16.8 K at 55 GPa. Our work advances the understanding of the structures and properties of alkali-metal borides., This work was supported by the Natural Science Foundation of China under Grant No. 21573037, the Postdoctoral Science Foundation of China under Grant No. 2013M541283, the Natural Science Foundation of Hebei Province (Grant No. B2021203030), and the Science and Technology Project of Hebei Education Department (Grant Nos. JZX2023020 and QN2023246). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (Grant No. PID2019-105488GB-I00) and the Department of Education, Universities and Research of the Basque Government and the University of the Basque Country (Grant No. IT1707-22). This work was carried out at the National Supercomputer Center in Tianjin, and the calculations were performed on TianHe-1(A)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superconductivity in Li8Au electride

  • Zhang, Xiaohua
  • Yao, Yansun
  • Ding, Shicong
  • Bergara, Aitor
  • Li, Fei
  • Liu, Yong
  • Zhou, Xiang-Feng
  • Yang, Guochun
Located at crystal voids, interstitial anion electrons (IAEs) have diverse topologies, which may be tuned to achieve different properties. Elucidating the role of IAEs in electron-phonon coupling (EPC), and using it to design electride superconductors, leads to the current prediction of superconducting Li8Au at high pressure. We suggest that the occurence of high-temperature superconductivity in electrides requires high-symmetry structures with hydrogenlike cages, an electron acceptor element to balance charges, and isolated IAEs coupled with medium-frequency vibrations. The uniquely designed Li8Au electride has a NaCl-type (B1) lattice, with atomic Au and cubic Li8 cages as bases. Isolated IAEs are formed at the cage centers, with extra charges taken up by Au. These octahedrally coordinated IAEs have a p-orbital-like attribute and are strongly coupled with atomic vibrations in the Li8 cages. The strong EPC in Li8Au results in a calculated Tc of 73.1 K at 250 GPa, which is the highest Tc reported to date for all the electrides. A slight substitutional Pt doping can enhance the Tc of Li8Au to exceed liquid nitrogen temperature., This work was supported by the National Key Research and Development Program of China (Grant No. 2022YFA1402300), the Natural Science Foundation of China under Grants No. 52025026, No. 21873017, and No. 21573037, the Postdoctoral Science Foundation of China under Grant No. 2013M541283, the Innovation Capability Improvement Project of Hebei province (Grant No. 22567605H), the Natural Science Foundation of Hebei Province (Grant No. B2021203030), Science and Technology Project of Hebei Education Department (Grants No. JZX2023020 and No. QN2023246), and Natural Sciences and Engineering Research Council of Canada (NSERC). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (Grant No. PID2019-105488GB-I00) and the Department of Education, Universities and Research of the Basque Government and the University of the Basque Country (Grant No. IT1707-22)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Theoretical elastic constants of tobermorite enhanced with reduced graphene oxide through hydroxyl vs epoxy functionalization: A first-principles study

  • Izadifar, Mohammadreza
  • Dolado, Jorge S.
  • Thissen, Peter
  • Ukrainczyk, Neven
  • Koenders, Eddie A.B.
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Graphene-based materials are considered excellent candidates to implement cementitious nanocomposites due to their mechanical properties. This paper presents a comprehensive interface interaction that ends up with computing the elastic properties for four models of the C–S–H gel, taking tobermorite 14 Å as an example, with reduced graphene oxide (rGO) to form reinforced (tobermorite) cementitious nanocomposites within the density functional theory. We found that upon relaxing the model structures, the dissociation of hydroxyl functional groups from the hydroxyl/rGO lattice occurs not only in the presence of Ca2+ ions to compensate for local charges but even when the Ca2+ charges are compensated with hydroxyl groups. In contrast, rGO/CSH interactions remained close to the initial structural models of the epoxy rGO surface. The elastic constants showed high improvements for the cementitious nanocomposite of tobermorite 14 Å with intercalated hydroxyl/rGO layers. Thus, the bulk modulus, shear modulus, Young’s modulus, and Poisson’s ratio increased up to limits set as 165, 128, 134, and 15% compared to tobermorite 14 Å, respectively. In more detail, the specific values of the elastic constants were influenced by the interface, specifically the presence of hydroxyl or epoxy groups as well as how the charges of the Ca2+ ions were compensated. These findings are of interest for the design of future experiments that will help to engineer better rGO/cement composites., This research was fully funded by Karlsruhe House of Young Science (KHYS) and Deutsche Forschungsgemeinschaft (DFG) with the project number of 446266595. A.A. and J.S.D. also acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2019-105488GB-I00, PCI2019-103657 grant, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the European Commission NRG-STORAGE project (GA 870114), MIRACLE project (GA 964450), and NaturSea-PV (GA 101084348). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantum plasmonics in sub-atom-thick optical slots

  • Baumberg, Jeremy J.
  • Esteban, Ruben
  • Hu, Shu
  • Muniain, Unai
  • Silkin, Igor V.
  • Aizpurua, Javier
  • Silkin, Viatcheslav M.
We show using time-dependent density functional theory (TDDFT) that light can be confined into slot waveguide modes residing between individual atomic layers of coinage metals, such as gold. As the top atomic monolayer lifts a few Å off the underlying bulk Au (111), ab initio electronic structure calculations show that for gaps >1.5 Å, visible light squeezes inside the empty slot underneath, giving optical field distributions 2 Å thick, less than the atomic diameter. Paradoxically classical electromagnetic models are also able to reproduce the resulting dispersion for these subatomic slot modes, where light reaches in-plane wavevectors ∼2 nm-1 and slows to <10-2c. We explain the success of these classical dispersion models for gaps ≥1.5 Å due to a quantum-well state forming in the lifted monolayer in the vicinity of the Fermi level. This extreme trapping of light may explain transient "flare" emission from plasmonic cavities where Raman scattering of metal electrons is greatly enhanced when subatomic slot confinement occurs. Such atomic restructuring of Au under illumination is relevant to many fields, from photocatalysis and molecular electronics to plasmonics and quantum optics., The work is supported by the European Research Council (ERC) under Horizon 2020 research and innovation programme PICOFORCE (Grant Agreement No. 883703), THOR (Grant Agreement No. 829067), and POSEIDON (Grant Agreement No. 861950). J.J.B. acknowledges funding from the EPSRC (Cambridge NanoDTC EP/L015978/1, EP/L027151/1, EP/S022953/1, EP/X037770/1). R.E., U. M., and J.A. acknowledge financial support from Grant PID2022-139579NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and from the Department of Education, Research and Universities of the Basque Government through Project Ref. No. IT 1526-22. The work of I.V.S. is supported by the Ministry of Science and Higher Education of the Russian Federation for funding in the framework of State Task (No. 0721-2020-0033) (in the part of electronic structure calculations). V.M.S. acknowledges financial support by Grant No. PID2019-105488GB-I00 funded by MCIN/AEI/10.13039/501100011033/., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic order and magnetic anisotropy in two-dimensional ilmenenes

  • Aguilera-del-Toro, Rodrigo Humberto
  • Arruabarrena, Agustín
  • Leonardo, Aritz
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Iron ilmenene is a new two-dimensional material that has recently been exfoliated from the naturally occurring iron titanate found in ilmenite ore, a material that is abundant on the earth's surface. In this work, we theoretically investigate the structural, electronic and magnetic properties of 2D transition-metal-based ilmenene-like titanates. The study of magnetic order reveals that these ilmenenes usually present intrinsic antiferromagnetic coupling between the 3d magnetic metals decorating both sides of the Ti–O layer. Furthermore, the ilmenenes based on late 3d brass metals, such as CuTiO3 and ZnTiO3, become ferromagnetic and spin compensated, respectively. Our calculations which include spin–orbit coupling reveal that the magnetic ilmenenes have large magnetocrystalline anisotropy energies when the 3d shell departs from being either filled or half-filled, with their spin orientation being out-of-plane for elements below half-filling of 3d states and in-plane above. These interesting magnetic properties of ilmenenes make them useful for future spintronic applications because they could be synthesized as already realized in the iron case., This work has been supported by the Spanish Ministry of Science and Innovation through grants PID2019-105488GB-I00, TED2021-132074B-C32 and PCI2019-103657. We acknowledge financial support by the European Commission from the MIRACLE (ID 964450), NaturSea-PV (ID 101084348), and NRG-STORAGE project (GA 870114). The Basque Government supported this work through Project No. IT-1569-22. M. A. was supported by the Spanish Ministry of Science and Innovation through the FPI PhD Fellowship BES-2017-079677. R. H. A.-T. acknowledges the postdoctoral contract from the Donostia International Physics Center., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wigner-Seitz truncated time-dependent density functional theory approach for the calculation of exciton binding energies in solids

  • Arruabarrena, Agustín
  • Leonardo, Aritz
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Time-dependent density functional theory (TDDFT) has established itself as a computationally efficient and effective alternative to the many-body perturbation theory for calculating the optical properties of solids. Within the framework of linear response formalism, TDDFT exhibits good agreement between optical absorption spectra and experimental data, as well as the possibility of directly determining exciton binding energies. However, the family of exchange-correlation kernels, known as long-range-corrected kernels, which accurately capture excitonic features, face challenges in simultaneously generating visually appealing spectra and precise exciton binding energies. Recently, progress has been made in addressing this discrepancy through a hybrid-TDDFT approach. Our study reveals that the key lies in the numerical treatment of the long-range Coulomb singular term. We conduct a meticulous investigation of the impact of the term in both pure-TDDFT and hybrid approaches using a Wigner-Seitz truncated kernel. Notably, we show that computing this term presents formidable technical difficulties in both approaches, pointing to the need for an improved description of the electron-hole interaction., We acknowledge funding from the Spanish Ministry of Science and Innovation (Grants No. PID2019-105488GB-I00, No. PCI2019-103657, No. PID2022-139230NB-I00, and No. TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (Project No. IT-1569-22), the European Commission NRGSTORAGE Project (GA 870114), MIRACLE Project (GA 964450), and NaturSea-PV (GA 101084348). This research was conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials. Computations for this research were conducted on DIPC supercomputer computational resources. M.A. was supported by the Spanish Ministry of Science and Innovation through the FPI PhD Fellowship BES-2017-079677., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of high-temperature superconductors at moderate pressures by alloying AlH3 or GaH3

  • Liang, Xiaowei
  • Wei, Xudong
  • Zurek, Eva
  • Bergara, Aitor
  • Li, Peifang
  • Gao, Guoying
  • Tian, Yongjun
Since the discovery of hydride superconductors, a significant challenge has been to reduce the pressure required for their stabilization. In this context, we propose that alloying could be an effective strategy to achieve this. We focus on a series of alloyed hydrides with the AMH6 composition, which can be made via alloying A15 AH3 (A = Al or Ga) with M (M = a group ⅢB or IVB metal), and study their behavior under pressure. Seven of them are predicted to maintain the A15-type structure, similar to AH3 under pressure, providing a platform for studying the effects of alloying on the stability and superconductivity of AH3. Among these, the A15-type phases of AlZrH6 and AlHfH6 are found to be thermodynamically stable in the pressure ranges of 40–150 and 30–181 GPa, respectively. Furthermore, they remain dynamically stable at even lower pressures, as low as 13 GPa for AlZrH6 and 6 GPa for AlHfH6. These pressures are significantly lower than that required for stabilizing A15 AlH3. Additionally, the introduction of Zr or Hf increases the electronic density of states at the Fermi level compared with AlH3. This enhancement leads to higher critical temperatures (Tc) of 75 and 76 K for AlZrH6 and AlHfH6 at 20 and 10 GPa, respectively. In the case of GaMH6 alloys, where M represents Sc, Ti, Zr, or Hf, these metals reinforce the stability of the A15-type structure and reduce the lowest thermodynamically stable pressure for GaH3 from 160 GPa to 116, 95, 80, and 85 GPa, respectively. Particularly noteworthy are the A15-type GaMH6 alloys, which remain dynamically stable at low pressures of 97, 28, 5, and 6 GPa, simultaneously exhibiting high Tc of 88, 39, 70, and 49 K at 100, 35, 10, and 10 GPa, respectively. Overall, these findings enrich the family of A15-type superconductors and provide insights for the future exploration of high-temperature hydride superconductors that can be stabilized at lower pressures., This work was supported by the Natural Science Foundation of China (Grant Nos. 52022089, 52372261, 52288102, and 11964026), the National Key R&D Program of China (Grant No. 2022YFA1402300), the Natural Science Foundation of Hebei Province (Grant No. E2022203109), the Doctoral Fund of Henan University of Technology (Grant No. 31401579). P.L. thanks the Science and Technology Leading Talents and Innovation Team Building Projects of the Inner Mongolia Autonomous Region (Grant No. GXKY22060). A.B. acknowledges financial support from the Spanish Ministry of Science and Innovation (Grant No. FIS2019-105488GB-I00) and the Department of Education, Universities and Research of the Basque Government and the University of the Basque Country (Grant No. IT1707-22). E.Z. acknowledges the National Science Foundation (Grant No. DMR-2136038) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced vacuum ultraviolet photoemission from graphene nanoribbons

  • Corso, Martina
  • Lobo-Checa, Jorge
  • Weber, Andrew P.
  • Piquero-Zulaica, Ignacio
  • Abd El-Fattah, Zakaria M.
  • Le Fèvre, Patrick
  • Ortega, J. Enrique
  • Krasovskii, Eugene
Photon-energy dependence of photoemission from seven-atoms-wide armchair graphene nanoribbons (GNRs) is studied experimentally and theoretically up to ¯hω = 95 eV. A strong photon energy dependence of the normal emission from the valence band maximum (VB1) is observed, sharply peaked at ¯hω = 12 eV. The detailed analysis of the light-polarization dependence of the photoemission from VB1 unambiguously characterizes the symmetry of the state. The experimental observations are analyzed based on ab initio one-step theory of photoemission. Off-normal emission is studied in detail and its relation to the standing-wave character of the valence band states is discussed. Excellent agreement with the earlier experiment (Senkovskiy et al 2018 2D Mater. 5 035007) is obtained. Rapid variations of the intensity with the ribbon-transverse photoelectron momentum are predicted from the ab initio theory, which are at variance with the prediction of the tight-binding rigid-wall model. These findings can help interpret angle-resolved photoemission measurements of similar systems. Moreover, the strong enhancement of the photoyield could trigger the GNR application as narrow-band photodetectors and contribute to the design of novel photocathodes for vacuum ultraviolet photodetection., We acknowledge financial support from the Spanish Ministry of Science and Innovation (MCIN, Grants No. PID2019-107338RB-C63, PID2019-107338RB-C64 & PID2019-105488GB-I00 / AEI / 10.13039/501100011033 and RED2018-102833-T), from the Basque Government (IT1591-22), and from the regional Governments of Aragon (E12-20R). The research leading to this result has been supported by the project CALIPSOplus under Grant Agreement 730872 from the EU Framework Program for Research and Innovation HORIZON 2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-particle approach to many-body relaxation dynamics

  • Pelc, Marta
  • Dams, David
  • Ghosh, Abhishek
  • Kosik, Miriam
  • Müller, Marvin M.
  • Bryant, Garnett W.
  • Rockstuhl, Carsten
  • Ayuela, Andrés
  • Słowik, Karolina
  • MIRACLE Project ID: 964450
This paper addresses the challenge of modeling relaxation dynamics in quantum many-body systems, specifically focusing on electrons in graphene nanoflakes. While quantum many-body techniques effectively describe dynamics up to a few particles, these approaches become computationally intractable for large systems. Larger systems may be tackled with a single-particle approach that, however, struggles to incorporate relaxation effects. Existing relaxation models encounter issues such as an inability to capture system complexity and violation of the Pauli principle. In this paper, we propose a single-particle model that accounts for various relaxation effects at the crossroads of quantum optics and solid-state photonics, that overcomes the limitations of previous models. Our approach is rooted in the quantum-optical Lindblad model, where relaxation rates are deactivated once the target levels saturate due to the Pauli principle. This approach is referred to as the saturated-Lindblad model. To validate the predictions of the saturated-Lindblad model, we confront them against phenomenological and many-body physics models in low-dimensional systems, including atomic chains and graphene nanoflakes. Remarkably, the saturated-Lindblad model exhibits excellent agreement with few-body calculations, distinguishing itself from other existing approaches. Moreover, by assigning different relaxation rates to different transitions, we successfully reproduce cascade deexcitation dynamics and predict emission spectra. The saturated-Lindblad model offers the ability to describe dynamics in systems of practical sizes, encompassing a wide range of structures that can be effectively captured within the single-particle description., A.G., M.P., and K.S. acknowledge support from the National Science Centre, Poland (Project No. 2020/39/I/ST3/00526). D.D. and C.R. acknowledge support by the German Research Foundation under Grant No. RO 3640/14-1 within Project No. 465163297. M.M.M. and C.R. acknowledge support by the German Research Foundation under Grant No. RO 3640/8-1 within Project No. 378579271. A.A. acknowledges the support of the Spanish Ministry of Science and Innovation through Grants No. PID2019-105488GB-I00 and No. PID2022-139230NB-I00, and No. TED2021-132074B-C32. We acknowledge financial support from the European Commission from projects MIRACLE (Grant No. 964450), NaturSea-PV (Grant No.101084348), and NRG-STORAGE (Grant No. GA 870114). The Basque Government supported this work through Project No. IT-1569-22. A.G., M.P., and K.S. are grateful to the Donostia International Physics Center for their kind hospitality., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low density phases of TiO2 by cluster self-assembly

  • Aguilera-Granja, Faustino
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
The interest in titanium dioxide (TiO2) phases is growing due to the number of applications in cosmetics, food industry and photocatalysis, an increase that is driven by its exceptional properties when engineered at the nanoscale like in the form of nanoparticles. Our goal is to discover unknown low-density phases of TiO2, with potential for applications in various fields. We then use well-known TiO2 clusters as fundamental building blocks to be self-assembled into unique structures to study their distinct characteristics. Density functional calculations are employed to relax the structures and identify the most stable TiO2 structures within an energy range of 0.1 eV per atom from the rutile and anatase phases, which are confirmed, validating our methodology. Going beyond conventional phases, we found two-dimensional TiO2 structures, previously explored in separate studies, and showing typical structures of transition metal dichalcogenide layers, that forge a bridge between different TiO2 structures. It is noteworthy that our investigation uncovered an entirely novel class of TiO2 structures featuring hexagonal cages like beehive channels, opening novel phases with huge potential. These discovered low-density phases are interesting, particularly the hexagonal cage structures with remarkable large gaps, because they introduce other dimensions for uncharted applications in the ever-growing TiO2 landscape., We acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2019-105488GB-I00, PCI2019-103657 grant, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the Diputación Foral de Gipuzkoa (Project No. 2023-CIEN-000077-01), the European Commission NRG-STORAGE project (GA 870114), MIRACLE project (GA 964450), and NaturSea-PV (GA 101084348). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials. Computations for this research were conducted on DIPC supercomputer computational resources, and in the IPICYT’S National Supercomputing Center supported this research with the computational time grant TKII-E-0424-I-090424-20/PR-22. Finally, we also acknowledge to José Limón from IF-UASLP for computational support in the calculations., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bending rigidity, sound propagation and ripples in flat graphene

  • Aseginolaza, Unai
  • Diego, Josu
  • Cea, Tommaso
  • Bianco, Raffaello
  • Monacelli, Lorenzo
  • Libbi, Francesco
  • Calandra, Matteo
  • Bergara, Aitor
  • Mauri, Francesco
  • Errea, Ion
Many of the applications of graphene rely on its uneven stiffness and high thermal conductivity, but the mechanical properties of graphene—and, in general, of all two-dimensional materials—are still not fully understood. Harmonic theory predicts a quadratic dispersion for the out-of-plane flexural acoustic vibrational mode, which leads to the unphysical result that long-wavelength in-plane acoustic modes decay before vibrating for one period, preventing the propagation of sound. The robustness of quadratic dispersion has been questioned by arguing that the anharmonic phonon–phonon interaction linearizes it. However, this implies a divergent bending rigidity in the long-wavelength regime. Here we show that rotational invariance protects the quadratic flexural dispersion against phonon–phonon interactions, and consequently, the bending stiffness is non-divergent irrespective of the temperature. By including non-perturbative anharmonic effects in our calculations, we find that sound propagation coexists with a quadratic dispersion. We also show that the temperature dependence of the height fluctuations of the membrane, known as ripples, is fully determined by thermal or quantum fluctuations, but without the anharmonic suppression of their amplitude previously assumed. These conclusions should hold for all two-dimensional materials., Financial support was provided by the Spanish Ministry of Economy and Competitiveness (FIS2016-76617-P); the Spanish Ministry of Science and Innovation (grant nos. PID2019-105488GB-I00 and PID2022-142861NA-I00); the Department of Education, Universities and Research of the Basque Government and the University of the Basque Country (IT1707-22 and IT1527-22); and the European Commission under the Graphene Flagship, Core3, grant no. 881603. M.C. acknowledges support from ICSC—Centro Nazionale di Ricerca in HPC, Big Data and Quantum Computing, funded by the European Union under NextGenerationEU. U.A. is thankful to the Material Physics Center for a predoctoral fellowship. J.D. thanks the Department of Education of the Basque Government for a predoctoral fellowship (grant no. PRE-2020-1-0220). L.M. acknowledges funding support from the European Union under the Marie Curie Individual Fellowship THERMOH., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Light-induced reorientation transition in an antiferromagnetic semiconductor

  • Fichera, Bryan T.
  • Rodriguez-Vega, Martin
  • Aguilera-del-Toro, Rodrigo Humberto
  • Arruabarrena, Mikel
  • Leonardo, Aritz
  • Ayuela, Andrés
  • Fiete, Gregory A.
  • Gedik, Nuh
Bryan T. Fichera et al., Because of the lack of a net magnetic moment, antiferromagnets possess a unique robustness to external magnetic fields and are thus predicted to play an important role in future magnetic technologies. However, this robustness also makes them quite difficult to control, and the development of novel methods to manipulate these systems with external stimuli is a fundamental goal of antiferromagnetic spintronics. In this work, we report evidence for a metastable reorientation of the order parameter in an antiferromagnetic semiconductor triggered by an ultrafast quench of the equilibrium order via photoexcitation above the band gap. The metastable state forms less than 10 ps after the excitation pulse, and persists for longer than 150 ps before decaying to the ground state via thermal fluctuations. Importantly, this transition cannot be induced thermodynamically, and requires the system to be driven out of equilibrium. Broadly speaking, this phenomenology is ultimately the result of large magnetoelastic coupling in combination with a relatively low symmetry of the magnetic ground state. Since neither of these properties are particularly uncommon in magnetic materials, the observations presented here imply a generic path toward novel device technology enabled by ultrafast dynamics in antiferromagnets., B. T. F., B. L., K. M., Z. S., B. I., T. L., and N. G. acknowledge support from the U.S. Department of Energy, BES DMSE (data taking and analysis), and Gordon and Betty Moore Foundation’s EPiQS Initiative Grant No. GBMF9459 (instrumentation). C. L., E. D., A. L.-P., and J. O. acknowledge support from the Quantum Materials program under the Director, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division, of the U.S. Department of Energy, Contract No. DE-AC02-05CH11231. G. A. F. gratefully acknowledges support from the NSF through the Center for Dynamics and Control of Materials: an NSF MRSEC under DMR-1720595, NSF DMR2114825, and the Alexander von Humboldt Foundation. R. H. A. d. T., M. A., A. L., and A. A. acknowledge support from the Spanish Ministry of Science and Innovation through Grants No. PID2019–105488 GB-I00, No. TED2021-132074B-C32, and No. PID2022-PID2022-139230NB-I00, the European Commission from the MIRACLE (No. 964450), and the Basque Government through Project No. IT-1569-22. B. L. acknowledges support from the Ministry of Science and Technology of China (2023YFA1407400), the National Natural Science Foundation of China (12374063), and the Shanghai Natural Science Fund for Original Exploration Program (23ZR1479900)., Peer reviewed