Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 69
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Cool Concrete Incorporating Carbonated Periwinkle Shell: A Sustainable Solution for Mitigating Urban Heat Island Effects

  • Goracci, Guido
  • Saeed, Ebtisam
  • Ogundiran, Mary B.
  • Iturrospe Ibarra, Amaia
  • Arbe Méndez, María Aranzazu
  • Aymonier, Cyril
  • Sánchez Dolado, Jorge
The urban heat island effect has become a critical issue in urban areas, intensifying heat-related problems and increasing energy consumption. A sustainable cement formulation that combines ordinary Portland cement (OPC) with a carbonated aggregate derived from Periwinkle shell powder for the development of an efficient cool material is presented. Through a carbonation process, the aggregate undergoes a transformation, capturing carbon dioxide (CO2) and converting it into calcite. The resulting cement mixture exhibits high solar reflective properties, making it a potential candidate for cool pavement and roof applications. In this study, the raw materials, including the Periwinkle shell powder, were characterized, and the carbonation process was evaluated to quantify the CO2 capture efficiency. Additionally, a real test of the efficiency of this new cement on a roof demonstrated that the material achieved a significant cooling effect, being 6 °C cooler than that with standard OPC at the peak of solar radiation., The project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement no. 964450 (MIRACLE project). Moreover, this work is part of the project TED2021-132074B–C31, funded by MCIN/AEI/10.13039/501100011033 and the EU “NextGenerationEU”/PRTR. A.I. and A.A. acknowledge the grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR”, as well as the financial support of Eusko Jaurlaritza, code: IT1566-22. MBO acknowledges the financial support from the Women for Africa Foundation (Fundación Mujeres por frica), Marid, Spain for the research visit and is grateful to the Director, Centro de Fsica de Materiales, CSIC-UPV/EHU, San Sebastián, Spain for making available the research facilities for the study. We also thank the LTC Green Concrete and the UPV/EHU for the funding of an E. Saeed PhD grant.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Dimerization Effects and Negative Strain Energy in Silicon Monosulfide Nanotubes

  • Alonso Lanza, Tomás
  • Aguilera Granja, Faustino
  • Ayuela Fernández, Andrés
We report on the construction and characterization of silicon monosulfide nanotubes that were obtained by rolling up two-dimensional materials isoelectronic to phosphorene in the recently discovered layered Pmma and 𝛽 phases. We relaxed and studied the nanotube structures using computational methods within density functional theory (DFT). We found that the nanotubes with a thick Pmma layer remain stable at room temperature, and their electronic properties depend on their diameters. Small-diameter nanotubes display metallic character, while nanotubes with increasing diameter show semiconducting ground states due to the dimerization in the silicon–silicon distances that opens a gap, leading to interesting optical properties in the near-infrared region. Furthermore, we discovered 𝛽 SiS monolayer nanotubes having negative strain energies, similar to the well-known imogolite inorganic nanotubes. The combined thermal stability, compelling optical properties, and diverse applications of these silicon monosulfide nanotubes underscore the demand for novel synthesis methods to fully explore their potential in various fields., This research was funded by the Spanish Ministry of Science and Innovation (grants no. PID2019-105488GB-I00, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the European Commission NRG-STORAGE project (project no. GA 870114), H2020-FET OPEN Project MIRACLE (No. GA 964450), and NaturSea-PV (ID 101084348).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Magnetic order and magnetic anisotropy in two-dimensional ilmenenes

  • Aguilera del Toro, Rodrigo Humberto
  • Arruabarrena Larrarte, Mikel
  • Leonardo Liceranzu, Aritz
  • Ayuela Fernández, Andrés
Iron ilmenene is a new two-dimensional material that has recently been exfoliated from the naturally occurring iron titanate found in ilmenite ore, a material that is abundant on the earth's surface. In this work, we theoretically investigate the structural, electronic and magnetic properties of 2D transition- metal-based ilmenene-like titanates. The study of magnetic order reveals that these ilmenenes usually present intrinsic antiferromagnetic coupling between the 3d magnetic metals decorating both sides of the Ti–O layer. Furthermore, the ilmenenes based on late 3d brass metals, such as CuTiO3 and ZnTiO3, become ferromagnetic and spin compensated, respectively. Our calculations which include spin–orbit coupling reveal that the magnetic ilmenenes have large magnetocrystalline anisotropy energies when the 3d shell departs from being either filled or half-filled, with their spin orientation being out-of-plane for elements below half-filling of 3d states and in-plane above. These interesting magnetic properties of ilmenenes make them useful for future spintronic applications because they could be synthesized as already realized in the iron case., This work has been supported by the Spanish Ministry of Science and Innovation through grants PID2019-105488GB-I00, TED2021-132074B-C32 and PCI2019-103657. We acknowledge nancial support by the European Commission from the MIRACLE (ID 964450), NaturSea-PV (ID 101084348), and NRG- STORAGE project (GA 870114). The Basque Government sup- ported this work through Project No. IT-1569-22. M. A. was supported by the Spanish Ministry of Science and Innovation through the FPI PhD Fellowship BES-2017-079677. R. H. A.-T. acknowledges the postdoctoral contract from the Donostia International Physics Center.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Cementitious materials as promising radiative coolers for solar cells

  • Cagnoni, Matteo
  • Tibaldi, Alberto
  • Sánchez Dolado, Jorge
  • Cappelluti, Federica
Nowadays, radiative coolers are extensively investigated for the thermal management of solar cells with the aim of improving their performance and lifetime. Current solutions rely on meta-materials with scarce elements or complex fabrication processes, or organic polymers possibly affected by UV degradation. Here, the potential of innovative cement-based solutions as a more sustainable and cost-effective alternative is reported. By combining chemical kinetics, molecular mechanics and electromagnetic simulations, it is shown that the most common cements, i.e., Portland cements, can be equipped with excellent radiative cooling properties, which might enable a reduction of the operating temperature of solar cells by up to 20 K, with outstanding efficiency and lifetime gains. This study represents a first step toward the realization of a novel class of energy-efficient, economically viable and robust radiative coolers, based on cheap and available cementitious materials., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 964450.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From single-particle-like to interaction-mediated plasmonic resonances in graphene nanoantennas

  • Müller, Marvin M.
  • Kosik, Miriam
  • Pelc, Marta
  • Bryant, Garnett W.
  • Ayuela, Andrés
  • Rockstuhl, Carsten
  • Słowik, Karolina
Plasmonic nanostructures attract tremendous attention as they confine electromagnetic fields well below the diffraction limit while simultaneously sustaining extreme local field enhancements. To fully exploit these properties, the identification and classification of resonances in such nanostructures is crucial. Recently, a novel figure of merit for resonance classification has been proposed [Müller et al., J. Phys. Chem. C 124, 24331–24343 (2020)] and its applicability was demonstrated mostly to toy model systems. This novel measure, the energy-based plasmonicity index (EPI), characterizes the nature of resonances in molecular nanostructures. The EPI distinguishes between either a single-particle-like or a plasmonic nature of resonances based on the energy space coherence dynamics of the excitation. To advance the further development of this newly established measure, we present here its exemplary application to characterize the resonances of graphene nanoantennas. In particular, we focus on resonances in a doped nanoantenna. The structure is of interest, as a consideration of the electron dynamics in real space might suggest a plasmonic nature of selected resonances in the low doping limit but our analysis reveals the opposite. We find that in the undoped and moderately doped nanoantenna, the EPI classifies all emerging resonances as predominantly single-particle-like, and only after doping the structure heavily, the EPI observes plasmonic response., M.M.M. acknowledges financial support through the Research Travel Grant by the Karlsruhe House of Young Scientists (KHYS). M.M.M. and C.R. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (Project No. 378579271) within Project RO 3640/8-1 and from the VolkswagenStiftung. M.M.M. is grateful for the support of the Toruń Astrophysics/Physics Summer Program TAPS 2019 and the PROM (Project No. PPI/PRO/2018/1/00016/U/001) by the Polish National Agency for Academic Exchange. M.M.M., M.K., and K.S. acknowledge the hospitality of the Donostia International Physics Center. M.K. acknowledges financial support from the National Science Centre, Poland (Grant No. 2016/23/D/ST2/02064). M.P. and A.A. acknowledge financial support by Project No. PID2019-105488GB-I00 of the Spanish Ministry of Science and Innovation, and the Gobierno Vasco UPV/EHU (Project No. IT1246-19). K.S. acknowledges support from the National Science Centre, Poland (Project No. 2016/23/G/ST3/04045), the European Commission from the NRG-STORAGE project (GA 870114) and H2020-FET OPEN project MIRACLE (GA 964450)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modification of the optical properties of molecular chains upon coupling to adatoms

  • Müller, Marvin M.
  • Kosik, Miriam
  • Pelc, Marta
  • Bryant, Garnett W.
  • Ayuela, Andrés
  • Rockstuhl, Carsten
  • Słowik, Karolina
Adsorbed atoms (adatoms) coupled to the matrix of solid state host materials as impurities can significantly modify their properties. Especially in low-dimensional materials, such as one-dimensional organic polymer chains or quasi-one-dimensional graphene nanoribbons, intriguing manipulation of the optical properties, such as the absorption cross section, is possible. The most widely used approach to couple quantum emitters to optical antennas is based on the Purcell effect. This formalism, however, does not comprise charge transfer from the emitter to the antenna, but only spontaneous emission of the quantum emitter into the tailored photonic environment, that is evoked by the antenna. To capture such effects, we present a tight-binding formalism to couple an adatom to a finite Su-Schrieffer-Heeger chain, where the former is treated as a two-level system and the latter acts as an optical antenna. We systematically analyze how the coupling strength and the position of the adatom influence the optical properties of the molecular chains in the model. We take into account charge transfer from the adatom to the chain and vice versa via an intersystem hopping parameter, and also include Coulomb interaction within the chain as well as between the adatom and the chain. We show that coupling the adatom to one of the bulk atoms of the linear chain results in a substantial change in optical properties already for comparatively small coupling strengths. We also find that the position of the adatom crucially determines if and how the optical properties of the chains are altered. Therefore, we identify this adatom-chain hybrid system as a tunable platform for light-matter interaction at the nanoscale., M.M.M. acknowledges financial support through the Research Travel Grant by the Karlsruhe House of Young Scientists (KHYS). M.M.M. and C.R. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (Project No. 378579271) within Project RO 3640/8-1 and from the VolkswagenStiftung. M.K. and K.S. acknowledge the support from the National Science Centre, Poland (Project No. 2016/23/G/ST3/04045). A.A. acknowledges support from the Spanish Ministry of Science and Innovation with Grants No. PID2019-105488GB-I00 and No. PCI2019-103657, the Basque Government through the University of the Basque Country Project No. IT-1246-19, and the European Commission from the NRG-STORAGE Project (No. GA 870114) and H2020-FET OPEN Project MIRACLE (No. GA 964450)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Passive radiative cooling of solar cells by low-cost and scalable metamaterials: physical simulation and efficiency limits

  • Cagnoni, Matteo
  • Tibaldi, Alberto
  • Testa, Pietro
  • Dolado, Jorge S.
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
Editor(s): Alexandre Freundlich, Stéphane Collin, Karin Hinzer.-- SPIE OPTO, 22 January - 28 February 2022. San Francisco, California, United States.-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Radiative cooling is an attractive concept for future sustainable energy strategies, as it might enable passive cooling of buildings and photovoltaic systems, hence facilitating energy savings by boosting performance and lifespan. The key idea is the adoption of materials that strongly emit thermal radiation in the atmosphere transparency window (wavelengths between 8 and 13 μm) as cooling layers. Significant progress in the field of metamaterials has enabled the realization of dielectric photonic structures with properties matching radiative cooling requirements and capable of going below ambient temperature. However, these structures are rather expensive and appear unsuitable for today’s large-scale manufacturing. In the present work, we have studied radiative cooling applied to Shockley-Queisser solar cells by exploring alternative materials, namely cementitious phases, which exhibit the required properties while being low-cost and scalable. We have determined their emission behavior by electromagnetic simulations and estimated the corresponding solar cell operating temperature by means of a detailed-balance model. The results have been benchmarked against the current state-of-the-art and hint at the possible realization of a new class of radiative coolers based on cheap and scalable cementitious materials., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Análisis de los principales compuestos del cemento para enfriado radiativo

  • Lezaun, Carlos
  • Dolado, Jorge S.
  • Pérez-Escudero, José M.
  • Liberal, Íñigo
  • Beruete, Miguel
  • MIRACLE Project ID: 964450
XXXVI Simposium Nacional de la Unión Científica Internacional de Radio, URSI 2021, Vigo, Spain (online), 20-25 Sep. 2021.-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., In this work, a study of the viability of using concrete for radiative cooling is done by theoretically analysing some of the main compounds of concrete: C3S, CH and CSH. Atomistic simulations have been employed for determining the structure and the dielectric response of these phases. Interestingly, the materials have theoretically shown a night-time net cooling power of 55.68 W, 60.96 W and 62.43 W respectively. This preliminary study shows the potential of concrete as a possible cheap, scalable and widely used night-time radiative cooling structural material. Further research must be done in order to achieve a higher reflection in the solar band for day-time radiative cooling. To calculate de emissivity of the compounds, an analytical model has been used, which has nearly zero error and computes the data much faster than a simulator., Este trabajo ha recibido financiación del programa de investigación e innovación Horizonte 2020 de la Unión Europea, proyecto MIRACLE, Grant Agreement 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Development of a Radiative Cooling Material Database to Benchmark the Environmental Impact of a newly Developed Photonic Meta-Concrete

  • Adams, Nick
  • Allacker, Karen
  • MIRACLE Project ID: 964450
Society of Environmental Toxicology and Chemistry (SETAC) conference in Copenhagen (15-19/05/2022).-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Global warming and the heat-island-effect in cities led to an increased use of conventional air-conditioners. This increased usage is responsible for 10% of the total energy consumption and 7% of global greenhouse gas emissions. In the overall aim to reduce these greenhouse gas emissions and to mitigate climate change and the heat-island-effect, a new radiative cooling material is under development. Although radiative cooling materials already exist, this material stands out because, for the first time, it is based on conventional concrete. This poster describes the first step of the environmental life cycle assessment (LCA) study that is performed along the development of the photonic meta-concrete (PMC). In this step we generate a database with environmental data of existing radiative cooling materials in order to create a comparative base for the PMC. Information about the various materials is collected through a literature review and consultation of experts. The environmental impact of the materials are assessed with the Belgian LCA method for buildings, i.e. the MMG method. The MMG method is in line with the EN15804:A2 and hence covers 16 environmental impact categories, such as global warming potential, acidification, eutrophication, water scarcity, toxicity. Furthermore, the environmental impact will be compared with the first composition of the photonic meta-concrete. The first results show that a lot of product-specific information regarding radiative cooling materials is lacking to date to assess their environmental impact and this makes it challenging to create a reference database. However, the environmental impact of the radiative cooling materials assessed in this paper is in line with the expectations. The first mixture of the photonic meta-concrete is promising as this shows great potential from an environmental point of view compared to the existing daytime radiative cooling materials., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Computational design of a Massive Solar-Thermal Collector enhanced with Phase Change Materials

  • Peralta, Ignacio
  • Fachinotti, Víctor D.
  • Koenders, Eddie A.B.
  • Caggiano, Antonio
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., A cement-based device that can meet, partially or completely, the heating loads of a building by absorbing the solar radiation and converting it into thermal energy can be defined as a Massive Solar-Thermal Collector. The absorbing material for the incoming radiation is made of a cementitious composite, generally concrete, and flowing water inside tubes acts as a heat transfer medium. For an optimized performance, during periods of solar radiation, the device has to efficiently conduct the heat flow from the absorbing surface of the collector and transfer this heat energy to the water. Then, when the radiation is reduced or became null, the device should retain as much as possible the heat energy, reducing the heat that is escaping the collector and consequently the losses to the surrounding environment. In this work, by performing a parametric analysis, different absorbing materials are tested with the objective of finding the best configuration that maximizes the energy efficiency of the collector. Cementitious materials, in combination with Phase Change Materials with distinct melting (and solidification) temperatures, are selected as candidate absorbing materials. The weather variables of an entire year and for two different locations are considered to evaluate the behavior of these devices in opposite climates. After numerical simulations, in where an enthalpy-based finite element formulation is used to solve the physical problem, the obtained results allow to conclude that the inclusion of Phase Change Materials within the absorber material of the collectors, if it is done in a correct way, can improve the energy performance of these devices. In this study, 34 °C and 53 °C are chosen as the most appropriated melting temperatures, which conduct to considerable improvements in the achieved performances, and in both warm and cold climates., The authors gratefully acknowledge the financial support from: - The National Scientific and Technical Research Council (CONICET) of Argentina. - The CONICET through the project “Computational design of functional thermal metamaterials in transient regime taking advantage of phase changes” (PIP 11220200101018CO). - The National Agency for the Promotion of Research, Technological Development and Innovation (AGENCIA) of Argentina through the project “Computational design of metamaterials applied to the development of thermal diodes for building envelopes” (PICT 2020 SERIE A 03765). - The National Technological University (UTN) of Argentina, for Grant PID MAUTNFE0007745. - The Technical University of Darmstadt, for the “Future Talent (Guest Stay)” and “Career Bridging” Grants, both given to the first author of this work. - The NRG-STORAGE project (870114, 2020-2024,https://nrg-storage.eu/), financed by the European Union H2020 Framework under the LC-EEB-01-2019 call, IA type. - The MIRACLE project (964450, 2021-2025,https://miracle-concrete.eu/), financed by the European Union H2020 Framework under the FETOPEN-01-2018-2019-2020 call, RIA type. - The support to networking activities provided by the PoroPCM Project (part of the EIG CONCERT - Japan funding,http:concert-japan.eu/) is also gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Environmental impact assessment to support the development of new Photonic Meta-Concrete

  • Adams, Nick
  • Allacker, Karen
  • MIRACLE Project ID: 964450
Environment within Planetary Boundaries (SBE Berlin) 20/09/2022 - 23/09/2022 Berlin.-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., The cooling demand in buildings has increased over the past decades due to global warming, the heat-island-effect in cities and the increased airtightness and thermal resistance of the building envelope. This led to an increased use of conventional air-conditioners, which now account for 7% of global greenhouse gas emissions and 10% of the total energy consumption. In this context, the MIRACLE project aims at developing a new Photonic Meta-Concrete (PMC) with remarkable photonic properties to reduce the CO2 footprint of buildings, mitigate the heat-island-effect and global warming. Besides the positive effect that this innovative material can have on the environment during the use phase of buildings, also the environmental impact of the production needs to be minimized. Environmental impact assessment (EIA) is used along the development process of this innovative material to guarantee a low material environmental impact. This paper discusses how EIA is used along the development process and presents the preliminary results in the early stages of the development of the PMC. To investigate the impact of this new material, a cradle-to-gate analysis of the resources, energy and machinery needed to create the concrete mixture is performed. The broad set of environmental indicators of the EC PEF (Product Environmental Footprint) method, such as climate change, acidification, eutrophication, particulate matter, ecotoxicity, water depletion and human toxicity are being considered. Considering such a large set of indications ensures that burden shifting is avoided. The environmental impact of the PMC is moreover compared to the impact of conventional concrete to understand how both perform., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Enhancing the infrared and visible emission properties of calcium silicate hydrate for radiative cooling using metamaterials

  • Lezaun, Carlos
  • Dolado, Jorge S.
  • Torres-García, Alicia E.
  • Pérez-Escudero, José M.
  • Liberal, Íñigo
  • Beruete, Miguel
  • MIRACLE Project ID: 964450
2022 47th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz), 28 August 2022 - 02 September 2022; Delft, Netherlands.-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Two periodic structures composed of metal cylinders with different orientations are used to improve the solar reflection of calcium silicate hydrate (CSH) while maintaining its atmospheric emission. Interesting effects have been found when the distance between bars is small, suggesting that lattice effects, arising from the interaction between the rods could be leveraged in the design of these metamaterials. The size of the metal bars is selected based on state of the art micro-manufacturing techniques. This study limits its scope to a CSH gel model; i.e. the most important component of cement-based materials. Further research will be undertaken to consider a best description of the dielectric function of concrete., This work has been funded by the research and innovation program Horizon 2020 of the European union. Project MIRACLE, Grant Agreement 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development and potential environmental impact of Photonic Meta-Concrete

  • Adams, Nick
  • Allacker, Karen
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
IOP Conference Series: Earth and Environmental Science, Volume 1085, SBE22Delft - Innovations for the Urban Energy Transition: Preparing for the European Renovation Wave 11/11/2022-13/11/2022 Delft, Netherlands.-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., In the overall aim to reduce the heat-island-effect in cities and the related use of conventional air-conditioners, which now account for 7% of global greenhouse gas emissions and 10% of the total energy consumption, a Photonic Meta-Concrete (PMC) is currently being developed. This "MIRACLE" concrete is designed to contain remarkable photonic properties to make daytime radiative cooling possible. With these characteristics, the PMC can be used to fight global warming, reduce the CO2 footprint and mitigate the heat-island-effect. This paper describes the principal working of the new PMC and presents the first results of the development. In the first stage, the most appropriate composition of the concrete mixture is searched for. This is done by trying to develop a mixture with the desired photonic properties, a high emissivity in the Atmospheric Window (AW) and a high reflectivity to minimize solar gains. A range of composites are tested and compared within this step. Secondly, an environmental impact assessment (EIA) study is performed along the development of the PMC in order to support decision taking. The resources and energy needed to create the concrete mixture are analysed from cradle-to-gate and a comparison with conventional concrete is made to investigate the impact of this new material. This EIA study is performed according to the EC PEF (Product Environmental Footprint) method, a broad set of indicators are assessed, including climate change. Considering such a large set of indicators ensures that burden shifting is avoided., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cementitious materials as promising radiative coolers for solar cells

  • Cagnoni, Matteo
  • Tibaldi, Alberto
  • Dolado, Jorge S.
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
Part of special issue: SI: Advanced thermal control: fundamentals and applications. Edited by Miguel Muñoz Rojo, Andrej Kitanovski, Karl Joulain., Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Nowadays, radiative coolers are extensively investigated for the thermal management of solar cells with the aim of improving their performance and lifetime. Current solutions rely on meta-materials with scarce elements or complex fabrication processes, or organic polymers possibly affected by UV degradation. Here, the potential of innovative cement-based solutions as a more sustainable and cost-effective alternative is reported. By combining chemical kinetics, molecular mechanics and electromagnetic simulations, it is shown that the most common cements, i.e., Portland cements, can be equipped with excellent radiative cooling properties, which might enable a reduction of the operating temperature of solar cells by up to 20 K, with outstanding efficiency and lifetime gains. This study represents a first step toward the realization of a novel class of energy-efficient, economically viable and robust radiative coolers, based on cheap and available cementitious materials., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Localization versus delocalization of d-states within the Ni 2 MnGa Heusler alloy

  • Janovec, Jozef
  • Zelený, Martin
  • Heczko, Oleg
  • Ayuela, Andrés
We present calculations based on density-functional theory with improved exchange-correlation approaches to investigate the electronic structure of Ni2 MnGa magnetic shape memory alloy prototype. We study the effects of hybrid functionals as well as a Hubbard-like correction parameter U on the structural, electronic and magnetic properties of the alloy. We show that the previously successful application of U on Mn should be extended by including U on Ni to describe the d localized electrons more accurately and in better agreement with experiments. The bonding interactions within this intermetallic alloy are analysed including the role of non-transition metal. We found that the strongest and most stabilizing bond is formed between the Ga–Ni pairs due to the delocalized s–s and p–s orbital hybridization. Our findings suggest that minimization of the over-delocalization error introduced by standard semi-local exchange-correlation functionals leads to a better description of the Ni2 MnGa alloy. Furthermore we propose that the experimental total magnetic moment of Ni–Mn–Ga alloys could be increased after carefully selected heat treatment procedures., This work was supported by the Czech Science Foundation, Grant No. 21-06613S, and by the Operational Program Research, Development and Education financed by the European Structural and Investment Funds and the Czech Ministry of Education, Youth and Sports (MEYS CR) (project MATFUN CZ.02.1.01/0.0/0.0/15_003/0000487). J.J. and A.A. acknowledges the Spanish Ministry of Science and Innovation with PID2019-105488GB-I00, TED2021-132074B-C32, and PCI2019-103657, the Basque Government through the University of the Basque Country Project No. IT-1569-22, the European Commission from the NRG-STORAGE Project (No. GA 870114), H2020-FET OPEN Project MIRACLE (No. GA 964450), EUSKAMPUS foundation and the “Green Concrete” Transborder Lab., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revising quantum optical phenomena in adatoms coupled to graphene nanoantennas

  • Kosik, Miriam
  • Müller, Marvin M.
  • Słowik, Karolina
  • Bryant, Garnett W.
  • Ayuela, Andrés
  • Rockstuhl, Carsten
  • Pelc, Marta
Graphene flakes acting as photonic nanoantennas may sustain strong electromagnetic field localization and enhancement. To exploit the field enhancement, quantum emitters such as atoms or molecules should be positioned in such close proximity to the flake that electron tunneling might influence the optical and electronic properties of the system. However, tunneling is usually not considered if the optical coupling mechanism between quantum emitters and nanoantennas is at focus. This work presents a framework for describing the electron dynamics in hybrid systems consisting of graphene nanoflakes coupled both electronically and optically to adatoms and subject to external illumination. Our framework combines the single-particle tight-binding approach with a nonlinear master equation formalism that captures both optical and electronic interactions. We apply the framework to demonstrate the impact of electron tunneling between the adatom and the flake on emblematic quantum optical phenomena: degradation of coherent Rabi oscillations and quenching of Purcell spontaneous emission enhancement in two-level adatoms in proximity of triangular graphene nanoflakes., M.K. acknowledges support from the National Science Centre, Poland (Project No. 2016/23/G/ST3/04045). M.P. and K.S. acknowledge support from the National Science Centre, Poland (Project No. 2020/39/I/ST3/00526). M.M.M. acknowledges financial support through the Research Travel Grant by the Karlsruhe House of Young Scientists (KHYS). M.M.M. and C.R. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (Project No. 378579271) within Project RO 3640/8-1 and from the VolkswagenStiftung. A.A. acknowledges the Spanish Ministry of Science and Innovation with PID2019-105488GB-I00 and PCI2019-103657, the Basque Government through the University of the Basque Country Project No. IT-1246-19, the European Commission from the NRG-STORAGE Project (No. GA 870114) and H2020-FET OPEN Project MIRACLE (No. GA 964450). A.A. carried this study under the Translacional CommonLaboratory (LTC-Green Concrete)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rhombohedral trilayer graphene is more stable than its Bernal counterpart

  • Guerrero-Avilés, Raúl
  • Pelc, Marta
  • Geisenhof, Fabian R.
  • Weitz, R. Thomas
  • Ayuela, Andrés
Stackings in graphene have a pivotal role in properties that could be useful in the future, as seen in the recently found superconductivity of twisted bilayer graphene. Beyond bilayer graphene, the stacking order of multilayer graphene can be rhombohedral, which shows flat bands near the Fermi level that are associated with interesting phenomena, such as tunable conducting surface states that can be expected to exhibit spontaneous quantum Hall effect, surface superconductivity, and even topological order. However, the difficulty in exploring rhombohedral graphenes is that in experiments, the alternating, hexagonal stacking is the most commonly found geometry and has been considered to be the most stable configuration for many years. Here we reexamine this stability issue in line with current ongoing studies in various laboratories. We conducted a detailed investigation of the relative stability of trilayer graphene stackings and showed how delicate this aspect is. These few-layer graphenes appear to have two basic stackings with similar energies. The rhombohedral and Bernal stackings are selected using not only compressions but anisotropic in-plane distortions. Furthermore, switching between stable stackings is more clearly induced by deformations such as shear and breaking of the symmetries between graphene sublattices, which can be accessed during selective synthesis approaches. We seek a guide on how to better control – by preserving and changing – the stackings in multilayer graphene samples., This research was funded by the Spanish Ministry of Science and Innovation (grants no. PID2019-105488GB-I00), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), and the European Commission NRG-STORAGE project (project no. GA 870114) and H2020-FET OPEN Project MIRACLE (No. GA 964450). This research was conducted in the scope of the Transnational Common Laboratory (LTC) “Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Suppressed-scattering spectral windows for radiative cooling applications

  • Pérez-Escudero, José M.
  • Torres-García, Alicia E.
  • Lezaun, Carlos
  • Caggiano, Antonio
  • Peralta, Ignacio
  • Dolado, Jorge S.
  • Beruete, Miguel
  • Liberal, Íñigo
  • MIRACLE Project ID: 964450
The scattering of light by resonant nanoparticles is a key process for enhancing the solar reflectance in daylight radiative cooling. Here, we investigate the impact of material dispersion on the scattering performance of popular nanoparticles for radiative cooling applications. We show that, due to material dispersion, nanoparticles with a qualitatively similar response at visible frequencies exhibit fundamentally different scattering properties at infrared frequencies. It is found that dispersive nanoparticles exhibit suppressed-scattering windows, allowing for selective thermal emission within a highly reflective sample. The existence of suppressed-scattering windows solely depends on material dispersion, and they appear pinned to the same wavelength even in random composite materials and periodic metasurfaces. Finally, we investigate calcium-silicate-hydrate (CSH), the main phase of concrete, as an example of a dispersive host, illustrating that the co-design of nanoparticles and host allows for tuning of the suppressed-scattering windows. Our results indicate that controlled nanoporosities would enable concrete with daylight passive radiative cooling capabilities., The authors acknowledge financial support from European Union’s Horizon 2020 research and innovation program under grant agreement 964450, MIRACLE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dimerization effects and negative strain energy in silicon monosulfide nanotubes

  • Alonso-Lanza, Tomás
  • Aguilera-Granja, Faustino
  • Ayuela, Andrés
This article belongs to the Special Issue Modeling, Simulation and Optimization of Nanomaterials., We report on the construction and characterization of silicon monosulfide nanotubes that were obtained by rolling up two-dimensional materials isoelectronic to phosphorene in the recently discovered layered Pmma and 𝛽 phases. We relaxed and studied the nanotube structures using computational methods within density functional theory (DFT). We found that the nanotubes with a thick Pmma layer remain stable at room temperature, and their electronic properties depend on their diameters. Small-diameter nanotubes display metallic character, while nanotubes with increasing diameter show semiconducting ground states due to the dimerization in the silicon–silicon distances that opens a gap, leading to interesting optical properties in the near-infrared region. Furthermore, we discovered 𝛽 SiS monolayer nanotubes having negative strain energies, similar to the well-known imogolite inorganic nanotubes. The combined thermal stability, compelling optical properties, and diverse applications of these silicon monosulfide nanotubes underscore the demand for novel synthesis methods to fully explore their potential in various fields., This research was funded by the Spanish Ministry of Science and Innovation (grants no. PID2019-105488GB-I00, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the European Commission NRG-STORAGE project (project no. GA 870114), H2020-FET OPEN Project MIRACLE (No. GA 964450), and NaturSea-PV (ID 101084348). This research was conducted in the scope of the Transnational Common Laboratory (LTC) “Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Theoretical elastic constants of tobermorite enhanced with reduced graphene oxide through hydroxyl vs epoxy functionalization: A first-principles study

  • Izadifar, Mohammadreza
  • Dolado, Jorge S.
  • Thissen, Peter
  • Ukrainczyk, Neven
  • Koenders, Eddie A.B.
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Graphene-based materials are considered excellent candidates to implement cementitious nanocomposites due to their mechanical properties. This paper presents a comprehensive interface interaction that ends up with computing the elastic properties for four models of the C–S–H gel, taking tobermorite 14 Å as an example, with reduced graphene oxide (rGO) to form reinforced (tobermorite) cementitious nanocomposites within the density functional theory. We found that upon relaxing the model structures, the dissociation of hydroxyl functional groups from the hydroxyl/rGO lattice occurs not only in the presence of Ca2+ ions to compensate for local charges but even when the Ca2+ charges are compensated with hydroxyl groups. In contrast, rGO/CSH interactions remained close to the initial structural models of the epoxy rGO surface. The elastic constants showed high improvements for the cementitious nanocomposite of tobermorite 14 Å with intercalated hydroxyl/rGO layers. Thus, the bulk modulus, shear modulus, Young’s modulus, and Poisson’s ratio increased up to limits set as 165, 128, 134, and 15% compared to tobermorite 14 Å, respectively. In more detail, the specific values of the elastic constants were influenced by the interface, specifically the presence of hydroxyl or epoxy groups as well as how the charges of the Ca2+ ions were compensated. These findings are of interest for the design of future experiments that will help to engineer better rGO/cement composites., This research was fully funded by Karlsruhe House of Young Science (KHYS) and Deutsche Forschungsgemeinschaft (DFG) with the project number of 446266595. A.A. and J.S.D. also acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2019-105488GB-I00, PCI2019-103657 grant, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the European Commission NRG-STORAGE project (GA 870114), MIRACLE project (GA 964450), and NaturSea-PV (GA 101084348). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Radiative cooling properties of portlandite and tobermorite: Two cementitious minerals of great relevance in concrete science and technology

  • Dolado, Jorge S.
  • Goracci, Guido
  • Arrese-Igor, Silvia
  • Ayuela, Andrés
  • Torres, Angie
  • Liberal, Íñigo
  • Beruete, Miguel
  • Gaitero, Juan J.
  • Cagnoni, Matteo
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Although concrete and cement-based materials are the most engineered materials employed by mankind, their potential for use in daytime radiative cooling applications has yet to be fully explored. Due to its complex structure, which is composed of multiple phases and textural details, fine-tuning of concrete is impossible without first analyzing its most important ingredients. Here, the radiative cooling properties of Portlandite (Ca(OH)2) and Tobermorite (Ca5Si6O16(OH)2·4H2O) are studied due to their crucial relevance in cement and concrete science and technology. Our findings demonstrate that, in contrast to concrete (which is a strong infrared emitter but a poor sun reflector), both Portlandite and Tobermorite exhibit good radiative cooling capabilities. These results provide solid evidence that, with the correct optimization of composition and porosity, concrete can be transformed into a material suitable for daytime radiative cooling., The project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 964450 (MIRACLE project (www.miracle-concrete.eu) from the EU Commission). The support of the LTC Green Concrete is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Extended detailed balance modeling toward solar cells with cement-based radiative coolers

  • Cagnoni, Matteo
  • Testa, Pietro
  • Dolado, Jorge S.
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., The data that support the findings of this study are available from the corresponding author upon reasonable request., Reducing the temperature of a solar cell increases its efficiency and lifetime. This can be achieved by radiative cooling, a passive and simple method relying on materials that dump heat into outer space by thermal emission within the atmosphere transparency window between 8 and (Formula presented.). As most radiative coolers are expensive or possibly UV unstable, we have recently proposed cement-based solutions as a robust and cost-effective alternative. However, the assessment model used describes the cell in the radiative limit and with perfect thermal coupling to the cooler, in line with the literature. In this work, we lift these two approximations, by incorporating Auger and Shockley–Read–Hall nonradiative recombination and a finite heat transfer coefficient at the cell/cooler interface, to obtain a thermal description of the cell/cooler stack closer to reality, while preserving the universality and transparency of the detailed-balance approach. We use this model to demonstrate that the cell performance gains provided by a radiative cooler are underestimated in the radiative limit and are hence more prominent in devices with stronger nonradiative recombination. Furthermore, we quantify the relation between cell temperature and heat transfer coefficient at the cell/cooler interface and show how this can be used to define design requirements. The extended model developed, and the resulting observations provide important guidelines toward the practical realization of novel radiative coolers for solar cells, including cement-based ones., This research was supported by the European Union's Horizon 2020 Research and Innovation Program under grant agreement no. 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Radiative Cooling of Solar Cells with Cement-Based Materials

  • Cagnoni, Matteo
  • Testa, Pietro
  • Dolado, Jorge S.
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
Proceedings of the 40th European Photovoltaic Solar Energy Conference and Exhibition in Lisbon, Portugal 020075 (WIP Renewable Energies, Lisbon, PT, 2023).-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Lowering the operating temperature of solar cells can increase efficiency and lifespan of these devices. Among the available thermal management options, radiative cooling shines because of its passive nature and systemic simplicity. Unfortunately, the applicability of most radiative coolers to industrial manufacturing is questioned by high cost or UV instability. We have recently shown that stable and cost-effective cement-based materials can be designed to be suitable radiative coolers for solar cells. However, we have done so in line with the literature, by modeling the solar cell in the radiative limit and neglecting the thermal contact resistance at the cell/cooler interface, which might actually be large enough to hinder heat transfer because of the poor adhesion properties of cement-based materials. In this work, we have generalized the model used to assess radiative coolers by incorporating solar cell non-radiative losses (Auger, Shockley-Read-Hall) and a thermal barrier between cell and cooler. The final model provides a description of the thermal behavior of a solar cell with radiative cooler closer to reality, while preserving the transparency of the detailed-balance approach, that has allowed us to better assess these systems and provide design guidelines, with focus on cement-based radiative coolers., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Cement-Based Radiative Coolers for Photovoltaics: Towards a Practical Design

  • Cagnoni, Matteo
  • Testa, Pietro
  • Dolado, Jorge S.
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., In 2014, the experimental realization of radiative coolers capable of reaching sub-ambient temperatures under direct sunlight has opened up new possibilities for the thermal management of solar cells. Radiative coolers eject excess heat by emitting thermal radiation within the so-called atmosphere transparency window. The completely passive nature of this process and its reliance on material properties only, make radiative coolers extremely attractive in terms of energy efficiency. Integrated with a photovoltaic cell, the radiative cooler can reduce the cell operating temperature, leading to high efficiency and lifetime gains. Yet, most radiative coolers in the literature are metamaterials with scarce elements or complex fabrications processes, or organic materials with potential UV instability, with questionable economic viability or reliability. To address this problem, we have recently proposed cement-based materials as a low-cost, scalable and stable solution for photovoltaics cooling, showing that their electromagnetic properties can be tuned to maximize their thermal emissivity by acting on their microstructure. In particular, using a detailed balance model, we have demonstrated that their cooling performance could increase the efficiency of silicon solar cells by up to 9% and extended their lifetime by up to 4 times. In this work, we take a further step towards the experimental realization of this attractive concept, by investigating possible approaches, requirements and prospects for the practical design of photovoltaic systems employing cement-based radiative coolers., This project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 964450.-- Conference Proceedings of the 16th ICCC, Bangkok, 18-22 September 2023., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preliminary environmental benchmarks for a new Photonic Meta-Concrete based on state of the art radiative cooling materials

  • Adams, Nick
  • Allacker, Karen
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., The usage of conventional air-conditioners increased due to global warming and the urban heat-island-effect in cities. These systems are responsible for 7% of global greenhouse gas emissions and 10% of the total energy consumption. Radiative Cooling is a passive cooling strategy which tries to mitigate global warming and the urban heat-island-effect by emitting heat through the atmosphere, into outer space. These materials are already studied for several decades, but for the first time a radiative cooling material is under development based on conventional concrete. In order to evaluate the environmental performance of this newly developed material compared to existing cooling materials, environmental benchmarks need to be defined. To determine such benchmark, existing, state of the art, daytime radiative cooling materials are assessed in this paper. Information on these materials is collected through a literature review. The radiative cooling materials are modelled using the generic Ecoinvent v3.6 database and the environmental impact is assessed using the Belgian LCA method for buildings, i.e. the MMG method. This method is in line with the EN15804:A2 and covers 16 environmental impact categories, such as global warming potential, acidification, eutrophication, water scarcity and toxicity. The results show that the production process of the materials, i.e. thin film deposition techniques, are poorly represented in the Ecoinvent database. Assumptions and adaptations are made based on literature and experts' feedback. A sensitivity analysis is carried out to gain insight in the uncertainty of the assumptions made. Based on the results, preliminary environmental benchmarks are generated and the environmental impact of the first composition of the photonic meta-concrete is assessed against these benchmarks., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Deep learning data PMC

  • Asociación de la Industria Navarra (AIN)
  • Universidad Pública de Navarra (UPNA)
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Dataset that includes the geometric characteristics (7) and the emissivity curve (110 points between 0-25um) of four vertically embedded alumnium fibers in CSH substrate., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

MIRACLE_WP1_FF Modelling_CH

  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Cementitious matrices are composed of Portlandite (CH) and a porous element, called C-S-H gel that resembles Tobermorite minerals. The dielectric response of CH has been calculated through Force Field simulations by using a software package called GULP (https://gulp.curtin.edu.au/). This datasets annexes the output of our FF simulation for CH, where the complex dielectric function of this minerals can be found. This dataset was used for the publication https://doi.org/10.1021/acsaom.3c00082., European Commission: 964450, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

MIRACLE_WP1_FF Modelling_Tob11

  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Cementitious matrices are composed of Portlandite (CH) and a porous element, called C-S-H gel that resembles Tobermorite minerals. The dielectric response of Tobermorite has been calculated through Force Field simulations by using a software package called GULP (https://gulp.curtin.edu.au/). This datasets annexes the output of our FF simulation for Tobermorite , where the complex dielectric function of this minerals can be found. This dataset was used for the publication https://doi.org/10.1021/acsaom.3c00082., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal conductivity of layered minerals using molecular dynamics simulation: A case study on calcium sulfates

  • Sarkar, Prodip Kumar
  • Mitra, Nilanjan
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Layered minerals containing inter-layer water show directional anisotropy. In previous work, the authors have shown that this inter-layer water affects the mechanical performance of these minerals. Even though difference in thermal conductivity of minerals has been alluded to in experimental literature due to presence of water molecules within crystal, a detailed coordinated theoretical study has not been carried out. In this work, a molecular dynamics study has been presented on sulfates of calcium to demonstrate that thermal conductivity is indeed reduced with the presence of inter-layer water. The correlation between the vibration of different molecular groups to the thermal transport mechanism of the material has been investigated. It has been observed that vibration modes of H2O molecules have a negligible contribution to thermal transport eventually reducing thermal conductivity perpendicular to the water layer. Even though calcium sulfate has been chosen for this study, it can be anticipated that similar behaviors can be observed with other minerals in which inter-layer water is present. This study represents a detailed structure–property correlation in the thermal transport mechanism through layered minerals., This research was also carried out under the umbrella of the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/ 501100011033 and co-founded by the European Union (Programaci’ on Conjunta Internacional 2019) and the projects MIRACLE (GA 964450) and NRG-STORAGE (GA 870114) funded by the European Commission. We also acknowledge the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete. This work was born under the umbrella of the project “Photonic Metaconcrete with Infrared RAdiative Cooling Capacity for Large Energy Savings (MIRACLE: GA 964450)” funded by the European Union (Programacion Conjunta Internacional 2019) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cool concrete incorporating carbonated Periwinkle Shell: a sustainable solution for mitigating urban heat island effects

  • Goracci, Guido
  • Saeed, Ebtisam
  • Ogundiran, Mary B.
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Aymonier, Cyril
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
The urban heat island effect has become a critical issue in urban areas, intensifying heat-related problems and increasing energy consumption. A sustainable cement formulation that combines ordinary Portland cement (OPC) with a carbonated aggregate derived from Periwinkle shell powder for the development of an efficient cool material is presented. Through a carbonation process, the aggregate undergoes a transformation, capturing carbon dioxide (CO2) and converting it into calcite. The resulting cement mixture exhibits high solar reflective properties, making it a potential candidate for cool pavement and roof applications. In this study, the raw materials, including the Periwinkle shell powder, were characterized, and the carbonation process was evaluated to quantify the CO2 capture efficiency. Additionally, a real test of the efficiency of this new cement on a roof demonstrated that the material achieved a significant cooling effect, being 6 °C cooler than that with standard OPC at the peak of solar radiation., The project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement no. 964450 (MIRACLE project). Moreover, this work is part of the project TED2021-132074B–C31, funded by MCIN/AEI/10.13039/501100011033 and the EU “NextGenerationEU”/PRTR. A.I. and A.A. acknowledge the grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR”, as well as the financial support of Eusko Jaurlaritza, code: IT1566-22. MBO acknowledges the financial support from the Women for Africa Foundation (Fundación Mujeres por frica), Marid, Spain for the research visit and is grateful to the Director, Centro de Fsica de Materiales, CSIC-UPV/EHU, San Sebastián, Spain for making available the research facilities for the study. We also thank the LTC Green Concrete and the UPV/EHU for the funding of an E. Saeed PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Temperature of single-junction solar cells with Ordinary Portland Cement radiative cooler

  • Cagnoni, Matteo
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., [The OPC emissivity has been calculated with Transfer-Matrix-Method applied to a slab having roughness RMS and complex permittivity obtained by applying the effective medium theory of Slovick (Slovick, B. A. Negative Refractive Index Induced by Percolation in Disordered Metamaterials. Physical Review B 95, 094202 (2017)) to the OPC microstructure calculated with µic (https://micepfl.sourceforge.net/) and using the complex permittivity obtained by CSIC with GULP (https://gulp.curtin.edu.au/) for the homogeneous phases. This is described in detail in Cagnoni, M., Tibaldi, A., Dolado, J. S. & Cappelluti, F. Cementitious Materials as Promising Radiative Coolers for Solar Cells. iScience 25, 105320 (2022).], [The solar cell operating temperature when coupled to the OPC based radiative cooler has been obtained by means of the detailed-balance model commonly employed in the literature. This is discussed in detail in Cagnoni, M., Tibaldi, A., Dolado, J. S. & Cappelluti, F. Cementitious Materials as Promising Radiative Coolers for Solar Cells. iScience 25, 105320 (2022).], This dataset contains information of the behavior of temperature of single-junction solar cells with Ordinary Portland Cement radiative cooler., - The OPC emissivity has been calculated with Transfer-Matrix-Method applied to a slab having roughness RMS and complex permittivity obtained by applying the effective medium theory of Slovick (Slovick, B. A. Negative Refractive Index Induced by Percolation in Disordered Metamaterials. Physical Review B 95, 094202 (2017)) to the OPC microstructure calculated with µic (https://micepfl.sourceforge.net/) and using the complex permittivity obtained by CSIC with GULP (https://gulp.curtin.edu.au/) for the homogeneous phases. This is described in detail in Cagnoni, M., Tibaldi, A., Dolado, J. S. & Cappelluti, F. Cementitious Materials as Promising Radiative Coolers for Solar Cells. iScience 25, 105320 (2022). - The solar cell operating temperature when coupled to the OPC based radiative cooler has been obtained by means of the detailed-balance model commonly employed in the literature. This is discussed in detail in Cagnoni, M., Tibaldi, A., Dolado, J. S. & Cappelluti, F. Cementitious Materials as Promising Radiative Coolers for Solar Cells. iScience 25, 105320 (2022)., European Commission: 964450, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Reflectivity Portlandite

  • Goracci, Guido
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., We measured the reflectivity of Portlandite fine powder across a frequency range of 0.36-15 microns. The results are a combination of two datasets: one measured by a portable spectrophotometer (410-Solar, Surface Optics Corp.) and the other by an FTIR spectrometer (Jasco 6300) with an integrated sphere (PIKE). We extracted the data using SolarData and SpectraManager software, then merged it with KaleidaGraph software. The final merged data were exported to a .txt file., European Commission: 964450, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Reflectivity Tobermorite

  • Goracci, Guido
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., [MIR: The reflectivity of the sample was determined by means of a gold-coated 12° integrating sphere in downward configuration equipped with an MCT detector from PIKE and mounted on an FTIR JASCO 6300 spectrometer. For these measurements, sample consisted of or fine-grained powders, which were inserted into the sphere according to manufacturer specifications. UV-VIS-NIR: Reflectivity was measured by using a portable spectrophotometer (410-SOLAR). Sample was in fine ground] [Data were processed by using Spectra Manager (JASCO) and SolarDATA (Surface Optics Corp) and then extracted to .cvs and .txt file. Finally, the data were merged using Kaleidagraph software and saved as .txt], We measured the reflectivity of Portlandite fine powder across a frequency range of 0.36-15 microns. The results are a combination of two datasets: one measured by a portable spectrophotometer (410-Solar, Surface Optics Corp.) and the other by an FTIR spectrometer (Jasco 6300) with an integrated sphere (PIKE). We extracted the data using SolarData and SpectraManager software, then merged it with KaleidaGraph software. The final merged data were exported to a .txt file., European Commission: 964450, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Reflectivity White Cement

  • Goracci, Guido
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., [MIR: The reflectivity of the sample was determined by means of a gold-coated 12° integrating sphere in downward configuration equipped with an MCT detector from PIKE and mounted on an FTIR JASCO 6300 spectrometer. For these measurements, sample consisted of or fine-grained powders, which were inserted into the sphere according to manufacturer specifications. UV-VIS-NIR: Reflectivity was measured by using a portable spectrophotometer (410-SOLAR). Sample was in fine ground] [Data were processed by using Spectra Manager (JASCO) and SolarDATA (Surface Optics Corp) and then extracted to .cvs and .txt file. Finally, the data were merged using Kaleidagraph software and saved as .txt], We measured the reflectivity of White Cement paste fine powder across a frequency range of 0.36-15 microns. The results are a combination of two datasets: one measured by a portable spectrophotometer (410-Solar, Surface Optics Corp.) and the other by an FTIR spectrometer (Jasco 6300) with an integrated sphere (PIKE). We extracted the data using SolarData and SpectraManager software, then merged it with KaleidaGraph software. The final merged data were exported to a .txt file., European Commission: 964450, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic order and magnetic anisotropy in two-dimensional ilmenenes

  • Aguilera-del-Toro, Rodrigo Humberto
  • Arruabarrena, Agustín
  • Leonardo, Aritz
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Iron ilmenene is a new two-dimensional material that has recently been exfoliated from the naturally occurring iron titanate found in ilmenite ore, a material that is abundant on the earth's surface. In this work, we theoretically investigate the structural, electronic and magnetic properties of 2D transition-metal-based ilmenene-like titanates. The study of magnetic order reveals that these ilmenenes usually present intrinsic antiferromagnetic coupling between the 3d magnetic metals decorating both sides of the Ti–O layer. Furthermore, the ilmenenes based on late 3d brass metals, such as CuTiO3 and ZnTiO3, become ferromagnetic and spin compensated, respectively. Our calculations which include spin–orbit coupling reveal that the magnetic ilmenenes have large magnetocrystalline anisotropy energies when the 3d shell departs from being either filled or half-filled, with their spin orientation being out-of-plane for elements below half-filling of 3d states and in-plane above. These interesting magnetic properties of ilmenenes make them useful for future spintronic applications because they could be synthesized as already realized in the iron case., This work has been supported by the Spanish Ministry of Science and Innovation through grants PID2019-105488GB-I00, TED2021-132074B-C32 and PCI2019-103657. We acknowledge financial support by the European Commission from the MIRACLE (ID 964450), NaturSea-PV (ID 101084348), and NRG-STORAGE project (GA 870114). The Basque Government supported this work through Project No. IT-1569-22. M. A. was supported by the Spanish Ministry of Science and Innovation through the FPI PhD Fellowship BES-2017-079677. R. H. A.-T. acknowledges the postdoctoral contract from the Donostia International Physics Center., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wigner-Seitz truncated time-dependent density functional theory approach for the calculation of exciton binding energies in solids

  • Arruabarrena, Agustín
  • Leonardo, Aritz
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Time-dependent density functional theory (TDDFT) has established itself as a computationally efficient and effective alternative to the many-body perturbation theory for calculating the optical properties of solids. Within the framework of linear response formalism, TDDFT exhibits good agreement between optical absorption spectra and experimental data, as well as the possibility of directly determining exciton binding energies. However, the family of exchange-correlation kernels, known as long-range-corrected kernels, which accurately capture excitonic features, face challenges in simultaneously generating visually appealing spectra and precise exciton binding energies. Recently, progress has been made in addressing this discrepancy through a hybrid-TDDFT approach. Our study reveals that the key lies in the numerical treatment of the long-range Coulomb singular term. We conduct a meticulous investigation of the impact of the term in both pure-TDDFT and hybrid approaches using a Wigner-Seitz truncated kernel. Notably, we show that computing this term presents formidable technical difficulties in both approaches, pointing to the need for an improved description of the electron-hole interaction., We acknowledge funding from the Spanish Ministry of Science and Innovation (Grants No. PID2019-105488GB-I00, No. PCI2019-103657, No. PID2022-139230NB-I00, and No. TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (Project No. IT-1569-22), the European Commission NRGSTORAGE Project (GA 870114), MIRACLE Project (GA 964450), and NaturSea-PV (GA 101084348). This research was conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials. Computations for this research were conducted on DIPC supercomputer computational resources. M.A. was supported by the Spanish Ministry of Science and Innovation through the FPI PhD Fellowship BES-2017-079677., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Cement-based Radiactive Coolers for Photovoltataics: Towards a Practical Design

  • Cagnoni, Matteo
  • Testa, Pietro
  • Dolado, Jorge S.
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
16th International Congress on the Chemistry of Cement 2023 (18-22 September 2023).-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Improving the efficiency of solar cells through radiative cooling

  • Testa, Pietro
  • Cappelluti, Federica
  • Cagnoni, Matteo
  • Tibaldi, Alberto
  • MIRACLE Project ID: 964450
Polito EECE Posterday (2023), 2023 PhD Poster Day EECE" at Politecnico di Torino held on Sept 28 (2023)..-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Radiative cooling of solar cells with low-cost, scalable cementitious materials

  • Cagnoni, Matteo
  • Testa, Pietro
  • Dolado, Jorge S.
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
1th Conferenza della Rete Italiana del Fotovoltaico (IFV)" on June 2023.-- Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Refractory and thermoelectric properties of stabilized Tricalcium aluminate allotrope: A first-principles calculation approach

  • Agbaoye, Ridwan O.
  • Ayuela, Andrés
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Tricalcium aluminate (Ca3Al2O6) is an indispensable component of Portland cement due to its high strength and reactivity. This study investigates the equilibrium lattice structure as well as the electronic and refractory properties of a newly discovered allotrope of Ca3Al2O6 using density functional theory and random phase approximation methods. Using density functional perturbation theory, we investigate the phonon dispersion of the refined structure's experimental stability. In addition, the lattice thermal conductivity and thermoelectric figure of merit are computed by solving the Boltzmann Transport Equation with the modified Debye Callaway model and the Relaxation time Approximation methods. The computed Figure of merit, determined by the carrier concentration, indicates a substantial enhancement of 40 to 100-fold, leading to a superior figure of merit of 0.25 and 0.6 when appropriately doped. As a result, we anticipate that stable allotropes of Ca3Al2O6 in the Pm3̄m phase will be useful as energy-harvesting, convective cooling and infrared radiation shield-based cement materials in the cement and concrete industries., Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., The project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreements No. 964450 (MIRACLE project, www.miracle-concrete.eu) and No 870114 (NRG-STORAGE, https://nrg-storage.eu) from the EU Commission. We also acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2022-137845NB-C22, PID2022-139230NB-I00, TED2021-132074B-C31, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the Diputación Foral de Gipuzkoa (Project No. 2023-CIEN-000077-01). The support of the LTC Green Concrete is also acknowledged. Jorge S. Dolado acknowledge the CESGA supercomputing center for access to computing resorces., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-particle approach to many-body relaxation dynamics

  • Pelc, Marta
  • Dams, David
  • Ghosh, Abhishek
  • Kosik, Miriam
  • Müller, Marvin M.
  • Bryant, Garnett W.
  • Rockstuhl, Carsten
  • Ayuela, Andrés
  • Słowik, Karolina
  • MIRACLE Project ID: 964450
This paper addresses the challenge of modeling relaxation dynamics in quantum many-body systems, specifically focusing on electrons in graphene nanoflakes. While quantum many-body techniques effectively describe dynamics up to a few particles, these approaches become computationally intractable for large systems. Larger systems may be tackled with a single-particle approach that, however, struggles to incorporate relaxation effects. Existing relaxation models encounter issues such as an inability to capture system complexity and violation of the Pauli principle. In this paper, we propose a single-particle model that accounts for various relaxation effects at the crossroads of quantum optics and solid-state photonics, that overcomes the limitations of previous models. Our approach is rooted in the quantum-optical Lindblad model, where relaxation rates are deactivated once the target levels saturate due to the Pauli principle. This approach is referred to as the saturated-Lindblad model. To validate the predictions of the saturated-Lindblad model, we confront them against phenomenological and many-body physics models in low-dimensional systems, including atomic chains and graphene nanoflakes. Remarkably, the saturated-Lindblad model exhibits excellent agreement with few-body calculations, distinguishing itself from other existing approaches. Moreover, by assigning different relaxation rates to different transitions, we successfully reproduce cascade deexcitation dynamics and predict emission spectra. The saturated-Lindblad model offers the ability to describe dynamics in systems of practical sizes, encompassing a wide range of structures that can be effectively captured within the single-particle description., A.G., M.P., and K.S. acknowledge support from the National Science Centre, Poland (Project No. 2020/39/I/ST3/00526). D.D. and C.R. acknowledge support by the German Research Foundation under Grant No. RO 3640/14-1 within Project No. 465163297. M.M.M. and C.R. acknowledge support by the German Research Foundation under Grant No. RO 3640/8-1 within Project No. 378579271. A.A. acknowledges the support of the Spanish Ministry of Science and Innovation through Grants No. PID2019-105488GB-I00 and No. PID2022-139230NB-I00, and No. TED2021-132074B-C32. We acknowledge financial support from the European Commission from projects MIRACLE (Grant No. 964450), NaturSea-PV (Grant No.101084348), and NRG-STORAGE (Grant No. GA 870114). The Basque Government supported this work through Project No. IT-1569-22. A.G., M.P., and K.S. are grateful to the Donostia International Physics Center for their kind hospitality., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal conductivity of Portlandite: Molecular dynamics based approach

  • Sarkar, Prodip Kumar
  • Goracci, Guido
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Energy storage provides a greener path of efficient energy utilization. Recent trends of research suggest concrete as a potential thermal energy storage (TES) material. Its cheap commercial availability makes it one of the most deserving candidates. Cement paste is the key glue of concrete, hence performance of its major components in thermal conduction seeks thorough scientific study. Portlandite or calcium hydroxide is the second major component of cement paste, microscopically visible at a scale length of <10−4 m. Molecular dynamics (MD) simulation has been utilized to investigate the thermal transport mechanism of portlandite at an atomistic scale. The thermal conductivity of this component has been computed using three major force fields which are compared with the experimental outcome using modulated differential scanning calorimetry (MDSC). It has been observed that the simulation outcomes are in order with the experimental value but the results are sensitive to the choice of force fields. Excitation of molecules during thermal transport is predominantly governed by lower-frequency molecular vibration indicating the existence of Boson Peaks. This manuscript presents the full thermal conductivity tensor of portlandite along with the possible mechanism associated with thermal transport., This work was born under the umbrella of the project “Photonic Metaconcrete with Infrared RAdiative Cooling Capacity for Large Energy Savings (MIRACLE)” funded by the EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low density phases of TiO2 by cluster self-assembly

  • Aguilera-Granja, Faustino
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
The interest in titanium dioxide (TiO2) phases is growing due to the number of applications in cosmetics, food industry and photocatalysis, an increase that is driven by its exceptional properties when engineered at the nanoscale like in the form of nanoparticles. Our goal is to discover unknown low-density phases of TiO2, with potential for applications in various fields. We then use well-known TiO2 clusters as fundamental building blocks to be self-assembled into unique structures to study their distinct characteristics. Density functional calculations are employed to relax the structures and identify the most stable TiO2 structures within an energy range of 0.1 eV per atom from the rutile and anatase phases, which are confirmed, validating our methodology. Going beyond conventional phases, we found two-dimensional TiO2 structures, previously explored in separate studies, and showing typical structures of transition metal dichalcogenide layers, that forge a bridge between different TiO2 structures. It is noteworthy that our investigation uncovered an entirely novel class of TiO2 structures featuring hexagonal cages like beehive channels, opening novel phases with huge potential. These discovered low-density phases are interesting, particularly the hexagonal cage structures with remarkable large gaps, because they introduce other dimensions for uncharted applications in the ever-growing TiO2 landscape., We acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2019-105488GB-I00, PCI2019-103657 grant, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the Diputación Foral de Gipuzkoa (Project No. 2023-CIEN-000077-01), the European Commission NRG-STORAGE project (GA 870114), MIRACLE project (GA 964450), and NaturSea-PV (GA 101084348). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials. Computations for this research were conducted on DIPC supercomputer computational resources, and in the IPICYT’S National Supercomputing Center supported this research with the computational time grant TKII-E-0424-I-090424-20/PR-22. Finally, we also acknowledge to José Limón from IF-UASLP for computational support in the calculations., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluating the cradle-to-gate environmental impact and cooling performance of advanced daytime radiative cooling materials to establish a comparative framework for a novel photonic meta-concrete

  • Adams, Nick
  • Carlosena, Laura
  • Allacker, Karen
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., [Background] By the end of 2050, it is expected that 68% of the population will live in urban areas. A higher density of people living in cities generates an increased urban heat island. Radiative cooling (RC) materials are proposed as a key strategy to mitigate global warming and urban heating. The Horizon 2020 project MIRACLE aims at developing a new RC material based on conventional concrete. This paper presents a framework developed for comparing both the cradle-to-gate environmental impact and cooling potential of the newly developed photonic meta-concrete (or any other new RC material) with existing RC materials. The framework is applied to various RC materials using the generic Ecoinvent v3.6 database. The impact assessment method is in line with the Belgian life cycle assessment method for buildings and covers the 15 environmental impact categories of the EN15804:A2. The cooling performance is assessed by implementing the material spectral emissivity into a thermal model for Brussels and Madrid., [Results] The study shows that the sputtering process contributes over 75% to the cradle-to-gate environmental impact of several RC materials, while materials produced without this process, have significantly lower impacts. The assessment of the cooling potential showed that convection heat gains make it difficult to create an all-year round cooling material. The comparison with a conventional building material, a concrete roof tile, hence shows great potential for these RC materials as heating gains during summer are significantly reduced. Analysing cooling performance alongside environmental impact, the study identified two RC materials, i.e. D6 and D10, as the most preferred in both Brussels and Madrid, considering their lower environmental impact and superior performance., [Conclusions] The literature review revealed that a standardised way to assess and benchmark RC materials based on their cradle-to-gate environmental impact and cooling performance is lacking to date. This paper hence presents, for the first time, a method to compare RC materials considering these two characteristics. This method allows to identify the most competitive RC materials, which will serve in our study to benchmark the newly developed photonic meta-concrete., This project has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No. 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoelectric properties of the main species present in Portland cement pastes

  • Agbaoye, Ridwan O.
  • Janovec, Jozef
  • Ayuela, Andrés
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Several experimental studies have been conducted on the thermoelectric properties of cementitious materials, but a detailed inspection of the intrinsic properties of their main ingredients is still missing. This work focuses on the thermoelectric properties of portlandite and tobermorite, two mineral components found in Ordinary Portland Cement pastes. To this end, atomistic simulations were carried out to predict the thermoelectric properties of cement-based materials. The methodology is based on the density functional theory approach together with GW-quasiparticle and Boltzmann transport equation methods. As expected, the undoped minerals have low thermal conductivity. However, both the Seebeck coefficient and the electrical conductivity can be dramatically increased by appropriate carrier doping. In fact, an enhanced figure of merit of Z = 0.6 at 650 K and 0.79 at 600 K is observed for portlandite and tobermorite. Therefore, our results confirm that there are still much promising prospects for enhancing the characteristics of concrete materials for energy harvesting., The project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreements No. 964450 (MIRACLE project, www.miracle-concrete.eu) and No 870114 (NRG-STORAGE, https://nrg-storage.eu) from the EU Commission. We also acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2022-137845NB-C22, PID2022-139230NBI00, TED2021-132074B-C31, and TED2021-132074B-C32), and the Diputación Foral de Gipuzkoa (SAREA/RED3023, Project No. 2023-CIEN-000077-01). The support of the LTC Green Concrete from the Basque Government is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical and excitonic properties of calcite CaCO3

  • Janovec, Jozef
  • Dolado, Jorge S.
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., Calcite has been successfully used as a substrate or coating material in optical devices, but very little is known about its own optical properties. In this study, we present a comprehensive analysis of the optical properties of CaCO3 calcite, a typical representative of metal carbonates, obtained using the density functional theory (DFT), GW, and Bethe–Salpeter equation (BSE) methods. Our findings demonstrate that the onset of the CaCO3 optical spectrum is characterized by bound excitons, with the excitonic wavefunction primarily localized on the CO3 units. We find that calcite exhibits two different types of excitons: a Frenkel-type exciton centered on the CO3 units, leading to a narrow absorption band, and a more delocalized charge-transfer exciton that contributes more significantly to the optical spectra. The excitons exhibit a strong anisotropy with a larger spatial extent in the xy plane, along the layers of the CO3 molecules. Our results provide insight into the electronic structure and reveal the distinctive optical properties of calcite, with further implications for optical applications and the design of nanodevices, where an accurate description of the dielectric properties is required., We acknowledge funding from the Spanish Ministry of Science and Innovation (grants no. PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the Diputación Foral de Gipuzkoa (Project No. 2023-CIEN-000077-01), the European Commission MIRACLE project (GA 964450), and NaturSea-PV (GA 101084348). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials. The authors acknowledge the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (FI-2023-2-0039)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal properties of tricalcium aluminate: Molecular dynamics simulation and experimental approach

  • Sarkar, Prodip Kumar
  • Goracci, Guido
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., The energy sector is making a noticeable effort to migrate towards renewable energy to tackle the global warming effect. At large scale, a concentrated solar plant (CSP) is one of the viable options with limitations of steady heat generation due to the uncertainty of sunlight. Thermal batteries can mitigate the trouble to a large extent. Recently, concrete (artificial rock glued by cement) has become a point of interest for the research community as a cheap, nontoxic option. In this paper, thermo-mechanical properties of tricalcium aluminate (C3 A) have been studied for the first time in the framework of molecular dynamics along with modulated differential scanning calorimetry (MDSC) based experiments. The outcome suggests high-temperature stability of the material with reasonably higher heat capacity and thermal conductivity useful for potential application for thermal battery. Heat transport mechanism at the atomistic level has thoroughly been discussed., This work was born under the umbrella of the project “Photonic Metaconcrete with Infrared RAdiative Cooling Capacity for Large Energy Savings (MIRACLE)” funded by the EU (GA 964450). This research was also carried out under the umbrella of the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/ 501100011033 and co-founded by the European Union (Programaci’on Conjunta Internacional 2019) and the projects MIRACLE (GA 964450) and NRG-STORAGE (GA 870114) funded by the European Commission, . We also acknowledge the Transnational Common Laboratory (LTC) Aquitaine–Euskadi Network in Green Concrete., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reactive molecular dynamics based multiaxial failure analysis of jennite

  • Sarkar, Prodip Kumar
  • Goracci, Guido
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Jennite is one of the key analogs to calcium silicate gel (C-S-H), the main contributor to cement paste’s cohesive strength, which helps in gluing natural aggregates into concrete. The primary role of the glue is to sustain externally applied mechanical loading, preventing the disintegration of concrete. Atomic bonds within the glue are the ultimate receptors of these loads. In this study, the multiaxial failure mechanism of the C-S-H at the nanoscale has been investigated within the framework of molecular dynamics simulation. we have adopted jennite as a simpler representative of C-S-H gel to study the response under uni/multi-axial deformation and the underlying mechanism of failures. The major two mechanisms are the separation of calcium silicate layers and the breakage of covalent silicate chains. The study also presents an ellipsoidal yield surface of failure captured at the molecular scale., This research was also carried out under the umbrella of the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/ 501100011033 and co-founded by the European Union (Programación Conjunta Internacional 2019) and the projects MIRACLE (GA 964450) and NRG-STORAGE (GA 870114) funded by the European Commission . We also acknowledge the Transnational Common Laboratory (LTC) Aquitaine–Euskadi Network in Green Concrete., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards cooling concrete: Evaluation of cement and cement composites under realistic climatic conditions

  • Torres-García, Alicia E.
  • Agbaoye, Ridwan O.
  • Carlosena, Laura
  • Goracci, Guido
  • Lezaun, Carlos
  • Dolado, Jorge S.
  • Beruete, Miguel
  • MIRACLE Project ID: 964450
Finding scalable, cost-effective and environmentally safe solutions for Passive Daytime Radiative Cooling (PDRC) is essential for addressing energy and climate challenges. This study demonstrates the feasibility of achieving PDRC using only cement-based compounds, without the need for additional whitening agents or other additives. Unlike previous approaches that rely on external additives, the proposed solution leverages two fundamental cement phases—portlandite and tobermorite—offering a scalable and low-impact alternative. The research evaluates the radiative cooling potential of these phases, along with two widely used cements—white cement (WC) and ordinary Portland cement (OPC), by analyzing and comparing their homogenized complex permittivities, derived using the Kramers-Kronig (KK) method. Simulations were conducted to assess the cooling power over one year across three different climates using actual meteorological data. The portlandite exhibits positive Pcool, maintaining a temperature equal to or below the ambient temperature more than 90 % of the time in dry desert and warm temperate locations. Indoor controlled measurements results reveal that portlandite (CH) may exhibit temperatures 15 °C lower than OPC and 5 °C lower than WC., The research presented in this paper has been supported by funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 64450 (MIRACLE project, more information available at www.miracle-concrete.eu) from the EU Commission. Additionally, this work has received financial support from the projects TED2021-132074B-C31, TED2021-132074B-C32 and TED2021-132074B-C33, funded by MCIN/AEI/10.13039/501100011033, and the European Union NextGenerationEU/PRTR and from the projects PID2022-137845NB-C21, PID2022-137845NB-C22 funded by MCIN/AEI/10.13039/501100011033/and by FEDER Una manera de hacer Europa., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of photonic properties of a new radiative cooling material on the urban heat island and the radiation balance

  • Adams, Nick
  • Borgers, Ruben
  • Neirynck, Jérôme
  • Wouters, Hendrik
  • Allacker, Karen
  • Lipzig, Nicole van
  • MIRACLE Project ID: 964450
A photonic meta-concrete (PMC), a radiative cooling material based on conventional concrete, is under development. This material reflects solar radiation through its high albedo and emits heat as longwave radiation via the atmospheric window, achieving effective cooling. This study assesses the PMC's impact on the urban heat island (UHI) in Belgian cities using the COSMO-CLM regional climate model with the TERRA_URB urban surface parametrization, simulating a 5-day heatwave across Flanders with 1 km horizontal grid spacing. Additionally, the study estimates radiative forcing from PMC application through a radiation scheme and translates this into CO₂-equivalent emission reduction., The results indicate that PMC reduces the UHI in Brussels, lowering daily surface and nightly 2-m air temperatures by 9.6 °C and 2.7 °C respectively, due to the material high albedo. Scenarios with varying PMC coverage ratios show a non-linear relationship between coverage and temperature reduction, where lower coverage yields smaller cooling effects. Applying PMC to all urban roofs results in a radiative forcing reduction of 69.7 W/m2, equivalent to 22 kt of potential reduced greenhouse gas emissions. Although full PMC coverage on urban rooftops may be challenging, these findings underscore the material's potential for UHI mitigation, offering substantial cooling benefits and greenhouse gas reductions in large-scale applications., This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Impact of radiative cooling on multi-junction solar cell under unconcentrated and low-concentrated light

  • Testa, Pietro
  • Cagnoni, Matteo
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
Trabajo presentado como póster a la IEEE 52nd Photovoltaic Specialist Conference, celebrada en Seattle, Washington (USA) del 9 al 14 de junio de 2024., This project has received funding from the European Union’s Horizon 2020 Research and Innovation Program under grant agreement No. 964450., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Impact of radiative cooling on multi-junction solar cell under unconcentrated and low-concentrated light

  • Testa, Pietro
  • Cagnoni, Matteo
  • Cappelluti, Federica
  • MIRACLE Project ID: 964450
Comunicación presentada a la IEEE 52nd Photovoltaic Specialist Conference, celebrada en Seattle, Washington (USA) del 9 al 14 de junio de 2024., Multi-junction solar cells are a key technology for high efficiency photovoltaics. Since their performance and reliability are strongly influenced by the operating temperature, their effective thermal management is an important concern, especially in concentrating photovoltaics. Radiative cooling is a cost-effective, passive, and scalable solution for thermal management of solar cells. This technique can effectively expel alarge amount of heat by radiating it into outer space through the atmospheric transparency window between 8 and 13 μm. In this work, we analyze the impact of this cooling strategy on multijunction solar cells under different illumination conditions by means of a detailed balance model for the cell/cooler system. We show that the increase in efficiency resulting from reduced operating temperature is more significant for multi-junction architectures in comparison to single-junction ones, because of their more negative temperature coefficient. Furthermore, we explore two viable approaches for successfully utilizing the radiative cooler in low-concentration photovoltaic systems. Thefirst method involves increasing the size of the radiative cooler area, while the second entails combining it with a nonradiative cooling system., This project has received funding from the European Union's Horizon 2020 Research and Innovation Program under grant agreement no. 964450., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Light-induced reorientation transition in an antiferromagnetic semiconductor

  • Fichera, Bryan T.
  • Rodriguez-Vega, Martin
  • Aguilera-del-Toro, Rodrigo Humberto
  • Arruabarrena, Mikel
  • Leonardo, Aritz
  • Ayuela, Andrés
  • Fiete, Gregory A.
  • Gedik, Nuh
Bryan T. Fichera et al., Because of the lack of a net magnetic moment, antiferromagnets possess a unique robustness to external magnetic fields and are thus predicted to play an important role in future magnetic technologies. However, this robustness also makes them quite difficult to control, and the development of novel methods to manipulate these systems with external stimuli is a fundamental goal of antiferromagnetic spintronics. In this work, we report evidence for a metastable reorientation of the order parameter in an antiferromagnetic semiconductor triggered by an ultrafast quench of the equilibrium order via photoexcitation above the band gap. The metastable state forms less than 10 ps after the excitation pulse, and persists for longer than 150 ps before decaying to the ground state via thermal fluctuations. Importantly, this transition cannot be induced thermodynamically, and requires the system to be driven out of equilibrium. Broadly speaking, this phenomenology is ultimately the result of large magnetoelastic coupling in combination with a relatively low symmetry of the magnetic ground state. Since neither of these properties are particularly uncommon in magnetic materials, the observations presented here imply a generic path toward novel device technology enabled by ultrafast dynamics in antiferromagnets., B. T. F., B. L., K. M., Z. S., B. I., T. L., and N. G. acknowledge support from the U.S. Department of Energy, BES DMSE (data taking and analysis), and Gordon and Betty Moore Foundation’s EPiQS Initiative Grant No. GBMF9459 (instrumentation). C. L., E. D., A. L.-P., and J. O. acknowledge support from the Quantum Materials program under the Director, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division, of the U.S. Department of Energy, Contract No. DE-AC02-05CH11231. G. A. F. gratefully acknowledges support from the NSF through the Center for Dynamics and Control of Materials: an NSF MRSEC under DMR-1720595, NSF DMR2114825, and the Alexander von Humboldt Foundation. R. H. A. d. T., M. A., A. L., and A. A. acknowledge support from the Spanish Ministry of Science and Innovation through Grants No. PID2019–105488 GB-I00, No. TED2021-132074B-C32, and No. PID2022-PID2022-139230NB-I00, the European Commission from the MIRACLE (No. 964450), and the Basque Government through Project No. IT-1569-22. B. L. acknowledges support from the Ministry of Science and Technology of China (2023YFA1407400), the National Natural Science Foundation of China (12374063), and the Shanghai Natural Science Fund for Original Exploration Program (23ZR1479900)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

GRANAD - Simulating GRAphene nanoflakes with ADatoms

  • Dams, David
  • Kosik, Miriam
  • Müller, Marvin M.
  • Ghosh, Abhishek
  • Babaze, Antton
  • Szczuczko, Julia
  • Bryant, Garnett W.
  • Ayuela, Andrés
  • Rockstuhl, Carsten
  • Pelc, Marta
  • Słowik, Karolina
  • MIRACLE Project ID: 964450
GRANAD is a program based on the tight-binding approximation to simulate optoelectronic properties of graphene nanoflakes and Su–Schrieffer–Heeger (SSH) chains with possible adatom defects under electromagnetic illumination. Its core feature is the numerical solution of a time-domain master equation for the spin-traced one-particle reduced density matrix. It provides time-resolved evolution of charge distributions, access to induced-field dynamics, and characterization of the plasmonic response. Other computable quantities include energy profiles, electron distribution in real space, and absorption spectra. GRANAD is written in Python and relies on the JAX library for high-performance array computing, just-in-time (JIT) compilation, and differentiability. It is intended to be lightweight, portable, and easy to set up, offering a transparent and efficient way to access the properties of low-dimensional carbon structures from the nanoscale to the mesoscopic regime. GRANAD is open source, with the full code and extensive documentation with usage examples available at https://github.com/GRANADlauncher/granad.git., D.D. and C.R. acknowledge support by the German Research Foundation within the Project (RO 3640/14-1 under project number - 465163297). M.M.M. and C.R. acknowledge support by the German Research Foundation within the Project (RO 3640/8-1 under project number 378579271). A.G., M.P., and K.S. acknowledge support from the National Science Centre, Poland (Project No. 2020/39/I/ST3/00526) and are grateful to the Donostia International Physics Center for their kind hospitality. A.A. and A.B. acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the European Commission MIRACLE project (GA 964450), and NaturSea-PV (GA 101084348); research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of improved thermoelectric and thermal energy storage properties of katoite, the stable hydration product of calcium aluminate cement

  • Agbaoye, Ridwan O.
  • Ayuela, Andrés
  • Dolado, Jorge S.
The use of sustainable cementitious materials as a low-cost thermal energy storage medium and thermoelectric generator is currently gaining attention. However, considerable improvement is required to increase their heat storage density and thermoelectric efficiency. In this research, we design anion and cation doping models that result in the improvement of the thermoelectric properties of katoite (Ca3Al2(OH)12). We use density functional theory and Boltzmann transport theory methodologies to explore katoite's intrinsic and improved thermoelectric properties. With appropriate doping, we predicted the maximum ZT of 0.31 and 0.6 for electron and hole doping, respectively. Our results indicate that sustainable building can be achieved by appropriately doping katoite-based calcium aluminate cement to improve the thermal energy density and thermoelectric efficiency., This research was conducted in the scope of the Transnational Laboratory (LTC) Green Concrete. The project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreements No. 964450 (MIRACLE project, www.miracle-concrete.eu). We acknowledge the grants nos. PID2022-137845NB-C22, PID2022-139230NB-I00, and TED2021-132074B-C31-C32 funded by MICIU/AEI/10.13039/501100011033, by ERDF/EU and the European Union NextGenerationEU/PRTR”, Jorge S. Dolado acknowledge the CESGA supercomputing center for access to computing resources., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling the dielectric spectra of silicon dioxide for passive radiative cooling applications

  • Patt, Antoine
  • Dolado, Jorge S.
Passive radiative cooling (PRC) is a promising strategy for sustainable thermal regulation that relies on materials with tailored infrared emissivity. Silica (SiO2) is a key component in many PRC applications due to its high transparency in the solar spectrum and strong infrared phonon absorption near 9 µm, aligning with the atmospheric transparency window. However, effective integration of silica into advanced PRC systems – such as photonic coatings, aerogels, and composite networks – requires accurate knowledge of its intrinsic dielectric properties. In this work, the complex dielectric function of silica is derived from atomistic simulations, with an emphasis on infrared-active vibrational modes. We optimize a polarizable force field against available experimental data, including vibrational spectra, elastic moduli, and dielectric constants. The resulting force field provides a robust basis for predictive simulations of silica-based nanostructures relevant to PRC applications., This work was supported by the MIRACLE project. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 964450. JSD also acknowledges the grants nos. PID2022-137845NB—C21- and TED2021-132074B-C31 funded by MICIU/AEI/10.13039/501100011033, by ERDF/EU and the European Union NextGenerationEU/PRTR ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical properties of CaO, SiO2, Al2O3 and Fe2O3 cementitious oxides

  • Janovec, Jozef
  • Agbaoye, Ridwan O.
  • Dolado, Jorge S.
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Data will be made available on request., We present a joint study of the optical properties of the relevant cementitious oxides CaO, SiO2, Al2O3, and Fe2O3, aimed at linking crystal structure, electronic properties, and optical response. Density functional theory (DFT) calculations were performed using both GGA and SCAN exchange–correlation functionals. Due to its superior accuracy, the SCAN ground-state was selected for GW and Bethe–Salpeter equation (BSE) calculations, used to correct the electronic structures and band gaps and to include electron–hole interactions. We show that the optical onset in the cement oxides is significantly influenced by the formation of strongly bound excitons. The results demonstrate that advanced methods beyond standard DFT, particularly the BSE approach, are essential for accurate prediction of the optical response of cementitious materials. Our findings provide a framework for understanding light–matter interactions in cement oxides and establish a computational foundation for the design of concrete-based composites with tailored optical and radiative properties. These insights have the potential to guide the development of advanced construction materials for passive energy management applications such as radiative cooling, in line with sustainable and energy-efficient building technologies., The authors acknowledge following projects: the Spanish Ministry of Science and Innovation (grants nos. PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the Diputación Foral de Gipuzkoa (Project No. 2023-CIEN-000077-01), the European Commission MIRACLE project (GA 964450) and NaturSea-PV (GA 101084348), the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (FI-2023-2-0039). Research was conducted in the scope of the Laboratories for Transborder Cooperation (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Modern Roman-Inspired Concrete with Daytime Radiative Cooling Capacity

  • Dolado, Jorge S.
  • Goracci, Guido
  • Moutaoukil, Ghizlane
  • Agbaoye, Ridwan O.
  • Beruete, Miguel
  • Torres-García, Alicia E.
  • Carlosena, Laura
  • Prabhu, Achutha
  • Ibáñez, Jose A.
  • Adams, Nick
  • Lipzig, Nicole van
  • Allacker, Karen
Addressing global warming through the modernization of buildings and urban areas is a major challenge. Passive daytime radiative cooling (PDRC) materials offer potential solutions, but none have effectively replaced concrete's dominant role in urban environments. Here, a Roman-inspired concrete with PDRC capabilities is presented, combining high solar reflectance (≈0.95) and long-wave infrared (LWIR) emittance (≈0.91). It delivers cooling powers over 45 W m- 2 under average solar intensities of 850 W m- 2 without a convection shield. On hot days (above 30°C), it stays 2°C cooler than the surrounding air under solar irradiance up to 985 W m- 2. Simulations predict this concrete can reduce energy use and CO2 emissions by ≈50% in hot regions and lower urban surface temperatures by up to 10°C during heat waves. This breakthrough offers a cheap, scalable and sustainable solution for energy efficiency and climate resilience., This work was supported by the MIRACLE project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 964450. JSD, MB, and KA acknowledge the support of COOLCRETE project. COOLCRETE has received funding from the European Union'sHorizon 2020 research and innovation programme under grant agreement No 101164420. JSD and MB acknowledge the grants nos. PID2022-137845NBC21-C22 and TED2021-132074B C31-C33 funded by MICIU/AEI/ 10.13039/501100011033, by ERDF/EU, and the European Union NextGenerationEU/PRTR. The authors also thank the Quantum Beams & Sustainable Materials group of the Materials Physics Center for the help with the Confocal Raman measurements and discussions. Finally, JSD acknowledges IQE for providing zeolite sampl, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A chessboard-like photothermoelectric cement cell: a new design for scalable and high efficiency solar energy conversion

  • Barzegar, Mohamad
  • Goracci, Guido
  • Martauz, Pavel
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
A scalable, low-cost photothermoelectric (PTE) cell using cementitious blocks in a chessboard-like design with varying solar absorbance achieves up to 1.81 × 106 μJ m−2 and ∼10 mV K−1 Seebeck coefficient—among the highest for PTE materials. This highlights the potential of engineered cement for efficient solar energy harvesting in smart, sustainable infrastructure., This work was supported by the MIRACLE project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 964450. We also acknowledge the grant PID2022-137845NB-C22 funded by MICIU/AEI/10.13039/501100011033, by ERDF/EU and the European Union NextGenerationEU/PRTRReferences., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Size-dependent photonic and radiative properties of CaO, SiO2, Al2O3 and Fe2O3 cementitious oxides

  • Janovec, Jozef
  • Agbaoye, Ridwan O.
  • Dolado, Jorge S.
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Data will be made available on request., The photonic properties of the cement-forming oxides CaO, SiO2, Al2O3, and Fe2O3 are presented in the context of photonic metaconcrete (PMC) and radiative cooling applications. The design of an efficient PMC with novel optical properties is based on the size dependence of the light–matter interaction. We use Mie theory to study the scattering properties, and Hapke model is used to study the emissivity of nano- and microparticles from the infrared (IR) to the ultraviolet and visible (UV–Vis) spectra. The IR and UV–Vis responses of the cement-forming oxides were obtained using the density functional theory and many-body perturbation theory. We model the size-dependent reflectance and emissivity in both air and C-S-H gel-like media. Nanoparticles of the wide band gap insulators CaO, SiO2 and Al2O3 exhibit efficient scattering of UV–Vis light within a radius range of 120–450 nm. Additionally, CaO nanoparticles effectively scatter NIR light, which makes them a promising material for reflecting solar radiation. Our results provide key tips for the engineering of highly reflective and selectively radiating photonic composites., The authors acknowledge following projects: the Spanish Ministry of Science and Innovation (grants nos. PID2022-139230NB-I00, TED2021-132074B-C32, PID2022-137845NB-C22 and TED2021-132074B-C31), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the Departamento de Promoción Económica y Proyectos Estratégicos de la Diputación Foral de Gipuzkoa under Gipuzkoa Quantum 2025 AQUAS (Project No. 2025-QUAN-000041-01), the European Commission MIRACLE project (GA 964450) and NaturSea-PV (GA 101084348), the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (FI-2023-2-0039)., Peer reviewed
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Lithography-free perfect narrowband absorbers using simple layered structures

  • Lezaun Capdevila, Carlos
  • Navajas Hernández, David
  • Liberal Olleta, Íñigo
  • Beruete Díaz, Miguel
Light absorbers are key components for multiple applications ranging from heat and energy management to communications and sensing. This work explores different complex permittivity combinations for material-reflector and material-spacer-reflector configurations, achieving perfect absorption under different permittivity regimes and thicknesses. Using silicon carbide, we discuss polarization and angle dependencies, and the potential of exploiting different permittivity regimes within a device for multi-band absorption. This work helps standardize absorber design and offer insights to engineer perfect absorbers for applications such as thermal emission, absorption, communication and sensing., The project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement 964450, MIRACLE and from project TED2021-132074B-C33, funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR\.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Enhancing the infrared and visible emission properties of calcium silicate hydrate for radiative cooling using metamaterials

  • Lezaun Capdevila, Carlos
  • Dolado, Jorge S.
  • Torres García, Alicia E.
  • Pérez Escudero, José Manuel
  • Liberal Olleta, Íñigo
  • Beruete Díaz, Miguel
Two periodic structures composed of metal cylinders with different orientations are used to improve the solar reflection of calcium silicate hydrate (CSH) while maintaining its atmospheric emission. Interesting effects have been found when the distance between bars is small, suggesting that lattice effects, arising from the interaction between the rods could be leveraged in the design of these metamaterials. The size of the metal bars is selected based on state of the art micro-manufacturing techniques. This study limits its scope to a CSH gel model; i.e. the most important component of cement-based materials. Further research will be undertaken to consider a best description of the dielectric function of concrete., This work has been funded by the research and innovation program Horizon 2020 of the European union. Project MIRACLE, Grant Agreement 964450.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Radiative cooling properties of portlandite and tobermorite: two cementitious minerals of great relevance in concrete science and technology

  • Dolado, Jorge S.
  • Goracci, Guido
  • Arrese-Igor, Silvia
  • Ayuela, Andrés
  • Torres Betancourt, Angie Tatiana
  • Liberal Olleta, Íñigo
  • Beruete Díaz, Miguel
  • Gaitero, Juan J.
  • Cagnoni, Matteo
  • Cappelluti, Federica
Although concrete and cement-based materials are the most engineered materials employed by mankind, their potential for use in daytime radiative cooling applications has yet to be fully explored. Due to its complex structure, which is composed of multiple phases and textural details, fine-tuning of concrete is impossible without first analyzing its most important ingredients. Here, the radiative cooling properties of Portlandite (Ca(OH)2) and Tobermorite (Ca5Si6O16(OH)2·4H2O) are studied due to their crucial relevance in cement and concrete science and technology. Our findings demonstrate that, in contrast to concrete (which is a strong infrared emitter but a poor sun reflector), both Portlandite and Tobermorite exhibit good radiative cooling capabilities. These results provide solid evidence that, with the correct optimization of composition and porosity, concrete can be transformed into a material suitable for daytime radiative cooling., The project has received funding from the European Union\u2019s Horizon 2020 research and innovation program under grant agreement No. 964450 (MIRACLE project (www.miracle-concrete.eu) from the EU Commission).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Multiple absorption regimes in simple lithography-free structures leading to ultrathin slabs

  • Lezaun Capdevila, Carlos
  • Navajas Hernández, David
  • Liberal Olleta, Íñigo
  • Beruete Díaz, Miguel
Electromagnetic absorbers serve as fundamental components for a wide range of applications, encompassing energy and heat management, sensing, and communications. In this study, we explore several complex permittivity combinations for lithography-free material-reflector and material-spacer-reflector configurations that lead to perfect absorption peaks across distinct permittivity regimes and varying thicknesses. We provide an extensive analysis of angle and polarization dependencies, specifically using silicon carbide as an illustrative example. Our findings reveal the potential for harnessing different absorption regimes within a single device, thus enabling the realization of multiband absorption capabilities. Furthermore, we demonstrate perfect absorption linked with extreme values of permittivity, and we find the conditions to get perfect absorption in ultrathin slabs. In addition, we carry out an analysis about the response at oblique incidence, and we identify a particular mode in the negative permittivity region and its hybridization with epsilon-near-zero modes at oblique incidence. This investigation serves as a valuable standardization of absorber design, offering insights to develop perfect absorbers for infrared applications such as thermal emission, communications, and sensing., The research presented in this paper has been supported by funding from the European Union's Horizon 2020 research and innovation program under Grant Agreement No. 964450 (MIRACLE project, more information available in Ref. ) from the EU Commission. Additionally, this work has received financial support from Project No. TED2021-132074B-C33, funded by MCIN/AEI/10.13039/501100011033, and the European Union NextGenerationEU/PRTR and from Project No. PID2022-137845NB-C21, funded by MCIN/AEI/10.13039/501100011033 and by FEDER Una manera de hacer Europa. C.L. acknowledges financial support from Santander Bank and Public University of Navarra under resolution 2659/2021.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Nanoparticle derived suppressed-scattering bands for radiative cooling

  • Lezaun Capdevila, Carlos
  • Pérez Escudero, José Manuel
  • Torres García, Alicia E.
  • Caggiano, Antonio
  • Peralta, Ignacio
  • Dolado, Jorge S.
  • Liberal Olleta, Íñigo
  • Beruete Díaz, Miguel
Light scattering using resonant nanoparticles is crucial for improving sun irradiance reflection in a daytime radiative cooler. Popular nanoparticles in radiative cooling literature are analyzed in terms of scattering performance due to material dispersion. Different scattering properties in the infrared range have been detected while a similar behavior can be achieved in the solar range due to changes in material dispersion. Also, suppressed scattering windows are produced by dispersive nanoparticles, allowing high reflectance while enabling thermal emission selectively. Material dispersion alone produces such scattering windows, thus, given a material, they will always remain in the same region regardless geometry and location of particles. Lastly, calcium silicate hydrate (CSH), the main phase of concrete, is studied as a dispersive host example. These results demonstrate the importance of a co-design between host and nanoparticles dispersion for daytime radiative cooling and that nanoporosities design are a key ingredient that could allow concrete-based daytime radiative coolers., The authors acknowledge financial support from European Union's Horizon 2020 research and innovation program under grant agreement 964450, MIRACLE.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Suppressed-scattering spectral windows for radiative cooling applications

  • Pérez Escudero, José Manuel
  • Torres García, Alicia E.
  • Lezaun Capdevila, Carlos
  • Caggiano, Antonio
  • Peralta, Ignacio
  • Dolado, Jorge S.
  • Beruete Díaz, Miguel
  • Liberal Olleta, Íñigo
The scattering of light by resonant nanoparticles is a key process for enhancing the solar reflectance in daylight radiative cooling. Here, we investigate the impact of material dispersion on the scattering performance of popular nanoparticles for radiative cooling applications. We show that, due to material dispersion, nanoparticles with a qualitatively similar response at visible frequencies exhibit fundamentally different scattering properties at infrared frequencies. It is found that dispersive nanoparticles exhibit suppressed-scattering windows, allowing for selective thermal emission within a highly reflective sample. The existence of suppressed-scattering windows solely depends on material dispersion, and they appear pinned to the same wavelength even in random composite materials and periodic metasurfaces. Finally, we investigate calcium-silicate-hydrate (CSH), the main phase of concrete, as an example of a dispersive host, illustrating that the co-design of nanoparticles and host allows for tuning of the suppressed-scattering windows. Our results indicate that controlled nanoporosities would enable concrete with daylight passive radiative cooling capabilities., The authors acknowledge financial support from European Union’s Horizon 2020 research and innovation program under grant agreement 964450, MIRACLE.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A modern roman-inspired concrete with daytime radiative cooling capacity

  • Dolado, Jorge S.
  • Goracci, Guido
  • Moutaoukil, Ghizlane
  • Agbaoye, Ridwan O.
  • Beruete Díaz, Miguel
  • Torres García, Alicia E.
  • Carlosena Remírez, Laura
  • Prabhu, Achutha
  • Ibáñez, José A.
  • Adams, Nick
  • Lipzig, Nicole van
  • Allacker, Karen
Addressing global warming through the modernization of buildings and urban areas is a major challenge. Passive daytime radiative cooling (PDRC) materials offer potential solutions, but none have effectively replaced concrete's dominant role in urban environments. Here, a Roman-inspired concrete with PDRC capabilities is presented, combining high solar reflectance (≈0.95) and long-wave infrared (LWIR) emittance (≈0.91). It delivers cooling powers over 45 W m−2 under average solar intensities of 850 W m−2 without a convection shield. On hot days (above 30°C), it stays 2°C cooler than the surrounding air under solar irradiance up to 985 W m−2. Simulations predict this concrete can reduce energy use and CO2 emissions by ≈50% in hot regions and lower urban surface temperatures by up to 10°C during heat waves. This breakthrough offers a cheap, scalable and sustainable solution for energy efficiency and climate resilience., This work was supported by the MIRACLE project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 964450. JSD, MB, and KA acknowledge the support of COOLCRETE project. COOLCRETE has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101164420. JSD and MB acknowledge the grants nos. PID2022-137845NBC21-C22 [i.e. PID2022-137845NB-C21 and PID2022-137845NB-C22] and TED2021-132074B C31-C33 [i.e. TED2021-132074B-C31 and TED2021-132074B-C33] funded by MICIU/AEI/ 10.13039/501100011033, by ERDF/EU, and the European Union NextGenerationEU/PRTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Towards cooling concrete: evaluation of cement and cement composites under realistic climatic conditions

  • Torres García, Alicia E.
  • Agbaoye, Ridwan O.
  • Carlosena Remírez, Laura
  • Goracci, Guido
  • Lezaun Capdevila, Carlos
  • Dolado, Jorge S.
  • Beruete Díaz, Miguel
Finding scalable, cost-effective and environmentally safe solutions for Passive Daytime Radiative Cooling (PDRC) is essential for addressing energy and climate challenges. This study demonstrates the feasibility of achieving PDRC using only cement-based compounds, without the need for additional whitening agents or other additives. Unlike previous approaches that rely on external additives, the proposed solution leverages two fundamental cement phases—portlandite and tobermorite—offering a scalable and low-impact alternative. The research evaluates the radiative cooling potential of these phases, along with two widely used cements—white cement (WC) and ordinary Portland cement (OPC), by analyzing and comparing their homogenized complex permittivities, derived using the Kramers-Kronig (KK) method. Simulations were conducted to assess the cooling power over one year across three different climates using actual meteorological data. The portlandite exhibits positive Pcool, maintaining a temperature equal to or below the ambient temperature more than 90 % of the time in dry desert and warm temperate locations. Indoor controlled measurements results reveal that portlandite (CH) may exhibit temperatures 15 °C lower than OPC and 5 °C lower than WC., The research presented in this paper has been supported by funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 64450 (MIRACLE project, more information available at www.miracle-concrete.eu) from the EU Commission. Additionally, this work has received financial support from the projects TED2021-132074B-C31, TED2021-132074B-C32 and TED2021-132074B-C33, funded by MCIN/AEI/10.13039/ 501100011033, and the European Union NextGenerationEU/PRTR and from the projects PID2022-137845NB-C21, PID2022-137845NB-C22 funded by MCIN/AEI/10.13039/501100011033/and by FEDER Una manera de hacer Europa.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Evaluating the cradle-to-gate environmental impact and cooling performance of advanced daytime radiative cooling materials to establish a comparative framework for a novel photonic meta-concrete

  • Adams, Nick
  • Carlosena Remírez, Laura
  • Allacker, Karen
Background By the end of 2050, it is expected that 68% of the population will live in urban areas. A higher density of people living in cities generates an increased urban heat island. Radiative cooling (RC) materials are proposed as a key strategy to mitigate global warming and urban heating. The Horizon 2020 project MIRACLE aims at developing a new RC material based on conventional concrete. This paper presents a framework developed for comparing both the cradle-to-gate environmental impact and cooling potential of the newly developed photonic meta-concrete (or any other new RC material) with existing RC materials. The framework is applied to various RC materials using the generic Ecoinvent v3.6 database. The impact assessment method is in line with the Belgian life cycle assessment method for buildings and covers the 15 environmental impact categories of the EN15804:A2. The cooling performance is assessed by implementing the material spectral emissivity into a thermal model for Brussels and Madrid. Results The study shows that the sputtering process contributes over 75% to the cradle-to-gate environmental impact of several RC materials, while materials produced without this process, have significantly lower impacts. The assessment of the cooling potential showed that convection heat gains make it difficult to create an all-year round cooling material. The comparison with a conventional building material, a concrete roof tile, hence shows great potential for these RC materials as heating gains during summer are significantly reduced. Analysing cooling performance alongside environmental impact, the study identified two RC materials, i.e. D6 and D10, as the most preferred in both Brussels and Madrid, considering their lower environmental impact and superior performance. Conclusions The literature review revealed that a standardised way to assess and benchmark RC materials based on their cradle-to-gate environmental impact and cooling performance is lacking to date. This paper hence presents, for the first time, a method to compare RC materials considering these two characteristics. This method allows to identify the most competitive RC materials, which will serve in our study to benchmark the newly developed photonic meta-concrete., This project has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreement No. 964450.