Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cool concrete incorporating carbonated Periwinkle Shell: a sustainable solution for mitigating urban heat island effects

  • Goracci, Guido
  • Saeed, Ebtisam
  • Ogundiran, Mary B.
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Aymonier, Cyril
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
The urban heat island effect has become a critical issue in urban areas, intensifying heat-related problems and increasing energy consumption. A sustainable cement formulation that combines ordinary Portland cement (OPC) with a carbonated aggregate derived from Periwinkle shell powder for the development of an efficient cool material is presented. Through a carbonation process, the aggregate undergoes a transformation, capturing carbon dioxide (CO2) and converting it into calcite. The resulting cement mixture exhibits high solar reflective properties, making it a potential candidate for cool pavement and roof applications. In this study, the raw materials, including the Periwinkle shell powder, were characterized, and the carbonation process was evaluated to quantify the CO2 capture efficiency. Additionally, a real test of the efficiency of this new cement on a roof demonstrated that the material achieved a significant cooling effect, being 6 °C cooler than that with standard OPC at the peak of solar radiation., The project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement no. 964450 (MIRACLE project). Moreover, this work is part of the project TED2021-132074B–C31, funded by MCIN/AEI/10.13039/501100011033 and the EU “NextGenerationEU”/PRTR. A.I. and A.A. acknowledge the grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR”, as well as the financial support of Eusko Jaurlaritza, code: IT1566-22. MBO acknowledges the financial support from the Women for Africa Foundation (Fundación Mujeres por frica), Marid, Spain for the research visit and is grateful to the Director, Centro de Fsica de Materiales, CSIC-UPV/EHU, San Sebastián, Spain for making available the research facilities for the study. We also thank the LTC Green Concrete and the UPV/EHU for the funding of an E. Saeed PhD grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Refractory and thermoelectric properties of stabilized Tricalcium aluminate allotrope: A first-principles calculation approach

  • Agbaoye, Ridwan O.
  • Ayuela, Andrés
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Tricalcium aluminate (Ca3Al2O6) is an indispensable component of Portland cement due to its high strength and reactivity. This study investigates the equilibrium lattice structure as well as the electronic and refractory properties of a newly discovered allotrope of Ca3Al2O6 using density functional theory and random phase approximation methods. Using density functional perturbation theory, we investigate the phonon dispersion of the refined structure's experimental stability. In addition, the lattice thermal conductivity and thermoelectric figure of merit are computed by solving the Boltzmann Transport Equation with the modified Debye Callaway model and the Relaxation time Approximation methods. The computed Figure of merit, determined by the carrier concentration, indicates a substantial enhancement of 40 to 100-fold, leading to a superior figure of merit of 0.25 and 0.6 when appropriately doped. As a result, we anticipate that stable allotropes of Ca3Al2O6 in the Pm3̄m phase will be useful as energy-harvesting, convective cooling and infrared radiation shield-based cement materials in the cement and concrete industries., Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., The project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreements No. 964450 (MIRACLE project, www.miracle-concrete.eu) and No 870114 (NRG-STORAGE, https://nrg-storage.eu) from the EU Commission. We also acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2022-137845NB-C22, PID2022-139230NB-I00, TED2021-132074B-C31, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the Diputación Foral de Gipuzkoa (Project No. 2023-CIEN-000077-01). The support of the LTC Green Concrete is also acknowledged. Jorge S. Dolado acknowledge the CESGA supercomputing center for access to computing resorces., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoelectric properties of the main species present in Portland cement pastes

  • Agbaoye, Ridwan O.
  • Janovec, Jozef
  • Ayuela, Andrés
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Several experimental studies have been conducted on the thermoelectric properties of cementitious materials, but a detailed inspection of the intrinsic properties of their main ingredients is still missing. This work focuses on the thermoelectric properties of portlandite and tobermorite, two mineral components found in Ordinary Portland Cement pastes. To this end, atomistic simulations were carried out to predict the thermoelectric properties of cement-based materials. The methodology is based on the density functional theory approach together with GW-quasiparticle and Boltzmann transport equation methods. As expected, the undoped minerals have low thermal conductivity. However, both the Seebeck coefficient and the electrical conductivity can be dramatically increased by appropriate carrier doping. In fact, an enhanced figure of merit of Z = 0.6 at 650 K and 0.79 at 600 K is observed for portlandite and tobermorite. Therefore, our results confirm that there are still much promising prospects for enhancing the characteristics of concrete materials for energy harvesting., The project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreements No. 964450 (MIRACLE project, www.miracle-concrete.eu) and No 870114 (NRG-STORAGE, https://nrg-storage.eu) from the EU Commission. We also acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2022-137845NB-C22, PID2022-139230NBI00, TED2021-132074B-C31, and TED2021-132074B-C32), and the Diputación Foral de Gipuzkoa (SAREA/RED3023, Project No. 2023-CIEN-000077-01). The support of the LTC Green Concrete from the Basque Government is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards cooling concrete: Evaluation of cement and cement composites under realistic climatic conditions

  • Torres-García, Alicia E.
  • Agbaoye, Ridwan O.
  • Carlosena, Laura
  • Goracci, Guido
  • Lezaun, Carlos
  • Dolado, Jorge S.
  • Beruete, Miguel
  • MIRACLE Project ID: 964450
Finding scalable, cost-effective and environmentally safe solutions for Passive Daytime Radiative Cooling (PDRC) is essential for addressing energy and climate challenges. This study demonstrates the feasibility of achieving PDRC using only cement-based compounds, without the need for additional whitening agents or other additives. Unlike previous approaches that rely on external additives, the proposed solution leverages two fundamental cement phases—portlandite and tobermorite—offering a scalable and low-impact alternative. The research evaluates the radiative cooling potential of these phases, along with two widely used cements—white cement (WC) and ordinary Portland cement (OPC), by analyzing and comparing their homogenized complex permittivities, derived using the Kramers-Kronig (KK) method. Simulations were conducted to assess the cooling power over one year across three different climates using actual meteorological data. The portlandite exhibits positive Pcool, maintaining a temperature equal to or below the ambient temperature more than 90 % of the time in dry desert and warm temperate locations. Indoor controlled measurements results reveal that portlandite (CH) may exhibit temperatures 15 °C lower than OPC and 5 °C lower than WC., The research presented in this paper has been supported by funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 64450 (MIRACLE project, more information available at www.miracle-concrete.eu) from the EU Commission. Additionally, this work has received financial support from the projects TED2021-132074B-C31, TED2021-132074B-C32 and TED2021-132074B-C33, funded by MCIN/AEI/10.13039/501100011033, and the European Union NextGenerationEU/PRTR and from the projects PID2022-137845NB-C21, PID2022-137845NB-C22 funded by MCIN/AEI/10.13039/501100011033/and by FEDER Una manera de hacer Europa., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reviewing numerical studies on sensible thermal energy storage in cementitious composites: report of the RILEM TC 299-TES

  • Rahjoo, Mohammad
  • Caggiano, Antonio
  • Berardi, Umberto
  • Prabhu, Achutha
  • Dolado, Jorge S.
This review was prepared by members of the working group 2 (Mohammad Rahjoo, Antonio Caggiano, Umberto Berardi, Achutha Prabhu, Jorge S. Dolado) within 299-TES: “Thermal energy storage in cementitious composites” and further reviewed and approved by all members of the 299-TES., Concrete has emerged as a promising solid-based sensible heat storage (SHS) material due to its favorable balance of thermal properties, cost-effectiveness, non-toxicity, and widespread availability. This state-of-the-art review examines the applications of concrete-based SHS across diverse domains, including buildings, concentrated solar power systems, and industrial power generation. It also investigates the thermal properties of concrete relevant for SHS applications and explores the design considerations for concrete SHS systems and reviews the current research landscape and the role of numerical modeling and simulation techniques in optimizing the performance of concrete SHS systems. Various computational methods, such as transient modeling, finite element method (FEM), computational fluid dynamics, and simplified lumped capacitance models, have been employed to analyze and enhance the design of these systems. As research and development continue in this field, several future trends are anticipated., MR and JSD acknowledge the grants TED2021-132074B-C31 and PID2022-137845NB-C22, funded by MICIU/AEI/10.13039/501100011033 and, as appropriate, by ‘ERDF A way of making Europe’, by ‘ERDF/EU’, by the ‘European Union’ or by the ‘European Union NextGenerationEU/PRTR’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of improved thermoelectric and thermal energy storage properties of katoite, the stable hydration product of calcium aluminate cement

  • Agbaoye, Ridwan O.
  • Ayuela, Andrés
  • Dolado, Jorge S.
The use of sustainable cementitious materials as a low-cost thermal energy storage medium and thermoelectric generator is currently gaining attention. However, considerable improvement is required to increase their heat storage density and thermoelectric efficiency. In this research, we design anion and cation doping models that result in the improvement of the thermoelectric properties of katoite (Ca3Al2(OH)12). We use density functional theory and Boltzmann transport theory methodologies to explore katoite's intrinsic and improved thermoelectric properties. With appropriate doping, we predicted the maximum ZT of 0.31 and 0.6 for electron and hole doping, respectively. Our results indicate that sustainable building can be achieved by appropriately doping katoite-based calcium aluminate cement to improve the thermal energy density and thermoelectric efficiency., This research was conducted in the scope of the Transnational Laboratory (LTC) Green Concrete. The project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreements No. 964450 (MIRACLE project, www.miracle-concrete.eu). We acknowledge the grants nos. PID2022-137845NB-C22, PID2022-139230NB-I00, and TED2021-132074B-C31-C32 funded by MICIU/AEI/10.13039/501100011033, by ERDF/EU and the European Union NextGenerationEU/PRTR”, Jorge S. Dolado acknowledge the CESGA supercomputing center for access to computing resources., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling the dielectric spectra of silicon dioxide for passive radiative cooling applications

  • Patt, Antoine
  • Dolado, Jorge S.
Passive radiative cooling (PRC) is a promising strategy for sustainable thermal regulation that relies on materials with tailored infrared emissivity. Silica (SiO2) is a key component in many PRC applications due to its high transparency in the solar spectrum and strong infrared phonon absorption near 9 µm, aligning with the atmospheric transparency window. However, effective integration of silica into advanced PRC systems – such as photonic coatings, aerogels, and composite networks – requires accurate knowledge of its intrinsic dielectric properties. In this work, the complex dielectric function of silica is derived from atomistic simulations, with an emphasis on infrared-active vibrational modes. We optimize a polarizable force field against available experimental data, including vibrational spectra, elastic moduli, and dielectric constants. The resulting force field provides a robust basis for predictive simulations of silica-based nanostructures relevant to PRC applications., This work was supported by the MIRACLE project. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 964450. JSD also acknowledges the grants nos. PID2022-137845NB—C21- and TED2021-132074B-C31 funded by MICIU/AEI/10.13039/501100011033, by ERDF/EU and the European Union NextGenerationEU/PRTR ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Modern Roman-Inspired Concrete with Daytime Radiative Cooling Capacity

  • Dolado, Jorge S.
  • Goracci, Guido
  • Moutaoukil, Ghizlane
  • Agbaoye, Ridwan O.
  • Beruete, Miguel
  • Torres-García, Alicia E.
  • Carlosena, Laura
  • Prabhu, Achutha
  • Ibáñez, Jose A.
  • Adams, Nick
  • Lipzig, Nicole van
  • Allacker, Karen
Addressing global warming through the modernization of buildings and urban areas is a major challenge. Passive daytime radiative cooling (PDRC) materials offer potential solutions, but none have effectively replaced concrete's dominant role in urban environments. Here, a Roman-inspired concrete with PDRC capabilities is presented, combining high solar reflectance (≈0.95) and long-wave infrared (LWIR) emittance (≈0.91). It delivers cooling powers over 45 W m- 2 under average solar intensities of 850 W m- 2 without a convection shield. On hot days (above 30°C), it stays 2°C cooler than the surrounding air under solar irradiance up to 985 W m- 2. Simulations predict this concrete can reduce energy use and CO2 emissions by ≈50% in hot regions and lower urban surface temperatures by up to 10°C during heat waves. This breakthrough offers a cheap, scalable and sustainable solution for energy efficiency and climate resilience., This work was supported by the MIRACLE project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 964450. JSD, MB, and KA acknowledge the support of COOLCRETE project. COOLCRETE has received funding from the European Union'sHorizon 2020 research and innovation programme under grant agreement No 101164420. JSD and MB acknowledge the grants nos. PID2022-137845NBC21-C22 and TED2021-132074B C31-C33 funded by MICIU/AEI/ 10.13039/501100011033, by ERDF/EU, and the European Union NextGenerationEU/PRTR. The authors also thank the Quantum Beams & Sustainable Materials group of the Materials Physics Center for the help with the Confocal Raman measurements and discussions. Finally, JSD acknowledges IQE for providing zeolite sampl, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbonated alkali-activated cementitious material with radiative cooling properties for urban heat mitigation

  • Goracci, Guido
  • Adams, Nick
  • De la Fuente, T.S.N.
  • Iturrospe, Amaia
  • Ibáñez, Jose A.
  • Arbe, Arantxa
  • Allacker, Karen
  • Dolado, Jorge S.
Data will be made available on request., Urban areas generate 70% of global CO2 emissions, with cement production contributing 8% while exacerbating urban heat islands that increase cooling demands. To address these interconnected challenges through cleaner production methodologies, this exploratory study developed carbonated alkali-activated cementitious materials through ambient pressure carbonation of upcycled ground granulated blast furnace slag (GGBS) and calcium hydroxide composites (25–75 wt%). Utilizing a low-energy material pelletization technology, specimens were characterized using XRD, TGA, Raman spectroscopy, and SEM. Radiative cooling performance was evaluated through spectral measurements and field testing in desert conditions. The optimized formulation indicates promising exceptional CO2 sequestration (18.6 wt%) through mineralization. Solar reflectance index reached 90, significantly exceeding conventional white concrete (SRI ≈ 80) and approaching commercial cool materials (SRI ≈ 85–119). Field testing demonstrated 16°C lower surface temperatures compared to ordinary Portland cement under 1000 W/m2 solar irradiance in Almeria’s Desert. Microstructural analysis revealed synergistic carbonation-pozzolanic reactions creating dense matrices with hierarchical pore refinement. This dual-benefit approach simultaneously addresses embodied and operational carbon emissions, offering transformative potential for sustainable urban infrastructure. The material’s exceptional cooling performance rivals specialized systems while capturing substantial atmospheric CO2, representing a paradigm shift toward carbon-negative cleaner materials., This work was supported by the COOLCRETE project, which has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 101164420. We also acknowledge the support from project TED2021-132074B-C31, funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. Additionally, we thank the Transnational Common Laboratory (LTC) Aquitaine–Euskadi Network in Green Concrete for their collaboration. Some of this work was performed at the Raman facility located at the Materials Physics Center, supported by the IKUR 2030 Strategy of the Department of Science, Universities and Innovation of the Basque Government. Finally, x-ray structural characterization was performed at XRD facility of Centro de Física de materiales, supported by the Grant PID2024-157988NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF, EU and Eusko Jaurlaritza, code: IT1566-22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Size-dependent photonic and radiative properties of CaO, SiO2, Al2O3 and Fe2O3 cementitious oxides

  • Janovec, Jozef
  • Agbaoye, Ridwan O.
  • Dolado, Jorge S.
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Data will be made available on request., The photonic properties of the cement-forming oxides CaO, SiO2, Al2O3, and Fe2O3 are presented in the context of photonic metaconcrete (PMC) and radiative cooling applications. The design of an efficient PMC with novel optical properties is based on the size dependence of the light–matter interaction. We use Mie theory to study the scattering properties, and Hapke model is used to study the emissivity of nano- and microparticles from the infrared (IR) to the ultraviolet and visible (UV–Vis) spectra. The IR and UV–Vis responses of the cement-forming oxides were obtained using the density functional theory and many-body perturbation theory. We model the size-dependent reflectance and emissivity in both air and C-S-H gel-like media. Nanoparticles of the wide band gap insulators CaO, SiO2 and Al2O3 exhibit efficient scattering of UV–Vis light within a radius range of 120–450 nm. Additionally, CaO nanoparticles effectively scatter NIR light, which makes them a promising material for reflecting solar radiation. Our results provide key tips for the engineering of highly reflective and selectively radiating photonic composites., The authors acknowledge following projects: the Spanish Ministry of Science and Innovation (grants nos. PID2022-139230NB-I00, TED2021-132074B-C32, PID2022-137845NB-C22 and TED2021-132074B-C31), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the Departamento de Promoción Económica y Proyectos Estratégicos de la Diputación Foral de Gipuzkoa under Gipuzkoa Quantum 2025 AQUAS (Project No. 2025-QUAN-000041-01), the European Commission MIRACLE project (GA 964450) and NaturSea-PV (GA 101084348), the computer resources at MareNostrum and the technical support provided by Barcelona Supercomputing Center (FI-2023-2-0039)., Peer reviewed
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A modern roman-inspired concrete with daytime radiative cooling capacity

  • Dolado, Jorge S.
  • Goracci, Guido
  • Moutaoukil, Ghizlane
  • Agbaoye, Ridwan O.
  • Beruete Díaz, Miguel
  • Torres García, Alicia E.
  • Carlosena Remírez, Laura
  • Prabhu, Achutha
  • Ibáñez, José A.
  • Adams, Nick
  • Lipzig, Nicole van
  • Allacker, Karen
Addressing global warming through the modernization of buildings and urban areas is a major challenge. Passive daytime radiative cooling (PDRC) materials offer potential solutions, but none have effectively replaced concrete's dominant role in urban environments. Here, a Roman-inspired concrete with PDRC capabilities is presented, combining high solar reflectance (≈0.95) and long-wave infrared (LWIR) emittance (≈0.91). It delivers cooling powers over 45 W m−2 under average solar intensities of 850 W m−2 without a convection shield. On hot days (above 30°C), it stays 2°C cooler than the surrounding air under solar irradiance up to 985 W m−2. Simulations predict this concrete can reduce energy use and CO2 emissions by ≈50% in hot regions and lower urban surface temperatures by up to 10°C during heat waves. This breakthrough offers a cheap, scalable and sustainable solution for energy efficiency and climate resilience., This work was supported by the MIRACLE project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 964450. JSD, MB, and KA acknowledge the support of COOLCRETE project. COOLCRETE has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101164420. JSD and MB acknowledge the grants nos. PID2022-137845NBC21-C22 [i.e. PID2022-137845NB-C21 and PID2022-137845NB-C22] and TED2021-132074B C31-C33 [i.e. TED2021-132074B-C31 and TED2021-132074B-C33] funded by MICIU/AEI/ 10.13039/501100011033, by ERDF/EU, and the European Union NextGenerationEU/PRTR.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Towards cooling concrete: evaluation of cement and cement composites under realistic climatic conditions

  • Torres García, Alicia E.
  • Agbaoye, Ridwan O.
  • Carlosena Remírez, Laura
  • Goracci, Guido
  • Lezaun Capdevila, Carlos
  • Dolado, Jorge S.
  • Beruete Díaz, Miguel
Finding scalable, cost-effective and environmentally safe solutions for Passive Daytime Radiative Cooling (PDRC) is essential for addressing energy and climate challenges. This study demonstrates the feasibility of achieving PDRC using only cement-based compounds, without the need for additional whitening agents or other additives. Unlike previous approaches that rely on external additives, the proposed solution leverages two fundamental cement phases—portlandite and tobermorite—offering a scalable and low-impact alternative. The research evaluates the radiative cooling potential of these phases, along with two widely used cements—white cement (WC) and ordinary Portland cement (OPC), by analyzing and comparing their homogenized complex permittivities, derived using the Kramers-Kronig (KK) method. Simulations were conducted to assess the cooling power over one year across three different climates using actual meteorological data. The portlandite exhibits positive Pcool, maintaining a temperature equal to or below the ambient temperature more than 90 % of the time in dry desert and warm temperate locations. Indoor controlled measurements results reveal that portlandite (CH) may exhibit temperatures 15 °C lower than OPC and 5 °C lower than WC., The research presented in this paper has been supported by funding from the European Union's Horizon 2020 research and innovation program under grant agreement No. 64450 (MIRACLE project, more information available at www.miracle-concrete.eu) from the EU Commission. Additionally, this work has received financial support from the projects TED2021-132074B-C31, TED2021-132074B-C32 and TED2021-132074B-C33, funded by MCIN/AEI/10.13039/ 501100011033, and the European Union NextGenerationEU/PRTR and from the projects PID2022-137845NB-C21, PID2022-137845NB-C22 funded by MCIN/AEI/10.13039/501100011033/and by FEDER Una manera de hacer Europa.