Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Study of paraffinic and biobased microencapsulated PCMs with reduced graphene oxide as thermal energy storage elements in cement-based materials for building applications

  • Erkizia, Edurne
  • Strunz, Christina
  • Dauvergne, Jean-Luc
  • Goracci, Guido
  • Peralta, Ignacio
  • Serrano, Ángel
  • Ortega, Amaya
  • Alonso, Beatriz
  • Zanoni, Francesca
  • Düngfelder, Michael
  • Sánchez Dolado, Jorge
  • Gaitero Redondo, Juan José
  • Mankel, Christoph
  • Koenders, Eduardus A.B.
Article published in Journal of Energy Storage Volume 84, Part B, 20 April 2024, 110675, Addition of different types of phase change materials (PCMs) to cement-based materials for thermal energy storage has been broadly investigated in the literature. Many studies have researched the addition of organic PCMs and the thermal performance of the PCM-cement system. However, drawbacks such as leakage and poor thermal conductivity of the PCMs have stimulated studies to improve thermal properties within the PCM-cement system. Among the different solutions, addition of carbonous materials (such as graphite and carbon nanotubes) to improve thermal conductivity of the PCMs have been investigated. In the current work, an innovative system that contains microencapsulated PCMs (MPCMs) and purposely synthesized reduced graphene oxide (rGO) has been designed and assessed. The addition of rGO has two aims. The first one is to speed up the heat storage/release velocity by improving the thermal conductivity of the whole system. The second one is to improve the electrical conductivity of the system in order to actively (by applying voltage) be able to turn on the thermal storage/release feature. Up to the authors' knowledge, this is a novel approach for the development of active PCM-cement based thermal energy storage systems. Furthermore, in the present study, the use of paraffinic PCMs was compared with that of biobased PCMs in order to provide a more sustainable solution to the design of cement-based elements for buildings applications. A comprehensive thermal characterization (heat storage capacity, thermal conductivity and diffusivity) has been carried out as well as microstructural characterization. Moreover, broadband dielectric spectroscopy was used to characterize the electrical conductivity of the novel MPCM-rGO-cement system., All the authors gratefully acknowledge the financial support from the NRG-STORAGE project (870114, 2020-2024, https//nrg-storage.eu/), financed by the European Union H2020 Framework under the LC-EEB-01-2019 call, IA type. J. S. Dolado acknowledges the funds from the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/50110001133 and co-funded by the European Union (Programación Conjunta Internacional 2019). J. S. Dolado, G. Goracci, J. J. Gaitero and E. Erkizia would like to acknowledge the Laboratory for Transborder Cooperation “Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials” (LTC-Green Concrete).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Electrical Conductive Properties of 3D-PrintedConcrete Composite with Carbon Nanofibers

  • Goracci, Guido
  • Salgado, David M.
  • Gaitero Redondo, Juan José
  • Sánchez Dolado, Jorge
Electrical conductive properties in cement-based materials have received attention in recent years due to their key role in many innovative application (i.e., energy harvesting, deicing systems, electromagnetic shielding, and self-health monitoring). In this work, we explore the use 3D printing as an alternative method for the preparation of electrical conductive concretes. With this aim, the conductive performance of cement composites with carbon nanofibers (0, 1, 2.5, and 4 wt%) was explored by means of a combination of thermogravimetric analysis (TGA) and dielectric spectroscopy (DS) and compared with that of specimens prepared with the traditional mold method. The combination of TGA and DS gave us a unique insight into the electrical conductive properties, measuring the specimens’ performance while monitoring the amount in water confined in the porous network. Experimental evidence of an additional contribution to the electrical conductivity due to sample preparation is provided. In particular, in this work, a strong correlation between water molecules in interconnected pores and the σ(ω) values is shown, originating, mainly, from the use of the 3D printing technique., This work was born under the umbrella of the ECRETE project (RTI2018-098554-B-I00) funded by MCIN/AEI/10.13039/501100011033 (Program I+D+i RETOS INVESTIGACIÓN 2018), the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/501100011033 and co-founded by the European Union (Programación Conjunta Internacional 2019) and the project NRG-STORAGE (GA 870114) funded by the European Commission. Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Dimerization Effects and Negative Strain Energy in Silicon Monosulfide Nanotubes

  • Alonso Lanza, Tomás
  • Aguilera Granja, Faustino
  • Ayuela Fernández, Andrés
We report on the construction and characterization of silicon monosulfide nanotubes that were obtained by rolling up two-dimensional materials isoelectronic to phosphorene in the recently discovered layered Pmma and 𝛽 phases. We relaxed and studied the nanotube structures using computational methods within density functional theory (DFT). We found that the nanotubes with a thick Pmma layer remain stable at room temperature, and their electronic properties depend on their diameters. Small-diameter nanotubes display metallic character, while nanotubes with increasing diameter show semiconducting ground states due to the dimerization in the silicon–silicon distances that opens a gap, leading to interesting optical properties in the near-infrared region. Furthermore, we discovered 𝛽 SiS monolayer nanotubes having negative strain energies, similar to the well-known imogolite inorganic nanotubes. The combined thermal stability, compelling optical properties, and diverse applications of these silicon monosulfide nanotubes underscore the demand for novel synthesis methods to fully explore their potential in various fields., This research was funded by the Spanish Ministry of Science and Innovation (grants no. PID2019-105488GB-I00, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the European Commission NRG-STORAGE project (project no. GA 870114), H2020-FET OPEN Project MIRACLE (No. GA 964450), and NaturSea-PV (ID 101084348).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Kaolin Clay-Based Geopolymer for Ionic Thermoelectric Energy Harvesting

  • Goracci, Guido
  • Ogundiran, Mary B.
  • Barzegar, Mohamad
  • Iturrospe Ibarra, Amaia
  • Arbe Méndez, María Aranzazu
  • Sánchez Dolado, Jorge
Geopolymers, a class of sustainable inorganic materials derived from natural and recycled resources, hold promise for various applications, including thermoelectric power generation. This study delves into the thermoelectric properties of Ikere white (IKW)-geopolymer, derived from kaolin clay, by employing rigorous measurements of thermal conductivity, electrical conductivity, and Seebeck coefficient. The investigation elucidates the pivotal role of temperature and ions in shaping the thermoelectric performance of IKW-geopolymer. Electrical conductivity analysis pinpoints ions within the geopolymer’s channels as primary contributors. Beyond a critical temperature, the evaporation of bulk water triggers a transition of charge carriers from one- to three-dimensional motion, resulting in reduced conductivity. The Seebeck coefficient exhibits a range from −182 to 42 μV/K, with its time-dependent profile suggesting that ions potentially drive thermoelectricity in cementitious materials. Notably, a unique transition from n-type to p-type behavior was observed in the geopolymer, opening new avenues for ionic thermoelectric capacitors. These insights advance our understanding of thermoelectric behavior in geopolymers and have the potential to propel the development of novel building materials for energy conversion applications., The authors also acknowledge the support provided by the PoroPCM project (PCI2019-103657), funded by MCIN/AEI/10.13039/501100011033 and cofunded by the European Union through the 2019 International Joint Programming Initiative. Additionally, the authors express gratitude for the funding received from the European Commission for the NRG-STORAGE project (GA 870114). M.B.O. acknowledges the financial support from the Women for Africa Foundation (Fundación Mujeres por África), Marid, Spain, for the research visit and thanks the Director, Centro de Física de Materiales, CSIC-UPV/EHU, San Sebastián, Spain for making available the research facilities for the study. Finally, A.I. and A.A. acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe,” Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR,” as well as financial support of Eusko Jaurlaritza, code: IT1566-22.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Magnetic order and magnetic anisotropy in two-dimensional ilmenenes

  • Aguilera del Toro, Rodrigo Humberto
  • Arruabarrena Larrarte, Mikel
  • Leonardo Liceranzu, Aritz
  • Ayuela Fernández, Andrés
Iron ilmenene is a new two-dimensional material that has recently been exfoliated from the naturally occurring iron titanate found in ilmenite ore, a material that is abundant on the earth's surface. In this work, we theoretically investigate the structural, electronic and magnetic properties of 2D transition- metal-based ilmenene-like titanates. The study of magnetic order reveals that these ilmenenes usually present intrinsic antiferromagnetic coupling between the 3d magnetic metals decorating both sides of the Ti–O layer. Furthermore, the ilmenenes based on late 3d brass metals, such as CuTiO3 and ZnTiO3, become ferromagnetic and spin compensated, respectively. Our calculations which include spin–orbit coupling reveal that the magnetic ilmenenes have large magnetocrystalline anisotropy energies when the 3d shell departs from being either filled or half-filled, with their spin orientation being out-of-plane for elements below half-filling of 3d states and in-plane above. These interesting magnetic properties of ilmenenes make them useful for future spintronic applications because they could be synthesized as already realized in the iron case., This work has been supported by the Spanish Ministry of Science and Innovation through grants PID2019-105488GB-I00, TED2021-132074B-C32 and PCI2019-103657. We acknowledge nancial support by the European Commission from the MIRACLE (ID 964450), NaturSea-PV (ID 101084348), and NRG- STORAGE project (GA 870114). The Basque Government sup- ported this work through Project No. IT-1569-22. M. A. was supported by the Spanish Ministry of Science and Innovation through the FPI PhD Fellowship BES-2017-079677. R. H. A.-T. acknowledges the postdoctoral contract from the Donostia International Physics Center.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Normal and Anomalous Self-Healing Mechanism of Crystalline Calcium Silicate Hydrates

  • Dupuis, Romain
  • Moon, Juhyuk
  • Jeong, Yeonung
  • Taylor, Rae
  • Kang, Sung Hoon
  • Manzano Moro, Hegoi
  • Ayuela Fernández, Andrés
  • Monteiro, Paulo J. M.
  • Sánchez Dolado, Jorge
The origin of different stability of crystalline calcium silicate hydrates was investigated. The tobermorite crystal has been used as an analog of cement hydrate that is being mostly manufactured material on earth. Normal tobermorite is thermally unstable and transforms to amorphous at low pressure. Meanwhile, anomalous tobermorite with high Al content does not significantly transform under high pressure or high temperature. Conducted X-ray absorption spectroscopy explains the weak stability of normal tobermorite which was originally hypothesized by the role of zeolitic Ca ions in the cavities of silicate chains. Atomic simulations reproduced the experimentally observed trend of pressure behavior once the ideal structures were modified to account for the Al content as well as the chain defects. The simulations also suggested that the stability of tobermorite under stress could be rationalized as a self-healing mechanism in which the structural instabilities were accommodated by a global sliding of the CaO layer., J.M. acknowledges support by a grant (20SCIP-C159063-01) from Construction Technology Research Program funded by Ministry of Land, Infrastructure and Transport of Korean government. H.M. acknowledges the financial support from the Gobierno Vasco (project IT912-16). The work in San Sebasti ' an (R.D., J.S.D, A.A) was supported by the Spanish Ministry of Science and Innovation with RTI2018-098554-B-I00, PID2019-105488GB-I00 and PCI2019-103657 research grants, the Gobierno Vasco UPV/EHU (Project No. IT-1246-19), and the European Commission from the NRG-STORAGE project (GA 870114). The Institute of Engineering Research in Seoul National University provided research facilities for this work. The Ca-XAS and HPXRD experiments were performed at XAFCA beamline in Singapore Synchrotron Light Source (SSLS) and 12.2.2 beamline in Advanced Light Source (ALS), respectively. The ALS supported by a DOE Office of Science User Facility under contract no. DE-AC02-05CH11231 and the Consortium for Materials Properties Research in Earth Sciences under NSF Cooperative Agreement EAR 1606856. The authors thank Prof. Simon M. Clark, Dr. Yonghua Du, and Dr. Shibo Xi for helpful discussions and beamline experimental supports.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Interactions between Reduced Graphene Oxide with Monomers of (Calcium) Silicate Hydrates: A First-Principles Study

  • Izadifar, Mohammadreza
  • Sánchez Dolado, Jorge
  • Thissen, Peter
  • Ayuela Fernández, Andrés
Graphene is a two-dimensional material, with exceptional mechanical, electrical, and thermal properties. Graphene-based materials are, therefore, excellent candidates for use in nanocomposites. We investigated reduced graphene oxide (rGO), which is produced easily by oxidizing and exfoliating graphite in calcium silicate hydrate (CSHs) composites, for use in cementitious materials. The density functional theory was used to study the binding of moieties, on the rGO surface (e.g., hydroxyl-OH/rGO and epoxide/rGO groups), to CSH units, such as silicate tetrahedra, calcium ions, and OH groups. The simulations indicate complex interactions between OH/rGO and silicate tetrahedra, involving condensation reactions and selective repairing of the rGO lattice to reform pristine graphene. The condensation reactions even occurred in the presence of calcium ions and hydroxyl groups. In contrast, rGO/CSH interactions remained close to the initial structural models of the epoxy rGO surface. The simulations indicate that specific CSHs, containing rGO with different interfacial topologies, can be manufactured using coatings of either epoxide or hydroxyl groups. The results fill a knowledge gap, by establishing a connection between the chemical compositions of CSH units and rGO, and confirm that a wet chemical method can be used to produce pristine graphene by removing hydroxyl defects from rGO., This research was funded by Karlsruhe House of Young Science (KHYS), and Deutsche Forschungsgemeinschaft (DFG). A.A. and J.S.D. also acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2019-105488GB-I00 and PCI2019-103657 grant), the Gobierno Vasco UPV/EHU (project no. IT-1246-19), and the European Commission NRG-STORAGE project (project no. GA 870114). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Normal and anomalous self-healing mechanism of crystalline calcium silicate hydrates

  • Dupuis, Romain
  • Moon, Juhyuk
  • Jeong, Yeonung
  • Taylor, Rae
  • Kang, Sung-Hoon
  • Manzano, Hegoi
  • Ayuela, Andrés
  • Monteiro, Paulo
  • Dolado, Jorge S.
The origin of different stability of crystalline calcium silicate hydrates was investigated. The tobermorite crystal has been used as an analog of cement hydrate that is being mostly manufactured material on earth. Normal tobermorite is thermally unstable and transforms to amorphous at low pressure. Meanwhile, anomalous tobermorite with high Al content does not significantly transform under high pressure or high temperature. Conducted X-ray absorption spectroscopy explains the weak stability of normal tobermorite which was originally hypothesized by the role of zeolitic Ca ions in the cavities of silicate chains. Atomic simulations reproduced the experimentally observed trend of pressure behavior once the ideal structures were modified to account for the Al content as well as the chain defects. The simulations also suggested that the stability of tobermorite under stress could be rationalized as a self-healing mechanism in which the structural instabilities were accommodated by a global sliding of the CaO layer., J.M. acknowledges support by a grant (20SCIP-C159063-01) from Construction Technology Research Program funded by Ministry of Land, Infrastructure and Transport of Korean government. H.M. acknowledges the financial support from the Gobierno Vasco (project IT912-16). The work in San Sebastián (R.D., J.S.D, A.A) was supported by the Spanish Ministry of Science and Innovation with RTI2018-098554-B-I00, PID2019-105488GB-I00 and PCI2019-103657 research grants, the Gobierno Vasco UPV/EHU (Project No. IT-1246-19), and the European Commission from the NRG-STORAGE project (GA 870114). The Institute of Engineering Research in Seoul National University provided research facilities for this work. The Ca-XAS and HPXRD experiments were performed at XAFCA beamline in Singapore Synchrotron Light Source (SSLS) and 12.2.2 beamline in Advanced Light Source (ALS), respectively. The ALS supported by a DOE Office of Science User Facility under contract no. DE-AC02-05CH11231 and the Consortium for Materials Properties Research in Earth Sciences under NSF Cooperative Agreement EAR 1606856., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From single-particle-like to interaction-mediated plasmonic resonances in graphene nanoantennas

  • Müller, Marvin M.
  • Kosik, Miriam
  • Pelc, Marta
  • Bryant, Garnett W.
  • Ayuela, Andrés
  • Rockstuhl, Carsten
  • Słowik, Karolina
Plasmonic nanostructures attract tremendous attention as they confine electromagnetic fields well below the diffraction limit while simultaneously sustaining extreme local field enhancements. To fully exploit these properties, the identification and classification of resonances in such nanostructures is crucial. Recently, a novel figure of merit for resonance classification has been proposed [Müller et al., J. Phys. Chem. C 124, 24331–24343 (2020)] and its applicability was demonstrated mostly to toy model systems. This novel measure, the energy-based plasmonicity index (EPI), characterizes the nature of resonances in molecular nanostructures. The EPI distinguishes between either a single-particle-like or a plasmonic nature of resonances based on the energy space coherence dynamics of the excitation. To advance the further development of this newly established measure, we present here its exemplary application to characterize the resonances of graphene nanoantennas. In particular, we focus on resonances in a doped nanoantenna. The structure is of interest, as a consideration of the electron dynamics in real space might suggest a plasmonic nature of selected resonances in the low doping limit but our analysis reveals the opposite. We find that in the undoped and moderately doped nanoantenna, the EPI classifies all emerging resonances as predominantly single-particle-like, and only after doping the structure heavily, the EPI observes plasmonic response., M.M.M. acknowledges financial support through the Research Travel Grant by the Karlsruhe House of Young Scientists (KHYS). M.M.M. and C.R. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (Project No. 378579271) within Project RO 3640/8-1 and from the VolkswagenStiftung. M.M.M. is grateful for the support of the Toruń Astrophysics/Physics Summer Program TAPS 2019 and the PROM (Project No. PPI/PRO/2018/1/00016/U/001) by the Polish National Agency for Academic Exchange. M.M.M., M.K., and K.S. acknowledge the hospitality of the Donostia International Physics Center. M.K. acknowledges financial support from the National Science Centre, Poland (Grant No. 2016/23/D/ST2/02064). M.P. and A.A. acknowledge financial support by Project No. PID2019-105488GB-I00 of the Spanish Ministry of Science and Innovation, and the Gobierno Vasco UPV/EHU (Project No. IT1246-19). K.S. acknowledges support from the National Science Centre, Poland (Project No. 2016/23/G/ST3/04045), the European Commission from the NRG-STORAGE project (GA 870114) and H2020-FET OPEN project MIRACLE (GA 964450)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interactions between reduced graphene oxide with monomers of (calcium) silicate hydrates: a first-principles study

  • Izadifar, Mohammadreza
  • Dolado, Jorge S.
  • Thissen, Peter
  • Ayuela, Andrés
Graphene is a two-dimensional material, with exceptional mechanical, electrical, and thermal properties. Graphene-based materials are, therefore, excellent candidates for use in nanocomposites. We investigated reduced graphene oxide (rGO), which is produced easily by oxidizing and exfoliating graphite in calcium silicate hydrate (CSHs) composites, for use in cementitious materials. The density functional theory was used to study the binding of moieties, on the rGO surface (e.g., hydroxyl-OH/rGO and epoxide/rGO groups), to CSH units, such as silicate tetrahedra, calcium ions, and OH groups. The simulations indicate complex interactions between OH/rGO and silicate tetrahedra, involving condensation reactions and selective repairing of the rGO lattice to reform pristine graphene. The condensation reactions even occurred in the presence of calcium ions and hydroxyl groups. In contrast, rGO/CSH interactions remained close to the initial structural models of the epoxy rGO surface. The simulations indicate that specific CSHs, containing rGO with different interfacial topologies, can be manufactured using coatings of either epoxide or hydroxyl groups. The results fill a knowledge gap, by establishing a connection between the chemical compositions of CSH units and rGO, and confirm that a wet chemical method can be used to produce pristine graphene by removing hydroxyl defects from rGO., This research was funded by Karlsruhe House of Young Science (KHYS), and Deutsche Forschungsgemeinschaft (DFG). A.A. and J.S.D. also acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2019-105488GB-I00 and PCI2019-103657 grant), the Gobierno Vasco UPV/EHU (project no. IT-1246-19), and the European Commission NRG-STORAGE project (project no. GA 870114). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modification of the optical properties of molecular chains upon coupling to adatoms

  • Müller, Marvin M.
  • Kosik, Miriam
  • Pelc, Marta
  • Bryant, Garnett W.
  • Ayuela, Andrés
  • Rockstuhl, Carsten
  • Słowik, Karolina
Adsorbed atoms (adatoms) coupled to the matrix of solid state host materials as impurities can significantly modify their properties. Especially in low-dimensional materials, such as one-dimensional organic polymer chains or quasi-one-dimensional graphene nanoribbons, intriguing manipulation of the optical properties, such as the absorption cross section, is possible. The most widely used approach to couple quantum emitters to optical antennas is based on the Purcell effect. This formalism, however, does not comprise charge transfer from the emitter to the antenna, but only spontaneous emission of the quantum emitter into the tailored photonic environment, that is evoked by the antenna. To capture such effects, we present a tight-binding formalism to couple an adatom to a finite Su-Schrieffer-Heeger chain, where the former is treated as a two-level system and the latter acts as an optical antenna. We systematically analyze how the coupling strength and the position of the adatom influence the optical properties of the molecular chains in the model. We take into account charge transfer from the adatom to the chain and vice versa via an intersystem hopping parameter, and also include Coulomb interaction within the chain as well as between the adatom and the chain. We show that coupling the adatom to one of the bulk atoms of the linear chain results in a substantial change in optical properties already for comparatively small coupling strengths. We also find that the position of the adatom crucially determines if and how the optical properties of the chains are altered. Therefore, we identify this adatom-chain hybrid system as a tunable platform for light-matter interaction at the nanoscale., M.M.M. acknowledges financial support through the Research Travel Grant by the Karlsruhe House of Young Scientists (KHYS). M.M.M. and C.R. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (Project No. 378579271) within Project RO 3640/8-1 and from the VolkswagenStiftung. M.K. and K.S. acknowledge the support from the National Science Centre, Poland (Project No. 2016/23/G/ST3/04045). A.A. acknowledges support from the Spanish Ministry of Science and Innovation with Grants No. PID2019-105488GB-I00 and No. PCI2019-103657, the Basque Government through the University of the Basque Country Project No. IT-1246-19, and the European Commission from the NRG-STORAGE Project (No. GA 870114) and H2020-FET OPEN Project MIRACLE (No. GA 964450)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Computational design of a Massive Solar-Thermal Collector enhanced with Phase Change Materials

  • Peralta, Ignacio
  • Fachinotti, Víctor D.
  • Koenders, Eddie A.B.
  • Caggiano, Antonio
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., A cement-based device that can meet, partially or completely, the heating loads of a building by absorbing the solar radiation and converting it into thermal energy can be defined as a Massive Solar-Thermal Collector. The absorbing material for the incoming radiation is made of a cementitious composite, generally concrete, and flowing water inside tubes acts as a heat transfer medium. For an optimized performance, during periods of solar radiation, the device has to efficiently conduct the heat flow from the absorbing surface of the collector and transfer this heat energy to the water. Then, when the radiation is reduced or became null, the device should retain as much as possible the heat energy, reducing the heat that is escaping the collector and consequently the losses to the surrounding environment. In this work, by performing a parametric analysis, different absorbing materials are tested with the objective of finding the best configuration that maximizes the energy efficiency of the collector. Cementitious materials, in combination with Phase Change Materials with distinct melting (and solidification) temperatures, are selected as candidate absorbing materials. The weather variables of an entire year and for two different locations are considered to evaluate the behavior of these devices in opposite climates. After numerical simulations, in where an enthalpy-based finite element formulation is used to solve the physical problem, the obtained results allow to conclude that the inclusion of Phase Change Materials within the absorber material of the collectors, if it is done in a correct way, can improve the energy performance of these devices. In this study, 34 °C and 53 °C are chosen as the most appropriated melting temperatures, which conduct to considerable improvements in the achieved performances, and in both warm and cold climates., The authors gratefully acknowledge the financial support from: - The National Scientific and Technical Research Council (CONICET) of Argentina. - The CONICET through the project “Computational design of functional thermal metamaterials in transient regime taking advantage of phase changes” (PIP 11220200101018CO). - The National Agency for the Promotion of Research, Technological Development and Innovation (AGENCIA) of Argentina through the project “Computational design of metamaterials applied to the development of thermal diodes for building envelopes” (PICT 2020 SERIE A 03765). - The National Technological University (UTN) of Argentina, for Grant PID MAUTNFE0007745. - The Technical University of Darmstadt, for the “Future Talent (Guest Stay)” and “Career Bridging” Grants, both given to the first author of this work. - The NRG-STORAGE project (870114, 2020-2024,https://nrg-storage.eu/), financed by the European Union H2020 Framework under the LC-EEB-01-2019 call, IA type. - The MIRACLE project (964450, 2021-2025,https://miracle-concrete.eu/), financed by the European Union H2020 Framework under the FETOPEN-01-2018-2019-2020 call, RIA type. - The support to networking activities provided by the PoroPCM Project (part of the EIG CONCERT - Japan funding,http:concert-japan.eu/) is also gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Out-of-plane magnetic anisotropy in bulk ilmenite CoTiO3

  • Arruabarrena, Mikel
  • Leonardo, Aritz
  • Rodriguez-Vega, Martin
  • Fiete, Gregory A.
  • Ayuela, Andrés
Structural, electronic, and magnetic properties of bulk ilmenite CoTiO3 are analyzed in the framework of density functional theory, using the generalized gradient approximation and Hubbard-corrected approaches. We find that the G-type antiferromagnetic structure, which consists of antiferromagnetically coupled ferromagnetic ab planes, is the ground state of the system, in agreement with experiments. Furthermore, cobalt titanates present two critical temperatures related to the breaking of the inter- and intralayer magnetic ordering. This would result in the individual planes remaining ferromagnetic even at temperatures above the Néel temperature. When spin-orbit coupling is included in our calculations, we find an out-of-plane magnetic anisotropy, which can be converted to an in-plane anisotropy with a small doping of electrons corresponding to about 2.5% Ti substitution for Co, consistent with experimental expectations. We thus present a disorder-dependent study of the magnetic anisotropy in bulk CoTiO3, which will determine its magnon properties, including topological aspects., We gratefully acknowledge primary funding from the National Science Foundation through the Center for Dynamics and Control of Materials: an NSF MRSEC under Cooperative Agreement No. DMR-1720595, with additional support from NSF Grant No. DMR-1949701 and NSF Grant No. DMR2114825. This work was performed in part at the Aspen Center for Physics, which is supported by National Science Foundation Grant No. PHY-1607611. M.R.-V. was supported by LANL LDRD Program and by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division, Condensed Matter Theory Program. This work has been supported by the Spanish Ministry of Science and Innovation with Grants No. PID2019105488GB-I00 and No. PCI2019-103657. We acknowledge financial support by the European Commission from the NRG-STORAGE project (No.GA870114). The Basque Government supported this work through Project No. IT-1246-19. M.A. was supported by the Spanish Ministry of Science and Innovation through the FPI Ph.D. Fellowship No. BES-2017079677., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrical conductive properties of 3D-printedconcrete composite with carbon nanofibers

  • Goracci, Guido
  • Salgado, David M.
  • Gaitero, Juan J.
  • Dolado, Jorge S.
This article belongs to the Special Issue Nanostructured Materials for Energy Applications., Electrical conductive properties in cement-based materials have received attention in recent years due to their key role in many innovative application (i.e., energy harvesting, deicing systems, electromagnetic shielding, and self-health monitoring). In this work, we explore the use 3D printing as an alternative method for the preparation of electrical conductive concretes. With this aim, the conductive performance of cement composites with carbon nanofibers (0, 1, 2.5, and 4 wt%) was explored by means of a combination of thermogravimetric analysis (TGA) and dielectric spectroscopy (DS) and compared with that of specimens prepared with the traditional mold method. The combination of TGA and DS gave us a unique insight into the electrical conductive properties, measuring the specimens’ performance while monitoring the amount in water confined in the porous network. Experimental evidence of an additional contribution to the electrical conductivity due to sample preparation is provided. In particular, in this work, a strong correlation between water molecules in interconnected pores and the σ(ω) values is shown, originating, mainly, from the use of the 3D printing technique., This work was born under the umbrella of the ECRETE project (RTI2018-098554-B-I00) funded by MCIN/AEI/10.13039/501100011033 (Program I+D+i RETOS INVESTIGACIÓN 2018), the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/501100011033 and co-founded by the European Union (Programación Conjunta Internacional 2019) and the project NRG-STORAGE (GA 870114) funded by the European Commission. Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Localization versus delocalization of d-states within the Ni 2 MnGa Heusler alloy

  • Janovec, Jozef
  • Zelený, Martin
  • Heczko, Oleg
  • Ayuela, Andrés
We present calculations based on density-functional theory with improved exchange-correlation approaches to investigate the electronic structure of Ni2 MnGa magnetic shape memory alloy prototype. We study the effects of hybrid functionals as well as a Hubbard-like correction parameter U on the structural, electronic and magnetic properties of the alloy. We show that the previously successful application of U on Mn should be extended by including U on Ni to describe the d localized electrons more accurately and in better agreement with experiments. The bonding interactions within this intermetallic alloy are analysed including the role of non-transition metal. We found that the strongest and most stabilizing bond is formed between the Ga–Ni pairs due to the delocalized s–s and p–s orbital hybridization. Our findings suggest that minimization of the over-delocalization error introduced by standard semi-local exchange-correlation functionals leads to a better description of the Ni2 MnGa alloy. Furthermore we propose that the experimental total magnetic moment of Ni–Mn–Ga alloys could be increased after carefully selected heat treatment procedures., This work was supported by the Czech Science Foundation, Grant No. 21-06613S, and by the Operational Program Research, Development and Education financed by the European Structural and Investment Funds and the Czech Ministry of Education, Youth and Sports (MEYS CR) (project MATFUN CZ.02.1.01/0.0/0.0/15_003/0000487). J.J. and A.A. acknowledges the Spanish Ministry of Science and Innovation with PID2019-105488GB-I00, TED2021-132074B-C32, and PCI2019-103657, the Basque Government through the University of the Basque Country Project No. IT-1569-22, the European Commission from the NRG-STORAGE Project (No. GA 870114), H2020-FET OPEN Project MIRACLE (No. GA 964450), EUSKAMPUS foundation and the “Green Concrete” Transborder Lab., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revising quantum optical phenomena in adatoms coupled to graphene nanoantennas

  • Kosik, Miriam
  • Müller, Marvin M.
  • Słowik, Karolina
  • Bryant, Garnett W.
  • Ayuela, Andrés
  • Rockstuhl, Carsten
  • Pelc, Marta
Graphene flakes acting as photonic nanoantennas may sustain strong electromagnetic field localization and enhancement. To exploit the field enhancement, quantum emitters such as atoms or molecules should be positioned in such close proximity to the flake that electron tunneling might influence the optical and electronic properties of the system. However, tunneling is usually not considered if the optical coupling mechanism between quantum emitters and nanoantennas is at focus. This work presents a framework for describing the electron dynamics in hybrid systems consisting of graphene nanoflakes coupled both electronically and optically to adatoms and subject to external illumination. Our framework combines the single-particle tight-binding approach with a nonlinear master equation formalism that captures both optical and electronic interactions. We apply the framework to demonstrate the impact of electron tunneling between the adatom and the flake on emblematic quantum optical phenomena: degradation of coherent Rabi oscillations and quenching of Purcell spontaneous emission enhancement in two-level adatoms in proximity of triangular graphene nanoflakes., M.K. acknowledges support from the National Science Centre, Poland (Project No. 2016/23/G/ST3/04045). M.P. and K.S. acknowledge support from the National Science Centre, Poland (Project No. 2020/39/I/ST3/00526). M.M.M. acknowledges financial support through the Research Travel Grant by the Karlsruhe House of Young Scientists (KHYS). M.M.M. and C.R. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (Project No. 378579271) within Project RO 3640/8-1 and from the VolkswagenStiftung. A.A. acknowledges the Spanish Ministry of Science and Innovation with PID2019-105488GB-I00 and PCI2019-103657, the Basque Government through the University of the Basque Country Project No. IT-1246-19, the European Commission from the NRG-STORAGE Project (No. GA 870114) and H2020-FET OPEN Project MIRACLE (No. GA 964450). A.A. carried this study under the Translacional CommonLaboratory (LTC-Green Concrete)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rhombohedral trilayer graphene is more stable than its Bernal counterpart

  • Guerrero-Avilés, Raúl
  • Pelc, Marta
  • Geisenhof, Fabian R.
  • Weitz, R. Thomas
  • Ayuela, Andrés
Stackings in graphene have a pivotal role in properties that could be useful in the future, as seen in the recently found superconductivity of twisted bilayer graphene. Beyond bilayer graphene, the stacking order of multilayer graphene can be rhombohedral, which shows flat bands near the Fermi level that are associated with interesting phenomena, such as tunable conducting surface states that can be expected to exhibit spontaneous quantum Hall effect, surface superconductivity, and even topological order. However, the difficulty in exploring rhombohedral graphenes is that in experiments, the alternating, hexagonal stacking is the most commonly found geometry and has been considered to be the most stable configuration for many years. Here we reexamine this stability issue in line with current ongoing studies in various laboratories. We conducted a detailed investigation of the relative stability of trilayer graphene stackings and showed how delicate this aspect is. These few-layer graphenes appear to have two basic stackings with similar energies. The rhombohedral and Bernal stackings are selected using not only compressions but anisotropic in-plane distortions. Furthermore, switching between stable stackings is more clearly induced by deformations such as shear and breaking of the symmetries between graphene sublattices, which can be accessed during selective synthesis approaches. We seek a guide on how to better control – by preserving and changing – the stackings in multilayer graphene samples., This research was funded by the Spanish Ministry of Science and Innovation (grants no. PID2019-105488GB-I00), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), and the European Commission NRG-STORAGE project (project no. GA 870114) and H2020-FET OPEN Project MIRACLE (No. GA 964450). This research was conducted in the scope of the Transnational Common Laboratory (LTC) “Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dimerization effects and negative strain energy in silicon monosulfide nanotubes

  • Alonso-Lanza, Tomás
  • Aguilera-Granja, Faustino
  • Ayuela, Andrés
This article belongs to the Special Issue Modeling, Simulation and Optimization of Nanomaterials., We report on the construction and characterization of silicon monosulfide nanotubes that were obtained by rolling up two-dimensional materials isoelectronic to phosphorene in the recently discovered layered Pmma and 𝛽 phases. We relaxed and studied the nanotube structures using computational methods within density functional theory (DFT). We found that the nanotubes with a thick Pmma layer remain stable at room temperature, and their electronic properties depend on their diameters. Small-diameter nanotubes display metallic character, while nanotubes with increasing diameter show semiconducting ground states due to the dimerization in the silicon–silicon distances that opens a gap, leading to interesting optical properties in the near-infrared region. Furthermore, we discovered 𝛽 SiS monolayer nanotubes having negative strain energies, similar to the well-known imogolite inorganic nanotubes. The combined thermal stability, compelling optical properties, and diverse applications of these silicon monosulfide nanotubes underscore the demand for novel synthesis methods to fully explore their potential in various fields., This research was funded by the Spanish Ministry of Science and Innovation (grants no. PID2019-105488GB-I00, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the European Commission NRG-STORAGE project (project no. GA 870114), H2020-FET OPEN Project MIRACLE (No. GA 964450), and NaturSea-PV (ID 101084348). This research was conducted in the scope of the Transnational Common Laboratory (LTC) “Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomistic simulations, meso-scale analyses and experimental validation of thermal properties in ordinary Portland cement and geopolymer pastes

  • Caggiano, Antonio
  • Peralta, Ignacio
  • Fachinotti, Víctor D.
  • Goracci, Guido
  • Dolado, Jorge S.
Ordinary Portland Cement (OPC)- and alternative binder-based materials have been widely used in Thermal Energy Storage (TES) applications due to their excellent TES capacities, good mechanical properties and low-cost. In this attempt, this work proposes an upscaling procedure to model the TES properties of two hydrated pastes made of OPC and a Hybrid cement (i.e., an alternative H-Cement binder), the latter employed for a GEOpolymer-based composite (GEO). Firstly, an atomistic approach based on energy minimization and molecular dynamics is employed for modelling the thermal behaviors and heat storage capacities of CSH (calcium silicate hydrate) and NASH (sodium aluminosilicate hydrate) phases, being those the main phases for OPC-based paste and GEO, respectively. Then, an up-scaling optimization procedure and meso-scale FEM homogenization techniques are proposed to link the TES parameters of the atomistic main phases of OPC-based paste and GEO with the homogenized upper meso/macro scale values. To this end, the results of an experimental program on both OPC and GEO pastes have been considered as benchmark to calibrate/validate the numerical tools. Promising simulations at several scales and up-scaling procedures are demonstrated in terms of homogenized temperature-dependent heat capacity and thermal diffusivity, showing a good agreement with the experimental data of the analyzed mixtures., This work has been carried out under the umbrella of the Transborder laboratory LTC Green Concrete (https://greenconcretelab.com). We acknowledge the computing resources of the Donostia International Physics Center (DIPC). We also acknowledge the financial supports of: i) the grant RTI2018-098554-B-I00 of ECRETE project, funded by MCIN/AEI/10.13039/501100011033 and by ”ERDF A way of making Europe”; ii) the grant PCI2019-103657 of POROCM project, funded by MCIN/AEI/10.13039/501100011033 and co-funded by the European Commission; iii) the European Union’s Horizon 2020 research and innovation program under the grant agreement No: 870114; iv) the National Scientific and Technical Research Council (CONICET) of Argentina through the project “Computational design of functional thermal metamaterials in transient regime taking advantage of phase changes” (PIP 11220200101018CO), v) the National Agency for the Promotion of Research, Technological Development and Innovation (AGENCIA) of Argentina through the project “Computational design of metamaterials applied to the development of thermal diodes for building envelopes” (PICT 2020 SERIE A 03765), vi) the National Technological University (UTN) of Argentina, through the grant PID MAUTNFE0007745, and vii) the Technical University of Darmstadt for the “Future Talent (Guest Stay)” and “Career Bridging” Grants, both given to the second author of this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Early-stage analysis of a novel insulation material based on MPCM-doped cementitious foam: Modelling of properties, identification of production process hotspots and exploration of performance trade-offs

  • Zhilyaev, Dmitry
  • Fachinotti, Víctor D.
  • Zanoni, Francesca
  • Ortega, Amaya
  • Goracci, Guido
  • Mankel, Christoph
  • Koenders, Eddie A.B.
  • Jonkers, Henk M.
This study presents an early-stage design exploration of NRG-Foam, an innovative insulation material composed of cementitious foam doped with microencapsulated phase change materials (MPCMs). The study comprises the static part that utilizes life cycle assessment and life cycle costing assessment for getting insight into the impacts of the NRG-Foam production process and the dynamic part that identifies the trade-offs between performance characteristics of NRG-Foam using multi-objective optimization. The production of MPCMs was found to be a major contributor to environmental impacts while the addition of small amounts of reduced graphene oxide amplifies the impacts even further. The hot spot analysis pinpointed high electricity consumption as the main driver of environmental impacts. A multi-objective optimization analysis revealed trade-offs between performance characteristics, emphasizing the necessity of compromises during material development. The selection of the MPCM type was shown to be determinative of the final properties of NRG-Foam., This research was funded by the European Commission NRG-STORAGE project (project no. GA 870114)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Theoretical elastic constants of tobermorite enhanced with reduced graphene oxide through hydroxyl vs epoxy functionalization: A first-principles study

  • Izadifar, Mohammadreza
  • Dolado, Jorge S.
  • Thissen, Peter
  • Ukrainczyk, Neven
  • Koenders, Eddie A.B.
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Graphene-based materials are considered excellent candidates to implement cementitious nanocomposites due to their mechanical properties. This paper presents a comprehensive interface interaction that ends up with computing the elastic properties for four models of the C–S–H gel, taking tobermorite 14 Å as an example, with reduced graphene oxide (rGO) to form reinforced (tobermorite) cementitious nanocomposites within the density functional theory. We found that upon relaxing the model structures, the dissociation of hydroxyl functional groups from the hydroxyl/rGO lattice occurs not only in the presence of Ca2+ ions to compensate for local charges but even when the Ca2+ charges are compensated with hydroxyl groups. In contrast, rGO/CSH interactions remained close to the initial structural models of the epoxy rGO surface. The elastic constants showed high improvements for the cementitious nanocomposite of tobermorite 14 Å with intercalated hydroxyl/rGO layers. Thus, the bulk modulus, shear modulus, Young’s modulus, and Poisson’s ratio increased up to limits set as 165, 128, 134, and 15% compared to tobermorite 14 Å, respectively. In more detail, the specific values of the elastic constants were influenced by the interface, specifically the presence of hydroxyl or epoxy groups as well as how the charges of the Ca2+ ions were compensated. These findings are of interest for the design of future experiments that will help to engineer better rGO/cement composites., This research was fully funded by Karlsruhe House of Young Science (KHYS) and Deutsche Forschungsgemeinschaft (DFG) with the project number of 446266595. A.A. and J.S.D. also acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2019-105488GB-I00, PCI2019-103657 grant, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the European Commission NRG-STORAGE project (GA 870114), MIRACLE project (GA 964450), and NaturSea-PV (GA 101084348). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic order and magnetic anisotropy in two-dimensional ilmenenes

  • Aguilera-del-Toro, Rodrigo Humberto
  • Arruabarrena, Agustín
  • Leonardo, Aritz
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Iron ilmenene is a new two-dimensional material that has recently been exfoliated from the naturally occurring iron titanate found in ilmenite ore, a material that is abundant on the earth's surface. In this work, we theoretically investigate the structural, electronic and magnetic properties of 2D transition-metal-based ilmenene-like titanates. The study of magnetic order reveals that these ilmenenes usually present intrinsic antiferromagnetic coupling between the 3d magnetic metals decorating both sides of the Ti–O layer. Furthermore, the ilmenenes based on late 3d brass metals, such as CuTiO3 and ZnTiO3, become ferromagnetic and spin compensated, respectively. Our calculations which include spin–orbit coupling reveal that the magnetic ilmenenes have large magnetocrystalline anisotropy energies when the 3d shell departs from being either filled or half-filled, with their spin orientation being out-of-plane for elements below half-filling of 3d states and in-plane above. These interesting magnetic properties of ilmenenes make them useful for future spintronic applications because they could be synthesized as already realized in the iron case., This work has been supported by the Spanish Ministry of Science and Innovation through grants PID2019-105488GB-I00, TED2021-132074B-C32 and PCI2019-103657. We acknowledge financial support by the European Commission from the MIRACLE (ID 964450), NaturSea-PV (ID 101084348), and NRG-STORAGE project (GA 870114). The Basque Government supported this work through Project No. IT-1569-22. M. A. was supported by the Spanish Ministry of Science and Innovation through the FPI PhD Fellowship BES-2017-079677. R. H. A.-T. acknowledges the postdoctoral contract from the Donostia International Physics Center., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wigner-Seitz truncated time-dependent density functional theory approach for the calculation of exciton binding energies in solids

  • Arruabarrena, Agustín
  • Leonardo, Aritz
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
Time-dependent density functional theory (TDDFT) has established itself as a computationally efficient and effective alternative to the many-body perturbation theory for calculating the optical properties of solids. Within the framework of linear response formalism, TDDFT exhibits good agreement between optical absorption spectra and experimental data, as well as the possibility of directly determining exciton binding energies. However, the family of exchange-correlation kernels, known as long-range-corrected kernels, which accurately capture excitonic features, face challenges in simultaneously generating visually appealing spectra and precise exciton binding energies. Recently, progress has been made in addressing this discrepancy through a hybrid-TDDFT approach. Our study reveals that the key lies in the numerical treatment of the long-range Coulomb singular term. We conduct a meticulous investigation of the impact of the term in both pure-TDDFT and hybrid approaches using a Wigner-Seitz truncated kernel. Notably, we show that computing this term presents formidable technical difficulties in both approaches, pointing to the need for an improved description of the electron-hole interaction., We acknowledge funding from the Spanish Ministry of Science and Innovation (Grants No. PID2019-105488GB-I00, No. PCI2019-103657, No. PID2022-139230NB-I00, and No. TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (Project No. IT-1569-22), the European Commission NRGSTORAGE Project (GA 870114), MIRACLE Project (GA 964450), and NaturSea-PV (GA 101084348). This research was conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials. Computations for this research were conducted on DIPC supercomputer computational resources. M.A. was supported by the Spanish Ministry of Science and Innovation through the FPI PhD Fellowship BES-2017-079677., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Refractory and thermoelectric properties of stabilized Tricalcium aluminate allotrope: A first-principles calculation approach

  • Agbaoye, Ridwan O.
  • Ayuela, Andrés
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Tricalcium aluminate (Ca3Al2O6) is an indispensable component of Portland cement due to its high strength and reactivity. This study investigates the equilibrium lattice structure as well as the electronic and refractory properties of a newly discovered allotrope of Ca3Al2O6 using density functional theory and random phase approximation methods. Using density functional perturbation theory, we investigate the phonon dispersion of the refined structure's experimental stability. In addition, the lattice thermal conductivity and thermoelectric figure of merit are computed by solving the Boltzmann Transport Equation with the modified Debye Callaway model and the Relaxation time Approximation methods. The computed Figure of merit, determined by the carrier concentration, indicates a substantial enhancement of 40 to 100-fold, leading to a superior figure of merit of 0.25 and 0.6 when appropriately doped. As a result, we anticipate that stable allotropes of Ca3Al2O6 in the Pm3̄m phase will be useful as energy-harvesting, convective cooling and infrared radiation shield-based cement materials in the cement and concrete industries., Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., The project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreements No. 964450 (MIRACLE project, www.miracle-concrete.eu) and No 870114 (NRG-STORAGE, https://nrg-storage.eu) from the EU Commission. We also acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2022-137845NB-C22, PID2022-139230NB-I00, TED2021-132074B-C31, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the Diputación Foral de Gipuzkoa (Project No. 2023-CIEN-000077-01). The support of the LTC Green Concrete is also acknowledged. Jorge S. Dolado acknowledge the CESGA supercomputing center for access to computing resorces., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-particle approach to many-body relaxation dynamics

  • Pelc, Marta
  • Dams, David
  • Ghosh, Abhishek
  • Kosik, Miriam
  • Müller, Marvin M.
  • Bryant, Garnett W.
  • Rockstuhl, Carsten
  • Ayuela, Andrés
  • Słowik, Karolina
  • MIRACLE Project ID: 964450
This paper addresses the challenge of modeling relaxation dynamics in quantum many-body systems, specifically focusing on electrons in graphene nanoflakes. While quantum many-body techniques effectively describe dynamics up to a few particles, these approaches become computationally intractable for large systems. Larger systems may be tackled with a single-particle approach that, however, struggles to incorporate relaxation effects. Existing relaxation models encounter issues such as an inability to capture system complexity and violation of the Pauli principle. In this paper, we propose a single-particle model that accounts for various relaxation effects at the crossroads of quantum optics and solid-state photonics, that overcomes the limitations of previous models. Our approach is rooted in the quantum-optical Lindblad model, where relaxation rates are deactivated once the target levels saturate due to the Pauli principle. This approach is referred to as the saturated-Lindblad model. To validate the predictions of the saturated-Lindblad model, we confront them against phenomenological and many-body physics models in low-dimensional systems, including atomic chains and graphene nanoflakes. Remarkably, the saturated-Lindblad model exhibits excellent agreement with few-body calculations, distinguishing itself from other existing approaches. Moreover, by assigning different relaxation rates to different transitions, we successfully reproduce cascade deexcitation dynamics and predict emission spectra. The saturated-Lindblad model offers the ability to describe dynamics in systems of practical sizes, encompassing a wide range of structures that can be effectively captured within the single-particle description., A.G., M.P., and K.S. acknowledge support from the National Science Centre, Poland (Project No. 2020/39/I/ST3/00526). D.D. and C.R. acknowledge support by the German Research Foundation under Grant No. RO 3640/14-1 within Project No. 465163297. M.M.M. and C.R. acknowledge support by the German Research Foundation under Grant No. RO 3640/8-1 within Project No. 378579271. A.A. acknowledges the support of the Spanish Ministry of Science and Innovation through Grants No. PID2019-105488GB-I00 and No. PID2022-139230NB-I00, and No. TED2021-132074B-C32. We acknowledge financial support from the European Commission from projects MIRACLE (Grant No. 964450), NaturSea-PV (Grant No.101084348), and NRG-STORAGE (Grant No. GA 870114). The Basque Government supported this work through Project No. IT-1569-22. A.G., M.P., and K.S. are grateful to the Donostia International Physics Center for their kind hospitality., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of paraffinic and biobased microencapsulated PCMs with reduced graphene oxide as thermal energy storage elements in cement-based materials for building applications

  • Erkizia, Edurne
  • Strunz, Christina
  • Dauvergne, Jean-Luc
  • Goracci, Guido
  • Peralta, Ignacio
  • Serrano, Ángel
  • Ortega, Amaya
  • Alonso, Beatriz
  • Zanoni, Francesca
  • Düngfelder, Michael
  • Dolado, Jorge S.
  • Gaitero, Juan J.
  • Mankel, Christoph
  • Koenders, Eddie A.B.
Addition of different types of phase change materials (PCMs) to cement-based materials for thermal energy storage has been broadly investigated in the literature. Many studies have researched the addition of organic PCMs and the thermal performance of the PCM-cement system. However, drawbacks such as leakage and poor thermal conductivity of the PCMs have stimulated studies to improve thermal properties within the PCM-cement system. Among the different solutions, addition of carbonous materials (such as graphite and carbon nanotubes) to improve thermal conductivity of the PCMs have been investigated. In the current work, an innovative system that contains microencapsulated PCMs (MPCMs) and purposely synthesized reduced graphene oxide (rGO) has been designed and assessed. The addition of rGO has two aims. The first one is to speed up the heat storage/release velocity by improving the thermal conductivity of the whole system. The second one is to improve the electrical conductivity of the system in order to actively (by applying voltage) be able to turn on the thermal storage/release feature. Up to the authors' knowledge, this is a novel approach for the development of active PCM-cement based thermal energy storage systems. Furthermore, in the present study, the use of paraffinic PCMs was compared with that of biobased PCMs in order to provide a more sustainable solution to the design of cement-based elements for buildings applications. A comprehensive thermal characterization (heat storage capacity, thermal conductivity and diffusivity) has been carried out as well as microstructural characterization. Moreover, broadband dielectric spectroscopy was used to characterize the electrical conductivity of the novel MPCM-rGO-cement system., ll the authors gratefully acknowledge the financial support from the NRG-STORAGE project (870114, 2020-2024, https//nrg-storage.eu/), financed by the European Union H2020 Framework under the LC-EEB-01-2019 call, IA type. J. S. Dolado acknowledges the funds from the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/50110001133 and co-funded by the European Union (Programación Conjunta Internacional 2019). J. S. Dolado, G. Goracci, J. J. Gaitero and E. Erkizia would like to acknowledge the Laboratory for Transborder Cooperation “Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials” (LTC-Green Concrete)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable geopolymer concrete for thermoelectric energy harvesting

  • Barzegar, Mohamad
  • Goracci, Guido
  • Martauz, Pavel
  • Dolado, Jorge S.
Concrete is a widely used material that presents vast opportunities for energy harvesting applications. Among these, thermoelectric concrete shows promising potential for harvesting waste heat generated in urban and industrial environments. However, the development of thermoelectric concrete poses several challenges that need to be addressed, such as the need to accurately account for the intrinsic voltage. This factor is frequently disregarded, but it has a significant impact on the measurement of thermoelectric properties in improving the intrinsically low electrical conductivity and Seebeck coefficient. In this context, this study evaluates the performance of industrially scalable geopolymer-based concrete that incorporates recycled aggregates as low-cost and environmentally friendly additives for thermoelectric energy harvesting applications. The concrete exhibited an intrinsic voltage of 15 mV, and a new test protocol was proposed to exclude its impact on thermoelectric measurements. The geopolymer concrete demonstrated a significantly high Seebeck coefficient of 570 µV/k, surpassing all previously reported values for geopolymer-based materials. Furthermore, it was discovered that the thermoelectric behavior of geopolymer-based concrete is of ionic origin, indicating that further improvements can be made by adjusting the pore solution chemistry. This finding suggests that there is ample opportunity for innovation and optimization in the development of thermoelectric concrete., This work was born under the umbrella of the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/ 501100011033 and co-founded by the European Union (Programación Conjunta Internacional 2019), the project NRG-STORAGE (GA 870114) funded by the European Commission., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low density phases of TiO2 by cluster self-assembly

  • Aguilera-Granja, Faustino
  • Ayuela, Andrés
  • MIRACLE Project ID: 964450
The interest in titanium dioxide (TiO2) phases is growing due to the number of applications in cosmetics, food industry and photocatalysis, an increase that is driven by its exceptional properties when engineered at the nanoscale like in the form of nanoparticles. Our goal is to discover unknown low-density phases of TiO2, with potential for applications in various fields. We then use well-known TiO2 clusters as fundamental building blocks to be self-assembled into unique structures to study their distinct characteristics. Density functional calculations are employed to relax the structures and identify the most stable TiO2 structures within an energy range of 0.1 eV per atom from the rutile and anatase phases, which are confirmed, validating our methodology. Going beyond conventional phases, we found two-dimensional TiO2 structures, previously explored in separate studies, and showing typical structures of transition metal dichalcogenide layers, that forge a bridge between different TiO2 structures. It is noteworthy that our investigation uncovered an entirely novel class of TiO2 structures featuring hexagonal cages like beehive channels, opening novel phases with huge potential. These discovered low-density phases are interesting, particularly the hexagonal cage structures with remarkable large gaps, because they introduce other dimensions for uncharted applications in the ever-growing TiO2 landscape., We acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2019-105488GB-I00, PCI2019-103657 grant, PID2022-139230NB-I00, and TED2021-132074B-C32), the Gobierno Vasco UPV/EHU (project no. IT-1569-22), the Diputación Foral de Gipuzkoa (Project No. 2023-CIEN-000077-01), the European Commission NRG-STORAGE project (GA 870114), MIRACLE project (GA 964450), and NaturSea-PV (GA 101084348). Research conducted in the scope of the Transnational Common Laboratory (LTC) Aquitaine-Euskadi Network in Green Concrete and Cement-based Materials. Computations for this research were conducted on DIPC supercomputer computational resources, and in the IPICYT’S National Supercomputing Center supported this research with the computational time grant TKII-E-0424-I-090424-20/PR-22. Finally, we also acknowledge to José Limón from IF-UASLP for computational support in the calculations., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoelectric properties of the main species present in Portland cement pastes

  • Agbaoye, Ridwan O.
  • Janovec, Jozef
  • Ayuela, Andrés
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Several experimental studies have been conducted on the thermoelectric properties of cementitious materials, but a detailed inspection of the intrinsic properties of their main ingredients is still missing. This work focuses on the thermoelectric properties of portlandite and tobermorite, two mineral components found in Ordinary Portland Cement pastes. To this end, atomistic simulations were carried out to predict the thermoelectric properties of cement-based materials. The methodology is based on the density functional theory approach together with GW-quasiparticle and Boltzmann transport equation methods. As expected, the undoped minerals have low thermal conductivity. However, both the Seebeck coefficient and the electrical conductivity can be dramatically increased by appropriate carrier doping. In fact, an enhanced figure of merit of Z = 0.6 at 650 K and 0.79 at 600 K is observed for portlandite and tobermorite. Therefore, our results confirm that there are still much promising prospects for enhancing the characteristics of concrete materials for energy harvesting., The project has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreements No. 964450 (MIRACLE project, www.miracle-concrete.eu) and No 870114 (NRG-STORAGE, https://nrg-storage.eu) from the EU Commission. We also acknowledge funding from the Spanish Ministry of Science and Innovation (grants nos. PID2022-137845NB-C22, PID2022-139230NBI00, TED2021-132074B-C31, and TED2021-132074B-C32), and the Diputación Foral de Gipuzkoa (SAREA/RED3023, Project No. 2023-CIEN-000077-01). The support of the LTC Green Concrete from the Basque Government is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal properties of tricalcium aluminate: Molecular dynamics simulation and experimental approach

  • Sarkar, Prodip Kumar
  • Goracci, Guido
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Research conducted in the framework of MIRACLE Project (Photonic Metaconcrete with Infrared RAdiative Cooling capacity for Large Energy savings, GA 964450), coordinated by Dr. Jorge Sánchez Dolado, from Centro de Física de Materiales (CFM)., The energy sector is making a noticeable effort to migrate towards renewable energy to tackle the global warming effect. At large scale, a concentrated solar plant (CSP) is one of the viable options with limitations of steady heat generation due to the uncertainty of sunlight. Thermal batteries can mitigate the trouble to a large extent. Recently, concrete (artificial rock glued by cement) has become a point of interest for the research community as a cheap, nontoxic option. In this paper, thermo-mechanical properties of tricalcium aluminate (C3 A) have been studied for the first time in the framework of molecular dynamics along with modulated differential scanning calorimetry (MDSC) based experiments. The outcome suggests high-temperature stability of the material with reasonably higher heat capacity and thermal conductivity useful for potential application for thermal battery. Heat transport mechanism at the atomistic level has thoroughly been discussed., This work was born under the umbrella of the project “Photonic Metaconcrete with Infrared RAdiative Cooling Capacity for Large Energy Savings (MIRACLE)” funded by the EU (GA 964450). This research was also carried out under the umbrella of the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/ 501100011033 and co-founded by the European Union (Programaci’on Conjunta Internacional 2019) and the projects MIRACLE (GA 964450) and NRG-STORAGE (GA 870114) funded by the European Commission, . We also acknowledge the Transnational Common Laboratory (LTC) Aquitaine–Euskadi Network in Green Concrete., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reactive molecular dynamics based multiaxial failure analysis of jennite

  • Sarkar, Prodip Kumar
  • Goracci, Guido
  • Dolado, Jorge S.
  • MIRACLE Project ID: 964450
Jennite is one of the key analogs to calcium silicate gel (C-S-H), the main contributor to cement paste’s cohesive strength, which helps in gluing natural aggregates into concrete. The primary role of the glue is to sustain externally applied mechanical loading, preventing the disintegration of concrete. Atomic bonds within the glue are the ultimate receptors of these loads. In this study, the multiaxial failure mechanism of the C-S-H at the nanoscale has been investigated within the framework of molecular dynamics simulation. we have adopted jennite as a simpler representative of C-S-H gel to study the response under uni/multi-axial deformation and the underlying mechanism of failures. The major two mechanisms are the separation of calcium silicate layers and the breakage of covalent silicate chains. The study also presents an ellipsoidal yield surface of failure captured at the molecular scale., This research was also carried out under the umbrella of the project PoroPCM (PCI2019-103657) funded by MCIN/AEI/10.13039/ 501100011033 and co-founded by the European Union (Programación Conjunta Internacional 2019) and the projects MIRACLE (GA 964450) and NRG-STORAGE (GA 870114) funded by the European Commission . We also acknowledge the Transnational Common Laboratory (LTC) Aquitaine–Euskadi Network in Green Concrete., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kaolin clay-based geopolymer for ionic thermoelectric energy harvesting

  • Goracci, Guido
  • Ogundiran, Mary B.
  • Barzegar, Mohamad
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Dolado, Jorge S.
Geopolymers, a class of sustainable inorganic materials derived from natural and recycled resources, hold promise for various applications, including thermoelectric power generation. This study delves into the thermoelectric properties of Ikere white (IKW)-geopolymer, derived from kaolin clay, by employing rigorous measurements of thermal conductivity, electrical conductivity, and Seebeck coefficient. The investigation elucidates the pivotal role of temperature and ions in shaping the thermoelectric performance of IKW-geopolymer. Electrical conductivity analysis pinpoints ions within the geopolymer’s channels as primary contributors. Beyond a critical temperature, the evaporation of bulk water triggers a transition of charge carriers from one- to three-dimensional motion, resulting in reduced conductivity. The Seebeck coefficient exhibits a range from −182 to 42 μV/K, with its time-dependent profile suggesting that ions potentially drive thermoelectricity in cementitious materials. Notably, a unique transition from n-type to p-type behavior was observed in the geopolymer, opening new avenues for ionic thermoelectric capacitors. These insights advance our understanding of thermoelectric behavior in geopolymers and have the potential to propel the development of novel building materials for energy conversion applications., The authors also acknowledge the support provided by the PoroPCM project (PCI2019-103657), funded by MCIN/AEI/10.13039/501100011033 and cofunded by the European Union through the 2019 International Joint Programming Initiative. Additionally, the authors express gratitude for the funding received from the European Commission for the NRG-STORAGE project (GA 870114). M.B.O. acknowledges the financial support from the Women for Africa Foundation (Fundación Mujeres por África), Marid, Spain, for the research visit and thanks the Director, Centro de Física de Materiales, CSIC-UPV/EHU, San Sebastián, Spain for making available the research facilities for the study. Finally, A.I. and A.A. acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe,” Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR,” as well as financial support of Eusko Jaurlaritza, code: IT1566-22., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Energy-resolved imaging and tomography with compact neutron systems—application to novel construction materials for thermal-energy storage

  • Macia-Castello, Cristina
  • Blanco-Lopez, Daniel
  • Gaboardi, Mattia
  • Koenders, Edduardus
  • Dolado, Jorge S.
  • Wakabayashi, Yasuo
  • Fukuchi, Tomonori
  • Ikeda, Yujiro
  • Otake, Yoshie
  • Fernández-Alonso, Félix
Data generated or analyzed during this study are available from the corresponding author upon reasonable request., Herein, we have used so-called Compact Accelerator-driven Neutron Systems (CANS) to explore the properties and performance of composite cement foams for thermal-energy storage. To this end, energy-resolved neutron imaging and tomography were implemented on RIKEN RANS-I, and these data were complemented by thermal conductivity measurements. The ability to pulse this CANS down to tens of microseconds enables data collection across the available neutron energy spectrum for different foam formulations. With relatively modest L/D ratios of ∼35, it is possible to attain a spatial resolution in the millimeter range, and useful images can be collected in as little time as 3 min. Volume reconstruction was performed via angular scans from 0° to 180° in 10° steps, corresponding to a total of 19 images collected over a period of less than an hour. Key to the above has been the deployment of recently developed algorithms and techniques for the analysis of sparse data. On the basis of these results, the existing capabilities of RIKEN RANS-I and similar CANS provide us with new, nonintrusive, and quantitative measures of key performance parameters, including the degree of porosity over relevant length scales typical in these construction materials. In combination with thermal-conductivity data, these results also enable an assessment of insulating performance, with a view to its further optimization., Financial support for this work has been secured through Grants PID2020-114506GB-I00 (funded by MCIN/AEI/10.13039/501100011033); TED2021-129457B-I00 (funded by MCIN/AEI/10.13039/501100011033 and European Union NextGeneration EU/PRTR); PID2023-146442NB-I00 (funded by MCIU); NRG-STORAGE (European Union, grant agreement 870114); and the IKUR Strategy under the collaboration agreement between Ikerbasque Foundation and the Materials Physics Center, on behalf of the Department of Science, Universities & Innovation of the Basque Government., Peer reviewed