Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Structural characterization by scattering and spectroscopic methods and biological evaluation of polymeric micelles of poloxamines and TPGS as nanocarriers for miltefosine delivery

  • Puig-Rigall, Joan
  • Fernandez-Rubio, Celia
  • González Benito, Francisco Javier
  • Houston, Judith E.
  • Radulescu, Aurel
  • Nguewa, Paul
  • González Gaitano, Gustavo
Miltefosine (MF), an alkylphospholipid originally developed for breast cancer treatment, is a highly active drug for the treatment against leishmaniasis, a neglected tropical disease considered the world’s second leading cause of death by a parasitic agent after malaria. MF exhibits dose-limiting gastrointestinal side effects in patients and its penetration through lipophilic barriers is reduced. In this work we propose a reformulation of MF by incorporating the drug to poly(ethylene)oxide (PEO)-based polymeric micelles, specifically, D-α-tocopheryl polyethylene glycol succinate (TPGS) and Tetronic block copolymers (T904 and T1107). A full structural characterization of the aggregates has been carried out by SANS (small-angle neutron scattering) and dynamic light scattering (DLS), in combination with proton 1D and 2D nuclear magnetic resonance (NMR) spectroscopy, to determine the precise location of the drug. The structure of MF micelles has been characterized as a function of the temperature and concentration. In the presence of the block-copolymers, MF forms mixed micelles in a wide range of temperatures, TPGS being the co-surfactant that incorporates more MF unimers. The hydrophobic tail of MF and those of the block copolymers are in close contact within the micelles, which present a core-shell structure with a hydrophilic corona formed by the PEG blocks of the TPGS and the zwitterion head group of the MF. In order to identify the best carrier, the antileishmanicidal activity of MF in the different formulations has been tested on macrophages, promastigotes and intracellular amastigotes. The combination of the three vehicles with MF makes the formulated drug more active than MF alone against L. major promastigotes, however, only the combination with T904 increases the MF activity against intracellular amastigotes. With the aim of exploring gel-based formulations of the drug, the combination of MF and T1107 under gelation conditions has also been investigated., The authors gratefully acknowledge the financial support provided by MINECO (Project MAT2014-59116-C2), Obra Social La Caixa (LCF/PR/PR13/11080005), University Carlos III Strategic Action in Composites materials and interphases 2011/00287/002, Fundación Caja Navarra, Gobierno de Navarra-Salud (12/2017), Fundación Roviralta, Ubesol, Government of Navarre, Laser Ebro, Inversiones Garcilaso de la Vega and COST actions CA18217 and CA18218. JCNS is acknowledged for the access to the KWS-2 diffractometer at the Heinz Maier-Leibnitz Zentrum (MLZ), Garching, Germany. J.P-R. also acknowledges the Asociación de Amigos de la Universidad de Navarra for his doctoral grant. This work benefited from the use of the SasView application, originally developed under NSF award DMR-0520547. Sasview contains code developed with funding from the European Union's Horizon 2020 research and innovation program under the SINE2020 project, grant agreement No 654000.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

New processing routes for Zr-based ODS ferritic steels

  • Oñoro Salaices, Moisés
  • Salas Colera, Eduardo
  • Parnell, Steven R.
  • Diaconesu, V. Martin
  • Venero, D. Alba
  • Leguey Galán, Teresa
  • Castro Bernal, María Vanessa de
  • Auger, María A.
In this work, Zr addition is proposed to refine the nanoparticle dispersion in an ODS RAF steel of composition Fe-14Cr-2W-0.3Zr-0.24Y (wt. %). Three batches of material are obtained using pre-alloyed atomized powder, where yttrium is directly introduced in the melt, and manufactured through three different processing routes. First route is based on the newly developed STARS route that aims to avoid subsequent mechanical alloying. The second route explores the impact of mechanical alloying in pre-oxidized powders. The third route uses mechanically alloyed powders without the pre-oxidation process. The ODS-powders were individually consolidated by hot isostatic pressing and later hot rolled. The obtained materials were characterized by small-angle neutron scattering (SANS) and X-ray absorption spectroscopy (XAS) techniques. SANS and XAS analysis point out the absence of oxide nanoparticles in the material based on the STAR route. SANS analysis confirms that the mechanically alloyed materials do exhibit the presence of nanoparticles. These are identified as Zr-O-rich nanoprecipitates by XAS and the calculated A-ratio by SANS is linked with the phase Y2Zr2O7. Their radii are in the range of 3 to 3.6 nm. XAS results show that mechanical alloying minimizes the initial differences regarding the oxidation state between the ODS powders with and without pre-oxidation., Funding from AEI (Agencia Estatal de Investigación) with reference AEI/10.13039/501100011033 (project PID2019-105325RB-C33); Comunidad de Madrid (Spain) through the programs Talento-CAM (2017-T1/IND-5439 and 2021-5A/IND-20954), Technofusion (III) CM (S2018/EMT-4437) and multiannual agreements with UC3M (“Excelencia para el Profesorado Universitario”-EPUC3M14 and “Fostering Young Doctors Research” NANOSOLREC programs); and the V PRICIT (Research and Technological Innovation Regional Program) is gratefully acknowledged. Funding for APC was partially granted by Universidad Carlos III de Madrid (Agreement CRUE-Madroño 2024). Prof. Dr. Ir. J. Sietsma is acknowledged for providing constructive comments to this work. This work benefited from the use of the SasView application, originally developed under NSF award DMR-0520547. SasView also contains code developed with funding from the European Union’s Horizon 2020 research and innovation programme under the SINE2020 project, grant agreement No 654000. Authors thanks ALBA-CLAESS staff for providing support during experiment ID: 2021095333.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Fabrication and characterization of PEEK/PEI multilayer composites

  • Alvaredo Atienza, Ángel
  • Chen, Lu
  • San Miguel Arnanz, Verónica
  • Ridruejo, Álvaro
  • Fernández Blázquez, Juan Pedro
Polyetheretherketone (PEEK)/polyetherimide (PEI) blends (50/50, v/v) keeping the crystal phase of PEEK have been manufactured by alternate PEEK/PEI layer stacking. This strategy avoided the complete miscibility of both polymers, keeping layers of PEEK and PEI unmixed along the sample thickness, as well as promoting the formation of a smooth interfacial layer where PEEK and PEI were mixed. The properties of this interface after processing at molten state and different times was studied by DSC, DMA, and X-Ray synchrotron. These techniques allowed monitoring the evolution of glass transition, where isolated Tg’s for both pristine polymers were observed even after long processing time. PEEK crystallinity slightly decreased during manufacturing, whereas PEEK crystal parameters did not vary. These observations show that, although the interface—the zone where both polymers are mixed—grew, layers with pristine polymers remained even after prolonged processing time. The preservation of the PEEK crystallinity was also observed in the mechanical properties of the multilayer PEEK/PEI films, which were compared with pristine PEEK and PEI films. Multilayer samples processed for shorter times rendered higher young modulus, tensile strength, and strain at break., Ángel Alvaredo-Atienza gratefully acknowledges the Community of Madrid for financial support through the framework ‘Sistema Nacional de Garantía Juvenil’ fomented by the European Social Fund and the Youth Employment Initiative. SAXS/WAXS experiments were funded by the Diamond Light Source Synchrotron, (grant number SM20494). This work benefited from the use of the SasView application, originally developed under NSF award DMR-0520547. SasView contains code developed with funding from the European Union’s Horizon 2020 research and innovation programme under the SINE2020 project, grant agreement No 654000.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Secondary phases characterization by SANS and XAS of an ODS ferritic steel after thermal aging at 873K

  • Oñoro Salaices, Moisés
  • Parnell, Steven R.
  • Salas Colera, Eduardo
  • Venero, D. Alba
  • Diaconesu, V. Martin
  • Leguey Galán, Teresa
  • Castro Bernal, María Vanessa de
  • Auger, María A.
An ODS steel with nominal composition Fe-14Cr-2W-0.4Ti-0.3Y2O3 (wt.%) was produced by mechanical alloying and compacted by hot isostatic pressing (HIP) followed by hot cross rolling (HCR). To check the effects of thermal aging at relevant temperatures of operation in fusion power plants, the alloy was thermally aged at 873 K for 2000 h. In this work, small-angle neutron scattering (SANS) and X-ray absorption spectroscopy (XAS) techniques are used for the advanced characterization of secondary phases and the oxide nanoparticle dispersion. SANS results show that the oxide nanoparticles remain stable after the thermal aging treatment. Composition of the oxide nanoparticles was identified as Y2TiO5 or Y2Ti2O7 by SANS, while non-stoichiometry was found by XAS analysis. Laves phase precipitation after the thermal aging treatment is further confirmed by SANS, from the magnetic anisotropic contribution to the scattering intensity associated to this metallic phase, and by XANES., Acknowledgements Funding from AEI (Agencia Estatal de Investigación) with reference AEI/10.13039/501100011033 (project PID2019-105325RB-C33); Comunidad de Madrid (Spain) through the programs Talento-CAM (2017-T1/IND-5439 and 2021-5A/IND-20954), Technofusion (III) CM (S2018/EMT-4437) and multiannual agreements with UC3M (Excelencia para el Profesorado Universitario - EPUC3M14 and Fostering Young Doctors Research's NANOSOLREC programs); and the V PRICIT (Research and Technological Innovation Regional Program) is gratefully acknowledged. Funding for APC was granted by Universidad Carlos III de Madrid (Agreement CRUE-Madroño 2024). Prof. Dr. Ir. J. Sietsma is acknowledged for providing constructive comments to this work. This work benefited from the use of the SasView application, originally developed under NSF award DMR-0520547. SasView also contains code developed with funding from the European Union's Horizon 2020 research and innovation programme under the SINE2020 project, grant agreement No 654000. Authors thank ALBA-CLAESS staff for providing support during experiment ID: 2021095333.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Grape pomace and quercetin: a synergistic approach using PG-PEVs for Psoriasis treatment

  • Perra, Matteo
  • Rached, Rita Abi
  • Fancello, Laura
  • Nácher, Amparo
  • Diez-Sales, Octavio
  • Ruiz-Sauri, Amparo
  • Duque-Soto, Carmen
  • Lozano-Sanchez, Jesus
  • Escobedo-Lucea, Carmen
  • Matricardi, Pietro
  • Del Giudice, Alessandra
  • Castangia, Ines
  • Manconi, Maria
  • Manca, Maria Letizia
[EN] Psoriasis is a chronic inflammatory skin disorder that affects millions worldwide and poses significant therapeutic challenges due to the adverse effects of conventional treatments. In this study we explored a sustainable approach based on Cannonau grape pomace extract, a winemaking sidestream rich in antioxidant polyphenols, combined with quercetin, to develop effective treatments for psoriasis. The extract was obtained using an eco-friendly extraction process and incorporated into phospholipid vesicles containing propylene glycol (PG-PEVs), which exhibited favourable physicochemical features: small size (similar to 77-172nm), homogeneously dispersed (PDI similar to 0.29), highly negative zeta potential (similar to- 45 mV), high entrapment efficiency (>= 82 %), and long-term stability over 18 months. Biological evaluations revealed the high biocompatibility of the formulations (>= 80 %), and their ability to protect keratinocytes from oxidative stress and hyperproliferation, hallmarks of psoriasis.; In a psoriasis-like murine model, PG-PEVs significantly reduced inflammation, neutrophil infiltration, and epidermal hyperplasia, as confirmed by decreased MPO levels (from similar to 353 to similar to 179 ng/mL) and improved skin architecture observed through histological analysis, which outperformed the effects of the natural chemicals in dispersion. These findings highlight the therapeutic potential of Cannonau pomace extract-loaded PG-PEVs as a promising, sustainable dermatological strategy. Moreover, this study supports the valorisation of agricultural side-streams into high-value cosmeceuticals, aligning with circular economy principles., This publication has been produced with the financial assistance of Fondazione di Sardegna 2021, "Valorisation of agri-food side-streams to manufacture sustainable medical devices, nutraceutical and cosme-ceutical products, feeds and fertilizers boosting health and quality of life (Waste2Health) " and Italian PNRR Program, specifically the Project "Ecosystem of Innovation for Next Generation Sardinia, Spoke n. 9, Environment protection and valorisation". The Sapienza Research Infrastructure is acknowledged for the SAXS measurements at SAXSLab Sapienza, funded by the Large Equipment Project 2015-C26J15BX54. This work benefited from the use of the SasView application, originally developed under NSF award DMR-0520547. SasView contains code developed with funding from the European Union's Horizon 2020 research and innovation programme under the SINE2020 project, grant agreement No 654000. Carmen Escobedo Lucea (CEL) is funded by the Plan GenT Excellence Program of the Conselleria de Sanidad, with reference CDEI-02/20-A.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Modulating protein unfolding and refolding via the synergistic association of an anionic and a nonionic surfactant

  • Hjalte, Johanna
  • Dielh, Carl
  • Leung, Anna E.
  • Poon, Jia-Fei
  • Porcar, Lionel
  • Dalgliesh, Robert
  • Sjögren, Helen
  • Wahlgren, Marie
  • Sánchez Fernández, Adrián
Hypothesis Nonionic surfactants can counter the deleterious effect that anionic surfactants have on proteins, where the folded states are retrieved from a previously unfolded state. However, further studies are required to refine our understanding of the underlying mechanism of the refolding process. While interactions between nonionic surfactants and tightly folded proteins are not anticipated, we hypothesized that intermediate stages of surfactant-induced unfolding could define new interaction mechanisms by which nonionic surfactants can further alter protein conformation. Experiments In this work, the behavior of three model proteins (human growth hormone, bovine serum albumin, and β-lactoglobulin) was investigated in the presence of the anionic surfactant sodium dodecylsulfate, the nonionic surfactant β-dodecylmaltoside, and mixtures of both surfactants. The transitions occurring to the proteins were determined using intrinsic fluorescence spectroscopy and far-UV circular dichroism. Based on these results, we developed a detailed interaction model for human growth hormone. Using nuclear magnetic resonance and contrast-variation small-angle neutron scattering, we studied the amino acid environment and the conformational state of the protein. Findings The results demonstrate the key role of surfactant cooperation in defining the conformational state of the proteins, which can shift away or toward the folded state depending on the nonionic-to-ionic surfactant ratio. Dodecylmaltoside, initially a non-interacting surfactant, can unexpectedly associate with sodium dodecylsulfate-unfolded proteins to further impact their conformation at low nonionic-to-ionic surfactant ratio. When this ratio increases, the protein begins to retrieve the folded state. However, the native conformation cannot be fully recovered due to remnant surfactant molecules still adsorbed to the protein. This study demonstrates that the conformational landscape of the protein depends on a delicate interplay between the surfactants, ultimately controlled by the ratio between them, resulting in unpredictable changes in the protein conformation
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Exploiting spatial isomerism to modulate the assembled phase and rheological response of compositionally identical sugar-based surfactants

  • Poon, Jia-Fei
  • Cabezón Vizoso, Alfonso
  • Gulotta, Alessandro
  • Mahmoudi, Najet
  • Ulvenlund, Stefan
  • García Fandiño, Rebeca
  • Sánchez Fernández, Adrián
For decades, extensive surfactant libraries have been developed to meet the requirements of downstream applications. However, achieving functional diversity has traditionally demanded a vast array of chemical motifs and synthetic pathways. Herein, a new approach for surfactant design based on structural isomerism is utilised to access a wide spectrum of functionalities. A library of C18-aliphatic maltosides was prepared through Koenigs–Knorr glycosylation, with their properties tuned through anomerism, stereoisomerism, regioisomerism, and the degree of tail unsaturation. Self-assembly of the amphiphiles gave rise to various morphologies, ranging from small micelles to large one-dimensional semiflexible assemblies, which were ultimately defined by the directionality of the supramolecular interactions imposed by the angular restraints of the isomeric centres. Remarkably, the microscopic phase determines the rheological behaviour of the system, which accesses Newtonian solutions, viscoelastic fluids, and gels with customised mechanical properties. The approach outlined in this study serves as a blueprint for the design of novel bioderived surfactants with diverse behaviours without altering the chemical composition of the surfactants, where the understanding of molecular interactions can potentially be used to predict and design the assembly and function of isomerically varied amphiphiles.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Revealing the complex self-assembly behaviour of sodium deoxycholate in aqueous solution

  • Jover Ramos, Aida
  • Fraga López, Francisco
  • Meijide del Río, Francisco Ángel
  • Vázquez Tato, José
  • Cautela, Jacobo
  • Giudice, Alessandra del
  • Gregorio, Maria Chiara di
Hypothesis Sodium deoxycholate is a natural bile salt produced by animals and fulfilling important physiological processes. It is also used as dispersive surfactant and building block for self-assembled architectures in biology and material science. Although long debated, the study of its self-assembly in water is hereto incomplete and the models of the known aggregates are still controversial. This background suggests a complex scenario likely missing of additional mesophases. Experiments Electron and optical microscopy techniques were crossed with SAXS data for the research. Findings Novel rod, sponge, vesicle, lamellae, nanotube phases and reversible transitions among them arise at conditions (concentration, pH, temperature, ionic strength, ionic composition) fitting the physiological working environment of sodium deoxycholate. These findings enlarge the perspective towards different directions. The integration of the previous literature with this work removes any interpretative contradiction since all the structures cover the entire spectrum of phases expected for surfactants, thus being explained according to the Israelachvili’s scheme. It is not trivial that a single molecule can show such a high structural variability. This fact highlights a very versatile system. Probably it is not a coincidence that it occurs in a multitasking biomolecule. These results furnish fundamental knowledge to clarify the bile salts’ role in vivo.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantum effects in muon spin spectroscopy within the stochastic self-consistent harmonic approximation

  • Onuorah, Ifeanyi John
  • Bonfà, Pietro
  • De Renzi, Roberto
  • Monacelli, Lorenzo
  • Mauri, Francesco
  • Calandra, Matteo
  • Errea, Ion
Muon spin rotation experiments involve muons that experience zero-point vibration at their implantation sites. Quantum-mechanical calculations of the host material usually treat the muon as a point impurity, ignoring its zero-point vibrational energy that, however, plays a role in determining the stability of calculated implantation sites and estimating physical observables. As a first-order correction, the muon zero-point motion is usually described within the harmonic approximation, despite the anharmonicity of the crystal potential. Here we apply the stochastic self-consistent harmonic approximation, a quantum variational method devised to include anharmonic effects in total energy and vibrational frequency calculations, in order to overcome these limitations and provide an accurate ab initio description of the quantum nature of the muon. We applied this full quantum treatment to the calculation of the muon contact hyperfine field in textbook-case metallic systems, such as Fe, Ni, Co including MnSi and MnGe, improving agreement with experiments. Our results show that there are anharmonic contributions to the muon vibrational frequencies with the muon zero-point energies above 0.5 eV. Finally, in contrast to the harmonic approximation, we show that including quantum anharmonic fluctuations, the muon stabilizes at the octahedral site in bcc Fe., RDR acknowledges grants from the European Union’s Horizon 2020 research and innovation program under Grant Agreement No. 654000. RDR, PB and IJO also acknowledge computing resources provided by, the Swiss National Supercomputing Centre (CSCS) under Project ID sm16, CINECA under Project ID IsC58, the STFC Scientific Computing Departments SCARF cluster and the HPC resources at the University of Parma, Italy. IE acknowledges funding from the Spanish Ministry of Economy and Competitiveness (FIS2016-76617-P). This work is part of the PhD thesis of IJO at the University of Parma, Italy
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The instrument suite of the European Spallation Source

  • Andersen, K. H.
  • Deen, P. P.
  • Brückel, Thomas
  • Alba-Simionesco, Ch.
  • Glavic, Artur G.
  • Schweika, W.
  • Martínez, J. L.
  • Zanetti, Matteo
  • Masi, F.
  • Chowdhury, Mithun
  • Bordallo, Heloisa N.
  • Scatigno, Claudia
  • Parker, Stewart F.
  • Fernández-Alonso, Félix
  • Senesi, Roberto
  • Andreani, Carla
  • Martín-Rodríguez, D.
  • Gorini, Giuseppe
  • Taylor, James
  • Müller, Marcus
The MIRACLES team: K.H. Andersen, et al., An overview is provided of the 15 neutron beam instruments making up the initial instrument suite of the European Spallation Source (ESS), and being made available to the neutron user community. The ESS neutron source consists of a high-power accelerator and target station, providing a unique long-pulse time structure of slow neutrons. The design considerations behind the time structure, moderator geometry and instrument layout are presented. The 15-instrument suite consists of two small-angle instruments, two reflectometers, an imaging beamline, two single-crystal diffractometers; one for macromolecular crystallography and one for magnetism, two powder diffractometers, and an engineering diffractometer, as well as an array of five inelastic instruments comprising two chopper spectrometers, an inverse-geometry single-crystal excitations spectrometer, an instrument for vibrational spectroscopy and a high-resolution backscattering spectrometer. The conceptual design, performance and scientific drivers of each of these instruments are described. All of the instruments are designed to provide breakthrough new scientific capability, not currently available at existing facilities, building on the inherent strengths of the ESS long-pulse neutron source of high flux, flexible resolution and large bandwidth. Each of them is predicted to provide world-leading performance at an accelerator power of 2 MW. This technical capability translates into a very broad range of scientific capabilities. The composition of the instrument suite has been chosen to maximise the breadth and depth of the scientific impact of the early years of the ESS, and provide a solid base for completion and further expansion of the facility., Some of the work described here is part of projects that have received funding from the European Union’s Horizon 2020 research programme: SINE 2020 under grant agreement number 654000, BrightnESS under grant agreement number 676548, and SoNDe under grant agreement number 654124. Financial support for the fast-shutter upgrade for FREIA from Swedish Research Council VR, grant no 2018-05013, is acknowledged. The VESPA team gratefully acknowledges the Science & Technology Facilities Council (STFC) and the CNR , within the CNR-STFC Agreement (2014–2020) No. 3420., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-background materials for high pressure cells used in inelastic neutron scattering experiments

  • Kibble, M. G.
  • Laliena, Victor
  • Goodway, C. M.
  • Lelièvre-Berna, E.
  • Kamenev, K. V.
  • Klotz, S.
  • Kirichek, O.
The signal-to-noise ratio is the ultimate limiting factor for high pressure neutron scattering experiments where sample environment equipment could create significant background signal which in many cases may significantly exceed the signal from the sample itself. This is the particularly serious issue in case of high-pressure sample environment for inelastic neutron scattering. Here we review materials which could be used for development of new generation of high-pressure cells for inelastic and quasi-elastic neutron scattering experiments. We also present results of modelling of the background of high-pressure vessels made out of different materials. This approach will allow designing and producing high pressure vessels with parameters desired for particular neutron scattering experiment., This work was performed within the world class Science and Innovation with Neutrons in Europe 2020 (“SINE 2020”) project, funded by the European Commission, Grant Agreement n°654000., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Monte Carlo simulation of neutron scattering by a textured polycrystal

  • Laliena, Victor
  • Vicente-Álvarez, Miguel Ángel
  • Campo, Javier
A method of simulating the neutron scattering by a textured polycrystal is presented. It is based on an expansion of the scattering cross sections in terms of the spherical harmonics of the incident and scattering directions, which is derived from the generalized Fourier expansion of the polycrystal orientation distribution function. The method has been implemented in a Monte Carlo code as a component of the McStas software package, and it has been validated by computing some pole figures of a Zircaloy-4 plate and a Zr–2.5Nb pressure tube, and by simulating an ideal transmission experiment. The code can be used to estimate the background generated by components of neutron instruments such as pressure cells, whose walls are made of alloys with significant crystallographic texture. As a first application, the effect of texture on the signal-to-noise ratio was studied in a simple model of a diffraction experiment, in which a sample is placed inside a pressure cell made of a zirconium alloy. With this setting, the results of two simulations were compared: one in which the pressure-cell wall has a uniform distribution of grain orientations, and another in which the pressure cell has the texture of a Zr–2.5Nb pressure tube. The results showed that the effect of the texture of the pressure cell on the noise of a diffractogram is very important. Thus, the signal-to-noise ratio can be controlled by appropriate choice of the texture of the pressure-cell walls., Funding for this research was provided by the European Union’s Horizon 2020 (grant No. 654000); Ministerio de Ciencia, Innovacion y Universidades (Spain) (grant No. PGC2018-099024-B- I00); Consejo Superior de Investigaciones Cientificas (Spain) (grant No. I-COOP B20319)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Routines for optimizing neutron scattering instruments with McStas

  • Laliena, Victor
  • Vicente-Álvarez, Miguel Ángel
  • Campo, Javier
We present software routines for simulating the transport of thermal neutrons through materials relevant for neutron instrumentation. The elastic interactions in different types of textured polycrystals are modelled and implemented in the routines. Three limit cases of textures are explicitly considered: powder texture, with uniform distribution of grain orientations, mosaic single crystal texture, with a distribution of orientations sharply peaked about one direction, and ideal fibre textures. Sharp textures can be modelled as combinations of these three limit textures. For polycrystals with mild textures, a different method is used. The inelastic scattering is treated in the incoherent approximation, including multi-phonon terms of arbitrary large order. The routines have been implemented in the McStas software package., We acknowledge Grant No. PGC-2018-099024-B-I00 from Spanish Ministry of Science Innovation and Universities and funding from the project I-COOP B20319. This work was performed within the world class Science and Innovation with Neutrons in Europe 2020 (“SINE2020”) project, funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 654000., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A NMR and SANS study of alkali-borosilicate behaviour under thermal neutron irradiation

  • Boffy, R.
  • Martel, L.
  • Schweins, R.
  • Somers, J.
  • Beaucour, J.
  • Bermejo, Francisco Javier
9 pags., 14 figs., 9 tabs., The internal structure of several alkali-borosilicate glasses has been studied when exposed to a high thermal neutron flux. More specifically, the different glasses we are interested in are widely used around the globe for neutron guide manufacturing and show drastically different resistance to irradiation. Samples were irradiated with the thermal flux from T4 experimental tube in ILL¿s High Flux Reactor up to a fluence of several n/cm. The experimental tools employed for the structural analysis were Nuclear Magnetic Resonance (NMR) and Small Angle Neutron Scattering (SANS). NMR measurements allowed to detect the modification of atoms¿ close environment and these results have been correlated to evolutions at macroscopic scale. In addition, neutron scattering measurements have demonstrated the possibility to detect phase segregation in a zinc-alkali-borosilicate., Financial support from the IR-RMN-THC Fr3050 CNRS for conducting the research is gratefully acknowledged. This work benefited from the use of the SasView application, originally devel- oped under NSF award DMR-0520547. SasView contains code de- veloped with funding from the European Union’s Horizon 2020 research and innovation programme under the SINE2020 project, grant agreement N º654000. We would like to thank the guide manufacturers for the assistance they provided throughout this study. Romain Boffy acknowledges financial support from the ESS- Bilbao Consortium. Finally, the study here exposed would not have been possible without the combined effort s of ILL staff through- out several years, specially the SMAE, BPC, Bloc-Pile and Radio- Protection services.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A new approach to computing the incoherent neutron scattering function

  • Laliena, Victor
  • Dawidowski, J.
  • Cuello, Gabriel J.
  • Campo, Javier
A new method for calculating the incoherent neutron scattering function for solids is introduced, based on the traditional phonon expansion, where the terms are calculated using the saddle point approximation for each term. The method is simple enough to be used in calculation systems of practical application. It provides very accurate results even for the tails of the scattering function, and is superior to the Gaussian approximation to the phonon terms. Numerical and experimental comparisons are presented in different types of magnitudes derived from the double differential cross section, using vanadium as a test case., This project has received funding from the EU H2020 research and innovation programme under grant agreement No 654000 SINE2020. Grants No PGC-2018-099024-B-I00-ChiMag from the Ministry of Science and Innovation of Spain, i-COOPB20524 from CSIC, Spain, DGA-M4 from the Diputación General de Aragón (Spain), and 06/C563 from Universidad Nacional de Cuyo (Argentina) are also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the surface chemistry of metal-organic polyhedra in their assembly into ultrathin films for gas separation

  • Tejedor, Inés
  • Andrés, Miguel A.
  • Carné-Sánchez, Arnau
  • Arjona, Mónica
  • Pérez-Miana, Marta
  • Sánchez-Laínez, Javier
  • Coronas, Joaquín
  • Fontaine, Philippe
  • Goldmann, Michel
  • Roubeau, Olivier
  • Maspoch, Daniel
  • Gascón, Ignacio
The formation of ultrathin films of Rh-based porous metal–organic polyhedra (Rh-MOPs) by the Langmuir–Blodgett method has been explored. Homogeneous and dense monolayer films were formed at the air–water interface either using two different coordinatively alkyl-functionalized Rh-MOPs (HRhMOP(diz)12 and HRhMOP(oiz)12) or by in situ incorporation of aliphatic chains to the axial sites of dirhodium paddlewheels of another Rh-MOP (OHRhMOP) at the air–liquid interface. All these Rh-MOP monolayers were successively deposited onto different substrates in order to obtain multilayer films with controllable thicknesses. Aliphatic chains were partially removed from HRhMOP(diz)12 films post-synthetically by a simple acid treatment, resulting in a relevant modification of the film hydrophobicity. Moreover, the CO2/N2 separation performance of Rh-MOP-supported membranes was also evaluated, proving that they can be used as selective layers for efficient CO2 separation., This work was funded by MCIN/AEI/10.13039/501100011033 and ERDF “A way of making Europe” (grant PID2019-105881RB-I00). The authors also acknowledge the support from the Spanish MINECO (project RTI2018-095622-B-I00) and the Catalan AGAUR (project 2017 SGR 238). It was also funded by the CERCA Programme/Generalitat de Catalunya and through a fellowship (LCF/BQ/PR20/11770011) from “la Caixa” Foundation (ID 100010434). ICN2 is supported by the Severo Ochoa programme from the Spanish MINECO (grant no. SEV-2017-0706). I.T. and M.P.-M. gratefully acknowledge their DGA PhD fellowship from Government of Aragon. The microscopy work was carried out in the Laboratorio de Microscopias Avanzadas at the Instituto de Nanociencia y Materiales de Aragon (LMA-INMA). This work benefited from the use of the SasView application, originally developed under NSF award DMR-0520547. SasView contains code developed with funding from the European Union’s Horizon 2020 research and innovation programme under the SINE2020 project, grant agreement no. 654000. The authors thank the synchrotron SOLEIL for beamtime provision under projects 20190435 and 20191874., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering thermoresponsive emulsions with branched copolymer surfactants

  • Alves da Silva, Marcelo
  • Rajbanshi, Abhishek
  • Opoku-Achampong, Daniel
  • Mahmoudi, Najet
  • Porcar, Lionel
  • Gutfreund, Philipp
  • Tummino, Andrea
  • Maestro, Armando
  • Dreiss, Cecile A.
  • Cook, Michael T.
This study describes thermo-rheological properties of branched copolymer surfactants (BCSs) stabilizing oil-in-water emulsions to generate materials exhibiting temperature-dependent gelation with the ability to solubilize a broad range of molecules. Four poly(N-isopropylacrylamide-ran-poly(ethylene glycol) methacrylate) (poly(NIPAM-ran-PEGMA)) BCSs with varying molecular weight (Mn), 4.7; 7.0; 7.8 and 9.0 kg mol−1, are investigated via oscillatory shear rheology, small angle neutron scattering (SANS), and neutron reflectivity (NR). Rheological thermoscans show that emulsions stabilized by the BCS with the lowest Mn (4.7 kg mol−1) are thermo-thinning, while with the other BCSs the emulsions display a thermo-thickening behavior. Emulsions stabilized with the BCS with Mn = 7.8 kg mol−1 form gels within a precise temperature window depending on BCS concentration. Small angle neutron scattering data analysis suggests that the BCS is present in two forms in equilibrium, small aggregates dispersed in the bulk water and an adsorbed polymeric layer at the oil/water interface. Changes in dimensions of these structures with temperature correlate with the macroscopic thermo-thinning/thermo-thickening behavior observed. Neutron reflectivity is conducted at the oil/water interface to allow further elucidation of BCS behavior in these systems., This work benefited from the use of the SasView application, originally developed under NSF award DMR-0520547. SasView also contains code developed with funding from the European Union's Horizon 2020 Research and Innovation Programme under the SINE2020 project, grant agreement No 654000. Experiments at the ISIS Neutron and Muon Source were supported by a beamtime allocation RB2000184 for Sans2d from the Science and Technology Facilities Council (10.5286/ISIS.E.RB2000184). The authors thank Institut Laue Langevin for the provision of neutron beam time on D11 instrument (10.5291/ILL-DATA.9-11-2028) and on Figaro instrument (10.5291/ILL-DATA.9-11-2028). The Engineering and Physical Sciences Research Council (EP/T00813X/1) and Royal Society of Chemistry (RF17-9915) are acknowledged for funding the research. The Royal Society of Chemistry and the Analytical Chemistry Trust Fund are also thanked for sponsoring the summer research project of D.O-A., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Developing advanced models of biological membranes with hydrogenous and deuterated natural glycerophospholipid mixtures

  • Corucci, Giacomo
  • Batchu, Krishna C.
  • Luchini, Alessandra
  • Santamaria, Andreas
  • Frewein, Moritz P.K.
  • Laux, Valérie
  • Haertlein, Michael
  • Yamaryo-Botté, Yoshiki
  • Botté, Cyrille Y.
  • Sheridan, Thomas
  • Tully, Mark
  • Maestro, Armando
  • Martel, Anne
  • Porcar, Lionel
  • Fragneto, Giovanna
Cellular membranes are complex systems that consist of hundreds of different lipid species. Their investigation often relies on simple bilayer models including few synthetic lipid species. Glycerophospholipids (GPLs) extracted from cells are a valuable resource to produce advanced models of biological membranes. Here, we present the optimisation of a method previously reported by our team for the extraction and purification of various GPL mixtures from Pichia pastoris. The implementation of an additional purification step by High Performance Liquid Chromatography-Evaporative Light Scattering Detector (HPLC-ELSD) enabled for a better separation of the GPL mixtures from the neutral lipid fraction that includes sterols, and also allowed for the GPLs to be purified according to their different polar headgroups. Pure GPL mixtures at significantly high yields were produced through this approach. For this study, we utilised phoshatidylcholine (PC), phosphatidylserine (PS) and phosphatidylglycerol (PG) mixtures. These exhibit a single composition of the polar head, i.e., PC, PS or PG, but contain several molecular species consisting of acyl chains of varying length and unsaturation, which were determined by Gas Chromatography (GC). The lipid mixtures were produced both in their hydrogenous (H) and deuterated (D) versions and were used to form lipid bilayers both on solid substrates and as vesicles in solution. The supported lipid bilayers were characterised by quartz crystal microbalance with dissipation monitoring (QCM-D) and neutron reflectometry (NR), whereas the vesicles by small angle X-ray (SAXS) and neutron scattering (SANS). Our results show that despite differences in the acyl chain composition, the hydrogenous and deuterated extracts produced bilayers with very comparable structures, which makes them valuable to design experiments involving selective deuteration with techniques such as NMR, neutron scattering or infrared spectroscopy., We are grateful to the ILL and the ESRF for awarding beamtimes (DOI: 105291/ILL-DATA.EASY-975) and (DOI: https://doi.org/10.15151/ESRF-DC-1026409781) respectively. Lipids were produced in the L-Lab (www.ill.eu/L-Lab) facility within the PSCM initiative at the ILL from biomass prepared in the D-Lab. We are grateful to Hanna Wacklin-Knecht (ESS) for useful discussions. This project received funding from the European Union's Horizon 2020 research and innovation program under grant agreement N 654000 (SINE2020) and from the League of advanced European Neutron Sources (LENS). CB, YYB and the GEMELI Lipidomic platform were supported by Agence Nationale de la Recherche, France (Project ApicoLipiAdapt grant ANR-21-CE44-0010), the Fondation pour la Recherche Médicale (FRM EQU202103012700), Laboratoire d'Excellence Parafrap, France (grant ANR-11-LABX-0024), LIA-IRP CNRS Program (Apicolipid project), the Université Grenoble Alpes (IDEX ISP Apicolipid), Indo-French Collaborative Research Program Grant CEFIPRA (Project 6003-1), and Région Auvergne Rhone-Alpes for the lipidomics analyses platform (Grant IRICE Project GEMELI). A.M. acknowledges the financial support from MICINN under grant PID2021-129054NA-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A novel gene delivery approach to face cystic fibrosis by non-viral vectors based on niocarbosomes

  • Maldonado, Iván
  • Gallego, Idoia
  • Enriquez-Rodriguez, Lucia
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Mashal, Mohamed
  • Attia, Noha
  • Puras, Gustavo
  • Pedraz, José Luis
Non-viral vectors are a promising approach to address genetic-based diseases, such as cystic fibrosis (CF), due to their safety profile and lower production costs compared to viral vectors. This study includes the development of conventional niosomes using the oil-in-water (o/w) emulsion technique, which were based on 2,3-di(tetradecyloxy)propan-1-amine (DTPA) cationic lipid and polysorbate 85 as a non-ionic surfactant. Additionally, novel niosomes referred to as niocarbosomes were developed incorporating carboxyl-functionalised single-walled carbon nanotubes (SWNT-COOH) as a helper component. The physicochemical properties of formulations and their complexes obtained upon the addition of genetic material, referred to as nioplexes and niocarboplexes respectively, were thoroughly examined using transmission electron microscopy (TEM), dynamic light scattering (DLS), and small-angle X-ray scattering (SAXS) techniques. Furthermore, the formation of protein corona around the non-viral vectors was investigated upon exposure to human blood plasma. Niocarbosomes complexed with pEGFP reporter gene transfected around 26% of treated cells mainly via the lipid rafts pathway, with a cell viability rate of 85%. Next, these niocarbosomes were complexed with a therapeutic plasmid coding for the cystic fibrosis transmembrane conductance regulator (CFTR) protein (pGM169) for CF treatment. Treated cells showed a 65% increase in CFTR functionality compared to untreated cells, demonstrating the potential of niocarbosome non-viral gene delivery systems to face CF disease., This work was supported by the Basque Country Government (Consolidated Groups, IT1448-22). Authors also wish to thank the intellectual and technical assistance from the ICTS “NANBIOSIS,” more specifically by the Drug Formulation Unit (U10) of the CIBER in Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN) at the University of the Basque Country (UPV/EHU). I.M. thanks the Spanish Ministry of science and innovation (Grant PID2019-106199RB-C21) predoctoral grant PRE2020-092307. L.E.R. thanks the Basque Country Government for the granted pre-doctoral fellowship (PRE_2022_1_0042). N.A. and M.M acknowledge the Spanish Ministry of Universities and the European Union-Next Generation EU for the Margarita Salas grant (MARSA21/98 and MARSA21/97, respectively) at the University of the Basque Country (UPV/EHU). A. I. and A. A. acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, Grant TED2021-130107A-I00 funded by MCIN/AEI/10.13039/501100011033 and Unión Europea “NextGenerationEU/PRTR”, This work benefited from the use of the SasView application, originally developed under NSF award DMR-0520547., SasView contains code developed with funding from the European Union’s Horizon 2020 research and innovation programme under the SINE2020 project, grant agreement No 654000., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Nylon 7,10: An odd-even polyamide with a complex melting and a peculiar high temperature polymorphic form

  • Arioli, Matteo|||0000-0001-7641-4881
  • Franco García, María Lourdes|||0000-0001-5968-285X
  • Martínez Guil, Juan Carlos
  • Puiggalí Bellalta, Jordi|||0000-0002-0640-4474
The crystalline structure of nylon 7,10, an odd–even polyamide derived from biobased sebacic acid, has been investigated to elucidate its complex polymorphism and thermal behavior. Solution-crystallized samples display two intense X-ray reflections at 0.439 nm and 0.380 nm, features that challenge a conventional sheet-type arrangement considering the presence of odd diamide units and an extended chain conformation. In contrast, melt-crystallized specimens adopt a well-defined pseudohexagonal structure at room temperature. Upon heating, a-modified crystals evolve toward a pseudohexagonal arrangement through a process involving partial melting, whereas cooling from the melt does not restore the a-modified packing. Close to fusion, an additional monoclinic/triclinic structure emerges, also detectable in the early stages of melt crystallization. Depending on solvent and thermal history, mixed structures are frequently obtained. These findings support the formation of hydrogen-bonded packings in which intermolecular H-bonds can be established in more than one direction. Calorimetric data further reveal a complex behavior, including the appearance of a high-temperature crystalline form that depends strongly on processing conditions. An equilibrium melting temperature of approximately 228 °C was estimated from the evolution of the main melting peak with crystallization temperature. Overall, these results highlight the pronounced structural plasticity of odd–even polyamides and the key role of thermal history in governing their polymorphic behavior., During the preparation of this manuscript/study, the author(s) used ChatGPT (OpenAI, GPT-4, version: ChatGPT April 2025) to refine the scientific language, improve clarity, and ensure consistency in grammar. The authors have reviewed and edited the output and take full responsibility for the content of this manuscript. The authors acknowledge the group eb-POLICOM: Polímers i Compòsits Ecològics i Biodegradables, a research group of the Generalitat de Catalunya (Grant 2021 SGR 01042). We acknowledge the project PID2022-140302OB-I00 funded by the Ministerio de Ciencia, Innovacion y Universidades (MICIU), the Agencia Estatal de Investigacion (AEI) and the FEDER funds. This work is part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M, funded by MICIU/AEI/10.13039/501100011033. Diffraction experiments were performed at the NCD-SWEET beamline of the ALBA Synchrotron with the collaboration of the ALBA staff. This work benefited from the use of the SasView application, originally developed under NSF award DMR-0520547. SasView includes code developed with funding from the European Union’s Horizon 2020 research and innovation program under the SINE2020 project, grant agreement No. 654000. M.A. acknowledges the predoctoral fellowship “Ayudas para contratos predoctorales para la formación de doctores 2019” from the Spanish Ministry of Science, Innovation and Universities.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Monte Carlo simulation of neutron scattering by a textured polycrystal

  • Laliena, Víctor
  • Vicente-Álvarez, Miguel Ángel
  • Campo, Javier
A method of simulating the neutron scattering by a textured polycrystal is presented. It is based on an expansion of the scattering cross sections in terms of the spherical harmonics of the incident and scattering directions, which is derived from the generalized Fourier expansion of the polycrystal orientation distribution function. The method has been implemented in a Monte Carlo code as a component of the McStas software package, and it has been validated by computing some pole figures of a Zircaloy-4 plate and a Zr-2.5Nb pressure tube, and by simulating an ideal transmission experiment. The code can be used to estimate the background generated by components of neutron instruments such as pressure cells, whose walls are made of alloys with significant crystallographic texture. As a first application, the effect of texture on the signal-to-noise ratio was studied in a simple model of a diffraction experiment, in which a sample is placed inside a pressure cell made of a zirconium alloy. With this setting, the results of two simulations were compared: one in which the pressure-cell wall has a uniform distribution of grain orientations, and another in which the pressure cell has the texture of a Zr-2.5Nb pressure tube. The results showed that the effect of the texture of the pressure cell on the noise of a diffractogram is very important. Thus, the signal-to-noise ratio can be controlled by appropriate choice of the texture of the pressure-cell walls.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of the Surface Chemistry of Metal-Organic Polyhedra in Their Assembly into Ultrathin Films for Gas Separation

  • Tejedor, Inés
  • Andrés, Miguel A.
  • Carné-Sánchez, Arnau
  • Arjona, Mónica
  • Pérez-Miana, Marta
  • Sánchez-Laínez, Javier
  • Coronas, Joaquín
  • Fontaine, Philippe
  • Goldmann, Michel
  • Roubeau, Olivier
  • Maspoch, Daniel
  • Gascón, Ignacio
The formation of ultrathin films of Rh-based porous metal-organic polyhedra (Rh-MOPs) by the Langmuir-Blodgett method has been explored. Homogeneous and dense monolayer films were formed at the air-water interface either using two different coordinatively alkyl-functionalized Rh-MOPs (HRhMOP(diz)12 and HRhMOP(oiz)12) or by in situ incorporation of aliphatic chains to the axial sites of dirhodium paddlewheels of another Rh-MOP (OHRhMOP) at the air-liquid interface. All these Rh-MOP monolayers were successively deposited onto different substrates in order to obtain multilayer films with controllable thicknesses. Aliphatic chains were partially removed from HRhMOP(diz)12 films post-synthetically by a simple acid treatment, resulting in a relevant modification of the film hydrophobicity. Moreover, the CO2/N2 separation performance of Rh-MOP-supported membranes was also evaluated, proving that they can be used as selective layers for efficient CO2 separation. © 2022 The Authors. Published by American Chemical Society.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nylon 7,10: An odd-even polyamide with a complex melting and a peculiar high temperature polymorphic form

  • Arioli, Matteo
  • Franco García, María Lourdes
  • Martínez Guil, Juan Carlos
  • Puiggalí Bellalta, Jordi
The crystalline structure of nylon 7,10, an odd–even polyamide derived from biobased sebacic acid, has been investigated to elucidate its complex polymorphism and thermal behavior. Solution-crystallized samples display two intense X-ray reflections at 0.439 nm and 0.380 nm, features that challenge a conventional sheet-type arrangement considering the presence of odd diamide units and an extended chain conformation. In contrast, melt-crystallized specimens adopt a well-defined pseudohexagonal structure at room temperature. Upon heating, a-modified crystals evolve toward a pseudohexagonal arrangement through a process involving partial melting, whereas cooling from the melt does not restore the a-modified packing. Close to fusion, an additional monoclinic/triclinic structure emerges, also detectable in the early stages of melt crystallization. Depending on solvent and thermal history, mixed structures are frequently obtained. These findings support the formation of hydrogen-bonded packings in which intermolecular H-bonds can be established in more than one direction. Calorimetric data further reveal a complex behavior, including the appearance of a high-temperature crystalline form that depends strongly on processing conditions. An equilibrium melting temperature of approximately 228 °C was estimated from the evolution of the main melting peak with crystallization temperature. Overall, these results highlight the pronounced structural plasticity of odd–even polyamides and the key role of thermal history in governing their polymorphic behavior., During the preparation of this manuscript/study, the author(s) used ChatGPT (OpenAI, GPT-4, version: ChatGPT April 2025) to refine the scientific language, improve clarity, and ensure consistency in grammar. The authors have reviewed and edited the output and take full responsibility for the content of this manuscript. The authors acknowledge the group eb-POLICOM: Polímers i Compòsits Ecològics i Biodegradables, a research group of the Generalitat de Catalunya (Grant 2021 SGR 01042). We acknowledge the project PID2022-140302OB-I00 funded by the Ministerio de Ciencia, Innovacion y Universidades (MICIU), the Agencia Estatal de Investigacion (AEI) and the FEDER funds. This work is part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M, funded by MICIU/AEI/10.13039/501100011033. Diffraction experiments were performed at the NCD-SWEET beamline of the ALBA Synchrotron with the collaboration of the ALBA staff. This work benefited from the use of the SasView application, originally developed under NSF award DMR-0520547. SasView includes code developed with funding from the European Union’s Horizon 2020 research and innovation program under the SINE2020 project, grant agreement No. 654000. M.A. acknowledges the predoctoral fellowship “Ayudas para contratos predoctorales para la formación de doctores 2019” from the Spanish Ministry of Science, Innovation and Universities., Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Influence of the surface chemistry of metal-organic polyhedra in their assembly into ultrathin films for gas separation

  • Tejedor, Inés|||0000-0002-8267-9306
  • Andrés, Miguel A.|||0000-0003-3691-3437
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Arjona, Mónica
  • Pérez-Miana, Marta
  • Sanchez-Lainez, Javier|||0000-0001-6627-0079
  • Coronas, Joaquin|||0000-0003-1512-4500
  • Fontaine, Philippe|||0000-0003-3394-6508
  • Goldmann, Michel
  • Roubeau, Olivier|||0000-0003-2095-5843
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Gascón, Ignacio|||0000-0002-3492-6456
The formation of ultrathin films of Rh-based porous metal-organic polyhedra (Rh-MOPs) by the Langmuir-Blodgett method has been explored. Homogeneous and dense monolayer films were formed at the air-water interface either using two different coordinatively alkyl-functionalized Rh-MOPs (HRhMOP(diz)and HRhMOP(oiz)) or by in situ incorporation of aliphatic chains to the axial sites of dirhodium paddlewheels of another Rh-MOP (OHRhMOP) at the air-liquid interface. All these Rh-MOP monolayers were successively deposited onto different substrates in order to obtain multilayer films with controllable thicknesses. Aliphatic chains were partially removed from HRhMOP(diz)films post-synthetically by a simple acid treatment, resulting in a relevant modification of the film hydrophobicity. Moreover, the CO/Nseparation performance of Rh-MOP-supported membranes was also evaluated, proving that they can be used as selective layers for efficient CO2 separation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Metal-organic frameworks, why make them small?

  • Wang, Jiemin
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Recent studies have demonstrated that metal-organic frameworks (MOFs) can be miniaturized down to the submicroscale and even nanoscale to create small MOFs. Herein, the basic concepts and recent progresses concerning the core question of "MOFs, why make them small?" are briefly introduced from three perspectives: those of size, shape, and processability. Small sizes endow MOFs with large outer surface area/volume ratios, leading to important differences in their characteristics (e.g., outer surface energy, number of defects, etc.) relative to their bulk scale counterparts and thus, opening the door to size-dependent properties such as flexibility or catalytic performance. Downsizing MOFs also enables shaping of them into unusual shapes. Among the most appealing morphologies are 2D nanosheets, whose structure can favor certain porosity-related applications. The controlled miniaturization of MOF particles also favors their integration onto surfaces and into devices as well as their colloidal stability, which in turn translates to the ability to use readily processable MOF-based liquids in countless processes, such as to drive the assembly of sophisticated meso- and macroscopic architectures, gels, monoliths, and porous liquids. It is believed that ongoing research to shrink MOFs via nanotechnology, as has been done with other classes of materials, will continue to yield novel MOF-related materials that exhibit unprecedented structural and functional properties.