Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modulating the Mucosal Drug Delivery Efficiency of Polymeric Nanogels Tuning their Redox Response and Surface Charge

  • Udabe, Jakes
  • Muñoz Juan, Amanda
  • Tafech, Belal
  • Orellano, María Soledad
  • Hedtrich, Sarah
  • Laromaine, Anna
  • Calderón, Marcelo
Mucus is a hydrated, viscoelastic, and adhesive gel that lubricates and protects the body from pathogens; however, its protective function hinders drug/nanomedicine diffusion and treatment efficiency. Therefore, novel drug delivery strategies are required to overcome challenging mucosal barriers. Here, multi-responsive nanogels (NGs) are developed and explored their interaction with mucus. Specific NG features (e.g., surface charge, temperature responsiveness, and redox response) are evaluated in a typical mucus-associated environment (i.e., mucin proteins and high glutathione concentrations). The results demonstrate that biocompatibility and the capacity to deliver a protein through mucosal barriers in different in vitro and in vivo models highlight the importance of specific NG design elements. Disulfide bonds are highlighted as redox-sensitive cross-linkers within the NG structure as critical for drug delivery performance; they function as degradation points that enable NG degradation and subsequent drug release and anchoring points to adhere to mucin, thereby enhancing their residence time at the desired site of action. Additionally, it is confirmed that surface charges impact interactions with mucin; positively charged NGs exhibit improved interactions with mucin compared to negatively charged and neutral NGs. Overall, the findings underline the importance of redox response and surface charge in NG design for reaching efficient mucosal drug delivery., The authors thank for technical and human support provided by David Esporrin, Huiyi Wang, and Beatriz Martín-García for the characterization of scanning electron microscope, atomic force microscopy, and Raman spectroscopy measurements, respectively. The authors thank for the technical and human support of Unidad de Microscopía Confocal e Imagen Celular (Confocal Microscopy and Cellular Imaging Unit, IPER, Department of Genetic and Molecular Medicine, Institut de Recerca Sant Joan de Déu, Hospital Sant Joan de Déu, Barcelona, Spain) provided mainly by Dr. Mònica Roldán, for the characterization of C.elegans microscopy measurements, and by SGIker (UPV/EHU/ ERDF, EU) for the characterization by 1H-NMR. The authors would like to thank Dr. Stuart P. Atkinson for his collaboration in the revision of the manuscript. Image 5A was performed with Biorender. The authors acknowledge the financial support of the Basque Health Department (projects 2023333010 and 2023333023), the University of the Basque Country (projects COLLAB22/05 and GIU21/033), IKERBASQUE-Basque Foundation for Science, the Generalitat de Catalunya (2017SGR765: grant), the Ministry of Science and Innovation of the Government of Spain (grants PID2022-142739OB-I00 and PID2021-122645OB-100 funded by MICIU/AEI/ 10.13039/501100011033 and by FEDER, UE; “María de Maeztu” Programme for Center of Excellence in R&D, grant CEX2023-001303-M funded by MICIU/AEI/ 10.13039/501100011033; “Severo Ochoa” Programme for Center of Excellence in R&D (CEX2019-000917) and FPI Fellowship PRE2019-088584), Mitacs Canada (IT19059), Providence Healthcare (BT, SH), and the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) – Project ID 431232613 – SFB 1449 (SH). A.M.J. thanks the Spanish Government for PhD fellowship FPU18/05190. MSO is thankful for the funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 896775. A.M.J. and A.L. participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics toward a circular economy (SusPlast) and in the Aerogels COST ACTION (CA 18125), EPNOE network, Conexión Nanomedicina del CSIC, and Red Nanocare 2.0., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(carboxylated ether)s as cement additives: The effect of the addition method on hydration kinetics

  • Beldarrain, Sara
  • Goracci, Guido
  • Dolado, Jorge S.
  • Barquero, Aitor
  • Leiza, Jose R.
This article belongs to the Section Construction and Building Materials., Polycarboxylate ether (PCE) superplasticisers have been widely used in cement formulations. However, it is not until recently that several studies have analysed the relationship between the properties and the molecular structure. In the present work, PCEs with different side chain lengths and charge densities synthesised through free radical copolymerisation are used to analyse the effect they have on the hydration of ordinary Portland cement (OPC). It was found that the addition method of these PCEs to the OPC significantly affects the hydration kinetics of the cement paste. When PCEs are added through the direct addition method, a linear dependency between the retardation of hydration and the microstructure of the used PCEs is observed. On the contrary, when PCEs are added through the delayed addition method (PCEs are added to the cement paste 5 min after water), no retardation in hydration is observed, but the rate of hydration is reduced., This work has been partially supported by the project “Novel eco-cementitious materials and components for durable, competitive, and bio-inspired offshore floating PV substructures (NaturSea-PV)”, funded by the Horizon Europe Programme of the European Union under contract number GA nº 101084348. However, the views and opinions expressed are those of the author(s) only and do not necessarily reflect those of the European Union or the European Climate Infrastructure and environment Executive Agency (CINEA). Neither the European Union nor the granting authority can be held responsible for them. The financial support from Eusko Jaurlaritza (GV-IT-1512-22), Ministerio de Ciencia e innovación (PID2021-123146OB-I00), and LTC Green Concrete is gratefully acknowledged. We also acknowledge support from the María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033 and Sara Beldarrain thanks the University of the Basque Country UPV/EHU for the scholarship (PIF20/61)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Computational analysis of the Lewis acid-catalyzed Zwitterionic Ring-Expansion Polymerization (ZREP) of monosubstituted ethylene oxide

  • Gastearena, Xuban
  • Barroso-Bujans, Fabienne
  • Ruipérez, Fernando
  • Matxain, Jon M.
This study investigates the reaction mechanism of the zwitterionic ring expansion polymerization (ZREP) of monosubstituted ethylene oxide using boron-based Lewis acids as catalysts to produce cyclic polyethers. The research analyzes various parameters, such as the nature of the substituents (electron-withdrawing, EWG or electron-donating, EDG), the type of catalyst, and the solvent, to understand their influence on the reaction’s kinetics, thermodynamics, and regioselectivity. Key findings include that EDGs lower the kinetic barrier of the rate-determining step and favor the reaction at the substituted carbon, while EWGs increase this barrier, making the reaction less favorable. The study also shows that all catalysts tested efficiently activate the epoxide monomer with similar barriers for the rate-determining step, and the regioselectivity trends align with the substituent’s electronic effects. Steric effects of substituents were found to dominate the competition between monomer addition and cyclization termination, with most catalysts promoting cyclization. Additionally, the solvent had minimal impact on the polymerization mechanism. This computational study provides valuable insights into the synthesis of cyclic polymers and advances the development of catalysts for ZREP of monosubstituted ethylene oxide., The authors acknowledge support from grants PID2021-123438NB-I00 and PID2023-148587NB-I00. funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU, and from the María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033 and Eusko Jaurlaritza (Basque Government, project IT1584-22). X.G. is thankful for financial support from the Basque Government through Fellowship PRE_2024_2_0198., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PRODAN and C120 fluorescent probes to investigate the structure of branched cyclic polyglycerol

  • Pagnacco, Carlo Andrea
  • Barroso-Bujans, Fabienne
  • Calderón, Marcelo
  • Orellano, María Soledad
Hyperbranched polyglycerols have been widely studied in biomedical applications due to their biocompatibility and chemical functionality. Branched cyclic polyglycerols, which have a cyclic structure in their central core, belong to the family of hyperbranched polyglycerols but have not been extensively explored. To better understand the potential of these novel polymers to host small molecules and to elucidate their complex structure, we proposed here the use of environmentally sensitive probes, PRODAN and Coumarin 120 (C120), which undergo changes in their fluorescence intensity and emission maxima in response to changes in the environment. To this end, the photophysical properties of both fluorescent dyes were studied in the presence of aqueous solutions of branched cyclic polyglycerol and a number of compositionally and structurally similar molecules and macromolecules, including hyperbranched polyglycerol, β-cyclodextrin, glycerol, and crown ethers such as 12-crown-4, 15-crown-5, 18-crown-6, and 2-hydroxymethyl 18-crown-6. PRODAN is able to accept hydrogen bonds and C120 is able to accept and donate hydrogen bonds. Consequently, the distinct photophysical response of PRODAN and C120 when interacting with the above molecules and macromolecules, rich in either hydroxyl or ether groups, provided valuable insights into the structure of branched cyclic polyglycerols and their ability to host small molecules., The authors gratefully acknowledge support from the Spanish Research Agency (MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, (grant number PID2021-123438NB-I00);, “María de Maeztu” Programme for Center of Excellence in R&D, grant CEX2023-001303- M funded by MICIU/AEI/ 10.13039/501100011033, the Basque Government (IT1566-22), and the Diputación Foral de Guipúzcoa (RED 2023-CIEN-000047-01), the University of the Basque Country (projects COLLAB22/05 and GIU21/033), and IKERBASQUE-Basque Foundation for Science., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling the crucial morphological effect of non-conducting polymer binders on inorganic-rich hybrid electrolytes

  • Stankiewicz, Natalia
  • Focks, Leon
  • Cui, Mengyang
  • Fernández, Mercedes
  • Modin, Evgenii
  • Iturrospe, Amaia
  • Pajuelo-Corral, Oier
  • Simon, Erik
  • Arbe, Arantxa
  • Siffalovic, Peter
  • Goward, Gillian R.
  • Chuvilin, Andrey
  • Villaluenga, Irune
The limited fundamental knowledge about polymer binder selection in inorganic-rich hybrid electrolytes (HSEs) hinders their optimization and translation to an industrial scale. Herein, we investigate, for the first time, the crucial morphological effect of non-conducting polymer binders in HSEs based on a halide electrolyte (Li3InCl6). We compared the effect of the ordered nanostructured styrene–ethylene–butylene–styrene (SEBS) block copolymer and disordered polyisobutylene (PIB) homopolymer binders. This work was aimed at understanding ionic conduction transport across halide-based inorganic-rich HSEs with different polymer morphologies to optimize their design. We investigated ionic conductivity via EIS and Li+ diffusion using 7Li PFG-NMR, and the obtained results were supported by 3D reconstruction from cryo-plasma FIB-SEM images, which were further correlated with rheology measurements. PIB HSE presented higher transport properties than SEBS HSE with higher ionic conductivity (0.39 × 10−4 and 0.23 × 10−4 S cm−1 at 30 °C, respectively) and 7Li diffusion (6.3 × 10−13 and 4.3 × 10−13 m2 s−1 at 30 °C, respectively) owing to a less tortuous percolated inorganic network observed via the 3D reconstruction of cryo-plasma FIB-SEM images. Moreover, rheology measurements indicated that HSEs composed of ordered block copolymers should be processed in the disordered state (T > TODT) (in which the ordered microdomains disappear), reaching the terminal flow zone as disordered homopolymers to improve the percolated inorganic network and thereby achieving high transport properties in HSEs. Finally, Li plating/stripping demonstrated a more stable electrochemical performance of PIB HSE and higher critical current density (400 μA cm−2) compared with SEBS HSE (25 μA cm−2), which was in good agreement with the obtained transport and morphological properties., The authors acknowledge the financial support from the Spanish Ministry of Science, Agencia Estatatal de Investigacion (PID2020-115080RA-I00, CNS2023-144408). The Basque Government, Department of Education through PIBA_2024_1_0051 is acknowledged. We acknowledge the support from the María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033. L. F. acknowledges financial support from the German Academic Scholarship Foundation. A. A. and A. I. acknowledge the Grant PID2021-123438NB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and financial support from Eusko Jaurlaritza, code: IT1566-22. We acknowledge “Maria de Maeztu” Units of Excellent Programme No. CEX2020-001038-M and project EQC2021-007107-P of “Subprograma Estatal de Infraestructuras de Investigación y Equipamiento Científico-Técnico” of Spanish Ministry of Science and Innovation. We also acknowledge the support of the Slovak Research and Development Agency (APVV-20-0111). We acknowledge the financial support of the Basque Government through the IKUR Strategy. This work has received financial support from the European Union's Horizon Europe research and innovation programme under grant agreement no. 101069726 (SEATBELT project). Finally, we gratefully acknowledge the ALBA synchrotron facility (Proposal number 2024098628) for the funding and help to perform the WAXS experiments at BL11-NCD-SWEET beamline with the collaboration of ALBA staff., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001038-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Doping effects on magnetic layered hybrid organic–inorganic transition metal halide perovskites

  • Mattioni, Samuele
  • Asensio, Yaiza
  • Solokha, Pavlo
  • Olano-Vegas, Lucía
  • Prato, Mirko
  • De Negri, Serena
  • Gobbi, Marco
  • Casanova, Félix
  • Mateo-Alonso, Aurelio
  • Hueso, Luis E.
  • Martín-García, Beatriz
The modulation of the magnetic properties of hybrid organic-inorganic perovskites (HOIPs) is key for their implementation in spintronics. The introduction of different transition metal cations at the octahedral sites can further enhance their structural and chemical versatility. Here, we report three different doped systems, (PEA)2M11-xM2xCl4 (M = Cu2+, Mn2+, Co2+; PEA = phenethylammonium), to highlight how the presence of two metal cations with different spin configurations can modify their structural, optical, and magnetic properties. For low dopant content (x < 0.1), we obtain layered single crystalline phases confirmed by X-ray diffraction and Raman spectroscopy. In (PEA)2Mn1-xCoxCl4 compounds, we observe antiferromagnetic behavior with a Neel temperature that varies with the dopant content and the disappearance of spin-flopping and spin-canting behavior due to the incorporation of Co2+ ions in the HOIP lattice. By contrast, the single-phase (PEA)2Mn1-xCuxCl4 crystal shows a canted antiferromagnetic behavior, typical of Mn2+ HOIPs, and the single-phase (PEA)2Cu1-xCoxCl4 compound behaves as a 2D ferromagnet with properties almost independent of the Co2+ dopant content. Our work demonstrates that, with the proper choice of dopant and host, the magnetic properties of layered HOIPs can be modified using low dopant concentrations, providing a powerful approach to create tailored 2D magnets., The authors acknowledge funding from MICIU/AEI/10.13039/501100011033 (Grant CEX2020-001038 M); from MICIU/AEI and ERDF/EU (Projects PID2021-122511OB-I00 and PID2021-128004NB-C21); from MICIU/AEI and European Union NextGenerationEU/PRTR (Project PCI2021-122038-2A); and from the Basque Science Foundation for Science (IKERBASQUE Project HYMNOS). B.M.-G. and M.G. gratefully acknowledge support from MICIU/AEI and the European Union NextGenerationEU/PRTR (grant nos. RYC2021-034836-I and RYC2021-031705-I, respectively). S.M. acknowledges support from the Department of Education of the Basque Government under the Predoctoral Programme for the Training of Nondoctoral Research Staff. Y.A. and L.O.-V. are thankful for the funding from Spanish MICIU/AEI/10.13039/501100011033 and ESF+ (PhD grants PRE2021-099999 and PRE2022-104385, respectively). A.M.-A. acknowledges support from the Basque Science Foundation for Science (IKERBASQUE), POLYMAT, the University of the Basque Country, Diputación de Guipúzcoa, Gobierno Vasco (PIBA_2024_1_0030 and BERC programme), Agencia Estatal de Investigación (Projects PID2021-124484OB-I00, PID2024-157565NB-I00, PCI2022-132921, CEX2020-001067-M and María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001038-M)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001067-M)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Can five chemically different lamellar crystals self-assemble in a single spherulite?

  • Matxinandiarena, Eider
  • Pérez-Camargo, Ricardo A.
  • Sebastián, Víctor
  • Zhang, Pengfei
  • Ladelta, Viko
  • Hadjichristidis, Nikos
  • Müller, Alejandro J.
Semicrystalline polymers with multiple crystallizable blocks provide opportunities to develop materials with hierarchical structures and customized properties, but they also pose unique challenges for understanding their crystallization. In this work, we investigate the crystallization from a miscible melt of a pentablock quintopolymer composed of five potentially crystallizable and biocompatible blocks, composed of polyethylene (PE), poly(ethylene oxide) (PEO), poly(ε-caprolactone) (PCL), poly(L-lactide) (PLLA), and polyglycolide (PGA), with a composition optimized to allow the crystallization of all blocks. Using Differential Scanning Calorimetry, synchrotron Fourier Transform Infrared Spectroscopy, synchrotron in situ Wide-angle and Small-angle X-Ray Scattering, Transmission Electron Microscopy, and Polarized Light Optical Microscopy, we demonstrate that upon cooling from the melt, all covalently linked blocks crystallize in a well-defined sequence: PGA > PLLA > PE > PCL > PEO. During crystallization, well-developed pentacrystalline positive spherulites are produced. This unprecedented level of self-assembly reveals the potential of complex block polymers to design multifunctional crystalline materials., The support from King Abdullah University of Science and Technology (KAUST) under grant BAS/1/1342-01-01 is gratefully acknowledged and highly appreciated. This work has received funding from: the Department of Education of the Basque Government through grant no. IT1503-22, the NEFA074/01 - AcroBioPLAST project, which has been 65% co-financed by the European Union through the Interreg VI-A Spain-France-Andorra Programme (POCTEFA 2021-2027), the project PID2023-149734NB-C22 funded by MCIU/AEI/10.13039/501100011033, and the María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033. R.A.P.-C. is supported by the ADAGIO-H2020-MSCA COFUND-2020 program (101034379). The authors performed the Synchrotron radiation WAXS/SAXS experiments at BL11-NCD-SWEET and FTIR at BL-01-MIRAS beamline at the ALBA Synchrotron (Proposal Numbers 2020024169 and 2024028137, respectively). We also acknowledge the collaboration of the ALBA Synchrotron radiation facilities staff, particularly Juan Carlos Martínez Guil. V.S. acknowledges Grant CEX2023-001286-S funded by MICIU/AEI /10.13039/501100011033, PID2021-127847OB-I00, ELECMI and NANBIOSIS ICTSs., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Galvanic intercalation of molecular cations into van der Waals materials and heterostructures

  • Tezze, Daniel
  • Álvarez, Covadonga
  • Margineda, Daniel
  • Furqan, Mohammad
  • Mattioni, Samuele
  • Pereira, José Manuel
  • Ahsan, Umer
  • Mazánek, Vlastimil
  • Kumar Maurya, Yogesh
  • Abdel Aziz, Ilaria
  • Mantione, Daniele
  • Mateo-Alonso, Aurelio
  • Schiller, Frederik
  • Casanova, Félix
  • Mañas-Valero, Samuel
  • Alegría, Ángel
  • Coronado, Eugenio
  • Rivilla, Iván
  • Sofer, Zdeněk
  • Martín-Gracia, Beatriz
  • Ormaza, Maider
  • Arenal, Raúl
  • Hueso, Luis E.
  • Gobbi, Marco
The intercalation of molecular species into van der Waals (vdW) crystals is a powerful approach to combine the physical properties of vdW materials with the chemical versatility of molecules. However, its transformative promise remains underexplored, partly due to the difficulty of preserving high crystalline quality down to the few-layer limit using conventional intercalation methods. Here we present a galvanic strategy that exploits the low reduction potentials of selected metals to intercalate diverse molecular cations, including organometallic and chiral species, into both bulk vdW crystals and few-layer flakes under mild conditions, yielding 50 organic–inorganic superlattices. In addition, our method enables vertical intercalation heterostructures, where molecular cations are confined to a single component in a vdW stack, and lateral heterostructures, where two distinct molecular species are introduced into adjacent regions of the same flake. Finally, we demonstrate device-level integration of superconducting heterostructures, highlighting the prospects of galvanic intercalation for hybrid devices and emergent quantum phenomena., This work was supported under projects PID2021-128004NB-C21, PID2021-122511OB-I00, PID2024-157558NB-C22, PID2024-157558NB-C21 and PID2024-155708OB-I00, funded by Spanish MICIU/AEI/10.13039/501100011033 and by ERDF/EU, and under the María de Maeztu Units of Excellence Programme (grant no. CEX2020-001038-M). This work was supported by the FLAG-ERA grant MULTISPIN, via the Spanish MICIU/AEI and European Union NextGenerationEU/PRTR (grant no. PCI2021-122038-2A) and by the Diputación Foral de Gipuzkoa (QUANTUM, project no. 2024-QUAN-000014-01). It was also funded by the MCIN and by the European Union NextGenerationEU/PRTR-C17.I1, as well as by IKUR Strategy under the collaboration agreement between DONOSTIA INTERNATIONAL PHYSICS CENTER and NanoGune on behalf of the Department of Education of the Basque Government. B.M.-G. and M.G. acknowledge support from the ‘Ramón y Cajal’ Programme by the Spanish MICIU/AEI and EU NextGenerationEU/PRTR (grant nos. RYC2021-034836-I and RYC2021-031705-I). D.T. and C.A.-G. acknowledge the Spanish MICIU and ESF+ (grant nos. PRE2020-092992 and PRE2022-104487). Z.S. was supported by ERC-CZ programme (project LL2101) from Ministry of Education Youth and Sports of the Czech Republic (MEYS) by the project Advanced Functional Nanorobots (reg. no. CZ.02.1.01/0.0/0.0/15_003/0000444 financed by the ERDF). Z.S. also acknowledges the assistance provided by the Advanced Multiscale Materials for Key Enabling Technologies project, supported by the MEYS Project No. CZ.02.01.01/00/22_008/0004558, Co-funded by the European Union. V.M. was supported by project LUAUS23049 from Ministry of Education Youth and Sports (MEYS). I.R. thanks Ikerbasque and acknowledges support from grant nos. PID2023-151549NB-I00 and RED2022-134287-T, funded by MICIU and FEDER, EU, as well as grant no. IT-1553-22 funded by the Basque Government. M.O. acknowledges the support from the UPV/EHU research project (project no. EHU-N23/52). R.A. acknowledges funding from the Spanish MICIU with funding from European Union Next Generation EU (grant no. PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (grant nos. PID2023-151080NB-I00 and CEX2023-001286-S), as well as from the Government of Aragon (DGA) through the project no. E13-23R. The studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA), Universidad de Zaragoza, Spain. Y.K.M. acknowledges support through a María Zambrano grant from the University of the Basque Country (grant no. MAZAM21/12) funded by the Spanish MICIU the European Union NextGenerationEU. A.M.-A. acknowledges support from the Basque Science Foundation for Science (Ikerbasque), POLYMAT, the University of the Basque Country, Diputación de Guipúzcoa, Gobierno Vasco (PIBA_2024_1_0030 and BERC programme) and Gobierno de España (project nos. PID2021-124484OB-I00, PCI2022-132921, PID2024-157565NB-I00 and María de Maeztu Excellence Unit CEX2023-001303-M funded by MICIU/AEI and European Union NextGenerationEU/PRTR). This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Programme (grant agreement no. 722951). This project has received funding from the European Union under the Horizon 2020 Research and Innovation Programme (grant no. M-ERA.NET 2021, SuperSuper). This work was funded by the European Union under the Horizon Europe grant no. 101046231 (FantastiCOF). Technical and human support provided by SGIker of EHU is acknowledged., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001038-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding enhanced melt memory in poly(octamethylene carbonate)-based random copolycarbonates with mixed isodimorphic/isomorphic crystallization

  • Liao, Yilong
  • Pérez-Camargo, Ricardo A.
  • Maiz, Jon
  • Müller, Alejandro J.
Poly(hexamethylene carbonate-ran-octamethylene carbonate) (PC6/PC8), poly(heptamethylene carbonate-ran-octamethylene carbonate) (PC7/PC8), and poly(dodecamethylene-ran-octamethylene carbonate) (PC12/PC8) are the first random copolymers known to crystallize with a mixed isodimorphic and isomorphic mode. Here, we investigate for the first time how this dual crystallization mode affects melt memory. Self-nucleation experiments, combined with synchrotron X-ray scattering, polarized light microscopy, and dielectric spectroscopy, show that crystallization in the isodimorphic mode decreases melt memory as the comonomer content increases, as expected. Conversely, compositions that crystallize in the isomorphic mode, where a new crystalline phase forms that is different from the parent components or their polymorphs, display increased melt memory, with Domain IIa widths─directly related to melt memory─reaching up to 30 °C, significantly surpassing those in homopolymers. This heightened melt memory is due to stronger intermolecular interactions within the new phase, as shown by higher dielectric constants. These results establish the crucial role of intermolecular interactions within the crystal lattice in determining enhanced melt memory in copolymers showing both isodimorphic and isomorphic crystallization, highlighting the critical role of comonomer incorporation in tuning crystallization behavior and melt memory., This work has received funding from the Department of Education of the Basque Government through grant no. IT1503-22, and from the María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033. R.A.P.–C. is supported by the ADAGIO-H2020-MSCA COFUND-2020 program (101034379). J.M. acknowledges support from the “Ramón y Cajal” Program, Grant No. RYC2023-044285-I, funded by MICIU/AEI/10.13039/501100011033 and ESF+. This work was also financially supported by the Opening Project of State Key Laboratory of Advanced Polymer Materials, Sichuan University (Grant No. sklapm2025-3-07). The authors performed synchrotron radiation WAXS/SAXS experiments at BL11-NCD-SWEET (Proposal Number 2024028078) beamline at the ALBA Synchrotron with the collaboration of ALBA staff., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An insight into the monomeric isomerism in the polymerization of glycidol with B(C6F5)3: A DFT study of the initiation, propagation and cyclization steps

  • Gastearena, Xuban
  • Ruipérez, Fernando
  • Barroso-Bujans, Fabienne
  • Lam, Anabel
  • Matxain, Jon M.
Data will be made available on request., The polymerization of glycidol (Gly) using tris-(pentafluorophenyl)borane [B(C6F5)3] leads to the formation of water-soluble polymer structures with a cyclic core and hydroxyl-terminated branches. The polymerization mechanism is complex, as it involves competitive reactions between B(C6F5)3 and both the epoxide and hydroxyl groups of Gly, with two possible propagation mechanisms: the active chain end mechanism (ACEM) and the activated monomer mechanism (AMM). Additionally, polymerization occurs through a ring-expansion polymerization mechanism that allows the formation of cycles. There are many structural parameters that cannot be experimentally determined in this reaction and which can be advantageously addressed using quantum calculations. These are the probability of formation of isomeric structures L1,3 and L1,4, which is clearly linked to whether ACEM or AMM operates, but also whether the monomer attack on the active center occurs on the α- or β-carbon of the epoxide ring. This study focuses on the quantum calculations and energetics of the initiation of Gly with B(C6F5)3, first propagation step and termination by cyclization. The results indicate that the thermodynamic stability and kinetic barriers of the products resulting from α- and β-attacks on the epoxide ring, and those from the ACEM and AMM mechanisms are similar during the first propagation step. These similar reaction probabilities would result in an L1,3:L1,4 ratio of 3:1. However, the higher thermodynamic stability of cycles containing a larger number of L1,4 units qualitatively explains why the L1,3:L1,4 ratio is experimentally reduced to unity (1:1)., The authors acknowledge support from grants PID2023-148587NB-I00, funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU, María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033, Eusko Jaurlaritza (Basque Government, projects IT1820-26, IT1584-22 and PIBA_2025_1_0015) and Diputación Foral de Gipuzkoa (2025-CIE4-000051-01). X.G. is thankful for financial support from the Basque Government through Fellowship PRE_2024_2_0198. A.L. also thanks DIPC program for visitors. Technical and human support provided by IZO-SGI, SGIker (UPV/EHU, MICINN, GV/EJ, ERDF, and ESF) and by the Donostia International Physics Center (DIPC) Computer Center are gratefully acknowledged for assistance and generous allocation of computational resources., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of chain length on PCL dielectric β-relaxation: Decoupling the roles of chain ends, main chains, entanglements, and crystallinity

  • Sangroniz, Leire
  • Alegría, Ángel
  • Müller, Alejandro J.
The structure of semicrystalline polymers is quite complex due to the presence of interconnected amorphous and crystalline regions. Extended or folded chain crystals, along with entanglements and tie molecules, are formed depending on the chain length. The material’s structure determines its final performance, so understanding the impact of chain length is essential. Broadband dielectric spectroscopy is highly sensitive to the molecular dynamics of polar polymers. In this work, a systematic study of the impact of chain length on PCL’s dielectric relaxation is conducted, decoupling for the first time the role of chain length, chain ends, entanglements, and crystallinity on the β relaxation. PCL samples have been analyzed within a number-average molar mass range of 2–173 kg/mol. The results are modeled by considering the contributions of end groups, the main chain segments, and the degree of crystallinity, which effectively describes the experiments. As the chain length increases, the contribution of the amorphous main chain is altered due to entanglements that may affect the chain dynamics. Our results suggest a strong correlation between changes in the local dynamics of polymer segments and the presence of a rigid amorphous fraction in semicrystalline polymers. Overall, this study contributes to the understanding of the microstructure of semicrystalline polymers, which can be applied to other polymers. The work offers tools for utilizing broadband dielectric spectroscopy to isolate complex chain parameters., A.J.M. acknowledges support from the María de Maeztu Excellence Unit CEX2023-001303-M funded by MCIN/AEI/10.13039/501100011033 and from the project PID2023-149734NB-C22 funded by MCIN/AEI/10.13039/501100011033 and by the Department of Education of the Basque Government, grant IT1503-22. A.J.M. would also like to thank the program Interreg from the EU for funding the AcroBioPlast POCTEFA EFA74/1 project. L.S. thanks the Gipuzkoa Fellow from the Provincial Council of Gipuzkoa. A.A. acknowledges the grant IT-1566-22 by the Department of Education of the Basque Government., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How the lack of chain ends affects the melt memory of poly(ethylene oxide): cyclic versus linear chains

  • Sangroniz, Leire
  • Barroso-Bujans, Fabienne
  • Allgaier, Jürgen
  • Müller, Alejandro J.
When a semicrystalline polymer is heated to temperatures just above its melting point, some self-nuclei can survive. Depending on the temperature, these self-nuclei may be composed of self-seeds (i.e., crystal fragments that survived the melting process) or, if all crystals are melted, by regions in the melt that retain the memory of the chain conformations when they were crystalline. This last case is known as melt memory. The parameters influencing melt memory have been studied in recent years, including the role of intermolecular interactions, molar mass, and the presence of comonomers or branches. However, the influence of chain topology has only been addressed in a few studies. In this work, we investigate how chain topology affects melt memory by analyzing cyclic PEO samples spanning a wide molar mass range from 2 to 84 kg/mol and comparing these results with linear PEO samples of similar molar masses. Cyclic PEO chains lack chain ends and exhibit a lower melting temperature than their linear counterparts under non-isothermal conditions. Similarly, the crystalline lamellar thickness is smaller for cyclic chains than for linear chains. Using the self-nucleation thermal procedure, the width of the melt memory temperature range (also called DIIa) was examined. The results show that melt memory is triggered at 6 kg/mol in cyclic PEOs. DIIa then increases with molar mass until reaching a plateau at approximately 37 kg/mol. The onset of melt memory occurs at a higher critical molar mass in cyclic PEOs (6 kg/mol) than in linear PEOs (1 kg/mol) because unentangled cyclic chains adopt a more compact coil conformation and diffuse faster, enabling them to reach an isotropic melt more easily. Since cyclic chains can only entangle at significantly higher molar masses than linear chains, the typical increase in melt memory with increasing Mn beyond Me (i.e., the entanglement molar mass) also manifests at higher molar masses in cyclic chains. When chain-end effects are negligible, both cyclic and linear PEO chains display the same extent of melt memory beyond 37 kg/mol., This work has received funding from: (a) the EFA074/01 - AcroBioPLAST project, which has been 65% co-financed by the European Union through the Interreg VI-A Spain-France-Andorra Programme (POCTEFA 2021-2027), (b) the project PID2023-149734NB-C22, financed by MCIU/AEI/10.13039/501100011033 and FEDER EU, (c) the María de Maeztu Excellence Unit CEX2023-001303-M financed by MCIN/AEI/10.13039/501100011033 and (d) the project IT1820-26 financed by the Basque Government., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Can five chemically different lamellar crystals self-assemble in a single spherulite?

  • Matxinandiarena, Eider
  • Pérez-Camargo, Ricardo A.
  • Sebastián, Víctor
  • Zhang, Pengfei
  • Ladelta, Viko
  • Hadjichristidis, Nikos
  • Müller, Alejandro J.
Semicrystalline polymers with multiple crystallizable blocks provide opportunities to develop materials with hierarchical structures and customized properties, but they also pose unique challenges for understanding their crystallization. In this work, we investigate the crystallization from a miscible melt of a pentablock quintopolymer composed of five potentially crystallizable and biocompatible blocks, composed of polyethylene (PE), poly(ethylene oxide) (PEO), poly(ε-caprolactone) (PCL), poly(L-lactide) (PLLA), and polyglycolide (PGA), with a composition optimized to allow the crystallization of all blocks. Using Differential Scanning Calorimetry, synchrotron Fourier Transform Infrared Spectroscopy, synchrotron in situ Wide-angle and Small-angle X-Ray Scattering, Transmission Electron Microscopy, and Polarized Light Optical Microscopy, we demonstrate that upon cooling from the melt, all covalently linked blocks crystallize in a well-defined sequence: PGA > PLLA > PE > PCL > PEO. During crystallization, well-developed pentacrystalline positive spherulites are produced. This unprecedented level of self-assembly reveals the potential of complex block polymers to design multifunctional crystalline materials.