Pasar al contenido principal

INVESTIGACIONES NANOSCOPICAS EN 1D-2D NANOMATERIALES: DE SUS CONFIGURACIONES ATOMICAS A SUS PROPIEDADES

PID2023-151080NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 63
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The simultaneous total oxidation of toluene, propene, and CO environmental pollutants using bimetallic Au-Pt/ZrO2/UVM-7 catalysts

  • Aggett, Kieran J.
  • García Martínez, Tomás
  • Morgan, David J.
  • Peláez-Fernández, Mario
  • Mayoral, Álvaro
  • Arenal, Raúl
  • Solsona, Benjamín
  • Amorós, Pedro
  • Taylor, Stuart H.
11 figures, 4 tables., Supported precious metal catalysts, containing either mono or bimetallic Au and Pt nanoparticles, anchored on a hierarchical porous UVM-7 silica structure, were prepared and evaluated for the removal of volatile organic pollutants by oxidation. The catalysts were investigated for the simultaneous total oxidation of three model compounds: propene, toluene, and CO, commonly associated with “cold start pollutants” in automotive exhausts. Only Au showed low catalytic activity, while Pt nanoparticles were active, with a greater concentration of accessible Pt nanoparticles corresponding with increased catalytic activity. Interestingly, having both metals present on the same catalyst together was preferential for producing higher activity in the total oxidation of CO, propene, and toluene. The loadings of Pt nanoparticles on the catalyst surface, as well as the synthesis method, were important controlling factors. The order of metal loading deposition was influential, depositing Au and Pt sequentially resulted in surface enrichment of the latter deposited metal, leading to enhanced catalytic performance. When Au and Pt were loaded simultaneously, alloy formation occurred, and the surface Pt enrichment was more moderate, but still maintaining better catalytic performance compared with the pure Pt catalyst., A.M., M.P.F., and R.A. acknowledge the Spanish MICIU for funding (CEX2023-001286-S MICIU/AEI/10.13039/501100011033) as well as the regional government of Aragon (DGA E13_23R). [...]. R.A. and A.M. also acknowledge the support of the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CNS2023-144346/AEI /10.13039/501100011033, respectively). M.P.F. acknowledges the support of the Spanish MICIU (Ayudas Margarita Salas). B.S. thanks the MCIN/AEI through the project TED2021-129555B-I00/AEI/10.13039/501100011033/ Unión Europea NextGeneration EU/PRTR. P.A. thanks PID2021-126304OB-C43 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe.” T.G. would like to acknowledge the Spanish Ministry of Science, Innovation and Universities through its Mobility program for stays of senior researchers and professors in foreign countries (PRX18/00474) and the regional government of Aragon (DGA T04_20R) for funding. XPS analysis work was performed through the support of the EPSRC National Facility for X-ray photoelectron spectroscopy (‘HarwellXPS’, Grant numbers EP/Y023587/1, EP/Y023609/1, EP/Y023536/1, EP/Y023552/1, and EP/Y023544/1)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of α-Fe2O3 nanoparticles/g-C3N4 direct Z-scheme heterojunction of durable photocatalytic activity

  • Galán, Alejandro
  • Fernández-Pato, Isaías
  • Zaluzec, Nestor J.
  • Cambré, Sofie
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
The fabrication of a nanohybrid photocatalyst that combines α-Fe2O3 nanoparticles with graphitic carbon nitride (g-C3N4) is reported. The ensuing direct Z-scheme heterojunction greatly boosts the photocatalytic activity of the α-Fe2O3/g-C3N4 nanohybrids. This results in organic dye degradation rates more than two times higher than its individual components, promoted by the efficient charge separation and transfer of the Z-scheme heterojunction mechanism of the nanohybrid photocatalyst. In addition, recyclability tests show an outstanding stability of the nanohybrids spanning five consecutive dye degradation experiments, during which the degradation rate is slightly improved. The origin of the improved photocatalytic performance of the nanohybrid lies in the intimate interaction between α-Fe2O3 and g-C3N4 afforded by the two-step fabrication process, which enables the direct and controlled growth of α-Fe2O3 nanoparticles on g-C3N4. A first ultrasound impregnation step promotes the effective anchoring of stable Fe species via Fe−N and C−N/C−O bonding, while a second microwave phase conversion step induces the subsequent growth of α-Fe2O3 nanoparticles on the g-C3N4 sheets. Careful control of the FeCl3 precursor concentration up to a threshold value of 0.25 M during impregnation enables complete control over their size and phase. This approach clearly highlights the benefits of microwave reactor systems in the fabrication of hematite-based Z-scheme photocatalytic, overcoming the limitations of conventional thermal treatment technology., Funding from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well as from the Gobierno de Aragón (DGA) under projects T03_23R (Grupos de Investigación Reconocidos), is acknowledged. A.G.-G. is thankful for his Margarita Salas Postdoctoral Fellowship grant (RSU.UDC.MS21). R.A. acknowledges funding by the Spanish MICIU (PID2019-104739GB-I00/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033, and CEX2023-001286-S MICIU/AEI/10.13039/501100011033) and by DGA under project E13-23R. The work at Argonne National Laboratory (N.J.Z./R.A.) was supported by the Advanced Materials for Energy Water Systems (AMEWS) Center, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences at Argonne National Laboratory under contract DE-AC02-06CH11357, as well as in part by the National Science Foundation Major Research Instrumentation (MRI) Program (NSF DMR-2117986) at the University of Chicago. The Argonne Picoprobe AEM was developed under CRADA 1300701 between Argonne National Laboratory and Thermo Fisher Scientific Instruments. S.C. thanks the Fund for scientific research - Flanders (FWO) for infrastructure funding for the EPR equipment (I004920N)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for Fabrication of α-Fe2O3 nanoparticles/g-C3N4 direct Z-scheme heterojunction of durable photocatalytic activity [Dataset]

  • Galán, Alejandro
  • Fernández-Pato, Isaías
  • Zaluzec, Nestor J.
  • Cambré, Sofie
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
Under a Creative Commons BY 4.0 license., Detailed structural information obtained from XRD and Rietveld refinement of the hybrids, UV−vis spectra of all the as-prepared photocatalysts, FESEM images of the control and hybrid photocatalysts, schematic of the g-C3N4 cleavage and impregnation, additional XPS spectra of α-Fe2O3 NPs and α-Fe2O3/g-C3N4 hybrid, additional degradation experiments, and table comparing the photocatalytic activity of different material systems., S1. X-ray diffraction Figure S1. XRD pattern of the (1 0 0) peak of g-C3N4 and hybrid materials. Table S1. Crystallographic parameters of hematite NPs and hybrid materials. S2. UV-vis absorption spectroscopy Figure S2. UV-vis spectra of the reference and hybrid materials. S3. XPS of Fe 2p core spectra Figure S3. Fe 2p XPS spectra of α-Fe2O3 NPs and α-Fe2O3/g-C3N4 hybrid. S4. Cleavage and impregnation of g-C3N4 Figure S4. Schematic of the cleavage and impregnation process of the g-C3N4 sheets. S5. High resolution FESEM Figure S5. High-resolution FESEM micrographs of α-Fe2O3 NPs, g-C3N4 and hybrids. S6. Additional photocatalytic MB degradation results Figure S6. Effect of H2O2 and UV light on MB degradation. Figure S7. Comparison between UV and white ligh on MB degradation. Figure S8. MB degradation using different concentrations of photocatalyst. Figure S9. Comparative degradation of MB, RhB and MR. Figure S10. XRD analysis of the photocatalyst after recycling experiment. Figure S11. UV-vis spectra of time-dependent MB degradation. S7. Comparative table Table S2. Comparison of the photocatalytic activity and degradation time employing different material systems and experimental conditions. S8. References., Funding from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well as from the Gobierno de Aragón (DGA) under projects T03_23R (Grupos de Investigación Reconocidos), is acknowledged. A.G.-G. is thankful for his Margarita Salas Postdoctoral Fellowship grant (RSU.UDC.MS21). R.A. acknowledges funding by the Spanish MICIU (PID2019-104739GB-I00/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033, and CEX2023-001286-S MICIU/AEI/10.13039/501100011033) and by DGA under project E13-23R. The work at Argonne National Laboratory (N.J.Z./R.A.) was supported by the Advanced Materials for Energy Water Systems (AMEWS) Center, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences at Argonne National Laboratory under contract DE-AC02-06CH11357, as well as in part by the National Science Foundation Major Research Instrumentation (MRI) Program (NSF DMR-2117986) at the University of Chicago. The Argonne Picoprobe AEM was developed under CRADA 1300701 between Argonne National Laboratory and Thermo Fisher Scientific Instruments. S.C. thanks the Fund for scientific research - Flanders (FWO) for infrastructure funding for the EPR equipment (I004920N)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene-modified g-C3N4/ α-Fe2O3 systems for light-induced hydrogen generation

  • Touati, Wassila
  • Edelmannová, Miroslava Filip
  • Karmaoui, Mohamed
  • Bekka, Ahmed
  • Furgeaud, Clarisse
  • Chakib, Alaoui
  • Allah, Imene kadi
  • Figueiredo, Bruno
  • Labrincha, J. A.
  • Arenal, Raúl
  • Koci, Kamila
  • Tobaldi, David Maria
Photocatalysis represents an advanced and efficient technology for harnessing light energy. The non-toxicity, affordability, and versatility of this technique render it particularly attractive for hydrogen production via water splitting. Nevertheless, the primary challenge lies in identifying materials capable of efficiently catalyzing the water splitting reaction upon exposure to light. This study presents the influence of the quantity of hematite and graphene on g-C3N4 in the context of hydrogen generation from methanol-water decomposition under UVC irradiation. Pure g-C3N4 exhibits the highest hydrogen generation efficiency. However, adding hematite decreases photocatalytic efficiency, likely due to the formation of a type II heterojunction between α-Fe2O3 and g-C3N4, which reduces the overall reduction capacity of the system. While incorporating graphene into the g-C3N4/α-Fe2O3 system enhances photocatalytic efficiency by improving electron mobility and prolonging the lifetime of photo-generated excitons, the highest yield was achieved with BUF10/GNP0.5. This research offers valuable insights into charge transfer and separation processes for photo-generated excitons within the g-C3N4/α-Fe2O3 and g-C3N4/α-Fe2O3/graphene systems in the context of light-induced hydrogen production., We would like to express our gratitude to the Algerian Ministry of Higher Education and Scientific Research for funding Wassila Touati's visit to the University of Aveiro, through the National Exceptional Scholarship Program (PNE). R.A. gratefully acknowledges the support from the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI /10.13039/501100011033) and by the DGA project E13-23R. The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. Kamila Kočí is thankful to the Large Research Infrastructure ENREGAT (project No LM2023056). This work was partly developed within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020 & LA/P/0006/2020, financed by national funds through the FCT/MCTES (PIDDAC). This work was partly supported by the Italian Ministry of Research (MUR) in the framework of the National Recovery and Resilience Plan (NRRP), funded by the European Union – NextGenerationEU, M4C2, within the NRRP project NFFA-DI, CUP B53C22004310006, IR0000015. “I-PHOQS” Grant (CUP B53C22001750006) and under the complementary actions to the NRRP, “Fit4MedRob” Grant (PNC0000007, CUP B53C22006960001) and “ANTHEM” Grant (PNC0000003, CUP B53C22006710001), funded by NextGenerationEU., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure and properties of tubular structures based on the quaternary misfit layered compound Sm1−xYxS-TaS2

  • Hettler, Simon
  • Furqan, Mohammad
  • Sreedhara, M. B.
  • Khadiev, Azat
  • Tenne, Reshef
  • Arenal, Raúl
Misfit layered compounds (MLCs) are incommensurate super-lattices made up of two repeating subunits and are promising for different applications due to the possibility of a synergetic combination of the properties of the employed sublayers. A means of fine-tuning a specific MLC is to alloy one of the elements in the system. In this study, quaternary MLCs made of Sm1−xYxS–TaS2 were successfully synthesized and the resulting structures were characterized in detail, with a specific focus on tubular structures. Owing to the small difference between the ionic radii of Sm and Y, the structure of the quaternary MLCs follows the one of pristine SmS–TaS2, irrespective of the degree of alloying and with an anisotropic change of the lattice parameters up to a maximum of 2.7%. Nevertheless, microscopy, spectroscopy, and diffraction techniques allow us to reveal the impact of the composition on important characteristics of the MLC. Notably, for a specific composition, the ratio between the lattice parameters of the two subsystems adopts a value of 3 to 5, which could lead to a transition toward a commensurate superstructure., R. A. acknowledges funding from the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033), from the Government of Aragon (project DGA E13-23R), from MICIU with funding from EU Next-Generation (PRTR-C17.I1) promoted by the DGA and support from the ‘Severo Ochoa’ Programme for Centres of 758 Excellence in R&D of the Spanish MICIU (CEX2023-759 001286-S MICIU/AEI/10.13039/501100011033). The TEM and XRD analyses were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Universidad de Zaragoza (Spain). The authors thank G. Antorrena (LMA) and I. Echaniz (INMA) for help with lab-based XRD and Raman acquisition, respectively. RT acknowledges the support of the estate of Manfred Hecht and the estate of Diane Recanati and The Harold Perlman Family Foundation. The authors acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of experimental facilities. Parts of this research were carried out at DESY P23 “In situ X-ray diffraction and imaging beamline”. Beamtime was allocated for proposal 20010090., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-759 001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward quantitative thermoelectric characterization of (nano)materials by in-situ transmission electron microscopy

  • Hettler, Simon
  • Furqan, Mohammad
  • Sotelo, Andres
  • Arenal, Raúl
We explore the possibility to perform an in-situ transmission electron microscopy (TEM) thermoelectric characterization of materials. A differential heating element on a custom in-situ TEM microchip allows to generate a temperature gradient across the studied materials, which are simultaneously measured electrically. A thermovoltage was induced in all studied devices, whose sign corresponds to the sign of the Seebeck coefficient of the tested materials. The results indicate that in-situ thermoelectric TEM studies can help to profoundly understand fundamental aspects of thermoelectricity, which is exemplary demonstrated by tracking the thermovoltage during in-situ crystallization of an amorphous Ge thin film. We propose an improved in-situ TEM microchip design, which should facilitate a full quantitative measurement of the induced temperature gradient, the electrical and thermal conductivities, as well as the Seebeck coefficient. The benefit of the in-situ approach is the possibility to directly correlate the thermoelectric properties with the structure and chemical composition of the entire studied device down to the atomic level, including grain boundaries, dopants or crystal defects, and to trace its dynamic evolution upon heating or during the application of electrical currents., The authors acknowledge funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 889546, the Government of Aragon (DGA) through the project E13_23R, the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (PID2019-104739GB-100/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI 10.13039/501100011033). The microscopy works have been conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza. Sample courtesy (MLC NT) from MB Sreedhara and R. Tenne (MLC NT, Weizmann Institute of Science, Israel) is acknowledged. The authors thank M. Rengifo (INMA, CSIC-Universidad de Zaragoza) for discussions about electrical characterizations, P. Strichovanek (INMA, CSIC-Universidad de Zaragoza) for Ti-Pt sputter deposition, R. Valero (LMA, Universidad de Zaragoza) for support with MEMS and Ge thin-film fabrication and N. Navascues (INMA, CSIC-Universidad de Zaragoza) for support with Raman acquisition., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemistry and interfacial structure promoting quasi-van der Waals epitaxial growth of WS2 nanosheets on sapphire for prospective application in field-effect transistors

  • Majumder, Supriyo
  • Shinde, Nitin
  • Cavin, John
  • Chen, Chen
  • Dey, Arka Bikash
  • Narayanachari, K. V. L. V.
  • Zhang, Jiaqi
  • Garcia-Wetten, David
  • Dieguez, Oswaldo
  • Hettler, Simon
  • Cohen, Assael
  • Keane, Denis T.
  • Arenal, Raúl
  • Rondinelli, James M.
  • Ismach, Ariel
  • Bedzyk, Michael
How do chemical and structural modifications to the supporting crystal surface affect the subsequent van der Waals (vdW) or quasi(Q)-vdW epitaxial growth of 2D nanocrystals? Developing an atomic-scale picture of such an interfacial system is crucial for understanding its impact on the physical and chemical properties of the supported 2D materials. The elucidation of the interfacial structure and chemistry needed to promote the Q-vdW epitaxial growth of 2D tungsten disulfide (WS2) nanocrystals contributes to the growth mechanism understanding, thus pushing forward the integration of such atomically thin semiconductors toward real field-effect transistor applications. In addition to an atomic-force microscopy top view, we showcase a combination of X-ray techniques for a top-to-bottom investigation of the complexities of the buried interface structures. This approach uses X-ray photoelectron spectroscopy, X-ray standing wave excited X-ray fluorescence, and crystal truncation rod scattering to produce a highly resolved chemical-state-specific 3D atomic map for the extended interface structure of WS2/α-Al2O3(001). Employing these detailed analysis methods, along with density functional theory to further refine the picoscale structure, we demonstrate how two different types of interface engineering during the pregrowth stage lead to significant differences in the chemical and structural modifications to the terminal surface of c-face sapphire, which in turn leads to substantial differences in the submonolayer growth of supported WS2 2D nanocrystals in terms of lateral domain sizes, epitaxial registry, vdW gaps, and stability., This work was supported by DOE/BES Award No. DE-SC0023450 to the Hydrogen in Energy and Information Sciences EFRC at Northwestern University (NU). D.G. was supported by DOE contract no. DEAC02-07CH11359 to the Superconducting Quantum Materials and Systems Center. The 5ID-C DNDCAT beamline at the Advanced Photon Source (APS) was used for XSW measurements. The APS, an Office of Science User Facility operated for DOE by Argonne National Laboratory, is supported by DOE under Contract DE-AC0206CH11357. The P08 beamline at PETRA III Deutsches Elektronen-Synchrotron (DESY), a member of the Helmholtz Association HGF, was used for CTR measurements. This work also made use of the XRD, and Keck-II XPS facilities at NU supported by the MRSEC program (NSF DMR-2308691), Keck Foundation, State of Illinois, and the Soft and Hybrid Nanotechnology Experimental (SHyNE) Resource (NSF ECCS-2025633). Sample T was grown at Tel Aviv University, N.S., and A.I. acknowledge the generous support from the Israel Science Foundation, grant # 2596/21. Sample P was grown in the 2D Crystal Consortium Materials Innovation Platform (2DCC-MIP) facility at Penn State, which is supported by the National Science Foundation (NSF) under NSF cooperative agreement NSF DMR-2039351. S.M. and M.B. thank Paul Fenter (Argonne National Lab), Joanne Stubbs (University of Chicago), and Peter Eng (University of Chicago) for helpful discussions on CTR data analysis. R.A. acknowledges funding from the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI/10.13039/501100011033) and by the MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon (DGA) as well from the DGA project E13-23R. The STEM studies have been conducted at the Laboratorio de Microscopias Avanzadas (LMA), Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Proximity-mediated multi-ferroelectric coupling in highly strained EuO-graphene heterostructures

  • Pandey, Satakshi
  • Pin, Thomas
  • Hettler, Simon
  • Arenal, Raúl
  • Bouillet, Corinne
  • Maroutian, Thomas
  • Robert, Jérôme
  • Gobaut, Benoit
  • Kundys, Bohdan
  • Dayen, Jean-François
  • Halley, David
2D van der Waals materials and their heterostructures are a fantastic playground to explore emergent phenomena arising from electronic quantum hybridization effects. In the last decade, the spin-dependant hybridization effect pushed this frontier further introducing the magnetic proximity effect as a promising tool for spintronic applications. Here the uncharted proximity-controlled magnetoelectric effect in EuO/graphene heterostructure is unveiled. This is obtained while creating a new multiferroic hybrid heterostructure with multifunctional properties. Using a topotactic method magnetic insulating EuO thin films on graphene is grown under high compressive strain, which induces the appearance of an additional ferroelectric order, with an electric polarization that reaches up to 18 µC cm-2 at room temperature. This observation therefore quantitatively confirms the theoretical predictions made 15 years ago of a strain-induced ferroelectric state in EuO. Moreover, the EuO induces a magnetic proximity state into the graphene layer by interfacial hybridization. This new ferroelectric state in the EuO/graphene heterostructure is stable up to room temperature where it coexists with the EuO/graphene magnetic state. Furthermore, intertwined magneto-electric effects are shown in these strained heterostructures which can facilitate the manipulation of magnetization and electric polarization in future memory and neuromorphic devices., The authors thank the STnano clean room facility and the XRD platform of IPCMS for technical support as well as the Labex NIE for partial support. R.A. and S.H. acknowledge funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement number 889546, the Government of Aragon (DGA) through the project E13 23R, the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (PID2019-104739GB-100/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI /10.13039/501100011033). This study was supported by French state funds managed by the ANR more specifically within the grants MixDferro (ANR-21-CE09-0029) and 2DSwitch (ANR-21-CE09-0031). J.-F.D. also acknowledges a Junior grant from Institut Universitaire de France., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vanadium incorporation in ferrite nanoparticles serves as an electron buffer and anisotropy tuner in catalytic and hyperthermia applications

  • Torres, Teobaldo E.
  • Valdés, Daniela Paola
  • Hettler, Simon
  • Nuñez, Jorge M.
  • Rodrigo, I.
  • Orue, Iñaki
  • García, J. Á.
  • Plazaola, F.
  • Zysler, Roberto Daniel
  • Lima Jr., Enio
  • Aguirre, Myriam H.
  • Goya, Gerardo F.
  • Arenal, Raúl
Cancer research has gradually shifted its focus from individual therapies to a combination of them for enhanced treatment effectiveness. In particular, the increased interest in the field of catalytic medicine through nanozymes proposes promising combinations with photothermal therapy, photodynamic therapy, and magnetic fluid hyperthermia (MFH). Nanozyme activity centers around the hydroxyl radical ˙OH, the most toxic of the reactive oxygen species (ROS). With a synergistic approach in mind, we studied VxFe3−xO4 magnetic nanoparticles (MNPs) as agents for ROS production and heating. These MNPs were exhaustively characterised both morphologically and magnetically. A compositional analysis through electron microscopy and spectroscopy unveils a core–shell structure with a V-rich shell. A study of the power absorption of these MNPs fixed into a gel matrix, emulating cytosol viscosity, provides values of up to 1000 W g−1 for samples with 0.5 wt% MNPs, an AC magnetic field amplitude of 65 mT and a frequency of 350 kHz, typical in the MFH application. A concentration of the ˙OH-adduct of up to 2300 nM has been measured through electron spin resonance analysis as a result of peroxidase-like activity. Through the comparison with similarly-sized ferrite MNPs, we determined that V incorporation lowers the magnetic anisotropy and serves as an electron buffer, explaining the enhanced MFH and ROS-production results., T. E. T. acknowledges funding from the European Union's Horizon Europe Research and Innovation program under the Marie Sklodowska-Curie grant agreement no. 101068591. D. P. V. and J. M. N. thank CONICET-Argentina for their doctoral fellowships. The authors acknowledge funding from projects H2020-MSCA-RISE-2021 ULTIMATE-I project no. 101007825 and H2020-MSCA-RISE-2020 101007629-NESTOR and Basque Government grant no. IT-1005-16. G. F. G. acknowledges the Spanish MICIU PID2019-106947RB-C21/AEI/10.13039/501100011033. R. A. acknowledges the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI/10.13039/501100011033), the U. Zaragoza (14446-UZ2023-CIE-02) and the DGA project E13-23R.TEM and XPS studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA), U. Zaragoza, Spain., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

B/N-doped carbon nano-onions as nanocarriers for targeted breast cancer therapy

  • Mohan, Hugh
  • Salaroglio, Iris Chiara
  • Bartkowski, Michał
  • Courtney, Kellyjean
  • Andreana, Ilaria
  • Limongi, Tania
  • Arenal, Raúl
  • Riganti, Chiara
  • Arpicco, Silvia
  • Giordani, Silvia
Cancer is one of the leading causes of death worldwide and represents a significant burden on global health systems. Many existing chemotherapy treatments come with severe side effects, ranging from hair loss to cardiotoxicity, and many types of cancer express chemotherapy resistance, such as triple-negative breast cancer. This study presents a novel boron/nitrogen-doped carbon nano-onion (BN-CNO) based nanocarrier system that can deliver doxorubicin (DOX) to cancer cells via a pH-dependent drug release mechanism. The nanocarrier formulation consists of a hyaluronic acid/phospholipid conjugate (HA-DMPE) that is non-covalently bound to the BN-CNOs upon which DOX is loaded via π–π stacking interactions. The HA-DMPE/BN-CNO/DOX system enhances the uptake and anticancer effects of DOX in MDA-MB-468 and MDA-MB-231 TNBC cells whilst reducing the cardiotoxicity of DOX in AC-16 human cardiomyocytes., This work was supported by Science Foundation Ireland (22/FFP-A/11067). Financial support from the Irish Research Council (GOIPG/2021/210 to H. M.), from the School of Chemical Sciences (SCS) at DCU (research assistantship to K. C.), from the Italian Ministry of University and Research (PRIN 2022ZBZFX3 to S. A. and C. R.) and from the Italian Association for Cancer Research (IG29250 to C. R.) are gratefully acknowledged. R. A. acknowledges funding from the Government of Aragon (DGA) through the project E13_23R, the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (PID2019-104739GB-100/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI 10.13039/501100011033). The TEM and XPS works were conducted in the Laboratorio de Microscopias Avanzadas (LMA) at the Universidad de Zaragoza. AFM and UV-vis absorption spectroscopy was performed in the Nano Research Facility (NRF) in DCU. DLS, ZP, and FTIR spectroscopy was performed at the SCS, DCU. This article is based upon work from COST Action CA21126 - Carbon molecular nanostructures in space (NanoSpace), supported by COST (European Cooperation in Science and Technology)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct visualization of temperature-induced phase separation of completely miscible Au─Pd alloy by in situ TEM

  • Roy, Abhijit
  • Hettler, Simon
  • Arenal, Raúl
In situ transmission electron microscopy (TEM) studies reveal key insights into the structural and chemical evolution of nanoparticles (NPs) under external stimuli like heating and biasing, which is critical for evaluating their suitability in chemical reactions and their tendency toward forming novel NP systems. In this study, starting from a core@shell Au nanotriangle (AuNT)@Pd nanostructure, the formation of a phase-separated bi-metallic Au─Pd NP system at high temperature is reported, despite the fact that Au and Pd are miscible in the entire composition and temperature range. In situ TEM heating of bare AuNT@Pd core@shell structures up to 1000 °C is performed. Between 400 and 800 °C, an initial alloy formation is observed. Notably, higher initial loading of Pd increases the melting temperature of the bi-metallic system. However, the most important observation is the separation of the nanostructure into Au and Pd phases at temperatures above 850 °C for high Pd doping. The extent of Pd separation depends on the amount of initial Pd loading. A Janus Au─Pd nanostructure is formed at the end of the thermal treatments at 1000 °C. The phase-separated NP is observed to be highly stable and could be clearly beneficial for various applications, particularly in catalytic processes., This work was supported by funding from the EU Horizon 2020 programme (MSCA: GA No. 101109165), the Spanish MICIU (PID2019-104739GB-100/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033, and CEX2023-001286-S MICIU/AEI /10.13039/501100011033), and by the DGA project E13-23R., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Near-infrared light-accelerated bioorthogonal drug uncaging and photothermal ablation by anisotropic Pd@Au plasmonic nanorods

  • Ortega-Liébana, M. Carmen
  • Travnickova, Jana
  • Adam, Catherine
  • González-Calderón, Davir
  • Lorente-Macías, Álvaro
  • Lochenie, Charles
  • Arenal, Raúl
  • Patton, E. Elizabeth
  • Unciti-Broceta, Asier
Selective activation of chemotherapeutics at the tumor site via bioorthogonal catalysis is a promising strategy to reduce collateral damage to healthy tissues and organs. Despite significant advances in this field, targeted drug activation by transition-metal catalysts is still limited by insufficient spatiotemporal control over the metal-mediated uncaging process. Herein, we report the development of anisotropic Pd@Au plasmonic nanorods with the capacity to accelerate dealkylation reactions under near-infrared (NIR) irradiation, thereby enabling precise control over when and where these catalytic devices are switched on. We also show that the stability and in cellulo chemical properties of Pd@Au nanorods are enhanced by Au–S functionalization with PEGylated phospholipids and report the development of a novel masking group for prodyes and prodrugs: the POxOC group, designed to improve physicochemical properties and the rate of the Pd-triggered dye/drug release process. NIR-photoactivation of lipo-Pd@Au nanorods is able to catalyze the uncaging of inactive drug precursors and release heat to the environment, killing cancer cells in culture and xenografted in zebrafish. This work provides a novel targeted strategy for photothermal chemotherapy by NIR-laser focalization., We are grateful to the EC (H2020-MSCA–IF–2018–841990) and EPSRC (EP/S010289/1, EP/Y024540/1) for financial support. E.E.P. is funded by the MRC (MC_UU_00035/13), Melanoma Research Alliance, and Rosetrees Trust (MRA Awards 687306, 917226). This work was supported by the Cancer Research UK Scotland Centre (CTRQQR-2021\100006). M.C.O.L. is grateful to the Institute of Genetics and Cancer (IGC) for financial support through the Hastie Career Advancement Fund 2020 and to “La Caixa” Foundation (ID 100010434) for fellowship funding (142167) and to MCIN/AEI/10.13039/501100011033 for research funding (grant PID2023–147912OA-I00). (S)TEM characterization (FEI-Titan) was supported by EU H2020 (grant agreement no. 823717–ESTEEM3). R.A. acknowledges funding from the Spanish MICIU (PID2023–151080NB-I00/AEI/10.13039/501100011033 and CEX2023–001286-S MICIU/AEI/10.13039/501100011033) and by the DGA project E13–23R., Funding for open access charge: Universidad de Granada/CBUA., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the relationship between oxygen K edge fine structure and cobalt/nickel content in magnetite-based core-shell nanoparticles

  • Hettler, Simon
  • Arenal, Raúl
Iron oxide nanoparticles (NPs) are used in a broad range of applications and offer the possibility of fine tuning their properties by forming hybrid core-shell structures. Scanning transmission electron microscopy (STEM) combined with electron energy loss spectroscopy (EELS) is frequently used to study such NPs at the local scale. Specifically, the energy loss near edge structure (ELNES) provides rich information on the local chemistry. Here, the dependence between the ELNES signal of the oxygen K edge and the incorporation of cobalt and nickel into the shell of magnetite NPs is investigated quantitatively using an intensity ratio between specific energy windows of the O-K edge. The analysis shows that both the local and global cobalt and nickel content of a NP influence this relationship. In addition, the overlap between the Fe-L1 and Ni-L2,3 edges is studied, the impact of a supporting film on the ELNES analysis is discussed, and the importance of a clean sample preparation is demonstrated., We acknowledge the support from the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon as well as from the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI /10.13039/501100011033) and the Government of Aragon (DGA) through the project E13 23R., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase stability and structural evolution of core/shell iron oxide nanoparticles due to oxidative diffusion: Implications for spintronic application

  • Nuñez, Jorge M.
  • Lima Jr., Enio
  • Lohr, Javier
  • Vásquez Mansilla, Marcelo
  • Zysler, Roberto Daniel
  • Tolley, Alfredo
  • Bartolomé, Fernando
  • Rubín, Javier
  • Hettler, Simon
  • Arenal, Raúl
  • Aguirre, Myriam H.
  • Winkler, Elin L.
Core/shell iron oxide nanoparticles are promising candidates for spintronic applications due to their tunable magnetic properties and interfacial exchange interactions that allow the modulation of spin-polarized conduction. However, their performance depends critically on phase stability and structural integrity under fabrication and operating conditions involving thermal and oxidative diffusion. This study examines the transformation of iron oxide nanoparticles induced by oxidative diffusion in thermal annealing from wüstite to hematite through an intermediate (wüstite)-core/(magnetite–maghemite)-shell structure. The nanoparticles exhibit a rounded cubic morphology, with a distorted C2/m FeO phase at the core under compressive strain along (010), while the Fe3O4 shell exhibits tensile strain along (110). Oxygen diffusion occurs preferentially along [100] from the cube faces, influencing shape evolution. The system exhibits an exchange bias field of up to 3 kOe and enhanced magnetic hardening of up to 4 kOe, attributed to interfacial exchange interactions. Higher annealing temperature promotes the formation of γ-Fe2O3 with ordered vacancies. The exchange bias effect persists, even when the FeO core is smaller than 1 nm in size, indicating that the strain stabilizes the antiferromagnetic (AFM) order and enhances core/shell magnetic coupling. As oxidation proceeds, strain is gradually relaxed, and at 873 K, the oxidation to hematite is promoted, characterized by a Morin transition at 245 K. These findings reveal the intricate relationship between oxidation-driven structural evolution and magnetic behavior in engineered nanoparticle systems, underscoring the critical importance of material selection tailored to specific fabrication processes, operating conditions, and device performance requirements., The authors also gratefully acknowledge the European Commission for the financial support under the H2020-MSCA-RISE-2020 (NESTOR) PROJECT No 101007629, H2020-MSCA-RISE-2020 (ULTIMATE-I) Project No 101007825 and H2020-MSCA-RISE-2019 (MELON) Project No 872631. R.A. and S.H. acknowledge the funding by the Gobierno de Aragón (DGA) under project E13-23R and by the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033, and CEX2023-001286-S MICIU/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Terpyridine-functionalized single-walled carbon nanotubes towards selectivity in the oxygen reduction reaction

  • Sideri, Ioanna K.
  • Arenal, Raúl
  • Tagmatarchis, Nikos
This article is part of the themed collection: Carbon nanoarchitectonics for advanced applications in energy, environment and bio., Single-walled carbon nanotubes (SWCNTs) have been widely employed as electrocatalysts due to their exceptional mechanical strength and electronic properties, despite lacking intrinsic catalytic centers. Current research efforts focus on enhancing their catalytic activity by modifying them with organometallic chelate complexes, to achieve controlled molecular-level structuring and improved performance in Proton Exchange Membrane Fuel Cells (PEMFCs). While the mechanistic understanding of their electrocatalytic behavior in relation to molecular structure remains in its early stages, it offers valuable insights for the development of efficient electrocatalysts. In this study, SWCNTs were stepwise chemically modified with terpyridine ligands both in the absence of metal and in the presence of ruthenium (Ru) in two different oxidation states. The resulting SWCNT-based nanomaterials were characterized using Raman, UV-Vis, XPS and energy-dispersive X-ray spectroscopy (EDS) coupled with transmission electron microscopy (TEM) imaging, while the degree of functionalization was assessed through thermogravimetric analysis (TGA). A comprehensive electrocatalytic investigation demonstrated how covalent modification with Ru2+ and Ru3+ terpyridine complexes influences the mechanistic pathway of the oxygen reduction reaction (ORR). This comparative analysis underscores the critical role of the first coordination sphere of precious metals in both the thermodynamics and kinetics of ORR, when anchored onto carbon nanomaterial lattices, providing valuable insights for the nanostructured design of efficient carbon-based electrocatalysts., This project is funded by the European Union under the Grant Agreement 101084131. R. A. acknowledges funding from the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI/10.13039/501100011033), as well as from the Government of Aragon (DGA) through the project E13 23R., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two-dimensional polycyclodextrins for strong multivalent host-guest interactions at biointerfaces

  • Beyranvand, Siamak
  • Fardin Gholami, Mohammad
  • Arenal, Raúl
  • Rabe, Jürgen P.
  • Nickl, Philip
  • ALL, Angelo H.
  • Adeli, Mohsen
et al., While 2D polymers with aromatic backbones have been increasingly receiving interest from various scientific disciplines, their nonaromatic counterparts are less investigated. In this work, 2D poly(β-cyclodextrin)s (2D-CDs) with few hundred nanometers to millimeters lateral sizes and 0.7 nm thickness are synthesized using graphene and boron nitride as colloidal templates and used for multivalent host-guest interactions with biological systems. Deposition of cyclodextrins on graphene and boron nitride templates followed by lateral crosslinking and template detachment resulted in 2D-CDs with different physicochemical properties. The size of the 2D-CDs is dominated by noncovalent interactions between cyclodextrins and templates. While an interaction energy of −224.3 kJ mol−1 at the interface between graphene and cyclodextrin led to few hundred nanometer 2D-CDs, boron nitride with weaker interactions (−179.4 kJ mol−1) resulted in polymers with millimeters lateral sizes. The secondary hydroxyl groups of 2D-CDs are changed to sodium sulfate, and 2D polymers with the ability of simultaneous host-guest and electrostatic interactions with biosystems including vessel plaques and herpes simplex virus (HSV) are obtained. The sulfated 2D-CDs (2D-CDSs) show a high ability for virus binding (IC50 = 6 µg mL−1). Owing to their carbohydrate backbone, 2D-CDs are novel heparin mimetics that can be formulated for efficient inhibition of viral infections., The authors would like to thank the Iran Science Elites Federation and Iran National Science Foundation (Project Number 4001281) for the financial support and the Core Facility BioSupraMol for advanced characterizations. The authors would like to thank Dr. Jörg Radnik and M. Eng. Jörg Stockmann from BAM 6.1 for their support with XP data acquisition. I.D. acknowledges the Federal Ministry of Education and Research (BMBF) in the framework of NanoMatFutur (PathoBlock) for financial support (project number 13XP5191). The authors further thank for support from the SupraFAB research building realized with funds from the federal government and the city of Berlin. The authors would like to thank Dr. Jakob Trimpert and Prof. Dr. Nikolaus Osterrieder from Freie Universität Berlin for providing HSV-1-GFP samples. R.A. acknowledges funding from the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI /10.13039/501100011033) and by the DGA project E13-23R. The HRTEM and some of the STEM studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA), U. Zaragoza, Spain. Dr. Mohammad Fardin Gholami and Prof. Dr. Jürgen P. Rabe acknowledge the support of the Cluster of Excellence “Matters of Activity. Image Space Material” funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany's Excellence Strategy—EXC 2025–390648296. Angelo H. ALL would like to thank the General Research Fund of Hong Kong (Project Number 12100121) for the financial support. Z, Open access funding enabled and organized by Projekt DEAL., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced plasma-assisted CO2 methanation on Ru/CeO2 catalysts

  • Musig, Beatrice
  • Barauna, Jairo
  • Roy, Abhijit
  • Arenal, Raúl
  • Gálvez Parruca, María Elena
  • García Martínez, Tomás
  • Murillo Villuendas, Ramón
  • Navarro López, María Victoria
12 figures, 2 tables., Methanation process utilizes CO₂ as a carbon feedstock for synthesizing energy carriers and value-added chemicals. The combination of methanation with plasma-catalysis has emerged as a promising avenue for the electrification of power-to-gas technologies, representing a significant development in the transition to sustainable energy systems. The present study investigates the impact of low 5 % mol Ru loading on CeO2, focusing in the role of the metal in comparison to Ni and the metal-support interactions examined using CeO2 with different structures (nanoneedles, nanopowder) and Ru dispersion within the support. The catalyst Ru/NN with nanoneedles of ceria achieved CO₂ conversion of 70 % and CH₄ selectivity of 99 % at 1CO₂/4H₂, WHSV of 30 L h−1 gcat-1, 12 kgCO2 kgcat-1 h−1 and plasma input power of 8.9 W. The enhanced plasma-catalytic activity of Ru/NN can be attributed to the increased effective H2 dissociation, beneficial physicochemical and electrical properties attributed to the choice of support and optimal metal-support interaction. The lower dielectric capacitance calculated for this catalyst is the result of reduced charge storage and a faster response to the applied electric field. This produces less intense microdischarges and a more stable and uniform plasma environment., This work was supported by the Departamento de Ciencia, Universidad y Sociedad del Conocimiento of the Gobierno de Aragón [Project no. LMP151_21]. R.A. acknowledges funding from the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI /10.13039/501100011033) as well from the Gobierno de Aragón (DGA) under Project E13-23R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unraveling the decomposition pathways of LaS-TaS2 misfit-layered compound nanostructures under extreme electrical currents by in situ TEM

  • Hettler, Simon
  • Sreedhara, M. B.
  • Tenne, Reshef
  • Arenal, Raúl
Nanostructures of the misfit-layered compound (MLC) LaS-TaS2 are brought to breakdown by application of high electrical currents within a transmission electron microscope. Imaging, diffraction, and spectroscopy techniques are employed to study their decomposition process and the resulting structures. The main decomposition route is the breakdown of the TaS2 layers, which induces the formation of metallic Ta on the surface of the nanostructures when the critical current density is surpassed. This observation confirms the assumption that TaS2 is the current-carrying layer in these types of MLCs. The different behavior of tubular 1D and 2D structures is revealed, and a metallic glass phase made of La, Ta, and S could be observed upon exceeding a threshold current. The work shows how in situ transmission electron microscopy can help understand the breakdown mechanism of electrical devices or connectors., SH and RA acknowledge funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 889546, from the Spanish MICIU ((PID2023-151080NB-I00/AEI/10.13039/501100011033), from the Spanish MICIU with funding from European Union Next Generation EU(PRTR-C17.I1) promoted by the Government of Aragon as well as from the “Severo Ochoa” Programme for Centres of 758 Excellence in R&D of the Spanish MICIU (CEX2023-759 001286-S MICIU/AEI/10.13039/501100011033) and the Government of Aragon (DGA) through the project E13 23R. RT acknowledges the support of the Estate of Manfred Hecht and the Estate of Diane Recanati and the Perlman family foundation. The microscopy and spectroscopy works have been conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza. The authors thank I. Echaniz and N. Navascuez (INMA) for help with Raman spectra acquisition., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling temperature-driven phase separation of completely miscible Au-Pd alloys: An in-situ TEM insights

  • Roy, Abhijit
  • Hettler, Simon
  • Arenal, Raúl
Proceedings., This work was supported by funding from the EU Horizon 2020 programme (MSCA: GA No.101109165), the Spanish MICIU (PID2019-104739GB-100/AEI/10.13039/501100011033, PID2023-151080NB-100/AEI/10.13039/501100011033, and CEX2023-001286-S MICIU/AEI/10.13039/501100011033), and by the DGA project E13-23R. The National Centre for Electron Microscopy (ELECMI, Spanish National Singular Scientific and Technological Facility, MICIU) is also acknowledged for provision of access to corrected aberration microscopy facilities through ELECMI Competitive Open Access Protocol (Project No: Elecmi 463). The studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA), U. Zaragoza, Spain., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of mild microwave irradiation in liquid-phase graphene oxide reduction toward aqueous dispersions and conductive films

  • Benito, Ana M.
  • Galán, Alejandro
  • Arenal, Raúl
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
8 figures, 3 tables., The scalable and sustainable production of high-quality, solution-processable graphene materials remains a central challenge in nanomaterial research. This study investigates the reduction of graphene oxide (GO) in aqueous dispersions using low-power microwave (MW) irradiation and conventional thermal reflux, comparing four common chemical reductants, ascorbic acid, glucose, hydrazine, and sodium borohydride, alongside a reductant-free route. MW irradiation at 200 W induces rapid deoxygenation and enhancement of sp2-domain signatures within seconds, whereas reflux requires extended heating to achieve comparable effects. XPS and Raman analyses reveal that MW treatment promotes a more uniform reduction across reductants and leads to significantly larger apparent crystallite sizes (La) than reflux. Importantly, although chemical reductants remain active under MW conditions, their influence on structural reorganization and electrical performance is considerably diminished, demonstrating that MW field itself governs defect elimination and sp2-domain enrichment under these mild aqueous conditions. The reductant-free MW route yields the highest conductivity (88.4 S/m for 150 nm films) and the largest sp2-domains among all samples. Combined spectroscopic, electrical, and electronic microscopy evidence supports a mechanism in which MW irradiation selectively removes highly defective, oxygen-rich, and sp3-hybridized regions rather than reconstructing the graphene lattice, thereby enriching the remaining framework in extended sp2 networks. Overall, these results position mild MW irradiation as a rapid, and scalable strategy for producing structurally enhanced, water-dispersible rGO dispersions suitable for solution-processed graphene films., Funding from Spanish MICIU/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2022-139671OB-I00, and PID2023-151080NB-I00, as well as from the Gobierno de Aragón (DGA) T03_23R, and E13_23R (Grupos de Investigación Reconocidos DGA), is acknowledged. R.A also acknowledges funding from the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU as well as the support from the Spanish Severo Ochoa Excellence Programme MICIU/AEI, CEX2023-001286-S MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Galvanic intercalation of molecular cations into van der Waals materials and heterostructures

  • Tezze, Daniel
  • Álvarez, Covadonga
  • Margineda, Daniel
  • Furqan, Mohammad
  • Mattioni, Samuele
  • Pereira, José Manuel
  • Ahsan, Umer
  • Mazánek, Vlastimil
  • Kumar Maurya, Yogesh
  • Abdel Aziz, Ilaria
  • Mantione, Daniele
  • Mateo-Alonso, Aurelio
  • Schiller, Frederik
  • Casanova, Félix
  • Mañas-Valero, Samuel
  • Alegría, Ángel
  • Coronado, Eugenio
  • Rivilla, Iván
  • Sofer, Zdeněk
  • Martín-Gracia, Beatriz
  • Ormaza, Maider
  • Arenal, Raúl
  • Hueso, Luis E.
  • Gobbi, Marco
The intercalation of molecular species into van der Waals (vdW) crystals is a powerful approach to combine the physical properties of vdW materials with the chemical versatility of molecules. However, its transformative promise remains underexplored, partly due to the difficulty of preserving high crystalline quality down to the few-layer limit using conventional intercalation methods. Here we present a galvanic strategy that exploits the low reduction potentials of selected metals to intercalate diverse molecular cations, including organometallic and chiral species, into both bulk vdW crystals and few-layer flakes under mild conditions, yielding 50 organic–inorganic superlattices. In addition, our method enables vertical intercalation heterostructures, where molecular cations are confined to a single component in a vdW stack, and lateral heterostructures, where two distinct molecular species are introduced into adjacent regions of the same flake. Finally, we demonstrate device-level integration of superconducting heterostructures, highlighting the prospects of galvanic intercalation for hybrid devices and emergent quantum phenomena., This work was supported under projects PID2021-128004NB-C21, PID2021-122511OB-I00, PID2024-157558NB-C22, PID2024-157558NB-C21 and PID2024-155708OB-I00, funded by Spanish MICIU/AEI/10.13039/501100011033 and by ERDF/EU, and under the María de Maeztu Units of Excellence Programme (grant no. CEX2020-001038-M). This work was supported by the FLAG-ERA grant MULTISPIN, via the Spanish MICIU/AEI and European Union NextGenerationEU/PRTR (grant no. PCI2021-122038-2A) and by the Diputación Foral de Gipuzkoa (QUANTUM, project no. 2024-QUAN-000014-01). It was also funded by the MCIN and by the European Union NextGenerationEU/PRTR-C17.I1, as well as by IKUR Strategy under the collaboration agreement between DONOSTIA INTERNATIONAL PHYSICS CENTER and NanoGune on behalf of the Department of Education of the Basque Government. B.M.-G. and M.G. acknowledge support from the ‘Ramón y Cajal’ Programme by the Spanish MICIU/AEI and EU NextGenerationEU/PRTR (grant nos. RYC2021-034836-I and RYC2021-031705-I). D.T. and C.A.-G. acknowledge the Spanish MICIU and ESF+ (grant nos. PRE2020-092992 and PRE2022-104487). Z.S. was supported by ERC-CZ programme (project LL2101) from Ministry of Education Youth and Sports of the Czech Republic (MEYS) by the project Advanced Functional Nanorobots (reg. no. CZ.02.1.01/0.0/0.0/15_003/0000444 financed by the ERDF). Z.S. also acknowledges the assistance provided by the Advanced Multiscale Materials for Key Enabling Technologies project, supported by the MEYS Project No. CZ.02.01.01/00/22_008/0004558, Co-funded by the European Union. V.M. was supported by project LUAUS23049 from Ministry of Education Youth and Sports (MEYS). I.R. thanks Ikerbasque and acknowledges support from grant nos. PID2023-151549NB-I00 and RED2022-134287-T, funded by MICIU and FEDER, EU, as well as grant no. IT-1553-22 funded by the Basque Government. M.O. acknowledges the support from the UPV/EHU research project (project no. EHU-N23/52). R.A. acknowledges funding from the Spanish MICIU with funding from European Union Next Generation EU (grant no. PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (grant nos. PID2023-151080NB-I00 and CEX2023-001286-S), as well as from the Government of Aragon (DGA) through the project no. E13-23R. The studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA), Universidad de Zaragoza, Spain. Y.K.M. acknowledges support through a María Zambrano grant from the University of the Basque Country (grant no. MAZAM21/12) funded by the Spanish MICIU the European Union NextGenerationEU. A.M.-A. acknowledges support from the Basque Science Foundation for Science (Ikerbasque), POLYMAT, the University of the Basque Country, Diputación de Guipúzcoa, Gobierno Vasco (PIBA_2024_1_0030 and BERC programme) and Gobierno de España (project nos. PID2021-124484OB-I00, PCI2022-132921, PID2024-157565NB-I00 and María de Maeztu Excellence Unit CEX2023-001303-M funded by MICIU/AEI and European Union NextGenerationEU/PRTR). This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Programme (grant agreement no. 722951). This project has received funding from the European Union under the Horizon 2020 Research and Innovation Programme (grant no. M-ERA.NET 2021, SuperSuper). This work was funded by the European Union under the Horizon Europe grant no. 101046231 (FantastiCOF). Technical and human support provided by SGIker of EHU is acknowledged., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001038-M), With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001303-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the nonlinear optical properties of MoS2 by interfacing with bay- or imide-substituted perylene diimides

  • Nikoli, Eleni
  • Canton-Vitoria, Rubén
  • Skentzos, Georgios
  • Pramatioti, Efrosyni
  • Zink-Lorre, Nathalie
  • Gutiérrez-Vílchez, Ana Maria
  • Fernández-Lázaro, Fernando
  • Arenal, Raúl
  • Couris, Stelios
  • Tagmatarchis, Nikos
We have investigated the tuning of nonlinear optical (NLO) properties in semiconducting MoS2 nanosheets through covalent functionalization with bay- or imide-substituted perylene diimide (PDI) derivatives. Five MoS2–PDI hybrid nanomaterials 1a–5a were synthesized by attaching PDI variants featuring azobenzene or other substituents, characterized via Raman, IR, TGA, STEM-EDS, ultraviolet–visible (UV–vis), photoluminescence, and electrochemical analyses, and evaluated for NLO response under nanosecond (4 ns, 1064/532 nm) and femtosecond (70 fs, 800/400 nm) laser excitations. The hybrids exhibit enhanced and tunable NLO-absorptive (switching from saturable to reverse-saturable absorption with intensity) and NLO-refractive (self-focusing) responses compared to exfoliated MoS2, with 1a and 2a (azobenzene-substituted PDIs) showing the strongest effects due to efficient electron-transfer and -resonant excitations. Hybrids demonstrate superior NLO susceptibility (χ3) values, particularly under resonant 532 nm excitation, with Im{χ3} values of up to −514.7 ± 57.4 × 10–13 esu·mL/mg for 2a at low intensities, attributed to Pauli blocking, defect states, and two-photon processes. Hybrids having bay-substituted PDIs grafted on MoS2 enhance conjugation and performance over imide variants, enabling applications in optical-limiting, mode-locking, and photonic devices. Threshold intensities for NLA switching (150–250 MW/cm2) exceed those of MoS2, highlighting the stability for high-power uses. The developed hybrid materials advance two-dimensional transition-metal dichalcogenide-based optoelectronics by overcoming light–matter interaction limits through molecular antenna effects from PDIs. The study underscores the substituent position and azobenzene integration as levers for NLO optimization in hybrid nanoarchitectures., The open access publishing of this article is financially supported by HEAL-Link., Financial support by the Hellenic Foundation for Research and Innovation HFRI under the “2nd Call for HFRI Research Projects to support Faculty Members and Researchers,” Project Number: 2482, is acknowledged. F.F.-L. thanks the Grant PID2022-140315NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU. F.F.-L. is also indebted to the Generalitat Valenciana (CIPROM/2021/059) and the Advanced Materials program by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and Generalitat Valenciana (MFA/2022/028). R.A. acknowledges funding from the Spanish MICIU with funding from the European Union NextGeneration EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI/10.13039/501100011033), as well as from the Government of Aragon (DGA) through the project E13 23R. The TEM studies were conducted at the Laboratorio de Microscopías Avanzadas (LMA), Universidad de Zaragoza, Spain., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Degenerate monolayer ising superconductors via chiral-achiral molecule intercalation

  • Margineda, Daniel
  • Álvarez-García, Covadonga
  • Tezze, Daniel
  • Gerivani, Sanaz
  • Caldevilla-Asenjo, David
  • Furqan, Mohammad
  • Rivilla, Iván
  • Casanova, Félix
  • Arenal, Raúl
  • Artacho, Emilio
  • Hueso, Luis E.
  • Gobbi, Marco
The data that support the findings of this study are available from the corresponding author upon reasonable request., Engineering unconventional superconducting states is a central challenge in condensed matter physics. Molecule-intercalated TaS2 superlattices have recently been reported to host such states, yet their origin remains debated—underscoring the urgent need for controlled, device-integrated studies. Here, we report that nanometer-thick TaS2 and NbSe2 intercalated with chiral and achiral organic cations instead exhibit robust monolayer-like Ising superconductivity, with no evidence of unconventional pairing. Using high-quality superlattices integrated into devices, we disentangle the roles of interlayer coupling and charge transfer in shaping their superconducting behavior. In TaS2, intercalation induces interlayer decoupling regardless of molecular size or symmetry, yielding monolayer-like Ising superconductivity. NbSe2 instead retains quasi-3D transport, with a gradual Ising enhancement and near-monolayer behavior only at the largest interlayer spacing. Transport remains reciprocal across all superlattices, showing no measurable signatures of inversion-symmetry breaking. The data are consistent with electronically detached monolayers with opposite spin-split bands, coupled through thermal and tunneling processes. In this scenario, supported by DFT calculations, inversion symmetry is preserved. These findings establish molecular intercalation compounds as a robust, device-ready, platform for engineering advanced superconducting superlattices., This work was supported under Projects PID2021-128004NB-C21, PID2021-122511OB-I00, PID2024-157558NB-C22, and PID2024-155708OB-I00 and PID2022-139776NB-C65 funded by Spanish MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe; and under the María de Maeztu Units of Excellence Programme (Grant CEX2020-001038-M). It was also supported by MICIU/AEI and by the European Union NextGeneration EU Plan (PRTR-C17.I1), by the IKUR-Quantum Technologies Strategy under the collaboration agreement between DIPC, CFM and CIC nanoGUNE on behalf of the Department of Education of the Basque Government, FPI grant PREP2022-000453 and María de Maeztu award to Nanogune, Grant CEX2020-001038-M. M.G. acknowledges support from MICIU/AEI and European Union NextGeneration EU/PRTR (grant no. RYC2021-031705-I). I.R. acknowledges support from Project PID2023-151549NB, funded by MICIU/AEI and by FEDER, UE; Basque Government IT1553-22. R.A. acknowledges funding from the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033), from the Government of Aragon (project DGA E13-23R), from MICIU with funding from EU Next-Generation (PRTR-C17.I1) promoted by the DGA and support from the ‘Severo Ochoa’ Programme for Centres of 758 Excellence in R&D of the Spanish MICIU (CEX2023-759 001286-S MICIU/AEI/). TEM studies have been conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza. E.A. also acknowledges support from the United Kingdom's EPSRC Grant no. EP/V062654/1., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001038-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlled one-pot fluorination for F, B, S or N tri-doping of graphene

  • Eraky, Mostafa S.
  • Haddad, Guillaume
  • Clavier, Batiste
  • Furqan, Mohammad
  • Batisse, Nicolas
  • Fahrat, Hani
  • Petit, Elodie
  • Flahaut, Emmanuel
  • Page, Alister J.
  • Liu, Chengyi
  • Chen, Sam
  • Arenal, Raúl
  • Dubois, Marc
Heteroatom doping of graphene effectively modifies surface charge, defect density, and electronic structure, with multi-heteroatom co-doping enhancing bond polarization, charge redistribution, and electrochemical performance for advanced energy storage, conversion, and other technological applications. In this work, we report a one-step synthesis of di- and tri-doped graphene via the simultaneous incorporation of fluorine and boron into pristine as well as S- and N-doped graphene, starting from commercially available N- or S-doped graphene. Mild gas–solid fluorination was performed using elemental fluorine diluted in an inert nitrogen atmosphere at controlled temperatures. The presence of a boron-containing precursor enables the in situ generation of BF3, which acts as an effective boron-doping agent during the fluorination process. This approach allows, for the first time, the controlled synthesis of F/B/S-, and F/B/N- tri-doped graphene materials through a single-step reaction. The doping mechanisms and structural evolution were elucidated using complementary characterization techniques, including Fourier-transform infrared (FTIR) spectroscopy, solid-state nuclear magnetic resonance (NMR) spectroscopy (19F, 11B and 13C), thermogravimetric analysis (TGA) coupled with mass spectrometry (MS) and infrared spectroscopy (IR), and X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and (scanning)transmission electron microscopy ((S)TEM). The results demonstrate that hexagonal boron nitride and molecular fluorine act as precursors for the in situ generation of BF3, which, together with F2, enables efficient and homogeneous incorporation of fluorine and boron into heteroatom-doped graphene carbon frameworks., The authors acknowledge the funding from Agence Nationale de la Recherche (ANR, ANR-24-CE08-1765). R.A acknowledges funding from the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI/10.13039/501100011033), as well as from the Government of Aragon (DGA) through the project E13 23R. Most of the TEM and all the STEM and Raman studies were conducted at the Laboratorio de Microscopías Avanzadas (LMA), Universidad de Zaragoza, Spain. The authors also acknowledge the Science, Technology & Innovation Funding Authority (STDF) and the Institut Français d’Égypte (IFE) for support through the STDF–IFE postdoc fellowship program (Call 11), in partnership with the Embassy of France in Egypt., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

F-diamane synthesis through ball-milling exfoliation of fluorinated expandable graphite

  • Haddad, Guillaume
  • Nomède-Martyr, N
  • Bilas, P.
  • Furqan, Mohammad
  • Réveret, François
  • Bourgogne, David
  • Petit, Elodie
  • Sarr, Mamadou
  • Radescu, Silvana
  • Arenal, Raúl
  • Chen, Sam
  • Dubois, Marc
Diamane, a two-dimensional diamond-like nanomaterial, has gained significant attention due to its outstanding physicochemical properties and potential applications in nanoelectronics, optics, energy devices, and quantum technologies. Here, we report a rapid, scalable method to produce fluorinated diamane (F-diamane) nanosheets via mechanical grinding in liquid media, using pre-exfoliated graphite fluoride enriched in (C2F)n to enhance yield. Comprehensive characterization confirms the formation of F-diamane-type materials. DFT calculations reveal that its superior mechanical strength and rigidity compared to fluorographene, combined with the higher stiffness of (C2F)n and the easier exfoliation of (CF)n, drive phase enrichment during processing, ultimately increasing the F-diamane content in the dispersions. The photoluminescence properties with a maximum emission when the excitation wavelength is 325 nm. Moreover, the band gap of F-diamane-type layers is found at 3.84 eV., The authors acknowledge the funding from Agence Nationale de la Recherche (ANR ANR-24-CE08-1765). MD and SC acknowledge the funding from the Australian Research Council (DP230100542) and the support from the University of Newcastle and the University of New South Wales. RA acknowledges the support from the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon as well as from the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI/10.13039/501100011033), the Government of Aragon (DGA) through the project E13 23R and the use of the facilities of the Laboratorio de Microscopias Avanzadas (LMA) at the Universidad de Zaragoza. SR acknowledges the support of Spanish Ministerio de Ciencia e Innovación (DOI: 10.13039/501100011033) under Project PID2022–138076NB-C44., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly transparent gallium-doped zinc oxide nanosheets enabling stable all-in-one red-green-blue photodetectors with high responsivity

  • Meelab, Vivid
  • Canton-Vitoria, Rubén
  • Furqan, Mohammad
  • Morita, Yoshinori
  • Morita, Shu
  • Yamamoto, Eisuke
  • Kobayashi, Makoto
  • Arenal, Raúl
  • Osada, Minoru
Two-dimensional zinc oxide nanosheets are attractive building blocks for ultrathin optoelectronic devices because of their high optical transparency and chemical stability; yet their weak visible-light response has hindered practical applications. Here, we demonstrate gallium-doped zinc oxide nanosheets as highly transparent and thermally robust platforms for all-in-one red-green-blue photodetectors. Gallium-doped nanosheets are synthesized via ionic layer epitaxy with precise compositional control. Structural, optical, and electrical analyses reveal that gallium doping concurrently enhances multiple properties, leading to improved photodevice performance. Gallium-doped zinc oxide nanosheets exhibit responsivities of up to 800 A W–1, carrier mobilities of 1.94 cm2 V–1s–1, and an average visible transmittance of 99.995% per nanosheet, enabling broadband photodetection without sacrificing optical throughput. Owing to their solution processability, the nanosheets can be vertically assembled into Bayer-like stacked architectures that decode red, green, and blue signals within a single pixel. Notably, the stacked photodetectors maintain stable photoresponse and excellent thermal and oxidative stability up to 450 °C, highlighting their promise for high-density, ultracompact color imaging technologies., This work was funded by the Grant-in-Aid for Scientific Research KAKENHI (21H05015, 23K17956, 25K22296), Japan Society for the Promotion of Science (JSPS), A-STEP, JST, Design & Engineering by Joint Inverse Innovation for Materials Architecture (DEJI 2 MA), MEXT, the joint usage/ research program of IMaSS, Nagoya University, and “Quantum-Based Frontier Research Hub for Industry Development”, Nagoya University. R.A. acknowledges funding from the Spanish MICIU, European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (PID2023-151080NB-I00/AEI/ 10.13039/501100011033 and CEX2023-001286-S MICIU/ AEI/10.13039/501100011033), as well as from the Government of Aragon (DGA) through the project E13 23R., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intercalated carbon nanotube fibers with high specific electrical conductivity

  • Isidro Gómez, Ana Inés de
  • Vassilev, Stanislav V.
  • Mikhalchan, Anastasiia
  • Peláez-Fernández, Mario
  • Llorca, Jordi
  • Arenal, Raúl
  • Vilatela, J. J.
Translating the conductivity of individual carbon nanotubes into practical, macroscopic conductors remains a challenge. We report highly aligned fibers of double-walled carbon nanotubes intercalated with chains of tetrachloroaluminate anions (AlCl4−) in the intertube channels. The AlCl4− intercalant acts as a noncovalent dopant, accepting 0.65 electrons per anion, mostly from the outer nanotube layer. Combined with a 17% intercalant volume fraction, it produces an increase in room-temperature conductivity to values as high as 24.5 mega-Siemens per meter, which is 41% of that of copper. Specific conductivity values reach 17,345 Siemens-meter squared per kilogram, which is superior to that of metals. These fibers are five times stronger and half the weight of conventional overhead cables while remaining stable in dry conditions and retaining 80% of their conductivity protected from moisture by a cable polymer sheath., EU UNIYARNS ERC-Consolidator Grant 101045394 (J.J.V.); USA Air Force Office of Scientific Research Grant FA8665-23-1-7052 (J.J.V.); CESA/Héroux-Devtek Spain (J.J.V.); Government of Aragon (DGA) through the project E13 23R (R.A.). The “(MAD2D-CM)-UCM” project is funded by Comunidad de Madrid; the Recovery, Transformation, and Resilience Plan; and NextGenerationEU from the European Union Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI /10.13039/501100011033) (R.A.)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanical and electrical properties of a nano-gap or how to play the nano-accordion

  • Hettler, Simon
  • Arenal, Raúl
[Data availability statement] The data that support the findings of this study are openly available at the following URL/DOI:https://doi.org/10.5281/zenodo.17549328., In-situ transmission electron microscopy (TEM) has become an important technique to study dynamic processes at highest spatial resolution and one branch is the investigation of phenomena related with electrical currents. Here, we present experimental results obtained from a peculiar in-situ TEM device, which was prepared with the aim to analyze the relationship between (thermo) electric properties and specific crystal orientations of a misfit layered compound. The formation of a nano-sized gap at a grain boundary facilitated a precisely controllable mechanical bending of the device by application of differential heating currents. The devices’ electrical properties were found to be substantially influenced by the gap, leading to a high intrinsic voltage. This voltage additionally depends on the vacuum environment and on the history of applied heating currents with internal field strengths of up to 37 kV m−1. These findings are largely attributed to the presence of adsorbed molecules within the gap region. The electrical in-situ TEM studies of this work illustrate that interior surfaces can strongly influence electrical properties even under high vacuum conditions., The authors acknowledge funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No 889546 and by the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon as well as from the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI/10.13039/501100011033) and the Government of Aragon (DGA) through the Project E-13 23 R. Sample courtesy from A. Sotelo (INMA, Universidad de Zaragoza). The microscopy works have been conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, Characterization, and Optical Properties of Undoped and Te-Doped W(SxSe(1−x))2 and Core-Shell WS2@W(SxSe(1−x))2 Nanotubes

  • Immanuel, Philip Nathaniel
  • Prasad, Neena
  • Puravankara, Akshay
  • Kusak, Stepan
  • Rosentsveig, Rita
  • Feldman, Yishay
  • Eden-Kossoy, Anna
  • Kaplan-Ashiri, Ifat
  • Kundrat, Vojtech
  • Arenal, Raúl
  • Tenne, Reshef
  • Yadgarov, Lena
WS2 nanotubes (NTs) are layered transition-metal dichalcogenides whose diameter strongly influences strain and optical properties. Alloying sulfur with selenium in W(SxSe1−x)2 NTs provides compositional tunability, yet the link between precursor composition, alloy formation, and optical response remains unclear. In this work, W(SxSe1−x)2 (WSSe) NTs with controlled S/Se ratios were synthesized and characterized using Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, STEM-EDS, and X-ray diffraction. The synthesis produced high yields of small-diameter NTs (<30 nm). Compositional analysis revealed sulfur enrichment relative to the nominal precursor ratio, while the interlayer spacing increased from 0.62 to 0.66 nm with increasing selenium content. To examine incorporation of heavier chalcogens, tellurium (Te) was introduced during synthesis. Owing to its larger atomic radius and lower chemical reactivity compared with sulfur and selenium, Te incorporation presents a significant kinetic limitation during NT growth. Elemental analysis shows that Te is incorporated only at trace dopant levels (<1 at%) rather than forming a quaternary alloy phase. Despite this low incorporation, Te doping induces a measurable red shift of the A-exciton transition, indicating a slight reduction in bandgap energy. Core–shell WS2@WSSe NTs were also synthesized, exhibiting nonlinear optical effects. These findings may enable alloyed TMD NTs for nanoscale optoelectronic and photodetection devices., R.A. acknowledges funding from the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI/10.13039/501100011033), as well as from the Government of Aragon (DGA) through the project E13 23R. The HRSTEM (EDS) studies were conducted at the Laboratorio de Microscopías Avanzadas (LMA), Universidad de Zaragoza, Spain. VK acknowledges the Cryo-electron microscopy and tomography core facility CEITEC MU of CIISB, Instruct-CZ Centre, supported by MEYS CR (LM2023042) and European Regional Development Fund-Project “Innovation of Czech Infrastructure for Integrative Structural Biology (no. CZ.02.01.01/00/23_015/0008175). RT acknowledges the support of The Estate of Manfred Hecht and the Estate of Diane Recanati. The Perlman Family Foundation and the Kimmel Center for Nanoscale Science are greatly acknowledged. LY acknowledges the support of the Ministry of Innovation (0007244 and 0008207), Israel., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Copper(I) Oxo Species in Cu/ZnO Catalysts and Its Role in the Methanol Synthesis from CO2 Hydrogenation

  • Soriano, José
  • Fo, Y.
  • Gómez, Daviel
  • López Nieto, José Manuel
  • Roy, Abhijit
  • Manzorro, Ramón
  • Arenal, Raúl
  • Calvino, Jose J.
  • Song, Weiyu
This study reveals the presence of low-atomicity copper(I) oxo clusters strongly anchored to ZnO in commercial-type Cu/ZnO catalysts that, coexisting with metallic copper nanoparticles, play a critical role in CO2 hydrogenation. Their detection is challenging because metallic copper nanoparticles dominate the catalyst surface and these clusters appear in low amounts. Nevertheless, definitive evidence of their existence comes from the combination of in situ Raman spectroscopy, temperature-programmed CO surface reaction (TPSR-CO), time-resolved kinetic studies, and advance microscopy studies (STEM-XEDS and STEM-EELS). Catalytic studies combined with density functional theory (DFT) calculations demonstrate its critical role in methanol production and their size-dependent contribution to the total activity compared to traditional Cu-ZnO interfacial sites. According to DFT studies, CO2 adsorption is significantly more favorable on small Cu14O7 and Cu32O16 clusters than on extended Cu2O (111) (110) facets, metallic copper, or conventional metal-support interfacial sites. Moreover, the stabilization of carboxyl rather than formate-like intermediates follows a similar trend than the methanol production, being preferential on small Cu14O7 and Cu32O16 clusters, underlying a carboxyl-type intermediate path in methanol production., This research was funded by Ministerio de Ciencia, Innovación y Universidades, grant numbers PID2021-1262350B-C31, PID2020- 113006-RB-I00, and PID2023-151080NB-I00; CEX2023-001286- S funded by MCIN/AEI/10.13039/501100011033; and the Government of Aragon (DGA) through the project E13_23R and Generalitat Valenciana (GVA), grant number CIAICO/2021/2138. This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) and Generalitat Valenciana (TED2021-130756B-C32and ref MFA/2022/016). Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. D.G. thanks the Marie-Curie Postdoctoral (MSCA) Fellowship ID 101154019., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286- S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigation of the chemical structure of core–shell Fe3O4@Ni1−xCoxFe2O4 nanoparticles and its influence on their magnetic properties

  • Lopez-Martin, Raul
  • Makarchuk, Iryna
  • Choueikani, Fadi
  • Hettler, Simon
  • Arenal, Raúl
  • De Toro, Jose A.
  • Pichon, Benoit P.
[Data availability] Data for this article, including TEM micrographs, EELS mapping, XRD patterns and magnetic data are available at Seafile Unistra at https://seafile.unistra.fr/d/d68569bc9fe64f289787/, Core–shell ferrite nanoparticles offer a promising route toward high-performance, rare-earth-free magnetic nanomaterials, yet fine control over interfacial exchange coupling remains a critical challenge. Here, we report the synthesis of Fe3O4@Ni1−xCoxFe2O4 nanoparticles via a two-step seed-mediated thermal decomposition process in organic media, enabling systematic tuning of the shell composition and size of the pristine Fe3O4 nanoparticles. High-resolution scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS) analyses confirm the formation of an epitaxial spinel shell, with excellent crystallographic continuity and homogeneous spatial cation distribution. X-ray absorption spectroscopy (XAS) and X-ray magnetic circular dichroism (XMCD) reveal that Co2+ and Ni2+ cations preferentially occupy octahedral sites while a minor -but significant-Ni1−xCoxO wüstite phase forms at the periphery, as also suggested by microscopy, introducing small exchange-bias effects. Alongside the exchange bias effect, a comprehensive magnetic characterization using SQUID magnetometry revealed the role of both the shell composition and the surface anisotropy, the latter being dominant over the shell composition when the core nanoparticle size was reduced. This multi-technique study unveils the formation mechanism of such core–shell bimagnetic nanoparticles and the intricate interplay between composition, interface structure, and magnetic behavior. It provides a potential framework for designing chemically engineered, anisotropy-tailored magnetic nanostructures for spintronic, biomedical, and high-density data storage applications., B.P. and I.M. acknowledge support from IdEx University of Strasbourg. J.A.D.T. and R.L.-M. acknowledge support from Junta de Comunidades de Castilla-La Mancha [SPBLY/21/180501/000226] and Ministerio de Ciencia, Innovación y Universidades [PID2022142267NB-I00]. B.P., I.M. and F.D. acknowledge the SOLEIL synchrotron for beamtime allocation at the DEIMOS beamline. R.A. and S.H. acknowledge funding from the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033) and CEX2023-001286-S MICIU/AEI/10.13039/501100011033) as well from the Gobierno de Aragón (DGA) under project E13-23R., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stepwise seed-mediated growth of multiphase spinel@Wüstite Core–Shell nanoparticles with exchange-coupled magnetic properties

  • Sartori, Kevin
  • Choueikani, Fadi
  • Hettler, Simon
  • Arenal, Raúl
  • Pichon, Benoit P.
A series of exchange-coupled magnetic nanoparticles featuring multiple magnetic phases arranged in a core-shell architecture was synthesized through a three-step seed-mediated growth process. Iron, cobalt, and nickel precursors were sequentially thermally decomposed in high-boiling-point solvents (approximately 300 °C), enabling the successive growth of CoO and NiO shells on Fe₃O₄ nanoparticle's cores. The structural and chemical characteristics of these nanoparticles were thoroughly investigated using a combination of advanced analytical techniques, including scanning transmission electron microscopy (STEM) in high-angle annular dark-field imaging mode (HAADF), electron energy-loss spectroscopy STEM (EELS-STEM), and X-ray magnetic circular dichroism (XMCD). After each thermal decomposition step, the nanoparticle size progressively increased, accompanied by noticeable changes in morphology, indicating significant surface reconstruction. Furthermore, the chemical structure proved to be more complex than initially anticipated. The high synthesis temperature promoted cation interdiffusion at the interfaces as well as partial dissolution–recrystallization processes at the nanoparticle surface. An intermixed Co/Ni shell, composed of a combination of wüstite and spinel phases, was found to influence the magnetic properties of the nanoparticles through exchange bias coupling. This effect is directly correlated with the relative proportions of Co and Ni cations incorporated within the shell., K.S. was supported by a PhD grant from the French Agence Nationale de la Recherche (ANR) under the reference ANR-11-LABX-0058-NIE within the Investissement d'Avenir program ANR-10-IDEX-0002-02 and SOLEIL synchrotron / Laboratoire Léon Brillouin fellowship. The authors are grateful to SOLEIL synchrotron light source for providing the access to DEIMOS beamline and to DIAMOND synchrotron light source for providing access to BLADE beamline. R.A. and S.H. acknowledge funding from the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033) and CEX2023-001286-S MICIU/AEI /10.13039/501100011033) as well from the Gobierno de Aragón (DGA) under project E13-23R., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Toward quantitative thermoelectric characterization of (nano)materials by in-situ transmission electron microscopy

  • Hettler, Simon
  • Furqan, Mohammad
  • Sotelo, Andrés
  • Arenal, Raul
We explore the possibility to perform an in-situ transmission electron microscopy (TEM) thermoelectric characterization of materials. A differential heating element on a custom in-situ TEM microchip allows to generate a temperature gradient across the studied materials, which are simultaneously measured electrically. A thermovoltage was induced in all studied devices, whose sign corresponds to the sign of the Seebeck coefficient of the tested materials. The results indicate that in-situ thermoelectric TEM studies can help to profoundly understand fundamental aspects of thermoelectricity, which is exemplary demonstrated by tracking the thermovoltage during in-situ crystallization of an amorphous Ge thin film. We propose an improved in-situ TEM microchip design, which should facilitate a full quantitative measurement of the induced temperature gradient, the electrical and thermal conductivities, as well as the Seebeck coefficient. The benefit of the in-situ approach is the possibility to directly correlate the thermoelectric properties with the structure and chemical composition of the entire studied device down to the atomic level, including grain boundaries, dopants or crystal defects, and to trace its dynamic evolution upon heating or during the application of electrical currents.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Graphene-modified g-C3N4/ a-Fe2O3 systems for light-induced hydrogen generation

  • Touati, Wassila
  • Filip Edelmannová, Miroslava
  • Karmaoui, Mohamed
  • Bekka, Ahmed
  • Furgeaud, Clarisse
  • Alaoui, Chakib
  • kadi Allah, Imene
  • Figueiredo, Bruno
  • Labrincha, J.A.
  • Arenal, Raul
  • Koci, Kamila
  • Maria Tobaldi, David
Photocatalysis represents an advanced and efficient technology for harnessing light energy. The non-toxicity, affordability, and versatility of this technique render it particularly attractive for hydrogen production via water splitting. Nevertheless, the primary challenge lies in identifying materials capable of efficiently catalyzing the water splitting reaction upon exposure to light. This study presents the influence of the quantity of hematite and graphene on g-C3N4 in the context of hydrogen generation from methanol-water decomposition under UVC irradiation. Pure g-C3N4 exhibits the highest hydrogen generation efficiency. However, adding hematite decreases photocatalytic efficiency, likely due to the formation of a type II heterojunction between α-Fe2O3 and g-C3N4, which reduces the overall reduction capacity of the system. While incorporating graphene into the g-C3N4/α-Fe2O3 system enhances photocatalytic efficiency by improving electron mobility and prolonging the lifetime of photo-generated excitons, the highest yield was achieved with BUF10/GNP0.5. This research offers valuable insights into charge transfer and separation processes for photo-generated excitons within the g-C3N4/α-Fe2O3 and g-C3N4/α-Fe2O3/graphene systems in the context of light-induced hydrogen production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Proximity‐Mediated Multi‐Ferroelectric Coupling in Highly Strained EuO‐Graphene Heterostructures

  • Pandey, Satakshi
  • Pin, Thomas
  • Hettler, Simon
  • Arenal, Raul
  • Bouillet, Corinne
  • Maroutian, Thomas
  • Robert, Jérôme
  • Gobaut, Benoit
  • Kundys, Bohdan
  • Dayen, Jean-François
  • Halley, David
2D van der Waals materials and their heterostructures are a fantastic playground to explore emergent phenomena arising from electronic quantum hybridization effects. In the last decade, the spin-dependant hybridization effect pushed this frontier further introducing the magnetic proximity effect as a promising tool for spintronic applications. Here the uncharted proximity-controlled magnetoelectric effect in EuO/graphene heterostructure is unveiled. This is obtained while creating a new multiferroic hybrid heterostructure with multifunctional properties. Using a topotactic method magnetic insulating EuO thin films on graphene is grown under high compressive strain, which induces the appearance of an additional ferroelectric order, with an electric polarization that reaches up to 18 µC cm−2 at room temperature. This observation therefore quantitatively confirms the theoretical predictions made 15 years ago of a strain-induced ferroelectric state in EuO. Moreover, the EuO induces a magnetic proximity state into the graphene layer by interfacial hybridization. This new ferroelectric state in the EuO/graphene heterostructure is stable up to room temperature where it coexists with the EuO/graphene magnetic state. Furthermore, intertwined magneto-electric effects are shown in these strained heterostructures which can facilitate the manipulation of magnetization and electric polarization in future memory and neuromorphic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Structure and properties of tubular structures based on the quaternary misfit layered compound Sm1−xYxS–TaS2

  • Hettler, Simón
  • Furqan, Mohammad
  • Sreedhara, M. B.
  • Khadiev, Azat
  • Tenne, Reshef
  • Arenal, Raul
Misfit layered compounds (MLCs) are incommensurate super-lattices made up of two repeating subunits and are promising for different applications due to the possibility of a synergetic combination of the properties of the employed sublayers. A means of fine-tuning a specific MLC is to alloy one of the elements in the system. In this study, quaternary MLCs made of Sm1−xYxS–TaS2 were successfully synthesized and the resulting structures were characterized in detail, with a specific focus on tubular structures. Owing to the small difference between the ionic radii of Sm and Y, the structure of the quaternary MLCs follows the one of pristine SmS–TaS2, irrespective of the degree of alloying and with an anisotropic change of the lattice parameters up to a maximum of 2.7%. Nevertheless, microscopy, spectroscopy, and diffraction techniques allow us to reveal the impact of the composition on important characteristics of the MLC. Notably, for a specific composition, the ratio between the lattice parameters of the two subsystems adopts a value of 3 to 5, which could lead to a transition toward a commensurate superstructure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Vanadium incorporation in ferrite nanoparticles serves as an electron buffer and anisotropy tuner in catalytic and hyperthermia applications

  • Torres, T. E.
  • Valdés, D. P.
  • Hettler, S.
  • Nuñez, J. M.
  • Rodrigo, I.
  • Orue, I.
  • García, J. Á.
  • Plazaola, F.
  • Zysler, R. D.
  • Lima, E.
  • Aguirre, M. H.
  • Goya, G. F.
  • Arenal, R.
Cancer research has gradually shifted its focus from individual therapies to a combination of them for enhanced treatment effectiveness. In particular, the increased interest in the field of catalytic medicine through nanozymes proposes promising combinations with photothermal therapy, photodynamic therapy, and magnetic fluid hyperthermia (MFH). Nanozyme activity centers around the hydroxyl radical ˙OH, the most toxic of the reactive oxygen species (ROS). With a synergistic approach in mind, we studied VxFe3−xO4 magnetic nanoparticles (MNPs) as agents for ROS production and heating. These MNPs were exhaustively characterised both morphologically and magnetically. A compositional analysis through electron microscopy and spectroscopy unveils a core–shell structure with a V-rich shell. A study of the power absorption of these MNPs fixed into a gel matrix, emulating cytosol viscosity, provides values of up to 1000 W g−1 for samples with 0.5 wt% MNPs, an AC magnetic field amplitude of 65 mT and a frequency of 350 kHz, typical in the MFH application. A concentration of the ˙OH-adduct of up to 2300 nM has been measured through electron spin resonance analysis as a result of peroxidase-like activity. Through the comparison with similarly-sized ferrite MNPs, we determined that V incorporation lowers the magnetic anisotropy and serves as an electron buffer, explaining the enhanced MFH and ROS-production results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

B/N-doped carbon nano-onions as nanocarriers for targeted breast cancer therapy

  • Mohan, Hugh
  • Salaroglio, Iris Chiara
  • Bartkowski, Michal
  • Courtney, Kellyjean
  • Andreana, Ilaria
  • Limongi, Tania
  • Arenal, Raul
  • Riganti, Chiara
  • Arpicco, Silvia
  • Giordani, Silvia
Cancer is one of the leading causes of death worldwide and represents a significant burden on global health systems. Many existing chemotherapy treatments come with severe side effects, ranging from hair loss to cardiotoxicity, and many types of cancer express chemotherapy resistance, such as triple-negative breast cancer. This study presents a novel boron/nitrogen-doped carbon nano-onion (BN-CNO) based nanocarrier system that can deliver doxorubicin (DOX) to cancer cells via a pH-dependent drug release mechanism. The nanocarrier formulation consists of a hyaluronic acid/phospholipid conjugate (HA-DMPE) that is non-covalently bound to the BN-CNOs upon which DOX is loaded via π–π stacking interactions. The HA-DMPE/BN-CNO/DOX system enhances the uptake and anticancer effects of DOX in MDA-MB-468 and MDA-MB-231 TNBC cells whilst reducing the cardiotoxicity of DOX in AC-16 human cardiomyocytes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The Simultaneous Total Oxidation of Toluene, Propene, and CO Environmental Pollutants Using Bimetallic Au‐Pt/ZrO<sub>2</sub>/UVM‐7 Catalysts

  • Aggett, Kieran J.
  • García, Tomás
  • Morgan, David J.
  • Peláez-Fernández, Mario
  • Mayoral, Álvaro
  • Arenal, Raúl
  • Solsona, Benjamín E.
  • Amorós, Pedro
  • Taylor, Stuart H.
Supported precious metal catalysts, containing either mono or bimetallic Au and Pt nanoparticles, anchored on a hierarchical porous UVM‐7 silica structure, were prepared and evaluated for the removal of volatile organic pollutants by oxidation. The catalysts were investigated for the simultaneous total oxidation of three model compounds: propene, toluene, and CO, commonly associated with “cold start pollutants” in automotive exhausts. Only Au showed low catalytic activity, while Pt nanoparticles were active, with a greater concentration of accessible Pt nanoparticles corresponding with increased catalytic activity. Interestingly, having both metals present on the same catalyst together was preferential for producing higher activity in the total oxidation of CO, propene, and toluene. The loadings of Pt nanoparticles on the catalyst surface, as well as the synthesis method, were important controlling factors. The order of metal loading deposition was influential, depositing Au and Pt sequentially resulted in surface enrichment of the latter deposited metal, leading to enhanced catalytic performance. When Au and Pt were loaded simultaneously, alloy formation occurred, and the surface Pt enrichment was more moderate, but still maintaining better catalytic performance compared with the pure Pt catalyst.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Two‐dimensional polycyclodextrins for strong multivalent host‐guest interactions at biointerfaces

  • Goudarzi, Zahra
  • Mohammadi, Zahra
  • Maleki, Reza
  • Beyranvand, Siamak
  • Nie, Chuanxiong
  • Gholami, Mohammad Fardin
  • Akkaya, Özge
  • Kalantari, Mahdieh
  • Nemati, Mohammad
  • Yousufvand, Fatemeh
  • Shahverdi, Fatemeh
  • Rashidipour, Marzieh
  • Ahmadian, Zainab
  • Donskyi, Ievgen
  • Nickl, Philip
  • Brzezinski, Marek
  • Ludwig, Kai
  • Rabe, Jürgen P.
  • Arenal, Raul
  • Chong, Cheng
  • ALL, Angelo H.
  • Adeli, Mohsen
While 2D polymers with aromatic backbones have been increasingly receiving interest from various scientific disciplines, their nonaromatic counterparts are less investigated. In this work, 2D poly(β‐cyclodextrin)s (2D‐CDs) with few hundred nanometers to millimeters lateral sizes and 0.7 nm thickness are synthesized using graphene and boron nitride as colloidal templates and used for multivalent host‐guest interactions with biological systems. Deposition of cyclodextrins on graphene and boron nitride templates followed by lateral crosslinking and template detachment resulted in 2D‐CDs with different physicochemical properties. The size of the 2D‐CDs is dominated by noncovalent interactions between cyclodextrins and templates. While an interaction energy of −224.3 kJ mol−1 at the interface between graphene and cyclodextrin led to few hundred nanometer 2D‐CDs, boron nitride with weaker interactions (−179.4 kJ mol−1) resulted in polymers with millimeters lateral sizes. The secondary hydroxyl groups of 2D‐CDs are changed to sodium sulfate, and 2D polymers with the ability of simultaneous host‐guest and electrostatic interactions with biosystems including vessel plaques and herpes simplex virus (HSV) are obtained. The sulfated 2D‐CDs (2D‐CDSs) show a high ability for virus binding (IC50 = 6 µg mL−1). Owing to their carbohydrate backbone, 2D‐CDs are novel heparin mimetics that can be formulated for efficient inhibition of viral infections.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fabrication of α-Fe<sub>2</sub>O<sub>3</sub> Nanoparticles/g-C<sub>3</sub>N<sub>4</sub> Direct Z-Scheme Heterojunction of Durable Photocatalytic Activity

  • Galán-González, Alejandro
  • Fernández, Isaías
  • Zaluzec, Nestor J.
  • Cambré, Sofie
  • Arenal, Raul
  • Benito, Ana M.
  • Maser, Wolfgang K.
The fabrication of a nanohybrid photocatalyst that combines α-Fe2O3 nanoparticles with graphitic carbon nitride (g-C3N4) is reported. The ensuing direct Z-scheme heterojunction greatly boosts the photocatalytic activity of the α-Fe2O3/g-C3N4 nanohybrids. This results in organic dye degradation rates more than two times higher than its individual components, promoted by the efficient charge separation and transfer of the Z-scheme heterojunction mechanism of the nanohybrid photocatalyst. In addition, recyclability tests show an outstanding stability of the nanohybrids spanning five consecutive dye degradation experiments, during which the degradation rate is slightly improved. The origin of the improved photocatalytic performance of the nanohybrid lies in the intimate interaction between α-Fe2O3 and g-C3N4 afforded by the two-step fabrication process, which enables the direct and controlled growth of α-Fe2O3 nanoparticles on g-C3N4. A first ultrasound impregnation step promotes the effective anchoring of stable Fe species via Fe−N and C−N/C−O bonding, while a second microwave phase conversion step induces the subsequent growth of α-Fe2O3 nanoparticles on the g-C3N4 sheets. Careful control of the FeCl3 precursor concentration up to a threshold value of 0.25 M during impregnation enables complete control over their size and phase. This approach clearly highlights the benefits of microwave reactor systems in the fabrication of hematite-based Z-scheme photocatalytic, overcoming the limitations of conventional thermal treatment technology.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Chemistry and Interfacial Structure Promoting Quasi-van der Waals Epitaxial Growth of WS2 Nanosheets on Sapphire for Prospective Application in Field-Effect Transistors

  • Majumder, Supriyo
  • Shinde, Nitin
  • Cavin, John
  • Chen, Chen
  • Dey, Arka Bikash
  • Narayanachari, K.V.L.V.
  • Zhang, Jiaqi
  • Garcia-Wetten, David
  • Dieguez, Oswaldo
  • Hettler, Simon
  • Cohen, Assael
  • Keane, Denis T.
  • Arenal, Raul
  • Rondinelli, James M.
  • Ismach, Ariel
  • Bedzyk, Michael J.
How do chemical and structural modifications to the supporting crystal surface affect the subsequent van der Waals (vdW) or quasi(Q)-vdW epitaxial growth of 2D nanocrystals? Developing an atomic-scale picture of such an interfacial system is crucial for understanding its impact on the physical and chemical properties of the supported 2D materials. The elucidation of the interfacial structure and chemistry needed to promote the Q-vdW epitaxial growth of 2D tungsten disulfide (WS2) nanocrystals contributes to the growth mechanism understanding, thus pushing forward the integration of such atomically thin semiconductors toward real field-effect transistor applications. In addition to an atomic-force microscopy top view, we showcase a combination of X-ray techniques for a top-to-bottom investigation of the complexities of the buried interface structures. This approach uses X-ray photoelectron spectroscopy, X-ray standing wave excited X-ray fluorescence, and crystal truncation rod scattering to produce a highly resolved chemical-state-specific 3D atomic map for the extended interface structure of WS2/α-Al2O3(001). Employing these detailed analysis methods, along with density functional theory to further refine the picoscale structure, we demonstrate how two different types of interface engineering during the pregrowth stage lead to significant differences in the chemical and structural modifications to the terminal surface of c-face sapphire, which in turn leads to substantial differences in the submonolayer growth of supported WS2 2D nanocrystals in terms of lateral domain sizes, epitaxial registry, vdW gaps, and stability. © 2025 American Chemical Society.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On the relationship between oxygen K edge fine structure and cobalt/nickel content in magnetite-based core-shell nanoparticles

  • Hettler, Simon
  • Arenal, Raul
Iron oxide nanoparticles (NPs) are used in a broad range of applications and offer the possibility of fine tuning their properties by forming hybrid core-shell structures. Scanning transmission electron microscopy (STEM) combined with electron energy loss spectroscopy (EELS) is frequently used to study such NPs at the local scale. Specifically, the energy loss near edge structure (ELNES) provides rich information on the local chemistry. Here, the dependence between the ELNES signal of the oxygen K edge and the incorporation of cobalt and nickel into the shell of magnetite NPs is investigated quantitatively using an intensity ratio between specific energy windows of the O-K edge. The analysis shows that both the local and global cobalt and nickel content of a NP influence this relationship. In addition, the overlap between the Fe-L1 and Ni-L2,3 edges is studied, the impact of a supporting film on the ELNES analysis is discussed, and the importance of a clean sample preparation is demonstrated.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Terpyridine-functionalized single-walled carbon nanotubes towards selectivity in the oxygen reduction reaction

  • Sideri, Ioanna K.
  • Arenal, Raul
  • Tagmatarchis, Nikos
Single-walled carbon nanotubes (SWCNTs) have been widely employed as electrocatalysts due to their exceptional mechanical strength and electronic properties, despite lacking intrinsic catalytic centers. Current research efforts focus on enhancing their catalytic activity by modifying them with organometallic chelate complexes, to achieve controlled molecular-level structuring and improved performance in Proton Exchange Membrane Fuel Cells (PEMFCs). While the mechanistic understanding of their electrocatalytic behavior in relation to molecular structure remains in its early stages, it offers valuable insights for the development of efficient electrocatalysts. In this study, SWCNTs were stepwise chemically modified with terpyridine ligands both in the absence of metal and in the presence of ruthenium (Ru) in two different oxidation states. The resulting SWCNT-based nanomaterials were characterized using Raman, UV-Vis, XPS and energy-dispersive X-ray spectroscopy (EDS) coupled with transmission electron microscopy (TEM) imaging, while the degree of functionalization was assessed through thermogravimetric analysis (TGA). A comprehensive electrocatalytic investigation demonstrated how covalent modification with Ru2+ and Ru3+ terpyridine complexes influences the mechanistic pathway of the oxygen reduction reaction (ORR). This comparative analysis underscores the critical role of the first coordination sphere of precious metals in both the thermodynamics and kinetics of ORR, when anchored onto carbon nanomaterial lattices, providing valuable insights for the nanostructured design of efficient carbon-based electrocatalysts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Near-Infrared Light-Accelerated Bioorthogonal Drug Uncaging and Photothermal Ablation by Anisotropic Pd@Au Plasmonic Nanorods

  • Ortega-Liebana, M. Carmen
  • Travnickova, Jana
  • Adam, Catherine
  • González-Calderón, Davir
  • Lorente-Macías, Álvaro
  • Lochenie, Charles
  • Arenal, Raul
  • Patton, E. Elizabeth
  • Unciti-Broceta, Asier
Selective activation of chemotherapeutics at the tumor site via bioorthogonal catalysis is a promising strategy to reduce collateral damage to healthy tissues and organs. Despite significant advances in this field, targeted drug activation by transition-metal catalysts is still limited by insufficient spatiotemporal control over the metal-mediated uncaging process. Herein, we report the development of anisotropic Pd@Au plasmonic nanorods with the capacity to accelerate dealkylation reactions under near-infrared (NIR) irradiation, thereby enabling precise control over when and where these catalytic devices are switched on. We also show that the stability and in cellulo chemical properties of Pd@Au nanorods are enhanced by Au–S functionalization with PEGylated phospholipids and report the development of a novel masking group for prodyes and prodrugs: the POxOC group, designed to improve physicochemical properties and the rate of the Pd-triggered dye/drug release process. NIR-photoactivation of lipo-Pd@Au nanorods is able to catalyze the uncaging of inactive drug precursors and release heat to the environment, killing cancer cells in culture and xenografted in zebrafish. This work provides a novel targeted strategy for photothermal chemotherapy by NIR-laser focalization.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Phase Stability and Structural Evolution of Core/Shell Iron Oxide Nanoparticles Due to Oxidative Diffusion: Implications for Spintronic Applications

  • Nuñez, Jorge M.
  • Lima, Enio
  • Lohr, Javier Hernán
  • Vásquez Mansilla, Marcelo
  • Zysler, Roberto D.
  • Tolley, Alfredo
  • Bartolomé, Fernando
  • Rubín, Javier
  • Hettler, Simón
  • Arenal, Raúl
  • Aguirre, Myriam Haydee
  • Winkler, Elin L.
Core/shell iron oxide nanoparticles are promising candidates for spintronic applications due to their tunable magnetic properties and interfacial exchange interactions that allow the modulation of spin-polarized conduction. However, their performance depends critically on phase stability and structural integrity under fabrication and operating conditions involving thermal and oxidative diffusion. This study examines the transformation of iron oxide nanoparticles induced by oxidative diffusion in thermal annealing from wüstite to hematite through an intermediate (wüstite)-core/(magnetite–maghemite)-shell structure. The nanoparticles exhibit a rounded cubic morphology, with a distorted C2/m FeO phase at the core under compressive strain along (010), while the Fe3O4 shell exhibits tensile strain along (110). Oxygen diffusion occurs preferentially along [100] from the cube faces, influencing shape evolution. The system exhibits an exchange bias field of up to 3 kOe and enhanced magnetic hardening of up to 4 kOe, attributed to interfacial exchange interactions. Higher annealing temperature promotes the formation of γ-Fe2O3 with ordered vacancies. The exchange bias effect persists, even when the FeO core is smaller than 1 nm in size, indicating that the strain stabilizes the antiferromagnetic (AFM) order and enhances core/shell magnetic coupling. As oxidation proceeds, strain is gradually relaxed, and at 873 K, the oxidation to hematite is promoted, characterized by a Morin transition at 245 K. These findings reveal the intricate relationship between oxidation-driven structural evolution and magnetic behavior in engineered nanoparticle systems, underscoring the critical importance of material selection tailored to specific fabrication processes, operating conditions, and device performance requirements.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unraveling the Decomposition Pathways of LaS-TaS<sub>2</sub> Misfit-Layered Compound Nanostructures under Extreme Electrical Currents by In Situ TEM

  • Hettler, Simon
  • Sreedhara, MB
  • Tenne, Reshef
  • Arenal, Raúl
Nanostructures of the misfit-layered compound (MLC) LaS-TaS2 are brought to breakdown by application of high electrical currents within a transmission electron microscope. Imaging, diffraction, and spectroscopy techniques are employed to study their decomposition process and the resulting structures. The main decomposition route is the breakdown of the TaS2 layers, which induces the formation of metallic Ta on the surface of the nanostructures when the critical current density is surpassed. This observation confirms the assumption that TaS2 is the current-carrying layer in these types of MLCs. The different behavior of tubular 1D and 2D structures is revealed, and a metallic glass phase made of La, Ta, and S could be observed upon exceeding a threshold current. The work shows how in situ transmission electron microscopy can help understand the breakdown mechanism of electrical devices or connectors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhanced plasma-assisted CO2 methanation on Ru/CeO2 catalysts

  • Musig, Beatrice
  • Barauna, Jairo
  • Roy, Abhijit
  • Arenal, Raul
  • Gálvez, María Elena
  • García, Tomás
  • Murillo, Ramón
  • Navarro, María Victoria
Methanation process utilizes CO₂ as a carbon feedstock for synthesizing energy carriers and value-added chemicals. The combination of methanation with plasma-catalysis has emerged as a promising avenue for the electrification of power-to-gas technologies, representing a significant development in the transition to sustainable energy systems. The present study investigates the impact of low 5 % mol Ru loading on CeO2, focusing in the role of the metal in comparison to Ni and the metal-support interactions examined using CeO2 with different structures (nanoneedles, nanopowder) and Ru dispersion within the support. The catalyst Ru/NN with nanoneedles of ceria achieved CO₂ conversion of 70 % and CH₄ selectivity of 99 % at 1CO₂/4H₂, WHSV of 30 L h−1 gcat-1, 12 kgCO2 kgcat-1 h−1 and plasma input power of 8.9 W. The enhanced plasma-catalytic activity of Ru/NN can be attributed to the increased effective H2 dissociation, beneficial physicochemical and electrical properties attributed to the choice of support and optimal metal-support interaction. The lower dielectric capacitance calculated for this catalyst is the result of reduced charge storage and a faster response to the applied electric field. This produces less intense microdischarges and a more stable and uniform plasma environment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Degenerate Monolayer Ising Superconductors via Chiral‐Achiral Molecule Intercalation

  • Margineda, Daniel
  • Álvarez-García, Covadonga
  • Tezze, Daniel
  • Gerivani, Sanaz
  • Caldevilla-Asenjo, David
  • Furqan, Mohammad
  • Rivilla, Iván
  • Casanova, Fèlix
  • Arenal, Raul
  • Artacho, Emilio
  • Hueso, Luis E.
  • Gobbi, Marco
Engineering unconventional superconducting states is a central challenge in condensed matter physics. Molecule-intercalated TaS2 superlattices have recently been reported to host such states, yet their origin remains debated-underscoring the urgent need for controlled, device-integrated studies. Here, we report that nanometer-thick TaS2 and NbSe2 intercalated with chiral and achiral organic cations instead exhibit robust monolayer-like Ising superconductivity, with no evidence of unconventional pairing. Using high-quality superlattices integrated into devices, we disentangle the roles of interlayer coupling and charge transfer in shaping their superconducting behavior. In TaS2, intercalation induces interlayer decoupling regardless of molecular size or symmetry, yielding monolayer-like Ising superconductivity. NbSe2 instead retains quasi-3D transport, with a gradual Ising enhancement and near-monolayer behavior only at the largest interlayer spacing. Transport remains reciprocal across all superlattices, showing no measurable signatures of inversion-symmetry breaking. The data are consistent with electronically detached monolayers with opposite spin-split bands, coupled through thermal and tunneling processes. In this scenario, supported by DFT calculations, inversion symmetry is preserved. These findings establish molecular intercalation compounds as a robust, device-ready, platform for engineering advanced superconducting superlattices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The role of mild microwave irradiation in liquid-phase graphene oxide reduction toward aqueous dispersions and conductive films

  • Benito, A.M.
  • Galán-González, A.
  • Arenal, R.
  • Ansón-Casaos, A.
  • Maser, W.K.
The scalable and sustainable production of high-quality, solution-processable graphene materials remains a central challenge in nanomaterial research. This study investigates the reduction of graphene oxide (GO) in aqueous dispersions using low-power microwave (MW) irradiation and conventional thermal reflux, comparing four common chemical reductants, ascorbic acid, glucose, hydrazine, and sodium borohydride, alongside a reductant-free route. MW irradiation at 200 W induces rapid deoxygenation and enhancement of sp2-domain signatures within seconds, whereas reflux requires extended heating to achieve comparable effects. XPS and Raman analyses reveal that MW treatment promotes a more uniform reduction across reductants and leads to significantly larger apparent crystallite sizes (La) than reflux. Importantly, although chemical reductants remain active under MW conditions, their influence on structural reorganization and electrical performance is considerably diminished, demonstrating that MW field itself governs defect elimination and sp2-domain enrichment under these mild aqueous conditions. The reductant-free MW route yields the highest conductivity (88.4 S/m for 150 nm films) and the largest sp2-domains among all samples. Combined spectroscopic, electrical, and electronic microscopy evidence supports a mechanism in which MW irradiation selectively removes highly defective, oxygen-rich, and sp3-hybridized regions rather than reconstructing the graphene lattice, thereby enriching the remaining framework in extended sp2 networks. Overall, these results position mild MW irradiation as a rapid, and scalable strategy for producing structurally enhanced, water-dispersible rGO dispersions suitable for solution-processed graphene films.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A large interlaboratory electron diffraction study of monolayer graphene

  • Tillotson, Evan
  • Thornley, William
  • Talbott, William
  • Eggeman, Alexander S
  • Kriuchkova, Daria
  • Sullivan-Allsop, Sam
  • Smith, Matt
  • Liu, Xuzhao
  • Slattery, Ashley
  • Yap, Pei Lay
  • Losic, Dusan
  • Xu, Zhun
  • Wang, Huan
  • Ciston, Jim
  • Rakowski, Alexander
  • Ribet, Stephanie M
  • Savitzky, Benjamin H
  • Schuster, Manfred E
  • Allen, Christopher S
  • Douglas-Henry, Danielle
  • Nicolosi, Valeria
  • Herzing, Andrew
  • O’Connell, Jacques
  • Olivier, Ezra J
  • Neethling, Jan
  • Zou, Yi-Chao
  • Duran, Ercin
  • Cai, Rongsheng
  • Ngo, Duc-The
  • Gorbachev, Roman
  • Haas, Jonas
  • Schlegel, Michael
  • Meyer, Jannik
  • Centeno, Alba
  • Pesquera, Amaia
  • Zurutuza, Amaia
  • Kang, Sungsu
  • Park, Jungwon
  • Erofeev, Ivan
  • Mirsaidov, Utkur
  • Ophus, Colin
  • Rentenberger, Christian
  • Waitz, Thomas
  • Kotakoski, Jani
  • Roy, Abhijit
  • Arenal, Raul
  • Pollard, Andrew J
  • Haigh, Sarah J
Standardisation of data collection and analysis is essential to enable commercialisation of 2D materials in a wide range of technologies. Selected area electron diffraction (SAED) in the transmission electron microscope (TEM) is one of the key methods for distinguishing monolayer from bilayer and few-layer graphene by comparing the 1st and 2nd order diffraction spot intensities. Yet there are many factors that can affect the reliability of data collection and interpretation, causing the measurement of monolayer samples to deviate from the literature boundary condition of I-{2 & strns;110}/I-{11 & strns;00}< 1 for monolayer graphene (1LG). Here we present the results of a large interlaboratory SAED comparison study, where 15 international laboratories measured and analysed nominally identical samples of chemical vapour deposited graphene. Large variations were observed in the measured ratios of diffraction spot intensities, with the largest variance associated with poor quality SAED data resulting from inadequate specimen handling and storage. To inform the reliable determination of monolayer thickness from SAED patterns we provide a description of best practice for specimen handling, TEM operation, data collection and analysis. This work was undertaken within VAMAS Technical Working Area 41: Graphene and related 2D materials-Project 9, the results of which have been directly incorporated into ISO/TS 21356-2 for the characterisation of graphene sheets. We find that when this methodology is followed, 1LG can be distinguished from bilayer or thicker material with high confidence where analysis of a single SAED pattern gives I-{2 & strns;110}/I-{11 & strns;00}< 1.2, even in the absence of precise specimen tilting.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mechanical and electrical properties of a nano-gap or how to play the nano-accordion

  • Hettler, Simon
  • Arenal, Raul
In-situ transmission electron microscopy (TEM) has become an important technique to study dynamic processes at highest spatial resolution and one branch is the investigation of phenomena related with electrical currents. Here, we present experimental results obtained from a peculiar insitu TEM device, which was prepared with the aim to analyze the relationship between (thermo) electric properties and specific crystal orientations of a misfit layered compound. The formation of a nano-sized gap at a grain boundary facilitated a precisely controllable mechanical bending of the device by application of differential heating currents. The devices’ electrical properties were found to be substantially influenced by the gap, leading to a high intrinsic voltage. This voltage additionally depends on the vacuum environment and on the history of applied heating currents with internal field strengths of up to 37 kV m−1 . These findings are largely attributed to the presence of adsorbed molecules within the gap region. The electrical in-situ TEM studies of this work illustrate that interior surfaces can strongly influence electrical properties even under high vacuum conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tuning the Nonlinear Optical Properties of MoS <sub>2</sub> by Interfacing with Bay- or Imide-Substituted Perylene Diimides

  • Nikoli, Eleni
  • Canton-Vitoria, Ruben
  • Skentzos, Georgios
  • Pramatioti, Efrosyni
  • Zink-Lorre, Nathalie
  • Gutiérrez-Vílchez, Ana Maria
  • Fernández-Lázaro, Fernando
  • Arenal, Raul
  • Couris, Stelios
  • Tagmatarchis, Nikos
We have investigated the tuning of nonlinear optical (NLO) properties in semiconducting MoS2 nanosheets through covalent functionalization with bay- or imide-substituted perylene diimide (PDI) derivatives. Five MoS2–PDI hybrid nanomaterials 1a–5a were synthesized by attaching PDI variants featuring azobenzene or other substituents, characterized via Raman, IR, TGA, STEM-EDS, ultraviolet–visible (UV–vis), photoluminescence, and electrochemical analyses, and evaluated for NLO response under nanosecond (4 ns, 1064/532 nm) and femtosecond (70 fs, 800/400 nm) laser excitations. The hybrids exhibit enhanced and tunable NLO-absorptive (switching from saturable to reverse-saturable absorption with intensity) and NLO-refractive (self-focusing) responses compared to exfoliated MoS2, with 1a and 2a (azobenzene-substituted PDIs) showing the strongest effects due to efficient electron-transfer and -resonant excitations. Hybrids demonstrate superior NLO susceptibility (χ3) values, particularly under resonant 532 nm excitation, with Im{χ3} values of up to −514.7 ± 57.4 × 10–13 esu·mL/mg for 2a at low intensities, attributed to Pauli blocking, defect states, and two-photon processes. Hybrids having bay-substituted PDIs grafted on MoS2 enhance conjugation and performance over imide variants, enabling applications in optical-limiting, mode-locking, and photonic devices. Threshold intensities for NLA switching (150–250 MW/cm2) exceed those of MoS2, highlighting the stability for high-power uses. The developed hybrid materials advance two-dimensional transition-metal dichalcogenide-based optoelectronics by overcoming light–matter interaction limits through molecular antenna effects from PDIs. The study underscores the substituent position and azobenzene integration as levers for NLO optimization in hybrid nanoarchitectures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

F-diamane synthesis through ball-milling exfoliation of fluorinated expandable graphite

  • Haddad, G.
  • Nomède-Martyr, N.
  • Bilas, P.
  • Furqan, M.
  • Reveret, F.
  • Bourgogne, D.
  • Petit, E.
  • Sarr, M.
  • Radescu, S.
  • Arenal, R.
  • Chen, S
  • Dubois, M.
Diamane, a two-dimensional diamond-like nanomaterial, has gained significant attention due to its outstanding physicochemical properties and potential applications in nanoelectronics, optics, energy devices, and quantum technologies. Here, we report a rapid, scalable method to produce fluorinated diamane (F-diamane) nanosheets via mechanical grinding in liquid media, using pre-exfoliated graphite fluoride enriched in (C2F)n to enhance yield. Comprehensive characterization confirms the formation of F-diamane-type materials. DFT calculations reveal that its superior mechanical strength and rigidity compared to fluorographene, combined with the higher stiffness of (C2F)n and the easier exfoliation of (CF)n, drive phase enrichment during processing, ultimately increasing the F-diamane content in the dispersions. The photoluminescence properties with a maximum emission when the excitation wavelength is 325 nm. Moreover, the band gap of F-diamane-type layers is found at 3.84 eV.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Intercalated carbon nanotube fibers with high specific electrical conductivity

  • de Isidro-Gómez, A. I.
  • Vassilev-Galindo, V.
  • Mikhalchan, A.
  • Pelaez-Fernandez, M.
  • LLorca, J.
  • Arenal, R.
  • Vilatela, J. J.
Translating the conductivity of individual carbon nanotubes into practical, macroscopic conductors remains a challenge. We report highly aligned fibers of double-walled carbon nanotubes intercalated with chains of tetrachloroaluminate anions (AlCl4−) in the intertube channels. The AlCl4− intercalant acts as a noncovalent dopant, accepting 0.65 electrons per anion, mostly from the outer nanotube layer. Combined with a 17% intercalant volume fraction, it produces an increase in room-temperature conductivity to values as high as 24.5 mega-Siemens per meter, which is 41% of that of copper. Specific conductivity values reach 17,345 Siemens-meter squared per kilogram, which is superior to that of metals. These fibers are five times stronger and half the weight of conventional overhead cables while remaining stable in dry conditions and retaining 80% of their conductivity protected from moisture by a cable polymer sheath.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Controlled one-pot fluorination for F, B, S or N tri-doping of graphene

  • Eraky, Mostafa S.
  • Haddad, Guillaume
  • Clavier, Batiste
  • Furqan, Mohammad
  • Batisse, Nicolas
  • Fahrat, Hani
  • Petit, Elodie
  • Flahaut, Emmanuel
  • Page, Alister J.
  • Liu, Chengyi
  • Chen, Sam
  • Arenal, Raul
  • Dubois, Marc
Heteroatom doping of graphene effectively modifies surface charge, defect density, and electronic structure, with multi-heteroatom co-doping enhancing bond polarization, charge redistribution, and electrochemical performance for advanced energy storage, conversion, and other technological applications. In this work, we report a one-step synthesis of di- and tri-doped graphene via the simultaneous incorporation of fluorine and boron into pristine as well as S- and N-doped graphene, starting from commercially available N- or S-doped graphene. Mild gas–solid fluorination was performed using elemental fluorine diluted in an inert nitrogen atmosphere at controlled temperatures. The presence of a boron-containing precursor enables the in situ generation of BF3, which acts as an effective boron-doping agent during the fluorination process. This approach allows, for the first time, the controlled synthesis of F/B/S-, and F/B/N- tri-doped graphene materials through a single-step reaction. The doping mechanisms and structural evolution were elucidated using complementary characterization techniques, including Fourier-transform infrared (FTIR) spectroscopy, solid-state nuclear magnetic resonance (NMR) spectroscopy (19F, 11B and 13C), thermogravimetric analysis (TGA) coupled with mass spectrometry (MS) and infrared spectroscopy (IR), and X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and (scanning)transmission electron microscopy ((S)TEM). The results demonstrate that hexagonal boron nitride and molecular fluorine act as precursors for the in situ generation of BF3, which, together with F2, enables efficient and homogeneous incorporation of fluorine and boron into heteroatom-doped graphene carbon frameworks.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Highly Transparent Gallium-Doped Zinc Oxide Nanosheets Enabling Stable All-in-One Red-Green-Blue Photodetectors with High Responsivity

  • Meelab, Vivid
  • Canton-Vitoria, Ruben
  • Furqan, Mohammad
  • Morita, Yoshinori
  • Morita, Shu
  • Yamamoto, Eisuke
  • Kobayashi, Makoto
  • Arenal, Raul
  • Osada, Minoru
Two-dimensional zinc oxide nanosheets are attractive building blocks for ultrathin optoelectronic devices because of their high optical transparency and chemical stability; yet their weak visible-light response has hindered practical applications. Here, we demonstrate gallium-doped zinc oxide nanosheets as highly transparent and thermally robust platforms for all-in-one red-green-blue photodetectors. Gallium-doped nanosheets are synthesized via ionic layer epitaxy with precise compositional control. Structural, optical, and electrical analyses reveal that gallium doping concurrently enhances multiple properties, leading to improved photodevice performance. Gallium-doped zinc oxide nanosheets exhibit responsivities of up to 800 A W–1, carrier mobilities of 1.94 cm2 V–1s–1, and an average visible transmittance of 99.995% per nanosheet, enabling broadband photodetection without sacrificing optical throughput. Owing to their solution processability, the nanosheets can be vertically assembled into Bayer-like stacked architectures that decode red, green, and blue signals within a single pixel. Notably, the stacked photodetectors maintain stable photoresponse and excellent thermal and oxidative stability up to 450 °C, highlighting their promise for high-density, ultracompact color imaging technologies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis, Characterization, and Optical Properties of Undoped and Te-Doped W(SxSe(1−x))2 and Core-Shell WS2@W(SxSe(1−x))2 Nanotubes

  • Nathaniel Immanuel, Philip
  • Prasad, Neena
  • Puravankara, Akshay
  • Kusak, Stepan
  • Rosentsveig, Rita
  • Feldman, Yishay
  • Eden-Kossoy, Anna
  • Kaplan-Ashiri, Ifat
  • Kundrat, Vojtech
  • Arenal, Raul
  • Tenne, Reshef
  • Yadgarov, Lena
WS2 nanotubes (NTs) are layered transition-metal dichalcogenides whose diameter strongly influences strain and optical properties. Alloying sulfur with selenium in W(SxSe1−x)2 NTs provides compositional tunability, yet the link between precursor composition, alloy formation, and optical response remains unclear. In this work, W(SxSe1−x)2 (WSSe) NTs with controlled S/Se ratios were synthesized and characterized using Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, STEM-EDS, and X-ray diffraction. The synthesis produced high yields of small-diameter NTs (<30 nm). Compositional analysis revealed sulfur enrichment relative to the nominal precursor ratio, while the interlayer spacing increased from 0.62 to 0.66 nm with increasing selenium content. To examine incorporation of heavier chalcogens, tellurium (Te) was introduced during synthesis. Owing to its larger atomic radius and lower chemical reactivity compared with sulfur and selenium, Te incorporation presents a significant kinetic limitation during NT growth. Elemental analysis shows that Te is incorporated only at trace dopant levels (<1 at%) rather than forming a quaternary alloy phase. Despite this low incorporation, Te doping induces a measurable red shift of the A-exciton transition, indicating a slight reduction in bandgap energy. Core–shell WS2@WSSe NTs were also synthesized, exhibiting nonlinear optical effects. These findings may enable alloyed TMD NTs for nanoscale optoelectronic and photodetection devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Copper(I) Oxo Species in Cu/ZnO Catalysts and Its Role in the Methanol Synthesis from CO2 Hydrogenation

  • Soriano, J.
  • Fo, Y.
  • Gómez, D.
  • Nieto, J.M. López
  • Roy, A.
  • Manzorro, R.
  • Arenal, R.
  • Calvino, J.J.
  • Song, W.
  • Concepción, P.
This study reveals the presence of low-atomicity copper(I) oxo clusters strongly anchored to ZnO in commercial-type Cu/ZnO catalysts that, coexisting with metallic copper nanoparticles, play a critical role in CO2 hydrogenation. Their detection is challenging because metallic copper nanoparticles dominate the catalyst surface and these clusters appear in low amounts. Nevertheless, definitive evidence of their existence comes from the combination of in situ Raman spectroscopy, temperature-programmed CO surface reaction (TPSR-CO), time-resolved kinetic studies, and advance microscopy studies (STEM-XEDS and STEM-EELS). Catalytic studies combined with density functional theory (DFT) calculations demonstrate its critical role in methanol production and their size-dependent contribution to the total activity compared to traditional Cu-ZnO interfacial sites. According to DFT studies, CO2 adsorption is significantly more favorable on small Cu14O7 and Cu32O16 clusters than on extended Cu2O (111) (110) facets, metallic copper, or conventional metal-support interfacial sites. Moreover, the stabilization of carboxyl rather than formate-like intermediates follows a similar trend than the methanol production, being preferential on small Cu14O7 and Cu32O16 clusters, underlying a carboxyl-type intermediate path in methanol production.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Investigation of the chemical structure of core–shell Fe3O4@Ni1−xCoxFe2O4 nanoparticles and its influence on their magnetic properties

  • Lopez-Martin, Raul
  • Makarchuk, Iryna
  • Choueikani, Fadi
  • Hettler, Simon
  • Arenal, Raul
  • De Toro, Jose A.
  • Pichon, Benoit P.
Core–shell ferrite nanoparticles offer a promising route toward high-performance, rare-earth-free magnetic nanomaterials, yet fine control over interfacial exchange coupling remains a critical challenge. Here, we report the synthesis of Fe3O4@Ni1−xCoxFe2O4 nanoparticles via a two-step seed-mediated thermal decomposition process in organic media, enabling systematic tuning of the shell composition and size of the pristine Fe3O4 nanoparticles. High-resolution scanning transmission electron microscopy (STEM) and electron energy loss spectroscopy (EELS) analyses confirm the formation of an epitaxial spinel shell, with excellent crystallographic continuity and homogeneous spatial cation distribution. X-ray absorption spectroscopy (XAS) and X-ray magnetic circular dichroism (XMCD) reveal that Co2+ and Ni2+ cations preferentially occupy octahedral sites while a minor -but significant-Ni1−xCoxO wüstite phase forms at the periphery, as also suggested by microscopy, introducing small exchange-bias effects. Alongside the exchange bias effect, a comprehensive magnetic characterization using SQUID magnetometry revealed the role of both the shell composition and the surface anisotropy, the latter being dominant over the shell composition when the core nanoparticle size was reduced. This multi-technique study unveils the formation mechanism of such core–shell bimagnetic nanoparticles and the intricate interplay between composition, interface structure, and magnetic behavior. It provides a potential framework for designing chemically engineered, anisotropy-tailored magnetic nanostructures for spintronic, biomedical, and high-density data storage applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Stepwise seed-mediated growth of multiphase spinel@Wüstite Core–Shell nanoparticles with exchange-coupled magnetic properties

  • Sartori, Kevin
  • Choueikani, Fadi
  • Hettler, Simon
  • Arenal, Raul
  • Pichon, Benoit P.
A series of exchange-coupled magnetic nanoparticles featuring multiple magnetic phases arranged in a core-shell architecture was synthesized through a three-step seed-mediated growth process. Iron, cobalt, and nickel precursors were sequentially thermally decomposed in high-boiling-point solvents (approximately 300 °C), enabling the successive growth of CoO and NiO shells on Fe₃O₄ nanoparticle's cores. The structural and chemical characteristics of these nanoparticles were thoroughly investigated using a combination of advanced analytical techniques, including scanning transmission electron microscopy (STEM) in high-angle annular dark-field imaging mode (HAADF), electron energy-loss spectroscopy STEM (EELS-STEM), and X-ray magnetic circular dichroism (XMCD). After each thermal decomposition step, the nanoparticle size progressively increased, accompanied by noticeable changes in morphology, indicating significant surface reconstruction. Furthermore, the chemical structure proved to be more complex than initially anticipated. The high synthesis temperature promoted cation interdiffusion at the interfaces as well as partial dissolution–recrystallization processes at the nanoparticle surface. An intermixed Co/Ni shell, composed of a combination of wüstite and spinel phases, was found to influence the magnetic properties of the nanoparticles through exchange bias coupling. This effect is directly correlated with the relative proportions of Co and Ni cations incorporated within the shell.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Site Density Governs Switching Reactivity Regimes During Aerobic C─H Oxidation in Mn Single-Atom Photocatalysts

  • Velichko, Viktoria
  • de Arriba, Agustín
  • Moutsiou, Areti
  • Inico, Elisabetta
  • Olivati, Andrea
  • Pérez-Román, Berta
  • López-Sánchez, Jesús
  • Kwon, Ik Seon
  • Tonelli, Andrea
  • Roy, Abhijit
  • De Renzi, Valentina
  • Arenal, Raul
  • Petrozza, Annamaria
  • Cavallotti, Carlo
  • Vilé, Gianvito
Understanding how the density of isolated metal sites affects the structure and function of single-atom catalysts remains a central challenge, particularly for photocatalysts based on polymeric semiconductors. In this study, we show that Mn incorporation in carbon nitride-supported single-atom photocatalysts (Mn1@CNx) triggers a regime transition without detectable Mn aggregation. At low-to-intermediate loadings, isolated Mn–Nx sites are accommodated within a partially delaminated CNx framework, promoting productive carrier trapping, oxygen activation, and selective aerobic benzylic C–H oxidation. Above a critical loading, however, Mn incorporation reorganizes the support into a distorted and densified architecture, modifies the Mn coordination environment, and shifts carrier dynamics toward unproductive recombination. Structural, spectroscopic, and computational analyses connect this transition to framework stacking, electronic disorder, and Mn-support coupling. During selective aerobic benzylic C–H oxidation, we show that this regime transition translates into a nonmonotonic activity response, in which additional isolated Mn sites become detrimental once support reorganization overrides the benefit of increased site density. Mechanistic experiments and theory support a photoinduced oxygen activation, with the productive regime enabled by the balance between isolated Mn sites and a favorable CNx trap-state landscape. These findings establish single-atom site density as a structural and photophysical design parameter for polymer-supported photocatalysts.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Intercalated carbon nanotube fibers with high specific electrical conductivity

  • De Isidro Gómez, Ana Inés
  • Vassilev-Galindo, Valentín
  • Mikhalchan, Anastasiia
  • Peláez-Fernández, Mario
  • LLorca, Javier
  • Arenal, Raúl
  • Vilatela, Juan José
Publicado: 2026-04-23, Translating the conductivity of individual carbon nanotubes into practical, macroscopic conductors remains a challenge. We report highly aligned fibers of double-walled carbon nanotubes intercalated with chains of tetrachloroaluminate anions (AlCl4-) in the intertube channels. The AlCl4- intercalant acts as a noncovalent dopant, accepting 0.65 electrons per anion, mostly from the outer nanotube layer. Combined with a 17% intercalant volume fraction, it produces an increase in room-temperature conductivity to values as high as 24.5 mega-Siemens per meter, which is 41% of that of copper. Specific conductivity values reach 17,345 Siemens-meter squared per kilogram, which is superior to that of metals. These fibers are five times stronger and half the weight of conventional overhead cables while remaining stable in dry conditions and retaining 80% of their conductivity protected from moisture by a cable polymer sheath., EU UNIYARNS ERC-Consolidator Grant 101045394 (J.J.V.); USA Air Force Office of Scientific Research Grant FA8665-23-1-7052 (J.J.V.); CESA/Héroux-Devtek Spain (J.J.V.); Government of Aragon (DGA) through the project E13 23R (R.A.). The '(MAD2D-CM)-UCM' project is funded by Comunidad de Madrid; the Recovery, Transformation, and Resilience Plan; and Next Generation EU from the European Union Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI /10.13039/501100011033) (R.A.).