Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Mapping carbon nanotube aspect ratio, concentration and spinning in FCCVD synthesis controlled by sulphur

  • Vázquez Pufleau, Miguel
  • Fernández Torres, Raúl
  • Arévalo Nogales, Luis
  • Abomailek, Nabil
  • Vilatela García, Juan José
Floating catalyst chemical vapor deposition (FCCVD) enables ultrafast synthesis of CNTs and other 1D nanoparticles and their direct assembly as macroscopic solids. The chalcogen growth promotor in FCCVD produces high aspect ratio CNTs that can aggregate in the gas phase and form an aerogel which can be continuously spun as macroscopic fibres or sheets. We study the role of sulphur in controlling CNT morphology and aggregation by synthesising CNTs under a wide range of S/C ratios (0.001 to 5 wt.%) and determining their diameter and length distributions, number concentration and form of aggregation. Increasing S/C ratio in this range increases mean number of CNT walls from 1 to 8, decreases mean length from 34 to 6 μ, but CNT number concentration remains approximately constant at 8 x 10 8 #/cm3. Assuming growth within the first 3 cm of the reactor, longitudinal growth rate spans 1.5- 6.5 μ/s for the different CNT morphologies, but with similar mass throughput of 700 attogram/catalyst. This indicates the amount of carbon reaching the catalyst and solidifying as CNT remains constant regardless of the sulphur available in the catalyst, suggesting the rate limiting process is not at the catalyst/promoter interface but instead in the transport of carbonaceous active precursors to the catalyst, either due to their diffusion in the gas phase or decomposition kinetics. The CNTs produced range from polymer-like, which readily bundle and form aerogels, to rod-like that do not. We include aerogelation 'phase diagrams' for different CNT concentrations, aspect ratios and CNT bending stiffness., We are thankful to Dr. Manuel Avella for his help in characterizing the samples by TEM. Work carried out in the frame of the ERC CONSOLIDATOR GRANT Universal processing route for high performance nanostructured yarns (UNIYARNS) under contract 101045394 funded by the European Commission. This work was also supported by the MSCA Fellowship SUPERYARN under grant number: 101029091.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intercalated carbon nanotube fibers with high specific electrical conductivity

  • Isidro Gómez, Ana Inés de
  • Vassilev, Stanislav V.
  • Mikhalchan, Anastasiia
  • Peláez-Fernández, Mario
  • Llorca, Jordi
  • Arenal, Raúl
  • Vilatela, J. J.
Translating the conductivity of individual carbon nanotubes into practical, macroscopic conductors remains a challenge. We report highly aligned fibers of double-walled carbon nanotubes intercalated with chains of tetrachloroaluminate anions (AlCl4−) in the intertube channels. The AlCl4− intercalant acts as a noncovalent dopant, accepting 0.65 electrons per anion, mostly from the outer nanotube layer. Combined with a 17% intercalant volume fraction, it produces an increase in room-temperature conductivity to values as high as 24.5 mega-Siemens per meter, which is 41% of that of copper. Specific conductivity values reach 17,345 Siemens-meter squared per kilogram, which is superior to that of metals. These fibers are five times stronger and half the weight of conventional overhead cables while remaining stable in dry conditions and retaining 80% of their conductivity protected from moisture by a cable polymer sheath., EU UNIYARNS ERC-Consolidator Grant 101045394 (J.J.V.); USA Air Force Office of Scientific Research Grant FA8665-23-1-7052 (J.J.V.); CESA/Héroux-Devtek Spain (J.J.V.); Government of Aragon (DGA) through the project E13 23R (R.A.). The “(MAD2D-CM)-UCM” project is funded by Comunidad de Madrid; the Recovery, Transformation, and Resilience Plan; and NextGenerationEU from the European Union Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI /10.13039/501100011033) (R.A.)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Network structure enabling re-use and near full property retention in CNT sheets recycled from thermoset composites

  • Mikhalchan, Anastasiia
  • Lozano, Sergio|||0009-0003-9209-2300
  • Fernández Gorgojo, Andrea|||0000-0002-4582-8392
  • González Martínez, Carlos Daniel|||0000-0002-0724-138X
  • Vilatela, Juan José|||0000-0002-2572-0245