Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mixed metal oxide bronzes as catalysts for the gas-phase aerobic transformation of glycerol to acrylic acid: Single or double catalytic bed approaches

  • De Arriba-Mateos, Agustín
  • Delgado-Muñoz, Daniel
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Metal-doped hexagonal tungsten oxide bronzes (h-WVOx and h-WNbOx) and metal-doped orthorhombic molybdenum oxide bronzes-M1 type (MoVOx, MoVTeOx and MoVTeNbOx) have been synthesized hydrothermally and heat-treated at 400, 550 or 600 degrees C in N-2. The catalysts were characterized by several techniques and tested in the one-pot aerobic transformation of glycerol at 350 degrees C. From all of them, h-WNbOx resulted as the most selective to acrolein (80 % yield), whereas both h-WVOx and MoVTeNbOx were more effective to acrylic acid (with a yield lower than 25 %). Subsequently, a double-bed reactor comparative study was conducted, with h-WNbOx acting as the first catalytic bed. In this case, the yield to acrylic acid decreased as follows: MoVTeNbOx > MoVTeOx > MoVOx > h-WVOx. IR spectroscopy of acrolein adsorbed on these catalysts allows to explain the catalytic performance of these catalysts., The funding received for this study from the Spanish Ministry of Science and Innovation, PID2021-126235OB-C31 funded by MCIN/AEI/10.13039/501100011033 and FEDER funds, and project TED2021-130756B-C32 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR, is acknowledged. This Special Issue is dedicated to honor the 10th International Symposium on Group V (IV and VI) Elements, a gathering of interna-tional researchers, industry, young researchers, and students to help shape the vision of the future for these elements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimizing the electrocatalytic hydrogen production with vanadyl porphyrin impregnated on mesoporous SiO2 nanoparticles

  • Myltykbayeva, Zhannur
  • Abylaikhan, Akerke
  • Koca, Atif
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Moreno-Torralbo, Beatriz Maria
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] Vanadyl octaethyl porphyrin (VOP) impregnated on SiO2 nanoparticles ( SiO 2 @VOP ) was investigated as an electrocatalyst for the water-splitting reaction for the cathodic hydrogen evolution reaction (HER). Multi-valent oxidation states of VO2+ center and multi-electron transfer properties of the porphyrin ring made this complex a potential candidate for the electrocatalytic processes. Altering the electrode modification protocol by changing the amount of the VOP, carbon black (CB), and Nafion (Nf) binder on the modification influenced the active sites, thus consequently enhancing the electrocatalytic activity of SiO2@VOP composites. Electrocatalytic HER measurements indicated excellent activity with low overpotential (108 mV), small Tafel slope (98 mV/dec), and high current density stability with the GCE/CB@ SiO 2 @VOP(B) electrode., This work is supported by the Ministry of Science and Higher Education of the Republic of Kazakhstan (AP23486934, Development of new efficient photocatalytic systems for hydrogen production using composites of metal disulfides and petroleum porphyrins") and the Spanish Ministry of Science and Innovation (TED2021-130756B-C32, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring the Photocatalytic and Electrocatalytic activity of Mo and W-based catalysts for overall water splitting process

  • Myltiykbayeva, Zhannur K.
  • Muktaly, DInara
  • Imanbayev, Yerzhan
  • Koca, Atif
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Moreno-Torralbo, Beatriz Maria
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] The research focuses on assessing Mo and W containing catalysts in terms of both photocatalytic hydrogen evolution reaction (HER) and electrocatalytic overall water splitting process. Special attention is given to the structural and electronic parameters of these materials, which contribute to their catalytic efficiency. The results indicated that the S-containing molybdenum-based catalysts heat-treated at 320 ¿C (MoS-A320) shows the highest photocatalytic and electrocatalytic activities among all structures. The hydrogen evolution rate of 1.16 mmol h-1g-1 with good stability indicate its usability in the photocatalytic HER. Electrocatalytic HER measurements indicated that MoS-A320 revealed 73 mV overpotential at 10 mA cm¿² with a Tafel slope of 58 mV dec¿¹. The electrode preserved 93% of its activity during 12 h chronoamperometric testing, closely matching the durability of Pt catalysts. Observation of considerably high oxygen evolution reaction (OER) performances of MoS-A320 indicates its bifunctionality and usability at both anode and cathode of the water electrolyzers. The enhanced photocatalytic activities of MoS-A-320 are explained by the optical and morphological traits which are tailored with the annealing temperature. Additionally enhanced conductivity and high surface area of this structure are the fundamental features for the higher bifunctional electrocatalytic activity. This study provides insights into the design of efficient catalysts for renewable energy conversion and environmental sustainability., This research was financially supported by the Ministry of Science and Higher Education of the Republic of Kazakhstan (AP23486934, Development of new efficient photocatalytic systems for hydrogen production using composites of metal disulfides and petroleum porphyrins). JMLN, BMMT and PC thanks also the financial support from the Spanish Ministry of Science and Innovation, project PID2021 126235OB-C31, funded by MCIN/ AEI/10.13039/501100011033 and FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The role of promoters on the catalytic performance of MxV2O5 bronzes for the selective partial oxidation of H2S

  • Ruiz-Rodríguez, Lidia
  • Vidal Moya, José Alejandro
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • De Arriba-Mateos, Agustín
  • Rodríguez-Castellón, Enrique
[EN] Metal-containing vanadium oxide bronzes (MxV2O5; M= Cu, Ag and Ca) have been prepared, characterized (before and after reaction) by various physicochemical techniques, and tested in the partial oxidation of H2S. The catalysts were prepared hydrothermally at 175 ¿C (from gels containing M/V molar ratios of 0.17 or 0.33) and heat-treated at 500 ¿C/2 h in N2. The most effective catalysts, showing a sulfur selectivity greater than 95 % for a H2S conversion beyond 90 %, were those presenting vanadium oxide bronze (ß-Cu0.261V2O5 or Ag0.333V2O5) as the main crystalline phase. Cu- and Ag-containing vanadium oxide bronzes were stable under reaction conditions. For calcium containing materials (mainly presenting the Ca0.17V2O5 bronze phase), the formation of CaSO4 has been observed during the reaction, which resulted in a negative effect on both activity and selectivity. The nature of active and selective sites in this type of catalysts, as well as the role of promoters, are also discussed., The authors would like to acknowledge the Ministerio de Ciencia e Innovacion of Spain (TED2021-130756B-C31, TED2021-130756B-C32 and MAT2017-84118-C2-1-R projects) . Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329) and Dr. Ferran Sabate from ITQ for his assistance with the EPR data treatment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stabilization of the Active Ruthenium Oxycarbonate Phase for Low-Temperature CO2 Methanation

  • Tebar-Soler, Carmen|||0000-0001-7054-4503
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Diaconescu, Vlad Martin
  • Simonelli, Laura
  • Missyul, Alexander
  • Perez-Dieste, Virginia
  • Villar-Garcia, Ignacio
  • Gómez, Daviel
  • Brubach, Jean-Blaise
  • Roy, Pascale
[EN] Interstitial carbon-doped RuO2 catalyst with the newly reported ruthenium oxycarbonate phase is a key component for low-temperature CO2 methanation. However, a crucial factor is the stability of interstitial carbon atoms, which can cause catalyst deactivation when removed during the reaction. In this work, the stabilization mechanism of the ruthenium oxycarbonate active phase under reaction conditions is studied by combining advanced operando spectroscopic tools with catalytic studies. Three sequential processes: carbon diffusion, metal oxide reduction, and decomposition of the oxycarbonate phase and their influence by the reaction conditions, are discussed. We present how the reaction variables and catalyst composition can promote carbon diffusion, stabilizing the oxycarbonate catalytically active phase under steady-state reaction conditions and maintaining catalyst activity and stability over long operation times. In addition, insights into the reaction mechanism and a detailed analysis of the catalyst composition that identifies an adequate balance between the two phases, i.e., ruthenium oxycarbonate and ruthenium metal, are provided to ensure an optimum catalytic behavior., This research was funded by Ministerio de Ciencia, Innovacion y Universidades, grant number PID2021-1262350B-C31, and Generalitat Valenciana (GVA), grant number CIAICO/2021/2138. This study formed part of the Advanced Materials programme and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) and Generalitad Valenciana (ref MFA/2022/016 and TED2021-130756B-C32). C.T.S acknowledges the Polytechnical University of Valencia for the economic support through the grant of an FPI scholarship associated with the PAID programme "Programa de Ayudas de Investigacion y Desarrollo." XAS, XPS, and XRD experiments were performed at the ALBA Synchrotron with the collaboration of ALBA staff. IR experiments were performed at the SOLEIL Synchrotron with the collaboration of the SOLEIL staff. This research used resources of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science user facility operated for the DOE Office of Science by the Argonne National Laboratory under Contract No.DE-AC02-06CH11357.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Decoding the Role of Isolated Ga+ in PdGa@MFI Catalyst Promoting a Direct CO2 Hydrogenation Path to DME

  • Zhao, Minjie
  • Diaconescu, Vlad Martin
  • Simonelli, Laura
  • Haro, ML
  • Calvino, JJ
  • Gómez-Acosta, Daviel|||0000-0003-0010-4507
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] This work presents a strategy to control not only the distance and proximity of active sites at the atomic or nanoscale but also the nature of sites in zeolite-based catalysts, promoting the coupling rate of surface intermediate species and accordingly the formation rate of dimethyl ether (DME) by a direct CO2 hydrogenation path. We use a one-pot synthesis strategy and a thermal-induced detachment process of framework elements, such as Ga3+ ions, to stabilize PdGa alloys and Ga+ sites in close proximity to Br & oslash;nsted acid sites under reductive conditions. Using this strategy, a production of oxygenates of up to 42,864 gMeOH+DME<middle dot>kgPd -1<middle dot>h-1 at 45 bar, 260 degrees C, and WHSV = 15,000 mL<middle dot>gcat -1<middle dot>h-1, is obtained with 80% selectivity to oxygenated (19% methanol/61% DME), outperforming the most active Pd-based CO2 hydrogenation catalysts in the literature. Time-resolved kinetic studies, in situ X-ray adsorption, and in situ and operando IR offer strong proof of the key role of isolated Ga+ Lewis acid sites in close proximity to Br & oslash;nsted acid sites in stabilizing monoformate intermediate species and facilitating the direct production of DME. Finally, this work highlights the key role of the zeolite in metal confinement, conferring excellent stability, oxidation resistance, hydrophilicity, and close proximity of active sites together with the stabilization of low-coordinated Lewis acid sites., P.C. thanks the Ministerio de Ciencia, Innovacion y Universidades, grant no. PID2021-1262350B-C31, and the Generalitat Valenciana (GVA), grant no. CIAICO/2021/2138. P.C. thanks the Advanced Materials programme supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.11) (TED2021-130756B-C32) and by the Generalitat Valenciana (ref MFA/2022/016). M.Z. acknowledges the China Scholarship Council (CSC) for the fellowship. XAS experiments were performed at the ALBA Synchrotron (BL-22 CL AE SS) with the collaboration of the ALBA staff as part of experiment 2022086958. HR-HAADF-STEM measurements were performed at DME-UCA at the Cadiz University. M.L.H. and J.J.C. thank financial support from Projects funded by MICIU/AEI/10.13030/501100011033, PID2020-113006-RB-I00, and PID2022-142312NB-I00, funded by MCIN/AEI/10.13039/501100011033, and by "ERDF A way of making Europe". Project TED2021-130191B-C44, funded by MCIN/AEI/10.13039/501100011033 and the European Union Next Generation EU/PRTR, is also acknowledged. STEM experiments were recorded at the DME-UCA Node of the Spanish Singular Infrastructure for Electron Microscopy of Materials (ICTS ELECMI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Upgrading the reflux method as novel route for competitive catalysts in alkane selective oxidation

  • Masso Ramírez, Amada
  • De Arriba-Mateos, Agustín
  • Ivars Barceló, Francisco
  • Ykrelef, Adel
  • Solsona, Benjamín
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] In the present article we show that, although the reflux method is not common for the synthesis of multicomponent MoVTeNbO catalysts, an optimized reflux synthesis of metallic precursors leads to efficient materials for the oxidative dehydrogenation of ethane and the selective oxidation of propane into acrylic acid, with the results at the same level as those of the best catalysts reported in the literature to date. It has been demonstrated that the reflux temperature is of paramount importance to achieve active and selective catalysts. Thus, the incorporation of vanadium and niobium to a polyoxometalate in the catalyst precursors is favored by refluxing at 110 & DEG;C, promoting the formation of the desired orthorhombic M1 phase. Additionally, the incorporation in the synthesis gel of cations such as ammonium or methylammonium provokes a further improvement of the catalytic performance whenever the activation procedure is carefully controlled., The authors gratefully acknowledge the financial support by the Ministerio de Ciencia e Innovacion of Spain, MINECO/FEDER (Projects: PID2021-126235OB-C31, PID2021-126235OB-C33, TED2021-130756B-C32 and TED2021-129555B-I00). F. Ivars-Barcelo gratefully acknowledges the support from "Ramon y Cajal" excellence program for recruitment (Ref.: RYC2020-029470-I/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unveiling the pathways and site requirements of methanol oxidative dehydrogenation on MoO3/TiO2 catalysts: An operando-FTIR study

  • Galdames, Gabriel
  • Fuentes, Bastian
  • Jiménez, Romel
  • Karelovic, Alejandro
  • Gómez-Acosta, Daviel|||0000-0003-0010-4507
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] Methanol oxidative dehydrogenation was studied on sub-monolayer and crystalline MoO3/TiO2-supported catalysts using operando-FTIR spectroscopy. Results revealed two distinct methyl formate (MF) formation pathways, determined by the molybdenum oxide structure. Quantitative and qualitative evidence indicated that MF and dimethoxymethane (DMM) formation occur via distinct reaction intermediates. MF formation is linked to surface formate consumption, supported by the similarity between steady-state MF formation rate measured in a fixed-bed reactor and transient initial formate consumption rate determined by operando-FTIR. Apparent activation energies for HCOO* consumption (90 and 88 kJ mol-1) and MF formation (83 and 51 kJ mol-1) for 2.5 and 15 at. Mo nm- 2 samples, respectively, indicate that the formation pathway depends on the molybdenum oxide structure. Oligomeric, octahedral molybdenum oxide catalysts produce MF via adsorbed formate consumption, while crystalline MoO3 catalysts enable a parallel pathway, likely involving hemiacetal intermediates. This change in reaction pathway correlates with the structural transition from oligomeric to crystalline molybdenum oxide, as characterized by XRD, in situ Raman spectroscopy, FTIR of low-temperature CO adsorption, and XPS, among other techniques. The increase of surface formate consumption is related to the enhancement of the redox properties of the catalyst, attributed to interactions of molybdenum oxide with titania support and the presence of readily reducible Mo6+ sites that influence adsorbed formaldehyde reaction pathways. The observed activity and selectivity are explained by a three-active-site mechanism: molybdenum oxide redox sites for methanol dehydrogenation, molybdenum oxide acid sites for hemiacetal and DMM formation, and molybdenumtitania interfacial sites for HCOO* and MF formation., The authors thank the government of Chile for the financing assigned through the following projects: Millennium Science Initiative Program-NCN2021_090, CONICYT PIA/APOYO CCTE AFB170007, ANID-Chile. Gabriel Galdames acknowledges ANID (Chile) for the doctoral scholarship Beca de Doc.Nac./2020-21201192. Daviel Gomez acknowledges the MSCA postdoctoral fellowship from the Horizon Europe research and innovation program (Project 101154019-ADVCATALNANOMAT) . Patricia Concepcion acknowledges the Ministerio de Ciencia, Innovacion y Universidades, grant number PID2021-1262350BC31, and Generalitat Valenciana (GVA) , grant number CIAICO/2021/2138. This study forms a part of the Advanced Materials programme and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) (TED2021-130756B-C32) and by Generalitat Valenciana (ref MFA/2022/016) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

H2 production at positive potentials with a stable and bifunctional Ru0-RuO2Cy electrocatalyst

  • Gonell-Gómez, Francisco|||0000-0002-8658-2878
  • Tebar-Soler, Carmen|||0000-0001-7054-4503
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Diaz-Coello, Sergio
  • Pastor, Elena
[EN] Developing highly efficient and earth-abundant catalysts for the hydrogen evolution reaction (HER) is essential to produce hydrogen (H2) as a sustainable energy vector, providing an alternative to fossil fuels. Promoting HER in basic media remains challenging due to the lower proton availability compared to acidic conditions. Herein, we report the synthesis of partially carbon-coated, ruthenium-based materials with carefully controlled synthesis parameters that modulate the concentrations of metallic Ru0 and ruthenium oxycarbonate (RuO2Cy). These materials exhibit impressive electrocatalytic performance in HER, with overpotentials required to reach a current density of 10 mA cm- 2 (versus RHE) as low as 37 mV in acidic and 7 mV in basic media. The high efficiency observed in basic media was further characterized using differential electrochemical mass spectrometry (DEMS) and in situ Raman spectroscopy, revealing H2 production at positive potentials. This phenomenon may result from local pH changes facilitated by efficient water deprotonation on ruthenium species with intermediate oxidation states. In addition to high activity, the most efficient material demonstrated excellent stability, with no significant deactivation during chronopotentiometry experiments at 10 mA cm- 2 for 40 h. This work underscores the importance of precise material design in developing effective electrocatalysts for HER., The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. E. Pastor and S. Diaz-Coello acknowledge PID2020-117586RB-I00 funded by MCIN/AEI/10.13039/501100011033. F. Gonell thanks the Ramon y Cajal program (RYC2023-044631-I) funded by MCIN/AEI/10.13039/501100011033. C. Tebar-Soler acknowledges the Polytechnical University of Valencia for the economic support through the grant of an FPI scholarship associated with the PAID programme "Programa de Ayudas de Investigacion y Desarrollo". This research was funded by Ministerio de Ciencia, Innovacion y Universidades (MCIN) , grant number PID2021-1262350B-C31 and Generalitat Valenciana (GVA) , grant number CIAICO/2021/2138. This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) and Generalitat Valenciana (ref MFA/2022/016 and TED2021-130756B-C32) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interdependence Between the Extent of Ga Promotion, the Nature of Active Sites, and the Reaction Mechanism Over Cu Catalysts for CO2 Hydrogenation to Methanol

  • Gómez, D
  • Vergara, Tomás
  • Ortega, Maray
  • Diaconescu, Vlad Martin
  • Simonelli, Laura
  • Jiménez, Romel
  • Karelovic, Alejandro
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] The effect of low Ga contents on Cu/SiO2 catalysts was studied for the CO2 hydrogenation reaction. Catalysts were synthesized with different Ga2O3 contents by incipient wetness impregnation, resulting in similar average Cu nanoparticle sizes, between 6.0 and 6.6 nm. Characterization techniques such as IR-CO, quasi in situ XPS and in situ XAS, kinetic tests, in situ/operando diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and steady state isotopic transient kinetic analysis (SSITKA) were combined to disclose the promoting effect of Ga and its relationship with the nature of active sites and the reaction mechanism. It was found that a Cu+ site was formed at the Cu-Ga2O3 interface with the addition of a promoter, and it was demonstrated that this site allows the direct dissociation of CO2. The intrinsic rate of methanol formation on promoted catalysts increases by approximately 1 order of magnitude without significantly changing the intrinsic rate of CO formation. The same was observed for the apparent activation energies, which were constant for CO and decreasing for methanol, further depicting a change in the nature of active sites for the latter. On the unpromoted Cu catalyst, methanol is formed mainly on Cu0 through the formate pathway, while over Cu-Ga2O3 the main active site shifts to the Cu+ species generated at the interface, which moreover favored the reverse water-gas shift followed by the hydrogenation of carbonyl intermediates (RWGS + CO-Hydro). SSITKA experiments confirmed that Ga contributed positively to the formation and stabilization of additional active sites where methanol is formed; the amount of these sites increased with the loading of promoter. This was reflected as an increase in the measured number of intermediates that lead to methanol, while the coverage of intermediates that form CO remained constant, irrespective of Ga loading. It was further verified that the intrinsic reactivity ( TOF ITK) of the Cu+ site at the Cu-Ga2O3 interface is lower than that of the Cu monometallic catalyst, but this is balanced by the contribution of a greater number of these active sites. On the other hand, the CO formation rate was not modified. Therefore, it is concluded that Ga does not change the nature of the active sites involved in the CO formation. By combining state of the art characterization techniques, rational kinetic measurements, operando spectroscopy and isotopic labeling, this work clearly stablishes a relationship between Ga2O3 promotion, nature of active sites, and reaction mechanism over Cu catalyst., The authors thank the government of Chile for the financing assigned through the FONDECYT grant 1190178 from the National Agency for Research and Development (ANID). D.G. thanks ANID-Chile, Beca de Doc.Nac./2019-21190800 and the Project UCO 1866 of the Universidad de Concepcion. P.C. aknowledges the Ministerio de Ciencia, Innovacion y Universidades, grant number PID2021-1262350B-C31, and Generalitat Valenciana (GVA), grant number CIAICO/2021/2138. This study forms a part of the Advanced Materials programme and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) (TED2021-130756B-C32) and by Generalitad Valenciana (ref MFA/2022/016). These experiments were performed at BL22-CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff and the experimental team: Beatriz M. Moreno Torrealbo, Minjie Zhao, and Jose Soriano Rodriguez. T.V. acknowledges the financial support from the Research GrantsyDoctoral Programs in Germany (57645448), awarded by the Deutsche Akademische Austauschdienst (DAAD), Government of Germany. Saint-Gobain Norpro is acknowledged for kindly providing the SiO2 support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Building lactams by highly selective hydrodeoxygenation of cyclic imides using an alumina-supported AgRe bimetallic nanocatalyst

  • Lluna-Galán, Carles
  • Arango-Daza, Juan Camilo
  • Sun, Rong
  • Calvino, Jose Juan
  • Simonelli, Laura
  • Adam, Rosa
  • Gómez-Acosta, Daviel|||0000-0003-0010-4507
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Cabrero Antonino, Jose Ramón|||0000-0001-9628-9803
[EN] The rational design of robust nanocatalysts containing the suitable active sites for building relevant organic compounds, such as lactams, is a desired approximation towards the development of a sustainable fine chemistry field. In that sense, the design of a proper nanomaterial able to mediate the selective hydrodeoxygenation of cyclic imides to lactams with high tolerance to the preservation of aromatic rings remains rather unexplored. Here, we show the design of a bimetallic AgRe nanomaterial with notable activity and selectivity to mediate this transformation affording more than 60 lactams from the corresponding imides. Interestingly, in this work we disclose that the optimal AgRe nanocatalyst is constituted by AgReO4 nanoaggregates that undergo an in situ hydrogenative dispersion to form the active centers composed by Ag0 nanoparticles and ReOx species. Deep characterization, together with kinetic and mechanistic studies, have revealed that the intimate Ag-Re contact intrinsic to AgReO4 species is key for the formation of the most active catalytic sites and the proper bimetallic cooperation required for mediating the desired process., This work was supported by Generalitat Valenciana through SEJI (Subvencions Excelencia Juniors Investigadors, grants SEJI/2019/006 and SEJI/2020/013), PROMETEO/2021/077 and CIAICO/2021/2138 programs and a program from "La Caixa" Foundation (ID 100010434), fellowship code LCF/BQ/PI18/11630023. The work was also funded by Spanish Government via MICINN with RETOS I + D + I program (PID2019-109656RA-I0 / AEI / 10.13039/501100011033), grants CNS2023-144172, PID2020-113006-RB-I00, PID2021-1262350B-C31, TED2021-130191B-C44 and TED2021-130756B-C32 funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged. This study forms part of the Advanced Materials program supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) and Generalitat Valenciana (grant MFA/2022/016). R. A. and J. R. C.-A. thank to MICINN (Spanish Government) for two Ramon y Cajal contracts (ref. RYC2020-029493-I and RYC-2017-22717). XAS experiments were performed at BL22-CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff (proposal 2022075907). ELECMI-ICTS facilities (proposal ELC402023) are also acknowledged for electron microscopy experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancement of ethylene production by alkali metal doping of MoVSb mixed oxide catalyst for ethane oxidative dehydrogenation

  • Ivars Barceló, F.
  • Solsona, B.
  • Asedegbega-Nieto, E.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Hydrothermally prepared Mo-V-Sb mixed oxides doped with alkali metal cations (Li+, Na+, K+, Rb+, or Cs+) show a significantly improved catalytic behavior in the oxidative dehydrogenation of ethane (ODH) compared to conventional alkali metal-free MoVSbO catalysts. Initial selectivity to ethylene above 95 % was held up to 20 % of ethane conversion for all alkali metal promoted MoVSbO catalysts, as well as lower ethylene overoxidation at higher ethane conversion, with differences depending on the alkali metal employed. Thus, from Li to K, the enhanced catalytic performance follows a bottom-up trend as increasing the size of the cation. An intermediate behavior is observed though for the catalyst doped with Cs cations, with the highest atomic radius. The K-doped MoVSbO catalyst is the least prone to both ethane total oxidation and ethylene overoxidation, which enables up to 90 % selectivity to ethylene at ethane conversion higher than 65 %., This work was supported by the Ministerio de Ciencia e Innovacion of Spain (projects PID21-126235OB-C31 and PID21-126235OB-C33). F. Ivars-Barcelo also acknowledges the Ministerio de Ciencia e Innovacion of Spain by the support from the "Ramon y Cajal" excellence grant (Ref.: RYC2020-029470-I/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the selective transformation of ethanol over Mg- and/or La-containing mixed oxides catalysts

  • Ballesteros Plata, D.
  • Balestra, G.
  • Cecilia, J.A.
  • Barroso Martín, I.
  • Infantes-Molina, A.
  • Tabanelli, T.
  • Cavani, F.
  • Montaña, M.
  • Rodríguez Castellón, E.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] MgO-La2O3 catalysts with different Mg/La molar ratio were synthesized by a precipitation method and a subsequent calcination and then characterized by x-ray diffraction, N2 adsorption-desorption isotherms (at-196 degrees C), CO2- and NH3-thermoprogrammed desorption and x-ray photoelectronic spectroscopy. The coexistence of acid and basic sites promoted the selective transformation of ethanol into valuable products. Thus, MgO catalyst promoted the Guerbet reaction obtaining n-butanol as product while the incorporation of La2O3 in the catalytic system improved the ethanol conversion notably, obtaining ethylene as the main product due to a dehydration reaction. The highest ethylene yield was obtained for the catalyst with a Mg/La molar ratio of 1., The funding received for this study from the Spanish Ministry of Science and Innovation, PID2021-126235OB-C31 and PID2021-126235OB-C32 funded by MCIN/AEI/10.13039/501100011033 and FEDER funds, and projects TED2021-130756B-C31 and TED2021-130756B-C32 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR, is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spectroscopic insights into the role of CO2 on the nature of Cr species in a CrOX/Al2O3 catalysts during ethane dehydrogenation with CO2

  • Franceschini, Gustavo do N.
  • Schwaab, Marcio
  • Rangel, Maria do Carmo
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] The dehydrogenation of ethane with CO2 was studied on CrOx/Al2O3 catalysts (8 wt% of CrOx) in the 600-675 degrees C temperature range. The role of CO2 was determined by comparison with catalytic and spectroscopic data of ethane dehydrogenation without CO2. Characterization of fresh catalyst suggested an intimate interaction of Cr and support. Moreover, in situ Raman spectroscopic analysis combined with oS studies done on reaction exposed samples indicated changes in both the nature of active Cr species and the reaction mechanism depending on the reaction conditions (i.e., presence/absence of CO2, and the reaction temperature). At lower temperatures (600-625 degrees C), CO2 promotes the re-oxidation of Cr3+ to Cr6+ favoring the oxidative dehydrogenation (ODH) route. While at higher temperatures (650-675 degrees C), the reaction occurs mainly via a catalytic dehydrogenation mechanism, as CO2 is no longer capable of re-oxidizing Cr3+ to Cr6+, with CO2 inhibiting partially the formation of coke., The authors would like to acknowledge the Ministerio de Ciencia e Innovacion of Spain (projects PID2021-126235OB-C31, TED2021-130756B-C32 and the Generalitat Valenciana (project MFA/2022/016) for the financial support. The authors also acknowledge Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior - Brasil & nbsp;(CAPES/Print, UFRGS 2020) for the scholarship to G. do N. Franceschini.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of Cs-W-V-O hexagonal tungsten bronzes for the partial oxidation of ethanol to acetaldehyde

  • Gagliardi, Anna
  • De Arriba-Mateos, Agustín
  • Delgado-Muñoz, Daniel
  • Vallejo, Maria Jose
  • López-Sánchez, Jesús
  • Tabanelli, Tommaso
  • Rubio-Zazo, Juan
  • Cavani, Fabrizio
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] While bioethanol has been acknowledged as a relevant bioderived feedstock, acetaldehyde is an important commodity used to produce a variety of industrial chemicals, and its manufacture currently relies almost exclusively on fossil ethylene. This paper shows the effect of Cs-content in W-V-O hexagonal tungsten bronze catalysts on changes in both the physicochemical characteristics of catalysts and their catalytic performance in the aerobic transformation of ethanol to acetaldehyde, providing a promising pathway to broaden the domain of biorefinery products. The catalytic results were explained on the basis of the elimination of acid sites (responsible to the formation of ethylene and diethyl ether) by the incorporation of Cs+, as interstitial cations, in V-containing hexagonal tungsten bronzes. The catalysts were characterized by XRD, IR, XPS and FESEM, among others, and the incorporation of Cs+ into the bronze backbone, successfully demonstrated by HAXPES and confocal Raman techniques, led to 33% EtOH conversion and 97% acetaldehyde selectivity in the best catalyst¿s formulation,, The funding received for this study from the Spanish Ministry of Science and Innovation, PID2021-126235OB-C31, PID2021-122980OBC5 and PID2023-151036OA-I00 funded by MCIN/AEI/10.13039/501100011033 and FEDER funds, and projects TED2021-130756B-C32 and RYC2022-035912-I funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe by the European Union NextGenerationEU/PRTR, is acknowledged. Authors would also like to thank the European Synchrotron Radiation Facility (beamtime project A25-02-1068), MICIN and Consejo Superior de Investigaciones Científicas for the use of the synchrotron radiation facilities through project PIE 2010 6 0E 013 and to the BM25-SpLine staff for their valuable help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal Oxide Bronzes as Catalysts and Catalyst Precursors for Redox and/or Acid Catalysis

  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] In recent decades, the synthesis, characterization, and potential applications of metal oxide bronzes have been studied, with their potential applications as catalysts and electrocatalysts. Among these, materials based on mixed oxide bronzes, with specific crystalline structures, of molybdenum and/or tungsten have garnered some attention for their application in catalytic processes for the valorization of natural gas fractions (especially ethane and propane) and/or biomass derivatives (especially glycerol, but also other components). This paper presents a review of the types of synthesized materials and the catalytic processes in which molybdenum and/or tungsten oxides bronzes have been studied. In addition, it will be also presented P-containing catalysts as well as other pseudo-crystalline materials, which can be also of interest in these types of reaction., Financial support from the Spanish Ministry of Science and Innovation, project PID2021-126235OB-C31, funded by MCIN/ AEI/https://doi.org/10.13039/501100011033 and FEDER funds; and project TED2021-130756B-C32, funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of CO2 presence on propane conversion routes over Cr-and Ga-doped PtCe/Al2O3 catalysts

  • Ballesteros-Plata, D.
  • Barroso-Martín, I.
  • Cecilia, J.A.
  • Rodriguez-Castellon, E.
  • Infantes-Molina, A.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A set of catalysts containing Cr-or Ga-doped Pt-CeO2 supported on alumina (PCA, Cr-PCA and Ga-PCA) were synthesized by incipient wetness impregnation and tested in propane conversion processes. The catalysts were studied in the propane conversion process with or without CO2 in the feed. In all cases, an enhancement in stability was found when CO2 was present in the reaction medium despite the lower catalytic activity. As well, all catalysts presented a higher propylene selectivity in the absence of CO2, indicating that the direct dehydrogenation of propane is the main reaction route. Moreover, CO2-assisted propane cracking to ethylene is favoured over propane reforming or direct cracking, given the minimal selectivity to other products like methane. With regards to the catalyst composition, Cr-PCA catalyst was the most active catalyst both in the absence and presence of CO2, due to the presence of weak acidity and coexistence of Cr3+ and Cr6+ redox species, as evidenced by XPS analysis. Ga-PCA catalyst was more selective to propylene, indicating that higher acidity of weak-to-medium nature along with formation of low coordinated Ga3+ species is beneficial for the CO2-ODH process. Raman, DTG and XPS analyses after reaction with CO2 showed that the deactivation of the catalysts was mainly due to carbon deposits of amorphous and graphitic nature on the surface of the catalysts., The authors thank the funding received from the Spanish Ministry of Science and Innovation, PID2021-126235OB-C31 and PID2021-126235OB-C32 funded by MCIN/AEI/10.13039/501100011033 and FEDER funds, and projects TED2021-130756B-C31 and TED2021-130756B-C32 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGener-ationEU/PRTR. IBM thanks Universidad de Ma <acute accent> laga for a postdoctoral grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing stability of Cu/ZnO catalysts in the CO2 hydrogenation to methanol by the addition of MoO3 and ReO3 promoters

  • Soriano-Rodríguez, José
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Gómez-Acosta, Daviel|||0000-0003-0010-4507
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Rodriguez-Castellon, Enrique
  • Infantes, Antonia
[EN] The catalytic hydrogenation of CO2 to methanol represents a promising route for carbon recycling and hydrogen storage. However, the stability of current catalysts remains one of the main technological challenges. In this work, we investigate the promotional effect of MoO3 and ReO3 on Cu/ZnO-based catalysts with metal loadings ranging from 0.06 to 3.5 wt%. Spectroscopic (XPS and in situ Raman) and kinetic studies reveal that the incorporation of ultra-low promoter amounts (0.06 wt%) enhances methanol productivity, whereas higher concentrations lead to partial blocking of the active copper sites. Rhenium promotes the stabilization of Cu+ species, while molybdenum establishes strong Cu-Mo interactions that modify the reducibility and surface composition of the catalyst. Remarkably, longterm stability tests (80 h, 240 ¿C, 20 bar and CO2/H2 = 3) demonstrate that Mo-promoted catalysts exhibit superior durability, reducing the deactivation constants by up to 82% compared to the un-promoted Cu/ZnO sample. This enhanced stability is attributed to the higher Cu-MoO3 interaction, enhanced Cu dispersion and high water affinity of Mo species, which trap water as Mo-OH bonds, preventing copper sintering under reaction conditions. These findings highlight the dual role of Re and Mo in tuning both activity and stability, emphasizing the crucial influence of Mo on the long-term performance of Cu-based catalysts for CO2 to methanol conversion., This research was funded by Ministerio de Ciencia, Innovacion y Universidades, grants number PID2021-1262350B-C31 and PID2021-1262350B-C32 (funded by MCIN/AEI/10.13039/501100011033 and FEDER) and Generalitat Valenciana (GVA), grant number CIAICO/2021/2138. This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) and Generalitad Valenciana (ref MFA/2022/016). D.G. thanks the Marie-Curie Postdoctoral (MSCA) Fellowship ID 101154019.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ethane ODH with CO2 over alumina-supported Fe-Ni-O mixed oxides catalysts

  • Franceschini, Gustavo N.
  • Schwaab, Marcio
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] The dehydrogenation of ethane in the presence of CO2 on alumina supported Fe-Ni-O catalysts was studied. The Fe/Ni ratio in catalysts strongly influences both the conversion of ethane and CO2 and the nature of reaction products. Iron species, linked to the hematite phase (¿-Fe3O4), favors ethane ODH but also the RWGS and dry reforming reactions (as parallel reactions). Nickel oxide has a high catalytic activity due to its capacity to break both C-H and C=C bonds in a non-selective way, facilitating the generation of CO. Characterization results show changes in catalysts during the reaction. The H2-TPR patterns of catalysts suggest a low interaction between the support and the iron particles, and a parallelism between the reducibility of iron particles and the conversion of reactants. In addition, all catalysts suffer important restructuration under reaction conditions, with iron oxide segregates to the catalyst surface together with a partial reduction of Fe3+ to Fe2+ (as determined by XPS). These changes could be confirmed by XRD, Raman, XPS and UV¿vis spectroscopy analyses. Temperature programmed surface reactions (TPSR), under different experimental conditions, indicate an important role of nickel in the bimetallic catalysts, avoiding severe reduction of the catalyst and stabilizing different types of iron oxide species with different selectivity to products., The authors would like to acknowledge the Ministerio de Ciencia e Innovacion of Spain (projects PID2021-126235OB-C31, TED2021-130756B-C32) funded by the MICIU/AEI/10.13039/501100011033 and FEDER/UE. The authors also acknowledge Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior - Brasil (CAPES/Print, UFRGS 2020) for the scholarship to G. do N. Franceschini.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the selectivity to ethylene during ethane ODH over M1-based catalysts. A surface and electrochemical study

  • De Arriba-Mateos, Agustín
  • Sánchez, Ginebra
  • Sánchez-Tovar, Rita
  • Fernández-Domene, Ramón
  • Solsona, Benjamín
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] MoVO, MoVTeO and MoVTeNbO mixed oxides, prepared hydrothermally and heat-treated in N2 at 400, 500 or 600 degrees C, are active and selective catalysts in the oxidative dehydrogenation (ODH) of ethane, although their catalytic behaviour strongly depends on the composition and the activation temperature of the material. Thus, the selectivity to ethylene over samples heat-treated at 400 or 600 degrees C, decreases according to the following trend: MoVTeNb-600 > MoV-400 > MoVTe-600 > MoVTe-400 > MoVTeNb-400 >> MoV-600 (with catalysts heat -treated at 500 degrees C presenting an intermediate performance). This catalytic performance can be explained to a high extent by the presence of the M1 phase in the best catalysts. Interestingly, the temperature of formation and decomposition of the M1 phase strongly depends on the chemical composition of the catalysts, leading to different trends depending on the heat-treatment temperature. Not only the presence of the M1 phase determines the catalytic performance but also the V4+/V5+ ratio in the surface of catalysts. Additionally, a comprehensive brand-new electrochemical characterization of the catalysts has been carried out for MoV-based samples with M1 phase. Accordingly, the best catalytic behaviour in terms of selectivity to ethylene in the ethane ODH was observed in those materials presenting higher charge-transfer resistances at the interfacial active parts and n-type semiconductivity with few O-vacancies. Besides, lower current densities obtained in cyclic voltammetries (related to low electrochemical activity) has been associated with higher selectivity in the ODH reaction., The funding received from the Ministerio de Ciencia e Innovación of Spain, MINECO/FEDER (Projects: PID2021-126235OB-C31, PID2021-126235OB-C33, TED2021-130756B-C32 and TED2021-129555B-I00), for this study is acknowledged. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Low-temperature hydroformylation of ethylene by phosphorous stabilized Rh sites in a one-pot synthesized Rh-(O)-P-MFI zeolite

  • Zhao, M.
  • Li, C.
  • Gómez, D.
  • Gonell, F.
  • Diaconescu, V.M.
  • Simonelli, L.
  • López Haro, Miguel
  • Calvino Gámez, José Juan
  • Meira, D.M.
  • Concepción, P.
  • Corma, A.
Zeolites containing Rh single sites stabilized by phosphorous were prepared through a one-pot synthesis method and are shown to have superior activity and selectivity for ethylene hydroformylation at low temperature (50 °C). Catalytic activity is ascribed to confined Rh2O3 clusters in the zeolite which evolve under reaction conditions into single Rh3+ sites. These Rh3+ sites are effectively stabilized in a Rh-(O)-P structure by using tetraethylphosphonium hydroxide as a template, which generates in situ phosphate species after H2 activation. In contrast to Rh2O3, confined Rh0 clusters appear less active in propanal production and ultimately transform into Rh(I)(CO)2 under similar reaction conditions. As a result, we show that it is possible to reduce the temperature of ethylene hydroformylation with a solid catalyst down to 50 °C, with good activity and high selectivity, by controlling the electronic and morphological properties of Rh species and the reaction conditions., 13 páginas
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Predicting the catalytic performance of Nb-doped nickel oxide catalysts for the oxidative dehydrogenation of ethane by knowing their electrochemical properties

  • Abdelbaki, Yousra
  • Sánchez-Tovar, Rita
  • de Arriba, Agustín
  • García-González, Ester
  • Fernández-Domene, Ramón M.
  • Solsona, Benjamín
  • López Nieto, José Manuel
In the present article, a relationship between the catalytic performance in the oxidative dehydrogenation of ethane (ODHE) for Nb-doped NiO catalysts and their electrochemical properties has been proposed. To do so, highly stable and selective Nb-doped NiO catalysts for the ODHE to ethylene have been synthesized by optimizing synthesis parameters such as the amount of oxalic acid in the synthesis gel and the calcination temperature. These catalysts have been characterized by means of XRD, HRTEM, Raman and UV–vis diffuse reflectance spectroscopies, TPR and XPS. Moreover, Electrochemical Impedance Spectroscopy (EIS), capacitance measurements (Mott-Schottky analysis) and cyclic voltammetries studies were also carried out. Electrochemical characterization indicates changes in the type of semiconductivity: p-type for samples calcined at 350 °C and the sample prepared in the absence of oxalic acid and calcined at 500 °C, to n-type for samples prepared in the presence of oxalic acid in the synthesis gel and calcined at 500 °C. According to the obtained results, the most selective catalysts present a low Nb-incorporation on the NiO lattice with a large amount of tiny NbO nanoparticles covering NiO crystallites. This work presents, for the first time, a complete electrochemical characterization of Nb-doped NiO catalysts showing a correlation between electrochemical properties and catalytic performance., The authors would like to thank the the Ministerio de Ciencia e Innovación of Spain, MINECO/FEDER (Projects: TED2021-129555B-I00, PID2021-126235OB-C31, PID2021-126235OB-C33, TED2021-130756B-C32 and MFA/2022/016). Y.A. thanks the Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the selectivity to ethylene during ethane ODH over M1-based catalysts. A surface and electrochemical study

  • de Arriba, Agustín
  • Sánchez, Ginebra
  • Sánchez-Tovar, Rita
  • Concepción, Patricia
  • Fernández-Domene, Ramón
  • Solsona, Benjamín
  • López Nieto, José Manuel
MoVO, MoVTeO and MoVTeNbO mixed oxides, prepared hydrothermally and heat-treated in N at 400, 500 or 600 °C, are active and selective catalysts in the oxidative dehydrogenation (ODH) of ethane, although their catalytic behaviour strongly depends on the composition and the activation temperature of the material. Thus, the selectivity to ethylene over samples heat-treated at 400 or 600 °C, decreases according to the following trend: MoVTeNb-600 > MoV-400 > MoVTe-600 > MoVTe-400 > MoVTeNb-400 >> MoV-600 (with catalysts heat-treated at 500 °C presenting an intermediate performance). This catalytic performance can be explained to a high extent by the presence of the M1 phase in the best catalysts. Interestingly, the temperature of formation and decomposition of the M1 phase strongly depends on the chemical composition of the catalysts, leading to different trends depending on the heat-treatment temperature. Not only the presence of the M1 phase determines the catalytic performance but also the V/V ratio in the surface of catalysts. Additionally, a comprehensive brand-new electrochemical characterization of the catalysts has been carried out for MoV-based samples with M1 phase. Accordingly, the best catalytic behaviour in terms of selectivity to ethylene in the ethane ODH was observed in those materials presenting higher charge-transfer resistances at the interfacial active parts and n-type semiconductivity with few O-vacancies. Besides, lower current densities obtained in cyclic voltammetries (related to low electrochemical activity) has been associated with higher selectivity in the ODH reaction., The funding received from the Ministerio de Ciencia e Innovación of Spain, MINECO/FEDER (Projects: PID2021-126235OB-C31, PID2021-126235OB-C33, TED2021-130756B-C32 and TED2021-129555B-I00), for this study is acknowledged. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Copper(I) Oxo Species in Cu/ZnO Catalysts and Its Role in the Methanol Synthesis from CO2 Hydrogenation

  • Soriano, José
  • Fo, Y.
  • Gómez, Daviel
  • López Nieto, José Manuel
  • Roy, Abhijit
  • Manzorro, Ramón
  • Arenal, Raúl
  • Calvino, Jose J.
  • Song, Weiyu
This study reveals the presence of low-atomicity copper(I) oxo clusters strongly anchored to ZnO in commercial-type Cu/ZnO catalysts that, coexisting with metallic copper nanoparticles, play a critical role in CO2 hydrogenation. Their detection is challenging because metallic copper nanoparticles dominate the catalyst surface and these clusters appear in low amounts. Nevertheless, definitive evidence of their existence comes from the combination of in situ Raman spectroscopy, temperature-programmed CO surface reaction (TPSR-CO), time-resolved kinetic studies, and advance microscopy studies (STEM-XEDS and STEM-EELS). Catalytic studies combined with density functional theory (DFT) calculations demonstrate its critical role in methanol production and their size-dependent contribution to the total activity compared to traditional Cu-ZnO interfacial sites. According to DFT studies, CO2 adsorption is significantly more favorable on small Cu14O7 and Cu32O16 clusters than on extended Cu2O (111) (110) facets, metallic copper, or conventional metal-support interfacial sites. Moreover, the stabilization of carboxyl rather than formate-like intermediates follows a similar trend than the methanol production, being preferential on small Cu14O7 and Cu32O16 clusters, underlying a carboxyl-type intermediate path in methanol production., This research was funded by Ministerio de Ciencia, Innovación y Universidades, grant numbers PID2021-1262350B-C31, PID2020- 113006-RB-I00, and PID2023-151080NB-I00; CEX2023-001286- S funded by MCIN/AEI/10.13039/501100011033; and the Government of Aragon (DGA) through the project E13_23R and Generalitat Valenciana (GVA), grant number CIAICO/2021/2138. This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) and Generalitat Valenciana (TED2021-130756B-C32and ref MFA/2022/016). Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. D.G. thanks the Marie-Curie Postdoctoral (MSCA) Fellowship ID 101154019., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286- S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001230-S)., Peer reviewed