Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 56
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Barium ion sensing with IPG K+ molecular probes

  • Miller, R. L.
  • Byrnes, N.
  • Cameron, C. G.
  • Carlson, A. J.
  • Dey, E.
  • Madigan, R.
  • Medina, J.
  • Melancon, S.
  • Navarro, K. E.
  • Foss, F. W.
  • Jones, B. J. P.
  • Adams, C.
  • Almazan, H.
  • Aranburu, A. I.
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • García-Barrena, Jara
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
[EN] Fluorophores covalently bound to azacrown ether ionophores can be assembled into sensitive turn-on chemosensors. The size specificity and electron-rich nature of the ionophore's binding domain contribute to both selectivity and strong turn-on fluorescence sensing by various mechanisms when properly constructed. Aza-18-crown-6 ethers are quite selective for binding to K+ and Ba2+, yet the more electron-withdrawing dicationic nature of barium imposes a larger electronic effect on turn-on fluorescent sensors. Barium chemosensors can be important for measuring soluble Ba2+ in drinking water and have gained recent attention for their potential to enhance the detection of rare events in xenon decay. Here we quantify the capability of three chemosensors, marketed for biologically useful K+ sensing, as effective probes for Ba2+ ions. We present measurements from bulk spectrofluorometry to characterize the system in aqueous solutions and demonstrate the usefulness of these species for low-background single-ion fluorescence microscopy, revealing new candidates for Ba2+ sensing., Our program of single metal ion sensing is a part of a collaborative project to employ SMFI chemosensors functional at the solid-gas interface as R&D toward barium tagging for the NEXT experiment. We thank ION Biosciences for supplying the IPG dyes used in these experiments and also for technical support on their best use. We acknowledge support from the US National Science Foundation under award number NSF CHE 2004111 and the Robert A Welch Foundation under award number Y-2031-20200401 (University of Texas Arlington) and the US Department of Energy under awards DE-SC0019054 and DE-SC0019223. The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreement No. 951281-BOLD; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 957202-HIDDEN; the MCIN/AEI of Spain and ERDF A way of making Europe under grants RTI2018-095979 and PID2021-125475NB, the Severo Ochoa Program grant CEX2018-000867-S and the Ramon y Cajal program grant RYC-2015-18820; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087 and CIDEGENT/2019/049; the Department of Education of the Basque Government of Spain under the predoctoral training program non-doctoral research personnel; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Pazy Foundation (Israel) under grants 877040 and 877041; the US Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory) and DE-AC02-07CH11359 (Fermi National Accelerator Laboratory). Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Event Detection System in the NEXT-White Detector

  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Simón Estévez, Ander
  • Monrabal Capilla, Francesc
  • Rodriguez-Samaniego, Javier
  • Querol-Segura, Marc
[EN] This article describes the event detection system of the NEXT-White detector, a 5 kg high pressure xenon TPC with electroluminescent amplification, located in the Laboratorio Subterráneo de Canfranc (LSC), Spain. The detector is based on a plane of photomultipliers (PMTs) for energy measurements and a silicon photomultiplier (SiPM) tracking plane for offline topological event filtering. The event detection system, based on the SRS-ATCA data acquisition system developed in the framework of the CERN RD51 collaboration, has been designed to detect multiple events based on online PMT signal energy measurements and a coincidence-detection algorithm. Implemented on FPGA, the system has been successfully running and evolving during NEXT-White operation. The event detection system brings some relevant and new functionalities in the field. A distributed double event processor has been implemented to detect simultaneously two different types of events thus allowing simultaneous calibration and physics runs. This special feature provides constant monitoring of the detector conditions, being especially relevant to the lifetime and geometrical map computations which are needed to correct high-energy physics events. Other features, like primary scintillation event rejection, or a double buffer associated with the type of event being searched, help reduce the unnecessary data throughput thus minimizing dead time and improving trigger efficiency., The NEXT collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT, the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program SEV-2014-0398 and the Maria de Maetzu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FISNUC/2525/2014, under project UID/FIS/04559/2013 to fund the activities of LIBPhys, and under grants PD/BD/105921/2014, SFRH/BPD/109180/2015 and SFRH/BPD/76842/2011; the U.S. Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE-SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC2015-18820. We also warmly acknowledge the Laboratori Nazionali del Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Demonstration of neutrinoless double beta decay searches in gaseous xenon with NEXT

  • Novella, P.
  • Sorel, M.
  • Usón, A.
  • Adams, C.
  • Almazán, H.
  • Aparicio, B.
  • Aranburu, A. I.
  • Arazi, L.
  • Arnquist, I.J.
  • Auria-Luna, F
  • Ayet, S.
  • C.D.R. Azevedo
  • Bailey, K.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] The NEXT experiment aims at the sensitive search of the neutrinoless double beta decay in Xe-136, using high-pressure gas electroluminescent time projection chambers. The NEXT-White detector is the first radiopure demonstrator of this technology, operated in the Laboratorio Subterr & aacute;neo de Canfranc. Achieving an energy resolution of 1% FWHM at 2.6 MeV and further background rejection by means of the topology of the reconstructed tracks, NEXT-White has been exploited beyond its original goals in order to perform a neu-trinoless double beta decay search. The analysis considers the combination of 271.6 days of Xe-136-enriched data and 208.9 days of 136Xe-depleted data. A detailed background mod-eling and measurement has been developed, ensuring the time stability of the radiogenic and cosmogenic contributions across both data samples. Limits to the neutrinoless mode are obtained in two alternative analyses: a background-model-dependent approach and a novel direct background-subtraction technique, offering results with small dependence on the background model assumptions. With a fiducial mass of only 3.50 +/- 0.01 kg of Xe-136-enriched xenon, 90% C.L. lower limits to the neutrinoless double beta decay are found in the T-1/2(0 nu) > 5.5x10(23) -1.3x10(24) yr range, depending on the method. The presented techniques stand as a pro of-of-concept for the searches to be implemented with larger NEXT detectors., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreement No. 951281-BOLD; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 957202-HIDDEN; the MCIN/AEI of Spain and ERDF A way of making Europe under grants PID2021-125475NB and the Severo Ochoa Program grant CEX2018-000867-S; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087 and CIDEGENT/2019/049; the Department of Education of the Basque Government of Spain under the predoctoral training program non-doctoral research personnel; the Spanish la Caixa Foundation (ID 100010434) under fellowship code LCF/BQ/PI22/11910019; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Israel Science Foundation (ISF) under grant 1223/21; the Pazy Foundation (Israel) under grants 310/22, 315/19 and 465; the US Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M), DE-SC0019054 (Texas Arlington) and DE-SC0019223 (Texas Arlington); the US National Science Foundation under award number NSF CHE 2004111; the Robert A Welch Foundation under award number Y-2031-20200401. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring Lewis/Bronsted acid properties of MOF nodes via hydrothermal and solvothermal synthesis: simple approach with exceptional catalytic implications

  • Rojas-Buzo, Sergio
  • Bohigues, Benjamin
  • Lopes, Christian W.
  • Meira, Débora M.
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The Lewis/Bronsted catalytic properties of the Metal-Organic Framework (MOF) nodes can be tuned by simply controlling the solvent employed in the synthetic procedure. In this work, we demonstrate that Hf-MOF-808 can be prepared from a material with a higher amount of Bronsted acid sites, via modulated hydrothermal synthesis, to a material with a higher proportion of unsaturated Hf Lewis acid sites, via modulated solvothermal synthesis. The Lewis/Bronsted acid properties of the resultant metallic clusters have been studied by different characterization techniques, including XAS, FTIR and NMR spectroscopies, combined with a DFT study. The different nature of the Hf-MOF-808 materials allows their application as selective catalysts in different target reactions requiring Lewis, Bronsted or Lewis-Bronsted acid pairs., This work has been supported by the Spanish Government through the "Severo Ochoa" (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE). J. M. Salas is acknowledged for his contribution to CD<INF>3</INF>CN-FTIR experiments. C. W. L. thanks the PRH 50.1 - ANP/FINEP Human Resources Program for the Visiting Researcher Fellowship. This research used resources of the Advanced Photon Source, a user facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, and was supported by the U.S. DOE under Contract No. DE-AC02-06CH11357 and by the Canadian Light Source and its funding partners. The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rashba asymmetric topological insulator BiTeCl under compression: equation of state, vibrational features and electronic properties

  • Bandiello, Enrico|||0000-0003-0956-3195
  • Sans-Tresserras, Juan Ángel|||0000-0001-9047-3992
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Osman, H. H.
  • Rodríguez-Hernández, P.
  • Muñoz, Alfonso
  • González-Platas, J.
  • Popescu, C.
  • Greenberg, E.
  • Prakapenka, V.
  • Drasar, C.
  • Romero, A. H.
[EN] We present an in-depth characterization of the structural, vibrational, and electronic properties of the Rashba asymmetric topological insulator BiTeCl under high-pressure conditions (10 GPa) from an experimental and theoretical perspective. X-ray diffraction and Raman spectroscopy measurements reveal an incomplete and reversible phase transition to an allegedly less symmetric structure at a pressure above 5 GPa. The experimental equation of state and the axial compressibility of BiTeCl are reported and discussed, as well as a detailed analysis of the evolution of its vibrational features. The electronic band structure of BiTeCl is calculated and its behavior under compression is discussed, with emphasis on the behavior of the band gap and the increase of the Rashba splitting, which is found to be weakly anisotropic. An analysis of the electron density topology indicates that the low-pressure phase of BiTeCl is characterized by intralayer electron-deficient multicenter Bi-Te and Bi-Cl bonds and that interlayer bonds are not purely van der Waals in nature.; BiTeCl under high-pressure conditions is characterized. The equation of state, vibrational features, and electronic band structure are discussed, as well as the non-pure van der Waals character of the interlayer bonding of the low-pressure phase., This publication has been financed by the Spanish Research Agency (AEI) and Spanish Ministry of Science and Investigation (MCIN) under grants PID2021-125927NB-C21, PID2022-138076NB-C42/C44, and MALTA Consolider Team Network (RED2022-134388-T), co-financed by EU FEDER funds (DOI: 10.13039/501100011033). E. B. would like to thank the Generalitat Valenciana for the financial support from the ARCANGEL project (MFA/2022/025). We thank the Pittsburgh Supercomputer Center (Bridges2) and San Diego Supercomputer Center (Expanse) through allocation DMR140031 from the Advanced Cyberinfrastructure Coordination Ecosystem: Services & Support (ACCESS) program, which is supported by National Science Foundation grants No. 2138259, No. 2138286, No. 2138307, No. 2137603, and No. 2138296. We also recognize the support of West Virginia High Education Policy Commission under the call Research Challenge Grand Program 2022 and NASA EPSCoR Award 80NSSC22M0173. Portions of this work were performed at GeoSoilEnviroCARS (The University of Chicago, Sector 13), Advanced Photon Source (APS), Argonne National Laboratory. GeoSoilEnviroCARS was supported by the National Science Foundation - Earth Sciences (EAR - 1634415). This research used resources of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of threading libraries for high performance computing

  • Castelló, Adrián|||0000-0002-8576-8451
  • Quintana-Ortí, Enrique S.|||0000-0002-5454-165X
  • Mayo Gual, Rafael
  • Seo, Sangmin
  • Balaji, Pavan
  • Peña, Antonio J.
[EN] With the appearance of multi-/many core machines, applications and runtime systems have evolved in order to exploit the new on-node concurrency brought by new software paradigms. POSIX threads (Pthreads) was widely-adopted for that purpose and it remains as the most used threading solution in current hardware. Lightweight thread (LWT) libraries emerged as an alternative offering lighter mechanisms to tackle the massive concurrency of current hardware. In this article, we analyze in detail the most representative threading libraries including Pthread- and LWT-based solutions. In addition, to examine the suitability of LWTs for different use cases, we develop a set of microbenchmarks consisting of OpenMP patterns commonly found in current parallel codes, and we compare the results using threading libraries and OpenMP implementations. Moreover, we study the semantics offered by threading libraries in order to expose the similarities among different LWT application programming interfaces and their advantages over Pthreads. This article exposes that LWT libraries outperform solutions based on operating system threads when tasks and nested parallelism are required., The researchers from the Universitat Jaume I and Universitat Politecnica de Valencia were supported by project TIN2014-53495-R of the MINECO and FEDER, and the Generalitat Valenciana fellowship programme Vali+d 2015. Antonio J. Pena is financed by the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant No. 749516. This work was partially supported by the U.S. Department of Energy, Office of Science, Office of Advanced Scientific Computing Research (SC-21), under contract DE-AC02-06CH11357.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental and numerical study of lift-off length and ignition delay of a two-component diesel surrogate

  • Payri, Raul|||0000-0001-7428-5510
  • Viera Sotillo, Juan Pablo
  • Pei, Yuanjiang
  • Som, Sibendu
Understanding and controlling mixing and combustion processes is fundamental for the ever more demanding pollutant regulations and fuel consumption standards of direct injection diesel engines. The fundamentals of these processes have been long studied from both experimental and numerical perspectives. As numerical models become more advanced, the need for adequate experimental data increases. Hence, experimental methodologies and scientific databases need to be enhanced with more quantitative, accurate, consistent, and reliable information in order to evaluate the models in a robust fashion. The present study seeks to enhance the current state-of-the-art by further evaluating the combustion performance of a two-component diesel surrogate for multi-dimensional compression ignition engine simulations, composed of n-dodecane and m-xylene. This surrogate is expected to better represent diesel fuel combustion than the standard Engine Combustion Network (ECN) fuel (n-dodecane), since it contains an alkyl-benzene which represents an important chemical class present in diesel fuels. Experiments and numerical simulations have been performed on lift-off length and ignition delay in a wide range of conditions for a single-hole injector from ECN. The experiments were carried out in a constant-pressure flow facility able of reproducing engine-like thermodynamic conditions. The experiments focused in characterizing the ignition delay through the Schlieren technique, and the lift-off length through OH* chemiluminescence visualization, at ECN suggested test conditions. On the other hand, computational fluid dynamics (CFD) simulations were performed using a multi-flamelet representative interactive flamelet (mRIF) model by taking consideration of turbulence-chemistry-interaction (TCI) with a beta-function on the form of scalar probability density functions (PDFs). This model is evaluated extensively over a wider range of parametric variations in this study. Encouraging results were obtained compared to the experiments with regards to the predictions of ignition delay and lift-off length at different ambient temperatures, ambient densities and fuel-injection pressures. Under predictions were found at less reactive conditions, which leave room for improvement in the future. (C) 2014 Elsevier Ltd. All rights reserved., The research was funded by DOE's Office of Vehicle Technologies, Office of Energy Efficiency and Renewable Energy under Contract No. DE-AC02-06CH11357. The authors wish to thank Gurpreet Singh and Leo Breton, program managers at DOE, for his support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A complete and efficient CUDA-sharing solution for HPC clusters

  • Peña Monferrer, Antonio José
  • Reaño González, Carlos
  • Mayo Gual, Rafael
  • Quintana-Orti, Enrique S.
  • Duato Marín, José Francisco
  • Silla, Federico|||0000-0002-6435-1200
In this paper we detail the key features, architectural design, and implementation of rCUDA, an advanced framework to enable remote and transparent GPGPU acceleration in HPC clusters. rCUDA allows decoupling GPUs from nodes, forming pools of shared accelerators, which brings enhanced flexibility to cluster configurations. This opens the door to configurations with fewer accelerators than nodes, as well as permits a single node to exploit the whole set of GPUs installed in the cluster. In our proposal, CUDA applications can seamlessly interact with any GPU in the cluster, independently of its physical location. Thus, GPUs can be either distributed among compute nodes or concentrated in dedicated GPGPU servers, depending on the cluster administrator’s policy. This proposal leads to savings not only in space but also in energy, acquisition, and maintenance costs. The performance evaluation in this paper with a series of benchmarks and a production application clearly demonstrates the viability of this proposal. Concretely, experiments with the matrix–matrix product reveal excellent performance compared with regular executions on the local GPU; on a much more complex application, the GPU-accelerated LAMMPS, we attain up to 11x speedup employing 8 remote accelerators from a single node with respect to a 12-core CPU-only execution. GPGPU service interaction in compute nodes, remote acceleration in dedicated GPGPU servers, and data transfer performance of similar GPU virtualization frameworks are also evaluated. 2014 Elsevier B.V. All rights reserved., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO) and by FEDER funds under Grant TIN2012-38341-004-01. It was also supported by MINECO, FEDER funds, under Grant TIN2011-23283, and by the Fundacion Caixa-Castello Bancaixa, Grant P11B2013-21. This work was also supported in part by the U.S. Department of Energy, Office of Science, under contract DE-AC02-06CH11357. Authors are grateful for the generous support provided by Mellanox Technologies to the rCUDA Project. The authors would also like to thank Adrian Castello, member of The rCUDA Development Team, for his hard work on rCUDA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Determination of the Evolution of Heterogeneous Single Metal Atoms and Nanoclusters under Reaction Conditions: Which Are the Working Catalytic Sites?

  • Liu, Lichen
  • MEIRA, DEBORA M.
  • Arenal, Raul
  • Puga, Alberto V.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Identification of active sites in heterogeneous metal catalysts is critical for understanding the reaction mechanism at the molecular level and for designing more efficient catalysts. Because of their structural flexibility, subnanometric metal catalysts, including single atoms and clusters with a few atoms, can exhibit dynamic structural evolution when interacting with substrate molecules, making it difficult to determine the catalytically active sites. In this work, Pt catalysts containing selected types of Pt entities (from single atoms to clusters and nanoparticles) have been prepared, and their evolution has been followed, while they were reacting in a variety of heterogeneous catalytic reactions, including selective hydrogenation reactions, CO oxidation, dehydrogenation of propane, and photocatalytic H-2 evolution reaction. By in situ X-ray absorption spectroscopy, in situ IR spectroscopy, and high-resolution electron microscopy techniques, we will show that some characterization techniques carried out in an inadequate way can introduce confusion on the interpretation of coordination environment of highly dispersed Pt species. Finally, the combination of catalytic reactivity and in situ characterization techniques shows that, depending on the catalyst-reactant interaction and metal-support interaction, singly dispersed metal atoms can rapidly evolve into metal clusters or nanoparticles, being the working active sites for those abovementioned heterogeneous reactions., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683). L.L. thanks ITQ for providing a contract. The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, and was supported by the U.S. DOE under contract no. DE-AC02-06CH11357 and the Canadian Light Source and its funding partners. The HR STEM and STEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R.A. acknowledges support from Spanish MINECO grant MAT2016-79776-P (AEI/FEDER, UE), from the Government of Aragon and the European Social Fund (grant number E13_17R, FEDER, UE), and from the European Union H2020 program "ESTEEM3" (grant number 823717). A.V.P. thanks the Spanish Government (Agencia Estatal de Investigacion) and the European Union (European Regional Development Fund) for a grant for young researchers (CTQ2015-74138-JIN, AEI/FEDER/UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Measurements of droplet size in shear-driven atomization using ultra-small angle x-ray scattering

  • Kastengren, Alan
  • Ilavsky, J.
  • Viera-Sotillo, Juan Pablo
  • Duke, Daniel J.
  • Swantek, A.
  • Tilocco, F. Zak
  • Sovis, N.
  • Powell, Christopher F.
  • Payri, Raul|||0000-0001-7428-5510
[EN] Measurements of droplet size in optically-thick, non-evaporating, shear-driven sprays have been made using ultra-small angle x-ray scattering (USAXS). The sprays are produced by orifice-type nozzles coupled to diesel injectors, with measurements conducted from 1 - 24 mm from the orifice, spanning from the optically-dense near-nozzle region to more dilute regions where optical diagnostics are feasible. The influence of nozzle diameter, liquid injection pressure, and ambient density were examined. The USAXS measurements reveal few if any nanoscale droplets, in conflict with a popular computational model of diesel spray breakup. The average droplet diameter rapidly decreases with downstream distance from the nozzle until a plateau value is reached, after which only small changes are seen in droplet diameter. This plateau droplet size is consistent with the droplets being small enough to be stable with respect to further breakup. Liquid injection pressure and nozzle diameter have the biggest impact on droplet size, while ambient density has a smaller effect. (C) 2017 Published by Elsevier Ltd., X-ray spray research at Argonne is supported by the DOE Advanced Combustion Program. We acknowledge team leaders Gurpreet Singh and Leo Breton for their support. These experiments were performed at the 7-BM, 9-ID, and 15-ID beamlines of the Advanced Photon Source, Argonne National Laboratory. ChemMatCARS Sector 15 is principally supported by the Divisions of Chemistry (CHE) and Materials Research (DMR), National Science Foundation, under grant number NSF/CHE-1346572. Use of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, was supported by the U.S. DOE under Contract No. DE-ACO2-06CH11357. R. Payri was funded by a Fulbright visiting scholar grant in collaboration with the Ministry of Education, Culture and Sports of Spain (reference PRX14/00331) while performing this work. J.P. Viera was funded by the Spanish MINECO grant EEBB-I-15-0976 under project TRA2012-36932.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Demonstration of background rejection using deep convolutional neural networks in the NEXT experiment

  • Kekic, M.
  • Adams, C.
  • Woodruff, K.
  • Renner, J.
  • Church, E.
  • Del Tutto, M.
  • Hernando Morata, J. A.
  • Gomez-Cadenas, J. J.
  • Arazi, L.
  • Arnquist, I.J.
  • Azevedo, C. D. R.
  • Bailey, K.
  • Benlloch-Rodriguez, J. M.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] Convolutional neural networks (CNNs) are widely used state-of-the-art computer vision tools that are becoming increasingly popular in high-energy physics. In this paper, we attempt to understand the potential of CNNs for event classification in the NEXT experiment, which will search for neutrinoless double-beta decay in Xe-136. To do so, we demonstrate the usage of CNNs for the identification of electron-positron pair production events, which exhibit a topology similar to that of a neutrinoless double-beta decay event. These events were produced in the NEXT-White high-pressure xenon TPC using 2.6 MeV gamma rays from a Th-228 calibration source. We train a network on Monte Carlo-simulated events and show that, by applying on-the-fly data augmentation, the network can be made robust against differences between simulation and data. The use of CNNs offers significant improvement in signal efficiency and background rejection when compared to previous non-CNN-based analyses, This study used computing resources from Artemisa, co-funded by the European Union through the 2014-2020 FEDER Operative Programme of the Comunitat Valenciana, project DIFEDER/2018/048. This research used resources of the Argonne Leadership Computing Facility, which is a DOE Office of Science User Facility supported under Contract DE-AC02-06CH11357. The NEXT collaboration acknowledges support from the following agencies and institutions: Xunta de Galicia (Centro singularde investigacion de Galicia accreditation 2019-2022), by European Union ERDF, and by the "Maria de Maeztu" Units of Excellence program MDM-2016-0692 and the Spanish Research State Agency"; the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program grants SEV-20140398 and CEX2018-000867-S; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014 and under projects UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the U.S. Department of Energy under contracts number DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC-2015 18820. JMA acknowledges support from Fundacion Bancaria "la Caixa" (ID 100010434), grant code LCF/BQ/PI19/11690012. We also warmly acknowledge the Laboratori Nazionali del Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Data Compression in the NEXT-100 Data Acquisition System

  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
  • Rodríguez Ponce, Jorge
  • Simón Estévez, Ander
  • Benlloch Rodríguez, José María
[EN] NEXT collaboration detectors are based on energy measured by an array of photomultipliers (PMT) and topological event filtering based on an array of silicon photomultipliers (SiPMs). The readout of the PMT sensors for low-frequency noise effects and detector safety issues requires a grounded cathode connection that makes the readout AC-couple with variations in the signal baseline. Strict detector requirements of energy resolution better than 1% FWHM require a precise baseline reconstruction that is performed offline for data analysis and detector performance characterization. Baseline variations make it inefficient to apply traditional lossy data compression techniques, such as zero-suppression, that help to minimize data throughput and, therefore, the dead time of the system. However, for the readout of the SiPM sensors with less demanding requirements in terms of accuracy, a traditional zero-suppression is currently applied with a configuration that allows for a compression ratio of around 71%. The third stage in the NEXT detectors program, the NEXT-100 detector, is a 100 kg detector that instruments approximately five times more PMT sensors and twice the number of SiPM sensors than its predecessor, the NEXT-White detector, putting more pressure in the DAQ throughput, expected to be over 900 MB/s with the current configuration, which will worsen the dead time of the acquisition data system. This paper describes the data compression techniques applied to the sensor data in the NEXT-100 detector, which reduces data throughput and minimizes dead time while maintaining the event rate to the level of its predecessor, around 50 Hz., NEXT collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreement No. 951281-BOLD; the European Research Council (ERC) under Grant Agreement No. 101039048-GanESS; the European Union's Framework Program for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 957202-HIDDEN; the MCIN/AEI/10.13039/501100011033 of Spain and ERDF A way of making Europe under grant RTI2018-095979, the Severo Ochoa Program grant CEX2018-000867-S and the Maria de Maeztu Program grant MDM-2016-0692; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087 and CIDEGENT/2019/049; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Pazy Foundation (Israel) under grants 877040 and 877041; the US Department of Energy under contract number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M), DE-SC0019054 (Texas Arlington) and DE-SC0019223 (Texas Arlington); the US National Science Foundation under award number NSF CHE 2004111; the Robert A Welch Foundation under award number Y-2031-20200401. A.S.E acknowledges support from the Kreitman School of Advanced Graduate Studies at Ben-Gurion University and from the Marie Sklodowska-Curie grant agreement No. 101026628. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Breakup dynamics in a pressure-swirl injector for urea-water solution applications: A computational study

  • Marco-Gimeno, Javier|||0000-0002-4815-3714
  • Marti-Aldaravi, Pedro|||0000-0003-4650-4004
  • Asztalos, Katherine J.
  • Moon, Chi Young
  • Powell, Christopher F.
  • Nocivelli, Lorenzo
[ES] La cooptimización de la combustión dentro del cilindro y la tecnología de postratamiento se ha convertido en un aspecto clave en el diseño y desarrollo de motores, con el objetivo de cumplir con las normativas de emisiones cada vez más restrictivas en la industria del transporte. La Reducción Catalítica Selectiva es una tecnología robusta para controlar las emisiones de NOx, y la inyección de una solución de urea en agua en el tubo de escape es un aspecto fundamental de su operación. El trabajo propuesto utiliza Dinámica de Fluidos Computacional de alta fidelidad para caracterizar la dinámica de atomización del chorro líquido en condiciones relevantes de flujo cruzado. El estudio se centra en un inyector comercial de baja presión (9 bares) de tipo "pressure-swirl", cuya geometría interna ha sido caracterizada mediante tomografía computarizada de rayos X de alta resolución. El flujo bifásico interno se ha modelado utilizando el enfoque de volumen de fluido (VoF, por sus siglas en inglés) en un marco de simulación de LES (Large Eddy Simulation) y se ha validado frente a mediciones de radiografía de rayos X cercanas a la tobera. Además, se ha llevado a cabo la caracterización de la dinámica de rotura de la vena líquida para la formación de un cono hueco en espiral y se evaluó la influencia del flujo cruzado en dicha dinámica de rotura. Los resultados se han reportado proponiendo mapas Re-Oh y funciones de densidad de probabilidad para la cinemática del spray. Un mayor momento del flujo cruzado genera un aumento en la longitud intacta del chorro y una reducción en los diámetros de las gotas de líquido. El momento axial del chorro se ve afectado por el flujo cruzado ya en la región cercana a la tobera, lo que determina una desviación relevante en las velocidades del spray. Este trabajo tiene como objetivo la inicialización de modelos de spray Euleriano-Lagrangianos mediante la asignación de la cinemática de las gotas y el acoplamiento estático unidireccional entre los resultados del volumen de fluido y los paquetes de spray Lagrangianos, para ser utilizados en simulaciones de dominios del tamaño de la totalidad del sistema SCR., [EN] The co-optimization of in-cylinder combustion and after-treatment technology has become a major aspect in engine design and development, with the goal of meeting the increasingly restrictive emission regulations in the transportation industry. Selective Catalytic Reduction is a robust technology to control the emission of NOx, and the injection of urea in water solution is the exhaust tailpipe is a key aspect of its operation. The proposed work uses high-fidelity Computational Fluid Dynamics to characterize the atomization dynamics of the liquid jet in relevant cross-flow conditions. The study focuses on a commercial low-pressure (9 bar) pressure-swirl injector which is characterized in its internal geometry through high-resolution X-ray micro-computational tomography. The internal two-phase flow has been modeled according to the volume-of-fluid approach in a large eddy simulation framework and validated against near-nozzle X-ray radiography measurement. Moreover, characterizing the breakup dynamics for the swirling hollow cone formation, and assessing the influence of the cross-flow in the breakup dynamics was completed. The results have been reported proposing Re-Oh maps and probability density functions of the spray kinematics. Higher cross-flow momentum generates an increase in the jet intact length and a reduction of the liquid droplet diameters. The axial momentum of the jet is affected by the cross-flow already in the near-nozzle region, determining a relevant deviation of the spray velocities. This work aims to inform the initialization of Eulerian-Lagrangian spray models through the assignment of droplet kinematics and static one-way coupling between volume-of-fluid results and Lagrangian spray parcels, to be used for system-size domain simulations., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: We gratefully acknowledge Siddiq Khan and Gurpreet Singh at DOE s Office of Vehicle Technologies, Office of Energy Efficiency and Renewable Energy for funding this activity. We thank the computing resources provided on Bebop, a high-performance computing cluster operated by the Laboratory Computing Resource Center at Argonne, and Convergent Science Inc. for providing CONVERGE CFD software licenses and technical support. The experimental measurements presented in this work were obtained at the 7-BM beamline at the Advanced Photon Source (APS) at Argonne. Use of the APS is supported by DOE under Contract No. DE-AC02-06CH11357.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ion transport on phased radiofrequency carpets in xenon gas

  • Dey, E.
  • Jones, B. J. P.
  • Mei, Y.
  • Brodeur, M.
  • Chirayath, V. A.
  • Coward, N.
  • Foss, F. W.
  • Navarro, K. E.
  • Parmaksiz, I.
  • Adams, C.
  • Almazán, H.
  • Aparicio, B.
  • Aranburu, A. I.
  • Arazi, L.
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • García-Barrena, Jara
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] We present the design and performance of a four-phased radiofrequency (RF) carpet system for ion transport between 200–600 mbar, significantly higher than previously demonstrated RF carpet applications. The RF carpet, designed with a 160 μm pitch, is applied to the lateral collection of ions in xenon at pressures up to 600 mbar. We demonstrate transport efficiency of caesium ions across varying pressures, and compare with microscopic simulations made in the SIMION package. The novel use of an N-phased RF carpet can achieve ion levitation and controlled lateral motion in a denser environment than is typical for RF ion transport in gases. This feature makes such carpets strong candidates for ion transport to single ion sensors envisaged for future neutrinoless double-beta decay experiments in xenon gas., The work in this paper was funded by the US Department of Energy under DE-SC0019054 and DE-SC0019223 to the University of Texas at Arlington. The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreement No. 951281-BOLD; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 957202-HIDDEN; the MCIN/AEI of Spain and ERDF A way of making Europe under grants PID2021-125475NB and RTI2018-095979, and the Severo Ochoa and Maria de Maeztu Program grants CEX2023-001292-S, CEX2023-001318-M and CEX2018-000867-S; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087 and CISEJI/2023/27; the Department of Education of the Basque Government of Spain under the predoctoral training program non-doctoral research personnel; the Spanish la Caixa Foundation (ID 100010434) under fellowship code LCF/BQ/PI22/11910019; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Israel Science Foundation (ISF) under grant 1223/21; the Pazy Foundation (Israel) under grants 310/22, 315/19 and 465; the US Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M), DE-SC0019054 (Texas Arlington) and DE-SC0019223 (Texas Arlington); the US National Science Foundation under award number NSF CHE 2004111; the Robert A Welch Foundation under award number Y-2031-20200401; Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)-AY 155/2-1; MB acknowledge support from the National Science Foundation under grant number PHY-2310059. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Quasi-hydrostatic X-ray powder diffraction study of the low- and high-pressure phases of CaWO4 up to 28 GPa

  • Vilaplana Cerda, Rosario Isabel|||0000-0003-0504-2157
  • Lacomba-Perales, Raúl
  • Gomis, O.
  • Errandonea, Daniel
  • Meng, Y.
We have studied CaWO4 under compression using Ne as pressure-transmitting medium at room temperature by means of synchrotron X-ray powder diffraction. We have found that CaWO4 beyond 8.8 GPa transforms from its low-pressure tetragonal structure (scheelite) into a monoclinic structure (fergusonite). The high-pressure phase remains stable up to 28 GPa and the low-pressure phase is totally recovered after full decompression. The pressure dependence of the unit-cell parameters, as well as the pressure volume equation of state, has been determined for both phases. Compared with previous studies, we found in our quasi-hydrostatic experiments a different behavior for the unit-cell parameters of the fergusonite phase and a different transition pressure. These facts suggest that deviatoric stresses influence on the high-pressure structural behavior of CaWO4 as previously found in related compounds. The reported experiments also provide information on the pressure dependence of interatomic bond distances, shedding light on the transition mechanisms. (C) 2014 Elsevier Masson SAS. All rights reserved., Research sponsored by Spanish MINECO (MAT2010-21270-C04-01/04 and CSD2007-00045). Portions of this work were performed at HPCAT (Sector 16), Advanced Photon Source (APS), Argonne National Laboratory. HPCAT operations are supported by DOE-NNSA under Award No. DE-NA0001974 and DOE-BES under Award No. DE-FG02-99ER45775, with partial instrumentation funding by NSF. APS is supported by DOE-BES, under Contract No. DE-AC02-06CH11357.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

First results of the NEXT-100 detector using 83mKr decays

  • Martinez-Lema, G.
  • Herves Carrete, C.
  • Torelli, S.
  • Cid Laso, M.
  • Vazquez Cabaleiro, P.
  • Palmeiro, B.
  • Hernando Morata, J. A.
  • Gomez-Cadenas, J. J.
  • Adams, C.
  • Almazan, H.
  • Aranburu, A. I.
  • Arazi, L.
  • Arnquist, I. J.
  • Auria-Luna, F.
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • García-Barrena, Jara
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • MARTÍNEZ PÉREZ, ALBERTO
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] The NEXT Collaboration is investigating the double beta decay of ¹³¿Xe using high-pressure gaseous electroluminescent time projection chambers, which provide excellent energy resolution together with a robust topological signature. Operating at the Laboratorio Subterráneo de Canfranc (LSC) and building on the success of the NEXT-White detector, the NEXT-100 apparatus began commissioning in May 2024 and started operation with xenon at a pressure of 4 bar in October 2024. We report here the first results obtained with NEXT-100 using low-energy calibration data from ¿³¿Kr decays, which allow the detector response to be mapped throughout the active volume and its stability to be monitored over time. After homogenizing the light response, we achieve an energy resolution of 4.37% FWHM at 41.5 keV for ¿³¿Kr point-like energy deposits contained within a radius of 425 mm. In a fiducial region representing the operating conditions of NEXT-100 at 10 bar, we obtain an improved energy resolution of 4.16% FWHM. These results are in good agreement with those obtained in NEXT-White, and an E¿¹¿² extrapolation to Q<sub>ßß</sub> yields an energy resolution close to 0.5% FWHM, well below the 1% FWHM design target., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreements No. 951281-BOLD and 101039048-GanESS; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 860881-HIDDeN; the MCIN/AEI of Spain and ERDF A way of making Europe under grants PID2021-125475NB and RTI2018-095979, and the Severo Ochoa and Maria de Maeztu Program grants CEX2023-001292-S, CEX2023-001318-M and CEX2018-000867-S; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087, ASFAE/2022/028, ASFAE/2022/029, CISEJI/2023/27 and CIDEXG/2023/16; the Department of Education of the Basque Government of Spain under the predoctoral training program non-doctoral research personnel; the Spanish la Caixa Foundation (ID 100010434) under fellowship code LCF/BQ/PI22/11910019; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Israel Science Foundation (ISF) under grant 1223/21; the Pazy Foundation (Israel) under grants 310/22, 315/19 and 465; the US Department of Energy under contract numbers DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M), DE-SC0019054 (Texas Arlington) and DE-SC0019223 (Texas Arlington); the US National Science Foundation under award number NSF CHE 2004111; the Robert A. Welch Foundation under award number Y-2031-20200401. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Understanding the acoustic oscillations observed in the injection rate of a common-rail direct injection diesel injector

  • Manin, Julien
  • Kastengren, Alan
  • Payri, Raul|||0000-0001-7428-5510
Measuring the rate of injection of a common-rail injector is one of the first steps for diesel engine development. The injected quantity as a function of time is of prime interest for engine research and modeling activities, as it drives spray development and mixing, which, in current diesel engines, control combustion. On the other hand, the widely used long-tube method provides results that are neither straightforward nor fully understood. This study, performed on a 0.09-mm axially drilled single-hole nozzle, is part of the Engine Combustion Network (ECN) and aims at analyzing the acoustic oscillations observed in the rate of injection signal and measuring their impact on the real injection process and on the results recorded by the experimental devices. Several tests have been carried out for this study, including rate of injection and momentum, X-ray phase-contrast of the injector, and needle motion or injector displacement. The acoustic analysis revealed that these fluctuations found their origin in the sac of the injector and that they were the results of an interaction between the fluid in the chamber (generally gases) or in the nozzle sac and the liquid fuel to be injected. It has been observed that the relatively high oscillations recorded by the long-tube method were mainly caused by a displacement of the injector itself while injecting. In addition, the results showed that these acoustic features are also present in the spray, which means that the oscillations make it out of the injector, and that this temporal variation must be reflected in the actual rate of injection, The authors want to thank both Christopher Powell from Argonne National Laboratory and Jose Enrique del Rey from CMT-Motores Termicos for their support during the experiments. The X-ray measurements in this work were performed at the 7-BM and 32-ID beamlines of the Advanced Photon Source, Argonne National Laboratory. The work performed at Argonne and the use of the APS are supported by the U.S. Department of Energy under Contract No. DE-AC02-06CH11357 and by the Department of Energy Vehicle Technologies Program. The authors acknowledge the support of this work from the Department of Energy Vehicle Technologies Program, with Gurpreet Singh as a Team Leader.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Linking instantaneous rate of injection to X-ray needle lift measurements for a direct-acting piezoelectric injector

  • Viera-Sotillo, Juan Pablo
  • Swantek, Andrew B.
  • Duke, Daniel J.
  • Sovis, Nicolas
  • Kastengren, Alan L.
  • Powell, Christopher F.
  • Payri, Raul|||0000-0001-7428-5510
Internal combustion engines have been and still are key players in today's world. Ever increasing fuel consumption standards and the ongoing concerns about exhaust emissions have pushed the industry to research new concepts and develop new technologies that address these challenges. To this end, the diesel direct injection system has recently seen the introduction of direct-acting piezoelectric injectors, which provide engineers with direct control over the needle lift, and thus instantaneous rate of injection (ROI). Even though this type of injector has been studied previously, no direct link between the instantaneous needle lift and the resulting rate of injection has been quantified. This study presents an experimental analysis of the relationship between instantaneous partial needle lifts and the corresponding ROI. A prototype direct-acting injector was utilized to produce steady injections of different magnitude by partially lifting the needle. The ROI measurements were carried out at CMT-Motores Termicos utilizing a standard injection rate discharge curve indicator based on the Bosch method (anechoic tube). The needle lift measurements were performed at the Advanced Photon Source at Argonne National Laboratory. The analysis seeks both to contribute to the current understanding of the influence that partial needle lifts have over the instantaneous ROI and to provide experimental data with parametric variations useful for numerical model validations. Results show a strong relationship between the steady partial needle lift and the ROI. The effect is non-linear, and also strongly dependent on the injection pressure. The steady lift value at which the needle ceases to influence the ROI increases with the injection pressure. Finally, a transient analysis is presented, showing that the needle velocity may considerably affect the instantaneous ROI, because of the volume displaced inside the nozzle. Results presented in this study show that at constant injection pressure and energizing time, this injector has the potential to control many aspects of the ROI and thus, the heat release rate. Also, data presented are useful for numerical model validations, which would provide detailed insight into the physical processes that drive these observations, and potentially, to the effects of these features on combustion performance., The submitted manuscript has been created by UChicago Argonne, LLC, Operator of Argonne National Laboratory (Argonne). Argonne, a U.S. Department of Energy Office of Science laboratory, is operated under Contract No. DE-AC02-06CH11357. The U.S. Government retains for itself, and others acting on its behalf, a paid-up nonexclusive, irrevocable worldwide license in said article to reproduce, prepare derivative works, distribute copies to the public, and perform publicly and display publicly, by or on behalf of the Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stabilization of the Active Ruthenium Oxycarbonate Phase for Low-Temperature CO2 Methanation

  • Tebar-Soler, Carmen|||0000-0001-7054-4503
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Diaconescu, Vlad Martin
  • Simonelli, Laura
  • Missyul, Alexander
  • Perez-Dieste, Virginia
  • Villar-Garcia, Ignacio
  • Gómez, Daviel
  • Brubach, Jean-Blaise
  • Roy, Pascale
[EN] Interstitial carbon-doped RuO2 catalyst with the newly reported ruthenium oxycarbonate phase is a key component for low-temperature CO2 methanation. However, a crucial factor is the stability of interstitial carbon atoms, which can cause catalyst deactivation when removed during the reaction. In this work, the stabilization mechanism of the ruthenium oxycarbonate active phase under reaction conditions is studied by combining advanced operando spectroscopic tools with catalytic studies. Three sequential processes: carbon diffusion, metal oxide reduction, and decomposition of the oxycarbonate phase and their influence by the reaction conditions, are discussed. We present how the reaction variables and catalyst composition can promote carbon diffusion, stabilizing the oxycarbonate catalytically active phase under steady-state reaction conditions and maintaining catalyst activity and stability over long operation times. In addition, insights into the reaction mechanism and a detailed analysis of the catalyst composition that identifies an adequate balance between the two phases, i.e., ruthenium oxycarbonate and ruthenium metal, are provided to ensure an optimum catalytic behavior., This research was funded by Ministerio de Ciencia, Innovacion y Universidades, grant number PID2021-1262350B-C31, and Generalitat Valenciana (GVA), grant number CIAICO/2021/2138. This study formed part of the Advanced Materials programme and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) and Generalitad Valenciana (ref MFA/2022/016 and TED2021-130756B-C32). C.T.S acknowledges the Polytechnical University of Valencia for the economic support through the grant of an FPI scholarship associated with the PAID programme "Programa de Ayudas de Investigacion y Desarrollo." XAS, XPS, and XRD experiments were performed at the ALBA Synchrotron with the collaboration of ALBA staff. IR experiments were performed at the SOLEIL Synchrotron with the collaboration of the SOLEIL staff. This research used resources of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science user facility operated for the DOE Office of Science by the Argonne National Laboratory under Contract No.DE-AC02-06CH11357.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure and reactive properties of Nb-impregnated two-dimensional pillared MWW zeolites for total oxidation of volatile organic compounds

  • Balzer, Rosana
  • Wittee Lopes, Christian
  • Motta Meira, Debora
  • Pergher, Sibele B.
  • Bernardo-Gusmao, Katia
  • Díaz, Urbano|||0000-0003-1472-8724
  • Schwanke, Anderson Joel
[EN] In this work, the structure and reactive properties of niobium (Nb)-impregnated MWW-type materials were evaluated for gas-phase total oxidation of volatile organic compounds, including BTX (benzene, toluene and o -xylene). The role of the type of structure (two or three-dimensional) and the loading of Nb were considered. The results indicated most Nb species with a tetrahedral coordination on the external surfaces of both two- and threedimensional zeolites, together with a minimal contribution of octahedral extra-framework Nb2O5 species. The texture and Nb content played a key role in the gas-phase total oxidation of BTX. With the same Nb content (5 wt %), the pillared zeolite exhibited a higher specific surface, larger pore volume and mesopores between the MWW nanosheets when compared to the MCM-22 zeolites, which resulted in high accessibility of the reactant molecules to the active sites, reflected in higher BTX conversion at lower and higher temperatures (50-300 degrees C). The best performance was achieved with the pillared zeolite (10 wt% Nb), reaching a BTX conversion at 300 degrees C of 92%, 69% and 58%, respectively. The catalyst was stable for up to 30 h of reaction., A.J.S. thanks the Cordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES, Brazil; Finance Code 001) and the Programa de Pos-Graduacao em Quimica of the Universidade Federal do Rio Grande do Sul (PPGQ-UFRGS) . C.W.L. thanks the PRH 50.1 - ANP/FINEP Human Resources Program for the Visiting Researcher Fellowship. This research used resources of the Advanced Photon Source, a user facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, and was supported by the U.S. DOE under Contract No. DE-AC02-06CH11357 and by the Canadian Light Source and its funding partners. U.D thanks the MAT2017-82288-C2-1-P Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring the interoperability of remote GPGPU virtualization using rCUDA and directive-based programming models

  • Castelló, Adrián|||0000-0002-8576-8451
  • Quintana-Ortí, Enrique S.|||0000-0002-5454-165X
  • Peña Monferrer, Antonio José
  • Mayo Gual, Rafael
  • Planas,Judit
  • Balaji, Pavan
[EN] Directive-based programming models, such as OpenMP, OpenACC, and OmpSs, enable users to accelerate applications by using coprocessors with little effort. These devices offer significant computing power, but their use can introduce two problems: an increase in the total cost of ownership and their underutilization because not all codes match their architecture. Remote accelerator virtualization frameworks address those problems. In particular, rCUDA provides transparent access to any graphic processor unit installed in a cluster, reducing the number of accelerators and increasing their utilization ratio. Joining these two technologies, directive-based programming models and rCUDA, is thus highly appealing. In this work, we study the integration of OmpSs and OpenACC with rCUDA, describing and analyzing several applications over three different hardware configurations that include two InfiniBand interconnections and three NVIDIA accelerators. Our evaluation reveals favorable performance results, showing low overhead and similar scaling factors when using remote accelerators instead of local devices., The researchers from the Universitat Jaume I de Castello were supported by Universitat Jaume I research project (P11B2013-21), project TIN2014-53495-R, a Generalitat Valenciana grant and FEDER. The researcher from the Barcelona Supercomputing Center (BSC-CNS) Lausanne was supported by the European Commission (HiPEAC-3 Network of Excellence, FP7-ICT 287759), Intel-BSC Exascale Lab collaboration, IBM/BSC Exascale Initiative collaboration agreement, Computacion de Altas Prestaciones VI (TIN2012-34557) and the Generalitat de Catalunya (2014-SGR-1051). This work was partially supported by the U.S. Dept. of Energy, Office of Science, Office of Advanced Scientific Computing Research (SC-21), under contract DE-AC02-06CH11357. The initial version of rCUDA was jointly developed by Universitat Politecnica de Valencia (UPV) and Universitat Jaume I de Castellon (UJI) until year 2010. This initial development was later split into two branches. Part of the UPV version was used in this paper. The development of the UPV branch was supported by Generalitat Valenciana under Grants PROMETEO 2008/060 and Prometeo II 2013/009. We gratefully acknowledge the computing resources provided and operated by the Joint Laboratory for System Evaluation (JLSE) at Argonne National Laboratory.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reversible Transformation of Pt Nanoparticles into Single Atoms inside High-Silica Chabazite Zeolite

  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Serna Merino, Pedro Manuel
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Gabay, Jadeene E.
  • Kliewer, Chris E.
  • Carr, Robert T.
  • Guzman, Javier
  • Casty, Gary L.
[EN] We report the encapsulation of platinum species in highly siliceous chabazite (CHA) crystallized in the presence of N,N,N-trimethyl-1-adamantammonium and a thiol-stabilized Pt complex. When compared to Pt/SiO2 or Pt-containing Al-rich zeolites, the materials in this work show enhanced stability toward metal sintering in a variety of industrial conditions, including H-2, O-2, and H2O. Remarkably, temperatures in the range 650-750 degrees C can be reached without significant sintering of the noble metal. Detailed structural determinations by X-ray absorption spectroscopy and aberration-corrected high-angle annular dark-field scanning transmission electron microscopy demonstrate subtle control of the supported metal structures from similar to 1 nm nanoparticles to site-isolated single Pt atoms via reversible interconversion of one species into another in reducing and oxidizing atmospheres. The combined used of microscopy and spectroscopy is critical to understand these surface-mediated transformations. When tested in hydrogenation reactions, Pt/CHA converts ethylene (similar to 80%) but not propylene under identical conditions, in contrast to Pt/SiO2, which converts both at similar rates. These differences are attributed to the negligible diffusivity of propylene through the small-pore zeolite and provide final evidence of the metal encapsulation., This work has been supported by the European Union through the SYNCATMATCH project (Grant Agreement No. 671093) and the Spanish Government through "Severo Ochoa Program" (SEV 2012-0267) and MAT2015-71261-R. This research used beamline 9-BM of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. We thank Isabel Millet and Paul Stevens for technical assistance, and Randall Meyer, Aaron Sattler, and Dave Marler for review of the manuscript. We appreciate the support of ExxonMobil Research and Engineering for our efforts in fundamental catalytic research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A methodology to develop multi-physics dynamic fuel cell system models validated with vehicle realistic drive cycle data

  • López-Juárez, Marcos|||0000-0001-9886-4728
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Rockstroh, T.
  • Vijayagopal, R.
[EN] Fuel cell (FC) technology has been identified as a technically attractive solution to decarbonize the transportation sector, especially for heavy-duty vehicles. In this context, the industry and the scientific community are in need of advanced fuel cell systems (FCS) models that are able to replicate real-world operating conditions. Due to the scarcity of said models in the open literature, this study aimed to develop a comprehensive methodology to calibrate and validate multi-physics dynamic FCS models. Therefore, the key contribution of this paper is the detailed description of the calibration process for each component and the calibration order. The specific focus here was to accurately describe the behavior of the FC stack as well as the cathode, anode, and cooling circuits of the balance of plant. The model was calibrated with the aid of experimental data from a Toyota Mirai FC electric vehicle, which was predominantly retrieved from the vehicle¿s Controller Area Network (CAN) bus system thereby negating the need for major intrusion into the powertrain system. The validation process was deemed successful with the model being able to truthfully replicate the characteristics of the FC vehicle operated on the World-wide harmonized Light duty Test Cycle (WLTC) 3b and US06 driving cycle. The time-resolved physical parameters such as the cathode pressure, mass flow, or the FC stack temperature were captured with high fidelity, while the overall performance parameters such as the H2 consumption in the stack and the system, and the compressor energy consumption were predicted accurately with a deviation lower than 0.47%, 1.75% and 1.89% with respect to the experimental data, respectively., This research is part of the project TED2021-131463B-I00 (DI-VERGENT) funded by MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR. It has also been partially funded by the Spanish Ministry of Science, Innovation, and University through the University Faculty Training (FPU) program (FPU19/00550) . Toby Rockstroh and Ram Vijayagopal acknowledge support through the US DOE Vehicle Technologies Program. Argonne National Laboratory is operated by UChicago Argonne, LLC under Contract no. DE-AC02-06CH11357. The US Government retains for itself, and others acting on its behalf, a paid-up non-exclusive, irrevocable worldwide license in said article to reproduce, prepare derivative works, distribute copies to the public, and perform publicly, by or on behalf of the Government. The authors would like to express their gratitude to Kevin Stutenberg from Argonne National Laboratory for the informative discussions surrounding the experimental test campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of combustion acoustic phenomena in compression-ignition engines using large eddy simulation

  • Broatch, A.|||0000-0001-9991-1039
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Pal, P.
[EN] As computational capabilities continue to grow, exploring the limits of computational fluid dynamics to capture complex and elusive phenomena, which are otherwise difficult to study by experimental techniques, is one of the main targets for the research community. This paper presents a detailed analysis of the physical processes that lead to combustion noise emissions in internal combustion engines. In particular, diesel combustion in a compression-ignition (CI) engine is studied in order to understand the singular behavior of the in-cylinder flow field responsible for the acoustic emissions. The main objective is, therefore, to improve the understanding of the phenomena involved in CI engine noise using large eddy simulations. Several visualization methods are employed to investigate the connection between combustion behavior and its effects on the pressure field. In addition, proper orthogonal decomposition is used to analyze the modal energy distribution among all the acoustic modes. The results show that the acoustic signature is fundamentally conditioned by the intensity of the premixed combustion rather than by the pressure oscillations generated by turbulent fluctuations in the flame surface established during the diffusion stage., The submitted manuscript was created partly by UChicago Argonne, LLC, Operator of Argonne National Laboratory. Argonne, a U.S. Department of Energy Office of Science laboratory, is operated under Contract No. DE-AC02-06CH11357. This research was partly funded by the U.S. DOE Office of Vehicle Technologies, Office of Energy Efficiency and Renewable Energy, under Contract No. DE-AC02-06CH11357. The authors wish to thank Gurpreet Singh and Michael Weismiller, program managers at the DOE, for their support. In addition, the authors would like to acknowledge the Laboratory Computing Resource Center (LCRC) at the Argonne National Laboratory for computing time on the Bebop cluster that was used in this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Next White (NEW) detector

  • Monrabal, F.
  • Gomez-Cadenas, J. J.
  • Laing, A.
  • Benlloch-Rodriguez, J. M.
  • Carcel, S.
  • Carrion, J
  • Felkai, R.
  • Martinez, A.
  • Musti, M.
  • Ouero, M.
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
[EN] Conceived to host 5 kg of xenón at a pressure of 15 bar in the ¿ducial volume,the NEXTWhite (NEW)apparatus is currently the largest high pressure xenon gas TPC using electroluminescent ampli¿cation in the world. It is also a 1:2 scale model of the NEXT-100 detector scheduled to start searching for ßß0¿ decays in 136Xe in 2019. Both detectors measure the energy of the event using a plane of photomultipliers located behind a transparent cathode. They can also reconstruct the trajectories of charged tracks in the dense gas of the TPC with the help of a plane of silicon photomultipliers located behind the anode. A sophisticated gas system, common to both detectors, allows the high gas purity needed to guarantee a long electron lifetime. NEXT-White has been operating since October 2017 at the Canfranc Underground Laboratory (LSC), in Spain. This paper describes the detector and associated infrastructures., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Marie Sklodowska-Curie Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad of Spain under grants FIS2014-53371-C04, the Severo Ochoa Program SEV-2014-0398 and the Maria de Maetzu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT and FEDER through the program COMPETE, projects PTDC/FIS-NUC/2525/2014 and UID/FIS/04559/2013; the U.S. Department of Energy under contract numbers DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M), DE-SC0017721 (University of Texas at Arlington), and DE-AC02-06CH11357 (Argonne National Laboratory); and the University of Texas at Arlington. We also warmly acknowledge the Laboratorio Nazionale di Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electroluminescence TPCs at the thermal diffusion limit

  • Henriques, C. A. O.
  • Monteiro, C. M. B.
  • Gonzalez-Diaz, D.
  • Azevedo, C. D. R.
  • Freitas, E. D. C.
  • Mano, R. D. P.
  • Jorge, M. R.
  • Fernandes, A. F. M.
  • Gomez-Cadenas, J. J.
  • Fernandes, L. M. P.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] The NEXT experiment aims at searching for the hypothetical neutrinoless double-beta decay from the 136Xe isotope using a high-purity xenon TPC. Efficient discrimination of the events through pattern recognition of the topology of primary ionisation tracks is a major requirement for the experiment. However, it is limited by the diffusion of electrons. It is known that the addition of a small fraction of a molecular gas to xenon reduces electron diffusion. On the other hand, the electroluminescence (EL) yield drops and the achievable energy resolution may be compromised. We have studied the effect of adding several molecular gases to xenon (CO2, CH4 and CF4) on the EL yield and energy resolution obtained in a small prototype of driftless gas proportional scintillation counter. We have compared our results on the scintillation characteristics (EL yield and energy resolution) with a microscopic simulation, obtaining the diffusion coefficients in those conditions as well. Accordingly, electron diffusion may be reduced from about 10 mm/ sqrt(¿) for pure xenon down to 2.5 mm/sqrt(m) using additive concentrations of about 0.05%, 0.2% and 0.02% for CO2, CH4 and CF4, respectively. Our results show that CF4 admixtures present the highest EL yield in those conditions, but very poor energy resolution as a result of huge fluctuations observed in the EL formation. CH4 presents the best energy resolution despite the EL yield being the lowest. The results obtained with xenon admixtures are extrapolated to the operational conditions of the NEXT-100 TPC. CO2 and CH4 show potential as molecular additives in a large xenon TPC. While CO2 has some operational constraints, making it difficult to be used in a large TPC, CH4 shows the best performance and stability as molecular additive to be used in the NEXT-100 TPC, with an extrapolated energy resolution of 0.4% at 2.45 MeV for concentrations below 0.4%, which is only slightly worse than the one obtained for pure xenon. We demonstrate the possibility to have an electroluminescence TPC operating very close to the thermal diffusion limit without jeopardizing the TPC performance, if CO2 or CH4 are chosen as additives., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Marie Sklodowska-Curie Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad of Spain under grants FIS2014-53371-C04, the Severo Ochoa Program SEV-2014-0398 and the Maria de Maetzu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014, under project UID/FIS/04559/2013 to fund the activities of LIBPhys, and under grants PD/BD/105921/2014, SFRH/BPD/109180/2015 and SFRH/BPD/76842/2011; the U.S. Department of Energy under contracts number DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-AC02-06CH11357 (Argonne National Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0017721 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC-2015-18820. We also warmly acknowledge the Laboratori Nazionali del Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Modelling and validation of near-field Diesel spray CFD simulations based on the Σ -Y model

  • Desantes J.M.|||0000-0002-4124-9393
  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Pandal, A.
  • Naud, B.
  • Matusik, K.
  • Duke, D.
  • Kastengren, A.
  • Powell, C.
  • Schmidt, D.P.
[EN] Diesel spray modelling still remains a challenge, especially in the dense near-nozzle region. This region is difficult to experimentally access and also to model due to the complex and rapid liquid and gas interaction. Modelling approaches based on Lagrangian particle tracking have struggled in this area, while Eulerian modelling has proven particularly useful. An interesting approach is the single-fluid diffuse interface model known as Σ-Y, based on scale separation assumptions at high Reynolds and Weber numbers. Liquid dispersion is modelled as turbulent mixing of a variable density flow. The concept of surface area density is used for representing liquid structures, regardless of the complexity of the interface. In this work, an implementation of the Σ-Y model in the OpenFOAM CFD library is applied to simulate the ECN Spray A in the near nozzle region, using both RANS and LES turbulence modelling. Assessment is performed with measurements conducted at the Advanced Photon Source at Argonne National Laboratory (ANL). The ultra-smallangle x-ray scattering (USAXS) technique has been used to measure the interfacial surface area, and x-ray radiography to measure the fuel dispersion, allowing a direct evaluation of the Σ-Y model predictions., Authors acknowledge that part of this work was partially funded by the Spanish Ministry of Economy and Competitiveness in the frame of the COMEFF (TRA2014-59483-R) project. Parts of this research were performed at the 7-BM and 9-ID beam lines of the Advanced Photon Source at Argonne National Laboratory. Use of the APS is supported by the U.S. Department of Energy (DOE) under Contract No. DEAC02-06CH11357. The research was partially funded by DOE's Vehicle Technologies Program, Office of Energy Efficiency and Renewable Energy. The authors would like to thank Team Leaders Gurpreet Singh and Leo Breton for their support of this work
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

A study on the relationship between internal nozzle geometry and injected mass distribution of eight ECN Spray G nozzles

  • Matusik, Katarzyna
  • Duke, Daniel
  • Sovis, Nicholas
  • Swantek, Andrew
  • Powell, Christopher
  • Vaquerizo, Daniel
  • Giraldo Valderrama, Jhoan Sebastián
  • Kastengren, Alan
  • Payri, Raul|||0000-0001-7428-5510
[EN] Gasoline direct injection (GDI) nozzles are manufactured to meet geometric specifications with length scales on the order of a few hundred microns. The machining tolerances of these nominal dimensions are not always known due to the difficulty in accurately measuring such small length scales in a nonintrusive fashion. To gain insight into the variability of the machined dimensions as well as any effects that this variability may have on the fuel spray behavior, a series of measurements of the internal geometry and fuel mass distribution were performed on a set of eight nominally duplicate GDI “Spray G” nozzles provided by the Engine Combustion Network. The key dimensions of each of the eight nozzle holes were measured with micron resolution using full spectrum x-ray tomographic imaging at the 7-BM beamline of the Advanced Photon Source at Argonne National Laboratory. Fuel density distributions at 2 mm downstream of the nozzle tips were obtained by performing x-ray radiography measurements for many lines of sight. The density measurements reveal nozzle-to-nozzle as well as hole-to-hole density variations. The combination of high-resolution geometry and fuel distribution datasets allows spray phenomena to be linked to specific geometric characteristics of the nozzle, such as variability in the hole lengths and counterbore diameters, and the hole inlet corner radii. This analysis provides important insight into which geometrical characteristics of the nozzles may have the greatest importance in the development of the injected sprays, and to what degree these geometric variations might account for the total spray variability. The goal of this work is then to further the understanding of the relationship between internal nozzle geometry and fuel injection, provide input to improve computational models, and ultimately aid in optimizing injector design for higher fuel efficiency and lower emissions engines., This research was performed at the 7-BM beamline of the APS at Argonne National Laboratory. Use of the APS is supported by the U.S. Department of Energy (DOE) under Contract No. DE-AC02-06CH11357. We gratefully acknowledge the computing resources provided on Blues, a high-performance computing cluster operated by the Laboratory Computing Resource Center at Argonne National Laboratory. We thank Dr. Doga Gürsoy for the use of TomoPy and corresponding user support, as well as Dr. Xianghui Xiao at the APS 2-BM beamline for technical guidance in performing x-ray tomography. Argonne’s x-ray fuel injection research is sponsored by the DOE Vehicle Technologies Program under the direction of Gurpreet Singh and Leo Breton.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Engine combustion network (ECN): measurements of nozzle geometry and hydraulic behavior

  • Kastengren, Alan L
  • Tilocco, F. Zak
  • Powell, Christopher F.
  • Manin, Julien
  • Pickett, Lyle
  • Bazyn, Tim
  • Payri, Raul|||0000-0001-7428-5510
[EN] Despite the importance of sprays to engine combustion, understanding has been hampered by the sensitivity of spray behavior to unknown nozzle geometry effects. The Engine Combustion Network (ECN) collaboration has focused on overcoming this impediment to spray research by focusing on a set of nominally identical diesel injectors. Detailed measurements of the nozzle geometry for the four ECN Spray A injectors (90 mu m diameter, axial single-hole nozzles) have been performed using x-ray tomography, x-ray phase-contrast imaging, silicone molding, and optical microscopy. Measurements of the needle motions (axial and lateral) and hydraulic performance of the nozzles have also been performed. Measurements of the nozzle geometry show that all of the nozzle holes are offset from the axis of the needle and sac. This offset creates an asymmetry in the inlet condition of the nozzle hole, which varies from nozzle to nozzle. The nozzle profile deviates significantly from the nominal specification, with an abrupt convergence of the nozzle holes near the nozzle exit seen in all of the injectors. Nozzle diameter measurements show a smaller diameter than the nominal specification, with significant differences between the injectors. Needle lift measurements show oscillatory behavior in both the axial and lateral motions of the needle. The hydraulic characterization of the nozzles demonstrates the impact of internal geometry (outlet diameter) on momentum and mass flow rate., The phase-contrast x-ray imaging was performed at the 32ID beamline of the Advanced Photon Source, Argonne National Laboratory. The work performed at Argonne and the use of the APS are supported by the U. S. Department of Energy under Contract No. DE-AC02-06CH11357 and by the Department of Energy Vehicle Technologies Program, with Gurpreet Singh as Team Leader. Sandia National Laboratories research was also supported by the U.S. Department of Energy Vehicle Technologies Program. Measurements were performed at the Combustion Research Facility in Livermore, California. Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract NoDE-AC04-94AL85000.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dependence of polytetrafluoroethylene reflectance on thickness at visible and ultraviolet wavelengths in air

  • Ghosh, S.
  • Haefner, J.
  • Martín-Albo, J.
  • Guenette, R.
  • Li, X.
  • Loya Villalpando, A.A.
  • Burch, C.
  • Adams, C.
  • Arazi, L.
  • Arnquist, I.J.
  • Azevedo, C.D.R.
  • Bailey, K.
  • Benlloch-Rodríguez, J.M.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] Polytetrafluoroethylene (PTFE) is an excellent diffuse reflector widely used in light collection systems for particle physics experiments. However, the reflectance of PTFE is a function of its thickness. In this work, we investigate this dependence in air for light of wavelengths 260 nm and 450 nm using two complementary methods. We find that PTFE reflectance for thicknesses from 5 mm to 10 mm ranges from 92.5% to 94.5% at 450 nm, and from 90.0% to 92.0% at 260 nm We also see that the reflectance of PIFE of a given thickness can vary by as much as 2.7% within the same piece of material. Finally, we show that placing a specular reflector behind the PTFE can recover the loss of reflectance in the visible without introducing a specular component in the reflectance., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program grants SEV-2014-0398 and CEX2018-000867-S, and the Maria de Maeztu Program MDM-2016-0692; the Generalitat Valenciana under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014 and under projects UID/04559/2020 to fund the activities of LIBPhys-UC; the U.S. Department of Energy under contracts No. DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC0207CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE-SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington (USA). DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC2015-18820. JM-A acknowledges support from Fundacion Bancaria "la Caixa" (ID 100010434), grant code LCF/BQ/PI19/11690012. Finally, we thank Brendon Bullard, Paolo Giromini and Neeraj Tata for helpful discussions and assistance with preliminary measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

SIESTA-SIPs: Massively parallel spectrum-slicing eigensolver for an ab initio molecular dynamics package

  • Keçeli, Murat
  • Corsetti, Fabiano
  • Campos, Carmen
  • Zhang, Hong
  • Vazquez-Mayagoitia, Alvaro
  • Zapol, Peter
  • Wagner, Albert F.
  • Jose E. Roman|||0000-0003-1144-6772
[EN] Integration of Shift-and-Invert Parallel Spectral Transformation (SIPs) eigensolver (as implemented in the SLEPc library) into an ab initio molecular dynamics package, SIESTA, is described. The effectiveness of the code is demonstrated on applications to polyethylene chains, boron nitride sheets, and bulk water clusters. For problems with the same number of orbitals, the performance of the SLEPc eigensolver depends on the sparsity of the matrices involved, favoring reduced dimensional systems such as polyethylene or boron nitride sheets in comparison to bulk systems like water clusters. For all problems investigated, performance of SIESTA-SIPs exceeds the performance of SIESTA with default solver (ScaLAPACK) at the larger number of cores and the larger number of orbitals. A method that improves the load-balance with each iteration in the self-consistency cycle by exploiting the emerging knowledge of the eigenvalue spectrum is demonstrated. (c) 2018 Wiley Periodicals, Inc., Contract grant sponsor: Argonne National Laboratory, and by Basic Energy Science, provided by the Director, Office of Science, of the U.S. Department of Energy; Contract grant number: DE-AC02-06CH11357; Contract grant sponsor: The U.S. Department of Energy Office of Science, Office of Basic Energy Sciences Division of Materials Science and Engineering; Contract grant number: DE-AC02-06CH11357; Contract grant sponsor: The Spanish Ministry of Economy and Competitiveness; Contract grant number: TIN2016-75985-P (including European Commission FEDER funds)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Demonstration of the event identification capabilities of the NEXT-White detector

  • Ferrario, Paola
  • Benlloch-Rodríguez, J.M.
  • Díaz López, G.
  • Hernando Morata, J.A.
  • Kekic, M.
  • Renner, J.
  • Usón, A.
  • Gómez-Cadenas, J.J.
  • Adams, C.
  • Arazi, L.
  • Arnquist, I.J.
  • Azevedo, C.D.R.
  • Bailey, K.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] In experiments searching for neutrinoless double-beta decay, the possibility of identifying the two emitted electrons is a powerful tool in rejecting background events and therefore improving the overall sensitivity of the experiment. In this paper we present the first measurement of the efficiency of a cut based on the different event signatures of double and single electron tracks, using the data of the NEXT-White detector, the first detector of the NEXT experiment operating underground. Using a 228Th calibration source to produce signal-like and background-like events with energies near 1.6 MeV, a signal efficiency of 71.6 ± 1.5 stat ± 0.3 sys% for a background acceptance of 20.6 ± 0.4 stat ± 0.3 sys% is found, in good agreement with Monte Carlo simulations. An extrapolation to the energy region of the neutrinoless double beta decay by means of Monte Carlo simulations is also carried out, and the results obtained show an improvement in background rejection over those obtained at lower energies., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Marie Sklodowska-Curie Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program SEV-2014-0398 and the Maria de Maetzu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014, under project UID/FIS/04559/2013 to fund the activities of LIBPhys, and under grants PD/BD/FBD/105921/2014, SFRH/BPD/109180/2015 and SFRH/BPD/76842/2011; the U.S. Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE-SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC-2015-18820. We also warmly acknowledge the Laboratori Nazionali del Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving the User Experience of the rCUDA Remote GPU Virtualization Framework

  • Reaño González, Carlos
  • Peña Monferrer, Antonio José
  • Mayo Gual, Rafael
  • Duato Marín, José Francisco
  • Silla, Federico|||0000-0002-6435-1200
  • Castelló, Adrián|||0000-0002-8576-8451
  • Quintana-Ortí, Enrique S.|||0000-0002-5454-165X
Graphics processing units (GPUs) are being increasingly embraced by the high-performance computing community as an effective way to reduce execution time by accelerating parts of their applications. remote CUDA (rCUDA) was recently introduced as a software solution to address the high acquisition costs and energy consumption of GPUs that constrain further adoption of this technology. Specifically, rCUDA is a middleware that allows a reduced number of GPUs to be transparently shared among the nodes in a cluster. Although the initial prototype versions of rCUDA demonstrated its functionality, they also revealed concerns with respect to usability, performance, and support for new CUDA features. In response, in this paper, we present a new rCUDA version that (1) improves usability by including a new component that allows an automatic transformation of any CUDA source code so that it conforms to the needs of the rCUDA framework, (2) consistently features low overhead when using remote GPUs thanks to an improved new communication architecture, and (3) supports multithreaded applications and CUDA libraries. As a result, for any CUDA-compatible program, rCUDA now allows the use of remote GPUs within a cluster with low overhead, so that a single application running in one node can use all GPUs available across the cluster, thereby extending the single-node capability of CUDA. Copyright © 2014 John Wiley & Sons, Ltd., This work was funded by the Generalitat Valenciana under Grant PROMETEOII/2013/009 of the PROMETEO program phase II. The author from Argonne National Laboratory was supported by the US Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357. The authors are also grateful for the generous support provided by Mellanox Technologies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo de revisión (ReviewArticle)

Measurement of energy resolution with the NEXT-White silicon photomultipliers

  • Contreras, T.
  • Palmeiro, B.
  • Almazán, H.
  • Para, A.
  • Martinez-Lema, G.
  • Guenette, R.
  • Adams, C.
  • Aparicio, B.
  • Aranburu, A. I.
  • Arazi, L.
  • Arnquist, I.J.
  • Auria-Luna, F.
  • Ayet, S.
  • Azevedo, C.D.R.
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] The NEXT-White detector, a high-pressure gaseous xenon time projection chamber, demonstrated the excellence of this technology for future neutrinoless double beta decay searches using photomultiplier tubes (PMTs) to measure energy and silicon photomultipliers (SiPMs) to extract topology information. This analysis uses 83mKr data from the NEXT-White detector to measure and understand the energy resolution that can be obtained with the SiPMs, rather than with PMTs. The energy resolution obtained of (10.9±0.6)%, full-width half-maximum, is slightly larger than predicted based on the photon statistics resulting from very low light detection coverage of the SiPM plane in the NEXT-White detector. The difference in the predicted and measured resolution is attributed to poor corrections, which are expected to be improved with larger statistics. Furthermore, the JHEP09(2024)112 noise of the SiPMs is shown to not be a dominant factor in the energy resolution and may be negligible when noise subtraction is applied appropriately, for high-energy events or larger SiPM coverage detectors. These results, which are extrapolated to estimate the response of large coverage SiPM planes, are promising for the development of future, SiPM-only, readout planes that can offer imaging and achieve similar energy resolution to that previously demonstrated with PMTs., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreement No. 951281-BOLD; the European Union’s Framework Programme for Research and Innovation, Horizon 2020 (2014–2020), under Grant Agreement No. 957202-HIDDEN; Spain’s MCIN/AEI and the ERDF (“A way of making Europe”) under grants PID2021-125475NB and the Severo Ochoa Programme grant CEX2018-000867-S; the Generalitat Valenciana (Spain) under grants PROMETEO/2021/087 and CIDEGENT/2019/049; the Department of Education of the Basque Government (Spain) under the predoctoral training programme for non-doctoral research personnel; the “la Caixa” Foundation (ID 100010434) under fellowship code LCF/BQ/PI22/11910019; the Portuguese Foundation for Science and Technology (FCT) under project UID/FIS/04559/2020 supporting the activities of LIBPhys-UC; the Israel Science Foundation (ISF) under grant 1223/21; the Pazy Foundation (Israel) under grants 310/22, 315/19, and 465; the U.S. Department of Energy under contract numbers DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M), DE-SC0019054 (The University of Texas at Arlington), and DE-SC0019223 (The University of Texas at Arlington); the U.S. National Science Foundation under award NSF CHE-2004111; and the Robert A. Welch Foundation under award Y-2031-20200401. Finally, we are grateful to the Laboratorio Subterráneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Internal and near nozzle measurements of Engine Combustion Network &quot, Spray G&quot, gasoline direct injectors

  • Duke, Daniel J.
  • Kastengren, Alan L.
  • Matusik, Katarzyna E.
  • Swantek, Andrew B.
  • Powell, Christopher F.
  • Vaquerizo, Daniel
  • Itani, Lama
  • Bruneaux, Gilles
  • Grover Jr., Ronald O.
  • Parrish, Scott
  • Markle, Lee
  • Schmidt, D.
  • Manin, Julien
  • Skeen, Scott A.
  • Pickett, L.M.
  • Payri, Raul|||0000-0001-7428-5510
[EN] Gasoline direct injection (GDI) sprays are complex multiphase flows. When compared to multi-hole diesel sprays, the plumes are closely spaced, and the sprays are more likely to interact. The effects of multi-jet interaction on entrainment and spray targeting can be influenced by small variations in the mass fluxes from the holes, which in turn depend on transients in the needle movement and small-scale details of the internal geometry. In this paper, we present a comprehensive overview of a multi-institutional effort to experimentally characterize the internal geometry and near-nozzle flow of the Engine Combustion Network (ECN) Spray G gasoline injector. In order to develop a complete pictitre of the near-nozzle flow, a standardized setup was shared between facilities. A wide range of techniques were employed, including both X-ray and visible-light diagnostics. The novel aspects of this work include both new experimental measurements, and a comparison of the results across different techniques and facilities. The breadth and depth of the data reveal phenomena which were not apparent from analysis of the individual data sets. We show that plume-to-plume variations in the mass fluxes from the holes can cause large-scale asymmetries in the entrainment field and spray structure. Both internal flow transients and small-scale geometric features can have an effect on the external flow. The sharp turning angle of the flow into the holes also causes an inward vectoring of the plumes relative to the hole drill angle, which increases with time due to entrainment of gas into a low-pressure region between the plumes. These factors increase the likelihood of spray collapse with longer injection durations., The X-ray experiments were performed at the 7-BM and 32-ID beam lines of the APS at Argonne National Laboratory. Use of the APS is supported by the U.S. Department of Energy (DOE) under Contract No. DE-AC02-06CH11357. Research was also performed at the Combustion Research Facility, Sandia National Laboratories, Livermore, California. Sandia National Laboratories is managed and operated by National Technology and Engineering Solutions of Sandia LLC, a wholly owned subsidiary of Honeywell International, Inc., for the U.S. Department of Energy National Nuclear Security Administration under contract DE-NA-0003525.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Regioselective Generation of Single-Site Iridium Atoms and Their Evolution into Stabilized Subnanometric Iridium Clusters in MWW Zeolite

  • Liu, Lichen
  • Lopez-Haro, Miguel
  • Meira, Debora M.
  • Calvino, Jose J.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Preparation of supported metal catalysts with uniform particle size and coordination environment is a challenging and important topic in materials chemistry and catalysis. In this work, we report the regioselective generation of single-site Ir atoms and their evolution into stabilized subnanometric Ir clusters in MWW zeolite, which are located at the 10MR window connecting the two neighboring 12MR supercages. The size of the subnanometric Ir clusters can be controlled by the post-synthesis treatments and maintain below 1 nm even after being reduced at 650 degrees C, which cannot be readily achieved with samples prepared by conventional impregnation methods. The high structure sensitivity, size-dependence, of catalytic performance in the alkane hydrogenolysis reaction of Ir clusters in the subnanometric regime is evidenced., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683). The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. High-resolution STEM measurements were performed at the DME-UCA node of the ELECMI National Singular Infrastruture, in Cadiz University, with financial support from FEDER/MINECO (MAT2017-87579-R and MAT2016-81118-P). This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, and was supported by the U.S. DOE under Contract No.DE-AC02-06CH11357, and the Canadian Light Source and its funding partners. The financial support from ExxonMobil on this project is also greatly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Quantitative analysis of dribble volumes and rates using three-dimensional reconstruction of X-ray and diffused back-illumination images of diesel sprays

  • Sechenyh, Vitaliy
  • Duke, Daniel J.
  • Swantek, Andrew B.
  • Matusik, Katarzyna E.
  • Kastengren, Alan L.
  • Powell, Christopher F.
  • Viera, Alberto
  • Crua, Cyril
  • Payri, Raul|||0000-0001-7428-5510
[EN] Post-injection fuel dribble is known to lead to incomplete atomisation and combustion due to the release of slow-moving, and often surface-bound, liquid fuel after the end of injection. This can have a negative effect on engine emissions, performance and injector durability. To better quantify this phenomenon, we developed an image-processing approach to measure the volume of ligaments produced during the end of injection. We applied our processing approach to an Engine Combustion Network 'Spray B' 3-hole injector, using datasets from 220 injections generated by different research groups, to decouple the effect of gas temperature and pressure on the fuel dribble process. High-speed X-ray phase-contrast images obtained at room temperature conditions (297 K) at the Advanced Photon Source at Argonne National Laboratory, together with diffused back-illumination images captured at a wide range of temperature conditions (293-900 K) by CMT Motores Termicos were analysed and compared quantitatively. We found a good agreement between image sets obtained by Argonne National Laboratory and CMT Motores Termicos using different imaging techniques. The maximum dribble volume within the field of view of the imaging system and the mean rate of fuel dribble were considered as characteristic parameters of the fuel dribble process. Analysis showed that the absolute mean dribble rate increases with temperature when injection pressure is higher than 1000 bar and slightly decreases at high injection pressures (>500 bar) when temperature is close to 293 K. Larger maximum volumes of the fuel dribble were observed at lower gas temperatures (similar to 473 K) and low gas pressures (<30 bar), with a slight dependence on injection pressure., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The image processing research was supported by the United Kingdom's Engineering and Physical Science Research Council (Grants EP/K020528/1 and EP/M009424/1) and BP Formulated Products Technology. The X-ray measurements were performed at the Advanced Photon Source at Argonne National Laboratory. Use of the Advanced Photon Source (APS) is supported by the U.S. Department of Energy (DOE) under Contract No. DEAC02-06CH11357. The X-ray component of this research was partially funded by DOE's Vehicle Technologies Program, Office of Energy Efficiency and Renewable Energy.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical Methodology for Optimization of Compression-Ignited Engines Considering Combustion Noise Control

  • Broatch, A.|||0000-0001-9991-1039
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Pinaki, Pal
  • Som, Sibendu
[EN] It is challenging to develop highly efficient and clean engines while meeting user expectations in terms of performance, comfort and drivability. One of the critical aspects in this regard is combustion noise control. Combustion noise accounts for about 40 percent of the overall engine noise in typical turbocharged diesel engines. The experimental investigation of noise generation is difficult due to its inherent complexity and measurement limitations. Therefore, it is important to develop efficient numerical strategies in order to gain a better understanding of the combustion noise mechanisms. In this work, a novel methodology was developed, combining computational fluid dynamics (CFD) modeling and genetic algorithm (GA) technique to optimize the combustion system hardware design of a high-speed direct injection (HSDI) diesel engine, with respect to various emissions and performance targets including combustion noise. The CFD model was specifically set up to reproduce the unsteady pressure field inside the combustion chamber, thereby allowing an accurate prediction of the acoustic response of the combustion phenomena. The model was validated by simulating several steady operating conditions and comparing the numerical results against experimental data, in both temporal and frequency domains. Thereafter, a GA optimization was performed with the goal of minimizing indicated specific fuel consumption (ISFC) and combustion noise, while restricting pollutant (soot and NOx) emissions to their respective baseline values. Eight design variables were selected pertaining to piston bowl geometry, nozzle inclusion angle, number of injector nozzle holes and in-cylinder swirl. An objective merit function based on the emissions, ISFC and combustion noise, was constructed to quantify the strength of the engine designs, and was determined using the CFD model as the function evaluator. The in-cylinder noise level was characterized by the total resonance energy of local pressure oscillations. The optimum engine configuration thus obtained, showed a significant improvement in terms of efficiency and combustion noise compared to the baseline system, along with both soot and NOx emissions within their respective constraints. This optimum configuration included a deeper and tighter bowl geometry with higher swirl and larger number of nozzle holes. Subsequently, a more detailed acoustics analysis based on proper orthogonal decomposition (POD) technique was carried out to further explore the combustion noise benefits achieved by the GA optimum. This computational study is a first of its kind (to the best of the authors¿ knowledge), which demonstrates a comprehensive framework to incorporate combustion noise into a numerical optimization strategy for engine design., The equipment used in this work was partially supported by FEDER and the Spanish Government through grant no. DPI2015-70464-R and by Fondo Europeo de Desarrollo Regional (FEDER) project funds "Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT), (FEDER-ICTS-2012-06)," framed in the operational program of unique scientific and technical infrastructure of the Spanish Ministerio de Economia y Competitividad. J. Gomez-Soriano was partially supported through contract FPI-S2-2016-1353 of the "Programa de Apoyo para la Investigacion y Desarrollo (PAID-01-16)" of Universitat Politecnica de Valencia. The submitted manuscript was created partly by UChicago Argonne, LLC, Operator of Argonne National Laboratory. Argonne, a US Department of Energy (DOE) Office of Science laboratory, is operated under Contract No. DE-AC02-06CH11357. This research was partly funded by the US DOE Office of Vehicle Technologies, Office of Energy Efficiency and Renewable Energy under Contract No. DE-AC02-06CH11357. The authors wish to thank Gurpreet Singh and Leo Breton, program managers at DOE, for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rh2P Nanoparticles Stabilized by Carbon Patches for Hydroformylation of Olefins

  • Galdeano-Ruano, Carmen Piedad
  • Wittee Lopes, Christian
  • Motta Meira, Debora
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Rh2P nanoparticles (NPs) have been identified as suitable mimics of [Rh-I(Ph3P)(3)](+), the benchmark of homogeneous catalysts in liquid-phase hydroformylation. For this reason, a fitted synthetic strategy is required to develop catalysts based exclusively on Rh2P NPs. To attain this, two synthetic pathways have been devised. In the first one, two separate sources of Rh and P were used. In the second one, the Wilkinson complex was employed as a unique source of Rh and P to probe the positive influence of the well-defined molecular organization on the preparation of dispersed and controlled Rh2P nanoparticles, stabilized by carbon patches formed during the pyrolysis treatment from PPh3. In addition, metallic Rh nanoparticles were also synthesized to be used as reference. All catalysts have been compared by means of: transmission electron microscopy, Xray diffraction, and X-ray adsorption spectroscopy. The application of XAS to the study of Rh2P NPs is unusual and has been essential in the discussion of the results. Starting with a well-defined metal precursor leads to the exclusive formation of Rh2P NPs with excellent catalytic activity for the liquid-phase hydroformylation. The role of P is to modulate the particle size and the electronic configuration of Rh species, resulting in the improvement of the catalytic performance and the obtention of turnover frequencies of 5236 h(-1) at 60 degrees C and 17,788 h(-1) at 100 degrees C., Program Severo Ochoa SEV-2016-0683 is gratefully acknowledged. C.G.-R. thanks MINECO for her FPU Ph.D. contract FPU17/04172. The authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00). The authors thank J.G.M. for his technical support. We also thank the Electron Microscopy Service of the UPV for TEM facilities. C.W.L. thanks PRH 50.1 - ANP/FINEP Human Resources Program for the Visiting Researcher Fellowship. This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by the Argonne National Laboratory and was supported by the U.S. DOE under contract no. DE-AC02-06CH11357 and the Canadian Light Source and its funding partners.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Eco-designed ultra-small copper/ionic liquid interfaces on layered niobates for hydrogen production via water-splitting and methanol photoreforming

  • Chacón-Rosales, Gustavo Javier|||0000-0001-5280-608X
  • Lima, Rafael C.
  • Rodembusch, Fabiano S.
  • de Moraes Lisboa, Allan
  • Radtke, Claudio
  • Feil, Adriano F.
  • Lopes, Christian W.
  • Meira, Deborah
  • Pergher, Sibele
  • Dupont, Jairton
[EN] This study presents a fast and eco-friendly strategy to develop a photocatalytic system based on potassium hexaniobate K4Nb6O17·xH2O (KNbO) modified with sub-nanometric copper clusters (SNCu) produced via sputtering. Despite the low metal loading (0.6 wt%), the material shows excellent hydrogen production from methanol photoreforming (MPR) and water splitting reaction (WSR) under simulated sunlight. Encapsulation with the ionic liquid [BMIm][NTf2] (IL@SNCu@KNbO) further enhances activity and stability, reaching 170 ¿mol H2 (4000 ¿mol g¿1 h¿1; AQY = 26.8 %) and outperforming SNCu@KNbO (160 ¿mol) and pristine KNbO (2.9 ¿mol). Structural and spectroscopic analyses confirm homogeneous SNCu dispersion and strong metal-semiconductor interactions. The IL plays a key role in improving interfacial charge dynamics, forming a polar nanolayer that increases the band gap (from 3.64 to 3.81 eV), broadens the valence band, and suppresses photoluminescence by ¿ 80 %, evidencing reduced recombination. XPS and solid-state NMR demonstrate that the IL remains chemically stable, protecting SNCu sites against aggregation and photo-corrosion. Replicate experiments show that while the IL significantly enhances pristine KNbO, its effect is partially masked in SNCu@KNbO due to the strong electron-sink behavior of the ultra-small copper clusters. Stability tests reveal consistent performance over four cycles, with moderate activity loss after the sixth cycle associated with 0.84 ppm Cu in solution and TGA indications of partial IL restructuring. Overall, the catalyst remains functional and durable by four cycles, demonstrating the potential of combining sputtered SNCu clusters with IL encapsulation as a sustainable route for hydrogen generation using low metal loadings and environmentally friendly processing., The authors thank the financial support from CAPES (001) , FAPERGS (22/2551-0000386-9 and 18/2551-0000561-4) , and CNPq (406260/2018-4) . GC-R Acknowledges the financial support of ANP/FINEP (01.19.0225.00) , FGCSIC ComFuturo/Horizon 2020 program (Marie Sk & lstrok;odowska-Curie grant agreement No. 10103426) and , Severo Ochoa center of excellence program (CEX2021-001230-S) . This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory and was supported by the U.S. DOE under Contract No. DE-AC02-06CH11357, and the Canadian Light Source and its funding partners. This research used resources of the Brazilian Synchrotron Light Laboratory (LNLS) , an open national facility operated by the Brazilian Centre for Research in Energy and Materials (CNPEM) from the Brazilian Ministry for Science, Technology, In-novations, and Communications (MCTIC) . The IPE beamline staff is acknowledged for the assistance during experiments. A very special thanks to Professor Edilson V. Benvenutti for the superficial and BET analysis, to the Central Laboratory of Electron Microscopy LabCEMM at PUCRS for the TEM analysis, and Dr. Li Chen and Chinese National Laboratory of Nanotechnology for complementary HRTEM analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-pressure structural, elastic, and thermodynamic properties of zircon-type HoPO4 and TmPO4

  • Gomis, O.|||0000-0001-6763-0638
  • Lavina, B.
  • Rodriguez-Hernandez, P.
  • Muñoz, A.
  • Errandonea, R.
  • Errandonea, Daniel
  • Bettinelli, M.
[EN] Zircon-type holmium phosphate (HoPO4) and thulium phosphate (TmPO4) have been studied by single-crystal x-ray diffraction and ab initio calculations. We report on the influence of pressure on the crystal structure, and on the elastic and thermodynamic properties. The equation of state for both compounds is accurately determined. We have also obtained information on the polyhedral compressibility which is used to explain the anisotropic axial compressibility and the bulk compressibility. Both compounds are ductile and more resistive to volume compression than to shear deformation at all pressures. Furthermore, the elastic anisotropy is enhanced upon compression. Finally, the calculations indicate that the possible causes that make the zircon structure unstable are mechanical instabilities and the softening of a silent B-1u mode., This research is partially supported by the Spanish government MINECO under Grants No: MAT2016-75586-C4-1-P/2-P/3-P, MAT2013-46649-C4-1-P/2-P/3-P and MAT2015-71070-REDC. A.M. and P.R-H. acknowledge computing time provided by Red Espanola de Supercomputacion (RES) and MALTA-Cluster. This work was also partially supported by the National Nuclear Security Administration under the Stewardship Science Academic Alliances program through DOE Cooperative Agreement No. DE-NA0001982. Part of this work was conducted at HPCAT (Sector 16), Advanced Photon Source (APS), Argonne National Laboratory and at the Advanced Light Source (ALS), Lawrence Berkeley National Laboratory (LBNL). HPCAT operations are supported by DOE-NNSA under Award No. DE-NA0001974 and DOE-BES under Award No. DE-FG02-99ER45775, with partial instrumentation funding by NSF. APS is supported by DOE-BES, under Contract No. DE-AC02-06CH11357. The ALS is supported by the Director, Office of Science, Office of Basic Energy Sciences of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. Use of the COMPRES-GSECARS gas loading system was supported by COMPRES under NSF Cooperative Agreement EAR 11-57758 and by GSECARS through NSF grant EAR-1128799 and DOE grant DE-FG02-94ER14466.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sensitivity of the NEXT experiment to 124-Xe double electron capture

  • Martinez-Lema, G.
  • Martinez-Vara, M.
  • Sorel, M.
  • Adams, C.
  • Arazi, L.
  • Arnquist, I.J.
  • Azevedo, C. D. R.
  • Bailey, K.
  • Benlloch-Rodriguez, J. M.
  • Borges, F. I. G. M.
  • Byrnes, N.
  • Carcel, S.
  • Carrión, J. V.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] Double electron capture by proton-rich nuclei is a second-order nuclear process analogous to double beta decay. Despite their similarities, the decay signature is quite di erent, potentially providing a new channel to measure the hypothesized neutrinoless mode of these decays. The Standard-Model-allowed two-neutrino double electron capture has been predicted for a number of isotopes, but only observed in 78Kr, 130Ba and, recently, 124Xe. The sensitivity to this decay establishes a benchmark for the ultimate experimental goal, namely the potential to discover also the lepton-number-violating neutrinoless version of this process. Here we report on the current sensitivity of the NEXT-White detector to 124Xe 2 ECEC and on the extrapolation to NEXT-100. Using simulated data for the 2 ECEC signal and real data from NEXT-White operated with 124Xe-depleted gas as background, we de ne an optimal event selection that maximizes the NEXT-White sensitivity. We estimate that, for NEXT-100 operated with xenon gas isotopically enriched with 1 kg of 124Xe and for a 5-year run, a sensitivity to the two-neutroni double electron capture half-life of 6x10exp22 years (at 90% con dence level) or better can be reached., The NEXT collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Marie Sklodowska-Curie Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program grants SEV-2014-0398 and CEX2018-000867-S, and the Maria de Maeztu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014, under project UID/FIS/04559/2013 to fund the activities of LIBPhys, and under grants PD/BD/105921/2014, SFRH/BPD/109180/2015 and SFRH/BPD/76842/2011; the U.S. Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE-SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC-2015-18820. We also warmly acknowledge the Laboratori Nazionali del Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Investigation of the effects of turbulence modeling on the prediction of compression-ignition combustion unsteadiness

  • Broatch, A.|||0000-0001-9991-1039
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Pal, P.
[EN] Adverse effects of global warming due to the greenhouse gas emissions is changing the actual paradigm for the use energy resources. In the absence of a mid-term solution for reducing these emissions in transportation, internal combustion (IC) engines are going to coexist in the social spheres in the foreseeable future. Therefore, the study of other IC engine-related problems remains relevant to ensuring the health of the society. In this investigation, a numerical methodology for comprehensive understanding of Noise, Vibration and Harshness in internal combustion engines is proposed. Due to its inherent complexity and lack of awareness, the main objective is to evaluate the impact of the turbulence modeling framework on the in-cylinder acoustic field recreation. Modal decomposition methods have been applied to isolate the coherent flow structures and to analyze how they change with the turbulence approach. Results demonstrate that the choice of the turbulence model is a critical aspect for noise modeling. Unsteady Reynolds-Averaged Navier-Stokes schemes predict a raw estimation of the internal acoustic field with the added value of being computationally less expensive. However, the use of more complex turbulence approaches such us large eddy simulation offers an accurate prediction of the acoustic structures and their cyclic dispersion., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The equipment used in this work has been partially supported by FEDER project funds "Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT)'' [grant number FEDER-ICTS-2012-06], framed in the operational program of unique scientific and technical infrastructure of the Spanish Government. The submitted manuscript was created partly by UChicago Argonne, LLC, Operator of Argonne National Laboratory. Argonne, a U.S. Department of Energy Office of Science laboratory, is operated under Contract No. DE-AC02-06CH11357. This research was partly funded by U.S. DOE Office of Vehicle Technologies, Office of Energy Efficiency and Renewable Energy under Contract No. DE-AC0206CH11357.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Trapping of Metal Atoms and Metal Clusters by Chabazite under Severe Redox Stress

  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Serna Merino, Pedro Manuel
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Gabay, J. E.
  • Kliewer, C. E.
[EN] The remarkable ability of Al-containing CHA zeolite to trap and stabilize noble single-metal atoms and metal clusters has facilitated the design of sinter-resistant materials for catalytic applications that require severe reaction conditions. At high temperatures in O-2, volatile MOx species appear to be fixated by the zeolite Al centers to prevent Ostwald-ripening sintering mechanisms, whereas small metal clusters (<100 atoms) are stabilized in H-2 without further aggregation as coalescence by Brownian motion is inhibited because of an encapsulation effect. Evidences of the possibility to trap the metal released from a second adjacent surface (e.g., SiO2 and Al2O3), upon metal migration over micrometer distances, are provided. These properties have opened the possibility to prepare several noble-metal atoms and clusters inside small-pore zeolites, including bimetallic formulation, by simple wetness impregnations or solid-to-solid transformations followed by standard calcination procedures, resulting in improved catalytic performances compared to other nonreducible supports in reactions that subject the catalysts to severe redox stress, such as the water-gas-shift reaction., This work has been supported by the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267) and MAT2015-71261-R, by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Fundacion Ramon Areces through a research contract of the "Life and Materials Science" program. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. This research used beamline 9-BM and 20-ID of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. We thank Isabel Millet, Elisa Garcia, and Paul Stevens for technical assistance, and Aaron Sattler, Randall Meyer, Rob Carr, and Gary Casty for review of the manuscript and interesting scientific discussions. We appreciate the support of ExxonMobil Research and Engineering in this fundamental research area.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High voltage delivery and distribution for the NEXT-100 Time Projection Chamber

  • Adams, C.
  • Almazan, H.
  • Bailey, K.
  • Guenette, R.
  • Jones, B. J. P.
  • Johnston, S.
  • Mistry, K.
  • Monrabal, F.
  • Nygren, D. R.
  • Palmeiro, B.
  • Rogers, L.
  • Waldschmidt, J.
  • Aranburu, A. I.
  • Arazi, L.
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • García-Barrena, Jara
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] A critical element in the realization of large liquid and gas time projection chambers (TPCs) is the delivery and distribution of high voltages into and around the detector. Such experiments require of order tens of kilovolts to enable electron drift over meter-scale distances. This paper describes the design and operation of the cathode feedthrough and high voltage distribution through the field cage of the NEXT-100 experiment, an underground TPC that will search for neutrinoless double beta decay 0v beta beta The feedthrough has been demonstrated to hold pressures up to 20 bar and sustain voltages as high as -65 kV. The TPC is operating stably at its design high voltages. The system has been realized within the constraints of a stringent radiopurity budget and is now being used to execute a suite of sensitive double beta decay analyses., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreement No. 951281-BOLD; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 957202-HIDDEN; the MCIN/AEI of Spain and ERDF A way of making Europe under grants PID2021-125475NB and RTI2018-095979, and the Severo Ochoa and Maria de Maeztu Program grants CEX2023-001292-S, CEX2023-001318-M and CEX2018-000867-S; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087 and CISEJI/2023/27; the Department of Education of the Basque Government of Spain under the predoctoral training program non-doctoral research personnel; the Spanish la Caixa Foundation (ID 100010434) under fellowship code LCF/BQ/PI22/11910019; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Israel Science Foundation (ISF) under grant 1223/21; the Pazy Foundation (Israel) under grants 310/22, 315/19 and 465; the US Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M), DE-SC0019054 (Texas Arlington) and DE-SC0019223 and DE-SC0024438 (Texas Arlington); the US National Science Foundation under award number NSF CHE 2004111; the Robert A Welch Foundation under award number Y-2031-20200401. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sensitivity of a tonne-scale NEXT detector for neutrinoless double-beta decay searches

  • Adams, C.
  • Alvarez, V.
  • Arazi, L.
  • Arnquist, I.J.
  • Azevedo, C.D.R.
  • Bailey, K.
  • Benlloch-Rodriguez, J. M.
  • Borges, F. I. G. M.
  • Byrnes, N.
  • Carcel, S.
  • Carrión, J.V.
  • Cebrian, S.
  • Church, E.
  • Conde, C. A. N.
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] The Neutrino Experiment with a Xenon TPC (NEXT) searches for the neutrinoless double-beta (0 nu beta beta) decay of Xe-136 using high-pressure xenon gas TPCs with electroluminescent amplification. A scaled-up version of this technology with about 1 tonne of enriched xenon could reach in less than 5 years of operation a sensitivity to the half-life of 0 nu beta beta decay better than 10(27) years, improving the current limits by at least one order of magnitude. This prediction is based on a well-understood background model dominated by radiogenic sources. The detector concept presented here represents a first step on a compelling path towards sensitivity to the parameter space defined by the inverted ordering of neutrino masses, and beyond., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program grants SEV-2014-0398 and CEX2018-000867-S, and the Maria de Maeztu Program MDM2016-0692; the Generalitat Valenciana of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014 and under projects UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Pazy Foundation (Israel) under grants 877040 and 877041; the US Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC0207CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE-SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges support from the Ramon y Cajal program (Spain) under contract number RYC-2015-18820. JM-A acknowledges support from Fundacion Bancaria la Caixa (ID 100010434), grant code LCF/BQ/PI19/11690012, and from the Plan GenT program of the Generalitat Valenciana, grant code CIDEGENT/2019/049. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Influence of InfiniBand FDR on the performance of remote GPU virtualization

  • Reaño González, Carlos
  • Mayo Gual, Rafael
  • Duato Marín, José Francisco
  • Peña Monferrer, Antonio José
  • Quintana-Ortí, Enrique S.|||0000-0002-5454-165X
  • Silla, Federico|||0000-0002-6435-1200
The use of GPUs to accelerate general-purpose scientific and engineering applications is mainstream today, but their adoption in current high-performance computing clusters is impaired primarily by acquisition costs and power consumption. Therefore, the benefits of sharing a reduced number of GPUs among all the nodes of a cluster can be remarkable for many applications. This approach, usually referred to as remote GPU virtualization, aims at reducing the number of GPUs present in a cluster, while increasing their utilization rate. The performance of the interconnection network is key to achieving reasonable performance results by means of remote GPU virtualization. To this end, several networking technologies with throughput comparable to that of PCI Express have appeared recently. In this paper we analyze the influence of InfiniBand FDR on the performance of remote GPU virtualization, comparing its impact on a variety of GPU-accelerated applications with other networking technologies, such as Infini-Band QDR and Gigabit Ethernet. Given the severe limitations of freely available remote GPU virtualization solutions, the rCUDA framework is used as the case study for this analysis. Results show that the new FDR interconnect, featuring higher bandwidth than its predecessors, allows the reduction of the overhead of using GPUs remotely, thus making this approach even more appealing., This work was funded by the Generalitat Valenciana under Grant PROMETEOII/2013/009 of the PROMETEO program phase II. This work was supported in part by the U.S. Department of Energy under contract DE-AC02-06CH11357.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The NEXT-100 Detector

  • Adams, C.
  • Almazan, H.
  • Aranburu, A. I.
  • Arazi, L.
  • Arnquist, I. J.
  • Auria-Luna, F.
  • Ayet, S.
  • Ayyad, Y.
  • Azevedo, C. D. R.
  • Bailey, K.
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • García-Barrena, Jara
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • MARTÍNEZ PÉREZ, ALBERTO
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] The NEXT collaboration is dedicated to the study of double beta decays of 136\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$<^>{136}$$\end{document}Xe using a high-pressure gas electroluminescent time projection chamber. This advanced technology combines exceptional energy resolution (<= 1%\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\le 1\%$$\end{document} FWHM at the Q beta beta\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$Q_{\beta \beta }$$\end{document} value of the neutrinoless double beta decay) and powerful topological event discrimination. Building on the achievements of the NEXT-White detector, the NEXT-100 detector started taking data at the Laboratorio Subterr & aacute;neo de Canfranc (LSC) in May of 2024. Designed to operate with xenon gas at 13.5 bar, NEXT-100 consists of a time projection chamber where the energy and the spatial pattern of the ionising particles in the detector are precisely retrieved using two sensor planes (one with photo-multiplier tubes and the other with silicon photo-multipliers). The detector has been operating at stable conditions using argon and xenon gases at similar to\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sim $$\end{document}4 bar and drift fields of 74Vcm-1\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$74\hbox { V cm}<^>{-1}$$\end{document} and 118Vcm-1\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$118\hbox { V cm}<^>{-1}$$\end{document}, respectively. Alpha decays from the 222\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$<^>{222}$$\end{document}Rn chain have been used to test and monitor the stability of the detector, showing a constant electron lifetime in the drift volume. In this paper, in addition to reporting the results of the commissioning run, we provide a detailed description of the NEXT-100 detector, describe its assembly, and present the current estimation of the radiopurity budget., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreements No. 951281-BOLD and 101039048-GanESS; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 860881-HIDDeN; the MCIN/AEI of Spain and ERDF A way of making Europe under grants PID2021-125475NB and RTI2018-095979, and the Severo Ochoa and Maria de Maeztu Program grants CEX2023-001292-S, CEX2023-001318-M and CEX2018-000867-S; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087, ASFAE/2022/028, ASFAE/2022/029, CISEJI/2023/27, and CIDEXG/2023/16; the Department of Education of the Basque Government of Spain under the predoctoral training program non-doctoral research personnel; the Spanish la Caixa Foundation (ID 100010434) under fellowship code LCF/BQ/PI22/11910019; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Israel Science Foundation (ISF) under grant 1223/21; the Pazy Foundation (Israel) under grants 310/22, 315/19 and 465; the US Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M), DE-SC0019054, DE-SC0019223 and DE-SC0024438 (Texas Arlington); the US National Science Foundation under award number NSF CHE 2004111; the Robert A Welch Foundation under award number Y-2031-20200401. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Neutral Bremsstrahlung Emission in Xenon Unveiled

  • Henriques, C.A.O.
  • Amedo, P.
  • Teixeira, J. M. R.
  • González-Díaz, D.
  • Azevedo, C.D.R.
  • Para, A.
  • Martín-Albo,J.
  • Saa Hernandez, A.
  • Gómez-Cadenas, J. J.
  • Nygren, D. R.
  • Monteiro, C.M.B.
  • Adams, C.
  • Álvarez, V.
  • Arazi, L.
  • Arnquist, I.J.
  • Lopez-March, N.
  • Rodríguez, J.
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] We present evidence of non-excimer-based secondary scintillation in gaseous xenon, obtained using both the NEXT-White time projection chamber (TPC) and a dedicated setup. Detailed comparison with first-principle calculations allows us to assign this scintillation mechanism to neutral bremsstrahlung (NBrS), a process that is postulated to exist in xenon that has been largely overlooked., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Advanced Grant No. 339787-NEXT; the European Unions Framework Program for Research and Innovation Horizon 2020 (20142020) under Grant Agreements No. 674896, No. 690575, and No. 740055; the Ministerio de Economa y Competitividad and the Ministerio de Ciencia, Innovacin y Universidades of Spain under Grants No. FIS2014-53371-C04 and No. RTI2018-095979, the Severo Ochoa Program Grants No. SEV-2014-0398 and No. CEX2018-000867-S, and the Mara de Maeztu Program MDM-2016-0692; the Generalitat Valenciana under Grants No. PROMETEO/2016/120 and No. SEJI/2017/011; the Portuguese FCT under Project No. PTDC/FIS-NUC/3933/2021 and under Project No. UIDP/04559/2020 to fund the activities of LIBPhys-UC; the U.S. Department of Energy under Contracts No. DE-AC02-06CH11357 (Argonne National Laboratory), No. DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), No. DE-FG02-13ER42020 (Texas A&M), and No. DE-SC0019223/DE-SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington (USA). D. G.-D. acknowledges Ramon y Cajal program (Spain) under Contract No. RYC- 2015-18820. J. M.-A. acknowledges support from Fundacin Bancaria la Caixa (ID 100010434), Grant No. LCF/BQ/PI19/11690012. We would like to thank Lorenzo Muniz for insightful discussions on the subtleties of electron transport in gases.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural Evolution of CO2-Filled Pure Silica LTA Zeolite under High-Pressure High-Temperature Conditions

  • Santamaria-Perez, David
  • Marqueño, Tomás
  • MacLeod, Simon
  • Ruiz-Fuertes, Javier
  • Daisenberger, Dominik
  • Chulia-Jordan, Raquel
  • Errandonea, Daniel
  • McGuire, Chris
  • Mahkluf, Adam
  • Kavner, Abby
  • Popescu, Catalin
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The crystal structure of CO2-filled pure-SiO2 LTA zeolite has been studied at high pressures and temperatures using synchrotron-based X-ray powder diffraction. Its structure consists of 13 CO2 guest molecules, 12 of them accommodated in the large alpha-cages and one in the beta-cages, giving a SiO2/CO2 stoichiometric ratio smaller than 2. The structure remains stable under pressure up to 20 GPa with a slight pressure-dependent rhombohedral distortion, indicating that pressure-induced amorphization is prevented by the insertion of guest species in this open framework. The ambient temperature lattice compressibility has been determined. In situ high-pressure resistive-heating experiments up to 750 K allow us to estimate the thermal expansivity at P approximate to 5 GPa. Our data confirm that the insertion of CO2 reverses the negative thermal expansion of the empty zeolite structure. No evidence of any chemical reaction was observed. The possibility of synthesizing a silicon carbonate at high temperatures and higher pressures is discussed in terms of the evolution of C-O and Si-O distances between molecular and framework atoms., The authors thank the financial support of the Spanish Ministerio de Economia y Competitividad (MINECO), the Spanish Research Agency (AEI), and the European Fund for Regional Development (FEDER) under Grant Nos. MAT2016-75586-C4-1-P, MAT2015-71842-P, Severo Ochoa SEV-2012-0267, and No.MAT2015-71070-REDC (MALTA Consolider). D.S.-P. and J.R.-F. acknowledge MINECO for a Ramon y Cajal and a Juan de la Cierva contract, respectively. Portions of this work were performed at GeoSoilEnviroCARS (Sector 13), Advanced Photon Source (APS), Argonne National Laboratory. GeoSoilEnviroCARS is supported by the National Science Foundation - Earth Sciences (EAR-1128799) and Department of Energy- GeoSciences (DE-FG02-94ER14466). This research used resources of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. Use of the COMPRES-GSECARS gas loading system was supported by COMPRES under NSF Cooperative Agreement EAR 11-57758. CO<INF>2</INF> gas was also loaded at Diamond Light Source. Authors thank synchrotron ALBA-CELLS for beamtime allocation at MSPD line. British Crown Owned Copyright 2017/AWE. Published with permission of the Controller of Her Britannic Majesty's Stationery Office.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Radiogenic backgrounds in the NEXT double beta decay experiment

  • Novella, P.
  • Palmeiro, B.
  • Sorel, M.
  • Usón, A.
  • Ferrario, P.
  • Gómez-Cadenas, J. J.
  • Adams, C.
  • Arazi, L.
  • Arnquist, I.J.
  • Azevedo, C.D.R.
  • Bailey, K.
  • Benlloch-Rodríguez, J. M.
  • Borges, F. I. G. M.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] Natural radioactivity represents one of the main backgrounds in the search for neutrinoless double beta decay. Within the NEXT physics program, the radioactivity- induced backgrounds are measured with the NEXT-White detector. Data from 37.9 days of low-background operations at the Laboratorio Subterraneo de Canfranc with xenon depleted in Xe-136 are analyzed to derive a total background rate of (0.84 +/- 0.02) mHz above 1000 keV. The comparison of data samples with and without the use of the radon abatement system demonstrates that the contribution of airborne-Rn is negligible. A radiogenic background model is built upon the extensive radiopurity screening campaign conducted by the NEXT collaboration. A spectral fit to this model yields the specific contributions of Co-60, K-40, Bi-214 and Tl-208 to the total background rate, as well as their location in the detector volumes. The results are used to evaluate the impact of the radiogenic backgrounds in the double beta decay analyses, after the application of topological cuts that reduce the total rate to (0.25 +/- 0.01) mHz. Based on the best-fit background model, the NEXT-White median sensitivity to the two-neutrino double beta decay is found to be 3.5 sigma after 1 year of data taking. The background measurement in a Q(beta beta)+/- 100 keV energy window validates the best-fit background model also for the neutrinoless double beta decay search with NEXT-100. Only one event is found, while the model expectation is (0.75 +/- 0.12) events., The NEXT collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under the Advanced Grant 339787-NEXT; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under the Marie Sklodowska-Curie Grant Agreements No. 674896, 690575 and 740055; the Ministerio de Economia y Competitividad and the Ministerio de Ciencia, Innovacion y Universidades of Spain under grants FIS2014-53371-C04, RTI2018-095979, the Severo Ochoa Program SEV-2014-0398 and the Maria de Maetzu Program MDM-2016-0692; the GVA of Spain under grants PROMETEO/2016/120 and SEJI/2017/011; the Portuguese FCT under project PTDC/FIS-NUC/2525/2014, under project UID/FIS/04559/2013 to fund the activities of LIBPhys, and under grants PD/BD/105921/2014, SFRH/BPD/109180/2015 and SFRH/BPD/76842/2011; the U.S. Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M) and DE-SC0019223/DE-SC0019054 (University of Texas at Arlington); and the University of Texas at Arlington. DGD acknowledges Ramon y Cajal program (Spain) under contract number RYC-2015-18820. We also warmly acknowledge the Laboratori Nazionali del Gran Sasso (LNGS) and the Dark Side collaboration for their help with TPB coating of various parts of the NEXT-White TPC. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Boosting the performance of remote GPU virtualization using InfiniBand Connect-IB and PCIe 3.0

  • Reaño González, Carlos
  • Peña Monferrer, Antonio José
  • Shainer, Gilad
  • Schultz, Scot
  • Castello Gimeno, Adrián
  • Duato Marín, José Francisco
  • Silla, Federico|||0000-0002-6435-1200
  • Quintana-Ortí, Enrique S.|||0000-0002-5454-165X
[EN] A clear trend has emerged involving the acceleration of scientific applications by using GPUs. However, the capabilities of these devices are still generally underutilized. Remote GPU virtualization techniques can help increase GPU utilization rates, while reducing acquisition and maintenance costs. The overhead of using a remote GPU instead of a local one is introduced mainly by the difference in performance between the internode network and the intranode PCIe link. In this paper we show how using the new InfiniBand Connect-IB network adapters (attaining similar throughput to that of the most recently emerged GPUs) boosts the performance of remote GPU virtualization, reducing the overhead to a mere 0.19% in the application tested., This work was funded by the Generalitat Valenciana under Grant PROMETEOII/2013/009 of the PROMETEO program phase II. This material is based upon work supported by the U. S. Department of Energy, Office of Science, Advanced Scientific Computing Research (SC-21), under Contract No. DE-AC02-06CH11357. Authors from the Universitat Politècnica de València and Universitat Jaume I are grateful for the generous support provided by Mellanox Technologies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Demonstration of event position reconstruction based on diffusion in the NEXT-white detector

  • Haefner, J.
  • Navarro, K.E.
  • Guenette, R.
  • Jones, B.J.P.
  • Tripathi, Animesh
  • Adams, C.
  • Almazán, H.
  • Aparicio, B.
  • Aranburu, A. I.
  • Arazi, L.
  • Arnquist, I.J.
  • Auria-Luna, F
  • Ayet, S.
  • Azevedo, C.D.R.
  • Ballester, F.
  • Esteve, R.
  • Mora, F.J.
  • Rodríguez, J.
  • Herrero, V.
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
[EN] Noble element time projection chambers are a leading technology for rare event detection in physics, such as for dark matter and neutrinoless double beta decay searches. Time projection chambers typically assign event position in the drift direction using the relative timing of prompt scintillation and delayed charge collection signals, allowing for reconstruction of an absolute position in the drift direction. In this paper, alternate methods for assigning event drift distance via quantification of electron diffusion in a pure high pressure xenon gas time projection chamber are explored. Data from the NEXT-White detector demonstrate the ability to achieve good position assignment accuracy for both high- and low-energy events. Using point-like energy deposits from Kr-83m calibration electron captures (E similar to 45 keV), the position of origin of low-energy events is determined to 2 cm precision with bias <1 mm. A convolutional neural network approach is then used to quantify diffusion for longer tracks (E >= 1.5 MeV), from radiogenic electrons, yielding a precision of 3 cm on the event barycenter. The precision achieved with these methods indicates the feasibility energy calibrations of better than 1% FWHM at Q(beta beta) in pure xenon, as well as the potential for event fiducialization in large future detectors using an alternate method that does not rely on primary scintillation., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreement No. 951281-BOLD; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 957202-HIDDEN; the MCIN/AEI of Spain and ERDF A way of making Europe under grants PID2021-125475NB and the Severo Ochoa Program grant CEX2018-000867-S; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087 and CIDEGENT/2019/049; the Department of Education of the Basque Government of Spain under the predoctoral training program non-doctoral research personnel; the Spanish la Caixa Foundation (ID 100010434) under fellowship code LCF/BQ/PI22/11910019; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Israel Science Foundation (ISF) under grant 1223/21; the Pazy Foundation (Israel) under grants 310/22, 315/19 and 465; the US Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A &M), DE-SC0019054 (Texas Arlington) and DE-SC0019223 (Texas Arlington); the US National Science Foundation under award number NSF CHE 2004111; the Robert A Welch Foundation under award number Y-2031-20200401.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MOF-Mediated Synthesis of Supported Fe-Doped Pd Nanoparticles under Mild Conditions for Magnetically Recoverable Catalysis

  • Darawsheh, Mohanad D.
  • Mazarío-Santa-Pau, Jaime
  • Lopes, Christian W.
  • Gimenez-Marques, Monica
  • Meira, Debora M.
  • Martínez, Jordan Santiago
  • Minguez Espallargas, Guillermo
  • Domine, Marcelo Eduardo
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Metal-organic framework (MOF)-driven synthesis is considered as a promising alternative for the development of new catalytic materials with well-designed active sites. This synthetic approach is used here to gradually transform a new bimetallic MOF, with Pd and Fe as the metal components, by the in situ generation of aniline under mild conditions. This methodology results in a compositionally homogeneous nanocomposite formed by Fe-doped Pd nanoparticles that, in turn, are supported on iron oxide-doped carbon. The nanocomposite has been fully characterized by several techniques such as IR and Raman spectroscopy, TEM, XPS, and XAS. The performance of this nanocomposite as an heterogeneous catalyst for hydrogenation of nitroarenes and nitrobenzene coupling with benzaldehyde has been evaluated, proving it to be an efficient and reusable catalyst., This work has been supported by the European Union (ERC2016-CoG 724681-S-CAGE), by the Spanish MICINN (Structures of Excellence Severo Ochoa SEV-2016-0683 and Maria de Maeztu CEX2019-000919-M; projects CTQ2017-89528-P, CTQ2015-67592, PGC2018-097277-B-100, and RTI2018-096399A-I00 co-financed by FEDER). We also thank the Generalitat Valenciana (PROMETEO/2018/006 and PROMETEU/2019/066). G.M.E. and P.O.-B. thank MICINN for their "Ramon y Cajal" fellowships. M.G.-M thanks support of a fellowship from "la Caixa" Foundation (LCF/BQ/PI19/11690022) and Generalitat Valenciana (SEJI/2020/036). J.M. thanks MICINN for his PhD fellowship (CTQ2015-67592). The authors also thank the Electron Microscopy Service of Universitat Politicnica de Val~ncia for their support, M. P. Romero for her assistance with TEM measurements and Prof. E. Rodr~guez-Castellin for discussions on the XPS spectra interpretation. This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory and was supported by the U.S. DOE under contract no. DE-AC02-06CH11357, and the Canadian Light Source and its funding partners.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Measurement of the Xe 136 two-neutrino double -decay half-life via direct background subtraction in NEXT

  • Novella, P.
  • Sorel, M.
  • Usón, A.
  • Adams, C.
  • Almazán, H.
  • Aparicio, B.
  • Aranburu, A. I.
  • Arazi, L.
  • Arnquist, I.J.
  • Ayet, S.
  • Azevedo, D.C.R.
  • Bailey, K.
  • Benlloch-Rodriguez, J. M.
  • Lopez-March, N.
  • Rodríguez, J.
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] We report a measurement of the half-life of the 136Xe two-neutrino double-ß decay performed with a novel direct-background-subtraction technique. The analysis relies on the data collected with the NEXT-White detector operated with 136Xe-enriched and 136Xe-depleted xenon, as well as on the topology of double-electron tracks. With a fiducial mass of only 3.5 kg of Xe, a half-life of 2.34+0.80(stat)+0.30(sys)×1021 yr is derived from ¿0.46 ¿0.17 the background-subtracted energy spectrum. The presented technique demonstrates the feasibility of unique background-model-independent neutrinoless double-ß-decay searches., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant No. 951281-BOLD; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant No. 957202-HIDDEN; the MCIN/AEI/10.13039/501100011033 of Spain and ERDF "A way of making Europe" under Grant No. RTI2018-095979, the Severo Ochoa Program Grant No. CEX2018-000867-S, and the Maria de Maeztu Program Grant No. MDM-2016-0692; the Generalitat Valenciana of Spain under Grants No. PROMETEO/2021/087 and No. CIDEGENT/2019/049; the Portuguese FCT under Project No. UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Pazy Foundation (Israel) under Grants No. 877040 and No. 877041; the U.S. Department of Energy under Contracts No. DE-AC02-06CH11357 (Argonne National Laboratory), No. DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), No. DE-FG02-13ER42020 (Texas A&M), No. DE-SC0019054 (Texas Arlington), and No. DE-SC0019223 (Arlington, TX); the U.S. National Science Foundation under Grant No. CHE 2004111; and the Robert A. Welch Foundation under Grant No. Y-203120200401. D.G.D. acknowledges support from the Ramon y Cajal program (Spain) under Contract No. RYC-2015-18820. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-Pressure Synthesis of Ultra-Incompressible, Hard andSuperconducting Tungsten Nitrides

  • Liang, Akun
  • Osmond, Israel
  • Krach, Georg
  • Shi, Lan-Ting
  • Brüning, Lukas
  • Ranieri, Umbertoluca
  • Spender, James
  • Tasnadi, Ferenc
  • Massani, Bernhard
  • Steven, Callum R.
  • Stewart McWilliams, Ryan
  • Lawrence Bright, Eleanor
  • Giordano, Nico
  • Yin, Yuqing
  • Gallego-Parra, Samuel|||0000-0001-6516-4303
[EN] Transition metal nitrides, particularly those of 5d metals, are known for their outstanding properties, often relevant for industrial applications. Among these metal elements, tungsten is especially attractive given its low cost. In this high-pressure investigation of the W-N system, two novel ultra-incompressible tungsten nitride superconductors, namely W2N3 and W3N5, are successfully synthesized at 35 and 56 GPa, respectively, through a direct reaction between N2 and W in laser-heated diamond anvil cells. Their crystal structure is determined using synchrotron single-crystal X-ray diffraction. While the W2N3 solid's sole constituting nitrogen species are N3- units, W3N5 features both discrete N3- as well as N24- pernitride anions. The bulk modulus of W2N3 and W3N5 is experimentally determined to be 380(3) and 406(7) GPa, and their ultra-incompressible behavior is rationalized by their constituting WN7 polyhedra and their linkages. Importantly, both W2N3 and W3N5 are recoverable to ambient conditions and stable in air. Density functional theory calculations reveal W2N3 and W3N5 to have a Vickers hardness of 30 and 34 GPa, and superconducting transition temperatures at ambient pressure (50 GPa) of 11.6 K (9.8 K) and 9.4 K (7.2 K), respectively. Additionally, transport measurements performed at 50 GPa on W2N3 corroborate with the calculations., The authors acknowledge the European Synchrotron Radiation Facility (ESRF), the Deutsches Elektronen-Synchrotron (DESY), and Advanced Photon Source (APS), Argonne National Laboratory for the provision of beamtime at the ID11, ID15B, P02.2, and 13IDD beamlines, respectively. D.L. thanks the UKRI Future Leaders Fellowship (MR/V025724/1) for financial support. M.B. acknowledges the support of Deutsche Forschungsgemeinschaft (DFG Emmy-Noether project BY112/2-1). G.K. thanks the Friedrich Naumann Foundation for Freedom for a Ph.D. scholarship with Funds from the Federal Ministry of Education and Research (BMBF). B.M. and R.S.M. acknowledge the European Research Council (ERC) under the European Union s Horizon 2020 research and innovation program (Grant Agreement No. 101002868). Portions of this work were performed at GeoSoilEnviroCARS (University of Chicago, Sector 13), GeoSoilEnviroCARS was supported by the National Science Foundation Earth Sciences (EAR-1634415). This research used resources from the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DE-AC02-06CH11357. F.T. acknowledge support from the Knut and Alice Wallenberg Foundation (Wallenberg Scholar grant no. KAW-2018.0194). I.O. and M.P.A. thank UKRI Future Leaders fellowship Mrc-Mr/T043733/1 for the financial support. L.-T.S. acknowledges the Guangdong Basic and Applied Basic Research Foundation (Grant No. 2022a1515110404). Computations were enabled by resources provided by the National Academic Infrastructure for Supercomputing in Sweden (NAISS) and the Swedish National Infrastructure for Computing (SNIC) using Dardel at the PDC Center for High-Performance Computing, KTH Royal Institute of Technology and LUMI at the IT Center for Science (CSC), Finland partially funded by the Swedish Research Council through grant agreements no. 2022 06725 and no. 2018 05973. For the purpose of open access, the author had applied a Creative Commons Attribution (CC BY) license to any Author Accepted Manuscript version arising from this submission.