Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrogen consumption and durability assessment of fuel cell vehicles in realistic driving

  • Piras, M.
  • De Bellis, V.
  • Malfi, E.
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • López-Juárez, Marcos|||0000-0001-9886-4728
[EN] This study proposes a predictive equivalent consumption minimization strategy (P-ECMS) that utilizes velocity prediction and considers various dynamic constraints to mitigate fuel cell degradation assessed using a dedicated sub -model. The objective is to reduce fuel consumption in real -world conditions without prior knowledge of the driving mission. The P-ECMS incorporates a velocity prediction layer into the Energy Management System. Comparative evaluations with a conventional adaptive-ECMS (A-ECMS), a standard ECMS with a well -tuned constant equivalence factor, and a rule -based strategy (RBS) are conducted across two driving cycles and three fuel cell dynamic restrictions (|di/dt|max <= 0.1, 0.01, and 0.001 A/cm2s). The proposed strategy achieves H2 consumption reductions ranging from 1.4% to 3.0% compared to A-ECMS, and fuel consumption reductions of up to 6.1% when compared to RBS. Increasing dynamic limitations lead to increased H2 consumption and durability by up to 200% for all tested strategies., This research is part of the project TED2021-131463B-I00 (DI-VERGENT) funded by MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A methodology to develop multi-physics dynamic fuel cell system models validated with vehicle realistic drive cycle data

  • López-Juárez, Marcos|||0000-0001-9886-4728
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Rockstroh, T.
  • Vijayagopal, R.
[EN] Fuel cell (FC) technology has been identified as a technically attractive solution to decarbonize the transportation sector, especially for heavy-duty vehicles. In this context, the industry and the scientific community are in need of advanced fuel cell systems (FCS) models that are able to replicate real-world operating conditions. Due to the scarcity of said models in the open literature, this study aimed to develop a comprehensive methodology to calibrate and validate multi-physics dynamic FCS models. Therefore, the key contribution of this paper is the detailed description of the calibration process for each component and the calibration order. The specific focus here was to accurately describe the behavior of the FC stack as well as the cathode, anode, and cooling circuits of the balance of plant. The model was calibrated with the aid of experimental data from a Toyota Mirai FC electric vehicle, which was predominantly retrieved from the vehicle¿s Controller Area Network (CAN) bus system thereby negating the need for major intrusion into the powertrain system. The validation process was deemed successful with the model being able to truthfully replicate the characteristics of the FC vehicle operated on the World-wide harmonized Light duty Test Cycle (WLTC) 3b and US06 driving cycle. The time-resolved physical parameters such as the cathode pressure, mass flow, or the FC stack temperature were captured with high fidelity, while the overall performance parameters such as the H2 consumption in the stack and the system, and the compressor energy consumption were predicted accurately with a deviation lower than 0.47%, 1.75% and 1.89% with respect to the experimental data, respectively., This research is part of the project TED2021-131463B-I00 (DI-VERGENT) funded by MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR. It has also been partially funded by the Spanish Ministry of Science, Innovation, and University through the University Faculty Training (FPU) program (FPU19/00550) . Toby Rockstroh and Ram Vijayagopal acknowledge support through the US DOE Vehicle Technologies Program. Argonne National Laboratory is operated by UChicago Argonne, LLC under Contract no. DE-AC02-06CH11357. The US Government retains for itself, and others acting on its behalf, a paid-up non-exclusive, irrevocable worldwide license in said article to reproduce, prepare derivative works, distribute copies to the public, and perform publicly, by or on behalf of the Government. The authors would like to express their gratitude to Kevin Stutenberg from Argonne National Laboratory for the informative discussions surrounding the experimental test campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative analysis of powertrain architectures for fuel cell light commercial vehicles in terms of performance and durability

  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • López-Juárez, Marcos|||0000-0001-9886-4728
  • González-Domínguez, David
  • I. Nidaguila
[EN] At the present time, the critical climate situation has raised awareness about the importance of developing carbon-free technologies. In this context, fuel cell systems (FCS) have become one of the key technologies in the pathway to decarbonization. Given that road transport is a major contributor to greenhouse gas (GHG) emissions, this paper focuses on a specific segment of this sector: light commercial vehicles (LCVs). The current market situation shows that LCV manufacturers have not yet decided what is the appropriate powertrain architecture for this kind of vehicle. Thus, the current paper studies a wide range of possible FCS-based propulsive system designs, changing the size of the FCS, electric battery and H2 tank. These propulsive system architectures are analyzed concerning the performance of the vehicle, in terms of consumption and range, and the durability of its FCS. The evaluation of these different designs will be highly valuable for the LCV industry and manufacturers, as it allows to understand the optimal powertrain solution. The study demonstrates that a significant increase in range can be achieved with only a minor penalty in hydrogen consumption. Additionally, the research indicates that it is feasible to employ one of the most durable FCS designs while meeting LCV mission requirements with minimal consumption penalty. In conclusion, this paper provides valuable data to the ongoing research in this field, offering a detailed analysis of the impact of H2 consumption, autonomy, and durability of the FCS across various vehicle architectures under typical LCV driving conditions., This research has been partially funded by Universitat Politecnica de Valencia through the support program for research and de-velopment (PAID-01-22) and by the Generalitat Valenciana (Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital) as a part of the DEFIANCE research project (CIPROM/2021/039) through the PROMETEO funding program. The activities of this work are also part of TED2021-131463B-I00 (DIVERGENT) funded by MCIN/AEI/10.13039/501100011033 and the European Union "NextGenerationEU"/PRTR .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Potential of Proton-Exchange Membrane Fuel-Cell System with On-Board O2-Enriched Air Generation

  • Piqueras, P.|||0000-0002-3767-0839
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Lalangui-Gallegos, José Andrés
[EN] Hydrogen fuel-cell systems are one of the alternatives for the decarbonization of the transportation sector. In such systems, the usage of O-2-enriched air has the potential to improve fuel cell performance as well as to reduce degradation phenomena linked to local O-2 starvation. However, the production of an O-2-enriched air stream implies energy consumption that needs to be evaluated in the overall system efficiency. In this study, the potential of a system including polymeric membranes for O-2-N-2 separation to produce O-2-enriched air was evaluated theoretically. First, the balance of plant, including the O-2-N-2 separation membrane and a two-stage boosting system, was considered. Two sources of energy recovery were identified: a high-pressure H-2 stream and retentate flow (N-2-rich) at the outlet of the separation membrane. Then, the efficiency of the system was evaluated for different levels of O-2 enrichment, with sensitivities to the main operational and design parameters, i.e., cathode excess O-2 ratio, turbomachinery efficiency, essure ratios. The results show the potential for an O-2-enriched system if the energy recovered reaches approximately 25% of the additional power consumption induced by the separation membrane., This research was partially funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU /PRTR as part of the project TED2021-131463B-I00. In addition, José A. Lalangui acknowledges Ph.D. funding from the Universitat Politècnica de València through grant FPI-2022-S2-60162.