Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Determination of the Evolution of Heterogeneous Single Metal Atoms and Nanoclusters under Reaction Conditions: Which Are the Working Catalytic Sites?

  • Liu, Lichen
  • MEIRA, DEBORA M.
  • Arenal, Raul
  • Puga, Alberto V.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Identification of active sites in heterogeneous metal catalysts is critical for understanding the reaction mechanism at the molecular level and for designing more efficient catalysts. Because of their structural flexibility, subnanometric metal catalysts, including single atoms and clusters with a few atoms, can exhibit dynamic structural evolution when interacting with substrate molecules, making it difficult to determine the catalytically active sites. In this work, Pt catalysts containing selected types of Pt entities (from single atoms to clusters and nanoparticles) have been prepared, and their evolution has been followed, while they were reacting in a variety of heterogeneous catalytic reactions, including selective hydrogenation reactions, CO oxidation, dehydrogenation of propane, and photocatalytic H-2 evolution reaction. By in situ X-ray absorption spectroscopy, in situ IR spectroscopy, and high-resolution electron microscopy techniques, we will show that some characterization techniques carried out in an inadequate way can introduce confusion on the interpretation of coordination environment of highly dispersed Pt species. Finally, the combination of catalytic reactivity and in situ characterization techniques shows that, depending on the catalyst-reactant interaction and metal-support interaction, singly dispersed metal atoms can rapidly evolve into metal clusters or nanoparticles, being the working active sites for those abovementioned heterogeneous reactions., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683). L.L. thanks ITQ for providing a contract. The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, and was supported by the U.S. DOE under contract no. DE-AC02-06CH11357 and the Canadian Light Source and its funding partners. The HR STEM and STEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R.A. acknowledges support from Spanish MINECO grant MAT2016-79776-P (AEI/FEDER, UE), from the Government of Aragon and the European Social Fund (grant number E13_17R, FEDER, UE), and from the European Union H2020 program "ESTEEM3" (grant number 823717). A.V.P. thanks the Spanish Government (Agencia Estatal de Investigacion) and the European Union (European Regional Development Fund) for a grant for young researchers (CTQ2015-74138-JIN, AEI/FEDER/UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-Temperature Catalytic NO Reduction with CO by Subnanometric Pt Clusters

  • Fernández-Villanueva, Estefanía
  • Liu, Lichen
  • Arenal, Raul
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The catalytic subnanometric metal clusters with a few atoms can be regarded as an intermediate state between single atoms and metal nanoparticles (>1 nm). Their molecule-like electronic structures and flexible geometric structures bring rich chemistry and also a different catalytic behavior, in comparison with the single-atom or nanoparticulate counterparts. In this work, by combination of operando IR spectroscopy techniques and electronic structure calculations, we will show a comparative study on Pt catalysts for CO + NO reaction at a very low temperature range (140-200 K). It has been found that single Pt atoms immobilized on MCM-22 zeolite are not stable under reaction conditions and agglomerate into Pt nanoclusters and particles, which are the working active sites for CO + NO reaction. In the case of the catalyst containing Pt nanoparticles (similar to 2 nm), the oxidation of CO to CO2 occurs in a much lower extension, and Pt nanoparticles become poisoned under reaction conditions because of a strong interaction with CO and NO. Therefore, only subnanometric Pt clusters allow NO dissociation at a low temperature and CO oxidation to occur well on the surface, while CO interaction is weak enough to avoid catalyst poisoning, resulting in a good balance to achieve enhanced catalytic performance., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014671093, SynCatMatch) and the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683) and MAT2017-82288-C2-1-P projects. L.L. thanks ITQ for providing a contract. E.F. thanks MINECO for her fellowship SVP-2013-068146. The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. The HRSTEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. RA. acknowledges support from Spanish MINECO grant MAT2016-79776-P (AEI/FEDER, UE), from the Government of Aragon and the European Social Fund (grant number E13_17R, FEDER, UE), and from the European Union H2020 program "ESTEEM3" (grant number 823717). Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are acknowledged for computational resources and technical support.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Engineering the magnetic order in epitaxially strained Sr1-xBaxMnO3 perovskite thin films

  • Maurel, L.
  • Marcano, N.
  • Langenberg, E.
  • Guzman, R.
  • Prokscha, T.
  • Magen, C.
  • Pardo, J. A.
  • Algarabel, P. A.
Chemical doping and epitaxy can be used to tailor the magnetoelectric properties of multiferroic thin films, such as SrMnO3. Here, we study the dependence of the magnetic order temperatures of Sr1-xBaxMnO3 thin films on epitaxial strain and Ba content. Combining low-energy muon spin spectroscopy and scanning transmission electron microscopy, the broadness of the magnetic transition is attributed to the presence of a Mn-O-Mn angle gradient along the out-of-plane direction. We also demonstrate that the unit cell volume is the key parameter to determine the Neel temperature in Sr1-xBaxMnO3 thin films showing G-type antiferromagnetic order. The occurrence of a simultaneously ferroelectric and ferromagnetic ground state at high strain levels is suggested for the Sr0.8Ba0.2MnO3 thin film deposited on TbScO3.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mass Sensing for the Advanced Fabrication of Nanomechanical Resonators

  • Gruber, G.
  • Urgell, C.
  • Tavernarakis, A.
  • Stavrinadis, A.: Tepsic, S.
  • Magén, C.
  • Sangiao, S.
  • De Teresa, J.M.
  • Verlot, P.
  • Bachtold, A.
We report on a nanomechanical engineering method to monitor matter growth in real time via e-beam electromechanical coupling. This method relies on the exceptional mass sensing capabilities of nanomechanical resonators. Focused electron beam-induced deposition (FEBID) is employed to selectively grow platinum particles at the free end of singly clamped nanotube cantilevers. The electron beam has two functions: it allows both to grow material on the nanotube and to track in real time the deposited mass by probing the noise-driven mechanical resonance of the nanotube. On the one hand, this detection method is highly effective as it can resolve mass deposition with a resolution in the zeptogram range; on the other hand, this method is simple to use and readily available to a wide range of potential users because it can be operated in existing commercial FEBID systems without making any modification. The presented method allows one to engineer hybrid nanomechanical resonators with precisely tailored functionalities. It also appears as a new tool for studying the growth dynamics of ultrathin nanostructures, opening new opportunities for investigating so far out-of-reach physics of FEBID and related methods.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

NanoSQUID Magnetometry on Individual As-grown and Annealed Co Nanowires at Variable Temperature

  • Martínez-Pérez, M.J.
  • Pablo-Navarro, J.
  • Müller, B.
  • Kleiner, R.
  • Magén, C.
  • Koelle, D.
  • De Teresa, J.M.
  • Sesé, J.
Performing magnetization studies on individual nanoparticles is a highly demanding task, especially when measurements need to be carried out under large sweeping magnetic fields or variable temperature. Yet, characterization under varying ambient conditions is paramount in order to fully understand the magnetic behavior of these objects, e.g., the formation of nonuniform states or the mechanisms leading to magnetization reversal and thermal stability. This, in turn, is necessary for the integration of magnetic nanoparticles and nanowires into useful devices, e.g., spin-valves, racetrack memories, or magnetic tip probes. Here, we show that nanosuperconducting quantum interference devices based on high critical temperature superconductors are particularly well suited for this task. We have successfully characterized a number of individual Co nanowires grown through focused electron beam induced deposition and subsequently annealed at different temperatures. Magnetization measurements performed under sweeping magnetic fields (up to 100 mT) and variable temperature (1.4-80 K) underscore the intrinsic structural and chemical differences between these nanowires. These point to significant changes in the crystalline structure and the resulting effective magnetic anisotropy of the nanowires, and to the nucleation and subsequent vanishing of antiferromagnetic species within the nanowires annealed at different temperatures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Long-range vortex transfer in superconducting nanowires

  • Córdoba, Rosa
  • Orús, Pablo
  • Jelic, Željk L.
  • Sesé, Javier
  • Ibarra, Manuel Ricardo
  • Guillamón, Isabel
  • Vieira, Sebastián
  • Palacios, Juan José
  • Suderow, Hermann
  • Milosevic, Milorad V.
  • De Teresa, José María
Under high-enough values of perpendicularly-applied magnetic field and current, a type-II superconductor presents a finite resistance caused by the vortex motion driven by the Lorentz force. To recover the dissipation-free conduction state, strategies for minimizing vortex motion have been intensely studied in the last decades. However, the non-local vortex motion, arising in areas depleted of current, has been scarcely investigated despite its potential application for logic devices. Here, we propose a route to transfer vortices carried by non-local motion through long distances (up to 10 micrometers) in 50 nm-wide superconducting WC nanowires grown by Ga+ Focused Ion Beam Induced Deposition. A giant non-local electrical resistance of 36 O has been measured at 2 K in 3 µm-long nanowires, which is 40 times higher than signals reported for wider wires of other superconductors. This giant effect is accounted for by the existence of a strong edge confinement potential that hampers transversal vortex displacements, allowing the long-range coherent displacement of a single vortex row along the superconducting channel. Experimental results are in good agreement with numerical simulations of vortex dynamics based on the time-dependent Ginzburg-Landau equations. Our results pave the way for future developments on information technologies built upon single vortex manipulation in nano-superconductors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ultra-fast direct growth of metallic micro- and nano-structures by focused ion beam irradiation

  • Córdoba, Rosa
  • Orús, Pablo
  • Strohauer, Stefan
  • Torres, Teobaldo E.
  • De Teresa, José María
An ultra-fast method to directly grow metallic micro- and nano-structures is introduced. It relies on a Focused Ion Beam (FIB) and a condensed layer of suitable precursor material formed on the substrate under cryogenic conditions. The technique implies cooling the substrate below the condensation temperature of the gaseous precursor material, subsequently irradiating with ions according to the wanted pattern, and posteriorly heating the substrate above the condensation temperature. Here, using W(CO)6 as the precursor material, a Ga+ FIB, and a substrate temperature of -100 °C, W-C metallic layers and nanowires with resolution down to 38 nm have been grown by Cryogenic Focused Ion Beam Induced Deposition (Cryo-FIBID). The most important advantages of Cryo-FIBID are the fast growth rate (about 600 times higher than conventional FIBID with the precursor material in gas phase) and the low ion irradiation dose required (~50 µC/cm2), which gives rise to very low Ga concentrations in the grown material and in the substrate (=0.2%). Electrical measurements indicate that W-C layers and nanowires grown by Cryo-FIBID exhibit metallic resistivity. These features pave the way for the use of Cryo-FIBID in various applications in micro- and nano-lithography such as circuit editing, photomask repair, hard masks, and the growth of nanowires and contacts. As a proof of concept, we show the use of Cryo-FIBID to grow metallic contacts on a Pt-C nanowire and investigate its transport properties. The contacts have been grown in less than one minute, which is considerably faster than the time needed to grow the same contacts with conventional FIBID, around 10 hours.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Green synthesis of cavity-containing manganese oxides with superior catalytic performance in toluene oxidation

  • Garcia, Tomás
  • López, José Manuel
  • Mayoral, Álvaro
  • Zhang, Yaping
  • Arenal, Raul
  • Alonso-Dominguez, Daniel
  • Pico, María Pilar
  • Lopez, María Luisa
  • Dejoz, Ana
  • Alvarez-Serrano, Inmaculada
  • Sanchis, Rut
  • Solsona, Benjamín
Manganese oxide prepared by a simple hydrothermal method is highly active and stable in both lab and quasi industrial conditions for the total oxidation of toluene, achieving total conversion at only 175 degrees C in the absence of water and at 150 degrees C in the presence of 4 mol % water. Moreover, this performance is stable for at least 6 cycles. The enhanced catalytic performance has been related to the presence of highly reactive oxygen surface species. This species are probably promoted by Mn3O4 nanoparticles with Mn3+ at the tetragonal distorted cationic sites, likely compensated by structural water at the anionic sites. The presence of structural water can be related to the formation of internal cavities/vesicles in the Mn3O4 crystalline structure.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sonochemical edge functionalisation of molybdenum disulfide

  • Graf, Aline Amorim
  • Large, Matthew J.
  • Ogilvie, Sean P.
  • Rong, Yuanyang
  • Lynch, Peter J.
  • Fratta, Giuseppe
  • Ray, Santanu
  • Shmeliov, Aleksey
  • Nicolosi, Valeria
  • Arenal, Raul
  • King, Alice A. K.
  • Dalton, Alan B.
Liquid-phase exfoliation (LPE) has been shown to be capable of producing large quantities of high-quality dispersions suitable for processing into subsequent applications. LPE typically requires surfactants for aqueous dispersions or organic solvents with high boiling point. However, they have major drawbacks such as toxicity, aggregation during solvent evaporation or the presence of residues. Here, dispersions of molybdenum disulfide in acetone are prepared and show much higher concentration and stability than predicted by Hansen parameter analysis. Aiming to understand these enhanced properties, the nanosheets were characterised using UV-visible spectroscopy, zeta potential measurements, atomic force microscopy, Raman spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and scanning transmission microscopy combined with spatially-resolved electron energy loss spectroscopy. Also, the performance of the MoS2 nanosheets exfoliated in acetone was compared to that of those exfoliated in isopropanol as a catalyst for the hydrogen evolution reaction. The conclusion from the chemical characterisation was that MoS2 nanosheets exfoliated in acetone have an oxygen edge functionalisation, in the form of molybdenum oxides, changing its interaction with solvents and explaining the observed high-quality and stability of the resulting dispersion in a low boiling point solvent. Exfoliation in acetone could potentially be applied as a pretreatment to modify the solubility of MoS2 by edge functionalisation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ping-Pong Energy Transfer in Covalently Linked Porphyrin-MoS2 Architectures

  • Canton-Vitoria, Ruben
  • Scharl, Tobias
  • Stergiou, Anastasios
  • Cadranel, Alejandro
  • Arenal, Raul
  • Guldi, Dirk M.
  • Tagmatarchis, Nikos
Molybdenum disulfide nanosheets covalently modified with porphyrin were prepared and fully characterized. Neither the porphyrin absorption nor its fluorescence was notably affected by covalent linkage to MoS<inf>2</inf>. The use of transient absorption spectroscopy showed that a complex ping-pong energy-transfer mechanism, namely from the porphyrin to MoS<inf>2</inf> and back to the porphyrin, operated. This study reveals the potential of transition-metal dichalcogenides in photosensitization processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Low-Temperature Catalytic NO Reduction with CO by Subnanometric Pt Clusters

  • Fernández E.
  • Liu L.
  • Boronat M.
  • Arenal R.
  • Concepcion P.
  • Corma A.
The catalytic subnanometric metal clusters with a few atoms can be regarded as an intermediate state between single atoms and metal nanoparticles (>1 nm). Their molecule-like electronic structures and flexible geometric structures bring rich chemistry and also a different catalytic behavior, in comparison with the single-atom or nanoparticulate counterparts. In this work, by combination of operando IR spectroscopy techniques and electronic structure calculations, we will show a comparative study on Pt catalysts for CO + NO reaction at a very low temperature range (140-200 K). It has been found that single Pt atoms immobilized on MCM-22 zeolite are not stable under reaction conditions and agglomerate into Pt nanoclusters and particles, which are the working active sites for CO + NO reaction. In the case of the catalyst containing Pt nanoparticles (~2 nm), the oxidation of CO to CO2 occurs in a much lower extension, and Pt nanoparticles become poisoned under reaction conditions because of a strong interaction with CO and NO. Therefore, only subnanometric Pt clusters allow NO dissociation at a low temperature and CO oxidation to occur well on the surface, while CO interaction is weak enough to avoid catalyst poisoning, resulting in a good balance to achieve enhanced catalytic performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Determination of the Evolution of Heterogeneous Single Metal Atoms and Nanoclusters under Reaction Conditions: Which Are the Working Catalytic Sites?

  • Liu L.
  • Meira D.M.
  • Arenal R.
  • Concepcion P.
  • Puga A.V.
  • Corma A.
Identification of active sites in heterogeneous metal catalysts is critical for understanding the reaction mechanism at the molecular level and for designing more efficient catalysts. Because of their structural flexibility, subnanometric metal catalysts, including single atoms and clusters with a few atoms, can exhibit dynamic structural evolution when interacting with substrate molecules, making it difficult to determine the catalytically active sites. In this work, Pt catalysts containing selected types of Pt entities (from single atoms to clusters and nanoparticles) have been prepared, and their evolution has been followed, while they were reacting in a variety of heterogeneous catalytic reactions, including selective hydrogenation reactions, CO oxidation, dehydrogenation of propane, and photocatalytic H2 evolution reaction. By in situ X-ray absorption spectroscopy, in situ IR spectroscopy, and high-resolution electron microscopy techniques, we will show that some characterization techniques carried out in an inadequate way can introduce confusion on the interpretation of coordination environment of highly dispersed Pt species. Finally, the combination of catalytic reactivity and in situ characterization techniques shows that, depending on the catalyst-reactant interaction and metal-support interaction, singly dispersed metal atoms can rapidly evolve into metal clusters or nanoparticles, being the working active sites for those abovementioned heterogeneous reactions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Pyrene coating transition metal disulfides as protection from photooxidation and environmental aging

  • Canton-Vitoria, Rubén
  • Sayed-Ahmad-baraza, Yuman
  • Humbert, Bernad
  • Arenal, Raúl
  • Ewels, Christopher P.
  • Tagmatarchis, Nikos
Environmental degradation of transition metal disulfides (TMDs) is a key stumbling block in a range of applications. We show that a simple one-pot non-covalent pyrene coating process protects TMDs from both photoinduced oxidation and environmental aging. Pyrene is immobilized non-covalently on the basal plane of exfoliated MoS2 and WS2. The optical properties of TMD/pyrene are assessed via electronic absorption and fluorescence emission spectroscopy. High-resolution scanning transmission electron microscopy coupled with electron energy loss spectroscopy confirms extensive pyrene surface coverage, with density functional theory calculations suggesting a strongly bound stable parallel-stacked pyrene coverage of ~2–3 layers on the TMD surfaces. Raman spectroscopy of exfoliated TMDs while irradiating at 0.9 mW/4 µm2 under ambient conditions shows new and strong Raman bands due to oxidized states of Mo and W. Yet remarkably, under the same exposure conditions TMD/pyrene remain unperturbed. The current findings demonstrate that pyrene physisorbed on MoS2 and WS2 acts as an environmental barrier, preventing oxidative surface reactions in the TMDs catalyzed by moisture, air, and assisted by laser irradiation. Raman spectroscopy confirms that the hybrid materials stored under ambient conditions for two years remained structurally unaltered, corroborating the beneficial role of pyrene for not only hindering oxidation but also inhibiting aging.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Diameter modulation of 3D nanostructures in focused electron beam induced deposition using local electric fields and beam defocus

  • Pablo-Navarro, Javier
  • Sangiao, Soraya
  • Magén, César
  • De Teresa, José María
Focused electron beam induced deposition (FEBID) is a leading nanolithography technique in terms of resolution and the capability for three-dimensional (3D) growth of functional nanostructures. However, FEBID still presents some limitations with respect to the precise control of the dimensions of the grown nano-objects as well as its use on insulating substrates. In the present work, we overcome both limitations by employing electrically-biased metal structures patterned on the surface of insulating substrates. Such patterned metal structures serve for charge dissipation and also allow the application of spatially-dependent electric fields. We demonstrate that such electric fields can dramatically change the dimensions of the growing 3D nanostructures by acting on the primary electron beam and the generated secondary electrons. In the performed experiments, the diameter of Pt-C and W-C vertical nanowires grown on quartz, MgO and amorphous SiO2 is tuned by application of moderate voltages (up to 200 V) on the patterned metal microstructures during growth, achieving diameters as small as 50 nm. We identify two competing effects arising from the generated electric fields: a slight change in the primary beam focus point and a strong action on the secondary electrons. Beam defocus is exploited to achieve the in situ modulation of the diameter of 3D FEBID structures during growth.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Covalently Functionalized MoS2 with Dithiolenes

  • Sideri, IK
  • Arenal, R
  • Tagmatarchis, N
Advances are required to develop functionalization routes for MoS2, in both the metallic 1T and semi-conducting 2H phase, that will not only enable their easier manipulation and handling in liquid media but also enhance their applicability in diverse technological fields. Herein, we report an original functionalization methodology for covalently incorporating dithiolene units at the periphery of exfoliated 1T-and 2H-MoS2 sheets, by employing a bis(thiolate) salt as a ligand in a green and facile protocol. Extensive characterization of the covalently functionalized materials is presented, along with a pathway for the a la carte chemical manipulation of MoS2. Markedly, the reported methodology may be applied for modifying other transition metal dichalcogenides.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Comparison between focused electron/ion beam-induced deposition at room temperature and under cryogenic conditions

  • De Teresa, J. M.
  • Orús, P.
  • Córdoba, R.
  • Philipp, P.
In this contribution, we compare the performance of Focused Electron Beam-induced Deposition (FEBID) and Focused Ion Beam-induced Deposition (FIBID) at room temperature and under cryogenic conditions (the prefix "Cryo" is used here for cryogenic). Under cryogenic conditions, the precursor material condensates on the substrate, forming a layer that is several nm thick. Its subsequent exposure to a focused electron or ion beam and posterior heating to 50°C reveals the deposit. Due to the extremely low charge dose required, Cryo-FEBID and Cryo-FIBID are found to excel in terms of growth rate, which is typically a few hundred/thousand times higher than room-temperature deposition. Cryo-FIBID using the W(CO)6 precursor has demonstrated the growth of metallic deposits, with resistivity not far from the corresponding deposits grown at room temperature. This paves the way for its application in circuit edit and the fast and direct growth of micro/nano-electrical contacts with decreased ion damage. The last part of the contribution is dedicated to the comparison of these techniques with other charge-based lithography techniques in terms of the charge dose required and process complexity. The comparison indicates that Cryo-FIBID is very competitive and shows great potential for future lithography developments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High volume-per-dose and low resistivity of cobalt nanowires grown by Ga+ focused ion beam induced deposition

  • Sanz-Martín, C.
  • Magén, C.
  • De Teresa, J. M.
The growth of ferromagnetic nanostructures by means of focused-Ga+-beam-induced deposition (Ga+-FIBID) using the Co2(CO)8 precursor has been systematically investigated. The work aimed to obtain growth conditions allowing for the simultaneous occurrence of high growth speed, good lateral resolution, low electrical resistivity, and ferromagnetic behavior. As a first result, it has been found that the competition between deposition and milling that is produced by the Ga+ beam is a limiting factor. In our working conditions, with the maximum available precursor flux, the maximum deposit thickness has been found to be 65 nm. The obtained volumetric growth rate is at least 50 times higher than in the case of deposition by focused-electron-beam-induced deposition. The lateral resolution of the deposits can be as good as 50 nm while using Ga+-beam currents lower than 10 pA. The high metallic content of the as-grown deposits gives rise to a low electrical resistivity, within the range 20-40 µ¿cm. Magnetic measurements confirm the ferromagnetic nature of the deposits at room temperature. In conclusion, the set of obtained results indicates that the growth of functional ferromagnetic nanostructures by Ga+-FIBID while using the Co2(CO)8 precursor is a viable and competitive technique when compared to related nanofabrication techniques.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bottom-Up Synthesized MoS2 Interfacing Polymer Carbon Nanodots with Electrocatalytic Activity for Hydrogen Evolution

  • Kagkoura, A.
  • Canton-Vitoria, R.
  • Vallan, L.
  • Hernandez-Ferrer, J.
  • Benito, A.M.
  • Maser, W.K.
  • Arenal, R.
  • Tagmatarchis, N.
The preparation of an MoS2–polymer carbon nanodot (MoS2-PCND) hybrid material was accomplished by employing an easy and fast bottom-up synthetic approach. Specifically, MoS2-PCND was realized by the thermal decomposition of ammonium tetrathiomolybdate and the in situ complexation of Mo with carboxylic acid units present on the surface of PCNDs. The newly prepared hybrid material was comprehensively characterized by spectroscopy, thermal means, and electron microscopy. The electrocatalytic activity of MoS2-PCND was examined in the hydrogen evolution reaction (HER) and compared with that of the corresponding hybrid material prepared by a top-down approach, namely MoS2-PCND(exf-fun), in which MoS2 was firstly exfoliated and then covalently functionalized with PCNDs. The MoS2-PCND hybrid material showed superior electrocatalytic activity toward the HER with low Tafel slope, excellent electrocatalytic stability, and an onset potential of -0.16 V versus RHE. The superior catalytic performance of MoS2-PCND was rationalized by considering the catalytically active sites of MoS2, the effective charge/energy-transfer phenomena from PCNDs to MoS2, and the synergetic effect between MoS2 and PCNDs in the hybrid material.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Atmospheric pressure chemical vapor deposition growth of vertically aligned SnS2 and SnSe2 nanosheets

  • Sierra-Castillo, Ayrton
  • Haye, Emile
  • Acosta, Selene
  • Arenal, Raul
  • Bittencourt, Carla
  • Colomer, Jean-François
Laminated metal dichalcogenides are candidates for different potential applications ranging from catalysis to nanoelectronics. However, efforts are still needed to optimize synthesis methods aiming to control the number of layers, morphology, and crystallinity, parameters that govern the properties of the synthesized materials. Another important parameter is the thickness and the length of the samples with the possibility of large-scale growth of target homogeneous materials. Here, we report a chemical vapor deposition method at atmospheric pressure to produce vertically aligned tin dichalcogenide based-materials. Tin disulfide (SnS2) and tin diselenide (SnSe2) vertically aligned nanosheets have been synthesized and characterized by different methods showing their crystallinity and purity. Homogenous crystalline 2H-phase SnS2 nanosheets with high purity were synthesized with vertical orientation on substrates; sulfur vacancies were observed at the edges of the sheets. Similarly, in the crystalline 2H phase SnSe2 nanosheets selenium vacancies were observed at the edges. Moreover, these nanosheets are larger than the SnS2 nanosheets, show lower nanosheet homogeneity on substrates and contamination with selenium atoms from the synthesis was observed. The synthesized nanomaterials are interesting in various applications where the edge accessibility and/or directionality of the nanosheets play a major role as for example in gas sensing or field emission.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin glass state in strained La2/3Ca1/3MnO3 thinfilms

  • Lucas, Irene
  • Marcano, Noelia
  • Prokscha, Thomas
  • Magén, César
  • Corcuera, Rubén
  • Morellón, Luis
  • De Teresa, José M.
  • Ibarra, M. Ricardo
  • Algarabel, Pedro A.
Epitaxial strain modifies the physical properties of thin films deposited on single-crystal substrates. In a previous work, we demonstrated that in the case of La2/3Ca1/3MnO3 thin films the strain induced by the substrate can produce the segregation of a non-ferromagnetic layer (NFL) at the top surface of ferromagnetic epitaxial La2/3Ca1/3MnO3 for a critical value of the tetragonality τ, defined as τ = |c − a|a, of τC ≈ 0.024. Although preliminary analysis suggested its antiferromagnetic nature, to date a complete characterization of the magnetic state of such an NFL has not been performed. Here, we present a comprehensive magnetic characterization of the strain-induced segregated NFL. The field-cooled magnetic hysteresis loops exhibit an exchange bias mechanism below T ≈ 80 K, which is well below the Curie temperature of the ferromagnetic La2/3Ca1/3MnO3 layer. The exchange bias and coercive fields decay exponentially with temperature, which is commonly accepted to describe spin-glass (SG) behavior. The signatures of slow dynamics were confirmed by slow spin relaxation over a wide temperature regime. Low-energy muon spectroscopy experiments directly evidence the slowing down of the magnetic moments below ~100 K in the NFL. The experimental results indicate the SG nature of the NFL. This SG state can be understood within the context of the competing ferromagnetic and antiferromagnetic interactions of similar energies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Three-Dimensional Superconducting Nanohelices Grown by He+-Focused-Ion-Beam Direct Writing

  • Córdoba, R.
  • Mailly, D.
  • Rezaev, R.O.
  • Smirnova, E.I.
  • Schmidt, O.G.
  • Fomin, V.M.
  • Zeitler, U.
  • Guillamón, I.
  • Suderow, H.
  • De Teresa, J.M.
Novel schemes based on the design of complex three-dimensional (3D) nanoscale architectures are required for the development of the next generation of advanced electronic components. He+ focused-ion-beam (FIB) microscopy in combination with a precursor gas allows one to fabricate 3D nanostructures with an extreme resolution and a considerably higher aspect ratio than FIB-based methods, such as Ga+ FIB-induced deposition, or other additive manufacturing technologies. In this work, we report the fabrication of 3D tungsten carbide nanohelices with on-demand geometries via controlling key deposition parameters. Our results show the smallest and highest-densely packed nanohelix ever fabricated so far, with dimensions of 100 nm in diameter and aspect ratio up to 65. These nanohelices become superconducting at 7 K and show a large critical magnetic field and critical current density. In addition, given its helical 3D geometry, fingerprints of vortex and phase-slip patterns are experimentally identified and supported by numerical simulations based on the time-dependent Ginzburg-Landau equation. These results can be understood by the helical geometry that induces specific superconducting properties and paves the way for future electronic components, such as sensors, energy storage elements, and nanoantennas, based on 3D compact nanosuperconductors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

In situ real-time annealing of ultrathin vertical Fe nanowires grown by focused electron beam induced deposition

  • Pablo-Navarro, Javier
  • Winkler, Robert
  • Haberfehlner, Georg
  • Magen, César
  • Plank, Harald
  • Teresa, José María de
Focused Electron Beam Induced Deposition is a consolidated technique for the growth of three-dimensional (3D) nanostructures. However, this single-step nanofabrication method requires further efforts to optimize simultaneously dimensional and compositional properties, in particular for deposits with a high aspect ratio. More specifically, ferromagnetic 3D nanowires (NWs) with diameters in the sub-50 nm regime and high metallic contents up to 95 at. % attract great interest to improve the final performance of magnetic nanodevices such as magnetic tips for scanning probe microscopy. In this work, we report on real-time monitoring during chemical purification and structural crystallization processes of ultra-narrow 3D Fe NWs (<50 nm in diameter achieved) by post-growth in situ annealing in a transmission electron microscope. NW heating up to 700 degrees C in very high vacuum reveals the local increase of the metallic content along the entire NW length concomitant with the growth of large Fe single crystals from initially amorphous compounds. A metallic purity of 95 at. % is observed in several regions, dramatically boosting the initial Fe content of 40 at. %. The real-time in situ tracking of 3D nanostructures during thermal annealing is a key element to design and optimize novel purification processes for the fabrication of customized components to be integrated in spintronic, logic and sensing devices. (C) 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Detailed thermal reduction analyses of graphene oxide via in-situ TEM/EELS studies

  • Pelaez-Fernandez, M.
  • Bermejo, A.
  • Benito, A.M.
  • Maser, W.K.
  • Arenal, R.
We report an in-depth study of the reduction of graphene oxide (GO) by in-situ thermal transmission electron microscopy (TEM) analysis. In-situ heating high-resolution TEM (HRTEM) imaging and electron energy-loss spectroscopy (EELS) measurements have been combined to identify the transformations of different oxygen functional groups, the desorption of physisorbed and chemisorbed water and the graphitisation as a function of the temperature in the range from 70 up to 1200 °C. A model for the general removal of water and OFGs is proposed based on different chemical and physical parameters that have been monitored. All this unique information provides a detailed roadmap of the thermal behaviour of GO at an extended range of temperature. This is not only of interest to understand the thermal reduction process of GO but also of critical relevance to the response of GO in applications when exposed to thermal effects.