Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin glass state in strained La2/3Ca1/3MnO3 thinfilms

  • Lucas, Irene
  • Marcano, Noelia
  • Prokscha, Thomas
  • Magén, César
  • Corcuera, Rubén
  • Morellón, Luis
  • De Teresa, José M.
  • Ibarra, M. Ricardo
  • Algarabel, Pedro A.
Epitaxial strain modifies the physical properties of thin films deposited on single-crystal substrates. In a previous work, we demonstrated that in the case of La2/3Ca1/3MnO3 thin films the strain induced by the substrate can produce the segregation of a non-ferromagnetic layer (NFL) at the top surface of ferromagnetic epitaxial La2/3Ca1/3MnO3 for a critical value of the tetragonality τ, defined as τ = |c − a|a, of τC ≈ 0.024. Although preliminary analysis suggested its antiferromagnetic nature, to date a complete characterization of the magnetic state of such an NFL has not been performed. Here, we present a comprehensive magnetic characterization of the strain-induced segregated NFL. The field-cooled magnetic hysteresis loops exhibit an exchange bias mechanism below T ≈ 80 K, which is well below the Curie temperature of the ferromagnetic La2/3Ca1/3MnO3 layer. The exchange bias and coercive fields decay exponentially with temperature, which is commonly accepted to describe spin-glass (SG) behavior. The signatures of slow dynamics were confirmed by slow spin relaxation over a wide temperature regime. Low-energy muon spectroscopy experiments directly evidence the slowing down of the magnetic moments below ~100 K in the NFL. The experimental results indicate the SG nature of the NFL. This SG state can be understood within the context of the competing ferromagnetic and antiferromagnetic interactions of similar energies.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Low-resistivity, high-resolution W-C electrical contacts fabricated by direct-write focused electron beam induced deposition

  • Orús, Pablo
  • Sigloch, Fabian
  • Sangiao, Soraya
  • De Teresa, José María
Background: The use of a focused ion beam to decompose a precursor gas and produce a metallic deposit is a widespread nanolithographic technique named focused ion beam induced deposition (FIBID). However, such an approach is unsuitable if the sample under study is sensitive to the somewhat aggressive exposure to the ion beam, which induces the effects of surface amorphization, local milling, and ion implantation, among others. An alternative strategy is that of focused electron beam induced deposition (FEBID), which makes use of a focused electron beam instead, and in general yields deposits with much lower metallic content than their FIBID counterparts. Methods: In this work, we optimize the deposition of tungsten-carbon (W-C) nanowires by FEBID to be used as electrical contacts by assessing the impact of the deposition parameters during growth, evaluating their chemical composition, and investigating their electrical response. Results: Under the optimized irradiation conditions, the samples exhibit a metallic content high enough for them to be utilized for this purpose, showing a room-temperature resistivity of 550 μΩ cm and maintaining their conducting properties down to 2 K. The lateral resolution of such FEBID W-C metallic nanowires is 45 nm. Conclusions: The presented optimized procedure may prove a valuable tool for the fabrication of contacts on samples where the FIBID approach is not advised
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spatially selective crystallization of ferroelectric Hf0.5Zr0.5O2 films induced by sub-nanosecond laser annealing

  • Frechilla, Alejandro
  • Napari, Mari
  • Strkalj, Nives
  • Barriuso, Eduardo
  • Niang, Kham
  • Hellenbrand, Markus
  • Strichovanec, Pavel
  • Simanjuntak, Firman Mangasa
  • Antorrena, Guillermo
  • Flewitt, Andrew
  • Magén, César
  • de la Fuente, Germán F.
  • MacManus-Driscoll, Judith L.
  • Angurel, Luis Alberto
  • Pardo, José Ángel
In this work we study the sub-nanosecond laser-induced crystallization of 10 nm-thick atomic layer deposited amorphous Hf0.5Zr0.5O2 (HZO) films in an air atmosphere. We used an infrared laser with 1064 nm wavelength and 800 ps pulses to anneal TiN/HZO/TiN capacitors by scanning an 80 μm-diameter spot along their top surface in a controlled way. The laser annealing process was optimised in terms of fluence to achieve the complete crystallization of HZO into a non-monoclinic polymorph, as demonstrated by X-ray diffraction and transmission electron microscopy. Piezoresponse force microscopy and polarization-field loops confirm that the optimal as-annealed HZO films are piezoelectric and ferroelectric from the first cycle on. Spatial selectivity was accomplished by scanning the laser on selected areas of the samples. Micro-diffraction experiments show that the transition between the crystallized and the amorphous region is abrupt within a distance of several hundred µm.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Epitaxy-driven ferroelectric/non-ferroelectric polymorph selection in an all-fluorite system

  • Barriuso, Eduardo
  • Jiménez, Ricardo
  • Langenberg, Eric
  • Koutsogiannis, Panagiotis
  • Larrea, Ángel
  • Varela, Manuel
  • Magén, César
  • Algarabel, Pedro A.
  • Algueró, Miguel
  • Pardo, José A.
Films of ferroelectric hafnia have hitherto been deposited on electrodes with a non‐fluorite crystal structure. As a result, they are polycrystalline, contain fractions of non‐ferroelectric polymorphs or have poor crystal quality. Here, a strategy that circumvents all these limitations is shown. Seven nanometers‐thick epitaxial Hf0.5Zr0.5O2 (HZO) films are deposited directly on yttria‐stabilized zirconia (YSZ) single‐crystals. The fluorite structure of the whole system enables coherent epitaxy, while the substrate orientation induces polymorph‐selective growth, being the HZO films orthorhombic on YSZ(111) and monoclinic on YSZ(001). Besides, the YSZ substrate can play the role of a buried floating electrode under the appropriate measuring conditions (temperature and frequency) thanks to its thermally‐activated oxygen conductivity. Indeed, out‐of‐plane ferroelectric switching is confirmed in the orthorhombic HZO samples at 185 °C and 0.01 Hz frequency. This original approach avoids the need to deposit conducting bottom layers, allowing high‐quality orthorhombic hafnia to be obtained directly on the substrate and its ferroelectric nature to be studied. Moreover, it constitutes a case of ion‐driven ferroelectric switching, and thus gives support to the recently proposed relationship between ionic conductivity, and ferroelectricity in fluorite systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Focused Helium Ion and Electron Beam-Induced Deposition of Organometallic Tips for Dynamic Atomic Force Microscopy of Biomolecules in Liquid

  • Allen, Frances I.
  • De Teresa, José María
  • Onoa, Bibiana
We demonstrate the fabrication of sharp nanopillars of high aspect ratio onto specialized atomic force microscopy (AFM) microcantilevers and their use for high-speed AFM of DNA and nucleoproteins in liquid. The fabrication technique uses localized charged-particle-induced deposition with either a focused beam of helium ions or electrons in a helium ion microscope (HIM) or scanning electron microscope (SEM). This approach enables customized growth onto delicate substrates with nanometer-scale placement precision and in situ imaging of the final tip structures using the HIM or SEM. Tip radii of <10 nm are obtained and the underlying microcantilever remains intact. Instead of the more commonly used organic precursors employed for bio-AFM applications, we use an organometallic precursor (tungsten hexacarbonyl) resulting in tungsten-containing tips. Transmission electron microscopy reveals a thin layer of carbon on the tips. The interaction of the new tips with biological specimens is therefore likely very similar to that of standard carbonaceous tips, with the added benefit of robustness. A further advantage of the organometallic tips is that compared to carbonaceous tips they better withstand UV–ozone cleaning treatments to remove residual organic contaminants between experiments, which are inevitable during the scanning of soft biomolecules in liquid. Our tips can also be grown onto the blunted tips of previously used cantilevers, thus providing a means to recycle specialized cantilevers and restore their performance to the original manufacturer specifications. Finally, a focused helium ion beam milling technique to reduce the tip radii and thus further improve lateral spatial resolution in the AFM scans is demonstrated.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Polymer assisted deposition of YIG thin films with thickness control for spintronics applications

  • Corcuera, Rubén
  • Jiménez-Cavero, Pilar
  • Pérez del Real, Rafael
  • Rivadulla, Francisco
  • Ramos, Rafael
  • Morales-Aragonés, José Ignacio
  • Sangiao, Soraya
  • Magén, César
  • Morellón, Luis
  • Lucas, Irene
The use of magnetic garnets in new technologies such as spintronic devices requires fine-structured thin films. Classical fabrication techniques for these materials, typically physical vapor deposition methods, lead to excellent magnetic behavior. However, availability and scalability for potential applications are well restricted. In this study, we propose an innovative approach to fabricating Yttrium Iron Garnet thin films with precise thickness control achieved through iterative layer deposition via a chemical synthesis route. Remarkably, the iterative deposition process results in films exhibiting exceptional crystallinity. Magnetic characterization provides saturation magnetization and coercivity values on par with those reported in literature, summed to narrow ferromagnetic resonance lines. Therefore, in this work we demonstrate the viability of polymer assisted deposition as a promising alternative thinking about scalability to conventional deposition techniques for this material. Notably, our findings reveal energy conversion efficiencies comparable to those achieved with materials synthesized via physical vapor deposition methods.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Impact of the La2NiO4+d oxygen content on the synaptic properties of the TiN/La2NiO4+d/Pt memristive devices

  • Koroleva, Aleksandra
  • Khuu, Thoai-Khanh
  • Magén, César
  • Roussel, Hervé
  • Jiménez, Carmen
  • Ternon, Céline
  • Vatajelu, Elena-Ioana
  • Burriel, Mónica
The rapid development of brain‐inspired computing requires new artificial components and architectures for its hardware implementation. In this regard, memristive devices emerged as potential candidates for artificial synapses because of their ability to emulate the plasticity of the biological synapses. In this work, the synaptic behavior of the TiN/La2NiO4+δ/Pt memristive devices based on thermally annealed La2NiO4+δ films is thoroughly investigated. Using electron energy loss spectroscopy (EELS), it is shown that post‐deposition annealing using inert (Ar) or oxidizing (O2) atmospheres affects the interstitial oxygen content (δ) in the La2NiO4+δ films. Electrical characterization shows that both devices exhibit long‐term potentiation/depression (LTP/LTD) and spike‐timing‐dependent plasticity (STDP). At the same time, the Ar annealed TiN/La2NiO4+δ/Pt device demonstrates filamentary‐like behavior, fast switching, and low energy consumption. On the other hand, the O2 annealed TiN/La2NiO4+δ/Pt devices are forming‐free, exhibiting interfacial‐like resistive switching with slower kinetics. Finally, the simulation tools show that spiking neural network (SNN) architectures with weight updates based on the experimental data achieve high inference accuracy in the digit recognition task, which proves the potential of TiN/La2NiO4+δ/Pt devices for artificial synapse applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of Thermal Processing on the Structural and Magnetic Properties of Epitaxial Co2FeGe Films

  • Vovk, Andrii
  • Popadiuk, Dariia
  • Postolnyi, Bogdan
  • Bunyaev, Sergey
  • Štrichovanec, Pavel
  • Pardo, José Ángel
  • Algarabel, Pedro Antonio
  • Salyuk, Olga
  • Korenivski, Vladislav
  • Kakazei, Gleb N.
  • Golub, Vladimir O.
  • Araujo, João Pedro
The structure and magnetic properties of epitaxial Heusler alloy films (Co2FeGe) deposited on MgO (100) substrates were investigated. Films of 60 nm thickness were prepared by magnetron co-sputtering at different substrate temperatures (TS), and those deposited at room temperature were later annealed at various temperatures (Ta). X-ray diffraction confirmed (001) [110] Co2FeGe || (001) [100] MgO epitaxial growth. A slight tetragonal distortion of the film cubic structure was found in all samples due to the tensile stress induced by the mismatch of the lattice parameters between Co2FeGe and the substrate. Improved quality of epitaxy and the formation of an atomically ordered L21 structure were observed for films processed at elevated temperatures. The values of magnetization increased with increasing TS and Ta. Ferromagnetic resonance (FMR) studies revealed 45° in-plane rotation of the easy anisotropy axis direction depending on the degree of the tetragonal distortion. The film annealed at Ta = 573 K possesses the minimal FMR linewidth and magnetic damping, while both these parameters increase for another TS and Ta. Overall, this study underscores the crucial role of thermal treatment in optimizing the magnetic properties of Co2FeGe films for potential spintronic and magnonic applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

3D ice lithography and post-processing using gold organometallic precursor

  • Chang, Bingdong
  • Anand, Gwendoline A.E.
  • Le, Hoa Thanh
  • Liu, Xiyuan
  • Hansen, Thomas W.
  • de Teresa, Jose María
  • Han, Anpan
3D ice lithography (3DIL) is an emerging method for fabricating polymeric 3D objects with submicrometer patterns. However, there are no studies on 3DIL using metal-containing precursors. In addition, unlike numerous post-processing studies of two-photon polymerization (2PP) and focused electron beam-induced deposition (FEBID), there are no 3DIL post-processing investigations. Here, we present a 3DIL process using an organometallic precursor (gold dimethyl acetylacetonate, Au(acac)Me2), and its first post-processing study. We investigated 3D processing parameters and post-processing using Ar-, air annealing, and O2 plasma. X-ray photoelectron spectroscopy (XPS), atomic force microscopy, energy-dispersive X-ray spectroscopy, and transmission electron microscopy were used for materials analysis. Our results show (i) 3DIL processed materials exhibit thermoset properties, as they decompose rather than melt at elevated temperatures; (ii) free metal atoms diffuse and form clusters, here, gold nanoparticles with a diameter of around 10 nm were formed; (iii) oxygen treatments remove carbon-based ligands while leaving noble metals behind. Also, Ar annealing leads to less material loss than air annealing, while O2 plasma generates oxidized Au states and efficiently removes carbon ligands. Ar annealing at 600 °C reduces the carbon XPS signals significantly and increases the gold XPS signal by ten times, giving a good purification effect but with a high material removal of around 95 %. We printed large Au metalorganic 3D structures (>1000 times larger volume than FEBID), which suggests 3DIL bridges the gap between the capabilities of 2PP and FEBID. The unique capabilities of organometallic compounds to detect environmental changes can position 3DIL for sensing applications, and 3DIL is a safe and non-toxic technique to manufacture nanoparticle-containing 3D structures, which may have applications in many fields such as nanophotonics, drug delivery, and catalysis.