Pasar al contenido principal

VALORIZACION DE RECURSOS NATURALES COMO NUEVOS MATERIALES AVANZADOS :APLICACIONES CATALITICAS Y ELECTROQUIMICAS

MAT2017-84118-C2-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 45
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of annealing atmosphere on photoelectrochemical response of TiO2 nanotubes anodized under controlled hydrodynamic conditions

  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • García-García, D.M.|||0000-0001-8951-4558
  • Garcia-Anton, Jose|||0000-0002-0289-1324
  • Solsona, B.
  • Sánchez-Tovar, R.
  • Fernández Domene, R.M.
[EN] The influence of three annealing atmospheres (air, nitrogen and argon) and the use of controlled hydrodynamic conditions (from 0 to 5000 rpm) on morphological, structural, chemical and photoelectrochemical properties of TiO2 nanotubes have been evaluated. For this purpose, different characterization techniques have been used: Field Emission Scanning Electron Microscopy, Raman Confocal Laser Spectroscopy, X-Ray Diffraction, X-Ray Photoelectron Spectroscopy, Incident Photon-to-electron Conversion Efficiency measurements, ultraviolet-visible absorption spectra, Mott-Schottky analysis and photoelectrochemical water splitting tests. According to the results, it can be concluded that both hydrodynamic conditions and annealing in non-oxidizing atmospheres improve the photoelectrochemical response of the TiO2 nanotubes. This fact has been attributed to the oxygen vacancies formed after annealing in argon and nitrogen atmospheres and also to the presence of nitrogen into the TiO2 lattice due to the thermal treatment in the nitrogen atmosphere., The authors would like to express their gratitude for the financial support to the "Generalitat Valenciana (GV/2020/044) " as well as to the "Agencia Estatal de Investigacion" (Project Code: PID2019-105844RB-I00/AEI/10.13039/501100011033) ", for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) and the co-finance by the European Social Fund. Authors from UV also thank MINECO (MAT2017-84118-C2-1-R project) and FEDER for funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evolution of the optimal catalytic systems for the oxidative dehydrogenation of ethane: The role of adsorption in the catalytic performance

  • De Arriba-Mateos, Agustín
  • Solsona, Benjamin
  • Dejoz, Ana M.
  • Homs, Narcís
  • Ramírez de la Piscina, Pilar
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Three samples that correspond to the evolution of optimal catalytic systems for the oxidative dehydrogenation of ethane have been synthesized and compared in terms of catalytic behavior and adsorption properties: (i) vanadium oxide supported on alumina, (ii) Sn-promoted NiO, and (iii) multicomponent MoVTeNbO with the M1 structure. The main difference in catalytic performance lies in the extent of the overoxidation of the ethylene formed, following the order VOx/Al2O3 > NiSnOx > MoVTeNb-M1. Accordingly, the selectivity to ethylene at medium and high ethane conversion follows the order MoVTeNb-M1 > NiSnOx > VOx/Al2O3. These results are confirmed by the relative reaction rates observed for the oxidation of ethane and the oxidation of ethylene. Microcalorimetry studies indicate that the heat of adsorption of both ethane and ethylene is the highest in the most selective MoVTeNb-M1 sample. Thus, the low olefin decomposition in the MoVTeNb-M1 catalyst is not due to weaker adsorption of ethylene but to the reduced ability of its active sites to activate ethylene. The same conclusion regarding the MoVTeNb-M1 catalyst can be drawn by FT-IR of adsorbed ethylene. On the other hand, NiSnOx active sites present a high overoxidation ability, as demonstrated by the notorious formation of oxygenated species, precursors of COx. However, the ethylene decomposition is rather mild because of the existence of many free Lewis sites not involved in the overoxidation reaction. In contrast, in the case of the VOx/Al2O3 catalyst, almost all active sites are involved in the oxidation path, so that the olefins decompose readily., The authors acknowledge the Spanish Ministry of Science, Innovation and Universities (MCIU) for their funding (RTl2018-099668B-C21, MAT2017-84118-C2-1-R and MAT2017-87500-P) and FEDER. The authors from ITQ also thank Programa Severo Ochoa (SEV-2016-0683). A.A. acknowledges the Severo Ochoa Excellence Program for his grant (BES-2017-080329).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Indirect charge transfer of holes via surface states in ZnO nanowires for photoelectrocatalytic applications

  • Batista-Grau, P.
  • Fernández Domene, R. M.
  • Sánchez-Tovar, R.
  • Solsona, B.
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Garcia-Anton, Jose|||0000-0002-0289-1324
[EN] In this work, ZnO nanowires with high aspect ratio were obtained by fast and simple electrochemical anodization. Morphological, structural and photoelectrochemical characteristics of the synthesized ZnO nanowires were evaluated by using different techniques: field emission scanning electron microscopy, atomic force microscopy, high resolution transmission electron microscopy, Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, UV-VIS spectroscopy, Mott-Schottky analysis and photoelectrochemical impedance spectroscopy. The synthesized ZnO nanowires presented high roughness and high crystallinity. Besides, surface defects were identified in the sample. The value of the donor density (ND) was in the order of 1019 cm-3 in the dark and 1020 cm-3 under illumination. In addition, the ZnO nanowires presented good photosensibility, with a photocurrent density response 85 times higher than a ZnO compact layer, and lower resistance to charge transfer. The charge transfer processes taking place at the ZnO/electrolyte interface were studied, since these processes strongly influence the photoelectrocatalytic efficiency of the material. According to the results, the charge transfer of holes in the synthesized ZnO nanowires occurs indirectly via surface states. In this regard, surface states may be an important feature for photoelectrocatalytic applications since they could provide lower onset voltages and higher anodic current densities., Authors would like to express their gratitude to the Generalitat Valenciana and to the European Social Fund for their financial support within the subvention GJIDI/2018/A/067. Authors also thank to project co-funded by FEDER operational programme 2014-2020 of Comunitat Valenciana (IDIFEDER/18/044). Finally, authors thank to Ministerio de Ciencia e Innovacion-Agencia Estatal de Investigacion (PID2019-105844RB-I00/AEI/10.13039/501100011033) and MINECO for its help in the Laser Raman Microscope acquisition (UPOV08-3E-012) co -financed by the European Social Fund. Authors would also like to ex-press their gratitude for the financial support to the Generalitat Valenciana (GV/2021/011). Authors also thanks MINECO for MAT2017-84118-C2-1-R MCIN/AEI/10.13039/501100011033/project and FEDER Una manera de hacer Europa.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Vanadium Supported on Alumina and/or Zirconia Catalysts for the Selective Transformation of Ethane and Methanol

  • Benomar, S.
  • Masso Ramírez, Amada
  • Solsona Espriu, Benjamin Eduardo
  • Isaadi, R.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Vanadium supported on pure (Al2O3, ZrO2) or mixed zirconia-alumina (with Al/(Al + Zr) ratio of 0.75 or 0.25) catalysts have been prepared by wet impregnation, using homemade prepared supports. The catalysts have been characterized and tested in the oxidative dehydrogenation (ODH) of ethane and in the methanol aerobic transformation. The catalytic performance strongly depends on the nature of the metal oxide support. Thus, activity decreases in the order: VOx/ZrO2 > VOx/(Al,Zr-oxides) > VOx/Al2O3. On the other hand, at low and medium ethane conversions, the selectivity to ethylene presents an opposite trend: VOx/Al2O3 > VOx/(Al,Zr-oxides) > VOx/ZrO2. The different selectivity to ethylene at high conversion is due to the lower/higher initial ethylene formation and to the extent of the ethylene decomposition. Interestingly, VOx/(Al,Zr-oxides) with low Zr-loading present the lowest ethylene decomposition. The catalytic results obtained mainly depend on the nature of the supports whereas the role of the dispersion of vanadium species is unclear. In methanol oxidation, the catalysts tested present similar catalytic activity regardless of the support (Al2O3, ZrO2 or mixed Al2O3-ZrO2) but strong differences in the selectivity to the reaction products. Thus, dimethyl ether was mainly observed on alumina-supported vanadium oxide catalysts (which is associated to the presence of acidic sites on the surface of the catalyst, as determined by TPD-NH3). Formaldehyde was the main reaction product on catalysts supported on Zr-containing oxides (which can be related to a low presence of acid sites). In this article, the importance of the presence of acid sites in ethane ODH, which can be estimated using the methanol transformation reaction, is also discussed., The authors would like to acknowledge the DGICYT (CTQ2015-68951-C3-1-R and MAT2017-84118-C2-1-R projects), the Secretary of State for International Cooperation in Spain (Project AP/040992/11) and FEDER for financial support. B.S. also thanks the University of Valencia (UV-INV-AE16-484416).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The nickel-support interaction as determining factor of the selectivity to ethylene in the oxidative dehydrogenation of ethane over nickel oxide/alumina catalysts

  • Abdelbaki, Yousra
  • De Arriba-Mateos, Agustín
  • Solsona Espriu, Benjamin Eduardo
  • Delgado Muñoz, Daniel
  • Garcia-Gonzalez, Ester
  • Issaadi, Rachid
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Nickel oxides supported on gamma-alumina (Ni-loading from 5 to 30 wt% NiO) have been synthesized and tested in the oxidative dehydrogenation (ODH) of ethane in order to determine the importance of the NiO-support interaction. The best performance was achieved by the catalyst with 15 wt% NiO; higher NiO-loadings lead to the formation of unselective bulk-like NiO and lower Ni-loadings present high proportion of free alumina surface sites. The presence of oxalic acid and/or niobium in the synthesis gel resulted in the formation of NiO particles with similar size, but higher crystallinity and reducibility than the standard 15 wt% NiO catalyst. The obtained results have revealed that, in addition to NiO crystal size, the nickel oxide-support interaction determines the catalytic performance of these catalysts., Authors would like to acknowledge the Ministerio de Ciencia, Innovacion y Universidades in Spain through projects CRTl2018-099668-B-C21, MAT2017-84118-C2-1-R and PID2019-106662RB-C44 and Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships. A.A. acknowl-edges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329) . EGG acknowledges Dr. E. Urones for the valuable assistance in the use of electron microscopy facilities as well as to the CNME (Spain) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of Zn(NO3)2 concentration during the ZnO electrodeposition on TiO2 nanosponges used in photoelectrochemical applications

  • Navarro-Gázquez, Pedro José
  • Solsona-Espriu, Benjamín
  • Fernández-Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Garcia-Anton, Jose
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Muñoz-Portero, María-José|||0000-0002-7407-2598
[EN] TiO2/ZnO hybrid nanostructures were formed by electrochemical anodization of titanium and subsequently ZnO electrodeposition. Different Zn(NO3)(2) concentrations were used for electrodeposition (10-60 mM). A structural, morphological, and compositional characterisation was performed using FE-SEM, TEM, AFM, XRD, UV-Visible spectroscopy, and band gap measurements. It was reported that the morphology of the nanostructures changed with the Zn(NO3)2 concentration. Nanosponges were observed for concentrations from 10 mM to 30 mM whereas at 40 mM the morphology changed to well-defined ZnO hexagonal nanorods. At 50 mM a surface covered by ZnO with undefined rods could be seen and, at 60 mM, a morphology of nanoplatelets was observed. Besides, as Zn (NO3)2 concentration increased, the ZnO amount, the roughness, and the ZnO crystalline size also increased, while the band gap decreased. Electrochemical characterisation of nanostructures was performed by water splitting, stability to photocorrosion, EIS, and Mott-Schottky tests. The optimal samples were TiO2/ZnO hybrid nanostructures electrodeposited with 30 mM Zn(NO3)(2), since they were stable against photocorrosion and, compared to TiO2 nanosponges, showed an increase in photoelectrochemical activity of 204%, a lower resistance to charge transfer, and a higher donor density. Overall, the most efficient samples presented an intermediate Znloading because of a maximization of the TiO2-ZnO interaction and the prevention of the formation of non interacting ZnO structures., The authors would like to thank the financial support to the "Agencia Estatal de Investigacion" (PID2019-105844RB-I00/MCIN/AEI/10.13039/501100011033) and the co-finance by the "European Social Fund". The authors also thank the "Generalitat Valenciana" for its help in the Atomic Force Microscope acquisition (IDIFEDER/2018/044). Pedro Jose Navarro Gazquez wants to show his gratitude for the GRANT PEJ2018-003596-A-AR funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future". Authors from UV also thank MINECO (MAT2017-84118-C2-1-R project) and FEDER for funding. SCSIE from UV is also acknowledged for TEM and XRD measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The role of promoters on the catalytic performance of MxV2O5 bronzes for the selective partial oxidation of H2S

  • Ruiz-Rodríguez, Lidia
  • Vidal Moya, José Alejandro
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • De Arriba-Mateos, Agustín
  • Rodríguez-Castellón, Enrique
[EN] Metal-containing vanadium oxide bronzes (MxV2O5; M= Cu, Ag and Ca) have been prepared, characterized (before and after reaction) by various physicochemical techniques, and tested in the partial oxidation of H2S. The catalysts were prepared hydrothermally at 175 ¿C (from gels containing M/V molar ratios of 0.17 or 0.33) and heat-treated at 500 ¿C/2 h in N2. The most effective catalysts, showing a sulfur selectivity greater than 95 % for a H2S conversion beyond 90 %, were those presenting vanadium oxide bronze (ß-Cu0.261V2O5 or Ag0.333V2O5) as the main crystalline phase. Cu- and Ag-containing vanadium oxide bronzes were stable under reaction conditions. For calcium containing materials (mainly presenting the Ca0.17V2O5 bronze phase), the formation of CaSO4 has been observed during the reaction, which resulted in a negative effect on both activity and selectivity. The nature of active and selective sites in this type of catalysts, as well as the role of promoters, are also discussed., The authors would like to acknowledge the Ministerio de Ciencia e Innovacion of Spain (TED2021-130756B-C31, TED2021-130756B-C32 and MAT2017-84118-C2-1-R projects) . Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329) and Dr. Ferran Sabate from ITQ for his assistance with the EPR data treatment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of the performance of bulk NiO catalyst in the oxidative dehydrogenation of ethane by tuning the synthesis parameters

  • Abdelbaki, Yousra
  • De Arriba-Mateos, Agustín
  • Issaadi, Rachid
  • Sánchez Tovar, Rita
  • Solsona, Benjamín
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Highly stable and selective bulk NiO catalysts have been synthesized for the oxidative dehydrogenation (ODH) of ethane to ethylene. Interestingly, by optimizing synthesis parameters such as the amount of oxalic acid in the synthesis gel and the calcination temperature, undoped NiO catalysts have shown a consistent selectivity to ethylene of ca. 75%. The optimal catalyst requires the presence of a certain amount of oxalic acid in the synthesis gel and a final calcination at low temperatures (i.e. 350 ¿C). These catalysts have been deeply characterized by means of XRD, TPR, HRTEM, Raman and UV¿vis diffuse reflectance spectroscopies, XPS and Electrochemical Impedance Spectroscopy measurements and tested in the ethane ODH. A novel electrochemical study has been undertaken, showing the p-character of all the NiO catalysts synthesized but differing in their capacitance values and density of cationic vacancies. The catalytic performance of NiO catalysts has been explained in terms of the different physicochemical properties (including changes in the number of vacancies) of the samples and the isolation of electrophilic oxygen species., Authors would like to acknowledge the Ministerio de Ciencia, Innovacion y Universidades in Spain through projects CRTl2018099668-B-C21 and MAT2017-84118-C2-1-R. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329). Y.A. and R.I. thank the Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ferric sludge derived from the process of water purification as an efficient catalyst and/or support for the removal of volatile organic compounds

  • Sanchis, Rut
  • Dejoz, Ana
  • Vázquez, Isabel
  • Vilarrasa-García, Enrique
  • Jiménez-Jiménez, José
  • Rodríguez-Castellón, Enrique
  • Solsona, Benjamín
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Ferric chloride solutions are used as coagulants or flocculants in water treatment operations for human consumption. This treatment produces large amounts of clay-type solids formed mainly of montmorillonite with iron oxides and humic substances. This ferric sludge can be used as an efficient catalyst for the removal of volatile organic compounds (VOCs) by total oxidation. This waste isolated in the purification process has been activated by calcinations in air, characterized by several physicochemical techniques and employed as a catalyst for the removal by total oxidation of representative VOCs: toluene, propane and mixtures of toluene/propane with or without water. This ferric sludge has shown a catalytic activity one order of magnitude higher than that of a commercial iron oxide. This high activity has been related to the composition of the sludge (as it contains active metal oxides such as oxides of iron and manganese) and to the porous structure (leading to a reasonably high surface area). Moreover, it can be also used as a support for platinum, showing comparable (or even higher) catalytic activity than a similar platinum catalyst supported on conventional gamma-alumina., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R and CTQ2015-68951-C3-3-R. Authors from UV thank the University of Valencia (UV-INV-AE16-484416 project) and MINECO (MAT2017-84118-C2-1-R project) for funding. Finally, authors thank the Electron Microscopy Service of SCSIE of Universitat de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cu-Ga3+-doped wurtzite ZnO interface as driving force for enhanced methanol production in co-precipitated Cu/ZnO/Ga2O3 catalysts

  • Cored, Jorge
  • Wittee, Christian
  • Liu, Lichen
  • Agostini, Giovanni
  • Solsona, Benjamin
  • Sánchez-Tovar, Rita
  • Soriano-Rodríguez, José
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] A detailed understanding of the interactions among the active components in gallium promoted Cu/ZnO catalysts, depending on the speciation of the gallium, are reported using in situ/operando spectroscopic studies, and their effect in the CO2 hydrogenation to methanol unraveled. In this contribution, the promoting effect of Ga3+-doped in the wurtzite ZnO lattice of a Cu/ZnO/Ga2O3 catalyst is compared to that of a zinc gallate (ZnGa2O4) phase. Remarkably, a strong inhibition of CO formation, together with an enhanced methanol formation, are observed in the Ga3+-doped ZnO sample, specifically at conditions where the competitive reverse water gas shift reaction predominates. The catalytic performance has been correlated with the microstructure of the catalyst where a surface enrichment with reduced ZnOx species, together with the stabilization of positive charged copper species and an increase in the amount of surface basic sites for CO2 adsorption are observed on the most selective sample, The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through ``Severo Ochoa"Excellence Programme (SEV-2016-0683) and through RTI2018-099668-B-C21 project. The authors thank the Microscopy Service of UPV for kind help on measurements. J. C. thanks the Spanish Government (MINECO) for a ``Severo Ochoa" grant (BES-2015-075748). C.W.L. (Science without Borders-Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship. Authors from UV acknowledge the Spanish Ministry of Science, Innovation and Universities through the project MAT201784118-C2-1-R. Authors thank to the support of HZB/Bessy II (ISISS beamline) and ALBA Synchrotron (BL22-CLAESS) staff for the successful performance of the measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Support effects on NiO-based catalysts for the oxidative dehydrogenation (ODH) of ethane

  • Delgado-Muñoz, Daniel
  • Sanchís, R.
  • Cecilia, J. A.
  • Rodríguez-Castellón, E.
  • Caballero, A.
  • Solsona, B.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] We report on the effect of NiO-support interactions on the chemical nature of Ni species in a series of supported NiO catalysts for the ODH of ethane. SiO2, TiO2-anatase, a high surface area TiO2 and a porous clay hetero-structure (PCH) with TiO2 and SiO2 pillars were used as supports, which led to a selectivity to ethylene in the range 30-90% over supported NiO catalysts. The catalysts were characterized by means of XRD, N-2-Adsorption, H-2-TPR, XPS and in situ (under H-2 reductive atmosphere) and ex situ XAS spectroscopy. The catalytic performance of supported materials is discussed in terms of their reducibility and specific reduction kinetics, but also taking into account the specific chemical nature of Ni species on each catalyst. The influence of the particle size and the presence of Ni and O vacancies on the catalytic performance in the ODH of ethane is inferred., Authors would like to thank the DGICYT in Spain CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R, CTQ2012-37925-C03-2 and ENE2017-88818-C2-1-R. Also authors want to acknowledge the ALBA Synchrotron Light Source (Project ID: 2015021258 at CLAESS beamline). Authors from ITQ thank Project SEV-2016-0683 for financial support. D. D. also thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). Authors from UV thank the University of Valencia (UV-INV-AE16-484416 project) and MINECO (MAT2017-84118-C2-1-R project) for funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the Nature of the Promoter in NiO Catalysts on the Selectivity to Olefin During the Oxidative Dehydrogenation of Propane and Ethane

  • Delgado Muñoz, Daniel
  • Sanchis, Rut
  • Solsona Espriu, Benjamin Eduardo
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A comparative study of the catalytic properties for the oxidation of C2-C3 alkanes and olefins has been carried out over unpromoted and M-promoted NiO catalysts (Me¿=¿K, La, Ce, al, Zr, Sn, Nb). The catalysts have been characterized by several physico-chemical techniques (UV Raman, Visible Raman, FTIR of adsorbed CO and XPS). The characteristics of promoter elements are of paramount importance, since they are able to modify both the nature of the active nickel and the concentration of electrophilic O2¿/O¿ oxygen species. Thus, a relatively high acidity and valence of the promoter oxide (with oxidation state higher than¿+¿3) are necessary to achieve high selectivity to olefins during the oxidative dehydrogenation (ODH) of C2¿C3 alkanes. In addition, an inverse correlation between the selectivity to the corresponding olefin and the concentration of electrophilic oxygen species has been observed, although the selectivity to propene during propane ODH is lower than the selectivity to ethylene achieved during ethane ODH. On the other hand, a very low influence of alkane conversion on the selectivity to the corresponding olefins is observed. This behaviour can be explained by considering that the reaction rate for olefin combustion is lower than the reaction rate for alkane oxidation. However, the comparative study of the oxidation of alkanes and olefins suggest that the differences observed between the ODH of propane and ethane are not related to the reactivity of olefins, but to the different number and reactivity of C¿H bonds in both alkanes. A discussion on the importance of the concentration of active sites and the characteristics of the alkanes fed on the selectivity to olefin during the alkane ODH is also presented., The authors would like to acknowledge the Ministerio de Ciencia, Innovacion y Universidades of Spain (RTl2018-099668-B-C21 and MAT2017-84118-C2-1-R projects) and FEDER. Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tungsten-titanium mixed oxide bronzes: Synthesis, characterization and catalytic behavior in methanol transformation

  • Delgado-Muñoz, Daniel
  • Solsona Espriu, Benjamín Eduardo
  • Zamora Blanco, Segundo
  • Agouram, Said
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Tungsten oxide bronze-based materials show extremely adaptive structural and compositional features that make them suitable for functional properties modulation. Herein we report the preparation of a series of Ti-containing tungsten oxide catalysts presenting a hexagonal tungsten bronze-type structure. The insertion of Ti4+ within the structure (likely in the octahedral framework of the hexagonal tungsten bronze) leads to an increase in the number of strong acid sites, and the disappearance of W5+ surface species found in the undoped tungsten oxide. With the aim of studying the acid-redox properties of the titled catalysts, the catalytic transformation of methanol has been carried out in the presence and the absence of O-2 in the feed. Both catalytic activity and the acid-redox properties of these catalysts are highly dependent on catalyst composition and reaction conditions applied (i.e. in the presence or in the absence O-2 in the feed). Aerobic experiments show the depletion of the redox functionality (i.e. no formaldehyde detected in the products) when Ti4+ is incorporated in the framework (i.e. 100% selectivity to dimethyl ether). On the other hand, all the catalysts show the loss of the redox function and a decrease in the catalytic activity when anaerobic conditions are used. In the absence of oxygen, the catalysts are still active in the dehydration of methanol to dimethyl ether, i.e. they maintain their acid functionality even when oxygen is not present in the feed. The results are discussed in terms of the available surface active sites present in each case., Authors would like to thank DGICYT in Spain for RTI2018-099668-B-C21, CTQ2015-68951-C3-1-R and MAT2017-84118-C2-1-R projects. Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). Finally, authors thank the Electron Microscopy Service of SCSIE of Universitat de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Te-doped MoV-Oxide (M1 phase) for ethane ODH. The role of tellurium on morphology, thermal stability and catalytic behaviour

  • De Arriba-Mateos, Agustín
  • Solsona, Benjamin
  • Garcia-Gonzalez, Ester
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Undoped and Te-doped MoV-Oxide (M1 phase) catalysts have been prepared hydrothermally (Te/Mo ratio in the synthesis gel from 0 to 0.17; and heat-treated at 400 or 600ºC in N2 atmosphere), characterized by several physicochemical techniques and tested in the oxidative dehydrogenation (ODH) of ethane. The morphology and microporosity of the catalysts, the nature of V-species on the catalyst surface and the catalytic performance strongly depend on the composition and the heat-treatment temperature. When calcined at 400ºC, the selectivity to ethylene decreases when the amount of tellurium increases, whereas when heat treated at 600ºC, the selectivity to ethylene increases when the Te-loading increases. These trends have been explained on the basis of the good correlation between selectivity to ethylene and the concentration of V4+ species on the surface of catalysts, in which the most selective catalyst is that prepared with a Te/Mo ratio of 0.17 and heat-treated at 600ºC., The authors would like to thank the Spanish Ministry of Economy and Competitiveness for funding the projects (MINECO/FEDER) : CRTl2018-099668-B-C21, PID2019-106662RBC44, MAT2017-84118- C2-1-R and SEV-2016-0683. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329) . Authors would also like to acknowledge the "A -Team" of the ITQ (Dr. Miguel Palomino, Dr. Susana Valencia and Prof. Fernando Rey) for their assistance in the performance of the adsorption experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxidative dehydrogenation of ethane on diluted or promoted nickel oxide catalysts: Influence of the promoter/diluter

  • Delgado, D.
  • Solsona, B.
  • Sanchis, R.
  • Rodríguez-Castellón, E.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Ti- and Nb- containing NiO catalysts have been synthesized by two different preparation methods: i) by precipitation (Me-Ni-O oxides, Me = Nb or Ti), in order to prepare promoted NiO catalysts; and ii) by wet impregnation on TiO2 or NbOx supports, in order to prepare diluted/supported NiO catalysts. The catalysts have been also characterized and tested in the oxidative dehydrogenation of ethane. The catalytic performance of Ti- and Nb-promoted catalysts strongly depends on the composition, although in both cases the optimal one is found at similar Ti or Nb loadings (ca. 90 wt% NiO), showing similar ethylene selectivity in the ODH of ethane (ca. 90% at 10¿20% ethane conversion). However, in the case of diluted catalysts, the catalytic behavior of Ti- and Nb- containing catalysts is drastically different. Then, over TiO2-diluted NiO catalyst, the highest selectivity to ethylene (ca. 90% selectivity) is achieved at NiO loading of 20 wt.%. However, over Nb2O5-diluted NiO catalyst, selectivity to ethylene was lower than 70%. A discussion on the characteristics of selective catalysts is done. In this case, the best catalysts must present a low concentration of free NiO and TiO2 or Nb2O5 phases, maximizing the Ni-O-Ti or Ni-O-Nb interaction. Interestingly, this takes place at different NiO loading depending on the preparation method and the nature of promoted/diluter. The low selectivity to ethylene achieved by NiO diluted with Nb2O5 has been related to the low interaction of NiO with the surface of Nb2O5, which hinders the elimination of unselective electrophilic O- species., The authors would like to acknowledge the DGICYT in Spain (CRTl2018-099668-B-C21 and RTl2018-099668-B-C22 and MAT2017-84118-C2-1-R projects). Authors from ITQ also thank Project SEV-20160683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Photoelectrochemical study of ZnO nanowires [Dataset]

  • Batista Grau, Patricia
  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
  • Solsona Espriu, Benjamin Eduardo
  • Garcia-Anton, Jose|||0000-0002-0289-1324
ZnO nanowires with high aspect ratio were obtained by fast and simple electrochemical anodization. Morphological and photoelectrochemical characteristics of the synthesized ZnO nanowires were evaluated by using different techniques: high resolution transmission electron microscopy, X-ray photoelectron spectroscopy, UV–VIS spectroscopy and Mott-Schottky analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Partial oxidation of methane and methanol on FeOx-, MoOx- and FeMoOx-SiO2 catalysts prepared by sol-gel method: A comparative study

  • Cortés Ortiz, William G.
  • Delgado-Muñoz, Daniel
  • Guerrero Fajardo, Carlos Alberto
  • Agouram, Said
  • Sanchís, Ruth
  • Solsona, Benjamín
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] FeOx-, MoOx and FeMoOx-SiO2 materials prepared by a sol-gel procedure have been evaluated as catalysts for the partial oxidation of methane and methanol. The effect of decreasing the pH of the synthesis gel on the chemical nature of FeOx and MoOx species has been investigated. Characterization results show that low pH improves the dispersion of metal oxide species present in SiO2 matrix. For FeOx/SiO2 materials, the presence of dispersed FeOx species (rather than bulk Fe2O3) improves the selectivity to formaldehyde in the partial oxidation of methane and methanol. For FeMoOx/SiOx catalysts, dispersed species favor the selectivity to formaldehyde only for methane oxidation. In contrast, for bimetallic FeMoOx/SiOx system, a better dispersion does not improve the selectivity to the aldehyde in methanol oxidation. In spite of the fact that the activation temperature for methane oxidation is remarkably higher than that for methanol oxidation, catalytic results show that the most active and selective catalysts for the partial oxidation of methane are also the most effective materials for the partial oxidation of methanol., The authors would like to acknowledge the MINECO in Spain (CRTl2018-099668-B-C21 and MAT2017-84118-C2-1-R projects) and Universidad Nacional de Colombia and Colciencias in Colombia for funding projects. Authors are grateful to the SCSIE, University of Valencia, for providing HR-TEM facility.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced NiO Dispersion on a High Surface Area Pillared Heterostructure Covered by Niobium Leads to Optimal Behaviour in the Oxidative Dehydrogenation of Ethane

  • Rodríguez-Castellón, Enrique
  • Delgado-Muñoz, Daniel
  • Dejoz, Ana
  • Vázquez, Isabel
  • Agouram, Said
  • Cecilia, Juan A.
  • Solsona, Benjamín
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A Nb-containing siliceous porous clay heterostructure (PCH) with Nb contents from 0 to 30 wt %) was prepared from a bentonite and used as support in the preparation of supported NiO catalysts with NiO loading from 15 to 80 wt %. Supports and NiO-containing catalysts were characterised by several physicochemical techniques and tested in the oxidative dehydrogenation (ODH) of ethane. The characterisation studies on Nb-containing supports showed the presence of well-anchored Nb(5+)species without the formation of Nb(2)O(5)crystals. High dispersion of nickel oxide with low crystallinity was observed for the Nb-containing PCH supports. In addition, when NiO is supported on these Nb-containing porous clays, it is more effective in the ODH of ethane (ethylene selectivity of ca. 90 %) than NiO supported on the corresponding Nb-free siliceous PCH or on Nb2O5(ethylene selectivities of ca. 30 and 60 %, respectively). Factors such as the NiO-Nb(5+)interaction, the NiO particle size and the properties of surface Ni(n+)species were shown to determine the catalytic performance., The authors would like to acknowledge the Ministerio de Ciencia, Innovacion y Universidades of Spain (CRTl2018-099668-B-C21, RTl2018-099668-B-C22 and MAT2017-84118-C2-1-R projects). Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Eco-friendly cavity-containing iron oxides prepared by mild routes as very efficient catalysts for the total oxidation of VOCs

  • Sanchis, Rut
  • Alonso-Domínguez, Daniel
  • Dejoz, Ana
  • Pico, María Pilar
  • Álvarez-Serrano, Inmaculada
  • García Martínez, Tomás
  • López, María Luisa
  • Solsona, Benjamín
Iron oxides (FeOx) are non-toxic, non-expensive and environmentally friendly compounds, which makes them good candidates for many industrial applications, among them catalysis. In the present article five catalysts based on FeOx were synthesized by mild routes: hydrothermal in subcritical and supercritical conditions (Fe-HT, Few200, Few450) and solvothermal (Fe-ST1 and Fe-ST2). The catalytic activity of these catalysts was studied for the total oxidation of toluene using very demanding conditions with high space velocities and including water and CO2 in the feed. The samples were characterized by X-ray diffraction (XRD), scanning and high-resolution transmission electron microscopy (SEM and HRTEM), X-ray photoelectron spectroscopy (XPS) and nitrogen adsorption-desorption isotherms. It was observed that the most active catalyst was a cavity-containing porous sample prepared by a solvothermal method with a relatively high surface area (55 m2 g−1) and constituted by flower-like aggregates with open cavities at the catalyst surface. This catalyst displayed superior performance (100% of toluene conversion at 325 °C using highly demanding conditions) and this performance can be maintained for several catalytic cycles. Interestingly, the porous iron oxides present not only a higher catalytic activity than the non-porous but also a higher specific activity per surface area. The high activity of this catalyst has been related to the possible synergistic effect of compositional, structural and microstructural features emphasizing the role of the surface area, the crystalline phase present, and the properties of the surface., Authors from UV thank the University of Valencia (UV-INV-AE16-484416 project) and MINECO (MAT2017-84118-C2-1-R project) for funding. Authors from UCM thank Santander-UCM institution (PR41/17-20951 project) and MINECO (MAT2017-84118-C2-2-R project) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Size-activity relationship of iridium particles supported on silica for the total oxidation of volatile organic compounds (VOCs)

  • Schick, Lukas
  • Sanchis, Rut
  • González-Alfaro, Vicenta
  • Agouram, Saïd
  • López Sebastián, José Manuel
  • Torrente-Murciano, Laura
  • García Martínez, Tomás
  • Solsona, Benjamín
12 Figures, 2 Tables.-- Datos suplementarios disponibles en línea en la página web del editor.-- © 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, This systematic catalytic study reveals for the first time a strong size-activity relationship of iridium-based catalysts for the total oxidation of short chain alkanes reaction. Silica has been selected as support for its inertness and weak silica-iridium interaction to avoid its contribution to the catalytic activity. The size of the iridium particles can be increased from ∼5 to 27 nm by increasing the calcination temperature from 350 to 750 °C. Unlike other precious metals such as palladium or platinum, in the case of iridium catalysts, the oxidation activity increases when the size decreases. This effect is also maintained when the activity is normalized per metallic surface area revealing a higher intrinsic activity as the iridium size decreases beyond its simple increase in metallic surface area. Indeed, as the particle size decreases, a higher proportion of highly reducible iridium species as well as an increase in defective Ir3+ species on the surface is observed by XPS, directly related to the enhanced activity. The highly reducible species are oxidized under the reaction conditions, leading to an initial decrease in activity before reaching a stable rate of oxidation reaction. This knowledge provides useful guidelines for the design of iridium-based systems for the total oxidation of volatile organic compounds at low temperatures., Authors from UV thank the University of Valencia (UV-INV-AE16-484416 project) and MINECO (MAT2017-84118-C2-1-R project) for funding. Mathias Van de Vyver is acknowledged for the Raman study. T.G. would also like to thank the Regional Government of Aragón (DGA) for the support provided under the research groups support programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The key role of nanocasting in gold‐based Fe2O3 nanocasted catalysts for oxygen activation at the metal‐support interface

  • García Martínez, Tomás
  • López Sebastián, José Manuel
  • Solsona, Benjamín
  • Sanchis, Rut
  • Willock, David J.
  • Davies, Thomas E.
  • Lu, Li
  • He, Quian
  • Kiely, Christopher J.
  • Taylor, Stuart H.
5 Tablas.- 10 Figuras.- This is the peer reviewed version of the following article: The key role of nanocasting in gold‐based Fe2O3 nanocasted catalysts for oxygen activation at the metal‐support interface, ChemCatChem 11: 1915-1927 (2019), which has been published in final form at http://dx.doi.org/10.1002/cctc.201900210. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions., The total oxidation of propane, a representative Volatile Organic Compound, has been studied using gold‐based α‐Fe2O3 catalysts. Catalysts consisting of gold nanoparticles confined in nanostructured Fe2O3 prepared by a nanocasting route present the highest catalytic activity for propane total oxidation, and the activity is significantly greater than those of gold‐based catalysts where iron oxide supports are prepared by other conventional methods, such as calcination. Detailed characterisation and Density‐functional theory (DFT) studies have been undertaken in order to explain the enhancement in catalytic properties. The presence of confined gold nanoparticles on the nanocast Fe2O3 facilitates the production of highly reactive oxygen vacancies at the metal‐support interface, increasing the catalyst performance. Both the development of a microporous/mesoporous structure in the iron oxide support and the presence of a mixed surface phase of Si and Fe oxides, seem to be key parameters, being both features inherent in the nanocasting process from silica templates. Additionally, the catalytic activity is enhanced due to other positive effects, which are closely related to the nanocasting preparation method: i) a higher contact surface area between partially confined small gold nanoparticles in the internal mesoporosity of the nanostructured support and the metal oxide and; ii) a more reducible support due to the presence of more active surface lattice oxygen., T. García would like to acknowledge the Spanish Ministry of Education, Culture and Sports through its Mobility program for stays of senior researchers and professors in foreign countries (MECD, grant number PRX15/00144) for funding. Computational facilities supplied by Wales’ national supercomputing service provider, High‐Performance Computing (HPC) Wales, are gratefully acknowledged. Via our membership of the UK's HPC Materials Chemistry Consortium, which is funded by EPSRC (EP/L000202), this work made use of the facilities of HECToR and ARCHER, the UK's national high‐performance computing service, which is funded by the Office of Science and Technology through EPSRC's High End Computing Programme. CJK gratefully acknowledges funding from the National Science Foundation Major Research Instrumentation program (GR# MRI/DMR‐1040229). Authors from UV thank the University of Valencia (UV‐INV‐AE16‐484416 project) and MINECO (MAT2017‐84118‐C2‐1‐R project) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photocatalytic activity of mesoporous α-Fe2O3 synthesized via soft chemistry and hard template methods for degradation of Azo Dye Orange II

  • Domingo, Emma
  • Beltrán, Alicia
  • Sanchis, Rut
  • García Martínez, Tomás
  • Solsona, Benjamín
  • Galindo, Francisco
4 Figuras.- 1 Tabla, The photocatalytic activities of two samples of α-Fe2O3 nanoparticles have been evaluated. One sample has been synthesized by a precipitation method with oxalic acid (soft method), and the other sample has been produced with the aid of a hard template (nanocasting with silica). The photodegradation of azo dye Orange II (OII), a model water pollutant, has been used as a benchmark reaction. It has been found that the synthetic method has a deep effect on the photocatalytic activity of the tested hematites, since sample created with the soft method is notably more photoactive than the one made with nanocasting procedure (k = 8.9 × 10− 3 min−1 vs. k = 1.6 × 10−3 min−1 respectively) when irradiated with UV light. Similar higher activity of the soft method sample has been found when visible light was used as excitation source (k = 8.3 × 10−3 min−1 vs. k = 0.4 × 10−3 min−1 respectively). The enhanced surface adsorption of OII on the sample prepared via the soft methodology, which is ten times higher than the adsorption on sample prepared via the nanocasting path, could explain the better photocatalytic performance of the former material., Spanish Ministerio de Economía y Competitividad (CTQ2015-71004-R, MAT2017-84118-C2-1-R) and Universitat Jaume I (grant P1.1B2015-76) are acknowledged for financial support. We also thank the University of Valencia for funding (UV-INV-AE-16-484416)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Easy method for the transformation of levulinic acid into gamma-valerolactone using a nickel catalyst derived from nanocasted nickel oxide

  • Sanchis, Rut
  • García Martínez, Tomás
  • Dejoz, Ana
  • Vázquez, Isabel
  • Llopis, Francisco J.
  • Solsona, Benjamín
Different nickel catalysts have been tested for the transformation of levulinic acid into γ-valerolactone using an easy hydrothermal method, taking advantage of the properties of the high temperature water. A metallic nickel catalyst derived from NiO synthesized by a nanocasting procedure can achieve a productivity to γ-valerolactone, which is two orders of magnitude higher than that obtained by a commercial nickel catalyst. This nanocasted metallic nickel catalyst has shown bifunctionality as it is capable of activating water as the source for hydrogen and undertaking the further hydrogenation step. In contrast with metallic nickel, nickel oxide has shown to be incapable of transforming levulinic acid into γ-valerolactone., Authors from UV thank the University of Valencia (UV-INV-AE16-484416 project) and MINECO(MAT2017-84118-C2-1-R project) for funding, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tungsten-titanium mixed oxide bronzes: Synthesis, characterization and catalytic behavior in methanol transformation

  • Delgado Muñoz, Daniel
  • Soriano, M.D.
  • Solsona Espriú, Benjamín
  • Zamora Iranzo, Samuel Andrés
  • Agouram, Saïd
  • Concepción, Patricia
  • López Nieto, José Manuel
Tungsten oxide bronze-based materials show extremely adaptive structural and compositional features that make them suitable for functional properties modulation. Herein we report the preparation of a series of Ti-containing tungsten oxide catalysts presenting a hexagonal tungsten bronze-type structure. The insertion of Ti within the structure (likely in the octahedral framework of the hexagonal tungsten bronze) leads to an increase in the number of strong acid sites, and the disappearance of W surface species found in the undoped tungsten oxide. With the aim of studying the acid-redox properties of the titled catalysts, the catalytic transformation of methanol has been carried out in the presence and the absence of O in the feed. Both catalytic activity and the acid-redox properties of these catalysts are highly dependent on catalyst composition and reaction conditions applied (i.e. in the presence or in the absence O in the feed). Aerobic experiments show the depletion of the redox functionality (i.e. no formaldehyde detected in the products) when Ti is incorporated in the framework (i.e. 100% selectivity to dimethyl ether). On the other hand, all the catalysts show the loss of the redox function and a decrease in the catalytic activity when anaerobic conditions are used. In the absence of oxygen, the catalysts are still active in the dehydration of methanol to dimethyl ether, i.e. they maintain their acid functionality even when oxygen is not present in the feed. The results are discussed in terms of the available surface active sites present in each case., Authors would like to thank DGICYT in Spain for RTI2018-099668-B-C21, CTQ2015-68951-C3-1-R and MAT2017-84118-C2-1-R projects. Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). Finally, authors thank the Electron Microscopy Service of SCSIE of Universitat de València for their support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferric sludge derived from the process of water purification as an efficient catalyst and/or support for the removal of volatile organic compounds

  • Sanchis, Rut
  • Dejoz, Ana
  • Vázquez, Isabel
  • Vilarrasa-García, E.
  • Jiménez-Jiménez, José
  • Rodríguez-Castellón, Enrique
  • López Nieto, José Manuel
  • Solsona, Benjamín
Ferric chloride solutions are used as coagulants or flocculants in water treatment operations for human consumption. This treatment produces large amounts of clay-type solids formed mainly of montmorillonite with iron oxides and humic substances. This ferric sludge can be used as an efficient catalyst for the removal of volatile organic compounds (VOCs) by total oxidation. This waste isolated in the purification process has been activated by calcinations in air, characterized by several physicochemical techniques and employed as a catalyst for the removal by total oxidation of representative VOCs: toluene, propane and mixtures of toluene/propane with or without water. This ferric sludge has shown a catalytic activity one order of magnitude higher than that of a commercial iron oxide. This high activity has been related to the composition of the sludge (as it contains active metal oxides such as oxides of iron and manganese) and to the porous structure (leading to a reasonably high surface area). Moreover, it can be also used as a support for platinum, showing comparable (or even higher) catalytic activity than a similar platinum catalyst supported on conventional γ-alumina. This work presents a double environmental perspective since the material employed as a catalyst is a waste sludge and the catalytic reaction studied deals about the elimination of pollutants., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R and CTQ2015-68951-C3-3-R. Authors from UV thank the University of Valencia (UV-INV-AE16-484416 project) and MINECO (MAT2017-84118-C2-1-R project) for funding. Finally, authors thank the Electron Microscopy Service of SCSIE of Universitat de València for their support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxidative dehydrogenation of ethane on diluted or promoted nickel oxide catalysts: Influence of the promoter/diluter

  • Delgado Muñoz, Daniel
  • Solsona, Benjamín
  • Sanchis, Rut
  • Rodríguez, E.
  • López Nieto, José Manuel
Ti- and Nb- containing NiO catalysts have been synthesized by two different preparation methods: i) by precipitation (Me-Ni-O oxides, Me = Nb or Ti), in order to prepare promoted NiO catalysts; and ii) by wet impregnation on TiO or NbO supports, in order to prepare diluted/supported NiO catalysts. The catalysts have been also characterized and tested in the oxidative dehydrogenation of ethane. The catalytic performance of Ti- and Nb-promoted catalysts strongly depends on the composition, although in both cases the optimal one is found at similar Ti or Nb loadings (ca. 90 wt% NiO), showing similar ethylene selectivity in the ODH of ethane (ca. 90% at 10–20% ethane conversion). However, in the case of diluted catalysts, the catalytic behavior of Ti- and Nb-containing catalysts is drastically different. Then, over TiO-diluted NiO catalyst, the highest selectivity to ethylene (ca. 90% selectivity) is achieved at NiO loading of 20 wt.%. However, over NbO-diluted NiO catalyst, selectivity to ethylene was lower than 70%. A discussion on the characteristics of selective catalysts is done. In this case, the best catalysts must present a low concentration of free NiO and TiO or NbO phases, maximizing the Ni-O-Ti or Ni-O-Nb interaction. Interestingly, this takes place at different NiO loading depending on the preparation method and the nature of promoted/diluter. The low selectivity to ethylene achieved by NiO diluted with NbO has been related to the low interaction of NiO with the surface of NbO, which hinders the elimination of unselective electrophilic O species., The authors would like to acknowledge the DGICYT in Spain (CRTl2018-099668-B-C21 and RTl2018-099668-B-C22 and MAT2017-84118-C2-1-R projects). Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glycerol selective oxidation to lactic acid over AuPt nanoparticles; Enhancing reaction selectivity and understanding by support modification

  • Douthwaite, Mark
  • Powell, Natasha
  • Taylor, Aoife
  • Ford, Grayson
  • López Sebastián, José Manuel
  • Solsona, Benjamín
  • Yang, Nating
  • Sanahuja-Parejo, Olga
  • He, Quian
  • Morgan, David J.
  • García Martínez, Tomás
  • Taylor, Stuart H.
2 Schemes, 3 Tables, 5 Figures., A high surface area mesoporous TiO2 material (110 m2/g) was synthesised using a nanocasting methodology, utilizing SBA‐15 as a hard template. This material was subsequently used as a support to prepare a series of 1 wt.% AuPt/TiO2 catalysts, synthesised by conventional impregnation and sol‐immobilisation. Catalysts were tested for the oxidation of glycerol to lactic acid and their performance was compared with corresponding catalysts supported on TiO2−P25, TiO2‐anatase and TiO2‐rutile. Higher rates of reaction and higher selectivity to lactic acid were observed over nanocast TiO2 supported catalysts. The increased performance of these catalysts was attributed to the presence of Si on the surface of the support, which likely arose from inefficient etching of the SBA‐15 template. The presence of Si in these catalysts was confirmed by X‐ray photoelectron spectroscopy and electron energy loss spectroscopy. It was proposed that the residual Si present increases the Brønsted acidity of the TiO2 support, which can lead to the formation of Lewis acid sites under reaction conditions; both sites are known to catalyse the dehydration of a primary alcohol in glycerol. Typically, under alkaline conditions, lactic acid is formed by the nucleophilic abstraction of a hydrogen. Thus, we propose that the improved selectivity to lactic acid over the nanocast TiO2 supported catalyst is attributed to the co‐operation of heterogeneous and homogeneous dehydration reactions, as both compete directly with a direct oxidation pathway, which leads to the formation of oxidation products such as glyceric and tartronic acid., T. García would like to acknowledge the Spanish MICINN through its Mobility program for stays of senior researchers and professors in foreign countries (grant number PRX18/00474) for funding. O.S.P acknowledges the FPI fellowship (BES-2016-077750) funded by Spanish MINECO. B.S. also thank MINECO (MAT2017-84118-C2-1-R project) for funding. We would also like to thank the Cardiff University TEM facility for the TEM and FEG-SEM electron microscopy data acquired and Diamond Light Source for access and support in use of the electron Physical Science Imaging Centre (Instrument E01 and proposal number MG21641 and MG22766) which contributed to the results presented here., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low temperature conversion of levulinic acid into γ-valerolactone using Zn to generate hydrogen from water and nickel catalysts supported on sepiolite

  • García Moreno, Adrián
  • Sanchis, Rut
  • Miguel, P.J.
  • Dejoz, Ana
  • Pico, María Pilar
  • López, María Luisa
  • Álvarez-Serrano, Inmaculada
  • García Martínez, Tomás
  • Solsona, Benjamín
1 scheme, 2 tables, 7 figures.-- Supplementary material available., In the present article, gamma-valerolactone has been obtained from levulinic acid with a yield exceeding 25% using very mild conditions without feeding hydrogen (30 degrees C, atmospheric pressure, water as the hydrogen source). The overall reaction conducted is a two-step process: first, a redox reaction involving the oxidation of metallic Zn to ZnO for in situ hydrogen production through the water splitting reaction and, second, a catalytic reaction involving Ni-supported catalysts for the production of gamma-valerolactone from levulinic acid. Ni active sites have been supported on sepiolite, an abundant and cheap material. The nickel particle size has been demonstrated to be a parameter of paramount importance determining the catalytic activity, since the best catalytic performance is obtained with the smallest Ni nanoparticles. This combination of Zn and Ni supported on sepiolite shows a good catalytic stability after three catalytic runs., Authors from UCM thank MINECO (MAT2017-84118-C2-2-R project) and UCM CAI center of EM. Authors from UV thank MINECO (MAT2017-84118-C2-1-R project) and FEDER for funding. A. G. thanks MINECO for the pre-doctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into the production of upgraded biofuels using Mg-loaded mesoporous ZSM-5 zeolites

  • Sanahuja-Parejo, Olga
  • Veses Roda, Alberto
  • López Sebastián, José Manuel
  • Callén Romero, M. Soledad
  • Solsona, Benjamín
  • Richards, Nia
  • Taylor, Stuart H.
  • García Martínez, Tomás
9 figures, 6 tables.-- Supplementary information available.-- https://authorservices.wiley.com/author-resources/Journal-Authors/licensing/self-archiving.html, Bio‐oil catalytic upgrading has been performed using mesoporous Mg‐loaded ZSM‐5. The presence of Mg modifies both textural and acidic properties, which do not only depend on the Mg content (1 and 5 wt. %) but also on the Si/Al ratio of the parent zeolite (25 and 40). Mg impregnation over mesoporous acidic zeolites has been shown to be essential for further deoxygenation of the raw bio‐oil. Thus, remarkable deoxygenation rates have been achieved, exceeding 68 % for a 5 wt. % Mg‐loaded ZSM‐5 (Si/Al=25). For this catalyst, decarboxylation reactions at MgO active sites seem to be predominant, promoting the upgrading of phenols towards the formation of phenolic compounds with lower oxygen content. As in the case of acidic mesoporous ZSM‐5, the formation of aromatics for Mg‐loaded mesoporous ZSM‐5 samples could be mainly related to the promotion of decarbonylation reactions of phenolic compounds over Brønsted acidic sites at the external surface. Interestingly, the presence of strong Lewis acidic sites created by the interaction between (Mg2+OH−)+ species and extra framework alumina jointly with the remaining Brønsted acidic sites at the external surface could enhance the formation of aromatics through cascade reactions involving ketonization and further aldol condensation and dehydration reactions, The authors would like to thank MINECO and FEDER for financial support (Project ENE2015‐68320‐R and MAT2017‐84118‐C2‐1‐R). The authors want also to thank the support from the Regional Aragon Government (DGA) under the research groups support program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Supported iridium catalysts for the total oxidation of short chain alkanes and their mixtures: Influence of the support

  • Schick, Lukas
  • González-Alfaro, Vicenta
  • García Moreno, Adrián
  • López Sebastián, José Manuel
  • Morgan, David J.
  • Agouram, Saïd
  • Taylor, Stuart H.
  • García Martínez, Tomás
  • Solsona, Benjamín
13 figures, 3 tables.-- Supplementary information available.-- © 2020. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/, Catalytic total oxidation of noxious volatile organic compounds (VOCs) is an important process to remove these compounds from the atmosphere. This is the first systematic study of the influence of the support on the activity of iridium oxide supported catalysts for the total oxidation of VOCs. Iridium catalysts supported on titania, γ-alumina, silica and zeolites have been prepared using different calcination temperatures. The activity for the total oxidation of short chain alkanes and their mixtures has been evaluated and the physicochemical properties characterized by N2 adsorption, XRD, (HR)TEM, EDX, CO-Chemisorption, TPR, XPS and Raman spectroscopy. Both the calcination temperature and the nature of the support of iridium catalysts play an important role for the catalytic performance. Silica, ZSM-5 zeolites and titania are suitable supports for IrOx, in contrast with γ-alumina. A strong influence of the Lewis acidity of the support on the turnover frequency of the iridium oxide is found. Additionally, for a given support, the calcination temperature has an effect on the catalytic activity. A possible size effect is discussed. However, the major controlling factor is the nature of the support. Therefore, our results provide a guideline towards a rational design of more active IrOx catalysts for the total oxidation of VOCs., Authors from UV thank MINECO (MAT2017-84118-C2-1-R project) for funding. T.G. would also like to thank the Regional Government of Aragón (DGA) for the support provided under the research groups support programme. SCSIE from Universitat de València is acknowledged for the microscopy study. T.G. and J.M.L. would like to thank the Spanish Ministry of Science and Innovation, the State Research Agency and the European Funds for Regional Development through the project RTI2018-095575-BI00, MCI/AEI/FEDER, UE. A.G. thanks MINECO for the pre‐doctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Partial oxidation of methane and methanol on FeOx-, MoOx- and FeMoOx -SiO2 catalysts prepared by sol-gel method: A comparative study

  • Cortés Ortiz, W.G.
  • Delgado Muñoz, Daniel
  • Guerrero Fajardo, C.A.
  • Agouram, Saïd
  • Sanchis, Rut
  • Solsona, Benjamín
  • López Nieto, José Manuel
FeOx-, MoOx and FeMoOx-SiO materials prepared by a sol-gel procedure have been evaluated as catalysts for the partial oxidation of methane and methanol. The effect of decreasing the pH of the synthesis gel on the chemical nature of FeOx and MoOx species has been investigated. Characterization results show that low pH improves the dispersion of metal oxide species present in SiO matrix. For FeOx/SiO materials, the presence of dispersed FeOx species (rather than bulk FeO) improves the selectivity to formaldehyde in the partial oxidation of methane and methanol. For FeMoOx/SiOx catalysts, dispersed species favor the selectivity to formaldehyde only for methane oxidation. In contrast, for bimetallic FeMoOx/SiOx system, a better dispersion does not improve the selectivity to the aldehyde in methanol oxidation. In spite of the fact that the activation temperature for methane oxidation is remarkably higher than that for methanol oxidation, catalytic results show that the most active and selective catalysts for the partial oxidation of methane are also the most effective materials for the partial oxidation of methanol., The authors would like to acknowledge the MINECO in Spain (CRTl2018-099668-B-C21 and MAT2017-84118-C2-1-R projects) and Universidad Nacional de Colombia and Colciencias in Colombia for funding projects. Authors are grateful to the SCSIE, University of Valencia, for providing HR-TEM facility.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the Nature of the Promoter in NiO Catalysts on the Selectivity to Olefin During the Oxidative Dehydrogenation of Propane and Ethane

  • Delgado Muñoz, Daniel
  • Sanchis, Rut
  • Solsona, Benjamín
  • Concepción, Patricia
  • López Nieto, José Manuel
A comparative study of the catalytic properties for the oxidation of C-C alkanes and olefins has been carried out over unpromoted and M-promoted NiO catalysts (Me = K, La, Ce, al, Zr, Sn, Nb). The catalysts have been characterized by several physico-chemical techniques (UV Raman, Visible Raman, FTIR of adsorbed CO and XPS). The characteristics of promoter elements are of paramount importance, since they are able to modify both the nature of the active nickel and the concentration of electrophilic O/O oxygen species. Thus, a relatively high acidity and valence of the promoter oxide (with oxidation state higher than + 3) are necessary to achieve high selectivity to olefins during the oxidative dehydrogenation (ODH) of C–C alkanes. In addition, an inverse correlation between the selectivity to the corresponding olefin and the concentration of electrophilic oxygen species has been observed, although the selectivity to propene during propane ODH is lower than the selectivity to ethylene achieved during ethane ODH. On the other hand, a very low influence of alkane conversion on the selectivity to the corresponding olefins is observed. This behaviour can be explained by considering that the reaction rate for olefin combustion is lower than the reaction rate for alkane oxidation. However, the comparative study of the oxidation of alkanes and olefins suggest that the differences observed between the ODH of propane and ethane are not related to the reactivity of olefins, but to the different number and reactivity of C–H bonds in both alkanes. A discussion on the importance of the concentration of active sites and the characteristics of the alkanes fed on the selectivity to olefin during the alkane ODH is also presented., The authors would like to acknowledge the Ministerio de Ciencia, Innovación y Universidades of Spain (RTl2018- 099668-B-C21 and MAT2017-84118-C2-1-R projects) and FEDER. Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced NiO Dispersion on a High Surface Area Pillared Heterostructure Covered by Niobium Leads to Optimal Behaviour in the Oxidative Dehydrogenation of Ethane

  • Rodríguez-Castellón, Enrique
  • Delgado Muñoz, Daniel
  • Dejoz, Ana
  • Vázquez, Isabel
  • Agouram, Saïd
  • Cecilia, Juan Antonio
  • Solsona, Benjamín
  • López Nieto, José Manuel
A Nb-containing siliceous porous clay heterostructure (PCH) with Nb contents from 0 to 30 wt %) was prepared from a bentonite and used as support in the preparation of supported NiO catalysts with NiO loading from 15 to 80 wt %. Supports and NiO-containing catalysts were characterised by several physicochemical techniques and tested in the oxidative dehydrogenation (ODH) of ethane. The characterisation studies on Nb-containing supports showed the presence of well-anchored Nb species without the formation of NbO crystals. High dispersion of nickel oxide with low crystallinity was observed for the Nb-containing PCH supports. In addition, when NiO is supported on these Nb-containing porous clays, it is more effective in the ODH of ethane (ethylene selectivity of ca. 90 %) than NiO supported on the corresponding Nb-free siliceous PCH or on NbO (ethylene selectivities of ca. 30 and 60 %, respectively). Factors such as the NiO–Nb interaction, the NiO particle size and the properties of surface Ni species were shown to determine the catalytic performance., The authors would like to acknowledge the Ministerio de Ciencia, Innovación y Universidades of Spain (CRTl2018‐099668‐B‐C21, RTl2018‐099668‐B‐C22 and MAT2017‐84118‐C2‐1‐R projects). Authors from ITQ also thank Project SEV‐2016‐0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP‐2014‐068669).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gamma-valerolactone from levulinic acid and its esters: Substrate and reaction media determine the optimal catalyst, γ-valerolactone from levulinic acid and its esters: Substrate and reaction media determine the optimal catalyst

  • García Moreno, Adrián
  • Miguel, P.J.
  • Pico, María Pilar
  • Álvarez-Serrano, Inmaculada
  • López, María Luisa
  • García Martínez, Tomás
  • Solsona, Benjamín
13 figures, 7 tables.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0, Ni-based catalysts supported on sepiolite were synthesized by different preparation procedures for the production of γ-valerolactone from levulinic acid and its esters (methyl levulinate and ethyl levulinate). The optimal performance was related to the formation of tiny nickel particles. Interestingly, the reaction conditions significantly influence the reactivity of the substrates. The catalytic performance of the optimal Ni/sepiolite catalyst was compared with two catalysts of ruthenium (supported on γ-alumina or sepiolite). In all cases, the production of γ-valerolactone depends on both the substrate employed and the reaction media. Overall, the preferred reaction media using the Ni-catalyst is 2-propanol whereas pressurized hydrogen in water is the best alternative for Ru-catalysts. In both cases, a reasonable stability has been observed after 3 cycles. Finally, the use of metallic Zn in an aqueous medium to provide hydrogen could not be considered as an appropriate option due to the lack of a stable behaviour., Authors from UCM thank MINECO(MAT2017-84118-C2-2-R project) and UCM CAI center of EM. Authors from UV thank MINECO (MAT2017-84118-C2-1-R project) and FEDER for funding. A.G. thanks MINECO for the pre-doctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly active Co3O4-based catalysts for total oxidation of light C1-C3 alkanes prepared by a simple soft chemistry method: effect of the heat-treatment temperature and mixture of alkanes

  • Sanchis, Rut
  • García Moreno, Adrián
  • Ivars-Barceló, F.
  • Taylor, Stuart H.
  • García Martínez, Tomás
  • Dejoz, Ana
  • Vázquez, Isabel
  • Solsona, Benjamín
9 figures, 2 tables., In the present work, a simple soft chemistry method was employed to prepare cobalt mixed oxide (Co3O4) materials, which have shown remarkably high activity in the heterogeneously catalyzed total oxidation of low reactive VOCs such as the light alkanes propane, ethane, and methane. The optimal heat-treatment temperature of the catalysts was shown to depend on the reactivity of the alkane studied. The catalytic activity of the Co3O4 catalysts was found to be as high as that of the most effective catalysts based on noble metals. The physicochemical properties, from either the bulk (using XRD, TPR, TPD-O2, and TEM) or the surface (using XPS), of the catalysts were investigated to correlate the properties with the catalytic performance in the total oxidation of VOCs. The presence of S1 low-coordinated oxygen species at the near surface of the Co3O4-based catalysts appeared to be linked with the higher reducibility of the catalysts and, consequently, with the higher catalytic activity, not only per mass of catalyst but also per surface area (enhanced areal rate). The co-presence of propane and methane in the feed at low reaction temperatures did not negatively affect the propane reactivity. However, the co-presence of propane and methane in the feed at higher reaction temperatures negatively affected the methane reactivity., This research was funded by MINECO-Spain, grant number PRE2018-085211. This work was also funded by the MAT2017-84118-C2-1-R MCIN/AEI/10.13039/501100011033/ project and FEDER Una manera de hacer Europa. Comunidad de Madrid, grant number 2017-T1/IND-6025, within the program “Atracción y Retención de Talento Investigador” of the V PRICIT., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The nickel-support interaction as determining factor of the selectivity to ethylene in the oxidative dehydrogenation of ethane over nickel oxide/alumina catalysts

  • Abdelbaki, Yousra
  • de Arriba, Agustín
  • Solsona, Benjamín
  • Delgado, Daniel
  • García-González, Ester
  • Issaadi, Rachid
  • López Nieto, José Manuel
Nickel oxides supported on γ-alumina (Ni-loading from 5 to 30 wt% NiO) have been synthesized and tested in the oxidative dehydrogenation (ODH) of ethane in order to determine the importance of the NiO-support interaction. The best performance was achieved by the catalyst with 15 wt% NiO; higher NiO-loadings lead to the formation of unselective bulk-like NiO and lower Ni-loadings present high proportion of free alumina surface sites. The presence of oxalic acid and/or niobium in the synthesis gel resulted in the formation of NiO particles with similar size, but higher crystallinity and reducibility than the standard 15 wt% NiO catalyst. The obtained results have revealed that, in addition to NiO crystal size, the nickel oxide-support interaction determines the catalytic performance of these catalysts., Authors would like to acknowledge the Ministerio de Ciencia, Innovación y Universidades in Spain through projects CRTl2018-099668-B-C21, MAT2017-84118-C2-1-R and PID2019-106662RB-C44 and Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329). EGG acknowledges Dr. E. Urones for the valuable assistance in the use of electron microscopy facilities as well as to the CNME (Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evolution of the optimal catalytic systems for the oxidative dehydrogenation of ethane: The role of adsorption in the catalytic performance

  • de Arriba, Agustín
  • Solsona, Benjamín
  • Dejoz, Ana M.
  • Concepción, Patricia
  • Homs, Narcís
  • Ramírez de la Piscina, Pilar
  • López Nieto, José Manuel
Three samples that correspond to the evolution of optimal catalytic systems for the oxidative dehydrogenation of ethane have been synthesized and compared in terms of catalytic behavior and adsorption properties: (i) vanadium oxide supported on alumina, (ii) Sn-promoted NiO, and (iii) multicomponent MoVTeNbO with the M1 structure. The main difference in catalytic performance lies in the extent of the overoxidation of the ethylene formed, following the order VOx/Al2O3 > NiSnOx > MoVTeNb-M1. Accordingly, the selectivity to ethylene at medium and high ethane conversion follows the order MoVTeNb-M1 > NiSnOx > VOx/Al2O3. These results are confirmed by the relative reaction rates observed for the oxidation of ethane and the oxidation of ethylene. Microcalorimetry studies indicate that the heat of adsorption of both ethane and ethylene is the highest in the most selective MoVTeNb-M1 sample. Thus, the low olefin decomposition in the MoVTeNb-M1 catalyst is not due to weaker adsorption of ethylene but to the reduced ability of its active sites to activate ethylene. The same conclusion regarding the MoVTeNb-M1 catalyst can be drawn by FT-IR of adsorbed ethylene. On the other hand, NiSnOx active sites present a high overoxidation ability, as demonstrated by the notorious formation of oxygenated species, precursors of COx. However, the ethylene decomposition is rather mild because of the existence of many free Lewis sites not involved in the overoxidation reaction. In contrast, in the case of the VOx/Al2O3 catalyst, almost all active sites are involved in the oxidation path, so that the olefins decompose readily., The authors acknowledge the Spanish Ministry of Science, Innovation and Universities (MCIU) for their funding (RTl2018-099668-B-C21, MAT2017-84118-C2-1-R and MAT2017-87500-P) and FEDER. The authors from ITQ also thank Programa Severo Ochoa (SEV-2016-0683). A.A. acknowledges the Severo Ochoa Excellence Program for his grant (BES-2017-080329)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The promoter effect of Nb species on the catalytic performance of Ir-based catalysts for VOCs total oxidation

  • Chávez Sifontes, Marvin
  • García Moreno, Adrián
  • Sanchis, Rut
  • Furgeaud, Clarisse
  • Mayoral, Álvaro
  • Arenal, Raúl
  • Morgan, David J.
  • Taylor, Stuart H.
  • López Sebastián, José Manuel
  • García Martínez, Tomás
  • Solsona, Benjamín
12 figures, 2 tables.-- Supporting information available., Ir/TiO2 catalysts promoted by niobium have been synthesized, characterized by different complementary techniques and tested for the total oxidation of a set of alkanes and their mixtures. The addition of appropriate amounts of niobium to Ir/TiO2 catalysts resulted in a remarkable increase in the catalytic activity compared to the Nb-free Ir/TiO2 catalysts. The promotion caused by the presence of niobium has been related to the massive presence of isolated IrOx surface species which, interestingly, present remarkable reducibility and, consequently, excellent catalytic activity. Conversely, the IrOx species formed in the catalyst in the absence of niobium also include IrO2 clusters with lower intrinsic reactivity. Similarly, Nb-loadings exceeding the theoretical monolayer tends to the formation of bulk Nb2O5 species on the titania surface that provokes the formation of IrO2 nanoclusters. A positive influence on the reactivity of non-stoichiometric surface non- Ti3+ species that generates oxygen vacancies is also observed., This work was supported by the Regional Government of Aragon (DGA) under the research groups support programme. We also thank the MAT2017-84118-C2-1-R MCIN/AEI/10.13039/501100011033/ project and FEDER “Una manera de hacer Europa”. This research was also funded by MINECO-Spain, grant number PRE2018-085211., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cu-Ga3+-doped wurtzite ZnO interface as driving force for enhanced methanol production in co-precipitated Cu/ZnO/Ga2O3 catalysts

  • Cored, Jorge
  • Lopes, Christian W.
  • Liu, Lichen
  • Soriano, José
  • Agostini, Giovanni
  • Solsona, Benjamín
  • Sánchez-Tovar, Rita
  • Concepción, Patricia
A detailed understanding of the interactions among the active components in gallium promoted Cu/ZnO catalysts, depending on the speciation of the gallium, are reported using in situ/operando spectroscopic studies, and their effect in the CO hydrogenation to methanol unraveled. In this contribution, the promoting effect of Ga-doped in the wurtzite ZnO lattice of a Cu/ZnO/GaO catalyst is compared to that of a zinc gallate (ZnGaO) phase. Remarkably, a strong inhibition of CO formation, together with an enhanced methanol formation, are observed in the Ga-doped ZnO sample, specifically at conditions where the competitive reverse water gas shift reaction predominates. The catalytic performance has been correlated with the microstructure of the catalyst where a surface enrichment with reduced ZnO species, together with the stabilization of positive charged copper species and an increase in the amount of surface basic sites for CO adsorption are observed on the most selective sample., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through “Severo Ochoa” Excellence Programme (SEV-2016-0683) and through RTI2018-099668-B-C21 project. The authors thank the Microscopy Service of UPV for kind help on measurements. J.C. thanks the Spanish Government (MINECO) for a “Severo Ochoa” grant (BES-2015-075748). C.W.L. (Science without Borders-Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship. Authors from UV acknowledge the Spanish Ministry of Science, Innovation and Universities through the project MAT2017-84118-C2-1-R. Authors thank to the support of HZB/Bessy II (ISISS beamline) and ALBA Synchrotron (BL22-CLÆSS) staff for the successful performance of the measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evolution of the optimal catalytic systems for the oxidative dehydrogenation of ethane: The role of adsorption in the catalytic performance

  • de Arriba, Agustín
  • Solsona Espriú, Benjamín
  • Dejoz, Ana M.
  • Concepción, Patricia
  • Homs, Narcís
  • Ramírez de la Piscina, Pilar
  • López Nieto, José Manuel
Three samples that correspond to the evolution of optimal catalytic systems for the oxidative dehydrogenation of ethane have been synthesized and compared in terms of catalytic behavior and adsorption properties: (i) vanadium oxide supported on alumina, (ii) Sn-promoted NiO, and (iii) multicomponent MoVTeNbO with the M1 structure. The main difference in catalytic performance lies in the extent of the overoxidation of the ethylene formed, following the order VOx/AlO > NiSnOx > MoVTeNb-M1. Accordingly, the selectivity to ethylene at medium and high ethane conversion follows the order MoVTeNb-M1 > NiSnOx > VOx/AlO These results are confirmed by the relative reaction rates observed for the oxidation of ethane and the oxidation of ethylene. Microcalorimetry studies indicate that the heat of adsorption of both ethane and ethylene is the highest in the most selective MoVTeNb-M1 sample. Thus, the low olefin decomposition in the MoVTeNb-M1 catalyst is not due to weaker adsorption of ethylene but to the reduced ability of its active sites to activate ethylene. The same conclusion regarding the MoVTeNb-M1 catalyst can be drawn by FT-IR of adsorbed ethylene. On the other hand, NiSnOx active sites present a high overoxidation ability, as demonstrated by the notorious formation of oxygenated species, precursors of CO. However, the ethylene decomposition is rather mild because of the existence of many free Lewis sites not involved in the overoxidation reaction. In contrast, in the case of the VO/AlO catalyst, almost all active sites are involved in the oxidation path, so that the olefins decompose readily., The authors acknowledge the Spanish Ministry of Science, Innovation and Universities (MCIU) for their funding (RTl2018-099668-B-C21, MAT2017-84118-C2-1-R and MAT2017-87500-P) and FEDER. The authors from ITQ also thank Programa Severo Ochoa (SEV-2016-0683). A.A. acknowledges the Severo Ochoa Excellence Program for his grant (BES-2017-080329).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of the performance of bulk NiO catalyst in the oxidative dehydrogenation of ethane by tuning the synthesis parameters

  • Abdelbaki, Yousra
  • de Arriba, Agustín
  • Issaadi, Rachid
  • Sánchez-Tovar, Rita
  • Solsona, Benjamín
  • López Nieto, José Manuel
Highly stable and selective bulk NiO catalysts have been synthesized for the oxidative dehydrogenation (ODH) of ethane to ethylene. Interestingly, by optimizing synthesis parameters such as the amount of oxalic acid in the synthesis gel and the calcination temperature, undoped NiO catalysts have shown a consistent selectivity to ethylene of ca. 75%. The optimal catalyst requires the presence of a certain amount of oxalic acid in the synthesis gel and a final calcination at low temperatures (i.e. 350 °C). These catalysts have been deeply characterized by means of XRD, TPR, HRTEM, Raman and UV–vis diffuse reflectance spectroscopies, XPS and Electrochemical Impedance Spectroscopy measurements and tested in the ethane ODH. A novel electrochemical study has been undertaken, showing the p-character of all the NiO catalysts synthesized but differing in their capacitance values and density of cationic vacancies. The catalytic performance of NiO catalysts has been explained in terms of the different physicochemical properties (including changes in the number of vacancies) of the samples and the isolation of electrophilic oxygen species., Authors would like to acknowledge the Ministerio de Ciencia, Innovación y Universidades in Spain through projects CRTl2018-099668-B-C21 and MAT2017-84118-C2-1-R. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329). Y.A. and R.I. thank the Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zr supported on non-acidic sepiolite for the efficient one-pot transformation of furfural into γ-valerolactone

  • García Moreno, Adrián
  • Monti, Eleonora
  • Ventimiglia, Alessia
  • Dimitratos, Nikolaos
  • Miguel, P.J.
  • López, María Luisa
  • Álvarez Serrano, Inmaculada
  • García Martínez, Tomás
  • Pico, María Pilar
  • Dejoz, Ana
  • Solsona, Benjamín
10 figures y 4 tables.-- Supplementary information available., The growing demand of energy needs the search for alternative energy sources different to fossil fuels. The use of biomass as energy source is one of the most studied, because there are high value products that can be produced from biomass. One of these products is γ-valerolactone, that can be obtained from furfural, which is a biomass derived product. To transform furfural into γ-valerolactone is necessary a bifunctional catalyst and a hydrogen source. In this work, γ-valerolactone was obtained from furfural using 2-propanol as solvent and as hydrogen donor on Zr supported on sepiolite catalysts. It was demonstrated that sepiolite, which is a cheap material, can be used to develop efficient catalysts to produce high yields to γ-valerolactone from furfural in one-pot. The catalysts that presented the highest yield to γ-valerolactone were the ones with intermediate Zr-content (9–17 wt% ZrO2). The highest TOFs have been obtained by those catalysts with Zr-loading up to 9 wt% ZrO2, in which the ZrO2 nanoparticles are well dispersed on the support and no formation of large clusters of ZrO2 has been observed. Lewis and Brønsted acid sites are essential in the catalysts to produce the reactions to transform furfural into γ-valerolactone in one-pot, although in the present work, low concentration of Brønsted acid sites were observed in the catalysts. A possible positive role of basic sites to promote some intermediate steps has been also proposed. The catalytic results obtained are in the order of catalysts with Zr supported on zeolitic supports., A.G. thanks MINECO for the pre-doctoral grant (PRE2018-085211). This work was funded by the MAT2017-84118-C2-1-R, MAT2017-84118-C2-2-R, MCIN/AEI/10.13039/501100011033/projects and FEDER Una manera de hacer Europa. Authors thank the electron microscopy CAI center of UCM. Authors also thank the Generalitat Valenciana for CIAICO/2021/094., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Te-doped MoV-Oxide (M1 phase) for ethane ODH. The role of tellurium on morphology, thermal stability and catalytic behaviour

  • de Arriba, Agustín
  • Solsona, Benjamín
  • García-González, Ester
  • Concepción, Patricia
  • López Nieto, José Manuel
Undoped and Te-doped MoV-Oxide (M1 phase) catalysts have been prepared hydrothermally (Te/Mo ratio in the synthesis gel from 0 to 0.17; and heat-treated at 400 or 600°C in N atmosphere), characterized by several physicochemical techniques and tested in the oxidative dehydrogenation (ODH) of ethane. The morphology and microporosity of the catalysts, the nature of V-species on the catalyst surface and the catalytic performance strongly depend on the composition and the heat-treatment temperature. When calcined at 400°C, the selectivity to ethylene decreases when the amount of tellurium increases, whereas when heat treated at 600°C, the selectivity to ethylene increases when the Te-loading increases. These trends have been explained on the basis of the good correlation between selectivity to ethylene and the concentration of V species on the surface of catalysts, in which the most selective catalyst is that prepared with a Te/Mo ratio of 0.17 and heat-treated at 600°C., The authors would like to thank the Spanish Ministry of Economy and Competitiveness for funding the projects (MINECO/FEDER): CRTl2018-099668-B-C21, PID2019-106662RBC44, MAT2017-84118-C2-1-R and SEV-2016-0683. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329). Authors would also like to acknowledge the “A-Team” of the ITQ (Dr. Miguel Palomino, Dr. Susana Valencia and Prof. Fernando Rey) for their assistance in the performance of the adsorption experiments.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Appendix A. Supplementary material for The promoter effect of Nb species on the catalytic performance of Ir-based catalysts for VOCs total oxidation [Dataset]

  • Chávez Sifontes, Marvin
  • García Moreno, Adrián
  • Sanchis, Rut
  • Furgeaud, Clarisse
  • Mayoral, Álvaro
  • Arenal, Raúl
  • Morgan, David J.
  • Taylor, Stuart H.
  • López Sebastián, José Manuel
  • García Martínez, Tomás
  • Solsona, Benjamín
Figure S1. XRD patterns of fresh Ir/Nb/Ti catalysts (a). Green squares correspond to peaks of Nb2O5. The insert (b) corresponds to the dotted square area of fresh 1Ir/10Nb/Ti catalyst. XRD pattern of after reaction 1Ir/5Nb/Ti catalyst is also presented. Figure S2. (a) Selected area electron diffraction of TiO2 nanoparticles with 1% Ir content. (b) HRTEM images of TiO2 nanocrystals viewed in the [211] direction, FFT diffractogram is inserted. (c) and (d) size distributions of 55 TiO2 particles and 22 Ir particles randomly selected. Figure S3. Cs-corrected STEM-HAADF. a) Low-magnification image showing some Nb nanoparticles formed. b) Low-magnification image where Nb was not visualized as it still remained highly dispersed as in the original material. c) Atomic-resolution observation of a TiO2 with the same metallic distribution as the material before reaction (with the Ir species on the surface, bright layer). d) Chemical maps obtained from the image shown in (a). Figure S4. O(1s) XPS core-level spectra.-- Under a Creative Commons license BY-NC-ND 4.0, Figure S1. XRD patterns of fresh Ir/Nb/Ti catalysts. Figure S2. Figure S3. Cs-corrected STEM-HAADF. Figure S4. O(1s) XPS core-level spectra., This work was supported by the Regional Government of Aragon (DGA) under the research groups support programme. We also thank the MAT2017-84118-C2-1-R MCIN/AEI/10.13039/501100011033/ project and FEDER “Una manera de hacer Europa”. This research was also funded by MINECO-Spain, grant number PRE2018-085211., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Green synthesis of cavity-containing manganese oxides with superior catalytic performance in toluene oxidation

  • Garcia, Tomás
  • López, José Manuel
  • Mayoral, Álvaro
  • Zhang, Yaping
  • Arenal, Raul
  • Alonso-Dominguez, Daniel
  • Pico, María Pilar
  • Lopez, María Luisa
  • Dejoz, Ana
  • Alvarez-Serrano, Inmaculada
  • Sanchis, Rut
  • Solsona, Benjamín
Manganese oxide prepared by a simple hydrothermal method is highly active and stable in both lab and quasi industrial conditions for the total oxidation of toluene, achieving total conversion at only 175 degrees C in the absence of water and at 150 degrees C in the presence of 4 mol % water. Moreover, this performance is stable for at least 6 cycles. The enhanced catalytic performance has been related to the presence of highly reactive oxygen surface species. This species are probably promoted by Mn3O4 nanoparticles with Mn3+ at the tetragonal distorted cationic sites, likely compensated by structural water at the anionic sites. The presence of structural water can be related to the formation of internal cavities/vesicles in the Mn3O4 crystalline structure.