Pasar al contenido principal

VALORIZACION DE CO2: CAPTURA, Y TRANSFORMACION CATALITICA PARA ALMACENAMIENTO DE ENERGIA, COMBUSTIBLES Y PRODUCTOS QUIMICOS

RTI2018-099668-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 57
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evolution of the optimal catalytic systems for the oxidative dehydrogenation of ethane: The role of adsorption in the catalytic performance

  • De Arriba-Mateos, Agustín
  • Solsona, Benjamin
  • Dejoz, Ana M.
  • Homs, Narcís
  • Ramírez de la Piscina, Pilar
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Three samples that correspond to the evolution of optimal catalytic systems for the oxidative dehydrogenation of ethane have been synthesized and compared in terms of catalytic behavior and adsorption properties: (i) vanadium oxide supported on alumina, (ii) Sn-promoted NiO, and (iii) multicomponent MoVTeNbO with the M1 structure. The main difference in catalytic performance lies in the extent of the overoxidation of the ethylene formed, following the order VOx/Al2O3 > NiSnOx > MoVTeNb-M1. Accordingly, the selectivity to ethylene at medium and high ethane conversion follows the order MoVTeNb-M1 > NiSnOx > VOx/Al2O3. These results are confirmed by the relative reaction rates observed for the oxidation of ethane and the oxidation of ethylene. Microcalorimetry studies indicate that the heat of adsorption of both ethane and ethylene is the highest in the most selective MoVTeNb-M1 sample. Thus, the low olefin decomposition in the MoVTeNb-M1 catalyst is not due to weaker adsorption of ethylene but to the reduced ability of its active sites to activate ethylene. The same conclusion regarding the MoVTeNb-M1 catalyst can be drawn by FT-IR of adsorbed ethylene. On the other hand, NiSnOx active sites present a high overoxidation ability, as demonstrated by the notorious formation of oxygenated species, precursors of COx. However, the ethylene decomposition is rather mild because of the existence of many free Lewis sites not involved in the overoxidation reaction. In contrast, in the case of the VOx/Al2O3 catalyst, almost all active sites are involved in the oxidation path, so that the olefins decompose readily., The authors acknowledge the Spanish Ministry of Science, Innovation and Universities (MCIU) for their funding (RTl2018-099668B-C21, MAT2017-84118-C2-1-R and MAT2017-87500-P) and FEDER. The authors from ITQ also thank Programa Severo Ochoa (SEV-2016-0683). A.A. acknowledges the Severo Ochoa Excellence Program for his grant (BES-2017-080329).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A study of the oxidehydration of 1,2-propanediol to propanoic acid with bifunctional catalysts

  • Bandinelli, Claudia
  • Lambiase, Barbara
  • Tabanelli, Tommaso
  • De Maron, Jacopo
  • Dimitratos, Nikolaos
  • Basile, Francesco
  • Cavani, Fabrizio
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] The gas-phase oxidehydration (ODH) of 1,2-propanediol to propionic acid has been studied as an intermediate step in the multi-step transformation of bio-sourced glycerol into methylmethacrylate. The reaction involves the dehydration of 1,2-propanediol into propionaldehyde, which occurs in the presence of acid active sites, and a second step of oxidation of the aldehyde to the carboxylic acid. The two reactions were carried out using a cascade strategy and multifunctional catalysts, made of W-Nb-O, W-V-O and W-Mo-V-O hexagonal tungsten bronzes, the same systems which are also active and selective in the ODH of glycerol into acrylic acid. Despite the similarities of reactions involved, the ODH of 1,2-propanediol turned out to be less selective than glycerol ODH, with best yield to propanoic acid no higher than 13%, mainly because of the parallel reaction of oxidative cleavage, occurring on the reactant itself, which led to the formation of C-1-C-2 compounds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The nickel-support interaction as determining factor of the selectivity to ethylene in the oxidative dehydrogenation of ethane over nickel oxide/alumina catalysts

  • Abdelbaki, Yousra
  • De Arriba-Mateos, Agustín
  • Solsona Espriu, Benjamin Eduardo
  • Delgado Muñoz, Daniel
  • Garcia-Gonzalez, Ester
  • Issaadi, Rachid
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Nickel oxides supported on gamma-alumina (Ni-loading from 5 to 30 wt% NiO) have been synthesized and tested in the oxidative dehydrogenation (ODH) of ethane in order to determine the importance of the NiO-support interaction. The best performance was achieved by the catalyst with 15 wt% NiO; higher NiO-loadings lead to the formation of unselective bulk-like NiO and lower Ni-loadings present high proportion of free alumina surface sites. The presence of oxalic acid and/or niobium in the synthesis gel resulted in the formation of NiO particles with similar size, but higher crystallinity and reducibility than the standard 15 wt% NiO catalyst. The obtained results have revealed that, in addition to NiO crystal size, the nickel oxide-support interaction determines the catalytic performance of these catalysts., Authors would like to acknowledge the Ministerio de Ciencia, Innovacion y Universidades in Spain through projects CRTl2018-099668-B-C21, MAT2017-84118-C2-1-R and PID2019-106662RB-C44 and Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships. A.A. acknowl-edges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329) . EGG acknowledges Dr. E. Urones for the valuable assistance in the use of electron microscopy facilities as well as to the CNME (Spain) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The role of promoters on the catalytic performance of MxV2O5 bronzes for the selective partial oxidation of H2S

  • Ruiz-Rodríguez, Lidia
  • Vidal Moya, José Alejandro
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • De Arriba-Mateos, Agustín
  • Rodríguez-Castellón, Enrique
[EN] Metal-containing vanadium oxide bronzes (MxV2O5; M= Cu, Ag and Ca) have been prepared, characterized (before and after reaction) by various physicochemical techniques, and tested in the partial oxidation of H2S. The catalysts were prepared hydrothermally at 175 ¿C (from gels containing M/V molar ratios of 0.17 or 0.33) and heat-treated at 500 ¿C/2 h in N2. The most effective catalysts, showing a sulfur selectivity greater than 95 % for a H2S conversion beyond 90 %, were those presenting vanadium oxide bronze (ß-Cu0.261V2O5 or Ag0.333V2O5) as the main crystalline phase. Cu- and Ag-containing vanadium oxide bronzes were stable under reaction conditions. For calcium containing materials (mainly presenting the Ca0.17V2O5 bronze phase), the formation of CaSO4 has been observed during the reaction, which resulted in a negative effect on both activity and selectivity. The nature of active and selective sites in this type of catalysts, as well as the role of promoters, are also discussed., The authors would like to acknowledge the Ministerio de Ciencia e Innovacion of Spain (TED2021-130756B-C31, TED2021-130756B-C32 and MAT2017-84118-C2-1-R projects) . Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329) and Dr. Ferran Sabate from ITQ for his assistance with the EPR data treatment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Al2O3-Supported W-V-O bronzes catalysts for oxidative dehydrogenation of ethane

  • Benomar, S.
  • Chieregato, A.
  • Masso, A.
  • Issaadi, R.
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Vidal Moya, José Alejandro
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Supported vanadium-containing hexagonal tungsten bronzes (HTBs) were prepared for the first time using a combination of a new soft synthetic procedure and fine-tuned heat treatments. The characterization of heat-treated samples indicates that both unsupported and Al2O3-supported materials present mainly vanadium-containing crystals with HTB structure smaller in the supported materials. Raman, diffuse reflectance UV-visible and EPR spectroscopic results suggest the presence of different V species depending on the V loading and catalyst composition. When used as catalysts for ethane oxidative dehydrogenation (ODH), selected supported vanadium-HTBs show selectivity to ethylene as high as 80% at ethane conversion of around 18%. These values position these new materials among the most active and selective catalysts so far reported in the literature for ethane ODH over supported vanadium oxide catalysts., The authors acknowledge the DGICYT in Spain (projects RTI2018-099668-B-C21 and SEV-2016-0683) for financial support. The research group of Prof. Fabrizio Cavani (University of Bologna, Italy) and Consorzio INSTM (Firenze) are gratefully acknowledged for a PhD grant to A. C. The authors also thank the Electron Microscopy Service of Universitat Politecnica de Valencia for its support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Partial oxidation of H2S to sulfur on V-Cu-O mixed oxides bronzes

  • Ruiz-Rodríguez, Lidia
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Rodríguez-Castellón, Enrique
[EN] The present paper shows the influence of Cu-content in Cu-promoted V2O5 catalysts on both the physicochemical characteristics of catalysts and their catalytic performance in the partial oxidation of hydrogen sulfide. Both, the catalytic activity for H2S conversion and the selectivity to sulfur increased when increasing the Cu/V ratio of catalysts. The best catalyst gives a selectivity to sulfur at ca. 98% at total conversion of H2S. According to the characterization results (XRD, FTIR), V2O5 is partially transformed into vanadium oxide bronze, i.e. beta-Cu0.261V2O5, up to Cu/V ratios of 0.25. For higher Cu/V ratios, CuV2O6 and beta-Cu0.261V2O5 are observed. In the same way, the reducibility of V-species increased when increasing the Cu/V ratio of catalysts. On the other hand, the characterization of used catalysts indicates the transformation of V2O5 into V4O9, whereas the vanadium oxide bronze is stable under the studied reaction. The catalytic results are explained on the basis of the nature of crystalline phases and the presence of V5+-O-V4+ pairs in the more selective catalysts., The authors would like to acknowledge the Spanish MINECO Projects (CTQ2015-68951-C3-1-R and CTQ2015-68951-C3-3-R) and Severo Ochoa Program (SEV-2016-0683), and FEDER funds, for financial support. LRR thanks the MINECO for a predoctoral contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Furfural Hydrogenation on Modified Niobia

  • Jouve, Andrea
  • Cattaneo, Stefano
  • Delgado-Muñoz, Daniel
  • Scotti, Nicola
  • Evangelisti, Claudio
  • Prati, Laura
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] In this study, niobia-based materials have been used as supports for Pt nanoparticles and used in the hydrogenation of furfural. The incorporation of dopants (W6+ and Ti4+) in the Nb2O5 structure induced modifications in the surface acidity of the support; in particular, the addition of W6+ increased the amount of Lewis acid sites, while the addition of Ti4+ decreased the number of Lewis acid sites. As a result, the catalytic activity towards the hydrogenation of furfural was affected; high surface acidity resulted in high catalytic activity. The selectivity of the reaction changed with the support acidity as well, with higher amount of furfuryl alcohol produced decreasing the Lewis acid sites.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of the performance of bulk NiO catalyst in the oxidative dehydrogenation of ethane by tuning the synthesis parameters

  • Abdelbaki, Yousra
  • De Arriba-Mateos, Agustín
  • Issaadi, Rachid
  • Sánchez Tovar, Rita
  • Solsona, Benjamín
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Highly stable and selective bulk NiO catalysts have been synthesized for the oxidative dehydrogenation (ODH) of ethane to ethylene. Interestingly, by optimizing synthesis parameters such as the amount of oxalic acid in the synthesis gel and the calcination temperature, undoped NiO catalysts have shown a consistent selectivity to ethylene of ca. 75%. The optimal catalyst requires the presence of a certain amount of oxalic acid in the synthesis gel and a final calcination at low temperatures (i.e. 350 ¿C). These catalysts have been deeply characterized by means of XRD, TPR, HRTEM, Raman and UV¿vis diffuse reflectance spectroscopies, XPS and Electrochemical Impedance Spectroscopy measurements and tested in the ethane ODH. A novel electrochemical study has been undertaken, showing the p-character of all the NiO catalysts synthesized but differing in their capacitance values and density of cationic vacancies. The catalytic performance of NiO catalysts has been explained in terms of the different physicochemical properties (including changes in the number of vacancies) of the samples and the isolation of electrophilic oxygen species., Authors would like to acknowledge the Ministerio de Ciencia, Innovacion y Universidades in Spain through projects CRTl2018099668-B-C21 and MAT2017-84118-C2-1-R. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329). Y.A. and R.I. thank the Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The selective ethanol Guerbet condensation over alkali metal-doped sepiolite

  • Balestra, Giulia
  • De Maron, Jacopo
  • Tabanelli, Tommaso
  • Cavani, Fabrizio
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] In this study, alkali metal-doped sepiolite based catalysts were developed for the up-grading of ethanol through the Guerbet reaction mechanism. The catalysts were prepared by wetness impregnation with aqueous solution containing alkali metal precursors salts over calcined sepiolite, and finally activated at 500 & DEG;C in air. The catalysts have been characterized by XRD, SEM-EDS, TGA-DSC, N2-adsorption. In addition, TPD-CO2 and TPD-NH3 were used to determine the acid and basic characteristics of catalysts. The catalysts were tested into a quartz continuous gas-flow reaction system working at atmospheric pressure to investigate the effects of metal loading (wt%), the nature of the alkali metals and of the main reaction parameters (e.g., reaction temperature, weight hourly space velocity), on the production of n-butanol starting from ethanol. The highest yield (18%) was ob-tained at 400 & DEG;C with the catalyst consisting in sepiolite, calcined at 500 & DEG;C, impregnated with 7 wt% of Cs. This study proves that ad hoc modified natural sepiolites with alkali metals are effective catalysts for the Guerbet upgrading of ethanol., The authors would like to acknowledge the Ministerio de Ciencia e Innovacion of Spain (TED2021-130756B-C31).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cu-Ga3+-doped wurtzite ZnO interface as driving force for enhanced methanol production in co-precipitated Cu/ZnO/Ga2O3 catalysts

  • Cored, Jorge
  • Wittee, Christian
  • Liu, Lichen
  • Agostini, Giovanni
  • Solsona, Benjamin
  • Sánchez-Tovar, Rita
  • Soriano-Rodríguez, José
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] A detailed understanding of the interactions among the active components in gallium promoted Cu/ZnO catalysts, depending on the speciation of the gallium, are reported using in situ/operando spectroscopic studies, and their effect in the CO2 hydrogenation to methanol unraveled. In this contribution, the promoting effect of Ga3+-doped in the wurtzite ZnO lattice of a Cu/ZnO/Ga2O3 catalyst is compared to that of a zinc gallate (ZnGa2O4) phase. Remarkably, a strong inhibition of CO formation, together with an enhanced methanol formation, are observed in the Ga3+-doped ZnO sample, specifically at conditions where the competitive reverse water gas shift reaction predominates. The catalytic performance has been correlated with the microstructure of the catalyst where a surface enrichment with reduced ZnOx species, together with the stabilization of positive charged copper species and an increase in the amount of surface basic sites for CO2 adsorption are observed on the most selective sample, The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through ``Severo Ochoa"Excellence Programme (SEV-2016-0683) and through RTI2018-099668-B-C21 project. The authors thank the Microscopy Service of UPV for kind help on measurements. J. C. thanks the Spanish Government (MINECO) for a ``Severo Ochoa" grant (BES-2015-075748). C.W.L. (Science without Borders-Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship. Authors from UV acknowledge the Spanish Ministry of Science, Innovation and Universities through the project MAT201784118-C2-1-R. Authors thank to the support of HZB/Bessy II (ISISS beamline) and ALBA Synchrotron (BL22-CLAESS) staff for the successful performance of the measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimizing Reflux Synthesis Method of Mo-V-Te-Nb mixed oxide Catalysts for Light Alkane Selective Oxidation

  • Massó Ramírez, Amada
  • Ivars-Barceló, Francisco
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] The investigation here presented studies the effect of the synthesis temperature (from 80 to 110 degrees C) and the time (from 1 to 4 days) employed to precipitate catalyst precursors by reflux method, on the physic-chemical and the catalytic properties of the resulting Mo-V-Te-Nb mixed oxide catalysts for both propane partial oxidation into acrylic acid and ethane oxidative dehydrogenation (ODH) to ethylene. The insight obtained has allowed an important optimization of the not commonly used reflux method to prepare Mo-V-Te-Nb oxide materials with competitive catalytic performance. The yields achieved overcome those from optimized catalysts prepared by conventional hydrothermal method, and approach those reached with catalysts prepared using the "slurry method". The optimum rise for the synthesis temperature is found as a key factor for the reflux method. It allows access to an increased vanadium content into the reflux precipitate, which favors the formation of a pseudo-amorphous Mo-V-Te-Nb oxometallate. This precipitate behaves as a precursor for the crystallization, during the solid-state activation step at high-temperature (600 degrees C/N-2), of the structure type (TeO)(2)M20O56 (M = Mo, V, Nb), key for the selective conversion of propane or ethane. On the other hand, for the optimum temperature of synthesis, i.e. 110 degrees C, higher synthesis time of the precursor leads to smaller crystal sizes in the final catalyst (higher specific surface areas) and lowers the average oxidation state of vanadium from V+5 to V+4, which significantly enhances the catalytic behavior., Authors gratefully acknowledge the funds from DGICYT (Spain) by the project RTI2018-099668-B-C21, as well as the funds from Comunidad de Madrid by the project 2017-T1/IND-6025 within the program "Atraccion y Retencion de Talento Investigador" of the V PRICIT.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reflux-synthesized bulk and diluted W-Nb-O mixed oxide bronzes for the valorization of short-chain oxygenates aqueous mixtures

  • Delgado-Muñoz, Daniel
  • La Salvia, N.
  • Fernandez-Arroyo-Naranjo, Alberto
  • Domine, Marcelo Eduardo
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] This work reports the preparation of bulk and KIT-6-diluted W-Nb-O mixed oxide bronzes by a reflux method. The influence of the incorporation of Nb and a mesoporous silica on the physicochemical features of the catalysts is studied. The addition of Nb favors the formation of single-phase oxide bronze structure, with improved Lewis acidity; while the incorporation of KIT-6 gives rise to well-dispersed mixed metal oxide particles on the diluter. These diluted W-Nb-O catalysts present enhanced surface areas and mesopore volumes. The materials have been tested in the valorization of an aqueous model mixture (acetol/propanal/ethanol/acetic acid/water weight ratio of 5/25/10/30/30), through C-C bond formation reactions. The increase in the Lewis nature of surface acid sites stands as the key point to maximize the total organic yield during the reaction (Cs-Cio products). The best catalysts maintain their catalytic behavior after five consecutive uses., Financial support by the Spanish Government (RT12018-099668-B-C21, PGC2018-097277-B-100, and SEV-2016-0683) is gratefully acknowledged. DD and AF-A thank the Severo Ochoa Excellence Program (SVP-2014-068669) and the "La Caixa-Severo Ochoa" Foundation, respectively, for their fellowships. NS thanks "Conselho Nacional de Desenvolvimento Cientifico y Tecnologico (CNPq)" in Brasil. Authors are also grateful to the Electron Microscopy Service (Universitat Politecnica de Valencia) for facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Upgrading the reflux method as novel route for competitive catalysts in alkane selective oxidation

  • Masso Ramírez, Amada
  • De Arriba-Mateos, Agustín
  • Ivars Barceló, Francisco
  • Ykrelef, Adel
  • Solsona, Benjamín
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] In the present article we show that, although the reflux method is not common for the synthesis of multicomponent MoVTeNbO catalysts, an optimized reflux synthesis of metallic precursors leads to efficient materials for the oxidative dehydrogenation of ethane and the selective oxidation of propane into acrylic acid, with the results at the same level as those of the best catalysts reported in the literature to date. It has been demonstrated that the reflux temperature is of paramount importance to achieve active and selective catalysts. Thus, the incorporation of vanadium and niobium to a polyoxometalate in the catalyst precursors is favored by refluxing at 110 & DEG;C, promoting the formation of the desired orthorhombic M1 phase. Additionally, the incorporation in the synthesis gel of cations such as ammonium or methylammonium provokes a further improvement of the catalytic performance whenever the activation procedure is carefully controlled., The authors gratefully acknowledge the financial support by the Ministerio de Ciencia e Innovacion of Spain, MINECO/FEDER (Projects: PID2021-126235OB-C31, PID2021-126235OB-C33, TED2021-130756B-C32 and TED2021-129555B-I00). F. Ivars-Barcelo gratefully acknowledges the support from "Ramon y Cajal" excellence program for recruitment (Ref.: RYC2020-029470-I/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Innovative Design of Heterogeneous Catalysts with Improved CO2 Hydrogenation Performance

  • Cored Bandrés, Jorge
[ES] El cambio climático es una de las amenazas de nuestro tiempo. Los gases de efecto invernadero, como el CO2, son los principales causantes de este fenómeno, siendo necesario disminuir urgentemente sus emisiones. En 2019, la Comisión Europa presentó el "Pacto Verde Europeo", que será clave para alcanzar un objetivo tremendamente ambicioso para nuestra región: la neutralidad climática de aquí a 2050. Las estrategias de descarbonización incluidas en su hoja de ruta van a implicar necesariamente la transición energética de los combustibles fósiles a las energías renovables, reduciendo de forma masiva la liberación de CO2. En este sentido, el desarrollo de tecnologías efectivas de Captura, Almacenamiento y Uso del Carbono (CAUC) permitirá la valorización del CO2, evolucionando hacia una economía de carbono circular. La presente Tesis Doctoral se enmarca en el diseño, síntesis y caracterización de sistemas catalíticos heterogéneos innovadores basados en metales capaces de transformar el CO2 en otros productos de valor añadido. Entre un amplio catálogo de reacciones que "conectan" el CO2 con diversos compuestos basados en carbono, esta Tesis se centrará principalmente en la síntesis de dos moléculas C1 plataforma de interés industrial: el metanol y el metano. Los Capítulos 3 y 4 están dedicados a la síntesis de metanol, un proceso exotérmico limitado termodinámicamente debido a la estabilidad inherente de la molécula de CO2, así como a la presencia de la reacción competitiva RWGS. Por un lado, el Capítulo 3 se centra en el efecto promotor del galio sobre las propiedades estructurales, electrónicas y catalíticas de materiales basados en Cu/ZnO (sistemas CZG). Mediante un enfoque espectroscópico-catalítico multidisciplinar se ha comparado el efecto promotor del Ga3+ dopado en la red de un ZnO tipo wurtzita presente en un catalizador Cu/ZnO/Ga2O3 con el de una fase de galato de zinc (ZnGa2O4). Por otro lado, en el Capítulo 4 se muestra un catalizador bifuncional que contiene nanopartículas de Cu de 2 nm y especies Cu+, con el objetivo de enfrentarse a la inherente baja actividad de estas pequeñas partículas, hecho que impide mejorar la eficiencia atómica de los catalizadores, dificultando así la obtención de resultados catalíticos competitivos en la hidrogenación de CO2. La realización de un estudio espectroscópico detallado (combinado con cálculo teórico y ensayos catalíticos) sobre un catalizador óxido mixto de Cu-Mg-Al derivado de un precursor de hidrotalcita tras calcinación y posterior reducción (CuHT-230) pone de manifiesto el papel clave de los iones Cu+ dopados en estructura en la producción de metanol. El éxito de las tecnologías CAUC a medio-largo plazo dependerá no solo del desarrollo de catalizadores competitivos, sino también de su capacidad para operar en condiciones de reacción más suaves, permitiendo que estos procesos sean viables económicamente. Por ello, el concepto de eficiencia energética se abordará en el Capítulo 5, a través de un innovador diseño de catalizador tipo "shell/core" formado por un núcleo de rutenio metálico y una envoltura de carburo de rutenio, sintetizado via hidrotermal. Este sistema (Ru@EDTA-20) exhibe una actividad excepcionalmente alta para la hidrogenación de CO2 a metano a bajas temperaturas (160-200 °C) con una selectividad a CH4 del 100%, superando a catalizadores de bibliografía que normalmente operan a mayores temperaturas (400-500 °C). Por último, en el Capítulo 6 se estudia un catalizador modelo compuesto por un alumino-silicato bidimensional sintetizado sobre una superficie de Ru(0001), investigación realizada durante mi estancia internacional en el Laboratorio Nacional de Brookhaven (Nueva York, EE.UU.). La combinación de estos materiales en el mismo composite permite la creación de un nanoespacio confinado que puede emplearse como nanorreactor. En este proyecto, se seleccionó la reacción de formación de agua como modelo, que se exploró a nivel fundamental en el sincrotrón NSLS-II., [CA] El canvi climàtic és una de les amenaces del nostre temps. Els gasos d'efecte d'hivernacle, com el diòxid de carboni, són els principals causants d'aquest fenomen, sent necessari reduir urgentment les seues emissions. En 2019, la Comissió Europea va presentar el "Pacte Verd Europeu", que serà clau per a aconseguir un objectiu tremendament ambiciós per a la nostra regió: la neutralitat climàtica d'ací a 2050. Les estratègies de descarbonització incloses en el seu full de ruta implicaran necessàriament la transició energètica dels combustibles fòssils a les energies renovables, reduint de manera massiva l'alliberament de CO2. En aquest sentit, el desenvolupament de tecnologies efectives de Captura, Emmagatzematge i Ús del Carboni (CEUC) permetrà la valorització del CO2, evolucionant cap a una economia de carboni circular. La present Tesi Doctoral s'emmarca en el disseny, síntesi i caracterització de sistemes catalítics heterogenis innovadors basats en metalls capaços de transformar el CO2 en altres productes de valor afegit. Entre un ampli catàleg de reaccions que "connecten" el CO2 amb diversos compostos basats en carboni, aquesta Tesi se centrarà principalment en la síntesi de dues molècules C1 plataforma d'interés industrial: el metanol i el metà. Els Capítols 3 i 4 estan dedicats a la síntesi de metanol, un procés exotèrmic limitat degut tant a l'estabilitat inherent de la molècula de CO2 com a la presència de la reacció competitiva RWGS. D'una banda, el Capítol 3 se centra en l'efecte promotor del gal·li sobre les propietats estructurals, electròniques i catalítiques de materials basats en Cu/ZnO (sistemes CZG). Mitjançant un enfocament espectroscòpic-catalític multidisciplinari s'ha comparat l'efecte promotor del Ga3+ dopat en la xarxa d'un ZnO (wurtzita) present en un catalitzador Cu/ZnO/Ga2O3 amb el d'una fase de ZnGa2O4. D'altra banda, en el Capítol 4 es mostra un catalitzador bifuncional que conté nanopartícules de Cu de 2 nm i espècies Cu+, amb l'objectiu d'enfrontar-se a la inherent baixa activitat d'aquestes petites partícules, fet que impedeix millorar l'eficiència atòmica dels catalitzadors, dificultant així l'obtenció de resultats catalítics competitius en la hidrogenació de CO2. La realització d'un estudi espectroscòpic detallat (combinat amb càlcul teòric i assajos catalítics) sobre un catalitzador òxid mixt de Cu-Mg-Al derivat d'un precursor de hidrotalcita després de calcinació i posterior reducció (CuHT-230) posa de manifest el paper clau dels ions Cu+ dopats en estructura en la producció de metanol. L'èxit de les tecnologies CEUC a mig-llarg termini dependrà no solament del desenvolupament de catalitzadors competitius, sinó també de la seua capacitat per a operar en condicions de reacció més suaus, permetent que aquests processos siguen viables econòmicament. Per això, el concepte d'eficiència energètica s'abordarà en el Capítol 5, a través un innovador disseny de catalitzador tipus "shell/core" format per un nucli de ruteni metàl·lic i un embolcall de carbur de ruteni, sintetitzat mitjançant tractament hidrotermal. Aquest sistema (Ru@EDTA-20) exhibeix una activitat excepcionalment alta per a la hidrogenació de CO2 a metà a baixes temperatures (160-200 °C) amb una selectivitat a CH4 del 100%, superant a catalitzadors de bibliografia que normalment operen a majors temperatures (400-500 °C). Finalment, en el Capítol 6 s'estudia un catalitzador model compost per un alumino-silicat bidimensional sintetitzat sobre una superfície de Ru(0001), investigació realitzada durant la meua estada internacional en el Laboratori Nacional de Brookhaven (Nova York, els Estats Units). La combinació d'aquests dos materials en el mateix "composite" permet la creació d'un nano-espai confinat que pot emprar-se com nano-reactor. En aquest projecte, es va seleccionar la reacció de formació d'aigua com a model, que es va explorar a nivell fonamental en el sincrotró NSLS-II., [EN] Climate change is one of the existential threats of our times. Greenhouse gases (GHG), such as carbon dioxide, are primary drivers of this phenomenon, and their emissions need to be urgently reduced. In 2019, the European Commission presented the European Green Deal, which will help the EU to attain an ambitious goal for our region: to become carbon-neutral by 2050. The decarbonization strategies included in the roadmap towards net-zero emissions will imply the energy transition from fossil fuels to renewable energies, with a massive reduction of CO2 deliverance. In this sense, the development of effective Carbon Capture and Storage (CCS) and Carbon Capture and Utilization (CCU) technologies will allow the valorization of CO2, evolving into a circular carbon economy. The present Doctoral Thesis focuses on the design, synthesis and characterization of innovative heterogeneous metal-based systems, which are able to transform CO2 into value-added products. Among a wide catalogue of reactions that "connects" CO2 with various carbon-based compounds, this thesis will be devoted to the synthesis of two C1 platform chemicals of industrial interest: methanol and methane. Chapters 3 and 4 are dedicated to methanol synthesis, a highly hampered exothermic process due to the inherent stability of the CO2 molecule and the presence of the competitive reverse water-gas shift reaction (RWSG). On the one hand, Chapter 3 is focused on the promoting effect of gallium on the structural, electronic, and catalytic properties of Cu/ZnO based materials (CZG systems). In particular, the promoting effect of Ga3+-doped in the wurtzite ZnO lattice of a Cu/ZnO/Ga2O3 catalyst is compared to that of a zinc gallate (ZnGa2O4) phase following a multimodal spectroscopic-catalytic approach. In Chapter 4, a bifunctional catalyst containing 2 nm Cu nanoparticles and Cu+ species is presented, to overcome the "assumed" low activity of small copper particles that prevents obtaining high atom efficiency and competitive catalytic results in the CO2 hydrogenation to methanol. A detailed spectroscopic study (combined with theoretical calculations and catalytic tests) performed on a Cu-Mg-Al mixed oxide catalyst derived from a hydrotalcite precursor by calcination and further reduction (CuHT-230) highlights the key role of doped Cu+ ions in methanol production. The success of CCU technologies in the medium-long term will depend not only on the development of competitive catalysts but also on their ability to operate under milder reaction conditions, which will make these processes economically viable. Consequently, the energy efficiency issue will be addressed in Chapter 5 with the innovative design of a core-shell structure formed by a core of metallic ruthenium and a shell of ruthenium carbide, synthesized via hydrothermal treatment. This catalyst (Ru@EDTA-20) exhibits exceptional high activity for CO2 hydrogenation to methane (Sabatier reaction) at low temperatures (160-200 °C) with 100% selectivity to CH4, outperforming the state of the art catalysts operating at 400-500 °C. Finally, Chapter 6 covers the investigation carried out on a model ruthenium-based catalyst composed of a 2D-bilayered aluminosilicate grown over a Ru(0001) surface during my international short-term stay at Brookhaven National Laboratory (New York, USA). The combination of these materials in a composite allows the creation of a confined nano-space that can be exploited as a nano-reactor. In this project, water formation reaction (WFR) was selected as model reaction, which was fundamentally explored at NSLS-II synchrotron.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

CuZnAl hydrotalcites as suitable precursors for chromium-free ester hydrogenolysis catalysts

  • Aubrecht, Jaroslav
  • Pospelova, Violetta
  • Kikhtyanin, Oleg
  • Straka, Petr
  • Kubicka, David
  • MARTINEZ FELIU, AGUSTIN|||0000-0002-9974-1567
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] Ester hydrogenolysis is industrially performed over Adkins catalysts. Their use is being restricted as they contain environmentally unfriendly Cr2O3. As a potential replacement, five co-precipitated CuZnAl catalysts with various Cu/Zn and Al/(Cu+Zn) atomic ratios were studied. The structure transformation during the whole catalyst lifecycle was determined. The catalyst precursors consisted of CuZnAl-hydrotalcite (HTC). Although the Cu/Zn ratio did not affect the HTC structure, an increase in Al content resulted in smaller Cu nanoparticles with a larger surface area. In the reduced catalysts, both Cu+ and Cu0 species were identified using FTIR-CO. XPS revealed catalyst surface reconstruction after catalyst reduction and catalytic reaction. The evaluation of the catalysts in dimethyl adipate hydrogenolysis indicated that the catalyst having the lowest Cu loading possessed the highest activity, due to its high SCu and Cu/Zn = 1. Generally, higher activity was achieved by reducing the Cu/Zn and increasing the Al/(Cu+Zn) ratios., Financial support from Czech Science Foundation (project No. GA17-05704S and GA20-28093S) is greatly acknowledged. The cata- lyst precursors were prepared with support of CATPRO infrastructure. Experimental results were accomplished by using Large Research Infrastructure ENREGAT supported by the Ministry of Education, Youth and Sports of the Czech Republic under project no. LM2018098. P.C. and A.M. acknowledge financial support from the Spanish Government through the RTI2018-099668-B-C21 and RTI2018-102161 projects. The authors are grateful to the Microscopy Service of the Universitat Polite ` cnica de Vale ` ncia (UPV) for assistance in microscopy characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ce-modified zeolite BEA catalysts for the trichloroethylene oxidation. The role of the different and necessary active sites

  • Golabek, Kinga
  • Tarach, Karolina A.
  • Kruczala, Krzysztof
  • Girman, Vladimir
  • Góra-Marek, Kinga
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
[EN] This paper reports the activity of different Ce-BEA zeolites for the catalytic oxidation of trichloroethylene and it is focused on determining the nature of the catalyst active sites. The study was made by using a microporous zeolite BEA, two types of desilicated BEA zeolites and mildly steamed desilicated BEA zeolites. The catalysts were prepared by introducing Ce to the zeolites with incipient wetness impregnation and their structural, textural, and acidic properties were established. The evolution of TCE conversion was correlated with the physicochemical properties of the zeolites. It is shown that highly developed mesopore surface area, well-dispersed cerium species and a high number of Bronsted sites results in the highest activity. The activity and selectivity of the Ce-loaded zeolites were found to be dependent on the number of high strength Bronsted acid centres. The hierarchical materials with a higher density of hydroxyls showed higher yields to HCl while the formation of chlorine was prevented., The work was financed by the Grant No. 2015/18/E/ST4/00191 from the National Science Centre, Poland. J.M-T. and A.E.P thank Spanish Governmentthrough "Severo Ochoa" SEV-2016-0683, RTI2018-099668-B-C21, RTI2018-101784-B-I00 and the Fundacion Ramon Arecesthrough a research contract of the "Life and Materials Science" program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Discerning the Metal Doping Effect on Surface Redox and Acidic Properties in a MoVTeNbOx for Propa(e)ne Oxidation

  • Quintana-Solórzano, Roberto
  • Mejía-Centeno, Isidro
  • Armendáriz-Herrera, Héctor
  • Ramírez-Salgado, Joel
  • Rodríguez-Hernandez, Andrea
  • Guzmán-Castillo, Maria de Lourdes
  • Valente, Jaime S.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Adding a small quantity of K or Bi to a MoVTeNbOx via impregnation with inorganic solutions modifies its surface acid and redox properties and its catalytic performance in propa(e)ne partial oxidation to acrylic acid (AA) without detriment to its pristine crystalline structure. Bidoping encourages propane oxydehydrogenation to propene, thus enlarging the net production rate of AA up to 35% more. The easier propane activation/higher AA production over the Bi-doped catalyst is ascribed to its higher content of surface V leading to a larger amount of total V5+ species, the isolation site effect of NbOx species on V, and its higher Lewis acidity. K-doping does not affect propane oxydehydrogenation to propene but mainly acts over propene once formed, also increasing AA to a similar extent as Bidoping. Although K-doping lowers propene conversion, it is converted more selectively to acrylic acid owing to its reduced Brønsted acidity and the presence of more Mo6+ species, thereby favoring propene transformation via the ¿-allylic species route producing acrylic acid over that forming acetic acid and COx via acetone oxidation and that yielding directly COx., This work was financially supported by the Mexican Institute of Petroleum, research project number D.61080. The authors want to thank the technical support from Miguel A. Perez for performing the catalytic experiments and the personnel at the XRD and XPS laboratories for fruitful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the Nature of the Promoter in NiO Catalysts on the Selectivity to Olefin During the Oxidative Dehydrogenation of Propane and Ethane

  • Delgado Muñoz, Daniel
  • Sanchis, Rut
  • Solsona Espriu, Benjamin Eduardo
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A comparative study of the catalytic properties for the oxidation of C2-C3 alkanes and olefins has been carried out over unpromoted and M-promoted NiO catalysts (Me¿=¿K, La, Ce, al, Zr, Sn, Nb). The catalysts have been characterized by several physico-chemical techniques (UV Raman, Visible Raman, FTIR of adsorbed CO and XPS). The characteristics of promoter elements are of paramount importance, since they are able to modify both the nature of the active nickel and the concentration of electrophilic O2¿/O¿ oxygen species. Thus, a relatively high acidity and valence of the promoter oxide (with oxidation state higher than¿+¿3) are necessary to achieve high selectivity to olefins during the oxidative dehydrogenation (ODH) of C2¿C3 alkanes. In addition, an inverse correlation between the selectivity to the corresponding olefin and the concentration of electrophilic oxygen species has been observed, although the selectivity to propene during propane ODH is lower than the selectivity to ethylene achieved during ethane ODH. On the other hand, a very low influence of alkane conversion on the selectivity to the corresponding olefins is observed. This behaviour can be explained by considering that the reaction rate for olefin combustion is lower than the reaction rate for alkane oxidation. However, the comparative study of the oxidation of alkanes and olefins suggest that the differences observed between the ODH of propane and ethane are not related to the reactivity of olefins, but to the different number and reactivity of C¿H bonds in both alkanes. A discussion on the importance of the concentration of active sites and the characteristics of the alkanes fed on the selectivity to olefin during the alkane ODH is also presented., The authors would like to acknowledge the Ministerio de Ciencia, Innovacion y Universidades of Spain (RTl2018-099668-B-C21 and MAT2017-84118-C2-1-R projects) and FEDER. Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tungsten-titanium mixed oxide bronzes: Synthesis, characterization and catalytic behavior in methanol transformation

  • Delgado-Muñoz, Daniel
  • Solsona Espriu, Benjamín Eduardo
  • Zamora Blanco, Segundo
  • Agouram, Said
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Tungsten oxide bronze-based materials show extremely adaptive structural and compositional features that make them suitable for functional properties modulation. Herein we report the preparation of a series of Ti-containing tungsten oxide catalysts presenting a hexagonal tungsten bronze-type structure. The insertion of Ti4+ within the structure (likely in the octahedral framework of the hexagonal tungsten bronze) leads to an increase in the number of strong acid sites, and the disappearance of W5+ surface species found in the undoped tungsten oxide. With the aim of studying the acid-redox properties of the titled catalysts, the catalytic transformation of methanol has been carried out in the presence and the absence of O-2 in the feed. Both catalytic activity and the acid-redox properties of these catalysts are highly dependent on catalyst composition and reaction conditions applied (i.e. in the presence or in the absence O-2 in the feed). Aerobic experiments show the depletion of the redox functionality (i.e. no formaldehyde detected in the products) when Ti4+ is incorporated in the framework (i.e. 100% selectivity to dimethyl ether). On the other hand, all the catalysts show the loss of the redox function and a decrease in the catalytic activity when anaerobic conditions are used. In the absence of oxygen, the catalysts are still active in the dehydration of methanol to dimethyl ether, i.e. they maintain their acid functionality even when oxygen is not present in the feed. The results are discussed in terms of the available surface active sites present in each case., Authors would like to thank DGICYT in Spain for RTI2018-099668-B-C21, CTQ2015-68951-C3-1-R and MAT2017-84118-C2-1-R projects. Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). Finally, authors thank the Electron Microscopy Service of SCSIE of Universitat de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Te-doped MoV-Oxide (M1 phase) for ethane ODH. The role of tellurium on morphology, thermal stability and catalytic behaviour

  • De Arriba-Mateos, Agustín
  • Solsona, Benjamin
  • Garcia-Gonzalez, Ester
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Undoped and Te-doped MoV-Oxide (M1 phase) catalysts have been prepared hydrothermally (Te/Mo ratio in the synthesis gel from 0 to 0.17; and heat-treated at 400 or 600ºC in N2 atmosphere), characterized by several physicochemical techniques and tested in the oxidative dehydrogenation (ODH) of ethane. The morphology and microporosity of the catalysts, the nature of V-species on the catalyst surface and the catalytic performance strongly depend on the composition and the heat-treatment temperature. When calcined at 400ºC, the selectivity to ethylene decreases when the amount of tellurium increases, whereas when heat treated at 600ºC, the selectivity to ethylene increases when the Te-loading increases. These trends have been explained on the basis of the good correlation between selectivity to ethylene and the concentration of V4+ species on the surface of catalysts, in which the most selective catalyst is that prepared with a Te/Mo ratio of 0.17 and heat-treated at 600ºC., The authors would like to thank the Spanish Ministry of Economy and Competitiveness for funding the projects (MINECO/FEDER) : CRTl2018-099668-B-C21, PID2019-106662RBC44, MAT2017-84118- C2-1-R and SEV-2016-0683. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329) . Authors would also like to acknowledge the "A -Team" of the ITQ (Dr. Miguel Palomino, Dr. Susana Valencia and Prof. Fernando Rey) for their assistance in the performance of the adsorption experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tungsten-niobium oxide bronzes: a bulk and surface structural study

  • Delgado-Muñoz, Daniel
  • Trunschke, Annette
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Materials from the WO3-Nb2O5 system, presenting bronze-type crystal structures, display outstanding functional properties for several applications as thermoelectric materials, lithium-ion battery electrodes, or catalysts. In this work, a series of W-Nb-O oxide bronzes have been synthesized by the hydrothermal method (with Nb/(W + Nb) ratios in the range of 0-1). A combination of bulk and surface characterisation techniques has been applied to get further insights into: (i) the effect of thermal treatments on as-prepared materials and (ii) the surface chemical nature of W-Nb-O oxide bronzes. Thermal treatments promote the following structural changes: (i) loss of emerging long-range order and (ii) the elimination of NH4+ and H2O species from the structural channels of the as-synthesized materials. It has been observed that W-Nb-O bronzes with Nb at% of ca. 50% are able to retain a long-range order after heat-treatments, which is attributed to the presence of a Cs-0.5[W2.5Nb2.5O14]-type structure. Increasing amounts of Nb 5T in the materials (i) promote a phase transition to pseudocrystalline phases ordered along the c-axis; (ii) stabilize surface W s. species (elucidated by XPS); and (iii) increase the proportion of surface Lewis acid sites (as determined by the FTIR of adsorbed CO). Results suggest that pseudocrystalline oxides (with a Nb at% >= 50%) are closely related to NbO2 pentagonal bipyramid-containing structures. The stabilisation of Lewis acid sites on these pseudocrystalline materials leads to a higher yield of heavy compounds, at the expense of acrolein formation, in the gas-phase dehydration of glycerol., The authors would like to acknowledge the Ministerio de Ciencia, Innovacion y Universidades in Spain for the financial support (RTI2018-099668-B-C21 and SEV-2016-0683 projects), and the Electron Microscopy Service at Universitat Politecnica de Valencia for providing facilities and technical support. D. D. also thanks Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

V-Porphyrins Encapsulated or Supported on Siliceous Materials: Synthesis, Characterization, and Photoelectrochemical Properties

  • Myltiykbayeva, Zhannur K.
  • Seysembekova, Anar
  • Sánchez-Tovar, Rita
  • Fernández-Domene, Ramón M.
  • Solsona, Benjamín
  • Moreno-Torralbo, Beatriz Maria
  • Vidal Moya, José Alejandro
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Metalloporphyrin-containing mesoporous materials, named VTPP@SBA, were prepared via a simple anchoring of vanadyl porphyrin (5,10,15,20-Tetraphenyl-21H,23H-porphine vanadium(IV) oxide) through a SBA-15-type mesoporous material. For comparison, vanadyl porphyrin was also impregnated on SiO2 (VTPP/SiO2). The characterization results of catalysts by XRD, FTIR, DR-UV-vis, and EPR confirm the incorporation of vanadyl porphyrin within the mesoporous SBA- 15. These catalysts have also been studied using electrochemical and photoelectrochemical methods. Impedance measurements confirmed that supporting the porphyrin in silica improved the electrical conductivity of samples. In fact, when using mesoporous silica, current densities associated with oxidation/reduction processes appreciably increased, implying an enhancement in charge transfer processes and, therefore, in electrochemical performance. All samples presented n-type semiconductivity and provided an interesting photoelectrocatalytic response upon illumination, especially silica-supported porphyrins. This is the first time that V-porphyrin-derived materials have been tested for photoelectrochemical applications, showing good potential for this use., This work was supported by the Ministry of Education and Science of the Republic of Kazakhstan (project No. ARP08856825-OT-20) and the Ministerio de Ciencia e Innovacion of Spain (projects PID21-126235OB-C31 and PID21-126235OB-C33).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Precursors of tetragonal tungsten bronzes as catalysts in selective reactions: Liquid phase oxidation of diphenyl sulfide and gas phase oxidation of hydrogen sulfide

  • Egusquiza, María G.
  • Muñoz, Mercedes
  • Romanelli, Gustavo
  • Cabello, Carmen I.
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Soriano-Rodríguez, José
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Mixed metal oxides, of the type (KNaM)xP0.11WV0.2NbOx and (NH4)x/(Na)xP0.11WV0.2NbOx, were prepared by hydrothermal synthesis from lacunary heteropolytungstates, [M4(H2O)2(PW9O34)2]10- (MPW9, with M(II) = Co, Cu or Mn) and their precursor Na8H(PW9O34) (NaPW9), chemically modified by Nb(V) and V(IV). For comparison mixed metal oxides were also synthesized by using a Keggin heteropolytungstates [PW12O40]3- as tungsten precursor. The pristine samples were finally heat-treated at 500 degrees C in flowing N2 for 2 h. The resulting mixed metal oxides were characterized by several physico-chemical techniques and tested in both the liquid phase catalytic oxidation of diphenyl sulfide (DPS), in friendly environmental conditions (using tert-butyl hydroperoxide as oxidant), and in the gas phase partial oxidation of hydrogen sulfide to sulfur (using air at oxidant). Although the catalytic behavior of these catalysts strongly depends on the composition of catalysts, high activity and selectivity have been achieved over mixed metal oxides in both reactions. The good catalytic performance of species containing Cu(II) was evidenced in both reactions studied and the reactivity of this element could be explained by its structural and vibrational spectroscopic properties., MGE, MM, CIC and GR thank the financial support by CICPBA Project and UNLP Project 1207, JMLN, MDS and JS thank the financial support by the Spanish Government (Project RTI2018-099668-B-C21). JS also thanks Spanish Goverment fellowship (PRE2019-087432).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxidative dehydrogenation of ethane on diluted or promoted nickel oxide catalysts: Influence of the promoter/diluter

  • Delgado, D.
  • Solsona, B.
  • Sanchis, R.
  • Rodríguez-Castellón, E.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Ti- and Nb- containing NiO catalysts have been synthesized by two different preparation methods: i) by precipitation (Me-Ni-O oxides, Me = Nb or Ti), in order to prepare promoted NiO catalysts; and ii) by wet impregnation on TiO2 or NbOx supports, in order to prepare diluted/supported NiO catalysts. The catalysts have been also characterized and tested in the oxidative dehydrogenation of ethane. The catalytic performance of Ti- and Nb-promoted catalysts strongly depends on the composition, although in both cases the optimal one is found at similar Ti or Nb loadings (ca. 90 wt% NiO), showing similar ethylene selectivity in the ODH of ethane (ca. 90% at 10¿20% ethane conversion). However, in the case of diluted catalysts, the catalytic behavior of Ti- and Nb- containing catalysts is drastically different. Then, over TiO2-diluted NiO catalyst, the highest selectivity to ethylene (ca. 90% selectivity) is achieved at NiO loading of 20 wt.%. However, over Nb2O5-diluted NiO catalyst, selectivity to ethylene was lower than 70%. A discussion on the characteristics of selective catalysts is done. In this case, the best catalysts must present a low concentration of free NiO and TiO2 or Nb2O5 phases, maximizing the Ni-O-Ti or Ni-O-Nb interaction. Interestingly, this takes place at different NiO loading depending on the preparation method and the nature of promoted/diluter. The low selectivity to ethylene achieved by NiO diluted with Nb2O5 has been related to the low interaction of NiO with the surface of Nb2O5, which hinders the elimination of unselective electrophilic O- species., The authors would like to acknowledge the DGICYT in Spain (CRTl2018-099668-B-C21 and RTl2018-099668-B-C22 and MAT2017-84118-C2-1-R projects). Authors from ITQ also thank Project SEV-20160683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of Polymer Protected Pd-Ag/ZnO Catalysts for Phenylacetylene hydrogenation

  • Zharmagambetova, Alima
  • Auyezkhanova, Assemgul
  • Talgatov, Eldar
  • Jumekeyeva, Aigul
  • Buharbayeva, Farida
  • Akhmetova, Sandugash
  • Myltykbayeva, Zhannur
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A simple and environmentally friendly method, based on sequential adsorption of polyacrylamide (PAM) and transition metal ions (Pd2+, Ag+) on zinc oxide precipitated from water solution, was used to synthesize supported mono- and bimetallic catalysts with various Pd:Ag ratios. The catalyst characterization results indicated that PAM and metal ions are completely adsorbed by zinc oxide, forming polymer-stabilized Pd and Ag nanoparticles of 1¿3 nm in size, evenly distributed on the support surface. The catalysts were studied in the hydrogenation of phenylacetylene under mild conditions (0.1 MPa, 40 °C)., This work was carried out with the financial support of the State Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan (Grants Nos. AP09563383 and AP09259638). JMLN thanks also Spanish Government for financial support (CRTl2018-099668-B-C21 project).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancement of ethylene production by alkali metal doping of MoVSb mixed oxide catalyst for ethane oxidative dehydrogenation

  • Ivars Barceló, F.
  • Solsona, B.
  • Asedegbega-Nieto, E.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Hydrothermally prepared Mo-V-Sb mixed oxides doped with alkali metal cations (Li+, Na+, K+, Rb+, or Cs+) show a significantly improved catalytic behavior in the oxidative dehydrogenation of ethane (ODH) compared to conventional alkali metal-free MoVSbO catalysts. Initial selectivity to ethylene above 95 % was held up to 20 % of ethane conversion for all alkali metal promoted MoVSbO catalysts, as well as lower ethylene overoxidation at higher ethane conversion, with differences depending on the alkali metal employed. Thus, from Li to K, the enhanced catalytic performance follows a bottom-up trend as increasing the size of the cation. An intermediate behavior is observed though for the catalyst doped with Cs cations, with the highest atomic radius. The K-doped MoVSbO catalyst is the least prone to both ethane total oxidation and ethylene overoxidation, which enables up to 90 % selectivity to ethylene at ethane conversion higher than 65 %., This work was supported by the Ministerio de Ciencia e Innovacion of Spain (projects PID21-126235OB-C31 and PID21-126235OB-C33). F. Ivars-Barcelo also acknowledges the Ministerio de Ciencia e Innovacion of Spain by the support from the "Ramon y Cajal" excellence grant (Ref.: RYC2020-029470-I/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fe2O3 supported on hollow micro/mesospheres silica for the catalytic partial oxidation of H2S to sulfur

  • Cecilia, J.A.
  • Marques Correia, L.
  • Rodríguez-Castellón, E.
  • Silveira Vieira, R.
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A family of Fe-based catalysts supported hollow silica mesospheres has been synthesized and tested in the catalytic partial oxidation of H2S to elemental sulfur at 170.180 degrees C, atmospheric pressure and under 300 min of time-on-stream. The characterization of the synthesized catalysts by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance UV-vis spectra (DRS), H-2-termoprogrammed reduction (H-2-TPR), N-2 adsorption-desorption at -196 degrees C and X-ray photoelectron spectroscopy (XPS) reveals the formation of a catalytic system with high micro- and mesoporosity with high dispersion of the Fe2O3 species. The catalytic results reported high activity in the selective oxidation of H2S, reaching a highest conversion value close to 94% with a selectivity towards elemental sulfur of 98% after 300 min of time on stream (TOS) at 180 degrees C for the HMS-10Fe catalyst. The comparison of Fe-containing HMS (10 wt% of iron loading) with other SiO2-based supports, as a fumed silica (Cab-osil) or a mesoporous silica (SBA-15), presents different H2S conversion values, following the next trend: HMS-10Fe > SBA-10Fe > Cab-10Fe. These results suggest that the use of a support with a narrow pore tend to facilitate the iron dispersion favoring higher conversion rates., The authors wish to acknowledge the financial support provided by the Ministry of Economy and Competitiveness (Spain) (MINECO) CTQ2015-68951-C1-3R y CTQ2015-68951-C3-3R, Junta de Andalucia (Spain) P12-RNM 1565 and FEDER funds. In addition, the authors also thank Fundacao Cearense de Apoio ao Desenvolvimento Cientifico e Tecnologico (FUNCAP) by the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES) - Processo: PDSE 99999.002602/2014-08.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combined Spectroscopic and Computational Study of Nitrobenzene Activation on Non-Noble Metals-Based Mono- and Bimetallic Catalysts

  • Millán-Cabrera, Reisel|||0000-0002-4489-5411
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Cerdá-Moreno, Cristina
[EN] In this paper, substituted anilines are industrially obtained by direct hydrogenation of nitroaromatic compounds with molecular H-2 using metals as catalysts. Previous theoretical studies proposed that the mechanism of the reaction depends on the nature of the metal used as a catalyst, and that rationally designed bimetallic materials might show improved catalytic performance. Herein, we present IR spectroscopic studies of nitrobenzene interactions with monometallic Ni/SiO2, Cu/SiO2 and Pd/SiO2, and with bimetallic CuNi/SiO2 and CuPd/SiO2 catalysts, both in the absence and presence of H-2, combined with density functional theory (DFT) calculations on selected bimetallic NiCu(111) and PdCu(111) models. The results obtained experimentally confirm that the reaction mechanism on non-noble metals such as Ni proceeds through N-O bond dissociation, generating nitrosobenzene intermediates, while, on noble metals, such as Pd, H-attack is necessary to activate the NO bond. Moreover, a bimetallic CuPd/SiO2 catalyst with a Pd enriched surface is prepared that exhibits an enhanced H-2 dissociation ability and a particular reactivity at the boundary between the two metals., This research was funded by Spanish Government through "Severo Ochoa" program (SEV2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE), RTI2018-099668-B-C21 (MINECO) and by Generalitat Valenciana through AICO/2017/153 Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spectroscopic insights into the role of CO2 on the nature of Cr species in a CrOX/Al2O3 catalysts during ethane dehydrogenation with CO2

  • Franceschini, Gustavo do N.
  • Schwaab, Marcio
  • Rangel, Maria do Carmo
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] The dehydrogenation of ethane with CO2 was studied on CrOx/Al2O3 catalysts (8 wt% of CrOx) in the 600-675 degrees C temperature range. The role of CO2 was determined by comparison with catalytic and spectroscopic data of ethane dehydrogenation without CO2. Characterization of fresh catalyst suggested an intimate interaction of Cr and support. Moreover, in situ Raman spectroscopic analysis combined with oS studies done on reaction exposed samples indicated changes in both the nature of active Cr species and the reaction mechanism depending on the reaction conditions (i.e., presence/absence of CO2, and the reaction temperature). At lower temperatures (600-625 degrees C), CO2 promotes the re-oxidation of Cr3+ to Cr6+ favoring the oxidative dehydrogenation (ODH) route. While at higher temperatures (650-675 degrees C), the reaction occurs mainly via a catalytic dehydrogenation mechanism, as CO2 is no longer capable of re-oxidizing Cr3+ to Cr6+, with CO2 inhibiting partially the formation of coke., The authors would like to acknowledge the Ministerio de Ciencia e Innovacion of Spain (projects PID2021-126235OB-C31, TED2021-130756B-C32 and the Generalitat Valenciana (project MFA/2022/016) for the financial support. The authors also acknowledge Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior - Brasil & nbsp;(CAPES/Print, UFRGS 2020) for the scholarship to G. do N. Franceschini.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chitosan-Silica as a Cheap Carrier and Green Soft Ligand for Improved Ru-catalyzed Hydroformylation

  • Escobar-Bedia, Francisco Javier
  • Sabater Picot, Mª José
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Martin-Diaconescu, Vlad
  • Simonelli, Laura
[EN] Dodecacarbonyltriruthenium Ru-3(CO)(12) has been immobilized onto a biopolymer (chitosan) supported on SiO2 (Ch@SiO2) to give Ru-Ch@SiO2. Ch@SiO2 behaves as a soft, recoverable and bulky ligand allowing the stabilization of released Ru active species and preventing its irreversible reduction to Ru-0. Under these conditions very high activity (TOF= 1086 h(-1); TON=2749) and regioselectivity (n:iso=92 : 8) are obtained, surpassing that of the homogeneous Ru-3(CO)(12) counterpart.Spectroscopic studies have shown that Ru-3(CO)(12) transforms into a mononuclear Run+ (n=2,3) di o try carbonyl species by interacting with the amido/amino groups of the biopolymer, being released into the reaction media whilst stabilized by the chitosan functional groups.The herein 0.5 Ru-Ch@SiO2 catalyst can operate be operated under a semi-continuous mode for at least 14 h without deactivation, representing providing a starting point in the search for a green catalyst with definitive industrial application in hydroformylations. In particular in the search for a heterogeneous catalyst away from the use of phosphines and their known drawbacks (i. e. tedious synthesis, facile oxidation of phosphor center, ..) as well as expensive Rh as active site., This research was funded by Ministerio de Ciencia, Innovacion y Universidades, Grants number RTI2018-099668-B-C21 and PGC2018-101247-B-100, and Generalitat Valenciana (GVA), AICO/2020/205. F.J.E.B acknowledges the Polytechnical University of Valencia for the economic support through the grant of an FPI scholarship associated with the PAID programme "Programa de Ayudas de Investigacion y Desarrollo". XAS experiments were performed at the BL22-CLAESS beamline at the ALBA Synchrotron with the collaboration of ALBA staff as part of projects 2019093692 and 2020024106.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Partial oxidation of methane and methanol on FeOx-, MoOx- and FeMoOx-SiO2 catalysts prepared by sol-gel method: A comparative study

  • Cortés Ortiz, William G.
  • Delgado-Muñoz, Daniel
  • Guerrero Fajardo, Carlos Alberto
  • Agouram, Said
  • Sanchís, Ruth
  • Solsona, Benjamín
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] FeOx-, MoOx and FeMoOx-SiO2 materials prepared by a sol-gel procedure have been evaluated as catalysts for the partial oxidation of methane and methanol. The effect of decreasing the pH of the synthesis gel on the chemical nature of FeOx and MoOx species has been investigated. Characterization results show that low pH improves the dispersion of metal oxide species present in SiO2 matrix. For FeOx/SiO2 materials, the presence of dispersed FeOx species (rather than bulk Fe2O3) improves the selectivity to formaldehyde in the partial oxidation of methane and methanol. For FeMoOx/SiOx catalysts, dispersed species favor the selectivity to formaldehyde only for methane oxidation. In contrast, for bimetallic FeMoOx/SiOx system, a better dispersion does not improve the selectivity to the aldehyde in methanol oxidation. In spite of the fact that the activation temperature for methane oxidation is remarkably higher than that for methanol oxidation, catalytic results show that the most active and selective catalysts for the partial oxidation of methane are also the most effective materials for the partial oxidation of methanol., The authors would like to acknowledge the MINECO in Spain (CRTl2018-099668-B-C21 and MAT2017-84118-C2-1-R projects) and Universidad Nacional de Colombia and Colciencias in Colombia for funding projects. Authors are grateful to the SCSIE, University of Valencia, for providing HR-TEM facility.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the selectivity to ethylene during ethane ODH over M1-based catalysts. A surface and electrochemical study

  • De Arriba-Mateos, Agustín
  • Sánchez, Ginebra
  • Sánchez-Tovar, Rita
  • Fernández-Domene, Ramón
  • Solsona, Benjamín
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] MoVO, MoVTeO and MoVTeNbO mixed oxides, prepared hydrothermally and heat-treated in N2 at 400, 500 or 600 degrees C, are active and selective catalysts in the oxidative dehydrogenation (ODH) of ethane, although their catalytic behaviour strongly depends on the composition and the activation temperature of the material. Thus, the selectivity to ethylene over samples heat-treated at 400 or 600 degrees C, decreases according to the following trend: MoVTeNb-600 > MoV-400 > MoVTe-600 > MoVTe-400 > MoVTeNb-400 >> MoV-600 (with catalysts heat -treated at 500 degrees C presenting an intermediate performance). This catalytic performance can be explained to a high extent by the presence of the M1 phase in the best catalysts. Interestingly, the temperature of formation and decomposition of the M1 phase strongly depends on the chemical composition of the catalysts, leading to different trends depending on the heat-treatment temperature. Not only the presence of the M1 phase determines the catalytic performance but also the V4+/V5+ ratio in the surface of catalysts. Additionally, a comprehensive brand-new electrochemical characterization of the catalysts has been carried out for MoV-based samples with M1 phase. Accordingly, the best catalytic behaviour in terms of selectivity to ethylene in the ethane ODH was observed in those materials presenting higher charge-transfer resistances at the interfacial active parts and n-type semiconductivity with few O-vacancies. Besides, lower current densities obtained in cyclic voltammetries (related to low electrochemical activity) has been associated with higher selectivity in the ODH reaction., The funding received from the Ministerio de Ciencia e Innovación of Spain, MINECO/FEDER (Projects: PID2021-126235OB-C31, PID2021-126235OB-C33, TED2021-130756B-C32 and TED2021-129555B-I00), for this study is acknowledged. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced NiO Dispersion on a High Surface Area Pillared Heterostructure Covered by Niobium Leads to Optimal Behaviour in the Oxidative Dehydrogenation of Ethane

  • Rodríguez-Castellón, Enrique
  • Delgado-Muñoz, Daniel
  • Dejoz, Ana
  • Vázquez, Isabel
  • Agouram, Said
  • Cecilia, Juan A.
  • Solsona, Benjamín
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A Nb-containing siliceous porous clay heterostructure (PCH) with Nb contents from 0 to 30 wt %) was prepared from a bentonite and used as support in the preparation of supported NiO catalysts with NiO loading from 15 to 80 wt %. Supports and NiO-containing catalysts were characterised by several physicochemical techniques and tested in the oxidative dehydrogenation (ODH) of ethane. The characterisation studies on Nb-containing supports showed the presence of well-anchored Nb(5+)species without the formation of Nb(2)O(5)crystals. High dispersion of nickel oxide with low crystallinity was observed for the Nb-containing PCH supports. In addition, when NiO is supported on these Nb-containing porous clays, it is more effective in the ODH of ethane (ethylene selectivity of ca. 90 %) than NiO supported on the corresponding Nb-free siliceous PCH or on Nb2O5(ethylene selectivities of ca. 30 and 60 %, respectively). Factors such as the NiO-Nb(5+)interaction, the NiO particle size and the properties of surface Ni(n+)species were shown to determine the catalytic performance., The authors would like to acknowledge the Ministerio de Ciencia, Innovacion y Universidades of Spain (CRTl2018-099668-B-C21, RTl2018-099668-B-C22 and MAT2017-84118-C2-1-R projects). Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

W-Nb-O oxides with tunable acid properties as efficient catalysts for the transformation of biomass-derived oxygenates in aqueous systems

  • Delgado-Muñoz, Daniel
  • García-González, Ester
  • Fernandez-Arroyo-Naranjo, Alberto
  • Domine, Marcelo Eduardo
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] W-Nb-O oxide bronzes, prepared hydrothermally, have been characterized and studied as catalysts for both the gas-phase dehydration of glycerol and the liquid-phase selective condensation of light oxygenates derived from primary treatments of biomass (a mixture containing acetic acid, ethanol, propanal, hydroxyacetone and water). By controlling the nominal composition of the catalysts, it is possible to tune their textural and acid properties (concentration and nature of acid sites) to selectively produce acrolein from glycerol or C-5-C-10 hydrocarbons (with low O contents and with high yields) from light oxygenates. Interestingly, these catalysts are stable when working in gas phase reactions and they are re-usable, with high resistance to leaching, when working in aqueous media., Financial support by the Spanish Government (CTQ-2015-68951-C3-1, CTQ-2015-67592, MAT2016-78362-C4-4-R and SEV-2016-0683) and Generalitat Valenciana (GVA, PROMETEO/2018/006) is gratefully acknowledged. A. F.-A. and D. D. thank the "La Caixa-Severo Ochoa" Foundation and Severo Ochoa Excellence Program (SVP-2016-0683), respectively, for their fellowships. The authors thank the ICTS Centro Nacional de Microscopia Electronica (UCM) for instrumental facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active and Regioselective Ru Single-Site Heterogeneous Catalystsfor Alpha-Olefin Hydroformylation

  • Escobar-Bedia, Francisco Javier
  • Sabater Picot, Mª José
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Lopez-Haro, Miguel
  • Calvino, Jose Juan
  • Martin-Diaconescu, Vlad
  • Simonelli, Laura
  • Pérez-Dieste, Virginia
[EN] A heterogeneous ruthenium catalyst consisting ofisolated single atoms and disordered clusters stabilized in a N-doped carbon matrix has been synthesized with very good activityand remarkable regioselectivity in the hydroformylation of 1-hexene. The role of the nitrogen heteroatoms has been probedessential to increase the catalyst stability and activity, enabling thestabilization of Ru(II)-N sites according to X-ray photoelectronspectroscopy (XPS) and XANES. Intrinsic size-dependent activityof Ru species of different atomicity has been extracted, correlatingthe observed reaction rate and the particle size distributiondetermined by means of aberration-corrected high-angle annulardark-field scanning transmission electron microscopy, permittingthe identification of single-atom sites as the most active ones. This catalyst appears as a promising alternative with respect to itsheterogeneous counterparts, paving the way for designing improved Ru heterogeneous catalysts., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities, through the "Severo Ochoa" Excellence Programme (SEV2016-0683) and RTI2018-099668-B-C21 and PGC2018101247-B-100 "Programa Estatal de Generacion de Conocimiento". P.C acknowledges the financial support from the "Generalitat Valenciana" through the project AICO/2020/205. HR-HAADF-STEM measurements were performed at the DME-UCA node of ELECMI ICTS with financial support from FEDER/MINECO (MAT2017-87579-R and PID2019110018GA-I00); XAS experiments were performed at the BL22-CLAESS beamline at the ALBA Synchrotron with the collaboration of ALBA staff as part of projects 2019093692 and 2020024106. XPS experiments were performed at the BL24CIRCE beamline at the ALBA Synchrotron with the collaboration of ALBA staff. J.E.B acknowledges the Polytechnical University of Valencia for the economic support through the grant of an FPI scholarship associated with the PAID programme "Programa de Ayudas de Investigacion y Desarrollo".
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tungsten-titanium mixed oxide bronzes: Synthesis, characterization and catalytic behavior in methanol transformation

  • Delgado Muñoz, Daniel
  • Soriano, M.D.
  • Solsona Espriú, Benjamín
  • Zamora Iranzo, Samuel Andrés
  • Agouram, Saïd
  • Concepción, Patricia
  • López Nieto, José Manuel
Tungsten oxide bronze-based materials show extremely adaptive structural and compositional features that make them suitable for functional properties modulation. Herein we report the preparation of a series of Ti-containing tungsten oxide catalysts presenting a hexagonal tungsten bronze-type structure. The insertion of Ti within the structure (likely in the octahedral framework of the hexagonal tungsten bronze) leads to an increase in the number of strong acid sites, and the disappearance of W surface species found in the undoped tungsten oxide. With the aim of studying the acid-redox properties of the titled catalysts, the catalytic transformation of methanol has been carried out in the presence and the absence of O in the feed. Both catalytic activity and the acid-redox properties of these catalysts are highly dependent on catalyst composition and reaction conditions applied (i.e. in the presence or in the absence O in the feed). Aerobic experiments show the depletion of the redox functionality (i.e. no formaldehyde detected in the products) when Ti is incorporated in the framework (i.e. 100% selectivity to dimethyl ether). On the other hand, all the catalysts show the loss of the redox function and a decrease in the catalytic activity when anaerobic conditions are used. In the absence of oxygen, the catalysts are still active in the dehydration of methanol to dimethyl ether, i.e. they maintain their acid functionality even when oxygen is not present in the feed. The results are discussed in terms of the available surface active sites present in each case., Authors would like to thank DGICYT in Spain for RTI2018-099668-B-C21, CTQ2015-68951-C3-1-R and MAT2017-84118-C2-1-R projects. Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). Finally, authors thank the Electron Microscopy Service of SCSIE of Universitat de València for their support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reflux-synthesized bulk and diluted W-Nb-O mixed oxide bronzes for the valorization of short-chain oxygenates aqueous mixtures

  • Delgado Muñoz, Daniel
  • Fernández-Arroyo Naranjo, Alberto
  • Salvia, N.L.
  • Dómine, Marcelo Eduardo
  • López Nieto, José Manuel
This work reports the preparation of bulk and KIT-6-diluted W-Nb-O mixed oxide bronzes by a reflux method. The influence of the incorporation of Nb and a mesoporous silica on the physicochemical features of the catalysts is studied. The addition of Nb favors the formation of single-phase oxide bronze structure, with improved Lewis acidity; while the incorporation of KIT-6 gives rise to well-dispersed mixed metal oxide particles on the diluter. These diluted W-Nb-O catalysts present enhanced surface areas and mesopore volumes. The materials have been tested in the valorization of an aqueous model mixture (acetol/propanal/ethanol/acetic acid/water weight ratio of 5/25/10/30/30), through C-C bond formation reactions. The increase in the Lewis nature of surface acid sites stands as the key point to maximize the total organic yield during the reaction (C-C products). The best catalysts maintain their catalytic behavior after five consecutive uses., Financial support by the Spanish Government (RTI2018-099668-B-C21, PGC2018-097277-B-100, and SEV-2016-0683) is gratefully acknowledged. DD and AF-A thank the Severo Ochoa Excellence Program (SVP-2014-068669) and the “La Caixa-Severo Ochoa” Foundation, respectively, for their fellowships. NS thanks “Conselho Nacional de Desenvolvimento Científico y Tecnológico (CNPq)” in Brasil. Authors are also grateful to the Electron Microscopy Service (Universitat Politècnica de València) for facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimizing Reflux Synthesis Method of Mo-V-Te-Nb mixed oxide Catalysts for Light Alkane Selective Oxidation

  • Massó Ramírez, A.
  • Ivars-Barceló, F.
  • López Nieto, José Manuel
The investigation here presented studies the effect of the synthesis temperature (from 80 to 110 °C) and the time (from 1 to 4 days) employed to precipitate catalyst precursors by reflux method, on the physic-chemical and the catalytic properties of the resulting Mo-V-Te-Nb mixed oxide catalysts for both propane partial oxidation into acrylic acid and ethane oxidative dehydrogenation (ODH) to ethylene. The insight obtained has allowed an important optimization of the not commonly used reflux method to prepare Mo-V-Te-Nb oxide materials with competitive catalytic performance. The yields achieved overcome those from optimized catalysts prepared by conventional hydrothermal method, and approach those reached with catalysts prepared using the “slurry method”. The optimum rise for the synthesis temperature is found as a key factor for the reflux method. It allows access to an increased vanadium content into the reflux precipitate, which favors the formation of a pseudo-amorphous Mo-V-Te-Nb oxometallate. This precipitate behaves as a precursor for the crystallization, during the solid-state activation step at high-temperature (600 °C/N), of the structure type (TeO)MO (M = Mo, V, Nb), key for the selective conversion of propane or ethane. On the other hand, for the optimum temperature of synthesis, i.e. 110 °C, higher synthesis time of the precursor leads to smaller crystal sizes in the final catalyst (higher specific surface areas) and lowers the average oxidation state of vanadium from V to V, which significantly enhances the catalytic behavior., Authors gratefully acknowledge the funds from DGICYT (Spain) by the project RTI2018-099668-B-C21, as well as the funds from Comunidad de Madrid by the project 2017-T1/IND-6025 within the program “Atracción y Retención de Talento Investigador” of the V PRICIT.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxidative dehydrogenation of ethane on diluted or promoted nickel oxide catalysts: Influence of the promoter/diluter

  • Delgado Muñoz, Daniel
  • Solsona, Benjamín
  • Sanchis, Rut
  • Rodríguez, E.
  • López Nieto, José Manuel
Ti- and Nb- containing NiO catalysts have been synthesized by two different preparation methods: i) by precipitation (Me-Ni-O oxides, Me = Nb or Ti), in order to prepare promoted NiO catalysts; and ii) by wet impregnation on TiO or NbO supports, in order to prepare diluted/supported NiO catalysts. The catalysts have been also characterized and tested in the oxidative dehydrogenation of ethane. The catalytic performance of Ti- and Nb-promoted catalysts strongly depends on the composition, although in both cases the optimal one is found at similar Ti or Nb loadings (ca. 90 wt% NiO), showing similar ethylene selectivity in the ODH of ethane (ca. 90% at 10–20% ethane conversion). However, in the case of diluted catalysts, the catalytic behavior of Ti- and Nb-containing catalysts is drastically different. Then, over TiO-diluted NiO catalyst, the highest selectivity to ethylene (ca. 90% selectivity) is achieved at NiO loading of 20 wt.%. However, over NbO-diluted NiO catalyst, selectivity to ethylene was lower than 70%. A discussion on the characteristics of selective catalysts is done. In this case, the best catalysts must present a low concentration of free NiO and TiO or NbO phases, maximizing the Ni-O-Ti or Ni-O-Nb interaction. Interestingly, this takes place at different NiO loading depending on the preparation method and the nature of promoted/diluter. The low selectivity to ethylene achieved by NiO diluted with NbO has been related to the low interaction of NiO with the surface of NbO, which hinders the elimination of unselective electrophilic O species., The authors would like to acknowledge the DGICYT in Spain (CRTl2018-099668-B-C21 and RTl2018-099668-B-C22 and MAT2017-84118-C2-1-R projects). Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ce-modified zeolite BEA catalysts for the trichloroethylene oxidation. The role of the different and necessary active sites

  • Kinga Gołąbek
  • Palomares Gimeno, Antonio Eduardo
  • Martínez Triguero, Joaquín
  • Tarach, K.A.
  • Krzysztof Kruczała
  • Gora-Marek, K.
This paper reports the activity of different Ce-BEA zeolites for the catalytic oxidation of trichloroethylene and it is focused on determining the nature of the catalyst active sites. The study was made by using a microporous zeolite BEA, two types of desilicated BEA zeolites and mildly steamed desilicated BEA zeolites. The catalysts were prepared by introducing Ce to the zeolites with incipient wetness impregnation and their structural, textural, and acidic properties were established. The evolution of TCE conversion was correlated with the physicochemical properties of the zeolites. It is shown that highly developed mesopore surface area, well-dispersed cerium species and a high number of Brønsted sites results in the highest activity. The activity and selectivity of the Ce-loaded zeolites were found to be dependent on the number of high strength Brønsted acid centres. The hierarchical materials with a higher density of hydroxyls showed higher yields to HCl while the formation of chlorine was prevented., The work was financed by the Grant No. <GN1>2015/18/E/ST4/00191 from the N</GN1>ational Science Centre, Poland. J.M-T. and A.E.P thank Spanish Governmentthrough “Severo Ochoa” <GN2>SEV-2016-0683, <GN2>RTI2018-099668-B-C21, <GN2>RTI2018-101784-B-I00 and the F</GN2></GN2></GN2>undación Ramón Arecesthrough a research contract of the “Life and Materials Science” program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Partial oxidation of methane and methanol on FeOx-, MoOx- and FeMoOx -SiO2 catalysts prepared by sol-gel method: A comparative study

  • Cortés Ortiz, W.G.
  • Delgado Muñoz, Daniel
  • Guerrero Fajardo, C.A.
  • Agouram, Saïd
  • Sanchis, Rut
  • Solsona, Benjamín
  • López Nieto, José Manuel
FeOx-, MoOx and FeMoOx-SiO materials prepared by a sol-gel procedure have been evaluated as catalysts for the partial oxidation of methane and methanol. The effect of decreasing the pH of the synthesis gel on the chemical nature of FeOx and MoOx species has been investigated. Characterization results show that low pH improves the dispersion of metal oxide species present in SiO matrix. For FeOx/SiO materials, the presence of dispersed FeOx species (rather than bulk FeO) improves the selectivity to formaldehyde in the partial oxidation of methane and methanol. For FeMoOx/SiOx catalysts, dispersed species favor the selectivity to formaldehyde only for methane oxidation. In contrast, for bimetallic FeMoOx/SiOx system, a better dispersion does not improve the selectivity to the aldehyde in methanol oxidation. In spite of the fact that the activation temperature for methane oxidation is remarkably higher than that for methanol oxidation, catalytic results show that the most active and selective catalysts for the partial oxidation of methane are also the most effective materials for the partial oxidation of methanol., The authors would like to acknowledge the MINECO in Spain (CRTl2018-099668-B-C21 and MAT2017-84118-C2-1-R projects) and Universidad Nacional de Colombia and Colciencias in Colombia for funding projects. Authors are grateful to the SCSIE, University of Valencia, for providing HR-TEM facility.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the Nature of the Promoter in NiO Catalysts on the Selectivity to Olefin During the Oxidative Dehydrogenation of Propane and Ethane

  • Delgado Muñoz, Daniel
  • Sanchis, Rut
  • Solsona, Benjamín
  • Concepción, Patricia
  • López Nieto, José Manuel
A comparative study of the catalytic properties for the oxidation of C-C alkanes and olefins has been carried out over unpromoted and M-promoted NiO catalysts (Me = K, La, Ce, al, Zr, Sn, Nb). The catalysts have been characterized by several physico-chemical techniques (UV Raman, Visible Raman, FTIR of adsorbed CO and XPS). The characteristics of promoter elements are of paramount importance, since they are able to modify both the nature of the active nickel and the concentration of electrophilic O/O oxygen species. Thus, a relatively high acidity and valence of the promoter oxide (with oxidation state higher than + 3) are necessary to achieve high selectivity to olefins during the oxidative dehydrogenation (ODH) of C–C alkanes. In addition, an inverse correlation between the selectivity to the corresponding olefin and the concentration of electrophilic oxygen species has been observed, although the selectivity to propene during propane ODH is lower than the selectivity to ethylene achieved during ethane ODH. On the other hand, a very low influence of alkane conversion on the selectivity to the corresponding olefins is observed. This behaviour can be explained by considering that the reaction rate for olefin combustion is lower than the reaction rate for alkane oxidation. However, the comparative study of the oxidation of alkanes and olefins suggest that the differences observed between the ODH of propane and ethane are not related to the reactivity of olefins, but to the different number and reactivity of C–H bonds in both alkanes. A discussion on the importance of the concentration of active sites and the characteristics of the alkanes fed on the selectivity to olefin during the alkane ODH is also presented., The authors would like to acknowledge the Ministerio de Ciencia, Innovación y Universidades of Spain (RTl2018- 099668-B-C21 and MAT2017-84118-C2-1-R projects) and FEDER. Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced NiO Dispersion on a High Surface Area Pillared Heterostructure Covered by Niobium Leads to Optimal Behaviour in the Oxidative Dehydrogenation of Ethane

  • Rodríguez-Castellón, Enrique
  • Delgado Muñoz, Daniel
  • Dejoz, Ana
  • Vázquez, Isabel
  • Agouram, Saïd
  • Cecilia, Juan Antonio
  • Solsona, Benjamín
  • López Nieto, José Manuel
A Nb-containing siliceous porous clay heterostructure (PCH) with Nb contents from 0 to 30 wt %) was prepared from a bentonite and used as support in the preparation of supported NiO catalysts with NiO loading from 15 to 80 wt %. Supports and NiO-containing catalysts were characterised by several physicochemical techniques and tested in the oxidative dehydrogenation (ODH) of ethane. The characterisation studies on Nb-containing supports showed the presence of well-anchored Nb species without the formation of NbO crystals. High dispersion of nickel oxide with low crystallinity was observed for the Nb-containing PCH supports. In addition, when NiO is supported on these Nb-containing porous clays, it is more effective in the ODH of ethane (ethylene selectivity of ca. 90 %) than NiO supported on the corresponding Nb-free siliceous PCH or on NbO (ethylene selectivities of ca. 30 and 60 %, respectively). Factors such as the NiO–Nb interaction, the NiO particle size and the properties of surface Ni species were shown to determine the catalytic performance., The authors would like to acknowledge the Ministerio de Ciencia, Innovación y Universidades of Spain (CRTl2018‐099668‐B‐C21, RTl2018‐099668‐B‐C22 and MAT2017‐84118‐C2‐1‐R projects). Authors from ITQ also thank Project SEV‐2016‐0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP‐2014‐068669).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tungsten-niobium oxide bronzes: a bulk and surface structural study

  • Delgado Muñoz, Daniel
  • Concepción, Patricia
  • Trunschke, Annette
  • López Nieto, José Manuel
Materials from the WO-NbOsystem, presenting bronze-type crystal structures, display outstanding functional properties for several applications as thermoelectric materials, lithium-ion battery electrodes, or catalysts. In this work, a series of W-Nb-O oxide bronzes have been synthesized by the hydrothermal method (with Nb/(W + Nb) ratios in the range of 0-1). A combination of bulk and surface characterisation techniques has been applied to get further insights into: (i) the effect of thermal treatments on as-prepared materials and (ii) the surface chemical nature of W-Nb-O oxide bronzes. Thermal treatments promote the following structural changes: (i) loss of emerging long-range order and (ii) the elimination of NHand HO species from the structural channels of the as-synthesized materials. It has been observed that W-Nb-O bronzes with Nb at% ofca.50% are able to retain a long-range order after heat-treatments, which is attributed to the presence of a Cs[WNbO]-type structure. Increasing amounts of Nbin the materials (i) promote a phase transition to pseudocrystalline phases ordered along thec-axis; (ii) stabilize surface Wspecies (elucidated by XPS); and (iii) increase the proportion of surface Lewis acid sites (as determined by the FTIR of adsorbed CO). Results suggest that pseudocrystalline oxides (with a Nb at% ≥ 50%) are closely related to NbOpentagonal bipyramid-containing structures. The stabilisation of Lewis acid sites on these pseudocrystalline materials leads to a higher yield of heavy compounds, at the expense of acrolein formation, in the gas-phase dehydration of glycerol., The authors would like to acknowledge the Ministerio de Ciencia, Innovación y Universidades in Spain for the financial support (RTI2018-099668-B-C21 and SEV-2016-0683 projects), and the Electron Microscopy Service at Universitat Politècnica de València for providing facilities and technical support. D. D. also thanks Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the ZrO2 Crystalline Phases on the Nature ofActive Sites in PdCu/ZrO2 Catalysts for the Methanol Steam Reforming Reaction—An In Situ Spectroscopic Study

  • Ruano, Daniel
  • Pabón, Beatriz M.
  • Azenha, Cátia
  • Mateos-Predrero, Cecilia
  • Mendes, Adélio
  • Pérez-Dieste, Virginia
  • Concepción, Patricia
In this work, the electronic properties of the metal sites in cubic and monoclinic ZrO2 supported Pd and PdCu catalysts have been investigated using CO as probe molecule in in-situ IR studies, and the surface composition of the outermost layers has been studied by APXPS (Ambient Pressure X-ray Photoemission Spectroscopy). The reaction products were followed by mass spectrometry, making it possible to relate the chemical properties of the catalysts under reaction conditions with their selectivity. Combining these techniques, it has been shown that the structure of the support (monoclinic or cubic ZrO2) affects the metal dispersion, mobility, and reorganization of metal sites under methanol steam reforming (MSR) conditions, influencing the oxidation state of surface metal species, with important consequences in the catalytic activity. Correlating the mass spectra of the reaction products with these spectroscopic studies, it was possible to conclude that electropositive metal species play an imperative role for high CO2 and H2 selectivity in the MSR reaction (less CO formation), The research leading to these results has received funding from European Research council project SYNCATMATCH (671093) and from Spanish Ministry of Science, Innovation and Universities with the project “I + D + I research challenges (RTI2018-099668-B-C21)”. This work also was financially supported by: Base Funding-UIDB/00511/2020 of the Laboratory for Process Engineering, Environment, Biotechnology and Energy—LEPABE-funded by national funds through the FCT/MCTES (PIDDAC); European Union’s Seventh Framework Program (FP/2007-2013) for the Fuel Cells and Hydrogen Joint Technology Initiative under grant agreement no. 303476., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Precursors of tetragonal tungsten bronzes as catalysts in selective reactions: Liquid phase oxidation of diphenyl sulfide and gas phase oxidation of hydrogen sulfide

  • Egusquiza, María G.
  • Soriano, M.D.
  • Muñoz, Mercedes
  • Romanelli, Gustavo
  • Soriano, José
  • Cabello, Carmen I.
  • López Nieto, José Manuel
Mixed metal oxides, of the type (KNaM)PWVNbO and (NH)/(Na)PWVNbO, were prepared by hydrothermal synthesis from lacunary heteropolytungstates, [M(HO)(PWO)] (MPW, with M = Co, Cu or Mn) and their precursor NaH(PWO) (NaPW), chemically modified by Nb and V. For comparison mixed metal oxides were also synthesized by using a Keggin heteropolytungstates [PWO] as tungsten precursor. The pristine samples were finally heat-treated at 500 °C in flowing N for 2 h. The resulting mixed metal oxides were characterized by several physico-chemical techniques and tested in both the liquid phase catalytic oxidation of diphenyl sulfide (DPS), in friendly environmental conditions (using tert-butyl hydroperoxide as oxidant), and in the gas phase partial oxidation of hydrogen sulfide to sulfur (using air at oxidant). Although the catalytic behavior of these catalysts strongly depends on the composition of catalysts, high activity and selectivity have been achieved over mixed metal oxides in both reactions. The good catalytic performance of species containing Cu was evidenced in both reactions studied and the reactivity of this element could be explained by its structural and vibrational spectroscopic properties., MGE, MM, CIC and GR thank the financial support by CICPBA Project and UNLP Project 1207, JMLN, MDS and JS thank the financial support by the Spanish Government (Project RTI2018-099668-B-C21). JS also thanks Spanish Goverment fellowship (PRE2019-087432)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combined spectroscopic and computational study of nitrobenzene activation on non-noble metals-based mono-and bimetallic catalysts

  • Millán, Reisel
  • Soriano, M.D.
  • Cerdá Moreno, Cristina
  • Boronat, Mercedes
  • Concepción, Patricia
In this paper, substituted anilines are industrially obtained by direct hydrogenation of nitroaromatic compounds with molecular H2 using metals as catalysts. Previous theoretical studies proposed that the mechanism of the reaction depends on the nature of the metal used as a catalyst, and that rationally designed bimetallic materials might show improved catalytic performance. Herein, we present IR spectroscopic studies of nitrobenzene interactions with monometallic Ni/SiO2, Cu/SiO2 and Pd/SiO2, and with bimetallic CuNi/SiO2 and CuPd/SiO2 catalysts, both in the absence and presence of H2, combined with density functional theory (DFT) calculations on selected bime-tallic NiCu(111) and PdCu(111) models. The results obtained experimentally confirm that the reaction mechanism on non-noble metals such as Ni proceeds through N-O bond dissociation, generat-ing nitrosobenzene intermediates, while, on noble metals, such as Pd, H-attack is necessary to acti-vate the NO bond. Moreover, a bimetallic CuPd/SiO2 catalyst with a Pd enriched surface is prepared that exhibits an enhanced H2 dissociation ability and a particular reactivity at the boundary between the two metals., This research was funded by Spanish Government through “Severo Ochoa” program (SEV- 2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE), RTI2018-099668-B-C21 (MINECO) and by Generalitat Valenciana through AICO/2017/153 Project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evolution of the optimal catalytic systems for the oxidative dehydrogenation of ethane: The role of adsorption in the catalytic performance

  • de Arriba, Agustín
  • Solsona, Benjamín
  • Dejoz, Ana M.
  • Concepción, Patricia
  • Homs, Narcís
  • Ramírez de la Piscina, Pilar
  • López Nieto, José Manuel
Three samples that correspond to the evolution of optimal catalytic systems for the oxidative dehydrogenation of ethane have been synthesized and compared in terms of catalytic behavior and adsorption properties: (i) vanadium oxide supported on alumina, (ii) Sn-promoted NiO, and (iii) multicomponent MoVTeNbO with the M1 structure. The main difference in catalytic performance lies in the extent of the overoxidation of the ethylene formed, following the order VOx/Al2O3 > NiSnOx > MoVTeNb-M1. Accordingly, the selectivity to ethylene at medium and high ethane conversion follows the order MoVTeNb-M1 > NiSnOx > VOx/Al2O3. These results are confirmed by the relative reaction rates observed for the oxidation of ethane and the oxidation of ethylene. Microcalorimetry studies indicate that the heat of adsorption of both ethane and ethylene is the highest in the most selective MoVTeNb-M1 sample. Thus, the low olefin decomposition in the MoVTeNb-M1 catalyst is not due to weaker adsorption of ethylene but to the reduced ability of its active sites to activate ethylene. The same conclusion regarding the MoVTeNb-M1 catalyst can be drawn by FT-IR of adsorbed ethylene. On the other hand, NiSnOx active sites present a high overoxidation ability, as demonstrated by the notorious formation of oxygenated species, precursors of COx. However, the ethylene decomposition is rather mild because of the existence of many free Lewis sites not involved in the overoxidation reaction. In contrast, in the case of the VOx/Al2O3 catalyst, almost all active sites are involved in the oxidation path, so that the olefins decompose readily., The authors acknowledge the Spanish Ministry of Science, Innovation and Universities (MCIU) for their funding (RTl2018-099668-B-C21, MAT2017-84118-C2-1-R and MAT2017-87500-P) and FEDER. The authors from ITQ also thank Programa Severo Ochoa (SEV-2016-0683). A.A. acknowledges the Severo Ochoa Excellence Program for his grant (BES-2017-080329)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CuZnAl hydrotalcites as suitable precursors for chromium-free ester hydrogenolysis catalysts

  • Aubrecht, Jaroslav
  • Pospelova, Violetta
  • Martínez, Agustín
  • Concepción, Patricia
  • Kikhtyanin, Oleg
  • Straka, Petr
  • Kubicka, David
Ester hydrogenolysis is industrially performed over Adkins catalysts. Their use is being restricted as they contain environmentally unfriendly CrO. As a potential replacement, five co-precipitated CuZnAl catalysts with various Cu/Zn and Al/(Cu+Zn) atomic ratios were studied. The structure transformation during the whole catalyst lifecycle was determined. The catalyst precursors consisted of CuZnAl-hydrotalcite (HTC). Although the Cu/Zn ratio did not affect the HTC structure, an increase in Al content resulted in smaller Cu nanoparticles with a larger surface area. In the reduced catalysts, both Cu and Cu species were identified using FTIR-CO. XPS revealed catalyst surface reconstruction after catalyst reduction and catalytic reaction. The evaluation of the catalysts in dimethyl adipate hydrogenolysis indicated that the catalyst having the lowest Cu loading possessed the highest activity, due to its high S and Cu/Zn = 1. Generally, higher activity was achieved by reducing the Cu/Zn and increasing the Al/(Cu+Zn) ratios., Financial support from Czech Science Foundation (project No. GA17–05704S and GA20–28093S) is greatly acknowledged. The catalyst precursors were prepared with support of CATPRO infrastructure. Experimental results were accomplished by using Large Research Infrastructure ENREGAT supported by the Ministry of Education, Youth and Sports of the Czech Republic under project no. LM2018098. P.C. and A.M. acknowledge financial support from the Spanish Government through the RTI2018–099668-B-C21 and RTI2018–102161 projects. The authors are grateful to the Microscopy Service of the Universitat Politècnica de València (UPV) for assistance in microscopy characterization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cu-Ga3+-doped wurtzite ZnO interface as driving force for enhanced methanol production in co-precipitated Cu/ZnO/Ga2O3 catalysts

  • Cored, Jorge
  • Lopes, Christian W.
  • Liu, Lichen
  • Soriano, José
  • Agostini, Giovanni
  • Solsona, Benjamín
  • Sánchez-Tovar, Rita
  • Concepción, Patricia
A detailed understanding of the interactions among the active components in gallium promoted Cu/ZnO catalysts, depending on the speciation of the gallium, are reported using in situ/operando spectroscopic studies, and their effect in the CO hydrogenation to methanol unraveled. In this contribution, the promoting effect of Ga-doped in the wurtzite ZnO lattice of a Cu/ZnO/GaO catalyst is compared to that of a zinc gallate (ZnGaO) phase. Remarkably, a strong inhibition of CO formation, together with an enhanced methanol formation, are observed in the Ga-doped ZnO sample, specifically at conditions where the competitive reverse water gas shift reaction predominates. The catalytic performance has been correlated with the microstructure of the catalyst where a surface enrichment with reduced ZnO species, together with the stabilization of positive charged copper species and an increase in the amount of surface basic sites for CO adsorption are observed on the most selective sample., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through “Severo Ochoa” Excellence Programme (SEV-2016-0683) and through RTI2018-099668-B-C21 project. The authors thank the Microscopy Service of UPV for kind help on measurements. J.C. thanks the Spanish Government (MINECO) for a “Severo Ochoa” grant (BES-2015-075748). C.W.L. (Science without Borders-Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship. Authors from UV acknowledge the Spanish Ministry of Science, Innovation and Universities through the project MAT2017-84118-C2-1-R. Authors thank to the support of HZB/Bessy II (ISISS beamline) and ALBA Synchrotron (BL22-CLÆSS) staff for the successful performance of the measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Methanol Production over Non-promoted Cu-MgO-Al2O3Materials with Ex-solved 2 nm Cu Particles: Insights from an Operando Spectroscopic Study

  • Cored, Jorge
  • Mazarío, Jaime
  • Cerdá Moreno, Cristina
  • Lustemberg, Pablo G.
  • Ganduglia-Pirovano, M. V.
  • Dómine, Marcelo Eduardo
  • Concepción, Patricia
Enhanced methanol production is obtained over a non-promoted Cu-MgO-Al2O3 mixed oxide catalyst derived from a Cu-Mg-Al hydrotalcite precursor (HT) containing narrowly distributed small Cu NPs (2 nm). Conversions close to the equilibrium (∼20%) with a methanol selectivity of 67% are achieved at 230 °C, 20 bar, and a space velocity of 571 mL·gcat-1·h-1. Based on operando spectroscopic studies, the striking activity of this Cu-based catalyst is ascribed to the stabilization of Cu+ ions favored under reaction conditions due to lattice reorganization associated with the "HT-memory effect"promoted by water. Temperature-resolved infrared-mass spectrometry experiments have enabled the discernment of monodentate formate species, stabilized on Cu+ as the intermediate in methanol synthesis, in line with the results of density functional theory calculations. These monodentate formate species are much more reactive than bridge formate species, the latter ones behaving as intermediates in methane and CO formation. Moreover, poisoning of the Cu0 surface by strongly adsorbed species behaving as spectators is observed under reaction conditions. This work presents a detailed spectroscopic study highlighting the influence of the reaction pressure on the stabilization of active surface sites, and the possibility of enhancing methanol production on usually less active non-promoted nano-sized copper catalysts, provided that the proper support is selected, allowing the stabilization of doped Cu+. Thus, a methanol formation rate of 2.6 × 10-3 molMeOH·gcat-1·h-1 at 230 °C, 20 bar, and WHSV = 28 500 mL·gcat-1·h-1 is obtained on the Cu-MgO-Al2O3 HT-derived catalyst with 71% methanol selectivity, compared to 2.2 × 10-4 molMeOH·gcat-1·h-1 with 54% methanol selectivity obtained on a reference Cu/(Al2O3/MgO) catalyst not derived from a HT structure., The research leading to these results received funding from the Spanish Ministry of Science, Innovation and Universities through “Severo Ochoa” Excellence Programme (SEV-2016-0683) and through the RTI2018-099668-B-C21 and RTI2018-101604-B-I00 projects. The authors also thank the Microscopy Service of UPV for kind help on measurements. J.C. thanks the Spanish Government (MINECO) for a “Severo Ochoa” grant (BES-2015-075748). J.M. thanks the MICINN (CTQ2015-67592) for his Ph.D. scholarship. M.E.D. thanks financial support by the Spanish Government (PGC2018-097277-B100). P.G.L. thanks the CSIC for the extension of the MSCA-IF Grant Agreement no. 832121. Computer time provided by the RES (Red Española de Supercomputación) resources at Mare Nostrum 4 (BSC, Barcelona) and La Palma (IAC, La Palma) nodes is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Active and Regioselective Ru Single-Site Heterogeneous Catalysts for Alpha-Olefin Hydroformylation

  • Escobar Bedia, Francisco Javier
  • Lopez-Haro, Miguel
  • Calvino, Jose J.
  • Martin-Diaconescu, Vlad
  • Simonelli, Laura
  • Pérez-Dieste, Virginia
  • Sabater Picot, María José
  • Concepción, Patricia
  • Corma, Avelino
A heterogeneous ruthenium catalyst consisting of isolated single atoms and disordered clusters stabilized in a N-doped carbon matrix has been synthesized with very good activity and remarkable regioselectivity in the hydroformylation of 1-hexene. The role of the nitrogen heteroatoms has been probed essential to increase the catalyst stability and activity, enabling the stabilization of Ru(II)-N sites according to X-ray photoelectron spectroscopy (XPS) and XANES. Intrinsic size-dependent activity of Ru species of different atomicity has been extracted, correlating the observed reaction rate and the particle size distribution determined by means of aberration-corrected high-angle annular dark-field scanning transmission electron microscopy, permitting the identification of single-atom sites as the most active ones. This catalyst appears as a promising alternative with respect to its heterogeneous counterparts, paving the way for designing improved Ru heterogeneous catalysts., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities, through the “Severo Ochoa” Excellence Programme (SEV-2016-0683) and RTI2018-099668-B-C21 and PGC2018-101247-B-100 “Programa Estatal de Generación de Conocimiento”. P.C acknowledges the financial support from the “Generalitat Valenciana” through the project AICO/2020/205. HR-HAADF-STEM measurements were performed at the DME-UCA node of ELECMI ICTS with financial support from FEDER/MINECO (MAT2017-87579-R and PID2019-110018GA-I00); XAS experiments were performed at the BL22-CLÆSS beamline at the ALBA Synchrotron with the collaboration of ALBA staff as part of projects 2019093692 and 2020024106. XPS experiments were performed at the BL24-CIRCE beamline at the ALBA Synchrotron with the collaboration of ALBA staff. J.E.B acknowledges the Polytechnical University of Valencia for the economic support through the grant of an FPI scholarship associated with the PAID programme “Programa de Ayudas de Investigación y Desarrollo”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evolution of the optimal catalytic systems for the oxidative dehydrogenation of ethane: The role of adsorption in the catalytic performance

  • de Arriba, Agustín
  • Solsona Espriú, Benjamín
  • Dejoz, Ana M.
  • Concepción, Patricia
  • Homs, Narcís
  • Ramírez de la Piscina, Pilar
  • López Nieto, José Manuel
Three samples that correspond to the evolution of optimal catalytic systems for the oxidative dehydrogenation of ethane have been synthesized and compared in terms of catalytic behavior and adsorption properties: (i) vanadium oxide supported on alumina, (ii) Sn-promoted NiO, and (iii) multicomponent MoVTeNbO with the M1 structure. The main difference in catalytic performance lies in the extent of the overoxidation of the ethylene formed, following the order VOx/AlO > NiSnOx > MoVTeNb-M1. Accordingly, the selectivity to ethylene at medium and high ethane conversion follows the order MoVTeNb-M1 > NiSnOx > VOx/AlO These results are confirmed by the relative reaction rates observed for the oxidation of ethane and the oxidation of ethylene. Microcalorimetry studies indicate that the heat of adsorption of both ethane and ethylene is the highest in the most selective MoVTeNb-M1 sample. Thus, the low olefin decomposition in the MoVTeNb-M1 catalyst is not due to weaker adsorption of ethylene but to the reduced ability of its active sites to activate ethylene. The same conclusion regarding the MoVTeNb-M1 catalyst can be drawn by FT-IR of adsorbed ethylene. On the other hand, NiSnOx active sites present a high overoxidation ability, as demonstrated by the notorious formation of oxygenated species, precursors of CO. However, the ethylene decomposition is rather mild because of the existence of many free Lewis sites not involved in the overoxidation reaction. In contrast, in the case of the VO/AlO catalyst, almost all active sites are involved in the oxidation path, so that the olefins decompose readily., The authors acknowledge the Spanish Ministry of Science, Innovation and Universities (MCIU) for their funding (RTl2018-099668-B-C21, MAT2017-84118-C2-1-R and MAT2017-87500-P) and FEDER. The authors from ITQ also thank Programa Severo Ochoa (SEV-2016-0683). A.A. acknowledges the Severo Ochoa Excellence Program for his grant (BES-2017-080329).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of the performance of bulk NiO catalyst in the oxidative dehydrogenation of ethane by tuning the synthesis parameters

  • Abdelbaki, Yousra
  • de Arriba, Agustín
  • Issaadi, Rachid
  • Sánchez-Tovar, Rita
  • Solsona, Benjamín
  • López Nieto, José Manuel
Highly stable and selective bulk NiO catalysts have been synthesized for the oxidative dehydrogenation (ODH) of ethane to ethylene. Interestingly, by optimizing synthesis parameters such as the amount of oxalic acid in the synthesis gel and the calcination temperature, undoped NiO catalysts have shown a consistent selectivity to ethylene of ca. 75%. The optimal catalyst requires the presence of a certain amount of oxalic acid in the synthesis gel and a final calcination at low temperatures (i.e. 350 °C). These catalysts have been deeply characterized by means of XRD, TPR, HRTEM, Raman and UV–vis diffuse reflectance spectroscopies, XPS and Electrochemical Impedance Spectroscopy measurements and tested in the ethane ODH. A novel electrochemical study has been undertaken, showing the p-character of all the NiO catalysts synthesized but differing in their capacitance values and density of cationic vacancies. The catalytic performance of NiO catalysts has been explained in terms of the different physicochemical properties (including changes in the number of vacancies) of the samples and the isolation of electrophilic oxygen species., Authors would like to acknowledge the Ministerio de Ciencia, Innovación y Universidades in Spain through projects CRTl2018-099668-B-C21 and MAT2017-84118-C2-1-R. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329). Y.A. and R.I. thank the Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chitosan-Silica as a Cheap Carrier and Green Soft Ligand for Improved Ru-catalyzed Hydroformylation

  • Escobar-Bedia, Francisco Javier
  • Martin-Diaconescu, Vlad
  • Simonelli, Laura
  • Sabater Picot, María José
  • Concepción, Patricia
Dodecacarbonyltriruthenium Ru(CO) has been immobilized onto a biopolymer (chitosan) supported on SiO (Ch@SiO) to give Ru−Ch@SiO. Ch@SiO behaves as a soft, recoverable and bulky ligand allowing the stabilization of released Ru active species and preventing its irreversible reduction to Ru. Under these conditions very high activity (TOF= 1086 h; TON=2749) and regioselectivity (n:iso=92 : 8) are obtained, surpassing that of the homogeneous Ru(CO) counterpart. Spectroscopic studies have shown that Ru(CO) transforms into a mononuclear Ru (n=2,3) di o try carbonyl species by interacting with the amido/amino groups of the biopolymer, being released into the reaction media whilst stabilized by the chitosan functional groups. The herein 0.5 Ru-Ch@SiO catalyst can operate be operated under a semi-continuous mode for at least 14 h without deactivation, representing providing a starting point in the search for a green catalyst with definitive industrial application in hydroformylations. In particular in the search for a heterogeneous catalyst away from the use of phosphines and their known drawbacks (i. e. tedious synthesis, facile oxidation of phosphor center,.) as well as expensive Rh as active site., This research was funded by Ministerio de Ciencia, Innovación y Universidades, Grants number RTI2018-099668-B-C21 and PGC2018-101247-B-100, and Generalitat Valenciana (GVA), AICO/2020/205. F.J.E.B acknowledges the Polytechnical University of Valencia for the economic support through the grant of an FPI scholarship associated with the PAID programme “Programa de Ayudas de Investigación y Desarrollo”. XAS experiments were performed at the BL22-CLÆSS beamline at the ALBA Synchrotron with the collaboration of ALBA staff as part of projects 2019093692 and 2020024106.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Te-doped MoV-Oxide (M1 phase) for ethane ODH. The role of tellurium on morphology, thermal stability and catalytic behaviour

  • de Arriba, Agustín
  • Solsona, Benjamín
  • García-González, Ester
  • Concepción, Patricia
  • López Nieto, José Manuel
Undoped and Te-doped MoV-Oxide (M1 phase) catalysts have been prepared hydrothermally (Te/Mo ratio in the synthesis gel from 0 to 0.17; and heat-treated at 400 or 600°C in N atmosphere), characterized by several physicochemical techniques and tested in the oxidative dehydrogenation (ODH) of ethane. The morphology and microporosity of the catalysts, the nature of V-species on the catalyst surface and the catalytic performance strongly depend on the composition and the heat-treatment temperature. When calcined at 400°C, the selectivity to ethylene decreases when the amount of tellurium increases, whereas when heat treated at 600°C, the selectivity to ethylene increases when the Te-loading increases. These trends have been explained on the basis of the good correlation between selectivity to ethylene and the concentration of V species on the surface of catalysts, in which the most selective catalyst is that prepared with a Te/Mo ratio of 0.17 and heat-treated at 600°C., The authors would like to thank the Spanish Ministry of Economy and Competitiveness for funding the projects (MINECO/FEDER): CRTl2018-099668-B-C21, PID2019-106662RBC44, MAT2017-84118-C2-1-R and SEV-2016-0683. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329). Authors would also like to acknowledge the “A-Team” of the ITQ (Dr. Miguel Palomino, Dr. Susana Valencia and Prof. Fernando Rey) for their assistance in the performance of the adsorption experiments.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of polymer protected Pd–Ag/ZnO catalysts for phenylacetylene hydrogenation

  • Zharmagambetova, Alima
  • Auyezkhanova, Assemgul
  • Talgatov, Eldar
  • Jumekeyeva, Aigul
  • Buharbayeva, Farida
  • Akhmetova, Sandugash
  • Myltykbayeva, Zhannur
  • López Nieto, José Manuel
A simple and environmentally friendly method, based on sequential adsorption of polyacrylamide (PAM) and transition metal ions (Pd, Ag) on zinc oxide precipitated from water solution, was used to synthesize supported mono- and bimetallic catalysts with various Pd:Ag ratios. The catalyst characterization results indicated that PAM and metal ions are completely adsorbed by zinc oxide, forming polymer-stabilized Pd and Ag nanoparticles of 1–3 nm in size, evenly distributed on the support surface. The catalysts were studied in the hydrogenation of phenylacetylene under mild conditions (0.1 MPa, 40 °C). Although Ag-free 1%Pd-PAM/ZnO catalyst presents an interesting catalytic performance (in terms of activity, selectivity, and stability), among PAM-modified catalysts the optimal was 1%Pd–Ag(3:1)-PAM/ZnO, presenting a selectivity to styrene of 88% at 91% conversion of phenylacetylene. For comparison, similar Pd–Ag (3:1) bimetallic catalysts modified with polysaccharides, such as pectin (Pec), chitosan (Chit), and 2-hydroxyethylcellulose (HEC), were studied in the hydrogenation process. The catalysts demonstrated nearly the same selectivity to styrene. The activity of the catalysts decreases in the following order: 1%Pd–Ag(3:1)-HEC/ZnO > 1%Pd–Ag(3:1)-PAM/ZnO > 1%Pd–Ag(3:1)-Pec/ZnO > 1%Pd–Ag(3:1)-Chit/ZnO., This work was carried out with the financial support of the State Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan (Grants Nos. AP09563383 and AP09259638). JMLN thanks also Spanish Government for financial support (CRTl2018-099668-B-C21 project)., Peer reviewed