Pasar al contenido principal

NUEVOS MATERIALES ZEOLITICOS PARA PROCESOS DE SEPARACION SELECTIVA DE GASES, APLICACIONES MEDIOAMBIENTALES Y CONSERVACION DE ALIMENTOS

RTI2018-101784-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 76
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of the silver species nature in Ag-ITQ2 zeolites by the CO oxidation reaction

  • López-Hernández, Irene
  • GARCÍA YAGO, CLARA ISABEL
  • Truttmann, V.
  • Pollit, S.
  • Barrabés, N.
  • Rupprechter, G.
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
The authors thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 (MINECO/FEDER) and SEV-2016-0683 projects for the financial support. We gratefully acknowledge ALBA synchrotron for allocating beamtime (proposal 2015091414) and the CLAESS beamline staff for their help and technical support during our experiment. CG and NB thank the TUW Innovative Project GIP165CDGC. CG, SP, VT, NB and GR are thankful for financial support from the Austrian Science Fund (FWF) through projects DK+ Solids4Fun (W1243) and ComCat (I 1041-N28). I. Lopez Hernandez is grateful to Generalitat Valenciana and European Social Fund for the pre doctoral grant ACIF2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cobalt Metal Organic Framework Based on Two Dinuclear Secondary Building Units for Electrocatalytic Oxygen Evolution

  • Gutiérrez-Tarriño, Silvia
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Olloqui Sariego, José Luis
  • Calvente, Juan José
  • Mínguez Espallargas, Guillermo
[EN] The synthesis of a new microporous metal-organic framework (MOF) based on two secondary building units, with dinuclear cobalt centers, has been developed. The employment of a well-defined cobalt cluster results in an unusual topology of the Co-2-MOF, where one of the cobalt centers has three open coordination positions, which has no precedent in MOF materials based on cobalt. Adsorption isotherms have revealed that Co-2-MOF is in the range of best CO2 adsorbents among the carbon materials, with very high CO2/CH4 selectivity. On the other hand, dispersion of Co-2-MOF in an alcoholic solution of Nafion gives rise to a composite (Co-2-MOF@Nafion) with great resistance to hydrolysis in aqueous media and good adherence to graphite electrodes. In fact, it exhibits high electrocatalytic activity and robustness for the oxygen evolution reaction (OER), with a turnover frequency number value superior to those reported for similar electrocatalysts. Overall, this work has provided the basis for the rational design of new cobalt OER catalysts and related materials employing well-defined metal clusters as directing agents of the MOF structure., The authors thank Prof. Avelino Corma for discussion and support, and J. Mazario for XPS analysis and discussion. Program Severo Ochoa SEV-2016-0683 is gratefully acknowledged. S.G.-T. thanks MINECO for a FPU Ph.D. fellowship FPU16/02117. P.O.-B. thanks MEC for his Ramon y Cajal contract RYC-2014-16620. The authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, RTI2018-101784-B-I00, and CTQ2014-52641-P). In addition, P.O.-B. thanks UPV for his grant PAID-06-18/SP20180172. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Host-Guest and Guest-Guest Interactions of P- and N-Containing Structure Directing Agents Entrapped inside MFI-Type Zeolite by Multinuclear NMR Spectroscopy

  • Martinez-Ortigosa, Joaquin
  • Simancas-Coloma, Jorge
  • Gaveau, Philippe
  • Alonso, B.
  • Vidal Moya, José Alejandro
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
[EN] Highly crystalline pure silica MFI zeolites have been synthesized using tetraethylammonium (TEA), tetraethylphosphonium (TEP), or a mixture of both cations in different proportions as organic structure directing agents (OSDAs). The zeolites have been deeply characterized in order to get insight about the guest guest interactions involving the OSDAs and the guest host interactions involving the OSDAs and the inorganic framework, as well as the main features of the resulting materials. The results show that the average size of the MFI crystals decreases when TEP is present within the zeolite and that this cation is homogeneously distributed throughout the crystallites. The multinuclear NMR investigation (H-1, C-13, N-14, F-19, Si-29, P-31) indicates that TEP interacts with the zeolite host creating higher heterogeneity of the SiO4 crystallographic sites and a diminution on the mobility of fluorine atoms incorporated into the zeolite. Moreover, the presence of TEP influences the dynamics of the nitrogen atoms of the TEA molecules, and 2D heteronuclear correlation experiments give evidence on the spatial proximity of the TEA and TEP molecules in the MFI zeolites. Then, it is concluded that TEA and TEP are intimately mixed within the zeolite voids of the pure silica MFI samples synthesized by the dual template route., Financial support by the MINECO of Spain through the Severo Ochoa (SEV-2016-0683) and RTI2018-101784-B-I00 projects is gratefully acknowledged. The authors also thank the Microscopy Service of the Universitat Politecnica de Valencia for its assistance in microscopy characterization (FESEM equipment preparation). J.M.-O. (SEV-2012-0267-02) is grateful to the Severo Ochoa Program for a predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nature and evolution of Pd catalysts supported on activated carbon fibers during the catalytic reduction of bromate in water

  • Cerrillo, Jose L.
  • Lopes, Christian W.
  • Agostini, Giovanni
  • Kiwi-Minsker, Lioubov
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Catalytic hydrogenation of bromate using Pd catalysts supported on activated carbon fibers is a smart solution to treat bromate polluted water. These catalysts have been analyzed by different techniques for an in-deep characterization of the active sites. The in situ X-ray absorption spectroscopy and the CO chemisorption studies showed that Pd-0 nanoparticles with different crystal sizes were generated on the support during hydrogen activation at 200 degrees C and that the PdHx-phase was formed during the cooling to room temperature. As PdHx species formed on Pd-0 nanoparticles are responsible for bromate reduction, the most active catalysts are those having Pd-0 nanoparticles with large crystal sizes, where PdHx species are easily formed. The catalysts are fully stable in succesive reaction runs. It has been also shown that bromate reduction rate depends on the bromate concentration and on the hydrogen partial pressure, with a pseudo-first reaction order towards both reactants., Authors thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 (MINECO/FEDER) and SEV-2016-0683 projects for the financial support. We gratefully acknowledge ALBA synchrotron for allocating beamtime (proposal 2015091414) and CLAESS beamline staff for their technical support during our experiment. C. W. Lopes (Science without Frontiers -Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship. J. L. Cerrillo is grateful to MINECO for the Severo Ochoa contract for PhD formation (SVP-2014-068600). L. Kiwi-Minsker acknowledges financial support provided by Russian Science Foundation (project 15-19-20023). Authors also thank Kynol Europa GmbH for the supply of the activated carbon fibers.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evidence of Hydronium Formation in Water-Chabazite Zeolite Using Inelastic Neutron Scattering Experiments and ab Initio Molecular Dynamics Simulations

  • Jiménez-Ruiz, M.
  • Gahle, D. S.
  • Lemishko, T.
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] A combined study of inelastic neutron scattering and ab initio molecular dynamics simulations has been performed in order to study the water-acid site interaction in zeolite chabazite with a ratio Si/Al = 16 that corresponds to 2 protons/uc with two different water coverages with the number of water molecules being lower and higher than that of proton sites. These results have provided a clear picture of the water-acid site interaction, and it has been demonstrated that there are two regimens of water adsorption, which depend on the water loading. (i) At low water coverage (water/acid site similar to 0.5), the main interactions between water and the zeolitic acid sites are established through hydrogen bond and there is no proton transference to water. (ii) At relatively high water loading (water/acid site similar to 3), the clustering of water molecules and hydronioum cations formed by the complete transference of the zeolitic proton to the water molecules has been observed. The formation of water-hydronium clusters interacting with oxygen atoms of the zeolite framework provides the stabilization energy needed for the protonation of water molecules confined in the cavities of chabazite. These results are the experimental evidence obtained from INS of proton transfer from the zeolitic acid site and the hydronium formation and are in agreement with a previous computational study (Phys. Chem. Chem. Phys. 2009, 11, 1702-1712) and very recent solid state NMR spectroscopy studies (J. Am. Chem. Soc. 2019, 141, 3444-3455). The inspection of the low energy bands (translational and optic modes) and librational bands of the experimental results allows obtaining information about the Hbond network of the hydronium-water cluster, We thank MICINN of Spain for funding through Projects RTI2018-101784-B-I00 and SEV-2016-0683. The authors thank the ILL for neutron beam-time allocation (experiment 7-05-456) and the ILL C-Lab for support. A. Moraleda is acknowledged for the synthesis of CHA-16. G.S. and T.L. thank the ILL for the provision of Contract SRH/GRI/AS-15/222 and a Ph.D. contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computational Screening of Structure-Directing Agents for the Synthesis of Pure Silica ITE Zeolite

  • León-Rubio, Santiago
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] "Shape" was the first criterion claimed to explain the specificity between organic structure-directing agents (OSDAs) and zeolite micropores. With the advent of computational chemistry methods applied to study the effectiveness of SDA-zeolite combinations, "energy" (mainly van der Waals) became the most commonly invoked concept to explain the zeolite phase selectivity. The lower the energy, the better the SDA_ In this study, we rescue the concept of shape, and we combine it with the concept of energy within the frame of a SDA screening approach to identify new SDAs for the synthesis of cage-based ITE zeolite. Once we identify an appropriate shape fingerprint, filtering through the SDA database can be done quickly and accurately. With the shape selection, an automated Monte Carlo software allows us to assess the suitability using the force-field-calculated zeo-SDA energy. The computational approach can be promptly applied to other cage-based zeolites., We thank MICINN of Spain for funding through projects RTI2018-101784-B-I00, RTI2018-101033-B-I00, and SEV-2016-0683. S.L. thanks MICINN for the predoctoral grant BES-2017-081245 corresponding to project SEV-2016-068317-2. Prof. A. Corma is acknowledged for collaboration from the SEV-2016-0683 project. We thank ASIC-UPV for the use of their computational facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Preparation of Continuous Highly Hydrophobic Pure Silica ITQ-29 Zeolite Layers on Alumina Supports

  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Ono, Hideki
[EN] The preparation of continuous layers of highly hydrophobic pure silica ITQ-29 zeolite, potentially applicable as hydrophobic membranes for separation of molecules based on their polarity, has been investigated. Continuous layers of intergrown ITQ-29 zeolite crystals were successfully grown on porous alumina supports by optimization of the synthesis conditions, such as the appropriate selection of the seeds, the procedure for the gel preparation, and the calcination conditions. This resulted in the formation of all silica ITQ-29 zeolite layers without the presence of germanium required in previously reported ITQ-29 membranes, with the subsequent improvement in quality and stability, as verified by the absence of cracks after calcination. We have proved that the incorporation of aluminum from the support into the zeolite layer does not occur, neither during the secondary growth nor through migration of aluminum species during calcination., This research was funded by the European Research Council, grant ERC-AdG-2014-671093 (SynCatMatch) and the Spanish Government, through "Severo Ochoa" grant SEV-2016-0683 and RTI2018-101784-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic oxidation of volatile organic compounds with Mn-zeolites

  • Toloza-Blanco, Lyzed Arelis
  • Góra-Marek, Kinga
  • Tarach, K. A.
  • Sobalska, J.
  • Plá-Hernandez, Adrián
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Mn-catalysts supported on zeolites are active materials for oxidising volatile organic compounds, but the catalysts' activity and selectivity depend on the support's characteristics. In this work, we study the performance of different Mn catalysts supported on zeolites with different Si/Al ratios and topology in the ethanol oxidation reaction. The results show a correlation between the mechanism of the reaction and the presence or absence of acid sites on the zeolite surface, which is based on its aluminium content. It is observed that the presence of Bronsted acid sites catalyses ethanol dehydration to ethylene that is oxidised to CO2 at higher temperatures. Without protonic acid sites, ethanol is primarily oxidised to acetaldehyde and subsequently oxidised to CO2, achieving a complete oxidation at lower temperatures. The acidity also influences the nature of the metallic active sites, forming Mn-oxo species with higher oxidation state in the catalyst with lower aluminium content. These species are more active than those formed in the catalyst enriched with Bronsted acid sites. Thus, zeolites with higher Si/Al ratios are more adequate for supporting Mn catalysts in the ethanol oxidation reaction. The results show that low acidity is a decisive factor in designing active catalysts for this reaction, while zeolite topology or catalyst surface area are of secondary importance., The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033; TED2021-131715B-I00 grant funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGeneration EU/PRTR and PID2021-126235OB-C31) . Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. L. Toloza thanks Fundacion Carolina for the pre-doctoral grant, call 2019-2020 Universidad Central de Colombia and Universitat Politecnica de Valencia agreement. A. Pla-Hernandez thanks Spanish Ministry of Science and Innovation for the pre-doctoral grant PRE2019-088100, associated with the project RTI2018-101784-B-I00. FT-IR and UV-vis in situ and operando studies were financed by Grant No. 2021/41/B/ST4/00048 from the National Science Centre, Poland.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiscale exploration of hydrocarbon adsorption and hopping through ZSM-5 channels - from Monte Carlo modelling to experiment

  • Strzempek, Maciej
  • Tarach, Karolina
  • Góra-Marek, Kinga
  • Piskorz, Witold
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Valencia Valencia, Susana|||0000-0001-7160-2795
[EN] In this article the results of statistical MC modelling corroborated by the FT-IR spectroscopy and gravimetric adsorption studies of low aliphatic hydrocarbons in ZSM-5 (Si/Al = 28 or silicalite) are presented. The extension of the existing Dubbeldam's forcefield towards inclusion of the finite aluminium-containing zeolites is proposed and its applicability is verified experimentally for the sorption of linear and branched hydrocarbons. The FT-IR spectroscopy applicability to follow the kinetics of small hydrocarbon adsorption has been successfully verified by the application of the Crank solution for diffusion to spectroscopy derived results., The present study was funded by the National Science Centre of Poland (grant 2016/23/B/ST4/00088). We acknowledge the Spanish Ministry of Sciences, Innovation and Universities (MCIU) and State Research Agency (AEI) for their funding via projects Program Severo Ochoa SEV-2016-0683 and RTI2018-101033-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Water adsorption and hydrothermal stability of CHA zeolites with different Si/Al ratios and compensating cations

  • Moura, P.A.S.
  • Rodríguez-Aguado, E.
  • Maia, D.A.S.
  • Melo, D. C.
  • Singh, R.
  • Webley, P.A.
  • Bastos-Neto, M.
  • Rodriguez-Castellón, E.
  • Azevedo, D.C.S.
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] Zeolites are well known crystalline aluminosilicates, which may be used in processes that take advantage of their molecular sieving effect, such as natural gas drying. They are often used in cyclic processes that swing pressure and/or temperature to perform adsorption and desorption steps. It is recognized that thermal stress may decrease process performance upon prolonged use. In this work, chabazite (CHA) zeolite with two different Si/Al ratios and compensating cations was investigated by thermally aging the samples using a laboratory-scale protocol. A Premature Aging Protocol - PAP was proposed that took into account the conditions which the adsorbent is exposed to in Temperature Swing Adsorption (TSA) process for natural gas drying. The sample was previously saturated with water and n-heptane vapors (as a reference hydrocarbon) followed by pressurization (30 bar) and heating (573 K) with a mixture of CO2 and CH4 (1:4, v/v). The Si/Al ratios of the CHA samples under study were 2 and 5 and the compensating cations were Na and K. Aged materials presented a lower CO2 and water vapor adsorption capacity with an increasing content of carbon in the bulk composition. The sample with higher Si/Al ratio (approximate to 5) had a larger pore volume but adsorbed less water. Despite having the highest carbon content after aging and modest acidity, it was the most thermally stable sample, together with the sample containing potassium. Even with a lower Si/Al ratio (approximate to 2), the presence of potassium provided the sample a protective effect against aging., The authors acknowledge financial support from Petrobras (Brazil) project 2018/00130-5 and CAPES (Brazil), particularly in the frame of project CAPES/Print 88887.311867/2018-00. E. Rodriguez-Aguado and E. Rodriguez-Castellon are thankful to project RTI2018-099668-BC22 of Ministerio de Ciencia, Innovacion y Universidades (Spain) and project UMA18-FEDERJA-126 of Junta de Andalucia (Spain) and FEDER (E.U.) funds. The authors S. Valencia and F. Rey are thankful to the MCIU (Spain), AEI (Spain) and FEDER (E.U.) for funding through the projects RTI2018-101784-B-I00 and SEV-2016-0683.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Insights into Adsorption of Linear, Monobranched, and Dibranched Alkanes on Pure Silica STW Zeolite as a Promising Material for Their Separation

  • Pérez-Botella, Eduardo
  • Misturini, Alechania
  • Sala-Gascon, Andres
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The adsorption of linear, monobranched and dibranched saturated hydrocarbons in the gasoline range has been studied on pure silica STW zeolite (Si-STW) by using pentane, hexane, and heptane isomers as model adsorbates. Experimental single-component adsorption isotherms and kinetic measurements together with configurational bias Monte Carlo (CBMC) and molecular dynamics (MD) simulations were carried out. Significant differences in both the equilibrium adsorption and especially the adsorption kinetics were found, which suggests that the separation of the quaternary-carbon dibranched isomer is feasible. The adsorption capacities and selectivities surpass those of pure silica MFI (Si-MFI), considered as reference. Altogether, Si-STW is presented as a promising adsorbent for increasing the octane number (ON) of the hydroisomerization product by selectively excluding quaternary-carbon dibranched hydrocarbons., We acknowledge the Spanish Ministry of Sciences, Innovation and Universities (MCIU), State Research Agency (AEI), and the European Fund for Regional Development (FEDER) for their funding via project RTI2018-101784-B-I00 and Program Severo Ochoa SEV-2016-0683. A.S. thanks the MCIU for his grant BES-2016-078684. E.P.B. thanks the MCIU for his grant (FPU15/01602). A.M. thanks the Generalitat Valenciana for a predoctoral fellowship GRISOLIAP/2019/084. A.M. and G.S. thank ASIC-UPV for the computational facilities. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Influence of the Support on the Activity of Mn-Fe Catalysts Used for the Selective Catalytic Reduction of NOx with Ammonia

  • López-Hernández, Irene
  • Mengual Cuquerella, Jesús|||0000-0002-8507-509X
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Mono and bimetallic Mn-Fe catalysts supported on different materials were prepared and their catalytic performance in the NH3-SCR of NOx was investigated. It was shown that Mn and Fe have a synergic effect that enhances the activity at low temperature. Nevertheless, the activity of the bimetallic catalysts depends very much on the support selected. The influence of the support on the catalyst activity has been studied using materials with different textural and acid-base properties. Microporous (BEA-zeolite), mesoporous (SBA15 and MCM41) and bulk (metallic oxides) materials with different acidity have been used as supports for the Mn-Fe catalysts. It has been shown that the activity depends on the acidity of the support and on the surface area. Acid sites are necessary for ammonia adsorption and high surface area produces a better dispersion of the active sites resulting in improved redox properties. The best results have been obtained with the catalysts supported on alumina and on beta zeolite. The first one is the most active at low temperatures but it presents some reversible deactivation in the presence of water. The Mn-Fe catalyst supported on beta zeolite is the most active at temperatures higher than 350 degrees C, without any deactivation in the presence of water and with a 100% selectivity towards nitrogen., This research was funded by the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER), projects RTI2018-101784-B-I00 and RTI2018-101033-B-100 and by Generalitat Valenciana and European Social Fund, the pre doctoral grant ACIF2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Review on the Catalytic Hydrogenation of Bromate in Water Phase

  • Cerrillo, Jose Luis
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] The presence of bromate in water sources generates environmental concern due to its toxicity for humans. Diverse technologies, like membranes, ion exchange, chemical reduction, etc., can be employed to treat bromate-polluted water but they produce waste that must be treated. An alternative to these technologies can be the catalytic reduction of bromate to bromide using hydrogen as a reducing agent. In this review, we analyze the research published about this catalytic technology. Specifically, we summarize and discuss about the state of knowledge related to (1) the different metals used as catalysts for the reaction; (2) the influence of the support on the catalytic activity; (3) the characterization of the catalysts; (4) the reaction mechanisms; and (5) the influence of the water composition in the catalytic activity and in the catalyst stability. Based on published papers, we analyze the strength and weaknesses of this technique and the possibilities of using this reaction for the treatment of bromate-polluted water as a sustainable process., This research was funded by the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER), projects RTI2018-101784-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Mixture Separations with Zeolites: Molecular View on Adsorptive Processes

  • Misturini, Alechania
[ES] Los métodos de química computacional se han empleado en el estudio de materiales de zeolita aplicados a procesos de separación. Se consideró un enfoque clásico, donde los campos de fuerza se seleccionaron durante los procedimientos de benchmark entre los modelos actualmente disponibles. Los resultados obtenidos han sido validados considerando datos experimentales y se mejoró la descripción de los modelos, cuando fue posible, mediante procedimientos de parametrización. Así, los mejores modelos describieron sistemas con diferentes grados de complejidad, que fueron simulados a través de los métodos de Dinámica Molecular y Monte Carlo. La difusión y la adsorción en los microporos (bulk) y en la superficie externa de las zeolitas se pueden entender a nivel molecular. Se calculó la energía de adsorción y también se descompuso su magnitud en las contribuciones electrostática y de van der Waals. Además, fue posible observar más de cerca las interacciones anfitrión-invitado e invitado-invitado durante las trayectorias simuladas. Considerando la creciente demanda energética a nivel mundial, los biocombustibles se consideran una opción sostenible obtenida a partir de biomasa. Se han simulado con éxito los pasos del proceso experimental desarrollado por Denayer et al. para la recuperación de biobutanol a partir de una mezcla fermentada. Se modelaron los ciclos de adsorción y desorción en dos columnas zeolíticas con selectividad complementaria (tipo LTA y CHA), con sistemas de nanoláminas y considerando las principales características experimentales. Aunque las escalas de tiempo experimentales son inalcanzables para los recursos computacionales disponibles actualmente, los sistemas simulados pudieron capturar los fenómenos experimentales y fueron evaluados más a fondo a través del comportamiento microscópico de los sistemas. Un estudio experimental y computacional señaló la STW sílice pura (Si-STW) como un candidato prometedor para la separación de alcanos lineales, monoramificados y diramificados. Se probaron los isómeros C5 a C7, y el material Si-STW superó la capacidad de adsorción y selectividad de MFI de sílice pura, especialmente hacia los isómeros diramificados con átomos de carbono cuaternarios. Se calcularon las isotermas de adsorción, el calor de adsorción y el comportamiento de difusión de los hidrocarburos probados y se compararon con los resultados experimentales. Por lo tanto, las propiedades de adsorción de Si-STW pueden ser exploradas para su uso sobre el producto obtenido durante el proceso de hidromerización - que genera componentes de mayor octanaje para la mezcla de gasolina -, aumentando su número de octano. La producción de 6-kestosa para uso industrial como prebiótico y azúcar de bajo índice glucémico depende de su separación de las moléculas de sacarosa. La separación de una mezcla acuosa equimolar, que contiene sacarosa y 6-kestosa, mediante membranas zeolíticas se ha investigado a través de simulaciones de Dinámica Molecular. Una selección considerando las 253 estructuras de zeolitas reportadas, señaló los tres candidatos más prometedores (AET, ETR y DON), al evaluar el efecto de exclusión por tamaño (adsorción de sacarosa y exclusión de 6-kestosa), la movilidad de ambos azúcares dentro de las estructuras (evaluados con modelos tipo bulk), y simulando su futura aplicación como sistemas de membranas. Entre los mejores candidatos, la zeolita DON presentó una selectividad significativa para las moléculas de sacarosa, con el mayor flujo y siendo factible como material de sílice pura, igualando la composición química simulada., [CA] Els mètodes de química computacional s'han emprat en l'estudi de materials de zeolita aplicats a processos de separació. Es va considerar un enfocament clàssic, on els camps de força es van seleccionar durant els procediments de benchmark entre els models actualment disponibles. Els resultats obtinguts han sigut validats considerant dades experimentals i es va millorar la descripció dels models, quan va ser possible, mitjançant procediments de parametrització. Així, els millors models van descriure sistemes amb diferents graus de complexitat, que van ser simulats a través dels mètodes de Dinàmica Molecular i Monte Carlo. La difusió i l'adsorció en els microporus (bulk) i en la superfície externa de les zeolites es poden entendre a nivell molecular. Es va calcular l'energia d'adsorció i també es va descompondre la seua magnitud en les contribucions electroestàtica i de van der Waals. A més, va ser possible observar més de prop les interaccions amfitrió-convidat i convidat-convidat durant les trajectòries simulades. Considerant la creixent demanda energètica a nivell mundial, els biocombustibles es consideren una opció sostenible obtinguda a partir de biomassa. S'han simulat amb èxit els passos del procés experimental desenvolupat per Denayer et al. per a la recuperació de biobutanol a partir d'una mescla fermentada. Es van modelar els cicles d'adsorció i desorció en dues columnes de zeolites amb selectivitat complementària (tipus LTA i CHA), amb sistemes de nanoláminas i considerant les principals característiques experimentals. Encara que les escales de temps experimentals són inassolibles per als recursos computacionals disponibles actualment, els sistemes simulats van poder capturar els fenòmens experimentals i van ser avaluats més a fons a través del comportament microscòpic dels sistemes. Un estudi experimental i computacional va assenyalar la STW sílice pura (Si-STW) com un candidat prometedor per a la separació d'alcans lineals, monoramificats i diramificats. Es van provar els isòmers C5 a C7, i el material Si-STW va superar la capacitat d'adsorció i selectivitat de MFI de sílice pura, especialment cap als isòmers diramificats amb àtoms de carboni quaternaris. Es van calcular les isotermes d'adsorció, la calor d'adsorció i el comportament de difusió dels hidrocarburs provats i es van comparar amb els resultats experimentals. Per tant, les propietats d'adsorció de Si-STW poden ser explorades per al seu ús sobre el producte obtingut durant el procés de hidromerització - que genera components de major octanatge per a la mescla de gasolina -, augmentant el seu número d'octà. La producció de 6-kestosa per a ús industrial com a prebiòtic i sucre de baix índex glucèmic depén de la seua separació de les molècules de sacarosa. La separació d'una mescla aquosa equimolar que conté sacarosa i 6-kestosa mitjançant membranes de zeolites s'ha investigat amb simulacions de Dinàmica Molecular. Una selecció considerant les 253 estructures de zeolites reportades, va assenyalar els tres candidats més prometedors (AET, ETR i DON), en avaluar l'efecte d'exclusió per grandària (adsorció de sacarosa i exclusió de 6-kestosa), la mobilitat de tots dos sucres dins de les estructures (avaluats amb models tipus bulk), i simulant la seua futura aplicació com a sistemes de membranes. Entre els millors candidats, la zeolita DON va presentar una selectivitat significativa per a les molècules de sacarosa, amb el major flux i sent factible com a material de sílice pura, igualant la composició química simulada., [EN] Computational chemistry methods have been employed in the study of zeolite materials applied to separation processes. A classical approach was considered, where the force fields were selected during benchmark procedures among the models currently available. The obtained results have been validated considering experimental data, and models description was improved, when possible, by parameterization procedures. Thus, the best models described systems with different degrees of complexity, that were simulated through Molecular Dynamics and Monte Carlo methods. Diffusion and adsorption in zeolites' micropores (bulk) and external surface could be understood at a molecular level. The adsorption energy was calculated, and its magnitude also decomposed into the electrostatic and van der Waals contributions. Besides, a closer look into the host-guest and guest-guest interactions could be done during the trajectories simulated. Considering the growing energetic demand worldwide, biofuels are considered a sustainable option obtained from biomass. The steps of the experimental process developed by Denayer et al. for biobutanol recovery from a fermented mixture have been successfully simulated. Both adsorption and desorption cycles in two zeolitic columns with complementary selectivity (LTA and CHA-type) were modeled as nanosheet systems, considering the main experimental features. Although the experimental time scales are unreachable for the current computational resources available, the systems simulated could capture the experimental phenomena, and were further evaluated through the microscopic behavior of the systems. An experimental and computational study pointed pure silica STW (Si-STW) as a promising candidate for the separation of linear, monobranched and dibranched alkanes. C5 to C7 isomers were tested, and Si-STW material outperformed pure silica MFI adsorption capacity and selectivity, specially towards the dibranched isomers with quaternary carbon atoms. Adsorption isotherms, heat of adsorption and the diffusional behavior of the tested hydrocarbons have been calculated, and compared with the experimental results. Thus, Si-STW adsorptive properties can be further explored for its usage over the product obtained during the hydromerisation process - that generates higher-octane components for gasoline mixture -, increasing its octane number. The production of 6-kestose for industrial usage as prebiotic and low-glycemic sugar is dependent on its separation from sucrose molecules. The separation of an equimolar aqueous mixture, containing sucrose and 6-kestose, by zeolitic membranes have been investigated through Molecular Dynamics simulations. A screening considering the 253 zeolites structures reported, pointed out the three most promising candidates (AET, ETR and DON), by evaluating the size exclusion effect (adsorption of sucrose and exclusion of 6-kestose), the mobility of both sugars inside the frameworks (evaluated with bulk models), and simulating their future application as membrane systems. Among the best candidates, DON framework presented a significant selectivity for sucrose molecules, with the largest flux, and being feasible as a pure silica material, matching the chemical composition simulated., This work was supported by Generalitat Valenciana (GVA) predoctoral fellowship GRISOLIAP/2019/084. We also thank GVA for PROMETEO/2021/077 project and ASIC-UPV and SGAI-CSIC for the use of computational facilities. We acknowledge the Spanish Ministry of Sciences, Innovation and Universities (MCIU), State Research Agency (AEI), and the European Fund for Regional Development (FEDER) for their funding via project RTI2018-101784-B-I00 and Program Severo Ochoa SEV-2016-0683
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gold nanoclusters supported on different materials as catalysts for the selective alkyne semihydrogenation

  • López-Hernández, I.
  • Truttmann, V.
  • Barrabés, N.
  • Rupprechter, G.
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Mengual Cuquerella, Jesús|||0000-0002-8507-509X
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Catalysts based on gold nanoclusters supported by different materials have been used for the selective semi hydrogenation of phenylacetylene to styrene. The most active species were formed by catalyst thermal activation in a reductive atmosphere. It is shown that the activity and selectivity of these catalysts is mainly controlled by the interaction of the gold nanoclusters with the support, as demonstrated by using materials with high surface area and different acidity/basicity, i.e. MgO, Al2O3 and Mg/Al hydrotalcite. There is an important influence of the acid/base properties of the support on the selectivity. Higher activity is obtained for gold supported on basic materials (MgO and hydrotalcite) and the best results are obtained with the Au catalyst supported on the MgAl hydrotalcite exhibiting high activity and the best selectivity to the alkene. This was explained by the intermediate basicity of the support that favors the heterolytic cleavage of H2 while avoiding the overreduction of the alkynes to alkanes., The authors thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 (MINECO/FEDER) , PROMETEO/2021/077 and SEV-2016-0683 projects for the financial support. I. Lopez Hernandez is grateful to Generalitat Valenciana and European Social Fund for the pre doctoral grant ACIF2017. We acknowledge support by the Austrian Science Fund (FWF) via Single Atom Catalysis (I 4434-N) and Elise Richter (V831-N) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Separation of an aqueous mixture of 6-kestose/sucrose with zeolites: A molecular dynamics simulation

  • Bolaño Losada, Iria
  • Grobas-Illobre, Pablo
  • Misturini, Alechania
  • Polaina, Julio
  • Seminóvski, Yohanna
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] Extra-large pore zeolites are a small subset (21) among the whole list of 253 zeolites available. The discovery of new low-glycemic sugars is very attractive as new healthy additives in the food field. This is the case of the 6-kestose. In the present case, it appears in a mixture in aqueous solution together with sucrose, the separation of the mixture being necessary. For this, we have focused on using certain zeolites with adequate pore sizes that allow the separation of this mixture, considering that since the molecular size of 6-kestose is greater than sucrose, it is necessary to promote the sorption of the latter, so that the first can be purified. After a computational screening of micropores of the 253 IZA zeolites, 11 zeolites were selected. Of these, 3 extra-large pore zeolites (AET, DON, ETR) have been proposed, which were analyzed in-depth through a molecular dynamics study considering the external surface. The results show that DON presents the most promising theoretical results for a selective sucrose/6-kestose separation., We thank MICINN of Spain for funding through projects RTI2018101784-B-I00, RTI2018-101033-B-I00, SEV-2016-0683 as well as ASICUPV and CESGA for computational facilities. IBL and PGI gratefully acknowledge CSIC for a JAE-Intro fellowship. AM thanks Generalitat Valenciana for the predoctoral fellowship GRISOLIAP/2019/084.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Síntesis y caracterización avanzada de materiales zeolíticos mediante el empleo de nuevos agentes orgánicos directores de estructura

  • Sala Gascón, Andrés
[ES] Las zeolitas han destacado por sus aplicaciones en procesos catalíticos y de adsorción/separación de gases de alto impacto industrial. Esto es debido a que presentan propiedades de tamiz molecular como consecuencia de sus estructuras microporosas y, además es posible ajustar sus propiedades catalíticas variando su composición química, presencia de defectos estructurales, tamaño promedio de cristal, etc. Hasta el momento se han reconocido 255 estructuras zeolíticas diferentes, pero la obtención de zeolitas con nuevas estructuras es un aspecto muy relevante dentro de la ciencia de materiales ya que permite ampliar el rango de aplicaciones de estos materiales. Por ello, el objetivo fundamental de esta tesis doctoral es la obtención de nuevos materiales zeolíticos, empleándose para ello, cationes orgánicos que actuarán como agentes directores de estructura (ADEs) en la cristalización de zeolitas. Así, se ha estudiado el empleo cationes derivados de biciclopirrolidina como ADEs sintetizados mediante reacciones orgánicas de cicloadición [3+2]. Estos ADEs han sido efectivos en la síntesis de zeolitas, obteniéndose diversos sólidos microporosos cuya preparación había sido descrita anteriormente con otros cationes orgánicos. Sin embargo, uno de los cationes empleados ha dado lugar a la cristalización de una nueva zeolita, denominada ITQ-69, que presenta un sistema tridireccional de canales rectos, de poro pequeño (8 x 8 x 8 R) y ausencia de cavidades. Este material ha sido efectivo en la separación selectiva de propileno de propano en su forma de germanosilicato. La síntesis de zeolitas quirales, es sin duda el objetivo más ambicioso propuesto. En esta tesis se ha explorado el empleo de derivados de azúcares como parte fundamental en la síntesis de ADEs. En concreto, se ha explorado la isomanida como unidad sintética quiral en la preparación de dicationes quirales. Cuando la isomanida se combina con la presencia de imidazolios (altamente selectivos hacía la estructura STW) se ha obtenido un material STW en forma de germanosilicato. Este sólido cristaliza formando cristales de tamaño suficientemente grande como para realizar estudios de difracción de Rayos X en monocristal, y determinar el exceso enantiomérico de distintas preparaciones. En todos los casos, se obtiene cristales S-STW homoquirales enantimórficamente puros, constituyendo el primer ejemplo de obtención selectiva quiral de una zeolita reportado hasta la fecha. En esta parte de la tesis, también se obtuvieron zeolitas con topología STW empleando ADEs no quirales. Algunos de estos sólidos, se evaluaron en la separación de hidrocarburos con diferentes grados de ramificación (zeolita STW puramente silícea) y en la reducción selectiva de NO con propano (zeolita Al-STW intercambiadas con Cu). Finalmente, se han estudiado diferentes cationes organofosforados como ADEs. La elevada estabilidad de estos cationes en el medio de síntesis, ha permitido la obtención de una nueva zeolita, ITQ-70, que presenta un elevado grado de defectos de conectividad y una muy baja densidad de red. La estructura de la zeolita ITQ-70 presenta un sistema de supercavidades con ventanas interconectadas de acceso a las mismas (20 x 20 x 18 R) y cristaliza con un grupo de simetría proquiral., [CA] Zeolites are well-known for their industrial applications. The presence of pores of molecular dimensions forming a structured channels system confers them the property of performing as a molecular sieve. This characteristic of zeolites, combined with the possibility of modifying their chemical composition, structural defects, average crystal size, etc., provides them with exceptional properties for catalytic and separation processes. Up to now, 255 different zeolitic structures have been compiled. However, obtaining zeolites with new structures remains an important challenge in materials science and broadening their applications. Therefore, the main objective of this doctoral thesis is the obtention of new zeolitic materials using organic cations as structure-directing agents (SDAs) in the crystallization process. Thus, the use of bicyclopyrrolidine-derived cations as ADEs, synthesized by organic cycloaddition reactions [3+2], has been studied. Several microporous solids whose preparation had been previously described using other organic cations have been obtained by utilizing these bicyclopyrrolidine-derived cations as ADEs. In addition, the crystallization of a new zeolite, ITQ-69, has been reached. This structure presents a tridirectional system of straight small pore size channels (8 x 8 x 8 R) and the absence of cavities. ITQ-69, in its germanosilicate form, has been proved to be significantly effective for the separation of propylene from propane. Obtaining chiral zeolite is undoubtedly one of the most ambitious objectives proposed in the field of zeolite synthesis. In this thesis, sugar derivatives have been specifically considered as starting molecules for the synthesis of chiral ADEs. Particularly, the synthesis of dicationic ADEs starting from isomannide as a chiral synthetic unit has been explored. When isomannide was combined with imidazole (highly selective towards the STW structure), a STW-structure material in the form of germanosilicate was obtained. This solid crystallizes forming sufficiently large crystals to perform single-crystal X-ray diffraction studies and determine the enantiomeric excess of different preparations. In all cases, enantiomorphically pure homochiral S-STW crystals are obtained, constituting the first reported example of chiral selective synthesis of a zeolite. Zeolites with STW structure were also obtained using non-chiral ADEs. The properties of these microporous solids were evaluated in the separation of hydrocarbons with different branching, in the form of purely siliceous STW, and in the selective reduction of NO with propane using Cu-exchanged Al-STW zeolites. Finally, different organophosphorus cations have been studied as ADEs. The high stability of these cations in the zeolites crystallization medium has allowed the isolation of a new zeolite, ITQ-70, which presents a high number of connectivity defects and a very low lattice density. The structure of the ITQ-70 zeolite possesses a super-cavity system with interconnected access windows (20 x 20 x 18) and crystallized with a prochiral symmetry group., [EN] Les zeolites han destacat per les seues aplicacions en processos catalítics i processos d'adsorció/separació de gasos d'alt impacte industrial. Açò és degut al fet que presenten propietats de tamís molecular a conseqüència de les seues estructures microporoses i, a més és possible ajustar les seues propietats catalítiques variant la seua composició química, presència de defectes estructutals, grandària del cristall, etc. Fins al moment es reconeixen 255 estructures zeolítiques diferents, però l'obtenció de zeolites amb noves estructures és un aspecte molt rellevant dins de la ciència de materials, ja que permet ampliar el rang d'aplicacions d'aquests materials. Per tant, l'aspecte fonamental d'aquesta tesi doctoral és l'obtenció de nous materials zeolítics empleant cations orgànics que actuaran com a agents directors d'estructura (ADEs) en la cristal·lització de zeolites. Així, s'ha explorat l'us de cations derivats de biciclopirrolidina com ADEs sintetitzats mitjançant reaccions orgàniques de cicloadició [3+2]. Aquests ADEs han sigut efectius en la síntesis de zeolites, obtenint-se diversos sòlids microporosos, la preparació dels quals havia sigut descrita anteriorment amb altres cations orgànics. No obstant, un dels cations empleats ha donat lloc a la cristal·lització d'una nova zeolita, denominada ITQ-69, que presenta un sistema tridireccional de canals rectes, porus xicotets (8 x 8 x 8 R) i absència de cavitats. Aquest material ha sigut efectiu en la separació selectiva de propilé de propà en la seua forma de germanosilicat. Dins de la síntesi de zeolites, la síntesi de zeolites quirals, és sens dubte un dels objectius més ambiciosos proposats. En aquesta tesi s'ha explorat l'ús de derivats de sucres com a part fonamental en la síntesi de ADEs. En concret, s'ha explorat la isomanida com a unitat sintètica quiral en la preparació de dications quirals. Quan la isomanida es combina amb la presència de imidazolios (altament selectius feia l'estructura STW) s'ha obtingut un material STW en forma de germanosilicato. Aquest sòlid cristal·litza formant cristalls de grandària prou gran com per a realitzar estudis de difracció de Raigs X en monocristall, i determinar l'excés enantioméric de diferents preparacions. En tots els casos, s'obté cristalls S-STW homoquirals enantimórficament purs, constituint el primer exemple d'obtenció selectiva quiral d'una zeolita reportat fins a la data. En aquesta part de la tesi, també es van obtindre zeolites amb topologia STW empleant ADEs no quirals. Alguns dels materials STW es van avaluar les propietats d'aquests sòlids microporosos en la separació d'hidrocarburs amb diferents graus de ramificació amb STW purament silici i en la reducció selectiva de NO amb propà empleant zeolites Al-STW intercanviades amb Cu. Finalment, s'han estudiat diferents cations organofosforats com ADEs. L'elevada estabilitat d'aquests cations en el mitjà de cristal·lització de zeolites ha permés aïllar una nova zeolita, ITQ-70, que presenta un elevat grau de defectes de connectivitat i una molt baixa densitat de xarxa. L'estructura de la zeolita ITQ-70 té un sistema compost per supercavitats amb finestres interconnectades d'accés a les mateixes (20 x 20 x 18) i cristal·litza amb un grup de simetria proquiral., Al Ministerio de Economía, Industria y Competitividad por concederme la Beca BES-2016-078684 que ha permitido la realización de esta tesis doctoral, junto a la ayuda económica proporcionada en los proyectos MAT2015-71842 y RTI2018-101784-B-100. A la Generalitat Valenciana su financiación a través del proyecto PROMETEO/2021/07 y por último a la Universidad Politécnica de Valencia (UPV), al Consejo Superior de Investigaciones Científicas (CSIC) y al Instituto de Tecnología Química (ITQ) por proporcionar las instalaciones y equipamiento necesarios para llevar a cabo el trabajo de investigación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ITQ-69: A Germanium-Containing Zeolite and its Synthesis, Structure Determination, and Adsorption Properties

  • Sala-Gascon, Andres
  • Pérez-Botella, Eduardo
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Valencia Valencia, Susana|||0000-0001-7160-2795
[EN] In this work, a new zeolite named as ITQ-69, has been synthesized, characterized and its application as selective adsorbent for industrially relevant light olefins/paraffins separations has been assessed. This material has been obtained as pure germania as well as silica-germania zeolites with different Si/Ge ratios using a diquaternary ammonium cation as organic structure directing agent. Its structure was determined by single-crystal X-Ray diffraction showing a triclinic unit cell forming a tridirectional small pore channel system (8x8x8R). Also, it has been found that Si preferentially occupies some special T sites of the structure as deduced from Rietveld analysis of the powder X-ray diffraction patterns. In addition, the new zeolite ITQ-69 has been found to be stable upon calcination and thus, its adsorption properties were evaluated, showing a promising kinetic selectivity for light olefin separations in the C3 fraction., The authors acknowledge the Spanish Ministry of Science, Innovation and Universities (MCIU) for their funding via project RTI2018-101784-B-I00 and Program Severo Ochoa SEV-2016-0683. AS and EPB thanks for their grants BES-2016-078684 and FPU15/01602, respectively. The Microscopy Service of the UPV is acknowledged for their help in sample characterization. By last, authors would like to thank the use of RIAIDT-USC analytical facilities, especially to Dr. Antonio L. Llamas for extremely useful comments on SCXRD analyses.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of Alkylarsonium Directing Agents for the Synthesis and Study of Zeolites

  • Saez-Ferre, Sara
  • Lopes, Christian W.
  • Simancas-Coloma, Jorge
  • Agostini, Giovanni
  • Mínguez Espallargas, Guillermo
  • Vidal Moya, José Alejandro
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Expanding the previously known family of -onium (ammonium, phosphonium, and sulfonium) organic structure-directing agents (OSDAs) for the synthesis of zeolite MFI, a new member, the arsonium cation, is used for the first time. The new group of tetraalkylarsonium cations has allowed the synthesis of the zeolite ZSM-5 with several different chemical compositions, opening a route for the synthesis of zeolites with a new series of OSDA. Moreover, the use of As replacing N in the OSDA allows the introduction of probe atoms that facilitate the study of these molecules by powder X-ray diffraction (PXRD), solid-state nuclear magnetic resonance (MAS NMR), and X-ray absorption spectroscopy (XAS). Finally, the influence of trivalent elements such as B, Al, or Ga isomorphically replacing Si atoms in the framework structure and its interaction with the As species has been studied. The suitability of the tetraalkylarsonium cation for carrying out the crystallization of zeolites is demonstrated along with the benefit of the presence of As atoms in the occluded OSDA, which allows its advanced characterization as well as the study of its evolution during OSDA removal by thermal treatments., Program Severo Ochoa SEV-2016-0683 and Maria de Maeztu MDM-2015-0538 are gratefully acknowledged. S.S-F. thanks MEC for his Severo Ochoa Grant SPV-2013-067884, P.O.-B. and G.M.E. thank MEC for his Ramon y Cajal contracts (RYC-2014-16620 and RYC-2013-14386). The authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, RTI2018-101784-B-I00 and CTQ2017-89528-P) and the Generalitat Valeciana (PROMETEO/2017/066). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. We gratefully acknowledge ESRF synchrotron for allocating beamtime (proposal CH-5193), the Italian CRG beam-line at ESRF (LISA-BM08), and Alessandro Puri for the help and technical support during our experiment. C.W.L. (Science without Frontiers-Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cobalt Metal-Organic Framework Based on Layered Double Nanosheets for Enhanced Electrocatalytic Water Oxidation in Neutral Media

  • Gutiérrez-Tarriño, Silvia
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Olloqui-Sariego, José Luis
  • Calvente, Juan José
  • Minguez Espallargas, Guillermo
Programs Severo Ochoa SEV-2016-0683 and María de Maeztu CEX2019-000919-M are gratefully acknowledged. S.G.-T. thanks the MINECO for her FPU Ph.D. contract FPU16/02117. P.O.-B. and G.M.E. thank MICCIN for their Ramón y Cajal contracts RYC-2014-16620 and RYC-2013-14386. The authors acknowledge the financial support by the Spanish Government (RTI2018-096399-A-I00, RTI2018-101784-BI00, CTQ2017-89528-P, and CTQ2014-52641-P) and Generalitat Valenciana (PROMETEU/2019/066). In addition, P.O.-B. thanks UPV for his grant PAID-06-18/SP20180172. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pt-zeolites as active catalysts for the removal of chlorate in water by hydrogenation reactions

  • Plá-Hernandez, Adrián
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Catalytic hydrogenation is used to remove chlorate ions from water streams by using platinum catalysts supported on zeolites with different topologies (FAU, BEA, MWW, MFI and MOR), Si/Al ratio and compensating cation. It is observed that there is an important influence of the zeolite characteristics on the catalytic activity. The best results have been obtained with the catalyst supported on zeolites with a high number of acid centres, this is with a low Si/Al ratio and with protons, as counter-cation species compensating aluminium charge. The acid sites favour the interaction of the catalyst with the reactants and influence the neighbouring Pt species improving the redox properties of the catalyst. It is shown that with an adequate number of acid sites it is possible to decrease the metal content, keeping the same catalytic activity, by increasing the metal dispersion. The highest activity is obtained with an acidic FAU zeolite, with low Si/Al ratio and 1 wt% of Pt added by ion exchange. This catalyst is able to simultaneously reduce chlorate and chlorite ions and chlorate and bromate ions indicating that it is a multifunctional catalyst that can be utilized for removing different pollutants in water., The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033, and TED2021-131715B-I00 grant funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe " by the European Union NextGenerationEU/PRTR) . Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. A. Pla-Hernandez thanks Spanish Ministry of Science and Innovation for the pre-doctoral grant PRE2019-088100, associated with the project RTI2018-101784-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Porous Solids for Adsorption and Separation of Gas and Vapor Mixtures

  • Pérez Botella, Eduardo
[ES] En esta tesis se han estudiado las propiedades de diferentes adsorbentes zeolíticos y su uso en separaciones de mezclas fluidas de interés industrial. La selección de los materiales se ha realizado poniendo especial énfasis en los adsorbentes zeolíticos de poro pequeño de baja polaridad, más concretamente, zeolitas pura sílice, aluminofosfatos y silicoaluminofosfatos. Las separaciones que se han considerado están relacionadas principalmente con la producción de energía, procesado del gas natural y del biogás, purificación de hidrógeno, mejora del índice de octano de la gasolina y purificación de biobutanol. Las propiedades de adsorción se han estudiado mediante medidas de isotermas de adsorción de un solo componente, medidas de cinéticas de adsorción de un solo componente y experimentos de adsorción dinámica multicomponente, es decir, experimentos de curvas de ruptura. Las isotermas de adsorción se analizaron en cuanto a forma y capacidad máxima de adsorción y se utilizaron para calcular los calores isostéricos de adsorción, las selectividades termodinámicas y las capacidades de trabajo ideales en procesos hipotéticos de adsorción por oscilación. Las medidas de cinéticas de adsorción han permitido comparar el comportamiento difusional de diferentes adsorbatos en diferentes materiales y calcular las constantes de difusión temporales, que a su vez fueron utilizadas para calcular selectividades cinéticas ideales / factores de separación. Los experimentos de curvas de ruptura se utilizaron para ver cómo se comportan los materiales en condiciones cercanas al caso industrial, para calcular las selectividades reales de mezcla y los parámetros de operación relevantes de procesos de adsorción, es decir, productividad, recuperación y pureza. Las propiedades físicas de los materiales estudiados, como la estructura, el orden cristalino, la conectividad atómica, el tamaño y la forma de las partículas y las propiedades texturales, han sido evaluadas y empleadas para explicar los resultados obtenidos en los experimentos de adsorción. En el capítulo 1, se presenta una introducción general sobre las zeolitas, su síntesis, propiedades y aplicaciones, junto con una introducción acerca de los fenómenos de adsorción y las separaciones industriales de interés para esta tesis. En el capítulo 2 se presentan los objetivos de este trabajo de tesis. En el capítulo 3 se presenta la síntesis de los adsorbentes utilizados, junto con los equipos de caracterización y adsorción y los procedimientos de análisis de datos de adsorción. En el capítulo 4, se estudia la adsorción de gases ligeros en Si-RWR con especial énfasis en la separación de isótopos de hidrógeno y la purificación del hidrógeno presente en la corriente de salida de un proceso de reformado de metano con vapor. En el capítulo 5 estudio las propiedades de adsorción de \ce{CO2} en aluminofosfatos, silicoaluminofosfatos y zeolitas de estructuras LTA, CHA y AFI, y más específicamente los calores isostéricos de adsorción. En el capítulo 6, estudio el efecto del tamaño de poro y la topología de poro en la separación de \ce{CO2} de \ce{CH4} mediante isotermas de compuestos puros y experimentos de ruptura de la mezcla. En el capítulo 7, se estudian las propiedades de adsorción de hidrocarburos de las fracciones C5-C7 en Si-STW con la atención puesta en la separación de hidrocarburos dirramificados de monorramificados y lineales. Se establece una comparación con Si-MFI. En el capítulo 8 se estudia una serie de zeolitas puramente silíceas para la separación de una mezcla de vapores de 1-butanol, acetona, etanol y agua proveniente de un proceso de fermentación. Se han realizado experimentos de adsorción de los compuestos puros, así como de mezclas de ellos mediante curvas de ruptura. Se presta atención a la recuperación de 1-butanol durante el proceso de adsorción, estudiá, [CA] En aquesta tesi, s'han estudiat les propietats de diferents adsorbents zeolítics i el seu ús en separacions de mescles de fluids d'interès industrial. La selecció dels materials s'ha dut a terme posant un èmfasi especial en els adsorbents zeolítics de porus petit de baixa polaritat, més concretament, les zeolites pura sílice, aluminofosfats i silicoaluminofosfats. Les separacions que s'han considerat estan relacionades principalment amb la producció d'energia, el processament de gas natural i de biogàs, la purificació d'hidrogen, la millora del nombre d'octans de la gasolina i la purificació de biobutanol. Les propietats d'adsorció s'han estudiat mitjançant isotermes d'adsorció d'un component, cinètiques d'adsorció d'un component i experiments d'adsorció dinàmica multicomponent, és a dir, experiments de corbes de ruptura. Les isotermes d'adsorció es van analitzar en funció de la seva forma i capacitat màxima d'adsorció i es van utilitzar per calcular les calors isostèriques d'adsorció, les selectivitats termodinàmiques i les capacitats de treball ideals en els hipotètics processos d'adsorció per oscil·lació . Les mesures de cinètiques d'adsorció han permès comparar el comportament difusional de diferents adsorbats en diferents materials i calcular constants temporals de difusió, que, al seu torn, s'han utilitzat per al càlcul de selectivitats cinètiques ideals/factors de separació. Els experiments de corbes de ruptura es van utilitzar per, veure com funcionen els materials en condicions properes al cas industrial i per calcular per a cada mescla les selectivitats i els paràmetres d'operació rellevants per a processos d'adsorció, és a dir, la productivitat, la recuperació i la puresa. Les propietats físiques dels materials estudiats, com ara l'estructura, l'ordre cristal·lí, la connectivitat dels àtoms, la mida i la forma de les partícules i les propietats texturals s'han avaluat i s'han utilitzat per explicar els resultats obtinguts en els experiments d'adsorció. En el capítol 1, es proporciona una introducció general sobre les zeolites, la seva síntesi, propietats i aplicacions, juntament amb una introducció referent a fenòmens d'adsorció i separacions industrials d'interès en aquesta tesi. En el capítol 2 es presenten els objectius d'aquest treball de tesi. En el capítol 3 es presenta la síntesi dels adsorbents utilitzats, juntament amb els equips de caracterització i adsorció i els procediments d'anàlisi de dades d'adsorció. En el capítol 4, s'estudia l'adsorció de gasos lleugers a Si-RWR amb especial atenció a la separació d'isòtops d'hidrogen i la purificació de l'hidrogen present en el corrent de sortida d'un procés de reformat de metà amb vapor. En el capítol 5 estudio les propietats d'adsorció de \ce{CO2} en aluminofosfats, silicoaluminofosfats i zeolites d'estructures LTA, CHA i AFI i, més concretament, les seus calors d'adsorció isostèriques. En el capítol 6, estudio l'efecte de la mida i la topologia de porus sobre la separació de \ce{CO2} de \ce{CH4} mitjançant isotermes de components purs i experiments de ruptura de la mescla. En el capítol 7, s'estudien les propietats d'adsorció d'hidrocarburs de les fraccions C5-C7 en Si-STW amb especial atenció a la separació d'hidrocarburs lineals i monorramificats de dirramificats. S'estableix una comparació amb Si-MFI. En el capítol 8 s'estudia una sèrie de zeolites purament silícies per a la separació d'una mescla de vapors de 1-butanol, acetona, etanol i aigua provinent d'un procés de fermentació. S'han realitzat experiments d'adsorció dels compostos purs, així com de mescles d'ells mitjançant corbes de ruptura. Es para atenció a la recuperació de 1-butanol durant el procés d'adsorció, estudiant-se la recuperació del producte desitjat enfront de la puresa d'aquest., [EN] In this thesis, the properties of different zeolitic adsorbents and their use in separations of fluid mixtures of industrial interest have been studied. The selection of the materials has been carried out putting a special emphasis on low polarity small pore zeolitic adsorbents, more specifically, pure silica zeolites, aluminophosphates and silicoaluminophosphates. The separations that have been considered are related mostly to energy production, natural and biogas upgrading, purification of hydrogen, gasoline octane number improvement and purification of biobutanol. The adsorption properties of the zeolitic materials have been studied by single component adsorption isotherm measurements, single component adsorption kinetics measurements and multicomponent dynamic adsorption experiments, i.e. breakthrough experiments. The adsorption isotherms were analysed in terms of their shape, the maximum adsorption capacity and used to calculate isosteric heats of adsorption, ideal thermodynamic selectivities and ideal working capacities in hypothetical swing adsorption processes. The adsorption kinetics measurements have allowed to compare the diffusional behavior of different adsorbates in different materials and to calculate diffusional time constants, which were, in turn, used for calculating ideal kinetic selectivities/separation factors. The breakthrough experiments were used to ultimately see how materials perform at conditions close to the industrial case and to calculate for each material mixture selectivities and relevant swing adsorption process operation parameters, i.e. productivity, recovery and purity. The physical properties of the studied materials, such as structure, crystalline order, atom connectivity, particle size and shape and textural properties have been critically evaluated and used to explain the results obtained in the adsorption studies. In chapter 1, a general introduction on zeolites, their synthesis, properties and applications is provided, together with an introduction on adsorption phenomena and on the industrial separations of interest to this thesis. In chapter 2 the objectives of this thesis work are presented. In chapter 3 the synthesis of the adsorbents used is presented, together with the characterization and adsorption equipment and the adsorption data analysis procedures. In chapter 4, the adsorption of light gases on pure silica RWR zeolite is studied with special focus on the separation of hydrogen isotopes and the purification of hydrogen from steam methane reformery off-gas. In chapter 5 I study the adsorption properties of CO2 on aluminophosphates, silicoaluminophosphates and zeolites of LTA, CHA and AFI structures, and more specifically their isosteric heats of adsorption. In chapter 6, I study the effect of pore size and pore topology on the separation of CO2 from CH4 by means of pure component isotherms and breakthrough experiments of the mixture. In chapter 7, the adsorption properties of C5-C7 hydrocarbons on pure silica STW zeolite are studied with special focus on the separation of dibranched from monobranched and linear hydrocarbons. A comparison with pure silica MFI zeolite (silicalite-1) is established. In chapter 8 a set of pure silica zeolites is studied as adsorbents for the vapor phase separation of 1-butanol from acetone, ethanol and water, typical components of the ABE fermentation broth. Pure component isotherms were measured and breakthrough experiments were carried out using multicomponent mixtures. Special focus is put on the recovery of 1-butanol from the desorption curve, and the dependence of purity with recovery is studied., I would like to thank the Spanish Ministry of Science, Innovation and Universities (MCIU) for my grant FPU15/01602, which has allowed me to carry out this thesis. I thank again the MCIU for paying my short stay in Brussels and for the funding provided through many different projects (RTI2018-101784-B-I00, Program Severo Ochoa SEV-2016-0683; and previous ones), which covered the costs of my research activities and allowed for my assistance to numerous international conferences which completed my training as a scientist. I thank the Instituto de Tecnología Química, the Universitat Politècnica de València (UPV) and the Consejo Superior de Investigaciones Científicas for providing the infrastructure needed for carrying out successful research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pt-V bimetallic catalysts for the catalytic reduction of chlorate ion pollutants in natural water

  • Plá-Hernandez, Adrián
  • Gora-Marek, K.
  • Tarach, K. A.
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Pt-V bimetallic catalysts supported on alumina are studied for the chlorate hydrogenation reaction in water phase. It is observed that there is a synergic effect between Pt and V that enhances the catalytic activity. The activity of both mono and bimetallic catalysts has been studied in polluted natural water containing other ionic species together with the chlorate ion. It is observed that the monometallic catalysts are not active in these conditions as there is a competitive adsorption of the other anions present in natural water for the Pt active sites. Contrarily, Pt-V catalysts are active in natural water being able to reduce the chlorate ions of the media in presence of other ions. The materials have been characterized by different techniques observing that the addition of vanadium to the Pt-Al2O3 modifies the electronic properties of the platinum sites, due to a high electronic interaction of both metals. This interaction favours the formation of partially positively charged platinum nanoclusters and strength the acidity of the catalyst surface. Infrared characterization using CO as probe molecule provided selective information about the centres participating in the reaction. It is shown that there is a correlation between the intensity of the band around 2100 cm(-1), assigned to the interaction CO-Pt+delta and the initial activity of the catalysts. This indicates that partially charged Pt nanoclusters are the most active sites for the chlorate reduction. The combination of the noble and the non-noble metal and their interaction with the alumina support, improves the redox and acid properties of the catalyst enhancing its activity and making possible the reduction of chlorate pollutants in natural water., Authors thank the financial support of the Ministerio Espanol de Ciencia e Innovacion (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033, and TED2021-131715B-I00 grant funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union Next Generation EU/PRTR) . Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. A. Pla-Hernandez thanks Ministerio Espanol de Ciencia e Innovacion for the pre-doctoral grant PRE2019-088100, associated with the project RTI2018-101784-B-I00. The FT-IR research was partially carried out using research infrastructure purchased with the funds of the European Union in the framework of the Smart Growth Operational Programme, Measure 4.2; Grant No. POIR.04.02.00-00-D001/20-00, "ATOMIN 2.0 - ATOMic scale science for the INnovative economy"
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Zeolite Phase Selectivity Using the Same Organic Structure-Directing Agent in Fluoride and Hydroxide Media

  • León-Rubio, Santiago
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] Force field-based calculations of all-silica zeolites show the role of fluoride as a structure-directing agent (SDA). Calculations of fully packed organic and fluoride SDAs were possible with an updated version of zeoTsda software, based on Monte Carlo+Lattice Energy Minimization. Comparison between fluoride-containing and fluoride-free calculations using the same organic SDA allowed us to predict which zeolite phase is obtained in fluoride and hydroxide media and also, through a new energy decomposition scheme, identify energetic contributions driving the synthesis outcome., We thank MICINN of Spain for funding through projects RTI2018-101784-B-I00, RTI2018-101033-B-I00, and SEV-2016-0683. S.L. thanks MICINN for predoctoral grant BES-2017-081245 corresponding to project SEV-2016-0683-17-2. Prof. A. Corma is acknowledged for collaboration from the SEV-2016-0683 project. We thank ASIC-UPV for the use of computational facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ce-modified zeolite BEA catalysts for the trichloroethylene oxidation. The role of the different and necessary active sites

  • Golabek, Kinga
  • Tarach, Karolina A.
  • Kruczala, Krzysztof
  • Girman, Vladimir
  • Góra-Marek, Kinga
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
[EN] This paper reports the activity of different Ce-BEA zeolites for the catalytic oxidation of trichloroethylene and it is focused on determining the nature of the catalyst active sites. The study was made by using a microporous zeolite BEA, two types of desilicated BEA zeolites and mildly steamed desilicated BEA zeolites. The catalysts were prepared by introducing Ce to the zeolites with incipient wetness impregnation and their structural, textural, and acidic properties were established. The evolution of TCE conversion was correlated with the physicochemical properties of the zeolites. It is shown that highly developed mesopore surface area, well-dispersed cerium species and a high number of Bronsted sites results in the highest activity. The activity and selectivity of the Ce-loaded zeolites were found to be dependent on the number of high strength Bronsted acid centres. The hierarchical materials with a higher density of hydroxyls showed higher yields to HCl while the formation of chlorine was prevented., The work was financed by the Grant No. 2015/18/E/ST4/00191 from the National Science Centre, Poland. J.M-T. and A.E.P thank Spanish Governmentthrough "Severo Ochoa" SEV-2016-0683, RTI2018-099668-B-C21, RTI2018-101784-B-I00 and the Fundacion Ramon Arecesthrough a research contract of the "Life and Materials Science" program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Zeolite-driven Ag species during redox treatments and catalytic implications for SCO of NH3

  • W. Lopes, Christian
  • Martinez-Ortigosa, Joaquin
  • Góra-Marek, Kinga
  • Tarach, Karolina
  • Agostini, Giovanni
  • Vidal Moya, José Alejandro
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] Supported silver species are among the most promising catalysts for the depletion of ammonia emission by selective catalytic oxidation (NH3-SCO). Here, an investigation on the influence of small pore CHA and RHO zeolite structures on the silver species formed and their catalytic activity for the NH3-SCO reaction has been conducted. To this end, AgRHO(4) and AgCHA(4) zeolites with similar Si/Al molar ratios (approximate to 4) and silver content (similar to 15 wt%, Ag/Al approximate to 0.6), and AgCHA(2) with Si/Al approximate to 2 and higher silver loading, while maintaining the Ag/Al ratio (similar to 26 wt%, Ag/Al approximate to 0.6), have been submitted to different treatments and characterized by using a large variety of techniques (XRD, UV-Vis, Ag-109 NMR, in situ XAS and operando FT-IR). The reduction of the AgCHA and AgRHO zeolites at low temperature (100-200 degrees C) produces silver clusters, which remain in the AgRHO zeolite when the temperature is increased to 400 degrees C. However, the silver species in the AgCHA zeolites evolve to nanoparticles (NPs) at 400 degrees C under H-2. The catalytic tests show that metal particles are the active sites while silver clusters are inactive for the NH3-SCO reaction. Also, there are important differences in the stability of the reduced Ag species under oxidizing or under reaction conditions at 400 degrees C. Metal NPs are partially redispersed and oxidized to (Ag)(n)(+), while silver clusters are completely oxidized to Ag+. Our results indicate that silver clusters are stabilized in the RHO-type and not in the CHA-type zeolite, and thus they display very different catalytic activities for the NH3-SCO reaction., The authors acknowledge grant RTI2018-101784-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". Also, the project SEV-2016-0683 funded by MCIN/AEI/10.13039/501100011033 is acknowledged. The project Prometeo/2021/077, Conselleria de Educacion, Cultura y Deporte de la Generalitat Valenciana is also acknowledged. K. G.-M. acknowledges Grant No. 2015/18/E/ST4/00191 from the National Science Centre, Poland. K. T. acknowledges the scholarship within the Bekker Programme (PPN/BEK/2018/1/00406) from the Polish National Agency for Academic Exchange. C. W. Lopes (Science without Frontiers -Process no. 13191/13-6) thanks Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior -Brasil (CAPES - Finance Code 001) for the predoctoral fellowship. J. Martinez-Ortigosa (SEV-20120267-02) acknowledges the Severo Ochoa Program for a predoctoral fellowship. We gratefully acknowledge the ALBA synchrotron for allocating beamtime (proposals 2016021665 and 2017032119), CLAESS beamline staff, and particularly Carlo Marini for their help and technical support during our experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Multi-Nuclear MAS-NMR Study on the Structural Properties of Silicalite-1 Zeolite Synthesized Using N- and P-Based Organic Structure Directing Agents

  • Martinez-Ortigosa, Joaquin
  • Simancas, Jorge
  • Vidal Moya, José Alejandro
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
[EN] The nature of organic structure directing agents (OSDAs) is of paramount importance in the final properties of zeolites, particularly the framework and porosity. Recently, the use of P-containing OSDAs has been employed for new zeolites, but there is little discussion compared to their analogues N-OSDAs. The main objective of this work is the characterization of pure silica MFI zeolite (silicalite-1) prepared by the dual-template route with tetrapropylammonium (TPA), tetrapropylphosphonium (TPP) cations, and mixtures thereof aiming to understand by advanced NMR methods how the nature of the organic influences the physico-chemical properties of the zeolite. Silicalite-1 has been successfully synthesized using the dual-template procedure with TPA and TPP molecules. Both OSDAs are incorporated into the zeolite without any specific preference, differently to that observed before for the TEA/TEP system, and homogenously mixed inside of the zeolite voids. The presence of TPP leads to the incorporation of less F, raising the concentration of Q(3)-defective sites in the silicalite-1 zeolites. Detailed NMR results indicate that those structural defects are close to the -CH3 group of the entrapped OSDAs in the zeolite and these defects consist of at least two silanol groups stabilizing the Si-O- species, which is responsible for the charge balancing., This research was funded by Spanish Ministry of Sciences, Innovation and Universities (MCIU), State Research Agency (AEI), and the European Fund for Regional Development (FEDER) via projects RTI2018-101784-B-I00 and Program Severo Ochoa SEV-2016-0683. J.M.-O. was founded through the Severo Ochoa Program for a predoctoral fellowship SEV-2012-0267-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

AgY zeolite as catalyst for the selective catalytic oxidation of NH3

  • Martinez-Ortigosa, Joaquin
  • Lopes, Christian W.
  • Agostini, Giovanni
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] Ag-exchanged Y zeolites (Si/Al = 2.5; Ag/Al = 0.30-0.95) have been tested in the NH3-SCO reaction, the most promising method for the elimination of ammonia emissions, and deeply characterized before and after reaction by using a variety of techniques (XRD, TEM, UV-Vis, Ag-109 NMR, XAS spectroscopies). The most active centres for the NH3-SCO reaction are Ag-0 nanoparticles (NPs) formed under reduction conditions and both activity and selectivity to N-2 increase with the silver loading. The Ag-0 NPs are dramatically modified under reaction conditions, being most of them dispersed resulting in small clusters and even atomically Ag+ cations, the latter accounting for around half silver atoms. The presence of water into the reaction feed promotes the dispersion and oxidation of silver nanoparticles, but the catalyst performance is only slightly affected. The results are fully consistent with the previously proposed i-SCR mechanism for NH3-SCO reaction on silver catalysts., Financial support by the Ministerio de Ciencia e Innovacion (MICINN) of Spain through the Severo Ochoa (SEV-2016-0683) , RTI2018-101784-B-I00, RTI2018-09639-A-I00 and InnovaXN-26-2019 projects is gratefully acknowledged. The authors also thank the Microscopy Service of the Universitat Politecnica de Valencia for its assistance in microscopy characterization (TEM and FESEM equipment preparation) . C. W. Lopes (Science without Borders Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship and J. Martinez-Ortigosa (SEV-2012-0267-02) is grateful to Severo Ochoa Program for a predoctoral fellowship. The authors also want to thank the ALBA synchrotron and CL AE SS beamline staff for providing beamtime (proposal 2017092477) and for setting the beamline up to perform these studies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of zeolite structure on the selective catalytic reduction of NO with ammonia over Mn-Fe supported on ZSM-5, BEA, MOR and FER

  • Ben-Younes, Nada
  • Martinez-Ortigosa, Joaquin
  • Marie, Olivier
  • Mhamdi, Mourad
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
[EN] A series of catalysts based on Mn-Fe loaded zeolites was prepared by impregnation and their activity in the selective catalytic reduction of NO with ammonia (NH3-SCR) was investigated. The highest catalytic conversion was recorded for MnFe-ZSM-5 (MnFe-Z), followed by MnFe-BEA (MnFe-B) and MnFe-MOR (MnFe-M), while MnFe-FER (MnFe-F) showed a very poor activity over the entire temperature range. In order to evidence a correlation between the structure and acidity of the zeolites and NO conversion, the prepared samples were characterized by various techniques (ICP-AES, N-2 physisorption at 77 K, XRD, (NMR)-N-27, Raman, FTIR spectroscopy of adsorbed ammonia, H-2-TPR, DRS UV-Vis, EPR and XPS). The superior catalytic activity of MnFe-Z at low temperature is attributed to the abundance of Mn4+ concentration as revealed by XPS, the highest NH3-L/NH4+ ratio indicative of the contribution of metals in generating Lewis acidic centers as evidenced by IR-NH3, and the better reducibility of manganese and iron on ZSM-5 which increases the kinetics for red-ox cycles as confirmed in TPR analysis. Fe3Mn3O8 mixed oxide phase is also detected by XRD and XPS and can be associated with the high reducibility of MnFe-Z which generates a high oxidation ability favoring NO to NO2 oxidation. Raman spectroscopy was also used to confirm the existence of a strong synergy between metals and ZSM-5 support revealed by the shift in the signal position and the decrease in band intensities. The results showed that the zeolite framework and acidity generate catalysts with different textural and structural properties which influence the metal dispersion and speciation and hence influence the catalytic performances., Financial support by the MINECO of Spain through the Severo Ochoa (SEV-2016-0683) and RTI2018-101784-B-I00 projects is gratefully acknowledged. J.M.-O. (SEV-2012-0267-02) is grateful to the Severo Ochoa Program for a predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Silver exchanged zeolites as bactericidal additives in polymeric materials

  • Cerrillo, J. L.
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] In this work, different Ag-zeolites have been evaluated as biocide materials against two common bacteria, displaying an excellent bactericidal activity in different media. The results demonstrate that the amount of silver, the type of zeolitic structure and the zeolite Si/Al ratio strongly influence on their bactericidal activity. The higher Ag amount, the better antimicrobial activity. Also, zeolites having large pore openings and Si/Al ratio close to 2 have shown the highest biocidal activity. The characterization of Ag-zeolites by different techniques shows that the incorporation of Ag at the zeolites does not alter the zeolite structure and that Ag is incorporated as Ag+ cations. The most promising Ag-zeolites with a Si/Al ratio of 2 were introduced in a polymer matrix of polypropylene, showing very high biocide activity against S.aureus. The applicability of the resulting Ag-zeolite-polymer material is limited because its darkening due to the presence of reduced silver species. The incorporation of a photo-stabilizer does not decrease the biocide activity, while maintains the original color of the polypropylene polymer. It has been shown that lixiviated Ag+ cations are the biocide active species. These Ag-species are released even when the Ag-zeolite is incorporated into the polymer, providing bactericide effects to the final Ag-zeolite-polymer composite., The authors thank the Ministerio de Ciencia, Innovaci.on y Universidades, Agencia Estatal de Investigaci.on and Fondo Europeo de Desarrollo Regional through RTI2018-101784-B-I00 (MCIU/AEI/FEDER, UE) and SEV-2016-0683 for the financial support. J.L. Cerrillo wishes to thank MINECO for the Severo Ochoa PhD fellowship (SVP2014-068600).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Influence of the Support Nature and the Metal Precursor in the Activity of Pd-based Catalysts for the Bromate Reduction Reaction

  • Cerrillo, José L.
  • Lopes, Christian W.
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Palladium catalysts supported on different materials (alumina, activated carbon and mixed oxide derived from hydrotalcite) and prepared with different metal precursors (nitrate, chloride and acetate) have been characterized and tested for the bromate reduction reaction. The catalytic behavior depends on the support nature and on the metallic precursor used for the catalyst preparation. Pd catalyst supported on a mixed oxide has a low activity due to the high affinity of the reconstructed support for the Br- formed, preventing the reactants to approximate the active Pd sites. Pd catalyst supported on activated carbon has a surface negative charge and a microporous structure, making difficult the interaction of the active sites with the reactants. The best results are obtained with the catalyst supported on alumina due to its physical-chemical properties, i. e. mesoporosity, positive surface charge and reversible adsorption of reactants and products. These characteristics make easy bromate and H-2 adsorption on the active sites and subsequent reaction, thus resulting in a better activity. The Pd precursor salt also influences the catalytic activity as it has an effect on the Pd nanocrystal size. The best results are obtained with the metal precursor that produces homogeneous and large Pd metallic crystallites., Authors thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 (MINECO/FEDER) and SEV2016-0683 projects for the financial support. We gratefully acknowledge ALBA synchrotron for allocating beamtime and CLAESS beamline staff for their technical support during our experiment. C.W. Lopes (Science without Frontiers -Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship. J.L. Cerrillo is grateful to MINECO for the Severo Ochoa contract for PhD formation (SVP-2014-068600).The authors also wish to thank Elena Crespo and Adrian Pla for their collaboration in the experimental part of the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxidative Degradation of Trichloroethylene over Fe2O3-doped Mayenite: Chlorine Poisoning Mitigation and Improved Catalytic Performance

  • Cucciniello, Raffaele
  • Intiso, Adriano
  • Siciliano, Tiziana
  • Cerrillo, José Luis
  • Proto, Antonio
  • Rossi, Federico
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
[EN] Mayenite was recently successfully employed as an active catalyst for trichloroethylene (TCE) oxidation. It was effective in promoting the conversion of TCE in less harmful products (CO2 and HCl) with high activity and selectivity. However, there is a potential limitation to the use of mayenite in the industrial degradation of chlorinated compounds-its limited operating lifespan owing to chlorine poisoning of the catalyst. To overcome this problem, in this work, mayenite-based catalysts loaded with iron (Fe/mayenite) were prepared and tested for TCE oxidation in a gaseous phase. The catalysts were characterized using different physico-chemical techniques, including XRD, ICP, N-2-sorption (BET), H-2-TPR analysis, SEM-EDX, XPS FESEM-EDS, and Raman. Fe/mayenite was found to be more active and stable than the pure material for TCE oxidation, maintaining the same selectivity. This result was interpreted as the synergistic effect of the metal and the oxo-anionic species present in the mayenite framework, thus promoting TCE oxidation, while avoiding catalyst deactivation., This work was supported by the grants ORSA167988 and ORSA174250 funded by the University of Salerno. AEP and JLC thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 and SEV-2016-0683 for the financial support. J.L. Cerrillo wishes to thank the Spanish Ministry of Economy and Competitiveness for the Severo Ochoa PhD fellowship (SVP-2014-068600).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

AgAu nanoclusters supported on zeolites: Structural dynamics during CO oxidation

  • López-Hernández, I.
  • Truttmann, V.
  • Garcia, C.
  • W. Lopes, C.
  • Rameshan, C.
  • Stöger-Pollach, M.
  • Barrabés, N.
  • Rupprechter, G.
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] The bimetallic nanocluster catalyst structure can change during pretreatment and reaction, thus in situ characterization techniques are required for a proper analysis of the active sites. In situ XAFS and DRIFTS were used to study the dynamic evolution of the metal active sites in bimetallic AgxAu25-x nanoclusters supported on ITQ2 zeolite during CO catalytic oxidation. The activity of the bimetallic nanocluster catalyst in this reaction was significantly higher than those of supported monometallic Ag-25 and Au-25 nanoclusters. These results were explained by the formation of AgAu alloyed nanoparticles, which favoured reactant adsorption and reaction. Furthermore, the initial activity depended on the catalyst pretreatment, obtaining better conversion, at lower temperatures, with the catalyst pretreated with hydrogen than with the catalyst pretreated with oxygen. This was also associated with an easier formation of a AgAu alloy under hydrogen pretreatment at 150 degrees C. However, the alloying process seemed to be completed after reaction in both cases, i.e. for the catalyst pretreated with oxygen and with hydrogen, obtaining the same catalytic performance with both catalysts upon reuse. The activity is constant in successive reaction runs, indicating high stability of the active species formed under reaction conditions. The results have shown that the combination of catalytic studies with in situ characterization techniques provides insight into the structural dynamics of the catalysts during activation and reaction., The authors thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 (MINECO/FEDER) and SEV-2016-0683 projects for the financial support. I. Lopez Hernandez is grateful to Generalitat Valenciana and European Social Fund for the pre doctoral grant ACIF2017. C.W.L. thanks PRH 50.1 - ANP/FINEP Human Resources Program (Brazil) for the Visiting Researcher Fellowship. We gratefully acknowledge ALBA synchrotron for allocating beamtime (proposal 2015091414) and the CL AE SS beamline staff for their help and technical support during our experiment. We acknowledge support by the Austrian Science Fund (FWF) via grants DK+Solids4Fun (W1243) , Single Atom Catalysis (I 4434-N) and Elise Richter (V831-N) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Separation of biobutanol from synthetic fermentation mixtures using unidirectional small pore pure silica zeolites

  • Pérez-Botella, Eduardo
  • Claessens, Benjamin
  • Denayer, Joeri F.M.
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The adsorptive vapour phase separation of 1-butanol from a synthetic ABE (acetone, 1-butanol, ethanol) mixture has been studied for the first time on a set of unidirectional small pore pure silica zeolites with ITW, MTF, RTH and STT structures with different pore size and topology. With this systematic approach, we provide insight into the structural and surface properties that can improve the vapour phase recovery of biobutanol. The influence of operation parameters, such as the temperature (40-80 degrees C), the total flow, and presence/absence of humidity and CO2 have been studied. For this application, adsorbents need to possess pore openings with one of their di-mensions larger than 4.1 angstrom and cavities with diameters above 7 angstrom. Si-STT zeolite presents a remarkable selec-tivity towards 1-butanol, which is not affected by the presence of water or CO2 in the mixture or by an increase in the temperature. Si-STT results an excellent and robust adsorbent for this separation at conditions close to those of the headspace of the ABE fermenter, achieving purities of 90-93% at recoveries between 90 and 96%., The authors want to thank the Spanish Ministry of Science and Innovation and the Spanish Agency of Research for their funding via Project RTI2018-101784-B-I00. The Generalitat Valenciana, Conselleria d'Innovacio, Universitats, Ciencia y Societat Digital is acknowledged for their funding via project Prometeo/2021/077. EP-B acknowledges the Spanish Ministry of Education and Professional Training for the grant FPU15/01602 and the additional funding for the stay EST18/00213. Thanks to Gino V. Baron for measuring and analysing the Ar isotherms on the Si-RTH material. Very special thanks to Miguel Palomino for measuring the vapour isotherms on BelSorp Max II at the ITQ. The Mi-croscopy Service of the UPV is acknowledged for their help in sample characterisation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stereoselective, Ruthenium-Photocatalyzed Synthesis of 1,2-Diaminotruxinic Bis-amino Acids from 4-Arylidene-5(4H)-oxazolones

  • Sierra, Sonia
  • Gomez, M. Victoria
  • Jimenez, Ana I.
  • Pop, Alexandra
  • Silvestru, Cristian
  • Gomez-Bengoa, Enrique
  • Urriolabeitia, Esteban P.
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] The irradiation of (Z)-2-phenyl-4-aryliden-5(4H)-oxazolones 1 in deoxygenated CH2Cl2 at 25 degrees C with blue light (465 nm) in the presence of [Ru(bpy)(3)](BF4)(2) (5% mole ratio) as a triplet photocatalyst promotes the [2+2] photocycloaddition of the C=C bonds of the 4-arylidene moiety, thus allowing the completely regio- and stereoselective formation of cyclobutane-bis(oxazolone)s 2 as single stereoisomers. Cyclobutanes 2 have been unambiguously characterized as the mu-isomers and contain two E-oxazolones coupled in an anti-head-to-head form. The use of continuous-flow techniques in microreactors allows the synthesis of cyclobutanes 2 in only 60 min, compared with the 24-48 h required in batch mode. Ring opening of the oxazolone heterocycle in 2 with a base affords the corresponding 1,2-diaminotruxinic bis-amino esters 3, which are also obtained selectively as mu-isomers. The ruthenium complex behaves as a triplet photocatalyst, generating the reactive excited state of the oxazolone via an energy-transfer process. This reactive excited state has been characterized as a triplet diradical (3)(E/Z)-1* by laser flash photolysis (transient absorption spectroscopy). This technique also shows that this excited state is the same when starting from either (Z)- or (E)-oxazolones. Density functional theory calculations show that the first step of the [2+2] cycloaddition between (3)(E/Z)-1* and (Z)-1 is formation of the C(H)-C(H) bond and that (Z) to (E) isomerization takes place at the 1,4-diradical thus formed., The authors thank the Spanish Government for funding: Project PID2020-119636GB-I00, funded by MCIN/AEI/10.13039/501100011033; Projects PID2019-106394GB-I00/AEI/10.13039/501100011033, PID2019-110441RB-C33/AEI/10.13039/501100011033, and PID2019-110008GB-I00/AEI/10.13039/501100011033, funded by MCIN/AEI/10.13039/501100011033; Projects RTI2018-101784-B-I00, RTI2018-101033-B-I00, and CTQ2017-84825-R, funded by MCIN/AEI/10.13039/501100011033 and FEDER Una manera de hacer Europa. E.P.U., A.I.J., and S.S. thank Gobierno de Aragon-FSE (Spain, research group Aminoacidos y Peptidos E19_20R) for funding. G.S. thanks CTI-CSIC and ASIC-UPV for the use of computational facilities. E.G.-B. thanks SGIker (UPV/EHU) for providing human and computational resources. A.P. is grateful for the financial support of the Romanian Ministry of Education and Research through Grant PN-III-P1-1.1-MC-2018-2580. S.S. thanks Gobierno de Aragon-FSE for a Ph.D. fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic hydrogenation of Cl-oxyanion pollutants in water

  • Plá-Hernandez, Adrián
  • Cerrillo, José Luis
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Pt and Pd catalysts supported on alumina have been tested and characterised for the catalytic hydrogenation of chlorates at room temperature and atmospheric pressure. Metallic nanoparticles are the catalytic active species, obtaining better results with the Pt than with the Pd catalysts. It is observed that the activity of the Pt catalysts depends on the metal precursor used for their preparation and the calcination temperature as these factors lead to different platinum dispersion on the alumina surface. The best results were obtained with the catalysts prepared from metal precursors containing Cl atoms and calcined at lower temperatures, as smaller metallic crystallites are formed. The chlorate reduction profiles displayed a pseudo-first order kinetic towards chlorate. The optimised catalyst was tested for the reduction of the different Cl-oxyanions, proving that the reaction rate depends on the chlorine valence of the ion following this order: ClO4- < ClO3- < ClO2- . This is due to the different molecular geometry of the anions that results in different stability of the ClOx -. The optimised catalyst was fully stable in successive uses, being active for the simultaneous reduction of chlorate, chlorite and bromate in water., The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033, and TED2021-131715B-I00 grant funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR) are gratefully acknowledged. Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. A. Pla-Hernandez thanks Spanish Ministry of Science and Innovation for the pre-doctoral grant PRE2019-088100, associated with the project RTI2018-101784-B-I00. Finally, we thank Raphael Scherbauer and Josephine Goethals for collaborating on the catalytic experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Versatile phosphorus-structure-directing agent for direct preparation of novel metallosilicate zeolites with IFW-topology

  • Simancas, Raquel
  • Nishitoba, Toshiki
  • Park, Sungsik
  • Kondo, Junko N.
  • Gies, Hermann
  • Yokoi, Toshiyuki
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] To fabricate a novel metallosilicate zeolite with a tridirectional pore system of 8- and 10-ring channels, direct incorporation of B, Al and Ga into small and medium pore ITQ-52 zeolite with the IFW-type topology was carried out using a phosphorus-containing organic structure-directing agent (P-OSDA, 1,4-butanediylbis[tris(dimethylamino)]phosphonium hydroxide). The solids were characterized by XRD, FT-IR, 11B, 27Al, 31P and 71Ga MAS NMR spectroscopy before and after post-synthesis treatments and steaming. It was found that the P-species derived from OSDA were decomposed by heat treatments, forming extra-framework phosphates that remain in the cavities of the zeolite. The presence of P-species not only stabilized the Al or Ga located in framework positions which adopted a reversible octahedral configuration but also decreased the acid strength of the zeolites. The catalytic performance of the Al- and Ga-containing ITQ-52 zeolites in the MTO reaction was investigated. We have found that the presence of P in ITQ-52 enhanced the catalytic life time, and that the optimum P content for the samples with Si/Al = 120 and Si/Ga = 135 were found to be P/Al = 0.17 and P/Ga = 0.14, respectively, showing a propene selectivity higher than 35%., This work was supported by Tokyo Tech World Research Hub Initiative (WRHI) Program of Institute of Innovative Research, Tokyo Institute of Technology; MINECO of Spain through the Severo Ochoa (SEV-2016-0683) and RTI2018-101784-B-I00 projects.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Diffusion Path Reversibility Confirms Symmetry of Surface Barriers

  • Sastre, Germán
  • Kärger, J
  • Ruthven, D.M.
The mass transfer resistance encountered by guest molecules entering or leaving a microporous host material (the >surface barrier>) is often comparable with or even greater than the internal diffusional resistance and therefore has a major effect on the overall rate of molecular uptake and release. However, direct measurement of surface resistance is difficult and this has impeded our understanding of this phenomenon. It has recently been suggested that surface resistance may be asymmetric-greater for a molecule leaving the pore than for the one that is entering. To investigate this hypothesis, we have carried out molecular dynamics simulations with a model system, methane in silicalite with partial pore blocking at the external surface. The results confirm complete symmetry of the diffusion paths for adsorption and desorption and therefore of the surface resistance, in accordance with the principle of microscopic reversibility., MINECO of Spain is thanked for funding through “Severo Ochoa” (SEV-2016-0683) and RTI2018-101784-B-I00 projects. G.S. thanks the CTI-CSIC and ASIC-UPV for the use of computational facilities. J. K. and D.M.R. acknowledge financial support by the Alexander von Humboldt Foundation and the Fonds der Chemischen Industrie.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Use of Alkylarsonium Directing Agents for the Synthesis and Study of Zeolites

  • Sáez-Ferre, S.
  • Lopes, C.W.
  • Vidal-Moya, Alejandro
  • Blasco, Teresa
  • Agostini, G.
  • Mínguez Espallargas, Guillermo
  • Jordá Moret, José Luis
  • Rey García, Fernando
  • Oña-Burgos, Pascual
  • Simancas, Jorge
Expanding the previously known family of -onium (ammonium, phosphonium, and sulfonium) organic structure-directing agents (OSDAs) for the synthesis of zeolite MFI, a new member, the arsonium cation, is used for the first time. The new group of tetraalkylarsonium cations has allowed the synthesis of the zeolite ZSM-5 with several different chemical compositions, opening a route for the synthesis of zeolites with a new series of OSDA. Moreover, the use of As replacing N in the OSDA allows the introduction of probe atoms that facilitate the study of these molecules by powder X-ray diffraction (PXRD), solid-state nuclear magnetic resonance (MAS NMR), and X-ray absorption spectroscopy (XAS). Finally, the influence of trivalent elements such as B, Al, or Ga isomorphically replacing Si atoms in the framework structure and its interaction with the As species has been studied. The suitability of the tetraalkylarsonium cation for carrying out the crystallization of zeolites is demonstrated along with the benefit of the presence of As atoms in the occluded OSDA, which allows its advanced characterization as well as the study of its evolution during OSDA removal by thermal treatments., Program Severo Ochoa SEV-2016-0683 and Maria de Maeztu MDM-2015-0538 are gratefully acknowledged. S.S-F. thanks MEC for his Severo Ochoa Grant SPV-2013-067884, P.O.-B. and G.M.E. thank MEC for his Ramjn y Cajal contracts (RYC-2014- 16620 and RYC-2013-14386). The authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, RTI2018-101784-B-I00 and CTQ2017-89528-P) and the Generalitat Valeciana (PROMETEO/2017/066). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. We gratefully acknowledge ESRF synchrotron for allocating beamtime (proposal CH-5193), the Italian CRG beam-line at ESRF (LISA-BM08), and Alessandro Puri for the help and technical support during our experiment. C.W.L. (Science without Frontiers—Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalt Metal-Organic Framework Based on Two Dinuclear Secondary Building Units for Electrocatalytic Oxygen Evolution

  • Gutiérrez-Tarriño, S.
  • Olloqui-Sariego, José Luis
  • Calvente, Juan José
  • Palomino, Miguel
  • Mínguez Espallargas, Guillermo
  • Jordá Moret, José Luis
  • Rey García, Fernando
  • Oña-Burgos, Pascual
The synthesis of a new microporous metal-organic framework (MOF) based on two secondary building units, with dinuclear cobalt centers, has been developed. The employment of a well-defined cobalt cluster results in an unusual topology of the Co-MOF, where one of the cobalt centers has three open coordination positions, which has no precedent in MOF materials based on cobalt. Adsorption isotherms have revealed that Co-MOF is in the range of best CO adsorbents among the carbon materials, with very high CO/CH selectivity. On the other hand, dispersion of Co-MOF in an alcoholic solution of Nafion gives rise to a composite (Co-MOF@Nafion) with great resistance to hydrolysis in aqueous media and good adherence to graphite electrodes. In fact, it exhibits high electrocatalytic activity and robustness for the oxygen evolution reaction (OER), with a turnover frequency number value superior to those reported for similar electrocatalysts. Overall, this work has provided the basis for the rational design of new cobalt OER catalysts and related materials employing well-defined metal clusters as directing agents of the MOF structure., The authors thank Prof. Avelino Corma for discussion and support, and J. Mazarío for XPS analysis and discussion. Program Severo Ochoa SEV-2016-0683 is gratefully acknowledged. S.G.-T. thanks MINECO for a FPU Ph.D. fellowship FPU16/02117. P.O.-B. thanks MEC for his Ramón y Cajal contract RYC-2014-16620. The authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, RTI2018-101784-B-I00, and CTQ2014-52641-P). In addition, P.O.-B. thanks UPV for his grant PAID-06-18/SP20180172. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxidative degradation of trichloroethylene over Fe2O3-doped mayenite: Chlorine poisoning mitigation and improved catalytic performance

  • Cucciniello, R.
  • Intiso, A.
  • Siciliano, T.
  • Palomares Gimeno, Antonio Eduardo
  • Martínez Triguero, Joaquín
  • Cerrillo, J.L.
  • Proto, A.
  • Rossi, F.
Mayenite was recently successfully employed as an active catalyst for trichloroethylene (TCE) oxidation. It was effective in promoting the conversion of TCE in less harmful products (CO and HCl) with high activity and selectivity. However, there is a potential limitation to the use of mayenite in the industrial degradation of chlorinated compounds-its limited operating lifespan owing to chlorine poisoning of the catalyst. To overcome this problem, in this work, mayenite-based catalysts loaded with iron (Fe/mayenite) were prepared and tested for TCE oxidation in a gaseous phase. The catalysts were characterized using different physico-chemical techniques, including XRD, ICP, N-sorption (BET), H-TPR analysis, SEM-EDX, XPS FESEM-EDS, and Raman. Fe/mayenite was found to be more active and stable than the pure material for TCE oxidation, maintaining the same selectivity. This result was interpreted as the synergistic effect of the metal and the oxo-anionic species present in the mayenite framework, thus promoting TCE oxidation, while avoiding catalyst deactivation., This work was supported by the grants ORSA167988 and ORSA174250 funded by the University of Salerno. AEP and JLC thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 and SEV-2016-0683 for the financial support. J.L. Cerrillo wishes to thank t
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ce-modified zeolite BEA catalysts for the trichloroethylene oxidation. The role of the different and necessary active sites

  • Kinga Gołąbek
  • Palomares Gimeno, Antonio Eduardo
  • Martínez Triguero, Joaquín
  • Tarach, K.A.
  • Krzysztof Kruczała
  • Gora-Marek, K.
This paper reports the activity of different Ce-BEA zeolites for the catalytic oxidation of trichloroethylene and it is focused on determining the nature of the catalyst active sites. The study was made by using a microporous zeolite BEA, two types of desilicated BEA zeolites and mildly steamed desilicated BEA zeolites. The catalysts were prepared by introducing Ce to the zeolites with incipient wetness impregnation and their structural, textural, and acidic properties were established. The evolution of TCE conversion was correlated with the physicochemical properties of the zeolites. It is shown that highly developed mesopore surface area, well-dispersed cerium species and a high number of Brønsted sites results in the highest activity. The activity and selectivity of the Ce-loaded zeolites were found to be dependent on the number of high strength Brønsted acid centres. The hierarchical materials with a higher density of hydroxyls showed higher yields to HCl while the formation of chlorine was prevented., The work was financed by the Grant No. <GN1>2015/18/E/ST4/00191 from the N</GN1>ational Science Centre, Poland. J.M-T. and A.E.P thank Spanish Governmentthrough “Severo Ochoa” <GN2>SEV-2016-0683, <GN2>RTI2018-099668-B-C21, <GN2>RTI2018-101784-B-I00 and the F</GN2></GN2></GN2>undación Ramón Arecesthrough a research contract of the “Life and Materials Science” program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of the silver species nature in Ag-ITQ2 zeolites by the CO oxidation reaction

  • López-Hernández, I.
  • García, C.
  • Truttmann, V.
  • Pollitt, S.
  • Barrabés, N.
  • Rupprechter, G.
  • Rey García, Fernando
  • Palomares Gimeno, Antonio Eduardo
Silver containing zeolites are widely used in heterogeneous catalysis and their catalytic performance is strongly dependent on the nature of the metal species supported on the zeolites. In this work, Ag-ITQ2 zeolites have been prepared by different methods: incipient wetness impregnation, ion exchange and preformed Ag-nanoclusters supported on the zeolite. The samples have been pretreated with oxygen or hydrogen previously to the catalytic test in the CO oxidation reaction. The results allow to correlate the nature of the Ag-species with its catalytic activity in this reaction as metallic silver is active for the CO oxidation but cationic silver does not show significant activity. It is shown that Ag is formed on the catalysts prepared by impregnation even without a reduction treatment. On the contrary, Ag-nanoclusters form stable partially charged silver species that only can be reduced to Ag nanoparticles under severe thermal conditions. Silver species formed in the catalysts prepared by ion exchange also present a partial positive charge. We concluded that this reaction is a useful test for monitoring the nature and evolution of silver species in the zeolite and to determine the stability of the silver nanoclusters., The authors thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 (MINECO/FEDER) and SEV-2016-0683 projects for the financial support. We gratefully acknowledge ALBA synchrotron for allocating beamtime (proposal 2015091414) and the CLÆSS beamline staff for their help and technical support during our experiment. CG and NB thank the TUW Innovative Project GIP165CDGC. CG, SP, VT, NB and GR are thankful for financial support from the Austrian Science Fund (FWF) through projects DK + Solids4Fun (W1243) and ComCat (I 1041-N28). I. López Hernández is grateful to Generalitat Valenciana and European Social Fund for the pre doctoral grant ACIF2017.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preparation of continuous highly hydrophobic pure silica ITQ-29 zeolite layers on alumina supports

  • Palomino, Miguel
  • Ono, H.
  • Valencia, Susana
  • Corma, Avelino
The preparation of continuous layers of highly hydrophobic pure silica ITQ-29 zeolite, potentially applicable as hydrophobic membranes for separation of molecules based on their polarity, has been investigated. Continuous layers of intergrown ITQ-29 zeolite crystals were successfully grown on porous alumina supports by optimization of the synthesis conditions, such as the appropriate selection of the seeds, the procedure for the gel preparation, and the calcination conditions. This resulted in the formation of all silica ITQ-29 zeolite layers without the presence of germanium required in previously reported ITQ-29 membranes, with the subsequent improvement in quality and stability, as verified by the absence of cracks after calcination. We have proved that the incorporation of aluminum from the support into the zeolite layer does not occur, neither during the secondary growth nor through migration of aluminum species during calcination., This research was funded by the European Research Council, grant ERC-AdG-2014-671093 (SynCatMatch) and the Spanish Government, through “Severo Ochoa” grant SEV-2016-0683 and RTI2018-101784-B-I00
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Identification of New Templates for the Synthesis of BEA, BEC, and ISV Zeolites Using Molecular Topology and Monte Carlo Techniques

  • Gálvez-Llompart, María
  • Gálvez, Jorge
  • Rey García, Fernando
  • Sastre, Germán
The presence of organic structure directing agents (templates) in the synthesis of zeolites allows the synthesis to be directed, in many cases, toward structures in which there is a large stabilization between the template and the zeolite micropore due to dispersion interactions. Although other factors are also important (temperature, pH, Si/Al ratio, etc.), systems with strong zeolite-template interactions are good candidates for an application of new computational algorithms, for instance those based in molecular topology (MT), that can be used in combination with large databases of organic molecules. Computational design of new templates allows the synthesis of existing and new zeolites to be expanded and refined. Three zeolites with similar 3-D large pore systems, BEA, BEC, and ISV, were selected with the aim of finding new templates for their selective syntheses. Using a training set of active and inactive templates (obtained from the literature) for the synthesis of target zeolites, it was possible to select chemical descriptors related to activity, meaning a good candidate template. With a discriminant function defined upon MT, the screening through a database of organic molecules led to a small subset (preselection) of candidate templates for the synthesis of BEA, BEC, and ISV. As far as we know, this is the first time that topological/topochemical descriptors, which do not consider 3-D information on the molecules, have been used to predict the activity of zeolite structure directing agents (SDAs). Following the prediction of SDAs using MT, an automated approach of sequential template filling of micropores based on a combination of Monte Carlo and lattice energy minimization was applied for all the candidate templates in the three zeolites. Two results can be obtained from this: an evaluation of the quality of the molecular topology QSAR models leading to the preselection of templates, and a final selection of candidate templates for the selective synthesis of BEA, BEC, and ISV. Regarding the latter, a good template will be that which maximizes the zeolite-template dispersion interactions with one, and only one, of the three zeolites. The presented methodology can be used to find alternative (maybe cheaper or perhaps more selective) templates than those already known., We thank MICINN of Spain for funding through Projects RTI2018-101784-B-I00, RTI2018-101033-B-I00, and SEV-2016-0683. M.G.-L. thanks GVA for postdoctoral Contract APOSTD/2019/055. The authors thank ASIC-UPV and SGAI-CSIC for the use of their computational facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of Hydronium Formation in Water-Chabazite Zeolite Using Inelastic Neutron Scattering Experiments and ab Initio Molecular Dynamics Simulations

  • Jiménez-Ruiz, M.
  • Gahle, D. S.
  • Lemishko, T.
  • Valencia, Susana
  • Sastre, Germán
  • Rey García, Fernando
A combined study of inelastic neutron scattering and ab initio molecular dynamics simulations has been performed in order to study the water-acid site interaction in zeolite chabazite with a ratio Si/Al = 16 that corresponds to 2 protons/uc with two different water coverages with the number of water molecules being lower and higher than that of proton sites. These results have provided a clear picture of the water-acid site interaction, and it has been demonstrated that there are two regimens of water adsorption, which depend on the water loading. (i) At low water coverage (water/acid site ∼0.5), the main interactions between water and the zeolitic acid sites are established through hydrogen bond and there is no proton transference to water. (ii) At relatively high water loading (water/acid site ∼3), the clustering of water molecules and hydronioum cations formed by the complete transference of the zeolitic proton to the water molecules has been observed. The formation of water-hydronium clusters interacting with oxygen atoms of the zeolite framework provides the stabilization energy needed for the protonation of water molecules confined in the cavities of chabazite. These results are the experimental evidence obtained from INS of proton transfer from the zeolitic acid site and the hydronium formation and are in agreement with a previous computational study (Phys. Chem. Chem. Phys. 2009, 11, 1702-1712) and very recent solid state NMR spectroscopy studies (J. Am. Chem. Soc. 2019, 141, 3444-3455). The inspection of the low energy bands (translational and optic modes) and librational bands of the experimental results allows obtaining information about the H-bond network of the hydronium-water cluster., We thank MICINN of Spain for funding through ProjectsRTI2018-101784-B-I00 and SEV-2016-0683. The authorsthank the ILL for neutron beam-time allocation (experiment7-05-456) and the ILL C-Lab for support. A. Moraleda isacknowledged for the synthesis of CHA-16. G.S. and T.L.thank the ILL for the provision of Contract SRH/GRI/AS-15/222 and a Ph.D. contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Computational Screening of Structure-Directing Agents for the Synthesis of Pure Silica ITE Zeolite

  • León, Santiago
  • Sastre, Germán
"Shape" was the first criterion claimed to explain the specificity between organic structure-directing agents (OSDAs) and zeolite micropores. With the advent of computational chemistry methods applied to study the effectiveness of SDA-zeolite combinations, "energy" (mainly van der Waals) became the most commonly invoked concept to explain the zeolite phase selectivity. The lower the energy, the better the SDA. In this study, we rescue the concept of shape, and we combine it with the concept of energy within the frame of a SDA screening approach to identify new SDAs for the synthesis of cage-based ITE zeolite. Once we identify an appropriate shape fingerprint, filtering through the SDA database can be done quickly and accurately. With the shape selection, an automated Monte Carlo software allows us to assess the suitability using the force-field-calculated zeo-SDA energy. The computational approach can be promptly applied to other cage-based zeolites., We thank MICINN of Spain for funding through projects RTI2018-101784-B-I00, RTI2018-101033-B-I00, and SEV-2016-0683. S.L. thanks MICINN for the predoctoral grant BES-2017-081245 corresponding to project SEV-2016-0683-17-2. Prof. A. Corma is acknowledged for collaboration from the SEV-2016-0683 project. We thank ASIC-UPV for the use of their computational facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nature and evolution of Pd catalysts supported on activated carbon fibers during the catalytic reduction of bromate in water

  • Cerrillo, J.L.
  • Lopes, Christian W.
  • Rey García, Fernando
  • Agostini, Giovanni
  • Kiwi-Minsker, L.
  • Palomares Gimeno, Antonio Eduardo
Catalytic hydrogenation of bromate using Pd catalysts supported on activated carbon fibers is a smart solution to treat bromate polluted water. These catalysts have been analyzed by different techniques for an in-deep characterization of the active sites. Thein situX-ray absorption spectroscopy and the CO chemisorption studies showed that Pdnanoparticles with different crystal sizes were generated on the support during hydrogen activation at 200 °C and that the PdH-phase was formed during the cooling to room temperature. As PdHspecies formed on Pdnanoparticles are responsible for bromate reduction, the most active catalysts are those having Pdnanoparticles with large crystal sizes, where PdHspecies are easily formed. The catalysts are fully stable in succesive reaction runs. It has been also shown that bromate reduction rate depends on the bromate concentration and on the hydrogen partial pressure, with a pseudo-first reaction order towards both reactants., Authors thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 (MINECO/FEDER) and SEV-2016-0683 projects for the financial support. We gratefully acknowledge ALBA synchrotron for allocating beamtime (proposal 2015091414) and CLÆSS beamline staff for their technical support during our experiment. C. W. Lopes (Science without Frontiers – Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship. J. L. Cerrillo is grateful to MINECO for the Severo Ochoa contract for PhD formation (SVP-2014-068600). L. Kiwi-Minsker acknowledges financial support provided by Russian Science Foundation (project 15-19-20023). Authors also thank Kynol Europa GmbH for the supply of the activated carbon fibers.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Silver exchanged zeolites as bactericidal additives in polymeric materials

  • Cerrillo, J.L.
  • Palomares Gimeno, Antonio Eduardo
  • Rey García, Fernando
In this work, different Ag-zeolites have been evaluated as biocide materials against two common bacteria, displaying an excellent bactericidal activity in different media. The results demonstrate that the amount of silver, the type of zeolitic structure and the zeolite Si/Al ratio strongly influence on their bactericidal activity. The higher Ag amount, the better antimicrobial activity. Also, zeolites having large pore openings and Si/Al ratio close to 2 have shown the highest biocidal activity. The characterization of Ag-zeolites by different techniques shows that the incorporation of Ag at the zeolites does not alter the zeolite structure and that Ag is incorporated as Ag cations. The most promising Ag-zeolites with a Si/Al ratio of 2 were introduced in a polymer matrix of polypropylene, showing very high biocide activity against S.aureus. The applicability of the resulting Ag-zeolite-polymer material is limited because its darkening due to the presence of reduced silver species. The incorporation of a photo-stabilizer does not decrease the biocide activity, while maintains the original color of the polypropylene polymer. It has been shown that lixiviated Ag cations are the biocide active species. These Ag-species are released even when the Ag-zeolite is incorporated into the polymer, providing bactericide effects to the final Ag-zeolite-polymer composite., The authors thank the Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional through RTI2018-101784-B-I00 (MCIU/AEI/FEDER, UE) and SEV-2016-0683 for the financial support. J.L. Cerrillo wishes to thank MINECO for the Severo Ochoa PhD fellowship (SVP-2014-068600).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The influence of the support on the activity of mn–fe catalysts used for the selective catalytic reduction of NOx with ammonia

  • López-Hernández, I.
  • Mengual, J.
  • Palomares Gimeno, Antonio Eduardo
Mono and bimetallic Mn–Fe catalysts supported on different materials were prepared and their catalytic performance in the NH–SCR of NO was investigated. It was shown that Mn and Fe have a synergic effect that enhances the activity at low temperature. Nevertheless, the activity of the bimetallic catalysts depends very much on the support selected. The influence of the support on the catalyst activity has been studied using materials with different textural and acid–base properties. Microporous (BEA-zeolite), mesoporous (SBA15 and MCM41) and bulk (metallic oxides) materials with different acidity have been used as supports for the Mn–Fe catalysts. It has been shown that the activity depends on the acidity of the support and on the surface area. Acid sites are necessary for ammonia adsorption and high surface area produces a better dispersion of the active sites resulting in improved redox properties. The best results have been obtained with the catalysts supported on alumina and on beta zeolite. The first one is the most active at low temperatures but it presents some reversible deactivation in the presence of water. The Mn–Fe catalyst supported on beta zeolite is the most active at temperatures higher than 350C, without any deactivation in the presence of water and with a 100% selectivity towards nitrogen., This research was funded by the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER), projects RTI2018-101784-B-I00 and RTI2018-101033-B-100 and by Generalitat Valenciana and European Social Fund, the pre doctoral grant ACIF2017.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalt metal-organic framework based on layered double nanosheets for enhanced electrocatalytic water oxidation in neutral media

  • Gutiérrez-Tarriño, S.
  • Olloqui-Sariego, José Luis
  • Calvente, J.J.
  • Espallargas, G.M.
  • Rey García, Fernando
  • Corma, Avelino
  • Oña-Burgos, Pascual
A new cobalt metal-organic framework (2D-Co-MOF) based on well-defined layered double cores that are strongly connected by intermolecular bonds has been developed. Its 3D structure is held together by π-π stacking interactions between the labile pyridine ligands of the nanosheets. In aqueous solution, the axial pyridine ligands are exchanged by water molecules, producing a delamination of the material, where the individual double nanosheets preserve their structure. The original 3D layered structure can be restored by a solvothermal process with pyridine, so that the material shows a "memory effect"during the delamination-pillarization process. Electrochemical activation of a 2D-Co-MOF@Nafion-modified graphite electrode in aqueous solution improves the ionic migration and electron transfer across the film and promotes the formation of the electrocatalytically active cobalt species for the oxygen evolution reaction (OER). The so-activated 2D-Co-MOF@Nafion composite exhibits an outstanding electrocatalytic performance for the OER at neutral pH, with a TOF value (0.034 s-1 at an overpotential of 400 mV) and robustness superior to those reported for similar electrocatalysts under similar conditions. The particular topology of the delaminated nanosheets, with quite distant cobalt centers, precludes the direct coupling between the electrocatalytically active centers of the same sheet. On the other hand, the increase in ionic migration across the film during the electrochemical activation stage rules out the intersheet coupling between active cobalt centers, as this scenario would impair electrolyte permeation. Altogether, the most plausible mechanism for the O-O bond formation is the water nucleophilic attack to single Co(IV)-oxo or Co(III)-oxyl centers. Its high electrochemical efficiency suggests that the presence of nitrogen-containing aromatic equatorial ligands facilitates the water nucleophilic attack, as in the case of the highly efficient cobalt porphyrins., Programs Severo Ochoa SEV-2016-0683 and María de Maeztu CEX2019-000919-M are gratefully acknowledged. S.G.-T. thanks the MINECO for her FPU Ph.D. contract FPU16/02117. P.O.-B. and G.M.E. thank MICCIN for their Ramón y Cajal contracts RYC-2014-16620 and RYC-2013-14386. The authors acknowledge the financial support by the Spanish Government (RTI2018-096399-A-I00, RTI2018-101784-B-I00, CTQ2017-89528-P, and CTQ2014-52641-P) and Generalitat Valenciana (PROMETEU/2019/066). In addition, P.O.-B. thanks UPV for his grant PAID-06-18/SP20180172. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

AgY zeolite as catalyst for the selective catalytic oxidation of NH3

  • Martinez-Ortigosa, Joaquin
  • Lopes, Christian W.
  • Agostini, Giovanni
  • Palomares Gimeno, Antonio Eduardo
  • Blasco, Teresa
  • Rey García, Fernando
Ag-exchanged Y zeolites (Si/Al = 2.5; Ag/Al = 0.30–0.95) have been tested in the NH–SCO reaction, the most promising method for the elimination of ammonia emissions, and deeply characterized before and after reaction by using a variety of techniques (XRD, TEM, UV–Vis, Ag NMR, XAS spectroscopies). The most active centres for the NH–SCO reaction are Ag nanoparticles (NPs) formed under reduction conditions and both activity and selectivity to N increase with the silver loading. The Ag NPs are dramatically modified under reaction conditions, being most of them dispersed resulting in small clusters and even atomically Ag cations, the latter accounting for around half silver atoms. The presence of water into the reaction feed promotes the dispersion and oxidation of silver nanoparticles, but the catalyst performance is only slightly affected. The results are fully consistent with the previously proposed i-SCR mechanism for NH–SCO reaction on silver catalysts., Financial support by the Ministerio de Ciencia e Innovación (MICINN) of Spain through the Severo Ochoa (SEV-2016-0683), RTI2018-101784-B-I00, RTI2018-09639-A-I00 and InnovaXN-26-2019 projects is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A multi-nuclear mas-nmr study on the structural properties of silicalite-1 zeolite synthesized using n-and p-based organic structure directing agents

  • Martinez-Ortigosa, Joaquin
  • Simancas, Jorge
  • Vidal-Moya, Alejandro
  • Rey García, Fernando
  • Valencia, Susana
  • Blasco, Teresa
The nature of organic structure directing agents (OSDAs) is of paramount importance in the final properties of zeolites, particularly the framework and porosity. Recently, the use of P-containing OSDAs has been employed for new zeolites, but there is little discussion compared to their analogues N-OSDAs. The main objective of this work is the characterization of pure silica MFI zeolite (silicalite-1) prepared by the dual-template route with tetrapropylammonium (TPA), tetrapropylphosphonium (TPP) cations, and mixtures thereof aiming to understand by advanced NMR methods how the nature of the organic influences the physico-chemical properties of the zeolite. Silicalite-1 has been successfully synthesized using the dual-template procedure with TPA and TPP molecules. Both OSDAs are incorporated into the zeolite without any specific preference, differently to that observed before for the TEA/TEP system, and homogenously mixed inside of the zeolite voids. The presence of TPP leads to the incorporation of less F, raising the concentration of Q-defective sites in the silicalite-1 zeolites. Detailed NMR results indicate that those structural defects are close to the –CH group of the entrapped OSDAs in the zeolite and these defects consist of at least two silanol groups stabilizing the Si-O species, which is responsible for the charge balancing., This research was funded by Spanish Ministry of Sciences, Innovation and Universities (MCIU), State Research Agency (AEI), and the European Fund for Regional Development (FEDER) via projects RTI2018-101784-B-I00 and Program Severo Ochoa SEV-2016-0683. J.M.-O. was founded through the Severo Ochoa Program for a predoctoral fellowship SEV-2012-0267-02.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ce-promoted Fe–Cu–ZSM-5 catalyst: SCR-NO activity and hydrothermal stability

  • Jouini, Houda
  • Mejri, Imène
  • Rhimi, Baker
  • Mhamdi, Mourad
  • Blasco, Teresa
  • Delahay, Gérard
Fe–Cu–ZSM-5 and Ce–Fe–Cu–ZSM-5 solids prepared using solid-state ion exchange method (SSIE) were tested in the NH–SCR of NO reaction and were characterized using N physisorption at 77 K, MAS Al magnetic resonance, X-ray diffraction, scanning electron microscopy, EPR spectroscopy and transmission electron microscopy coupled to energy-dispersive X-ray spectroscopy in order to follow the effect of Ce addition on the textural and structural properties of Fe–Cu–MFI system as well as the detection of the changes in local environment and state of iron and copper species, and the degradation of the zeolite texture and structure after a severe aging treatment at 850 °C for 5 h. Fresh Ce-promoted sample showed better NO conversion up to 450 °C than unpromoted Fe–Cu–ZSM-5 catalyst. An activity loss was observed on aged catalysts, but remaining less pronounced for the catalyst containing Ce. The changes in catalyst structure and texture did not occur during aging, while a probable migration of metal active species and change in their coordination has occurred., Financial support by the MINECO of Spain through the Severo Ochoa (SEV-2016-0683) and RTI2018-101784-B-I00 projects is gratefully acknowledged, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zeolite-driven Ag species during redox treatments and catalytic implications for SCO of NH3

  • Lopes, Christian W.
  • Martinez-Ortigosa, Joaquin
  • Gora-Marek, K.
  • Tarach, Karolina
  • Vidal-Moya, Alejandro
  • Palomares Gimeno, Antonio Eduardo
  • Agostini, Giovanni
  • Blasco, Teresa
  • Rey García, Fernando
Supported silver species are among the most promising catalysts for the depletion of ammonia emission by selective catalytic oxidation (NH-SCO). Here, an investigation on the influence of small pore CHA and RHO zeolite structures on the silver species formed and their catalytic activity for the NH-SCO reaction has been conducted. To this end, AgRHO(4) and AgCHA(4) zeolites with similar Si/Al molar ratios (≈ 4) and silver content (∼15 wt%, Ag/Al ≈ 0.6), and AgCHA(2) with Si/Al ≈ 2 and higher silver loading, while maintaining the Ag/Al ratio (∼26 wt%, Ag/Al ≈ 0.6), have been submitted to different treatments and characterized by using a large variety of techniques (XRD, UV-Vis,Ag NMR,in situXAS andoperandoFT-IR). The reduction of the AgCHA and AgRHO zeolites at low temperature (100-200 °C) produces silver clusters, which remain in the AgRHO zeolite when the temperature is increased to 400 °C. However, the silver species in the AgCHA zeolites evolve to nanoparticles (NPs) at 400 °C under H. The catalytic tests show that metal particles are the active sites while silver clusters are inactive for the NH-SCO reaction. Also, there are important differences in the stability of the reduced Ag species under oxidizing or under reaction conditions at 400 °C. Metal NPs are partially redispersed and oxidized to (Ag), while silver clusters are completely oxidized to Ag. Our results indicate that silver clusters are stabilized in the RHO-type and not in the CHA-type zeolite, and thus they display very different catalytic activities for the NH-SCO reaction., The authors acknowledge grant RTI2018-101784-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Also, the project SEV-2016-0683 funded by MCIN/AEI/10.13039/501100011033 is acknowledged. The project Prometeo/2021/077, Conselleria de Educación, Cultura y Deporte de la Generalitat Valenciana is also acknowledged. K. G.-M. acknowledges Grant No. 2015/18/E/ST4/00191 from the National Science Centre, Poland. K. T. acknowledges the scholarship within the Bekker Programme (PPN/BEK/2018/1/00406) from the Polish National Agency for Academic Exchange. C. W. Lopes (Science without Frontiers – Process no. 13191/13-6) thanks Coordenação de Aperfeiçoamento de Pessoal de Nível Superior – Brasil (CAPES – Finance Code 001) for the predoctoral fellowship. J. Martínez-Ortigosa (SEV-2012-0267-02) acknowledges the Severo Ochoa Program for a predoctoral fellowship. We gratefully acknowledge the ALBA synchrotron for allocating beamtime (proposals 2016021665 and 2017032119), CLÆSS beamline staff, and particularly Carlo Marini for their help and technical support during our experiment
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ITQ-69: A Germanium-Containing Zeolite and its Synthesis, Structure Determination, and Adsorption Properties

  • Sala, Andrés
  • Perez-Botella, Eduardo
  • Jordá Moret, José Luis
  • Cantín, Ángel
  • Rey García, Fernando
  • Valencia, Susana
In this work, a new zeolite named as ITQ-69, has been synthesized, characterized and its application as selective adsorbent for industrially relevant light olefins/paraffins separations has been assessed. This material has been obtained as pure germania as well as silica-germania zeolites with different Si/Ge ratios using a diquaternary ammonium cation as organic structure directing agent. Its structure was determined by single-crystal X-Ray diffraction showing a triclinic unit cell forming a tridirectional small pore channel system (8×8×8R). Also, it has been found that Si preferentially occupies some special T sites of the structure as deduced from Rietveld analysis of the powder X-ray diffraction patterns. In addition, the new zeolite ITQ-69 has been found to be stable upon calcination and thus, its adsorption properties were evaluated, showing a promising kinetic selectivity for light olefin separations in the C3 fraction., The authors acknowledge the Spanish Ministry of Science, Innovation and Universities (MCIU) for their funding via project RTI2018-101784-B-I00 and Program Severo Ochoa SEV-2016-0683. AS and EPB thanks for their grants BES-2016–078684 and FPU15/01602, respectively. The Microscopy Service of the UPV is acknowledged for their help in sample characterization. By last, authors would like to thank the use of RIAIDT-USC analytical facilities, especially to Dr. Antonio L. Llamas for extremely useful comments on SCXRD analyses.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergistically enhance confined diffusion by continuum intersecting channels in zeolites

  • Liu, Zhiqiang
  • Yuan, Jiamin
  • Van Baten, J. M.
  • Zhou, Jian
  • Tang, X.
  • Zhao, Chao
  • Chen, Wei
  • Yi, Xianfeng
  • Krishna, R.
  • Sastre, Germán
  • Zheng, Anmin
In separation and catalysis applications, adsorption and diffusion are normally considered mutually exclusive. That is, rapid diffusion is generally accompanied by weak adsorption and vice versa. In this work, we analyze the anomalous loading-dependent mechanism of p-xylene diffusion in a newly developed zeolite called SCM-15. The obtained results demonstrate that the unique system of “continuum intersecting channels” (i.e., channels made of fused cavities) plays a key role in the diffusion process for the molecule-selective pathways. At low pressure, the presence of strong adsorption sites and intersections that provide space for molecule rotation facilitates the diffusion of p-xylene along the Z direction. Upon increasing the molecular uptake, the adsorbates move faster along the X direction because of the effect of continuum intersections in reducing the diffusion barriers and thus maintaining the large diffusion coefficient of the diffusing compound. This mechanism synergistically improves the diffusion in zeolites with continuum intersecting channels., This work was supported by the National Natural Science Foundation of China (nos. 22032005, 21902180, 21802164, 21991092, 21991090, 22002174, and 91645112), the Natural Science Foundation of Hubei Province of China (2018CFA009), the Key Research Program of Frontier Sciences (CAS no. QYZDB-SSW-SLH026), Sinopec Corp. (417012-4), and the CAS Interdisciplinary Innovation Team (grant no. JCTD-2018-10). G.S. thanks the MICINN of Spain for funding through projects RTI2018-101784-B-I00, RTI2018-101033-B-I00, and SEV-2016-0683.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Computational elucidation of the aging time effect on zeolite synthesis selectivity in the presence of water and diquaternary ammonium iodide

  • Ghanbari, Bahram
  • Kazemi Zangeneh, Fatemeh
  • Sastre, Germán
  • Moeinian, Maryam
  • Marhabaie, Sina
  • Taheri Rizi, Zahra
An example of zeolite selectivity (MFI → MOR) driven by synthesis aging time has been studied. Using N,N,N′,N′-tetramethyl-N,N′-dipropyl-ethylenediammonium diiodide (TMDP) as an organic structure-directing agent (OSDA), the zeolite phases obtained at 2 h (MFI 97%), 8 h (MFI 84%, MOR 16%) and 24 h (MFI 43%, MOR 57%) have been characterized by powder X-ray diffraction. The results suggest that at intermediate aging time, namely 8 h and 24 h, the dominant phase (MFI) is displaced by MOR. Different techniques (FT-IR, Raman, 13C MAS NMR, TGA/DTG and HC microanalysis) have been employed to verify the OSDA integrity and occlusion inside the zeolite micropores as well as to quantify the water and OSDA loading. The 1H MAS NMR of the as-made occluded zeolite was compared with the spectra of TMDP and the recovered OSDA from the sample by extraction with water. The comparison indicated that TMDP was not structurally intact, indicating the chemical transformation of TMDP to imidazolinium homologues through the Hofmann degradation process. Furthermore, careful acidic breakdown of the aluminosilicate shell, covered on the zeolite samples by hydrofluoric acid, revealed that the remaining OSDA had been partially degraded to lower molecular weight ammonium salt, confirmed by 1H NMR and mass spectrometry measurements. A computational study was performed by using a force field based methodology, including accurate loading of water and OSDA in the zeolite (MFI and MOR) unit cells. The results show an important contribution of the presence of water. The samples with larger aging time (8 h and 24 h) incorporate less water and show partial TMDP degradation, whilst at the shortest aging time (2 h), there is a larger water content and TMDP remains intact. The larger accessible volume of MFI justifies that this is the dominant phase at short aging times (large water content) since it can accommodate a larger number of water molecules than MOR. The OSDA partial degradation also plays a role. At longer aging times the partial OSDA decomposition has been considered in the models by including TMDP + Imidaz, which is more stabilized by MOR, whilst at shorter aging times the only OSDA present, TMDP, is better stabilized by MFI., he financial support of the present research by the Research Office of Sharif University of Technology is gratefully acknowledged. MINECO of Spain is thanked for funding through the “Severo Ochoa” (SEV-2016-0683) and RTI2018-101784-B-I00 and RTI2018-101033-B-I00 projects. G. S. thanks the CTI-CSIC and ASIC-UPV for the use of the computational facilities. The Equipex program “Paris en Résonance” is also acknowledged for the solid state NMR facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Connecting theory and simulation with experiment for the study of diffusion in nanoporous solids

  • Bukowski, Brandon C.
  • Keil, Frerich J.
  • Ravikovitch, Peter I.
  • Sastre, Germán
  • Snurr, Randall Q.
  • Coppens, Marc-Olivier
Nanoporous solids are ubiquitous in chemical, energy, and environmental processes, where controlled transport of molecules through the pores plays a crucial role. They are used as sorbents, chromatographic or membrane materials for separations, and as catalysts and catalyst supports. Defined as materials where confinement effects lead to substantial deviations from bulk diffusion, nanoporous materials include crystalline microporous zeotypes and metal–organic frameworks (MOFs), and a number of semi-crystalline and amorphous mesoporous solids, as well as hierarchically structured materials, containing both nanopores and wider meso- or macropores to facilitate transport over macroscopic distances. The ranges of pore sizes, shapes, and topologies spanned by these materials represent a considerable challenge for predicting molecular diffusivities, but fundamental understanding also provides an opportunity to guide the design of new nanoporous materials to increase the performance of transport limited processes. Remarkable progress in synthesis increasingly allows these designs to be put into practice. Molecular simulation techniques have been used in conjunction with experimental measurements to examine in detail the fundamental diffusion processes within nanoporous solids, to provide insight into the free energy landscape navigated by adsorbates, and to better understand nano-confinement effects. Pore network models, discrete particle models and synthesis-mimicking atomistic models allow to tackle diffusion in mesoporous and hierarchically structured porous materials, where multiscale approaches benefit from ever cheaper parallel computing and higher resolution imaging. Here, we discuss synergistic combinations of simulation and experiment to showcase theoretical progress and computational techniques that have been successful in predicting guest diffusion and providing insights. We also outline where new fundamental developments and experimental techniques are needed to enable more accurate predictions for complex systems., BCB and RQS acknowledge support from the Defense Threat Reduction Agency (HDTRA1-19-1-0007). MOC gratefully acknowledges support from the EPSRC via “Frontier Engineering” and “Frontier Engineering: Progression” Awards (EP/K038656/1, EP/S03305X/1). GS thanks MICINN of Spain for funding through projects RTI2018-101784-B-I00, RTI2018-101033-B-I00, SEV-2016-0683.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Diffusivity of Propylene in One-Dimensional Medium-Pore Zeolites

  • Alaithan, Zainab A.
  • Harrison, N.
  • Sastre, Germán
One-dimensional medium-pore zeolites are promising catalysts for propylene production from naphtha cracking due to their high selectivity. However, fast deactivation due to pore mouth blockage is preventing these catalysts from being widely used in commercial applications. In this study, we used molecular dynamics simulations to investigate the diffusion of propylene in three one-dimensional medium-pore aluminosilicate frameworks (ZSM-23, ZSM-22, ZSM-48) and also in a two-dimensional pore zeolite (ZSM-5) for the sake of comparison. The influence of several factors such as loading, temperature, pore diameter, and Al/H distribution were also investigated. Our results show that at high loading and high temperature, the diffusion of propylene deviates from the Arrhenius regime, and diffusivity remains constant with temperature due to the dominant effect of propylene-propylene interactions. Also, when loadings are compared “per accessible volume”, the self-diffusivity in one-dimensional pore zeolites is similar to that of two-dimensional pore zeolites. Finally, Al/H distributions do have an influence on propylene diffusion when H-protrusions into the channel contribute to strengthening proton-propylene interactions., Z.A. thanks Saudi Aramco for the full Ph.D. scholarship and the High-Performance Computing service of Imperial College London. G.S. thanks MICINN of Spain for funding through projects RTI2018-101784-B-I00, RTI2018-101033-B-I00, and SEV-2016-0683.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Separation of an aqueous mixture of 6-kestose/sucrose with zeolites: A molecular dynamics simulation

  • Bolaño Losada, Iria
  • Grobas-Illobre, Pablo
  • Misturini, A.
  • Polaina Molina, Julio
  • Seminovski Pérez, Yohanna
  • Sastre, Germán
Extra-large pore zeolites are a small subset (21) among the whole list of 253 zeolites available. The discovery of new low-glycemic sugars is very attractive as new healthy additives in the food field. This is the case of the 6-kestose. In the present case, it appears in a mixture in aqueous solution together with sucrose, the separation of the mixture being necessary. For this, we have focused on using certain zeolites with adequate pore sizes that allow the separation of this mixture, considering that since the molecular size of 6-kestose is greater than sucrose, it is necessary to promote the sorption of the latter, so that the first can be purified. After a computational screening of micropores of the 253 IZA zeolites, 11 zeolites were selected. Of these, 3 extra-large pore zeolites (AET, DON, ETR) have been proposed, which were analyzed in-depth through a molecular dynamics study considering the external surface. The results show that DON presents the most promising theoretical results for a selective sucrose/6-kestose separation., We thank MICINN of Spain for funding through projects RTI2018-101784-B-I00, RTI2018-101033-B-I00, SEV-2016-0683 as well as ASIC-UPV and CESGA for computational facilities. IBL and PGI gratefully acknowledge CSIC for a JAE-Intro fellowship. AM thanks Generalitat Valenciana for the predoctoral fellowship GRISOLIAP/2019/084.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic Removal of Bromates from Water: A Hands-On Laboratory Experiment to Solve a Water Pollution Problem through Catalysis

  • Cerrillo, J.L.
  • López-Hernández, I.
  • Palomares Gimeno, Antonio Eduardo
Catalysis is not only one of the most crucial principles of Green Chemistry but also one of the most used industrial strategies to improve yields and to shift to more environmental-friendly processes. Due to the great importance of catalysis, we propose a laboratory activity related to heterogeneous catalysis courses (upper and undergraduate students). It involves the preparation of a catalyst, the study of its activity in a three-phase reaction, and the analysis of the results. The selected reaction is the catalytic removal of bromates in water that can be easily monitored by a simple titration method. Students will analyze the reaction products, and with the obtained data, they will work in different concepts related to catalysis. In brief, this hands-on activity enables students to apply catalysis by themselves as an effective tool to solve a water pollution problem., Authors appreciate the participation of most of the students who performed this laboratory experience and filled in the surveys permitting the evaluation of its educational benefits. Moreover, we thank Ruben Hervás for his collaboration in this study during his internship and development of his final degree project. This research was funded by the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER), Project RTI2018-101784-B-I00. I.L.-H. thanks Generalitat Valenciana and European Social Fund for the predoctoral grant ACIF2017., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Review on the Catalytic Hydrogenation of Bromate in Water Phase

  • Palomares Gimeno, Antonio Eduardo
  • Cerrillo, J.L.
The presence of bromate in water sources generates environmental concern due to its toxicity for humans. Diverse technologies, like membranes, ion exchange, chemical reduction, etc., can be employed to treat bromate-polluted water but they produce waste that must be treated. An alternative to these technologies can be the catalytic reduction of bromate to bromide using hydrogen as a reducing agent. In this review, we analyze the research published about this catalytic technology. Specifically, we summarize and discuss about the state of knowledge related to (1) the different metals used as catalysts for the reaction; (2) the influence of the support on the catalytic activity; (3) the characterization of the catalysts; (4) the reaction mechanisms; and (5) the influence of the water composition in the catalytic activity and in the catalyst stability. Based on published papers, we analyze the strength and weaknesses of this technique and the possibilities of using this reaction for the treatment of bromate-polluted water as a sustainable process., This research was funded by the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER), projects RTI2018-101784-B-I00.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

AgAu nanoclusters supported on zeolites: Structural dynamics during CO oxidation

  • López-Hernández, I.
  • Truttmann, V.
  • García, C.
  • Lopes, Christian W.
  • Rameshan, C.
  • Stöger-Pollach, M.
  • Barrabés, N.
  • Rupprechter, G.
  • Rey García, Fernando
  • Palomares Gimeno, Antonio Eduardo
The bimetallic nanocluster catalyst structure can change during pretreatment and reaction, thus in situ characterization techniques are required for a proper analysis of the active sites. In situ XAFS and DRIFTS were used to study the dynamic evolution of the metal active sites in bimetallic AgAu nanoclusters supported on ITQ2 zeolite during CO catalytic oxidation. The activity of the bimetallic nanocluster catalyst in this reaction was significantly higher than those of supported monometallic Ag and Au nanoclusters. These results were explained by the formation of AgAu alloyed nanoparticles, which favoured reactant adsorption and reaction. Furthermore, the initial activity depended on the catalyst pretreatment, obtaining better conversion, at lower temperatures, with the catalyst pretreated with hydrogen than with the catalyst pretreated with oxygen. This was also associated with an easier formation of a AgAu alloy under hydrogen pretreatment at 150 °C. However, the alloying process seemed to be completed after reaction in both cases, i.e. for the catalyst pretreated with oxygen and with hydrogen, obtaining the same catalytic performance with both catalysts upon reuse. The activity is constant in successive reaction runs, indicating high stability of the active species formed under reaction conditions. The results have shown that the combination of catalytic studies with in situ characterization techniques provides insight into the structural dynamics of the catalysts during activation and reaction., The authors thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 (MINECO/FEDER) and SEV-2016-0683 projects for the financial support. I. López Hernández is grateful to Generalitat Valenciana and European Social Fund for the pre doctoral grant ACIF2017. C.W.L. thanks PRH 50.1 – ANP/FINEP Human Resources Program (Brazil) for the Visiting Researcher Fellowship. We gratefully acknowledge ALBA synchrotron for allocating beamtime (proposal 2015091414) and the CLÆSS beamline staff for their help and technical support during our experiment. We acknowledge support by the Austrian Science Fund (FWF) via grants DK+Solids4Fun (W1243), Single Atom Catalysis (I 4434-N) and Elise Richter (V831-N).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Influence of the Support Nature and the Metal Precursor in the Activity of Pd-based Catalysts for the Bromate Reduction Reaction

  • Cerrillo, J.L.
  • Lopes, Christian W.
  • Rey García, Fernando
  • Palomares Gimeno, Antonio Eduardo
Palladium catalysts supported on different materials (alumina, activated carbon and mixed oxide derived from hydrotalcite) and prepared with different metal precursors (nitrate, chloride and acetate) have been characterized and tested for the bromate reduction reaction. The catalytic behavior depends on the support nature and on the metallic precursor used for the catalyst preparation. Pd catalyst supported on a mixed oxide has a low activity due to the high affinity of the reconstructed support for the Br formed, preventing the reactants to approximate the active Pd sites. Pd catalyst supported on activated carbon has a surface negative charge and a microporous structure, making difficult the interaction of the active sites with the reactants. The best results are obtained with the catalyst supported on alumina due to its physical-chemical properties, i. e. mesoporosity, positive surface charge and reversible adsorption of reactants and products. These characteristics make easy bromate and H adsorption on the active sites and subsequent reaction, thus resulting in a better activity. The Pd precursor salt also influences the catalytic activity as it has an effect on the Pd nanocrystal size. The best results are obtained with the metal precursor that produces homogeneous and large Pd metallic crystallites., Authors thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 (MINECO/FEDER) and SEV-2016-0683 projects for the financial support. We gratefully acknowledge ALBA synchrotron for allocating beamtime and CLÆSS beamline staff for their technical support during our experiment. C.W. Lopes (Science without Frontiers – Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship. J.L. Cerrillo is grateful to MINECO for the Severo Ochoa contract for PhD formation (SVP-2014-068600).The authors also wish to thank Elena Crespo and Adrián Pla for their collaboration in the experimental part of the paper., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Versatile phosphorus-structure-directing agent for direct preparation of novel metallosilicate zeolites with IFW-topology

  • Simancas, Raquel
  • Nishitoba, Toshiki
  • Park, Sungsik
  • Kondo, Junko N.
  • Rey García, Fernando
  • Gies, Hermann
  • Yokoi, Toshiyuki
To fabricate a novel metallosilicate zeolite with a tridirectional pore system of 8- and 10-ring channels, direct incorporation of B, Al and Ga into small and medium pore ITQ-52 zeolite with the IFW-type topology was carried out using a phosphorus-containing organic structure-directing agent (P-OSDA, 1,4-butanediylbis[tris(dimethylamino)]phosphonium hydroxide). The solids were characterized by XRD, FT-IR, B, Al, P and Ga MAS NMR spectroscopy before and after post-synthesis treatments and steaming. It was found that the P-species derived from OSDA were decomposed by heat treatments, forming extra-framework phosphates that remain in the cavities of the zeolite. The presence of P-species not only stabilized the Al or Ga located in framework positions which adopted a reversible octahedral configuration but also decreased the acid strength of the zeolites. The catalytic performance of the Al- and Ga-containing ITQ-52 zeolites in the MTO reaction was investigated. We have found that the presence of P in ITQ-52 enhanced the catalytic life time, and that the optimum P content for the samples with Si/Al = 120 and Si/Ga = 135 were found to be P/Al = 0.17 and P/Ga = 0.14, respectively, showing a propene selectivity higher than 35%., This work was supported by Tokyo Tech World Research Hub Initiative (WRHI) Program of Institute of Innovative Research, Tokyo Institute of Technology; MINECO of Spain through the Severo Ochoa (SEV-2016-0683) and RTI2018-101784-B-I00 projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stereoselective, ruthenium-photocatalyzed synthesis of 1,2-diaminotruxinic bis-amino acids from 4-arylidene-5(4 H)-oxazolones

  • Sierra, Sonia
  • Gómez, M. Victoria
  • Jiménez, Ana I.
  • Pop, Alexandra
  • Silvestru, Cristian
  • Marín, María Luisa
  • Boscá, Francisco
  • Sastre, Germán
  • Gómez-Bengoa, Enrique
  • Urriolabeitia, Esteban P.
The irradiation of (Z)-2-phenyl-4-aryliden-5(4H)-oxazolones 1 in deoxygenated CH2Cl2 at 25 °C with blue light (465 nm) in the presence of [Ru(bpy)3](BF4)2 (5% mole ratio) as a triplet photocatalyst promotes the [2+2] photocycloaddition of the C═C bonds of the 4-arylidene moiety, thus allowing the completely regio- and stereoselective formation of cyclobutane-bis(oxazolone)s 2 as single stereoisomers. Cyclobutanes 2 have been unambiguously characterized as the μ-isomers and contain two E-oxazolones coupled in an anti-head-to-head form. The use of continuous-flow techniques in microreactors allows the synthesis of cyclobutanes 2 in only 60 min, compared with the 24–48 h required in batch mode. Ring opening of the oxazolone heterocycle in 2 with a base affords the corresponding 1,2-diaminotruxinic bis-amino esters 3, which are also obtained selectively as μ-isomers. The ruthenium complex behaves as a triplet photocatalyst, generating the reactive excited state of the oxazolone via an energy-transfer process. This reactive excited state has been characterized as a triplet diradical 3(E/Z)-1* by laser flash photolysis (transient absorption spectroscopy). This technique also shows that this excited state is the same when starting from either (Z)- or (E)-oxazolones. Density functional theory calculations show that the first step of the [2+2] cycloaddition between 3(E/Z)-1* and (Z)-1 is formation of the C(H)–C(H) bond and that (Z) to (E) isomerization takes place at the 1,4-diradical thus formed., The authors thank the Spanish Government for funding: Project PID2020-119636GB-I00, funded by MCIN/AEI/10.13039/501100011033; Projects PID2019-106394GB-I00/AEI/10.13039/501100011033, PID2019-110441RB-C33/AEI/10.13039/501100011033, and PID2019-110008GB-I00/AEI/10.13039/501100011033, funded by MCIN/AEI/10.13039/501100011033; Projects RTI2018-101784-B-I00, RTI2018-101033-B-I00, and CTQ2017-84825-R, funded by MCIN/AEI/10.13039/501100011033 and FEDER Una manera de hacer Europa. E.P.U., A.I.J., and S.S. thank Gobierno de Aragón-FSE (Spain, research group Aminoácidos y Péptidos E19_20R) for funding. G.S. thanks CTI-CSIC and ASIC-UPV for the use of computational facilities. E.G.-B. thanks SGIker (UPV/EHU) for providing human and computational resources. A.P. is grateful for the financial support of the Romanian Ministry of Education and Research through Grant PN-III-P1-1.1-MC-2018-2580. S.S. thanks Gobierno de Aragón-FSE for a Ph.D. fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Water adsorption and hydrothermal stability of CHA zeolites with different Si/Al ratios and compensating cations

  • Moura, P.A.S.
  • Rodríguez-Aguado, E.
  • Maia, D.A.S.
  • Melo, D.C.
  • Singh, R.
  • Valencia, Susana
  • Webley, P.A.
  • Rey García, Fernando
  • Bastos-Neto, M.
  • Rodríguez-Castellón, E.
  • Azevedo, D.C.S.
Zeolites are well known crystalline aluminosilicates, which may be used in processes that take advantage of their molecular sieving effect, such as natural gas drying. They are often used in cyclic processes that swing pressure and/or temperature to perform adsorption and desorption steps. It is recognized that thermal stress may decrease process performance upon prolonged use. In this work, chabazite (CHA) zeolite with two different Si/Al ratios and compensating cations was investigated by thermally aging the samples using a laboratory-scale protocol. A Premature Aging Protocol – PAP was proposed that took into account the conditions which the adsorbent is exposed to in Temperature Swing Adsorption (TSA) process for natural gas drying. The sample was previously saturated with water and n-heptane vapors (as a reference hydrocarbon) followed by pressurization (30 bar) and heating (573 K) with a mixture of CO2 and CH4 (1:4, v/v). The Si/Al ratios of the CHA samples under study were 2 and 5 and the compensating cations were Na and K. Aged materials presented a lower CO2 and water vapor adsorption capacity with an increasing content of carbon in the bulk composition. The sample with higher Si/Al ratio (≈5) had a larger pore volume but adsorbed less water. Despite having the highest carbon content after aging and modest acidity, it was the most thermally stable sample, together with the sample containing potassium. Even with a lower Si/Al ratio (≈2), the presence of potassium provided the sample a protective effect against aging., The authors acknowledge financial support from Petrobras (Brazil) project 2018/00130-5 and CAPES (Brazil), particularly in the frame of project CAPES/Print 88887.311867/2018-00. E. Rodríguez-Aguado and E. Rodríguez-Castellón are thankful to project RTI2018-099668-BC22 of Ministerio de Ciencia, Innovación y Universidades (Spain) and project UMA18-FEDERJA-126 of Junta de Andalucía (Spain) and FEDER (E.U.) funds. The authors S. Valencia and F. Rey are thankful to the MCIU (Spain), AEI (Spain) and FEDER (E.U.) for funding through the projects RTI2018-101784-B-I00 and SEV-2016–0683., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gold nanoclusters supported on different materials as catalysts for the selective alkyne semihydrogenation

  • López-Hernández, I.
  • Truttmann, V.
  • Barrabés, N.
  • Rupprechter, G.
  • Rey García, Fernando
  • Mengual, J.
  • Palomares Gimeno, Antonio Eduardo
Catalysts based on gold nanoclusters supported by different materials have been used for the selective semihydrogenation of phenylacetylene to styrene. The most active species were formed by catalyst thermal activation in a reductive atmosphere. It is shown that the activity and selectivity of these catalysts is mainly controlled by the interaction of the gold nanoclusters with the support, as demonstrated by using materials with high surface area and different acidity/basicity, i.e. MgO, AlO and Mg/Al hydrotalcite. There is an important influence of the acid/base properties of the support on the selectivity. Higher activity is obtained for gold supported on basic materials (MgO and hydrotalcite) and the best results are obtained with the Au catalyst supported on the MgAl hydrotalcite exhibiting high activity and the best selectivity to the alkene. This was explained by the intermediate basicity of the support that favors the heterolytic cleavage of H while avoiding the overreduction of the alkynes to alkanes., The authors thank the Spanish Ministry of Economy and Competitiveness through RTI2018-101784-B-I00 (MINECO/FEDER), PROMETEO/2021/077 and SEV-2016-0683 projects for the financial support. I. López Hernández is grateful to Generalitat Valenciana and European Social Fund for the pre doctoral grant ACIF2017. We acknowledge support by the Austrian Science Fund (FWF) via Single Atom Catalysis (I 4434-N) and Elise Richter (V831-N)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zeolite Phase Selectivity Using the Same Organic Structure-Directing Agent in Fluoride and Hydroxide Media

  • León, Santiago
  • Sastre, Germán
Force field-based calculations of all-silica zeolites show the role of fluoride as a structure-directing agent (SDA). Calculations of fully packed organic and fluoride SDAs were possible with an updated version of zeoTsda software, based on Monte Carlo+Lattice Energy Minimization. Comparison between fluoride-containing and fluoride-free calculations using the same organic SDA allowed us to predict which zeolite phase is obtained in fluoride and hydroxide media and also, through a new energy decomposition scheme, identify energetic contributions driving the synthesis outcome., We thank MICINN of Spain for funding through projects RTI2018-101784-B-I00, RTI2018-101033-B-I00, and SEV-2016-0683. S.L. thanks MICINN for predoctoral grant BES-2017-081245 corresponding to project SEV-2016-0683-17-2. Prof. A. Corma is acknowledged for collaboration from the SEV-2016-0683 project. We thank ASIC-UPV for the use of computational facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Water adsorption and hydrothermal stability of CHA zeolites with different Si/Al ratios and compensating cations

  • Moura, P.A.S.
  • Rodríguez-Aguado, E.
  • Maia, D.A.S.
  • Melo, D.C.
  • Singh, R.
  • Valencia, Susana
  • Webley, P.A.
  • Rey García, Fernando
  • Bastos-Neto, M.
  • Rodríguez-Castellón, E.
  • Azevedo, D.C.S.
Zeolites are well known crystalline aluminosilicates, which may be used in processes that take advantage of their molecular sieving effect, such as natural gas drying. They are often used in cyclic processes that swing pressure and/or temperature to perform adsorption and desorption steps. It is recognized that thermal stress may decrease process performance upon prolonged use. In this work, chabazite (CHA) zeolite with two different Si/Al ratios and compensating cations was investigated by thermally aging the samples using a laboratory-scale protocol. A Premature Aging Protocol – PAP was proposed that took into account the conditions which the adsorbent is exposed to in Temperature Swing Adsorption (TSA) process for natural gas drying. The sample was previously saturated with water and n-heptane vapors (as a reference hydrocarbon) followed by pressurization (30 bar) and heating (573 K) with a mixture of CO and CH (1:4, v/v). The Si/Al ratios of the CHA samples under study were 2 and 5 and the compensating cations were Na and K. Aged materials presented a lower CO and water vapor adsorption capacity with an increasing content of carbon in the bulk composition. The sample with higher Si/Al ratio (≈5) had a larger pore volume but adsorbed less water. Despite having the highest carbon content after aging and modest acidity, it was the most thermally stable sample, together with the sample containing potassium. Even with a lower Si/Al ratio (≈2), the presence of potassium provided the sample a protective effect against aging., The authors acknowledge financial support from Petrobras (Brazil) project 2018/00130-5 and CAPES (Brazil), particularly in the frame of project CAPES/Print 88887.311867/2018-00. E. Rodríguez-Aguado and E. Rodríguez-Castellón are thankful to project RTI2018-099668-B-C22 of Ministerio de Ciencia, Innovación y Universidades (Spain) and project UMA18-FEDERJA-126 of Junta de Andalucía (Spain) and FEDER (E.U.) funds. The authors S. Valencia and F. Rey are thankful to the MCIU (Spain), AEI (Spain) and FEDER (E.U.) for funding through the projects RTI2018-101784-B-I00 and SEV-2016–0683., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zeolites in Adsorption Processes: State of the Art and Future Prospects

  • Perez-Botella, Eduardo
  • Valencia, Susana
  • Rey García, Fernando
Zeolites have been widely used as catalysts, ion exchangers, and adsorbents since their industrial breakthrough in the 1950s and continue to be state-of the-art adsorbents in many separation processes. Furthermore, their properties make them materials of choice for developing and emerging separation applications. The aim of this review is to put into context the relevance of zeolites and their use and prospects in adsorption technology. It has been divided into three different sections, i.e., zeolites, adsorption on nanoporous materials, and chemical separations by zeolites. In the first section, zeolites are explained in terms of their structure, composition, preparation, and properties, and a brief review of their applications is given. In the second section, the fundamentals of adsorption science are presented, with special attention to its industrial application and our case of interest, which is adsorption on zeolites. Finally, the state-of-the-art relevant separations related to chemical and energy production, in which zeolites have a practical or potential applicability, are presented. The replacement of some of the current separation methods by optimized adsorption processes using zeolites could mean an improvement in terms of sustainability and energy savings. Different separation mechanisms and the underlying adsorption properties that make zeolites interesting for these applications are discussed., The authors want to thank the Spanish Ministry of Science and Innovation and the Spanish Agency of Research for their funding via Project RTI2018-101784-B-I00. The Generalitat Valenciana, Conselleria d’Innovació, Universitats Ciència y Societat Digital is acknowledged for their funding via project Prometeo/2021/077. E.P.-B. acknowledges the Spanish Ministry of Education and Professional Training for the grant FPU15/01602.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Separation of biobutanol from synthetic fermentation mixtures using unidirectional small pore pure silica zeolites

  • Perez-Botella, Eduardo
  • Claessens, Benjamin
  • Valencia, Susana
  • Rey García, Fernando
  • Denayer, Joeri F. M.
The adsorptive vapour phase separation of 1-butanol from a synthetic ABE (acetone, 1-butanol, ethanol) mixture has been studied for the first time on a set of unidirectional small pore pure silica zeolites with ITW, MTF, RTH and STT structures with different pore size and topology. With this systematic approach, we provide insight into the structural and surface properties that can improve the vapour phase recovery of biobutanol. The influence of operation parameters, such as the temperature (40–80 °C), the total flow, and presence/absence of humidity and CO have been studied. For this application, adsorbents need to possess pore openings with one of their dimensions larger than 4.1 Å and cavities with diameters above 7 Å. Si-STT zeolite presents a remarkable selectivity towards 1-butanol, which is not affected by the presence of water or CO in the mixture or by an increase in the temperature. Si-STT results an excellent and robust adsorbent for this separation at conditions close to those of the headspace of the ABE fermenter, achieving purities of 90–93% at recoveries between 90 and 96%., The authors want to thank the Spanish Ministry of Science and Innovation and the Spanish Agency of Research for their funding via Project RTI2018-101784-B-I00. The Generalitat Valenciana, Conselleria d’Innovació, Universitats, Ciència y Societat Digital is acknowledged for their funding via project Prometeo/2021/077. EP-B acknowledges the Spanish Ministry of Education and Professional Training for the grant FPU15/01602 and the additional funding for the stay EST18/00213., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic oxidation of volatile organic compounds with Mn-zeolites

  • Toloza-Blanco, L.
  • Gora-Marek, K.
  • Tarach, K.A.
  • Sobalska, J.
  • Martínez Triguero, Joaquín
  • Plá-Hernández, A.
  • Palomares Gimeno, Antonio Eduardo
Mn-catalysts supported on zeolites are active materials for oxidising volatile organic compounds, but the catalysts' activity and selectivity depend on the support's characteristics. In this work, we study the performance of different Mn catalysts supported on zeolites with different Si/Al ratios and topology in the ethanol oxidation reaction. The results show a correlation between the mechanism of the reaction and the presence or absence of acid sites on the zeolite surface, which is based on its aluminium content. It is observed that the presence of Brønsted acid sites catalyses ethanol dehydration to ethylene that is oxidised to CO at higher temperatures. Without protonic acid sites, ethanol is primarily oxidised to acetaldehyde and subsequently oxidised to CO, achieving a complete oxidation at lower temperatures. The acidity also influences the nature of the metallic active sites, forming Mn-oxo species with higher oxidation state in the catalyst with lower aluminium content. These species are more active than those formed in the catalyst enriched with Brønsted acid sites. Thus, zeolites with higher Si/Al ratios are more adequate for supporting Mn catalysts in the ethanol oxidation reaction. The results show that low acidity is a decisive factor in designing active catalysts for this reaction, while zeolite topology or catalyst surface area are of secondary importance., The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation (CEX2021–001230-S grant funded by MCIN/AEI/10.13039/501100011033; TED2021–131715B-I00 grant funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” by the European Union NextGeneration EU/PRTR and PID2021–126235OB-C31). Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. L. Toloza thanks Fundación Carolina for the pre-doctoral grant, call 2019-2020 Universidad Central de Colombia and Universitat Politècnica de València agreement. A. Plá-Hernández thanks Spanish Ministry of Science and Innovation for the pre-doctoral grant PRE2019–088100, associated with the project RTI2018–101784-B-I00. FT-IR and UV–vis in situ and operando studies were financed by Grant No. 2021/41/B/ST4/00048 from the National Science Centre, Poland.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pt-zeolites as active catalysts for the removal of chlorate in water by hydrogenation reactions

  • Plá-Hernández, A.
  • Rey García, Fernando
  • Palomares Gimeno, Antonio Eduardo
Catalytic hydrogenation is used to remove chlorate ions from water streams by using platinum catalysts supported on zeolites with different topologies (FAU, BEA, MWW, MFI and MOR), Si/Al ratio and compensating cation. It is observed that there is an important influence of the zeolite characteristics on the catalytic activity. The best results have been obtained with the catalyst supported on zeolites with a high number of acid centres, this is with a low Si/Al ratio and with protons, as counter-cation species compensating aluminium charge. The acid sites favour the interaction of the catalyst with the reactants and influence the neighbouring Pt species improving the redox properties of the catalyst. It is shown that with an adequate number of acid sites it is possible to decrease the metal content, keeping the same catalytic activity, by increasing the metal dispersion. The highest activity is obtained with an acidic FAU zeolite, with low Si/Al ratio and 1 wt% of Pt added by ion exchange. This catalyst is able to simultaneously reduce chlorate and chlorite ions and chlorate and bromate ions indicating that it is a multifunctional catalyst that can be utilized for removing different pollutants in water., The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033, and TED2021-131715B-I00 grant funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” by the European Union NextGenerationEU/PRTR) . Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. A. Plá-Hernández thanks Spanish Ministry of Science and Innovation for the pre-doctoral grant PRE2019-088100, associated with the project RTI2018-101784-B-I00.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Stereoselective, Ruthenium-Photocatalyzed Synthesis of 1, 2-Diaminotruxinic Bis-amino Acids from 4-Arylidene-5(4 H)-oxazolones

  • Sierra, Sonia
  • Gómez, M. Victoria
  • Jiménez, Ana I.
  • Pop, Alexandra
  • Silvestru, Christian
  • Marin, María Luisa
  • Boscá, Francisco
  • Sastre, Germán
  • Gómez-Bengoa, Enrique
  • Urrolabeitia, Esteban P.
The irradiation of (Z)-2-phenyl-4-aryliden-5(4H)-oxazolones 1 in deoxygenated CH2Cl2at 25 °C with blue light (465 nm) in the presence of Ru(bpy)3](BF4)2(5% mole ratio) as a triplet photocatalyst promotes the 2+2] photocycloaddition of the C=C bonds of the 4-arylidene moiety, thus allowing the completely regio- and stereoselective formation of cyclobutane-bis(oxazolone)s 2 as single stereoisomers. Cyclobutanes 2 have been unambiguously characterized as the µ-isomers and contain two E-oxazolones coupled in an anti-head-to-head form. The use of continuous-flow techniques in microreactors allows the synthesis of cyclobutanes 2 in only 60 min, compared with the 24-48 h required in batch mode. Ring opening of the oxazolone heterocycle in 2 with a base affords the corresponding 1, 2-diaminotruxinic bis-amino esters 3, which are also obtained selectively as µ-isomers. The ruthenium complex behaves as a triplet photocatalyst, generating the reactive excited state of the oxazolone via an energy-transfer process. This reactive excited state has been characterized as a triplet diradical 3(E/Z)-1* by laser flash photolysis (transient absorption spectroscopy). This technique also shows that this excited state is the same when starting from either (Z)- or (E)-oxazolones. Density functional theory calculations show that the first step of the 2+2] cycloaddition between 3(E/Z)-1* and (Z)-1 is formation of the C(H)-C(H) bond and that (Z) to (E) isomerization takes place at the 1, 4-diradical thus formed. © 2022 American Chemical Society. All rights reserved.