Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 107
Encontrada(s) 2 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Recommending Learning Videos for MOOCs and Flipped Classrooms

  • Jordán, Jaume|||0000-0003-0400-9136
  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Turró Ribalta, Carlos|||0000-0002-3840-9405
  • Botti V.|||0000-0002-6507-2756
[EN] New teaching approaches are emerging in higher education, such as flipped classrooms. In addition, academic institutions are offering new types of training like Massive Online Open Courses. Both of these new ways of education require high-quality learning objects for their success, with learning videos being the most common to provide theoretical concepts. This paper describes a hybrid learning recommender system based on content-based techniques, which is able to recommend useful videos to learners and teachers from a learning video repository. This hybrid technique has been successfully applied to a real scenario such as the central video repository of the Universitat Politècnica de València., This work was partially supported by MINECO/FEDER RTI2018-095390-B-C31 and TIN2017-89156-R projects of the Spanish government, and PROMETEO/2018/002 project of Generalitat Valenciana. J. Jordán and V. Botti are funded by UPV PAID-06-18 project. J. Jordán is also funded by grant APOSTD/2018/010 of Generalitat Valenciana - Fondo Social Europeo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Methanol and OMEx as fuel candidates to fulfill the potential EURO VII emissions regulation under dual-mode dual-fuel combustion

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Villalta-Lara, David
  • Guzmán-Mendoza, María Gabriela
[EN] Recent investigations show that there are different combustion strategies that promise to achieve higher efficiencies in internal combustion engines. Advanced combustion modes such as reactivity controlled compression ignition (RCCI) and dual-mode dual-fuel (DMDF) have proven to be able to achieve low NOx and soot engine-out emissions while being able to operate over the complete engine map. On another front, intensive research has been done in the fuels field. Oxygenated fuels, like oxymethylene dimethyl ethers (OMEx) and methanol, are of special interest because of their potential to reduce the soot emissions, while allowing to adjust parameters, such as EGR, to higher values to also reduce NOx emissions and avoid other problems like excessive in-cylinder peaks of pressure. In this research, the effects of diesel-methanol and OMEx-gasoline fuels were studied on a dual-mode dual-fuel (DFDM) multi-cylinder engine at 1800 rpm for various loads (25, 50, 80 and 100%). To do so, a dedicated calibration to optimize the brake thermal efficiency while trying to maintain NOx and soot emissions under EURO VI limitations was applied. Then, the combustion characteristics, performance and emissions results are compared to a base diesel-gasoline case. Boundary conditions (intake pressure, temperature and air mass) for each fuel combination where similar, with the exception of the premixed energy ratio, which was on average 20% lower for diesel-methanol. Each fuel combination was, weighted against each other by means of an merit function, where the fuel combination with the lowest value has the closest approximation to ideal BSFCeq, BSNOx, BSSoot, BSCO and BSHC targets. Results show that diesel-methanol presents no significant differences with respect to diesel-gasoline in terms of equivalent BSFCeq and NOx, while the substitution of diesel by OMEx in the dual-mode dual-fuel combustion has the potential of, although penalizing HC and CO emissions, not only achieving the EURO VI NOx (0.4 g/kWh) limits but also the future potential EURO VII (0.2 g/kWh) as well because of a negligible soot production that allows using EGR levels of up to 50%., The authors thanks ARAMCO Overseas Company and VOLVO Group Trucks Technology for supporting this research. The authors acknowledge FEDER and Spanish Ministerio de Economia y Competitividad for partially supporting this research through TRANCO project (TRA201787694-R). The authors also acknowledge the Universitat Politecnica de Val`encia for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigacion (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Update on Crop ABA Receptors

  • Ruiz-Partida, Rafael
  • Lozano-Juste, Jorge|||0000-0001-7034-566X
  • Rosario, Sttefany M.
[EN] The hormone abscisic acid (ABA) orchestrates the plant stress response and regulates sophisticated metabolic and physiological mechanisms essential for survival in a changing environment. Plant ABA receptors were described more than 10 years ago, and a considerable amount of information is available for the model plant Arabidopsis thaliana. Unfortunately, this knowledge is still very limited in crops that hold the key to feeding a growing population. In this review, we summarize genomic, genetic and structural data obtained in crop ABA receptors. We also provide an update on ABA perception in major food crops, highlighting specific and common features of crop ABA receptors., This research was funded by the grants SP20180340 (PAID-06-18), from Universitat Politecnica de Valencia, and GV/2020/159, from Generalitat Valenciana, to J.L.-J. and FONDOCYT2018 2C1-182 grant from FONDOCYT to S.M.R. and J.L.-J.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ultrastable Magnetic Nanoparticles Encapsulated in Carbon for Magnetically Induced Catalysis

  • Martínez-Prieto, Luis Miguel
  • Marbaix, Julien
  • Asensio, Juan M.
  • Fazzini, Pier-Francesco
  • Soulantica, Katerina
  • Chaudret, Bruno
  • Cerezo-Navarrete, Christian
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Magnetically induced catalysis using magnetic nanoparticles (MagNPs) as heating agents is a new efficient method to perform reactions at high temperatures. However, the main limitation is the lack of stability of the catalysts operating in such harsh conditions. Normally, above 500 degrees C, significant sintering of MagNPs takes place. Here we present encapsulated magnetic FeCo and Co NPs in carbon (Co@C and FeCo@C) as an ultrastable heating material suitable for high-temperature magnetic catalysis. Indeed, FeCo@C or a mixture of FeCo@C:Co@C (2:1) decorated with Ni or Pt-Sn showed good stability in terms of temperature and catalytic performances. In addition, consistent conversions and selectivities regarding conventional heating were observed for CO2 methanation (Sabatier reaction), propane dehydrogenation (PDH), and propane dry reforming (PDR). Thus, the encapsulation of MagNPs in carbon constitutes a major advance in the development of stable catalysts for high-temperature magnetically induced catalysis., The authors thank the Instituto de Tecnologia Quimica (ITQ), Consejo Superior de Investigaciones Cientificas (CSIC), Universitat Politecnica de València (UPV) for the facilities and Severo Ochoa programe (SEV-2016-0683), "Juan de la Cierva" by MINECO (IJCI-2016-27966), and Primero Proyectos de Investigación PAID-06-18 (SP20180088) for financial support. The authors acknowledge ERC Advanced Grants (MONACAT-2015-694159 and SynCatMatch-2014671093). We also thank the Electron Microscopy Service of the UPV for TEM facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Uso de bombas osmóticas como método alternativo a la inducción de la maduración en hembras de anguila europea

  • Silva González, Susana
[ES] La anguila europea (Anguilla anguilla) es una especie con un elevado interés acuícola a nivel mundial y con una alta producción en el contexto de la acuicultura europea. Sin embargo, la piscicultura de anguilas se presenta como una actividad no sostenible en el tiempo, debido fundamentalmente a que las empresas dependen del abastecimiento de juveniles del medio natural. Además, actualmente se encuentra catalogada como especie en peligro crítico de extinción (UICN) debido a la reducción drástica de su población en las últimas décadas. Por lo tanto, la reproducción en cautividad de esta especie se presenta como una pieza clave para su conservación, lo que ayudará a reducir la presión sobre las poblaciones naturales, facilitará el abasteciendo a las anguilifactorías, y permitirá repoblaciones en zonas en las que históricamente se localizaba la anguila. El objetivo del presente estudio fue evaluar la aplicación de métodos alternativos de inducción de la maduración sexual (sistemas de liberación controlada, SLC) en hembras de anguila europea. Con la finalidad de desarrollar protocolos capaces de inducir la ovulación en anguila europea la evaluación se realizó tanto en términos biológicos como ecónomicos. Los resultados mostraron que la implantación de bombas osmóticas indujo la maduración en el del 80% de las hembras, reduciendo la duración del tratamiento hormonal en un 50% de ellas, que alcanzaron la madurez en las primeras 4-10 semanas de tratamiento. Con respecto a la evolución del peso de las hembras durante la maduración se observó un incremento en la semana previa del 16±6% en el grupo OP-2ML4 y del 20±14% en el grupo control. En cuanto al índice gonadosomático (IGS), las hembras implantadas con bombas osmóticas presentaron valores similares al grupo control, 49.5±2.8% y 51.2±9.8%, respectivamente. Asimismo, se obtuvo un total de 6 puestas alcanzando el estado de embrión formado con la cabeza, ojos y somitas distinguible como máximo desarrollo embrionario. Finalmente, este estudio demuestra que el uso de bombas osmóticas cargadas con extracto de hipófisis de carpa (CPE) se presenta como un método eficaz para inducir la maduración sexual en hembras de anguila europea, generando maduraciones tempranas (semanas 4-10) en el 50% de hembras con una bomba implantada. No obstante, el análisis económico demuestra que las inyecciones semanales de CPE se presentan como un método más rentable para inducir la maduración sexual en hembras de anguila europea., [EN] The European eel (Anguilla anguilla) is a species with high aquaculture interest worldwide and with a high production in the context of European aquaculture. However, eel fish farming is presented as an unsustainable activity over time, mainly due to the fact that companies depend on the supply of juveniles from the natural environment. In addition, it is currently listed as a critically endangered species (IUCN) due to the drastic reduction in its population in recent decades. Therefore, the captive reproduction of this species is presented as a key element for its conservation, which will help reduce the pressure on natural populations, facilitate the supply of eel farms, and allow repopulation in areas where historically the eel was found. The objective of the present study was to evaluate the application of alternative methods of induction of sexual maturation (controlled release systems, CRS) in female European eels. In order to develop protocols capable of inducing ovulation in European eel, the evaluation was carried out both in biological and economic terms. The results show that the implantation of osmotic pumps induced maturation in 80% of the females, reducing the duration of hormonal treatment in 50% of them, which reached maturation in the first 4-10 weeks of treatment. Regarding the evolution of the weight of the females during maturation, an increase in the previous week of 16±6% in the OP-2ML4 group and 20±14% in the control group. Regarding the gonadosomatic index (GSI), the females implanted with osmotic pumps presented similar values to the control group, 49.5±2.8% and 51.2 ± 9.8%, respectively. Likewise, a total of 6 clutches were obtained, reaching the embryo state formed with distinguishable head, eyes and somites as maximum embryonic development. Finally, this study shows that the use of osmotic pumps loaded with carp pituitary extract (CPE) is an effective method to induce sexual maturation in female European eels, generating early maturations (weeks 4-10) in 50% of females with an implanted pump. However, economic analysis shows that weekly injections of CPE are presented as a more cost-effective method to induce sexual maturation in female European eel.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved Tafel-Based Potentiostatic Approach for Corrosion Rate Monitoring of Reinforcing Steel

  • Ramón, José Enrique
  • Martínez, Isabel
  • Soto Camino, Juan
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
[EN] Potential step voltammetry (PSV) was introduced in earlier works as an advantageous alternative to traditional methods for measuring corrosion rate in reinforced concrete. The present study aims to improve PSV to maximize its applicability in corrosion rate monitoring, that is, beyond the narrowly-defined steel¿concrete systems in which was initially validated. It was therefore identified necessary to address the most suitable PSV pulse amplitudes to accurately obtain the Tafel lines and, therefore, corrosion rate in steel-mortar systems with well-differentiated ohmic drop. PSV findings were compared to reference methods, i.e. Tafel intersection and linear polarization resistance. As a novelty, we propose a procedure to improve the reliability of the PSV-determined Tafel lines, which is based on three protocols (P1, P2 and P3). P1 consists of a specific pulse sequence to accurately characterize the morphology of the polarization curve without disturbing the system. P2 consists of two short pulses for determining the ohmic drop compensation factor. Finally, P3 consists of a simple calculation procedure to accurately adjust the PSV pulse amplitudes (V) to the steel¿concrete system assessed, thus obviating the need for preset values and, therefore, ensuring accurate corrosion rate results. The procedure proposed is intended to improve PSV with a view to its consolidation as a reliable tool for the unsupervised monitoring of real structures., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by the pre-doctoral scholarship granted to Jose Enrique Ramon Zamora by the Spanish Ministry of Science and Innovation (Grant Number FPU13/00911). We would also like to acknowledge financial support from the Spanish Ministry of Science and Innovation through the national programs of oriented research, development and innovation to societal challenges (Project Numbers BIA2016-78460-C33-R, PID2020-119744RB-C21 and PID2020-119744RB-C22). To the Universitat Politecnica de Valencia for the financial support in the project "Ayudas a Primeros Proyectos de Investigacion (PAID-0618)"-SP20180245.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ranolazine as an Alternative Therapy to Flecainide for SCN5A V411M Long QT Syndrome Type 3 Patients

  • Cano, Jordi
  • Zorio, Esther
  • Mazzanti, Andrea
  • Arnau, Miguel Ángel
  • Priori, Silvia G.
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
  • Romero Pérez, Lucia|||0000-0003-4605-8630
[EN] The prolongation of the QT interval represents the main feature of the long QT syndrome (LQTS), a life-threatening genetic disease. The heterozygous SCN5A V411M mutation of the human sodium channel leads to a LQTS type 3 with severe proarrhythmic effects due to an increase in the late component of the sodium current (INaL). The two sodium blockers flecainide and ranolazine are equally recommended by the current 2015 ESC guidelines to treat patients with LQTS type 3 and persistently prolonged QT intervals. However, awareness of pro-arrhythmic effects of flecainide in LQTS type 3 patients arose upon the study of the SCN5A E1784K mutation. Regarding SCN5A V411M individuals, flecainide showed good results albeit in a reduced number of patients and no evidence supporting the use of ranolazine has ever been released. Therefore, we ought to compare the effect of ranolazine and flecainide in a SCN5A V411M model using an in-silico modeling and simulation approach. We collected clinical data of four patients. Then, we fitted four Markovian models of the human sodium current (INa) to experimental and clinical data. Two of them correspond to the wild type and the heterozygous SCN5A V411M scenarios, and the other two mimic the effects of flecainide and ranolazine on INa. Next, we inserted them into three isolated cell action potential (AP) models for endocardial, midmyocardial and epicardial cells and in a one-dimensional tissue model. The SCN5A V411M mutation produced a 15.9% APD90 prolongation in the isolated endocardial cell model, which corresponded to a 14.3% of the QT interval prolongation in a one-dimensional strand model, in keeping with clinical observations. Although with different underlying mechanisms, flecainide and ranolazine partially countered this prolongation at the isolated endocardial model by reducing the APD90 by 8.7 and 4.3%, and the QT interval by 7.2 and 3.2%, respectively. While flecainide specifically targeted the mutation-induced increase in peak INaL, ranolazine reduced it during the entire AP. Our simulations also suggest that ranolazine could prevent early afterdepolarizations triggered by the SCN5A V411M mutation during bradycardia, as flecainide. We conclude that ranolazine could be used to treat SCN5A V411M patients, specifically when flecainide is contraindicated., This work was partially supported by Fondo Europeo de Desarrollo Regional (FEDER, "Union Europea, Una forma de hacer Europa") with the Ministerio de Economia y Competitividad (DPI2015-69125-R), Direccion General de Politica Cientifica de la Generalitat Valenciana (PROMETEO/2020/043) and Instituto de Salud Carlos III (La Fe Biobank PT17/0015/0043), as well as by Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia with Ayuda a Primeros Proyectos de Investigacion (PAID-06-18), and by Memorial Nacho Barbera.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modal decomposition of the unsteady non-reactive flow field in a swirl-stabilized combustor operated by a Lean Premixed injection system

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Belmar-Gil, M.
[EN] This work is focused on the numerical study of low-order coherent structures of a high-swirled laboratory-scaled combustor operated by a Lean Premixed (LP) injection system in non-reacting conditions through different flow modal decomposition techniques. This will provide valuable insight into the time-spatial modal structure detecting coherent spatial patterns. Experiments suggest the appearance of a self-excited hydrodynamic instability characterized by a single dominant frequency. On the one hand, the dominant pulsating energy components associated with the Precessing Vortex Core (PVC) are identified through the application of a Proper Orthogonal Decomposition (POD) to the instantaneous velocity field. On the other hand, Dynamic Mode Decomposition (DMD) is proven to effectively highlight the relation between the frequency of the most dominant unsteady vortex structures and their spatial distribution within the combustor. Since DMD analysis generates a global frequency spectrum in which each mode corresponds to a specific discrete frequency, its application has been demonstrated to be more efficient than POD when dealing with temporally coherent problems. In this way, the DMD technique has proved to be a robust and systematic method that can give accurate and consistent interpretations of the periodic physics underlying hydrodynamic instabilities in the combustor studied in the present investigation., This work was partly sponsored by the program "Ayuda a Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), Spain". We thankfully acknowledge the computer resources at Altamira Supercomputer and the technical support provided by Universidad de Cantabria (RES FI-2018-3-0033 and FI-2019-1-0009) in the frame of the Spanish Supercomputing Network. On the other hand, the support given to Mr. Mario Belmar by Universitat Politecnica de Valencia through the "FPI-Subprograma 2" grant within the "Programa de Apoyo para la Investigacion y Desarrollo (PAID-01-18)" is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Documenting Paintings Using Gigapixel SfM Photogrammetry

  • Cabezos Bernal, Pedro Manuel|||0000-0001-5630-6429
  • Gil Piqueras, Teresa|||0000-0001-8739-3705
  • Rodríguez Navarro, Pablo
[EN] Capturing paintings with gigapixel resolution (resolution around 1000 megapixels or greater) is an innovative technique that is starting to be used by some important international museums for documenting, analysing, and disseminating their masterpieces. This line of research is extremely interesting, not only for art curators and scholars, but also for the general public. The results can be disseminated through online virtual tours, offering a detailed interactive visualization. These virtual tours allow the viewer to delve into the artwork, in such a way, that it is possible to zoom in and observe those details, which would be negligible to the naked eye in a real visit. Therefore, this kind of virtual visualization using gigapixel images becomes an essential tool to enhance this cultural heritage and to make it accessible to everyone. This article will describe an affordable methodology, based on SfM photogrammetry techniques, with which it will be possible to achieve a very high level of detail and chromatic fidelity, when documenting and disseminating pictorial artworks. As a practical example, there will be shown a case study of the altarpiece, from the Museo de Bellas Artes de Valencia (Spain), entitled Virgen de las fiebres, painted around 1500 by Bernardino di Benedetto di Biagio, nicknamed `Il Pinturicchio' (Perugia, ca. 1454 ¿ Siena, 1513)., This research was carried out within the Research Project entitled Captura fotográfica de resolución gigapíxel para la documentación y divulgación del patrimonio pictórico (01/01/19- 01/01/21), reference SP20180066. Project funded with the help of Primeros Proyectos de Investigación (PAID-06-18), Vicerrectorado de Investigación,Innovación y Transferencia de la Universitat Politècnica de València (UPV), València, Spain
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

When Does the IC50 Accurately Assess the Blocking Potency of a Drug?

  • Gomis-Tena Dolz, Julio|||0000-0002-1309-2368
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
  • Romero Pérez, Lucia|||0000-0003-4605-8630
  • Brown, Brandon M.
  • Cano, Jordi
  • Yang, Pei-Chi
  • Clancy, Colleen E.
[EN] Preclinical assessment of drug-induced proarrhythmicity is typically evaluated by the potency of the drug to block the potassium human ether-a-go-go-related gene (hERG) channels, which is currently quantified by the IC50. However, channel block depends on the experimental conditions. Our aim is to improve the evaluation of the blocking potency of drugs by designing experimental stimulation protocols to measure the IC50 that will help to decide whether the IC50 is representative enough. We used the state-of-the-art mathematical models of the cardiac electrophysiological activity to design three stimulation protocols that enhance the differences in the probabilities to occupy a certain conformational state of the channel and, therefore, the potential differences in the blocking effects of a compound. We simulated an extensive set of 144 in silico IKr blockers with different kinetics and affinities to conformational states of the channel and we also experimentally validated our key predictions. Our results show that the IC50 protocol dependency relied on the tested compounds. Some of them showed no differences or small differences on the IC50 value, which suggests that the IC50 could be a good indicator of the blocking potency in these cases. However, others provided highly protocol dependent IC50 values, which could differ by even 2 orders of magnitude. Moreover, the protocols yielding the maximum IC50 and minimum IC50 depended on the drug, which complicates the definition of a "standard" protocol to minimize the influence of the stimulation protocol on the IC50 measurement in safety pharmacology. As a conclusion, we propose the adoption of our threeprotocol IC50 assay to estimate the potency to block hERG in vitro. If the IC50 values obtained for a compound are similar, then the IC50 could be used as an indicator of its blocking potency, otherwise kinetics and state-dependent binding properties should be accounted., This work was partially supported by the Direccion General de Polit ' ica Cientifica de la Generalitat Valenciana (PROMETEU2016/088), Ministerio de Economia y Competitividad, and Fondo Europeo de Desarrollo Regional (FEDER) DPI2015-69125-R (MINECO/FEDER, UE) as well as Ayuda a Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion. Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), Valencia, Spain. The research was also supported by the National Institutes of Health 1R01HL128537-01A1
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Documenting Paintings with Gigapixel Photography

  • Cabezos Bernal, Pedro Manuel|||0000-0001-5630-6429
  • Rodríguez Navarro, Pablo|||0000-0002-8044-9873
  • Gil Piqueras, Teresa|||0000-0001-8739-3705
[EN] Digital photographic capture of pictorial artworks with gigapixel resolution (around 1000 megapixels or greater) is a novel technique that is beginning to be used by some important international museums as a means of documentation, analysis, and dissemination of their masterpieces. This line of research is extremely interesting, not only for art curators and scholars but also for the general public. The results can be disseminated through online virtual museum displays, offering a detailed interactive visualization. These virtual visualizations allow the viewer to delve into the artwork in such a way that it is possible to zoom in and observe those details, which would be negligible to the naked eye in a real visit. Therefore, this kind of virtual visualization using gigapixel images has become an essential tool to enhance cultural heritage and to make it accessible to everyone. Since today's professional digital cameras provide images of around 40 megapixels, obtaining gigapixel images requires some special capture and editing techniques. This article describes a series of photographic methodologies and equipment, developed by the team of researchers, that have been put into practice to achieve a very high level of detail and chromatic fidelity, in the documentation and dissemination of pictorial artworks. The result of this research work consisted in the gigapixel documentation of several masterpieces of the Museo de Bellas Artes of Valencia, one of the main art galleries in Spain. The results will be disseminated through the Internet, as will be shown with some examples., This research was carried out within the Research Project entitled Captura fotografica de resolucion gigapixel para la documentacion y divulgacion del patrimonio pictorico (01/01/19-01/01/21), reference SP20180066. Project funded with the help of Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion,Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reducing the Overhead of BCH Codes: New Double Error Correction Codes

  • Saiz-Adalid, Luis-J.|||0000-0002-4868-2050
  • Gracia-Morán, Joaquín|||0000-0001-9715-8960
  • Gil Tomás, Daniel Antonio|||0000-0001-9225-1998
  • Baraza-Calvo, Juan-Carlos|||0000-0001-7692-2309
  • Gil, Pedro|||0000-0002-9364-7385
[EN] The Bose-Chaudhuri-Hocquenghem (BCH) codes are a well-known class of powerful error correction cyclic codes. BCH codes can correct multiple errors with minimal redundancy. Primitive BCH codes only exist for some word lengths, which do not frequently match those employed in digital systems. This paper focuses on double error correction (DEC) codes for word lengths that are in powers of two (8, 16, 32, and 64), which are commonly used in memories. We also focus on hardware implementations of the encoder and decoder circuits for very fast operations. This work proposes new low redundancy and reduced overhead (LRRO) DEC codes, with the same redundancy as the equivalent BCH DEC codes, but whose encoder, and decoder circuits present a lower overhead (in terms of propagation delay, silicon area usage and power consumption). We used a methodology to search parity check matrices, based on error patterns, in order to design the new codes. We implemented and synthesized them, and compared their results with those obtained for the BCH codes. Our implementation of the decoder circuits achieved reductions between 2.8% and 8.7% in the propagation delay, between 1.3% and 3.0% in the silicon area, and between 15.7% and 26.9% in the power consumption. Therefore, we propose LRRO codes as an alternative for protecting information against multiple errors., This research was supported in part by the Spanish Government, project TIN2016-81075-R, by Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), project 20190032, and by the Institute of Information and Communication Technologies (ITACA).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Performance of a Set of Eggplant (Solanum melongena) Lines With Introgressions From Its Wild Relative S. incanum Under Open Field and Screenhouse Conditions and Detection of QTLs

  • Mangino, Giulio
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Gramazio, Pietro|||0000-0003-2226-7999
[EN] Introgression lines (ILs) of eggplant (Solanum melongena) represent a resource of high value for breeding and the genetic analysis of important traits. We have conducted a phenotypic evaluation in two environments (open field and screenhouse) of 16 ILs from the first set of eggplant ILs developed so far. Each of the ILs carries a single marker-defined chromosomal segment from the wild eggplant relative S. incanum (accession MM577) in the genetic background of S. melongena (accession AN-S-26). Seventeen agronomic traits were scored to test the performance of ILs compared to the recurrent parent and of identifying QTLs for the investigated traits. Significant morphological differences were found between parents, and the hybrid was heterotic for vigour-related traits. Despite the presence of large introgressed fragments from a wild exotic parent, individual ILs did not display differences with respect to the recipient parent for most traits, although significant genotype x environment interaction (G x E) was detected for most traits. Heritability values for the agronomic traits were generally low to moderate. A total of ten stable QTLs scattered across seven chromosomes was detected. For five QTLs, the S. incanum introgression was associated with higher mean values for plant- and flower-related traits, including vigour prickliness and stigma length. For one flower- and four fruit-related-trait QTLs, including flower peduncle and fruit pedicel lengths and fruit weight, the S. incanum introgression was associated with lower mean values for fruit-related traits. Evidence of synteny to other previously reported in eggplant populations was found for three of the fruit-related QTLs. The other seven stable QTLs are new, demonstrating that eggplant ILs are of great interest for eggplant breeding under different environments., This work was undertaken as part of the initiative "Adapting Agriculture to Climate Change: Collecting, Protecting, and Preparing Crop Wild Relatives", which is supported by the Government of Norway. The project is managed by the Global Crop Diversity Trust with the Millennium Seed Bank of the Royal Botanic Gardens, Kew and implemented in partnership with national and international gene banks and plant breeding institutes around the world. For further information, see the project website: http://www.cwrdiversity.org/.Funding was also received from Spanish Ministerio de Economia, Industria y Competitividad and Fondo Europeo de Desarrollo Regional (grant AGL2015-64755-R from MINECO/FEDER); from Ministerio de Ciencia, Innovacion y Universidades, Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional (grant RTI-2018-094592-B-100 from MCIU/AEI/FEDER, UE); from European Union's Horizon 2020 Research and Innovation Programme under grant agreement No. 677379 (G2P-SOL project: Linking genetic resources, genomes and phenotypes of Solanaceous crops); and from Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (Ayuda a Primeros Proyectos de Investigacion; PAID-06-18). Giulio Mangino is grateful to Generalitat Valenciana for a predoctoral grant within the Santiago Grisolia programme (GRISOLIAP/2016/012). Pietro Gramazio is grateful to Japan Society for the Promotion of Science for a postdoctoral grant (P19105, FY2019 JSPS Postdoctoral Fellowship for Research in Japan (Standard)).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Twin-entry turbine losses: An analysis using CFD data

  • Galindo, José|||0000-0001-6068-182X
  • Serrano, J.R.|||0000-0003-0692-3917
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Medina, Nicolás
[EN] The current paper presents a computational fluid dynamics (CFD) flow behaviour and losses analysis of twin-entry radial turbines in terms of its Mass Flow Ratio (MFR, the ratio between the flow passing through one of its intake ports and its total mass flow), focusing on the mixing phenomena in the unequal admission conditions cases. The CFD simulations are first validated with experimental data. Then, the losses mechanisms are analysed and quantified in the different parts of the twin-entry turbine in terms of the MFR value. A sudden expansion is found at the junction of both branches in the interspace between volutes and rotor for unequal and partial admission cases. Tracking the flow coming from each of the turbine intake ports, it has been observed that both flow branches do not fully mix with each other within the rotor. Another source of losses has been identified in the contact between both flow branches due to their momentum exchange that depends on the difference between both flow branches velocities. These losses have not been considered before, and they should be included in mean line loss-based models for twin-entry turbine since they are very significant for unequal admission conditions., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: Nicolas Medina is partially supported through contract FPU17/02803 of Programa de Formacion de Profesorado Universitario of Spanish Ministerio de Ciencia, Innovacion y Universidades. This work has been partially supported by the 'Ayuda a Primeros Proyectos de Investigacion' (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Controlling the selectivity of bimetallic platinum¿ruthenium nanoparticles supported on N-doped graphene by adjusting their metal composition

  • Cerezo-Navarrete, Christian
  • Puche Panadero, Marta|||0000-0002-9390-5532
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Mathieu, Yannick
  • Morales, Cristina
  • Martínez-Prieto, Luis Miguel
[EN] Mono and bimetallic platinum-ruthenium nanoparticles have been generated on N-doped graphene (NH2-rGO) following an organometallic approach. Surface and structural studies confirmed the formation of bimetallic MNPs with controlled metal compositions. To evaluate the activity/selectivity of the different materials prepared we used the hydrogenation of acetophenone as a model reaction. We found that both the activity and selectivity of the supported-bimetallic NPs are highly dependent on the support and the atomic composition. The higher the Pt/Ru ratio, the higher the selectivity towards 1-phenylethanol. Indeed, a remarkable activity and selectivity in the hydrogenation of acetophenone was observed for Pt5Ru1@NH2-rGO. The reactivity of these catalysts was also investigated in the hydrogenation of other substrates such as functionalized arenes (i.e. nitrobenzene and benzaldehyde) or hydroxymethylfurfural (HMF), demonstrating that it is possible to control the activity and selectivity of bimetallic Pt-Ru MNPs supported on N-doped graphene by adjusting their metal composition., The authors thank Instituto de Tecnologia Quimica (ITQ), Consejo Superior de Investigaciones Cientificas (CSIC), and Universitat Politecnica de Valencia (UPV) for the facilities, and Severo Ochoa excellence programme (SEV-2016-0683), "Juan de la Cierva" programme (IJCI-2016-27966) and Primero Proyectos de Investigacion (PAID-06-18) for financial support. C. C.-N. gratefully thanks Generalitat Valenciana predoctoral fellowship (GVA: ACIF/2019/076). We also thank the Electron Microscopy Service of the UPV for TEM facilities and A. Garcia Zaragoza for his assistance in catalytic reactions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effectiveness of a combined transcranial direct current stimulation and virtual reality-based intervention on upper limb function in chronic individuals post-stroke with persistent severe hemiparesis: a randomized controlled trial

  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
  • Borrego, Adrián|||0000-0001-5134-7811
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Fuentes, María Antonia
  • Latorre, Jorge
  • Colomer, Carolina
  • Noé, Enrique
[EN] Background Functional impairments derived from the non-use of severely affected upper limb after stroke have been proposed to be mitigated by action observation and imagination-based techniques, whose effectiveness is enhanced when combined with transcranial direct current stimulation (tDCS). Preliminary studies in mildly impaired individuals in the acute phase post-stroke show intensified effects when action is facilitated by tDCS and mediated by virtual reality (VR) but the effectiveness in cases of severe impairment and chronic stroke is unknown. This study investigated the effectiveness of a combined tDCS and VR-based intervention in the sensorimotor function of chronic individuals post-stroke with persistent severe hemiparesis compared to conventional physical therapy. Methods Twenty-nine participants were randomized into an experimental group, who received 30 minutes of the combined tDCS and VR-based therapy and 30 minutes of conventional physical therapy, or a control group, who exclusively received conventional physical therapy focusing on passive and active assistive range of motion exercises. The sensorimotor function of all participants was assessed before and after 25 one-hour sessions, administered three to five times a week, using the upper extremity subscale of the Fugl-Meyer Assessment, the time and ability subscales of the Wolf Motor Function Test, and the Nottingham Sensory Assessment. Results A clinically meaningful improvement of the upper limb motor function was consistently revealed in all motor measures after the experimental intervention, but not after conventional physical therapy. Similar limited effects were detected in the sensory function in both groups. Conclusion The combined tDCS and VR-based paradigm provided not only greater but also clinically meaningful improvement in the motor function (and similar sensory effects) in comparison to conventional physical therapy., This study was funded by Conselleria de Educacion, Investigacion, Cultura y Deporte of Generalitat Valenciana (Project SEJI/2019/017), Ministerio de Economia y Competitividad of Spain (Projects TIN2014-61975-EXP and RTC-2017-6051-7 and Grant BES-2014-068218), and by Vicerrectorado de Investigacion, Innovacion y transferencia of Universitat Politecnica de Valencia (PAID-06-18)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ultrafast Codes for Multiple Adjacent Error Correction and Double Error Detection

  • Saiz-Adalid, Luis-J.|||0000-0002-4868-2050
  • Gracia-Morán, Joaquín|||0000-0001-9715-8960
  • Gil Tomás, Daniel Antonio|||0000-0001-9225-1998
  • Baraza-Calvo, Juan-Carlos|||0000-0001-7692-2309
  • Gil, Pedro|||0000-0002-9364-7385
[EN] Reliable computer systems employ error control codes (ECCs) to protect information from errors. For example, memories are frequently protected using single error correction-double error detection (SEC-DED) codes. ECCs are traditionally designed to minimize the number of redundant bits, as they are added to each word in the whole memory. Nevertheless, using an ECC introduces encoding and decoding latencies, silicon area usage and power consumption. In other computer units, these parameters should be optimized, and redundancy would be less important. For example, protecting registers against errors remains a major concern for deep sub-micron systems due to technology scaling. In this case, an important requirement for register protection is to keep encoding and decoding latencies as short as possible. Ultrafast error control codes achieve very low delays, independently of the word length, increasing the redundancy. This paper summarizes previous works on Ultrafast codes (SEC and SEC-DED), and proposes new codes combining double error detection and adjacent error correction. We have implemented, synthesized and compared different Ultrafast codes with other state-of-the-art fast codes. The results show the validity of the approach, achieving low latencies and a good balance with silicon area and power consumption., This work was supported in part by the Spanish Government under Project TIN2016-81075-R, and in part by the Primeros Proyectos de Investigacion, Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), Valencia, Spain, under Project PAID-06-18 20190032.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptive time-step control for modal methods to integrate the neutron diffusion equation

  • Carreño, Amanda|||0000-0003-2302-1157
  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The solution of the time-dependent neutron diffusion equation can be approximated using quasi-static methods that factorise the neutronic flux as the product of a time dependent function times a shape function that depends both on space and time. A generalization of this technique is the updated modal method. This strategy assumes that the neutron flux can be decomposed into a sum of amplitudes multiplied by some shape functions. These functions, known as modes, come from the solution of the eigenvalue problems associated with the static neutron diffusion equation that are being updated along the transient. In previous works, the time step used to update the modes is set to a fixed value and this implies the need of using small time-steps to obtain accurate results and, consequently, a high computational cost. In this work, we propose the use of an adaptive control time-step that reduces automatically the time-step when the algorithm detects large errors and increases this value when it is not necessary to use small steps. Several strategies to compute the modes updating time step are proposed and their performance is tested for different transients in benchmark reactors with rectangular and hexagonal geometry., This work has been partially supported by Spanish Ministerio de Economia y Competitividad under projects ENE2017-89029-P and MTM2017-85669-P and financed with the help of a Primeros Proyectos de Investigacion (PAID-06-18) from Vicerrectorado de Investigacion, Innovacion y Transferencia of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Identification of the system character through accumulated charge curve

  • Martínez-Ibernón, Ana|||0000-0003-2136-5650
  • Ramón Zamora, José Enrique
  • Bataller, Román
  • Soto Camino, Juan
[EN] The corrosion rate in metals is usually studied by means of the application a potential signal with the purpose of leading the system to unbalance conditions, due to an electric current response is produced. This response is recorded and processed through the electric circuit analogy. Doing the fitting of the response to the properly model is getting the corrosion current. The application of voltammetric potential pattern to the analysis of corrosion, it is very useful, because does not produce polarization of the system. There fore, with this technique is possible to perform tests in sequence without the results being affected. Furthermore, through the integration over time of the electric current response, the accumulated electric charge curve is got which is very useful to the quickly identification of the system behaviour (faradic or non-faradic behaviour). In this paper, it is showed the capability of characterization a system through the accumulated electric charge; it allows identifying at a glance if the system has a faradic behaviour or a non-faradic behaviour. This will be very effective in the monitoring of the metal elements that are out of sight, such as: buried metal conduits or the reinforcement bars in the reinforcement concrete structures., The authors would like to express their gratitude to the Spanish Ministry of Science and Innovation for the pre-doctoral scholarship granted to Ana Martínez Ibernón (FPU 16/00723). To the Universitat Politècnica de València for the financial support in the project Ayudas a Primeros Proyectos de Investigación (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Otros (Other)

Does AI Qualify for the Job?A Bidirectional Model Mapping Labour and AI Intensities (Appendix)

  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Tolan, Songül
  • Pesole, Annarosa
  • Fernández-Macías, Enrique
  • Gómez, Emilia
This appendix contains supplementary material of the paper "Does AI Qualify for the Job?A Bidirectional Model Mapping Labour and AI Intensities", in Proceedings of the 2020 AAAI/ACM Conference on AI, Ethics, and Society (AIES '20), February 7--8, 2020, New York, NY, USA., This material is based upon work supported by the EU (FEDER), and the Spanish MINECO under grant RTI2018-094403-B-C3, the Generalitat Valenciana PROMETEO/2019/098. F. Martínez-Plumed was also supported by INCIBE (Ayudas para la excelencia de los equipos de investigacion avanzada en ciberseguridad), the European Commission (JRC) HUMAINT project (CT-EX2018D335821-101), and UPV (PAID-06-18). J. H-Orallo is also funded by an FLI grant RFP2-152.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative analysis of the responses to water stress in eggplant (Solanum melongena) cultivars

  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Fita, Ana|||0000-0002-8637-5852
  • Vicente, Oscar|||0000-0001-5076-3784
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Boscaiu, Monica|||0000-0002-9691-4223
  • Nguyen, Huu Trong
  • González-Orenga, Sara
[EN] Little information is available on the physiological and biochemical responses to water stress in eggplant (Solanum melongena). We valuated four genetically diverse eggplant varieties (MEL3-MEL6) under control and water stress conditions. Measurements were taken for plant growth, tissue water content, levels of chlorophylls a and b, carotenoids, roline, malondialdehyde, total phenolics, total flavonoids, superoxide dismutase (SOD), catalase (CAT), ascorbate peroxidase APX), and glutathione reductase (GR) activities. For most traits, the water stress treatment had a greater contribution than the variety effect to the total sums of squares in an ANOVA analysis, except for total flavonoids, SOD, APX, and GR. The water stress treatment had a strong effect on plant growth and tissue water content. In general, water tress reduced the three photosynthetic pigments, increased proline, malondialdehyde, total phenolics, and total flavonoids, although some varietal differences were ob- served. Different patterns were also detected in the activities of the four enzymes evaluated, but few differences were observed for individual varieties between the control and water stress treatments. Many significant phe- notypic orrelations were observed among the traits studied, but only eight environmental correlations were detected. A PCA analysis distinctly separated individuals according to the treatment, and revealed a clearer separation of varieties under water stress than under control conditions, pointing to varietal differences in the responses to stress. Our results suggest that proline could be used as a marker for drought stress tolerance in this species. The information obtained provides new insight on the physiological and biochemical responses of eggplant to drought stress, Authors are grateful to the European Union's Horizon 2020 Research and Innovation Programme under grant agreement No 677379 (G2P-SOL project: Linking genetic resources, genomes and phenotypes of Solanaceous crops), to Ministerio de Economfa, Industria y Competitividad and Fondo Europeo de Desarrollo Regional (grant AGL2015-64755-R from MINECO/FEDER), to Ministerio de Ciencia, Innovation y Universidades, Agencia Estatal de Investigation and Fondo Europeo de Desarrollo Regional (grant RTI-2018-094592-B-100 from MCIU/AEI/FEDER, UE), to the Generalitat Valenciana and Fondo Social Europeo (Ayuda a Grupos Emergentes; GV/2019/033), to the Vicerrectorado de Investigacien, Innovation y Transferencia de la Universitat Politecnica de Valencia (Ayuda a Primeros Proyectos de Investigation; PAID-06-18), and to the initiative "Adapting Agriculture to Climate Change: Collecting, Protecting and Preparing Crop Wild Relatives", which is supported by the Government of Norway. This latter project is managed by the Global Crop Diversity Trust with the Millennium Seed Bank of the Royal Botanic Gardens, Kew and implemented in partnership with national and international gene banks and plant breeding institutes around the world. For further information see the project website: http://www.cwrdiversity.org/. Mariola Plazas is grateful to Generalitat Valenciana and Fondo Social Europeo for a post-doctoral contract (APOSTD/2018/014). The contribution of Huu Trong Nguyen to this paper has been developed as a result of a mobility stay funded by Erasmus + KA1 Erasmus Mundus Joint Master Degrees Programme of the European Commission under the PLANT HEALTH project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Non-cooperative Game-Theoretic Approach for Conflict Resolution in Multi-agent Planning

  • Jordán, Jaume|||0000-0003-0400-9136
  • Onaindia De La Rivaherrera, Eva|||0000-0001-6931-8293
  • Torreño Lerma, Alejandro
  • de Weerdt, Mathijs
[EN] This paper presents FENOCOP, a game-theoretic approach for solving non-cooperative planning problems that involve a set of self-interested agents. Each agent wants to execute its own plan in a shared environment but the plans may be rendered infeasible by the appearance of potential conflicts; agents are willing to coordinate their plans in order to avoid conflicts during a joint execution. In order to attain a conflict-free combination of plans, agents must postpone the execution of some of their actions, which negatively affects their individual utilities. FENOCOP is a two-level game approach: the General Game selects a Nash equilibrium among several combinations of plans, and the Scheduling Game generates, for a combination of plans, an executable outcome by introducing delays in the agents¿ plans. For the Scheduling Game, we developed two algorithms that return a Pareto optimal and fair equilibrium from which no agent would be willing to deviate., This work is supported by the Spanish MINECO project TIN2017-88476-C2-1-R. Jaume Jordan is funded by grant APOSTD/2018/010 of Generalitat Valenciana - Fondo Social Europeo and by UPV PAID-06-18 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An energy-aware algorithm for electric vehicle infrastructures in smart cities

  • Palanca Cámara, Javier|||0000-0002-6209-9603
  • Jordán, Jaume|||0000-0003-0400-9136
  • Botti V.|||0000-0002-6507-2756
  • Bajo, Javier
[EN] The deployment of a charging infrastructure to cover the increasing demand of electric vehicles (EVs) has become a crucial problem in smart cities. Additionally, the penetration of the EV will increase once the users can have enough charging stations. In this work, we tackle the problem of locating a set of charging stations in a smart city considering heterogeneous data sources such as open data city portals, geo-located social network data, and energy transformer substations. We use a multi-objective genetic algorithm to optimize the charging station locations by maximizing the utility and minimizing the cost. Our proposal is validated through a case study and several experimental results., This work was partially supported by MINECO/FEDER, Spain RTI2018-095390-B-C31 project of the Spanish government. Jaume Jordan and Vicent Botti are funded by UPV, Spain PAID-06-18 project. Jaume Jordan is also funded by grant APOSTD/2018/010 of Generalitat Valenciana -Fondo Social Europeo, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

When, How, and to What Extent Are Individuals with Unresponsive Wakefulness Syndrome Able to Progress? Neurobehavioral Progress

  • Noé Sebastián, Enrique
  • Ferri, Joan
  • Olaya, José
  • Navarro, María Dolores
  • O'Valle, Myrtha
  • Colomer Font, Carolina
  • Moliner, Belén
  • Ippoliti, Camilla
  • Maza, Anny
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
[EN] Accurate estimation of the neurobehavioral progress of patients with unresponsive wakefulness syndrome (UWS) is essential to anticipate their most likely clinical course and guide clinical decision making. Although different studies have described this progress and possible predictors of neurobehavioral improvement in these patients, they have methodological limitations that could restrict the validity and generalization of the results. This study investigates the neurobehavioral progress of 100 patients with UWS consecutively admitted to a neurorehabilitation center using systematic weekly assessments based on standardized measures, and the prognostic factors of changes in their neurobehavioral condition. Our results showed that, during the analyzed period, 34% of the patients were able to progress from UWS to minimally conscious state (MCS), 12% of the total sample (near one third from those who progressed to MCS) were able to emerge from MCS, and 10% of the patients died. Transition to MCS was mostly denoted by visual signs, which appeared either alone or in combination with motor signs, and was predicted by etiology and the score on the Coma Recovery Scale-Revised at admission with an accuracy of 75%. Emergence from MCS was denoted in the same proportion by functional communication and object use. Predictive models of emergence from MCS and mortality were not valid and the identified predictors could not be accounted for, This research was funded by the program RISE-Marie-Slodowska-Curie of the European Commission (Grant agreement 778234), by Conselleria de Educacion, Investigacion, Cultura y Deporte of Generalitat Valenciana (SEJI/2019/017), and by Vicerrectorado de Investigacion, Innovacion y transferencia of Universitat Politecnica de Valencia (PAID-06-18)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Surrogate Fuel Formulation to Improve the Dual-Mode Dual-Fuel Combustion Operation at Different Operating Conditions

  • Benajes, Jesús|||0000-0002-1653-9188
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Lago-Sari, Rafael
[EN] Dual-mode dual-fuel combustion is a promising combustion concept to achieve the required emissions and CO2 reductions imposed by the next standards. Nonetheless, the fuel formulation requirements are stricter than for the single-fuel combustion concepts as the combustion concept relies on the reactivity of two different fuels. This work investigates the effect of the low reactivity fuel sensitivity (S=RON-MON) and the octane number at different operating conditions representative of the different combustion regimes found during the dual-mode dual-fuel operation. For this purpose, experimental tests were performed using a PRF 95 with three different sensitivities (S0, S5 and S10) at operating conditions of 25% load/950 rpm, 50%/1800 rpm and 100%/2200 rpm. Moreover, air sweeps varying ±10% around a reference air mass were performed at 25%/1800 rpm and 50%/1800 rpm. Conventional diesel fuel was used as high reactivity fuel in all the cases. Moreover, commercial 95 RON gasoline was used as reference to compare the different TRFs. The engine settings were managed to adjust the rate of heat release to that found with 95 RON gasoline. To do this, a quality index imposing a maximum deviation of 5% point-to-point between the HRR curves from both fuels was defined. The results suggest that PRF 95 with S0 has the most similar behavior compared to conventional 95 RON gasoline whatever the engine load. As the engine load increases, the sensitivity effect is more noticeable and iso-HRR operation was only possible for S0. At low and medium load, the TRFs present similar engine-out emissions with equal fuel consumption. At full load, the NOx emissions are increased with respect to the reference 95 RON gasoline without fuel consumption benefits. The results from the air variation for the different octane numbers demonstrated that the greatest differences are obtained for low air mass (i.e, higher EGR). In addition, the decrease of the octane number limits the maximum air increase due to the pressure gradients, requiring modifications in the engine settings that increase the soot formation., The authors thanks VOLVO Group Trucks Technology and ARAMCO Overseas Company for supporting this research. The authors also acknowledge FEDER and Spanish Ministerio de Economía y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R) and the Universitat Politècnica de València for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigación (PAID-06-18). The author R. Sari acknowledges the financial support from the Spanish ministry of science innovation and universities under the grant ¿Ayudas para contratos predoctorales para la formación de doctores¿ (PRE2018-085043).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Proposal of an Adaptive Fault Tolerance Mechanism to Tolerate Intermittent Faults in RAM

  • Baraza-Calvo, Juan-Carlos|||0000-0001-7692-2309
  • Gracia-Morán, Joaquín|||0000-0001-9715-8960
  • Saiz-Adalid, Luis-J.|||0000-0002-4868-2050
  • Gil Tomás, Daniel Antonio|||0000-0001-9225-1998
  • Gil, Pedro|||0000-0002-9364-7385
[EN] Due to transistor shrinking, intermittent faults are a major concern in current digital systems. This work presents an adaptive fault tolerance mechanism based on error correction codes (ECC), able to modify its behavior when the error conditions change without increasing the redundancy. As a case example, we have designed a mechanism that can detect intermittent faults and swap from an initial generic ECC to a specific ECC capable of tolerating one intermittent fault. We have inserted the mechanism in the memory system of a 32-bit RISC processor and validated it by using VHDL simulation-based fault injection. We have used two (39, 32) codes: a single error correction-double error detection (SEC-DED) and a code developed by our research group, called EPB3932, capable of correcting single errors and double and triple adjacent errors that include a bit previously tagged as error-prone. The results of injecting transient, intermittent, and combinations of intermittent and transient faults show that the proposed mechanism works properly. As an example, the percentage of failures and latent errors is 0% when injecting a triple adjacent fault after an intermittent stuck-at fault. We have synthesized the adaptive fault tolerance mechanism proposed in two types of FPGAs: non-reconfigurable and partially reconfigurable. In both cases, the overhead introduced is affordable in terms of hardware, time and power consumption., This research was supported in part by the Spanish Government, project TIN2016-81,075-R, and by Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), project 20190032.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Maximizing the Profit for Industrial Customers of Providing Operation Services in Electric Power Systems via a Parallel Particle Swarm Optimization Algorithm

  • Rodríguez-García, Javier|||0000-0002-9637-9208
  • Ribó-Pérez, David Gabriel|||0000-0003-1089-5197
  • Álvarez, Carlos|||0000-0002-8238-1606
  • Peñalvo-López, Elisa|||0000-0002-3143-822X
[EN] Integration of renewable energy sources require an increase in the flexibility of power systems. Demand response is a valuable flexible resource that is not currently being fully exploited. Small and medium industrial consumers can deliver a wide range of underused flexibility resources associated with the electricity consumption in their production processes. Flexible resources should compete in liberalized operation markets to ensure the reliability of the system at a minimum cost. This paper presents a new tool to assist industrial demand response to participate in operation markets and optimize its value. The tool uses a combined physical-mathematical modelling of the industrial demand response and a Parallel Particle Swarm Optimization algorithm specifically tuned for the proposed problem to maximize the profit. The main advantages of the proposed tool are demonstrated in the paper through its application to the participation of a meat factory in the Spanish tertiary reserve market during a whole year using a quarter-hourly time resolution. The enhanced performance of the proposed tool with respect to previous methodologies is shown with these four flexible processes examples, where the maximum available profit obtained in the simultaneous consideration of all different flexible processes is computed. The flexible processes are technical and economically characterized in a way that makes the tool valid for most of the processes in the industry., This work was supported in part by the Primeros Proyectos de Investigacion under Grant PAID-06-18, in part by the Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV) Valencia-Spain, Generalitat Valenciana through the Research Project under Grant AICO/2019/001, in part by the Spanish Administration under Grant FPU2016/00962, in part by the AEI/10.13039/501100011033 (Ministerio de Ciencia, Innovacion y Universidades, Spanish Government) through the Research Projects under Grant ENE-2016-78509-C3-1-P and Grant RED2018-102618-T, and in part by the EU FEDER Funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New Hermite series expansion for computing the matrix hyperbolic cosine

  • Defez Candel, Emilio|||0000-0002-3303-6371
  • Ibáñez González, Jacinto Javier|||0000-0002-6912-4453
  • Peinado Pinilla, Jesús|||0000-0002-9048-5106
  • Alonso-Jordá, Pedro|||0000-0002-6882-6592
  • Alonso Abalos, José Miguel|||0000-0001-6812-7364
[EN] There are, currently, very few implementations to compute the hyperbolic cosine of a matrix. This work tries to fill this gap. To this end, we first introduce both a new rational-polynomial Hermite matrix expansion and a formula for the forward relative error of Hermite approximation in exact arithmetic with a sharp bound for the forward error. This matrix expansion allows obtaining a new accurate and efficient method for computing the hyperbolic matrix cosine. We present a MATLAB implementation, based on this method, which shows a superior efficiency and a better accuracy than other state-of-the-art methods. The algorithm developed on the basis of this method is also able to run on an NVIDIA GPU thanks to a MEX file that connects the MATLAB implementation to the CUDA code., This work has been partially supported by Spanish Ministerio de Economia, Industria y Competitividad and European Regional Development Fund (ERDF) grants TIN2017-89314-P and by the Programa de Apoyo a la Investigacion y Desarrollo 2018 of the Universitat Politecnica de Valencia, Spain (PAID-06-18) grants SP20180016.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the Thermal Energy Storage Strategy on the Performance of a Booster Heat Pump for Domestic Hot Water Production System Based on the Use of Low Temperature Heat Source

  • Masip, X.
  • Corberán, José M.
  • Navarro-Peris, Emilio|||0000-0002-0608-2129
[EN] Energy recovery from a low temperature heat source using heat pump technology is becoming a popular application. The domestic hot water demand has the characteristic of being very irregular along the day, with periods in which the demand is very intensive and long periods in which it is quite small. In order to use heat pumps for this kind of applications efficiently, the proper sizing and design of the water storage tank is critical. In this work, the optimal sizing of the two possible tank alternatives, closed stratified tank and variable-water-volume tank, is presented, and their respective performance compared, for domestic hot water production based on low temperature energy recovery in two potential applications (grey water and ultra-low temperature district heating). The results show that the efficiency of these kind of systems is very high and that variable-water-volume tanks allow a better use of the energy source, with an 8% higher exergy efficiency and around 3% better seasonal performance factor (SPF), being able to provide similar comfort levels with a smaller system size, "Vicerectorado de Investigacion, Innovacion y Transferencia of the Universitat Politecnica de Valencia (Spain)" throught the project "REDUCCION DE LAS EMISIONES DE CO2 A ALTA TEMPERATURE A PARTIR DE LA RECUPERACION DE CALOR RESIDUAL MEDIANTE EL USO DE UNA BOMBA DE CALOR"with the reference SP20180039 from the program "Primeros proyectos de investigacion (PAID-06-18)".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bandwidth-Aware Dynamic Prefetch Configuration for IBM POWER8

  • Navarro, Carlos
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Advanced hardware prefetch engines are being integrated in current high-performance processors. Prefetching can boost the performance of most applications, however, the induced bandwidth consumption can lead the system to a high contention for main memory bandwidth, which is a scarce resource in current multicores. In such a case, the system performance can be severely damaged. This article characterizes the applications' behavior in an IBM POWER8 machine, which presents many prefetch settings, varying the bandwidth contention. The study reveals that the best prefetch setting for each application depends on the main memory bandwidth availability, that is, it depends on the co-running applications. Based on this study, we propose Bandwidth-Aware Prefetch Configuration (BAPC) a scalable adaptive prefetching algorithm that improves the performance of multi-program workloads. BAPC increases the performance of the applications in a 12, 15, and 16 percent of 6-, 8-, and 10-application workloads over the IBM POWER8 default configuration. In addition, BAPC reduces bandwidth consumption in 39, 42, and 45 percent, respectively., This work was supported in part by Ministerio de Ciencia, Innovacion y Universidades and the European ERDF under Grant RTI2018-098156-B-C51, Generalitat Valenciana under Grant AICO/2019/317, and Universitat Politenica de Valencia (PAID-06-18) under Grant SP20180140.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

When, How, and to What Extent Are Individuals with Unresponsive Wakefulness Syndrome Able to Progress? Functional Independence

  • Olaya, José
  • Noé, Enrique
  • Navarro, María Dolores
  • O'Valle, Myrtha
  • Colomer, Carolina
  • Moliner, Belén
  • Ippoliti, Camilla
  • Ferri, Joan
  • Maza, Anny
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
[EN] Accurate estimation of the functional independence of patients with unresponsive wakefulness syndrome (UWS) is essential to adjust family and clinical expectations and plan long-term necessary resources. Although different studies have described the clinical course of these patients, they have methodological limitations that could restrict generalization of the results. This study investigates the neurobehavioral progress of 100 patients with UWS consecutively admitted to a neurorehabilitation center using systematic weekly assessments based on standardized measures, and the functional independence staging of those patients who emerged from a minimally conscious state (MCS) during the first year post-emergence. Our results showed that one year after emergence, most patients were severely dependent, although some of them showed extreme or moderate severity. Clinically meaningful functional improvement was less likely to occur in cognitively-demanding activities, such as activities of daily living and executive function. Consequently, the use of specific and staging functional independence measures, with domain-specific evaluations, are recommended to detect the functional changes that might be expected in these patients. The information provided by these instruments, together with that obtained from repeated assessments of the preserved consciousness with standardized instruments, could help clinicians to adjust expectations and plan necessary resources for this population., This research was funded by the program RISE-Marie-Slodowska-Curie of the European Commission (Grant agreement 778234), by Conselleria de Educacion, Investigacion, Cultura y Deporte of Generalitat Valenciana (SEJI/2019/017), and by Vicerrectorado de Investigacion, Innovacion y transferencia of Universitat Politecnica de Valencia (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cobalt nanoclusters coated with N-doped carbon for chemoselective nitroarene hydrogenation and tandem reactions in water

  • Gutiérrez-Tarriño, Silvia
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Rojas-Buzo, Sergio
  • Lopes, Christian W.
  • Agostini, Giovanni
  • Calvino, José J.
[EN] The development of active and selective non-noble metal-based catalysts for the chemoselective reduction of nitro compounds in aquo media under mild conditions is an attractive research area. Herein, the synthesis of subnanometric and stable cobalt nanoclusters, covered by N-doped carbon layers as core shell (CoaNC-800), for the chemoselective reduction of nitroarenes is reported. The Co@NC-800 catalyst was prepared by the pyrolysis of the Co(tpy)(2) complex impregnated on Vulcan carbon. In fact, the use of a molecular complex based on six N-Co bonds drives the formation of a well-defined and distributed cobalt core-shell nanocluster covered by N-doped carbon layers. In order to elucidate its nature, it has been fully characterized by using several advanced techniques. in addition, this as-prepared catalyst showed high activity, chemoselectivity and stability toward the reduction of nitro compounds with H-2 and under mild reaction conditions; water was used as a green solvent, improving the previous results based on cobalt catalysts. Moreover, the Co@NC-800 catalyst is also active and selective for the one-pot synthesis of secondary aryl amines and isoindolinones through the reductive amination of nitroarenes. Finally, based on diffraction and spectroscopic studies, metallic cobalt nanoclusters with surface CoNx patches have been proposed as the active phase in the Co@NC-800 material., The authors acknowledge the financial support from the Spanish Government (RTI2018-096399-A-I00) and the Program Severo Ochoa SEV-2016-0683. S. G. T. is thankful to MINECO for her FPU Ph.D. contract FPU16/02117. P. O.-B. is thankful to MICCIN for his Ramon y Cajal contract RYC-2014-16620 and to UPV for the grant PAID-06-18/SP20180172 The High-Resolution STEM data were recorded at the DME-UCA node of the ELECMI ICTS Spanish National Infrastructure for Electron Microscopy of Materials. JJC acknowledges financial support from MINECO/FEDER (Project MAT2017-97579-R). C. W. L. acknowledges the Visiting Researcher Fellowship from PRH 50.1 - ANP/FINEP Human Resources Program (Brazil).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computational optimization of the dual-mode dual-fuel concept through genetic algorithm at different engine loads

  • Xu, Guangfu
  • Jia, Ming
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • García Martínez, Antonio|||0000-0001-5783-4936
[EN] The diesel/gasoline dual-mode dual-fuel (DMDF) combustion concept was optimized in a compression-ignition engine by combining the computational fluid dynamics (CFD) simulations with the genetic algorithm. Seven operating parameters with remarkable influences on the engine performance were chosen as the variables to be optimized for simultaneously minimizing the fuel efficiency, nitrogen oxides (NOx), and soot emissions. Moreover, the potential of the further improvement of the DMDF combustion concept was discussed, and the rationality of this strategy was demonstrated. The results indicate that, at low load, simultaneous improvement of the fuel economy and emissions can be realized by strengthening the homogeneous combustion. At mid load, the fuel economy can be improved by reducing the heat transfer losses, while the NOx emissions are sacrificed to some extent. At high load, improved fuel economy can be realized by transferring a part of diffusion combustion to premixed reactivity-controlled compression ignition (RCCI) combustion. Concerning the operating parameters, lower intake temperature is beneficial to decrease the transfer losses, and the control of intake temperature is crucial for the stable operation of DMDF combustion under wide load conditions. Overall, gross indicated thermal efficiency above 45% is achieved, and the NOx and soot emission can be maintained under the Euro 6 standard for the test load range., This work was partially supported by the National Natural Science Foundation of China (Grant Nos. 51961135105 and 91641117) and China Postdoctoral Science Foundation (Grant No. 2019M661094). The experimental results used in this investigation were obtained in a project funded by VOLVO Group Trucks Technology. The authors also acknowledge FEDER and Spanish Ministerio de Economia y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R) and the Universitat Politecnica de Valencia for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigacion (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Load Generators for Automatic Simulation of Urban Fleets

  • Martí, Pasqual|||0000-0001-6406-0641
  • Jordán, Jaume|||0000-0003-0400-9136
  • Palanca Cámara, Javier|||0000-0002-6209-9603
  • Julian, Vicente|||0000-0002-2743-6037
[EN] To ensure cities sustainability, we must deal with, among other challenges, traffic congestion, and its associated carbon emissions. We can approach such a problem from two perspectives: the transition to electric vehicles, which implies the need for charging station infrastructure, and the optimization of traffic flow. However, cities are complex systems, so it is helpful to test changes on them in controlled environments like the ones provided by simulators. In our work, we use SimFleet, an agent-based fleet simulator. Nevertheless, SimFleet does not provide tools for easily setting up big experiments, neither to simulate the realistic movement of its agents inside a city. Aiming to solve that, we enhanced SimFleet introducing two fully configurable generators that automatize the creation of experiments. First, the charging stations generator, which allocates a given amount of charging stations following a certain distribution, enabling to simulate how transports would charge and compare distributions. Second, the load generator, which populates the experiment with a given number of agents of a given type, introducing them dynamically in the simulation, and assigns them a movement that can be either random or based on real city data. The generators proved to be useful for comparing different distributions of charging stations as well as different agent behaviors over the same complex setup., This work was partially supported by MINECO/FEDER RTI2018-095390-B-C31 project of the Spanish government. Pasqual Martí and Jaume Jordán are funded by UPV PAID-06-18 project. Jaume Jordán is also funded by grant APOSTD/2018/010 of Generalitat Valenciana - Fondo Social Europeo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical Study of Wave Forces on Crown Walls of Mound Breakwaters with Parapets

  • Molines, Jorge|||0000-0001-7850-0759
  • Bayón, Arnau|||0000-0001-5007-0208
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] The influence of parapets on crown walls of mound breakwaters on wave forces has not been extensively analyzed in the literature. In this study, numerical experiments were carried out using the open-source platform OpenFOAM(R) to evaluate the influence of nine crown wall geometries with and without parapets. The OpenFOAM(R) model was validated with laboratory experiments. Dimensionless horizontal forces and overturning moments due to horizontal forces increase when there is a parapet. Dimensionless up-lift forces provide similar results, regardless of the existence of a parapet. Crown walls with parapets increase the horizontal wave forces and overturning moments due to horizontal wave forces by a factor of two., This research was funded by (1) Universitat Politecnica de Valencia (Grant SP20180111, Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia) and (2) Spanish Ministerio de Ciencia, Innovacion y Universidades (Grant RTI2018-101073-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the inverse of the Caputo matrix exponential

  • Defez Candel, Emilio|||0000-0002-3303-6371
  • Tung, Michael Ming-Sha|||0000-0002-8760-0927
  • Alonso Abalos, José Miguel|||0000-0001-6812-7364
  • Chen-Charpentier, Benito M.
[EN] Matrix exponentials are widely used to efficiently tackle systems of linear differential equations. To be able to solve systems of fractional differential equations, the Caputo matrix exponential of the index a > 0 was introduced. It generalizes and adapts the conventional matrix exponential to systems of fractional differential equations with constant coefficients. This paper analyzes the most significant properties of the Caputo matrix exponential, in particular those related to its inverse. Several numerical test examples are discussed throughout this exposition in order to outline our approach. Moreover, we demonstrate that the inverse of a Caputo matrix exponential in general is not another Caputo matrix exponential., This work has been partially supported by Spanish Ministerio de Economia y Competitividad and European Regional Development Fund (ERDF) grants TIN2017-89314-P and by the Programa de Apoyo a la Investigacion y Desarrollo 2018 of the Universitat Politecnica de Valencia (PAID-06-18) grant SP20180016.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Distribution of individual wave overtopping volumes on mound breakwaters

  • Molines, Jorge|||0000-0001-7850-0759
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
  • Herrera, Maria P.
[EN] Conventional mound breakwaters are usually designed to withstand low mean wave overtopping discharges and a low proportion of overtopping waves (P-ow). Existing formulas to estimate P-ow, and maximum individual wave overtopping volume are usually based on tests with high P-ow; this study is focused on mound breakwaters subjected to P-ow, < 0.2. The performance of the 2-parameter Weibull and Exponential distributions is examined in order to describe individual wave overtopping volumes of mound breakwaters in non-breaking wave conditions. A new methodology is applied to 164 small-scale 2D physical tests to identify the number of overtopping waves, and the corresponding individual wave overtopping volumes. Utility functions are used to consider the relative relevance of the observed data: in this study, a quadratic utility function depending on all the individual wave overtopping volumes and step utility functions with 10%, 30% and 50% of the highest volumes are used to fit the Weibull and Exponential distributions. In this study, a new estimator of P-ow is proposed to improve the predictions required to estimate the maximum individual wave overtopping volume. Existing estimators of P-ow, underpredict the largest values of P-ow, measured in the physical tests. The parameters fitted to the Weibull and Exponential distributions using the quadratic utility function provide estimations of the dimensionless maximum individual wave overtopping volume with relative mean squared errors rMSE = 10.4% and 10.6%, respectively. When CLASH Neural Network-estimated mean overtopping rates are used to predict the maximum individual wave overtopping with the quadratic utility function, the 2-parameter Weibull and Exponential distributions provide rMSE = 31.6% and rMSE = 33.3%, respectively. The new estimators proposed in this study improve the predictions of P-ow and maximum individual wave overtopping volumes on conventional mound breakwaters designed for low wave overtopping rates., The authors are grateful for financial support from European FEDER and Spanish Ministerio de Economia y Competitividad (Grants BIA2012-33967 and BIA2015-70435-R), SATO (OHL Group), Universitat Politecnica de Valencia (Grant SP20180111, Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia) and CDTI (Centro para el Desarrollo Tecnologico e Industrial). The authors also thank Debra Westall for revising the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thread Isolation to Improve Symbiotic Scheduling on SMT Multicore Processors

  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Eeckhout, Lieven
[EN] Resource sharing is a critical issue in simultaneous multithreading (SMT) processors as threads running simultaneously on an SMT core compete for shared resources. Symbiotic job scheduling, which co-schedules applications with complementary resource demands, is an effective solution to maximize hardware utilization and improve overall system performance. However, symbiotic job scheduling typically distributes threads evenly among cores, i.e., all cores get assigned the same number of threads, which we find to lead to sub-optimal performance. In this paper, we show that asymmetric schedules (i.e., schedules that assign a different number of threads to each SMT core) can significantly improve performance compared to symmetric schedules. To leverage this finding, we propose thread isolation, a technique that turns symmetric schedules into asymmetric ones yielding higher overall system performance. Thread isolation identifies SMT-adverse applications and schedules them in isolation on a dedicated core to mitigate their sharp performance degradation under SMT. Our experimental results on an IBM POWER8 processor show that thread isolation improves system throughput by up to 5.5 percent compared to a state-of-the-art symmetric symbiotic job scheduler., Josue Feliu has been partially supported through a postdoctoral fellowship by the Generalitat Valenciana (APOSTD/2017/052). Additional support has been provided by the Ministerio de Ciencia, Innovacion y Universidades and the European ERDF under Grant RTI2018-098156-B-C51, as well as, by the Universitat Politenica de Valencia through the "Ayudas a Primeros Proyectos de Investigacion" (PAID-06-18) under grant SP20180140. Lieven Eeckhout's research program is supported through FWO grants no. G.0434.16N and G.0144.17N, and the European Research Council (ERC) Advanced Grant agreement no. 741097.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transportation infrastructure network design in the presence of modal competition: computational complexity classification and a genetic algorithm

  • Perea Rojas Marcos, Federico
  • Menezes, Mozart B. C.
  • Mesa, Juan A.
  • Rubio-Del-Rey, Fernando
[EN] In this paper we analyze the computational complexity of transportation infrastructure network design problems, in the presence of a competing transportation mode. Some of these problems have previously been introduced in the literature. All problems studied have a common objective: the maximization of the number of travelers using the new network to be built. The differences between them are due to two factors. The first one is the constraints that the new network should satisfy: (1) budget constraint, (2) no-cycle constraint, (3) both constraints. The second factor is the topology of the network formed by the feasible links and stations: (1) a general network, (2) a forest. By combining these two factors, in total we analyze six problems, five of them are shown to be NP-hard, the sixth being trivial. Due to the NP-hardness of these problems, a genetic algorithm is proposed. Computational experiments show the applicability of this algorithm., Mozart Menezes and Juan A. Mesa were partially supported by project MTM2015- 67706-P (MINECO/FEDER,UE). Federico Perea was partially supported by the Spanish Ministry of Science, Innovation, and Universities, under projects "OPTEP-Port Terminal Operations Optimization" (No. RTI2018-094940-B-I00) and MTM2016-74983, fnanced with FEDER funds, and by the Universitat Politècnica de València under grant SP20180164 of the program Primeros Proyectos de Investigaciòn (PAID-06-18), Vicerrectorado de Investigaciòn, Innovaciòn y Transferencia. All this support is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Feasibility, safety and efficacy of transauricular vagus nerve stimulation in a cohort of patients with disorders of consciousness

  • Noé, Enrique
  • Ferri, Joan
  • Colomer, Carolina
  • Moliner, Belén
  • O&apos;Valle, Myrtha
  • Ugart, Patricia
  • Rodríguez, Clara
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
This work was supported by grant from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 778234- DoCMA project and by Conselleria de Educacion, Investigacion, Cultura y Deporte of Generalitat Valenciana (SEJI/2019/017) and Vicerrectorado de Investigacion, Innovacion y Transferencia of Universitat Politecnica de Valencia (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

El mismo motor, nuevos combustibles: Extendiendo la vida de los motores de combustión interna con e-fuels más allá de las regulaciones futuras.

  • Guzmán Mendoza, María Gabriela
[ES] A medida que los efectos del calentamiento global se hacen más severos, el estudio de alternativas para tratar de frenarlos, o incluso detenerlos, aumenta su importancia. El sector de transporte es uno de los principales contribuyentes a los insidiosos gases de efecto invernadero (GEI), y como tal este sector debe estar a la vanguardia del desarrollo de estrategias que reduzcan las emisiones globales. Por otro lado, los entes reguladores de emisiones se han vuelto más estrictos con cada nueva iteración de normativa, y actualmente, nos encontramos en la cúspide de nuevas normativas que podrían no dejar cabida para los motores de combustión interna en años posteriores al 2025. La tendencia para los vehículos ligeros es la electrificación. Sin embargo, la electrificación completa del parque automotor tomará tiempo, inversión de capital y adaptación del consumidor debido a que los vehículos eléctricos (VE) todavía presentan altos costos de producción, menos puntos de carga, un rango de distancia menor, y un tiempo de carga mayor que sus contrapartes de combustión interna. En el caso de las flotas de vehículos pesados, estas limitaciones continúan representando un impedimento para la adopción de los Ves a causa de las demandas de rentabilidad, peso y distancia requeridas. Alternativas diferentes a la conversión a eléctricos deben también ser exploradas y serán tremendamente importantes en regiones donde la red eléctrica se conforme de fuentes de generación desfavorables para el medio ambiente, se encuentre en mal estado o desarrollo, o el costo de substitución de vehículos sea prohibitivo. En tal sentido, el uso de combustibles alternativos que no contribuyan hacia los gases de efecto invernadero gana relevancia a medida que las políticas para lograr cero emisiones entran en vigor alrededor del mundo. El estudio de combustibles que puedan tener propiedades energéticas similares a las de los combustibles convencionales (diésel y gasolina), pero con menores emisiones del motor y emisiones netas de producción igual a cero, al mismo tiempo que se mantienen usables como substitutos de aplicación directa donde ni el motor ni el tren motriz deben ser modificados se convierte en un esfuerzo digno de entender a profundidad. Habiendo dicho lo anterior, el presente trabajo se enfoca al estudio de los efectos de los e-fuels como el OMEx, el metanol y el metano en motores de encendido por compresión, actuando bajo modos de combustión de baja temperatura con combustible dual, para evaluar el potencial de reducción de emisiones sin desmejorar la eficiencia y el consumo de combustible. Estrategias de calibración diferentes son utilizadas para obtener una fase de combustión optimizada. Durante el estudio se encuentra que las emisiones de especies contaminantes como el NOx y el hollín pueden ser reducidas con respecto a las contrapartes tradicionales. Otro hito importante se asocia a que, si la síntesis del combustible se realiza utilizando fuentes renovables, el CO2 (una de los principales contribuyentes a los GEI) del ciclo de vida del combustible puede ser potencialmente cero en su suma neta., [EN] As the effects of global warming become more dire, the study of alternatives to try to delay it, or even stop it, become increasingly important. The transport sector is one of the main contributors to the insidious greenhouse gases (GHG), and as such should be at the forefront of the development of strategies that reduce global emissions. On the other side, emissions regulators have become stricter with every new iteration of normative, and currently we are on the cusp of new rulings that could potentially leave no room to the use of internal combustion engines beyond 2025. The tendency for light-duty vehicles is to become electrified. However complete electrification of the automotive park will take time, capital investment and consumer adaption since electric vehicles (EV) still present higher production costs, less charging stations, a shorter range, and a longer time to replenish its energy than internal combustion vehicles. In the case of heave-duty fleets these limitations still represent a significant impediment for the adoption of EVs due to their rentability, weight and distance demands. Alternatives different to electrification should also be explored and will be tremendously important in regions where the electric grid is not comprised of mainly green sources, is not as well developed, or the cost of vehicle substitutions is prohibitive. In that sense, the use of alternative fuels that do not contribute to greenhouse gases is gaining relevance as policies to move to zero emissions come into force across the world. The study of fuels that can have similar energetic properties as conventional fuels (diesel and gasoline), but with less engine-out emissions and net-zero production emissions, while remaining usable as drop-in substitutes where neither the engine nor the drivetrain has to be modified becomes an insightful endeavor. Having said the above, the present work is dedicated to the study of the effect of e-fuels like OMEx, methanol and methane on compression ignition (CI) internal combustion engines under dual-fuel low-temperature combustion modes to assess the potential for emissions reductions while maintaining good levels of efficiency and fuel consumption. Different calibrations methodologies are applied to obtain an optimized combustion phasing. Through the study it is found that engine-out emissions of polluting species like NOx and soot can be reduced with respect to their conventional counterparts. Another important highlight is the fact that given the fuels are synthetized employing renewable sources, the CO2 (one of the main contributors to GHG) through the lifecycle of the fuel can potentially be net-zero., The authors thanks ARAMCO Overseas Company and VOLVO Group Trucks Technology for supporting this research. The authors acknowledge FEDER and Spanish Ministerio de Economía y Competitividad for partially supporting this research through TRANCO project (TRA2017- 87694-R). The authors also acknowledge the Universitat Politècnica de València for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigación (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel nickel nanoparticles stabilized by imidazolium-amidinate ligands for selective hydrogenation of alkynes

  • López-Vinasco, Angela M.
  • Martínez-Prieto, Luis Miguel
  • Asensio, Juan M.
  • Lecante, Pierre
  • Chaudret, Bruno
  • Cámpora, Juan
  • van Leeuwen, Piet W. N. M.
[EN] The main challenge in the hydrogenation of alkynes into (E)- or (Z)-alkenes is to control the selective formation of the alkene, avoiding the over-reduction to the corresponding alkane. In addition, the preparation of recoverable and reusable catalysts is of high interest. In this work, we report novel nickel nanoparticles (Ni NPs) stabilized by three different imidazolium-amidinate ligands (ICy center dot(NCN)-N-(Ar); L1: Ar = p-tol, L2: Ar = p-anisyl and L3: Ar = p-ClC6H4). The as-prepared Ni NPs were fully characterized by (HR)-TEM, XRD, WASX, XPS and VSM. The nanocatalysts are active in the hydrogenation of various substrates. They present a remarkable selectivity in the hydrogenation of alkynes towards (Z)-alkenes, particularly in the hydrogenation of 3-hexyne into (Z)-3-hexene under mild reaction conditions (room temperature, 3% mol Ni and 1 bar H-2). The catalytic behaviour of Ni NPs was influenced by the electron donor/acceptor groups (-Me, -OMe, -Cl) in the N-aryl substituents of the amidinate moiety of the ligands. Due to the magnetic character of the Ni NPs, recycling experiments were successfully performed after decantation in the presence of an external magnet, which allowed us to recover and reuse these catalysts at least 3 times preserving both activity and chemoselectivity., The authors thank CNRS, UPS-Toulouse, INSA, "IDEX/Chaires d'attractivite l'Universite Federale Toulouse Midi-Pyrenees", "Instituto de Tecnologia Quimica" (ITQ; UPV-CSIC), "Juan de la Cierva" programme (IJCI-2016-27966), "Primero Proyectos de Investigacion" (PAID-06-18), "Instituto de Investigaciones Quimicas" (IIQ; CSIC-US), "Ministerio de Ciencia, Innovacion y Universidades" (MCIU/AEI), FEDER funds of the European Union (PGC2018-095768-B-I00) and ERC Advanced Grant (MONACAT 2015-694159) for financial support. We also thank L. Datas for the TEM facilities (UMS Castaing) and S. Cayez for the HRTEM measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using a CFD analysis of the flow capacity in a twin-entry turbine to develop a simplified physics-based model

  • Galindo, José|||0000-0001-6068-182X
  • Serrano, J.R.|||0000-0003-0692-3917
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Medina-Tomás, Nicolás
[EN] The current paper presents a flow behaviour analysis of twin-entry radial turbines by means of experimental measurements and computational fluid dynamics (CFD) simulations. The experimental data were measured at partial, unequal and full admission conditions, and was used to globally validate CFD simulations. The experimental results hinted towards considering twin-entry turbines as two separated single-entry turbines working in parallel when used in simplified physics-based models such as in one-dimensional simulations. After analysing the CFD results, a simple flow capacity model was developed, exploiting some of the observed characteristic phenomena to reduce the number of fitting parameters to their minimum while keeping its accuracy and extrapolation capabilities., Nicolas Medina is partially supported through contract FPU17/02803 of Programa de Formacion de Profesorado Universitario of Spanish Ministerio de Ciencia, Innovacion y Universidades. This work has been partially supported by the "Ayuda a Primeros Proyectos de Investigacion" (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), Valencia, Spain. The authors wish to thank V. Ucedo for helping with the moulds, R. Carrascosa for his invaluable work during the experimental setup and campaign and P. Raga for his help with the setup of the CFD simulations. Finally, this work would not have been possible without the technical support of V. Lido and J. Bustos of TODO-3D, who did a magnificent job scanning the turbine in 3D.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

DVC-FISH to identify potentially pathogenic Legionella inside free-living amoebae from water sources

  • Moreno Trigos, Mª Yolanda|||0000-0003-3688-5157
  • Moreno-Mesonero, Laura|||0000-0001-9492-5562
  • García Hernández, Jorge|||0000-0003-1258-6128
[EN] Despite all safety efforts, drinking and wastewater can still be contaminated by Legionella and free-living amoebae (FLA) since these microorganisms are capable of resisting disinfection treatments. An amoebae cyst harboring pathogenic Legionella spp. can be a transporter of this organism, protecting it and enhancing its infection abilities. Therefore, the aim of this work is to identify by DVC-FISH viable Legionella spp and Legionella pneumophila cells inside FLA from water sources in a specific and rapid way with the aim of assessing the real risk of these waters. A total of 55 water samples were processed, 30 reclaimed wastewater and 25 drinking water. FLA presence was detected in 52.7% of the total processed water samples. When DVC-FISH technique was applied, the presence of viable internalized Legionella spp. cells was identified in 69.0% of the total FLA-positive samples, concretely in 70.0% and 66.7% of wastewater and drinking water samples, respectively. L. pneumophila was simultaneously identified in 48.3% of the total FLA-positive samples, specifically in 50.0% and 44.4% of wastewater and drinking water samples, respectively. By culture, potentially pathogenic Legionella cells were recovered in 27.6% of the total FLA-positive bacteria, particularly in 35.0% and 11.1% of wastewater and drinking water samples, respectively. These findings demonstrate that FLA may promote resistance of bacteria to the performed disinfection treatments for drinking as well as for wastewater. So, in addition to the risk for the presence of pathogenic FLA in water it is necessary to take into account that these can be transporters of the pathogenic bacteria Legionella, which are able to survive inside them. The DVC-FISH method described here has been proved to be a rapid and specific tool to identify pathogenic Legionella spp. and L. penumophila viable cells harboured by FLA in these water sources, posing particular public health concern., This study has been supported by First research projects funding (PAID-06-18), Vice-Rectorate for Research, Innovation and Transfer of Universitat Politècnica de València" (UPV), València, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Uniform Ru nanoparticles on N-doped graphene for selective hydrogenation of fatty acids to alcohols

  • Martínez-Prieto, Luis Miguel
  • Cerezo-Navarrete, Christian
  • CHAUDRET, B.
  • Puche Panadero, Marta|||0000-0002-9390-5532
[EN] Ruthenium nanoparticles (Ru NPs) supported on reduced-graphene oxide doped with N (NH2-rGO) was synthesized and used for the selective hydrogenation of fatty acids to alcohols, being the hydrogenation of palmitic acid selected as model. Ru was stabilized forming uniform nanometer size particles on N-doped graphene (Ru/NH2-rGO). The resultant catalyst was very selective for the carbonyl reduction giving 93% of the aliphatic alcohol at 99% conversion. The Ru/NH2-rGO catalysts was more active and selective than the corresponding Ru on non-doped graphene (Ru/rGO) or Ru on carbon (Ru/C). Mechanistic studies points to a dual mechanism for H-2 dissociation, i.e. homolytic and heterolytic cleavage exists on the Ru/NH2-rGO, while only the homolytic H-2 dissociation occurs on Ru/rGO. This heterolytic splitting, which activates the carbonyl groups and facilitates the hydrogenation of aliphatic acids, is due to the presence of basic centres next to the Ru atoms. The presence of N atoms also increases the stability of the catalyst, allowing a reuse up to four times. (C) 2019 Elsevier Inc. All rights reserved., The authors thank Institute de Tecnologia Quimica (ITQ), Consejo Superior de Investigaciones Cientificas (CSIC) and Universitat Politecnica de Valencia (UPV) for the facilities and Severo Ochoa excellence programme, "Juan de la Cierva" programme and Primeros Proyectos de Investigacion (PAID-06-18) for financial support. We gratefully acknowledge Prof. A. Corma for his invaluable contribution to this research. We also thank the Electron Microscopy Service of the UPV for TEM facilities, Jose A. Vidal-Moya (ITQ CSIC-UPV) for NMR measurements and J. Gaona and C. Morales for their assistance in catalytic reactions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Surveying Safety-relevant AI Characteristics

  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Avin, Shahar
  • Heigeartaigh, Sean O.
[EN] The current analysis in the AI safety literature usually combines a risk or safety issue (e.g., interruptibility) with a particular paradigm for an AI agent (e.g., reinforcement learning). However, there is currently no survey of safety-relevant characteristics of AI systems that may reveal neglected areas of research or suggest to developers what design choices they could make to avoid or minimise certain safety concerns. In this paper, we take a first step towards delivering such a survey, from two angles. The first features AI system characteristics that are already known to be relevant to safety concerns, including internal system characteristics, characteristics relating to the effect of the external environment on the system, and characteristics relating to the effect of the system on the target environment. The second presents a brief survey of a broad range of AI system characteristics that could prove relevant to safety research, including types of interaction, computation, integration, anticipation, supervision, modification, motivation and achievement. This survey enables further work in exploring system characteristics and design choices that affect safety concerns, FMP and JHO were supported by the EU (FEDER) and the Spanish MINECO under grant TIN 2015-69175-C4-1-R, by Generalitat Valenciana (GVA) under grant PROME-TEOII/2015/013 and by the U.S. Air Force Office of Scientific Research under award number FA9550-17-1-0287. FMP was also supported by INCIBE (Ayudas para la excelencia de los equipos de investigacion avanzada en ciberseguridad), the European Commission, JRC¿s Centre for Advanced Studies, HUMAINT project (Expert Contract CT-EX2018D335821-101), and UPV PAID-06-18 Ref. SP20180210. JHO was supported by a Salvador de Madariaga grant (PRX17/00467) from the Spanish MECD for a research stay at the Leverhulme Centre for the Future of Intelligence (CFI), Cambridge, and a BEST grant (BEST/2017/045) from GVA for another research stay also at the CFI. JHO and SOH were supported by the Future of Life Institute (FLI) grant RFP2-152. SOH was also supported by the Leverhulme Trust Research Centre Grant RC2015-067 awarded to the Leverhulme Centre for the Future of Intelligence, and a a grant from Templeton World Charity Foundation
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Evaluation of RCCI combustion using OMEx for pollutant emissions reduction, Evaluación de la combustión RCCI usando OMEx para la reducción de contaminantes

  • Fogué Robles, Álvaro
[ES] Las nuevas normativas reducirán de forma significativa los niveles aceptables de óxidos de nitrógeno (NOx) y hollín de los motores, lo que implica reducir notablemente las temperaturas alcanzadas dentro del cilindro y emplear mezclas de aire-combustible muy diluidas. A su vez, los objetivos de reducción de emisiones de CO2 propuestos también implican que el consumo total de combustible debe reducirse de forma proporcional, lo que se traduce en un aumento de la eficiencia térmica del motor. Para satisfacer ambos requisitos, mayor eficiencia y menores emisiones, la comunidad científica ha ideado lo que se conoce como modos de combustión de baja temperatura (LTC), en los que se emplean mezclas de aire y combustible altamente homogéneas para reducir las temperaturas en la cámara de combustión respecto a los modos de combustión tradicionales para así producir menos emisiones. Dentro de la amplia gama de LTC desarrollados recientemente, el modo de combustión Reactivity Controlled Compression Ignition (RCCI) ha demostrado tener cierta ventaja con respecto a otros LTC como el HCCI o el PPC, ya que permite cierta flexibilidad para controlar la tasa de combustión y así poder extender el rango operacional del motor al mismo tiempo que mantiene niveles de emisiones similares a los otros LTC. El RCCI ha sido combinado con la combustión dual-fuel en lo que se conoce como combustión DMDF (Dual-Mode Dual-Fuel), que permite extender el rango operacional del RCCI a todo el mapa motor por medio de una estrategia basada en mezclas altamente homogéneas a baja carga de motor y mezclas más estratificadas y difusivas en puntos de alta potencia. El modo de combustión DMDF utilizado con combustibles convencionales como diésel y gasolina es capaz de mantener un rendimiento y emisiones de CO2 similares a los modos de combustión convencionales y obtener una reducción en las emisiones de NOx y hollín capaz de cumplir con la normativa EU VI en condiciones de operación por debajo de cierto nivel de potencia. A pesar de esto, cuando esta tecnología se evalúa bajo condiciones de conducción realistas es capaz de cumplir con los requisitos de homologación. Pensando ya en la aplicación de este concepto, es posible contribuir también a la reducción de emisiones de CO2 mediante el uso de combustibles sintéticos que se formulan utilizando CO2 capturado directamente de la atmósfera. Dentro de estos, los combustibles altamente oxigenados como el OMEx sin enlaces carbono-carbono en la molécula tienen la habilidad de no producir hollín incluso bajo estrategias de combustión altamente difusivas. Como desventaja, estos combustibles tienden a tener una densidad energética relativamente baja y esto puede afectar a la autonomía del vehículo. Se ha demostrado que usando gasolina y OMEx bajo el modo de combustión DMDF proporciona grandes ventajas en la reducción de emisiones ya que no produce hollín en ningún punto de operación y es capaz de alcanzar niveles EU VI en emisiones de NOx en todo el mapa motor al mismo tiempo que aumenta ligeramente la eficiencia térmica (que se traduce en un menor uso de energía) y contribuye a la reducción de emisiones de CO2 WtW mientras que el impacto en la autonomía del vehículo se reduce a niveles aceptables que se pueden solventar con un ligero aumento de la capacidad del depósito. Los últimos avances en el uso de DMDF OMEx-Gasolina convierten esta alternativa en un potencial sustituto a los motores convencionales, pero aun quedan muchas preguntas sin responder con respecto a la aplicabilidad de este concepto. En un intento de aclarar algunas de estas cuestiones, este trabajo evalúa el impacto del uso de combustibles de baja densidad energética en el sistema de inyección y estudia la capacidad de la tecnología actual para adaptarse al nuevo escenario. Además, como se espera un aumento en la exigencia de la normativa de homologación en los próximos años, este trabajo también, [EN] The projected future for internal combustion engines supposes a great challenge in terms of controlling the combustion products. Future normative will significantly reduce the accepted pollutants levels like nitrogen oxides (NOx) and soot, which requires to significantly reduce the in-cylinder temperatures and use highly diluted fuel to air mixtures. In addition, the objectives for greenhouse gasses reduction like CO2 imply that the total fuel consumption must be reduced proportionally, which means that the engine thermal efficiency has to be improved. To comply with both requirements of high thermal efficiency and low emission levels, the scientific community has devised what is known as low temperature combustion modes (LTC), in which highly homogeneous fuel-air mixtures produce lower in-cylinder temperatures compared to conventional combustion modes and significantly reduce the pollutant emissions. Within the family of the recently developed LTC, the RCCI (Reactivity-Controlled Compression Ignition) combustion mode has demonstrated to have a significant advantage with respect to other LTC like HCCI and PPC, as it allows certain flexibility to better control the combustion rates and extend the operational limits of the engine while keeping similar emission properties. The combination of dual-fuel combustion with RCCI is known as DMDF (Dual-Mode Dual-Fuel) combustion, which provides the capability to extend the operational range of RCCI to the complete engine map by designing a strategy in which a highly mixed load is used at low engine loads and a more diffusive and stratified combustion is employed at higher engine loads. The DMDF used with conventional fuels like diesel as a high reactivity fuel and gasoline as the low reactivity fuel can provide similar engine efficiency and CO2 emissions than conventional combustion modes, but NOx and soot reduction is only able to fulfil current EU VI normative up to a certain engine power level. Nonetheless, when it is evaluated under realistic driving conditions it can comply with homologation scenarios. Looking further in the application of this concept, it is possible to contribute to the CO2 reduction by using synthetic fuels that have been produced using CO2 present in the atmosphere as a raw material. Synthetic fuels also have the advantage of having a molecular structure that can be designed and tuned by different refining processes obtaining certain chemical properties that can be beneficial for the emissions reduction. Specifically, highly oxygenated fuels like OMEx with no carbon-carbon molecular bonds have the capability of not producing soot even at highly diffusive combustion strategies. The main drawback of synthetic oxygenated fuels is that they normally have a much lower energy density and can significantly impact the vehicle autonomy. It has been proven that DMDF combustion strategy using gasoline and OMEx provides a huge impact on NOx and soot reduction being able to fulfil normative levels in all the engine map, improve the engine thermal efficiency (which directly implies a reduction of the energy consumption) and contribute to the CO2 reduction in well-to-wheel (WtW) terms while having an acceptable impact in the autonomy of the vehicle that can be easily managed with a slightly bigger fuel tank volume. The latest results with this OMEx-Gasoline DMDF engines make of this alternative a potential substitute for conventional ICEs, but there still are many questions to be answered regarding the applicability of such technology. As an attempt to bring light over some of these questions, this work has evaluated the impact of using low energy density fuels on the injection system and evaluate the feasibility of current technological solutions to be adapted to this new scenario. Additionally, as it is expected that the current homologation normative will be updated to a more restrictive criteria in the future years, in this work it has also been evaluated the possibili, The authors thanks VOLVO Group Trucks Technology and ARAMCO Overseas Company for supporting this research. The authors also acknowledge FEDER and Spanish Ministerio de Economía y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R) and the Universitat Politècnica de València for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigación (PAID-06-18). The authors acknowledge the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana for partially supporting this research through grant number GV/2020/017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effectiveness of hybrid powertrains to reduce the fuel consumption and NOx emissions of a Euro 6d-temp diesel engine under real-life driving conditions

  • Luján, José M.|||0000-0001-6133-8943
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Martínez-Boggio, Santiago
[EN] Recent investigations demonstrated that the real-world driving conditions differ from those proposed in the homologation cycles. This provokes that the emissions levels in real-life conditions exceed the normative values, as shown in the recent scandal related to the NOx emissions from the passenger cars equipped with diesel engines. On the other hand, the upcoming emissions regulations will limit the CO2 emissions to very low levels, which demands a further optimization of the existing technology. One way to reduce the NOx and CO2 emissions is by electrifying the powertrain in a certain degree. The objective of this work is to evaluate the potential of implementing a parallel (P2) hybrid architecture in a compact car (class C) equipped with a diesel 1.6 Euro 6d-temp engine to reduce the emissions and fuel consumption in homologation and real-life driving cycles. This has been done using a OD numerical vehicle model and the experimental engine maps of fuel consumption and emissions measured at steady state conditions. After that, the transient conditions were simulated in homologation cycles and real-life driving cycles measured by the authors in Spain. The numerical model was validated against experimental tests carried out in an active engine test bench, evidencing differences below 4% under the worldwide harmonized light vehicles test cycle (WLTC). In the real-life cycles, the hybridization of the powertrains improves the fuel consumption for all types of driving cycles (urban, combined and highway). The major benefits are obtained in urban driving cycles, with gains up to 50% in fuel consumption and CO2 emissions. In addition, the improvements in real-life conditions are higher than in the urban phase of the homologation cycles. On the contrary, combined real-life cycles (urban + rural + highway) show lower benefits than the homologation cycle. This is due to different energy management strategy that needs to be adapted to each driving situation. Lastly, it was found that, contrarily to the case of the homologation cycle, the NOx emissions are not reduced with the hybridization of the diesel powertrain in real-life conditions. Thus, to achieve 2021 CO2 target (95 g/km) and to reduce aftertreatment systems in diesel engines, other vehicles technologies need to be added to the full hybridization., The authors acknowledge FEDER and Spanish Ministerio de Economia y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R). The authors also acknowledge the Universitat Politecnica de Valencia for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigacion (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dual Indicators to Analyse AI Benchmarks: Difficulty, Discrimination, Ability and Generality

  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Hernández-Orallo, José|||0000-0001-9746-7632
[EN] With the purpose of better analyzing the result of artificial intelligence (AI) benchmarks, we present two indicators on the side of the AI problems, difficulty and discrimination, and two indicators on the side of the AI systems, ability and generality. The first three are adapted from psychometric models in item response theory (IRT), whereas generality is defined as a new metric that evaluates whether an agent is consistently good at easy problems and bad at difficult ones. We illustrate how these key indicators give us more insight on the results of two popular benchmarks in AI, the Arcade Learning Environment (Atari 2600 games) and the General Video Game AI competition, and we include some guidelines to estimate and interpret these indicators for other AI benchmarks and competitions., This work was supported by the U.S. Air Force Office of Scientific Research under Award FA9550-17-1-0287; in part by the EU (FEDER) and the Spanish MINECO under Grant TIN 2015-69175-C4-1-R; and in part by the Generalitat Valenciana PROMETEOII/2015/013. The work of F. Mart ' inez-Plumed was supported by INCIBE (Ayudas para la excelencia de los equipos de investigaci ' on avanzada en ciberseguridad), the European Commission, JRC's Centre for Advanced Studies, HUMAINT project (Expert Contract CT-EX2018D335821-101), and UPV PAID-06-18 Ref. SP20180210. The work of J. Hern ' andez-Orallo was supported in part by Salvador de Madariaga grant (PRX17/00467) from the Spanish MECD, in part by the BEST Grant (BEST/2017/045) from the GVA for research stays at the CFI, and in part by the FLI grant RFP2-152.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Genetic parameters of drought tolerance for agromorphological traits in eggplant, wild relatives, and interspecific hybrids

  • Kouassi, Abou Bakari
  • Kouassi, Koffi Brice Aymar
  • Sylla, Zakaria
  • Fonseka, Ramya Malkanthi
  • Kouassi, Auguste
  • Fonseka, Hemal
  • N&apos;Guetta, Assanvo Simon-Pierre
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
[EN] Crop wild relatives (CWRs) have barely been used in eggplant (Solanum melongena) breeding. However, introgression breeding may help in coping with the challenges posed by climate change. During the rainy and dry seasons, we evaluated nine accessions of eggplant, nine accessions of seven related species (of which six are CWRs and one is a cultivated relative), and 12 interspecific hybrids. Drought tolerance scores, calculated as ratios of growing rates and ratios of mean values during the rainy and dry seasons, were obtained for vegetative growth and yield-related traits. Considering the vegetative growth and yield-related traits evaluated, the F-1 hybrid progenies of eggplant with S. insanum MEL1 x INS2 and MEL4 x INS3, S. anguivi MEL6 x ANG1, and S. dasyphyllum MEL6 x DAS1, plus the S. sysimbriifolium accession SIS1, displayed drought tolerance. Small to large gaps were observed between phenotypic and genotypic CVs of drought tolerance scores, reflecting variable influence of environmental factors on drought tolerance of the traits evaluated. In addition, the narrow-sense heritability was generally moderate, indicating that genes with dominance and/or epistasis effects may be involved in the expression of drought tolerance. High genotypic correlations for drought tolerance scores between pairs of traits such as branching index and leaf length, leaf petiole diameter and plant height, number of stamens per flower, and fruit pedicel length suggest that drought tolerance of these traits is controlled by genes that are in linkage disequilibrium and/or have pleiotropic effects. The results are relevant for the development of drought-tolerant cultivars of eggplant., Universitat Politecnica de Valencia, Grant/Award Number: PAID06-18; Ministerio de Ciencia e Innovacion, Grant/Award Number: RTI-2018-094592-B-I00; Generalitat Valenciana, Grant/Award Number: APOSTD/2018/014; Global Crop Diversity Trust, Grant/Award Number: GS20001 This work was undertaken as part of the initiative ¿Adapting Agriculture to Climate Change: Collecting, Protecting and Preparing Crop Wild Relatives,¿ which is supported by the Government of Norway. The project is managed by the Global Crop Diversity Trust with the Millennium Seed Bank of the Royal Botanic Gardens, Kew, and implemented in partnership with national and international gene banks and plant breeding institutes around the world. For further information, see the project website: http://www.cwrdiversity.org/. Funding was also received from Ministerio de Ciencia, Innovación y Universidades, Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (Grant RTI-2018-094592-B-I00 from MCIU/AEI/FEDER, UE) and from Vicerrectorado de Investigación, Innovación y Transferencia de la Universitat Politecnica de Valencia (Ayuda a Primeros Proyectos de Investigación; PAID-06-18), Mariola Plazas is grateful to Generalitat Valenciana and Fondo Social Europeo for a postdoctoral contract (APOSTD/2018/014).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Robust Adiabatic Model for a Quasi-Steady Prediction of Far-Off Non-Measured Performance in Vaneless Twin-Entry or Dual-Volute Radial Turbines

  • Serrano, J.R.|||0000-0003-0692-3917
  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Samala, Vishnu
[EN] The current investigation describes in detail a mass flow oriented model for extrapolation of reduced mass flow and adiabatic efficiency of double entry radial inflow turbines under any unequal and partial flow admission conditions. The model is based on a novel approach, which proposes assimilating double entry turbines to two variable geometry turbines (VGTs) using the mass flow ratio ( MFR ) between the two entries as the discriminating parameter. With such an innovative approach, the model can extrapolate performance parameters to non-measured MFR s, blade-to-jet speed ratios, and reduced speeds. Therefore, the model can be used in a quasi-steady method for predicting double entry turbines performance instantaneously. The model was validated against a dataset from two different double entry turbine types: a twin-entry symmetrical turbine and a dual-volute asymmetrical turbine. Both were tested under steady flow conditions. The proposed model showed accurate results and a coherent set of fitting parameters with physical meaning, as discussed in this paper. The obtained parameters showed very similar figures for the aforementioned turbine types, which allows concluding that they are an adequate set of values for initializing the fitting procedure of any type of double entry radial turbine., Vishnu Samala is partially supported through contract FPI-2017-S2-1256 of Programa de Apoyo para la Investigacion y Desarrollo (PAID) of Universitat Politecnica de Valencia. This work was partially funded by the 'Ayuda a Primeros Proyectos de Investigacion' (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

GRASP algorithm for the unrelated parallel machine scheduling problem with setup times and additional resources

  • Yepes-Borrero, Juan C.
  • Perea Rojas Marcos, Federico
  • Caballero-Villalobos, Juan Pablo
  • Villa Juliá, Mª Fulgencia|||0000-0003-0019-8777
[EN] This paper provides practitioners with new approaches for solving realistic scheduling problems that consider additional resources, which can be implemented on expert and intelligent systems and help decision making in realistic settings. More specifically, we study the unrelated parallel machine scheduling problem with setup times and additional limited resources in the setups (UPMSR-S), with makespan minimization criterion. This is a more realistic extension of the traditional problem, in which the setups are assumed to be done without using additional resources (e.g. workers). We propose three metaheuristics following two approaches: a first approach that ignores the information about additional resources in the constructive phase, and a second approach that takes into account this information about the resources. Computational experiments are carried out over a benchmark of small and large instances. After the computational analysis we conclude that the second approach shows an excellent performance, overcoming the first approach., The first three authors would like to acknowledge the support from Spanish "Ministerio de Economia y competitividad" throughout grant number MTM2016-74983 and grant "SCHEYARD - Optimization of Scheduling Problems in Container Yards" (No. DPI2015-65895-R), financed by FEDER funds, the support from "Ministerio de Ciencia, Innovacion y Universidades" under grant "Optimizacion de Operaciones en Terminales Portuarias (OPTEP)" (No.RTI2018-094940-B-100). Thanks are also due to the Universitat Politecnica de Valencia under grant SP20180164 of the program Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia. Juan C. Yepes-Borrero acknowledges financial support by the El Instituto Colombiano de Credit Educativo y Estudios Tecnicos en el Exterior - ICETEX under program Pasaporte a la ciencia - Doctorado. Special thanks are due to two anonymous referees for their valuable comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Physiological and Biochemical Responses to Salt Stress in Cultivated Eggplant (Solanum melongena L.) and in S. insanum L., a Close Wild Relative

  • Brenes, Marco
  • Solana, Andrea
  • Calatayud, Ángeles
  • Boscaiu, Monica|||0000-0002-9691-4223
  • Fita, Ana|||0000-0002-8637-5852
  • Vicente, Oscar|||0000-0001-5076-3784
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
[EN] Eggplant (Solanum melongena) has been described as moderately sensitive to salinity. We characterised the responses to salt stress of eggplant andS. insanum, its putative wild ancestor. Young plants of two accessions of both species were watered for 25 days with an irrigation solution containing NaCl at concentrations of 0 (control), 50, 100, 200, and 300 mM. Plant growth, photosynthetic activity, concentrations of photosynthetic pigments, K+, Na+, and Cl(-)ions, proline, total soluble sugars, malondialdehyde, total phenolics, and total flavonoids, as well as superoxide dismutase, catalase, and glutathione reductase specific activities, were quantified. Salt stress-induced reduction of growth was greater inS. melongenathan inS. insanum.The photosynthetic activity decreased in both species, except for substomatal CO2 concentration (Ci) inS. insanum, although the photosynthetic pigments were not degraded in the presence of NaCl. The levels of Na+ and Cl(-)increased in roots and leaves with increasing NaCl doses, but leaf K(+)concentrations were maintained, indicating a relative stress tolerance in the two accessions, which also did not seem to suffer a remarkable degree of salt-induced oxidative stress. Our results suggest that the higher salt tolerance ofS. insanummostly lies in its ability to accumulate higher concentrations of proline and, to a lesser extent, Na(+)and Cl-. The results obtained indicate thatS. insanumis a good candidate for improving salt tolerance in eggplant through breeding and introgression programmes., This work was undertaken as part of the initiative "Adapting Agriculture to Climate Change: Collecting, Protecting and Preparing CropWild Relatives", which is supported by the Government of Norway and managed by the Global Crop Diversity Trust. For further information, see the project website: http://cwrdiversity.org/. Funding was also received from Ministerio de Ciencia, Innovacion y Universidades, Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional (grant RTI-2018-094592-B-100 from MCIU/AEI/FEDER, UE), European Union's Horizon 2020 Research and Innovation Programme under grant agreement No. 677379 (Linking genetic resources, genomes, and phenotypes of Solanaceous crops; G2P-SOL) and Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (Ayuda a Primeros Proyectos de Investigacion; PAID-06-18). Mariola Plazas is grateful to Generalitat Valenciana and Fondo Social Europeo for a post-doctoral grant (APOSTD/2018/014). Marco Brenes is indebted to the Faculty of Biology of the Costa Rica Institute of Technology for partially supporting his stay in Valencia ("Fondo Solidario y Desarrollo Estudiantil").
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Study of the Influence of Gasoline-Diesel Blends on the Combustion Process and Soot Formation under Diesel Engine-Like Conditions

  • Pastor, José V.|||0000-0003-4113-4681
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Micó, Carlos|||0000-0001-5787-6212
  • Garcia-Carrero, Alba Andreina
[EN] Recent research has demonstrated that a reduction in pollutant emissions of diesel engines can be achieved by using high octane fuels such as gasoline, methane, or liquefied petroleum gas. Therefore, in this study, the focus was to investigate the influence of blends of diesel and gasoline on combustion characteristics such as ignition delay, rate of heat release, and lift-off length as well as the influence on soot formation. The experiments were carried out in a test rig with optical access which mimics a single-cylinder diesel engine. Four blends were tested: one blend with 100% diesel and then three diesel-gasoline blends with 30%, 50%, and70% gasoline. The blends were made in volumetric proportions and injected using a common rail injection system without any kind of modification. The ignition delay and the apparent heat release were obtained by means of the in-cylinder pressure signal. Furthermore, the combustion development and soot formation were studied using three optical techniques: OH* chemiluminescence, natural luminosity, and diffused back-illumination extinction imaging (DBI). Different engine operating conditions were analyzed. Results showed that ID increases with the gasoline content in the blend. Similarly, as the reacting time increased, the lift-off length was longer. On the other hand, the apparent rate of heat release decreased due to a reduction of the fuel injection rate, which depends on the density of the blend. In addition, differences in the flame radiation were also observed. Gasoline-diesel blends had less luminosity, which is related to less soot formation. To confirm this, the KL factor obtained from the DBI technique was determined, and it was concluded that increasing the gasoline fraction in the blend reduces soot formation., This research work has been partly funded by the Government of Spain and FEDER under TRANCO project (TRA2017-87694-R) and by Universitat Politecnica de Valencia through the Programa de Ayudas de Investigacion y Desarrollo (PAID-01-18 and PAID-06-18) program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Item response theory in AI: Analysing machine learning classifiers at the instance level

  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Prudencio, Ricardo
  • Martínez-Usó, Adolfo
[EN] AI systems are usually evaluated on a range of problem instances and compared to other AI systems that use different strategies. These instances are rarely independent. Machine learning, and supervised learning in particular, is a very good example of this. Given a machine learning model, its behaviour for a single instance cannot be understood in isolation but rather in relation to the rest of the data distribution or dataset. In a dual way, the results of one machine learning model for an instance can be analysed in comparison to other models. While this analysis is relative to a population or distribution of models, it can give much more insight than an isolated analysis. Item response theory (IRT) combines this duality between items and respondents to extract latent variables of the items (such as discrimination or difficulty) and the respondents (such as ability). IRT can be adapted to the analysis of machine learning experiments (and by extension to any other artificial intelligence experiments). In this paper, we see that IRT suits classification tasks perfectly, where instances correspond to items and classifiers correspond to respondents. We perform a series of experiments with a range of datasets and classification methods to fully understand what the IRT parameters such as discrimination, difficulty and guessing mean for classification instances (and their relation to instance hardness measures) and how the estimated classifier ability can be used to compare classifier performance in a different way through classifier characteristic curves., This work has been partially supported by the EU (FEDER) and the Ministerio de Economia y Competitividad (MINECO) in Spain grant TIN2015-69175-C4-1-R, the Air Force Office of Scientific Research under award number FA9550-17-1-0287, and the REFRAME project, granted by the European Coordinated Research on Long-term Challenges in Information and Communication Sciences Technologies ERA-Net (CHIST-ERA) and funded by Ministerio de Economia y Competitividad (MINECO) in Spain (PCIN-2013-037), and by Generalitat Valenciana PROMETEOII/2015/013. Fernando Martinez-Plumed was also supported by INCIBE (INCIBEI-2015-27345) "Ayudas para la excelencia de los equipos de investigacion avanzada en ciberseguridad", the European Commission (Joint Research Centre) HUMAINT project (Expert Contract CT-EX2018D335821-101), and Universitat Politecnica de Valencia (PAID-06-18 Ref. SP20180210). Ricardo Prudencio was financially supported by CNPq (Brazilian Agency). Jose Hernandez-Orallo was supported by a Salvador de Madariaga grant (PRX17/00467) from the Spanish MECD for a research stay at the Leverhulme Centre for the Future of Intelligence (CFI), Cambridge, a BEST grant (BEST/2017/045) from the Valencia GVA for another research stay also at the CFI, and an FLI grant RFP2.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of Parapets on Wave Overtopping on Mound Breakwaters with Crown Walls

  • Molines, Jorge|||0000-0001-7850-0759
  • Bayón, Arnau|||0000-0001-5007-0208
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] Background literature on the influence of parapets on the overtopping of mound breakwaters is limited. In this study, numerical tests were conducted using computational fluid dynamics (CFD) to analyze the influence of nine crown wall geometries (seven with parapets). The CFD model was implemented in OpenFOAM((R)) and successfully validated with laboratory tests. A new estimator of the dimensionless mean wave-overtopping discharges (logQ) on structures with parapets is proposed. The new estimator depends on the estimation of logQ of the same structure without a parapet. The effects on wave overtopping of the parapet angle (epsilon(p)), parapet width (w(p)), and parapet height (h(p)) were analyzed. Low values of epsilon(p) and w(p)/h(p) approximate to 1 produced the highest parapet effectiveness to reduce the mean wave-overtopping discharges., This research was funded by Universitat Politecnica de Valencia (Grant SP20180111, Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia). The authors are grateful for financial support from European FEDER and Spanish Ministerio de Economía y Competitividad (Grant RTI2018-101073-B-I00), SATO (OHL Group). The authors acknowledge the support provided by the postdoctoral company internship program AEST granted to Jorge Molines by Generalitat Valenciana (Grant AEST/2019/004) and by the postdoctoral program APOSTD granted to Arnau Bayon by Generalitat Valenciana (Grant APOSTD/2019/100).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computational optimization of the piston bowl geometry for the different combustión regimes of the dual-mode dual-fuel (DMDF) concept through an improved genetic algorithm

  • Xu, Guangfu
  • Jia, Ming
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
[EN] Focusing on the dual-mode dual-fuel (DMDF) combustion concept, a combined optimization of the piston bowl geometry with the fuel injection strategy was conducted at various loads. An improved genetic algorithm was introduced in this study, which is superior in searching for the global optimal solutions. The optimal piston bowl shape coupled with the corresponding injection strategy was summarized at the various loads. The results show that the piston bowl geometry optimization can further improve the thermal efficiency with 1.4%, 4.4%, and 1.4% percentage points for the low, mid, and high loads, respectively. An indicated thermal efficiency up to 51.8% can be realized at mid load. Meanwhile, for all the optimal cases, NOx and soot emissions can meet the Euro VI limits. At low and mid loads, both the open and re-entrant type piston bowl can be equipped, while the high load only prefers the open type piston bowl for the DMDF mode. The re-entrant type or deep piston bowls are superior in organizing strong in-cylinder flow, which is beneficial for the fuel/air mixing. The open type or shallow piston bowls are helpful for reducing the heat transfer losses owing to the less heat transfer surface area. Furthermore, a correlation analysis was conducted to investigate the sensitivity of engine performance to the piston geometric parameters and injection parameters. It is concluded that the fuel injection event becomes more important for managing the engine performance as load increases. Among the injection parameters, the influence of the fuel injection timings and injection pressure on engine performance is more obvious. The piston geometric parameters play more significant roles in the heat transfer losses than the injection parameters for all loads. Among the geometric parameters, the most influential parameters are the width and open extent of the piston bowl. The heat transfer loss energy fraction can be well decreased with a wider and more open piston bowl., This work was partially supported by the National Natural Science Foundation of China (Grant Nos. 51961135105 and 91641117) and Postdoctoral Research Foundation of China (Grant Nos. 2019M661094 and 2020T130075). The experimental results used in this investigation were obtained in a project funded by VOLVO Group Trucks Technology. The authors also acknowledge FEDER and Spanish Ministerio de Economia y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R) and the Universitat Politecnica de Val`encia for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigacion (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cobalt Metal-Organic Framework Based on Layered Double Nanosheets for Enhanced Electrocatalytic Water Oxidation in Neutral Media

  • Gutiérrez-Tarriño, Silvia
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Olloqui-Sariego, José Luis
  • Calvente, Juan José
  • Minguez Espallargas, Guillermo
Programs Severo Ochoa SEV-2016-0683 and María de Maeztu CEX2019-000919-M are gratefully acknowledged. S.G.-T. thanks the MINECO for her FPU Ph.D. contract FPU16/02117. P.O.-B. and G.M.E. thank MICCIN for their Ramón y Cajal contracts RYC-2014-16620 and RYC-2013-14386. The authors acknowledge the financial support by the Spanish Government (RTI2018-096399-A-I00, RTI2018-101784-BI00, CTQ2017-89528-P, and CTQ2014-52641-P) and Generalitat Valenciana (PROMETEU/2019/066). In addition, P.O.-B. thanks UPV for his grant PAID-06-18/SP20180172. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stainless Steel Voltammetric Sensor to Monitor Variations in Oxygen and Humidity Availability in Reinforcement Concrete Structures

  • Martínez-Ibernón, Ana|||0000-0003-2136-5650
  • Lliso-Ferrando, Josep Ramon|||0000-0002-2457-9024
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
  • Soto Camino, Juan
[EN] The present work presents the results obtained with a stainless steel (SS) voltammetric sensor to detect variations in humidity (H2O) and oxygen (O2) availability in concretes. First, studies in solution were run by preparing several solutions to represent the different conditions that can be found in concrete pores. Second, the sensor's response was studied by varying O2 availability by argon or synthetic air bubbling. Then concrete conditions with different degrees of carbonation were simulated using solutions with a pH between 13 and 8.45. After characterization in solution, a study by means of concrete samples with several water/cement ratios (0.6, 0.5 and 0.4) was performed, in which sensors were embedded and studied under different O2 and H2O saturation conditions. The obtained results revealed that with the voltagram, it is possible to evaluate O2 availability variation from the slopes of the lines identified logarithmically in the voltagram for the obtained cathodic sweeping. All the results obtained with the sensor were correlated/validated by standard assays to characterize porosity in hardened concretes., The authors would like to express their gratitude to the Spanish Ministry of Science and Innovation for the pre-doctoral scholarship granted to Ana Martinez Ibernon (FPU 16/00723). To the Universitat Politecnica de Valencia for the financial support in the project "Ayudas a Primeros Proyectos de Investigacion (PAID-06-18): Lengua Electronica Voltametrica para el control de durabilidad en hormigones, SP20180245"
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of the parallel and mild hybrid vehicle platforms operating under conventional and advanced combustion modes

  • Benajes, Jesús|||0000-0002-1653-9188
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Martínez-Boggio, Santiago
[EN] The stringent regulations, increased global temperature and customer demand for high fuel economy have led to rapid developments of different alternative propulsion solutions in the last decade, with special attention to the electrified vehicles. The combination of electric machines with conventional powertrains allows to diversify the powertrain architectures. In addition, alternative combustion modes as reactivity controlled compression ignition (RCCI) have been shown to provide simultaneous ultra-low NOx and soot emissions with similar or better thermal efficiency than conventional diesel combustion (CDC). Therefore, the combination of both technologies creates a promising horizon to be implemented in commercial vehicles of the near future. In this work, experimental and numerical simulations were combined to study the potential of the parallel full hybrid electric vehicle (P2-FHEV) and mild hybrid vehicle (MHEV) to obtain lower fuel consumption and NOx emissions than a conventional powertrain in the Worldwide Harmonized Light Vehicles Cycle (WLTC). The hybrid vehicles are simulated with both CDC and diesel-gasoline RCCI combustion engines as power source. Each powertrain was optimized in terms of components (battery, electric motors...) capacity, internal combustion engine operative points, energy management strategy and gear ratios. The results show a significant fuel consumption reduction as the complexity of the hybrid system increases. The parallel architecture, which represents the most complex hybrid system tested in this work, allows obtaining a fuel consumption reduction of around 20% as compared to CDC. The dual-mode CDC-RCCI concept showed improvements in NOx and soot emissions with comparable values in terms of energy consumption and CO2 emissions than CDC. Additionally, the mild hybrid technology with the functionality of start-stop, torque assist and regenerative braking showed an acceptable balance between complexity and fuel consumption gain., The authors want to express their gratitude to General Motors Global Research & Development for providing the engine used to acquire the experimental data used in this investigation. The authors acknowledge FEDER and Spanish Ministerio de Economia y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R). The authors also acknowledge the Universitat Politecnica de Valencia for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigation (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Potential of a Two-Stage Variable Compression Ratio Downsized Spark Ignition Engine for Passenger Cars under different driving conditions

  • López, J. Javier|||0000-0002-9486-2511
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Vielmo-Cogo, Vitor
  • Wittek, Karsten
[EN] With the aim of reducing pollutant emissions from internal combustion engines (ICE), the application of stoichiometrically operated spark ignition (SI) engines, for light-duty vehicles, has been overcoming the compression ignition (CI) engines market share throughout the past years. The ability of a substantial reduction of the primary harmful emissions (HC, CO, and NOx) through the use of the simple three-way catalyst (TWC) is the main reason for that. Nonetheless, with increasing attention to CO2 emissions, the development of highly efficient downsized SI engines turn to be of enormous interest. The synergies of multiple systems such as direct injection, turbocharger, and variable valve actuation are able to lead the SI efficiencies closer to those of CI engines. However, to enable high load operation on such downsized engines, the compression ratio (CR) must be reduced due to knock limitations, reducing the partial-load operations efficiency. The implementation of two-stage variable compression ratio (VCR) systems enables the extraction of high thermal efficiency with high CR at lower loads and extended knock-free high load operation with low CR. In this study, the evaluation of a two-stage VCR system applied to a state-of-the-art downsized SI engine was made through standard driving cycle simulations. The VCR mechanism is composed of an eccentric element in the small end of the connecting rod, which is rotated to increase/decrease the effective connecting rod length, achieving the CRs of 12.11:1 and 9.56:1. The engine was run in an eddy-current dynamometer test bench throughout the essential operating range to obtain the brake specific fuel consumption (BSFC) map. The VCR mechanism CR switching delay was also experimentally characterized to derive a function of the operating conditions. The measured map was entered into the map-based driving cycle simulation with a sub-model to account for the isolated effects of the transient period encompassing the compression ratio switching. The results show that slow CR transitions lead to fuel consumption penalties, which suggests the need for optimizing the control strategies of the VCR system. Even though this penalty, once the gear up-shift speed is optimized for each driving cycle, the VCR system still enables fuel consumption reductions up to 3% on the WLTC driving cycle, up to 4% on the proposed urban driving cycles and up to 3% on highway driving cycles with respect to the fixed CR., This research has been partially funded by FEDER and the Spanish Government through project RTI2018-102025-B-I00. The authors also acknowledge the Universitat Politecnica de Valencia for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Lnvestigacion (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fault Modeling of Graphene Nanoribbon FET Logic Circuits

  • Gil Tomás, Daniel Antonio|||0000-0001-9225-1998
  • Gracia-Morán, Joaquín|||0000-0001-9715-8960
  • Saiz-Adalid, Luis-J.|||0000-0002-4868-2050
  • Gil, Pedro|||0000-0002-9364-7385
[EN] Due to the increasing defect rates in highly scaled complementary metal-oxide-semiconductor (CMOS) devices, and the emergence of alternative nanotechnology devices, reliability challenges are of growing importance. Understanding and controlling the fault mechanisms associated with new materials and structures for both transistors and interconnection is a key issue in novel nanodevices. The graphene nanoribbon field-effect transistor (GNR FET) has revealed itself as a promising technology to design emerging research logic circuits, because of its outstanding potential speed and power properties. This work presents a study of fault causes, mechanisms, and models at the device level, as well as their impact on logic circuits based on GNR FETs. From a literature review of fault causes and mechanisms, fault propagation was analyzed, and fault models were derived for device and logic circuit levels. This study may be helpful for the prevention of faults in the design process of graphene nanodevices. In addition, it can help in the design and evaluation of defect- and fault-tolerant nanoarchitectures based on graphene circuits. Results are compared with other emerging devices, such as carbon nanotube (CNT) FET and nanowire (NW) FET., This work was supported in part by the Spanish Government under the research project TIN2016-81075-R and by Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), under the project 200190032.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Emissions reduction from passenger cars with RCCI plug-in hybrid electric vehicle technology

  • Benajes, Jesús|||0000-0002-1653-9188
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Martínez-Boggio, Santiago Daniel
[EN] Hybrid Electric Vehicles (HEVs) can be considered as a potential technology to promote the change from conventional mobility to e-mobility. However, the real benefits in terms of CO2 emissions depend on a great extent on their mode of use, vehicle design and electricity source. On the other hand, in the last few years, advanced combustion modes as Reactivity Controlled Compression Ignition (RCCI) showed great advantages in terms of NOx and soot emissions reduction. This paper has the purpose of assessing, through numerical simulations fed with experimental results, the potential of different hybrid vehicles when used together with a low temperature combustion mode. In particular, the dual-fuel Mild (MHEV), Full (FHEV) and Plug-in (PHEV) hybrid electric vehicles are tested and compared to the original equipment manufacturer (OEM) and the conventional dual-fuel powertrain, both no-Hybrid vehicles. The powertrains are optimized to meet the current European homologation legislation Worldwide Harmonized Light Vehicle Test Procedure (WLTP). After that, a deep analysis is performed in terms of performance and emissions. Lastly, a life-cycle analysis (LCA) is performed to evaluate the real potential of the different technologies. The results show that the PHEV has the highest benefits in terms of fuel consumption and engine-out emissions. With this technology, it is possible to achieve the 50 g/km CO2 target for the PHEVs with a medium battery size (15 kWh), while NOx and soot levels are under the Euro 6 limits. In addition, the RCCI technology shows great benefits to achieve the Euro 6 soot level for the other hybrid platforms. The LCA shows that the PHEVs can achieve 12% reduction of the total CO2 with respect to the FHEVs, and 30% with respect to the no-hybrid diesel platform., The authors acknowledge FEDER and Spanish Ministerio de Economia y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R). The authors also acknowledge the Universitat Politecnica de Valencia for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigacion (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On Bernoulli Matrix Polynomials and Matrix Exponential Approximation

  • Defez Candel, Emilio|||0000-0002-3303-6371
  • Ibáñez González, Jacinto Javier|||0000-0002-6912-4453
  • Alonso-Jordá, Pedro|||0000-0002-6882-6592
  • Alonso Abalos, José Miguel|||0000-0001-6812-7364
  • Peinado Pinilla, Jesús|||0000-0002-9048-5106
[EN] We present in this paper a new method based on Bernoulli matrix polynomials to approximate the exponential of a matrix. The developed method has given rise to two new algorithms whose efficiency and precision are compared to the most efficient implementations that currently exist. For that, a state-of-the-art test matrix battery, that allows deeply exploring the highlights and downsides of each method, has been used. Since the new algorithms proposed here do make an intensive use of matrix products, we also provide a GPUs-based implementation that allows to achieve a high performance thanks to the optimal implementation of matrix multiplication available on these devices. (c) 2020 Elsevier B.V. All rights reserved, This work has been partially supported by Spanish Ministerio de Economia y Competitividad and European Regional Development Fund (ERDF) grants TIN2017-89314-P and by the Programa de Apoyo a la Investigacion y Desarrollo 2018 of the Universitat Politecnica de Valencia (PAID-06-18) grants SP20180016.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative Studies on the Physiological and Biochemical Responses to Salt Stress of Eggplant (Solanum melongena) and Its Rootstock S. torvum

  • Brenes, Marco
  • Pérez, Jason
  • González-Orenga, Sara
  • Solana, Andrea
  • Boscaiu, Monica|||0000-0002-9691-4223
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Fita, Ana|||0000-0002-8637-5852
  • Vicente, Oscar|||0000-0001-5076-3784
[EN] This study investigated the physiological and biochemical responses to salinity stress of Solanum melongena and its wild relative, Solanum torvum, commonly used as eggplant rootstock. Young plants of both species were watered during 25 days with NaCl aqueous solutions at the following four final concentrations: 0 (for the controls), 100, 200, and 300 mM. Plant growth parameters, photosynthetic pigments content, monovalent ion concentrations in roots and leaves, leaf levels of osmolytes (proline and total soluble sugars), oxidative stress markers (MDA and H2O2), non-enzymatic antioxidants (total phenolic compounds and total flavonoids), and enzymatic antioxidant activities superoxide dismutase, catalase, glutathione reductase) were determined after the stress treatments. Salt-induced growth reduction was more significant in S. melongena than in S. torvum, especially at high salt concentrations, indicating a (slightly) higher salt tolerance of the wild species. The mechanisms of tolerance of S. torvum were partly based on the active transport of toxic ions to the leaves at high external salinity and, presumably, a better capacity to store them in the vacuoles, as well as on the accumulation of proline to higher concentrations than in the cultivated eggplant. MDA and H2O2 contents did not vary in response to the salt treatments in S. torvum. However, in S. melongena, MDA content increased by 78% when 300 mM NaCl was applied. No activation of antioxidant mechanisms, accumulation of antioxidant compounds, or increase in the specific activity of antioxidant enzymes in any of the studied species was induced by salinity. The relatively high salt tolerance of S. torvum supports its use as rootstock for eggplant cultivation in salinized soils and as a possible source of salt-tolerance genes for the genetic improvement of cultivated eggplant.This study investigated the physiological and biochemical responses to salinity stress of Solanum melongena and its wild relative, Solanum torvum, commonly used as eggplant rootstock. Young plants of both species were watered during 25 days with NaCl aqueous solutions at the following four final concentrations: 0 (for the controls), 100, 200, and 300 mM. Plant growth parameters, photosynthetic pigments content, monovalent ion concentrations in roots and leaves, leaf levels of osmolytes (proline and total soluble sugars), oxidative stress markers (MDA and H2O2), non-enzymatic antioxidants (total phenolic compounds and total flavonoids), and enzymatic antioxidant activities (superoxide dismutase, catalase, glutathione reductase) were determined after the stress treatments. Salt-induced growth reduction was more significant in S. melongena than in S. torvum, especially at high salt concentrations, indicating a (slightly) higher salt tolerance of the wild species. The mechanisms of tolerance of S. torvum were partly based on the active transport of toxic ions to the leaves at high external salinity and, presumably, a better capacity to store them in the vacuoles, as well as on the accumulation of proline to higher concentrations than in the cultivated eggplant. MDA and H2O2 contents did not vary in response to the salt treatments in S. torvum. However, in S. melongena, MDA content increased by 78% when 300 mM NaCl was applied. No activation of antioxidant mechanisms, accumulation of antioxidant compounds, or increase in the specific activity of antioxidant enzymes in any of the studied species was induced by salinity. The relatively high salt tolerance of S. torvum supports its use as rootstock for eggplant cultivation in salinized soils and as a possible source of salt-tolerance genes for the genetic improvement of cultivated eggplant., This work was undertaken as part of the initiative "Adapting Agriculture to Climate Change: Collecting, Protecting and Preparing CropWild Relatives" which is supported by the Government of Norway and managed by the Global Crop Diversity Trust. For further information, see the project website: http://cwrdiversity.org/.Funding was also received from Ministerio de Ciencia, Innovacion y Universidades, Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional (grant RTI-2018-094592-B-100 from MCIU/AEI/FEDER, UE), European Union's Horizon 2020 Research and Innovation Programme under grant agreement No. 677379 (Linking genetic resources, genomes and phenotypes of Solanaceous crops; G2P-SOL) and Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (Ayuda a Primeros Proyectos de Investigacion; PAID-06-18). Mariola Plazas is grateful to Generalitat Valenciana and Fondo Social Europeo for a post-doctoral grant (APOSTD/2018/014). Marco Brenes is indebted to the Faculty of Biology of the Costa Rica Institute of Technology for partially supporting his stay in Valencia ("Fondo Solidario y Desarrollo Estudiantil").
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Comprehensive Review of Continuous Glucose Monitoring Accuracy during Exercise Periods

  • Muñoz Fabra, Elena
  • Laguna Sanz, Alejandro José
  • Diez, José-Luís|||0000-0002-5659-1212
  • Bondía Company, Jorge|||0000-0001-7286-3719
[EN] Continuous Glucose Monitoring (CGM) has been a springboard of new diabetes management technologies such as integrated sensor-pump systems, the artificial pancreas, and more recently, smart pens. It also allows patients to make better informed decisions compared to a few measurements per day from a glucometer. However, CGM accuracy is reportedly affected during exercise periods, which can impact the effectiveness of CGM-based treatments. In this review, several studies that used CGM during exercise periods are scrutinized. An extensive literature review of clinical trials including exercise and CGM in type 1 diabetes was conducted. The gathered data were critically analysed, especially the Mean Absolute Relative Difference (MARD), as the main metric of glucose accuracy. Most papers did not provide accuracy metrics that differentiated between exercise and rest (non-exercise) periods, which hindered comparative data analysis. Nevertheless, the statistic results confirmed that CGM during exercise periods is less accurate., This work was supported by the Ministerio de Economía, Industria y Competitividad (MINECO), Grant Number DPI2016-78831-C2-1-R, the Agencia Estatal de Investigación PID2019-107722RB-C21 / AEI /10.13039/501100011033, the European Union (FEDER funds), and the Vicerectorate of Research, Innovation and Technology Transference from the Universitat Politècnica de València (Grant Number PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of fuel injection parameters on premixed charge compression ignition combustion and emission characteristics in a medium-duty compression ignition diesel engine

  • Molina, Santiago|||0000-0001-7879-2421
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Villalta-Lara, David
[EN] From the different power plants, the compression ignition diesel engines are considered the best alternative to be used in the transport sector due to its high efficiency. However, the current emission standards impose drastic reductions for the main pollutants, that is, NOx and soot, emitted by this type of engines. To accomplish with these restrictions, alternative combustion concepts as the premixed charge compression ignition are being investigated nowadays. The objective of this work is to evaluate the impact of different fuel injection strategies on the combustion performance and engine-out emissions of the premixed charge compression ignition combustion regime. For that, experimental measurements were carried out in a single-cylinder medium-duty compression ignition diesel engine at low-load operation. Different engine parameters as the injection pattern timing, main injection timing and main injection fuel quantity were sweep. The best injection strategy was determined by means of a methodology based on the evaluation of a merit function. The results suggest that the best injection strategy for the low-load premixed charge compression ignition operating condition investigated implies using a high injection pressure and a triple-injection event with a delayed main injection with almost 15% of the total fuel mass injected., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This investigation has been funded by VOLVO Group Trucks Technology. The authors also acknowledge FEDER and Spanish Ministerio de Economia y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R) and the Universitat Politecnica de Valencia for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigacion (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of High Intensity Interval Training Using Elastic Bands on Glycemic Control in Adults with Type 1 Diabetes: A Pilot Study

  • Martín-San Agustín, Rodrigo
  • Laguna Sanz, Alejandro José
  • Roche, Enrique
  • Benítez Martínez, Josep C.
  • Ampudia-Blasco, F. Javier
  • Bondía Company, Jorge|||0000-0001-7286-3719
[EN] High intensity interval training (HIIT) using elastic bands is easy to do, but no data on its impact on glycemic control in people with type 1 diabetes (T1D) are available. Six males with T1D performed three weekly sessions of HIIT using elastic bands for 12 weeks. Each session consisted of eight exercises. Glycemic control was evaluated by using intermittent scanning continuous glucose monitoring two weeks before study onset (baseline) and during the intervention period in the first two (first stage) and last two weeks (last stage). In the 24 h post-exercise, time-in-range (70-180 mg/dL) was reduced from baseline to the end of the study (67.2% to 63.0%), and time-above-range (>180 mg/dL) seemed to increase from baseline across the study (20.8% -> 27.5% -> 22.1%, from baseline -> first -> last stage), but did not show any statistical significance. Time in hypoglycemia (either < 70 mg/dL or <54 mg/dL) did not show statistically significant differences. This study shows that a HIIT program with elastic bands is safe and effective to perform in T1D patients, keeping blood glucose levels in a safe range., This study was funded by MINECO DPI2016-78831-C2-1-R, Agencia Estatal de Investigacion (PID2019-107722RB-C21/AEI/10.13039/501100011033), FEDER funds from EU, and the Vicerectorate of Research, Innovation and Technology Transference from the Universitat Politecnica de Valencia grant number PAID-06-18. This study was also supported by the official funding agency for biomedical research of the Spanish government, Institute of Health Carlos III (ISCIII) through CIBEROBN CB12/03/30038, and CIBERDEM CB17/08/00004, which is co-funded by the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Does AI Qualify for the Job?: A Bidirectional Model Mapping Labour and AI Intensities

  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Tolan, Songül
  • Pesole, Annarosa
  • Fernández-Macías, Enrique
  • Gómez, Emilia
[EN] In this paper we present a setting for examining the relation between the distribution of research intensity in AI research and the relevance for a range of work tasks (and occupations) in current and simulated scenarios. We perform a mapping between labour and AI using a set of cognitive abilities as an intermediate layer. This setting favours a two-way interpretation to analyse (1) what impact current or simulated AI research activity has or would have on labour-related tasks and occupations, and (2) what areas of AI research activity would be responsible for a desired or undesired effect on specific labour tasks and occupations. Concretely, in our analysis we map 59 generic labour-related tasks from several worker surveys and databases to 14 cognitive abilities from the cognitive science literature, and these to a comprehensive list of 328 AI benchmarks used to evaluate progress in AI techniques. We provide this model and its implementation as a tool for simulations. We also show the effectiveness of our setting with some illustrative examples., This material is based upon work supported by the EU (FEDER), and the Spanish MINECO under grant RTI2018-094403-B-C3, the Generalitat Valenciana PROMETEO/2019/098. F. Martínez-Plumed was also supported by INCIBE (Ayudas para la excelencia de los equipos de investigación avanzada en ciberseguridad), the European Commission (JRC) HUMAINT project (CT-EX2018D335821-101), and UPV (PAID-06-18). J. H-Orallo is also funded by an FLI grant RFP2-152.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bi-objective parallel machine scheduling with additional resources during setups

  • Yepes-Borrero, Juan C.
  • Perea, Federico
  • Ruiz García, Rubén
  • Villa Juliá, Mª Fulgencia|||0000-0003-0019-8777
[EN] We present a bi-objective parallel machine scheduling problem with machine and job sequence dependent setup times, with the additional consideration of resources needed during setups. The availability of such resources is limited. This models many practical situations where setup times imply, for example, cleaning and/or the reconfiguration of productive equipment. These setups are performed by personnel, who are of course limited in number. The objectives considered are the minimization of the makespan and the minimization of the number of resources. Fewer available resources reduce production costs but inevitably increase the makespan. On the contrary, a greater number of resources increase costs but allow for more setups to be done in parallel and a reduced makespan. An algorithm based on iterated greedy approaches is proposed to search for the Pareto front of the problem. This algorithm is compared with state-of-the art methods adapted to the problem. Computational experiments, supported by statistical analyses, indicate that the proposed approach outperforms all other tested procedures., The authors would like to acknowledge the support from "Ministerio de Ciencia, Innovacion y Universidades" under grant "Optimizacion de Operaciones en Terminales Portuarias (OPTEP)" (No. RTI2018-094940-B-100) and grant MTM2016-74983, from the "Universitat Politecnica de Valencia" under grant SP20180164 of the program "Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia", and from the "Generalitat Valenciana" under grant "NUevos REtos en SEcuenciacion"(No. AICO/2020/049). Juan C. Yepes-Borrero acknowledges financial support by "El Instituto Colombiano de Credito Educativo y Estudios Tecnicos en el Exterior - ICETEX" under program "Pasaporte a la ciencia - Doctorado", grant number 3568118.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Octane number influence on combustion and performance parameters in a Dual-Mode Dual-Fuel engine

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Villalta-Lara, David
  • Lago-Sari, Rafael
[EN] Low temperature combustion stands as a promising alternative to realize low soot and NOx emissions while achieving fuel consumption benefits compared to the conventional diesel combustion. Nonetheless, its applicability is limited to narrow zones inside the engine map, reducing the potential benefits on a real driving case. In this scenario, the use of dual-mode dual-fuel combustion stands as an alternative to cover engine conditions up to full load, avoiding the constraints of the fully premixed combustion whenever is needed. This combustion concept is strongly influenced by the characteristics of the fuels that are used to create the charge stratification during the engine operation. The current research aims to evaluate the influence of the low reactivity fuel octane number on the combustion process and the average performance and emissions results. Additionally, the best octane number was determined by means of a merit function evaluation. Octane values of 100, 92.5, 87.5, 85 and 80 were obtained by blending iso-octane and heptane. Their performance was assessed in a medium-duty multi-cylinder platform at different representative operating conditions. The results suggest that fuels with octane number lower than 92.5 have a low impact at low load conditions. However, as load is increased, the high reactivity of the low research octane number fuels leads to early combustion processes, demanding settings modifications to avoid the appearance of excessive pressure gradients. As a consequence of these modifications, the fuel consumption and soot emissions increase. In general, RONs from 92.5 to 87.5 are less penalized, presenting the best merit function values, and therefore being the best fuels to be used in the hardware under investigation., The authors thanks VOLVO Group Trucks Technology and ARAMCO Overseas Company for supporting this research. The authors also acknowledge FEDER and Spanish Ministerio de Economía y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R) and the Universitat Politècnica de València for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigación (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Experimental Study of the Fuel Effect on Diffusion Combustion and Soot Formation under Diesel Engine-Like Conditions

  • García Carrero, Alba Andreina
[ES] Las emisiones de CO2 en el sector transporte se han incrementado considerablemente durante los últimos años debido al desarrollo económico mundial. El crecimiento de las flotas de transporte, junto con otros factores, ha contribuido al desequilibrio del ciclo de carbono del planeta. Es por ello que el CO2 se considera un gas de efecto invernadero de origen antropogénico que debe ser reducido para evitar el calentamiento global. Las estrategias para reducir el CO2 en el sector transporte están enfocadas a la electrificación y al uso de combustibles neutros o de bajo impacto al ambiente. Sin embargo, una efectiva implementación de esta última requiere un profundo entendimiento de la combustión con tales combustibles. En la presente tesis doctoral, se ha caracterizado experimentalmente la combustión de diferentes tipos de combustibles, entre ellos, algunos de bajo impacto en emisiones de CO2 como lo son el Aceite Vegetal Hidrotratado (HVO) y dos éteres de oximetileno (OME1 y OMEx).Además, por su potencial en la reducción de contaminantes se han evaluado mezclas de diésel y gasolina y de HVO y Gas Licuado de Petróleo (LPG), lo que requirió adecuar el sistema de inyección para evitar la evaporación a lo largo de la línea. Todos estos combustibles y mezclas han sido inyectados con una tobera mono-orificio y han sido evaluados mediante técnicas de visualización a alta velocidad bajo diferentes condiciones termodinámicas típicas de un motor de encendido por compresión operando en condiciones de combustión a baja temperatura, en instalaciones con accesos ópticos. Se ha analizado el efecto de las propiedades físico químicas de estos combustibles y mezclas sobre los parámetros característicos de un chorro como lo son la longitud líquida y la penetración de vapor. La combustión ha sido evaluada mediante la caracterización del tiempo de retraso, de la liberación de calor y la longitud del despegue de la llama, que viene condicionada por el proceso de mezcla. Igualmente, el estudio de la formación de hollín en función de las propiedades del combustible y de las características del proceso de mezcla, representa un aporte importante de esta tesis. En adición a los beneficios en reducción de CO2 que brindan los combustibles y mezclas utilizados en este estudio, estos también redujeron la formación de hollín en la cámara de combustión, destacándose entre ellos los combustibles oxigenados, especialmente el OMEx que además de no formar hollín, fue el de mayor reactividad en todas las condiciones de operación evaluadas., [CA] Les emissions de CO2 en el sector transport s'han incrementat considerablement durant els últims anys a causa del desenvolupament econòmic mundial. El creixement de les flotes de transport, juntament amb altres factors, ha contribuït al desequilibri del cicle de carboni del planeta. És per això, que el CO2 es considera un gas d'efecte hivernacle d'origen antropogènic que ha de ser reduït per evitar l'escalfament global. Les estratègies per reduir el CO2 dins el sector transport, estan enfocades a l'electrificació i a l'ús de combustibles neutres o de baix impacte ambiental. No obstant això, una efectiva implementació d'aquesta última, requereix un profund coneixement del procés de combustió d'aquests combustibles. En la present tesi doctoral, s'ha caracteritzat experimentalment la combustió de diferents tipus de combustibles, entre ells, alguns de baix impacte en emissions de CO2 com són l'Oli Vegetal Hidrotratat (HVO) i dos èters de oximetileno (OME1 i OMEx) .A més , degut al seu alt potencial en la reducció de contaminants, s'han avaluat mescles de dièsel i gasolina, i de HVO i Gas Liquat de Petroli (LPG), el que va requerir adequar el sistema d'injecció per evitar l'evaporació al llarg de la línia. Tots aquests combustibles i mescles han estat injectats amb una tovera mono-orifici i han estat avaluats mitjançant tècniques de visualització a alta velocitat a través dels accessos òptics del que disposa la instal·lació. Les diferents condicions termodinàmiques utilitzades son típiques d'un motor d'encesa per compressió operant en condicions de combustió a baixa temperatura. S'ha analitzat l'efecte de les propietats fisicoquímiques d'aquests combustibles i de les mescles sobre els paràmetres característics d'un raig com són la longitud líquida i la penetració de vapor. La combustió ha estat avaluada mitjançant la caracterització del temps de retard, de l'alliberació de calor i de la longitud de l'enlairament de la flama que ve condicionada pel procés de mescla. A més, l'estudi de la formació de sutge en funció de les propietats del combustible i de les característiques del procés de mescla, representa una aportació important d'aquesta tesi evidenciant que a més dels beneficis en reducció de CO2 que brinden tots aquests combustibles i mescles, també varen reduir la formació de sutge a la cambra de combustió, destacant-se entre ells els combustibles oxigenats, especialment el OMEx, que a més de no formar sutge, va ser el de major reactivitat en totes les condicions d'operació avaluades., [EN] CO2 emissions in the transport sector have increased considerably in recent years due to global economic development. The growth of transport fleets, along with other factors, has contributed to the imbalance of the planet's carbon cycle. For that, CO2 is considered a greenhouse gas from anthropogenic origin that must be reduced to avoid global warming. Strategies to reduce CO2 in the transport sector are focused on electrification and the use of neutral fuels or those with a low impact on the environment. However, an effective implementation of the latter requires a deep understanding of the combustion with those fuels. In this doctoral thesis, the combustion of different types of fuels has been experimentally characterized, including some with low impact on CO2 emissions such as Hydrotreated Vegetable Oil (HVO) and two oxymethylene ethers (OME1 and OMEx). Furthermore, due to their potential in reducing pollutants, blends of diesel and gasoline and HVO and Liquefied Petroleum Gas (LPG) have also been evaluated, which required adapting the injection system to avoid evaporation along the injection line. All these fuels and blends have been injected with a single-hole nozzle and they have been evaluated using high speed visualization techniques under different thermodynamic conditions typical of a compression ignition engine operating under low-temperature combustion conditions in installations with optical accesses. The effect of the physical-chemical properties of these fuels and blends on the characteristic parameters of a jet, such as the liquid length and the vapor penetration, has been analyzed. Combustion has been evaluated by characterizing the ignition delay, the heat release and the flame Lift-off length that is conditioned by the mixing process. Furthermore, the study of soot formation based on the fuel properties and the characteristics of the mixing process represents an important contribution of this thesis, showing that in addition to the benefits in CO2 reduction provided by the different fuels and blends used in this study, these fuels also reduced the soot formation in the combustion chamber, highlighting among them the oxygenated fuels, especially OMEx which, in addition to not forming soot, was the most reactive in all conditions of operation evaluated., This research has been partly funded by the Government of Spain and FEDER under TRANCO project (TRA2017-87694-R), by the European Union’s Horizon 2020 Programme through the ENERXICO project, grant agreement n° 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement n° B-S-69926 and by Universitat Politècnica de València through the Programa de Ayudas de Investigación y Desarrollo (PAID-01-18 and PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

InSilico Classifiers for the Assessment of Drug Proarrhythmicity

  • Llopis-Lorente, Jordi
  • Cano, Jordi
  • Gomis-Tena Dolz, Julio|||0000-0002-1309-2368
  • Romero Pérez, Lucia|||0000-0003-4605-8630
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
[EN] Drug-induced torsade de pointes (TdP) is a life-threatening ventricular arrhythmia responsible for the withdrawal of many drugs from the market. Although currently used TdP risk-assessment methods are effective, they are expensive and prone to produce false positives. In recent years, in silico cardiac simulations have proven to be a valuable tool for the prediction of drug effects. The objective of this work is to evaluate different biomarkers of drug-induced proarrhythmic risk and to develop an in silico risk classifier. Cellular simulations were performed using a modified version of the O'Hara et al. ventricular action potential model and existing pharmacological data (IC50 and effective free therapeutic plasma concentration, EFTPC) for 109 drugs of known torsadogenic risk (51 positive). For each compound, four biomarkers were tested: T-x (drug concentration leading to a 10% prolongation of the action potential over the EFTPC), T-qNet (net charge carried by ionic currents when exposed to 10 times the EFTPC with respect to the net charge in control), T-triang (triangulation for a drug concentration of 10 times the EFTPC over triangulation in control), and T-EAD (drug concentration originating early afterdepolarizations over EFTPC). Receiver operating characteristic (ROC) curves were built for each biomarker to evaluate their individual predictive quality. At the optimal cutoff point, accuracies for T-x, T-qNet, T-triang, and T-EAD were 89.9, 91.7, 90.8, and 78.9% respectively. The resulting accuracy of the hERG IC50 test (current biomarker) was 78.9%. When combining T-x, T-qNet and T-triang into a classifier based on decision trees, the prediction improves, achieving an accuracy of 94.5%. The sensitivity analysis revealed that most of the effects on the action potential are mainly due to changes in I-Kr, I-CaL, I-NaL and I-Ks. In fact, considering that drugs affect only these four currents, TdP risk classification can be as accurate as when considering effects on the seven main currents proposed by the CiPA initiative. Finally, we built a ready-to-use tool (based on more than 450 000 simulations), which can be used to quickly assess the proarrhythmic risk of a compound. In conclusion, our in silico tool can be useful for the preclinical assessment of TdP-risk and to reduce costs related with new drug development. The TdP risk-assessment tool and the software used in this work are available at https://riunet.upv.es/handle/10251/136919., This work was partially supported by the Direccion general de Politica Cientifica de la Generalitat Valenciana (PROMETEO/2020/043); by "Primeros Proyectos de Investigacion" (PAID06-18) from Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), Valencia, Spain; as well as from the "Plan Estatal de Investigacion Cientifica y Tecnica y de Innovacion 20172020" from the Ministerio de Ciencia e Innovacion y Universidades (PID2019-104356RB-C41/AEI/10.13039/501100011033). J.L.L. is being funded by the Ministerio de Ciencia, Innovacion y Universidades for the "Formacion de Profesorado Universitario" (Grant Reference: FPU18/01659).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metamaterial acoustics on the Poincaré disk

  • Tung, Michael Ming-Sha|||0000-0002-8760-0927
[EN] Historically, the Poincare disk model has taken a pioneering role in the development of non-Euclidean geometry. But still today, this model is critical as a playground for simulations and new theories. In this paper, we discuss how to implement and simulate acoustic wave phenomena on the Poincare disk with the help of so-called metamaterials. After formally developing a theory based on the acoustic potential for the curved spacetime of the Poincare model, we also provide practical instructions on how to manufacture the appropriate metadevice in a laboratory environment. Finally, as an example, analytical results for the nontrivial radial contributions in concentric wave propagation are derived, and the corresponding numerical predictions are presented., Spanish Ministerio de Economia y Competitividad, the European Regional Development Fund (ERDF), Grant/Award Number: TIN2017-89314-P; Programa de Apoyo a la Investigacion y Desarrollo 2018, Grant/Award Number: PAID-06-18
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

CRISP-DM Twenty Years Later: From Data Mining Processes to Data Science Trajectories

  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Ferri Ramírez, César|||0000-0002-8975-1120
  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Ramírez Quintana, María José|||0000-0002-0559-3568
  • Contreras-Ochando, Lidia
  • Kull, Meelis
  • Lachiche, Nicolas
  • Flach, Peter
[EN] CRISP-DM (CRoss-Industry Standard Process for Data Mining) has its origins in the second half of the nineties and is thus about two decades old. According to many surveys and user polls it is still thede factostandard for developing data mining and knowledge discovery projects. However, undoubtedly the field has moved on considerably in twenty years, with data science now the leading term being favoured over data mining. In this paper we investigate whether, and in what contexts, CRISP-DM is still fit for purpose for data science projects. We argue that if the project is goal-directed and process-driven the process model view still largely holds. On the other hand, when data science projects become more exploratory the paths that the project can take become more varied, and a more flexible model is called for. We suggest what the outlines of such a trajectory-based model might look like and how it can be used to categorise data science projects (goal-directed, exploratory or data management). We examine seven real-life exemplars where exploratory activities play an important role and compare them against 51 use cases extracted from the NIST Big Data Public Working Group. We anticipate this categorisation can help project planning in terms of time and cost characteristics., We thank the anonymous reviewers for their comments, which motivated the analysis in Section 5. This material is based upon work supported by the EU (FEDER), and the Spanish MINECO under Grant RTI2018-094403-B-C3, the Generalitat Valenciana PROMETEO/2019/098. F. MartinezPlumed was also supported by INCIBE (Ayudas para la excelencia de los equipos de investigacion avanzada en ciberseguridad), the European Commission (JRC) HUMAINT project (CT-EX2018D335821-101), and UPV (PAID-06-18). J. H-Orallo is also funded by an FLI grant RFP2-152.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

OMEx-diesel blends as high reactivity fuel for ultra-low NOx and soot emissions in the dual-mode dual-fuel combustion strategy

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Gil, A.|||0000-0001-7192-6992
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Lago-Sari, Rafael
[EN] Previous works demonstrated that the use of Oxymethylene ether (OMEx) in advanced combustion modes, as the dual-mode dual-fuel combustion, leads to a notable reduction of the lifecycle CO2 emissions while promoting lower NOx and soot emissions than those from conventional diesel combustion. Nonetheless, the low heating value of OMEx results in a fuel consumption increase. A possible solution to avoid this drawback is by blending OMEx with diesel fuel. This will help to introduce the OMEx in the market with minimum changes in the infrastructure. In this context, this work evaluates the impact of using OMEx-diesel blends in different mass percentages (50% and 70% of OMEx in diesel), compared to the reference net fuels (net diesel and OMEx) in a multi-cylinder compression ignition engine operating under dual-mode dual-fuel combustion at different engine loads (25%, 50%, 80% and 100%) and 1800 rpm. At each condition, an air mass sweep was performed to assess the limiting operating conditions with each fuel due to either excessive pressure gradients and soot production, or low combustion efficiency. The results suggested that the OMEx-diesel blends allow to reduce the soot emissions compared to net diesel for all the conditions tested. In addition, blends having an OMEx mass content greater than 70% allowed to fulfill the EUVI limits for NOx with ultra-low soot levels (< 0.01 g/kWh) up to 80% engine load. Nonetheless, the unique fuel able to achieve the EUVI limit for NOx with zero soot emissions simultaneously at 100% of engine load was found to be the pure OMEx., The authors thanks ARAMCO Overseas Company and VOLVO Group Trucks Technology for supporting this research. The authors acknowledge FEDER and Spanish Ministerio de Economia y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R). The authors also acknowledge the Universitat Politecnica de Valencia for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigacion (PAID-06-18). The author R. Sari acknowledges the financial support from the Spanish ministry of science innovation and universities under the grant "Ayudas para contratos predoctorales para la formacion de doctors" (PRE2018-085043).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Potential of e-Fischer Tropsch diesel and oxymethyl-ether (OMEx) as fuels for the dual-mode dual-fuel concept

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Villalta-Lara, David
  • Lago-Sari, Rafael
  • Gordillo Zavaleta, Victor
  • Gaillard, Patrick
[EN] The dual-mode dual-fuel combustion strategy allows operating over the entire engine map by implementing a diffusive dual-fuel combustion at high engine loads. This requires increasing the amount of exhaust gas re-circulation to control the NOx emissions, which penalizes the soot levels. At these conditions, the use of nonsooting fuels as the e-Fischer Tropsch Diesel (e-FT) and oxymethylene dimethyl ethers (OMEx) could be a potential way to avoid the NOx-soot trade-off. The experimental results acquired in a compression ignition multi-cylinder medium-duty engine evidence that the higher oxygen content of OMEx allows reducing the soot emissions at high loads to near zero levels, while e-FT promotes a soot reduction of around 20% as compared to diesel. Nonetheless, the low lower heating value of OMEx leads to excessive injection durations, enlarging the combustion process and increasing the fuel consumption around 1.3-7.2% and 1.4-5.3% as compared to diesel and e-FT, respectively, depending on the engine load. Finally, the well to wheel analysis confirms the potential in reducing the carbon dioxide footprint of OMEx (14.8-69%) and e-FT (0.3-38.5%) compared to diesel, as they can be synthetized via direct air capture as a source of carbon and using renewable energy., The authors thanks VOLVO Group Trucks Technology and Aramco Overseas Company for supporting this research. The authors also acknowledge FEDER and the Spanish Ministerio de Economia y Competitividad for partially supporting this research through the TRANCO project (TRA2017-87694-R), and the Universitat Politecnica de Valencia for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigacion (PAID-06-18)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Development and Application of Novel Techniques for European Eel Reproduction

  • Blanes García, Marta
[ES] La anguila europea (Anguilla anguilla) es un teleósteo catádromo que migra desde las aguas continentales hasta el Mar de los Sargazos para reproducirse. Actualmente, su producción acuícola depende del engorde de angulas (juveniles) capturadas hasta su tamaño comercial, ya que no se ha conseguido cerrar su ciclo de producción en cautividad. Diversos factores han contribuido al declive de sus poblaciones y provocado su clasificación como "Críticamente Amenazada". La reproducción en cautividad es la única alternativa posible para la conservación de esta especie. Para ello, se utilizan inyecciones semanales de gonadotropina coriónica humana (GCH) en los machos y extracto de hipófisis de carpa (EHC) o de salmón (EHS) en las hembras. Esta tesis se centra en dos nuevas metodologías para obtener gametos de anguila europea. La primera metodología se detalla en el capítulo 1, donde se describe el uso de bombas osmóticas implantadas en la cavidad del animal, que permiten una liberación lenta y continua de su contenido. En los machos, las bombas se llenaron con GCH recombinante, mientras que para las hembras se utilizó EHC. En los machos, las bombas osmóticas indujeron la espermiación, aunque la calidad del esperma fue muy baja en comparación con el método tradicional de inyecciones hormonales. Sin embargo, en las hembras, se logró que el 50% alcanzaran la madurez sexual entre las semanas 4 y 10 del tratamiento, reduciendo el tiempo necesario para la producción de ovocitos respecto a otros estudios. La segunda metodología se centró en el trasplante de espermatogonias. En los últimos años, la producción subrogada en teleósteos ha surgido como una técnica innovadora que permite obtener gametos de una especie donante mediante el trasplante de células germinales a un receptor. En peces, las espermatogonias tipo A indiferenciadas son células madre espermatogoniales que se dividen continuamente en la gónada inmadura hasta que comienza la espermatogénesis. El capítulo 2 estudió genes que podrían actuar como biomarcadores de espermatogonias de anguila para monitorizarlas en la especie receptora después del trasplante. Se realizaron análisis filogenéticos de vasa, dnd1 y nanos2, detectando una duplicación del gen vasa en la anguila europea. Para caracterizar estos genes, se evaluó su expresión mediante qPCR en músculo, testículo inmaduro y espermatogonias aisladas mediante una solución enzimática y un gradiente de Percoll. Los resultados mostraron que los cuatro genes se expresaban más en el testículo inmaduro que en el músculo. Además, se realizaron hibridación in situ e inmunohistoquímica en testículo inmaduro, concluyendo que vasa1 y vasa2 son los mejores biomarcadores de espermatogonias. En el capítulo 3, se llevó a cabo el xenotrasplante de espermatogonias de anguila europea en dos especies receptoras: la lubina (Dicentrarchus labrax) y el pez cebra (Danio rerio). Las espermatogonias se marcaron previamente con PKH26, un marcador fluorescente, y se realizaron análisis moleculares utilizando los biomarcadores identificados en el capítulo 2. Sin embargo, los resultados no detectaron la presencia de espermatogonias de anguila ni a mes y medio ni a seis meses después del trasplante en ninguna de las especies receptoras. En la discusión se abordan las limitaciones de ambas metodologías y se proponen nuevas estrategias para mejorar los resultados obtenidos en la presente tesis. Las bombas osmóticas fueron más eficaces en las hembras, y su optimización podría aumentar el porcentaje de individuos que alcanzan la madurez sexual de manera más temprana. En cuanto a la producción subrogada, la esterilización de las especies receptoras y la búsqueda de una especie filogenéticamente cercana a la anguila europea son factores clave para el éxito del procedimiento., [CA] L'anguila europea (Anguilla anguilla) és un teleosti catàdrom que migra des de les aigües continentals fins a la Mar dels Sargassos per a reproduir-se. Actualment, la seua producció aqüícola depén de l'engreix d'angules (juvenils) capturades fins a la seua grandària comercial, ja que no s'ha aconseguit tancar el seu cicle de producció en captivitat. Diferents factors han contribuït al declivi de les seues poblacions i han provocat la seua classificació com a "Críticament amenaçada". La reproducció en captivitat és l'única alternativa possible per a la conservació d'esta espècie. Per a això, s'empren injeccions setmanals de gonadotropina coriònica humana (GCH), en el cas dels mascles, i extracte d'hipòfisi de carpa (EHC) o de salmó (EHS) en les femelles. Esta tesi se centra en dues noves metodologies per a obtindre gàmetes d'anguila europea. La primera metodologia es detalla en el capítol 1, on es descriu l'ús de bombes osmòtiques implantats en la cavitat de l'animal, que permeten una alliberació lenta i continuada del seu contingut. En el cas dels mascles, les bombes es van omplir amb GCH recombinant, mentre que per a les femelles es va utilitzar EHC. Per als mascles, les bombes osmòtiques van induir la espermiació, però la qualitat de l'esperma era molt baixa comparada amb el mètode tradicional de injeccions hormonals. No obstant això, per a les femelles, es va aconseguir que el 50% maduraren sexualment entre la setmana 4 i la 10 del tractament, acurtant el temps necessari per a la producció d'oòcits en comparació amb altres estudis. La segona metodologia es centrà en el trasplantament d'espermatogonies. En els últims anys, la producció subrogada en teleostis ha emergit com una nova tècnica que permet obtenir gàmetes d'una espècie donant, a través del trasplantament de les cèl·lules germinals en un receptor. En peixos, les espermatogonies tipus A indiferenciades són aquelles cèl·lules mare espermatogonials que estan contínuament dividint-se en la gònada immadura, fins la diferenciació en la espermatogènesi. El capítol 2 es va centrar en estudiar gens que podrien actuar com a biomarcadors d'espermatogonies d'anguila per a, una vegada realitzat el trasplantament, poder monitoritzar-les en l'espècie receptora. Primer, es van fer anàlisis filogenètiques de vasa, dnd1 i nanos2, detectant una duplicació en el gen vasa per a l'anguila europea. Per a caracteritzar aquests gens, s'avaluà l'expressió gènica de vasa1, vasa2, dnd1 i nanos2 mitjançant qPCR, en múscul, testicle immadur d'anguila i espermatogonies aïllades mitjançant una solució enzimàtica i gradient de Percoll. Els quatre gens s'expressaven més en el testicle immadur que en el múscul. A més, es va realitzar hibridació in situ i immunohistoquímica, ambdues tècniques en testicle immadur. Es va concloure que vasa1 i vasa2 eren els millors marcadors d'espermatogonies per al testicle immadur. En el capítol 3, es va dur a terme el xenotrasplantament d'espermatogonies d'anguila europea en dues espècies, el llobarro (Dicentrarchus labrax) i el peix zebra (Danio rerio). Per a monitoritzar el trasplantament, les espermatogonies havien sigut marcades prèviament amb PKH26, i a més es van fer anàlisis moleculars emprant els biomarcadors del capítol 2. Els resultats d'ambdues tècniques no van revelar l'existència d'espermatogonies d'anguila un mes i mig i/o sis mesos després del trasplantament en cap dels peixos receptors. Finalment, en la discussió es tracta la problemática de les dues metodologies, així com noves vies per a millorar els resultats obtinguts en la present tesi. Les bombes osmòtiques van resultar més eficaces per a les femelles, i l'optimitzaciópodría augmentar el percentage de femelles que aconseguixen la maduresa sexual en un período primerenc. En el cas de la producció subrogada, l'esterilització de les espècies receptores, així com la busca d'una espècie filogenèticament emparentada amb l'anguila europea son crucials per a l'èxit d'aquest procediment., [EN] The European eel (Anguilla anguilla) is a catadromous teleost that migrates from continental waters to the Sargasso Sea to spawn. Current aquaculture relies on capturing juveniles (glass eels) and rearing them to commercial size, as closing their production cycle in captivity has not yet been achieved. Different factors have led to a significant decline in eel populations, currently classified as "Critically Endangered" status. Due to the high demand for eel consumption, captive reproduction is the only viable alternative for its conservation. To induce sexual maturation in captivity, weekly injections of human chorionic gonadotropin (hCG) are administered to males, while carp (CPE) or salmon pituitary extract (SPE) are used for females. This thesis explores two new methods to obtain European eel gametes. The first methodology is detailed in Chapter 1, which describes the use of osmotic pumps to obtain gametes from both male and female European eels. These devices, implanted in the animal's intraperitoneal cavity, allow a slow and continuous release of their content. In the case of males, the pumps were filled with recombinant hCG, while CPE was used for females. For males, the osmotic pumps induced spermiation, but the sperm quality was very low compared to the traditional method with hormone injections. However, for females, 50% of them achieved sexual maturation between the 4th and 10th week of treatment, shortening the time required for oocyte production compared to previous studies. The second methodology focused on spermatogonial transplantation. In recent years, surrogate production in teleosts has emerged as a new technique that allows obtaining gametes from a donor species through the transplantation of germ cells into a recipient species. In fish, undifferentiated type A spermatogonia are those spermatogonial stem cells that continuously divide in the immature gonad until the spermatogenesis. Chapter 2 focused on studying genes that could act as biomarkers of eel spermatogonia to monitor them in the recipient species once the transplantation was performed. Phylogenetic analyses of genes identified as germ cell markers in other species were conducted: vasa, dnd1, and nanos2. This revealed a duplication of the vasa gene in the European eel. To characterize these genes, a quantitative gene expression analysis of vasa1, vasa2, dnd1, and nanos2 was performed using qPCR in muscle, immature eel testis, and spermatogonia isolated using an enzymatic solution and Percoll gradient. The results revealed that the four genes were expressed more in the immature testis than in the muscle. Additionally, in situ hybridization and immunohistochemistry were performed in immature testis. It was concluded that vasa1 and vasa2 were the best markers of spermatogonia for the immature testis. In Chapter 3, the xenotransplantation of European eel spermatogonia into two species, the European seabass (Dicentrarchus labrax) and the zebrafish (Danio rerio), was carried out. To monitor the transplantation, the spermatogonia were previously labeled with the fluorescent membrane marker PKH26, and molecular analyses were also performed using the biomarkers primers designed in Chapter 2. The results of both techniques did not reveal the existence of eel spermatogonia one and a half months and/or six months after the transplantation in any of the recipient fish. Finally, the discussion addresses the issues of both methodologies, as well as new ways to improve the results obtained in this thesis. The osmotic pumps were more effective for females, and optimizing the method could increase the percentage of females reaching sexual maturity in an early period. In the case of surrogate production, the sterilization of the recipients as well as the search towards a phylogenetically related species with European eel are crucial for the success of this procedure., This thesis was partially funded by Ayuda a Primeros Proyectos de Investigación from the Vicerrectorado de Investigación, Innovación y Transferencia de la Universitat Politècnica de València through the project ANTRA: Aplicación de nuevas técnicas para el control de la reproducción de la anguilla europea (PAID-06-18); the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement Nº 642893 (IMPRESS); the MCIU (Ministerio de Ciencia e Innovación y Universidades) through the project Development and application of the techniques for the surrogate production of European eel gametes by xenotransplantation of spermatogonia in other fish species (EELGONIA; RTI2018-096413-B-I00), as well as by the European Union NextGenerationEU (PRTR-C1.I1) and the Generalitat Valenciana (THINKINAZUL/2021/012) to SEASPERM. The author of this PhD received a predoctoral contract from the Universitat Politècnica de València (PAID-01-20) to carry out this thesis. In addition, complementary training was conducted during short-term scientific stays at the Faculty of Fisheries and Protection of Waters, University of South Bohemia (Vodnany, Czech Republic) for 1 month; at the Department of Aquaculture, Hungarian University of Agriculture and Life Sciences (Gödöllő, Hungary) for 2 months; and at the Palavas Experimental Aquaculture Research Station (Palavas-les-Flots, France) for 3 weeks. These stays were funded by project EELGONIA (Czech Republic and Hungary) and AQUAEXCEL 3.0 (France)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Radial turbine sound and noise characterisation with acoustic transfer matrices by means of fast one-dimensional models

  • Torregrosa, A. J.|||0000-0003-0933-1626
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Inhestern, Lukas Benjamin
  • Soler-Blanco, Pablo
[EN] Estimating correctly the turbine acoustics can be valuable during the engine design stage; in fact, it can lead to a more optimised design of the silencer and aftertreatment, as well as to better prediction of the scavenging effects. However, obtaining the sound and noise emissions of radial turbocharger turbines with low computational costs can be challenging. To consider these effects in a time-efficient manner, the acoustic response of single-entry radial turbines can be characterised by means of acoustic transfer matrices that change with the operating conditions. Exploiting the different time-scales of the acoustic phenomena and the change in the operating point of the turbine, lookup tables of acoustic transfer matrices can be computed. Then, the obtained characterisation can be used in mean-value engine models. This article presents a method for generating these lookup tables by means of fast one-dimensional simulations of thoroughly validated fidelity, in terms of both acoustics and extrapolation capabilities. Due to the inherent behaviour of radial turbines, the number of computations needed to fill the lookup tables is relatively small, so the method can be used as a simple preprocessing phase before mean-value simulation campaigns.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Tx, TqNet and Ttriang Values, In-Silico Classifiers for Assessment of Drug Proarrhytmicity

  • Llopis Lorente, Jordi
  • Cano García, Jordi
  • Gomis-Tena Dolz, Julio|||0000-0002-1309-2368
  • Romero Pérez, Lucia|||0000-0003-4605-8630
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
  • Trenor Gomis, Beatriz Ana|||0000-0001-9166-6112
This repository contains the Matlab functions used in [1] and six Excel files named “Tx matrix KrKsCaL.xlsx”, “Tx matix KrNaLCaL.xlsx”, “TqNet matrix KrKsCaL.xlsx”, “TqNet matrix KrNaLCaL.xlsx”, "Ttirang matrix KrKsCaL.xlsx" and “Ttirang matrix KrNaLCaL.xlsx”. These files contain the value of three arrhythmogenic indices proposed in [1] (Tx, TqNet and Ttriang) resulting from simulations of drug effects on the action potential. The simulations were performed in a modified version of the O’Hara-Rudy model (ORd) [2] of human endocardial ventricular cells (492.536 simulations). References: [1]. Llopis J., Gomis-Tena J., Cano J., Romero L., Saiz J., Trenor B. In-Silico Classifiers for Assessment of Drug Proarrhythmicity. 2020 (Currently under revision) [2]. O’Hara, T.; Virág, L.; Varró, A.; Rudy, Y. Simulation of the Undiseased Human Cardiac Ventricular Action Potential: Model Formulation and Experimental Validation. PLoS Comput. Biol. 2011, 7 (5), e1002061., The authors would like to strongly thank Dr. Manuel Pastor from Research Programme on Biomedical Informatics (GRIB), at Universitat Pompeu Fabra (Barcelona, Spain) for its review of the manuscript and expert opinions and suggestions. This work was partially supported by the Dirección general de Política Científica de la Generalitat Valencia (PROMETEU2016/088), Primeros Proyectos de Investigación (PAID-06-18), Vicerrectorado de Investigación, Innovación y Transferencia de la Universitat Politècnica de València (UPV), València, Spain as well as Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016 from the Ministerio de Economía, Industria y Competitividad of Spain (DPI2016-75799-R) and AEI/FEDER, UE. JL is being funded by the Ministerio de Ciencia, Innovación y Universidades for the Formación de Profesorado Universitario (grant reference: FPU18/01659).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Experimental and Modeling Strategy for Obtaining Complete Characteristic Maps of Dual-Volute Radial Inflow Turbines

  • Serrano, J.R.|||0000-0003-0692-3917
  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Samala, Vishnu
  • Guilain, Stephane
  • Batard, Samuel
[EN] Despite the importance of turbocharged engines with dual-volute turbines, their characteristic maps and fully predictive modeling using 1D gas dynamic codes are not well established yet. The complexity of unsteady flow and the unequal admission of these turbines, when operating with pulses of engine exhaust gas, makes them a challenging system. This is mainly due to the unequal flow admission, which generates an additional degree-of-freedom with respect to well-known single entry vanned or vaneless turbines. This paper has as the main novelty a simple procedure for characterizing experimentally and elaborating characteristic maps of these turbines with unequal flow conditions. This method of analysis allows for easy interpolation within the proposed characteristic maps or conceiving simple models for calculating and extrapolating full performance parameters of dual-volute turbines. Two innovative 0D mean-line models are described that require a minimum quantity of experimental data for calibrating both: the mass flow parameter model and the isentropic efficiency model. Both models are predictive either in partial or unequal flow conditions using as inputs: the mass flow ratio and the total temperature ratio between branches; the blade speed ratio and the pressure ratio in each branch. These six inputs are generally instantaneously provided by 1D gas-dynamics codes. Therefore, the novelty of the model is its ability to be used in a quasi-steady way for dual volute turbines performance prediction. This can be done instantaneously when turbines are calculated operating at turbocharged engines under pulsating and unequal flow conditions., Vishnu Samala was partially supported through post-doctoral contract 2020-UPV-SUB.2-12450, Spanish system of Science, Technology and Innovation in research structures of Universitat Politecnica de Valencia (UPV). This work was partially funded by the 'Ayuda a Primeros Proyectos de-Investigacion' (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la UPV, Valencia, Spain. The authors wish to thank M.A. Ortiz and R. Carrascosa for their invaluable work during the experimental setup and testing campaign.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Approaching the genetic dissection of indirect adventitious organogenesis process in tomato explants

  • Sanchez-Lopez, Jorge
  • Ortiz-Atienza, Ana
  • Capel, Carmen
  • García Sogo, Begoña
  • Yuste-Lisbona, Fernando J.
  • Lozano, Rafael
  • Atarés Huerta, Alejandro|||0000-0003-1728-5471
  • Jáquez-Gutiérrez, Marybel
  • Pineda Chaza, Benito José|||0000-0001-9176-701X
  • Moreno Ferrero, Vicente|||0000-0002-0345-7300
[EN] The screening of 862 T-DNA lines was carried out to approach the genetic dissection of indirect adventitious organogenesis in tomato. Several mutants defective in different phases of adventitious organogenesis, namely callus growth (tdc-1), bud differentiation (tdb-1,-2,-3) and shoot-bud development (tds-1) were identified and characterized. The alteration of the TDC-1 gene blocked callus proliferation depending on the composition of growth regulators in the culture medium. Calli from tds-1 explants differentiated buds but did not develop normal shoots. Histological analysis showed that their abnormal development is due to failure in the organization of normal adventitious shoot meristems. Interestingly, tdc-1 and tds-1 mutant plants were indistinguishable from WT ones, indicating that the respective altered genes play specific roles in cell proliferation from explant cut zones (TDC-1 gene) or in the organization of adventitious shoot meristems (TDS-1 gene). Unlike the previous, plants of the three mutants defective in the differentiation of adventitious shoot-buds (tdb-1,-2,-3) showed multiple changes in vegetative and reproductive traits. Cosegregation analyses revealed the existence of an association between the phenotype of the tdb-3 mutant and a T-DNA insert, which led to the discovery that the SlMAPKKK17 gene is involved in the shoot-bud differentiation process., Vicente Moreno and Rafael Lozano thank the Ministry of Science and Innovation (State Innovation Agency) for granting the projects PID2019-110833RB-C32 and PID2019-110833RB-C31. Benito Pineda's work in the context of this article has been funded by 'Aid for First Research Projects (PAID-06-18)' by the Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), Valencia, Spain'. The PhD fellowship for Jorge Sanchez-Lopez and Marybel Jaquez-Gutierrez were funded by the Universidad de Sinaloa and the CONACYT of Mexico.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Negotiating knowledge: The role of network hedging in the production of high-impact science

  • Deste Cukierman, Pablo
  • Arias-Diaz-Faes, Adrian|||0000-0003-1928-4608
  • Ter Wal, Anne L. J.
[EN] Extant research shows that knowledge networks with a greater diversity of participants and richer in structural holes are more conducive to advancing science and innovation. However, research on network structure and network composition tends to overlook how actors might best utilize their connections. In this study, we seek to unpack the variation in how individuals leverage the opportunities afforded by their networks, focusing on the scientific knowledge production process. Given the uncertainty faced by scientists during the different stages of the research process, we argue that network hedging - consulting multiple individuals for the same resource need - rather than network compartmentalization - turning to a particular network contact for a specific resource need - increases the likelihood of research findings with greater scientific impact. By analyzing granular data on the network mobilization decisions and scientific outputs for a sample of biomedical scientists, we find support for our prediction that network hedging is positively associated with the production of high-impact scientific output, and that this effect is manifest beyond the benefits of being embedded in more diverse or sparser networks., Adrian A. Diaz-Faes enjoyed a visiting appointment at Imperial Business School funded by the Generalitat Valenciana (BEST/2019/022), which was instrumental in developing this paper. This work was supported by the Universitat Politecnica de Valencia (PAID-06-18/SP20180098), the Spanish Ministry of Science and Innovation (RTI2018-101232-B-I00), and the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant agreement No. 715280). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). There was no additional external funding received for this study. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Hydronium Detection in Hardened Concrete

  • Martínez-Ibernón, Ana|||0000-0003-2136-5650
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
  • Gasch, Isabel|||0000-0001-7036-4481
  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
[EN] The monitoring of reinforced concrete structures allows us to detect the presence of aggressive agents into of the concrete matrix, on site and in a real time. These aggressive agents can produce the unexpected failure of the structures, thus discovering their presence is a fundamental aspect in the preservation of people safety and the durability of the structure. On the other hand, helps to reduce the cost of maintenance and repair operations, due to allow us to identify the problems faster, minimizing the intervention to be done. The present research paper was focused in the hydronium detection; the reduction of this species generates hydrogen, the hydrogen produces the embrittlement and cracking of the steel, which seriously compromises the right behaviour of the structure. The problem of hydrogen appears in industries such as ammonia processing or petrochemistry industries and nuclear power plants. All of them are industries in which a failure seriously compromises the welfare of people and the environment. Therefore, the detection of hydrogen penetration in reinforcement concrete structures in these cases are very interesting. In this study, with the purpose to detect the hydronium or hydrogen in the hardened concrete matrices is proposed the use of voltammetric sensor, which is part of a multisensory system called Electronic-Tongue. This is a preliminary study. The objective of these initial steps was to evaluate the detection capability of the sensor. Currently, have been designing a sequential test in order to evaluate the sensor in different partial hydrogen pressures with the purpose to develop mathematical models to the hydronium or hydrogen detection and quantification in hardened concrete matrix., The authors would like to express their gratitude to the Spanish Ministry of Science and Innovation for the pre-doctoral scholarship granted to Ana Martínez Ibernón (FPU 16/00723). Also, to the Universitat Politècnica de València for the financial support in the project ¿Ayudas a Primeros Proyectos de Investigación (PAID-06-18)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced Accuracy of Continuous Glucose Monitoring during Exercise through Physical Activity Tracking Integration

  • Laguna Sanz, Alejandro José
  • Giménez, Marga
  • Diez, José-Luís|||0000-0002-5659-1212
  • Bondía Company, Jorge|||0000-0001-7286-3719
[EN] Current Continuous Glucose Monitors (CGM) exhibit increased estimation error during periods of aerobic physical activity. The use of readily-available exercise monitoring devices opens new possibilities for accuracy enhancement during these periods. The viability of an array of physical activity signals provided by three different wearable devices was considered. Linear regression models were used in this work to evaluate the correction capabilities of each of the wearable signals and propose a model for CGM correction during exercise. A simple two-input model can reduce CGM error during physical activity (17.46% vs. 13.8%, p < 0.005) to the magnitude of the baseline error level (13.61%). The CGM error is not worsened in periods without physical activity. The signals identified as optimal inputs for the model are Mets (Metabolic Equivalent of Tasks) from the Fitbit Charge HR device, which is a normalized measurement of energy expenditure, and the skin temperature reading provided by the Microsoft Band 2 device. A simpler one-input model using only Mets is also viable for a more immediate implementation of this correction into market devices., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) (Grant Number DPI2016-78831-C2-1-R), the European Union (FEDER funds), and the Vicerectorate of Research, Innovation and Technology Transference from the Universitat Politecnica de Valencia (Grant Number PAID-06-18). We would like to acknowledge the work performed by Josep Vehí, Lyvia Biagi, Ignacio Conget and Carmen Quirós. We thank all the participants and clinical staff who participated in clinical acquisition and pre-formatting of data for study, without whom none of this work would have been possible.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dual fuel combustion and hybrid electric powertrains as potential solution to achieve 2025 emissions targets in medium duty trucks sector

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Martínez-Boggio, Santiago Daniel
  • Gaillard, Patrick
  • Poussin, Olivier
  • Amer, Amer A.
[EN] The European commission is targeting a 15% reduction in CO2 emissions for medium and heavy-duty transportation starting in 2025. Moreover, the next European normative (EU VII) will impose a decrease of 50% for NOx and particulate matter emissions with respect to the current EUVI normative. Meeting these requirements pose a significant challenge to truck and bus manufacturers. Several proposals appeared in the last few years as improve the cabin aerodynamics, decrease the friction losses and improve the powertrain efficiency. The last point involves improving the current combustion systems as well as the transmission and energy management. This work proposes to couple two potential technologies to reduce at the same time the global (CO2) and local pollution (NOx and soot). For this, two truck platforms representative of medium-duty applications (18 ton and 25 ton) are tested using the reactivity controlled compression ignition (RCCI) combustion mode with diesel and gasoline as fuels. In addition, the trucks are electrified to full hybrid technology in a parallel pre-transmission (P2) architecture. A 0D vehicle numerical model is used to evaluate the trucks under four different driving cycles representative of homologation and real driving conditions. The numerical model is validated against on road measurements. The RCCI combustion is modeled by means of a map-based approach with 54 points measured in steady-state conditions. This work presents a complete engine map calibration with measurements up to 350 hp using two combustion modes inside the map (so-called dual-mode dual-fuel). As a baseline, the commercial diesel no-hybrid trucks and the dual-fuel no-hybrid trucks are used. The results show the potential of the dual-mode dual-fuel combustion to achieve ultra-low NOx and soot emissions. In addition, the CO2 target reduction is achieved for several truck platforms and driving conditions due to the hybridization of the driveline. The cycles with large phases of urban driving are the most favorable due to the ability of recovering energy by means of the regenerative braking system and the possibility to avoid large idling phases with respect to the no-hybrid versions. In addition, the decrease of the payload improves the CO2 reduction with respect to the baseline cases., The authors thanks ARAMCO Overseas Company and VOLVO Group Trucks Technology for supporting this research. The authors acknowledge FEDER and Spanish Ministerio de Economia y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R). The authors also acknowledge the Universitat Polit`ecnica de Val`encia for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigacion (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploration of suitable injector configuration for dual-mode dual-fuel engine with diesel and OMEx as high reactivity fuels

  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Sanchis, Enrique José|||0000-0002-6856-8992
  • Fogué-Robles, Álvaro
[EN] Dual-mode dual-fuel (DMDF) combustion stands over other low temperature combustion strategies as it is able to operate over the entire engine map by transitioning between reactivity controlled compression ignition and diffusive combustion depending on the engine load. In combination with non-sooting e-fuels, it is able to achieve low NOx and soot levels even at high loads. Oxygenated fuels like poly-oxymethylene dimethyl ethers (OMEx) have been already proved to present an outstanding NOx-Soot trade-off improvement when used in combination with a DMDF combustion strategy. One drawback of OMEx is that, despite having a high reactivity, it has a low lower heating value, which requires considerably longer injection events compared to other traditional fuels in order to achieve the same engine power output. The long injections limit the flexibility of the injection strategy and result in extremely long combustion durations. A possible solution to this problem resides in moving towards injectors with higher flow rate capacities, but this may compromise the mixing and combustion processes. This work aims to shed some light on the implications of changing the engine hardware to overcome this limitation by testing a DMDF mull-cylinder engine using gasoline as the low-reactivity fuel and diesel or OMEx as the high reactivity fuels with injectors of different flow capacity. The results show that a concise analysis of the involved phenomenology of the combustion process allows to find out the trade-off between the engine-out emissions and the mixing capacity of the injection system while the engine performance is not significantly affected., The authors thanks VOLVO Group Trucks Technology and ARAMCO Overseas Company for supporting this research. The authors also acknowledge FEDER and Spanish Ministerio de Economia y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R) and the Universitat Politecnica de Valencia for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigacion (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Localization of charging stations for electric vehicles using genetic algorithms

  • Jordán, Jaume|||0000-0003-0400-9136
  • Palanca Cámara, Javier|||0000-0002-6209-9603
  • Del Val Noguera, Elena|||0000-0002-1279-3429
  • Julian, Vicente|||0000-0002-2743-6037
  • Botti V.|||0000-0002-6507-2756
[EN] The electric vehicle (EV) is gradually being introduced in cities. The impact of this introduction is less due, among other reasons, to the lack of charging infrastructure necessary to satisfy the demand. In today¿s cities there is no adequate infrastructure and it is necessary to have action plans that allow an easy deployment of a network of EV charging points in current cities. These action plans should try to place the EV charging stations in the most appropriate places for optimizing their use. According to this, this paper presents an agent-oriented approach that analyses the different configurations of possible locations of charging stations for the electric vehicles in a specific city. The proposed multi-agent system takes into account data from a variety of sources such as social networks activity and mobility information in order to estimate the best configurations. The proposed approach employs a genetic algorithm (GA) that tries to optimize the possible configurations of the charging infrastructure. Additionally, a new crossover method for the GA is proposed considering this context., This work was partially supported by MINECO/FEDER RTI2018-095390-B-C31 and MODINVECI project of the Spanish government. Vicent Botti and Jaume Jordan are funded by UPV PAID-06-18 project. Jaume Jordan is funded by grant APOSTD/2018/010 of GVA-FSE
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using osmotic pumps to induce sexual maturation in male and female European eels

  • Blanes-García, M.
  • García-Salinas, Pablo
  • MORINI, MARINA
  • Pérez Igualada, Luz María|||0000-0002-6678-7446
  • Asturiano, Juan F.|||0000-0002-6441-5294
  • Gallego Albiach, Victor|||0000-0002-9733-0625
[EN] Simple Summary The European eel is a species with high commercial value for aquaculture, and it has suffered a drastic reduction of its natural stocks during the last decades; thus, breeding in captivity is nowadays considered essential to avoid the extinction of the species. In this sense, a new method to maturate the European eel (males and females) for eel aquaculture has been studied. For the first time in the European eel, a controlled release hormone system (osmotic pumps) has been tested, which allowed to induce the testis maturation and sperm production in part of the males as well as a very early maturation and ovulation in the females. The European eel (Anguilla anguilla) is a commercially valued species for aquaculture. Over the past decades, it has experienced a drastic reduction in its natural stocks. Thus, breeding in captivity is considered essential, nowadays, to guarantee the eel aquaculture and to reduce pressure on natural populations. Traditionally, the European eel has been sexually matured by means of weekly hormonal injections, which cause stress to the fish. The purpose of this research study was to assess the use of osmotic pumps as a new method to induce sexual maturation in male and female European eels, without the weekly injection. The control groups were treated with weekly hormone injections (recombinant human chorionic gonadotropin for males and carp pituitary extract for females), and the implanted groups were treated with osmotic pumps (ALZET(R) osmotic pumps) loaded with the respective hormones. Regarding male European eels, this study shows that the use of controlled release systems was able to induce the maturation and spermiation, but without the necessary capacity to produce enough gametes with acceptable quality parameters that could meet the needs of a commercial eel hatchery. Concerning female European eels, the study demonstrates that the use of osmotic pumps loaded with CPE became an effective method, generating early maturations (4 to 10 weeks) in 50% of the females, so this method could become a viable alternative for eel hatchery procedures., This research was funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV) Valencia, Spain". V.G. and M.M. have postdoc grants from the MICIU (IJCI-2017-34200) and the Generalitat Valenciana (APOSTD/2020/053), respectively. P.G.-S. and M.B.-G. have Ph.D. grants from the European Union through the Operational Program of the European Social Fund (ESF) of the Comunitat Valenciana 2014-2020 (ACIF/2018/147) and from the Universitat Politecnica de Valencia (PAID-01-20), respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental validation of a one-dimensional twin-entry radial turbine model under non-linear pulse conditions

  • Serrano, J.R.|||0000-0003-0692-3917
  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Soler-Blanco, Pablo
  • Cheung, Raymond
[EN] This article presents the experimental validation of a complete integrated one-dimensional twin-scroll turbine model able to be used in reciprocating internal combustion engine unsteady simulations. A passenger car with a twin-entry-type turbine has been tested under engine-like pulse conditions by means of a specifically built gas stand. To obtain high-resolution quality data, the turbine and turbine line pipes have been instrumented with mean and instantaneous pressure sensors as well as temperature and mass flow sensors, employing a uniquely designed rotating valve for the pulse generation. This experimental configuration enables to obtain the pressure decomposition in both inlets and outlets of the turbine. Using the experimental data obtained, the model is fully validated, with special focus on the reflected and transmitted components for analysing the performance of the model and its non-linear acoustics prediction capabilities. The model presents a very high degree of correlation with the experimental results, providing a range of errors similar to the uncertainty of the measurements, even in the medium- and high-frequency spectra., The author(s) disclosed receipt of the following financial support for the research, authorship and/or publication of this article: This work was supported by the 'Ayuda a Primeros Proyectos de Investigacion' (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), Valencia, Spain. P.S. was partially supported through contract FPI-2017-S2-1428 of Programa de Apoyo para la Investigacion y Desarrollo (PAID) of Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A time and frequency domain analysis of the effect of vibrating fuel assemblies on the neutron noise

  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Carreño, Amanda|||0000-0003-2302-1157
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Demazière, C.
[EN] The mechanical vibrations of fuel assemblies have been shown to give rise to high levels of neutron noise, triggering in some circumstances the necessity to operate nuclear reactors at a reduced power level. This work analyses the effect in the neutron field of the oscillation of one single fuel assembly. Results show two different effects in the neutron field caused by the fuel assembly vibration. First, a global slow variation of the total reactor power due to a change in the criticality of the system. Second, an oscillation in the neutron flux in-phase with the assembly vibration. This second effect has a strong spatial dependence that can be used to localize the oscillating assembly. This paper shows a comparison between a time-domain and a frequency-domain analysis of the phenomena to calculate the spatial response of the neutron noise. Numerical results show a really close agreement between these two approaches., This project has received funding from the Euratom research and training programme 2014-2018 under grant agreement No 754316. Also, this work has been partially supported by Spanish Ministerio de Economia y Competitividad under project BES-2015-072901 and financed with the help of a Primeros Proyectos de Investigation (PAID-06-18), Vicerrectorado de Investigacitin, Innovation y Transferencia of the Universitat Politecnica de Valencia (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling gaseous non-reactive flow in a lean direct injection gas turbine combustor through an advanced mesh control strategy

  • Payri, Raul|||0000-0001-7428-5510
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Carreres, Marcos|||0000-0001-6430-6613
  • Belmar-Gil, Mario
[EN] Fuel efficiency improvement and harmful emissions reduction are the main motivations for the development of gas turbine combustors. Numerical computational fluid dynamics (CFD) simulations of these devices are usually computationally expensive since they imply a multi-scale problem. In this work, gaseous non-reactive unsteady Reynolds-Averaged Navier-Stokes and large eddy simulations of a gaseous-fueled radial-swirled lean direct injection combustor have been carried out through CONVERGE (TM) CFD code by solving the complete inlet flow path through the swirl vanes and the combustor. The geometry considered is the gaseous configuration of the CORIA lean direct injection combustor, for which detailed measurements are available. The emphasis of the work is placed on the demonstration of the CONVERGE (TM) applicability to the multi-scale gas turbine engines field and the determination of an optimal mesh strategy through several grid control tools (i.e., local refinement, adaptive mesh refinement) allowing the exploitation of its automatic mesh generation against traditional fixed mesh approaches. For this purpose, the normalized mean square error has been adopted to quantify the accuracy of turbulent numerical statistics regarding the agreement with the experimental database. Furthermore, the focus of the work is to study the behavior when coupling several large eddy simulation sub-grid scale models (i.e., Smagorinsky, Dynamic Smagorinsky, and Dynamic Structure) with the adaptive mesh refinement algorithm through the evaluation of its specific performances and predictive capabilities in resolving the spatial-temporal scales and the intrinsically unsteady flow structures generated within the combustor. This investigation on the main non-reacting swirling flow characteristics inside the combustor provides a suitable background for further studies on combustion instability mechanisms., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was partly sponsored by the program "Ayuda a Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), Spain.'' The support given to Mr. Mario Belmar by Universitat Politecnica de Valencia through the "FPI-Subprograma 2'' grant within the "Programa de Apoyo para la Investigacion y Desarrollo (PAID-01-18)'' is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simulation of Harmonic Oscillators on the Lattice

  • Tung, Michael Ming-Sha|||0000-0002-8760-0927
  • Ibáñez González, Jacinto Javier|||0000-0002-6912-4453
  • Defez Candel, Emilio|||0000-0002-3303-6371
  • Sastre, Jorge|||0000-0002-8612-6717
[EN] This work deals with the simulation of a two¿dimensional ideal lattice having simple tetragonal geometry. The harmonic character of the oscillators give rise to a system of second¿order linear differential equations, which can be recast into matrix form. The explicit solutions which govern the dynamics of this system can be expressed in terms of matrix trigonometric functions. For the derivation we employ the Lagrangian formalism to determine the correct solutions, which extremize the underlying action of the system. In the numerical evaluation we develop diverse state¿of¿the¿art algorithms which efficiently tackle equations with matrix sine and cosine functions. For this purpose, we introduce two special series related to trigonometric functions. They provide approximate solutions of the system through a suitable combination. For the final computation an algorithm based on Taylor expansion with forward and backward error analysis for computing those series had to be devised. We also implement several MATLAB programs which simulate and visualize the two¿dimensional lattice and check its energy conservation., This work has been supported by the Spanish Ministerio de Economia y Competitividad, the European Regional Development Fund (ERDF) under grant TIN2017-89314-P, and the Programa de Apoyo a la Investigacion y Desarrollo 2018 (PAID-06-18) of the Universitat Politecnica de Valencia under grant SP20180016.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Breathing on UWB Propagation Characteristics for Ingestible and Implantable Devices

  • Garcia-Pardo, Concepcion|||0000-0002-2774-980X
  • Fornés Leal, Alejandro|||0000-0001-5914-6045
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
  • Frasson, Matteo
  • Pons Beltran, Vicente
[EN] Wireless in-body devices are those in which a medical sensor is introduced-implanted or ingested- inside the human body and communicates with a remote node. Some in-body applications demand high data rates, so ultrawideband (UWB) spectrum has been proposed as a good candidate because of its large bandwidth available. Besides, breathing can lead to internal movement of the torso and consequently, of devices installed in this area. Thus, the radio channel performance can be affected by such movement leading to a malfunction of the radio interface of the medical device. This work aims at analyzing the effect of breathing on the propagation channel by means of in vivo measurements in living animal models. Continuous wave (CW) measurements have been carried out for live different frequencies in the lower part of the UWB band, and the effects of breathing on the relative received power (module and phase) are analyzed and discussed, This work was supported in part by the Ministerio de Ciencia e Innovacion under Grant RTI2018-099880-B-C31 and in part by the Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia through the Colorrectal Diagnosis of Tumours Based on EM Properties (COLODEM) Project under Grant PAID-06-18 (First Research Projects)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental approach for the analysis of the flow behaviour in the stator of a real centripetal turbine

  • Galindo, José|||0000-0001-6068-182X
  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Hervás-Gómez, Natalia
[EN] During normal operation, radial turbines may work in off-design conditions. Off-design conditions may be characterised by very low expansion ratios, very high expansion ratios, very low rotational speeds or very high rotational speeds. All of these cases are difficult to characterise experimentally due to high experimental uncertainties or a lack of capabilities in the system feeding pressurised air to the turbine. Also, there are two- and three-dimensional computational fluid dynamics simulations at these operating points but could not be accurate enough due to high turbulence effects, flow detachment and shock wave generation. With a lack of high-quality data, experimental or computational, to fit the reduced-order turbine models used in zero- and one-dimensional engine simulations, there are large uncertainties associated to their results in off-design conditions. This work develops an experimental facility able to characterise the internal flow of radial turbine stators in terms of pressure and velocity fields at off-design and regular working conditions. The facility consists of an upscaled model of a radial turbine volute and stator fed with air in pressure- and temperature-controlled conditions, so different sensors can be used inside it with the least amount of flow disturbance. The different restrictions considered in the design of the upscaled model are presented, and their effects in the final experimental apparatus capabilities are discussed. A preliminary comparison between computational fluid dynamics simulations and experimental data shows encouraging results., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was partly sponsored by the programme 'Ayuda a Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia (UPV), Spain'. The support given to Ms N.H.G. by Universitat Politecnica de Valencia through the 'FPI-Subprograma 2' (No. FPI-2018-S2-1368) grant within the 'Programa de Apoyo para la Investigacion y Desarrollo (PAID-0118)' is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Individual wave overtopping volumes on mound breakwaters in breaking wave conditions and gentle sea bottoms

  • Mares-Nasarre, Patricia
  • Molines, Jorge|||0000-0001-7850-0759
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] Mound breakwaters are usually designed to limit the mean wave overtopping rate (q) or the maximum individual wave overtopping volume (V-max). However, rarely do studies focus on wave overtopping volumes on breakwaters in depth-limited breaking wave conditions. This study analyzes 2D physical tests on mound breakwaters with relevant overtopping rates (0.33 <= R-c/H-m0 <= 2.83) and three armor layers (Cubipod (R)-1L, rock-2L and cube-2L) in depth-limited breaking wave conditions (0.20 <= H-m0/h(s) <= 0.90) and with two bottom slopes (m = 1/25 and m = 1/50). The 2-parameter Weibull distribution was used to estimate V-max* = V-max/(gH(m0)T(01)(2)) with co-efficient of determination R-2 = 83.3%. In this study, the bottom slope (m = 1/50 and m = 1/25) did not significantly influence V-mox or the number of overtopping events, N-ow. During the design phase of a mound breakwater, q is required to use the methods given in the literature to estimate Thus, q must be estimated for design purposes when measured q is not available. In this study, CLASH Neural Network (CLASH NN) was used to estimate q with R-2 = 63.6%. If the 2-parameter Weibull distribution proposed in this study is used to estimate V-max with q estimated using CLASH NN, the prediction error of V-max* is R-2 = 61.7%. With the method presented in this study, the ratio between estimated and measured falls within the range 1/2 to 2 (90% error band) when q is estimated with CLASH NN. The new estimators derived in this study provide good predictions of N-ow and V-max with a method simpler than those in the literature on overtopped mound breakwaters in depth-limited breaking wave conditions on gentle sea bottoms (1/50 <= m <= 1/25)., The authors acknowledge the financial support from the Ministerio de Economia y Competitividad and Fondo Europeo de Desarrollo Regional (FEDER) under grant RTI2018-101073-B-I00, Universitat Politecnica de Valencia (Grant SP20180111), Primeros Proyectos de Investigacion (PAID06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia and Generalitat Valenciana (Grant AEST/2019/004). The first author was also financially supported through the FPU program (Formacion de Profesorado Universitario) funded by Ministerio de Educacion, Cultura y Deporte under grant FPU16/05081. The authors thank Debra Westall for revising the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Multi-touch-based assessment of hand mobility, dexterity and function. Preliminary study of validity, reliability and sensitivity to upper limb impairment severity in individuals with stroke.

  • Latorre, Jorge
  • Mollà-Casanova, Sara
  • Salinas, Bárbara
  • Colomer, Carolina
  • Borrego, Adrián|||0000-0001-5134-7811
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
[EN] Impairments of the upper limb function are among the most common and disabling sequelae after stroke, and their rehabilitation poses a major challenge for current physical and occupational therapy interventions. While restoration of certain degree of proximal and global movements and function is expected, the recovery of premorbid hand mobility and dexterity is less likely to occur. Although great efforts are usually made to rehabilitate these skills, with customized particular and analytic exercises, their assessment is rarely made with the same level of specificity. In general, hand and finger mobility and functionality are indirectly assessed in the clinic with standardized clinical scales and tests that require the use of these skills to perform some tasks. Although these scales are easy to administer, they can present poor accuracy, be biased, and do not allow for isolated assessment of joints and movements. Multi-touch technology enables interaction with electronic devices, such as smartphones and tablets, with on-screen finger touches. Although there is a very limited number of studies that investigate the potential of this technology to rehabilitate hand mobility and dexterity, the use of this technology for assessment of these skills remains unexplored. This study evaluates the feasibility of a multi-touch-based assessment tool (app) of hand mobility and dexterity in a sample of post-stroke survivors. Our results provide preliminary evidence that this technology can be used to design valid and reliable instruments for assessing hand mobility and dexterity that, in addition, are sensitive to the severity of the motor impairment of the upper limb after stroke, which could complement conventional clinical assessment., This study was partially funded by project VALORA, Fundació la Marató de la TV3 (grant 201701-10), grant BES-2014-068218 of the Ministerio de Economía y Competitividad of Spain, and grant Ayuda a Primeros Proyectos de Investigación (PAID-06-18), Vicerrectorado de Investigación, Innovación y Transferencia de la Universitat Politècnica de València, València, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gait analysis with the Kinect v2: normative study with healthy individuals and comprehensive study of its sensitivity, validity, and reliability in individuals with stroke

  • Latorre, Jorge
  • Colomer, Carolina
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
[EN] Background: Gait is usually assessed by clinical tests, which may have poor accuracy and be biased, or instrumented systems, which potentially solve these limitations at the cost of being time-consuming and expensive. The different versions of the Microsoft Kinect have enabled human motion tracking without using wearable sensors at a low-cost and with acceptable reliability. This study aims: First, to determine the sensitivity of an open-access Kinect v2-based gait analysis system to motor disability and aging; Second, to determine its concurrent validity with standardized clinical tests in individuals with stroke; Third, to quantify its inter and intra-rater reliability, standard error of measurement, minimal detectable change; And, finally, to investigate its ability to identify fall risk after stroke. Methods: The most widely used spatiotemporal and kinematic gait parameters of 82 individuals post-stroke and 355 healthy subjects were estimated with the Kinect v2-based system. In addition, participants with stroke were assessed with the Dynamic Gait Index, the 1-min Walking Test, and the 10-m Walking Test. Results: The system successfully characterized the performance of both groups. Significant concurrent validity with correlations of variable strength was detected between all clinical tests and gait measures. Excellent inter and intra-rater reliability was evidenced for almost all measures. Minimal detectable change was variable, with poorer results for kinematic parameters. Almost all gait parameters proved to identify fall risk. Conclusions: Results suggest that although its limited sensitivity to kinematic parameters, the Kinect v2-based gait analysis could be used as a low-cost alternative to laboratory-grade systems to complement gait assessment in clinical settings., This study was funded by project VALORA, grant 201701-10 of the Fundacio la Marato de la TV3 (Barcelona, Spain), and grant "Ayuda a Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia" (Valencia, Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental evaluation of radon detector performance under controlled conditions: Statistical assessment and calibration strategy

  • Noverques-Medina, Aina|||0000-0002-7810-0381
  • Juste-Vidal, Belen-Jeanne|||0000-0003-1978-3765
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Trull-Hernandis, C.
[EN] This work presents a quantitative evaluation of radon detectors under controlled environmental conditions using the RDN-SENUBIO-UPV radon chamber. The study emphasizes the statistical assessment of spatial radon distribution and the comparative sensitivity analysis of multiple detector models against a high-precision Alpha-GUARD monitor. A comprehensive methodology is developed, involving the calculation of relative errors, analysis of variance (ANOVA), and normality testing (Kolmogorov-Smirnov), to assess measurement consistency. Moreover, individual correction factors are derived and validated through repeated experimental trials to improve the accuracy of time-dependent measurements. The proposed calibration protocol enhances measurement reliability by accounting for detector-specific response dynamics and environmental transients. The results support the implementation of reproducible correction schemes and contribute to improved quality assurance practices in radon monitoring. The approach provides a rigorous statistical framework applicable to other radiation detection systems., This work has been funded by two projects: Estudio del comportamiento del gas radon: modelizacion y control en diferentes condiciones operativas para la evaluacion de la dosis recibida (PAID-06-24, Universitat Politecnica de Valencia) and Utilizacion y efectividad de equipos de proteccion individual frente al radon y suprogenie (SUBV-1-2024, Consejo de Seguridad Nuclear) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Neutronic Simulation of Fuel Assembly Vibrations in a Nuclear Reactor

  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Carreño, Amanda|||0000-0003-2302-1157
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Demazière, C.
[EN] The mechanical vibrations of core internals such as fuel assemblies (FAs) cause oscillations in the neutron flux that require in some circumstances nuclear power plants to operate at a reduced power level. This work simulates and analyzes the changes of the neutron flux throughout a nuclear core due to the oscillation of a single FA without considering thermal-hydraulic feedback. The amplitude of the FA vibration is bounded to a few millimeters, and this implies the use of fine meshes and accurate numerical solvers due to the different scales of the problem. The results of the simulations show a main oscillation of the neutron flux with the same frequency as the FA vibration along with other harmonics at multiples of the vibration frequency much smaller in amplitude. Also, this work compares time domain analysis and frequency domain analysis of the mechanical vibrations. Numerical results show a close match between these two approaches for the fundamental frequency., This project has received funding from the Euratom research and training programme 2014-2018 under grant agreement number 754316. Also, this work has been partially supported by Spanish Ministerio de Economia y Competitividad under project BES-2015-072901 and financed with the help of Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia of the Universitat Politecnica de Valencia (UPV).