Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ultrastable Magnetic Nanoparticles Encapsulated in Carbon for Magnetically Induced Catalysis

  • Martínez-Prieto, Luis Miguel
  • Marbaix, Julien
  • Asensio, Juan M.
  • Fazzini, Pier-Francesco
  • Soulantica, Katerina
  • Chaudret, Bruno
  • Cerezo-Navarrete, Christian
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Magnetically induced catalysis using magnetic nanoparticles (MagNPs) as heating agents is a new efficient method to perform reactions at high temperatures. However, the main limitation is the lack of stability of the catalysts operating in such harsh conditions. Normally, above 500 degrees C, significant sintering of MagNPs takes place. Here we present encapsulated magnetic FeCo and Co NPs in carbon (Co@C and FeCo@C) as an ultrastable heating material suitable for high-temperature magnetic catalysis. Indeed, FeCo@C or a mixture of FeCo@C:Co@C (2:1) decorated with Ni or Pt-Sn showed good stability in terms of temperature and catalytic performances. In addition, consistent conversions and selectivities regarding conventional heating were observed for CO2 methanation (Sabatier reaction), propane dehydrogenation (PDH), and propane dry reforming (PDR). Thus, the encapsulation of MagNPs in carbon constitutes a major advance in the development of stable catalysts for high-temperature magnetically induced catalysis., The authors thank the Instituto de Tecnologia Quimica (ITQ), Consejo Superior de Investigaciones Cientificas (CSIC), Universitat Politecnica de València (UPV) for the facilities and Severo Ochoa programe (SEV-2016-0683), "Juan de la Cierva" by MINECO (IJCI-2016-27966), and Primero Proyectos de Investigación PAID-06-18 (SP20180088) for financial support. The authors acknowledge ERC Advanced Grants (MONACAT-2015-694159 and SynCatMatch-2014671093). We also thank the Electron Microscopy Service of the UPV for TEM facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel nickel nanoparticles stabilized by imidazolium-amidinate ligands for selective hydrogenation of alkynes

  • López-Vinasco, Angela M.
  • Martínez-Prieto, Luis Miguel
  • Asensio, Juan M.
  • Lecante, Pierre
  • Chaudret, Bruno
  • Cámpora, Juan
  • van Leeuwen, Piet W. N. M.
[EN] The main challenge in the hydrogenation of alkynes into (E)- or (Z)-alkenes is to control the selective formation of the alkene, avoiding the over-reduction to the corresponding alkane. In addition, the preparation of recoverable and reusable catalysts is of high interest. In this work, we report novel nickel nanoparticles (Ni NPs) stabilized by three different imidazolium-amidinate ligands (ICy center dot(NCN)-N-(Ar); L1: Ar = p-tol, L2: Ar = p-anisyl and L3: Ar = p-ClC6H4). The as-prepared Ni NPs were fully characterized by (HR)-TEM, XRD, WASX, XPS and VSM. The nanocatalysts are active in the hydrogenation of various substrates. They present a remarkable selectivity in the hydrogenation of alkynes towards (Z)-alkenes, particularly in the hydrogenation of 3-hexyne into (Z)-3-hexene under mild reaction conditions (room temperature, 3% mol Ni and 1 bar H-2). The catalytic behaviour of Ni NPs was influenced by the electron donor/acceptor groups (-Me, -OMe, -Cl) in the N-aryl substituents of the amidinate moiety of the ligands. Due to the magnetic character of the Ni NPs, recycling experiments were successfully performed after decantation in the presence of an external magnet, which allowed us to recover and reuse these catalysts at least 3 times preserving both activity and chemoselectivity., The authors thank CNRS, UPS-Toulouse, INSA, "IDEX/Chaires d'attractivite l'Universite Federale Toulouse Midi-Pyrenees", "Instituto de Tecnologia Quimica" (ITQ; UPV-CSIC), "Juan de la Cierva" programme (IJCI-2016-27966), "Primero Proyectos de Investigacion" (PAID-06-18), "Instituto de Investigaciones Quimicas" (IIQ; CSIC-US), "Ministerio de Ciencia, Innovacion y Universidades" (MCIU/AEI), FEDER funds of the European Union (PGC2018-095768-B-I00) and ERC Advanced Grant (MONACAT 2015-694159) for financial support. We also thank L. Datas for the TEM facilities (UMS Castaing) and S. Cayez for the HRTEM measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synergism of Au and Ru Nanoparticles in Low-Temperature Photoassisted CO2 Methanation

  • Mateo-Mateo, Diego
  • De Masi, Deborah
  • Lacroix, Lisa-Marie
  • Fazzini, Pier-Francesco
  • Chaudret, Bruno
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Au and Ru nanoparticles have been deposited on Siralox® substrate by impregnation and chemical reduction, respectively (Au-Ru-S). The as-prepared material has demonstrated to be very active for the selective CO2 metanation to CH4 at temperatures below 250 oC. In addition, Au-Ru-S exhibits CH4 production enhancement upon UV-Vis light irradiation starting at temepratures higher than 200 oC, although the contribution of the photoassisted pathway of CH4 production decreases as temperature increases. Thus, a maximum CH4 production of 204 mmol/gRu at 250 oC upon 100 mW/cm2 irradiation was achieved. Control experiments using Ru-S and Au-S materials revealed that Ru nanoparticles are the CO2 methanation active sites, while Au NPs contribute harvesting light, mainly visible as consequence of the strong Au plasmon band centrered at 529 nm. The visible light absorbed by Au NPs plasmon could act as local heaters of neighbouring Ru NPs, increasing their temperature and enhancing CH4 production., D. M., J.A., and H.G. thank the Spanish Ministry of Economy and Competitiveness (Severo Ochoa SEV2016-0683 and CTQ2015-69563-CO2-1), Generalitat Valenciana (Prometeo 2017-083) for financial support. J.A. and D.M. also thank UPV for a postdoctoral scholarship and the Spanish Ministry of Science for a PhD Scholarship, respectively. This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No GA694159 MONACAT).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Magnetically Induced Catalytic Reduction of Biomass-Derived Oxygenated Compounds in Water

  • Cerezo-Navarrete, Christian
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Mustieles Marin, Irene
  • García-Miquel, Héctor
  • Chaudret, Bruno
  • Martínez-Prieto, Luis Miguel
[EN] The development of energetically efficient processes for the aqueous reduction of biomass-derived compounds into chemicals is key for the optimal transformation of biomass. Herein we report an early example of the reduction of biomass-derived oxygenated compounds in water by magnetically induced catalysis. Non-coated and carbon-coated core-shell FeCo@Ni magnetic nanoparticles were used as the heating agent and the catalyst simultaneously. In this way it was possible to control the product distribution by adjusting the field amplitude applied during the magnetic catalysis, opening a precedent for this type of catalysis. Finally, the encapsulation of the magnetic nanoparticles in carbon (FeCo@Ni@C) strongly improved the stability of the magnetic catalyst in solution, making its reuse possible up to at least eight times in dioxane and four times in water., The authors thank the Agencia Estatal de Investigacion (AEI), the Ministerio de Ciencia e Innovacion (MCIN), and the "Ramon y Cajal" program (RYC2020-030031-I) for financial support. The authors also acknowledge an ERC Advanced Grant (MONACAT 2015-694159). C.C.-N. gratefully thanks Generalitat Valenciana for a predoctoral fellowship (GVA: ACIF/2019/076).
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

A setup to measure the temperature-dependent heating power of magnetically heated nanoparticles up to high temperature.

  • Mille, N.
  • Faure, Stephane
  • Estrader i Bofarull, Marta
  • Yi, Deliang
  • Marbaix, Julien
  • De Masi, D.
  • Soulantica, Katerina
  • Millán, A.
  • Chaudret, Bruno
  • Carrey, J.
Magnetic heating, namely, the use of heat released by magnetic nanoparticles (MNPs) excited with a high-frequency magnetic field, has so far been mainly used for biological applications. More recently, it has been shown that this heat can be used to catalyze chemical reactions, some of them occurring at temperatures up to 700 °C. The full exploitation of MNP heating properties requires the knowledge of the temperature dependence of their heating power up to high temperatures. Here, a setup to perform such measurements is described based on the use of a pyrometer for high-temperature measurements and on a protocol based on the acquisition of cooling curves, which allows us to take into account calorimeter losses. We demonstrate that the setup permits to perform measurements under a controlled atmosphere on solid state samples up to 550 °C. It should in principle be able to perform measurements up to 900 °C. The method, uncertainties, and possible artifacts are described and analyzed in detail. The influence on losses of putting under vacuum different parts of the calorimeter is measured. To illustrate the setup possibilities, the temperature dependence of heating power is measured on four samples displaying very different behaviors. Their heating power increases or decreases with temperature, displaying temperature sensibilities ranging from -2.5 to +4.4% K-1. This setup is useful to characterize the MNPs for magnetically heated catalysis applications and to produce data that will be used to test models permitting to predict the temperature dependence of MNP heating power.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Iron carbide or iron carbide/cobalt nanoparticles for magnetically-induced CO2 hydrogenation over Ni/SiRAlOx catalysts

  • Kale, Sumeet S.
  • Asensio, Juan M.
  • Estrader i Bofarull, Marta
  • Werner, Mayke
  • Bordet, Alexis
  • Yi, Deliang
  • Marbaix, Julien
  • Fazzini, Pier Francesco
  • Soulantica, Katerina
  • Chaudret, Bruno
Magnetic nanoparticles have recently been used as heating agents in heterogeneously catalyzed reactions such as CO2 hydrogenation into methane. In the present work, we explore the potential of heating agents presenting different heating properties in the activation of a supported catalyst based on nickel nanoparticles (NPs) (Ni/SiRAlOx) for the CO2 methanation under continuous flow. Two types of Fe2.2C NPs presenting distinct heating properties have been tested. For Fe2.2C NPs displaying lower heating powers of ca. 1 kW g−1, an activation of the catalyst at a magnetic field amplitude of 80 mT is necessary to achieve high conversion and selectivity, this activation step being attributed to a partial sintering of the Ni NPs. When using Fe2.2C NPs displaying much higher heating powers of 2 kW g−1 as heating agents, the magnetic field amplitude required to activate the catalyst can be reduced to 48 mT. Finally, we demonstrate that hard magnetic materials displaying very low heating power but high Curie temperatures, such as Co nanorods (NRs), can be used as relay heating agents when mixed with small amounts of softer materials with high heating power. Thus, by mixing Co NRs with Fe2.2C NPs, excellent catalytic performances (90% of CO2 and 100% CH4 selectivity) have been obtained after applying only 32 mT to trigger the reaction. Once the reaction initiated, these performances are maintained even after lowering the magnetic field to 16 mT, which is advantageous in terms of energy consumption.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchically structured reactors containing nanocarbons for intensification of chemical reactions

  • García-Bordejé, José Enrique
  • Liu, Yuefeng
  • Su, Dang Sheng
  • Pham-Huu, Cuong
34 Figuras, Carbon nanomaterials, such as carbon nanotubes, carbon nanofibers and graphene, featuring functional properties and tailored nanoscale dimensions have been widely used in different research fields, especially for catalysis and sustainable chemistry. Hierarchically structured reactors, combining nanoscopic coating carbon layers to disperse the active phase or even directly as metal-free catalysts, with controlled macroscopic shapes, have been extensively developed over the last few decades for numerous relevant catalytic processes, where mass and heat transfer is easily optimized for better catalytic performance and stability. The 3D structuration enables the full exploitation of the intrinsic activity of the catalyst and its industrial deployment without drawbacks linked with nanomaterials. In this review article, we will summarize the recent developments involved in the field of hierarchically structured reactors, i.e. monoliths, foam and other materials, containing carbon nanomaterials. It is expected that such structured reactors will receive high scientific and industrial interest in the future not only in the field of catalysis but also in those linked with wastewater purification or aerosol filtration processes. It will also be evidenced how hierarchically structured materials have contributed to the intensification of catalytic processes compared to conventional reactors, thus paving the way to the enhancement of other chemical reactions and their industrial deployment., Dr Y. F. Liu and Prof. D. S. Su acknowledge the financial support by the NSFC of China (No. 91645117, 21606243 and 21473223). The European Commission is acknowledged for the funding through the projects MONACAT and FREECATS., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel nickel nanoparticles stabilized by imidazolium-amidinate ligands for selective hydrogenation of alkynes

  • López-Vinasco, Ángela M.
  • Martínez-Prieto, Luis Miguel
  • Asensio, Juan M.
  • Lecante, Pierre
  • Chaudret, Bruno
  • Cámpora, Juan
  • Leeuwen, P.W.N.M. van
The main challenge in the hydrogenation of alkynes into (E)- or (Z)-alkenes is to control the selective formation of the alkene, avoiding the over-reduction to the corresponding alkane. In addition, the preparation of recoverable and reusable catalysts is of high interest. In this work, we report novel nickel nanoparticles (Ni NPs) stabilized by three different imidazolium-amidinate ligands (ICy·(Ar)NCN; L1: Ar = p-tol, L2: Ar = p-anisyl and L3: Ar = p-ClC6H4). The as-prepared Ni NPs were fully characterized by (HR)-TEM, XRD, WASX, XPS and VSM. The nanocatalysts are active in the hydrogenation of various substrates. They present a remarkable selectivity in the hydrogenation of alkynes towards (Z)-alkenes, particularly in the hydrogenation of 3-hexyne into (Z)-3-hexene under mild reaction conditions (room temperature, 3% mol Ni and 1 bar H2). The catalytic behaviour of Ni NPs was influenced by the electron donor/acceptor groups (¿Me, ¿OMe, ¿Cl) in the N-aryl substituents of the amidinate moiety of the ligands. Due to the magnetic character of the Ni NPs, recycling experiments were successfully performed after decantation in the presence of an external magnet, which allowed us to recover and reuse these catalysts at least 3 times preserving both activity and chemoselectivity., The authors thank CNRS, UPS-Toulouse, INSA, “IDEX/Chaires d'attractivité l'Université Fédérale Toulouse Midi-Pyrénées”, “Instituto de Tecnología Química” (ITQ; UPV-CSIC), “Juan de la Cierva” programme (IJCI-2016-27966), “Primero Proyectos de Investigación” (PAID-06-18), “Instituto de Investigaciones Químicas” (IIQ; CSIC-US), “Ministerio de Ciencia, Innovación y Universidades” (MCIU/AEI), FEDER funds of the European Union (PGC2018-095768-B-I00) and ERC Advanced Grant (MONACAT 2015-694159) for financial support. We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetically Induced Catalytic Reduction of Biomass-Derived Oxygenated Compounds in Water

  • Cerezo-Navarrete, Christian
  • Mustieles Marin, Irene
  • García-Miquel, H.
  • Corma, Avelino
  • Chaudret, Bruno
  • Martínez-Prieto, Luis Miguel
The development of energetically efficient processes for the aqueous reduction of biomass-derived compounds into chemicals is key for the optimal transformation of biomass. Herein we report an early example of the reduction of biomass-derived oxygenated compounds in water by magnetically induced catalysis. Non-coated and carbon-coated core-shell FeCo@Ni magnetic nanoparticles were used as the heating agent and the catalyst simultaneously. In this way it was possible to control the product distribution by adjusting the field amplitude applied during the magnetic catalysis, opening a precedent for this type of catalysis. Finally, the encapsulation of the magnetic nanoparticles in carbon (FeCo@Ni@C) strongly improved the stability of the magnetic catalyst in solution, making its reuse possible up to at least eight times in dioxane and four times in water., The authors thank the Agencia Estatal de Investigación (AEI), the Ministerio de Ciencia e Innovación (MCIN), and the “Ramón y Cajal” program (RYC2020-030031-I) for financial support. The authors also acknowledge an ERC Advanced Grant (MONACAT 2015-694159). C.C.-N. gratefully thanks Generalitat Valenciana for a predoctoral fellowship (GVA: ACIF/2019/076).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A setup to measure the temperature-dependent heating power of magnetically heated nanoparticles up to high temperature.

  • Mille, N.
  • Faure, Stephane
  • Estrader i Bofarull, Marta
  • Yi, Deliang
  • Marbaix, Julien
  • De Masi, D.
  • Soulantica, Katerina
  • Millán, A.
  • Chaudret, Bruno
  • Carrey, J.
Magnetic heating, namely, the use of heat released by magnetic nanoparticles (MNPs) excited with a high-frequency magnetic field, has so far been mainly used for biological applications. More recently, it has been shown that this heat can be used to catalyze chemical reactions, some of them occurring at temperatures up to 700 °C. The full exploitation of MNP heating properties requires the knowledge of the temperature dependence of their heating power up to high temperatures. Here, a setup to perform such measurements is described based on the use of a pyrometer for high-temperature measurements and on a protocol based on the acquisition of cooling curves, which allows us to take into account calorimeter losses. We demonstrate that the setup permits to perform measurements under a controlled atmosphere on solid state samples up to 550 °C. It should in principle be able to perform measurements up to 900 °C. The method, uncertainties, and possible artifacts are described and analyzed in detail. The influence on losses of putting under vacuum different parts of the calorimeter is measured. To illustrate the setup possibilities, the temperature dependence of heating power is measured on four samples displaying very different behaviors. Their heating power increases or decreases with temperature, displaying temperature sensibilities ranging from -2.5 to +4.4% K-1. This setup is useful to characterize the MNPs for magnetically heated catalysis applications and to produce data that will be used to test models permitting to predict the temperature dependence of MNP heating power.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Iron carbide or iron carbide/cobalt nanoparticles for magnetically-induced CO2 hydrogenation over Ni/SiRAlOx catalysts

  • Kale, Sumeet S.
  • Asensio, Juan M.
  • Estrader i Bofarull, Marta
  • Werner, Mayke
  • Bordet, Alexis
  • Yi, Deliang
  • Marbaix, Julien
  • Fazzini, Pier Francesco
  • Soulantica, Katerina
  • Chaudret, Bruno
Magnetic nanoparticles have recently been used as heating agents in heterogeneously catalyzed reactions such as CO2 hydrogenation into methane. In the present work, we explore the potential of heating agents presenting different heating properties in the activation of a supported catalyst based on nickel nanoparticles (NPs) (Ni/SiRAlOx) for the CO2 methanation under continuous flow. Two types of Fe2.2C NPs presenting distinct heating properties have been tested. For Fe2.2C NPs displaying lower heating powers of ca. 1 kW g−1, an activation of the catalyst at a magnetic field amplitude of 80 mT is necessary to achieve high conversion and selectivity, this activation step being attributed to a partial sintering of the Ni NPs. When using Fe2.2C NPs displaying much higher heating powers of 2 kW g−1 as heating agents, the magnetic field amplitude required to activate the catalyst can be reduced to 48 mT. Finally, we demonstrate that hard magnetic materials displaying very low heating power but high Curie temperatures, such as Co nanorods (NRs), can be used as relay heating agents when mixed with small amounts of softer materials with high heating power. Thus, by mixing Co NRs with Fe2.2C NPs, excellent catalytic performances (90% of CO2 and 100% CH4 selectivity) have been obtained after applying only 32 mT to trigger the reaction. Once the reaction initiated, these performances are maintained even after lowering the magnetic field to 16 mT, which is advantageous in terms of energy consumption.