Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

hcp -Co Nanowires grown on metallic foams as catalysts for Fischer-Tropsch Synthesis

  • Harmel, Justine
  • Peres, Laurent
  • Estrader i Bofarull, Marta
  • Berliet, Adrien
  • Maury, Sylvie
  • Fécant, Antoine
  • Chaudret, Bruno
  • Serp, Philippe
  • Soulantica, Katerina
The Fischer-Tropsch synthesis (FTS) is a structure‐sensitive exothermic reaction that enables catalytic transformation of syngas to high quality liquid fuels. Now, monolithic cobalt‐based heterogeneous catalysts were elaborated through a wet chemistry approach that allows control over nanocrystal shape and crystallographic phase, while at the same time enables heat management. Copper and nickel foams have been employed as supports for the epitaxial growth of hcp‐Co nanowires directly from a solution containing a coordination compound of cobalt and stabilizing ligands. The Co/Cufoam catalyst was tested for Fischer-Tropsch synthesis in a fixed‐bed reactor, showing stability and significantly superior activity and selectivity towards C5+ compared to a Co/SiO2‐Al2O3 reference catalyst under the same conditions.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

A setup to measure the temperature-dependent heating power of magnetically heated nanoparticles up to high temperature.

  • Mille, N.
  • Faure, Stephane
  • Estrader i Bofarull, Marta
  • Yi, Deliang
  • Marbaix, Julien
  • De Masi, D.
  • Soulantica, Katerina
  • Millán, A.
  • Chaudret, Bruno
  • Carrey, J.
Magnetic heating, namely, the use of heat released by magnetic nanoparticles (MNPs) excited with a high-frequency magnetic field, has so far been mainly used for biological applications. More recently, it has been shown that this heat can be used to catalyze chemical reactions, some of them occurring at temperatures up to 700 °C. The full exploitation of MNP heating properties requires the knowledge of the temperature dependence of their heating power up to high temperatures. Here, a setup to perform such measurements is described based on the use of a pyrometer for high-temperature measurements and on a protocol based on the acquisition of cooling curves, which allows us to take into account calorimeter losses. We demonstrate that the setup permits to perform measurements under a controlled atmosphere on solid state samples up to 550 °C. It should in principle be able to perform measurements up to 900 °C. The method, uncertainties, and possible artifacts are described and analyzed in detail. The influence on losses of putting under vacuum different parts of the calorimeter is measured. To illustrate the setup possibilities, the temperature dependence of heating power is measured on four samples displaying very different behaviors. Their heating power increases or decreases with temperature, displaying temperature sensibilities ranging from -2.5 to +4.4% K-1. This setup is useful to characterize the MNPs for magnetically heated catalysis applications and to produce data that will be used to test models permitting to predict the temperature dependence of MNP heating power.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Iron carbide or iron carbide/cobalt nanoparticles for magnetically-induced CO2 hydrogenation over Ni/SiRAlOx catalysts

  • Kale, Sumeet S.
  • Asensio, Juan M.
  • Estrader i Bofarull, Marta
  • Werner, Mayke
  • Bordet, Alexis
  • Yi, Deliang
  • Marbaix, Julien
  • Fazzini, Pier Francesco
  • Soulantica, Katerina
  • Chaudret, Bruno
Magnetic nanoparticles have recently been used as heating agents in heterogeneously catalyzed reactions such as CO2 hydrogenation into methane. In the present work, we explore the potential of heating agents presenting different heating properties in the activation of a supported catalyst based on nickel nanoparticles (NPs) (Ni/SiRAlOx) for the CO2 methanation under continuous flow. Two types of Fe2.2C NPs presenting distinct heating properties have been tested. For Fe2.2C NPs displaying lower heating powers of ca. 1 kW g−1, an activation of the catalyst at a magnetic field amplitude of 80 mT is necessary to achieve high conversion and selectivity, this activation step being attributed to a partial sintering of the Ni NPs. When using Fe2.2C NPs displaying much higher heating powers of 2 kW g−1 as heating agents, the magnetic field amplitude required to activate the catalyst can be reduced to 48 mT. Finally, we demonstrate that hard magnetic materials displaying very low heating power but high Curie temperatures, such as Co nanorods (NRs), can be used as relay heating agents when mixed with small amounts of softer materials with high heating power. Thus, by mixing Co NRs with Fe2.2C NPs, excellent catalytic performances (90% of CO2 and 100% CH4 selectivity) have been obtained after applying only 32 mT to trigger the reaction. Once the reaction initiated, these performances are maintained even after lowering the magnetic field to 16 mT, which is advantageous in terms of energy consumption.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A setup to measure the temperature-dependent heating power of magnetically heated nanoparticles up to high temperature

  • Mille, N.
  • Faure, Sébastien
  • Estrader, Marta
  • Yi, Di
  • Masi, Dante
  • Soulantica, Katerina
  • Millán, Ángel
  • Chaudret, Bruno
  • Carrey, J.
Magnetic heating, namely, the use of heat released by magnetic nanoparticles (MNPs) excited with a high-frequency magnetic field, has so far been mainly used for biological applications. More recently, it has been shown that this heat can be used to catalyze chemical reactions, some of them occurring at temperatures up to 700 °C. The full exploitation of MNP heating properties requires the knowledge of the temperature dependence of their heating power up to high temperatures. Here, a setup to perform such measurements is described based on the use of a pyrometer for high-temperature measurements and on a protocol based on the acquisition of cooling curves, which allows us to take into account calorimeter losses. We demonstrate that the setup permits to perform measurements under a controlled atmosphere on solid state samples up to 550 °C. It should in principle be able to perform measurements up to 900 °C. The method, uncertainties, and possible artifacts are described and analyzed in detail. The influence on losses of putting under vacuum different parts of the calorimeter is measured. To illustrate the setup possibilities, the temperature dependence of heating power is measured on four samples displaying very different behaviors. Their heating power increases or decreases with temperature, displaying temperature sensibilities ranging from -2.5 to +4.4% K-1. This setup is useful to characterize the MNPs for magnetically heated catalysis applications and to produce data that will be used to test models permitting to predict the temperature dependence of MNP heating power., The authors acknowledge the ERC Advanced Grant (No. MONACAT 2015-694159). M.E. acknowledges the European Union’s Horizon 2020 research and innovation programme (Marie Skłodowska-Curie Grant Agreement No. 704098) for the execution of the project related to this article and the Spanish MICINN for the current Ramón y Cajal Contract (No. RYC2018-024396-I). D.Y. acknowledges the financial support of the “CaSh” project through EUR Grant NanoX No. ANR-17-EURE-0009 in the framework of the “Programme des Investissements d’Avenir.”
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A setup to measure the temperature-dependent heating power of magnetically heated nanoparticles up to high temperature.

  • Mille, N.
  • Faure, Stephane
  • Estrader i Bofarull, Marta
  • Yi, Deliang
  • Marbaix, Julien
  • De Masi, D.
  • Soulantica, Katerina
  • Millán, A.
  • Chaudret, Bruno
  • Carrey, J.
Magnetic heating, namely, the use of heat released by magnetic nanoparticles (MNPs) excited with a high-frequency magnetic field, has so far been mainly used for biological applications. More recently, it has been shown that this heat can be used to catalyze chemical reactions, some of them occurring at temperatures up to 700 °C. The full exploitation of MNP heating properties requires the knowledge of the temperature dependence of their heating power up to high temperatures. Here, a setup to perform such measurements is described based on the use of a pyrometer for high-temperature measurements and on a protocol based on the acquisition of cooling curves, which allows us to take into account calorimeter losses. We demonstrate that the setup permits to perform measurements under a controlled atmosphere on solid state samples up to 550 °C. It should in principle be able to perform measurements up to 900 °C. The method, uncertainties, and possible artifacts are described and analyzed in detail. The influence on losses of putting under vacuum different parts of the calorimeter is measured. To illustrate the setup possibilities, the temperature dependence of heating power is measured on four samples displaying very different behaviors. Their heating power increases or decreases with temperature, displaying temperature sensibilities ranging from -2.5 to +4.4% K-1. This setup is useful to characterize the MNPs for magnetically heated catalysis applications and to produce data that will be used to test models permitting to predict the temperature dependence of MNP heating power.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Iron carbide or iron carbide/cobalt nanoparticles for magnetically-induced CO2 hydrogenation over Ni/SiRAlOx catalysts

  • Kale, Sumeet S.
  • Asensio, Juan M.
  • Estrader i Bofarull, Marta
  • Werner, Mayke
  • Bordet, Alexis
  • Yi, Deliang
  • Marbaix, Julien
  • Fazzini, Pier Francesco
  • Soulantica, Katerina
  • Chaudret, Bruno
Magnetic nanoparticles have recently been used as heating agents in heterogeneously catalyzed reactions such as CO2 hydrogenation into methane. In the present work, we explore the potential of heating agents presenting different heating properties in the activation of a supported catalyst based on nickel nanoparticles (NPs) (Ni/SiRAlOx) for the CO2 methanation under continuous flow. Two types of Fe2.2C NPs presenting distinct heating properties have been tested. For Fe2.2C NPs displaying lower heating powers of ca. 1 kW g−1, an activation of the catalyst at a magnetic field amplitude of 80 mT is necessary to achieve high conversion and selectivity, this activation step being attributed to a partial sintering of the Ni NPs. When using Fe2.2C NPs displaying much higher heating powers of 2 kW g−1 as heating agents, the magnetic field amplitude required to activate the catalyst can be reduced to 48 mT. Finally, we demonstrate that hard magnetic materials displaying very low heating power but high Curie temperatures, such as Co nanorods (NRs), can be used as relay heating agents when mixed with small amounts of softer materials with high heating power. Thus, by mixing Co NRs with Fe2.2C NPs, excellent catalytic performances (90% of CO2 and 100% CH4 selectivity) have been obtained after applying only 32 mT to trigger the reaction. Once the reaction initiated, these performances are maintained even after lowering the magnetic field to 16 mT, which is advantageous in terms of energy consumption.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

hcp -Co Nanowires grown on metallic foams as catalysts for Fischer-Tropsch Synthesis

  • Harmel, Justine
  • Peres, Laurent
  • Estrader i Bofarull, Marta
  • Berliet, Adrien
  • Maury, Sylvie
  • Fécant, Antoine
  • Chaudret, Bruno
  • Serp, Philippe
  • Soulantica, Katerina
The Fischer-Tropsch synthesis (FTS) is a structure‐sensitive exothermic reaction that enables catalytic transformation of syngas to high quality liquid fuels. Now, monolithic cobalt‐based heterogeneous catalysts were elaborated through a wet chemistry approach that allows control over nanocrystal shape and crystallographic phase, while at the same time enables heat management. Copper and nickel foams have been employed as supports for the epitaxial growth of hcp‐Co nanowires directly from a solution containing a coordination compound of cobalt and stabilizing ligands. The Co/Cufoam catalyst was tested for Fischer-Tropsch synthesis in a fixed‐bed reactor, showing stability and significantly superior activity and selectivity towards C5+ compared to a Co/SiO2‐Al2O3 reference catalyst under the same conditions.