Pasar al contenido principal

ROBOTICA EN LA NUBE Y EL IMPACTO DE LAS REDES 5G EN LA FABRICA DEL FUTURO

RTI2018-099880-B-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

V2X Support in 3GPP Specifications: from 4G to 5G and Beyond

  • Garcia-Roger, David
  • González-Malla, Edgar Emanuel
  • Martín-Sacristán, David|||0000-0002-7781-557X
  • Monserrat del Río, Jose Francisco|||0000-0001-8664-6408
[EN] The connected car concept is gaining momentum from the point of view, not only of research, but also of standardization and industrial development. Today there are many options for connecting a vehicle, in terms of to whom and how. In addition to making use of any conventional cellular technology, and connecting the vehicle to a base station or infrastructure element, vehicles can connect wirelessly and directly to each other using different technologies, both from the Institute of Electrical and Electronics Engineers (IEEE) and from the 3rd Generation Partnership Project (3GPP). This article offers a rigorous and detailed review of the system architecture aspects involved in the support of vehicular communications by the 3GPP fifth-generation (5G) standard, with special emphasis on its most recent iteration: Release 16., This work was supported in part by the European Union s H2020 project 5G-CARMEN under Grant 825012, and in part by the Ministerio de Ciencia e Innovación under Grant RTI2018-099880-B-C31.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Received power modelling in ultra-dense networks

  • Prado-Alvarez, Danaisy|||0000-0003-3781-5951
  • Calabuig Soler, Daniel|||0000-0003-0611-9902
  • Monserrat del Río, Jose Francisco|||0000-0001-8664-6408
  • Antón, Alejandro
  • Bazzi, Samer
  • Xu, Wen
[EN] In received power modelling for system level simulations, the relative orientation of the transmitter and receiver antennas are not generally considered. By doing that, a constant gain of the receiver antenna, independently of the angle of arrival, is implicitly assumed. This is usually of minor relevance for small or low-dense scenarios. However, in ultra-dense deployments, especially those based on cell-free massive multiple-input¿multiple-output architectures where users interact with all access points, the consideration of the antennas relative orientation comes to the forefront. In this paper, the impact of whether to take the receiver antenna gain into account or not for ultra-dense indoor environments with ceiling-mounted antennas are studied. A simple approach to take this gain into account using the antenna effective area is provided. Finally, this approach is compared with that based on antenna radiation patterns., The work of Danaisy Prado was supported by the H2020 Marie Curie Program, with Project Grant No. 766231 WAVECOMBE - ITN - 2017. This was also supported by the Spanish Ministry of Science, Innovation and University under the project RTI2018-099880-B-C31.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Key Technologies for the Advent of the 6G

  • Monserrat del Río, Jose Francisco|||0000-0001-8664-6408
  • Martín-Sacristán, David|||0000-0002-7781-557X
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
  • Flores De Valgas, Josué
  • Bouchmal, Faiza
  • Carrasco, Óscar
[EN] True, the scientific community still has a lot to investigate on how to get 5G to have a satisfactory journey in the development of standards. However, it is now that we must begin to glimpse the future of mobile technology, it is time to imagine what 6G will be. This paper offers a realistic view of what this technology might be. In this case, the experience of one of the most important groups in Europe dedicated to the mobile communication systems design, the iTEAM research institute, is combined with the one of the world's leading manufacturers of femtocells, Casa Systems. From the belief that the deployment of SG will come from homes, this paper analyzes the new use cases of the 6G, as well as the three technological pillars of this future technology., This work was supported by the Spanish Ministry of Science, Innovation and University under the project RTI2018-099880-B-C31.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Millimeter-wave Human Blockage Model Enhancements for Directional Antennas and Multiple Blockers

  • Prado-Alvarez, Danaisy|||0000-0003-3781-5951
  • Inca-Sánchez, Saúl Adrián
  • Martín-Sacristán, David|||0000-0002-7781-557X
  • Monserrat del Río, Jose Francisco|||0000-0001-8664-6408
[EN] The Third Generation Partnership Project (3GPP) has defined a blockage model as an add-on feature to the channel model used in its evaluations of the physical layer in the 0.5-100 GHz frequency range. This letter focuses on the human body blockage losses in the millimeter-wave band proposing: (i) a new criterion to place the diffraction points over the edges of the blockers that considers the precise position of the blocker with regard to the line-of-sight between the transmitter and the receiver, (ii) a specific criterion to determine which potential blockers, from a set of human bodies present in a certain scenario, should be considered effective blockers given the positions of a transmitter, a receiver, and those bodies, and (iii) a modification of the model to provide more accurate estimations in the case in which several blockers are closely located. The validity of our criteria and the accuracy improvement are confirmed by a set of measurements performed at 30 GHz with directional antennas and with multiple human blockers in different positions., The work of Danaisy Prado-Alvarez was supported by the H2020 Marie Curie Program, with Project Grant No. 766231 WAVECOMBE-ITN-2017. Part of this work has been performed in the framework of the H2020 project 5G-SMART co-funded by the EU. This was also supported by the Spanish Ministry of Science, Innovation and University under the project RTI2018-099880-B-C31. The associate editor coordinating the review of this letter and approving it for publication was J. Choi.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Breathing on UWB Propagation Characteristics for Ingestible and Implantable Devices

  • Garcia-Pardo, Concepcion|||0000-0002-2774-980X
  • Fornés Leal, Alejandro|||0000-0001-5914-6045
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
  • Frasson, Matteo
  • Pons Beltran, Vicente
[EN] Wireless in-body devices are those in which a medical sensor is introduced-implanted or ingested- inside the human body and communicates with a remote node. Some in-body applications demand high data rates, so ultrawideband (UWB) spectrum has been proposed as a good candidate because of its large bandwidth available. Besides, breathing can lead to internal movement of the torso and consequently, of devices installed in this area. Thus, the radio channel performance can be affected by such movement leading to a malfunction of the radio interface of the medical device. This work aims at analyzing the effect of breathing on the propagation channel by means of in vivo measurements in living animal models. Continuous wave (CW) measurements have been carried out for live different frequencies in the lower part of the UWB band, and the effects of breathing on the relative received power (module and phase) are analyzed and discussed, This work was supported in part by the Ministerio de Ciencia e Innovacion under Grant RTI2018-099880-B-C31 and in part by the Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia through the Colorrectal Diagnosis of Tumours Based on EM Properties (COLODEM) Project under Grant PAID-06-18 (First Research Projects)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

6G Integrated Sensing and Communication System for the Factory of the Future

  • Ramos Pillasagua, Andrea Fernanda
[ES] El aprovechamiento de la tecnología de Quinta Generación (5G) para impulsar a la Industria 4.0 ha marcado un hito significativo en la evolución histórica de las redes celulares. Este desarrollo tiene como objetivo respaldar a las fábricas inteligentes con estrictos requisitos de comunicación, ya que su operatividad se centra en cumplir con los estándares de Calidad de Servicio (QoS), lo que hace que las aplicaciones del Industrial Internet de las cosas (IIoT) sean susceptibles a un rendimiento de red inestable. Además, estas aplicaciones suelen ocurrir en interiores, donde la alta densidad de obstáculos presenta desafíos adicionales. Estructuras metálicas grandes, robots y vehículos en movimiento obstruyen la propagación de la señal y pueden degradar significativamente el rendimiento de las comunicaciones. El primer modelo de canal estandarizado para fábricas interiores (InF) fue introducido por el Third Generation Partnership Project (3GPP) en la Release 16 para estudiar y abordar estas particularidades ambientales. Esta tesis se centra en esta base y examina el procedimiento de modelado, identificando limitaciones como la caracterización imprecisa de parámetros y la capacidad limitada para capturar toda la complejidad geométrica de tales entornos. Preocupado por estas limitaciones, este trabajo da un paso significativo hacia adelante al proponer una nueva tecnología para abordar los desafíos en el modelado industrial. Este enfoque abre la puerta a explorar una de las tendencias emergentes clave en la Sexta Generación (6G) para aplicaciones IIoT: los sistemas de Integrated Sensing and Communications (ISAC). Los sistemas ISAC tienen un gran potencial para superar no solo los desafíos existentes, sino también para introducir mejoras adicionales y valiosas. Dado que ISAC es una tecnología novedosa, aún no se ha diseñado un modelo de canal específico para ella. Para cubrir esta necesidad, esta tesis presenta el desarrollo de un modelo de canal ISAC como un paso fundamental para avanzar en esta tecnología. Durante dicho avance, se han identificado características fundamentales para construir un modelo de canal ISAC, las cuales suelen ser pasadas por alto en la literatura. En respuesta a esto, este trabajo motiva el desarrollo de directrices técnicas para el modelado ISAC, formando una metodología de evaluación. Una metodología de evaluación es importante para ISAC o cualquier sistema, ya que es esencial para evaluar el rendimiento y orientar futuras mejoras. Actualmente, no existe una metodología de este tipo para ISAC. Esta tesis aborda estos desafíos al enfatizar la importancia de considerar las características principales para construir un canal ISAC: correlación entre el canal de sensado y el de comunicación y consistencia espacial. Basándose en el desarrollo inicial del marco ISAC, el siguiente paso consiste en probar ISAC en entornos cuasi-realistas. Esta tesis presenta un caso de uso industrial que aplica entrenamiento de haz asistido por sensado, demostrando cómo ISAC puede abordar el problema de las múltiples obstrucciones en tales entornos. Específicamente, explora la técnica de sustracción de fondo en un algoritmo de formación de haces predictiva, que aprovecha la información relacionada con el usuario obtenida a través del sensado. Bajo estas consideraciones, los hallazgos indican una mejora sustancial en el rendimiento de la comunicación, particularmente en lo que respecta a la relación señal a ruido (SNR) y la tasa de datos efectiva. En otras palabras, los resultados destacan el potencial de ISAC para abordar eficazmente las complejidades geométricas del entorno de interés. Esta tesis no solo es pionera en la técnica de sustracción de fondo, sino que también muestra su impacto, allanando el camino para futuras aplicaciones a otros algoritmos de sensado dentro del marco ISAC y la fábrica del futuro., [CA] L'aprofitament de la tecnologia de Cinquena Generació (5G) per a impulsar la Indústria 4.0 ha marcat un fita significativa en l'evolució històrica de les xarxes cel·lulars. Aquest desenvolupament té com a objectiu donar suport a les fàbriques intel·ligents amb estrictes requisits de comunicació, ja que el seu funcionament depén de complir amb els estàndards de Qualitat de Servei (QoS), cosa que fa que les aplicacions de l'Internet Industrial de les Coses (IIoT) siguen susceptibles a un rendiment de xarxa inestable. A més, aquestes aplicacions solen produir-se en interiors, on la gran densitat d'obstacles presenta desafiaments addicionals. Grans estructures metàl·liques, robots i vehicles en moviment obstrueixen la propagació del senyal i poden degradar significativament el rendiment de les comunicacions. El primer model de canal estandarditzat per a fàbriques interiors (InF) va ser introduït pel Third Generation Partnership Project (3GPP) en la Release 16 per a estudiar i abordar aquestes particularitats ambientals. Aquesta tesi es centra en aquesta base i examina el procediment de modelatge, identificant limitacions com ara la caracterització imprecisa dels paràmetres i la capacitat limitada per a captar tota la complexitat geomètrica d'aquests entorns. Preocupat per aquestes limitacions, aquest treball fa un pas significatiu cap endavant en proposar una nova tecnologia per a abordar els desafiaments en el modelatge industrial. Aquest enfocament obri la porta a explorar una de les tendències emergents clau en la Sisena Generació (6G) per a aplicacions IIoT: els sistemes d'Integrated Sensing and Communications (ISAC). Els sistemes ISAC tenen un gran potencial per a superar no sols els desafiaments existents, sinó també per a introduir millores addicionals i valuoses. Com que ISAC és una tecnologia innovadora, encara no s'ha dissenyat un model de canal específic per a ella. Per a cobrir aquesta necessitat, aquesta tesi presenta el desenvolupament d'un model de canal ISAC com un pas fonamental per a avançar en aquesta tecnologia. En el marc d'aquest avanç, s'han identificat característiques fonamentals per a construir un model de canal ISAC, les quals solen ser passades per alt en la literatura. En resposta a això, aquest treball motiva el desenvolupament de directrius tècniques per al modelatge ISAC, formant una metodologia d'avaluació. Una metodologia d'avaluació és important per a ISAC o per a qualsevol sistema, ja que és essencial per avaluar el rendiment i orientar futures millores. Actualment, no existeix una metodologia d'aquest tipus per a ISAC. Aquesta tesi aborda aquests desafiaments en destacar la importància de considerar les característiques principals per a construir un canal ISAC: correlació entre el canal de sensat i el de comunicació i consistència espacial. Basant-se en el desenvolupament inicial del marc ISAC, el pas següent consisteix a provar ISAC en entorns quasi-realistes. Aquesta tesi presenta un cas d'ús industrial que aplica un entrenament de feix assistit per sensat, demostrant com ISAC pot abordar el problema de les múltiples obstruccions en aquests entorns. Específicament, explora la tècnica de sostracció de fons en un algoritme de formació de feixos predictiva, que aprofita la informació relacionada amb l'usuari obtinguda a través del sensat. Dins d'aquestes consideracions, les troballes indiquen una millora substancial en el rendiment de la comunicació, particularment pel que fa a la relació senyal-soroll (SNR) i la taxa de dades efectiva. En altres paraules, els resultats destaquen el potencial d'ISAC per a abordar eficaçment les complexitats geomètriques de l'entorn d'interés. Aquesta tesi no sols és pionera en la tècnica de sostracció de fons, sinó que també mostra el seu impacte, obrint el camí a futures aplicacions en altres algoritmes de sensat dins del marc ISAC i la fàbrica del futur., [EN] Leveraging Fifth Generation (5G) technology to advance Industry 4.0 has marked a significant milestone in the historical evolution of cellular networks. This development aims to support smart factories with stringent communication requirements, as their operation is focused on meeting Quality of Service (QoS) standards, making the Industrial Internet of Things (IIoT) applications susceptible to unstable network performance. Moreover, these applications frequently occur indoors, where high-density clutter poses additional challenges. Large metal structures, robots, and moving vehicles obstruct signal propagation and can significantly degrade communication performance. The first standardized channel model for Indoor Factory (InF) was introduced by the Third Generation Partnership Project (3GPP) in Release 16 to study and address these environmental particularities. This Thesis builds on this foundation and examines the modeling procedure, identifying limitations such as imprecise parameter characterization and a limited ability to capture the full geometric complexity of such environments. Concerned about these limitations, this work takes a significant step forward by proposing a new technology to address challenges in industrial modeling. This approach opens the door to exploring one of the key emerging trends in Sixth Generation (6G) for IIoT applications: Integrated Sensing and Communications (ISAC) systems. ISAC systems hold the promising potential to overcome not only existing challenges but also introduce additional, valuable enhancements. As ISAC is a novel technology, no channel model has been specifically designed for it so far. To fill this need, this Thesis presents the development of an ISAC channel model as a foundational step in advancing this technology. During this progress, fundamental features for building an ISAC channel model have been identified, which are often overlooked in the literature. In response, this work motivates the development of technical guidelines for ISAC modeling, forming an evaluation methodology. An evaluation methodology is important for ISAC or any system, as it is essential for assessing performance and guiding future upgrades. Such a methodology does not exist for ISAC. This Thesis tackles these challenges by emphasizing the importance of considering the main features to construct an ISAC channel: Correlation between the sensing and communication channel and spatial consistency. Building on the initial development of the ISAC framework, the next step involves testing ISAC in quasi-realistic environments. This Thesis presents an industrial use case that applies sensing-assisted beam training, demonstrating how ISAC can deal with the issue of multiple obstructions in such environments. Specifically, it explores the background subtraction technique in a predictive beamforming algorithm, which leverages target-related information obtained through sensing. Under these considerations, the findings indicate a substantial improvement in communication performance, particularly regarding signal-to-noise ratio (SNR) and effective data rate. In other words, the results highlight ISAC's potential to tackle the geometrical complexities of the environment of interest effectively. This Thesis not only pioneers the background subtraction technique but also showcases its impact, paving the way for future applications to other sensing algorithms within the framework of ISAC and the factory of the future., Thanks to the Spanish Ministry of Science, Innovation, and University, which funded this Thesis under Project Grant No. RTI2018-099880-B-C31