Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cell-Free Massive MIMO Power Consumption with Serial Front-Hauls

  • Prado-Alvarez, Danaisy|||0000-0003-3781-5951
  • Inca-Sánchez, Saúl Adrián
  • Martín-Sacristán, David|||0000-0002-7781-557X
  • Monserrat del Río, Jose Francisco|||0000-0001-8664-6408
[EN] Massive MIMO deployments have been traditionally based on dedicated links in the front-haul, i.e., between the central processing units and the Access Points (APs). Recently, cell-free massive Multiple-Input Multiple-Output (MIMO) systems based on serial front-haul links have been discussed to simplify the deployments, among other reasons. However, the power consumption models currently used for cell-free massive MIMO deployments typically assume dedicated front-haul links. This paper highlights the inaccuracy of these models when applied to serial front-hauls and proposes simple adaptations to achieve more realistic results. The results obtained for an exemplary scenario show that the front-haul power would represent 61.73% of the total consumed power with the original models. In contrast, with the proposed adaptations, it could be as low as 1.59% of the total consumed power for some serial front-haul configurations. Additionally, the impact of considering APs with lower power consumption is studied, in which case, the percentages above would become 93.15% and 11.96%, respectively. Hence the importance of having power models that fit the front-haul topology., The work of Danaisy Prado-Alvarez was supported by the H2020 Marie Curie Program, with Project Grant No. 766231 WAVECOMBE-ITN-2017. The APC was funded by UPV research funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Channel Modelling based on Game Engines Light Physics for mmW in Indoor Scenarios

  • Inca-Sánchez, Saúl Adrián
  • Prado-Alvarez, Danaisy|||0000-0003-3781-5951
  • Martín-Sacristán, David|||0000-0002-7781-557X
  • Monserrat del Río, Jose Francisco|||0000-0001-8664-6408
[EN] The importance of Millimeter Waves (mmW) band for the Fifth Generation (5G) of mobile and wireless communications has motivated a lot of work in mmW channel modelling. In this paper, we assess the use of the light physics modelling of a game engine to calculate the propagation losses at mmW band in an indoor scenario. With that aim, we propose a model that we refer to as Light Intensity Model (LIM), in which a detailed 3D scenario is created in a game engine, radio transmitters and receivers are replaced by light sources and detectors, and the received light intensities are translated to received radio signal power through a translation function which is the key of the model. The results obtained corroborate the validity of the assessed approach to model propagation losses in indoor scenarios, This work has been partially funded by MSCA Project 766231 WaveComBE. This work has also been partially performed in the framework of the H2020 project 5G-SMART co-funded by the EU. The authors would like to acknowledge the contributions of their colleagues. The views expressed are those of the authors and do not necessarily represent the project. The consortium is not liable for any use that may be made of any of the information contained therein.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Applicability Limits of Simplified Human Blockage Models at 5G mm-Wave Frequencies

  • Romero-Peña, Jhoan Samuel
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
This paper analyzes the feasibility of using a simple diffraction model to compute the blocking of the human body to millimeter wave radio frequencies in indoor environments. The model makes a set of approximations that are evaluated to determine the applicability limits of such simplified approach, in particular for the human body blockage case. The work presented here: (1) describes briefly the mathematical support that is used to model the concealment using the Knife-Edge model, (2) identifies the potential simplifications applicable to the mathematical model implementation that allow a 3D geometric human body to be modelled with simple 2D shapes, (3) characterizes the polarization influence on the mm-wave blocking for such simplified human body models., This work was supported by the H2020 Marie Curie program, with project grant no: 766231 WAVECOMBEITN-2017
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Initial Delay Domain UWB Channel Characterization for In-body Area Networks

  • Pérez-Simbor, Sofia
  • Garcia-Pardo, Concepcion|||0000-0002-2774-980X
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
Wireless Body Area Networks (WBANs) have increased the attention of the research community for the next generation wireless medical devices. Among others, Wireless Capsule Endoscopy (WCE) aims to transmit better quality images. For this, the Ultra Wideband (UWB) frequency band is becoming a good alternative to currently allocated frequencies for in-body networks, allowing higher data rate and having a low power transmission. Common channel characterization in WBANs are performed in frequency domain, i.e., analyzing the received power as a function of frequency. Nevertheless, indepth studies in delay domain analyzing the impulse response of the channel are barely considered in current literature. In this paper, an initial study in delay domain, i.e., the Power Delay Profile (PDP) characteristics, is performed. Moreover, a comparison between the channel response in frequency and delay domain is performed. This work gives an insightful view of the impulse response of the channel for in-body to on-body communications. For that, an extensive campaign of phantom measurements and software simulations are conducted., This work was supported by the European Union’s H2020:MSCA:ITN program for the ”Wireless In-body Environment Communication- WiBEC” project under the grant agreement no. 675353. This work was also funded by by the European Union’s H2020: MSCA: ITN program for the ”mmWave Communications in the Built Environments - WaveComBE” project under the grant agreement no. 766231.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Received power modelling in ultra-dense networks

  • Prado-Alvarez, Danaisy|||0000-0003-3781-5951
  • Calabuig Soler, Daniel|||0000-0003-0611-9902
  • Monserrat del Río, Jose Francisco|||0000-0001-8664-6408
  • Antón, Alejandro
  • Bazzi, Samer
  • Xu, Wen
[EN] In received power modelling for system level simulations, the relative orientation of the transmitter and receiver antennas are not generally considered. By doing that, a constant gain of the receiver antenna, independently of the angle of arrival, is implicitly assumed. This is usually of minor relevance for small or low-dense scenarios. However, in ultra-dense deployments, especially those based on cell-free massive multiple-input¿multiple-output architectures where users interact with all access points, the consideration of the antennas relative orientation comes to the forefront. In this paper, the impact of whether to take the receiver antenna gain into account or not for ultra-dense indoor environments with ceiling-mounted antennas are studied. A simple approach to take this gain into account using the antenna effective area is provided. Finally, this approach is compared with that based on antenna radiation patterns., The work of Danaisy Prado was supported by the H2020 Marie Curie Program, with Project Grant No. 766231 WAVECOMBE - ITN - 2017. This was also supported by the Spanish Ministry of Science, Innovation and University under the project RTI2018-099880-B-C31.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Human Body Scattering Effects at Millimeter Waves Frequencies for Future 5G Systems and Beyond

  • Romero-Peña, Jhoan Samuel
[ES] Se espera que las futuras comunicaciones móviles experimenten una revolución técnica que vaya más allá de las velocidades de datos de Gbps y reduzca las latencias de las velocidades de datos a niveles muy cercanos al milisegundo. Se han investigado nuevas tecnologías habilitadoras para lograr estas exigentes especificaciones. Y la utilización de las bandas de ondas milimétricas, donde hay mucho espectro disponible, es una de ellas. Debido a las numerosas dificultades técnicas asociadas a la utilización de esta banda de frecuencias, se necesitan complicados modelos de canal para anticipar las características del canal de radio y evaluar con precisión el rendimiento de los sistemas celulares en milimétricas. En concreto, los modelos de propagación más precisos son los basados en técnicas de trazado de rayos deterministas. Pero estas técnicas tienen el estigma de ser computacionalmente exigentes, y esto dificulta su uso para caracterizar el canal de radio en escenarios interiores complejos y dinámicos. La complejidad de la caracterización de estos escenarios depende en gran medida de la interacción del cuerpo humano con el entorno radioeléctrico, que en las ondas milimétricas suele ser destructiva y muy impredecible. Por otro lado, en los últimos años, la industria de los videojuegos ha desarrollado potentes herramientas para entornos hiperrealistas, donde la mayor parte de los avances en esta emulación de la realidad tienen que ver con el manejo de la luz. Así, los motores gráficos de estas plataformas se han vuelto cada vez más eficientes para manejar grandes volúmenes de información, por lo que son ideales para emular el comportamiento de la propagación de las ondas de radio, así como para reconstruir un escenario interior complejo. Por ello, en esta Tesis se ha aprovechado la capacidad computacional de este tipo de herramientas para evaluar el canal radioeléctrico milimétricas de la forma más eficiente posible. Esta Tesis ofrece unas pautas para optimizar la propagación de la señal en milimétricas en un entorno interior dinámico y complejo, para lo cual se proponen tres objetivos principales. El primer objetivo es evaluar los efectos de dispersión del cuerpo humano cuando interactúa con el canal de propagación. Una vez evaluado, se propuso un modelo matemático y geométrico simplificado para calcular este efecto de forma fiable y rápida. Otro objetivo fue el diseño de un reflector pasivo modular en milimétricas, que optimiza la cobertura en entornos de interior, evitando la interferencia del ser humano en la propagación. Y, por último, se diseñó un sistema de apuntamiento del haz predictivo en tiempo real, para que opere con el sistema de radiación en milimétricas, cuyo objetivo es evitar las pérdidas de propagación causadas por el cuerpo humano en entornos interiores dinámicos y complejos., [CA] S'espera que les futures comunicacions mòbils experimenten una revolució tècnica que vaja més enllà de les velocitats de dades de Gbps i reduïsca les latències de les velocitats de dades a nivells molt pròxims al milisegundo. S'han investigat noves tecnologies habilitadoras per a aconseguir estes exigents especificacions. I la utilització de les bandes d'ones millimètriques, on hi ha molt espectre disponible, és una d'elles. A causa de les nombroses dificultats tècniques associades a la utilització d'esta banda de freqüències, es necessiten complicats models de canal per a anticipar les característiques del canal de ràdio i avaluar amb precisió el rendiment dels sistemes cellulars en millimètriques. En concret, els models de propagació més precisos són els basats en tècniques de traçat de rajos deterministes. Però estes tècniques tenen l'estigma de ser computacionalment exigents, i açò dificulta el seu ús per a caracteritzar el canal de ràdio en escenaris interiors complexos i dinàmics. La complexitat de la caracterització d'estos escenaris depén en gran manera de la interacció del cos humà amb l'entorn radioelèctric, que en les ones millimètriques sol ser destructiva i molt impredicible. D'altra banda, en els últims anys, la indústria dels videojocs ha desenrotllat potents ferramentes per a entorns hiperrealistes, on la major part dels avanços en esta emulació de la realitat tenen a veure amb el maneig de la llum. Així, els motors gràfics d'estes plataformes s'han tornat cada vegada més eficients per a manejar grans volums d'informació, per la qual cosa són ideals per a emular el comportament de la propagació de les ones de ràdio, així com per a reconstruir un escenari interior complex. Per això, en esta Tesi s'ha aprofitat la capacitat computacional d'este tipus de ferramentes per a avaluar el canal radioelèctric millimètriques de la manera més eficient possible. Esta Tesi oferix unes pautes per a optimitzar la propagació del senyal en millimètriques en un entorn interior dinàmic i complex, per a la qual cosa es proposen tres objectius principals. El primer objectiu és avaluar els efectes de dispersió del cos humà quan interactua amb el canal de propagació. Una vegada avaluat, es va proposar un model matemàtic i geomètric simplificat per a calcular este efecte de forma fiable i ràpida. Un altre objectiu va ser el disseny d'un reflector passiu modular en millimètriques, que optimitza la cobertura en entorns d'interior, evitant la interferència del ser humà en la propagació, per a així evitar pèrdues de propagació addicionals. I, finalment, es va dissenyar un sistema d'apuntament del feix predictiu en temps real, perquè opere amb el sistema de radiació en millimètriques, l'objectiu del qual és evitar les pèrdues de propagació causades pel cos humà en entorns interiors dinàmics i complexos., [EN] Future mobile communications are expected to experience a technical revolution that goes beyond Gbps data rates and reduces data rate latencies to levels very close to a millisecond. New enabling technologies have been researched to achieve these demanding specifications. The utilization of mmWave bands, where a lot of spectrum is available, is one of them. Due to the numerous technical difficulties associated with using this frequency band, complicated channel models are necessary to anticipate the radio channel characteristics and to accurately evaluate the performance of cellular systems in mmWave. In particular, the most accurate propagation models are those based on deterministic ray tracing techniques. But these techniques have the stigma of being computationally intensive, and this makes it difficult to use them to characterize the radio channel in complex and dynamic indoor scenarios. The complexity of characterizing these scenarios depends largely on the interaction of the human body with the radio environment, which at mmWaves is often destructive and highly unpredictable. On the other hand, in recent years, the video game industry has developed powerful tools for hyper-realistic environments, where most of the progress in this reality emulation has to do with the handling of light. Therefore, the graphic engines of these platforms have become more and more efficient to handle large volumes of information, becoming ideal to emulate the radio wave propagation behavior, as well as to reconstruct a complex interior scenario. Therefore, in this Thesis one has taken advantage of the computational capacity of this type of tools to evaluate the mmWave radio channel in the most efficient way possible. This Thesis offers some guidelines to optimize the signal propagation in mmWaves in a dynamic and complex indoor environment, for which three main objectives are proposed. The first objective has been to evaluate the scattering effects of the human body when it interacts with the propagation channel. Once evaluated, a simplified mathematical and geometrical model has been proposed to calculate this effect in a reliable and fast way. Another objective has been the design of a modular passive reflector in mmWaves, which optimizes the coverage in indoor environments, avoiding human interference in the propagation, in order to avoid its harmful scattering effects. And finally, a real-time predictive beam steering system has been designed for the mmWaves radiation system, in order to avoid propagation losses caused by the human body in dynamic and complex indoor environments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Irregular MultiFocal Reflector for Efficient mmWave Propagation in Indoor Enviroments

  • Romero-Peña, Jhoan Samuel
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
[EN] In future implementations of 5G systems , it isessential the use of the spectrum in the range of mm-Wavesfrequencies , in order to offer to the users the bandwidthproposed in the standard. However , using this frequency rangelead to many technical difficulties in which the most importantchallenge is the critical attenuation of the signal in non-line-of-sight (NLOS) environments in indoor environments. Therefore isessential to plan strategies that allow us to mitigate the problemof signal attenuation in this kind of complex environments andensure the viability of using this technology in short term. Thenthe objective of this research is the design of a passive reflectorthat allow us to redirect the energy of the transmitting antennaefficiently in order to avoid the obstacles of the environment ,and therefore avoid excessive losses ., This work was supported by the H2020 Marie Curie program, with project grant no: 766231 WAVECOMBE-ITN2017
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Doppler Characterization in Ultra Wideband BAN Channels During Breathing

  • García-Serna, Rubén Gregorio
  • Molina-García-Pardo, José María
  • JUAN LLACER, LEANDRO
  • Garcia-Pardo, Concepcion|||0000-0002-2774-980X
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
[EN] Monitoring the physical parameters from devices inside the body, using ultra wideband (UWB) technology, enables the development of high bandwidth demanding applications in real time. The relative movement of the nodes deployed in the body, due to breathing, can give rise to a frequency shifting effect, increasing the fading level in the propagation channel during transmissions. In this article, therefore, we present a study of the frequency effects on the propagation channel derived from the relative movement between two nodes of a wireless body area network (WBAN), at least one of them placed inside the human body, caused by breathing. The study is performed on the basis of the Doppler spectrum characterization in terms of the shape fitting and frequency spread parameter derivation. Continuous wave (CW) signals have been used to cover the UWB range at four selected frequencies: 3.1, 4.8, 6, and 8.5 GHz, and a liquid phantom has been employed for emulating the dielectric properties of the high water content tissues at the considered UWB frequencies., This work was supported in part by the Ministerio de Economia y Competitividad (MINECO), Spain, under Grant TEC2016-78028-C3-2-P, in part by the European Union's H2020-MSCA-ITN Program by the "mmWave Communications in the Built Environments-WaveComBE" Project, under Grant 766231, and in part by the European FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Analysis of the Localization Error for Capsule Endoscopy Applications at UWB Frequencies

  • Barbi, Martina
  • Pérez-Simbor, Sofia
  • Garcia-Pardo, Concepcion|||0000-0002-2774-980X
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
Localization for Wireless Capsule Endoscopy (WCE) in the Ultra-Wideband frequency band is a very active field of investigation due to its potential advantages in future endoscopy applications. Received Signal Strength (RSS) based localization is commonly preferred due to its simplicity. Previous studies on Ultra-Wideband (UWB) RSS-based localization showed that the localization accuracy depends on the average ranging error related to the selected combination of receivers, which not always is the one experiencing the highest level of received power. In this paper the tendency of the localization error is further investigated through supplementary software simulations and previously conducted laboratory measurements. Two-dimensional (2D) and three-dimensional (3D) positioning are performed and the trend of the localization error compared in both cases. Results shows that the distribution of the selected path loss values, corresponding to the receivers used for localization, around the in-body position to estimate also affects the localization accuracy., This work was supported by the H2020:MSCA:ITN program for the “Wireless In-body Environment Communication- WiBEC” project under the grant agreement no. 675353. This work was also supported by the European Union’s H2020:MSCA:ITN program for the ”mmWave Communications in the Built Environments - WaveComBE” project under the grant agreement no. 766231.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Comparison of Optimization Methods for Aerial Base Station Placement with Users Mobility

  • Prado-Alvarez, Danaisy|||0000-0003-3781-5951
  • Inca-Sánchez, Saúl Adrián
  • Martín-Sacristán, David|||0000-0002-7781-557X
  • Monserrat del Río, Jose Francisco|||0000-0001-8664-6408
Aerial base stations have been recently considered in the deployment of wireless networks. Finding the optimal position for one or multiple aerial base stations is a complex problem tackled by several works. However, just a few works consider the mobility of the users which makes necessary an online optimization to follow the changes in the scenario where the optimization is performed. This paper deals with the online optimization of an aerial base station placement considering different types of users mobility and three algorithms: a Q-learning technique, a Gradient-based solution and a Greedy-search solution. Our objective is to minimize in an urban environment the path loss of the user at street level with the highest path loss. Simulation results show that the performance of the three methods is similar when a high number of users move randomly and uniformly around the scenario under test. Nevertheless, in some situations when the number of users is reduced or when the users move together in a similar direction, both Gradient and Greedy algorithms present a significantly better performance than the Q-learning method., The work of Danaisy Prado was supported by the H2020 Marie Curie Program, with Project Grant No. 766231 WAVECOMBE - ITN - 2017
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Study of Feasible Cell-Free Massive MIMO Systems in Realistic Indoor Scenarios

  • Prado-Alvarez, Danaisy|||0000-0003-3781-5951
[ES] El uso masivo de las telecomunicaciones exige redes de mayor capacidad. Esta capacidad puede incrementarse de las siguientes maneras: aumentando el número de antenas, el ancho de banda, la eficiencia espectral o una combinación de ellas. En respuesta a esto, han surgido los sistemas masivos MIMO sin celdas. Estos sistemas pretenden ofrecer un servicio ubicuo y fiable, apoyándose en un número masivo de antenas y adaptando la red a las necesidades de los usuarios en cada momento. Se han estudiado sistemas MIMO masivos sin celdas tanto para frecuencias inferiores a 6 GHz como en la banda mmW, demostrando ser una buena alternativa a las celdas pequeñas. Sin embargo, hay muchas cuestiones que todavía requieren más estudio. Esta Tesis aborda las cuestiones relativas a los despliegues masivos MIMO sin celdas en términos de escalabilidad, consumo de energía, modelado realista de los escenarios de despliegue y diseño de precodificadores para dichos escenarios en la banda mmW. Los sistemas masivos sin celdas en su forma canónica consideran que todos los APs están conectados a una única CPU y que todos ellos sirven a todos los UEs al mismo tiempo. Sin embargo, en la práctica, tal sistema no es factible debido a temas de escalabilidad. Por ello, en esta Tesis se estudian y proponen diferentes soluciones de agrupación que alivian la carga tanto de cada AP individual como de la CPUs, ya que la carga total de procesamiento se divide entre ellas. Las soluciones propuestas muestran un mejor rendimiento que la solución del estado del arte estudiada para todos los tamaños de agrupación considerados e independientemente del número de UEs en el escenario. Tras las consideraciones sobre la topología lógica de la red, esta Tesis analiza el impacto en el rendimiento de la red de diferentes configuraciones de topologías físicas. En concreto, se estudia el modelado del consumo de energía considerando front-haul totalmente dedicado, híbrido y totalmente en serie. En este sentido, se sugieren algunas modificaciones al modelo tradicional de consumo de energía para obtener resultados más precisos cuando se analizan entornos en serie. A partir de los resultados obtenidos, se destaca la importancia de aplicar las modificaciones propuestas que consideran el ahorro de energía debido a las conexiones serie en un despliegue de MIMO masivo sin celdas donde cada AP transmite la misma información (excepto por los coeficientes de precodificación). Por otro lado, aunque en la banda milimétrica se dispone de mayores anchos de banda, el uso de estas frecuencias conlleva ciertos retos. Uno de estos retos es el modelado del canal radioeléctrico, ya que al trabajar con longitudes de onda del orden de decenas de milímetros cualquier objeto o rugosidad del mismo puede afectar a la propagación de la onda. En este sentido, esta Tesis, en primer lugar, propone algunas adaptaciones al modelo de bloqueo del cuerpo humano del 3GPP. Los resultados obtenidos tras las modificaciones se acercan más a los valores de las mediciones reales, lo que hace que el modelo adaptado sea más preciso para la consideración del bloqueo corporal en mmW. En segundo lugar, esta Tesis presenta una herramienta de simulación de radiocanales basada en el trazado de rayos. Se han obtenido resultados de pérdidas de trayecto para un escenario de interior que se aproximan notablemente a las medidas reales. Asimismo, los resultados obtenidos muestran que cuando no se modelan correctamente las características electromagnéticas de los materiales o no se tiene en cuenta el mobiliario en un escenario de interior, los resultados pueden diferir considerablemente de las medidas reales. Por último, esta Tesis aborda el diseño de precodificadores en sistemas MIMO masivos sin celdas en un escenario realista. Para ello, se considera un escenario industrial con requerimientos de potencia específicos. En particular, se resuelve un problema de optimización con diferentes restricciones de potencia por antena., [CA] L'ús massiu de les telecomunicacions exigeix xarxes de major capacitat. Aquesta capacitat pot incrementar-se de les següents maneres: augmentant el nombre d'antenes, l'amplada de banda, l'eficiència espectral o una combinació d'elles. En resposta a això, han sorgit els sistemes massius MIMO sense cel·les. Aquests sistemes pretenen oferir un servei ubic i fiable, secundant-se en un nombre massiu d'antenes i adaptant la xarxa a les necessitats dels usuaris a cada moment. S'han estudiat sistemes MIMO massius sense cel·les tant per a freqüències inferiors a 6 GHz com en la banda mmW, demostrant ser una bona alternativa a les cel·les xicotetes. No obstant això, hi ha moltes qüestions que encara requereixen més estudi. Aquesta Tesi aborda les qüestions relatives als desplegaments massius MIMO sense cel·les en termes d'escalabilitat, consum d'energia, modelatge realista dels escenaris de desplegament i disseny de precodificadors per a aquests escenaris en la banda mmW. Els sistemes massius sense cel·les en la seua forma canònica consideren que tots els APs estan connectats a una única CPU i que tots ells serveixen a tots els UEs al mateix temps. No obstant això, en la pràctica, tal sistema no és factible a causa de temes d'escalabilitat. Per això, en aquesta Tesi s'estudien i proposen diferents solucions d'agrupació que alleugen la càrrega tant de cada AP individual com de la CPUs, ja que la càrrega total de processament es divideix entre elles. Les solucions proposades mostren un millor rendiment que la solució de l'estat de l'art estudiada per a totes les grandàries d'agrupació considerats i independentment del número de UEs en l'escenari. Després de les consideracions sobre la topologia lògica de la xarxa, aquesta Tesi analitza l'impacte en el rendiment de la xarxa de diferents configuracions de topologies físiques. En concret, s'estudia el modelatge del consum d'energia considerant front-haul totalment dedicat, híbrid i totalment en sèrie. En aquest sentit, se suggereixen algunes modificacions al model tradicional de consum d'energia per a obtindre resultats més precisos quan s'analitzen entorns en sèrie. A partir dels resultats obtinguts, es destaca la importància d'aplicar les modificacions proposades que consideren l'estalvi d'energia a causa de les connexions serie en un desplegament de MIMO massiva sense cel·les on cada AP transmet la mateixa informació (excepte pels coeficients de precodificació). D'altra banda, encara que en la banda mil·limètrica es disposa de majors amplades de banda, l'ús d'aquestes freqüències comporta uns certs reptes. Un d'aquests reptes és el modelatge del canal radioelèctric, ja que en treballar amb longituds d'ona de l'ordre de desenes de mil·límetres qualsevol objecte o rugositat del mateix pot afectar la propagació de l'ona. En aquest sentit, aquesta Tesi, en primer lloc, proposa algunes adaptacions al model de bloqueig del cos humà del 3GPP. Els resultats obtinguts després de les modificacions s'acosten més als valors dels mesuraments reals, la qual cosa fa que el model adaptat siga més precís per a la consideració del bloqueig corporal en mmW. En segon lloc, aquesta Tesi presenta una eina de simulació de radiocanales basada en el traçat de raigs. S'han obtingut resultats de pèrdues de trajecte per a un escenari d'interior que s'aproximen notablement a les mesures reals. Així mateix, els resultats obtinguts mostren que quan no es modelen correctament les característiques electromagnètiques dels materials o no es té en compte el mobiliari en un escenari d'interior, els resultats poden diferir considerablement de les mesures reals. Finalment, aquesta Tesi aborda el disseny de precodificadors en sistemes MIMO massius sense cel·les en un escenari realista. Per a això, es considera un escenari industrial amb requeriments de potència específics. En particular, es resol un problema d'optimització amb diferents restriccions de potència per antena., [EN] The massive use of telecommunications demands higher capacity networks. This capacity can be increased by increasing the number of antennas, bandwidth, spectral efficiency, or a combination of these. In response to this, cell-free massive MIMO systems have emerged. These systems aim to offer a ubiquitous and reliable service, relying on a massive number of antennas and adapting the network to users' needs. Cell-free massive MIMO systems have been studied both for frequencies below 6 GHz and in the mmW band, proving to be a good alternative to small cells. However, many issues still require further study. This Thesis addresses the issues concerning cell-free massive MIMO deployments in terms of scalability, power consumption, realistic modeling of deployment scenarios, and design of precoders for such scenarios in the mmW band. Cell-free massive systems in their canonical form consider that all the APs are connected to a single CPU and serve all UEs simultaneously. However, in practice, such a system is not feasible, due to scalability reasons. Therefore, in this Thesis, different clustering solutions that alleviate the load of both each individual AP and the CPUs, as the total processing load is divided among them, are studied and proposed. The proposed solutions show a better performance than the state-of-the-art solution studied for all cluster sizes considered and independently of the number of UEs in the scenario. After the logical network topology considerations, the impact on the network performance of different physical topologies configurations is analyzed. Specifically, the power consumption modeling considering fully dedicated, hybrid, and fully serial front-haul is studied. In this sense, some modifications are suggested for the traditional power consumption model in order to get more accurate results when serial environments are analyzed. The obtained results highlight the importance of applying the proposed modifications that consider the power savings due to the serial connections in a cell-free massive MIMO deployment where each AP transmits the same information (except by the precoding coefficients). On the other hand, although wider bandwidths are available in the millimeter band, the use of these frequencies brings certain challenges. One of these challenges is modeling the radio channel since when working with wavelengths in the order of tens of millimeters, any object or roughness of the same order can affect the propagation of the wave. Another challenge is to consider the electromagnetic impact of the human body at mmW frequencies. In this sense, this Thesis, firstly, proposes some adaptations to the 3GPP body blockage model. The results obtained after the modifications are closer to real measurement values, what makes the adapted model more accurate for the consideration of body blockage at mmW. Secondly, this Thesis presents a radio channel simulation tool based on ray tracing. With this tool, path loss results have been obtained for an indoor scenario that are remarkably close to the actual measurements. Also, the results show that when the electromagnetic characteristics of the materials are not modeled correctly or the furniture is not taken into account in an indoor scenario, the adjustment of the simulation results can differ considerably from the actual measurements. Finally, the design of precoders in cell-free massive MIMO systems in a realistic scenario is addressed. For this purpose, an industrial scenario with specific power requirements is considered. In particular, an optimization problem with different per-antenna power constraints is solved. In this case, the scenario and the radio channel are modeled using the above-mentioned tool. This fact makes it possible to find with high precision the power coefficients to be used by each transmitting antenna to transmit to each user so that the achieved data rate is maximized., I would like to thank the H2020 Marie Curie Program that has funded this thesis within Project Grant No. 766231 WAVECOMBE - ITN - 2017
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectric Characterization of In Vivo Abdominal and Thoracic Tissues in the 0.5 26.5 GHz Frequency Band for Wireless Body Area Networks

  • Fornés Leal, Alejandro|||0000-0001-5914-6045
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
  • Castelló-Palacios, Sergio|||0000-0003-4689-652X
  • Garcia-Pardo, Concepcion|||0000-0002-2774-980X
  • Frasson, Matteo
  • Nevárez, Andrea
  • PONS BELTRÁN, VICENTE
[EN] The dielectric properties of biological tissues are of utmost importance in the development of wireless body area networks (WBANs), especially for implanted devices. The early design stages of medical devices like capsule endoscopy, pacemakers, or physiological sensors rely on precise knowledge of the dielectric properties of the tissues present in their surrounding medium. Many of these applications make use of electromagnetic phantoms, which are software or physical models that imitate the shape and the electromagnetic properties of the tissues. They are used for designing devices in software simulations and for testing them in laboratory trials, aiding in both the development of WBAN antennas or in communication link evaluations. The existing reports about dielectric in vivo properties are limited and have drawbacks like: low variety of characterized tissues, lacking some relevant ones, and limitations and inhomogeneity in the measured frequency range. This paper aims at filling that gap by providing a new database of dielectric properties of biological tissues measured in vivo . In particular, it is focused on the tissues of the thoracic and the abdominal regions, measured at the same wide frequency band, on the same animal specimen, and under the same conditions. The properties have been obtained by measuring porcine tissues in the 0.5¿26.5 GHz band with the open-ended coaxial technique. In this paper, we focus on those tissues that have been scarcely characterized so far in the literature, like heart, esophagus, stomach, and pancreas. The Cole¿Cole fitting parameters of the measured tissues and their uncertainties are provided., This work was supported in part by UPV-IIS LaFe Program (STuDER, 2016, and EMOTE, 2018), in part by the Programa de Ayudas de Investigacion y Desarrollo (PAID-01-16) from the Universitat Politecnica de Valencia, in part by the European Union's H2020: MSCA: ITN Programs for the "Wireless In-Body Environment Communication-WiBEC'' Project, under Grant 675353, and in part by the "mmWave Communications in the Built Environments-WaveComBE'' Project, under Grant 766231.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Millimeter-wave Human Blockage Model Enhancements for Directional Antennas and Multiple Blockers

  • Prado-Alvarez, Danaisy|||0000-0003-3781-5951
  • Inca-Sánchez, Saúl Adrián
  • Martín-Sacristán, David|||0000-0002-7781-557X
  • Monserrat del Río, Jose Francisco|||0000-0001-8664-6408
[EN] The Third Generation Partnership Project (3GPP) has defined a blockage model as an add-on feature to the channel model used in its evaluations of the physical layer in the 0.5-100 GHz frequency range. This letter focuses on the human body blockage losses in the millimeter-wave band proposing: (i) a new criterion to place the diffraction points over the edges of the blockers that considers the precise position of the blocker with regard to the line-of-sight between the transmitter and the receiver, (ii) a specific criterion to determine which potential blockers, from a set of human bodies present in a certain scenario, should be considered effective blockers given the positions of a transmitter, a receiver, and those bodies, and (iii) a modification of the model to provide more accurate estimations in the case in which several blockers are closely located. The validity of our criteria and the accuracy improvement are confirmed by a set of measurements performed at 30 GHz with directional antennas and with multiple human blockers in different positions., The work of Danaisy Prado-Alvarez was supported by the H2020 Marie Curie Program, with Project Grant No. 766231 WAVECOMBE-ITN-2017. Part of this work has been performed in the framework of the H2020 project 5G-SMART co-funded by the EU. This was also supported by the Spanish Ministry of Science, Innovation and University under the project RTI2018-099880-B-C31. The associate editor coordinating the review of this letter and approving it for publication was J. Choi.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gel Phantoms for Body Microwave Propagation in the (2 to 26.5) GHz Frequency Band

  • Castelló-Palacios, Sergio|||0000-0003-4689-652X
  • Garcia-Pardo, Concepcion|||0000-0002-2774-980X
  • Fornés Leal, Alejandro|||0000-0001-5914-6045
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
  • Vallés Lluch, Ana|||0000-0002-7896-8666
  • Alloza-Pascual, María
[EN] Tissue phantoms are widely used for assessing the interaction between the electromagnetic waves and the human body. These are especially key in body area networks, where the body itself acts as the propagation medium since transmission is highly influenced by its diverse dielectric properties. Gels are suitable materials because of their high water content, which is required to mimic the dielectric properties of most tissues. In this paper, PHEA gels are suggested for achieving those properties due to their synthetic nature, which gives them the possibility to be swollen reversibly in more types of mixtures, in addition to water. These gels can be tailored to control the amount of liquid they embed so that they can imitate different body tissues in a wide bandwidth (2¿26.5 GHz), which includes most of the current mobile communication and medical bands. This versatility offers the chance to create heterogeneous models of particular regions of the body, and thus improve the test realism. In addition, they own better mechanical and stability properties than the widely used agar or gelatin., This work was supported in part by the Universitat Politecnica de Valencia-Institut d'Investigacio Sanitaria La Fe (UPV-IIS La Fe) Program [Early Stage Colon Tumour Diagnosis by Electromagnetic Reflection (STuDER), 2016 and Electromagnetic Probe for Early Tumour Detection (EMOTE), 2017], in part by the Universitat Politecnica de Valencia through the Programa de Ayudas de Investigacion y Desarrollo under Grant PAID-01-16, and in part by the European Union's H2020: MSCA: ITN Program for the "mmWave Communications in the Built Environments - WaveComBE" Project under Grant 766231.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Intelligent Design of mmWave Conference Networks in Built Environments

  • Drozdowska, Monika Krystyna|||0000-0002-3650-7802
[ES] Las redes inalámbricas interiores son una parte integral de las comunicaciones actuales. Debido a la alta demanda de confiabilidad y la enorme densidad de redes interiores, algunas de ellas están migrando hacia las frecuencias de onda milimétrica (mmW), donde están disponibles mayor ancho de banda y rendimiento. Diseñar la red para la banda mmW ofrece soluciones a algunos problemas presentes en frecuencias m 'as bajas pero también plantea nuevos desafíos. Esta Tesis se centra en particular en casos de uso de conferencias en entornos grandes. La principal funcionalidad de la red de conferencias es realizar conferencias. Principalmente, esto significa transmitir señales de audio desde los participantes y fuentes de audio a otros participantes. Por lo tanto, se presenta el conjunto de requisitos para el diseño y despliegue de la red resultantes de los estándares de la conferencia, tipos de datos, estructura de los datos transmitidos, propagación en ambientes interiores y fenómenos físicos relacionados con la longitud de onda. Las soluciones de conferencias inalámbricas existentes se proporcionan en frecuencias Wi-Fi, es decir, 2,4 GHz y 5 GHz. Sin embargo, su objetivo no es conectar a los participantes de la conferencia a Internet, sino crear una red que cumpla con los requisitos de la conferencia basada en la funcionalidad proporcionada en la familia de estándares 802.11. La enmienda 802.11ay se proporciona para la comunicación en la banda de frecuencia de 60 GHz. Para permitir una fácil transición de las redes de conferencias inalámbricas hacia mmW, se estudia la enmienda 802.11ay y el canal de radio de 60 GHz. Se considera que el estándar es inadecuado para el tipo y la cantidad de datos enviados en las redes de conferencias inalámbricas. Está diseñado para trabajar con grandes cantidades de datos, mientras que los datos principales en las redes de conferencias son audio en tiempo real. Enviar tramas de datos con esa poca información introduce una sobrecarga significativa debido a los datos del pre 'ambulo en PPDU. Sin embargo, se considera que algunas de sus características merecen una mayor exploración. Al estudiar el caso de uso de la conferencia, es importante centrarse en las configuraciones dedicadas a las conferencias, es decir, la influencia de las propiedades de los materiales interiores, la forma y el tamaño del entorno, y el tipo y ubicación de la antena en la propagación. Para el canal de radio de 60 GHz se estudia el efecto multitrayecto, lo que lleva a la creación del modelo de predicción RMS DS. Además, se muestra que la directividad en esta banda proporciona una gran ventaja si se utiliza la transmisión LoS o si el reflector conocido ayuda a dirigir el haz en la dirección de receptor (RX). Además, esta Tesis también se centra en frecuencias distintas a 60 GHz, precisamente 27 GHz y 28 GHz, las frecuencias introducidas en el Rango de Frecuencia 2 (FR2) 5G NR. Para esta Tesis se realizaron varias campañas de medición en diferentes ambientes, como el auditorio, el aula grande, la sala de reuniones y la sala de seminarios. Los resultados resaltan la importancia de conocer el entorno para optimizar el despliegue de la red. El ray tracing (RT) se utiliza para profundizar la comprensión del comportamiento de los canales de radio medidos. Se identifica el origen de los componentes de trayectorias múltiples y los objetos que son reflectores de mayor impacto. Además, las simulaciones de entornos disponibles se realizan para frecuencias, configuraciones de antenas y configuraciones de mobiliario distintas a las de las mediciones realizadas. Se midieron e introdujeron en el simulador RT los valores de las pérdidas de transmisión y reflexión introducidas por objetos presentes en entornos grandes en frecuencias de 26-40 GHz y 55-65 GHz para permitir resultados m 'as precisos de las simulaciones. La comparación entre mediciones y simulaciones muestra la utilidad de las simulaciones RT en el análisis de canales de radio., [CA] Les xarxes sense fil d'interior són una part integral de les comunicacions actuals. A causa de l'alta demanda de fiabilitat i la gran densitat de xarxes interiors, algunes d'elles migren cap a les freqüències de les ones mil·límetres (mmW), on hi ha una amplada de banda i un rendiment més grans disponibles. Dissenyar la xarxa per a la banda mmW ofereix solucions a alguns problemes presents en freqüències més baixes però també planteja nous reptes. Aquesta tesi se centra especialment en casos d'ús de conferències en entorns grans. La principal funcionalitat de la xarxa de conferències és la realització de conferències. Principalment, això significa transmetre senyals d'àudio dels participants i fonts d'àudio a altres participants. Per tant, es presenta el conjunt de requisits per al disseny i desplegament de la xarxa resultant dels estàndards de conferència, els tipus de dades, l'estructura de les dades transmeses, la propagació en entorns interiors i els fenòmens físics relacionats amb la longitud d'ona. Les solucions de conferències sense fil existents es proporcionen en freqüències Wi-Fi, és a dir, 2,4 GHz i 5 GHz. Tanmateix, no pretenen connectar els participants de la conferència a Internet, sinó crear una xarxa que compleixi els requisits de la conferència basada en la funcionalitat proporcionada a la família d'estàndards 802.11. L'esmena 802.11ay es proporciona per a la comunicació a la banda de freqüència de 60 GHz. Per permetre una fàcil transició de les xarxes de conferències sense fil cap al mmW, s'estudia l'esmena 802.11ay i el canal de ràdio de 60 GHz. Es considera que l'estàndard és inadequat per al tipus i la quantitat de dades enviades a les xarxes de conferències sense fil. Està dissenyat per treballar amb grans quantitats de dades, mentre que les dades principals de les xarxes de conferències són àudio en temps real. L'enviament de trames de dades amb aquesta poca informació introdueix una sobrecàrrega important a causa de les dades del preàmbul a PPDU. No obstant això, es considera que algunes de les seves característiques mereixen una exploració més detallada. Mentre s'estudia el cas d'ús de la conferència, és important centrar-se en les configuracions dedicades a les conferències, és a dir, la influència de les propietats dels materials interiors, la forma i la mida de l'entorn, i el tipus i col·locació d'antena en la propagació. Per al canal de ràdio de 60 GHz, s'estudia l'efecte multicamí, que condueix a la creació del model de predicció RMS DS. A més, es demostra que la directivitat en aquesta banda dóna un gran avantatge si s'utilitza la transmissió LoS o si el reflector conegut ajuda a dirigir el feix en la direcció de receptor (RX). A més, aquesta Tesi també se centra en freqüències diferents de 60 GHz, precisament 27 GHz i 28 GHz, les freqüències introduïdes en el rang de freqüències 2 (FR2) 5G NR. Per a aquesta Tesi s'han realitzat diverses campanyes de mesura en diferents entorns, com ara l'auditori, l'aula gran, la sala de reunions i la sala de seminaris. Els resultats posen de manifest la importància de conèixer l'entorn per tal d'optimitzar el desplegament de la xarxa. El ray tracing (RT) s'utilitza per aprofundir en la comprensió del comportament dels canals de ràdio mesurats. S'identifica l'origen dels components multipath i els objectes que són reflectors més impactants. A més, es realitzen simulacions dels entorns disponibles per a freqüències, configuracions d'antenes i configuracions de mobles diferents de les de les mesures realitzades. Es van mesurar els valors de les pèrdues de transmissió i reflexió introduïdes per objectes presents en entorns grans en freqüències de 26-40 GHz i 55-65 GHz i es van introduir al simulador RT per permetre els resultats més precisos de les simulacions. La comparació entre mesures i simulacions mostra la utilitat de les simulacions RT en l'anàlisi de canals de ràdio., [EN] Indoor wireless networks are an integral part of today's communications. Due to the high demand for reliability and the huge density of indoor networks, some of them are migrating towards the Millimeter Wave (mmW) frequencies, where larger bandwidth and throughput are available. Designing the network for the mmW band offers solutions to some problems present in lower frequencies but also poses new challenges. This Thesis focuses in particular on conference use cases in large environments. The main functionality of the conference network is to conduct conferences. Primarily, this means transmitting audio signals from participants and audio sources to other participants. Therefore, the set of requirements for the network design and deployment resulting from conference standards, data types, structure of transmitted data, propagation in indoor environments, and physical phenomena related to the wavelength are presented. Existing wireless conference solutions are provided in Wi-Fi frequencies, that is 2.4 GHz and 5 GHz. However, they do not aim to connect conference participants to the Internet but to create a network fulfilling the conference requirements based on the functionality provided in 802.11 standards family. The 802.11ay amendment is provided for communication in the 60 GHz frequency band. To allow an easy transition of wireless conference networks towards the mmW, the 802.11ay amendment and the 60 GHz radio channel are studied. The standard is found to be inadequate for the type and amount of data sent in the wireless conference networks. It is designed to work with large amounts of data, whereas the primary data in conference networks is real-time audio. Sending data frames with that little information introduces significant overhead due to the preamble data in Physical Protocol Data Unit (PPDU). Nevertheless, some of its features are considered worth further exploration. While studying the conference use case, it is important to focus on setups dedicated to the conferences, that is, the influence of indoor materials properties, the environment's shape and size, and antenna type and placement on the propagation. For the 60 GHz radio channel, the multipath effect is studied, which leads to the creation of the Root Mean Square Delay Spread (RMS DS) prediction model. Moreover, it is shown that directivity in this band gives a great advantage if the Line of Sight (LoS) transmission is used or the known reflector helps to steer the beam into the direction of the receiver. Furthermore, this Thesis also focuses on frequencies other than 60 GHz, precisely 27 GHz and 28 GHz, the frequencies introduced in Frequency Range 2 (FR2) Fifth Generation (5G) New Radio (NR). Several measurement campaigns were performed for this Thesis in different environments, such as the auditory, the large classroom, the meeting room, and the seminar room. The results highlight the importance of knowing the environment in order to optimize network deployment. The Ray Tracing (RT) is used to deepen the understanding of the measured radio channels' behaviour. The origin of multipath components and the objects that are most impactful reflectors are identified. Moreover, the simulations of available environments are performed for frequencies, antenna setups, and furniture configurations other than those in performed measurements. Values of transmission and reflection losses introduced by objects present in large environments in frequencies 26-40 GHz and 55-65 GHz were measured and introduced into the RT simulator to allow the most precise results of simulations. Comparison between measurements and simulations shows the usefulness of RT simulations in radio channel analysis., This thesis was partly founded by the H2020 Marie Sklodowska-Curie Actions Program within Project Grant No. 766231 WAVECOMBE - ITN - 2017. Measurement campaigns in Gdansk University of Technology were partially funded by the COST Action CA20120, ”Intelligence-Enabling Radio Commu- nications for Seamless Inclusive Interactions” (INTERACT) under the Short Term Scientific Mission No. CA20120-2146922e.