Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Crown Wall Stability of Cube and Cubipod Armored Mound Breakwaters

  • Molines, Jorge|||0000-0001-7850-0759
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] Mound breakwaters usually have a concrete crown wall to reduce the amount of quarry material and to improve accessibility. Popular methods to design crown walls consider the same value of the horizontal pressure in the lower edge of the vertical wall and the seaward edge of the crown wall base. Up-lift forces are calculated assuming a triangular pressure distribution with a value given by pressures in the vertical wall. This assumption is reasonable in structures where the foundation level is below the sea water level, but may significantly differ from reality in crown walls with foundation levels above the sea water level. This study focuses on the influence of the foundation level on the crown wall stability analyzing 2D physical tests of cube and Cubipod armored breakwaters with crown wall., The authors acknowledge the financial support of FEDER, Spanish Ministerio de Ciencia, Innovación y Universidades (Grant RTI2018-101073-B-100), SATO (Grupo OHL), Universitat Politècnica de València (Grant SP20180111, Primeros Proyectos de Investigación (PAID-06-18),Vicerrectorado de Investigación, Innovación y Transferencia de la Universitat Politècnica de València) and Generalitat Valenciana (Grant AEST/2019/004)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical Study of Wave Forces on Crown Walls of Mound Breakwaters with Parapets

  • Molines, Jorge|||0000-0001-7850-0759
  • Bayón, Arnau|||0000-0001-5007-0208
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] The influence of parapets on crown walls of mound breakwaters on wave forces has not been extensively analyzed in the literature. In this study, numerical experiments were carried out using the open-source platform OpenFOAM(R) to evaluate the influence of nine crown wall geometries with and without parapets. The OpenFOAM(R) model was validated with laboratory experiments. Dimensionless horizontal forces and overturning moments due to horizontal forces increase when there is a parapet. Dimensionless up-lift forces provide similar results, regardless of the existence of a parapet. Crown walls with parapets increase the horizontal wave forces and overturning moments due to horizontal wave forces by a factor of two., This research was funded by (1) Universitat Politecnica de Valencia (Grant SP20180111, Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia) and (2) Spanish Ministerio de Ciencia, Innovacion y Universidades (Grant RTI2018-101073-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Distribution of individual wave overtopping volumes on mound breakwaters

  • Molines, Jorge|||0000-0001-7850-0759
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
  • Herrera, Maria P.
[EN] Conventional mound breakwaters are usually designed to withstand low mean wave overtopping discharges and a low proportion of overtopping waves (P-ow). Existing formulas to estimate P-ow, and maximum individual wave overtopping volume are usually based on tests with high P-ow; this study is focused on mound breakwaters subjected to P-ow, < 0.2. The performance of the 2-parameter Weibull and Exponential distributions is examined in order to describe individual wave overtopping volumes of mound breakwaters in non-breaking wave conditions. A new methodology is applied to 164 small-scale 2D physical tests to identify the number of overtopping waves, and the corresponding individual wave overtopping volumes. Utility functions are used to consider the relative relevance of the observed data: in this study, a quadratic utility function depending on all the individual wave overtopping volumes and step utility functions with 10%, 30% and 50% of the highest volumes are used to fit the Weibull and Exponential distributions. In this study, a new estimator of P-ow is proposed to improve the predictions required to estimate the maximum individual wave overtopping volume. Existing estimators of P-ow, underpredict the largest values of P-ow, measured in the physical tests. The parameters fitted to the Weibull and Exponential distributions using the quadratic utility function provide estimations of the dimensionless maximum individual wave overtopping volume with relative mean squared errors rMSE = 10.4% and 10.6%, respectively. When CLASH Neural Network-estimated mean overtopping rates are used to predict the maximum individual wave overtopping with the quadratic utility function, the 2-parameter Weibull and Exponential distributions provide rMSE = 31.6% and rMSE = 33.3%, respectively. The new estimators proposed in this study improve the predictions of P-ow and maximum individual wave overtopping volumes on conventional mound breakwaters designed for low wave overtopping rates., The authors are grateful for financial support from European FEDER and Spanish Ministerio de Economia y Competitividad (Grants BIA2012-33967 and BIA2015-70435-R), SATO (OHL Group), Universitat Politecnica de Valencia (Grant SP20180111, Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia) and CDTI (Centro para el Desarrollo Tecnologico e Industrial). The authors also thank Debra Westall for revising the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of Parapets on Wave Overtopping on Mound Breakwaters with Crown Walls

  • Molines, Jorge|||0000-0001-7850-0759
  • Bayón, Arnau|||0000-0001-5007-0208
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] Background literature on the influence of parapets on the overtopping of mound breakwaters is limited. In this study, numerical tests were conducted using computational fluid dynamics (CFD) to analyze the influence of nine crown wall geometries (seven with parapets). The CFD model was implemented in OpenFOAM((R)) and successfully validated with laboratory tests. A new estimator of the dimensionless mean wave-overtopping discharges (logQ) on structures with parapets is proposed. The new estimator depends on the estimation of logQ of the same structure without a parapet. The effects on wave overtopping of the parapet angle (epsilon(p)), parapet width (w(p)), and parapet height (h(p)) were analyzed. Low values of epsilon(p) and w(p)/h(p) approximate to 1 produced the highest parapet effectiveness to reduce the mean wave-overtopping discharges., This research was funded by Universitat Politecnica de Valencia (Grant SP20180111, Primeros Proyectos de Investigacion (PAID-06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia). The authors are grateful for financial support from European FEDER and Spanish Ministerio de Economía y Competitividad (Grant RTI2018-101073-B-I00), SATO (OHL Group). The authors acknowledge the support provided by the postdoctoral company internship program AEST granted to Jorge Molines by Generalitat Valenciana (Grant AEST/2019/004) and by the postdoctoral program APOSTD granted to Arnau Bayon by Generalitat Valenciana (Grant APOSTD/2019/100).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Individual wave overtopping volumes on mound breakwaters in breaking wave conditions and gentle sea bottoms

  • Mares-Nasarre, Patricia
  • Molines, Jorge|||0000-0001-7850-0759
  • GÓMEZ-MARTÍN, M. ESTHER|||0000-0003-1555-4383
  • Medina, Josep R.|||0000-0001-5007-7426
[EN] Mound breakwaters are usually designed to limit the mean wave overtopping rate (q) or the maximum individual wave overtopping volume (V-max). However, rarely do studies focus on wave overtopping volumes on breakwaters in depth-limited breaking wave conditions. This study analyzes 2D physical tests on mound breakwaters with relevant overtopping rates (0.33 <= R-c/H-m0 <= 2.83) and three armor layers (Cubipod (R)-1L, rock-2L and cube-2L) in depth-limited breaking wave conditions (0.20 <= H-m0/h(s) <= 0.90) and with two bottom slopes (m = 1/25 and m = 1/50). The 2-parameter Weibull distribution was used to estimate V-max* = V-max/(gH(m0)T(01)(2)) with co-efficient of determination R-2 = 83.3%. In this study, the bottom slope (m = 1/50 and m = 1/25) did not significantly influence V-mox or the number of overtopping events, N-ow. During the design phase of a mound breakwater, q is required to use the methods given in the literature to estimate Thus, q must be estimated for design purposes when measured q is not available. In this study, CLASH Neural Network (CLASH NN) was used to estimate q with R-2 = 63.6%. If the 2-parameter Weibull distribution proposed in this study is used to estimate V-max with q estimated using CLASH NN, the prediction error of V-max* is R-2 = 61.7%. With the method presented in this study, the ratio between estimated and measured falls within the range 1/2 to 2 (90% error band) when q is estimated with CLASH NN. The new estimators derived in this study provide good predictions of N-ow and V-max with a method simpler than those in the literature on overtopped mound breakwaters in depth-limited breaking wave conditions on gentle sea bottoms (1/50 <= m <= 1/25)., The authors acknowledge the financial support from the Ministerio de Economia y Competitividad and Fondo Europeo de Desarrollo Regional (FEDER) under grant RTI2018-101073-B-I00, Universitat Politecnica de Valencia (Grant SP20180111), Primeros Proyectos de Investigacion (PAID06-18), Vicerrectorado de Investigacion, Innovacion y Transferencia de la Universitat Politecnica de Valencia and Generalitat Valenciana (Grant AEST/2019/004). The first author was also financially supported through the FPU program (Formacion de Profesorado Universitario) funded by Ministerio de Educacion, Cultura y Deporte under grant FPU16/05081. The authors thank Debra Westall for revising the manuscript.