Pasar al contenido principal

EVALUACION DE LA REDUCCION DE EMISIONES CONTAMINANTES Y CO2 CON EL USO DE COMBUSTIBLES LIMPIOS EN VEHICULOS HIBRIDOS

RTI2018-102025-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of the environmental impact of HCNG light-duty vehicles in the 2020-2050 transition towards the hydrogen economy

  • Molina, Santiago|||0000-0001-7879-2421
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • López-Juárez, Marcos|||0000-0001-9886-4728
  • Olcina-Girona, Miguel
[EN] As the world intensifies its efforts to reduce the adverse effects of global warming, the shift towards a fully developed hydrogen-based economy is emerging as a core strategy. This transition involves the strategic blending of hydrogen with conventional fossil fuels such as natural gas (HCNG), allowing for adaptation to hydrogen availability. Nevertheless, the environmental impact of HCNG vehicles in realistic scenarios with variable hydrogen content remains unexplored. This study focuses on evaluating the global warming impact of the transition of light-duty passenger cars from CNG to H2 vehicles using HCNG blends from 2020 to 2050 and different realistic scenarios. The results in the present study were obtained through a combination of an experimental testing campaign that allowed obtaining how the performance and emissions of HCNG vehicles change with the H2 content and a life cycle assessment methodology. Based on the findings, the scenario in which hydrogen was mostly produced from SMR-dominant, was found to have the potential to reach and outperform the zero-emission concept due to the utilization of biogas. From the results of this study, the recommended H2 content in HCNG blends that offers low environmental impact while avoiding the overdemand of hydrogen in the short term for the 2020-2030 decade is 25% H2 content, increasing to 50% by 2030, and to 75%-100% during the 2040-2050 decade, thus reaching the transition towards pure-H2 technology that minimizes environmental impact., This research has been partially funded by FEDER and the Spanish Government through project RTI2018-102025-B-I00 (CLEAN-FUEL) . M. Olcina-Girona is partly supported by the grant CIACIF/2021/437 of the "Subvenciones para la contratacion de personal investigador pre-doctoral (ACIF) "of the Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital de la Generalitat Valenciana, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative global warming impact and NOx emissions of conventional and hydrogen automotive propulsion systems

  • Desantes J.M.|||0000-0002-4124-9393
  • Molina, Santiago|||0000-0001-7879-2421
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • López-Juárez, Marcos|||0000-0001-9886-4728
[EN] With the rise of cleaner technologies for transport and the emergence of H-2 as a fuel, most of the emissions in the well-to-wheel process are shifting towards the energy carrier production (fuel or electricity). The objective of this study is to perform a simplified cradle-to-grave Life Cycle Assessment (LCA) that compares the greenhouse gases (GHG) and NOX emissions of H-2, electric and conventional technologies for the automotive sector in Europe and to devise the optimum strategy of vehicle fleet renewal to reduce the emissions. In this study the effect of water as GHG was considered and, unless other studies, the current European energy mix and that meeting the objectives for 2050 were considered (while technology level was kept constant) since H-2 from electrolysis and electric vehicles' well-to-wheel emissions are sensitive to the energy mix. To estimate the emissions, the fuel, vehicle production and operation cycles were considered independently for each technology and then put together. For H-2, the best production and distribution strategy was steam methane reforming (SMR) with CO2 sequestration for GHG-100 gases and without capturing CO2 for NOX, both with central plant production and tube trailer transport. Fuel cell vehicles (FCV) with optimum H-2 production always produce the lowest GHG-100 emissions and slightly higher NOX than battery electric vehicles (BEV) in the EU 2050 scenario. In contrast, HICEV would need to reach a fuel consumption of around 30 kWh/100 km to be competitive in emissions against BEV, for that, direct injection (DI) combined with a range extender (REx) hybrid architecture is the recommended powerplant concept. Finally, the optimum strategy to reduce emissions that Europe could follow is presented for the short, mid and long term., This research has been partially funded by FEDER and the Spanish Government through project RTI2018-102025-B-I00 (CLEAN-FUEL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of hydrogen substitution for stable lean operation on spark ignition engines fueled by compressed natural gas

  • Molina, Santiago|||0000-0001-7879-2421
  • Ruiz-Rosales, Santiago|||0000-0001-9536-3696
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Olcina-Girona, Miguel
[EN] Compressed Natural Gas (CNG) appears as a midterm solution to conventional fuels, such as gasoline and diesel. The low carbon content and the possibility of being obtained from renewable sources (animal or agriculture waste, landfills, waste of the industry food or aquatic biomass) make CNG an attractive option to reduce Greenhouse Gases (GHG) emission. Applying lean combustion strategies on CNG improves efficiency levels while reducing pollutant emissions. In these conditions, heat transfer losses are reduced, and the thermal efficiency increased, especially at partial loads where increasing air dilution is one of the main strategies to reduce pumping losses. Hydrogen (H2) addition helps to enhance combustion in these diluted conditions and to reduce the combustion instability. This combustion concept has been widely studied over the last years, however further research is still needed. This investigation focuses on how hydrogen substitution affects the performance and emissions (both CO2 and pollutant) of a port fuel injection (PFI) spark ignition (SI) engine fueled by CNG. Thus, the main objective of this investigation is to contribute to the existent knowledge about dual-fuel combustion strategies based on CNG and H2 blends. Results demonstrated that hydrogen substitution helps to reduce the CO2 emissions by two ways: improving the engine efficiency and substituting part of the main carbon-based fuel. Despite of this advantage, NOx emissions are not reduced, and they will require after-treatment systems to deal with current pollutant regulations., This research has been partially funded by FEDER, Spain and the Spanish Government through project RTI2018-102025-B-I00 (CLEANFUEL). M. Olcina-Girona is partly supported by an FPI contract (FPI S2-22-37816) of the Programa de Apoyo para la Investigacion y Desarrollo (PAID 01 22) of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pre-chamber ignition systems: A methodological proposal to reproduce a reference case in a simplified experimental facility for fundamental studies

  • Desantes J.M.|||0000-0002-4124-9393
  • López, J. Javier|||0000-0002-9486-2511
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Beltrao de Vargas-Antolini, Jacson
[EN] To further understand the processes and phenomena taking place in the pre-chamber (PC) ignition concept, many studies under simplified conditions have been carried out in different experimental facilities (e.g. constant volume chambers and rapid compression machines). However limited information is provided about how the volume, orifice diameter and number of orifices were defined, raising the question whether the results are representative of engine-like conditions or not. This novel study arises from the necessity to determine a methodology to reproduce a reference pre-chamber, preserving as much as possible its jet characteristics. A theoretical development based on the first law of thermodynamics has been performed, and a relationship between the effective flow area, pre-chamber volume and engine speed is proposed as the governing parameter of the mass exchange between chambers. Besides, relaying on the know-how of gas jets, a relationship between the orifice diameter, jet tip penetration and engine speed is suggested as the criterion to preserve the relative jet penetration (respect to the distance from the PC hole to the combustion chamber walls). A numerical validation of these assumptions was carried out using a one-dimensional flow calculator to estimate the thermodynamic properties and mass transfer between chambers, and a one-dimensional spray model to estimate the penetration of the PC combustion products jets. Finally, preserving the ratio between the total area of the PC holes and the product of the PC volume and the engine speed for two pre-chamber geometries, an identical pressure rise rate, in an angular basis, is achieved in both pre-chambers. Furthermore, the same relative jet penetration rate, in an angular basis, can be also achieved, even under different engine speeds, when the ratio between the orifice diameter and the product of the square of the jet free length and the engine speed is preserved., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This research has been partially funded by FEDER and the Spanish Government through project RTI2018-102025-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization and sizing of a fuel cell range extender vehicle for passenger car applications in driving cycle conditions

  • Molina, Santiago|||0000-0001-7879-2421
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • López-Juárez, Marcos|||0000-0001-9886-4728
[EN] Aiming to reduce global warming and emissions in general, cleaner technologies are the spotlight of research and industry development. Among them, fuel cell vehicles (FCV) are gaining interest to decarbonize the transport sector. Plug-in FCV or FCV in range-extender configuration (FCREx) is an interesting option to reduce the total cost of ownership (TCO) and the energy usage per km. The aim of this study was to generate design spaces of FCREx by varying the FC stack maximum power output, the battery capacity, and the H-2 tank capacity to understand the implications of this architecture in range, consumption, and cost (estimated with a WLTP driving cycle). Unlike other studies, the approach was focused on a novel architecture for passenger vehicles and was focused on the development of the validated FC system model and the energy management strategy (EMS) optimization for each design, based on the Pontryagin Minimum Principle (PMP). Consumption was found to decrease with increasing battery capacity and FC maximum power due to the higher efficiency of the systems. The design spaces showed how with 5 kg of H-2 and >= 50 kWh of battery capacity the maximum range of FCREx could be over 700 km. The results of this study showed how FCREx architecture could provide overall energy consumption saving up to 6.8% and H-2 consumption saving ranging from 16.8% to 25%, compared to current commercial FCVs. The optimum FCREx design, not only based on performance, should have similar to 30 kWh of battery capacity and >= 80 kW of FC maximum power to minimize manufacturing costs while maximizing efficiency., This research has been partially funded by FEDER, Spain and the Spanish Government through project RTI2018-102025-B-I00 (CLEANFUEL) and through the University Faculty Training (FPU) program
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Potential of a Two-Stage Variable Compression Ratio Downsized Spark Ignition Engine for Passenger Cars under different driving conditions

  • López, J. Javier|||0000-0002-9486-2511
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Vielmo-Cogo, Vitor
  • Wittek, Karsten
[EN] With the aim of reducing pollutant emissions from internal combustion engines (ICE), the application of stoichiometrically operated spark ignition (SI) engines, for light-duty vehicles, has been overcoming the compression ignition (CI) engines market share throughout the past years. The ability of a substantial reduction of the primary harmful emissions (HC, CO, and NOx) through the use of the simple three-way catalyst (TWC) is the main reason for that. Nonetheless, with increasing attention to CO2 emissions, the development of highly efficient downsized SI engines turn to be of enormous interest. The synergies of multiple systems such as direct injection, turbocharger, and variable valve actuation are able to lead the SI efficiencies closer to those of CI engines. However, to enable high load operation on such downsized engines, the compression ratio (CR) must be reduced due to knock limitations, reducing the partial-load operations efficiency. The implementation of two-stage variable compression ratio (VCR) systems enables the extraction of high thermal efficiency with high CR at lower loads and extended knock-free high load operation with low CR. In this study, the evaluation of a two-stage VCR system applied to a state-of-the-art downsized SI engine was made through standard driving cycle simulations. The VCR mechanism is composed of an eccentric element in the small end of the connecting rod, which is rotated to increase/decrease the effective connecting rod length, achieving the CRs of 12.11:1 and 9.56:1. The engine was run in an eddy-current dynamometer test bench throughout the essential operating range to obtain the brake specific fuel consumption (BSFC) map. The VCR mechanism CR switching delay was also experimentally characterized to derive a function of the operating conditions. The measured map was entered into the map-based driving cycle simulation with a sub-model to account for the isolated effects of the transient period encompassing the compression ratio switching. The results show that slow CR transitions lead to fuel consumption penalties, which suggests the need for optimizing the control strategies of the VCR system. Even though this penalty, once the gear up-shift speed is optimized for each driving cycle, the VCR system still enables fuel consumption reductions up to 3% on the WLTC driving cycle, up to 4% on the proposed urban driving cycles and up to 3% on highway driving cycles with respect to the fixed CR., This research has been partially funded by FEDER and the Spanish Government through project RTI2018-102025-B-I00. The authors also acknowledge the Universitat Politecnica de Valencia for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Lnvestigacion (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study on hydrogen substitution in a compressed natural gas spark-ignition passenger car engine

  • Molina, Santiago|||0000-0001-7879-2421
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Gómez-Soriano, Josep|||0000-0002-2742-9224
  • Olcina-Girona, Miguel
[EN] Hydrogen substitution in applications fueled by compressed natural gas arises as a potential alternative to fossil fuels, and it may be the key to an effective hydrogen economy transition. The reduction of greenhouse gas emissions, especially carbon dioxide and unburned methane, as hydrogen is used in transport and industry applications, makes its use an attractive option for a sustainable future. The purpose of this research is to examine the gradual adoption of hydrogen as a fuel for light-duty transportation. Particularly, the study focuses on evaluating the performance and emissions of a single-cylinder port fuel injection spark-ignition engine as hydrogen is progressively increased in the natural gas-based fuel blend. Results identify the optimal conditions for air dilution and engine operation parameters to achieve the best performance. They corroborate that the dilution rate has to be adjusted to control pollutant emissions as the percentage of hydrogen is increased. Moreover, the study identifies the threshold for hydrogen substitution below which the reduction of carbon dioxide emissions due to efficiency gains is negligible compared to the reduction of the carbon content in the fuel blend. These findings will help reduce the environmental footprint of light-duty transportation not only in the long term but also in the short and medium terms., This research has been partially funded by FEDER and the Spanish Government through project RTI2018-102025-B-I00 (CLEAN-FUEL). M. Olcina-Girona is partly supported by the grant CIACIF/2021/437 of the Subvenciones para la contratación de personal investigador predoctoral (ACIF) of the Conselleria d Innovació, Universitats, Ciència i Societat Digital de la Generalitat Valenciana. Funding for open access charge: CRUE-Universitat Politècnica de València.