Pasar al contenido principal

VERIFICACION, VALIDACION CUANTIFICACION DE INCERTIDUMBRES Y MEJORA DE LA PLATAFORMA NEUTRONICA/TERMOHIDRAULICA PANTHER

ENE2017-89029-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Block hybrid multilevel method to compute the dominant lambda-modes of the neutron diffusion equation

  • Carreño, Amanda|||0000-0003-2302-1157
  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The dominant lambda-modes associated with a nuclear reactor configuration describe the neutron steady-state distribution and its criticality. Furthermore, they are useful to develop modal methods to study reactor instabilities. Different eigenvalues solvers have been successfully used to obtain such modes, most of them are implemented reducing the original generalized eigenvalue problem to an ordinary one. Thus, it is necessary to solve many linear systems making these methods not very efficient, especially for large problems. In this work, the original generalized eigenvalue problem is considered and two block iterative methods to solve it are studied: the block inverse-free preconditioned Arnoldi method and the modified block Newton method. All of these iterative solvers are initialized using a block multilevel technique. A hybrid multilevel method is also proposed based on the combination of the methods proposed. Two benchmark problems are studied illustrating the convergence and the competitiveness of the methods proposed. A comparison with the Krylov-Schur method and the Generalized Davidson is also included., This work has been partially supported by Spanish Ministerio de Economia y Competitividad under projects ENE2017-89029-P, MTM2017-85669-P and BES-2015-072901.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application case for phase III of UAM-LWR benchmark: Uncertainty propagation of thermal-hydraulic macroscopic parameters

  • Mesado, C.
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] This work covers an important point of the benchmark released by the expert group on Uncertainty Analysis in Modeling of Light Water Reactors. This ambitious benchmark aims to determine the uncertainty in light water reactors systems and processes in all stages of calculation, with emphasis on multi-physics (coupled) and multi-scale simulations. The Gesellschaft für Anlagen und Reaktorsicherheit methodology is used to propagate the thermal-hydraulic uncertainty of macroscopic parameters through TRACE5.0p3/PARCSv3.0 coupled code. The main innovative points achieved in this work are i) a new thermal-hydraulic model is developed with a highly-accurate 3D core discretization plus an iterative process is presented to adjust the 3D bypass flow, ii) a control rod insertion occurrence ¿which data is obtained from a real PWR test¿ is used as a transient simulation, iii) two approaches are used for the propagation process: maximum response where the uncertainty and sensitivity analysis is performed for the maximum absolute response and index dependent where the uncertainty and sensitivity analysis is performed at each time step, and iv) RESTING MATLAB code is developed to automate the model generation process and, then, propagate the thermal-hydraulic uncertainty. The input uncertainty information is found in related literature or, if not found, defined based on expert judgment. This paper, first, presents the Gesellschaft für Anlagen und Reaktorsicherheit methodology to propagate the uncertainty in thermal-hydraulic macroscopic parameters and, then, shows the results when the methodology is applied to a PWR reactor., The authors of this work thank the UAM-LWR benchmark organizers without whom this work would not have been possible. Besides, the authors sincerely thank to the Ministerio de Economia, Industria y Competitividad and the "Plan Nacional de I+D+i" for funding the projects NUC-MULTPHYS ENE2012-34585 and ENE2017-89029-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptive time-step control for modal methods to integrate the neutron diffusion equation

  • Carreño, Amanda|||0000-0003-2302-1157
  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The solution of the time-dependent neutron diffusion equation can be approximated using quasi-static methods that factorise the neutronic flux as the product of a time dependent function times a shape function that depends both on space and time. A generalization of this technique is the updated modal method. This strategy assumes that the neutron flux can be decomposed into a sum of amplitudes multiplied by some shape functions. These functions, known as modes, come from the solution of the eigenvalue problems associated with the static neutron diffusion equation that are being updated along the transient. In previous works, the time step used to update the modes is set to a fixed value and this implies the need of using small time-steps to obtain accurate results and, consequently, a high computational cost. In this work, we propose the use of an adaptive control time-step that reduces automatically the time-step when the algorithm detects large errors and increases this value when it is not necessary to use small steps. Several strategies to compute the modes updating time step are proposed and their performance is tested for different transients in benchmark reactors with rectangular and hexagonal geometry., This work has been partially supported by Spanish Ministerio de Economia y Competitividad under projects ENE2017-89029-P and MTM2017-85669-P and financed with the help of a Primeros Proyectos de Investigacion (PAID-06-18) from Vicerrectorado de Investigacion, Innovacion y Transferencia of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the PHWR benchmark transient using a high-order spherical harmonics-nodal collocation method and treatment of rod cusping effect

  • Capilla Romá, Maria Teresa|||0000-0002-8764-5754
  • Talavera Usano, César Félix|||0000-0002-8542-9097
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] We develop and validate node homogenization methods, based on one and three-dimensional node equivalent problems, that improve the volume weighted method for the treatment of the rod cusping effect. The numerical implementation of these techniques in a numerical approach based on general spherical harmonics, nodal collocation method, for arbitrary odd order ¿¿, and fully implicit time discretization, is verified on the AECL-7236 PHWR benchmark transient, showing the validity and convergence of the P1 and P3 approximations and the ability of the method to give accurate results for the relative power and scalar flux when a coarse spatial mesh combined with advanced homogenization techniques is used., Partial support to perform this work has been received by the Spanish Agencia Estatal de Investigación under project ENE201789029PAR. The authors thank the anonymous reviewers for their comments and suggestions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Modelado del PWR TMI-1 mediante los códigos de celda Serpent y Polaris

  • Labarile, A.|||0000-0003-1610-7606
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] Este trabajo presenta la aplicación de una metodología para la generación de secciones eficaces macroscópicas a nivel de celda y la creación de librerías neutrónicas en formato Nemtab, para su aplicación en el código nodal Parcs. Las secciones eficaces se generan mediante dos códigos distintos, uno determinista y otro basado en el método Monte Carlo. Se comparan inicialmente los resultados de ambos códigos para posteriormente generar tablas de secciones eficaces parametrizadas con los datos obtenidos. Finalmente se comparan los resultados del código nodal empleando las dos librerías generadas., Los autores agradecen el programa de apoyo a la investigación del Ministerio de Economía y Competitividad por el proyecto ENE_2017-89029-P gracias al cual se ha podido realizar este trabajo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Block Preconditioning Matrices for the Newton Method to Compute the Dominant lambda-Modes Associated with the Neutron Diffusion Equation

  • Carreño, Amanda|||0000-0003-2302-1157
  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Bergamaschi, Luca
  • Martinez, Angeles
[EN] In nuclear engineering, the lambda-modes associated with the neutron diffusion equation are applied to study the criticality of reactors and to develop modal methods for the transient analysis. The differential eigenvalue problem that needs to be solved is discretized using a finite element method, obtaining a generalized algebraic eigenvalue problem whose associated matrices are large and sparse. Then, efficient methods are needed to solve this problem. In this work, we used a block generalized Newton method implemented with a matrix-free technique that does not store all matrices explicitly. This technique reduces mainly the computational memory and, in some cases, when the assembly of the matrices is an expensive task, the computational time. The main problem is that the block Newton method requires solving linear systems, which need to be preconditioned. The construction of preconditioners such as ILU or ICC based on a fully-assembled matrix is not efficient in terms of the memory with the matrix-free implementation. As an alternative, several block preconditioners are studied that only save a few block matrices in comparison with the full problem. To test the performance of these methodologies, different reactor problems are studied., This work has been partially supported by the Spanish Ministerio de Economia y Competitividad under Projects ENE2014-59442-P, MTM2014-58159-P, and BES-2015-072901.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Frequency-domain models in the SPN approximation for neutron noise calculations

  • Carreño, Amanda|||0000-0003-2302-1157
  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Simulations of the neutron flux fluctuations, known as neutron noise, can be performed by means of the spherical harmonics equations (SPN) approximation with higher accuracy than with the diffusion equation. In this sense, one can solve these equations in the time-domain or in the frequency-domain. This last approach permits solving the neutron noise without performing complete time-dependent simulations for monochromatic perturbations. This work presents two formulations of the SPN equations in the frequency domain, that are obtained by using different treatments of the time derivatives of the field moments. The methodology is verified with several neutron noise problems where the numerical results are compared with the time-domain computations of FEMFFUSION code. The C5G7 noise benchmark compares both SPN formulations, showing the applicability of the diffusive SPN approximation., This work has been partially supported by Spanish Ministerio de Economía y Competitividad under projects ENE2017-89029-P and MTM2017-85669-P. Furthermore, this work has been financed by the Generalitat Valenciana under the project PROMETEO/2018/035.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Strategies of Preconditioner Updates for Sequences of Linear Systems Associated with the Neutron Diffusion

  • Carreño, Amanda|||0000-0003-2302-1157
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Bergamaschi, L.
  • Martínez, A.
[EN] The time-dependent neutron diffusion equation approximates the neutronic power evolution inside a nuclear reactor core. Applying a Galerkin finite element method for the spatial discretization of these equations leads to a stiff semi-discrete system of ordinary differential equations. For time discretization, an implicit scheme is used, which implies solving a large and sparse linear system of equations for each time step. The GMRES method is used to solve these systems because of its fast convergence when a suitable preconditioner is provided. This work explores several matrix-free strategies based on different updated preconditioners, which are constructed by low-rank updates of a given initial preconditioner. They are two tuned preconditioners based on the bad and good Broyden¿s methods, initially developed for nonlinear equations and optimization problems, and spectral preconditioners. The efficiency of the resulting preconditioners under study is closely related to the selection of the subspace used to construct the update. Our numerical results show the effectiveness of these methodologies in terms of CPU time and storage for different nuclear benchmark transients, even if the initial preconditioner is not good enough., This work has been partially supported by Spanish Ministerio de Economia y Competitividad under projects ENE2017-89029-P and MTM2017-85669-P. The second and third authors have been supported by the INdAM Research group GNCS project: Optimization and Advanced Linear Algebra for Problems Governed by PDEs. Furthermore, this work has been financed by the Generalitat Valenciana under the project PROMETEO/2018/035. We sincerely thank the three anonymous reviewers for helping us to significantly improve the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simulation studies on natural circulation phenomena during an SBO accident

  • M. Lorduy|||0000-0002-8942-8278
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Natural circulation flow capability for removing decay core power has been demonstrated, and several studies have focused on taking advantage of this fact. This work studies the sequence of events that occur during a station blackout accident, in which natural circulation is the dominant flow pattern in the primary system. To this end, the Test A1.1 carried out in ATLAS facility is analyzed and a TRACE5 model is developed paying special attention on the modeling of heat losses. This phenomenon is very influential in the flow capacity and this is demonstrated through the correlation G~(Q-qloss )m between the net power Q-qloss and the mass flow G, that has been established from simulations under steady-state conditions. The Test A1.1 reproduction shows the TRACE5 code adequacy to investigate natural circulation phenomena, which are difficult to control in a facility. In addition, the heat loss modeling technique using constant heat transfer coefficients is substantiated., The authors are grateful to the Management Board of the OECD-ATLAS Project for their consent to this publication, and thank the Spanish Nuclear Regulatory Body (CSN) for the technical and financial support under the agreement STN/4524/2015/640 and the Spanish Ministerio de Economia, Industria y Competitividad under the agreement ENE2017-89029-P. They also thank Ronald Harrington, from USNRC, for sharing the preliminary TRACE model used in this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptive time-step control for the modal method to integrate the multigroup neutron diffusion equation

  • Carreño, Amanda|||0000-0003-2302-1157
  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The distribution of the power inside a reactor core can be described by the time dependent multigroup neutron diffusion equation. One of the approaches to integrate this time-dependent equation is the modal method, that assumes that the solution can be described by the sum of amplitude function multiplied by shape functions of modes. These shape functions can be computed by solving a _-modes problems. The modal method has a great interest when the distribution of the power cannot be well approximated by only one shape function, mainly, when local perturbations are applied during the transient. Usually, the shape functions of the modal methods are updated for the time-dependent equations with a constant time-step size to obtain accurate results. In this work, we propose a modal methodology with an adaptive control time-step to update the eigenfunctions associated with the modes. This algorithm improves efficiency because of time is not spent solving the systems to a level of accuracy beyond relevance and reduces the step size if they detect a numerical instability. Step size controllers require an error estimation. Different error estimations are considered and analyzed in a benchmark problem with a out of phase local perturbation., This work has been partially supported by Spanish Ministerio de Economía y Competitividad under projects ENE2017-89029-P, MTM2017-85669-P and BES-2015-072901
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Block strategies to compute the lambda modes associated with the neutron diffusion equation

  • Carreño, Amanda|||0000-0003-2302-1157
  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Given a configuration of a nuclear reactor core, the neutronic distribution of the power can beapproximated by means of the multigroup neutron diffusion equation. This is an approximationof the neutron transport equation that assumes that the neutron current is proportional to thegradient of the scalar neutron ux with a diffusion coeffcient [1]. This approximation is known asthe Fick's first law. To define the steady-state problem, the criticality of the system must be forced.In this work, the -modes problem is used. That yields a generalized eigenvalue problem whoseeigenvector associated with the dominant eigenvalue represents the distribution of the neutron uxin steady-state.The spatial discretization of the equation is made by a continuous Galerkin high order finite elementmethod is applied [2] to obtain an algebraic eigenvalue problem. Usually, the matrices obtainedfrom the discretization are huge and sparse. Moreover, they have a block structure given by the different number of energy groups. In this work, block strategies are developed to optimize thecomputation of the associated eigenvalue problems.First, different block eigenvalue solvers are studied. On the other hand, the convergence of theseiterative methods mainly depends on the initial guess and the preconditioner used. In this sense,different multilevel techniques to accelerate the rate of convergence are proposed. Finally, the sizeof the problems can be suffciently large to be unfeasible to be solved in personal computers. Thus,a matrix-free methodology that avoids the allocation of the matrices in memory is applied [3].Three-dimensional benchmarks are used to show the effciency of the methodology proposed., This work has been partially supported by Spanish Ministerio de Economía y Competitividad under projects ENE2017-89029-P and MTM2017-85669-P. Furthermore, this work has been financed by the Generalitat Valenciana under the project PROMETEO/2018/035.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

PARCS vs CORE SIM neutron noise simulations

  • Olmo-Juan, Nicolás
  • Demazière, Christophe
  • Barrachina, Teresa|||0000-0001-8794-4204
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] In a nuclear reactor, even operating at full power and steady-state conditions, fluctuations are detected in the recording of any process parameter. These fluctuations (also called noise) could be of various origins, such as, turbulence, mechanical vibrations, coolant boiling, etc. The monitoring and complete comprehension of those parameters should thus allow detecting, using existing instrumentation and without introducing any external perturbation to the system, possible anomalies before they have any inadvertent effect on plant safety and availability. In order to reproduce and study the induced neutron noise in a nuclear reactor core, it is compulsory to develop suitable tools. Existing time-domain codes were originally not developed for this type of calculations. Modifications of those codes and the development of an associated intricate methodology are necessary for enabling noise calculations. This involves, in some cases, changes in the source code and the development of new auxiliary tools to ensure accurate reproductions of the core behavior under the existence of a neutron noise source. In the proposed work, the time-domain neutron diffusion code PARCS is used to model the effect of stationary perturbations representative of given neutron noise sources. In order to validate the feasibility of the time-dependent methodology thus developed, comparisons with the results of simulations performed in the frequency domain, using the CORE SIM tool, developed at Chalmers University of Technology, are performed. The development of a few test cases based on a real reactor model are undertaken as the basis for such comparisons and a methodology aimed at assessing the time-domain simulations versus the frequency-domain simulations is established. It is demonstrated that PARCS, although not primarily developed for neutron noise calculations, can reproduce neutron noise patterns for reasonable frequencies. However, it is also observed that unphysical results are occasionally obtained., This work was carried out under the pre-doctoral contract FPI Subprogram 1 and mobility aids of the Universitat Politècnica de València and the support of the Spanish Ministerio de Ciencia e Innovación under the project ENE2017-89029-P. The research leading to these results was also partially funded from the Euratom research and training programme 2014 2018 under grant agreement No 754316 (CORTEX project).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Validation of the SHNC time-dependent transport code based on the spherical harmonics method for complex nuclear fuel assemblies

  • Capilla Romá, Maria Teresa|||0000-0002-8764-5754
  • Talavera Usano, César Félix|||0000-0002-8542-9097
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The diffusion approximation to the time-dependent Boltzmann transport equation gives accurate results for traditional nuclear reactor designs, but new reactor designs and new fuel elements require neutron transport methods. We develop a numerical approximation to the time-dependent transport equation coupled to delayed neutron precursors based on the spherical harmonics P L equations, for odd L, and on the Backward Euler finite difference discretization of time. The resulting scheme can be written as a stationary form of diffusive second order PL equations. This allows a reduction by half to the number of unknowns and also to apply a nodal collocation method to the spatial discretization of the problem, using coarse spatial grids to further reduce memory requirements. This scheme is validated with several transient benchmarks, where the convergence properties are established and compared with the simplified PL approximation. A more realistic transient benchmark, based on the two-group C5 MOX problem, is finally introduced, showing the need of high order P L approximation for complex fuel geometries., This work was partially supported by the Spanish Agencia Estatal de Investigacion under project ENE2017-89029-P-AR, and the Generalitat Valenciana under project PROMETEO/2018/035. The authors express their gratitude to the anonymous reviewers for their suggestions and helpful comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

PARCS vs CORE SIM. Simulación del ruido neutrónico.

  • Olmo-Juan, Nicolás
  • Demazière, Christophe
  • Barrachina, Teresa|||0000-0001-8794-4204
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] En un reactor nuclear, se observan fluctuaciones en el registro de cualquier parámetro del proceso. La monitorización y la comprensión completa de esos parámetros permitirían detectar, utilizando la instrumentación existente y sin introducir perturbaciones externas al sistema, posibles anomalías antes de que tengan algún efecto indeseado en la seguridad y disponibilidad de la planta. Para el estudio y la simulación del ruido, es obligatorio desarrollar herramientas adecuadas. Sin embargo, los códigos basados en el dominio del tiempo existentes no se desarrollaron originalmente para este tipo de cálculos, por lo que resultará necesario realizar modificaciones en dichos códigos, así como el desarrollo de una intrincada metodología asociada para permitir dicho cálculo. En el trabajo propuesto, el código de difusión neutrónica basado en el dominio del tiempo PARCS se utiliza para simular el efecto de las perturbaciones estacionarias representativas de las fuentes de ruido neutrónico consideradas. Para la validación de la metodología desarrollada, se realizan comparaciones con los resultados obtenidos en el dominio de la frecuencia, mediante el uso de la herramienta CORE SIM, desarrollada en la Universidad de Tecnología de Chalmers. Se desarrollarán diversos casos de prueba basados en un modelo de reactor comercial para tales comparaciones y se establecerá una metodología que permita comparar las simulaciones en el dominio del tiempo frente a las simulaciones en el dominio de la frecuencia., Este trabajo se llevó a cabo en virtud del contrato predoctoral FPI Subprograma 1 y ayudas de movilidad de la Universitat Politècnica de Valencia y el apoyo del Ministerio de Ciencia e Innovación español en el marco del proyecto ENE2017-89029-P. La investigación que condujo a estos resultados también fue parcialmente financiada por el programa de investigación y capacitación Euratom 2014- 2018 bajo el acuerdo de subvención no 754316 (proyecto CORTEX).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lambda modes comparison for different approximations of the neutron transport equation: Diffusion, SN and SP3

  • Morató-Rafet, Sergio
  • Kochunas, B.
  • Larsen, E. W.
  • Downar, T.
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The methods presented in this paper solve the Simplified Spherical Harmonics approximation to the mul- tidimensional neutron transport equation. 1D, 2D and 3D systems were modeled with Cartesian geome- try using the finite difference method to discretize the spatial variables. The method is able to simulate any energy group discretization, including up-scattering terms. The Krylov Shur method was used to cal- culate the solution of the steady-state equation by solving a generalized eigenvalue problem. This methodology has the capability to calculate any number of eigenfunctions. A formulation review of the Simplified Spherical Harmonics is explained in this work, as well as, a study of the boundary condi- tions for different approaches of the finite difference method. The results calculated by this methodology are compared with the discrete ordinates and diffusion approximation methods, all of them, using the same spatial discretization in order to show the different accuracy of each method without influence of the method used for discretizing the spatial variable. The results show the validity of each method for different benchmark problems., This work has been partially supported by the Spanish Agencia Estatal de Investigacion [Grant No. BES-2016-076782], the Spanish Ministerio de Economia Industria y Competitividad [project ENE2015-68353-P], [project ENE2017-89029-P-AR] and [project PGC2018-096437-B-I00-AR].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modal methods for the neutron diffusion equation using different spatial modes

  • Carreño, Amanda|||0000-0003-2302-1157
  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The behaviour of the neutrons inside a nuclear reactor core can be modelled by using the time dependent neutron diffusion equation. Different time schemes have been used to integrate this equation. One possibility is to use a modal method, which is based on the expansion of the neutron flux in terms of spatial modes that are the eigenfunctions associated with a given configuration of the reactor core. Several spatial modes can be defined for the neutron diffusion equation such as the ¿, ¿ and ¿-modes. In this work, the ¿, the ¿ and the ¿-modes have been used to develop different modal kinetics equations, using a high order finite element method for the spatial discretization of the neutron diffusion equation. The performance of the different modal kinetic equations has been tested and compared using two 3D transient benchmark problems., This work has been partially supported by Spanish Ministerio de Economía y Competitividad under projects ENE2017-89029-P, MTM2017-85669P and BES-2015-072901.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Multilevel matrix-free preconditioner to solve linear systems associated with a the time-dependent SPN equations

  • Carreño, Amanda|||0000-0003-2302-1157
  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The evolution of the neutronic power inside of a nuclear reactor core can be approximated by means of the diffusive time-dependent simplified spherical harmonics equations (SPN). For the spatial discretization of these equations, a continuous Galerkin high order finite element method is applied to obtain a semi-discrete system of equations that is usually stiff. A semi-implicit time scheme is used for the time discretization and many linear systems are needed to be solved and previously, preconditioned. The aim of this work is to speed up the convergence of the linear systems solver with a multilevel preconditioner that uses different degrees of the polynomials used in the finite element method. Furthermore, as the matrices that appear in this type of system are very large and sparse, a matrix-free implementation of the preconditioner is developed to avoid the full assembly of the matrices. A benchmark transient tests this methodology. Numerical results show, in comparison with the block Gauss-Seidel preconditioner, an improvement in terms of number of iterations and the necessity of computational resources., This work has been partially supported by Spanish Ministerio de Economía y Competitividad under projects ENE2017-89029-P and MTM2017-85669-P. Furthermore, this work has been financed by the Generalitat Valenciana under the project PROMETEO/2018/035.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Methodology for neutronic uncertainty propagation and application to a UAM-LWR benchmark

  • Mesado, C.
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] This work covers an important point of the benchmark released by the expert group on Uncertainty Analysis in Modeling of Light Water Reactors (UAM-LWR). This ambitious benchmark aims to determine the uncertainty in LWR systems and processes in all stages of calculation, with emphasis on multi-physics (coupled) and multi-scale simulations. Specifically, in this work, a simplified BWR core is used to propagate the uncertainty of nuclear data. Due to a high computational cost in the analysis all fuel assemblies are modeled as fresh. The propagation is subdivided into two levels i) assembly level ¿with SCALE6.2.1 and SAMPLER module¿, and ii) core level, ¿with PARCSv3.2 and DAKOTA 6.3¿. The first level takes into account the uncertainties contained in the master library ENDF/B-VII.1 and as a result a problem-dependent neutronic library in NEMTAB format is obtained using TXT2NTAB code. This is a friendly Matlab code developed within this work. Finally, the uncertainty contained in the neutronic library is further propagated through PARCS. A different approach is presented in this work to propagate the uncertainty between codes. Following this approach only two neutronic libraries are generated, one with the average responses and the other with their standard deviations. Then, the standard deviation and a matrix of perturbation factors are used to perturb the main neutronic parameters. A parallel work is done to propagate the thermal-hydraulic parameters in a PWR core., The authors of this work thank IBERINCO (Iberdrola Ingenieria y Construcci.on, S. A.) for the shared data which made possible the validation of the lattice physics model. Moreover, this work was possible thanks to the UAM-LWR benchmark release, thanks to its organizers who requested the development of TXT2NTAB Matlab program. Finally, the authors sincerely thank to the Ministerio de Economia, Industria y Competitividad, Spain and the "Plan Nacional de IthornDthorni" for funding the projects NUC-MULTPHYS ENE2012-34585 and ENE2017-89029-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cross-Section Generation Using TXT2NTAB Code for Uncertainty Propagation with Burnup Dependence

  • Labarile, A.|||0000-0003-1610-7606
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Mesado, C.
[EN] One of the challenges of studying the neutronics of reactors is to generate reliable parameterized libraries that contain information to simulate the core in all possible operational and transient conditions. These libraries must include tables of cross sections and other neutronic and kinetic parameters and are obtained by simulating all the segments in a transport code. At the lattice level, one can use branch calculations to change ¿instantaneously¿ the feedback parameters as a function of burnup. When using random sampling for the lattice calculations, one can obtain statistical information about the output parameters and use it in a core simulation to characterize the accuracy of data estimating uncertainties when simulating a heterogeneous system at different scales of detail. This work presents the methodology to generate NEMTAB libraries from data obtained in the SCALE code system to be used in PARCS simulations. The code TXT2NTAB is used to reorder the cross-section tables in NEMTAB format and generate another NEMTAB of standard deviation. With these libraries, the authors perform a steady-state calculation for a light water reactor to propagate several uncertainties at the core level. The methodology allows obtaining statistical information of the most important output parameters: multiplication factor keff, axial power peak Pz, and axial peak node Nz., This work has been partially supported by Spanish Ministerio de Economia y Competitividad under projects ENE2017-89029-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A block Arnoldi method for the SPN equations

  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Carreño, Amanda|||0000-0003-2302-1157
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The simplified spherical harmonics equations are a useful approximation to the stationary neutron transport equation. The eigenvalue problem associated with them is a challenging problem from the computational point of view. In this work, we take advantage of the block structure of the involved matrices to propose the block inverse-free preconditioned Arnoldi method as an efficient method to solve this eigenvalue problem. For the spatial discretization, a continuous Galerkin finite element method implemented with a matrix-free technique is used to keep reasonable memory demands. A multilevel initialization using linear shape functions in the finite element method is proposed to improve the method convergence. This initialization only takes a small percentage of the total computational time. The proposed eigenvalue solver is compared to the standard power iteration method, the Krylov-Schur method and the generalized Davidson method. The numerical results show that it reduces the computational time to solve the eigenvalue problem., This work has been partially supported by Spanish Ministerio de Economia y Competitividad under projects ENE2017-89029-P, MTM2017-85669-P and BES-2015-072901. Moreover, it has been supported by the Catedra of the CSN Vicente Serradell
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Time-dependent simplified spherical harmonics formulations for a nuclear reactor system

  • Carreño, Amanda|||0000-0003-2302-1157
  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The steady-state simplified spherical harmonics equations (SPNequations) are a higher order approximation to the neutron transport equations than the neutron diffusion equation that also have reasonable computational demands. This work extends these results for the analysis of transients by comparing of two formulations of time-dependent SPN equations considering different treatments for the time derivatives of the field moments. The first is the full system of equations and the second is a diffusive approximation of these equations that neglects the time derivatives of the odd moments. The spatial discretization of these methodologies is made by using a high order finite element method. For the time discretization, a semi-implicit Euler method is used. Numerical results show that the diffusive formulation for the time-dependent simplified spherical harmonics equations does not present a relevant loss of accuracy while being more computationally efficient than the full system, This work has been partially supported by Spanish Ministerio de Economia y Competitividad under projects ENE2017-89029-P and MTM2017-85669-P. Furthermore, this work has been financed by the Generalitat Valenciana under the project PROMETEO/2018/035
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-order spherical harmonics-nodal collocation scheme for the numerical solution of the time-dependent radiative transfer equation

  • Capilla Romá, Maria Teresa|||0000-0002-8764-5754
  • Talavera Usano, César Félix|||0000-0002-8542-9097
[EN] The validity of the spherical harmonics-nodal collocation approximation to the stationary Boltzmann equation has been established in multi-dimensional neutron transport problems. This is a high-order approximation method that allows a coarse spatial discretization without losing accuracy. We extend the method to solve the time-dependent radiative transfer equation for absorbing media with anisotropic scattering, also incorporating to the model reflecting boundary conditions, due to the refractive index mismatching. The formalism is then applied to numerical test cases in one and two spatial dimensions that, using typical values in optical tomography for the physical parameters, check the accuracy and convergence of the method., Spanish Agencia Estatal de Investigacion (AEI) (ENE2017-89029-P-AR)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Appliance of scaling methodologies for designing counterpart experiments dominated by natural circulation phenomena

  • M. Lorduy|||0000-0002-8942-8278
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] The utility of the Integral Test Facilities (ITF) for the study of thermohydraulic phenomena that can occur in nuclear power plants has been demonstrated. However, direct extrapolation of data between different scales is challenged due to the uncertainty and distortion that implies the application of scaling laws. In this sense, the analyses of counterpart experiments help to clarify the capabilities and limitations of scaling methodologies. This work focuses on the design and study of a counterpart experiment in the LSTF facility based on the ATLAS A1.1 test. The transient at issue reproduces a SBO-type scenario with the asymmetric and delayed supply of auxiliary feedwater. The scenario in ATLAS and LSTF facilities is simulated with the TRACE5 thermal-hydraulic code and the results are compared. Then, a global system scaling analysis is performed and the calculation of dimensionless groups reveals, through an analytical approach, the relevance of the transfer processes (mass, enthalpy and so on) in the evolution of the transient and the scaling distortion between both facilities. This study assesses a great similarity in the evolution of the main thermal-hydraulic phenomena throughout the experiment, despite a significant discrepancy is evidenced in the chronology. Likewise, the results support the novel procedure to design the counterpart test., The authors are grateful to the Management Board of the OECD/ATLAS2 Project for their consent to this publication and thank the Spanish Nuclear Regulatory Body (CSN) for the technical and financial support under the agreement CAMP-Espana. Moreover, this work has been partially supported by the Spanish Ministerio de Ciencia e Innovacion under project N2017-89029-P