Pasar al contenido principal

VALIUN-3D: VERIFICACION, VALIDACION, MEJORA Y CUANTIFICACION DE INCERTIDUMBRE EN CODIGOS 3D-NTH PARA ANALISIS DE SEGURIDAD

ENE2011-22823

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Mejora del módulo cinético 1D en el código TRAC-BF1: implementación del método de colocación nodal unidimensional

  • Jambrina Gómez, Ana
  • Soler, Amparo
  • Concejal, Alberto
  • Barrachina, Teresa|||0000-0001-8794-4204
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
Para la discretización espacial de las ecuaciones de cinética se pueden utilizar el método de los elementos finitos, métodos en diferencias finitas y/o métodos nodales. El modelo de cinética unidimensional de TRAC-BF1 es una formulación en dos grupos basadas en el método analítico nodal (ANM-Analytic Nodal Method). El método de colocación nodal desarrollado para la ecuación de la difusión neutrónica y aplicable a la resolución de la cinética termohidráulica de TRAC-BF1, es una adaptación de los métodos de colocación clásicos para la discretización de ecuaciones en derivadas parciales, basados en el desarrollo de la solución como combinación lineal en base de funciones analíticas. Se ha optado por utilizar un método de colocación nodal basado en un desarrollo en polinomios de Legendre de los flujos neutrónicos en cada celda. Tras imponer las condiciones de continuidad y de contorno de los flujos y las corrientes de forma adecuada, este método permite transformar el problema de autovalores inicial asociado a un operador diferencial. La cualificación se ha llevado a cabo mediante el análisis del transitorio por disparo de turbina (ejercicio 3, escenario extremo3) del Benchmark de la NEA de la central nuclear de Peach Bottom; empleando para ello, tanto el módulo cinético 1D original implementado en TRAC-BF1, como el nuevo módulo cinético basado en el método de colocación nodal 1D., Este trabajo ha sido parcialmente financiado por el Ministerio de Educación y Ciencia en el proyecto ENE2011-22823 y por IBERDROLA Ingeniería y Construcción
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Moving meshes to solve the time-dependent neutron diffusion equation in hexagonal geometry

  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Fayez Moustafa Moawad, Ragab
To simulate the behaviour of a nuclear power reactor it is necessary to be able to integrate the time-dependent neutron diffusion equation inside the reactor core. Here the spatial discretization of this equation is done using a finite element method that permits h-p refinements for different geometries. This means that the accuracy of the solution can be improved refining the spatial mesh (h-refinement) and also increasing the degree of the polynomial expansions used in the finite element method (p-refinement). Transients involving the movement of the control rod banks have the problem known as the rod-cusping effect. Previous studies have usually approached the problem using a fixed mesh scheme defining averaged material properties. The present work proposes the use of a moving mesh scheme that uses spatial meshes that change with the movement of the control rods avoiding the necessity of using equivalent material cross sections for the partially inserted cells. The performance of the moving mesh scheme is tested studying one-dimensional and three-dimensional benchmark problems. (C) 2015 Elsevier B.V. All rights reserved., This work has been partially supported by the Spanish Ministerio de Ciencia e Innovacion under project ENE2011-22823, the Generalitat Valenciana under projects II/2014/08 and ACOMP/2013/237, and the Universitat Politecnica de Valencia under project UPPTE/2012/118.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modal decomposition method for BWR stability analysis using Alpha-modes

  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
[EN] In-phase and out-of-phase oscillations have been observed in BWR reactors. To improve the safety of these reactors it is necessary to detect in a reliable way these oscillations from the neutronic signals. In this paper, a methodology to decompose the neutronic signals in its modal amplitudes is proposed. Usually, to compute this decomposition the Lambda eigenfunctions are used as expansion functions and their adjoint modes are used as weight factors. Different approaches using the Alpha modes are investigated to obtain the LPRM signals modal decomposition for a BWR unstability event. The calculation of Alpha eigenmodes is reviewed and the oscillation parameters for the modal decomposition of the neutronic signals from Ringhals NPP have been calculated., This work has been partially supported by the Spanish Ministerio de Educación y Ciencia under Project ENE2011-22823.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the Core Exit Temperature and the Peak Cladding Temperature during a SBLOCA. Application to a scaled-up model

  • Querol, A.
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] During Loss-Of-Coolant Accidents (LOCA), operators may start Accident Management (AM) actions when the Core Exit Temperature (CET) measured by thermocouples exceeds a certain value. However, a significant time delay and temperature discrepancy in the superheat detection was observed in several facilities. This work is focused on clarifying CET thermocouple responses versus Peak Cladding Temperature (PCT) and to study if the same physical phenomena are reproduced in two TRACE5 models with different geometry (a Large Scale Test Facility (LSTF) and a scaled-up LSTF) during a pressure vessel upper head Small Break LOCA (SBLOCA). Results obtained show that the delay between the core uncover and the CET excursion is reproduced in both cases., The authors are grateful to the Management Board of the OECD-NEA ROSA Project; thus, this work contains findings produced within this project. This work is partially supported by the Grant-in-Aid for Scientific Research of the Spanish Ministerio de Educacion (Grant number: AP2009-2600), the Spanish Ministerio de Ciencia e Innovacion under Projects ENE2011-22823 and ENE2012-34585, and the Generalitat Valenciana under Projects PROMETEOII/2014/008 and ACOMP/2013/237.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simulation of a SBLOCA in a hot leg. Scaling considerations andapplication to a nuclear power plant

  • Querol Vives, Andrea
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
The main goal of this work is to study the physical phenomena observed during a Small Break Loss-Of-Coolant Accident transient performed in a small-scale Integral Test Facility and to determine the capabilityof the thermal hydraulic code TRACE5 to reproduce these phenomena in a scale-up model. The accidentscenario analyzed is based on Test 1.2 in the frame of the OECD/NEA ROSA Project, which simulatesa 1% hot leg Small Break Loss-Of-Coolant Accident in the Large Scale Test Facility of the Japan AtomicEnergy Agency. During this test, natural circulation in primary loops occurs, cooling the core during someminutes. This is an important phenomenon, which needs to be checked by means of different TRACE5models. With this aim, Test 1 2 has been simulated using a TRACE5 model reproducing the geometricaland thermal hydraulic features of Large Scale Test Facility. In order to determine if this phenomenon canbe reliably extrapolated to a scale-up plant, a new TRACE5 model has been developed. The geometricalfeatures of this scale-up model are determined using a fixed scaling ratio respect to the original LSTFfeatures. On the other hand, 4 and 3-loop standard Westinghouse PWR models are used in order tosimulate the same transient and compare the behaviour of the main thermal hydraulic variables withthose obtained in the Large Scale Test Facility model and in the Large Scale Test Facility scale-up model.Results show that both Large Scale Test Facility and the scale-up models present the same behaviourduring the whole transient. Important discrepancies are found in the results corresponding to 4 and3-loop PWR TRACE5 models. In both models, natural circulation is not properly reproduced. Trying toimprove the simulation results, the nodalizations of U-tubes and pressure vessel were tested. Resultsstate that the nodalization of U-tubes clearly affects the natural circulation simulation. However, thevessel nodalization effect is not as important., This work contains findings produced within the OECD-NEA ROSA Project. This work is partially supported by the Grant-in-Aid for Scientific Research of the Spanish Ministerio de Educacion (Grant number: AP2009-2600), the Spanish Ministerio de Ciencia e Innovacion under Projects ENE2011-22823 and ENE2012-34585 and the Generalitat Valenciana under Projects PROMETEO/2010/039 and ACOMP/2013/237.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solution of the Lambda modes problem of a nuclear power reactor using an h-p finite element method

  • Vidal-Ferràndiz, Antoni|||0000-0001-5449-7356
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Fayez Moustafa Moawad, Ragab
Lambda modes of a nuclear power reactor have interest in reactor physics since they have been used to develop modal methods and to study BWR reactor instabilities. An h–p-Adaptation finite element method has been implemented to compute the dominant modes the fundamental mode and the next subcritical modes of a nuclear reactor. The performance of this method has been studied in three benchmark problems, a homogeneous 2D reactor, the 2D BIBLIS reactor and the 3D IAEA reactor., This work has been partially supported by the Spanish Ministerio de Ciencia e Innovacion under project ENE2011-22823, the Generalitat Valenciana under projects PROMETEO/2010/039 and ACOMP/2013/237, and the Universitat Politecnica de Valencia under project UPPTE/2012/118.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Comparación de los resultados de quemado para reactores BWR con CASMO y SCALE 6.2 (TRITON/NEWT), Secciones eficaces obtenidas de un modelado BWR con el código de quemado SCALE 6.2 y comparación con CASMO

  • Mesado Melia, Carles
  • Soler, A.
  • Concejal, A.
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Barrachina, Teresa|||0000-0001-8794-4204
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
En este trabajo se comparan los resultados a partir de dos códigos de quemado CASMO y SCALE 6.2 (TRITON). Para ello, se simulan todos los segmentos correspondientes a un reactor de agua en ebullición (BWR) usando ambos códigos. Además, para tener en cuenta los diferentes puntos de trabajo, se repiten las simulaciones variando las variables instantáneas, estas son: fracción de huecos (6 puntos), temperatura del fuel (6 puntos) y barras de control (dos puntos), con un total de 72 posibles combinaciones de variables instantáneas distintas para cada segmento. Una vez todas las simulaciones para cada segmento han finalizado, se puede reordenar las secciones eficaces obtenidas, tanto de CASMO como SCALE, para crear una librería de composiciones en formato nemtab. Dicho formato es aceptado por el código neutrónico de difusión nodal PARCS v2.7. Finalmente se puede comparar los resultados obtenidos con PARCS y con la metodología SIMULATE3/SIMTAB a nivel del reactor completo. Por último, se ha hecho uso de los módulos KENOVI y MCDANCOFF pertenecientes a SCALE. El primero de ellos es un código Monte Carlo de transporte con el que se puede validar el valor del factor de multiplicación, el segundo se ha usado para obtener valores del factor Dancoff y aumentar la precisión del modelo de SCALE., Este trabajo ha sido parcialmente financiado por el Ministerio Español de Ciencia e Innovación mediante el proyecto ENE2011-22823, la Generalitat Valenciana mediante el proyecto PROMETEO/2010/039 y ACOMP/2013/237, y la Universitat Politècnica de València mediante el proyecto UPPTE/2012/118.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of discontinuity factors in high-order finite element methods

  • Vidal-Ferràndiz, Antoni
  • González Pintor, Sebastián
  • Asadzadeh, M.
  • Demazière, Christophe
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
The discontinuity factors are a technique widely used in nodal methods to minimize the error due to spatial homogenization of cross sections for a coarse mesh core calculation. In the present work, the introduction of discontinuity factors in a high-order finite element approximation of the neutron diffusion equation is investigated. More precisely, classical reference and assembly discontinuity factors are introduced in a discontinuous Galerkin finite element method stabilized using an interior penalty formulation for the neutron diffusion equation. The proposed method is tested solving different one- and two-dimensional benchmark problems, showing that the discontinuity factors technique can be successfully introduced in the discontinuous Galerkin formulation. (C) 2015 Published by Elsevier Ltd., The work performed by the second, fifth, and sixth author was financially supported by the Swedish Research Council (VR - Vetenskapsradet) within a framework grant called DREAM4SAFER (Development of Revolutionary and Accurate Methods for Safety Analyses of Future and Existing Reactors), research contract C0467701.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Preconditioning the solution of the time- dependent neutron diffusion equation by recycling Krylov subspaces

  • González Pintor, Sebastián
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Spectral preconditioners are based on the fact that the convergence rate of Krylov subspace methods is improved if the eigenvalues of smallest magnitude of the system matrix are `removed'. In this paper, two preconditioning strategies are studied to solve a set of linear systems associated with the numerical integration of the time dependent neutron di usion equation. Both strategies can be implemented using the matrix-vector product as the main operation and succeed at reducing the total number of iterations needed to solve the set of systems., This work has been partially supported by the Spanish Ministerio de Educacion y Ciencia under projects MTM2010-18674 and ENE2011-22823.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cross-Section Generation Using TXT2NTAB Code for Uncertainty Propagation with Burnup Dependence

  • Labarile, A.|||0000-0003-1610-7606
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Mesado, C.
[EN] One of the challenges of studying the neutronics of reactors is to generate reliable parameterized libraries that contain information to simulate the core in all possible operational and transient conditions. These libraries must include tables of cross sections and other neutronic and kinetic parameters and are obtained by simulating all the segments in a transport code. At the lattice level, one can use branch calculations to change ¿instantaneously¿ the feedback parameters as a function of burnup. When using random sampling for the lattice calculations, one can obtain statistical information about the output parameters and use it in a core simulation to characterize the accuracy of data estimating uncertainties when simulating a heterogeneous system at different scales of detail. This work presents the methodology to generate NEMTAB libraries from data obtained in the SCALE code system to be used in PARCS simulations. The code TXT2NTAB is used to reorder the cross-section tables in NEMTAB format and generate another NEMTAB of standard deviation. With these libraries, the authors perform a steady-state calculation for a light water reactor to propagate several uncertainties at the core level. The methodology allows obtaining statistical information of the most important output parameters: multiplication factor keff, axial power peak Pz, and axial peak node Nz., This work has been partially supported by Spanish Ministerio de Economia y Competitividad under projects ENE2017-89029-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

GPU based algorithms in CT imaging

  • Flores, Liubov Alexandrovna
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] In X-ray computed tomography (CT) imaging, projections taken by a scanner are used to reconstruct the internal structure of an object. Due to the complexity of the data, the problem of reconstruction is a time consuming process. Although modern processors have gained sufficient power to be competitive in 2D reconstruction, it is not the case for 3D reconstruction especially when iterative methods are used. Today, the technology allows reducing this drawback effectively. In this work we compare two iterative algorithms of image reconstruction based on GPU implementation., This work was partially funded by ANITRAN PROMETEO/2010/039, the Spanish Ministry of Science and Innovation (Project ENE2011-22823, TIN2011-26254).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis del evento de inestabilidad en el reactor BWR OSKARSHAMN-2

  • Garcia-Fenoll, Marina
  • Barrachina, Teresa|||0000-0001-8794-4204
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
En este trabajo se presenta el análisis del evento de inestabilidad sucedido el 25 de Febrero de 1999 en el reactor tipo BWR Oskarshamn-2. Los datos de este evento se recogen en `OECD/NEA O2 BWR Stability Coupled Code Calculations and Uncertainty Analysis Modelling Benchmark¿. El análisis de estabilidad es un campo de gran importancia, y en particular este evento supone un reto en la simulación de inestabilidades mediante códigos acoplados. Se trata del estudio de un evento de inestabilidad producido por un error en la lógica de control que ante una situación de rechazo de carga envía la señal a turbina, causando el disparo de esta, pero no al reactor. Tras diversas actuaciones de los sistemas de seguridad, se alcanza un punto inestable del mapa potencia/caudal, produciéndose oscilaciones divergentes en la potencia hasta que se da el SCRAM manual del reactor. Se han escogido los códigos acoplados RELAP/PARCS para la simulación del evento. El modelo termohidráulico del núcleo en RELAP se ha realizado a partir del análisis de los modos lambda del núcleo (fundamental y primer y segundo armónico) para obtener un mapping adecuado y reducir el número de canales termohidráulicos del modelo del núcleo. Los modos lambda se han obtenido mediante el código VALKIN desarrollado en la UPV. El modelo neutrónico se realiza canal a canal, Este proyecto ha sido financiado por el Ministerio de Economía y Competitividad de España a través del proyecto EN2011-22823
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis del evento de inestabilidad en Oskarshamn-2 con el código acoplado 3D TRACEv5.0P3/PARCSv3.0

  • Garcia-Fenoll, Marina
  • Barrachina, Teresa|||0000-0001-8794-4204
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] En este trabajo se presenta el análisis del evento de inestabilidad sucedido en la central nuclear Oskarshamn-2 en 1999, como parte del benchmark de estabilidad la OECD/NEA basado en él. El objeto de este análisis es simular el evento registrado mediante el código acoplado 3D neutrónico-termohidráulico TRACEv5.0P3/PARCSv3.0., [EN] In this work, an analysis of the instability event in Oskarshamn-2 nuclear power plant in 1999 is presented, as our contribution to the OECD/NEA stability Benchmark based on it. The objective of this analysis is to simulate the event with the 3D neutronic-thermalhydraulic coupled code TRACEv5.0P3/PARCSv3.0., Este trabajo ha sido financiado por el Ministerio de Economía y Competitividad de España a través del proyecto EN2011-22823.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Post-test analysis of the ROSA/LSTF and PKL counterpart tests

  • Carlos Alberola, Sofía|||0000-0002-0637-325X
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Sanchez Saez, Francisco|||0000-0002-3011-9884
  • Villanueva López, José Felipe|||0000-0002-7684-6884
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Querol, A.
[EN] Experimental facilities are scaled models of commercial nuclear power plants, and are of great importance to improve nuclear power plants safety. Thus, the results obtained in the experiments undertaken in such facilities are essential to develop and improve the models implemented in the thermal-hydraulic codes, which are used in safety analysis. The experiments and inter-comparisons of the simulated results are usually performed in the frame of international programmes in which different groups of several countries simulate the behaviour of the plant under the accidental conditions established, using different codes and models. The results obtained are compared and studied to improve the knowledge on codes performance and nuclear safety. Thus, the Nuclear Energy Agency (NEA), in the nuclear safety work area, auspices several programmes which involve experiments in different experimental facilities. Among the experiments proposed in NEA programmes, one on them consisted of performing a counterpart test between ROSA/LSTF and PKL facilities, with the main objective of determining the effectiveness of late accident management actions in a small break loss of coolant accident (SBLOCA). This study was proposed as a result of the conclusion obtained by the NEA Working Group on the Analysis and Management of Accidents, which analyzed different installations and observed differences in the measurements of core exit temperature (CET) and maximum peak cladding temperature (PCT). In particular, the transient consists of a small break loss of coolant accident (SBLOCA) in a hot leg with additional failure of safety systems but with accident management measures (AM), consisting of a fast secondary-side depressurization, activated by the CET. The paper presents the results obtained in the simulations for both installations using TRACE, observing, in general, a good agreement with the experiments. However, ROSA/LSTF calculations underestimated the maximum PCT value, what might be explained by the higher core level predicted in the simulation compared with the experiment. In PKL calculations, PCT maximum value is slightly higher than in the experiment, and the core level predicted is lower. In the comparison of the evolution of both installations a different timing in the transient events is observed, due to the difference in the pressure vessel design. Thus, when PKL vessel is modified with some of the ROSA/LSTF features, the evolution of the new PKL model behaviour is closer the one observed in ROSA/LSTF calculations. (C) 2015 Elsevier B.V. All rights reserved., This paper contains findings that were produced within the OECD-NEA ROSA and PKL Projects. The authors are grateful to the Management Boards of the ROSA and PKL Projects for their consent to this publication. This work is partially supported by the Grant-in-Aid for Scientific Research of the Spanish Ministerio de Educacion (Grant number: AP2009-2600), the Spanish Ministerio de Ciencia e Innovacion under Project ENE2011-22823, by the Grant-in-Aid for Scientific Research of the Vicerrectorado de Investigacion, Innovacion and Transferencia of the Universitat Politecnica de Valencia, by the Consejo de Seguridad Nuclear under project CSN-SIN/4078/2013/640 and by the Generalitat Valenciana under Project PROMETEOII/2014/008.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Validation of 3D neutronic-thermalhydraulic coupled codes RELAP5/PARCSv2.7 and TRACEv5.0P3/PARCSv3.0 against a PWR control rod drop transient

  • Garcia-Fenoll, Marina
  • Mesado Melia, Carles
  • Bermejo, Juan Antonio
  • López, Arturo
  • Ortego, Alberto
  • Barrachina, Teresa|||0000-0001-8794-4204
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] In nuclear safety field, neutronic and thermalhydraulic codes performance is an important issue. New capabilities implementation, as well as models and tools improvements are a significant part of the community effort in looking for better Nuclear Power Plants (NPP) designs. A procedure to analyze the PWR response to local deviations on neutronic or thermalhydraulic parameters is being developed. This procedure includes the simulation of Incore and Excore neutron flux detectors signals. A control rod drop real plant transient is used to validate the used codes and their new capabilities. Cross-section data are obtained by means of the SIMTAB methodology. Detailed thermalhydraulic models were developed: RELAP5 and TRACE models simulate three different azimuthal zones. Besides, TRACE model is performed with a fully 3D core, thus, the cross-flow can be obtained. A cartesian vessel represents the fuel assemblies and a cylindrical vessel the bypass and downcomer. Simulated detectors signals are obtained and compared with the real data collected during a control rod drop trial at a PWR NPP and also with data obtained with SIMULATE-3K code., The authors would like to acknowledge the economic support provided by Centrales Nucleares Almaraz-Trillo (CNAT) and IBERDROLA Ingeniería y Construcción (Iberinco) for the realization of this work, and express their great appreciation to Arturo López, Juan Antonio Bermejo and Alberto Ortego for their valuable collaboration and their willingness to develop this work. This work has also been supported by the Spanish Ministerio de Economía y Competitividad, through the projects NUC-MULTPHYS (ENE2012-34585) and VALIUN-3D (ENE2011-22823), and the Generalitat Valenciana (GVA), through the project PROMETEO II/2014/008.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Resolution of the generalized eigenvalue problem in the neutron diffusion equation discretized by the finite volume method

  • Bernal García, Álvaro
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
Numerical methods are usually required to solve the neutron diffusion equation applied to nuclear reactors due to its heterogeneous nature. The most popular numerical techniques are the Finite Difference Method (FDM), the Coarse Mesh Finite Difference Method (CFMD), the Nodal Expansion Method (NEM), and the Nodal Collocation Method (NCM), used virtually in all neutronic diffusion codes, which give accurate results in structured meshes. However, the application of these methods in unstructured meshes to deal with complex geometries is not straightforward and it may cause problems of stability and convergence of the solution. By contrast, the Finite Element Method (FEM) and the Finite Volume Method (FVM) are easily applied to unstructured meshes. On the one hand, the FEM can be accurate for smoothly varying functions. On the other hand, the FVM is typically used in the transport equations due to the conservation of the transported quantity within the volume. In this paper, the FVM algorithm implemented in the ARB Partial Differential Equations solver has been used to discretize the neutron diffusion equation to obtain the matrices of the generalized eigenvalue problem, which has been solved by means of the SLEPc library., This work has been partially supported by the Spanish Ministerio de Ciencia e Innovacion under Projects ENE2011-22823 and ENE2012-34585, the Generalitat Valenciana under Projects PROMETEO/2010/039 and ACOMP/2013/237, and the Universitat Politecnica de Valencia under Project UPPTE/2012/118.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nodal collocation method for the multidimensional PL equations applied to neutron transport source problems

  • Capilla Romá, Maria Teresa|||0000-0002-8764-5754
  • Talavera Usano, César Félix|||0000-0002-8542-9097
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
A PL spherical harmonics-nodal collocation method is applied to the solution of the multidimensional neutron source transport equation. Vacuum boundary conditions are approximated by setting Marshak's conditions. The method is applied to several 1D, 2D and 3D problems with isotropic fixed source and with isotropic and anisotropic scattering. These problems are chosen to test this method in limit conditions, showing that in some cases a high order $P_L$ approximation is required to obtain accurate results and convergence. Results are also compared with the ones provided by several reference codes showing good agreement. It is also shown that Marshak's approximation to vacuum boundary conditions gives the same results that simulating vacuum with a purely absorbing medium and setting zero flux boundary conditions., This work has been partially supported by the Spanish Ministerio de Economia y Competitividad under project ENE2011-22823, and the Generalitat Valenciana under project PROMETEO11/2014/008.