Pasar al contenido principal

CLUSTERES MULTIMETALICOS Y SUBNANOMETRICOS SOPORTADOS: SINTESIS, ESTRUCTURA Y DINAMISMO ATOMICO, Y EMPLEO COMO CATALIZADORES EN LA VALORIZACION DE METANO Y ALCANOS LIGEROS

RTI2018-096399-A-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 56
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Direct Conversion of Syngas to Higher Alcohols via Tandem Integration of Fischer-Tropsch Synthesis and Reductive Hydroformylation

  • Jeske, Kai
  • Rösler, Thorsten
  • Maurice Belleflamme
  • Nico Fischer
  • Michael Claeys
  • Walter Leitner
  • Andreas J. Vorholt
  • Ródenas Torralba, Tania
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] The selective conversion of syngas to higher alcohols is an attractive albeit elusive route in the quest for effective production of chemicals from alternative carbon resources. We report the tandem integration of solid cobalt Fischer-Tropsch and molecular hydroformylation catalysts in a one-pot slurry-phase process. Unprecedented selectivities (>50 wt %) to C2+ alcohols are achieved at CO conversion levels >70 %, alongside negligible CO2 side-production. The efficient overall transformation is enabled by catalyst engineering, bridging gaps in operation temperature and intrinsic selectivity which have classically precluded integration of these reactions in a single conversion step. Swift capture of 1-olefin Fischer-Tropsch primary products by the molecular hydroformylation catalyst, presumably within the pores of the solid catalyst is key for high alcohol selectivity. The results underscore that controlled cooperation between solid aggregate and soluble molecular metal catalysts, which pertain to traditionally dichotomic realms of heterogeneous and homogeneous catalysis, is a promising blueprint toward selective conversion processes., This work received funding from the German Ministry for Education and Research (BMBF, 01DG17019 CAT2BIOL) and the European Research Council (ERC-2019-COG 864195, TANDEng). Parts of this research have also received funding from the Spanish Ministry of Science and Innovation (RTI2018-096399-A-100), the EU Horizon 2020 research and innovation programme under Grant Agreement no. 817612 (REDIFUEL) and the Max Planck Society. W.L. acknowledges the "Fuel Science Center", funded by the German Research Foundation (DFG) (grant Nr. 390919832), for continuing support. Sasol and Eurosupport are thanked for the provision of Al<INF>2</INF>O<INF>3</INF> precursors. Prof. F. Schuth (MPI-KOFO) is gratefully thanked for lab space allocation and supportive access to research instrumentation. A. Gurowski (MPI-CEC), N. Pfander (MPI-CEC), V. Dietl (MPI-KOFO) and M. Fadlalla (UCT) are acknowledged for contributions to ICP-MS, STEM/EDS, offline GC and 2DGC analyses, respectively. Staff of the EM unit at the UPV are acknowledged for technical assistance with microscopy characterization. Open Access funding enabled and organized by Projekt DEAL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Configurational landscape of chiral iron(II) bis(phosphane) complexes

  • Estevan, Francisco
  • Feliz Rodriguez, Marta|||0000-0002-4429-0551
[EN] The reaction of a chiral [FeH(¿2-H2){(R,R)-Me-DuPhos}2]+ ((R,R)-Me-DuPhos = (¿)-1,2-bis[(2R,5R)-2,5-dimethylphospholano]benzene) complex with ethers and halides is investigated by NMR techniques. From this study, it is apparent that dihydrogen ligand exchange by poorly-coordinating donor molecules, such as THF or Et2O, is feasible under mild conditions. The cis-[FeH(THF-d8){(R,R)-Me-DuPhos}2]+ complex is identified as the product in THF-d8 solution. A mixture of cis- and trans-[FeH(ether){(R,R)-Me-DuPhos}2]+ isomers is obtained after the addition of small quantities of THF or Et2O to a CD2Cl2 solution of [FeH(¿2-H2){(R,R)-Me-DuPhos}2]+. The reaction of [FeH(¿2-H2){(R,R)-Me-DuPhos}2]+ with an excess of iodide or chloride salts in THF-d8 or CD2Cl2 affords initially cis- and trans-[FeHX{(R,R)-Me-DuPhos}2] (X = Cl or I) isomers. The trans complex is the thermodynamic product obtained when X = Cl, whereas the cis isomer is obtained when X = I. These complexes evolve with time, and the pentacoordinated [FeX{(R,R)-Me-DuPhos}2](A) (X = Cl, A = BF4; X = A = I) and hexacoordinated trans-[FeCl2{(R,R)-Me-DuPhos}2] compounds are obtained as air-stable crystals and identified by X-ray diffraction and NMR techniques. Experiments done with (S,S)-Me-DuPhos ((+)-1,2-bis[(2S,5S)-2,5-dimethylphospholano]benzene) gave similar results, and the [FeI{(S,S)-Me-DuPhos}2](ClO4) compound has been crystallographically characterized., This research was supported by the Severo Ochoa Program (SEV-2016-0683), Ministerio de Ciencia e Innovacion (RTI2018-096399), and the Consejo Superior de Investigaciones Cientificas (CSIC) of the Universitat de Valencia. We would like to thank the Servei Central d'Instrumetacion Cientifica (SCIC) of the Universitat Jaume I for the X-ray facilities and the Servicio Central de Apoyo a la Investigacion Experimental (SCSIE) of the Universitat de Valencia for the NMR facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cobalt Metal Organic Framework Based on Two Dinuclear Secondary Building Units for Electrocatalytic Oxygen Evolution

  • Gutiérrez-Tarriño, Silvia
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Olloqui Sariego, José Luis
  • Calvente, Juan José
  • Mínguez Espallargas, Guillermo
[EN] The synthesis of a new microporous metal-organic framework (MOF) based on two secondary building units, with dinuclear cobalt centers, has been developed. The employment of a well-defined cobalt cluster results in an unusual topology of the Co-2-MOF, where one of the cobalt centers has three open coordination positions, which has no precedent in MOF materials based on cobalt. Adsorption isotherms have revealed that Co-2-MOF is in the range of best CO2 adsorbents among the carbon materials, with very high CO2/CH4 selectivity. On the other hand, dispersion of Co-2-MOF in an alcoholic solution of Nafion gives rise to a composite (Co-2-MOF@Nafion) with great resistance to hydrolysis in aqueous media and good adherence to graphite electrodes. In fact, it exhibits high electrocatalytic activity and robustness for the oxygen evolution reaction (OER), with a turnover frequency number value superior to those reported for similar electrocatalysts. Overall, this work has provided the basis for the rational design of new cobalt OER catalysts and related materials employing well-defined metal clusters as directing agents of the MOF structure., The authors thank Prof. Avelino Corma for discussion and support, and J. Mazario for XPS analysis and discussion. Program Severo Ochoa SEV-2016-0683 is gratefully acknowledged. S.G.-T. thanks MINECO for a FPU Ph.D. fellowship FPU16/02117. P.O.-B. thanks MEC for his Ramon y Cajal contract RYC-2014-16620. The authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, RTI2018-101784-B-I00, and CTQ2014-52641-P). In addition, P.O.-B. thanks UPV for his grant PAID-06-18/SP20180172. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A tandem process for in situ H2O2 formation coupled with benzyl alcohol oxidation using Pd-Au bimetallic catalysts

  • Martínez, Jordan Santiago
  • Mazarío, Jaime
  • Galdeano-Ruano, Carmen Piedad
  • Gutiérrez-Tarriño, Silvia
  • Gaona Miguélez, José Antonio
  • Domine, Marcelo Eduardo
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Alcohol oxidation is one of the most important industrial organic reactions. Traditionally, the best-suited catalysts are Pd, Pt and Au supported nanoparticles. The research community has recently started developing strategies for synthesizing carbon-supported Pd/Au bimetallic nanoparticles (NPs), leading to higher activities and selectivities. However, the metallic active species in these catalysts are usually generated using sodium borohydride (NaBH4), which is not synthetically easy to reproduce. In fact, minor modifications in pH, concentration and/or other parameters have a prominent effect on the nature of the promoted material. In this work, a robust process involving dihydrogen flow (H2) at 200 °C as a reducing agent for synthesizing Pd/Au supported bimetallic materials was considered an alternative to the common pathway. The physicochemical properties of the materials derived from different reducing reagents and of varying composition ranges were studied using HR-TEM, XRD, CO chemisorption, and XPS. Their stability and activity were also tested for benzyl alcohol oxidation to benzaldehyde under mild reaction conditions (60 °C, water as the solvent, and PO2 = 1.5 bar). Notably, a catalyst from the hydrogen reduction process with a metal composition of 0.8%Pd¿0.2%Au/C consisting of bimetallic clusters (¿1.5 nm) proved to be the best material (C = 94%, S = 99%). Catalytic performances were strongly correlated with structural properties, such as nanoparticle size and distribution, which, in turn, were affected by the reduction step and the metal composition range. Finally, the influence of oxidants on benzyl alcohol oxidation has also been studied, along with the first approach for the tandem in situ formation of H2O2 coupled with alcohol oxidation., The authors are thankful for the financial support by the Spanish Government (RTI2018-096399-A-I00 and PGC2018-097277-B-I00 funded by MICINN/AEI/10.13039/501100011033) and Junta de Andalucia (P20 01027 and PYC 20 RE 060 UAL). The electron microscopy service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Synthesis and Applications of N-Doped Carbon Supported Pd-Based Bimetallic Nanoparticles by Synergistic Chemical and Thermal Modifications of MOFs

  • Martínez, Jordan Santiago
[ES] Esta tesis presenta el desarrollo de procesos catalíticos sostenibles mediante el uso de catalizadores heterogéneos avanzados, centrándose en la síntesis de composites derivados de MOFs para la semihidrogenación selectiva de alquinos y la división electroquímica del agua. Inicialmente, se investigó una nueva metodología para convertir PdIn-MOF en nanopartículas soportadas en carbono dopado con nitrogeno. La combinación de tratamientos químico y térmicos permitió obtener el composite PdIn-QT, destacable por su estabilidad y control estructural. Además, el estudio demostró que las propiedades de las nanopartículas y del carbono se pueden controlar ajustando la polaridad del disolvente y seleccionando tipos específicos de aminas. Después de la elaboración de los nuevos precursores basados en MOFs de PdCo y PdMn, se aplicó nuestra estrategia de transformación de MOFs recientemente desarrollada, basada en la combinación de tratamientos químicos y térmicos. Posteriormente, se emplearon estos nuevos catalizadores basados en PdCo, PdMn, y PdIn para la hidrogenación selectiva de fenilacetileno, logrando alta estabilidad y selectividad. En particular, el PdCo-QT mostró un rendimiento excepcional en procesos en continuo en fase gaseosa, subrayándose su potencial para posibles aplicaciones industriales. Finalmente, estos materiales se utilizaron como electrodos y mostraron un rendimiento competitivo en comparación con catalizadores de referencia en las reacciones de evolución de hidrógeno y oxígeno (HER y OER). En particular, PdCo-QT, con su alta eficiencia y estabilidad, demostró un gran potencial para aplicaciones sostenibles en la división del agua. En resumen, este trabajo introduce una nueva familia de catalizadores con propiedades ajustables, adecuados tanto para la catálisis industrial como para aplicaciones en generación de energía limpia., [CA] Aquesta tesi presenta el desenvolupament de processos catalítics sostenibles mitjançant l'ús de catalitzadors heterogenis avançats, centrant-se en la síntesi de composites derivats de MOFs per a la semihidrogenació selectiva d'alquins i la divisió electroquímica de l'aigua. Inicialment, es va investigar una nova metodologia per a convertir PdIn-MOF en nanopartícules suportades en carboni. La combinació dels tractaments químic i tèrmic va permetre obtindre el composite PdIn-QT, destacat per la seua estabilitat i control estructural. A més, l'estudi va demostrar que les propietats de les nanopartícules i del carboni es controlen ajustant la polaritat del dissolvent i seleccionant tipus específics d'amines. Després de l'elaboració de nous precursors basats en MOFs de PdCo i PdMn, es va aplicar la nostra estratègia de transformació de MOFs recentment desenvolupada, basada en la combinació de tractaments químics i tèrmics. Posteriorment, es van emprar aquestes catalitzadors basats en PdCo, PdMn i PdIn per a la hidrogenació selectiva del fenilacetilè, aconseguint una alta estabilitat i selectivitat. En particular, el PdCo-QT va mostrar un rendiment excepcional en processos en continu en fase gasosa, subratllant-se el seu potencial per a aplicacions industrials. Finalment, aquests materials, quan s'utilitzaren com a elèctrodes, van mostrar un rendiment competitiu en comparació amb els catalitzadors de referència en les reaccions d'evolució d'hidrogen i oxigen (HER i OER). En particular, el PdCo-QT, amb la seua alta eficiència i estabilitat, va demostrar un gran potencial per a aplicacions sostenibles en la divisió de l'aigua. En resum, aquest treball introdueix una nova família de catalitzadors amb propietats ajustables, adequats tant per a la catàlisi industrial com per a aplicacions de generació d'energia neta., [EN] This thesis develops sustainable catalytic processes using advanced heterogeneous catalysts based on the preparation of MOF-derived composites for selective semi-hydrogenation of alkynes and electrochemical water-splitting applications. Precisely, new methods were followed to transform PdIn-MOF into N-doped carbon-supported nanoparticles. First, a combined chemical and thermal treatment afforded the PdIn-QT composite, which has been distinguished by its stability and structural control. The material was thoroughly compared to the material resulting from the traditional direct pyrolysis method. Then, the study demonstrates that the properties of nanoparticles and carbon can be improved by optimizing solvent polarity and the type of amines involved during the chemical transformation. Later, after the elaboration of the new PdCo, and PdMn MOF precursors, our newly developed MOF transformation strategy was applied. The resulting PdCo, PdMn, and PdIn-based catalysts were used in the selective hydrogenation of phenylacetylene. They showed excellent selectivity at quantitative conversion levels, with high stability. Among them, PdCo-QT showed excellent activity in continuous gas-phase processes, indicating its potential in industrial applications. Lastly, the first-row transition metal-based materials were tested as electrodes and showed competitive performance against benchmark catalysts in hydrogen and oxygen evolution reactions (HER and OER). Specifically, PdCo-QT showed highly efficient and stable performance, with great potential for sustainable water-splitting applications. In conclusion, this study reports on a new family of tunable catalysts suitable for both industrial catalysis and clean energy applications., I want to thank the financial support received from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41 and TED2021-130191B-C44 funded by MCIN/AEI/ 10.13039/501100011033. This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507 and NextGenerationEU/PRTR). HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CLAESS and NOTOS beamlines at ALBA Synchrotron in collaboration with ALBA staff.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient Alkyne Semihydrogenation Catalysis Enabled by Synergistic Chemical and Thermal Modifications of a PdIn MOF

  • Martínez, Jordan Santiago
  • Mazarío, Jaime
  • Wittee Lopes, Christian
  • Trasobares, Susana
  • Calvino Gamez, José Juan
  • Agostini, Giovanni
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Recently, there has been a growing interest in using MOF templating to synthesize heterogeneous catalysts based on metal nanoparticles on carbonaceous supports. Unlike the common approach of direct pyrolysis of PdIn-MOFs at high temperatures, this work proposes a reductive chemical treatment under mild conditions before pyrolysis (resulting in PdIn-QT). The resulting material (PdIn-QT) underwent comprehensive characterization via state-of-the-art aberration-corrected electron microscopy, N2 physisorption, X-ray absorption spectroscopy, Raman, X-ray photoelectron spectroscopy, and X-ray diffraction. These analyses have proven the existence of PdIn bimetallic nanoparticles supported on N-doped carbon. In situ DRIFT spectroscopy reveals the advantageous role of indium (In) in regulating Pd activity in alkyne semihydrogenation. Notably, incorporating a soft nucleation step before pyrolysis enhances surface area, porosity, and nitrogen content compared to direct MOF pyrolysis. The optimized material exhibits outstanding catalytic performance with 96% phenylacetylene conversion and 96% selectivity to phenylethylene in the fifth cycle under mild conditions (5 mmol phenylacetylene, 7 mg cat, 5 mL EtOH, R.T., 1 H2 bar)., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, and TED2021-130191B-C44) funded by MCIN/AEI/10.13039/501100011033. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507 and NextGenerationEU/PRTR). HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CLAESS and NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Carlos Escudero, Carlo Marini). J.M. Salas is acknowledged for experimental contributions to FTIR measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bottom-up assembly of bimetallic nanocluster catalysts from oxide-supported single-atom precursors

  • Sarma, Bidyut B.
  • Agostini, Giovanni
  • Garcia-Farpon, Marcos
  • Marini, Carlo
  • Pfaender, Norbert
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] The precise synthesis and stabilization of oxide-supported bimetallic clusters in the low-to-sub nanometer size regime is highly relevant in various fields, from optics and sensing to electrochemistry and catalysis. In surface-driven phenomena such as catalysis, avoiding metal segregation and agglomeration is essential for performance and stability under relevant operation conditions. Here we show how high-temperature oxidative crystal redispersion and oxide atom-trapping phenomena provide a widely valid route towards atomically dispersed bimetallic precursors which, upon reductive metal agglomeration, result in very small, uniformly sized and remarkably stable bimetallic clusters. For a PdPt/MgO system, oxidative redispersion leads to isolated Pd and Pt atoms stabilized by the MgO support up to overall surface metal contents of ca. 1.0 M-at nm(-2), beyond which loading, atom-trapping oxide sites become exhausted and metal aggregation sets in. On the contrary, more conventional, milder-temperature activation protocols lead to significant metal segregation and markedly bimodal particle size populations already from comparatively lower metal contents. As proven by in situ X-ray absorption spectroscopy and atomic-resolution STEM microscopy, the stabilization of isolated Pd and Pt cations within nanometer distances on the common MgO support is essential for the synthesis of ca. 1 nm bimetallic PdPt clusters by reductive agglomeration. The uniformly sized PdPt aggregates developed on MgO from single-atom precursors display a notably higher activity for the oxidative activation of methane with carbon dioxide (dry reforming) at 923 K compared to analogue materials synthesized via milder calcination/reduction protocols. Moreover, despite their high surface-to-volume ratio, the small bimetallic clusters in the former display an outstanding stability against metal agglomeration under the demanding reaction conditions, likely as a result of a lower driving force for Ostwald ripening growth processes. The synthesis concept, which is amenable to other combinations of 4d and 5d transition metals, contributes to the rationalization of the possibilities and bounds of oxidative metal redispersion phenomena and provides a technically simple and potentially general route to high-temperature stable, (sub)nanometer bimetallic clusters for catalysis and other applications where bimetallic effects and thermal stability are of importance., XAS experiments were performed at the CLAESS BL22 beamline of the ALBA Light Source, Cerdanyola del Vall¿es, Spain: experiment 2019023278. The authors are grateful to beamline staff members, as well as to E. Andr¿es, M. E. Mart¿¿nez-Monje and I. L¿opez-Luque (ITQ) for assistance with XAS measurements. J. Ternieden (MPI-KOFO) is acknowledged for XRD measurements. M. Mayer (MPI-KOFO) is thanked for his assistance with the synthesis of the MgO support. P. N. Plessow and F. Studt (KIT) are gratefully acknowledged for the development of the DFT-optimized structural models used in EXAFS datatting. Authors are grateful to Prof. Ferdi Schuth for providing lab facilities and supportive access to analytical methods at the MPI-KOFO. This research received funding from the Max Planck Society and the Spanish Ministry of Science and Innovation (RTI2018-096399-A-100 and SEV-2016-0683). B. B. S. acknowledges the Alexander von Humboldt Foundation for a postdoctoral grant. M. G. F. acknowledges the Spanish Ministry of Science, Innovation and Universities for a FPU predoctoral scholarship (FPU17/04701). Open Access funding provided by the Max Planck Society.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cobalt nanoclusters coated with N-doped carbon for chemoselective nitroarene hydrogenation and tandem reactions in water

  • Gutiérrez-Tarriño, Silvia
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Rojas-Buzo, Sergio
  • Lopes, Christian W.
  • Agostini, Giovanni
  • Calvino, José J.
[EN] The development of active and selective non-noble metal-based catalysts for the chemoselective reduction of nitro compounds in aquo media under mild conditions is an attractive research area. Herein, the synthesis of subnanometric and stable cobalt nanoclusters, covered by N-doped carbon layers as core shell (CoaNC-800), for the chemoselective reduction of nitroarenes is reported. The Co@NC-800 catalyst was prepared by the pyrolysis of the Co(tpy)(2) complex impregnated on Vulcan carbon. In fact, the use of a molecular complex based on six N-Co bonds drives the formation of a well-defined and distributed cobalt core-shell nanocluster covered by N-doped carbon layers. In order to elucidate its nature, it has been fully characterized by using several advanced techniques. in addition, this as-prepared catalyst showed high activity, chemoselectivity and stability toward the reduction of nitro compounds with H-2 and under mild reaction conditions; water was used as a green solvent, improving the previous results based on cobalt catalysts. Moreover, the Co@NC-800 catalyst is also active and selective for the one-pot synthesis of secondary aryl amines and isoindolinones through the reductive amination of nitroarenes. Finally, based on diffraction and spectroscopic studies, metallic cobalt nanoclusters with surface CoNx patches have been proposed as the active phase in the Co@NC-800 material., The authors acknowledge the financial support from the Spanish Government (RTI2018-096399-A-I00) and the Program Severo Ochoa SEV-2016-0683. S. G. T. is thankful to MINECO for her FPU Ph.D. contract FPU16/02117. P. O.-B. is thankful to MICCIN for his Ramon y Cajal contract RYC-2014-16620 and to UPV for the grant PAID-06-18/SP20180172 The High-Resolution STEM data were recorded at the DME-UCA node of the ELECMI ICTS Spanish National Infrastructure for Electron Microscopy of Materials. JJC acknowledges financial support from MINECO/FEDER (Project MAT2017-97579-R). C. W. L. acknowledges the Visiting Researcher Fellowship from PRH 50.1 - ANP/FINEP Human Resources Program (Brazil).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring the electron density of cobalt oxide clusters to provide highly selective superoxide and peroxide species for aerobic cyclohexane oxidation

  • Gutiérrez-Tarriño, Silvia
  • Gaona Miguélez, José Antonio
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The catalytic aerobic cyclohexane oxidation to cyclohexanol and cyclohexanone (KA oil) is an industrially relevant reaction. This work is focused on the synthesis of tailor-made catalysts based on the well-known Co4O4 core in order to successfully deal with cyclohexane oxidation reaction. The catalytic activity and selectivity of the synthesized catalysts can be correlated with the electronic density of the cluster, modulated by changing the organic ligands. This is not trivial in cyclohexane oxidation. Furthermore, the reaction mechanism is discussed on the basis of kinetics and spin trapping experiments, confirming that the electronic density of the catalyst has a clear influence on the distribution of the reaction products. In addition, in situ Raman spectroscopy was used to characterize the oxygen species formed on the cobalt cluster during the oxidation reaction. Altogether, it can be concluded that the catalyst with the highest oxidation potential promotes the formation of peroxide and superoxide species, which is the best way to oxidize inactivated CH bonds in alkanes. Finally, based on the results of the mechanistic studies, the contribution of these cobalt oxide clusters in each single reaction step of the whole process has been proposed., The authors thank Prof. A. Corma for his support and discussion on this work. S. G.-T. thanks MINECO for an FPU Ph.D. contract FPU16/02117. P. O.-B. is grateful for the financial support given by the Spanish Government (RTI2018-096399-A-I00). The authors would like to thank Ms Carmen Clemente and Ms Adelina Munoz for the ESI-MS and Raman measurements, respectively. The authors give additional thanks for the use of the analytical facilities at the X-Ray Unit of RIAIDT (Universidad de Santiago de Compostela).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sustainable Synthesis of Silicon Precursors Coupled with Hydrogen Delivery Based on Circular Economy via Molecular Cobalt-Based Catalysts

  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Rojas-Buzo, Sergio
  • Ortuño, Manuel A.
[EN] The development of a circular economy is a key target to reduce our dependence on fossil fuels and create more sustainable processes. Concerning hydrogen as an energy vector, the use of liquid organic hydrogen carriers is a promising strategy, but most of them present limitations for hydrogen release, such as harsh reaction conditions, poor recyclability, and low-value byproducts. Herein, we present a novel sustainable methodology to produce value-added silicon precursors and concomitant hydrogen via dehydrogenative coupling by using an air- and water-stable cobalt-based catalyst synthesized from dieap and commercially available starting materials. This methodology is applied to the one-pot synthesis of a wide range of alkoxy- substituted silanes using different hydrosilanes and terminal alkenes as reactants in alcohols as green solvents under mild reaction conditions (room temperature and 0.1 mol % cobalt loading). We also demonstrate that the selectivity toward hydrosilylation/hydroalkoxysilylation can be fully controlled by varying the alcohol/water ratio. This implies the development of a circular approach for hydrosilylation/hydroalkoxysilylation reactions, which is unprecedented in this research field up to date. Kinetic and in situ spectroscopic studies (electron paramagnetic resonance, nuclear magnetic resonance, and electrospray ionization mass spectrometry), together with density functional theory simulations, further provide a detailed mechanistic picture of the dehydrogenative coupling and subsequent hydrosilylation. Finally, we illustrate the application of our catalytic system in the synthesis of an industrially relevant polymer precursor coupled with the production of green hydrogen on demand., This work has received financial support from Spanish Government (RTI2018-096399-A-I00 and PID2020-119116RA-I00), Junta de Andalucia (P20_01027 and PYC 20 RE 060 UAL), Xunta Distinguished Researcher program (ED431H 2020/21), the Xunta de Galicia (Centro singular de investigacion de Galicia accreditation 2019-2022, ED431G 2019/03), and the European Union (European Regional Development Fund, ERDF). S.R.-B. acknowledges the Margarita Salas grant financed by Ministerio de Universidades, Spain, and funded by the European Union-Next Generation EU. M.A.O. acknowledges CESGA ("Centro de Super-computacion de Galicia") for providing generous computa-tional resources.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of Alkylarsonium Directing Agents for the Synthesis and Study of Zeolites

  • Saez-Ferre, Sara
  • Lopes, Christian W.
  • Simancas-Coloma, Jorge
  • Agostini, Giovanni
  • Mínguez Espallargas, Guillermo
  • Vidal Moya, José Alejandro
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Expanding the previously known family of -onium (ammonium, phosphonium, and sulfonium) organic structure-directing agents (OSDAs) for the synthesis of zeolite MFI, a new member, the arsonium cation, is used for the first time. The new group of tetraalkylarsonium cations has allowed the synthesis of the zeolite ZSM-5 with several different chemical compositions, opening a route for the synthesis of zeolites with a new series of OSDA. Moreover, the use of As replacing N in the OSDA allows the introduction of probe atoms that facilitate the study of these molecules by powder X-ray diffraction (PXRD), solid-state nuclear magnetic resonance (MAS NMR), and X-ray absorption spectroscopy (XAS). Finally, the influence of trivalent elements such as B, Al, or Ga isomorphically replacing Si atoms in the framework structure and its interaction with the As species has been studied. The suitability of the tetraalkylarsonium cation for carrying out the crystallization of zeolites is demonstrated along with the benefit of the presence of As atoms in the occluded OSDA, which allows its advanced characterization as well as the study of its evolution during OSDA removal by thermal treatments., Program Severo Ochoa SEV-2016-0683 and Maria de Maeztu MDM-2015-0538 are gratefully acknowledged. S.S-F. thanks MEC for his Severo Ochoa Grant SPV-2013-067884, P.O.-B. and G.M.E. thank MEC for his Ramon y Cajal contracts (RYC-2014-16620 and RYC-2013-14386). The authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, RTI2018-101784-B-I00 and CTQ2017-89528-P) and the Generalitat Valeciana (PROMETEO/2017/066). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. We gratefully acknowledge ESRF synchrotron for allocating beamtime (proposal CH-5193), the Italian CRG beam-line at ESRF (LISA-BM08), and Alessandro Puri for the help and technical support during our experiment. C.W.L. (Science without Frontiers-Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cobalt Metal-Organic Framework Based on Layered Double Nanosheets for Enhanced Electrocatalytic Water Oxidation in Neutral Media

  • Gutiérrez-Tarriño, Silvia
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Olloqui-Sariego, José Luis
  • Calvente, Juan José
  • Minguez Espallargas, Guillermo
Programs Severo Ochoa SEV-2016-0683 and María de Maeztu CEX2019-000919-M are gratefully acknowledged. S.G.-T. thanks the MINECO for her FPU Ph.D. contract FPU16/02117. P.O.-B. and G.M.E. thank MICCIN for their Ramón y Cajal contracts RYC-2014-16620 and RYC-2013-14386. The authors acknowledge the financial support by the Spanish Government (RTI2018-096399-A-I00, RTI2018-101784-BI00, CTQ2017-89528-P, and CTQ2014-52641-P) and Generalitat Valenciana (PROMETEU/2019/066). In addition, P.O.-B. thanks UPV for his grant PAID-06-18/SP20180172. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Prospects of Heterogeneous Hydroformylation with Supported Single Atom Catalysts

  • Amsler, Jonas
  • Sarma, Bidyut B.
  • Agostini, G.
  • Plessow, P.
  • Studt, F.
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] The potential of oxide-supported rhodium single atom catalysts (SACs) for heterogeneous hydroformylation was investigated both theoretically and experimentally. Using high-level domain-based local-pair natural orbital coupled cluster singles doubles with perturbative triples contribution (DLPNO-CCSD(T)) calculations, both stability and catalytic activity were investigated for Rh single atoms on different oxide surfaces. Atomically dispersed, supported Rh catalysts were synthesized on MgO and CeO2. While the CeO2-supported rhodium catalyst is found to be highly active, this is not the case for MgO, most likely due to increased confinement, as determined by extended X-ray absorption fine structure spectroscopy (EXAFS), that diminishes the reactivity of Rh complexes on MgO. This agrees well with our computational investigation, where we find that rhodium carbonyl hydride complexes on flat oxide surfaces such as CeO2(111) have catalytic activities comparable to those of molecular complexes. For a step edge on a MgO(301) surface, however, calculations show a significantly reduced catalytic activity. At the same time, calculations predict that stronger adsorption at the higher coordinated adsorption site leads to a more stable catalyst. Keeping the balance between stability and activity appears to be the main challenge for oxide supported Rh hydroformylation catalysts. In addition to the chemical bonding between rhodium complex and support, the confinement experienced by the active site plays an important role for the catalytic activity., X-ray absorption experiments were performed at the ALBA Synchrotron Light Source (Spain), experiment 2019023278. Beamline scientists L. Simonelli and C. Marini are gratefully acknowledged for their contribution to beam setup. E. Andrés, E. Martínez-Monje, I. López, and M. García-Farpón (ITQ) are acknowledged for their assistance with XAS data acquisition. J. Ternedien (MPI-KOFO) is acknowledged for the performance of XRD experiments. N. Pfänder (MPI-CEC) is acknowledged for his contribution to STEM characterization. The authors acknowledge support by the state of Baden-Württemberg through bwHPC (bwUnicluster and JUSTUS, RV bw17D01). The authors gratefully acknowledge support by the GRK 2450. Financial support from the Helmholtz Association is also gratefully acknowledged. The experimental work received funding from the Max Planck Society and the Spanish Ministry of Science, Innovation and Universities (projects SEV-2016-0683 and RTI2018-096399-A-I00). B.B.S. acknowledges the Alexander von Humboldt Foundation for a postdoctoral scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Understanding the potential-induced activation of a cobalt MOF electrocatalyst for the oxygen evolution reaction

  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
  • Portorreal-Bottier, Arismendy
  • Trasobares, Susana
  • Calvente, Juan José
  • Calvino, Juan José
  • Olloqui-Sariego, José Luis
[EN] Metal-organic frameworks (MOFs) are attractive porous materials for electrocatalytic applications associated with carbon-free energy storage and conversion. This type of material usually requires a post-treatment to be used as electrocatalyst. The present work comprehensively investigates the electrochemical activation of a cobalt-MOF@Nafion composite that produces outstanding electrocatalytic performance for the water oxidation reaction at neutral pH. A detailed electrochemical characterization reveals that the electroactivation of the composite requires the participation of the oxygen evolution reaction (OER) and leads to a significant increase in the electroactive population of cobalt centers. It is shown that an increase of the applied activation potential in the OER region results in a faster electroactivation of the Co-MOF without affecting the intrinsic electrocatalytic properties of the active cobalt centers, as evidenced by the unique linear correlation between the electrocatalytic OER current and the population of electroactive cobalt. In addition, at structural level, it is shown that the electrochemical activation causes the partial disruption of the Nafion adlayer, as well as morphological changes of the Co-MOF particles from a compact, rounded morphology, before electrochemical activation, to a more open and expanded structure, after electroactivation; with the concomitant increase of the number of surface--exposed cobalt centers. Interestingly, these cobalt centers retain their coordinative chemistry and their laminar distribution in the nanosheets at the nanoscale, which is consistent with the preservation of their intrinsic electrocatalytic activity after potential-induced activation. In this scenario, these results suggest that only the electroactivated cobalt centers with good accessibility to the electrolyte are electrochemically active. This work provides a better understanding of the processes and structural changes underlying the electrochemical acti-vation at neutral pH of a Co-MOF for boosting the electrocatalytic water oxidation reaction., Authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, PID2020-113006-RB-I00, PID2021-126799NB-I00, TED2021-130191B-C41, TED2021-130191B-C42 and TED2021-130191B-C44 funded by MCIN/AEI/10.13039/501100011033) and Junta de Andalucia (P20-01027 and PYC 20 RE 060 UAL). The authors acknowledge funding from the European Union's Horizon 2020 research and innovation program under Grant 823717-ESTEEM3. Electron microscopy studies were performed at the DME-UCA node of the Spanish Unique Infrastructure (ICTS) on Electron Microscopy of Materials ELECMI. The authors thank Dr. A. Raya-Baron for his support on this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

AgY zeolite as catalyst for the selective catalytic oxidation of NH3

  • Martinez-Ortigosa, Joaquin
  • Lopes, Christian W.
  • Agostini, Giovanni
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] Ag-exchanged Y zeolites (Si/Al = 2.5; Ag/Al = 0.30-0.95) have been tested in the NH3-SCO reaction, the most promising method for the elimination of ammonia emissions, and deeply characterized before and after reaction by using a variety of techniques (XRD, TEM, UV-Vis, Ag-109 NMR, XAS spectroscopies). The most active centres for the NH3-SCO reaction are Ag-0 nanoparticles (NPs) formed under reduction conditions and both activity and selectivity to N-2 increase with the silver loading. The Ag-0 NPs are dramatically modified under reaction conditions, being most of them dispersed resulting in small clusters and even atomically Ag+ cations, the latter accounting for around half silver atoms. The presence of water into the reaction feed promotes the dispersion and oxidation of silver nanoparticles, but the catalyst performance is only slightly affected. The results are fully consistent with the previously proposed i-SCR mechanism for NH3-SCO reaction on silver catalysts., Financial support by the Ministerio de Ciencia e Innovacion (MICINN) of Spain through the Severo Ochoa (SEV-2016-0683) , RTI2018-101784-B-I00, RTI2018-09639-A-I00 and InnovaXN-26-2019 projects is gratefully acknowledged. The authors also thank the Microscopy Service of the Universitat Politecnica de Valencia for its assistance in microscopy characterization (TEM and FESEM equipment preparation) . C. W. Lopes (Science without Borders Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship and J. Martinez-Ortigosa (SEV-2012-0267-02) is grateful to Severo Ochoa Program for a predoctoral fellowship. The authors also want to thank the ALBA synchrotron and CL AE SS beamline staff for providing beamtime (proposal 2017092477) and for setting the beamline up to perform these studies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rh2P Nanoparticles Stabilized by Carbon Patches for Hydroformylation of Olefins

  • Galdeano-Ruano, Carmen Piedad
  • Wittee Lopes, Christian
  • Motta Meira, Debora
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Rh2P nanoparticles (NPs) have been identified as suitable mimics of [Rh-I(Ph3P)(3)](+), the benchmark of homogeneous catalysts in liquid-phase hydroformylation. For this reason, a fitted synthetic strategy is required to develop catalysts based exclusively on Rh2P NPs. To attain this, two synthetic pathways have been devised. In the first one, two separate sources of Rh and P were used. In the second one, the Wilkinson complex was employed as a unique source of Rh and P to probe the positive influence of the well-defined molecular organization on the preparation of dispersed and controlled Rh2P nanoparticles, stabilized by carbon patches formed during the pyrolysis treatment from PPh3. In addition, metallic Rh nanoparticles were also synthesized to be used as reference. All catalysts have been compared by means of: transmission electron microscopy, Xray diffraction, and X-ray adsorption spectroscopy. The application of XAS to the study of Rh2P NPs is unusual and has been essential in the discussion of the results. Starting with a well-defined metal precursor leads to the exclusive formation of Rh2P NPs with excellent catalytic activity for the liquid-phase hydroformylation. The role of P is to modulate the particle size and the electronic configuration of Rh species, resulting in the improvement of the catalytic performance and the obtention of turnover frequencies of 5236 h(-1) at 60 degrees C and 17,788 h(-1) at 100 degrees C., Program Severo Ochoa SEV-2016-0683 is gratefully acknowledged. C.G.-R. thanks MINECO for her FPU Ph.D. contract FPU17/04172. The authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00). The authors thank J.G.M. for his technical support. We also thank the Electron Microscopy Service of the UPV for TEM facilities. C.W.L. thanks PRH 50.1 - ANP/FINEP Human Resources Program for the Visiting Researcher Fellowship. This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by the Argonne National Laboratory and was supported by the U.S. DOE under contract no. DE-AC02-06CH11357 and the Canadian Light Source and its funding partners.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enzyme-like activity of cobalt-MOF nanosheets for hydrogen peroxide electrochemical sensing

  • Portorreal-Bottier, Arismendy
  • Calvente, Juan José
  • Andreu, Rafael
  • Roldán, Emilio
  • Olloqui-Sariego, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Metal-organic frameworks (MOFs) are receiving increased attention as new functional nanomaterials for the development of electrochemical sensors. Herein, we develop an electrochemical platform for non-enzymatic hydrogen peroxide detection built with a composite of two-dimensional cobal t MOF nanosheets and Nafion (2D-Co-MOF@Nafion). The feasibility of the 2D-Co-MOF@Nafion composite as active material for high perfor-mance hydrogen peroxide sensor was investigated by usin g cyclic voltammetr y and chronoamperometry. Its voltammetric response reveals an efficient charge transport through the MOF composite, and rapid electron exchange between MOF and electrode. Notably, these MOF nanosheets exhibit enzyme-like activity for the non-common catalytic oxidation of hydrogen peroxide, leadin g to an electrochemical sensor with rapid quantitative detection, outstanding sensitivity, selectivity, stability, and durability at the desirable neutral pH. In particular, for a cobal t metal loading of 1.2 nanomol, the sensor yields amperometric H2O2 detection with characteristic electrocatalytic parameters ofima x = 5.7 mA cm(-2)andKM= 13 mM. Moreover, linear ranges of up to either 1 mM or 10 mM are achieved, with sensitivities as high as 570 +/-; 5 A cm(-2) mM(-1) or 395 +/- 10 A cm(-2) mM(-1) for the low and high concentration ranges, respectively. The particular coordination chemistr y of the MOF consisting of a regular arrangement of multiple Co(II) redox metal sites connected by appropriate organic ligands can provide inherent enzyme-mimicking properties, thereby explaining the higher oxidase-like activit y of the present MOF. This work raises the new idea of using two-dimensional cobalt-based MOFs as active nanozymes, offering exciting opportunities in the design of non-enzymatic electrochemical sensing devices., Acknowledgments Authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00) and Junta de Andalucia (P20_01027 and PYC 20 RE 060 UAL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanostructured Hybrids Based on Tantalum Bromide Octahedral Clusters and Graphene Oxide for Photocatalytic Hydrogen Evolution

  • Hernandez-Niño, Jhon Sebastian|||0000-0002-6550-7107
  • Puche Panadero, Marta|||0000-0002-9390-5532
  • Feliz Rodriguez, Marta|||0000-0002-4429-0551
  • Shamsurin, Maxim
  • Sokolov, Maxim N.
[EN] The generation of hydrogen (H2) using sunlight has become an essential energy alternative for decarbonization. The need for functional nanohybrid materials based on photo- and electroactive materials and accessible raw materials is high in the field of solar fuels. To reach this goal, single-step synthesis of {Ta6Bri12}@GO (GO = graphene oxide) nanohybrids was developed by immobilization of [{Ta6Bri12}Bra2(H2O)a4]·4H2O (i = inner and a = apical positions of the Ta6 octahedron) on GO nanosheets by taking the advantage of the easy ligand exchange of the apical cluster ligands with the oxygen functionalities of GO. The nanohybrids were characterized by spectroscopic, analytical, and morphological techniques. The hybrid formation enhances the yield of photocatalytic H2 from water with respect to their precursors and this is without the presence of precious metals. This enhancement is attributed to the optimal cluster loading onto the GO support and the crucial role of GO in the electron transfer from Ta6 clusters into GO sheets, thus suppressing the charge recombination. In view of the simplicity and versatility of the designed photocatalytic system, octahedral tantalum clusters are promising candidates to develop new and environmentally friendly photocatalysts for H2 evolution., This research was funded by Ministerio de Ciencia e Innovación (MICINN), grant number PGC2018-099744. Parts of this research dealing with metal cluster synthesis and characterization received funding from project RTI2018-096399-A-I00 funded by MCIN/AEI/10.13039/501100011033/ and ¿ERDF A way of making Europe¿. J.S.H. gratefully acknowledges the Consejo Superior de Investigaciones Científicas (CSIC) and Generalitat Valenciana (GVA), Programa Santiago Grisolía, grant number GRISOLIA/2021/054. M.S. received financial support by the Russian Foundation for Basic Research (grant number 20-33-90010) and the Ministry of Science and Higher Education of the Russian Federation (grant number 121031700313¿8). The APC was funded by this journal.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ultra-low metal loading rhodium phosphide electrode for efficient alkaline hydrogen evolution reaction

  • Galdeano-Ruano, Carmen Piedad
  • Márquez, Inmaculada
  • Lopes, Christian Wittee
  • Calvente, Juan Jose
  • Agostini, Giovanni
  • Roldan, Alberto
  • Olloqui-Sariego, Jose Luis
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The practical production of hydrogen from water electrolyzers demands efficient electrocatalysts with maximized and optimized active sites that promote the Hydrogen Evolution Reaction (HER) at wide pH ranges. Herein, we successfully synthesized a rhodium-based nanomaterial with extremely low metal loading (2 mu g/cm(-2)) as electrocatalyst for the HER. In particular, the material consists of carbon-supported rhodium phosphide (Rh2P) as active sites, which are partially covered with carbon patches. The so-developed nanomaterial exhibits high crystallinity, resistance to sintering, and outstanding electrocatalytic activity and operational stability in an extended pH interval. Notably, Rh2P displays specific-mass activities, ca. 2.5- and 5-fold higher than those of the benchmark 20 wt% Pt/C at an overpotential of 50 mV in acidic and alkaline media, respectively. Comparison of the electrocatalytic performance of the current Rh2P electrocatalyst with those of phosphorus-free rhodium NPs and an alternative rhodium phosphide nanomaterial, reveals that the inclusion of phosphorus atoms, the purity and crystallinity of the Rh2P phase are critical to boost the electrocatalytic HER. This is corroborated by theoretical simulations using DFT, which also prove that the presence of C-patches on Rh2P favors the H2O dissociation during HER electrocatalytic cycle and prevents phosphorous leaching. Overall, this work provides new insights for the rational design and controlled synthesis of small NPs for using as efficient electrocatalysts in hydrogen-based renewable energy devices. (c) 2023 The Authors. Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC. This is an open access article under the CC BY-NC-ND license (http:// creativecommons.org/licenses/by-nc-nd/4.0/)., CGR thanks toMINECO for her FPU Ph.D. contract FPU17/04172. CWL thanks the PRH 50.1 e ANP/FINEP Human Resources Program for the Visiting Researcher Fellowship. These experiments were performed at CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff. S. Guti~errez-Tarri~no, J. S. Martinez, A. Garci ' a-Zaragoza and W. Henao are acknowledged for their assistance with XAS data acquisition. Authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, PID2021-126799NB-I00, TED2021130191B-C41, supported by MCIN/AEI/10.13039/501100011033 and by Uni~on Europea NextGenerationEU/PRTR, and TED2021130191B-C42), Junta de Andaluci ' a (P20_01027 and PYC 20 RE 060 UAL) and Generalitat Valenciana (MFA/2022/047, Advanced Materials programme, which was supported by MCIN with funding fromEuropean Union NextGeneration EU PRTR-C17.I1 and Generalitat Valenciana). We are thankful for the Electron Microscopy Service of the UPV for TEM facilities. We also acknowledge Supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rhodium Single-Atom Catalyst Design through Oxide Support Modulation for Selective Gas-Phase Ethylene Hydroformylation

  • Garcia-Farpon, Marcos
  • Plessow, Philipp N.
  • Andres-Marcos, Eva
  • Arenal, Raúl
  • Marini, Carlo
  • Agostini, Giovanni
  • Studt, Felix
  • Henao-Sierra, Wilson Albeiro
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] A frontier challenge in single-atom (SA) catalysis is the design of fully inorganic sites capable of emulating the high reaction selectivity traditionally exclusive of organometallic counterparts in homogeneous catalysis. Modulating the direct coordination environment in SA sites, via the exploitation of the oxide support's surface chemistry, stands as a powerful albeit underexplored strategy. We report that isolated Rh atoms stabilized on oxygen-defective SnO2 uniquely unite excellent TOF with essentially full selectivity in the gas-phase hydroformylation of ethylene, inhibiting the thermodynamically favored olefin hydrogenation. Density Functional Theory calculations and surface characterization suggest that substantial depletion of the catalyst surface in lattice oxygen, energetically facile on SnO2, is key to unlock a high coordination pliability at the mononuclear Rh centers, leading to an exceptional performance which is on par with that of molecular catalysts in liquid media., This work received funding from the European Research Council (ERC-2019-CoG 864195) and project RTI2018-096399-A-I00 funded by MCIN/AEI/10.13039/501100011033/ and "ERDF A way of making Europe". M.G.F, E.A. and W.H. acknowledge support by their predoctoral grants FPU17/04701, FPU17/04751 and PRE2019-087571, respectively. R.A. acknowledges support from the Spanish MICIN (PID2019-104739GB-100/AEI/10.13039/501100011033), Government of Aragon (DGA E13-20R) and EU H2020 "ESTEEM3" (823717). P.N.P and F.S. acknowledge support by the state of Baden-Wuerttemberg through bwHPC (bwunicluster and JUSTUS, RV bw17D011) and the Helmholtz Association. XAS experiments were performed at CLAESS and NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff, R. Pelaez, N. Atashi and M.E. Martinez. M. Boronat is thanked for support with slab model relaxations. V. Recio, J.M. Salas, A. Munoz and M.D. Soriano are acknowledged for experimental contributions to catalyst synthesis, FTIR, Raman and XPS measurements, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MOF-Mediated Synthesis of Supported Fe-Doped Pd Nanoparticles under Mild Conditions for Magnetically Recoverable Catalysis

  • Darawsheh, Mohanad D.
  • Mazarío-Santa-Pau, Jaime
  • Lopes, Christian W.
  • Gimenez-Marques, Monica
  • Meira, Debora M.
  • Martínez, Jordan Santiago
  • Minguez Espallargas, Guillermo
  • Domine, Marcelo Eduardo
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Metal-organic framework (MOF)-driven synthesis is considered as a promising alternative for the development of new catalytic materials with well-designed active sites. This synthetic approach is used here to gradually transform a new bimetallic MOF, with Pd and Fe as the metal components, by the in situ generation of aniline under mild conditions. This methodology results in a compositionally homogeneous nanocomposite formed by Fe-doped Pd nanoparticles that, in turn, are supported on iron oxide-doped carbon. The nanocomposite has been fully characterized by several techniques such as IR and Raman spectroscopy, TEM, XPS, and XAS. The performance of this nanocomposite as an heterogeneous catalyst for hydrogenation of nitroarenes and nitrobenzene coupling with benzaldehyde has been evaluated, proving it to be an efficient and reusable catalyst., This work has been supported by the European Union (ERC2016-CoG 724681-S-CAGE), by the Spanish MICINN (Structures of Excellence Severo Ochoa SEV-2016-0683 and Maria de Maeztu CEX2019-000919-M; projects CTQ2017-89528-P, CTQ2015-67592, PGC2018-097277-B-100, and RTI2018-096399A-I00 co-financed by FEDER). We also thank the Generalitat Valenciana (PROMETEO/2018/006 and PROMETEU/2019/066). G.M.E. and P.O.-B. thank MICINN for their "Ramon y Cajal" fellowships. M.G.-M thanks support of a fellowship from "la Caixa" Foundation (LCF/BQ/PI19/11690022) and Generalitat Valenciana (SEJI/2020/036). J.M. thanks MICINN for his PhD fellowship (CTQ2015-67592). The authors also thank the Electron Microscopy Service of Universitat Politicnica de Val~ncia for their support, M. P. Romero for her assistance with TEM measurements and Prof. E. Rodr~guez-Castellin for discussions on the XPS spectra interpretation. This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory and was supported by the U.S. DOE under contract no. DE-AC02-06CH11357, and the Canadian Light Source and its funding partners.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal-Specific Reactivity in Single-Atom Catalysts: CO Oxidation on 4d and 5d Transition Metals Atomically Dispersed on MgO

  • Sarma, Bidyut B.
  • Plessow, Philipp N.
  • Agostini, Giovanni
  • Pfänder, Norbert
  • Kang, Liqun
  • Wang, Feng R.
  • Studt, Felix
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Understanding and tuning the catalytic properties of metals atomically dispersed on oxides are major stepping-stones toward a rational development of single-atom catalysts (SACs). Beyond individual showcase studies, the design and synthesis of structurally regular series of SACs opens the door to systematic experimental investigations of performance as a function of metal identity. Herein, a series of single-atom catalysts based on various 4d (Ru, Rh, Pd) and Sd (Ir, Pt) transition metals has been synthesized on a common MgO carrier. Complementary experimental (X-ray absorption spectroscopy) and theoretical (Density Functional Theory) studies reveal that, regardless of the metal identity, metal cations occupy preferably octahedral coordination MgO lattice positions under step-edges, hence highly confined by the oxide support. Upon exposure to O-2-lean CO oxidation conditions, FTIR spectroscopy indicates the partial deconfinement of the monatomic metal centers driven by CO at precatalysis temperatures, followed by the development of surface carbonate species under steady-state conditions. These findings are supported by DFT calculations, which show the driving force and final structure for the surface metal protrusion to be metal-dependent, but point to an equivalent octahedral-coordinated M4+ carbonate species as the resting state in all cases. Experimentally, apparent reaction activation energies in the range of 96 +/- 19 kJ/mol are determined, with Pt leading to the lowest energy barrier. The results indicate that, for monatomic sites in SACs, differences in CO oxidation reactivity enforceable via metal selection are of lower magnitude than those evidenced previously through the mechanistic involvement of adjacent redox centers on the oxide carrier, suggesting that tuning of the oxide surface chemistry is as relevant as the selection of the supported metal., XAS experiments were performed at B18 beamline, Diamond Light Source, United Kingdom (proposals Nr. SP17377 and SP19072) and BL22 beamline, ALBA Light Source, Spain (experiment 2019023278). Beamline scientists D. Gianolio (Diamond) and L. Simonelli and C. Marini (ALBA) are acknowledged for their assistance with the beamline setup during XAS experiments. The authors are grateful to M. Garcia, E. Andres, M. E. Martinez, and I. Lopez (ITQ) for assistance during the XAS experiments. J. Ternieden (MPIKOFO) is acknowledged for the performance of XRD experiments. J.M. Salas (ITQ) is acknowledged for his experimental contribution to the CO-FTIR studies, and M.D. Soriano and A. Munoz for the recording of XP spectra. P.N.P. and F.S. acknowledge support by the state of BademWurttemberg through bwHPC (bwUnicluster and JUSTUS, RV bw17D01) and support from the Helmholtz Association is also gratefully acknowledged. This research received funding from the Alexander von Humboldt Foundation (postdoctoral grant to B.B.S.), the Max Planck Society and the Fonds der Chemischen Industry (FCI, Germany). The authors are grateful to Prof. Ferdi Schuth for the provision of lab facilities and support throughout the project. Funding from the Spanish Ministry of Science, Innovation and Universities (projects SEV 2016-0683 and RTI2018-096399-A-100) is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano-Ruano, Carmen Piedad
  • Lopes, Christian W.
  • Mazarío, Jaime
  • Chinchilla, Lidia E.
  • Agostini, Giovanni
  • Calvino, JJ
  • Holgado, Juan P.
  • Rodriguez-Castellon, Enrique
  • Roldan, Alberto
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid -phase hydroformylation poses a unique challenge due to carbon monoxide -induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatomincorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N -doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoNx@NC, presents excellent catalytic results for a Co -based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N -doped carbon patches., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, TED2021-130756B-C31 and TED2021-130191B-C44, PID2020-119946RB-I00, US-1263455 funded by MCIN/AEI/10.13039/501100011033 and European Union Next- GenerationEU/PRTR) . This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. We also acknowledge the supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One Pot Cooperation of Single Atom Rh and Ru Solid Catalysts for a Selective Tandem Olefin Isomerization - Hydrosilylation Process

  • Sarma, Bidyut B.
  • Kim, Jonglack
  • Amsler, Jonas
  • Agostini, Giovanni
  • Weidenthaler, Claudia
  • Pfaender, Norbert
  • Arenal, Raul
  • Plessow, Philipp
  • Studt, Felix
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Realizing the full potential of oxide-supported single-atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one-pot combination of Ru-1/CeO2 and Rh-1/CeO2 SACs enables a highly selective olefin isomerization-hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double-bond migration and anti-Markovnikov alpha-olefin hydrosilylation, respectively. First-principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single-pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio-selectivity (>95 %) even from industrially-relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide-supported single-atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes., X-ray absorption experiments were performed at the ALBA Synchrotron Light Source (Spain), experiments 2018082961 and 2019023278. L. Simonelli and C. Marini (CLAESSALBA beamline) are thanked for beamline setup. E. Andres, M. E. Martinez, M. Garcia, and I. Lopez (ITQ), are acknowledged for their assistance with XAS experiments. J. Buscher, J. Ternedien, B. Spliethoff, and C. Wirtz (MPI-KOFO) are acknowledged for the performance of XPS, XRD, BF-TEM and 2H NMR experiments, respectively. I. C. de Freitas (MPIKOFO) is thanked for assistance with Raman spectroscopy. J. M. Salas (ITQ) is gratefully acknowledged for his contribution to CO-FTIR experiments. J. J. Barnes and Shell (Amsterdam) are acknowledged for kindly providing an industrial olefin mixture as feed. Authors are thankful to F. Schuth for the provision of lab space and continued support. Part of the HRSTEM and EDX-STEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) and from the European Union H2020 programs "ESTEEM3" (823717). The authors acknowledge support by the state of Baden-Wurttemberg through bwHPC (bwUnicluster and JUSTUS, RV bw17D01), by the GRK 2450 and by the Helmholtz Association. This research received funding from the Max Planck Society, and the Fonds der Chemische Industrie of Germany. Funding from the Spanish Ministry of Science, Innovation and Universities (Severo Ochoa program SEV-2016-0683 and grant RTI2018096399-A-I00) is also acknowledged. B.B.S. acknowledges the Alexander von Humboldt Foundation for a postdoctoral scholarship. Open Access funding is provided by the Max Planck Society.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano Ruano, Carmen
  • Gutiérrez Tarriño, Silvia
  • Lopes, Christian W.
  • Mazarío, Jaime
  • Chinchilla Reyes, Lidia Esther
  • Agostini, Giovanni
  • Calvino Gámez, José Juan
The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid-phase hydroformylation poses a unique challenge due to carbon monoxide-induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatomincorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N-doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoNx@NC, presents excellent catalytic results for a Co-based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N-doped carbon patches.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Understanding the potential-induced activation of a cobalt MOF electrocatalyst for the oxygen evolution reaction

  • Gutiérrez Tarriño, Silvia
  • Portorreal Bottier, Arismendy
  • Calvente, Juan José
  • Olloqui Sariego, José Luis
  • Oña Burgos, Pascual
  • Trasobares Llorente, Susana
  • Calvino Gámez, José Juan
Metal–organic frameworks (MOFs) are attractive porous materials for electrocatalytic applications associated with carbon-free energy storage and conversion. This type of material usually requires a post-treatment to be used as electrocatalyst. The present work comprehensively investigates the electrochemical activation of a cobalt-MOF@Nafion composite that produces outstanding electrocatalytic performance for the water oxidation reaction at neutral pH. A detailed electrochemical characterization reveals that the electroactivation of the composite requires the participation of the oxygen evolution reaction (OER) and leads to a significant increase in the electroactive population of cobalt centers. It is shown that an increase of the applied activation potential in the OER region results in a faster electroactivation of the Co-MOF without affecting the intrinsic electrocatalytic properties of the active cobalt centers, as evidenced by the unique linear correlation between the electrocatalytic OER current and the population of electroactive cobalt. In addition, at structural level, it is shown that the electrochemical activation causes the partial disruption of the Nafion adlayer, as well as morphological changes of the Co–MOF particles from a compact, rounded morphology, before electrochemical activation, to a more open and expanded structure, after electroactivation; with the concomitant increase of the number of surface–exposed cobalt centers. Interestingly, these cobalt centers retain their coordinative chemistry and their laminar distribution in the nanosheets at the nanoscale, which is consistent with the preservation of their intrinsic electrocatalytic activity after potential–induced activation. In this scenario, these results suggest that only the electroactivated cobalt centers with good accessibility to the electrolyte are electrochemically active. This work provides a better understanding of the processes and structural changes underlying the electrochemical activation at neutral pH of a Co–MOF for boosting the electrocatalytic water oxidation reaction, 9 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Efficient Alkyne Semihydrogenation Catalysis Enabled by Synergistic Chemical and Thermal Modifications of a PdIn MOF

  • Martínez, J. S.
  • Mazarío, J.
  • Lopes, C. W.
  • Trasobares Llorente, Susana
  • Calvino Gámez, José Juan
  • Agostini, Giovanni
  • Oña Burgos, Pascual
Recently, there has been a growing interest in using MOF templating to synthesize heterogeneous catalysts based on metal nanoparticles on carbonaceous supports. Unlike the common approach of direct pyrolysis of PdIn-MOFs at high temperatures, this work proposes a reductive chemical treatment under mild conditions before pyrolysis (resulting in PdIn-QT). The resulting material (PdIn-QT) underwent comprehensive characterization via state-of-the-art aberration-corrected electron microscopy, N2 physisorption, X-ray absorption spectroscopy, Raman, X-ray photoelectron spectroscopy, and X-ray diffraction. These analyses have proven the existence of PdIn bimetallic nanoparticles supported on N-doped carbon. In situ DRIFT spectroscopy reveals the advantageous role of indium (In) in regulating Pd activity in alkyne semihydrogenation. Notably, incorporating a soft nucleation step before pyrolysis enhances surface area, porosity, and nitrogen content compared to direct MOF pyrolysis. The optimized material exhibits outstanding catalytic performance with 96% phenylacetylene conversion and 96% selectivity to phenylethylene in the fifth cycle under mild conditions (5 mmol phenylacetylene, 7 mg cat, 5 mL EtOH, R.T., 1 H2 bar).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Use of Alkylarsonium Directing Agents for the Synthesis and Study of Zeolites

  • Sáez-Ferre, S.
  • Lopes, C.W.
  • Vidal-Moya, Alejandro
  • Blasco, Teresa
  • Agostini, G.
  • Mínguez Espallargas, Guillermo
  • Jordá Moret, José Luis
  • Rey García, Fernando
  • Oña-Burgos, Pascual
  • Simancas, Jorge
Expanding the previously known family of -onium (ammonium, phosphonium, and sulfonium) organic structure-directing agents (OSDAs) for the synthesis of zeolite MFI, a new member, the arsonium cation, is used for the first time. The new group of tetraalkylarsonium cations has allowed the synthesis of the zeolite ZSM-5 with several different chemical compositions, opening a route for the synthesis of zeolites with a new series of OSDA. Moreover, the use of As replacing N in the OSDA allows the introduction of probe atoms that facilitate the study of these molecules by powder X-ray diffraction (PXRD), solid-state nuclear magnetic resonance (MAS NMR), and X-ray absorption spectroscopy (XAS). Finally, the influence of trivalent elements such as B, Al, or Ga isomorphically replacing Si atoms in the framework structure and its interaction with the As species has been studied. The suitability of the tetraalkylarsonium cation for carrying out the crystallization of zeolites is demonstrated along with the benefit of the presence of As atoms in the occluded OSDA, which allows its advanced characterization as well as the study of its evolution during OSDA removal by thermal treatments., Program Severo Ochoa SEV-2016-0683 and Maria de Maeztu MDM-2015-0538 are gratefully acknowledged. S.S-F. thanks MEC for his Severo Ochoa Grant SPV-2013-067884, P.O.-B. and G.M.E. thank MEC for his Ramjn y Cajal contracts (RYC-2014- 16620 and RYC-2013-14386). The authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, RTI2018-101784-B-I00 and CTQ2017-89528-P) and the Generalitat Valeciana (PROMETEO/2017/066). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. We gratefully acknowledge ESRF synchrotron for allocating beamtime (proposal CH-5193), the Italian CRG beam-line at ESRF (LISA-BM08), and Alessandro Puri for the help and technical support during our experiment. C.W.L. (Science without Frontiers—Process no. 13191/13-6) thanks CAPES for a predoctoral fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalt Metal-Organic Framework Based on Two Dinuclear Secondary Building Units for Electrocatalytic Oxygen Evolution

  • Gutiérrez-Tarriño, S.
  • Olloqui-Sariego, José Luis
  • Calvente, Juan José
  • Palomino, Miguel
  • Mínguez Espallargas, Guillermo
  • Jordá Moret, José Luis
  • Rey García, Fernando
  • Oña-Burgos, Pascual
The synthesis of a new microporous metal-organic framework (MOF) based on two secondary building units, with dinuclear cobalt centers, has been developed. The employment of a well-defined cobalt cluster results in an unusual topology of the Co-MOF, where one of the cobalt centers has three open coordination positions, which has no precedent in MOF materials based on cobalt. Adsorption isotherms have revealed that Co-MOF is in the range of best CO adsorbents among the carbon materials, with very high CO/CH selectivity. On the other hand, dispersion of Co-MOF in an alcoholic solution of Nafion gives rise to a composite (Co-MOF@Nafion) with great resistance to hydrolysis in aqueous media and good adherence to graphite electrodes. In fact, it exhibits high electrocatalytic activity and robustness for the oxygen evolution reaction (OER), with a turnover frequency number value superior to those reported for similar electrocatalysts. Overall, this work has provided the basis for the rational design of new cobalt OER catalysts and related materials employing well-defined metal clusters as directing agents of the MOF structure., The authors thank Prof. Avelino Corma for discussion and support, and J. Mazarío for XPS analysis and discussion. Program Severo Ochoa SEV-2016-0683 is gratefully acknowledged. S.G.-T. thanks MINECO for a FPU Ph.D. fellowship FPU16/02117. P.O.-B. thanks MEC for his Ramón y Cajal contract RYC-2014-16620. The authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, RTI2018-101784-B-I00, and CTQ2014-52641-P). In addition, P.O.-B. thanks UPV for his grant PAID-06-18/SP20180172. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One‐pot cooperation of single‐aom Rh and Ru solid catalysts for a selective tandem olefin isomerization‐hydrosilylation process

  • Sarma, Bidyut B.
  • Kim, Jonglack
  • Amsler, Jonas
  • Agostini, Giovanni
  • Weidenthaler, Claudia
  • Pfänder, Norbert
  • Arenal, Raúl
  • Concepción, Patricia
  • Plessow, Philipp
  • Studt, Felix
  • Prieto, Gonzalo
Realizing the full potential of oxide‐supported single‐atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one‐pot combination of Ru1/CeO2 and Rh1/CeO2 SACs enables a highly selective olefin isomerization‐hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double‐bond migration and anti‐Markovnikov α‐olefin hydrosilylation, respectively. First‐principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single‐pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio‐selectivity (>95 %) even from industrially‐relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide‐supported single‐atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes., R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016‐79776‐P (AEI/FEDER, UE) and from the European Union H2020 programs “ESTEEM3” (823717). The authors acknowledge support by the state of Baden‐Württemberg through bwHPC (bwUnicluster and JUSTUS, RV bw17D01), by the GRK 2450 and by the Helmholtz Association. This research received funding from the Max Planck Society, and the Fonds der Chemische Industrie of Germany. Funding from the Spanish Ministry of Science, Innovation and Universities (Severo Ochoa program SEV‐2016‐0683 and grant RTI2018‐096399‐A‐I00) is also acknowledged. B.B.S. acknowledges the Alexander von Humboldt Foundation for a postdoctoral scholarship. Open Access funding is provided by the Max Planck Society., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Prospects of Heterogeneous Hydroformylation with Supported Single Atom Catalysts

  • Amsler, Jonas
  • Sarma, Bidyut B.
  • Agostini, Giovanni
  • Prieto, Gonzalo
  • Plessow, Philipp
  • Studt, Felix
The potential of oxide-supported rhodium single atom catalysts (SACs) for heterogeneous hydroformylation was investigated both theoretically and experimentally. Using high-level domain-based local-pair natural orbital coupled cluster singles doubles with perturbative triples contribution (DLPNO-CCSD(T)) calculations, both stability and catalytic activity were investigated for Rh single atoms on different oxide surfaces. Atomically dispersed, supported Rh catalysts were synthesized on MgO and CeO. While the CeO-supported rhodium catalyst is found to be highly active, this is not the case for MgO, most likely due to increased confinement, as determined by extended X-ray absorption fine structure spectroscopy (EXAFS), that diminishes the reactivity of Rh complexes on MgO. This agrees well with our computational investigation, where we find that rhodium carbonyl hydride complexes on flat oxide surfaces such as CeO(111) have catalytic activities comparable to those of molecular complexes. For a step edge on a MgO(301) surface, however, calculations show a significantly reduced catalytic activity. At the same time, calculations predict that stronger adsorption at the higher coordinated adsorption site leads to a more stable catalyst. Keeping the balance between stability and activity appears to be the main challenge for oxide supported Rh hydroformylation catalysts. In addition to the chemical bonding between rhodium complex and support, the confinement experienced by the active site plays an important role for the catalytic activity., X-ray absorption experiments were performed at the ALBA Synchrotron Light Source (Spain), experiment 2019023278. Beamline scientists L. Simonelli and C. Marini are gratefully acknowledged for their contribution to beam setup. E. Andrés, E. Martı́nez-Monje, I. López, and M. Garcı́a-Farpón (ITQ) are acknowledged for their assistance with XAS data acquisition. J. Ternedien (MPI-KOFO) is acknowledged for the performance of XRD experiments. N. Pfänder (MPI-CEC) is acknowledged for his contribution to STEM characterization. The authors acknowledge support by the state of Baden-Württemberg through bwHPC (bwUnicluster and JUSTUS, RV bw17D01). The authors gratefully acknowledge support by the GRK 2450. Financial support from the Helmholtz Association is also gratefully acknowledged. The experimental work received funding from the Max Planck Society and the Spanish Ministry of Science, Innovation and Universities (projects SEV-2016-0683 and RTI2018-096399-A-I00). B.B.S. acknowledges the Alexander von Humboldt Foundation for a postdoctoral scholarship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-Specific Reactivity in Single-Atom Catalysts: CO Oxidation on 4d and 5d Transition Metals Atomically Dispersed on MgO

  • Sarma, Bidyut B.
  • Plessow, Philipp
  • Agostini, Giovanni
  • Concepción, Patricia
  • Pfänder, Norbert
  • Kang, Liqun
  • Wang, Feng R.
  • Studt, Felix
  • Prieto, Gonzalo
Understanding and tuning the catalytic properties of metals atomically dispersed on oxides are major stepping-stones toward a rational development of single-atom catalysts (SACs). Beyond individual showcase studies, the design and synthesis of structurally regular series of SACs opens the door to systematic experimental investigations of performance as a function of metal identity. Herein, a series of single-atom catalysts based on various 4d (Ru, Rh, Pd) and 5d (Ir, Pt) transition metals has been synthesized on a common MgO carrier. Complementary experimental (X-ray absorption spectroscopy) and theoretical (Density Functional Theory) studies reveal that, regardless of the metal identity, metal cations occupy preferably octahedral coordination MgO lattice positions under step-edges, hence highly confined by the oxide support. Upon exposure to O2-lean CO oxidation conditions, FTIR spectroscopy indicates the partial deconfinement of the monatomic metal centers driven by CO at precatalysis temperatures, followed by the development of surface carbonate species under steady-state conditions. These findings are supported by DFT calculations, which show the driving force and final structure for the surface metal protrusion to be metal-dependent, but point to an equivalent octahedral-coordinated M4+ carbonate species as the resting state in all cases. Experimentally, apparent reaction activation energies in the range of 96 ± 19 kJ/mol are determined, with Pt leading to the lowest energy barrier. The results indicate that, for monatomic sites in SACs, differences in CO oxidation reactivity enforceable via metal selection are of lower magnitude than those evidenced previously through the mechanistic involvement of adjacent redox centers on the oxide carrier, suggesting that tuning of the oxide surface chemistry is as relevant as the selection of the supported metal., XAS experiments were performed at B18 beamline, Diamond Light Source, United Kingdom (proposals Nr. SP17377 and SP19072) and BL22 beamline, ALBA Light Source, Spain (experiment 2019023278). Beamline scientists D. Gianolio (Diamond) and L. Simonelli and C. Marini (ALBA) are acknowledged for their assistance with the beamline setup during XAS experiments. The authors are grateful to M. Garcı́a, E. Andrés, M. E. Martı́nez, and I. López (ITQ) for assistance during the XAS experiments. J. Ternieden (MPI-KOFO) is acknowledged for the performance of XRD experiments. J.M. Salas (ITQ) is acknowledged for his experimental contribution to the CO-FTIR studies, and M.D. Soriano and A. Muñoz for the recording of XP spectra. P.N.P. and F.S. acknowledge support by the state of Badem–Württemberg through bwHPC (bwUnicluster and JUSTUS, RV bw17D01) and support from the Helmholtz Association is also gratefully acknowledged. This research received funding from the Alexander von Humboldt Foundation (postdoctoral grant to B.B.S.), the Max Planck Society and the Fonds der Chemischen Industry (FCI, Germany). The authors are grateful to Prof. Ferdi Schüth for the provision of lab facilities and support throughout the project. Funding from the Spanish Ministry of Science, Innovation and Universities (projects SEV 2016-0683 and RTI2018-096399-A-100) is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-pot cooperation of single-atom Rh and Ru solid catalysts for a selective tandem olefin isomerization-hydrosilylation process

  • Sarma, Bidyut B.
  • Kim, Jonglack
  • Amsler, Jonas
  • Agostini, Giovanni
  • Weidenthaler, Claudia
  • Pfänder, Norbert
  • Arenal, Raúl
  • Concepción, Patricia
  • Plessow, Philipp
  • Studt, Felix
  • Prieto, Gonzalo
Realizing the full potential of oxide‐supported single‐atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one‐pot combination of Ru1/CeO2 and Rh1/CeO2 SACs enables a highly selective olefin isomerization‐hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double‐bond migration and anti‐Markovnikov α‐olefin hydrosilylation, respectively. First‐principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single‐pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio‐selectivity (>95 %) even from industrially‐relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide‐supported single‐atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes., X‐ray absorption experiments were performed at the ALBA Synchrotron Light Source (Spain), experiments 2018082961 and 2019023278. L. Simonelli and C. Marini (CLAESS‐ALBA beamline) are thanked for beamline setup. E. Andrés, M. E. Martínez, M. García, and I. López (ITQ), are acknowledged for their assistance with XAS experiments. J. Büscher, J. Ternedien, B. Spliethoff, and C. Wirtz (MPI‐KOFO) are acknowledged for the performance of XPS, XRD, BF‐TEM and 2H NMR experiments, respectively. I. C. de Freitas (MPI‐KOFO) is thanked for assistance with Raman spectroscopy. J. M. Salas (ITQ) is gratefully acknowledged for his contribution to CO‐FTIR experiments. J. J. Barnes and Shell (Amsterdam) are acknowledged for kindly providing an industrial olefin mixture as feed. Authors are thankful to F. Schüth for the provision of lab space and continued support. Part of the HRSTEM and EDX‐STEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016‐79776‐P (AEI/FEDER, UE) and from the European Union H2020 programs “ESTEEM3” (823717). The authors acknowledge support by the state of Baden‐Württemberg through bwHPC (bwUnicluster and JUSTUS, RV bw17D01), by the GRK 2450 and by the Helmholtz Association. This research received funding from the Max Planck Society, and the Fonds der Chemische Industrie of Germany. Funding from the Spanish Ministry of Science, Innovation and Universities (Severo Ochoa program SEV‐2016‐0683 and grant RTI2018‐096399‐A‐I00) is also acknowledged. B.B.S. acknowledges the Alexander von Humboldt Foundation for a postdoctoral scholarship. Open Access funding is provided by the Max Planck Society.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-Pot Cooperation of Single-Atom Rh and Ru Solid Catalysts for a Selective Tandem Olefin Isomerization-Hydrosilylation Process

  • Sarma, Bidyut B.
  • Kim, Jonglack
  • Amsler, Jonas
  • Agostini, Giovanni
  • Weidenthaler, Claudia
  • Pfänder, Norbert
  • Arenal, Raúl
  • Concepción, Patricia
  • Plessow, Philipp
  • Studt, Felix
  • Prieto, Gonzalo
Realizing the full potential of oxide‐supported single‐atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one‐pot combination of Ru1/CeO2 and Rh1/CeO2 SACs enables a highly selective olefin isomerization‐hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double‐bond migration and anti‐Markovnikov α‐olefin hydrosilylation, respectively. First‐principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single‐pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio‐selectivity (>95 %) even from industrially‐relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide‐supported single‐atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes., X‐ray absorption experiments were performed at the ALBA Synchrotron Light Source (Spain), experiments 2018082961 and 2019023278. L. Simonelli and C. Marini (CLAESS‐ALBA beamline) are thanked for beamline setup. E. Andrés, M. E. Martínez, M. García, and I. López (ITQ), are acknowledged for their assistance with XAS experiments. J. Büscher, J. Ternedien, B. Spliethoff, and C. Wirtz (MPI‐KOFO) are acknowledged for the performance of XPS, XRD, BF‐TEM and 2H NMR experiments, respectively. I. C. de Freitas (MPI‐KOFO) is thanked for assistance with Raman spectroscopy. J. M. Salas (ITQ) is gratefully acknowledged for his contribution to CO‐FTIR experiments. J. J. Barnes and Shell (Amsterdam) are acknowledged for kindly providing an industrial olefin mixture as feed. Authors are thankful to F. Schüth for the provision of lab space and continued support. Part of the HRSTEM and EDX‐STEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016‐79776‐P (AEI/FEDER, UE) and from the European Union H2020 programs “ESTEEM3” (823717). The authors acknowledge support by the state of Baden‐Württemberg through bwHPC (bwUnicluster and JUSTUS, RV bw17D01), by the GRK 2450 and by the Helmholtz Association. This research received funding from the Max Planck Society, and the Fonds der Chemische Industrie of Germany. Funding from the Spanish Ministry of Science, Innovation and Universities (Severo Ochoa program SEV‐2016‐0683 and grant RTI2018‐096399‐A‐I00) is also acknowledged. B.B.S. acknowledges the Alexander von Humboldt Foundation for a postdoctoral scholarship. Open Access funding is provided by the Max Planck Society., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Configurational landscape of chiral iron(ii) bis(phosphane) complexes

  • Estevan, F.
  • Feliz Rodríguez, Marta
The reaction of a chiral [FeH(η-H){(R,R)-Me-DuPhos}] ((R,R)-Me-DuPhos = (-)-1,2-bis[(2R,5R)-2,5-dimethylphospholano]benzene) complex with ethers and halides is investigated by NMR techniques. From this study, it is apparent that dihydrogen ligand exchange by poorly-coordinating donor molecules, such as THF or EtO, is feasible under mild conditions. The cis-[FeH(THF-d){(R,R)-Me-DuPhos}] complex is identified as the product in THF-d solution. A mixture of cis- and trans-[FeH(ether){(R,R)-Me-DuPhos}] isomers is obtained after the addition of small quantities of THF or EtO to a CDCl solution of [FeH(η-H){(R,R)-Me-DuPhos}]. The reaction of [FeH(η-H){(R,R)-Me-DuPhos}] with an excess of iodide or chloride salts in THF-d or CDCl affords initially cis- and trans-[FeHX{(R,R)-Me-DuPhos}] (X = Cl or I) isomers. The trans complex is the thermodynamic product obtained when X = Cl, whereas the cis isomer is obtained when X = I. These complexes evolve with time, and the pentacoordinated [FeX{(R,R)-Me-DuPhos}](A) (X = Cl, A = BF; X = A = I) and hexacoordinated trans-[FeCl{(R,R)-Me-DuPhos}] compounds are obtained as air-stable crystals and identified by X-ray diffraction and NMR techniques. Experiments done with (S,S)-Me-DuPhos ((+)-1,2-bis[(2S,5S)-2,5-dimethylphospholano]benzene) gave similar results, and the [FeI{(S,S)-Me-DuPhos}](ClO) compound has been crystallographically characterized., This research was supported by the Severo Ochoa Program (SEV-2016-0683), Ministerio de Ciencia e Innovación (RTI2018-096399), and the Consejo Superior de Investigaciones Científicas (CSIC) of the Universitat de València. We would like to thank the Servei Central d'Instrumetación Científica (SCIC) of the Universitat Jaume I for the X-ray facilities and the Servicio Central de Apoyo a la Investigación Experimental (SCSIE) of the Universitat de València for the NMR facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MOF-Mediated Synthesis of Supported Fe-Doped Pd Nanoparticles under Mild Conditions for Magnetically Recoverable Catalysis**

  • Darawsheh, M.D.
  • Mazarío, Jaime
  • Lopes, C.W.
  • Giménez-Marqués, Mónica
  • Dómine, Marcelo Eduardo
  • Meira, D.M.
  • Martínez, Jordan
  • Mínguez Espallargas, Guillermo
  • Oña-Burgos, Pascual
Metal–organic framework (MOF)-driven synthesis is considered as a promising alternative for the development of new catalytic materials with well-designed active sites. This synthetic approach is used here to gradually transform a new bimetallic MOF, with Pd and Fe as the metal components, by the in situ generation of aniline under mild conditions. This methodology results in a compositionally homogeneous nanocomposite formed by Fe-doped Pd nanoparticles that, in turn, are supported on iron oxide-doped carbon. The nanocomposite has been fully characterized by several techniques such as IR and Raman spectroscopy, TEM, XPS, and XAS. The performance of this nanocomposite as an heterogeneous catalyst for hydrogenation of nitroarenes and nitrobenzene coupling with benzaldehyde has been evaluated, proving it to be an efficient and reusable catalyst., This work has been supported by the European Union (ERC‐2016‐CoG 724681‐S‐CAGE), by the Spanish MICINN (Structures of Excellence Severo Ochoa SEV‐2016‐0683 and María de Maeztu CEX2019‐000919‐M; projects CTQ2017‐89528‐P, CTQ2015‐67592, PGC2018‐097277‐B‐100, and RTI2018‐096399‐A‐I00 co‐financed by FEDER). We also thank the Generalitat Valenciana (PROMETEO/2018/006 and PROMETEU/2019/066). G.M.E. and P.O.‐B. thank MICINN for their “Ramón y Cajal” fellowships. M.G.‐M thanks support of a fellowship from “la Caixa” Foundation (LCF/BQ/PI19/11690022) and Generalitat Valenciana (SEJI/2020/036). J.M. thanks MICINN for his PhD fellowship (CTQ2015‐67592). The authors also thank the Electron Microscopy Service of Universitat Politècnica de València for their support, M. P. Romero for her assistance with TEM measurements and Prof. E. Rodríguez‐Castellón for discussions on the XPS spectra interpretation. This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory and was supported by the U.S. DOE under contract no. DE‐AC02‐06CH11357, and the Canadian Light Source and its funding partners.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalt metal-organic framework based on layered double nanosheets for enhanced electrocatalytic water oxidation in neutral media

  • Gutiérrez-Tarriño, S.
  • Olloqui-Sariego, José Luis
  • Calvente, J.J.
  • Espallargas, G.M.
  • Rey García, Fernando
  • Corma, Avelino
  • Oña-Burgos, Pascual
A new cobalt metal-organic framework (2D-Co-MOF) based on well-defined layered double cores that are strongly connected by intermolecular bonds has been developed. Its 3D structure is held together by π-π stacking interactions between the labile pyridine ligands of the nanosheets. In aqueous solution, the axial pyridine ligands are exchanged by water molecules, producing a delamination of the material, where the individual double nanosheets preserve their structure. The original 3D layered structure can be restored by a solvothermal process with pyridine, so that the material shows a "memory effect"during the delamination-pillarization process. Electrochemical activation of a 2D-Co-MOF@Nafion-modified graphite electrode in aqueous solution improves the ionic migration and electron transfer across the film and promotes the formation of the electrocatalytically active cobalt species for the oxygen evolution reaction (OER). The so-activated 2D-Co-MOF@Nafion composite exhibits an outstanding electrocatalytic performance for the OER at neutral pH, with a TOF value (0.034 s-1 at an overpotential of 400 mV) and robustness superior to those reported for similar electrocatalysts under similar conditions. The particular topology of the delaminated nanosheets, with quite distant cobalt centers, precludes the direct coupling between the electrocatalytically active centers of the same sheet. On the other hand, the increase in ionic migration across the film during the electrochemical activation stage rules out the intersheet coupling between active cobalt centers, as this scenario would impair electrolyte permeation. Altogether, the most plausible mechanism for the O-O bond formation is the water nucleophilic attack to single Co(IV)-oxo or Co(III)-oxyl centers. Its high electrochemical efficiency suggests that the presence of nitrogen-containing aromatic equatorial ligands facilitates the water nucleophilic attack, as in the case of the highly efficient cobalt porphyrins., Programs Severo Ochoa SEV-2016-0683 and María de Maeztu CEX2019-000919-M are gratefully acknowledged. S.G.-T. thanks the MINECO for her FPU Ph.D. contract FPU16/02117. P.O.-B. and G.M.E. thank MICCIN for their Ramón y Cajal contracts RYC-2014-16620 and RYC-2013-14386. The authors acknowledge the financial support by the Spanish Government (RTI2018-096399-A-I00, RTI2018-101784-B-I00, CTQ2017-89528-P, and CTQ2014-52641-P) and Generalitat Valenciana (PROMETEU/2019/066). In addition, P.O.-B. thanks UPV for his grant PAID-06-18/SP20180172. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

AgY zeolite as catalyst for the selective catalytic oxidation of NH3

  • Martinez-Ortigosa, Joaquin
  • Lopes, Christian W.
  • Agostini, Giovanni
  • Palomares Gimeno, Antonio Eduardo
  • Blasco, Teresa
  • Rey García, Fernando
Ag-exchanged Y zeolites (Si/Al = 2.5; Ag/Al = 0.30–0.95) have been tested in the NH–SCO reaction, the most promising method for the elimination of ammonia emissions, and deeply characterized before and after reaction by using a variety of techniques (XRD, TEM, UV–Vis, Ag NMR, XAS spectroscopies). The most active centres for the NH–SCO reaction are Ag nanoparticles (NPs) formed under reduction conditions and both activity and selectivity to N increase with the silver loading. The Ag NPs are dramatically modified under reaction conditions, being most of them dispersed resulting in small clusters and even atomically Ag cations, the latter accounting for around half silver atoms. The presence of water into the reaction feed promotes the dispersion and oxidation of silver nanoparticles, but the catalyst performance is only slightly affected. The results are fully consistent with the previously proposed i-SCR mechanism for NH–SCO reaction on silver catalysts., Financial support by the Ministerio de Ciencia e Innovación (MICINN) of Spain through the Severo Ochoa (SEV-2016-0683), RTI2018-101784-B-I00, RTI2018-09639-A-I00 and InnovaXN-26-2019 projects is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the electron density of cobalt oxide clusters to provide highly selective superoxide and peroxide species for aerobic cyclohexane oxidation

  • Gutiérrez-Tarriño, S.
  • Gaona-Miguélez, José
  • Oña-Burgos, Pascual
The catalytic aerobic cyclohexane oxidation to cyclohexanol and cyclohexanone (KA oil) is an industrially relevant reaction. This work is focused on the synthesis of tailor-made catalysts based on the well-known Co4O4 core in order to successfully deal with cyclohexane oxidation reaction. The catalytic activity and selectivity of the synthesized catalysts can be correlated with the electronic density of the cluster, modulated by changing the organic ligands. This is not trivial in cyclohexane oxidation. Furthermore, the reaction mechanism is discussed on the basis of kinetics and spin trapping experiments, confirming that the electronic density of the catalyst has a clear influence on the distribution of the reaction products. In addition, in situ Raman spectroscopy was used to characterize the oxygen species formed on the cobalt cluster during the oxidation reaction. Altogether, it can be concluded that the catalyst with the highest oxidation potential promotes the formation of peroxide and superoxide species, which is the best way to oxidize inactivated CH bonds in alkanes. Finally, based on the results of the mechanistic studies, the contribution of these cobalt oxide clusters in each single reaction step of the whole process has been proposed., The authors thank Prof. A. Corma for his support and discussion on this work. S. G.-T. thanks MINECO for an FPU Ph.D. contract FPU16/02117. P. O.-B. is grateful for the financial support given by the Spanish Government (RTI2018-096399-A-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalt nanoclusters coated with N-doped carbon for chemoselective nitroarene hydrogenation and tandem reactions in water

  • Gutiérrez-Tarriño, S.
  • Rojas-Buzo, Sergio
  • Lopes, Christian W.
  • Agostini, Giovanni
  • Calvino, José J.
  • Corma, Avelino
  • Oña-Burgos, Pascual
The development of active and selective non-noble metal-based catalysts for the chemoselective reduction of nitro compounds in aquo media under mild conditions is an attractive research area. Herein, the synthesis of subnanometric and stable cobalt nanoclusters, covered by N-doped carbon layers as core-shell (Co@NC-800), for the chemoselective reduction of nitroarenes is reported. TheCo@NC-800catalyst was prepared by the pyrolysis of the Co(tpy)complex impregnated on Vulcan carbon. In fact, the use of a molecular complex based on six N-Co bonds drives the formation of a well-defined and distributed cobalt core-shell nanocluster covered by N-doped carbon layers. In order to elucidate its nature, it has been fully characterized by using several advanced techniques. In addition, this as-prepared catalyst showed high activity, chemoselectivity and stability toward the reduction of nitro compounds with Hand under mild reaction conditions; water was used as a green solvent, improving the previous results based on cobalt catalysts. Moreover, theCo@NC-800catalyst is also active and selective for the one-pot synthesis of secondary aryl amines and isoindolinones through the reductive amination of nitroarenes. Finally, based on diffraction and spectroscopic studies, metallic cobalt nanoclusters with surface CoNpatches have been proposed as the active phase in theCo@NC-800material., The authors acknowledge the financial support from the Spanish Government (RTI2018-096399-A-I00) and the Program Severo Ochoa SEV-2016-0683. S. G. T. is thankful to MINECO for her FPU Ph.D. contract FPU16/02117. P. O.-B. is thankful to MICCIN for his Ramón y Cajal contract RYC-2014-16620 and to UPV for the grant PAID-06-18/SP20180172The High-Resolution STEM data were recorded at the DME-UCA node of the ELECMI ICTS Spanish National Infrastructure for Electron Microscopy of Materials. JJC acknowledges financial support from MINECO/FEDER (Project MAT2017-97579-R). C. W. L. acknowledges the Visiting Researcher Fellowship from PRH 50.1 – ANP/FINEP Human Resources Program (Brazil)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rh2P Nanoparticles Stabilized by Carbon Patches for Hydroformylation of Olefins

  • Galdeano-Ruano, Carmen
  • Lopes, Christian W.
  • Motta Meira, D.
  • Corma, Avelino
  • Oña-Burgos, Pascual
Rh2P nanoparticles (NPs) have been identified as suitable mimics of [RhI(Ph3P)3]+, the benchmark of homogeneous catalysts in liquid-phase hydroformylation. For this reason, a fitted synthetic strategy is required to develop catalysts based exclusively on Rh2P NPs. To attain this, two synthetic pathways have been devised. In the first one, two separate sources of Rh and P were used. In the second one, the Wilkinson complex was employed as a unique source of Rh and P to probe the positive influence of the well-defined molecular organization on the preparation of dispersed and controlled Rh2P nanoparticles, stabilized by carbon patches formed during the pyrolysis treatment from PPh3. In addition, metallic Rh nanoparticles were also synthesized to be used as reference. All catalysts have been compared by means of: transmission electron microscopy, X-ray diffraction, and X-ray adsorption spectroscopy. The application of XAS to the study of Rh2P NPs is unusual and has been essential in the discussion of the results. Starting with a well-defined metal precursor leads to the exclusive formation of Rh2P NPs with excellent catalytic activity for the liquid-phase hydroformylation. The role of P is to modulate the particle size and the electronic configuration of Rh species, resulting in the improvement of the catalytic performance and the obtention of turnover frequencies of 5236 h-1 at 60 °C and 17,788 h-1 at 100 °C., Program Severo Ochoa SEV-2016-0683 is gratefully acknowledged. C.G.-R. thanks MINECO for her FPU Ph.D. contract FPU17/04172. The authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00). The authors thank J.G.M. for his technical support. We also thank the Electron Microscopy Service of the UPV for TEM facilities. C.W.L. thanks PRH 50.1 – ANP/FINEP Human Resources Program for the Visiting Researcher Fellowship. This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by the Argonne National Laboratory and was supported by the U.S. DOE under contract no. DE-AC02-06CH11357 and the Canadian Light Source and its funding partners., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bottom-up assembly of bimetallic nanocluster catalysts from oxide-supported single-atom precursors

  • Sarma, Bidyut B.
  • Agostini, Giovanni
  • Farpón, Marcos G.
  • Marini, Carlo
  • Pfänder, Norbert
  • Prieto, Gonzalo
The precise synthesis and stabilization of oxide-supported bimetallic clusters in the low-to-sub nanometer size regime is highly relevant in various fields, from optics and sensing to electrochemistry and catalysis. In surface-driven phenomena such as catalysis, avoiding metal segregation and agglomeration is essential for performance and stability under relevant operation conditions. Here we show how high-temperature oxidative crystal redispersion and oxide atom-trapping phenomena provide a widely valid route towards atomically dispersed bimetallic precursors which, upon reductive metal agglomeration, result in very small, uniformly sized and remarkably stable bimetallic clusters. For a PdPt/MgO system, oxidative redispersion leads to isolated Pd and Pt atoms stabilized by the MgO support up to overall surface metal contents ofca.1.0 Mnm, beyond which loading, atom-trapping oxide sites become exhausted and metal aggregation sets in. On the contrary, more conventional, milder-temperature activation protocols lead to significant metal segregation and markedly bimodal particle size populations already from comparatively lower metal contents. As proven byin situX-ray absorption spectroscopy and atomic-resolution STEM microscopy, the stabilization of isolated Pd and Pt cations within nanometer distances on the common MgO support is essential for the synthesis ofca.1 nm bimetallic PdPt clusters by reductive agglomeration. The uniformly sized PdPt aggregates developed on MgO from single-atom precursors display a notably higher activity for the oxidative activation of methane with carbon dioxide (dry reforming) at 923 K compared to analogue materials synthesizedviamilder calcination/reduction protocols. Moreover, despite their high surface-to-volume ratio, the small bimetallic clusters in the former display an outstanding stability against metal agglomeration under the demanding reaction conditions, likely as a result of a lower driving force for Ostwald ripening growth processes. The synthesis concept, which is amenable to other combinations of 4d and 5d transition metals, contributes to the rationalization of the possibilities and bounds of oxidative metal redispersion phenomena and provides a technically simple and potentially general route to high-temperature stable, (sub)nanometer bimetallic clusters for catalysis and other applications where bimetallic effects and thermal stability are of importance., This research received funding from the Max Planck Society and the Spanish Ministry of Science and Innovation (RTI2018-096399-A-100 and SEV-2016-0683). B. B. S. acknowledges the Alexander von Humboldt Foundation for a postdoctoral grant. M. G. F. acknowledges the Spanish Ministry of Science, Innovation and Universities for a FPU predoctoral scholarship (FPU17/04701). Open Access funding provided by the Max Planck Society.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzyme-like activity of cobalt-MOF nanosheets for hydrogen peroxide electrochemical sensing

  • Portorreal-Bottier, Arismendy
  • Gutiérrez-Tarriño, S.
  • Calvente, Juan José
  • Andreu, Rafael
  • Roldán, Emilio
  • Oña-Burgos, Pascual
  • Olloqui-Sariego, José Luis
Metal-organic frameworks (MOFs) are receiving increased attention as new functional nanomaterials for the development of electrochemical sensors. Herein, we develop an electrochemical platform for non-enzymatic hydrogen peroxide detection built with a composite of two-dimensional cobalt MOF nanosheets and Nafion (2D-Co-MOF@Nafion). The feasibility of the 2D-Co-MOF@Nafion composite as active material for high performance hydrogen peroxide sensor was investigated by using cyclic voltammetry and chronoamperometry. Its voltammetric response reveals an efficient charge transport through the MOF composite, and rapid electron exchange between MOF and electrode. Notably, these MOF nanosheets exhibit enzyme-like activity for the non-common catalytic oxidation of hydrogen peroxide, leading to an electrochemical sensor with rapid quantitative detection, outstanding sensitivity, selectivity, stability, and durability at the desirable neutral pH. In particular, for a cobalt metal loading of 1.2 nanomol, the sensor yields amperometric HO detection with characteristic electrocatalytic parameters of i= 5.7 mA cm and K = 13 mM. Moreover, linear ranges of up to either 1 mM or 10 mM are achieved, with sensitivities as high as 570 ± 5 A cm mM or 395 ± 10 A cm mM for the low and high concentration ranges, respectively. The particular coordination chemistry of the MOF consisting of a regular arrangement of multiple Co(II) redox metal sites connected by appropriate organic ligands can provide inherent enzyme-mimicking properties, thereby explaining the higher oxidase-like activity of the present MOF. This work raises the new idea of using two-dimensional cobalt-based MOFs as active nanozymes, offering exciting opportunities in the design of non-enzymatic electrochemical sensing devices., Authors thank the financial support by the Spanish Government (RTI2018–096399-A-I00) and Junta de Andalucía (P20_01027 and PYC 20 RE 060 UAL)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bimetallic Intersection in PdFe@FeOx-C Nanomaterial for Enhanced Water Splitting Electrocatalysis

  • Martínez, Jordan
  • Mazarío, Jaime
  • Olloqui-Sariego, José Luis
  • Calvente, Juan José
  • Darawsheh, Mohanad D.
  • Mínguez Espallargas, Guillermo
  • Dómine, Marcelo Eduardo
  • Oña-Burgos, Pascual
Supported Fe-doped Pd-nanoparticles (NPs) are prepared via soft transformation of a PdFe-metal oraganic framework (MOF). The thus synthesized bimetallic PdFe-NPs are supported on FeO@C layers, which are essential for developing well-defined and distributed small NPs, 2.3 nm with 35% metal loading. They are used as bifunctional nanocatalysts for the electrocatalytic water splitting process. They display superior mass activity for the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER), both in alkaline and acid media, compared with those obtained for benchmarking platinum HER catalyst, and ruthenium, and iridium oxide OER catalysts. PdFe-NPs also exhibit outstanding stability against sintering that can be explained by the protecting role of graphitic carbon layers provided by the organic linker of the MOF. Additionally, the superior electrocatalytic performance of the bimetallic PdFe-NPs compared with those of monometallic Pd/C NPs and FeO points to a synergetic effect induced by Fe–Pd interactions that facilitates the water splitting reaction. This is supported by additional characterization of the PdFe-NPs prior and post electrolysis by TEM, XRD, X-ray photoelectron spectroscopy, and Raman revealing that dispersed PdFe NPs on FeO@C promote interactions between Pd and Fe, most likely to be Pd–O–Fe active centers., The authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00). This work has been supported by grants PID2020-117177GB-I00 and CEX2019-000919-M, funded by MCIN/AEI/10.13039/501100011033, Junta de Andalucía (P20_01027 and PYC 20 RE 060 UAL), and the Generalitat Valenciana (PROMETEU2019/066). J. Mazarío thanks the MICINN (CTQ2015-67592) for his Ph.D. scholarship. The authors thank CITIUS-Universidad de Sevilla for providing XPS measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rhodium Single-Atom Catalyst Design through Oxide Support Modulation for Selective Gas-Phase Ethylene Hydroformylation

  • Farpón, Marcos G.
  • Henao, Wilson
  • Plessow, Philipp
  • Andrés, Eva
  • Arenal, Raúl
  • Marini, Carlo
  • Agostini, Giovanni
  • Studt, Felix
  • Prieto, Gonzalo
A frontier challenge in single-atom (SA) catalysis is the design of fully inorganic sites capable of emulating the high reaction selectivity traditionally exclusive of organometallic counterparts in homogeneous catalysis. Modulating the direct coordination environment in SA sites, via the exploitation of the oxide support's surface chemistry, stands as a powerful albeit underexplored strategy. We report that isolated Rh atoms stabilized on oxygen-defective SnO2 uniquely unite excellent TOF with essentially full selectivity in the gas-phase hydroformylation of ethylene, inhibiting the thermodynamically favored olefin hydrogenation. Density Functional Theory calculations and surface characterization suggest that substantial depletion of the catalyst surface in lattice oxygen, energetically facile on SnO2, is key to unlock a high coordination pliability at the mononuclear Rh centers, leading to an exceptional performance which is on par with that of molecular catalysts in liquid media., This work received funding from the European Research Council (ERC-2019-CoG 864195) and project RTI2018-096399-A-I00 funded by MCIN/AEI/10.13039/501100011033/ and “ERDF A way of making Europe”. M.G.F, E.A. and W.H. acknowledge support by their predoctoral grants FPU17/04701, FPU17/04751 and PRE2019-087571, respectively. R.A. acknowledges support from the Spanish MICIN (PID2019-104739GB-100/AEI/10.13039/501100011033), Government of Aragon (DGA E13-20R) and EU H2020 “ESTEEM3” (823717). P.N.P and F.S. acknowledge support by the state of Baden-Württemberg through bwHPC (bwunicluster and JUSTUS, RV bw17D011) and the Helmholtz Association. XAS experiments were performed at CLÆSS and NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff, R. Peláez, N. Atashi and M.E. Martínez. M. Boronat is thanked for support with slab model relaxations. V. Recio, J.M. Salas, A. Muñoz and M.D. Soriano are acknowledged for experimental contributions to catalyst synthesis, FTIR, Raman and XPS measurements, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct Conversion of Syngas to Higher Alcohols via Tandem Integration of Fischer–Tropsch Synthesis and Reductive Hydroformylation

  • Jeske, Kai
  • Rösler, Thorsten
  • Belleflamme, Maurice
  • Rodenas, Tania
  • Fischer, Nico
  • Claeys, Michael
  • Leitner, Walter
  • Vorholt, Andreas J.
  • Prieto, Gonzalo
The selective conversion of syngas to higher alcohols is an attractive albeit elusive route in the quest for effective production of chemicals from alternative carbon resources. We report the tandem integration of solid cobalt Fischer–Tropsch and molecular hydroformylation catalysts in a one-pot slurry-phase process. Unprecedented selectivities (>50 wt %) to C alcohols are achieved at CO conversion levels >70 %, alongside negligible CO side-production. The efficient overall transformation is enabled by catalyst engineering, bridging gaps in operation temperature and intrinsic selectivity which have classically precluded integration of these reactions in a single conversion step. Swift capture of 1-olefin Fischer–Tropsch primary products by the molecular hydroformylation catalyst, presumably within the pores of the solid catalyst is key for high alcohol selectivity. The results underscore that controlled cooperation between solid aggregate and soluble molecular metal catalysts, which pertain to traditionally dichotomic realms of heterogeneous and homogeneous catalysis, is a promising blueprint toward selective conversion processes., This work received funding from the German Ministry for Education and Research (BMBF, 01DG17019 CAT2BIOL) and the European Research Council (ERC-2019-COG 864195, TANDEng). Parts of this research have also received funding from the Spanish Ministry of Science and Innovation (RTI2018-096399-A-100), the EU Horizon 2020 research and innovation programme under Grant Agreement no. 817612 (REDIFUEL) and the Max Planck Society. W.L. acknowledges the “Fuel Science Center”, funded by the German Research Foundation (DFG) (grant Nr. 390919832), for continuing support. Sasol and Eurosupport are thanked for the provision of Al2O3 precursors. Prof. F. Schüth (MPI-KOFO) is gratefully thanked for lab space allocation and supportive access to research instrumentation. A. Gurowski (MPI-CEC), N. Pfänder (MPI-CEC), V. Dietl (MPI-KOFO) and M. Fadlalla (UCT) are acknowledged for contributions to ICP-MS, STEM/EDS, offline GC and 2DGC analyses, respectively. Staff of the EM unit at the UPV are acknowledged for technical assistance with microscopy characterization. Open Access funding enabled and organized by Projekt DEAL.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructured Hybrids Based on Tantalum Bromide Octahedral Clusters and Graphene Oxide for Photocatalytic Hydrogen Evolution

  • Hernández Niño, Jhon Sebastián
  • Shamshurin, Maxim
  • Puche, Marta
  • Sokolov, Maxim N.
  • Feliz Rodríguez, Marta
The generation of hydrogen (H) using sunlight has become an essential energy alternative for decarbonization. The need for functional nanohybrid materials based on photo- and electroactive materials and accessible raw materials is high in the field of solar fuels. To reach this goal, single-step synthesis of {TaBr}@GO (GO = graphene oxide) nanohybrids was developed by immobilization of [{TaBr}Br(HO)]·4HO (i = inner and a = apical positions of the Ta octahedron) on GO nanosheets by taking the advantage of the easy ligand exchange of the apical cluster ligands with the oxygen functionalities of GO. The nanohybrids were characterized by spectroscopic, analytical, and morphological techniques. The hybrid formation enhances the yield of photocatalytic H from water with respect to their precursors and this is without the presence of precious metals. This enhancement is attributed to the optimal cluster loading onto the GO support and the crucial role of GO in the electron transfer from Ta clusters into GO sheets, thus suppressing the charge recombination. In view of the simplicity and versatility of the designed photocatalytic system, octahedral tantalum clusters are promising candidates to develop new and environmentally friendly photocatalysts for H evolution., This research was funded by Ministerio de Ciencia e Innovación (MICINN), grant number PGC2018-099744. Parts of this research dealing with metal cluster synthesis and characterization received funding from project RTI2018-096399-A-I00 funded by MCIN/AEI/10.13039/501100011033/ and “ERDF A way of making Europe”. J.S.H. gratefully acknowledges the Consejo Superior de Investigaciones Científicas (CSIC) and Generalitat Valenciana (GVA), Programa Santiago Grisolía, grant number GRISOLIA/2021/054. M.S. received financial support by the Russian Foundation for Basic Research (grant number 20-33-90010) and the Ministry of Science and Higher Education of the Russian Federation (grant number 121031700313–8). The APC was funded by this journal.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sustainable Synthesis of Silicon Precursors Coupled with Hydrogen Delivery Based on Circular Economy via Molecular Cobalt-Based Catalysts

  • Gutiérrez-Tarriño, S.
  • Rojas-Buzo, Sergio
  • Ortuño, Manuel A.
  • Oña-Burgos, Pascual
The development of a circular economy is a key target to reduce our dependence on fossil fuels and create more sustainable processes. Concerning hydrogen as an energy vector, the use of liquid organic hydrogen carriers is a promising strategy, but most of them present limitations for hydrogen release, such as harsh reaction conditions, poor recyclability, and low-value byproducts. Herein, we present a novel sustainable methodology to produce value-added silicon precursors and concomitant hydrogen via dehydrogenative coupling by using an air- and water-stable cobalt-based catalyst synthesized from cheap and commercially available starting materials. This methodology is applied to the one-pot synthesis of a wide range of alkoxy-substituted silanes using different hydrosilanes and terminal alkenes as reactants in alcohols as green solvents under mild reaction conditions (room temperature and 0.1 mol % cobalt loading). We also demonstrate that the selectivity toward hydrosilylation/hydroalkoxysilylation can be fully controlled by varying the alcohol/water ratio. This implies the development of a circular approach for hydrosilylation/hydroalkoxysilylation reactions, which is unprecedented in this research field up to date. Kinetic and in situ spectroscopic studies (electron paramagnetic resonance, nuclear magnetic resonance, and electrospray ionization mass spectrometry), together with density functional theory simulations, further provide a detailed mechanistic picture of the dehydrogenative coupling and subsequent hydrosilylation. Finally, we illustrate the application of our catalytic system in the synthesis of an industrially relevant polymer precursor coupled with the production of green hydrogen on demand. copy; 2022 American Chemical Society., This work has received financial support from Spanish Government (RTI2018-096399-A-I00 and PID2020-119116RA-I00), Junta de Andalucía (P20_01027 and PYC 20 RE 060 UAL), Xunta Distinguished Researcher program (ED431H 2020/21), the Xunta de Galicia (Centro singular de investigación de Galicia accreditation 2019-2022, ED431G 2019/03), and the European Union (European Regional Development Fund, ERDF). S.R.-B. acknowledges the Margarita Salas grant financed by Ministerio de Universidades, Spain, and funded by the European Union-Next Generation EU. M.A.O. acknowledges CESGA (“Centro de Supercomputación de Galicia”) for providing generous computational resources.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A tandem process for in situ H2O2 formation coupled with benzyl alcohol oxidation using Pd-Au bimetallic catalysts

  • Martínez, Jordan
  • Mazarío, Jaime
  • Gutiérrez-Tarriño, S.
  • Galdeano-Ruano, Carmen
  • Gaona-Miguélez, José
  • Dómine, Marcelo Eduardo
  • Oña-Burgos, Pascual
Alcohol oxidation is one of the most important industrial organic reactions. Traditionally, the best-suited catalysts are Pd, Pt and Au supported nanoparticles. The research community has recently started developing strategies for synthesizing carbon-supported Pd/Au bimetallic nanoparticles (NPs), leading to higher activities and selectivities. However, the metallic active species in these catalysts are usually generated using sodium borohydride (NaBH), which is not synthetically easy to reproduce. In fact, minor modifications in pH, concentration and/or other parameters have a prominent effect on the nature of the promoted material. In this work, a robust process involving dihydrogen flow (H) at 200 °C as a reducing agent for synthesizing Pd/Au supported bimetallic materials was considered an alternative to the common pathway. The physicochemical properties of the materials derived from different reducing reagents and of varying composition ranges were studied using HR-TEM, XRD, CO chemisorption, and XPS. Their stability and activity were also tested for benzyl alcohol oxidation to benzaldehyde under mild reaction conditions (60 °C, water as the solvent, and PO = 1.5 bar). Notably, a catalyst from the hydrogen reduction process with a metal composition of 0.8%Pd-0.2%Au/C consisting of bimetallic clusters (≈1.5 nm) proved to be the best material (C = 94%, S = 99%). Catalytic performances were strongly correlated with structural properties, such as nanoparticle size and distribution, which, in turn, were affected by the reduction step and the metal composition range. Finally, the influence of oxidants on benzyl alcohol oxidation has also been studied, along with the first approach for the tandem in situ formation of HO coupled with alcohol oxidation., The authors are thankful for the financial support by the Spanish Government (RTI2018-096399-A-I00 and PGC2018-097277-B-I00 funded by MICINN/AEI/10.13039/501100011033) and Junta de Andalucía (P20 01027 and PYC 20 RE 060 UAL). The electron microscopy service of the UPV is acknowledged for their help in sample characterization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the potential-induced activation of a cobalt MOF electrocatalyst for the oxygen evolution reaction

  • Gutiérrez-Tarriño, S.
  • Portorreal-Bottier, Arismendy
  • Trasobares, Susana
  • Calvente, Juan José
  • Calvino, Jose J.
  • Olloqui-Sariego, José Luis
  • Oña-Burgos, Pascual
Metal–organic frameworks (MOFs) are attractive porous materials for electrocatalytic applications associated with carbon-free energy storage and conversion. This type of material usually requires a post-treatment to be used as electrocatalyst. The present work comprehensively investigates the electrochemical activation of a cobalt-MOF@Nafion composite that produces outstanding electrocatalytic performance for the water oxidation reaction at neutral pH. A detailed electrochemical characterization reveals that the electroactivation of the composite requires the participation of the oxygen evolution reaction (OER) and leads to a significant increase in the electroactive population of cobalt centers. It is shown that an increase of the applied activation potential in the OER region results in a faster electroactivation of the Co-MOF without affecting the intrinsic electrocatalytic properties of the active cobalt centers, as evidenced by the unique linear correlation between the electrocatalytic OER current and the population of electroactive cobalt. In addition, at structural level, it is shown that the electrochemical activation causes the partial disruption of the Nafion adlayer, as well as morphological changes of the Co–MOF particles from a compact, rounded morphology, before electrochemical activation, to a more open and expanded structure, after electroactivation; with the concomitant increase of the number of surface–exposed cobalt centers. Interestingly, these cobalt centers retain their coordinative chemistry and their laminar distribution in the nanosheets at the nanoscale, which is consistent with the preservation of their intrinsic electrocatalytic activity after potential–induced activation. In this scenario, these results suggest that only the electroactivated cobalt centers with good accessibility to the electrolyte are electrochemically active. This work provides a better understanding of the processes and structural changes underlying the electrochemical activation at neutral pH of a Co–MOF for boosting the electrocatalytic water oxidation reaction., Authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, PID2020-113006RB-I00, PID2021-126799NB-I00, TED2021-130191B-C41, TED2021-130191B-C42 and TED2021-130191B-C44 funded by MCIN/AEI/ 10.13039/501100011033) and Junta de Andalucía (P20-01027 and PYC 20 RE 060 UAL). The authors acknowledge funding from the European Union’s Horizon 2020 research and innovation program under Grant 823717-ESTEEM3. Electron microscopy studies were performed at the DME-UCA node of the Spanish Unique Infrastructure (ICTS) on Electron Microscopy of Materials ELECMI. The authors thank Dr. A. Raya-Baron for his support on this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultra-low metal loading rhodium phosphide electrode for efficient alkaline hydrogen evolution reaction

  • Galdeano-Ruano, Carmen
  • Márquez, Inmaculada
  • Wittee Lopes, C.
  • Calvente, Juan José
  • Agostini, Giovanni
  • Roldan, A.
  • Olloqui-Sariego, José Luis
  • Oña-Burgos, Pascual
The practical production of hydrogen from water electrolyzers demands efficient electrocatalysts with maximized and optimized active sites that promote the Hydrogen Evolution Reaction (HER) at wide pH ranges. Herein, we successfully synthesized a rhodium-based nanomaterial with extremely low metal loading (2 μg/cm) as electrocatalyst for the HER. In particular, the material consists of carbon-supported rhodium phosphide (RhP) as active sites, which are partially covered with carbon patches. The so-developed nanomaterial exhibits high crystallinity, resistance to sintering, and outstanding electrocatalytic activity and operational stability in an extended pH interval. Notably, RhP displays specific-mass activities, ca. 2.5- and 5-fold higher than those of the benchmark 20 wt% Pt/C at an overpotential of 50 mV in acidic and alkaline media, respectively. Comparison of the electrocatalytic performance of the current RhP electrocatalyst with those of phosphorus-free rhodium NPs and an alternative rhodium phosphide nanomaterial, reveals that the inclusion of phosphorus atoms, the purity and crystallinity of the RhP phase are critical to boost the electrocatalytic HER. This is corroborated by theoretical simulations using DFT, which also prove that the presence of C-patches on RhP favors the HO dissociation during HER electrocatalytic cycle and prevents phosphorous leaching. Overall, this work provides new insights for the rational design and controlled synthesis of small NPs for using as efficient electrocatalysts in hydrogen-based renewable energy devices., CGR thanks to MINECO for her FPU Ph.D. contract FPU17/04172. CWL thanks the PRH 50.1 – ANP/FINEP Human Resources Program for the Visiting Researcher Fellowship. These experiments were performed at CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff. S. Gutiérrez-Tarriño, J. S. Martinez, A. García-Zaragoza and W. Henao are acknowledged for their assistance with XAS data acquisition. Authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00, PID2021-126799NB-I00, TED2021-130191B-C41, supported by MCIN/AEI /10.13039/501100011033 and by Unión Europea NextGenerationEU/ PRTR, and TED2021-130191B-C42), Junta de Andalucía (P20_01027 and PYC 20 RE 060 UAL) and Generalitat Valenciana (MFA/2022/047, Advanced Materials programme, which was supported by MCIN with funding from European Union NextGeneration EU PRTR-C17.I1 and Generalitat Valenciana). We are thankful for the Electron Microscopy Service of the UPV for TEM facilities. We also acknowledge Supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ni/Ru@NC-CeO2 composite for hydrogen evolution reaction in alkaline media: Effect of CeO2 decoration with Ru@NC on the catalytic activity

  • Loiacono, Antonella
  • Gutiérrez-Tarriño, S.
  • Benavente Llorente, Victoria
  • Lacconi, Gabriela
  • Oña-Burgos, Pascual
  • Franceschini, Esteban A.
The design of composites with controlled interfaces has proven to be an efficient approach to obtaining highly active electrocatalysts for the hydrogen evolution reaction with improved stability. In this work, we report the preparation of Ni-based composites by co-depositing commercial CeO nanoparticles and Ru nanoparticles with N-doped carbon patches supported onto CeO (Ru@NC-CeO) using a facile electrodeposition method. The Ru@NC-CeO nanoparticles were obtained through the impregnation of CeO with Ru organometallic precursor and subsequent pyrolysis. A comprehensive chemical, structural and morphological characterization of the synthesized nanoparticles and co-deposit composites is presented. The cyclic voltammetry analysis showed that the composites exhibit a higher current density in comparison to the conventional nickel Watts catalyst; specifically a ∼ 48 % increase for the CeO-containing composite, and ∼ 105 % for the Ru@NC-CeO based composite. This study demonstrates that the small addition of Ru to the CeO nanoparticles on the nickel matrix can improve drastically the performance towards HER in alkaline media., V.B.L acknowledges the Asociación Universitaria Iberoamericana de Postgrado (AUIP) for the postdoctoral fellowship with reference AUIP-21-C225-VBL. A.L thanks CONICET for her doctoral fellowship. V.B.L thanks CONICET for a postdoctoral fellowship. G.I.L. and E.A.F. are permanent research fellows of CONICET. This work was supported by projects from FONCyT PICT–2017-0250 and PICT 2019-0856 (Argentina), CONICET PUE2017 and PIP 179025, and SECyT–UNC. S.G.T and P.O.B thanks the project RTI2018-096399-A-I00 funded by MCIN/AEI/10.13039/501100011033 and Junta de Andalucía (P20 01027 and PYC 20 RE 060 UAL). The authors thank LAMARX, LANN-INFIQC laboratories for their assistance in XPS and SEM/EDX, Raman spectroscopy, and XRD measurements, respectively. G.I.L. thanks to the Alexander Von Humboldt Foundation for the equipment subsidy grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Developing and understanding Leaching-Resistant cobalt nanoparticles via N/P incorporation for liquid phase hydroformylation

  • Galdeano-Ruano, Carmen P.
  • Gutiérrez-Tarriño, Silvia
  • Lopes, Christian Wittee
  • Mazarío, Jaime
  • Chinchilla, Lidia E.
  • Agostini, Giovanni
  • Calvino-Gámez, José Juan
  • Holgado, J. P.
  • Rodríguez-Castellón, Enrique
  • Roldán, Alberto
  • Oña-Burgos, Pascual
The ultimate target in heterogeneous catalysis is the achievement of robust, resilient and highly efficient materials capable of resisting industrial reaction conditions. Pursuing that goal in liquid-phase hydroformylation poses a unique challenge due to carbon monoxide-induced metal carbonyl species formation, which is directly related to the formation of active homogeneous catalysts by metal leaching. Herein, supported heteroatom-incorporated (P and N) Co nanoparticles were developed to enhance the resistance compared with bare Co nanoparticles. The samples underwent characterization using operando XPS, XAS and HR electron microscopy. Overall, P- and N-doped catalysts increased reusability and suppressed leaching. Among the studied catalysts, the one with N as a dopant, CoN@NC, presents excellent catalytic results for a Co-based catalyst, with a 94% conversion and a selectivity to aldehydes of 80% in only 7.5 h. Even under milder conditions, this catalyst outperformed existing benchmarks in Turnover Numbers (TON) and productivity. In addition, computational simulations provided atomistic insights, shedding light on the remarkable resistance of small Co clusters interacting with N-doped carbon patches., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, TED2021-130756B-C31 and TED2021-130191B-C44, PID2020-119946RB-I00, US-1263455funded by MCIN/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 101022507. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. We also acknowledge the supercomputing Wales for access to the Hawk HPC facility, part-funded by the European Regional Development Fund via the Welsh Government. Some of these experiments were performed at CLAESS (beamtime 2021095439) and CIRCE (beamtime 2022096991) beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Virginia Pérez, Ignacio Villar and Carlo Marini)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient Alkyne Semihydrogenation Catalysis Enabled by Synergistic Chemical and Thermal Modifications of a PdIn MOF

  • Martínez, Jordan
  • Mazarío, Jaime
  • Lopes, Christian W.
  • Trasobares, Susana
  • Calvino Gamez, Jose Juan
  • Agostini, Giovanni
  • Oña-Burgos, Pascual
Recently, there has been a growing interest in using MOF templating to synthesize heterogeneous catalysts based on metal nanoparticles on carbonaceous supports. Unlike the common approach of direct pyrolysis of PdIn-MOFs at high temperatures, this work proposes a reductive chemical treatment under mild conditions before pyrolysis (resulting in PdIn-QT). The resulting material (PdIn-QT) underwent comprehensive characterization via state-of-the-art aberration-corrected electron microscopy, N physisorption, X-ray absorption spectroscopy, Raman, X-ray photoelectron spectroscopy, and X-ray diffraction. These analyses have proven the existence of PdIn bimetallic nanoparticles supported on N-doped carbon. In situ DRIFT spectroscopy reveals the advantageous role of indium (In) in regulating Pd activity in alkyne semihydrogenation. Notably, incorporating a soft nucleation step before pyrolysis enhances surface area, porosity, and nitrogen content compared to direct MOF pyrolysis. The optimized material exhibits outstanding catalytic performance with 96% phenylacetylene conversion and 96% selectivity to phenylethylene in the fifth cycle under mild conditions (5 mmol phenylacetylene, 7 mg cat, 5 mL EtOH, R.T., 1 H bar)., The authors thank the financial support from the Spanish Government (RTI2018-096399-A-I00, PID2022-140111OB-I00, PID2020-113006-RB-I00, TED2021-130191B-C41, and TED2021-130191B-C44) funded by MCIN/AEI/10.13039/501100011033. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 101022507 and NextGenerationEU/PRTR). HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed at CLAESS and NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Carlos Escudero, Carlo Marini). J.M. Salas is acknowledged for experimental contributions to FTIR measurements.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Rhodium single-atom catalyst design through oxide support modulation for selective gas-phase ethylene hydroformylation

  • Farpón, Marcos G.
  • Henao, Wilson
  • Plessow, Philipp N.
  • Andrés, Eva
  • Arenal, Raúl
  • Marini, Carlo
  • Agostini, Giovanni
  • Studt, Félix
  • Prieto, Gonzalo
A frontier challenge in single-atom (SA) catalysis is the design of fully inorganic sites capable of emulating the high reaction selectivity traditionally exclusive of organometallic counterparts in homogeneous catalysis. Modulating the direct coordination environment in SA sites, via the exploitation of the oxide support's surface chemistry, stands as a powerful albeit underexplored strategy. We report that isolated Rh atoms stabilized on oxygen-defective SnO2 uniquely unite excellent TOF with essentially full selectivity in the gas-phase hydroformylation of ethylene, inhibiting the thermodynamically favored olefin hydrogenation. Density Functional Theory calculations and surface characterization suggest that substantial depletion of the catalyst surface in lattice oxygen, energetically facile on SnO2, is key to unlock a high coordination pliability at the mononuclear Rh centers, leading to an exceptional performance which is on par with that of molecular catalysts in liquid media.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

One-Pot Cooperation of Single-Atom Rh and Ru Solid Catalysts for a Selective Tandem Olefin Isomerization-Hydrosilylation Process

  • Sarma, B. B.
  • Kim, J.
  • Amsler, J.
  • Agostini, G.
  • Weidenthaler, C.
  • Pfänder, N.
  • Arenal, R.
  • Concepción, P.
  • Plessow, P.
  • Studt, F.
  • Prieto, G.
Realizing the full potential of oxide-supported single-atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one-pot combination of Ru1/CeO2 and Rh1/CeO2 SACs enables a highly selective olefin isomerization-hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double-bond migration and anti-Markovnikov a-olefin hydrosilylation, respectively. First-principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single-pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio-selectivity (>95 %) even from industrially-relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide-supported single-atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes.