Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning zirconia-supported metal catalysts for selective one-step hydrogenation of levoglucosenone

  • Mazarío, Jaime
  • Parreño Romero, M.
  • Concepción, Patricia
  • Chávez-Sifontes, M.
  • Spanevello, R.A.
  • Comba, M.B.
  • Suárez, A.G.
  • Dómine, Marcelo Eduardo
Levoglucosenone, directly produced from cellulose-containing residual biomass via pyrolysis treatments, is believed to be a promising bio-renewable platform for both fine and commodity chemicals. In this work, the possibilities given by tuneable catalysts based on Pd and Pt supported on metallic oxides to produce the desired product in the one-pot hydrogenation of levoglucosenone are evaluated. Particularly, the excellent catalytic performance of Pd/ZrO and Pt/ZrO type materials for the synthesis of dihydrolevoglucosenone (or Cyrene) and levoglucosanol, respectively, during the mild hydrogenation of levoglucosenone is demonstrated. In the Cyrene synthesis, the Pd/t-ZrO material showed the best catalytic activity compared to other Pd-supported on metallic oxides. This catalyst achieved nearly 95% yields of Cyrene by working under mild reaction conditions, with very low catalyst loadings (≈3 wt%) and using water as the solvent. On the other hand, the one-pot hydrogenation of levoglucosenone to levoglucosanol is reported for the first time with a Pt-based heterogeneous catalyst (Pt/ZrO-mix, yield ≈90%), by working at low temperatures and mild H pressures with water as the solvent. Comparison of the results attained with other Pt-supported metallic oxides let us to conclude that the metal crystal facets (specifically the 100 facet) play an important role in the hydrogenation process to give levoglucosanol selectively. In addition, the stability and re-usability of both catalysts under operational conditions are also evaluated. Finally, catalytic tests including the use of crude bio-liquids obtained from cellulose-rich biomass pyrolysis and containing ≈66 wt% of levoglucosenone are also assayed, thus demonstrating the possibility of scaling-up the process over these metals supported on zirconia catalysts., Financial support by the Spanish Government (CTQ-2015-67592, SEV-2016-0683 and PGC2018-097277-B-100) is gratefully acknowledged. R. S. thanks the CONICET financial support (CONICET-CSIC, PVCE Program, RD 4183/15). J. M. thanks MICINN (CTQ2015-67592) for the PhD fellowship. Authors also thank the Electron Microscopy Service of Universitat Politècnica de València for their support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reflux-synthesized bulk and diluted W-Nb-O mixed oxide bronzes for the valorization of short-chain oxygenates aqueous mixtures

  • Delgado Muñoz, Daniel
  • Fernández-Arroyo Naranjo, Alberto
  • Salvia, N.L.
  • Dómine, Marcelo Eduardo
  • López Nieto, José Manuel
This work reports the preparation of bulk and KIT-6-diluted W-Nb-O mixed oxide bronzes by a reflux method. The influence of the incorporation of Nb and a mesoporous silica on the physicochemical features of the catalysts is studied. The addition of Nb favors the formation of single-phase oxide bronze structure, with improved Lewis acidity; while the incorporation of KIT-6 gives rise to well-dispersed mixed metal oxide particles on the diluter. These diluted W-Nb-O catalysts present enhanced surface areas and mesopore volumes. The materials have been tested in the valorization of an aqueous model mixture (acetol/propanal/ethanol/acetic acid/water weight ratio of 5/25/10/30/30), through C-C bond formation reactions. The increase in the Lewis nature of surface acid sites stands as the key point to maximize the total organic yield during the reaction (C-C products). The best catalysts maintain their catalytic behavior after five consecutive uses., Financial support by the Spanish Government (RTI2018-099668-B-C21, PGC2018-097277-B-100, and SEV-2016-0683) is gratefully acknowledged. DD and AF-A thank the Severo Ochoa Excellence Program (SVP-2014-068669) and the “La Caixa-Severo Ochoa” Foundation, respectively, for their fellowships. NS thanks “Conselho Nacional de Desenvolvimento Científico y Tecnológico (CNPq)” in Brasil. Authors are also grateful to the Electron Microscopy Service (Universitat Politècnica de València) for facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Production of chiral alcohols from racemic mixtures by integrated heterogeneous chemoenzymatic catalysis in fixed bed continuous operation

  • Carceller, Jose Miguel
  • Mifsud, María
  • Climent Olmedo, María José
  • Iborra Chornet, Sara
  • Corma, Avelino
Valuable chiral alcohols have been obtained from racemic mixtures with an integrated heterogeneous chemoenzymatic catalyst in a two consecutive fixed catalytic bed continuous reactor system. In the first bed the racemic mixture of alcohols is oxidized to the prochiral ketone with a Zr-Beta zeolite and using acetone as the hydrogen acceptor. In the second catalytic bed the prochiral ketone is stereoselectively reduced with an alcohol dehydrogenase (ADH) immobilized on a two dimensional (2D) zeolite. In this process, the alcohol (isopropanol) formed by the reduction of acetone in the first step reduces the cofactor in the second step, and the full reaction cycle is in this way internally closed with 100% atom economy. A conversion of about 95% with ∼100% selectivity to either the (R) or the (S) alcohol has been obtained for a variety of racemic mixtures of alcohols., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through “Severo Ochoa” Excellence Programme (SEV-2016-0683) and the PGC2018-097277-B-100(MCIU/AEI/FEDER, UE) project. J. M. C. thanks to Universitat Politécnica de Valencia for a predoctoral fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of a hybrid Pd0/Pd-carbide/carbon catalyst material with high selectivity for hydrogenation reactions

  • García-Ortiz, Andrea
  • Vidal, Juan D.
  • Iborra Chornet, Sara
  • Climent Olmedo, María José
  • Cored, Jorge
  • Ruano, Daniel
  • Pérez-Dieste, Virginia
  • Concepción, Patricia
  • Corma, Avelino
We present a highly selective and active Pd carbon catalyst prepared by an easy hydrothermal synthesis method. This synthetic procedure allows the stabilization under mild conditions of interstitial carbon atoms on the surface of a Pd carbon catalyst. The so formed Pd carbide phase appears on the upper surface layers of the Pd carbon catalyst, as demonstrated by X-ray photoelectron depth profile analysis using variable synchrotron X-ray energies. The presence of carbon in the palladium carbide species modifies the electronic state of surface Pd atoms, resulting in more electron positive Pd species (Pd). This influences the adsorption of reactants and reaction intermediates during the hydrogenation of alkynes, dienes and imines, resulting in high selectivities at practically 100% conversion., Funding: The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through “Severo Ochoa” Excellence Programme (SEV-2016-0683) and the PGC2018-097277-B-100 project. The authors also thank the Microscopy Service of UPV for kind help on measurements. A. García-Ortiz thanks “Severo Ochoa” Programme (SEV-2016-0683) for a predoctoral fellowship. J. Cored thanks the Spanish Government (MINECO) for a “Severo Ochoa” grant (BES-2015-075748). D. R. thanks European Research Council project SYNCATMATCH (671093). The NAP-XPS experiments were performed at the NAPP branch of the CIRCE beamline at the ALBA Synchrotron with the collaboration of ALBA staff.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning Ca-Al-based catalysts' composition to isomerize or epimerize glucose and other sugars

  • Ventura, María
  • Cecilia, Juan Antonio
  • Rodríguez-Castellón, Enrique
  • Dómine, Marcelo Eduardo
One of the key reactions to achieve good productivity in the transformations of cellulose derived from biomass feedstocks is the isomerization of glucose to fructose, the latest being the platform molecule for obtaining other important derivatives. In this work, Ca-Al containing catalysts based on hydrotalcite-type derived materials were used to perform the selective isomerization of glucose to fructose, and the selective epimerization of glucose to mannose, using water as the solvent under mild reaction conditions. The catalysts showed high activity (conversion = 51-87%), and excellent selectivity (63-88%) towards fructose, compared with the current industrial process based on the glucose transformation via biocatalysis. It was also possible to modulate the selectivity towards fructose or mannose by tuning the amount of basic sites of the catalysts and their composition. The combination of basic and acid sites present in the Ca-Al-based catalysts plays a key role in the reaction, a fact that is discussed in the text together with other important operational parameters. The stability and recyclability of the catalysts were tested, detecting only a small activity loss after 5 consecutive runs. The synthesis of the catalysts and their characterization are also discussed since they are one of the few cases found in the literature of this kind of hydrotalcite-type material with such a high level of Ca incorporation. Some green metrics, such as E-factor, have been calculated to evaluate our system as an environmentally friendly process., Financial support by the Spanish Government (PGC2018-097277-B-I00 and SEV-2016-0683), Generalitat Valenciana (GVA, PROMETEO/2018/006), and especially the Unesco/IUPAC/PhosAgro partnership within the program “Green Chemistry for Life” (Grant #139) is gratefully acknowledged. The authors also thank the ITQ for the technical support, and the Electron Microscopy Service of Universitat Politècnica de València for instrumental facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic Processes for Biomass-Derived Platform Molecules Valorisation

  • Ventura, María
  • Marinas Murillo, Ana
  • Dómine, Marcelo Eduardo
Nowadays, biomass is an interesting raw material for chemical industry, and the valorisation of its derivatives becomes in a sustainable alternative against to the depletion of fossil sources necessary for the production of energy, fuels and chemicals. Different organic compounds, such as sugars, polyols, furanics, as well as several acids (i.e. levulinic acid, succinic acid, itaconic acid, 3-hydroxy-propionic acid, among others) can be obtained after a primary treatment of the lignocellulosic-type biomass. These bio-derived molecules can be used as “platform chemicals” for the synthesis of numerous chemical products (i.e. components and additives for fuels, solvents and paintings, new monomers for polymer industry, etc.). In this review, the possibilities of valorisation via novel catalytic processes of some of the most promising biomass(cellulose/hemicellulose)-derived intermediates and platform chemicals for obtaining both conventional and new high added-value chemicals for industry will be assessed, also including cascade-type (or “one-pot”) catalytic processes recently developed., MED acknowledges financial support by the Spanish Government (PGC2018-097277-B-I00 and SEV-2016-0683) and Generalitat Valenciana (GVA, PROMETEO/2018/006). AMA is thankful to MINECO financial support (ENE2016-81013-R (AEI/FEDER, UE) and Andalusian Government (UCO-FEDER Project CATOLIVAL, re. 1264113-R, 2018 call). MV thanks the EU H2020 for the Marie Skłodowska-Curie (GA 754382), GOT ENERGY TALENT. The content of this article does not reflect the official opinion of the European Union. Responsibility for the information and views expressed herein lies entirely with the author(s). This study was funded by MINECO (SEV-2016-0683 and ENE2016-81013-R), MICINN (PGC2018-097277-B-I00), and Marie Skłodowska-Curie (GA 754382), EU H2020.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Copper and sulphur co-doped titanium oxide nanoparticles with enhanced catalytic and photocatalytic properties

  • Ortiz-Bustos, J.
  • Gómez-Ruiz, Santiago
  • Mazarío, Jaime
  • Dómine, Marcelo Eduardo
  • Del Hierro, I
  • Pérez, Yolanda
Copper and sulphur co-doped titanium oxide nanoparticles have been prepared by the sol-gel method to develop versatile catalysts exhibiting enhanced catalytic and photocatalytic properties. Structural, morphological, chemical composition, and optical characterizations of the synthesized titanium oxide nanoparticles have been carried out in order to study the effect of incorporating copper and sulphur on the catalytic and photocatalytic activities of TiO2 nanoparticles. Optimal incorporation of copper and sulphur to the titanium dioxide nanoparticles promotes the photocatalytic degradation of ciprofloxacin in water under irradiation of UV or visible light. Complete degradation of ciprofloxacin was achieved after 120 min with the 0.4% Cu-0.5% S-TiO2 photocatalyst using UV and in 90 min applying visible light. Cu-S-TiO2 nanoparticles also exhibit high activity (94-98% conversion) and excellent recyclability (with no loss of activity after 14 runs) in selective oxidation of thioanisole using H2O2 as an oxidant. This journal is, We gratefully acknowledge financial support from the MICINN (project RTI2018-094322-B-I00 and CTQ2017-90802-REDT). M. E. D also acknowledges MICINN (PGC2018-097277-B-I00 and SEV-2016-0683) for financial support, and J. M. thanks MINECO (CTQ2015-67592) for his PhD fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemoenzymatic Synthesis of 5-Hydroxymethylfurfural (HMF)-Derived Plasticizers by Coupling HMF Reduction with Enzymatic Esterification

  • Arias, Karen S.
  • Carceller, Jose Miguel
  • Climent Olmedo, María José
  • Corma, Avelino
  • Iborra Chornet, Sara
Biobased plasticizers, as substitutes for phthalates, have been synthesized from 5-hydroxymethylfurfural (HMF) and carboxylic acids (or esters) through a chemoenzymatic cascade process that involves as its first step the reduction of 5-hydroxymethylfurfural into 2,5-bis(hydroxymethyl)furan (BHMF), followed by the esterification of BHMF with carboxylic acids (or esters) by using a supported lipase (Novozym 435). The reduction of HMF into BHMF is performed by using monodisperse metallic Co nanoparticles with a thin carbon shell (Co@C) with high activity and selectivity. After optimization of reaction conditions (temperature, hydrogen pressure, and solvent), it is possible to achieve 97 % conversion of HMF with 99 % selectivity to BHMF after 2 h reaction time. The reduction of HMF and esterification of BHMF using carboxylic acids or vinyl esters as acyl donors by lipase are optimized separately in batch and in fixed-bed continuous reactors. The coupling of two flow reactors (for reduction and subsequent esterification) working under optimized reaction conditions affords the diesters of BHMF in roughly 90 % yield with no loss of activity during 60 h of operation., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through “Severo Ochoa” Excellence Programme (SEV‐2016‐0683) and the PGC2018‐097277‐B‐100 (MCIU/AEI/FEDER, UE) project. The authors also thank the Microscopy Service of UPV for kind help with measurements. JMC thanks UPV for a predoctoral fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transforming Methyl Levulinate into Biosurfactants and Biolubricants by Chemoselective Reductive Etherification with Fatty Alcohols

  • García-Ortiz, Andrea
  • Arias, Karen S.
  • Climent Olmedo, María José
  • Corma, Avelino
  • Iborra Chornet, Sara
Biomass-derived surfactants with very good surface tension and critical micellar concentration properties were obtained by conversion of methyl levulinate into methyl 4-alkoxypentanoates through reductive etherification with aliphatic alcohols. Among different bifunctional acid/metal catalysts best results were obtained with Pd on carbon bearing acid sites. The reaction occurred through the formation of an enol ether intermediate followed by hydrogenation. Pd in high-density planes was the active hydrogenation species, and an optimum crystal size was found to be approximately 10 nm. The reductive etherification with aliphatic alcohols was extended to other aliphatic and cyclic ketones and aldehydes obtained from biomass, and excellent results were obtained on supported Pd catalysts with the reaction route and experimental conditions described in this work., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities through “Severo Ochoa” Excellence Program (SEV‐2016‐0683) and the PGC2018‐097277‐B‐100 (MCIU/AEI/FEDER, UE) project. The authors also thank the Microscopy Service of UPV for kind help on measurement. A.G.‐O. thanks “Severo Ochoa” Program (SEV‐2016‐0683) for a predoctoral fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Covalent Immobilization of Naringinase over Two-Dimensional 2D Zeolites and its Applications in a Continuous Process to Produce Citrus Flavonoids and for Debittering of Juices

  • Carceller, Jose Miguel
  • Martínez Galán, J.P.
  • Monti, Rubens
  • Bassan, J.C.
  • Filice, Marco
  • Yu, J.
  • Climent Olmedo, María José
  • Iborra Chornet, Sara
  • Corma, Avelino
The crude naringinase from Penicillium decumbens and a purified naringinase with high α-L-rhamnosidase activity could be covalently immobilized on two-dimensional zeolite ITQ-2 after surface modification with glutaraldehyde. The influence of pH and temperature on the enzyme activity (in free and immobilized forms) as well as the thermal stability were determined using the specific substrate: p-nitrophenyl-alpha-L-rhamnopyranoside (Rha-pNP). The crude and purified naringinase supported on ITQ-2 were applied in the hydrolysis of naringin, giving the flavonoids naringenin and prunin respectively with a conversion '90 % and excellent selectivity. The supported enzymes showed long term stability, being possible to perform up to 25 consecutive cycles without loss of activity, showing its high potential to produce the valuable citrus flavonoids prunin and naringenin. We have also succeeded in the application of the immobilized crude naringinase on ITQ-2 for debittering grapefruit juices in a continuous process that was maintained operating for 300 h, with excellent results., The authors acknowledge financial support from PGC2018‐097277‐B‐100 (MCIU/AEI/FEDER,UE) project and Program Severo Ochoa (SEV‐2016‐0683). Jilin agreement 111 Project (Grant No. B17020). JMC thanks to Universitat Politècnica de València for predoctoral fellowships.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MOF-Mediated Synthesis of Supported Fe-Doped Pd Nanoparticles under Mild Conditions for Magnetically Recoverable Catalysis**

  • Darawsheh, M.D.
  • Mazarío, Jaime
  • Lopes, C.W.
  • Giménez-Marqués, Mónica
  • Dómine, Marcelo Eduardo
  • Meira, D.M.
  • Martínez, Jordan
  • Mínguez Espallargas, Guillermo
  • Oña-Burgos, Pascual
Metal–organic framework (MOF)-driven synthesis is considered as a promising alternative for the development of new catalytic materials with well-designed active sites. This synthetic approach is used here to gradually transform a new bimetallic MOF, with Pd and Fe as the metal components, by the in situ generation of aniline under mild conditions. This methodology results in a compositionally homogeneous nanocomposite formed by Fe-doped Pd nanoparticles that, in turn, are supported on iron oxide-doped carbon. The nanocomposite has been fully characterized by several techniques such as IR and Raman spectroscopy, TEM, XPS, and XAS. The performance of this nanocomposite as an heterogeneous catalyst for hydrogenation of nitroarenes and nitrobenzene coupling with benzaldehyde has been evaluated, proving it to be an efficient and reusable catalyst., This work has been supported by the European Union (ERC‐2016‐CoG 724681‐S‐CAGE), by the Spanish MICINN (Structures of Excellence Severo Ochoa SEV‐2016‐0683 and María de Maeztu CEX2019‐000919‐M; projects CTQ2017‐89528‐P, CTQ2015‐67592, PGC2018‐097277‐B‐100, and RTI2018‐096399‐A‐I00 co‐financed by FEDER). We also thank the Generalitat Valenciana (PROMETEO/2018/006 and PROMETEU/2019/066). G.M.E. and P.O.‐B. thank MICINN for their “Ramón y Cajal” fellowships. M.G.‐M thanks support of a fellowship from “la Caixa” Foundation (LCF/BQ/PI19/11690022) and Generalitat Valenciana (SEJI/2020/036). J.M. thanks MICINN for his PhD fellowship (CTQ2015‐67592). The authors also thank the Electron Microscopy Service of Universitat Politècnica de València for their support, M. P. Romero for her assistance with TEM measurements and Prof. E. Rodríguez‐Castellón for discussions on the XPS spectra interpretation. This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory and was supported by the U.S. DOE under contract no. DE‐AC02‐06CH11357, and the Canadian Light Source and its funding partners.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Methyl ketones from carboxylic acids as valuable target molecules in the biorefinery

  • Marie, O.
  • Ignatchenko, A.V.
  • Renz, Michael
For the preparation of methyl ketones, cross Ketonic Decarboxylation, i.e., the formation of a ketone from two different carboxylic acids, and the reketonization, i.e., the transformation of a carboxylic acid into a ketone employing a ketone as alkyl transfer agent, may be interesting alternatives to classical pathways involving metal-organic reagents. The fine chemical 2-undecanone was chosen as model compound and ketonic decarboxylation and reketonization evaluated by Green Chemistry matrices, namely the carbon atom efficiency and the e-factor. The e-factor of the reaction of decanoic acid with acetic acid was less than five and, therewith, in the acceptable range for bulk chemicals, when valorizing acetone (e.g., as a solvent) and considering a 90% solvent recycling. The reketonization of decanoic acid with acetone provided a different main product, namely 10-nonadecanone, with a detrimental effect on atom efficiency. By means of labeling experiments it was shown that ketonic decarboxylation is significantly faster than the reketonization reaction. The transformation of acetic acid into acetone was studied by in-situ and operando IR spectroscopy. Thereby it was found that the surface was covered by acetic acid. The lack of adsorption of acetone is a clear drawback for the reketonization of carboxylic acids. To improve the reaction outcome, and therewith, its sustainability a possibility has to be found to stabilize the ketone molecules on the surface in the presence of carboxylic acids., Financial support from the Spanish Government is acknowledged (Ministry of Science, Innovation and Universities, RTC-2017-6087-5 and PGC2018-097277-B-I00). MR is grateful to the Generalitat Valenciana for a BEST-2015 fellowship and to Dilyana Mladenova, Arturo Valero Jiménez and Claudia Fernández de la Peña for their contributions to the experimental work of the catalytic reactions.