Pasar al contenido principal

VALORIZACION DE COMPUESTO OXIGENADOS PRESENTES EN FRACCIONES ACUOSAS DERIVADAS DE BIOMASA EN COMBUSTIBLES Y PRODUCTOS QUIMICOS

CTQ2015-67592-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 42
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Liquid fuels from biomass: An energy self-sustained process integrating H2 recovery and liquid refining

  • D. Catalán-Martínez
  • Domine, Marcelo Eduardo
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] In the last years the research activities on biomass valorisation (mainly residues from urban and agricultural activities) have been intensified. Biomass is an abundant resource for energy generation and its extensive utilization may make possible to fulfil the goals determined by the national and international regulations about renewable sources and greenhouse gas emissions. In this work, simulations are carried out using ASPEN PLUS for an integrated process to produce liquid fuels from biomass in a self-sustainable energetic regime (thermal and electric) and several process factors have been considered. The process initially combines a primary pyrolysis reactor associated to a (char + gases) gasification unit in order to optimize the biomass use, followed by downstream processes to enhance the quality of final liquid fuel. The factors studied were the composition of the biomass, the primary (or pyrolytic) liquid yield, the composition of the liquid fuel, as well as the amount of the oxidant and steam used in the primary char-gasifier reactor. The use of a simplified model for liquid fuel composition let us to stablish a range of operational conditions in which both thermal and electric balance of the process are favourable. In this sense, the maximum extraction of liquid fuel was found around 20-25% by working at 10-25% of O-2 (as pure oxygen or air) and 15-45% of steam in the gasifier and fulfilling self-sustainable process condition, while biomass should possess C/O weight ratios >= 1., Financial support by the Spanish Government (ENE2014-57651, CTQ2015-67592, and SEV-2016-0683 grants) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mutual Valorization of 5-Hydroxymethylfurfural and Glycerol into Valuable Diol Monomers with Solid Acid Catalysts

  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Garcia-Ortiz, Andrea
[EN] Biomass platform molecules such as glycerol and 5-hydroxymethylfurfural have been valorized into diol monomers by acetalization reaction in the presence of tridirectional large pore zeolites (HY and Beta), a laminar zeolite (ITQ-2) and a mesoporous aluminosilicate (MGM-41), and a conventional homogeneous acid catalyst (p-toluenesulfonic acid). The influence of the solvent polarity, pore structure, hydrophobic character, and acidity of the catalyst on the activity and selectivity to 5-hydroxymethylfurfural (HMF) glyceryl acetals has been studied. Results showed that, while the homogeneous catalyst mainly promotes polymerization reactions, tridirectional zeolites are more active catalysts but less selective and deactivate more rapidly than mesoporous MCM-41 and delaminated two-dimensional zeolites. ITQ-2 and MCM-41 catalysts with smaller confinement effects, easy diffusion, and adequate surface polarity provide high yield (98%) and selectivity (100%) to the target compound. These catalysts are stable and allow regeneration and reuse., Spanish MICINN Project CTQ-2015-67592-P and Program Severo Ochoa (SEV-2016-0683) are gratefully acknowledged. A.G.-O. thanks the Severo Ochoa Program for FPI fellowships.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of Ti Incorporation to Bimetallic Mesoporous Carbon in the Production of 2,5-Dimethylfuran from Biomass Derivatives

  • Ledesma, Brenda C.
  • Juárez, Juliana M.
  • Beltramone, Andrea R.
  • Domine, Marcelo Eduardo
[EN] Monometallic and bimetallic supported catalysts were developed to produce 2,5-dimethylfuran (DMF) trough hydrogenolysis of 5-(hydroxymethyl)furfural (HMF). Detailed physicochemical characterization was done to understand structure-activity correlation. Through a series of experiments and comparatives tests, the synergistic effect among Pt, Ir, and Ti incorporated in the support was investigated. Results revealed that using the titanium contained ordered mesoporous carbon, synthesized by a novel technique, high selectivity to DMF was achieved. In the case of the best catalyst PtIr-TiC, the good activity and excellent selectivity to the desired product DMF (98% yield) was related to the high hydrogenating capacity of the bimetallic sites, the acid support characteristics and the high metal nanoparticles dispersion achieved on the mesoporous titanium modified carbon support., NANOTEC, CONICET, Universidad Tecnologica Nacional, Maestro Lopez y Cruz Roja Argentina. We acknowledge the financial support provided by CONICET Argentina, PIP CONICET 11220120100218CO 2020. M.E.D thanks Spanish Government financial support (CTQ2015-67592 and PGC2018-097277-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pd supported on mixed metal oxide as an efficient catalyst for the reductive amination of bio-derived acetol to 2-methylpiperazine

  • Mazarío-Santa-Pau, Jaime
  • Raad, Zaher
  • Cerdá-Moreno, Cristina
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Domine, Marcelo Eduardo
[EN] An efficient process for synthesizing a high added-value N-heterocycle (2-methylpiperazine, 2-MP) via reductive amination of hydroxyacetone or acetol (product of the selective dehydration of glycerol) with ethylenediamine by using Pd supported catalysts under mild reaction conditions is here presented. Catalysts based on Pd nanoparticles supported on metallic oxides and mixed oxides were prepared and characterized by ICP analysis, XRD, HR-TEM, and NH3-TPD, among others. Catalytic activity comparisons of Pd-based materials (also including commercial references) were done and obtained results correlated with metal particle morphology (analyzed by CO-FTIR) and its ability to activate the C = N bond. The best results were attained with Pd/TiO2-Al2O3 and Pd/ZrO2-Al2O3, the former yielding >80% of 2-MP. The Pd/TiO2-Al2O3 catalyst successfully enables the activation of the imine group (C = N), due to a larger number of unsaturated Pd sites in its nanoparticles, while keeping a suitable acidity to effectively and selectively carry out the reductive cyclo-amination reaction even with lower catalyst loadings. This research work offers a new and sustainable catalytic route for the synthesis of organo-nitrogen compounds taking advantage of renewable raw materials (i.e. acetol) as a carbon source and using efficient Pd supported catalysts., The authors express their gratitude to the Spanish Government for the funding (MICINN: CTQ2015-67592, PGC2018-097277-B-I00 and Severo Ochoa Program: SEV-2016-0683). J. M. thanks the MICINN (CTQ2015-67592) for his PhD scholarship. Z. R. thanks the Islamic Center Association for Guidance and Higher Education for his PhD scholarship. The authors also thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support and M. Parreno-Romero for her assistance with the measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Carbon-Carbon Bond Formation and Hydrogen Production in the Ketonization of Aldehydes

  • Orozco Arboleda, Lina Marcela
  • Renz, Michael|||0000-0002-1101-9562
  • Corma Canós, Avelino|||0000-0002-2232-3527
Aldehydes possess relatively high chemical energy, which is the driving force for disproportionation reactions such as Cannizzaro and Tishchenko reactions. Generally, this energy is wasted if aldehydes are transformed into carboxylic acids with a sacrificial oxidant. Here, we describe a cascade reaction in which the surplus energy of the transformation is liberated as molecular hydrogen for the oxidation of heptanal to heptanoic acid by water, and the carboxylic acid is transformed into potentially industrially relevant symmetrical ketones by ketonic decarboxylation. The cascade reaction is catalyzed by monoclinic zirconium oxide (m-ZrO2). The reaction mechanism has been studied through cross-coupling experiments between different aldehydes and acids, and the final symmetrical ketones are formed by a reaction pathway that involves the previously formed carboxylic acids. Isotopic studies indicate that the carboxylic acid can be formed by a hydride shift from the adsorbed aldehyde on the metal oxide surface in the absence of noble metals., The authors thank MINECO (CTQ2015-67591-P, Consolider Ingenio 2010-MULTICAT and Severo Ochoa program, SEV-2012-0267) and Generalitat Valenciana (PROMETEO II/2013/011 Project) for funding this work. L.M.O. is grateful to the COLCIENCIAS institute for a Francisco-Jose-de-Caldas (512/2010) doctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polymers from biomass: one pot two-step synthesis of furilydenepropanenitrile derivatives with MIL-100(Fe) catalyst

  • Rapeyko, Anastasia|||0000-0002-8309-3702
  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Iborra Chornet, Sara|||0000-0003-1758-5095
[EN] Furilydenepropanenitrile derivatives, which are useful as monomers, have been obtained in high yields by coupling the oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-diformylfuran (DFF) and the Knoevenagel condensation of DFF with methylene active compounds in a one pot process. The oxidation step was studied using an Fe containing metal-organic framework (MIL-100(Fe), and Fe(BTC)), a Cu containing MOF (Cu3(BTC)(2)), an Fe exchanged HY zeolite and homogeneous Fe salts in the presence of 2,2,6,6-tetramethylpiperidine- 1-oxide (TEMPO) as a cocatalyst, NaNO2 as an additive and oxygen as the terminal oxidant. The results showed that the synthesized MIL-100(Fe) post treated with NH4F was the most active catalyst achieving 100% HMF conversion with 100% selectivity to DFF and can be reused with good success. Additionally, the catalytic system has been applied to the oxidation of different primary and secondary alcohols to aldehydes and ketones under mild reaction conditions with good success. The second step, the Knoevenagel condensation of the obtained DFF with malononitrile or ethyl cyanoacetate, was performed taking advantage of the basicity of the reaction medium., The Spanish MICINN Project (CTQ-2015-67592-P), Generalitat Valenciana (Prometeo Program), the Severo Ochoa Program and the EU-Japan Project NOVACAM are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical Analysis of Catalytic and Oxygen Interfacial Transfer Effects on MnO2 Deposited on Gold Electrodes

  • Doménech Carbó, Antonio
  • Sabate-Fornons, Ferran
  • Sabater Picot, Mª José
[EN] A theoretical model for obtaining thermochemical and kinetic information on oxygen interfacial transfer in metal oxides deposited on gold electrodes, based in the voltammetry of immobilized particle methodology, is presented. It is applied to MnO2 microparticulate deposits on gold in contact with aqueous NaOH solution using the voltammetric signals for the oxidation of gold to gold oxide monolayer and its subsequent desorptive reduction. Assuming reversibility, voltammetric peak potentials permit to estimate a variation of Gibbs free energy of interfacial oxygen transfer of -32 +/- 3 kj mol(-1). Analysis of peak current data based on the Sharp-Hancock formalism of solid-state kinetics was consistent with the diffusive nature of the transfer process and permitted the separation between this effect and the catalytic effect exerted by MnO2 on the electrochemical oxidation of gold., Financial support by projects CTQ2014-53736-C3-2-P and CTQ2015-67592-P, which are supported with Ministerio de Economia, Industria y Competitividad (MINECO), and Fondo Europeo de Desarrollo Regional (ERDF) funds, and CTQ2017-85317-C2-1-P supported with funds from the MINECO, ERDF, and Agencia Estatal de Investigation (AEI) are gratefully acknowledged. F.S. acknowledges a PhD fellowship (Ayuda Predoctoral FPI Severo Ochoa) from MINECO.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-Pot Synthesis of Biomass-Derived Surfactants by Reacting Hydroxymethylfurfural, Glycerol, and Fatty Alcohols on Solid Acid Catalysts

  • Garcia-Ortiz, Andrea
  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Iborra Chornet, Sara|||0000-0003-1758-5095
[EN] A new type of biomass-derived non-ionic surfactants has been obtained by reacting hydroxymethylfurfural (HMF), glycerol, and fatty alcohols. For instance, 5-(octyloxymethyl)furfural glyceryl acetal can be obtained in a one-pot process by etherification of HMF with fatty alcohols followed by acetalization with glycerol. For a successful solid catalyst, acidity and polarity have to be optimized to improve conversion, selectivity, and catalyst deactivation owing to the different adsorption characteristics of the reactant molecules. Accordingly, Beta zeolite with a high Si/Al ratio and practically free of connectivity defects showed good results when dealing with these biomass derivatives, which include a highly polar reactant such as glycerol. The scope of the reaction is good and a variety of new stable surfactant molecules can be obtained that present hydrophilic-lipophilic balance (HLB) values in the range 4.9 to 6.6, which are of interest for water in oil emulsions., The authors acknowledge the financial support from MICINN Project CTQ-2015-67592-P, and Program Severo Ochoa (SEV-2016-0683). A.G.O. thanks the Severo Ochoa Program for predoctoral fellowships.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Copper and sulphur co-doped titanium oxide nanoparticles with enhanced catalytic and photocatalytic properties

  • Ortíz-Bustos, Josefa
  • Gómez-Ruiz, Santiago
  • Mazarío-Santa-Pau, Jaime
  • del Hierro, Isabel
  • Pérez Cortés, Yolanda
  • Domine, Marcelo Eduardo
[EN] Copper and sulphur co-doped titanium oxide nanoparticles have been prepared by the sol-gel method to develop versatile catalysts exhibiting enhanced catalytic and photocatalytic properties. Structural, morphological, chemical composition, and optical characterizations of the synthesized titanium oxide nanoparticles have been carried out in order to study the effect of incorporating copper and sulphur on the catalytic and photocatalytic activities of TiO(2)nanoparticles. Optimal incorporation of copper and sulphur to the titanium dioxide nanoparticles promotes the photocatalytic degradation of ciprofloxacin in water under irradiation of UV or visible light. Complete degradation of ciprofloxacin was achieved after 120 min with the 0.4% Cu-0.5% S-TiO(2)photocatalyst using UV and in 90 min applying visible light. Cu-S-TiO(2)nanoparticles also exhibit high activity (94-98% conversion) and excellent recyclability (with no loss of activity after 14 runs) in selective oxidation of thioanisole using H(2)O(2)as an oxidant., We gratefully acknowledge financial support from the MICINN (project RTI2018-094322-B-I00 and CTQ2017-90802-REDT). M. E. D also acknowledges MICINN (PGC2018-097277-B-I00 and SEV-2016-0683) for financial support, and J. M. thanks MINECO (CTQ2015-67592) for his PhD fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tuning zirconia-supported metal catalysts for selective one-step hydrogenation of levoglucosenone

  • Mazarío-Santa-Pau, Jaime
  • Chávez-Sifontes, Marvin
  • Spanevello, Rolando A.
  • Comba, María B.
  • Suárez, Alejandra G.
  • Parreño-Romero, Miriam
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Domine, Marcelo Eduardo
[EN] Levoglucosenone, directly produced from cellulose-containing residual biomass via pyrolysis treatments, is believed to be a promising bio-renewable platform for both fine and commodity chemicals. In this work, the possibilities given by tuneable catalysts based on Pd and Pt supported on metallic oxides to produce the desired product in the one-pot hydrogenation of levoglucosenone are evaluated. Particularly, the excellent catalytic performance of Pd/ZrO2 and Pt/ZrO2 type materials for the synthesis of dihydrolevoglucosenone (or Cyrene) and levoglucosanol, respectively, during the mild hydrogenation of levoglucosenone is demonstrated. In the Cyrene synthesis, the Pd/t-ZrO2 material showed the best catalytic activity compared to other Pd-supported on metallic oxides. This catalyst achieved nearly 95% yields of Cyrene by working under mild reaction conditions, with very low catalyst loadings (¿3 wt%) and using water as the solvent. On the other hand, the one-pot hydrogenation of levoglucosenone to levoglucosanol is reported for the first time with a Pt-based heterogeneous catalyst (Pt/ZrO2-mix, yield ¿90%), by working at low temperatures and mild H2 pressures with water as the solvent. Comparison of the results attained with other Pt-supported metallic oxides let us to conclude that the metal crystal facets (specifically the 100 facet) play an important role in the hydrogenation process to give levoglucosanol selectively. In addition, the stability and re-usability of both catalysts under operational conditions are also evaluated. Finally, catalytic tests including the use of crude bio-liquids obtained from cellulose-rich biomass pyrolysis and containing ¿66 wt% of levoglucosenone are also assayed, thus demonstrating the possibility of scaling-up the process over these metals supported on zirconia catalysts., Financial support by the Spanish Government (CTQ-201567592, SEV-2016-0683 and PGC2018-097277-B-100) is gratefully acknowledged. R.S. thanks the CONICET financial support (CONICET-CSIC, PVCE Program, RD 4183/15). J.M. thanks MICINN (CTQ2015-67592) for the PhD fellowship. Authors also thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Isomerization of Glucose-to-Fructose in Water over a Continuous Flow Reactor using Ca-Al Mixed Oxide as Heterogeneous Catalyst

  • Ventura, Maria
  • Mazarío-Santa-Pau, Jaime
  • Domine, Marcelo Eduardo
[EN] This work reports the continuous isomerization of glucose to fructose in aqueous media under mild conditions using a mixed oxide hydrotalcite-derived catalyst based on Ca and Al. Different operational parameters of the continuous flow fix-bed catalytic reactor system were studied. At the optimal conditions, the Ca-Al-based catalyst achieved a very high conversion and almost quantitative selectivity towards fructose, this being one of the few successful examples of a heterogeneous catalyst capable of carrying out this reaction in a continuous process. Importantly, catalytic activity held steady during four hours on stream, and slight deactivation occurring could be practically overcome by thermal regeneration of the catalyst., Grant PGC2018-097277-B-I00 funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe", and the financial support by the Spanish Government (SEV-2016-0683) and Generalitat Valenciana (GVA, PROMETEO/2018/006) are gratefully acknowledged. Authors also thank the ITQ for the technical support, and the Electron Microscopy Service of Universitat Politecnica de Valencia for instrumental facilities. J.M. thanks the Spanish Government (CTQ-2015-67592) for his PhD fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure-reactivity relations in Cu/ZrO2 catalysed glycerol dehydration to acetol in continuous flow

  • Mazarío-Santa-Pau, Jaime
  • Jampaiah, Deshetti
  • Villasante-Iturria, Pablo
  • Wilson, Karen
  • Lee, Adam
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Domine, Marcelo Eduardo
[EN] The selective dehydration of glycerol to hydroxyacetone (acetol) was studied in a continuous flow fixed-bed reactor with CuO supported on monoclinic (m-) or tetragonal (t-) ZrO2 nanoparticles. Catalysts were characterised by ICP, N-2 physisorption, powder XRD, HR-TEM and SEM-EDS, N2O titration, and NH3- and CO2-TPD. Quasi-in situ XPS reveals the impact of zirconia phase on copper speciation, with m-ZrO2 preferentially stabilising Cu(I) species, whose presence correlates with enhanced catalytic performance. In situ FTIR of 1,2-propanediol and glycerol evidenced Cu(I) promote desorption of a CO containing intermediate. Solvent selection strongly influenced catalyst reactivity, with methanol less prone to competitive adsorption than water, and favouring the genesis of Cu(I) species. Cu/m-ZrO2 achieved 60% yield of the desired acetol at 240 degrees C, maintaining >= 50% yield over three consecutive regeneration cycles, being one of the most efficient catalysts based on earth abundant metals for continuous glycerol dehydration to acetol under the present conditions., Authors thank grants PGC2018-097277-B-I00 and PID2021-125897-OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", and the Australian Research Council for funding (DP200100204, DP200100313, LP190100849). J. M. also thanks Spanish Government (CTQ-2015-67592) for his FPI fellowship. The authors also thank J. M. Salas for his help with IR measurements, and M. Parreno Romero and the Electron Microscopy Service of Universitat Politecnica de Valencia for their support during electron microscopy analyses.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective synthesis of citrus flavonoids prunin and naringenin using heterogeneized biocatalyst on graphene oxide

  • Carceller-Carceller, Jose Miguel
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Martínez Galán, Julián Paul
  • Monti, Rubens
  • Bassan, Juliana Cristina
  • Filice, Marco
  • Yu, Jihong
[EN] Production of citrus flavonoids prunin and naringenin was performed selectively through the enzyme hydrolysis of naringin, a flavonoid glycoside abundant in grapefruit wastes. To produce the monoglycoside flavonoid, prunin, crude naringinase from Penicillium decumbens was purified by a single purification step resulting in an enzyme with high -rhamnosidase activity. Both crude and purified enzymes were covalently immobilized on graphene oxide. The activity of the immobilized enzymes at different pH levels and temperatures, and the thermal stability were determined and compared with those exhibited by the free naringinases using specific substrates: p-nitrophenyl--d-glucoside (Glc-pNP) and p-nitrophenyl-alpha-l-rhamnopyranoside (Rha-pNP). The crude and purified naringinase supported on GO were tested in the hydrolysis of naringin, giving naringenin and prunin, respectively, in excellent yields. The supported enzymes can be reused many times without loss of activity. The naringinase stabilized on GO has high potential to produce the valuable citrus flavonoids prunin and naringenin., Authors acknowledge the financial support from MICINN Project CTQ-2015-67592-P and Program Severo Ochoa (SEV-2016-0683). JVC thanks Universitat Politecnica de Valencia for predoctoral fellowships. JY and AC thank the support from the National Natural Science Foundation of China (Grant No. 21320102001) and the 111 Project (Grant No. B17020).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bimetallic platinum/iridium modified mesoporous catalysts applied in the hydrogenation of HMF

  • Brenda Ledesma
  • Juliana M. Juárez
  • Mazarío-Santa-Pau, Jaime
  • Andrea Beltramone
  • Domine, Marcelo Eduardo
[EN] Catalytic transformation of 5-hydroxymethylfurfural (HMF) to produce 2,5-dimethylfuran (2,5-DMF) was studied over bimetallic (PtIr) and monometallic (Pt) catalysts supported on CMK-3 and SBA-15 mesoporous materials. The optimum temperature and hydrogen pressure for the maximum production of 2,5-DMF were 120 degrees C and 15 atm, respectively. Increases in temperature and pressure decreased the selectivity to 2,5-DMF. The catalysts were broadly characterized by different techniques, such as XRD, N-2-isotherms, XPS, TPR, TEM and NH3-TPD. It was found that the metallic particles were well reduced and highly dispersed on the surface of supports having large surface area and narrow pore size distribution. The PtIr alloy species catalytic sites were very active and selective towards the formation of the desired 2,5-DMF. PtIr-CMK-3 catalyst showed an excellent activity, selectivity and stability to be applied in this process., NANOTEC, CONICET, Universidad Tecnologica Nacional, Maestro Lopez y Cruz Roja Argentina. We acknowledge the financial support provided by CONICET Argentina, PIP CONICET11220120100218CO. 2014-2018. J.M. and M.E.D thanks Spanish Government financial support (CTQ2015-67592 and PGC2018-097277-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of nano-SSZ-13 and its application in the reaction of methanol to olefins

  • Li, Zhibin
  • Yu, Jihong
  • Navarro Villalba, Mª Teresa|||0000-0001-5012-8414
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Nanosized SSZ-13 has been obtained from a one-pot synthesis procedure with the addition of CTAB to the synthesis precursor solution. Nano-SSZ-13 zeolite showed high intracrystalline mesoporosity and compared to standard SSZ-13 presented a much longer lifetime and higher conversion capacity for the reaction of methanol to olefins. The improved properties were attributed to a more efficient utilization of micropores by easier diffusion of reactants and products and slower deactivation by coke. A higher C2/C3 ratio was found for nano-SSZ-13, pointing to a lower deactivation of the aromatics cycle of the hydrocarbon pool., Financial support by the Spanish Government-MINECO through “Severo Ochoa” (SEV 2012-0267), CTQ2015-67592-P, CTQ2015-70126-R, CTQ2015-68951-C3-1-R, MAT2015-71842-P, by the European Union ERC-AdG-2014-671093-SynCatMatch and by the Generalitat Valenciana PROMETEOII/2013/011 is acknowledged. Z. Li acknowledges China Scholarship Council (CSC) for a fellowship. J. Yu thanks the Major International Joint Research Project of China for financial support (Grant No. 21320102001).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Two dimensional ITQ-2 zeolite for biomass transformation: Synthesis of alkyl 5-benzyl-2-furoates as intermediates for fine chemicals

  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Iborra Chornet, Sara|||0000-0003-1758-5095
[EN] A new catalytic process to produce alkyl 5-benzyl-2-furoates has been performed through two step process that involves: a) selective oxidative esterification of 5-hydroxymethylfurfural (HMF) to 5-hydroxymethyl furoic acid methyl ester (HMFE) using Au/TiO2 as catalyst and oxygen as oxidant and b) alkylation of benzene derivatives with HMFE using zeolites as acid catalysts. The alkylation process has been carried out using large pore tridimensional zeolites such as Beta and USY, a mesoporous aluminosilicate (MCM-41), and a 2D delaminated ITQ-2 zeolite. The results showed that ITQ-2 zeolite which combines an easy product diffusion and adequate acitidy was the most active and selective catalyst to produce alkyl 5-benzyl-2-furoates. Finally, we have presented a simple protocol to prepare 5-(4-fluorobenzyl)-2-furyl methyl ketone, a key intermediate in the synthesis of S-1360, an antiviral for the treatment of AIDS, in good yield through a more sustainable method that the existing ones, starting from biomass platform molecules., Spanish MICINN Project CTQ:2015-67592-P, Generalitat Valenciana (Prometeo program) and Program Severo Ochoa are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of cocrystallized USY/ZSM-5 zeolites from kaolin and its use as fluid catalytic cracking catalysts

  • Ghrib, Y.
  • Frini-Srasra, N.
  • Srasra, E.
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] A series of samples of cocrystallized USY/ZSM-5 zeolites were synthesized from kaolin and silica following a sequential two-step procedure with varying content of ZSM-5 (5-25 wt%). The presence of the ZSM-5 phases was confirmed by XRD and Si-29-NMR. The samples were stabilized by steaming and tested as FCC catalysts in the cracking of vacuum gasoil. The results obtained show that effectiveness of ZSM-5 as a propylene booster is enhanced when zeolites USY and ZSM-5 were synthesized in the same kaolin material, instead of using merely the physical mixtures of the two zeolites. This enhancement is attributed to the higher ability of ZSM-5 to crack larger olefins and suppress hydrogen-transfer to the gasoline fraction when the zeolites are grown together., This work has been supported by the Spanish Government MINECO through "Severo Ochoa" SEV-2016-0683, CTQ2015-67592-P and CTQ2015-68951-C3-1-R, by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Fundacion Ramon Areces through a research contract of the "Life and Materials Science" program. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemoselective Reductive Heterocyclization by Controlling the Binomial Architecture of Metal Particles and Acid-Base Properties of the Support

  • Martí Montaner, Laura
  • Sánchez, L.
  • Romanelli, G.
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] 2,¿1-¿Benzisoxazoles were produced by reductive heterocyclization of 2-¿nitroacylarenes using supported Pt nanoparticles. The reaction involves a cascade process in which the first step is the redn. of the nitro group into hydroxylamine which subsequently cycles to 2,¿1-¿benzisoxazole through the nucleophilic attack to the carbonyl group in 2-¿position. The reaction was performed on Pt¿/C, Pt¿/TiO2 and Pt¿/MgO using hydrogen as reducing agent under mild reaction conditions. Pt¿/MgO was the most active and selective catalyst. The study of the influence of the crystal size of the metal on the activity and selectivity, combined with the reaction mechanism by in situ FTIR spectroscopy of the adsorbed reactant, showed that max. activity and selectivity to the target compd. can be achieved by controlling the architecture of metal particles and acid-¿base properties of the support. The effect of the temp. on the selectivity, the stability of Pt¿/MgO catalyst, and the scope of the reaction were studied. Finally, the reductive cyclization using different metals (Pd and Au) supported on MgO was also performed., Spanish MICINN Project (CTQ-2015-67592-13), Generalitat Valenciana (Prometeo Program), and Severo Ochoa Program are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemicals from Biomass: Synthesis of biologically active furanochalcones by Claisen-Schmidt condensation of biomass-derived 5-hydroxymethylfurfural (HMF) with acetophenones

  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Iborra Chornet, Sara|||0000-0003-1758-5095
Furanochalcones have been synthesized trough the Claisen-Schmidt condensation of acetophenones and 5-hydroxymethylfurfural (HMF) using different solid base catalysts such as MgO, Al/Mg mixed oxide (HTc) with Lewis basic sites, and a hydrated Al/Mg mixed oxide (HTr) with Bronsted basic sites. The three catalysts provide high selectivity in absence of solvent or in the presence of polar solvents such as ethanol or acetonitrile, however catalysts become rapidly deactivated due to the strong adsorption of HMF and the furanochalcone obtained on the catalyst surface. A further increase in solvent polarity by using a mixture ethanol-water allows obtaining high conversion and high selectivity to furanochalcone using HTc and HTr as catalysts. However, MgO becomes rapidly deactivated which was mainly attributed to structural changes on MgO that is in situ rehydrated into Mg(OH)2 with low activity for aldol condensations. When the reaction was performed using the homogeneous NaOH catalyst, it was found that their activity is higher than that of the solid catalyst, but the selectivity of the later is clearly better. The results indicate that the active phase of the Al/Mg mixed oxide (HTc) in the ethanol-water medium corresponds to a partially restored hydrotalcite with basic hydroxyl groups. The HTc sample could be applied to the synthesis of a variety of furanochalcones with excellent success, while the catalyst could be reused several reaction cycles without loss of activity., Financial support by Consolider-Ingenio 2010 (Project MULTICAT), Spanish MICINN Project (CTQ-2015-67592-P), Generalitat Valenciana (Prometeo program) and Program Severo Ochoa are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-Pot Selective Catalytic Synthesis of Pyrrolidone Derivatives from Ethyl Levulinate and Nitro Compounds

  • Vidal, Juan D|||0000-0002-6862-6443
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Iborra Chornet, Sara|||0000-0003-1758-5095
[EN] N-substituted 5-methyl-2-pyrrolidones were prepared in a one-pot process starting from ethyl levulinate and nitro compounds in the presence of a nanosized Pt-based catalyst. Pt supported on TiO2 nanotubes (Pt/TiO2-NT) catalyzed the synthesis of N-substituted 5-methyl-2-pyrrolidones through a cascade process involving the reduction of nitro compounds, formation of the intermediary imine, hydrogenation, and subsequent cyclization. A bifunctional metal acid system was a suitable catalyst for the process. Pt supported on TiO2 showed lower catalytic activity than Pt/TiO2-NT owing to the strong adsorption of nitro compounds during the first reaction step that poisoned the acidic sites and strongly decreased the rate of amination and cyclization. However, Pt/TiO2-NT with milder acid sites was less affected by the adsorption of nitro compounds and the full cascade process could proceed. The results indicate that the prepared Pt/TiO2-NT is a chemoselective and reusable catalyst that can be applied to the synthesis of a variety of N-substituted 5-methyl-2-pyrrolidones starting from nitro compounds with excellent yields in absence of an additional organic solvent under mild reaction conditions., Financial support by Consolider-Ingenio 2010 (Project Multicat), Spanish MICINN Project (CTQ-2015-67592-P), Generalitat Valenciana (Prometeo Program) and Program Severo Ochoa is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transformation of cellulose into non-ionic surfactants in a one pot catalytic process

  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Martínez Silvestre, Sergio
Alkyl glucosides surfactants have been synthesized by a cascade process which involves the methanolysis of cellulose into methyl glucosides followed by the transacetalization with n-octanol. The first step was carried out using methanol as solvent and acid catalysts (such as inorganic acids, heteropolyacids, ion-exchange resins or modified carbon materials). Subsequently long chain alkyl glucosides can be obtained in a second step by transacetalization which involves the reaction of methyl glucosides with a fatty alcohol using the same acid catalyst. The overall process was performed under mild conditions. Amorphous sulfonated carbon catalyst achieved the best results for the complete conversion of cellulose in methanol at 200 οC with yields higher than 80 % of methyl α,β-glucopyranosides. Moreover, this material containing -SO3H groups is optimal to perform the second step obtaining octyl and decyl glucosides in yields higher than 73 % at 120 οC. In addition, catalyst reusability has been tested showing that sulfonated carbon catalyst (C-SO3H) can be reused with only a slightly decrease of its activity after four consecutive cycles., Financial support by Consolider-Ingenio 2010 (Project Multicat), Spanish MICINN Project (CTQ-2015-67592-P), Generalitat Valenciana (Prometeo Program) and Program Severo Ochoa is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemicals from Biomass: Selective Synthesis of N-Substituted Furfuryl Amines by the One-Pot Direct Reductive Amination of Furanic Aldehydes

  • Garcia-Ortiz, Andrea
  • Vidal, Juan D|||0000-0002-6862-6443
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Iborra Chornet, Sara|||0000-0003-1758-5095
[EN] N-substituted furfuryl amines are an important class of compounds due to their pharmaceutical activities that can be produced by reductive amination of furfuraldehydes derived from biomass. With supported Pd nanoparticles it is possible to obtain high activities and selectivities for the production of secondary amines. CO adsorption monitored by IR shows the importance of the Pd crystal size and crystal face on catalyst activity and selectivity. When using Pd on carbon the amount of unsaturated Pd sites is very much enhanced with the corresponding increase in selectivity. The role of carbon deposition on metal terraces on catalytic selectivity is discussed. The optimized catalyst has been successfully applied in the reductive amination of 5-hydroxymethylfurfural with different amines and ammonia as well as in the one-pot reductive amination starting from nitrobenzene instead of aniline, giving the different N-substituted-5-(hydroxymethyl)-2-furfuryl amines with excellent activity and selectivity., Spanish MICINN Project (CTQ-2015-67592-P) and Severo Ochoa Program (SEV-2016-0683) are gratefully acknowledged. AGO thanks Severo Ochoa Program for predoctoral fellowships.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MOF-Mediated Synthesis of Supported Fe-Doped Pd Nanoparticles under Mild Conditions for Magnetically Recoverable Catalysis

  • Darawsheh, Mohanad D.
  • Mazarío-Santa-Pau, Jaime
  • Lopes, Christian W.
  • Gimenez-Marques, Monica
  • Meira, Debora M.
  • Martínez, Jordan Santiago
  • Minguez Espallargas, Guillermo
  • Domine, Marcelo Eduardo
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Metal-organic framework (MOF)-driven synthesis is considered as a promising alternative for the development of new catalytic materials with well-designed active sites. This synthetic approach is used here to gradually transform a new bimetallic MOF, with Pd and Fe as the metal components, by the in situ generation of aniline under mild conditions. This methodology results in a compositionally homogeneous nanocomposite formed by Fe-doped Pd nanoparticles that, in turn, are supported on iron oxide-doped carbon. The nanocomposite has been fully characterized by several techniques such as IR and Raman spectroscopy, TEM, XPS, and XAS. The performance of this nanocomposite as an heterogeneous catalyst for hydrogenation of nitroarenes and nitrobenzene coupling with benzaldehyde has been evaluated, proving it to be an efficient and reusable catalyst., This work has been supported by the European Union (ERC2016-CoG 724681-S-CAGE), by the Spanish MICINN (Structures of Excellence Severo Ochoa SEV-2016-0683 and Maria de Maeztu CEX2019-000919-M; projects CTQ2017-89528-P, CTQ2015-67592, PGC2018-097277-B-100, and RTI2018-096399A-I00 co-financed by FEDER). We also thank the Generalitat Valenciana (PROMETEO/2018/006 and PROMETEU/2019/066). G.M.E. and P.O.-B. thank MICINN for their "Ramon y Cajal" fellowships. M.G.-M thanks support of a fellowship from "la Caixa" Foundation (LCF/BQ/PI19/11690022) and Generalitat Valenciana (SEJI/2020/036). J.M. thanks MICINN for his PhD fellowship (CTQ2015-67592). The authors also thank the Electron Microscopy Service of Universitat Politicnica de Val~ncia for their support, M. P. Romero for her assistance with TEM measurements and Prof. E. Rodr~guez-Castellin for discussions on the XPS spectra interpretation. This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory and was supported by the U.S. DOE under contract no. DE-AC02-06CH11357, and the Canadian Light Source and its funding partners.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Upgrading of oxygenated compounds present in aqueous biomass-derived feedstocks over NbOx-based catalysts

  • Fernandez-Arroyo-Naranjo, Alberto
  • Domine, Marcelo Eduardo
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Delgado-Muñoz, Daniel
[EN] The influence of synthesis and post-synthesis procedures of different niobium oxides on their catalytic performance in the aqueous phase condensation of oxygenated compounds is studied. Hydrothermally synthesized niobium oxide with a pseudo-crystalline structure shows enhanced acid properties, surface area and consequently better catalytic activity than Nb2O5 prepared by other synthesis methods. The optimized NbOx-based catalyst also demonstrates higher stability after several reuses compared to the Ce-Zr mixed oxide reference catalyst., Financial support by the Spanish Government (CTQ-2015-67592, CTQ-2015-68951-C3-1, and SEV-2012-0267) is gratefully acknowledged. A. F.-A. and D. D. thank the "La Caixa-Severo Ochoa" Foundation and the Severo Ochoa Excellence Program (SVP-2014-068669), respectively, for their fellowships. Authors also thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly dispersed copper oxide on silica: Towards an efficient catalyst for continuous glycerol dehydration to acetol

  • Mazarío-Santa-Pau, Jaime
  • Cecilia, Juan A.
  • Rodríguez-Castellón, Enrique
  • Domine, Marcelo Eduardo
[EN] In most current processes aimed at producing biodiesel glycerol is still a co-product, and its valorisation is essential for the biorefinery. This work relies on previous results showing the dependence of the selective dehydration of glycerol to acetol (hydroxyacetone) on achieving a moderate acidity and the redox functionality of copper to complete the chemical process. In this sense, this reaction was studied using CuO supported on silica. Different silicas and copper incorporation methodologies were investigated to develop the best CuO/SiO2 material. Interestingly, these CuO-based materials developed acidity and became more active when increasing the copper oxide dispersion, thereby going from poorly to intensely effective to dehydrate glycerol selectively to acetol. Catalysts were characterised by different techniques (i.e., ICP, N2 adsorption, XRD, TPR, HR-TEM, etc.) to explain the differences observed in catalytic activity and acetol yield based on their physicochemical properties., Financial support by Spanish Government (CTQ-2015-67592, PGC2018-097277-B-I00 and SEV-2016-0683) is gratefully acknowl-edged. J.M. thanks Spanish Government (CTQ-2015-67592) for the Ph.D. fellowship. Authors also thank Miriam Parreno Romero and the Electron Microscopy Service of Universitat Polite`cnica de València for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Continuous catalytic process for the selective dehydration of glycerol over Cu-based mixed oxide

  • Mazarío-Santa-Pau, Jaime
  • Ventura, María
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Domine, Marcelo Eduardo
[EN] The selective dehydration of glycerol to hydroxyacetone (acetol) was studied with Cu-based mixed oxides derived from hydrotalcite as catalysts in a continuous flow fix-bed reactor. Catalysts were prepared by co-precipitation and characterized by ICP, N-2 adsorption, XRD, NH3-TPD, CO2-TPD, TPR and TEM. Different parameters were investigated to develop the most appropriate material as well as to determine the function of every metallic species. The optimized Cu-Mg-AlOx offered approximate to 60% acetol selectivity at >90% glycerol conversion (approximate to 80% liquid yield, up to TOS = 9 h). The catalyst could be regenerated by calcination, achieving full activity recovery after five re-cycles. "In-situ" FTIR and XPS measurements evidenced that the presence of Cu, specially the most active Cu1+ species, was essential to carry out the dehydration to acetol with high reaction rates, and to form the preferred intermediate (with C=O group); although a minor contribution from Cu-0 and Cu2+ species could not be discarded., Financial support by Spanish Government (CTQ-2015-67592, PGC2018-097277-B-100 and SEV-2016-0683) and PhosAgro/UNESCO/IUPAC Partnership (Proj. 139) is gratefully acknowledged. J.M. also thanks Spanish Government (CTQ-2015-67592) for his FPI fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

W-Nb-O oxides with tunable acid properties as efficient catalysts for the transformation of biomass-derived oxygenates in aqueous systems

  • Delgado-Muñoz, Daniel
  • García-González, Ester
  • Fernandez-Arroyo-Naranjo, Alberto
  • Domine, Marcelo Eduardo
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] W-Nb-O oxide bronzes, prepared hydrothermally, have been characterized and studied as catalysts for both the gas-phase dehydration of glycerol and the liquid-phase selective condensation of light oxygenates derived from primary treatments of biomass (a mixture containing acetic acid, ethanol, propanal, hydroxyacetone and water). By controlling the nominal composition of the catalysts, it is possible to tune their textural and acid properties (concentration and nature of acid sites) to selectively produce acrolein from glycerol or C-5-C-10 hydrocarbons (with low O contents and with high yields) from light oxygenates. Interestingly, these catalysts are stable when working in gas phase reactions and they are re-usable, with high resistance to leaching, when working in aqueous media., Financial support by the Spanish Government (CTQ-2015-68951-C3-1, CTQ-2015-67592, MAT2016-78362-C4-4-R and SEV-2016-0683) and Generalitat Valenciana (GVA, PROMETEO/2018/006) is gratefully acknowledged. A. F.-A. and D. D. thank the "La Caixa-Severo Ochoa" Foundation and Severo Ochoa Excellence Program (SVP-2016-0683), respectively, for their fellowships. The authors thank the ICTS Centro Nacional de Microscopia Electronica (UCM) for instrumental facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of nano-SSZ-13 and its application in the reaction of methanol to olefins

  • Li, Zhibin
  • Navarro, María Teresa
  • Martínez Triguero, Joaquín
  • Yu, Jihong
  • Corma, Avelino
Nanosized SSZ-13 has been obtained from a one-pot synthesis procedure with the addition of CTAB to the synthesis precursor solution. Nano-SSZ-13 zeolite showed high intracrystalline mesoporosity and compared to standard SSZ-13 presented a much longer lifetime and higher conversion capacity for the reaction of methanol to olefins. The improved properties were attributed to a more efficient utilization of micropores by easier diffusion of reactants and products and slower deactivation by coke. A higher C2/C3 ratio was found for nano-SSZ-13, pointing to a lower deactivation of the aromatics cycle of the hydrocarbon pool., Financial support by the Spanish Government-MINECO through “Severo Ochoa” (SEV 2012-0267), CTQ2015-67592-P, CTQ2015-70126-R, CTQ2015-68951-C3-1-R, MAT2015-71842-P, by the European Union ERC-AdG-2014-671093-SynCatMatch and by the Generalitat Valenciana PROMETEOII/2013/011 is acknowledged. Z. Li acknowledges China Scholarship Council (CSC) for a fellowship. J. Yu thanks the Major International Joint Research Project of China for financial support (Grant No. 21320102001)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of cocrystallized USY/ZSM-5 zeolites from kaolin and its use as fluid catalytic cracking catalysts

  • Ghrib, Y.
  • Frini-Srasra, N.
  • Srasra, E.
  • Martínez Triguero, Joaquín
  • Corma, Avelino
A series of samples of cocrystallized USY/ZSM-5 zeolites were synthesized from kaolin and silica following a sequential two-step procedure with varying content of ZSM-5 (5-25 wt%). The presence of the ZSM-5 phases was confirmed by XRD and Si-NMR. The samples were stabilized by steaming and tested as FCC catalysts in the cracking of vacuum gasoil. The results obtained show that effectiveness of ZSM-5 as a propylene booster is enhanced when zeolites USY and ZSM-5 were synthesized in the same kaolin material, instead of using merely the physical mixtures of the two zeolites. This enhancement is attributed to the higher ability of ZSM-5 to crack larger olefins and suppress hydrogen-transfer to the gasoline fraction when the zeolites are grown together., This work has been supported by the Spanish Government-MINECO through “Severo Ochoa” SEV-2016-0683, CTQ2015-67592-P and CTQ2015-68951-C3-1-R, by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Fundación Ramón Areces through a research contract of the “Life and Materials Science” program. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning zirconia-supported metal catalysts for selective one-step hydrogenation of levoglucosenone

  • Mazarío, Jaime
  • Parreño Romero, M.
  • Concepción, Patricia
  • Chávez-Sifontes, M.
  • Spanevello, R.A.
  • Comba, M.B.
  • Suárez, A.G.
  • Dómine, Marcelo Eduardo
Levoglucosenone, directly produced from cellulose-containing residual biomass via pyrolysis treatments, is believed to be a promising bio-renewable platform for both fine and commodity chemicals. In this work, the possibilities given by tuneable catalysts based on Pd and Pt supported on metallic oxides to produce the desired product in the one-pot hydrogenation of levoglucosenone are evaluated. Particularly, the excellent catalytic performance of Pd/ZrO and Pt/ZrO type materials for the synthesis of dihydrolevoglucosenone (or Cyrene) and levoglucosanol, respectively, during the mild hydrogenation of levoglucosenone is demonstrated. In the Cyrene synthesis, the Pd/t-ZrO material showed the best catalytic activity compared to other Pd-supported on metallic oxides. This catalyst achieved nearly 95% yields of Cyrene by working under mild reaction conditions, with very low catalyst loadings (≈3 wt%) and using water as the solvent. On the other hand, the one-pot hydrogenation of levoglucosenone to levoglucosanol is reported for the first time with a Pt-based heterogeneous catalyst (Pt/ZrO-mix, yield ≈90%), by working at low temperatures and mild H pressures with water as the solvent. Comparison of the results attained with other Pt-supported metallic oxides let us to conclude that the metal crystal facets (specifically the 100 facet) play an important role in the hydrogenation process to give levoglucosanol selectively. In addition, the stability and re-usability of both catalysts under operational conditions are also evaluated. Finally, catalytic tests including the use of crude bio-liquids obtained from cellulose-rich biomass pyrolysis and containing ≈66 wt% of levoglucosenone are also assayed, thus demonstrating the possibility of scaling-up the process over these metals supported on zirconia catalysts., Financial support by the Spanish Government (CTQ-2015-67592, SEV-2016-0683 and PGC2018-097277-B-100) is gratefully acknowledged. R. S. thanks the CONICET financial support (CONICET-CSIC, PVCE Program, RD 4183/15). J. M. thanks MICINN (CTQ2015-67592) for the PhD fellowship. Authors also thank the Electron Microscopy Service of Universitat Politècnica de València for their support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemicals from Biomass: Selective Synthesis of N-Substituted Furfuryl Amines by the One-Pot Direct Reductive Amination of Furanic Aldehydes

  • García-Ortiz, Andrea
  • Vidal, Juan D.
  • Climent Olmedo, María José
  • Concepción, Patricia
  • Corma, Avelino
  • Iborra Chornet, Sara
N-substituted furfuryl amines are an important class of compounds due to their pharmaceutical activities that can be produced by reductive amination of furfuraldehydes derived from biomass. With supported Pd nanoparticles it is possible to obtain high activities and selectivities for the production of secondary amines. CO adsorption monitored by IR shows the importance of the Pd crystal size and crystal face on catalyst activity and selectivity. When using Pd on carbon the amount of unsaturated Pd sites is very much enhanced with the corresponding increase in selectivity. The role of carbon deposition on metal terraces on catalytic selectivity is discussed. The optimized catalyst has been successfully applied in the reductive amination of 5-hydroxymethylfurfural with different amines and ammonia as well as in the one-pot reductive amination starting from nitrobenzene instead of aniline, giving the different N-substituted-5-(hydroxymethyl)-2-furfuryl amines with excellent activity and selectivity., Spanish MICINN Project (CTQ-2015-67592-P) and Severo Ochoa Program (SEV-2016-0683) are gratefully acknowledged. AGO thanks Severo Ochoa Program for predoctoral fellowships.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

W-Nb-O oxides with tunable acid properties as efficient catalysts for the transformation of biomass-derived oxygenates in aqueous systems

  • Delgado Muñoz, Daniel
  • Fernández-Arroyo Naranjo, Alberto
  • Dómine, Marcelo Eduardo
  • García-González, Ester
  • López Nieto, José Manuel
W-Nb-O oxide bronzes, prepared hydrothermally, have been characterized and studied as catalysts for both the gas-phase dehydration of glycerol and the liquid-phase selective condensation of light oxygenates derived from primary treatments of biomass (a mixture containing acetic acid, ethanol, propanal, hydroxyacetone and water). By controlling the nominal composition of the catalysts, it is possible to tune their textural and acid properties (concentration and nature of acid sites) to selectively produce acrolein from glycerol or C-C hydrocarbons (with low O contents and with high yields) from light oxygenates. Interestingly, these catalysts are stable when working in gas phase reactions and they are re-usable, with high resistance to leaching, when working in aqueous media., Financial support by the Spanish Government (CTQ-2015- 68951-C3-1, CTQ-2015-67592, MAT2016-78362-C4-4-R and SEV2016-0683) and Generalitat Valenciana (GVA, PROMETEO/ 2018/006) is gratefully acknowledged. A. F.-A. and D. D. thank the “La Caixa-Severo Ochoa” Foundation and Severo Ochoa Excellence Program (SVP-2016-0683), respectively, for their fellowships. The authors thank the ICTS Centro Nacional de Microscopia Electrónica (UCM) for instrumental facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic Processes For Lignin Valorization into Fuels and Chemicals (Aromatics)

  • Ventura, María
  • Dómine, Marcelo Eduardo
  • Chávez-Sifontes, M.
Valorization of lignocellulosic biomass becomes a sustainable alternative against the constant depletion and environmental problems of fossil sources necessary for the production of chemicals and fuels. In this context, a wide range of renewable raw materials can be obtained from lignocellulosic biomass in both polymeric (i.e. cellulose, starch, lignin) and monomeric (i.e. sugars, polyols, phenols) forms. Lignin and its derivatives are interesting platform chemicals for industry, although mainly due to its refractory characteristics its use has been less considered compared to other biomass fractions. To take advantage of the potentialities of lignin, it is necessary to isolate it from the cellulose/ hemicellulosic fraction, and then apply depolymerization processes; the overcoming of technical limitations being a current issue of growing interest for many research groups. In this review, significant data related to the structural characteristics of different types of commercial lignins are presented, also including extraction and isolation processes from biomass, and industrial feedstocks obtained as residues from paper industry under different treatments. The review mainly focuses on the different depolymerization processes (hydrolysis, hydrogenolysis, hydrodeoxygenation, pyrolysis) up to now developed and investigated analyzing the different hydrocarbons and aromatic derivatives obtained in each case, as well as the interesting reactions some of them may undergo. Special emphasis is done on the development of new catalysts and catalytic processes for the efficient production of fuels and chemicals from lignin. The possibilities of applications for lignin and its derivatives in new industrial processes and their integration into the biorefinery of the future are also assessed., Financial support by Spanish Government (CTQ-2015-67592, CTQ2016-81848-REDT, and SEV-2016-0683) and by PhosAgro/UNESCO/IUPAC Partnership (Proj. 139) is gratefully acknowledged. M.C-S. thanks ITQ for this post-doctoral stay support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Continuous catalytic process for the selective dehydration of glycerol over Cu-based mixed oxide

  • Mazarío, Jaime
  • Concepción, Patricia
  • Ventura, María
  • Dómine, Marcelo Eduardo
The selective dehydration of glycerol to hydroxyacetone (acetol) was studied with Cu-based mixed oxides derived from hydrotalcite as catalysts in a continuous flow fix-bed reactor. Catalysts were prepared by co-precipitation and characterized by ICP, N adsorption, XRD, NH-TPD, CO-TPD, TPR and TEM. Different parameters were investigated to develop the most appropriate material as well as to determine the function of every metallic species. The optimized Cu-Mg-AlO offered ≈60% acetol selectivity at >90% glycerol conversion (≈80% liquid yield, up to TOS = 9 h). The catalyst could be regenerated by calcination, achieving full activity recovery after five re-cycles. “In-situ” FTIR and XPS measurements evidenced that the presence of Cu, specially the most active Cu species, was essential to carry out the dehydration to acetol with high reaction rates, and to form the preferred intermediate (with C[dbnd]O group); although a minor contribution from Cu and Cu species could not be discarded., Financial support by Spanish Government (CTQ-2015-67592, PGC2018-097277-B-100 and SEV-2016-0683) and PhosAgro/UNESCO/IUPAC Partnership (Proj. 139) is gratefully acknowledged. J.M. also thanks Spanish Government (CTQ-2015-67592) for his FPI fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MOF-Mediated Synthesis of Supported Fe-Doped Pd Nanoparticles under Mild Conditions for Magnetically Recoverable Catalysis**

  • Darawsheh, M.D.
  • Mazarío, Jaime
  • Lopes, C.W.
  • Giménez-Marqués, Mónica
  • Dómine, Marcelo Eduardo
  • Meira, D.M.
  • Martínez, Jordan
  • Mínguez Espallargas, Guillermo
  • Oña-Burgos, Pascual
Metal–organic framework (MOF)-driven synthesis is considered as a promising alternative for the development of new catalytic materials with well-designed active sites. This synthetic approach is used here to gradually transform a new bimetallic MOF, with Pd and Fe as the metal components, by the in situ generation of aniline under mild conditions. This methodology results in a compositionally homogeneous nanocomposite formed by Fe-doped Pd nanoparticles that, in turn, are supported on iron oxide-doped carbon. The nanocomposite has been fully characterized by several techniques such as IR and Raman spectroscopy, TEM, XPS, and XAS. The performance of this nanocomposite as an heterogeneous catalyst for hydrogenation of nitroarenes and nitrobenzene coupling with benzaldehyde has been evaluated, proving it to be an efficient and reusable catalyst., This work has been supported by the European Union (ERC‐2016‐CoG 724681‐S‐CAGE), by the Spanish MICINN (Structures of Excellence Severo Ochoa SEV‐2016‐0683 and María de Maeztu CEX2019‐000919‐M; projects CTQ2017‐89528‐P, CTQ2015‐67592, PGC2018‐097277‐B‐100, and RTI2018‐096399‐A‐I00 co‐financed by FEDER). We also thank the Generalitat Valenciana (PROMETEO/2018/006 and PROMETEU/2019/066). G.M.E. and P.O.‐B. thank MICINN for their “Ramón y Cajal” fellowships. M.G.‐M thanks support of a fellowship from “la Caixa” Foundation (LCF/BQ/PI19/11690022) and Generalitat Valenciana (SEJI/2020/036). J.M. thanks MICINN for his PhD fellowship (CTQ2015‐67592). The authors also thank the Electron Microscopy Service of Universitat Politècnica de València for their support, M. P. Romero for her assistance with TEM measurements and Prof. E. Rodríguez‐Castellón for discussions on the XPS spectra interpretation. This research used resources of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory and was supported by the U.S. DOE under contract no. DE‐AC02‐06CH11357, and the Canadian Light Source and its funding partners.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Isomerization of Glucose-to-Fructose in Water over a Continuous Flow Reactor using Ca−Al Mixed Oxide as Heterogeneous Catalyst

  • Ventura, María
  • Mazarío, Jaime
  • Dómine, Marcelo Eduardo
This work reports the continuous isomerization of glucose to fructose in aqueous media under mild conditions using a mixed oxide hydrotalcite-derived catalyst based on Ca and Al. Different operational parameters of the continuous flow fix-bed catalytic reactor system were studied. At the optimal conditions, the Ca−Al-based catalyst achieved a very high conversion and almost quantitative selectivity towards fructose, this being one of the few successful examples of a heterogeneous catalyst capable of carrying out this reaction in a continuous process. Importantly, catalytic activity held steady during four hours on stream, and slight deactivation occurring could be practically overcome by thermal regeneration of the catalyst., Grant PGC2018-097277-B-I00 funded by MCIN/AEI/10.13039/ 501100011033 and “ERDF A way of making Europe“, and the financial support by the Spanish Government (SEV-2016-0683) and Generalitat Valenciana (GVA, PROMETEO/2018/006) are gratefully acknowledged. Authors also thank the ITQ for the technical support, and the Electron Microscopy Service of Universitat Politècnica de València for instrumental facilities. J.M. thanks the Spanish Government (CTQ-2015-67592) for his PhD fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of Ti Incorporation to Bimetallic Mesoporous Carbon in the Production of 2,5-Dimethylfuran from Biomass Derivatives

  • Ledesma, Brenda C.
  • Juárez, Juliana M.
  • Dómine, Marcelo Eduardo
  • Beltramone, Andrea R.
Monometallic and bimetallic supported catalysts were developed to produce 2,5-dimethylfuran (DMF) trough hydrogenolysis of 5-(hydroxymethyl)furfural (HMF). Detailed physicochemical characterization was done to understand structure–activity correlation. Through a series of experiments and comparatives tests, the synergistic effect among Pt, Ir, and Ti incorporated in the support was investigated. Results revealed that using the titanium contained ordered mesoporous carbon, synthesized by a novel technique, high selectivity to DMF was achieved. In the case of the best catalyst PtIr-TiC, the good activity and excellent selectivity to the desired product DMF (98% yield) was related to the high hydrogenating capacity of the bimetallic sites, the acid support characteristics and the high metal nanoparticles dispersion achieved on the mesoporous titanium modified carbon support., NANOTEC, CONICET, Universidad Tecnológica Nacional, Maestro López y Cruz Roja Argentina. We acknowledge the financial support provided by CONICET Argentina, PIP CONICET 11220120100218CO 2020. M.E.D thanks Spanish Government financial support (CTQ2015-67592 and PGC2018-097277-B-I00), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced Methanol Production over Non-promoted Cu-MgO-Al2O3Materials with Ex-solved 2 nm Cu Particles: Insights from an Operando Spectroscopic Study

  • Cored, Jorge
  • Mazarío, Jaime
  • Cerdá Moreno, Cristina
  • Lustemberg, Pablo G.
  • Ganduglia-Pirovano, M. V.
  • Dómine, Marcelo Eduardo
  • Concepción, Patricia
Enhanced methanol production is obtained over a non-promoted Cu-MgO-Al2O3 mixed oxide catalyst derived from a Cu-Mg-Al hydrotalcite precursor (HT) containing narrowly distributed small Cu NPs (2 nm). Conversions close to the equilibrium (∼20%) with a methanol selectivity of 67% are achieved at 230 °C, 20 bar, and a space velocity of 571 mL·gcat-1·h-1. Based on operando spectroscopic studies, the striking activity of this Cu-based catalyst is ascribed to the stabilization of Cu+ ions favored under reaction conditions due to lattice reorganization associated with the "HT-memory effect"promoted by water. Temperature-resolved infrared-mass spectrometry experiments have enabled the discernment of monodentate formate species, stabilized on Cu+ as the intermediate in methanol synthesis, in line with the results of density functional theory calculations. These monodentate formate species are much more reactive than bridge formate species, the latter ones behaving as intermediates in methane and CO formation. Moreover, poisoning of the Cu0 surface by strongly adsorbed species behaving as spectators is observed under reaction conditions. This work presents a detailed spectroscopic study highlighting the influence of the reaction pressure on the stabilization of active surface sites, and the possibility of enhancing methanol production on usually less active non-promoted nano-sized copper catalysts, provided that the proper support is selected, allowing the stabilization of doped Cu+. Thus, a methanol formation rate of 2.6 × 10-3 molMeOH·gcat-1·h-1 at 230 °C, 20 bar, and WHSV = 28 500 mL·gcat-1·h-1 is obtained on the Cu-MgO-Al2O3 HT-derived catalyst with 71% methanol selectivity, compared to 2.2 × 10-4 molMeOH·gcat-1·h-1 with 54% methanol selectivity obtained on a reference Cu/(Al2O3/MgO) catalyst not derived from a HT structure., The research leading to these results received funding from the Spanish Ministry of Science, Innovation and Universities through “Severo Ochoa” Excellence Programme (SEV-2016-0683) and through the RTI2018-099668-B-C21 and RTI2018-101604-B-I00 projects. The authors also thank the Microscopy Service of UPV for kind help on measurements. J.C. thanks the Spanish Government (MINECO) for a “Severo Ochoa” grant (BES-2015-075748). J.M. thanks the MICINN (CTQ2015-67592) for his Ph.D. scholarship. M.E.D. thanks financial support by the Spanish Government (PGC2018-097277-B100). P.G.L. thanks the CSIC for the extension of the MSCA-IF Grant Agreement no. 832121. Computer time provided by the RES (Red Española de Supercomputación) resources at Mare Nostrum 4 (BSC, Barcelona) and La Palma (IAC, La Palma) nodes is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bimetallic Intersection in PdFe@FeOx-C Nanomaterial for Enhanced Water Splitting Electrocatalysis

  • Martínez, Jordan
  • Mazarío, Jaime
  • Olloqui-Sariego, José Luis
  • Calvente, Juan José
  • Darawsheh, Mohanad D.
  • Mínguez Espallargas, Guillermo
  • Dómine, Marcelo Eduardo
  • Oña-Burgos, Pascual
Supported Fe-doped Pd-nanoparticles (NPs) are prepared via soft transformation of a PdFe-metal oraganic framework (MOF). The thus synthesized bimetallic PdFe-NPs are supported on FeO@C layers, which are essential for developing well-defined and distributed small NPs, 2.3 nm with 35% metal loading. They are used as bifunctional nanocatalysts for the electrocatalytic water splitting process. They display superior mass activity for the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER), both in alkaline and acid media, compared with those obtained for benchmarking platinum HER catalyst, and ruthenium, and iridium oxide OER catalysts. PdFe-NPs also exhibit outstanding stability against sintering that can be explained by the protecting role of graphitic carbon layers provided by the organic linker of the MOF. Additionally, the superior electrocatalytic performance of the bimetallic PdFe-NPs compared with those of monometallic Pd/C NPs and FeO points to a synergetic effect induced by Fe–Pd interactions that facilitates the water splitting reaction. This is supported by additional characterization of the PdFe-NPs prior and post electrolysis by TEM, XRD, X-ray photoelectron spectroscopy, and Raman revealing that dispersed PdFe NPs on FeO@C promote interactions between Pd and Fe, most likely to be Pd–O–Fe active centers., The authors thank the financial support by the Spanish Government (RTI2018-096399-A-I00). This work has been supported by grants PID2020-117177GB-I00 and CEX2019-000919-M, funded by MCIN/AEI/10.13039/501100011033, Junta de Andalucía (P20_01027 and PYC 20 RE 060 UAL), and the Generalitat Valenciana (PROMETEU2019/066). J. Mazarío thanks the MICINN (CTQ2015-67592) for his Ph.D. scholarship. The authors thank CITIUS-Universidad de Sevilla for providing XPS measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Isomerization of Glucose-to-Fructose in Water over a Continuous Flow Reactor using Ca−Al Mixed Oxide as Heterogeneous Catalyst

  • Ventura, María
  • Mazarío, Jaime
  • Dómine, Marcelo Eduardo
This work reports the continuous isomerization of glucose to fructose in aqueous media under mild conditions using a mixed oxide hydrotalcite-derived catalyst based on Ca and Al. Different operational parameters of the continuous flow fix-bed catalytic reactor system were studied. At the optimal conditions, the Ca−Al-based catalyst achieved a very high conversion and almost quantitative selectivity towards fructose, this being one of the few successful examples of a heterogeneous catalyst capable of carrying out this reaction in a continuous process. Importantly, catalytic activity held steady during four hours on stream, and slight deactivation occurring could be practically overcome by thermal regeneration of the catalyst., Grant PGC2018-097277-B-I00 funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe“, and the financial support by the Spanish Government (SEV-2016-0683) and Generalitat Valenciana (GVA, PROMETEO/2018/006) are gratefully acknowledged. Authors also thank the ITQ for the technical support, and the Electron Microscopy Service of Universitat Politècnica de València for instrumental facilities. J.M. thanks the Spanish Government (CTQ-2015-67592) for his PhD fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly dispersed copper oxide on silica: Towards an efficient catalyst for continuous glycerol dehydration to acetol

  • Mazarío, Jaime
  • Cecilia, Juan Antonio
  • Rodríguez-Castellón, Enrique
  • Dómine, Marcelo Eduardo
In most current processes aimed at producing biodiesel glycerol is still a co-product, and its valorisation is essential for the biorefinery. This work relies on previous results showing the dependence of the selective dehydration of glycerol to acetol (hydroxyacetone) on achieving a moderate acidity and the redox functionality of copper to complete the chemical process. In this sense, this reaction was studied using CuO supported on silica. Different silicas and copper incorporation methodologies were investigated to develop the best CuO/SiO material. Interestingly, these CuO-based materials developed acidity and became more active when increasing the copper oxide dispersion, thereby going from poorly to intensely effective to dehydrate glycerol selectively to acetol. Catalysts were characterised by different techniques (i.e., ICP, N adsorption, XRD, TPR, HR-TEM, etc.) to explain the differences observed in catalytic activity and acetol yield based on their physicochemical properties., Financial support by Spanish Government (CTQ-2015-67592, PGC2018-097277-B-I00 and SEV-2016-0683) is gratefully acknowledged. J.M. thanks Spanish Government (CTQ-2015-67592) for the Ph.D. fellowship. Authors also thank Miriam Parreño Romero and the Electron Microscopy Service of Universitat Politècnica de València for their support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pd supported on mixed metal oxide as an efficient catalyst for the reductive amination of bio-derived acetol to 2-methylpiperazine

  • Mazarío, Jaime
  • Raad, Zaher
  • Concepción, Patricia
  • Cerdá Moreno, Cristina
  • Dómine, Marcelo Eduardo
An efficient process for synthesizing a high added-value N-heterocycle (2-methylpiperazine, 2-MP) via reductive amination of hydroxyacetone or acetol (product of the selective dehydration of glycerol) with ethylenediamine by using Pd supported catalysts under mild reaction conditions is here presented. Catalysts based on Pd nanoparticles supported on metallic oxides and mixed oxides were prepared and characterized by ICP analysis, XRD, HR-TEM, and NH3-TPD, among others. Catalytic activity comparisons of Pd-based materials (also including commercial references) were done and obtained results correlated with metal particle morphology (analyzed by CO-FTIR) and its ability to activate the C[double bond, length as m-dash]N bond. The best results were attained with Pd/TiO2–Al2O3 and Pd/ZrO2–Al2O3, the former yielding >80% of 2-MP. The Pd/TiO2–Al2O3 catalyst successfully enables the activation of the imine group (C[double bond, length as m-dash]N), due to a larger number of unsaturated Pd sites in its nanoparticles, while keeping a suitable acidity to effectively and selectively carry out the reductive cyclo-amination reaction even with lower catalyst loadings. This research work offers a new and sustainable catalytic route for the synthesis of organo-nitrogen compounds taking advantage of renewable raw materials (i.e. acetol) as a carbon source and using efficient Pd supported catalysts., The authors express their gratitude to the Spanish Government for the funding (MICINN: CTQ2015-67592, PGC2018-097277-B-I00 and Severo Ochoa Program: SEV-2016-0683). J. M. thanks the MICINN (CTQ2015-67592) for his PhD scholarship. Z. R. thanks the Islamic Center Association for Guidance and Higher Education for his PhD scholarship. The authors also thank the Electron Microscopy Service of Universitat Politècnica de València for their support and M. Parreño-Romero for her assistance with the measurements., Peer reviewed