Pasar al contenido principal

ALMACENAMIENTO DE ENERGIA VIA REDUCCION DE CO2 A COMBUSTIBLES Y PRODUCTOS QUIMICOS

ENE2014-57651-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 34
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the Effect of Inorganic Particles on the Gas Transport Properties of Glassy Polyimides for Selective CO2 and H2O Separation

  • Escorihuela-Roca, Sara
  • Valero, Lucía
  • Tena, Alberto
  • Shishatskiy, Sergey
  • Brinkmann, Torsten
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Three polyimides and six inorganic fillers in a form of nanometer-sized particles were studied as thick film solution cast mixed matrix membranes (MMMs) for the transport of CO2, CH4, and H2O. Gas transport properties and electron microscopy images indicate good polymer-filler compatibility for all membranes. The only filler type thatdemonstrated good distribution throughout the membrane thickness at 10 wt.% loading was BaCe0.2Zr0.7Y0.1O3 (BCZY). The influence of this filler on MMM gas transport properties was studied in detail for 6FDA-6FpDA in a filler content range from one to 20 wt.% and for Matrimid((R)) and P84((R)) at 10 wt.% loading. The most promising result was obtained for Matrimid((R))10 wt.% BCZY MMM, which showed improvement in CO2 and H2O permeabilities accompanied by increased CO2/CH4 selectivity and high water selective membrane at elevated temperatures without H2O/permanent gas selectivity loss., This work was financially supported by the Spanish Government (SEV-2016-0683, SVP-2014-068356, Project ENE2014-57651-R and IJCI-2016-28330 grants) and GeneralitatValenciana (PROMETEO/2018/006 grant) and Helmholtz-Zentrum Geesthacht (HZG) through the technology transfer project program and by the Helmholtz Association of German Research Centers through the Helmholtz Portfolio MEMBRAIN.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemical stability in H2S and creep characterization of the mixed protonic conductor Nd5.5WO11.25-d

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Stournari, V.
  • Malzbender, J.
  • Haas-Santo, K.
  • Dittmeyer, Roland
[EN] The integration of hydrogen permeable membranes in catalytic membrane reactors for thermodynamically limited reactions such as steam methane reforming can improve the per-pass yield and simultaneously produce a high-purity H-2 stream. Mixed protonic electronic materials based membranes are potential candidates for these applications due to their elevated temperature operation, good stability and potentially low cost. However, a specific mechanical behavior and stability under harsh atmospheres is needed to guarantee sufficient lifetime in real-world processes. This work presents the mechanical characterization and a study of the chemical stability under H2S containing atmospheres for the compound Nd5.5WO11.(25-8) Mechanical characterization was performed by micro indentation and creep measurements in air. Chemical stability was evaluated by XRD and SEM and the effect of the H2S on the transport properties was evaluated by impedance spectroscopy. Under H2S atmospheres, the total conductivity increases at 600 degrees C and 700 degrees C. The conductivity increase is attributed to the incorporation of S2- ions in oxide-ion sublattice. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved., This work was financially supported by the Spanish Government (ENE2014-57651-R and SEV-2012-0267 grants). Authors would like to thank to U. Gerhards, M. Fabuel, T. Osipova and Dr. Wesel for WDS and SEM analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robust catalytically-activated LSM-BCZY-based composite steam electrodes for proton ceramic electrolysis cells

  • Bausá, Nuria
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Backbone electrodes based on an electronic conductor and a protonic conductor show advantages for proton ceramic electrolyzer cells (PCECs). This work, aims to shed further light on the nature of the rate determining steps in the anode operation and improve the reaction rate in high steam pressure electrolysis mode by (i) adjusting their catalytic activity through electrode infiltration with catalytic electronic-conducting nanoparticles; and (ii) electrochemical activation of surface species by applying a net current through the electrode. A composite formed by La0.8Sr0.2MnO3-delta (LSM) and BaCe0.2Zr0.7Y0.1O3-delta (BCZY27) was deposited on proton-conducting BCZY27 electrolytes and studied in symmetrical cells to investigate the anode microstructure and electrochemical performance. Electrochemical impedance spectroscopy (EIS) measurements were performed in the 800-500 degrees C range under 3 bar of pressure of wet air (75% of steam). LSM/BCZY27 50/50 vol% showed the best performance with an electrode polarization resistance (R-p) of 6.04 omega cm(2) at 700 degrees C and high steam pressure (0.75 bar of air and 2.25 bar of steam) whereas LSM/BCZY27 60/40 vol% presented a R-p of 18.9 omega cm(2). The backbone electrodes were infiltrated using aqueous solutions of metal precursors to boost the electrocatalytic activity towards water splitting and oxygen evolution. The infiltrated cells were fired at 850 degrees C for 2 h to obtain the desired crystalline nanoparticles (Pr6O11, CeO2, ZrO2 and Pr6O11-CeO2) and electrochemically tested under high steam pressures and bias currents to investigate the influence of catalytic activation on surface exchange kinetics. Among the tested catalysts, the lowest electrode polarization resistances (<0.2 omega cm(2)) were reached for the Pr6O11, CeO2 and Pr6O11-CeO2 catalysts at 700 degrees C by applying current densities ranging from 1.57 to 14.15 mA cm(-2), and the Pr6O11-CeO2-activated LSM/BCZY27 electrode exhibited the best performance. Finally, the effect of pO(2) and pH(2)O was investigated aiming to characterize the rate limiting processes in the electrodes., Financial support by the Spanish Government (Grants SEV-2016-0683, RTI2018-102161 and ENE2014-57651), Generalitat Valenciana (PROMETEO/2018/006) and by the EU through FP7 Electra Project (Grant Agreement 621244) is gratefully acknowledged. The support of the microscopy service at Universitat Politecnica de Valencia (UPV) for the SEM analysis is recognized.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Liquid fuels from biomass: An energy self-sustained process integrating H2 recovery and liquid refining

  • D. Catalán-Martínez
  • Domine, Marcelo Eduardo
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] In the last years the research activities on biomass valorisation (mainly residues from urban and agricultural activities) have been intensified. Biomass is an abundant resource for energy generation and its extensive utilization may make possible to fulfil the goals determined by the national and international regulations about renewable sources and greenhouse gas emissions. In this work, simulations are carried out using ASPEN PLUS for an integrated process to produce liquid fuels from biomass in a self-sustainable energetic regime (thermal and electric) and several process factors have been considered. The process initially combines a primary pyrolysis reactor associated to a (char + gases) gasification unit in order to optimize the biomass use, followed by downstream processes to enhance the quality of final liquid fuel. The factors studied were the composition of the biomass, the primary (or pyrolytic) liquid yield, the composition of the liquid fuel, as well as the amount of the oxidant and steam used in the primary char-gasifier reactor. The use of a simplified model for liquid fuel composition let us to stablish a range of operational conditions in which both thermal and electric balance of the process are favourable. In this sense, the maximum extraction of liquid fuel was found around 20-25% by working at 10-25% of O-2 (as pure oxygen or air) and 15-45% of steam in the gasifier and fulfilling self-sustainable process condition, while biomass should possess C/O weight ratios >= 1., Financial support by the Spanish Government (ENE2014-57651, CTQ2015-67592, and SEV-2016-0683 grants) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Protonic Conduction of Partially-Substituted CsH2PO4 and the Applicability in Electrochemical Devices

  • Navarrete Algaba, Laura
  • Andrio, Andreu
  • Moya, Sergio
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] CsH2PO4 is a proton conductor pertaining to the acid salts group and shows a phase transition from monoclinic to cubic phase at 232 +/- 2 degrees C under high-steam atmospheres (>30%). This cubic phase gives rise to the so-called superprotonic conductivity. In this work, the influence of the partial substitution of Cs by Ba and Rb, as well as the partial substitution of P by W, Mo, and S in CsH2PO4 on the phase transition temperature and electrochemical properties is studied. Among the tested materials, the partial substitution by Rb led to the highest conductivity at high temperature. Furthermore, Ba and S-substituted salts exhibited the highest conductivity at low temperatures. CsH2PO4 was used as electrolyte in a fully-assembled fuel cell demonstrating the applicability of the material at high pressures and the possibility to use other materials (Cu and ZnO) instead of Pt as electrode electrocatalyst. Finally, an electrolyzer cell composed of CsH2PO4 as electrolyte, Cu and ZnO as cathode and Pt and Ag as anode was evaluated, obtaining a stable production of H-2 at 250 degrees C., Funding from Spanish Government (SEV-2016-0683, ENE2014-57651 and Juan de la Cierva-Incorporacion 2016 Grants) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mixed Ionic-Electronic Conduction in NiFe2O4-Ce0.8Gd0.2O2-delta Nanocomposite Thin Films for Oxygen Separation

  • Solis Díaz, Cecilia
  • Toldrá-Reig, Fidel
  • Somacescu, Simona
  • García-Fayos, Julio
  • Palafox, Elena
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] NiFe2O4-Ce0.8Gd0.2O2-delta (NFO/CGO) nanocomposite thin films were prepared by simultaneously radio-frequency (RF) magnetron sputtering of both NFO and CGO targets. The aim is the growth of a CO2-stable composite layer that combines the electronic and ionic conduction of the separate NFO and the CGO phases for oxygen separation. The effect of the deposition temperature on the microstructure of the film was studied to obtain high-quality composite thin films. The ratio of both phases was changed by applying different power to each ceramic target. The amount of each deposited phase as well as the different oxidation states of the nanocomposite constituents were analyzed by means of X-ray photoelectron spectroscopy (XPS). The transport properties were studied by conductivity measurements as a function of temperature and pO(2). These analyses enabled (1)selection of the best deposition temperature (400 degrees C), (2)correlation of the p-type electronic behavior of the NFO phase with the hole hopping between Ni3+-Ni2+, and (3)following the conductivity behavior of the grown composite layer (prevailing ionic or electronic character) attained by varying the amount of each phase. The sputtered layer exhibited high ambipolar conduction and surface-exchange activity. A 150 nm-thick nanograined thin film was deposited on a 20 mu m-thick Ba0.5Sr0.5Co0.8Fe0.2O3-delta asymmetric membrane, resulting in up to 3.8 mLmin(-1)cm(-2) O-2 permeation at 1000 degrees C under CO2 atmosphere., Funding from European Union (FP7 Project Green-CC- Grant Agreement 608524), the Spanish Government (ENE2014-57651 and SEV-2016-0683) is kindly acknowledged. The authors also want to acknowledge the Electron Microscopy Service from the Universitat Politecnica de Valencia for their support in the SEM analysis performed in this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Direct CO2 conversion to syngas in a BaCe0.2Zr0.7Y0.1O3- delta-based proton-conducting electrolysis cell

  • Bausá-Martínez, Nuria
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Electrolysis of steam and CO2 is considered to be a promising instrument for energy storage via sustainable H-2 and hydrocarbon production. A model electrolysis cell was assembled using a thick BaCe0.2Zr0.7Y0.1O3-delta (BCZY27) electrolyte and two distinct electrodes, i.e., a (H-2-cathode) porous Pt layer; and (steam-anode) a composite made of 60 vol. % La0.8Sr0.2MnO3-delta (LSM) and 40 vol. % BCZY27. The as-sintered steam electrode was catalytically-activated with Pr6O11-CeO2 nanoparticles. The cell was characterized by means of voltamperometry and impedance spectroscopy. Different operation parameters were analyzed: temperature; water concentration in the anode chamber; and H-2 and CO2 concentration in the cathode chamber. Increasing H2O concentration (in the anode) and presence of CO2 (in the cathode) positively affected the electrode performance giving rise to lower cell overpotential and, consequently, substantial improvement in Faradaic efficiency. The high electrolyte thickness and the non-optimized Pt cathode limited the range of current density and the achieved peak power densities. The Faradaic efficiency for water electrolysis reached a value of 39% at 10.4 mA/cm(2), as determined by the analysis of the H-2 production. During co-electrolysis, the CO2 reaction was fostered by co-feeding a minimum H-2 amount. CO formation took place through the reverse water gas shift (RWGS) reaction. When the current density was applied, CO2 conversion increased due mainly to the non-Faradaic electrochemical modification of catalytic activity (NEMCA effect) that allowed for the improvement of CO2 hydrogenation kinetics., Financial support by the Spanish Government (SEV-2016-0683, Project ENE2014-57651 and IJCI-2016-28330 grants) and by the EU through FP7 Electra Project (Grant Agreement 621244) is gratefully acknowledged. The support of the microscopy service at Universitat Politecnica de Valencia (UPV) for the SEM analysis is recognized.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermochemical stability of LaxSr1-xCoyFe1-yO3-delta and NiFe2O4-Ce0.8Tb0.2O2-delta, under real conditions for its application in oxygen transport membranes for oxyfuel combustion

  • Bermúdez, José M.
  • García-Fayos, Julio
  • Reina, Tomás R.
  • Reed, Graham
  • Persoon, E.
  • Görtz, Daniel
  • Schroeder, M.
  • Millán, M
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] This work addresses the thermochemical stability of ceramic materials ¿typically used in oxygen transport membranes¿ under the harsh gas environments found in oxyfuel combustion processes. Specifically, a dual-phase NiFe2O4-Ce0.8Tb0.2O2-¿ (NFO-CTO) composite and a single-phase La0.6Sr0.4Co0.2Fe0.8O3-¿ (LSCF) were studied. The effect of the main contaminants present in this kind of processes (CO2, SO2 and H2O) has been tested. NFO-CTO composite remains stable under all the conditions studied whereas LSCF presents a poor stability in the presence of CO2 and SO2. Regardless of the treatment, NFO-CTO conserves its crystalline structure, without giving rise to new species due to segregation or incorporation of sulphur and/or carbon. On the contrary, LSCF is prone to degradation in contact with CO2 and SO2, segregating Sr in the form of SrCO3 and SrSO4 and Co and Fe in the form of CoO and Fe3O4. It is also shown that SO2 interaction with LSCF is stronger than in the case of CO2. A concentration of just 2000¿ppm of SO2 in CO2 is enough to subdue the formation of SrCO3, promoting the segregation of Sr only in the form of SrSO4. With the results presented in this work, it is possible to conclude that the NFO-CTO is a suitable candidate from the thermochemical viewpoint to be used as membrane material in 4-end modules for oxygen generation integrated into oxyfuel combustion processes whereas the use of LSCF should be dismissed., Financial support by the EU through FP7 GREEN-CC Project (Grant Agreement Number: 608524). The Spanish Government (ENE2014-57651 and SEV-2016-0683 grants) is gratefully acknowledged by JGF and JMS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

YSZ monoliths promoted with Co as catalysts for the production of H2 by steam reforming of ethanol

  • Gaudillere, Cyril Christian
  • González Pérez, Juan José
  • Chica, Antonio
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Steam reforming of ethanol was investigated between 400 degrees C and 600 degrees C over 3 mol% Y2O3 doped ZrO2 monolith infiltrated with Co, known as an effective catalyst for this reaction. Monoliths were fabricated by implementing the freeze-casting technique in order to obtain hierarchical, vertical and highly ordered porous microstructure resulting in very low pressure drop, high surface area and accessibility to active sites. Catalytic monoliths were firstly loaded with 3 wt% of Co. Catalytic activity of Co-containing monolith was compared with the catalytic activity of a powdered material with the same chemical composition than the catalytic monolith. The results show a clear improvement all over the temperature range of the ethanol conversion and H-2 yield and a decrease of the by-products contents when using a freeze-cast monolith support. The incorporation of La enabled a strong decrease in coke deposition over the activated monolith. The effect of the addition of 0.25 wt.% of Pt was also studied. Pt makes possible to inhibit carbon deposition but has a detrimental effect on ethanol conversion at temperatures above 500 degrees C and on H-2 selectivity at low temperature. A higher Pt loading of 0.8 wt% did not bring any beneficial effect and was even detrimental at low temperature. Finally, the beneficial effect of the implementation of freeze-cast monolith in comparison with the not structured fixed-bed configuration is explained by the difference of packing since and improved fluid dynamics at similar GHSV, the former one promotes in a higher proportion the Water Gas Shift Reaction (WGSR) further in the monolith length. (C) 2017 Elsevier B.V. All rights reserved., Financial support by the Spanish Government (ENE2014-57651 and SEV-2012-0267 grants) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrogen separation through tailored dual phase membranes with nominal composition BaCe0.8Eu0.2O3-delta:Ce0.8Y0.2O2-delta at intermediate temperatures

  • Ivanova, Mariya E.
  • Palisaitis, Justinas
  • Sohn, Yoo Jung
  • Meulenber, Wilhelm A.
  • Guillon, Olivier
  • Mayer, Joachim
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Hydrogen permeation membranes are a key element in improving the energy conversion efficiency and decreasing the greenhouse gas emissions from energy generation. The scientific community faces the challenge of identifying and optimizing stable and effective ceramic materials for H-2 separation membranes at elevated temperature (400-800 degrees C) for industrial separations and intensified catalytic reactors. As such, composite materials with nominal composition BaCe0.8Eu0.2O3-delta:Ce0.8Y0.2O2-delta revealed unprecedented H-2 permeation levels of 0.4 to 0.61 mL center dot min(-1)center dot cm(-2) at 700 degrees C measured on 500 mu m-thick-specimen. A detailed structural and phase study revealed single phase perovskite and fluorite starting materials synthesized via the conventional ceramic route. Strong tendency of Eu to migrate from the perovskite to the fluorite phase was observed at sintering temperature, leading to significant Eu depletion of the proton conducing BaCe0.8Eu0.2O3-delta phase. Composite microstructure was examined prior and after a variety of functional tests, including electrical conductivity, H-2-permeation and stability in CO2 containing atmospheres at elevated temperatures, revealing stable material without morphological and structural changes, with segregation-free interfaces and no further diffusive effects between the constituting phases. In this context, dual phase material based on BaCe0.8Eu0.2O3-delta:Ce0.8Y0.2O2-delta represents a very promising candidate for H-2 separating membrane in energy-and environmentally-related applications, This work has been conducted with the financial support by the Helmholtz Association under the Research Programme Energy Efficiency, Materials and Resources. Financial funding from the Spanish Government (ENE2014-57651 and SEV-2012-0267 grants) is also gratefully acknowledged. ZEA-3 at FZJ is gratefully acknowledged for performing the ICP-OES analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic Layer Optimization for Hydrogen Permeation Membranes Based on La5.5WO11.25-δ/La0.87Sr0.13CrO3-δ Composites

  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Solis Díaz, Cecilia
  • Kjølseth, Christian
[EN] (LWO/LSC) composite is one of the most promising mixed ionic electronic conducting materials for hydrogen separation at high temperature. However, these materials present limited catalytic surface activity toward H-2 activation and water splitting, which determines the overall H-2 separation rate. For the implementation of these materials as catalytic membrane reactors, effective catalytic layers have to be developed that are compatible and stable under the reaction conditions. This contribution presents the development of catalytic layers based on sputtered metals (Cu and Pd), electrochemical characterization by impendace spectroscopy, and the study of the H-2 flow obtained by coating them on 60/40-LWO/LSC membranes. Stability of the catalytic layers is also evaluated under H-2 permeation -conditions and CH4-containing atmospheres., Financial support by the Spanish Government (Grants ENE2014-57651 and SEV-2016-0683) and CoorsTek Membrane Sciences is kindly acknowledged. The support of the Servicio de Microscopia Electronica of the Universitat Politecnica de Valencia is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The impact of support surface area on the SMSI decoration effect and catalytic performance for Fischer-Tropsch synthesis of Co-Ru/TiO2-anatase catalysts

  • Bertella, Francine
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • MARTINEZ FELIU, AGUSTIN|||0000-0002-9974-1567
[EN] A series of Co-Ru/TiO2 catalysts (10 wt% Co, 0.5 wt% Ru, nominal loadings) were prepared by impregnation of TiO2-anatase supports synthesized with different specific surface areas (Ti-L: 53 m2 /g, Ti-M: 117 m2 /g, and Ti-H: 148 m2 /g) by tuning the conditions of the hydrothermal synthesis and/or the calcination treatments. The most relevant physicochemical properties of supports and catalysts were determined by a set of techniques including ICP-OES, XRD, N2 physisorption, electron microscopy (FESEM, HAADF-STEM, HR-TEM), H2-TPR, H2 chemisorption, and IR-CO. Oxidized precursors were reduced in-reactor under flowing pure H2 at 400 °C for 10 h and evaluated for Fischer-Tropsch synthesis (FTS) in a fixed bed reactor at 220 °C, 2.0 MPa, and H2/CO molar ratio of 2. These catalysts exhibited the well-known strong metal-support interaction (SMSI) effect reported for TiO2 materials by which partially reduced TiOx species formed during the catalyst reduction step migrate and decorate the surface of the supported metal phases. The extent to which the SMSI effect occurred was found to increase with the surface area of the TiO2-anatase carrier, as supported by H2 chemisorption, TEM, and IR-CO surface titration experiments. As a consequence, the activity per total mass of cobalt or cobalt-time-yield (CTY) of the Co-Ru/TiO2 catalysts gradually declined with the increase in support surface area: Co-Ru/Ti-L > Co-Ru/ Ti-M > Co-Ru/Ti-H. The catalysts, however, displayed similar initial TOFs, implying a negligible influence of the SMSI effect on the initial intrinsic activity of the surface Co0 sites. The high surface area Co-Ru/Ti-H catalyst exhibiting the most pronounced SMSI also presented the lowest C5+ selectivity. This behavior was explained by considering the contribution of two effects: the lower resistance to the intraparticle diffusion of ¿-olefins when increasing the support surface area, as inferred from the olefin-to-paraffin ratios and the values of the diffusionrelated parameter ¿, and the reduction in size of the cobalt ensembles on the terraces of Co0 nanoparticles, connected to the extent of SMSI, on which chain growth events are favored., Financial support by the MINECO of Spain through the Severo Ochoa (SEV 2012-0267) and ENE2014-5761-R projects is gratefully acknowledged. The authors also thank the Microscopy Service of the Universitat Politecnica de Valencia for its assistance in microscopy characterization. F. Bertella (Science without Frontiers - Process no. 13705/13-0) thanks CAPES for a predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing oxygen permeation through Fe2NiO4-Ce0.8Tb0.2O2-delta composite membranes using porous layers activated with Pr6O11 nanoparticles

  • García-Fayos, Julio
  • Ruhl, R.
  • Navarrete Algaba, Laura
  • Bouwmeester, H.
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Fe2NiO4-Ce0.8Tb0.2O2-delta (NFO-CTO) composite membranes are of interest to separate oxygen from air. In this study, we investigate the influence of the catalytic activation of NFO-CTO membranes on the oxygen permeation rate. Specifically, the effect of activating porous NFO-CTO layers -coated on both sides of the dense NFO-CTO membrane - with Pr6O11 nanoparticles is studied. Measurements in the temperature range 850-700 degrees C revealed a 2-4 fold increase in the oxygen flux after coating a 30 mm-thick porous NFO-CTO layer on both membrane sides, and a 6-12 fold increase relative to the bare membrane after activating the porous layers coated on both sides of the membrane with Pr6O11 nanoparticles. No degradation of the oxygen fluxes was found in CO2-containing atmospheres. Pulse isotopic exchange measurements confirmed an increase in the oxygen surface exchange rate of more than one order of magnitude after dispersion of Pr6O11 nanoparticles on the surface of NFO-CTO composite powders. Electrochemical impedance spectroscopy measurements on symmetrical cells, using Gd-doped ceria (CGO) as the electrolyte and Pr6O11-activated NFO-CTO electrodes, showed a 10-fold decrease in the polarization resistance compared to non-infiltrated electrodes in air. Modification of porous layers by activation with Pr6O11 nanoparticles is considered a viable route to enhance the oxygen fluxes across composite membranes., Financial support by the EU through FP7 GREEN-CC Project (Grant Agreement Number: 608524) and the Spanish Government (ENE2014-57651 and SEV-2016-0683 grants) is gratefully acknowledged. The support of the Servicio de Microscopia Electronica of the Universitat Politecnica de Valencia is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ice-Templating for the Elaboration of Oxygen Permeation Asymmetric Tubular Membrane with Radial Oriented Porosity

  • Gaudillere, Cyril Christian
  • García-Fayos, Julio
  • Plaza-Belda, Jorge
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] An original asymmetric tubular membrane for oxygen production applications was manufactured in a two-step process. A 3 mol% Y2O3 stabilized ZrO2 (3YSZ) porous tubular support was manufactured by the freeze-casting technique, offering a hierarchical and radial-oriented porosity of about 15 µm in width, separated by fully densified walls of about 2 µm thick, suggesting low pressure drop and boosted gas transport. The external surface of the support was successively dip-coated to get a Ce0.8Gd0.2O2¿¿ ¿ 5mol%Co (CGO-Co) interlayer of 80 µm in thickness and an outer dense layer of La0.6Sr0.4Co0.2Fe0.8O3¿¿ (LSCF) with a thickness of 30 µm. The whole tubular membrane presents both uniform geometric characteristics and microstructure all along its length. Chemical reactivity between each layer was studied by coupling X-Ray Diffraction (XRD) analysis and Energy Dispersive X-Ray spectroscopy (EDX) mapping at each step of the manufacturing process. Cation interdiffusion between different phases was discarded, confirming the compatibility of this tri-layer asymmetric ceramic membrane for oxygen production purposes. For the first time, a freeze-cast tubular membrane has been evaluated for oxygen permeation, exhibiting a value of 0.31 mL·min¿1·cm¿2 at 1000 °C under air and argon as feed and sweep gases, respectively. Finally, under the same conditions and increasing the oxygen partial pressure to get pure oxygen as feed, the oxygen permeation reached 1.07 mL·min¿1·cm¿2., Funding from the Spanish Government (ENE2014-57651 and SEV-2016-0683 grants) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nature of Active Nickel Sites and Initiation Mechanism for Ethylene Oligomerization on Heterogeneous Ni-beta Catalysts

  • Moussa, Sara
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Arribas Viana, Maria De Los Desamparados|||0000-0002-5761-288X
  • MARTINEZ FELIU, AGUSTIN|||0000-0002-9974-1567
[EN] Higher olefins produced via ethylene oligomerization are versatile commodity chemicals serving a vast range of industries with large global economic impact. Nickel aluminosilicates are promising candidates to replace the homogeneous catalysts employed in industrial ethylene oligomerization processes. The current poor understanding of the true nature of the active nickel centers and the nickel-mediated oligomerization mechanism in these materials, however, hampers the rational design of improved catalysts. Here we applied in situ time- and temperature-resolved FTIR spectroscopy with simultaneous MS analysis of products to disentangle these fundamental issues using nanocrystalline Ni-beta zeolite as catalyst. We elucidate that isolated Ni2+ cations grafted on acidic silanols are the most likely active species in the working catalysts rather than the generally accepted ion-exchanged nickel cations. On the basis of our results, a plausible initiation mechanism involving a nickel vinyl hydride intermediate from which chain propagation proceeds similarly to the Cossee-Arlman pathway is proposed., This work was supported by the MINECO of Spain through the Severo Ochoa Program for Centers of Excellence (SEV 2016-0683) and ENE2014-5761-R project. The authors extend their acknowledgement to the EU project OCMOL ("Oxidative Coupling of Methane followed by Oligomerization to Liquids", 7th Framework Programme, GA no. 228953)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gas Separation Properties of Polyimide Thin Films on Ceramic Supports for High Temperature Applications

  • Escorihuela-Roca, Sara
  • Tena, Alberto
  • Shishatskiy, Sergey
  • Brinkmann, Torsten
  • Abetz, Volker
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Novel selective ceramic-supported thin polyimide films produced in a single dip coating step are proposed for membrane applications at elevated temperatures. Layers of the polyimides P84 (R), Matrimid 5218 (R), and 6FDA-6FpDA were successfully deposited onto porous alumina supports. In order to tackle the poor compatibility between ceramic support and polymer, and to get defect-free thin films, the effect of the viscosity of the polymer solution was studied, giving the entanglement concentration (C*) for each polymer. The C* values were 3.09 wt. % for the 6FDA-6FpDA, 3.52 wt. % for Matrimid (R), and 4.30 wt. % for P84 (R). A minimum polymer solution concentration necessary for defect-free film formation was found for each polymer, with the inverse order to the intrinsic viscosities (P84 (R) >= Matrimid (R) >> 6FDA-6FpDA). The effect of the temperature on the permeance of prepared membranes was studied for H-2, CH4, N-2, O-2, and CO2. As expected, activation energy of permeance for hydrogen was higher than for CO2, resulting in H-2/CO2 selectivity increase with temperature. More densely packed polymers lead to materials that are more selective at elevated temperatures., This work was financially supported by the Spanish Government through predoctoral training grants for Centres/units of Excellence "Severo Ochoa" (SEV-2016-0683), which gave S. Escorihuela the opportunity to undertake a research stay at Helmholtz-Zentrum Geesthacht (HZG), Spanish Ministry of Economy and Competitiveness (Project ENE2014-57651-R) and Helmholtz-Zentrum Geesthacht (HZG) through the technology transfer project program and by the Helmholtz Association of German Research Centers through the Helmholtz Portfolio MEMBRAIN. The authors thank M. Schieda and P. Merten for the support in the coating process and viscosity determination, and the microscopy service at Universitat Politecnica de Valencia (UPV) for the FE-SEM images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring Electrocatalytic Properties of Solid Oxide Fuel Cell Composite Cathodes Based on (La0.8Sr0.2)(0.95)MnO3+delta and Doped Cerias Ce(1 x)Ln(x)O(2 delta) (Ln=Gd, La, Er, Pr, Tb and x=0.1 0.2)

  • Navarrete Algaba, Laura
  • Vert Belenguer, Vicente Bernardo
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Composites made of different doped cerias and (La0.8Sr0.2)(0.95)MnO3+ were studied as potential solid oxide fuel cell cathodes. Tb, Pr, Gd and Er have been introduced as ceria dopants to enhance the electrocatalytic properties of (La0.8Sr0.2)(0.95)MnO3+ composites fabricated within. Different electrochemical behaviors were observed for the studied composites depending on lanthanide cation nature, i.e., whether they can exhibit different oxidation states or not. Specifically, (La0.8Sr0.2)(0.95)MnO3+/ceria composites with a mixed valence dopants (Tb and Pr) in the CeO2 structure are the best performing and present a limiting step at low frequencies; whereas those with ceria-doping elements withfixed oxidation state (Gd and Er) exhibit the limiting processes at higher frequencies. This fact is related to the higher magnitude of the TPB enlargement in the composite cathode achieved thanks to the promotion of mixed ionic-electronic conductivity in the Pr/Tb-doped ceria phase.The best cathode performance was obtained with (La0.8Sr0.2)(0.95)MnO3+_Ce0.8Pr0.2O2- cathodes with the lowest values for the polarization resistance in the 900-700 degrees C temperature range., Funding from Spanish Government (MINECO ENE2014-57651 grant) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of Potentiometric Sensors for C2H4 Detection

  • Toldrá-Reig, Fidel|||0000-0001-6133-7043
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Gas exhaust emissions in vehicles are increasingly restrictive in EU and USA. Diesel engines are particularly affected by limitation in hydrocarbons and NOx concentrations. This work presents a screening of working electrode materials to develop a potentiometric sensor, with the most promising material to detect being C2H4 at 550 degrees C. The device consists of a dense 8YSZ (8 mol% Y2O3 stabilized ZrO2) disk as oxide-ion conducting electrolyte, whereas platinum is screen-printed in the back face as reference electrode. As working electrode, several materials such as Fe0.7Cr1.3O3, ZnCr2O4, Fe2NiO4, La0.8Sr0.2CrO3- (LSC), La0.8Sr0.2MnO3 (LSM), and NiO+5%wt Au were tested to detect C2H4. Sensor voltage was measured for several concentrations of C2H4 and CO as these are two of the major oxidizable compounds in a diesel exhaust gas. Fe0.7Cr1.3O3 was selected as the most promising material because of its response to C2H4 and CO. Not only is the response to the individual analytes important, but the C2H4 cross-sensitivity toward CO is also important. Fe0.7Cr1.3O3 showed a good performance to C2H4, with low cross-sensitivity to CO. In addition, when 0.16 ppm of phenanthrene is added, the sensor still has a slightly better response to C2H4 than to CO. Nevertheless, the sensor exposure to high concentrations (>85 ppm) of polycyclic aromatic hydrocarbons led to signal saturation. On the other hand, the operation in wet conditions induces lower sensor sensitivity to C2H4 and higher cross-sensitivity toward CO increase, i.e., the sensor response becomes similar for C2H4 and CO., This research was funded by Spanish government (AP-2003-03478, SEV-2016-0683 and ENE2014-57651).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalyst Screening for Oxidative Coupling of Methane Integrated in Membrane Reactors

  • García-Fayos, Julio
  • Lobera González, Maria Pilar
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Increased availability of methane from shale gas and stranded gas deposits in the recent years may facilitate the production of ethylene by means of potentially more competitive routes than the state-of-the-art steam cracking processes. One appealing route is the oxidative coupling of methane (OCM), which is considered in this work for the production of ethylene by means of the use of catalytic membrane reactors (CMR) based on Ba0.5Sr0.5Co0.8Fe0.2O3-delta (BSCF) ceramic material. In a first approach, a screening of 15 formulations as catalysts for the ethylene-ethane production was conducted on CMR consisting of disk-shaped planar BSCF membranes. At 900 degrees C, the maximum C-2 selectivity was 70%, reached with Ba0.5Sr0.5FeO3-delta and La0.5Ce0.1Sr0.4Co0.8Fe0.2O3-delta catalysts. On the other hand, low CH4 conversions (X-CH4) resulted in C-2 yields below 3%. Operation at 1,000 degrees C significantly shifted X-CH4 for all the activated membranes due to the decrease in CH4/O-2 ratios, thus obtaining C-2 yields close to 9% and productivities of ca. 1.2ml.min(-1).cm(-2) with Ce0.9Gd0.1O2-delta and Ba0.5Sr0.5Co0.8Fe0.2O3-delta impregnated with Mn-Na2WO4 catalysts. The performance of OCM reaction was also studied in a tubular catalytic membrane reactor. Tubular configuration improved C-2 yield by minimizing CH4/O-2 ratios up to 1.7, obtaining a maximum of 15.6% at 900 degrees C with a BSCF capillary membrane activated with a packed bed of 2 wt% Mn/5 wt% Na2WO4 on SiO2 catalyst., Financial support by the Spanish Government (ENE2014-57651 and SEV-2012-0267 grants) and by the EU through FP7 GREEN-CC Project (GA 608524), is gratefully acknowledged. The authors want also acknowledge the Electron Microscopy Service from the Universitat Politecnica de Valencia for their support in the SEM analysis performed in this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dual-phase membrane based on LaCo0.2Ni0.4Fe0.4O3-x-Ce0.8Gd0.2O2-x composition for oxygen permeation under CO2/SO2-rich gas environments

  • García-Fayos, Julio
  • Baunmann, Stefan
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] A dual-phase material with high ambipolar conductivity composed by the perovskite LaCo0.2Ni0.4Fe0.4O3-delta (LCNF) as the electronic phase and the fluorite Ce0.8Gd0.2O2-delta (CGO20) as oxide-ion conductor is proposed for use as oxygen transport membrane. The chemical compatibility between both materials depends on the synthesis method, i.e. one-pot sol-gel synthesis leads to the formation of the fluorite and the perovskite phases, as well as a third NiO-based phase. The formation of this last phase can be avoided by previously stabilizing the phases separately. The composite material shows high electrical conductivity, i.e., 7.25 S cm(-1) at 800 degrees C for LCNF-CGO20 with NiO impurity, and 2.6 S cm(-1) at 800 degrees C for LCNF-CGO20. A maximum oxygen flux, J(O-2), of 0.74 ml min(-1) cm(-2) is obtained at 1000 degrees C for a surface-activated membrane in Air/Ar gradient at ambient pressure. The membranes were tested under i) 30% CO2 in Ar, and ii) 250 ppm of SO2 in 30% CO2 in Ar, reproducing oxyfuel-like conditions. Oxygen flux decreases in these atmospheres, especially at temperatures below 900 degrees C, due to competitive adsorption of these gases with the O-2. After CO2 and SO2 exposure, initial oxygen fluxes are recovered when switching back to Ar sweeping at temperatures above 900 degrees C. Nevertheless, at temperatures < 900 degrees C the original J(O-2) before SO2 exposure is not fully recovered and postmortem FESEM images reveal the membrane surface degradation in SO2., Financial support by the Spanish Government (ENE2014-57651 and SEV-2016-0683 grants), by the EU through FP7 GREEN-CC Project (GA 608524), and by the Helmholtz Association of German Research Centers through the Helmholtz Portfolio MEM-BRAIN is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel Polymeric Thin-Film Composite Membranes for High-Temperature Gas Separations

  • Weigelt, Fynn
  • Escorihuela-Roca, Sara
  • Descalzo, Alberto
  • Tena, Alberto
  • Shishatskiy, Sergey
  • Brinkmann, Torsten
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Novel selective polymeric thin-film composite membranes (TFCMs) for applications at elevated temperatures were developed. Thin selective layers of the polyimides Matrimid 5218((R)) and 6FDA-6FpDA were cast on a developed polybenzimidazole (PBI) porous support prepared by a phase inversion process. The TFCM properties were investigated with different gases in a wide temperature range, including temperatures up to 270 degrees C. The membranes showed very high thermal stability and performed well at the elevated temperatures. The development of highly thermally resistant polymeric membranes such as these TFCMs opens opportunities for application in high-temperature integrated processes, such as catalytic membrane reactors for the water-gas shift reaction in order to maximize H-2 yield., This work was financially supported by the project "New reactor technologies for chemical and biochemical synthesis processes" ("Neue Reaktortechnologien fur Chemische und Biochemische Syntheseverfahren", FKZ: LFF FV 43), funded by the City of Hamburg (Freie und Hansestadt Hamburg, Behorde furWissenschaft, Forschung und Gleichstellung), Germany, the Spanish Government (SEV-2016-0683, SVP-2014-068356, Project ENE2014-57651-R and IJCI-2016-28330 grants), and Generalitat Valenciana (PROMETEO/2018/006 grant).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative Study of Epoxy-CsH2PO4 Composite Electrolytes and Porous Metal Based Electrocatalysts for Solid Acid Electrochemical Cells

  • Navarrete Algaba, Laura
  • Yoo, Chung-Yul
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Electrochemical cells based on acid salts (CsH2PO4) have attracted great interest for intermediate temperature, due to the outstanding proton conductivity of acid salts. In this work, electrodes and electrolyte were optimized following different strategies. An epoxy resin was added to the CsH2PO4 material to enhance the mechanical properties of the electrolyte, achieving good conductivity, enhanced stability, and cyclability. The electrodes configuration was modified, and Ni sponge was selected as active support. The infiltration of different oxide nanoparticles was carried out to tailor the electrodes resistance by promoting the electrocatalyst activity of electrodes. The selection of a cell supported on the electrode and the addition of an epoxy resin enables the reduction of the electrolyte thickness without damaging the mechanical stability of the thinner electrolyte., Funding from Spanish Government (MINECO ENE2014-57651 grant) is kindly acknowledged. We greatly appreciated using the Convergence Research Laboratory (established by the MNU Innovation Support Project in 2020) to conduct this research. This work was financially supported by the Spanish Government (Grants SEV-2016-0683 and RTI2018-102161) and the Generalitat Valenciana (PROMETEO/2018/006). The authors want also to acknowledge the Electron Microscopy Service from the Universitat Politècnica de València for their support in the SEM analysis performed in this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Surface Functionalization with Ni of Fe0.7Cr1.3O3/8YSZ Electrode in a Potentiometric Sensor To Selectively Detect C2H4

  • Toldrá-Reig, Fidel|||0000-0001-6133-7043
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] This work presents a multidevice potentiometric sensor consisting of Fe0.7Cr1.3O3/8YSZ//8YSZ//Pt to detect selectively C2H4 with a low cross-sensitivity to CO in diesel exhaust gases. The device has been designed as a multisensor to measure up to four channels at the same time. A dense 8YSZ disk is employed as oxide-ion conducting electrolyte where four rectangular-shape working electrodes (Fe0.7Cr13O3/8YSZ) are screen-printed in one face while one common cross-shape reference electrode (LSM/8YSZ) is screen printed in the back face. Two major improvements are proposed in this work: first, change the reference electrode from state-of-the-art Pt to LSM/8YSZ, inexpensive and more active to oxygen. And second, increase the catalytic activity of the working electrode to improve the response of the sensor under wet conditions. The surface activation by nickel and ruthenium nanoparticles deposition enables reduction of the cross-sensitivity toward CO even in wet atmospheres. Ni nanoparticles selectively boost the electrochemically driven oxidation to C2H4 with respect to CO oxidation, as inferred by impedance spectroscopy analysis, Funding from Spanish Government (Grants AP-2003-03478, SEV-2016-0683, and ENE2014-57651) is kindly acknowledged. FPU scholarship to F.T.-R. from the Spanish Ministry of Education, Culture and Sport is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic activation of ceramic H2 membranes for CMR processes

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • KJOLSETH, C.
[EN] The application of catalytic membrane reactors can overcome some of the disadvantages that reactions for the direct conversion of methane to fuels and petrochemicals present. Hydrogen separation membranes can shift the reaction equilibrium by hydrogen removal, improving the separation, selectivity and yield of the reactions. La5.5WO11.25-delta/La0.87Sr0.13CrO3-delta (LWO/LSC) based membranes present a high H-2 flux within the temperature range where CMR can be applied. However, the catalytic activity of the material is very low and it has to be improved. This work presents the development of different catalytic layers based on LSC material and the study of their influence on the H-2 flux obtained by using 60/40-LWO/LSC membranes. Membranes coated with porous layer made of Ni-infiltrated La0.75Ce0.1Sr0.15CrO3-delta exhibited the best permeation flux but still 20% lower than the one reached using Pt layers. Stability of the catalytic layers is also evaluated under H2 permeation conditions and under high steam content methane. (C) 2016 Elsevier B.V. All rights reserved., Financial support by the Spanish Government (Grants ENE2014-57651-R, CSD-2009-0050 and SEV-2012-0267) and CoorsTek Membrane Sciences is kindly acknowledged. The authors are indebted to M. Fabuel for sample preparation. The support of the Servicio de Microscopia Electronica of the Universidad Politecnica de Valencia is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Direct conversion of methane to aromatics in a catalytic co-ionic membrane reactor

  • Hernández Morejudo, Selene
  • Zanón González, Raquel
  • Yuste Tirados, I.
  • Malerod Fjeld, Harald
  • Vestre, P. K.
  • Coors, W. G.
  • Norby, T.
  • Kjolseth, C.
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • MARTINEZ FELIU, AGUSTIN|||0000-0002-9974-1567
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Nonoxidative methane dehydroaromatization (MDA: 6CH(4) <-> C6H6 + 9H(2)) using shape-selective Mo/zeolite catalysts is a key technology for exploitation of stranded natural gas reserves by direct conversion into transportable liquids. However, this reaction faces two major issues: The one-pass conversion is limited by thermodynamics, and the catalyst deactivates quickly through kinetically favored formation of coke. We show that integration of an electrochemical BaZrO3-based membrane exhibiting both proton and oxide ion conductivity into an MDA reactor gives rise to high aromatic yields and improved catalyst stability. These effects originate from the simultaneous extraction of hydrogen and distributed injection of oxide ions along the reactor length. Further, we demonstrate that the electrochemical co-ionic membrane reactor enables high carbon efficiencies (up to 80%) that improve the technoeconomic process viability., This work was supported by the Research Council of Norway (grants 195912, 210418, 210765, and 219194) and the Spanish government (grants SEV-2012-0267 and ENE2014-57651). We thank the ALBA Synchrotron Light Laboratory for beam time provision. C.K. and P.K.V. have applied for a patent based on this work (PCT/EP2014/071697). Experimental data are available online at ftp://itqrepositorio.itq.upv.es/pub/.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of SOFC Composite Cathodes Based on LSM and Doped Cerias Ce0.8Ln0.2O2 (Ln = Gd, Er, Tb and Pr)

  • Navarrete Algaba, Laura
  • Vert Belenguer, Vicente Bernardo
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Composites made of La0.8Sr0.2MnO3-delta (LSM) and lanthanide doped ceria (Ce(0.8)Ln(0.2)O(2-delta), Ln = Gd, Er, Tb and Pr) have been proposed as robust and high-performing solid oxide fuel cell cathodes. The addition of small amounts of highly-dispersed CoOx into the electrode promoted the formation of bridges among LSM-ceria particles. These resulted in the reduction of the required sintering temperature due to the enhancement of the sintering and proper ionic and electronic percolation pathways. In addition, Pr as a multivalent cation dopant in ceria showed the best electrochemical results toward oxygen reduction when the electrode sintering temperature is kept at 1000 degrees C. (C) 2016 The Electrochemical Society. All rights reserved., This work was supported by funding from Spanish Government (MINECO) (SEV-2012-0267 and ENE2014-57651 grants).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Shaping of 3YSZ porous substrates for oxygen separation membranes

  • Escribano-Quintana, Juan Antonio
  • García-Fayos, Julio
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] In recent years, asymmetric membranes based on mixed ionic-electronic conductors (MIEC) have gained importance in practical gas separations. MIEC ceramic materials show high-energy efficiency and high temperature resistance, which allows direct integration in industrial processes. Thin layers are supported on porous substrates that provide mechanical strength. In the asymmetric membrane manufacture, the control of support porosity and microstructure is crucial. Colloidal processing is an interesting method that allows controlling the final microstructure in both surfaces and bulk, with high reproducibility. Here, the development of asymmetric membranes with a top functional layer made of Ce0.8Gd0.2O1.9/Ni2FeO4 composite is presented and aims to maximize oxygen permeation and membrane robustness. The porous substrate is prepared by slip casting while the functional layers by screen-printing. The effect of pore former volume and particle morphology were studied. The combination of spherical and flake-like PMMA particles enabled to generate open porosity suitable for fast gas transport., Financial funding from the Spanish Government (ENE2014-57651 and SEV-2012-0267 grants) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ice-templating for the elaboration of oxygen permeation asymmetric tubular membrane with radial oriented porosity

  • Gaudillere, Cyril
  • García-Fayos, Julio
  • Plaza, Jorge
  • Serra Alfaro, José Manuel
© The Author(s)., An original asymmetric tubular membrane for oxygen production applications was manufactured in a two-step process. A 3 mol% Y2O3 stabilized ZrO2 (3YSZ) porous tubular support was manufactured by the freeze-casting technique, offering a hierarchical and radial-oriented porosity of about 15 µm in width, separated by fully densified walls of about 2 µm thick, suggesting low pressure drop and boosted gas transport. The external surface of the support was successively dip-coated to get a Ce0.8Gd0.2O2−δ – 5mol%Co (CGO-Co) interlayer of 80 µm in thickness and an outer dense layer of La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) with a thickness of 30 µm. The whole tubular membrane presents both uniform geometric characteristics and microstructure all along its length. Chemical reactivity between each layer was studied by coupling X-Ray Diffraction (XRD) analysis and Energy Dispersive X-Ray spectroscopy (EDX) mapping at each step of the manufacturing process. Cation interdiffusion between different phases was discarded, confirming the compatibility of this tri-layer asymmetric ceramic membrane for oxygen production purposes. For the first time, a freeze-cast tubular membrane has been evaluated for oxygen permeation, exhibiting a value of 0.31 mL·min−1·cm−2 at 1000 °C under air and argon as feed and sweep gases, respectively. Finally, under the same conditions and increasing the oxygen partial pressure to get pure oxygen as feed, the oxygen permeation reached 1.07 mL·min−1·cm−2., Funding from the Spanish Government (ENE2014-57651 and SEV-2016-0683 grants) is kindly acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New trends in tailoring active sites in zeolite-based catalysts

  • Shamzhy, Mariya
  • Opanasenko, Maksym
  • Concepción, Patricia
  • Martínez, Agustín
This review addresses the recent developments and trends in tailoring the nature and local properties of active sites in zeolite-based catalysts, with a special focus on novel extra-large pore, layered (2D), nanocrystalline, and hierarchical (mesoporous) zeolites with enhanced pore accessibility. In the first part of the review, we discuss the latest achievements in the bottom-up (direct synthesis) and top-down (post-synthesis) approaches for isomorphous substitution in zeolites enabling control over the type (Brønsted, Lewis, or both), amount, strength, and location of acid sites. The benefits in catalysis provided by such zeolites with tuned acidity and improved accessibility are shown for different acid-catalyzed reactions involving bulky molecules, as in the synthesis of fine chemicals and biomass transformations. The incorporation of metal species of different sizes (increasing from single atoms to clusters and to nanoparticles) in zeolites allows expanding the set of reactions catalyzed by these materials. The main preparation strategies for designing metal-zeolite catalysts, especially those offering control over the size of the metal species, and their catalytic behaviour in industrially relevant and emerging sustainable catalytic processes are dealt with in the second part of the review. Particular attention is paid to the stabilization of size-controlled small metal clusters and nanoparticles through their encapsulation in the voids of zeolite frameworks as well as to the dynamic behaviour of the metal species under reactive environments with important implications in catalysis. The need for using advanced operando spectroscopic and imaging tools to unveil the precise nature and functioning of the active sites in working zeolites is emphasized. The information gathered in this review is expected to provide guidance for developing more efficient zeolite-based catalysts for existing and new applications., MS and MO acknowledge the Primus Research Program of the Charles University project number PRIMUS/17/SCI/22 “Soluble zeolites” and OP VVV “Excellent Research Teams” project no. CZ.02.1.01/0.0/0.0/15_003/0000417 – CUCAM. PC and AM acknowledge financial support from the Spanish government (MINECO) through the “Severo Ochoa Program” (SEV-2016-0683) and the ENE2014-5761-R project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust catalytically-activated LSM-BCZY-based composite steam electrodes for proton ceramic electrolysis cells

  • Bausá, Nuria
  • Serra Alfaro, José Manuel
Backbone electrodes based on an electronic conductor and a protonic conductor show advantages for proton ceramic electrolyzer cells (PCECs). This work, aims to shed further light on the nature of the rate determining steps in the anode operation and improve the reaction rate in high steam pressure electrolysis mode by (i) adjusting their catalytic activity through electrode infiltration with catalytic electronic-conducting nanoparticles; and (ii) electrochemical activation of surface species by applying a net current through the electrode., Financial support by the Spanish Government (Grants SEV-2016-0683, RTI2018-102161 and ENE2014-57651), Generalitat Valenciana (PROMETEO/2018/006) and by the EU through FP7 Electra Project (Grant Agreement 621244) is gratefully acknowledged. The support of the microscopy service at Universitat Politècnica de València (UPV) for the SEM analysis is recognized.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nature of Active Nickel Sites and Initiation Mechanism for Ethylene Oligomerization on Heterogeneous Ni-beta Catalysts

  • Moussa, Sara
  • Concepción, Patricia
  • Arribas, M.A
  • Martínez, Agustín
Higher olefins produced via ethylene oligomerization are versatile commodity chemicals serving a vast range of industries with large global economic impact. Nickel aluminosilicates are promising candidates to replace the homogeneous catalysts employed in industrial ethylene oligomerization processes. The current poor understanding of the true nature of the active nickel centers and the nickel-mediated oligomerization mechanism in these materials, however, hampers the rational design of improved catalysts. Here we applied in situ time- and temperature-resolved FTIR spectroscopy with simultaneous MS analysis of products to disentangle these fundamental issues using nanocrystalline Ni-beta zeolite as catalyst. We elucidate that isolated Ni cations grafted on acidic silanols are the most likely active species in the working catalysts rather than the generally accepted ion-exchanged nickel cations. On the basis of our results, a plausible initiation mechanism involving a nickel vinyl hydride intermediate from which chain propagation proceeds similarly to the Cossee-Arlman pathway is proposed., This work was supported by the MINECO of Spain through the Severo Ochoa Program for Centers of Excellence (SEV 2016-0683) and ENE2014-5761-R project. The authors extend their acknowledgement to the EU project OCMOL (“Oxidative Coupling of Methane followed by Oligomerization to Liquids”, 7th Framework Programme, GA no. 228953).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The impact of support surface area on the SMSI decoration effect and catalytic performance for Fischer-Tropsch synthesis of Co-Ru/TiO2-anatase catalysts

  • Bertella, Francine
  • Concepción, Patricia
  • Martínez, Agustín
A series of Co-Ru/TiO catalysts (10 wt% Co, 0.5 wt% Ru, nominal loadings) were prepared by impregnation of TiO-anatase supports synthesized with different specific surface areas (Ti-L: 53 m/g, Ti-M: 117 m/g, and Ti-H: 148 m/g) by tuning the conditions of the hydrothermal synthesis and/or the calcination treatments. The most relevant physicochemical properties of supports and catalysts were determined by a set of techniques including ICP-OES, XRD, N physisorption, electron microscopy (FESEM, HAADF-STEM, HR-TEM), H-TPR, H chemisorption, and IR-CO. Oxidized precursors were reduced in-reactor under flowing pure H at 400 °C for 10 h and evaluated for Fischer-Tropsch synthesis (FTS) in a fixed bed reactor at 220 °C, 2.0 MPa, and H/CO molar ratio of 2. These catalysts exhibited the well-known strong metal-support interaction (SMSI) effect reported for TiO materials by which partially reduced TiO species formed during the catalyst reduction step migrate and decorate the surface of the supported metal phases. The extent to which the SMSI effect occurred was found to increase with the surface area of the TiO-anatase carrier, as supported by H chemisorption, TEM, and IR-CO surface titration experiments. As a consequence, the activity per total mass of cobalt or cobalt-time-yield (CTY) of the Co-Ru/TiO catalysts gradually declined with the increase in support surface area: Co-Ru/Ti-L > Co-Ru/Ti-M > Co-Ru/Ti-H. The catalysts, however, displayed similar initial TOFs, implying a negligible influence of the SMSI effect on the initial intrinsic activity of the surface Co sites. The high surface area Co-Ru/Ti-H catalyst exhibiting the most pronounced SMSI also presented the lowest C selectivity. This behavior was explained by considering the contribution of two effects: the lower resistance to the intraparticle diffusion of α-olefins when increasing the support surface area, as inferred from the olefin-to-paraffin ratios and the values of the diffusion-related parameter χ, and the reduction in size of the cobalt ensembles on the terraces of Co nanoparticles, connected to the extent of SMSI, on which chain growth events are favored., Financial support by the MINECO of Spain through the Severo Ochoa (SEV 2012-0267) and ENE2014-5761-R projects is gratefully acknowledged. The authors also thank the Microscopy Service of the Universitat Politècnica de València for its assistance in microscopy characterization. F. Bertella (Science without Frontiers − Process no. 13705/13-0) thanks CAPES for a predoctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ni-sepiolite and Ni-todorokite as efficient CO2 methanation catalysts: Mechanistic insight by operando DRIFTS

  • Cerdá Moreno, Cristina
  • Chica Lara, Antonio
  • Keller, S.
  • Rautenberg, C.
  • Bentrup, U.
The hydrogenation of CO to methane was studied on Ni-sepiolite and Ni-todorokite catalysts. Catalytic testing and operando DRIFTS studies revealed the excellent performance of in particular todorokite-based catalysts. The catalytic activity is related to specific reaction pathways depending on the support material. Based on operando DRIFTS studies, different mechanisms are proposed for the methanation reaction. Over Ni-sepiolite catalysts, a dissociative adsorption of CO is observed. Linearly and bridged bonded CO on Ni was identified as intermediate. On Ni-todorokite this dissociative mechanism is accompanied by an associative one. Here, carbonate species were identified as additional intermediates, the formation of which is facilitated by the MnO support. The ability of Ni-todorokite catalysts to activate CO via a dissociative as well as an associative mechanism explains their excellent catalytic performance. The influence of the applied preparation method on the catalytic performance was demonstrated for the Ni-sepiolite catalysts., Financial support by the Spanish Government-MINECO (Project ENE2014-57651-R) is gratefully acknowledged. C. Cerdá-Moreno thanks the Spanish Government-MINECO for the predoctoral fellowship from “Severo Ochoa Program” (SVP-2014-068713). The authors thank H. Lund (LIKAT) for performing the XRD measurements and J. Rabeah (LIKAT) for the EPR measurement of sepiolite. The Electron Microscopy Service of the Universitat Politècnica de València is acknowledged for their help in sample characterization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparative study of epoxy‐CsH2PO4 composite electrolytes and porous metal based electrocatalysts for solid acid electrochemical cells

  • Navarrete Algaba, Laura
  • Yoo, C.Y.
  • Serra Alfaro, José Manuel
Electrochemical cells based on acid salts (CsH2PO4) have attracted great interest for intermediate temperature, due to the outstanding proton conductivity of acid salts. In this work, electrodes and electrolyte were optimized following different strategies. An epoxy resin was added to the CsH2PO4 material to enhance the mechanical properties of the electrolyte, achieving good con-ductivity, enhanced stability, and cyclability. The electrodes configuration was modified, and Ni sponge was selected as active support. The infiltration of different oxide nanoparticles was carried out to tailor the electrodes resistance by promoting the electrocatalyst activity of electrodes. The selection of a cell supported on the electrode and the addition of an epoxy resin enables the reduction of the electrolyte thickness without damaging the mechanical stability of the thinner electrolyte., Funding fromSpanish Government (MINECO ENE2014-57651 grant) is kindly acknowledged