Pasar al contenido principal

RED DE EXCELENCIA EN BIORREFINERIAS SOSTENIBLES

CTQ2016-81848-REDT

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Redes Investigación /Redes Excelencia
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valorization of alcoholic wastes from the vinery industry to produce H2

  • Hernández Soto, María Consuelo
  • Carratalá, J.
  • Beneito, R.
  • Da Costa Serra, Javier Francisco|||0000-0001-7637-8972
  • Chica, Antonio
[EN] This paper focuses on the development of active and stable catalysts for the steam reforming of alcoholic wastes. Two catalysts with high activity in the steam reforming of ethanol have been studied in the steam reforming of an alcoholic waste from the vinery industry, as previous step to their industrial scale up. The catalysts are based on cobalt supported on Zn-hydrotalcite-derived material and natural sepiolite. At laboratory level, the catalytic material based on natural sepiolite showed the best catalytic performance maintaining its catalytic activity for more than 160 h in presence of 50 ppm of sulfur contained in the alcoholic waste. Thus, sepiolite based catalyst was scaled up to prepare a first generation of catalytic monoliths. The reforming activity of this first generation of monoliths was found lower than their corresponding powdered catalyst. The high calcination temperature (1573 K) used in the manufacture of the first generation of monoliths was the responsible of their low performance, which was related to the sintering of cobalt catalyst in a larger crystallite size of metallic cobalt. A second generation of monoliths was prepared using a lower calcination temperature (873 K). Now, the monoliths exhibited a high catalytic performance, similar to the powdered catalyst. The excellent results obtained with the second generation of monoliths have been protected under an invention patent (E201731077). This is the first time that catalytic monoliths based on natural sepiolite promoted with Co are successfully manufactured and tested in the steam reforming of alcoholic wastes from the distillery industry to produce hydrogen., The doctor Javier Francisco Da Costa Serra acknowledges to the Life-Ecoelectricity project for the awarded research contract. Life-ECOELECTRICITY consortium acknowledges the Life Program for funding the Life-ECOELECTRICITY project. The doctor Antonio Chica acknowledges to the RED DE EXCELENCIA EN BIORREFINERIAS SOSTENIBLES (CTQ2016-81848-REDT) for the support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Environmental implications of biohydrogen based energy production from steam reforming of alcoholic waste

  • Cortés, Antonio
  • Feijoo, Gumersindo
  • Moreira, María Teresa
  • Chica, Antonio
  • Da Costa Serra, Javier Francisco|||0000-0001-7637-8972
[EN] Nowadays, there is an increasing demand for energy in the world. With an energy system still based on fossil fuels, a paradigm shifts towards clean energy production based on available renewable resources is necessary. Hydrogen is a high-quality energy carrier that can be used with great efficiency and is expected to acquire a great importance in the next generation of fuels. This study aims to analyze the potential environmental impacts associated with the steam reforming of alcoholic waste from distilleries to produce clean electricity by using the Life Cycle Assessment methodology. The main findings from this study reported that the global environmental profile is better than other alternatives more common as sanitary landfill or incineration. In terms of some impact categories as Abiotic and Ozone Depletion, Acidification and Eutrophication, steam reforming of alcoholic waste performed better profiles than other processes that produce hydrogen from diverse feedstocks., This research was supported by the European Projects STAR-ProBio (Grant Agreement Number 727740) and life-ECOELECTRICITY. The authors (Mr. Antonio Cortes, Prof. Gumersindo Feijoo and Prof. Maria Teresa Moreira) belong to the Galician Competitive Research Group GRCED431C 2017/29 and to the CRETUS Strategic Partnership (ED431E 2018/01), co-funded by FEDER (EU). Prof. Maria Teresa Moreira and Prof. Antonio Chica acknowledge to Red de Excelencia en biorrefinerias sostenibles (CTQ2016-81848-REDT).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic Processes For Lignin Valorization into Fuels and Chemicals (Aromatics)

  • Ventura, María
  • Dómine, Marcelo Eduardo
  • Chávez-Sifontes, M.
Valorization of lignocellulosic biomass becomes a sustainable alternative against the constant depletion and environmental problems of fossil sources necessary for the production of chemicals and fuels. In this context, a wide range of renewable raw materials can be obtained from lignocellulosic biomass in both polymeric (i.e. cellulose, starch, lignin) and monomeric (i.e. sugars, polyols, phenols) forms. Lignin and its derivatives are interesting platform chemicals for industry, although mainly due to its refractory characteristics its use has been less considered compared to other biomass fractions. To take advantage of the potentialities of lignin, it is necessary to isolate it from the cellulose/ hemicellulosic fraction, and then apply depolymerization processes; the overcoming of technical limitations being a current issue of growing interest for many research groups. In this review, significant data related to the structural characteristics of different types of commercial lignins are presented, also including extraction and isolation processes from biomass, and industrial feedstocks obtained as residues from paper industry under different treatments. The review mainly focuses on the different depolymerization processes (hydrolysis, hydrogenolysis, hydrodeoxygenation, pyrolysis) up to now developed and investigated analyzing the different hydrocarbons and aromatic derivatives obtained in each case, as well as the interesting reactions some of them may undergo. Special emphasis is done on the development of new catalysts and catalytic processes for the efficient production of fuels and chemicals from lignin. The possibilities of applications for lignin and its derivatives in new industrial processes and their integration into the biorefinery of the future are also assessed., Financial support by Spanish Government (CTQ-2015-67592, CTQ2016-81848-REDT, and SEV-2016-0683) and by PhosAgro/UNESCO/IUPAC Partnership (Proj. 139) is gratefully acknowledged. M.C-S. thanks ITQ for this post-doctoral stay support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toluene steam reforming over nickel based catalysts

  • Sayas, S.
  • Vivó, N.
  • Da Costa-Serra, J. F.
  • Chica Lara, Antonio
Steam reforming of toluene (SRT) has been studied initially in eight nickel-based catalysts where nickel (10 wt%) was incorporated in different supports (olivine, Al2O3, MgO, LDH, ZrO, CeO and natural sepiolite) by the incipient wetness impregnation method. Among them, nickel catalyst based on sepiolite exhibited a promising catalytic performance, with a high conversion of toluene (16%), high selectivity to hydrogen (68.4%) and low production of undesired by-products (CO, CH, ethylene and benzene) at low temperature (500 °C). On the other hand, the incorporation of Ni in the sepiolitic material by precipitation (PP) has been considered as alternative method to the incipient wetness impregnation method (IWI). PP method allowed to prepare a Ni-based catalyst with a very high activity (conversion of toluene ~100%), high selectivity to hydrogen (73%) and lower production of undesirable by-products (5% CO, 2% CH and 0% CH) at 575 °C. In addition, catalytic deactivation due to coke deposition and nickel sinterization was clearly lower for the catalyst synthesized by PP. Characterization by different physicochemical techniques (XRD, TEM, BET surface area, ICP-OES, TPR and EA) showed that PP method allowed to obtain a sepiolite-based catalyst containing Ni with larger external surface area and smaller, highly dispersed and easily reducible Ni metal particles. The results here discussed show that the Ni incorporation method has a clear influence in the preparation of nickel catalyst supported on sepiolite with improved catalytic performance in the steam reforming of toluene., The doctor Javier Francisco Da Costa Serra acknowledges to the Life-Ecoelectricity project (LIFE15 CCM/ES/000080) funded by the European Union for the awarded research contract. Life-ECOELECTRICITY consortium acknowledges the European Life Program for funding the Life-ECOELECTRICITY project (LIFE15 CCM/ES/000080). The doctor Antonio Chica acknowledges to the RED DE EXCELENCIA EN BIORREFINERIAS SOSTENIBLES (CTQ2016-81848-REDT) funded by the Spanish Government for it support. Acknowledges also to the Electronic Microscopy Service of UPV by the TEM images.