Pasar al contenido principal

TRATAMIENTOS CATALITICOS AVANZADOS PARA LA VALORIZACION DE LA BIOMASA Y LA ELIMINACION DE RESIDUOS ASOCIADOS

CTQ2015-68951-C3-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 44
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure-reactivity correlations in Vanadium containing catalysts for the one-pot glycerol oxidehydration to acrylic acid

  • Chieregato, Alessandro
  • Bandinelli, Claudia
  • Puzzo, Francesco
  • Basile, Francesco
  • Cavani, Fabrizio
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] The design of suitable catalysts for the one-pot conversion of glycerol into acrylic acid (AA) is a complex matter, as only fine-tuning of the redox and acid properties makes it possible to obtain significant yields of AA. However, fundamental understanding behind the catalytic phenomenon is still unclear. Structure-reactivity correlations are clearly behind these results, and acid sites are involved in the dehydration of glycerol into acrolein with vanadium as the main (or only) redox element. For the first time, we propose an in-depth study to shed light on the molecular-level relations behind the overall catalytic results shown by several types of V-containing catalysts. Different multifunctional catalysts were synthesized, characterized (>X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy, temperature-programmed reduction, and temperature-programmed desorption of ammonia), and tested in a flow reactor. Combining the obtained results with those acquired from an in situ FTIR spectroscopy study with acrolein (a reaction intermediate), it was possible to draw conclusions on the role played by the various physicochemical features of the different oxides in terms of the adsorption, surface reactions, and desorption of the reagents and reaction products., The Instituto de Tecnologia Quimica thanks the Spanish Government-MINECO projects (CTQ2015-68951-C3-1-R and SEV-2012-0267). CIRI Energia e Ambiente (University of Bologna) is acknowledged for a Ph.D. grant to A.C. Consorzio INSTM (Firenze) is acknowledged for a Ph.D. grant to C.B.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanocrystalline SSZ-39 zeolite as an efficient catalyst for the methanol-to-olefin (MTO) process

  • Martín García, Nuria
  • Li, Zhibin
  • Yu, Jihong
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The synthesis of nanosized SSZ-39 zeolite has been achieved using a high silica FAU zeolite as the Si and Al source and tetraethylphosphonium (TEP) cations as OSDAs. The obtained SSZ-39 material shows a remarkably high catalyst lifetime compared to conventional SSZ-13 and SSZ-39 materials., Financial support by the Spanish Government-MINECO through ‘‘Severo Ochoa’’ (SEV2012-0267), MAT2015-71261-R, and CTQ2015-68951-C3-1-R is acknowledged. The European Union is also acknowledged by the SYNCATMATCH project (Grant Agreement no. 671093). N. M. thanks MINECO for economical support through pre-doctoral fellowship (BES-2013-064347). J. Y. and A. C. thank the National Natural Science Foundation of China (21320102001) for supporting this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Vanadium Supported on Alumina and/or Zirconia Catalysts for the Selective Transformation of Ethane and Methanol

  • Benomar, S.
  • Masso Ramírez, Amada
  • Solsona Espriu, Benjamin Eduardo
  • Isaadi, R.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Vanadium supported on pure (Al2O3, ZrO2) or mixed zirconia-alumina (with Al/(Al + Zr) ratio of 0.75 or 0.25) catalysts have been prepared by wet impregnation, using homemade prepared supports. The catalysts have been characterized and tested in the oxidative dehydrogenation (ODH) of ethane and in the methanol aerobic transformation. The catalytic performance strongly depends on the nature of the metal oxide support. Thus, activity decreases in the order: VOx/ZrO2 > VOx/(Al,Zr-oxides) > VOx/Al2O3. On the other hand, at low and medium ethane conversions, the selectivity to ethylene presents an opposite trend: VOx/Al2O3 > VOx/(Al,Zr-oxides) > VOx/ZrO2. The different selectivity to ethylene at high conversion is due to the lower/higher initial ethylene formation and to the extent of the ethylene decomposition. Interestingly, VOx/(Al,Zr-oxides) with low Zr-loading present the lowest ethylene decomposition. The catalytic results obtained mainly depend on the nature of the supports whereas the role of the dispersion of vanadium species is unclear. In methanol oxidation, the catalysts tested present similar catalytic activity regardless of the support (Al2O3, ZrO2 or mixed Al2O3-ZrO2) but strong differences in the selectivity to the reaction products. Thus, dimethyl ether was mainly observed on alumina-supported vanadium oxide catalysts (which is associated to the presence of acidic sites on the surface of the catalyst, as determined by TPD-NH3). Formaldehyde was the main reaction product on catalysts supported on Zr-containing oxides (which can be related to a low presence of acid sites). In this article, the importance of the presence of acid sites in ethane ODH, which can be estimated using the methanol transformation reaction, is also discussed., The authors would like to acknowledge the DGICYT (CTQ2015-68951-C3-1-R and MAT2017-84118-C2-1-R projects), the Secretary of State for International Cooperation in Spain (Project AP/040992/11) and FEDER for financial support. B.S. also thanks the University of Valencia (UV-INV-AE16-484416).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Porous clays heterostructures as supports of iron oxide for environmental catalysis

  • Sanchis Martinez, Rut
  • Cecilia,J.A.
  • Vazquez, Isabel
  • Dejoz, Ana
  • Rodriguez-Castellon, E.
  • Solsona Espriu, Benjamin Eduardo
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Porous Clays Heterostructures (PCH) from natural pillared clays (bentonite with a high proportion of montmorillonite) have been used as supports of iron oxide for two reactions of environmental interest: i) the elimination of toluene (a representative compound of one of the most toxic subsets of volatile organic compounds, aromatics) by total oxidation and ii) the selective oxidation of H2S to elemental sulfur. For both reactions these catalysts have resulted to be remarkably more efficient than similar catalysts prepared using conventional silica as a support. Thus, in the total oxidation of toluene it has been observed that the catalytic activity obtained using siliceous PCH is two orders of magnitude higher than that with conventional silica. The catalytic activity has shown to be dependant of the capacity of the support for dispersing iron oxide in a way that the higher the dispersion of iron oxide on the surface of the support, the higher is the activity. In the case of the selective oxidation of H2S to S both higher catalytic activity and higher selectivity to S have been observed using siliceous porous clays heterostructures than using conventional silica. Highly dispersed FeOx species have been shown as highly selective towards elemental sulfur whereas more aggregated FeOx species favour the formation of sulphur oxides decreasing the selectivity to S. Analyses of the surface by XPS have shown the predominance of sulfate species in the catalysts presenting low selectivity to elemental sulfur., The authors would like to acknowledge the DGICYT in Spain (CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R, CTQ2012-37925-C03-2, CTQ2012-37925-C03-3 and CTQ2012-37984-C02-01) and FEDER for financial support. We also thank the University of Valencia for funding (UV-INV-AE-16-484416) and SCSIE-UV for assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimizing both catalyst preparation and catalytic behaviour for the oxidative dehydrogenation of ethane of Ni-Sn-O catalysts

  • Solsona Espriu, Benjamin Eduardo
  • Agouram, Said
  • Dejoz, Ana
  • Vázquez, Maria Isabel
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] Bulk Ni-Sn-O catalysts have been synthesized, tested in the oxidative dehydrogenation of ethane and characterized by several physicochemical techniques. The catalysts have been prepared by evaporation of the corresponding salts using several additives in the synthesis gel, i.e. ammonium hydroxide, nitric acid, glyoxylic acid or oxalic acid, in the synthesis gel. The catalysts were finally calcined at 500 degrees C in air. Important changes in the catalytic behaviour have been observed depending on the additive. In fact, an important improvement in the catalytic performance is observed especially when some additives, such as glyoxylic or oxalic acid, are used. Thus the productivity to ethylene multiplies by 6 compared to the reference Ni-Sn-O catalyst if appropriate templates are used, and this is the result of an improvement in both the catalytic activity and the selectivity to ethylene. This improved performance has been explained in terms of the decrease of the crystallite size (and the increase in the surface area of catalyst) as well as the modification of the lattice parameter of nickel oxide., The authors would like to acknowledge the DGICYT in Spain (CTQ2015-68951-C3-1-R and CTQ2012-37925-C03-2) for financial support. We also thank the University of Valencia and SCSIE-UV for assistance
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Total oxidation of VOCs on mesoporous iron oxide catalysts: soft chemistry route versus hard template method

  • Solsona Espriu, Benjamin Eduardo
  • Garcia, T.
  • Sanchis Martinez, Rut
  • Moreno, M.
  • Rodríguez-Castellon, Enrique
  • Agouram, Said
  • Dejoz, Ana
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A comparative study on the total oxidation of volatile organic compounds, VOCs, on mesoporous iron oxide catalysts prepared by soft chemistry route versus those achieved by hard template method, The authors would like to acknowledge the DGICYT in Spain (CTQ2012-37925-C03-1, CTQ2012-37925-C03-2, CTQ2012-37925-C03-3 and CTQ2012-37984-C02-01) and FEDER for financial support. We also thank the University of Valencia and SCSIE-UV for assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Partial oxidation of H2S to sulfur on V-Cu-O mixed oxides bronzes

  • Ruiz-Rodríguez, Lidia
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Rodríguez-Castellón, Enrique
[EN] The present paper shows the influence of Cu-content in Cu-promoted V2O5 catalysts on both the physicochemical characteristics of catalysts and their catalytic performance in the partial oxidation of hydrogen sulfide. Both, the catalytic activity for H2S conversion and the selectivity to sulfur increased when increasing the Cu/V ratio of catalysts. The best catalyst gives a selectivity to sulfur at ca. 98% at total conversion of H2S. According to the characterization results (XRD, FTIR), V2O5 is partially transformed into vanadium oxide bronze, i.e. beta-Cu0.261V2O5, up to Cu/V ratios of 0.25. For higher Cu/V ratios, CuV2O6 and beta-Cu0.261V2O5 are observed. In the same way, the reducibility of V-species increased when increasing the Cu/V ratio of catalysts. On the other hand, the characterization of used catalysts indicates the transformation of V2O5 into V4O9, whereas the vanadium oxide bronze is stable under the studied reaction. The catalytic results are explained on the basis of the nature of crystalline phases and the presence of V5+-O-V4+ pairs in the more selective catalysts., The authors would like to acknowledge the Spanish MINECO Projects (CTQ2015-68951-C3-1-R and CTQ2015-68951-C3-3-R) and Severo Ochoa Program (SEV-2016-0683), and FEDER funds, for financial support. LRR thanks the MINECO for a predoctoral contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrothermal stability and catalytic performance of desilicated highly siliceous zeolites ZSM-5

  • Tarach, Karolina A.
  • Góra-Marek, Kinga
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Rey Garcia, Fernando|||0000-0003-3227-5669
Highly siliceous zeolites, namely MFI type have attracted the great attention due to their higher hydrothermal stability, higher selectivity to organic compounds, and often better catalytic properties in comparison with Al-rich zeolites. The native zeolite (Si/Al = 164) and its desilicated analogues were deeply characterized with regard to their structural and textural properties by X-ray diffraction, low temperature adsorption of nitrogen and solid-state Al-27 MAS NMR. Their acidic properties were evaluated in quantitative IR studies. Finally, the catalytic performance of desilicated zeolites ZSM-5 was evaluated in the cracking of n-decane, 1,3,5-tri-iso-propylbenzene and vacuum gas oil. In this article, it is shown that high silica zeolites prepared by NaOH and NaOH&TBAOH leaching presented good hydrothermal stability with only slightly lower resistance when comparing to native steamed zeolite. The mesoporosity was preserved after the steaming treatment. The influence of the generated mesoporosity on the higher activity was evidenced in both 1,3,5-tri-isopropylbenzene and diesel oil cracking of steamed hierarchical zeolites. In spite of their lowered acidity, the mesopores system benefited the diffusion of the bulky molecule and finally provided higher activity of hierarchical zeolites. (C) 2016 Elsevier Inc. All rights reserved., This work was financed by Grant No. 2015/18/E/ST4/00191 from the National Science Centre - Poland. F. Rey and J. Martinez-Triguero thank for the support of the Spanish Government-MINECO through "Severo Ochoa" (SEV 2012-0267), MAT2015-71842-P and CTQ2015-68951-C3-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ferric sludge derived from the process of water purification as an efficient catalyst and/or support for the removal of volatile organic compounds

  • Sanchis, Rut
  • Dejoz, Ana
  • Vázquez, Isabel
  • Vilarrasa-García, Enrique
  • Jiménez-Jiménez, José
  • Rodríguez-Castellón, Enrique
  • Solsona, Benjamín
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Ferric chloride solutions are used as coagulants or flocculants in water treatment operations for human consumption. This treatment produces large amounts of clay-type solids formed mainly of montmorillonite with iron oxides and humic substances. This ferric sludge can be used as an efficient catalyst for the removal of volatile organic compounds (VOCs) by total oxidation. This waste isolated in the purification process has been activated by calcinations in air, characterized by several physicochemical techniques and employed as a catalyst for the removal by total oxidation of representative VOCs: toluene, propane and mixtures of toluene/propane with or without water. This ferric sludge has shown a catalytic activity one order of magnitude higher than that of a commercial iron oxide. This high activity has been related to the composition of the sludge (as it contains active metal oxides such as oxides of iron and manganese) and to the porous structure (leading to a reasonably high surface area). Moreover, it can be also used as a support for platinum, showing comparable (or even higher) catalytic activity than a similar platinum catalyst supported on conventional gamma-alumina., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R and CTQ2015-68951-C3-3-R. Authors from UV thank the University of Valencia (UV-INV-AE16-484416 project) and MINECO (MAT2017-84118-C2-1-R project) for funding. Finally, authors thank the Electron Microscopy Service of SCSIE of Universitat de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective catalytic reduction of nitric oxide with ammonia over Fe-Cu modified highly silicated zeolites

  • Jouini, Houini
  • Mejri, Imène
  • Martinez-Ortigosa, Joaquin
  • Cerrillo, José Luis
  • Mhamdi, Mourad
  • Delahay, Gerard
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
[EN] In the present study, the solid-state ion exchange method (SSIE) was applied to introduce iron and copper into highly silicate zeolites: beta (BEA, Si/Al¿=¿12.5), ferrierite (FER, Si/Al¿=¿10) and mordenite (MOR, Si/Al¿=¿10). The activity of the prepared samples in the selective catalytic reduction of NO with ammonia (NH3-SCR) was measured. The highest performance was recorded for Cu-Fe-BEA followed by Cu-Fe-MOR while Cu-Fe-FER showed a low catalytic activity over the entire reaction temperature range. It is shown in this study that the zeolite framework is one of the parameters controlling the amount, environment and distribution of metal species formed during the ion exchange process in Cu-Fe-zeolite catalysts., Financial support by the MINECO of Spain through the Severo Ochoa (SEV-2016-0683) and CTQ2015-68951C3-1-R projects is gratefully acknowledged. The authors thank the Electron Microscopy Service of the Universitat Politecnica de Valencia, Spain for STEM experiments. J. Martinez-Ortigosa (SEV-2012-0267-02) is grateful to Severo Ochoa Program for a predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

NiO diluted in high surface area TiO2 as efficient catalysts for the oxidative dehydrogenation of ethane

  • Sanchis, R.
  • Delgado-Muñoz, Daniel
  • Agouram, S.
  • Vázquez, M. I.
  • Rodriguez-Castellon, E.
  • Solsona, B.
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Catalysts consisting of NiO diluted in high surface area TiO2 can be as efficient in the oxidative dehydrogenation of ethane as the most selective NiO-promoted catalysts reported previously in the literature. By selecting the titania matrix and the NiO loading, yields to ethylene over 40% have been obtained. In the present article, three different titanium oxides (TiO2) have been employed as supports or diluters of nickel oxide and have been tested in the oxidative dehydrogenation of ethane to ethylene. All TiO2 used present anatase as the main crystalline phase and different surface areas of 11,55 and 85 m(2) g(-1). It has been observed that by selecting an appropriate nickel loading and the titanium oxide extremely high selectivity towards ethylene can be obtained. Thus, nickel oxide supported on TiO2 with high surface areas (i.e. 55 and 85 m(2) g(-1)) have resulted to give the best catalytic performance although the optimal nickel loading is different for each case. The optimal catalyst has been obtained for NiO-loadings up to 5-10 theoretical monolayers regardless of the TiO2 employed. Free TiO2 is inactive whereas unsupported NiO is active and unselective (forming mainly carbon dioxide) and, therefore, unmodified NiO particles have to be avoided in order to obtain the optimal catalytic performance. The use of low surface area titania (11 m(2) g(-1)) have led to the lowest selectivity to olefin due to the presence of an excess of free NiO particles. (C) 2017 Elsevier B.V. All rights reserved., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R and SEV-2012-0267 Projects for financial support. D.D. also thanks Severo Ochoa Excellence fellowship (SVP-2014-068669). We also thank the University of Valencia (UV-INV-AE-16-484416 project) and SCSIE-UV for assistance
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the performance of Fe-Cu-ZSM-5 catalyst for the selective catalytic reduction of NO with NH3: the influence of preparation method

  • Jouini, Houda
  • Martinez-Ortigosa, Joaquin
  • Mejri, Imène
  • Mhamdi, Mourad
  • Delahay, Gérard
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
[EN] The selective catalytic reduction of NO with ammonia (NH3-SCR) in the presence of H2O was studied over a series of Fe-Cu-ZSM-5 catalysts prepared by solid-state ion exchange (SSIE), aqueous ion exchange and impregnation methods. The prepared samples were characterized by various techniques (ICP-AES, N-2 physisorption at 77K, XRD, STEM-EDX, XPS, H-2-TPR and DRS UV-vis) to investigate the effect of the preparation method on the activity, texture, structure and metal speciation of the studied catalysts. It was found that the aqueous ion exchange method induced a significant metal loss during the preparation procedure but without any activity deterioration of the catalyst which encloses highly dispersed metal species. The catalysts prepared by SSIE and impregnation showed the highest metal contents and a large number of oxide aggregates leading to an activity decline at high reaction temperatures due to the ammonia oxidation phenomenon., Financial support by the MINECO of Spain through the Severo Ochoa (SEV-2016-0683) and CTQ2015-68951C3-1-R projects is gratefully acknowledged. The authors thank the Electron Microscopy Service of the Universitat Politecnica de Valencia for STEM experiments. J. Martinez-Ortigosa (SEV-2012-0267-02) is grateful to Severo Ochoa Program for a predoctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gas phase dehydration of glycerol to acrolein over WO3-based catalysts prepared by non-hydrolytic sol-gel synthesis

  • Nadji, L.
  • Masso Ramírez, Amada
  • Delgado-Muñoz, Daniel
  • Isaadi, R.
  • Rodríguez-Aguado, E.
  • Rodriguez-Castellon, E.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Solid acid catalysts based on WO3¿SiO2 and WO3¿ZrO2¿SiO2 were prepared by one-pot non-hydrolytic sol¿gel method and tested in the gas phase glycerol dehydration to acrolein. Their structural and textural characteristics were determined by X-ray diffraction (XRD), N2 adsorption, X-ray energy dispersive spectroscopy (XEDS), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). Their acid characteristics were studied by both temperature programmed desorption of ammonia (NH3-TPD) and FTIR of adsorbed pyridine. Under our operating conditions, all the catalysts were active and selective in the transformation of glycerol to acrolein, which was always the main reaction product. The high selectivity to acrolein is achieved on catalysts presenting a higher proportion of Brønsted acid sites. In addition, the role of oxygen in the feed on catalytic performance of these catalysts is also discussed., The authors would like to acknowledge the DGICYT (CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R and SEV-2016-0683) and Secretary of State for International Cooperation in Spain (Project AP/040992/11) and Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships. D. D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). Authors also would like to thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of Phase Composition of Bulk Tungsten Vanadium Oxides on the Aerobic Transformation of Methanol and Glycerol

  • Delgado-Muñoz, Daniel
  • Chieregato, Alessandro
  • Rodríguez-Aguado, E.
  • Rodriguez-Castellon, E.
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Ruiz-Rodríguez, Lidia
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A series of W-V-O catalysts with different m-WO3 and h-WO3 phase contents were hydrothermally synthesized by employing different tungsten, vanadium, and ammonium precursors and characterized by powder XRD, N-2 adsorption, SEM, X-ray energy-dispersive spectroscopy, thermogravimetric analysis, Raman and FTIR spectroscopy, NH3 temperature programmed desorption, H-2 temperature-programmed reduction, and XPS. Finally, the acid/redox properties were analyzed by using aerobic transformation of methanol as a characterization reaction. A correlation between phase composition as well as acid and redox properties was observed, which were correlated to the catalytic performance of the title materials in a one-pot oxydehydration reaction of glycerol. The hexagonal tungsten bronze (h-WO3) phase shows a significantly higher concentration of acid sites than monoclinic m-WO3, so that the acid properties of W-V-O oxides are directly related to the presence of h-WO3 crystals. The presence of a higher concentration of acid sites in V-containing h-WO3 crystals is a key factor to achieve high selectivity to both acrolein and acrylic acid during one-pot glycerol oxydehydration. Also, V sites in h-WO3 show higher selectivity in the consecutive reaction (partial oxidation of acrolein to acrylic acid), while V sites in the m-WO3 phase fundamentally lead to the formation of carbon oxides., The authors acknowledge the DGICYT in Spain, CTQ2015-68951-C3-1-R and CTQ2015-68951-C3-3-R. Authors from ITQ also thank Project SEV-2016-0683 for financial support. D. D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). The research group of Prof. Fabrizio Cavani (University of Bologna, Italy)and Consorzio INSTM (Firenze) are gratefully acknowledged for a PhD grant to A. C. Authors also thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal solution precursors: their role during the synthesis of MoVTeNb mixed oxide catalysts

  • Sánchez-Valente, Jaime
  • Maya-Flores, E.
  • Armendariz-Herrera, H.
  • Quintana-Solorzano, R.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Synthesized via the slurry method and activated at high temperature (873 K), MoVTeNb multimetallic mixed oxides are applied to catalyze the oxidative dehydrogenation of ethane to ethylene (ODHE). Mixed oxides typically contain M1 and M2 crystalline phases, the relative contribution of these phases and the respective catalytic behaviour being notably influenced by the preparation conditions of the metallic aqueous solution precursor, given the complexity of the chemical interactions of metal species in solution. Thus, detailed in situ UV-vis and Raman studies of the chemical species formed in solution during each step of the synthetic procedure are presented herein. The main role of vanadium is to form decavanadate ions, which interact with Mo species to generate an Anderson-type structure. When niobium oxalate solution is added into the MoVTe solution, a yellow-coloured gel is immediately formed due to a common ion effect. When liquid and gel phases are separated, the M1 crystalline phase is produced solely from the gel phase. Attention is also devoted to the influence and role of each metal cation (Mo, V, Te and Nb) on the formation of the active M1 crystalline phase and the catalytic behaviour in the ODHE. The catalyst constituted mostly of M1 crystalline phase is able to convert 45% of the fed ethane, with a selectivity to ethylene of around 90%., This work was financially supported by the Instituto Mexicano del Petroleo (IMP) Project D.61010. EMF thanks CONACyT Mexico and IMP. JMLN thanks DGICYT in Spain (Project CTQ2015-68951-C3-1-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Investigating the Influence of Au Nanoparticles on Porous SiO2-WO3 and WO3 Methanol Transformation Catalysts

  • DePuccio, Daniel P.
  • Ruiz-Rodríguez, Lidia
  • Rodriguez-Castellon, Enrique
  • Landry, Christopher C.
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
  • López Nieto, José Manuel|||0000-0002-6960-3219
Analyzing the structural and chemical properties of materials at the interface of metal nanoparticles and metal oxide supports is important for catalytic applications. Tungsten oxide (WO3) is a widely studied catalyst, but changing the catalytic reactivity at the surface of this oxide with metal nanoparticles is of interest. In this work, we sought to modify the redox properties of porous WO3 and SiO2 WO3 catalysts with sonochemically deposited gold nanoparticles (Au NPs) in order to access and study this reaction pathway. Characterization using powder X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma optical emission spectroscopy (ICP-OES) confirmed that crystalline Au NPs with diameters of 5-12 nm were distributed throughout the catalysts. Temperature-programmed desorption (TPD) was used to probe the surface acidity of the catalysts. The physico-chemical characteristics of catalysts have been also discussed by considering the catalytic performance of these materials in the aerobic transformation of methanol. Catalysts containing nanocrystalline WO3 but no Au NPs displayed very high selectivity to DME (>60%) at all conversions with minor oxidation reactivity, which highlighted the acidic nature of these catalysts. No effect on the acidity of the catalysts was observed by TPD when Au NPs were loaded in the catalysts. The reducibility of the crystalline WO3 species, however, increased significantly due to the interaction with Au NPs, as observed by temperature-programmed reduction (TPR). In the gas-phase transformation of MeOH under aerobic conditions, catalysts modified with Au NPs showed greater activity compared to nonmodified catalysts. In addition, oxidation selectivity to products such as methyl formate as well as formaldehyde, dimethoxymethane, and carbon oxides became heavily favored with only minor dehydration selectivity. The redox properties of these WO3 catalysts could be tuned by changing the Au loading. More labile lattice oxygen and enhanced redox properties at the surface of WO3 modified with Au NPs clearly altered these traditional dehydration catalysts to potential oxidation catalysts. Thus, modification of WO3 with Au is an effective way to expand the MeOH transformation product distribution beyond DME to other useful, oxidized products not typically observed over pure WO3., The authors would like to thank the University of Vermont and the DGICYT in Spain (CTQ2015-68951-C3-1-R, CTQ2012-37925-C3-3-R, and SEV-2012-0267 Severo Ochoa Projects) for financial support and David M. Parker for assistance with catalyst synthesis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Support effects on NiO-based catalysts for the oxidative dehydrogenation (ODH) of ethane

  • Delgado-Muñoz, Daniel
  • Sanchís, R.
  • Cecilia, J. A.
  • Rodríguez-Castellón, E.
  • Caballero, A.
  • Solsona, B.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] We report on the effect of NiO-support interactions on the chemical nature of Ni species in a series of supported NiO catalysts for the ODH of ethane. SiO2, TiO2-anatase, a high surface area TiO2 and a porous clay hetero-structure (PCH) with TiO2 and SiO2 pillars were used as supports, which led to a selectivity to ethylene in the range 30-90% over supported NiO catalysts. The catalysts were characterized by means of XRD, N-2-Adsorption, H-2-TPR, XPS and in situ (under H-2 reductive atmosphere) and ex situ XAS spectroscopy. The catalytic performance of supported materials is discussed in terms of their reducibility and specific reduction kinetics, but also taking into account the specific chemical nature of Ni species on each catalyst. The influence of the particle size and the presence of Ni and O vacancies on the catalytic performance in the ODH of ethane is inferred., Authors would like to thank the DGICYT in Spain CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R, CTQ2012-37925-C03-2 and ENE2017-88818-C2-1-R. Also authors want to acknowledge the ALBA Synchrotron Light Source (Project ID: 2015021258 at CLAESS beamline). Authors from ITQ thank Project SEV-2016-0683 for financial support. D. D. also thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). Authors from UV thank the University of Valencia (UV-INV-AE16-484416 project) and MINECO (MAT2017-84118-C2-1-R project) for funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tungsten-titanium mixed oxide bronzes: Synthesis, characterization and catalytic behavior in methanol transformation

  • Delgado-Muñoz, Daniel
  • Solsona Espriu, Benjamín Eduardo
  • Zamora Blanco, Segundo
  • Agouram, Said
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Tungsten oxide bronze-based materials show extremely adaptive structural and compositional features that make them suitable for functional properties modulation. Herein we report the preparation of a series of Ti-containing tungsten oxide catalysts presenting a hexagonal tungsten bronze-type structure. The insertion of Ti4+ within the structure (likely in the octahedral framework of the hexagonal tungsten bronze) leads to an increase in the number of strong acid sites, and the disappearance of W5+ surface species found in the undoped tungsten oxide. With the aim of studying the acid-redox properties of the titled catalysts, the catalytic transformation of methanol has been carried out in the presence and the absence of O-2 in the feed. Both catalytic activity and the acid-redox properties of these catalysts are highly dependent on catalyst composition and reaction conditions applied (i.e. in the presence or in the absence O-2 in the feed). Aerobic experiments show the depletion of the redox functionality (i.e. no formaldehyde detected in the products) when Ti4+ is incorporated in the framework (i.e. 100% selectivity to dimethyl ether). On the other hand, all the catalysts show the loss of the redox function and a decrease in the catalytic activity when anaerobic conditions are used. In the absence of oxygen, the catalysts are still active in the dehydration of methanol to dimethyl ether, i.e. they maintain their acid functionality even when oxygen is not present in the feed. The results are discussed in terms of the available surface active sites present in each case., Authors would like to thank DGICYT in Spain for RTI2018-099668-B-C21, CTQ2015-68951-C3-1-R and MAT2017-84118-C2-1-R projects. Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). Finally, authors thank the Electron Microscopy Service of SCSIE of Universitat de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of nano-SSZ-13 and its application in the reaction of methanol to olefins

  • Li, Zhibin
  • Yu, Jihong
  • Navarro Villalba, Mª Teresa|||0000-0001-5012-8414
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Nanosized SSZ-13 has been obtained from a one-pot synthesis procedure with the addition of CTAB to the synthesis precursor solution. Nano-SSZ-13 zeolite showed high intracrystalline mesoporosity and compared to standard SSZ-13 presented a much longer lifetime and higher conversion capacity for the reaction of methanol to olefins. The improved properties were attributed to a more efficient utilization of micropores by easier diffusion of reactants and products and slower deactivation by coke. A higher C2/C3 ratio was found for nano-SSZ-13, pointing to a lower deactivation of the aromatics cycle of the hydrocarbon pool., Financial support by the Spanish Government-MINECO through “Severo Ochoa” (SEV 2012-0267), CTQ2015-67592-P, CTQ2015-70126-R, CTQ2015-68951-C3-1-R, MAT2015-71842-P, by the European Union ERC-AdG-2014-671093-SynCatMatch and by the Generalitat Valenciana PROMETEOII/2013/011 is acknowledged. Z. Li acknowledges China Scholarship Council (CSC) for a fellowship. J. Yu thanks the Major International Joint Research Project of China for financial support (Grant No. 21320102001).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of cocrystallized USY/ZSM-5 zeolites from kaolin and its use as fluid catalytic cracking catalysts

  • Ghrib, Y.
  • Frini-Srasra, N.
  • Srasra, E.
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] A series of samples of cocrystallized USY/ZSM-5 zeolites were synthesized from kaolin and silica following a sequential two-step procedure with varying content of ZSM-5 (5-25 wt%). The presence of the ZSM-5 phases was confirmed by XRD and Si-29-NMR. The samples were stabilized by steaming and tested as FCC catalysts in the cracking of vacuum gasoil. The results obtained show that effectiveness of ZSM-5 as a propylene booster is enhanced when zeolites USY and ZSM-5 were synthesized in the same kaolin material, instead of using merely the physical mixtures of the two zeolites. This enhancement is attributed to the higher ability of ZSM-5 to crack larger olefins and suppress hydrogen-transfer to the gasoline fraction when the zeolites are grown together., This work has been supported by the Spanish Government MINECO through "Severo Ochoa" SEV-2016-0683, CTQ2015-67592-P and CTQ2015-68951-C3-1-R, by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Fundacion Ramon Areces through a research contract of the "Life and Materials Science" program. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Self-Organized Transformation from Hexagonal to Orthorhombic Bronze of Cs-Nb-W-O Mixed Oxides Prepared Hydrothermally

  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Garcia-Gonzalez, E.
  • Rodella, C.B.
[EN] The thermal transformation of hydrothermally prepared Cs-Nb-W-O mixed oxides has been studied in the 25-1000 degrees C temperature range. Structural evolution of the prepared solids was monitored by in situ synchrotron X-ray diffraction, absorption spectroscopy techniques, conventional powder X-ray diffraction, thermogravimetric analysis, infrared and Raman spectroscopy, and high resolution transmission electron microscopy (HRTEM and STEM). The as-grown solids show the hexagonal tungsten bronze (HTB) structure, which can be stabilized above 900 degrees C depending on the chemical composition. From this temperature, solids are selectively transformed into the orthorhombic Cs-0.5(Nb2.5W2.5)O-14 structure-type. The same results are obtained for Cs-0.5(Nb2.5W2.5-xMx)O-3, with M = V or Mo (x = 0-1.25). A mechanism for the quantitative transformation at high temperature is proposed in terms of the relative occupancy of the hexagonal channels in the HTB-type phase as well as the Nb/(W + V) ratio., M.D.S. and J.M.L.N. acknowledge the Spanish Government-MINECO projects (CTQ2015-68951-C3-1-R and SEV-2016-0683). E.G.G. acknowledges the financial support through Projects MAT2013-46452-C4 and MAT2016-78362-C4-4-R and the valuable help of Dr. Urones-Garrote in STEM performing. Authors thank the ICTS Centro Nacional de Microscopia Electronica (UCM) for instrumental facilities and LNLS/CNPEM-Brazil for the synchrotron radiation facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling of EPR Parameters for Cu(II): Application to the Selective Reduction of NOx Catalyzed by Cu-Zeolites

  • Fernández-Villanueva, Estefanía
  • Moreno González, Marta
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] We present a combined theoretical-experimental study aiming to provide information about the location and coordination environment of the Cu2+ species involved in the selective reduction of NOx with NH3 catalyzed by Cu-zeolites. From the experimental side, we show and discuss the EPR spectra of the three molecular sieves most widely used as catalysts for the NH3-SCR-NOx reaction, namely Cu-SSZ-13, Cu-SAPO-34 and Cu-ZSM-5 both in their hydrated state and after dehydration. Then, we investigate the EPR spectra of Cu-SSZ-13 and Cu-SAPO-34 under the following conditions: (i) after NH3 adsorption, (ii) after NO addition, and (iii) in the presence of a NO/O-2 mixture. As regards the theoretical part, an exhaustive computational study has been performed that includes geometry optimization and calculation of the EPR parameters of all the relevant systems involved in the NH3-SCR-NOx reaction. The influence of local geometry and Al/Si distribution in the zeolite framework on the EPR parameters and the most probable location of Cu2+ in each material are analyzed, and assignations of the EPR signals obtained under different reaction conditions are discussed., This work has been supported by the Spanish Government through Severo Ochoa Program (SEV 2012-0267), MAT2015-71261-R and CTQ2015-68951-C3-1-R, and by the European Union through ERC-AdG-2014-671093 (SynCatMatch). Red Española de Supercomputación (RES) and Centre de Càlcul de la Universitat de Valencia are gratefully acknowledged for computational resources and technical support. E.F.V. thanks MINECO for her fellowship SVP-2013-068146.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fe2O3 supported on hollow micro/mesospheres silica for the catalytic partial oxidation of H2S to sulfur

  • Cecilia, J.A.
  • Marques Correia, L.
  • Rodríguez-Castellón, E.
  • Silveira Vieira, R.
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A family of Fe-based catalysts supported hollow silica mesospheres has been synthesized and tested in the catalytic partial oxidation of H2S to elemental sulfur at 170.180 degrees C, atmospheric pressure and under 300 min of time-on-stream. The characterization of the synthesized catalysts by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance UV-vis spectra (DRS), H-2-termoprogrammed reduction (H-2-TPR), N-2 adsorption-desorption at -196 degrees C and X-ray photoelectron spectroscopy (XPS) reveals the formation of a catalytic system with high micro- and mesoporosity with high dispersion of the Fe2O3 species. The catalytic results reported high activity in the selective oxidation of H2S, reaching a highest conversion value close to 94% with a selectivity towards elemental sulfur of 98% after 300 min of time on stream (TOS) at 180 degrees C for the HMS-10Fe catalyst. The comparison of Fe-containing HMS (10 wt% of iron loading) with other SiO2-based supports, as a fumed silica (Cab-osil) or a mesoporous silica (SBA-15), presents different H2S conversion values, following the next trend: HMS-10Fe > SBA-10Fe > Cab-10Fe. These results suggest that the use of a support with a narrow pore tend to facilitate the iron dispersion favoring higher conversion rates., The authors wish to acknowledge the financial support provided by the Ministry of Economy and Competitiveness (Spain) (MINECO) CTQ2015-68951-C1-3R y CTQ2015-68951-C3-3R, Junta de Andalucia (Spain) P12-RNM 1565 and FEDER funds. In addition, the authors also thank Fundacao Cearense de Apoio ao Desenvolvimento Cientifico e Tecnologico (FUNCAP) by the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES) - Processo: PDSE 99999.002602/2014-08.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spectroscopic Evidence and Density Functional Theory (DFT) Analysis of Low-Temperature Oxidation of Cu+ to Cu2+NOx in Cu-CHA Catalysts: Implications for the SCR-NOx Reaction Mechanism

  • Moreno-González, Marta
  • Millán-Cabrera, Reisel|||0000-0002-4489-5411
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
[EN] Despite the intense investigation on the NH3-SCR-NOx reaction mechanism catalyzed by small pore Cu-CHA zeolites, neither the rate-determining step of the process nor the exact nature of the active sites under reaction conditions are clearly established. In this work, in situ EPR and IR techniques combined with DFT calculations are applied to the study of the oxidation half-cycle of the NH3-SCR-NOx reaction on Cu-SSZ-13 and Cu-SAPO-34 catalysts. EPR and IR spectroscopies unambiguously show that Cu+ is oxidized to Cu2+ at room temperature in the presence of the reaction mixture (NO, O-2, and NH3) or NO and O-2, producing adsorbed NO2, nitrites, and nitrates. Several pathways are proposed from DFT calculations to oxidize Cu+ cations placed in the plane of the 6R ring units of SSZ-13 and SAPO-34 to Cu2+, either by NO2 alone or by a mixture of NO and O-2, with activation energy barriers lower than 70 kJ mol(-1). The results reported here demonstrate that a reaction mechanism invoking the formation of nitrate/nitrite intermediates on copper cations attached to the zeolite framework can be operational in the low-temperature region (T < 350 degrees C). Moreover, different intermediates, nitrites versus nitrates, are preferentially stabilized, depending on the catalyst composition, silicoaluminophosphate vs aluminosilicate., This work was supported by the Spanish Government through "Severo Ochoa Program" (Nos. SEV 2012-0267; SEV-2016-0683), No. MAT2015-71261-R, and No. CTQ2015-68951-C3-1-R, and by the European Union through No. ERC-AdG-2014-671093 (SynCatMatch). Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are gratefully acknowledged for computational resources and technical support. R.M. acknowledges "La Caixa-Severo Ochoa" International PhD Fellowships (call 2015).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving the catalytic performance of SAPO-18 for the methanol-to-olefins (MTO) reaction by controlling the Si distribution and crystal size

  • Martínez Franco, Raquel
  • Li, Zhibin
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The physico-chemical properties of the small pore SAPO-18 zeotype have been controlled by properly selecting the organic molecules acting as organic structure directing agents (OSDAs). The two organic molecules selected to attempt the synthesis of the SAPO-18 materials were N,N-diisopropylethylamine (DIPEA) and N,N-dimethyl-3,5-dimethylpiperidinium (DMDMP). On the one hand, DIPEA allows small crystal sizes (0.1-0.3 mu m) to be attained with limited silicon distributions when the silicon content in the synthesis gel is high (Si/TO2 similar to 0.8). On the other hand, the use of DMDMP directs the formation of larger crystallites (0.9-1.0 mu m) with excellent silicon distributions, even when the silicon content in the synthesis media is high (Si/TO2 similar to 0.8). It is worth noting that this is the first description of the use of DMDMP as OSDA for the synthesis of the SAPO-18 material, revealing not only the excellent directing role of this OSDA in stabilizing the large cavities present in the SAPO-18 structure, but also its role in selectively placing the silicon atoms in isolated framework positions. The synthesized SAPO-18 materials have been characterized by different techniques, such as powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), N-2 adsorption, solid state NMR, and ammonia temperature programmed desorption (NH3-TPD). Finally, their catalytic activity has been evaluated for the methanol-to-olefin (MTO) process at different reaction temperatures (350 and 400 degrees C), revealing that the SAPO-18 catalysts with optimized silicon distributions and crystal sizes show excellent catalytic properties for the MTO reaction. These optimized SAPO-18 materials present improved catalyst lifetimes compared to standard SAPO-34 and SSZ-39 catalysts, even when tested at low reaction temperatures (i.e. 350 degrees C)., Financial support by the Spanish Government-MINECO through “Severo Ochoa” (SEV 2012-0267), MAT2015-71261-R, and CTQ2015-68951-C3-1-R; by the European Union through ERC-AdG-2014-671093 (SynCatMatch); and by the Generalitat Valenciana through the Prometeo program (PROMETEOII/2013/011) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Redox and Catalytic Properties of Promoted NiO Catalysts for the Oxidative Dehydrogenation of Ethane

  • Delgado-Muñoz, Daniel
  • SOLSONA ESPRIU, BENJAMIN EDUARDO
  • Ykrelef, A.
  • Rodriguez-Gomez, A.
  • Caballero, A.
  • Rodríguez-Aguado, E.
  • Rodriguez-Castellón, E.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] NiO and metal-promoted NiO catalysts (M-NiO, with a M/(M+Ni) atomic ratio of 0.08, with M = Nb, Sn, or La) have been prepared, tested in the oxidative dehydrogenation (ODH) of ethane, and characterized by means of XRD, TPR, HRTEM, Raman, XPS, and in situ XAS (using H-2/He, air or C2H6/He mixtures). The selectivity to ethylene during the ODH of ethane decreases according to the following trend: Nb NiO Sn NiO > La NiO > NiO, whereas the catalyst reducibility (determined by both TPR and XAS using H-2/He mixtures) shows the opposite trend. However, different reducibility and catalytic behavior in the absence of oxygen (ethane/He mixtures) have been observed, especially when comparing Nb- and Sn-promoted NiO samples. These differences can be ascribed mainly to a different phase distribution of the promoter. The results presented here are discussed in terms of the nature of active and selective sites for ODH of ethane in selective and unselective catalysts, but also the role of promoters and the importance of their phase distribution., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R, and CTQ2015-68951-C3-3-R. Authors thank European Synchrotron Radiation Facility, ESRF (Project CH-4512; BM25-SpLine Beamlime). Authors from ITQ also thank Project SEV-2016-0683 for financial support. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). B.S. also thanks UV-INV-AE16-484416. Finally, the authors thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Upgrading of oxygenated compounds present in aqueous biomass-derived feedstocks over NbOx-based catalysts

  • Fernandez-Arroyo-Naranjo, Alberto
  • Domine, Marcelo Eduardo
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Delgado-Muñoz, Daniel
[EN] The influence of synthesis and post-synthesis procedures of different niobium oxides on their catalytic performance in the aqueous phase condensation of oxygenated compounds is studied. Hydrothermally synthesized niobium oxide with a pseudo-crystalline structure shows enhanced acid properties, surface area and consequently better catalytic activity than Nb2O5 prepared by other synthesis methods. The optimized NbOx-based catalyst also demonstrates higher stability after several reuses compared to the Ce-Zr mixed oxide reference catalyst., Financial support by the Spanish Government (CTQ-2015-67592, CTQ-2015-68951-C3-1, and SEV-2012-0267) is gratefully acknowledged. A. F.-A. and D. D. thank the "La Caixa-Severo Ochoa" Foundation and the Severo Ochoa Excellence Program (SVP-2014-068669), respectively, for their fellowships. Authors also thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the synthesis method on the catalytic activity of mayenite for the oxidation of gas-phase trichloroethylene

  • Intiso, Adriano
  • Cucciniello, Raffaele
  • Rossi, Federico
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Catalytic oxidation of trichloroethylene (TCE) in heterogeneous phase (gas-solid) is an effective strategy for the conversion of this pollutant in less harmful compounds, namely CO2, CO and HCl. In this work, we have studied the use of mayenite, a cost-effective material, as an active catalyst for the TCE conversion. In particular, we have assessed the influence of the mayenite synthesis method (hydrothermal, sol-gel and ceramic) on the reaction performance. The materials have been characterized by different techniques, such as XRD, N-2-sorption (BET), TPR, Raman spectroscopy, FESEM-EDX and TEM. The analysis of the light-off curves and product distribution, has shown that the use of the hydrothermal method for the mayenite synthesis results in the most active and selective catalyst. This has been related with a higher surface area and with a higher concentration of oxygen anions in the mayenite prepared by this method. It has been found that the presence of water in the stream do not influence the catalytic performance of the material. A mechanism for the reaction and for the partial deactivation of the catalyst has been proposed., This work was supported by the grants ORSA167988 and ORSA174250 funded by the University of Salerno. AI gratefully acknowledges the Erasmus+ traineeship program. AEP and JMT thanks the Spanish Ministry of Economy and Competitiveness and the Fondo Europeo de Desarrollo Regional through MAT2015-71842-P and CTQ2015-68951-C3-1-R (MINECO/FEDER)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evidence of a Cu2+-Alkane Interaction in Cu-Zeolite Catalysts Crucial for the Selective Catalytic Reduction of NO with Hydrocarbons

  • Moreno González, Marta
  • Chiesa, Mario
  • Giamello, Elio
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
[EN] The selective catalytic reduction of NOx with hydrocarbons (HC-SCR-NOx) on Cu-zeolites is an alternative for the depletion of NOx present in the exhaust gas of diesel engines. The role played by copper and the general reaction pathway are investigated here using propane as reductant (C3H8-SCR-NOx) and Cu-TNU-9 and Cu-Y zeolites as catalysts, giving 80% and 10% NO conversion, respectively, at 623 K. In situ EPR shows that, even at room temperature, Cu2+NO3- is with C3H8 in Cu-TNU-9 but not in Cu-Y. The formation of Cu2+---C3H8 formed in the two Cu-zeolites and that there exists an interaction of Cu2+ species in Cu-TNU-9 is confirmed by HYSCORE EPR experiments and theoretical calculations. Cu2+ is reduced to Cu+ after heating with the reaction mixture to an extent that is related with the catalyst activity. In situ NMR spectra have allowed identifying nitrile and isocyanate as reaction intermediates, which are partially hydrolyzed to carboxylic acid and ammonia. The results allow concluding that the C3H8-SCR-NOx reaction requires the activation of the alkane at accessible isolated Cu2+ and that this generates ammonia which reacts with Cu2+NO3- and NO acting as the reductant. The low activity of Cu-Y zeolite for the C3H8-SCR-NOx reaction proves that C3H8 in the gas phase does not react with Cu2+NO3-, the activation of C3H8 being mandatory on accessible Cu2+ sites. A general reaction scheme for HC-SCR-NOx involving Cu2+/Cu+ redox cycles and the formation of ammonia that acts as a reductant of NO is proposed., The authors acknowledge financial support by the Spanish Government-MINECO through CTQ2015-68951-C3-1-R, "Severo Ochoa" (SEV 2012-0267), and the CSIC (i-Link0821). Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are gratefully acknowledged for computational facilities and technical assistance. M.M.-G. thanks the ITQ for grants.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acidity and accessibility studies of desilicated ZSM-5 zeolites in terms of their effectiveness as catalysts in acid-catalyzed cracking processes

  • Tarach, Karolina A.
  • Góra-Marek, Kinga
  • Melian-Cabrera, Ignacio
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
[EN] The structural, textural and acidic characteristics of hierarchical ZSM-5 (Si/Al = 18¿32), obtained with two desilication approaches, and the effect of these treatments on the reactivity in various cracking reactions of variable feedstock size and severity have been investigated. Emphasis is given to understanding the accessibility of acid sites; this was investigated by textural analysis, FTIR probe molecules (pyridine, trimethylacetonitrile and 2,4,6-trimethylpyridine) and reactions involving n-decane, 1,3,5-triisopropylbenzene (TIPB), and low and high-density polyethylene, LDPE and HDPE, respectively. Higher surface areas and a narrower pore size distribution were obtained for NaOH&TBAOH-treated materials, comparing to NaOH-treated ones. FTIR studies of pivalonitrile and collidine adsorption correlate well with the mesopore surface area. For n-decane cracking activity, the acid strength is a determining factor, revealing that the NaOH&TBAOH treatment gave stronger sites than NaOH, but lower than the native zeolite. In contrast, the TIPB cracking activity was improved by the developed mesoporosity of the alkaline treated zeolites, and this was correlated to the pivalonitrile and collidine accessibility factors. During the n-decane and TIPB cracking, hydrogen transfer reactions were reduced, leading to high olefin production for the NaOH&TBAOH materials due to the shorter microporous paths after desilication. The increased accessibility of the acid sites also leads to an enhanced cracking activity of polyethylenes at low conversions, as determined by a decrease in the T5% and T50%; both parameters are linearly dependent on the pivalonitrile and collidine accessibility factors, for LDPE and HDPE. The T5% for HDPE is more influenced by the accessibility factors than it is for the LDPE. This is interpreted to be the result of the branching degree of HDPE and LDPE; linear HDPE is more sensitive to the enhanced number of pore mouths of ZSM-5 channels on the mesopores. At high conversion, the influence on the T50% of the accessibility factors for HDPE and LDPE is weaker, suggesting that the cracking at this stage involves intermediate molecules of smaller size with fewer diffusional limitations. With respect to our own prior work, the chosen zeolite and the cracking of polyolefins gave more pronounced differences for the hierarchical ZSM-5., K. T. thanks for financial support from the National Science Centre, Poland, Grant No. 2014/13/D/ST5/02761. I. M.-C. thanks De Nederlandse Organisatie voor Wetenschappelijk Onderzoek (NWO) for financial support, project no. 10284. K. G.-M. thanks for financial support from the National Science Centre, Poland, Grant No. 2015/18/E/ST4/00191. J.M.-T.thanks financial support from the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa program (SEV-2012-0267) and the grant CTQ2015-68951-C3-1-R. M. J. Ortiz Iniesta is acknowledged for technical support in the TGA measurements. J. Datka is acknowledged for preliminary discussion on the results presented in the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

W-Nb-O oxides with tunable acid properties as efficient catalysts for the transformation of biomass-derived oxygenates in aqueous systems

  • Delgado-Muñoz, Daniel
  • García-González, Ester
  • Fernandez-Arroyo-Naranjo, Alberto
  • Domine, Marcelo Eduardo
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] W-Nb-O oxide bronzes, prepared hydrothermally, have been characterized and studied as catalysts for both the gas-phase dehydration of glycerol and the liquid-phase selective condensation of light oxygenates derived from primary treatments of biomass (a mixture containing acetic acid, ethanol, propanal, hydroxyacetone and water). By controlling the nominal composition of the catalysts, it is possible to tune their textural and acid properties (concentration and nature of acid sites) to selectively produce acrolein from glycerol or C-5-C-10 hydrocarbons (with low O contents and with high yields) from light oxygenates. Interestingly, these catalysts are stable when working in gas phase reactions and they are re-usable, with high resistance to leaching, when working in aqueous media., Financial support by the Spanish Government (CTQ-2015-68951-C3-1, CTQ-2015-67592, MAT2016-78362-C4-4-R and SEV-2016-0683) and Generalitat Valenciana (GVA, PROMETEO/2018/006) is gratefully acknowledged. A. F.-A. and D. D. thank the "La Caixa-Severo Ochoa" Foundation and Severo Ochoa Excellence Program (SVP-2016-0683), respectively, for their fellowships. The authors thank the ICTS Centro Nacional de Microscopia Electronica (UCM) for instrumental facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Total oxidation of propane using CeO2 and CuO-CeO2 catalysts prepared using templates of different nature

  • Solsona, Benjamín
  • Sanchis, Rut
  • Dejoz, Ana
  • García Martínez, Tomás
  • Ruiz-Rodríguez, Lidia
  • López Nieto, José Manuel
  • Cecilia, Juan Antonio
  • Rodríguez-Castellón, Enrique
Several CeO<sub>2</sub> and CuO-CeO<sub>2</sub> catalysts were prepared using different methods, i.e., a homogeneous precipitation with urea, a nanocasting route using CMK-3 carbon as a hard template and a sol–gel process using Poly(methyl methacrylate) (PMMA) polymer as a soft template, and tested in the total oxidation of propane. The catalysts were characterized by a number of physicochemical techniques (XRD, N<sub>2</sub> adsorption, TPR, XPS, Raman spectroscopy) showing distinct characteristics. For each series, Cu-Ce-O catalysts with low Cu-loadings (5 wt % CuO) showed the highest activity, higher than those samples either without copper or with high Cu-loading (13 wt % CuO). The incorporation of copper leads to an increase of the concentration of bulk defects but if the Cu-loading is too high the surface area drastically falls. The highest activity in the total oxidation of propane was achieved by Cu-containing ceria catalysts synthesized using a polymer as a template, as this method yields high surface area materials. The surface area and the number of bulk/sub-surface defects of the ceria seem to be the main properties determining the catalytic activity., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R. Authors from ITQ also thank Project SEV-2012-0267 for financial support. B.S, R.S and A.M.D also thank UV-INV-AE16-484416.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving the catalytic performance of SAPO-18 for the methanol-to-olefins (MTO) reaction by controlling the Si distribution and crystal size

  • Martínez-Franco, Raquel
  • Li, Zhibin
  • Martínez Triguero, Joaquín
  • Moliner Marín, Manuel
  • Corma, Avelino
The physico-chemical properties of the small pore SAPO-18 zeotype have been controlled by properly selecting the organic molecules acting as organic structure directing agents (OSDAs). The two organic molecules selected to attempt the synthesis of the SAPO-18 materials were N,N-diisopropylethylamine (DIPEA) and N,N-dimethyl-3,5-dimethylpiperidinium (DMDMP). On the one hand, DIPEA allows small crystal sizes (0.1-0.3 μm) to be attained with limited silicon distributions when the silicon content in the synthesis gel is high (Si/TO ∼0.8). On the other hand, the use of DMDMP directs the formation of larger crystallites (0.9-1.0 μm) with excellent silicon distributions, even when the silicon content in the synthesis media is high (Si/TO ∼0.8). It is worth noting that this is the first description of the use of DMDMP as OSDA for the synthesis of the SAPO-18 material, revealing not only the excellent directing role of this OSDA in stabilizing the large cavities present in the SAPO-18 structure, but also its role in selectively placing the silicon atoms in isolated framework positions. The synthesized SAPO-18 materials have been characterized by different techniques, such as powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), N adsorption, solid state NMR, and ammonia temperature programmed desorption (NH-TPD). Finally, their catalytic activity has been evaluated for the methanol-to-olefin (MTO) process at different reaction temperatures (350 and 400 °C), revealing that the SAPO-18 catalysts with optimized silicon distributions and crystal sizes show excellent catalytic properties for the MTO reaction. These optimized SAPO-18 materials present improved catalyst lifetimes compared to standard SAPO-34 and SSZ-39 catalysts, even when tested at low reaction temperatures (i.e. 350 °C)., Financial support by the Spanish Government-MINECO through “Severo Ochoa” (SEV 2012-0267), MAT2015-71261-R, and CTQ2015-68951-C3-1-R; by the European Union through ERC-AdG-2014-671093 (SynCatMatch); and by the Generalitat Valenciana through the Prometeo program (PROMETEOII/2013/011) is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of nano-SSZ-13 and its application in the reaction of methanol to olefins

  • Li, Zhibin
  • Navarro, María Teresa
  • Martínez Triguero, Joaquín
  • Yu, Jihong
  • Corma, Avelino
Nanosized SSZ-13 has been obtained from a one-pot synthesis procedure with the addition of CTAB to the synthesis precursor solution. Nano-SSZ-13 zeolite showed high intracrystalline mesoporosity and compared to standard SSZ-13 presented a much longer lifetime and higher conversion capacity for the reaction of methanol to olefins. The improved properties were attributed to a more efficient utilization of micropores by easier diffusion of reactants and products and slower deactivation by coke. A higher C2/C3 ratio was found for nano-SSZ-13, pointing to a lower deactivation of the aromatics cycle of the hydrocarbon pool., Financial support by the Spanish Government-MINECO through “Severo Ochoa” (SEV 2012-0267), CTQ2015-67592-P, CTQ2015-70126-R, CTQ2015-68951-C3-1-R, MAT2015-71842-P, by the European Union ERC-AdG-2014-671093-SynCatMatch and by the Generalitat Valenciana PROMETEOII/2013/011 is acknowledged. Z. Li acknowledges China Scholarship Council (CSC) for a fellowship. J. Yu thanks the Major International Joint Research Project of China for financial support (Grant No. 21320102001)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Redox and catalytic properties of promoted NiO catalysts for the oxidative dehydrogenation of ethane

  • Delgado Muñoz, Daniel
  • Solsona, B.
  • Ykrelef, A.
  • Rodríguez-Gómez, A.
  • Caballero, Alfonso
  • Rodríguez-Aguado, E.
  • Rodríguez-Castellón, E.
  • López Nieto, José Manuel
NiO and metal-promoted NiO catalysts (M-NiO, with a M/(M+Ni) atomic ratio of 0.08, with M = Nb, Sn, or La) have been prepared, tested in the oxidative dehydrogenation (ODH) of ethane, and characterized by means of XRD, TPR, HRTEM, Raman, XPS, and in situ XAS (using H/He, air or CH/He mixtures). The selectivity to ethylene during the ODH of ethane decreases according to the following trend: Nb-NiO ≈ Sn-NiO > La-NiO > NiO, whereas the catalyst reducibility (determined by both TPR and XAS using H/He mixtures) shows the opposite trend. However, different reducibility and catalytic behavior in the absence of oxygen (ethane/He mixtures) have been observed, especially when comparing Nb- and Sn-promoted NiO samples. These differences can be ascribed mainly to a different phase distribution of the promoter. The results presented here are discussed in terms of the nature of active and selective sites for ODH of ethane in selective and unselective catalysts, but also the role of promoters and the importance of their phase distribution., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R, and CTQ2015-68951-C3-3-R. Authors thank European Synchrotron Radiation Facility, ESRF (Project CH-4512; BM25-SpLine Beamlime). Authors from ITQ also thank Project SEV-2016-0683 for financial support. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). B.S. also thanks UV-INV-AE16-484416. Finally, the authors thank the Electron Microscopy Service of Universitat Politècnica de València for their support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling of EPR Parameters for Cu(II): Application to the Selective Reduction of NOx Catalyzed by Cu-Zeolites

  • Fernández, E.
  • Moreno-González, Marta
  • Moliner Marín, Manuel
  • Blasco, Teresa
  • Boronat, Mercedes
  • Corma, Avelino
We present a combined theoretical—experimental study aiming to provide information about the location and coordination environment of the Cu species involved in the selective reduction of NO with NH catalyzed by Cu-zeolites. From the experimental side, we show and discuss the EPR spectra of the three molecular sieves most widely used as catalysts for the NH-SCR-NO reaction, namely Cu-SSZ-13, Cu-SAPO-34 and Cu-ZSM-5 both in their hydrated state and after dehydration. Then, we investigate the EPR spectra of Cu-SSZ-13 and Cu-SAPO-34 under the following conditions: (i) after NH adsorption, (ii) after NO addition, and (iii) in the presence of a NO/O mixture. As regards the theoretical part, an exhaustive computational study has been performed that includes geometry optimization and calculation of the EPR parameters of all the relevant systems involved in the NH-SCR-NO reaction. The influence of local geometry and Al/Si distribution in the zeolite framework on the EPR parameters and the most probable location of Cu in each material are analyzed, and assignations of the EPR signals obtained under different reaction conditions are discussed., This work has been supported by the Spanish Government through “Severo Ochoa Program” (SEV 2012-0267), MAT2015-71261-R and CTQ2015-68951-C3-1-R, and by the European Union through ERC-AdG-2014-671093 (SynCatMatch). Red Española de Supercomputación (RES) and Centre de Càlcul de la Universitat de Valencia are gratefully acknowledged for computational resources and technical support. E.F.V. thanks MINECO for her fellowship SVP-2013-068146., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of cocrystallized USY/ZSM-5 zeolites from kaolin and its use as fluid catalytic cracking catalysts

  • Ghrib, Y.
  • Frini-Srasra, N.
  • Srasra, E.
  • Martínez Triguero, Joaquín
  • Corma, Avelino
A series of samples of cocrystallized USY/ZSM-5 zeolites were synthesized from kaolin and silica following a sequential two-step procedure with varying content of ZSM-5 (5-25 wt%). The presence of the ZSM-5 phases was confirmed by XRD and Si-NMR. The samples were stabilized by steaming and tested as FCC catalysts in the cracking of vacuum gasoil. The results obtained show that effectiveness of ZSM-5 as a propylene booster is enhanced when zeolites USY and ZSM-5 were synthesized in the same kaolin material, instead of using merely the physical mixtures of the two zeolites. This enhancement is attributed to the higher ability of ZSM-5 to crack larger olefins and suppress hydrogen-transfer to the gasoline fraction when the zeolites are grown together., This work has been supported by the Spanish Government-MINECO through “Severo Ochoa” SEV-2016-0683, CTQ2015-67592-P and CTQ2015-68951-C3-1-R, by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Fundación Ramón Areces through a research contract of the “Life and Materials Science” program. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectroscopic evidence and density functional theory (DFT) analysis of low-temperature oxidation of Cu+ to Cu2+ NOx in Cu-CHA Catalysts: Implications for the SCR-NOx reaction mechanism

  • Moreno-González, Marta
  • Millán, Reisel
  • Concepción, Patricia
  • Blasco, Teresa
  • Boronat, Mercedes
Despite the intense investigation on the NH -SCR-NOx reaction mechanism catalyzed by small pore Cu-CHA zeolites, neither the rate-determining step of the process nor the exact nature of the active sites under reaction conditions are clearly established. In this work, in situ EPR and IR techniques combined with DFT calculations are applied to the study of the oxidation half-cycle of the NH -SCR-NOx reaction on Cu-SSZ-13 and Cu-SAPO-34 catalysts. EPR and IR spectroscopies unambiguously show that Cu is oxidized to Cu at room temperature in the presence of the reaction mixture (NO, O , and NH ) or NO and O , producing adsorbed NO , nitrites, and nitrates. Several pathways are proposed from DFT calculations to oxidize Cu cations placed in the plane of the 6R ring units of SSZ-13 and SAPO-34 to Cu , either by NO alone or by a mixture of NO and O , with activation energy barriers lower than 70 kJ mol . The results reported here demonstrate that a reaction mechanism invoking the formation of nitrate/nitrite intermediates on copper cations attached to the zeolite framework can be operational in the low-temperature region (T < 350 °C). Moreover, different intermediates, nitrites versus nitrates, are preferentially stabilized, depending on the catalyst composition, silicoaluminophosphate vs aluminosilicate., This work was supported by the Spanish Government through “Severo Ochoa Program” (Nos. SEV 2012-0267; SEV-2016-0683), No. MAT2015-71261-R, and No. CTQ2015-68951-C3-1-R, and by the European Union through No. ERC-AdG-2014-671093 (SynCatMatch). Red Española de Supercomputación (RES) and Centre de Càlcul de la Universitat de Valencia are gratefully acknowledged for computational resources and technical support. R.M. acknowledges “La Caixa–Severo Ochoa” International PhD Fellowships (call 2015).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tungsten-titanium mixed oxide bronzes: Synthesis, characterization and catalytic behavior in methanol transformation

  • Delgado Muñoz, Daniel
  • Soriano, M.D.
  • Solsona Espriú, Benjamín
  • Zamora Iranzo, Samuel Andrés
  • Agouram, Saïd
  • Concepción, Patricia
  • López Nieto, José Manuel
Tungsten oxide bronze-based materials show extremely adaptive structural and compositional features that make them suitable for functional properties modulation. Herein we report the preparation of a series of Ti-containing tungsten oxide catalysts presenting a hexagonal tungsten bronze-type structure. The insertion of Ti within the structure (likely in the octahedral framework of the hexagonal tungsten bronze) leads to an increase in the number of strong acid sites, and the disappearance of W surface species found in the undoped tungsten oxide. With the aim of studying the acid-redox properties of the titled catalysts, the catalytic transformation of methanol has been carried out in the presence and the absence of O in the feed. Both catalytic activity and the acid-redox properties of these catalysts are highly dependent on catalyst composition and reaction conditions applied (i.e. in the presence or in the absence O in the feed). Aerobic experiments show the depletion of the redox functionality (i.e. no formaldehyde detected in the products) when Ti is incorporated in the framework (i.e. 100% selectivity to dimethyl ether). On the other hand, all the catalysts show the loss of the redox function and a decrease in the catalytic activity when anaerobic conditions are used. In the absence of oxygen, the catalysts are still active in the dehydration of methanol to dimethyl ether, i.e. they maintain their acid functionality even when oxygen is not present in the feed. The results are discussed in terms of the available surface active sites present in each case., Authors would like to thank DGICYT in Spain for RTI2018-099668-B-C21, CTQ2015-68951-C3-1-R and MAT2017-84118-C2-1-R projects. Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). Finally, authors thank the Electron Microscopy Service of SCSIE of Universitat de València for their support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

W-Nb-O oxides with tunable acid properties as efficient catalysts for the transformation of biomass-derived oxygenates in aqueous systems

  • Delgado Muñoz, Daniel
  • Fernández-Arroyo Naranjo, Alberto
  • Dómine, Marcelo Eduardo
  • García-González, Ester
  • López Nieto, José Manuel
W-Nb-O oxide bronzes, prepared hydrothermally, have been characterized and studied as catalysts for both the gas-phase dehydration of glycerol and the liquid-phase selective condensation of light oxygenates derived from primary treatments of biomass (a mixture containing acetic acid, ethanol, propanal, hydroxyacetone and water). By controlling the nominal composition of the catalysts, it is possible to tune their textural and acid properties (concentration and nature of acid sites) to selectively produce acrolein from glycerol or C-C hydrocarbons (with low O contents and with high yields) from light oxygenates. Interestingly, these catalysts are stable when working in gas phase reactions and they are re-usable, with high resistance to leaching, when working in aqueous media., Financial support by the Spanish Government (CTQ-2015- 68951-C3-1, CTQ-2015-67592, MAT2016-78362-C4-4-R and SEV2016-0683) and Generalitat Valenciana (GVA, PROMETEO/ 2018/006) is gratefully acknowledged. A. F.-A. and D. D. thank the “La Caixa-Severo Ochoa” Foundation and Severo Ochoa Excellence Program (SVP-2016-0683), respectively, for their fellowships. The authors thank the ICTS Centro Nacional de Microscopia Electrónica (UCM) for instrumental facilities.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fe2O3 supported on hollow micro/mesospheres silica for the catalytic partial oxidation of H2S to sulfur

  • Cecilia, Juan Antonio
  • Soriano, M.D.
  • Marques Correia, L.
  • Rodríguez-Castellón, E.
  • López Nieto, José Manuel
  • Silveira Vieira, R.
A family of Fe-based catalysts supported hollow silica mesospheres has been synthesized and tested in the catalytic partial oxidation of HS to elemental sulfur at 170-180 °C, atmospheric pressure and under 300 min of time-on-stream. The characterization of the synthesized catalysts by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance UV–vis spectra (DRS), H-termoprogrammed reduction (H-TPR), N adsorption-desorption at −196 °C and X-ray photoelectron spectroscopy (XPS) reveals the formation of a catalytic system with high micro- and mesoporosity with high dispersion of the FeO species. The catalytic results reported high activity in the selective oxidation of HS, reaching a highest conversion value close to 94% with a selectivity towards elemental sulfur of 98% after 300 min of time on stream (TOS) at 180 °C for the HMS-10Fe catalyst. The comparison of Fe-containing HMS (10 wt% of iron loading) with other SiO-based supports, as a fumed silica (Cab-osil) or a mesoporous silica (SBA-15), presents different HS conversion values, following the next trend: HMS-10Fe > SBA-10Fe > Cab-10Fe. These results suggest that the use of a support with a narrow pore tend to facilitate the iron dispersion favoring higher conversion rates., The authors wish to acknowledge the financial support provided by the Ministry of Economy and Competitiveness (Spain) (MINECO) CTQ2015-68951-C1-3R y CTQ2015-68951-C3-3R, Junta de Andalucía (Spain) P12-RNM 1565 and FEDER funds. In addition, the authors also thank Fundação Cearense de Apoio ao Desenvolvimento Científico e Tecnológico (FUNCAP) by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) - Processo: PDSE 99999.002602/2014–08.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferric sludge derived from the process of water purification as an efficient catalyst and/or support for the removal of volatile organic compounds

  • Sanchis, Rut
  • Dejoz, Ana
  • Vázquez, Isabel
  • Vilarrasa-García, E.
  • Jiménez-Jiménez, José
  • Rodríguez-Castellón, Enrique
  • López Nieto, José Manuel
  • Solsona, Benjamín
Ferric chloride solutions are used as coagulants or flocculants in water treatment operations for human consumption. This treatment produces large amounts of clay-type solids formed mainly of montmorillonite with iron oxides and humic substances. This ferric sludge can be used as an efficient catalyst for the removal of volatile organic compounds (VOCs) by total oxidation. This waste isolated in the purification process has been activated by calcinations in air, characterized by several physicochemical techniques and employed as a catalyst for the removal by total oxidation of representative VOCs: toluene, propane and mixtures of toluene/propane with or without water. This ferric sludge has shown a catalytic activity one order of magnitude higher than that of a commercial iron oxide. This high activity has been related to the composition of the sludge (as it contains active metal oxides such as oxides of iron and manganese) and to the porous structure (leading to a reasonably high surface area). Moreover, it can be also used as a support for platinum, showing comparable (or even higher) catalytic activity than a similar platinum catalyst supported on conventional γ-alumina. This work presents a double environmental perspective since the material employed as a catalyst is a waste sludge and the catalytic reaction studied deals about the elimination of pollutants., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R and CTQ2015-68951-C3-3-R. Authors from UV thank the University of Valencia (UV-INV-AE16-484416 project) and MINECO (MAT2017-84118-C2-1-R project) for funding. Finally, authors thank the Electron Microscopy Service of SCSIE of Universitat de València for their support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the synthesis method on the catalytic activity of mayenite for the oxidation of gas-phase trichloroethylene

  • Intiso, A.
  • Martínez Triguero, Joaquín
  • Cucciniello, R.
  • Rossi, F.
  • Palomares Gimeno, Antonio Eduardo
Catalytic oxidation of trichloroethylene (TCE) in heterogeneous phase (gas-solid) is an effective strategy for the conversion of this pollutant in less harmful compounds, namely CO, CO and HCl. In this work, we have studied the use of mayenite, a cost-effective material, as an active catalyst for the TCE conversion. In particular, we have assessed the influence of the mayenite synthesis method (hydrothermal, sol-gel and ceramic) on the reaction performance. The materials have been characterized by different techniques, such as XRD, N-sorption (BET), TPR, Raman spectroscopy, FESEM-EDX and TEM. The analysis of the light-off curves and product distribution, has shown that the use of the hydrothermal method for the mayenite synthesis results in the most active and selective catalyst. This has been related with a higher surface area and with a higher concentration of oxygen anions in the mayenite prepared by this method. It has been found that the presence of water in the stream do not influence the catalytic performance of the material. A mechanism for the reaction and for the partial deactivation of the catalyst has been proposed., Tis work was supported by the grants ORSA167988 and ORSA174250 funded by the University of Salerno. AI gratefully acknowledges the Erasmus+ traineeship program. AEP and JMT thanks the Spanish Ministry of Economy and Competitiveness and the Fondo Europeo de Desarrollo Regional through MAT2015-71842-P and CTQ2015-68951-C3-1-R (MINECO/FEDER).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Total oxidation of propane using CeO2 and CuO-CeO2 catalysts prepared using templates of different nature

  • Solsona, B.
  • Sanchis, R.
  • Dejoz, A. M.
  • García, T.
  • Ruiz-Rodríguez, L.
  • López Nieto, J. M.
  • Cecilia, J. A.
  • Rodríguez-Castellón, E.
Several CeO2 and CuO-CeO2 catalysts were prepared using different methods, i.e., a homogeneous precipitation with urea, a nanocasting route using CMK-3 carbon as a hard template and a sol–gel process using Poly(methyl methacrylate) (PMMA) polymer as a soft template, and tested in the total oxidation of propane. The catalysts were characterized by a number of physicochemical techniques (XRD, N2 adsorption, TPR, XPS, Raman spectroscopy) showing distinct characteristics. For each series, Cu-Ce-O catalysts with low Cu-loadings (5 wt % CuO) showed the highest activity, higher than those samples either without copper or with high Cu-loading (13 wt % CuO). The incorporation of copper leads to an increase of the concentration of bulk defects but if the Cu-loading is too high the surface area drastically falls. The highest activity in the total oxidation of propane was achieved by Cu-containing ceria catalysts synthesized using a polymer as a template, as this method yields high surface area materials. The surface area and the number of bulk/sub-surface defects of the ceria seem to be the main properties determining the catalytic activity.