Pasar al contenido principal

CATALIZADORES PARA LA ENERGIA Y EL MEDIOAMBIENTE: HIDRODESULFURACION Y HIDRODESOXIGENACION

CTQ2012-37925-C03-03

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSIDAD DE MALAGA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Vanadium oxide supported on porous clay heterostructure for the partial oxidation of hydrogen sulphide to sulfur

  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Cecilia, J. A.
  • Natoli, A.
  • Jimenez-Jimenez, J.
  • Rodriguez Castellon, Enrique
Vanadium oxide supported on porous clay heterostructures (PCH) catalysts have been synthesized, characterized and evaluated in the selective oxidation of H2S to elemental sulfur. The catalysts were characterized by XRD, adsorption-desorption of N-2 at -196 degrees C, diffuse reflectance UV-vis, H-2-TPR, Raman spectroscopy and XPS. The catalysts with higher vanadium content are more active and selective, exhibiting a H2S conversion close to 70% after 360h on stream with a high selectivity toward elemental sulfur and a low formation of undesired SO2. The catalysts with V2O5 crystallites have shown a higher activity and resistance to the deactivation. The analysis of the spent catalyst has revealed the formation of V4O9 crystals during the catalytic test, which has been reported as the active phase in the selective oxidation of the H2S. (C) 2015 Elsevier B.V. All rights reserved., The authors would like to thank the DGICYT in Spain (Projects CTQ2012-37925-C03-01, CTQ2012-37925-C03-03 and FEDER funds, and MAT2010-19837-C06-05) and project of Excellence of Junta de Andalucia (project P12-RNM-1565) for financial support. A. Natoli thanks to SECAT (Spain) for a grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Porous clays heterostructures as supports of iron oxide for environmental catalysis

  • Sanchis Martinez, Rut
  • Cecilia,J.A.
  • Vazquez, Isabel
  • Dejoz, Ana
  • Rodriguez-Castellon, E.
  • Solsona Espriu, Benjamin Eduardo
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Porous Clays Heterostructures (PCH) from natural pillared clays (bentonite with a high proportion of montmorillonite) have been used as supports of iron oxide for two reactions of environmental interest: i) the elimination of toluene (a representative compound of one of the most toxic subsets of volatile organic compounds, aromatics) by total oxidation and ii) the selective oxidation of H2S to elemental sulfur. For both reactions these catalysts have resulted to be remarkably more efficient than similar catalysts prepared using conventional silica as a support. Thus, in the total oxidation of toluene it has been observed that the catalytic activity obtained using siliceous PCH is two orders of magnitude higher than that with conventional silica. The catalytic activity has shown to be dependant of the capacity of the support for dispersing iron oxide in a way that the higher the dispersion of iron oxide on the surface of the support, the higher is the activity. In the case of the selective oxidation of H2S to S both higher catalytic activity and higher selectivity to S have been observed using siliceous porous clays heterostructures than using conventional silica. Highly dispersed FeOx species have been shown as highly selective towards elemental sulfur whereas more aggregated FeOx species favour the formation of sulphur oxides decreasing the selectivity to S. Analyses of the surface by XPS have shown the predominance of sulfate species in the catalysts presenting low selectivity to elemental sulfur., The authors would like to acknowledge the DGICYT in Spain (CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R, CTQ2012-37925-C03-2, CTQ2012-37925-C03-3 and CTQ2012-37984-C02-01) and FEDER for financial support. We also thank the University of Valencia for funding (UV-INV-AE-16-484416) and SCSIE-UV for assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Total oxidation of VOCs on mesoporous iron oxide catalysts: soft chemistry route versus hard template method

  • Solsona Espriu, Benjamin Eduardo
  • Garcia, T.
  • Sanchis Martinez, Rut
  • Moreno, M.
  • Rodríguez-Castellon, Enrique
  • Agouram, Said
  • Dejoz, Ana
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A comparative study on the total oxidation of volatile organic compounds, VOCs, on mesoporous iron oxide catalysts prepared by soft chemistry route versus those achieved by hard template method, The authors would like to acknowledge the DGICYT in Spain (CTQ2012-37925-C03-1, CTQ2012-37925-C03-2, CTQ2012-37925-C03-3 and CTQ2012-37984-C02-01) and FEDER for financial support. We also thank the University of Valencia and SCSIE-UV for assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Partial oxidation of hydrogen sulphide to sulphur over vanadium oxides bronzes

  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Vidal Moya, José Alejandro
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Rodriguez Castellon, Enrique
  • Melo Faus, Francisco Vicente
[EN] Me-containing V2O5 materials (Me =Ag, Cu, Ca and Na) were prepared hydrothermally (from aqueous gels containing V2O5/H2O2/MeClx mixtures, with Me/V ratios of 0.17). The samples were finally heattreated in air or in N2 atmosphere. The heat-treated samples have been characterized by several physicochemical techniques and tested in the partial oxidation of hydrogen sulfide. According to XRD, electron paramagnetic resonance and 51V NMR results, Ag0.35V2O5 and Na0.33V2O5 (or NaV6O15) bronzes with a minority presence of V2O5 were mainly obtained in the case of Ag- and Na-containing materials in samples both heat-treated in air or in N2 atmosphere. In the case of Cu- and Ca-containing samples, V2O5 was mainly observed in samples calcined in air. However, Cu0.26V2O5 and Ca0.17V2O5 bronzes, with the minority presence of V2O5, have been observed in Cu- and Ca-containing samples heat-treated in N2. On the other hand, the catalytic behavior strongly depends on the metal promoter. Thus catalysts presenting vanadium oxide bronzes, i.e. samples presenting Ag0.35V2O5, NaV6O15, Cu0.26V2O5 or Ca0.17V2O5 shows a catalytic activity during the partial oxidation of H2S to sulfur higher than that observed over pure V2O5 or over promoted catalysts presenting mainly V2O5 (i.e. Cu- or Ca-containing samples calcined in air). Moreover, some differences in the selectivity to sulfur were observed. A higher formation of SO2 at high reaction temperature has been favored over Ag0.35V2O5-containing catalyst. This different behavior between samples could be explained by the presence of metallic Ag on the surface of Ag0.35V2O5, which was detected by XRD. Also, higher formation of SO2 is favored in the case of catalyst heat-treated in N2, in which the presence of VO2, as minority, could have a role in combustion of sulfur. Accordingly, this work should be considered as a first approach to relate catalytic activity of the Me-containing vanadium oxide bronze (containing Ag, Cu, Ca and Na) for the selective oxidation of hydrogen sulfide., The authors would like to thank the DGICYT in Spain (Projects CTQ2012-37925-0O3-01 and CTQ2012-37925-0O3-03) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Investigating the Influence of Au Nanoparticles on Porous SiO2-WO3 and WO3 Methanol Transformation Catalysts

  • DePuccio, Daniel P.
  • Ruiz-Rodríguez, Lidia
  • Rodriguez-Castellon, Enrique
  • Landry, Christopher C.
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
  • López Nieto, José Manuel|||0000-0002-6960-3219
Analyzing the structural and chemical properties of materials at the interface of metal nanoparticles and metal oxide supports is important for catalytic applications. Tungsten oxide (WO3) is a widely studied catalyst, but changing the catalytic reactivity at the surface of this oxide with metal nanoparticles is of interest. In this work, we sought to modify the redox properties of porous WO3 and SiO2 WO3 catalysts with sonochemically deposited gold nanoparticles (Au NPs) in order to access and study this reaction pathway. Characterization using powder X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma optical emission spectroscopy (ICP-OES) confirmed that crystalline Au NPs with diameters of 5-12 nm were distributed throughout the catalysts. Temperature-programmed desorption (TPD) was used to probe the surface acidity of the catalysts. The physico-chemical characteristics of catalysts have been also discussed by considering the catalytic performance of these materials in the aerobic transformation of methanol. Catalysts containing nanocrystalline WO3 but no Au NPs displayed very high selectivity to DME (>60%) at all conversions with minor oxidation reactivity, which highlighted the acidic nature of these catalysts. No effect on the acidity of the catalysts was observed by TPD when Au NPs were loaded in the catalysts. The reducibility of the crystalline WO3 species, however, increased significantly due to the interaction with Au NPs, as observed by temperature-programmed reduction (TPR). In the gas-phase transformation of MeOH under aerobic conditions, catalysts modified with Au NPs showed greater activity compared to nonmodified catalysts. In addition, oxidation selectivity to products such as methyl formate as well as formaldehyde, dimethoxymethane, and carbon oxides became heavily favored with only minor dehydration selectivity. The redox properties of these WO3 catalysts could be tuned by changing the Au loading. More labile lattice oxygen and enhanced redox properties at the surface of WO3 modified with Au NPs clearly altered these traditional dehydration catalysts to potential oxidation catalysts. Thus, modification of WO3 with Au is an effective way to expand the MeOH transformation product distribution beyond DME to other useful, oxidized products not typically observed over pure WO3., The authors would like to thank the University of Vermont and the DGICYT in Spain (CTQ2015-68951-C3-1-R, CTQ2012-37925-C3-3-R, and SEV-2012-0267 Severo Ochoa Projects) for financial support and David M. Parker for assistance with catalyst synthesis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nickel oxide supported on porous clay heterostructures as selective catalysts for the oxidative dehydrogenation of ethane

  • Solsona Espriu, Benjamin Eduardo
  • Dejoz, A.
  • Cecilia, J. A.
  • Agouram, S.
  • Torres, V.
  • Jimenez-Jimenez, J.
  • Rodriguez Castellon, E.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
[EN] Porous clay heterostructures (PCH) have shown to be highly efficient supports for nickel oxide in the oxidative dehydrogenation of ethane. Thus NiO supported on silica with a PCH structure shows productivity towards ethylene three times higher than if NiO is supported on a conventional silica. This enhanced productivity is due to the increase in the catalytic activity and especially to the drastic increase in the selectivity to ethylene. Additionally, PCH silica partially modified with titanium in the columns (PCH-Ti) have also been synthesized and used as supports for NiO. An enhanced activity and selectivity to ethylene was found over NiO supported over PCH-Ti compared to the corresponding catalysts supported over the Ti-free PCH. The enhanced catalytic performance has been related to the high dispersion of nickel oxide particles on the support, which leads to a lower reducibility of the nickel oxide, hindering the oxidation of ethane into carbon oxides. More interestingly, the particle morphology plays an important role on the catalyst selectivity since a higher distortion of the NiO crystal lattice parameter meant an enhanced selectivity to ethylene., The authors would like to acknowledge the DGICYT in Spain (CTQ2012-37925-C03-1, CTQ2012-37925-C03-2 and CTQ2012-37925-C03-3) and the FEDER for financial support. We also thank the University of Valencia and SCSIE-UV for assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxidative dehydrogenation of ethane: A study over the structure and robustness of Ni-W-O catalysts

  • Agouram, S.
  • Dejoz, A.
  • Ivars Barceló, Francisco
  • Vazquez, I.
  • Solsona, B.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] The robustness of one selected Ni-W-O catalyst has been studied in the oxidative dehydrogenation of ethane. This catalyst initially deactivates for the first 10 h online decreasing 15% of its catalytic activity compared to its initial stable catalytic activity. However from 10 to 60 h online the catalytic activity keeps almost stable. On the other hand, it has been shown that the Ni-W-O catalyst cannot tolerate an oxygen-free atmosphere (C-2 and He) as nickel oxide is transformed into metallic nickel. Methane and hydrogen as well as abundant coke were formed on the surface of the catalyst in these O-free conditions. However a re-calcination in air leads to the removal of coke, the catalytic performance in the oxidative dehydrogenation of ethane being almost completely restored., Financial support from DGICYT in Spain (Projects CTQ2012-37925-C03-01 and CTQ2012-37925-C03-03) is gratefully acknowledged. The authors also want to thank the SCSIE, University of Valencia, for providing HRTEM facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic behavior of NaV6O15 bronze for partial oxidation of hydrogen sulfide

  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Rodriguez-Castellon, E.
  • Garcia-Gonzalez, E.
[EN] Na-containing V2O5 materials have been prepared hydrothermally from gels with Na/V ratios of 0.02-0.26, and calcined at 500 degrees C. The calcined samples have been characterized and tested as catalysts in the partial oxidation of H2S to elemental sulfur. At low Na-contents, V2O5 and NaV6O15 bronze are formed, with the NaV6O15/V2O5 ratio increasing with the Na-content. Pure NaV6O15 bronze is mainly formed from gels containing a Na/V ratio of 0.18. However, NaV6O15 and Na1.164V3O8 are formed from gels with Na/V ratio higher than 0.35. NaV6O15 based catalyst shows high conversion for the oxidation of H2S with a high selectivity into elemental sulfur. These catalysts are more active and stable than pure or Na-doped V2O5 catalysts. V4O9 is observed after reaction in both pure Na-doped V2O5 catalysts but also in NaV6O15/V2O5 mixed catalysts. However, no changes in the NaV6O15 crystalline structure are observed in the Na-promoted catalysts. Accordingly, NaV6O15 crystalline phase is stable for several hours of catalysisat a difference with V2O5. The active sites in V-containing vanadium catalysts are probably V5+-O-V4+ pairs as previously proposed for V4O9 crystalline phase. The best catalytic performances were achieved on V2O5-NaV6O15 mixtures which are transformed into V4O9-NaV6O15 mixtures during the catalytic tests. These catalytic results could be due to the intrinsic physical properties of both phases but also because of the optimal dispersion obtained in the synthesis procedure. (C) 2014 Elsevier B.V. All rights reserved., The authors would like to thank the DGICYT in Spain (Projects CTQ2012-37925-C03-01, CTQ2012-37925-C03-03 and MAT2010-19837-C06-05) for financial support.