Pasar al contenido principal

CATALIZADORES PARA LA ENERGIA Y EL MEDIOAMBIENTE: OPTIMIZACION DE PROCESOS CATALITICOS DE OXIDACION PARA LA OBTENCION DE HIDROGENO Y OLEFINAS Y LA ELIMINACION DE VOCS.

CTQ2012-37925-C03-02

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSITAT DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Porous clays heterostructures as supports of iron oxide for environmental catalysis

  • Sanchis Martinez, Rut
  • Cecilia,J.A.
  • Vazquez, Isabel
  • Dejoz, Ana
  • Rodriguez-Castellon, E.
  • Solsona Espriu, Benjamin Eduardo
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Porous Clays Heterostructures (PCH) from natural pillared clays (bentonite with a high proportion of montmorillonite) have been used as supports of iron oxide for two reactions of environmental interest: i) the elimination of toluene (a representative compound of one of the most toxic subsets of volatile organic compounds, aromatics) by total oxidation and ii) the selective oxidation of H2S to elemental sulfur. For both reactions these catalysts have resulted to be remarkably more efficient than similar catalysts prepared using conventional silica as a support. Thus, in the total oxidation of toluene it has been observed that the catalytic activity obtained using siliceous PCH is two orders of magnitude higher than that with conventional silica. The catalytic activity has shown to be dependant of the capacity of the support for dispersing iron oxide in a way that the higher the dispersion of iron oxide on the surface of the support, the higher is the activity. In the case of the selective oxidation of H2S to S both higher catalytic activity and higher selectivity to S have been observed using siliceous porous clays heterostructures than using conventional silica. Highly dispersed FeOx species have been shown as highly selective towards elemental sulfur whereas more aggregated FeOx species favour the formation of sulphur oxides decreasing the selectivity to S. Analyses of the surface by XPS have shown the predominance of sulfate species in the catalysts presenting low selectivity to elemental sulfur., The authors would like to acknowledge the DGICYT in Spain (CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R, CTQ2012-37925-C03-2, CTQ2012-37925-C03-3 and CTQ2012-37984-C02-01) and FEDER for financial support. We also thank the University of Valencia for funding (UV-INV-AE-16-484416) and SCSIE-UV for assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimizing both catalyst preparation and catalytic behaviour for the oxidative dehydrogenation of ethane of Ni-Sn-O catalysts

  • Solsona Espriu, Benjamin Eduardo
  • Agouram, Said
  • Dejoz, Ana
  • Vázquez, Maria Isabel
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] Bulk Ni-Sn-O catalysts have been synthesized, tested in the oxidative dehydrogenation of ethane and characterized by several physicochemical techniques. The catalysts have been prepared by evaporation of the corresponding salts using several additives in the synthesis gel, i.e. ammonium hydroxide, nitric acid, glyoxylic acid or oxalic acid, in the synthesis gel. The catalysts were finally calcined at 500 degrees C in air. Important changes in the catalytic behaviour have been observed depending on the additive. In fact, an important improvement in the catalytic performance is observed especially when some additives, such as glyoxylic or oxalic acid, are used. Thus the productivity to ethylene multiplies by 6 compared to the reference Ni-Sn-O catalyst if appropriate templates are used, and this is the result of an improvement in both the catalytic activity and the selectivity to ethylene. This improved performance has been explained in terms of the decrease of the crystallite size (and the increase in the surface area of catalyst) as well as the modification of the lattice parameter of nickel oxide., The authors would like to acknowledge the DGICYT in Spain (CTQ2015-68951-C3-1-R and CTQ2012-37925-C03-2) for financial support. We also thank the University of Valencia and SCSIE-UV for assistance
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Total oxidation of VOCs on mesoporous iron oxide catalysts: soft chemistry route versus hard template method

  • Solsona Espriu, Benjamin Eduardo
  • Garcia, T.
  • Sanchis Martinez, Rut
  • Moreno, M.
  • Rodríguez-Castellon, Enrique
  • Agouram, Said
  • Dejoz, Ana
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A comparative study on the total oxidation of volatile organic compounds, VOCs, on mesoporous iron oxide catalysts prepared by soft chemistry route versus those achieved by hard template method, The authors would like to acknowledge the DGICYT in Spain (CTQ2012-37925-C03-1, CTQ2012-37925-C03-2, CTQ2012-37925-C03-3 and CTQ2012-37984-C02-01) and FEDER for financial support. We also thank the University of Valencia and SCSIE-UV for assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ferric sludge derived from the process of water purification as an efficient catalyst and/or support for the removal of volatile organic compounds

  • Sanchis, Rut
  • Dejoz, Ana
  • Vázquez, Isabel
  • Vilarrasa-García, Enrique
  • Jiménez-Jiménez, José
  • Rodríguez-Castellón, Enrique
  • Solsona, Benjamín
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Ferric chloride solutions are used as coagulants or flocculants in water treatment operations for human consumption. This treatment produces large amounts of clay-type solids formed mainly of montmorillonite with iron oxides and humic substances. This ferric sludge can be used as an efficient catalyst for the removal of volatile organic compounds (VOCs) by total oxidation. This waste isolated in the purification process has been activated by calcinations in air, characterized by several physicochemical techniques and employed as a catalyst for the removal by total oxidation of representative VOCs: toluene, propane and mixtures of toluene/propane with or without water. This ferric sludge has shown a catalytic activity one order of magnitude higher than that of a commercial iron oxide. This high activity has been related to the composition of the sludge (as it contains active metal oxides such as oxides of iron and manganese) and to the porous structure (leading to a reasonably high surface area). Moreover, it can be also used as a support for platinum, showing comparable (or even higher) catalytic activity than a similar platinum catalyst supported on conventional gamma-alumina., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R and CTQ2015-68951-C3-3-R. Authors from UV thank the University of Valencia (UV-INV-AE16-484416 project) and MINECO (MAT2017-84118-C2-1-R project) for funding. Finally, authors thank the Electron Microscopy Service of SCSIE of Universitat de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

NiO diluted in high surface area TiO2 as efficient catalysts for the oxidative dehydrogenation of ethane

  • Sanchis, R.
  • Delgado-Muñoz, Daniel
  • Agouram, S.
  • Vázquez, M. I.
  • Rodriguez-Castellon, E.
  • Solsona, B.
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Catalysts consisting of NiO diluted in high surface area TiO2 can be as efficient in the oxidative dehydrogenation of ethane as the most selective NiO-promoted catalysts reported previously in the literature. By selecting the titania matrix and the NiO loading, yields to ethylene over 40% have been obtained. In the present article, three different titanium oxides (TiO2) have been employed as supports or diluters of nickel oxide and have been tested in the oxidative dehydrogenation of ethane to ethylene. All TiO2 used present anatase as the main crystalline phase and different surface areas of 11,55 and 85 m(2) g(-1). It has been observed that by selecting an appropriate nickel loading and the titanium oxide extremely high selectivity towards ethylene can be obtained. Thus, nickel oxide supported on TiO2 with high surface areas (i.e. 55 and 85 m(2) g(-1)) have resulted to give the best catalytic performance although the optimal nickel loading is different for each case. The optimal catalyst has been obtained for NiO-loadings up to 5-10 theoretical monolayers regardless of the TiO2 employed. Free TiO2 is inactive whereas unsupported NiO is active and unselective (forming mainly carbon dioxide) and, therefore, unmodified NiO particles have to be avoided in order to obtain the optimal catalytic performance. The use of low surface area titania (11 m(2) g(-1)) have led to the lowest selectivity to olefin due to the presence of an excess of free NiO particles. (C) 2017 Elsevier B.V. All rights reserved., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R and SEV-2012-0267 Projects for financial support. D.D. also thanks Severo Ochoa Excellence fellowship (SVP-2014-068669). We also thank the University of Valencia (UV-INV-AE-16-484416 project) and SCSIE-UV for assistance
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Support effects on NiO-based catalysts for the oxidative dehydrogenation (ODH) of ethane

  • Delgado-Muñoz, Daniel
  • Sanchís, R.
  • Cecilia, J. A.
  • Rodríguez-Castellón, E.
  • Caballero, A.
  • Solsona, B.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] We report on the effect of NiO-support interactions on the chemical nature of Ni species in a series of supported NiO catalysts for the ODH of ethane. SiO2, TiO2-anatase, a high surface area TiO2 and a porous clay hetero-structure (PCH) with TiO2 and SiO2 pillars were used as supports, which led to a selectivity to ethylene in the range 30-90% over supported NiO catalysts. The catalysts were characterized by means of XRD, N-2-Adsorption, H-2-TPR, XPS and in situ (under H-2 reductive atmosphere) and ex situ XAS spectroscopy. The catalytic performance of supported materials is discussed in terms of their reducibility and specific reduction kinetics, but also taking into account the specific chemical nature of Ni species on each catalyst. The influence of the particle size and the presence of Ni and O vacancies on the catalytic performance in the ODH of ethane is inferred., Authors would like to thank the DGICYT in Spain CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R, CTQ2012-37925-C03-2 and ENE2017-88818-C2-1-R. Also authors want to acknowledge the ALBA Synchrotron Light Source (Project ID: 2015021258 at CLAESS beamline). Authors from ITQ thank Project SEV-2016-0683 for financial support. D. D. also thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). Authors from UV thank the University of Valencia (UV-INV-AE16-484416 project) and MINECO (MAT2017-84118-C2-1-R project) for funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nickel oxide supported on porous clay heterostructures as selective catalysts for the oxidative dehydrogenation of ethane

  • Solsona Espriu, Benjamin Eduardo
  • Dejoz, A.
  • Cecilia, J. A.
  • Agouram, S.
  • Torres, V.
  • Jimenez-Jimenez, J.
  • Rodriguez Castellon, E.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
[EN] Porous clay heterostructures (PCH) have shown to be highly efficient supports for nickel oxide in the oxidative dehydrogenation of ethane. Thus NiO supported on silica with a PCH structure shows productivity towards ethylene three times higher than if NiO is supported on a conventional silica. This enhanced productivity is due to the increase in the catalytic activity and especially to the drastic increase in the selectivity to ethylene. Additionally, PCH silica partially modified with titanium in the columns (PCH-Ti) have also been synthesized and used as supports for NiO. An enhanced activity and selectivity to ethylene was found over NiO supported over PCH-Ti compared to the corresponding catalysts supported over the Ti-free PCH. The enhanced catalytic performance has been related to the high dispersion of nickel oxide particles on the support, which leads to a lower reducibility of the nickel oxide, hindering the oxidation of ethane into carbon oxides. More interestingly, the particle morphology plays an important role on the catalyst selectivity since a higher distortion of the NiO crystal lattice parameter meant an enhanced selectivity to ethylene., The authors would like to acknowledge the DGICYT in Spain (CTQ2012-37925-C03-1, CTQ2012-37925-C03-2 and CTQ2012-37925-C03-3) and the FEDER for financial support. We also thank the University of Valencia and SCSIE-UV for assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Insights into the catalytic production of hydrogen from propane in the presence of oxygen: cooperative presence of vanadium and gold catalysts

  • Garcia, T.
  • Lopez, J. M.
  • Dejoz, A.
  • Vazquez, M. I.
  • Solsona, B.
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Sanchis, R.|||0000-0002-5495-3339
[EN] H-2 and propylene can be obtained from propane and oxygen in defect using appropriate catalysts. Meanwhile propylene is formed from propane via oxidative or non-oxidative dehydrogenation, molecular hydrogen can be obtained from several reactions such as propane dehydrogenation, coke formation and water gas shift. It has been observed that a gold catalyst hardly activates propane and no H-2 was detected, whereas using vanadium oxide a relatively high concentration of propylene and H-2 was obtained. Interestingly, the simultaneous use of vanadium oxide and gold has meant a higher hydrogen production, higher in a 40% than that of the catalyst containing only vanadium oxide. This performance has been. related to the capacity of gold to activate CO in the water gas shift reaction. (C) 2015 Elsevier B.V. All rights reserved., The authors would like to acknowledge the DGICYT in Spain (CTQ2012-37925-C03-1, CTQ2012-37925-C03-2 and CTQ2012-37984-C02-01) for financial support We also thank the University of Valencia and SCSIE-UV for assistance. J.M. Lopez would also like to thank Spanish MICINN and CSIC for funding his Ramon y Cajal contract (RYC-2009-04483).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Promoted NiO catalysts for the oxidative dehydrogenation of ethane

  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Solsona Espriu, Benjamin Eduardo
  • Grasselli, Robert K.
Metal oxide promoted NiO catalysts with a Ni/(Me + Ni) atomic ratio 0.92 have been investigated for the oxidative dehydrogenation of ethane. These materials have been characterized by several techniques (N-2-adsorption, X-ray diffraction, X-ray photoelectron spectroscopy and Fourier transformed infrared spectroscopy of adsorbed CO and ethylene). The nature of surface sites is strongly influenced by the valence and the acid/base characteristics of the metal oxide promoters, which have a great impact on the selectivity to ethylene. Accordingly, a clear correlation between selectivity to ethylene and the valence of the promoter has been observed in the present work. Additionally, the acidity of the catalyst also enhances the selectivity to ethylene., The Spanish authors would like to thank the DGICYT in Spain (Project CTQ2012-37925-C03-1 and CTQ2012-37925-C03-2) for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Promoting deoxygenation of bio-oil by metal-loaded hierarchical ZSM-5 zeolites

  • Veses Roda, Alberto
  • Puértolas Lacambra, Begoña
  • López Sebastián, José Manuel
  • Callén Romero, M. Soledad
  • Solsona, Benjamín
  • García Martínez, Tomás
3 Figuras.- 5 tablas.-1 Esquema.- This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Sustainable Chemistry & Engineering, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see https://doi.org/10.1021/acssuschemeng.5b01606 ”, The catalytic upgrading of crude bio-oils obtained through the pyrolysis of lignocellulosic biomass remarkably improves the properties of the final bio-oil. It has been demonstrated that the impregnation of hierarchically structured ZSM-5 zeolites with metal cations (Sn, Cu, Ni or Mg) promotes oxygen removal. Remarkably, the Mg-loaded hierarchical zeolite has led to the best fuel characteristics, achieving the greatest reduction in the oxygen-content and the lowest acidity. The promotion of ketonization reactions of acids with aldehydes to produce ketones seems to be favored over the Lewis acid sites created after incorporation of Mg cations at the ion exchange sites. A slightly lower deoxygenation rate is obtained for Cu-loaded hierarchical ZSM-5 zeolite. However, some subtle differences are identified. The most significant feature is the remarkable amount of evolved CO observed in the gas fraction. Thus, it could be assumed that decarbonylation of acids to aldehydes at Cu cations incorporated at ion exchange positions seems to be the prevalent deoxygenation reaction for this solid. Similarly, the preferential mechanism for O-removal using hierarchically structured Ni and Sn-ZSM-5 zeolites derived catalysts seems to proceed through decarbonylation and decarboxylation reactions at the metal acid Lewis sites. Although a prevalent reaction mechanism could not be identified, lower cation incorporation at ion exchange positions could explain the inferior deoxygenation rate. In all the cation-loaded hierarchical zeolites, the incorporation of metallic species at the ion exchange sites decreases the production of desired aromatics and this is linked with a lower amount of Brønsted acid sites., Authors thank to Spanish MINECO and European Union FEDER funds for providing support for this work (projects CTQ2012-37984-C02-01 and CTQ2012-37925-C03-02)., Peer reviewed