Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

V- and Nb-containing tungsten bronzes catalysts for the aerobic transformation of ethanol and glycerol. Bulk and supported materials

  • La Salvia, N.
  • Delgado-Muñoz, Daniel
  • Ruiz-Rodríguez, Lidia
  • Nadji, L.
  • Massó Ramírez, Amada
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] This work report the applicability of reflux to the synthesis of supported tungsten bronzes (i.e. W-V-O and W-Nb-O), using mesoporous KIT-6 as inert support. For comparison, the corresponding bulk materials prepared by reflux or by hydrothermal synthesis have been also prepared. The catalysts were characterized by several techniques (X-ray diffraction, N-2 adsorption, temperature programmed desorption (NH3), and Raman and FTIR spectroscopies) and tested in the selective aerobic transformation of ethanol and glycerol. These results demonstrate the formation of V- and Nb-containing tungsten oxide bronzes in all of the heat-treated samples (bulk and supported materials), as well as the effective incorporation of metals (V or Nb) in the framework of tungsten bronzes. During the aerobic transformation of ethanol, diethyl ether and ethylene (in Nb-containing catalysts) and acetaldehyde, diethyl ether and ethylene (in V-containing catalysts) were the main reaction products, with very small formation of carbon oxides. During the aerobic transformation of glycerol, acrolein was mainly formed over Nb-containing catalysts, whereas acrylic acid, acrolein and COx were mainly observed over V-containing catalysts. The differences between bulk and supported catalysts have been explained according to changes in their physico-chemical properties: V-containing catalysts presenting both acid and redox sites; and Nb-containing catalysts presenting acid sites. In this way, supported materials seems to be effective in both redox and acid reactions due to the small modifications of the acid characteristics of catalysts., The authors would like to acknowledge the DGICYT (CTQ2015-68951-C3-1-R) and Secretary of State for International Cooperation in Spain (Project AP/040992/11). N.S and D.D thank "Conselho Nacional de Desenvolvimento Cientifico y Tecnologico (CNPq)" in Brasil and Severo Ochoa Excellence Program (SVP-2014-068669) in Spain, respectively, for their fellowships. Authors are also grateful to the Electron Microscopy Service (Universitat Politecnica de Valencia) for facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reflux-synthesized bulk and diluted W-Nb-O mixed oxide bronzes for the valorization of short-chain oxygenates aqueous mixtures

  • Delgado-Muñoz, Daniel
  • La Salvia, N.
  • Fernandez-Arroyo-Naranjo, Alberto
  • Domine, Marcelo Eduardo
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] This work reports the preparation of bulk and KIT-6-diluted W-Nb-O mixed oxide bronzes by a reflux method. The influence of the incorporation of Nb and a mesoporous silica on the physicochemical features of the catalysts is studied. The addition of Nb favors the formation of single-phase oxide bronze structure, with improved Lewis acidity; while the incorporation of KIT-6 gives rise to well-dispersed mixed metal oxide particles on the diluter. These diluted W-Nb-O catalysts present enhanced surface areas and mesopore volumes. The materials have been tested in the valorization of an aqueous model mixture (acetol/propanal/ethanol/acetic acid/water weight ratio of 5/25/10/30/30), through C-C bond formation reactions. The increase in the Lewis nature of surface acid sites stands as the key point to maximize the total organic yield during the reaction (Cs-Cio products). The best catalysts maintain their catalytic behavior after five consecutive uses., Financial support by the Spanish Government (RT12018-099668-B-C21, PGC2018-097277-B-100, and SEV-2016-0683) is gratefully acknowledged. DD and AF-A thank the Severo Ochoa Excellence Program (SVP-2014-068669) and the "La Caixa-Severo Ochoa" Foundation, respectively, for their fellowships. NS thanks "Conselho Nacional de Desenvolvimento Cientifico y Tecnologico (CNPq)" in Brasil. Authors are also grateful to the Electron Microscopy Service (Universitat Politecnica de Valencia) for facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

NiO diluted in high surface area TiO2 as efficient catalysts for the oxidative dehydrogenation of ethane

  • Sanchis, R.
  • Delgado-Muñoz, Daniel
  • Agouram, S.
  • Vázquez, M. I.
  • Rodriguez-Castellon, E.
  • Solsona, B.
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Catalysts consisting of NiO diluted in high surface area TiO2 can be as efficient in the oxidative dehydrogenation of ethane as the most selective NiO-promoted catalysts reported previously in the literature. By selecting the titania matrix and the NiO loading, yields to ethylene over 40% have been obtained. In the present article, three different titanium oxides (TiO2) have been employed as supports or diluters of nickel oxide and have been tested in the oxidative dehydrogenation of ethane to ethylene. All TiO2 used present anatase as the main crystalline phase and different surface areas of 11,55 and 85 m(2) g(-1). It has been observed that by selecting an appropriate nickel loading and the titanium oxide extremely high selectivity towards ethylene can be obtained. Thus, nickel oxide supported on TiO2 with high surface areas (i.e. 55 and 85 m(2) g(-1)) have resulted to give the best catalytic performance although the optimal nickel loading is different for each case. The optimal catalyst has been obtained for NiO-loadings up to 5-10 theoretical monolayers regardless of the TiO2 employed. Free TiO2 is inactive whereas unsupported NiO is active and unselective (forming mainly carbon dioxide) and, therefore, unmodified NiO particles have to be avoided in order to obtain the optimal catalytic performance. The use of low surface area titania (11 m(2) g(-1)) have led to the lowest selectivity to olefin due to the presence of an excess of free NiO particles. (C) 2017 Elsevier B.V. All rights reserved., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R and SEV-2012-0267 Projects for financial support. D.D. also thanks Severo Ochoa Excellence fellowship (SVP-2014-068669). We also thank the University of Valencia (UV-INV-AE-16-484416 project) and SCSIE-UV for assistance
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gas phase dehydration of glycerol to acrolein over WO3-based catalysts prepared by non-hydrolytic sol-gel synthesis

  • Nadji, L.
  • Masso Ramírez, Amada
  • Delgado-Muñoz, Daniel
  • Isaadi, R.
  • Rodríguez-Aguado, E.
  • Rodriguez-Castellon, E.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Solid acid catalysts based on WO3¿SiO2 and WO3¿ZrO2¿SiO2 were prepared by one-pot non-hydrolytic sol¿gel method and tested in the gas phase glycerol dehydration to acrolein. Their structural and textural characteristics were determined by X-ray diffraction (XRD), N2 adsorption, X-ray energy dispersive spectroscopy (XEDS), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). Their acid characteristics were studied by both temperature programmed desorption of ammonia (NH3-TPD) and FTIR of adsorbed pyridine. Under our operating conditions, all the catalysts were active and selective in the transformation of glycerol to acrolein, which was always the main reaction product. The high selectivity to acrolein is achieved on catalysts presenting a higher proportion of Brønsted acid sites. In addition, the role of oxygen in the feed on catalytic performance of these catalysts is also discussed., The authors would like to acknowledge the DGICYT (CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R and SEV-2016-0683) and Secretary of State for International Cooperation in Spain (Project AP/040992/11) and Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships. D. D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). Authors also would like to thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of Phase Composition of Bulk Tungsten Vanadium Oxides on the Aerobic Transformation of Methanol and Glycerol

  • Delgado-Muñoz, Daniel
  • Chieregato, Alessandro
  • Rodríguez-Aguado, E.
  • Rodriguez-Castellon, E.
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Ruiz-Rodríguez, Lidia
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A series of W-V-O catalysts with different m-WO3 and h-WO3 phase contents were hydrothermally synthesized by employing different tungsten, vanadium, and ammonium precursors and characterized by powder XRD, N-2 adsorption, SEM, X-ray energy-dispersive spectroscopy, thermogravimetric analysis, Raman and FTIR spectroscopy, NH3 temperature programmed desorption, H-2 temperature-programmed reduction, and XPS. Finally, the acid/redox properties were analyzed by using aerobic transformation of methanol as a characterization reaction. A correlation between phase composition as well as acid and redox properties was observed, which were correlated to the catalytic performance of the title materials in a one-pot oxydehydration reaction of glycerol. The hexagonal tungsten bronze (h-WO3) phase shows a significantly higher concentration of acid sites than monoclinic m-WO3, so that the acid properties of W-V-O oxides are directly related to the presence of h-WO3 crystals. The presence of a higher concentration of acid sites in V-containing h-WO3 crystals is a key factor to achieve high selectivity to both acrolein and acrylic acid during one-pot glycerol oxydehydration. Also, V sites in h-WO3 show higher selectivity in the consecutive reaction (partial oxidation of acrolein to acrylic acid), while V sites in the m-WO3 phase fundamentally lead to the formation of carbon oxides., The authors acknowledge the DGICYT in Spain, CTQ2015-68951-C3-1-R and CTQ2015-68951-C3-3-R. Authors from ITQ also thank Project SEV-2016-0683 for financial support. D. D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). The research group of Prof. Fabrizio Cavani (University of Bologna, Italy)and Consorzio INSTM (Firenze) are gratefully acknowledged for a PhD grant to A. C. Authors also thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Support effects on NiO-based catalysts for the oxidative dehydrogenation (ODH) of ethane

  • Delgado-Muñoz, Daniel
  • Sanchís, R.
  • Cecilia, J. A.
  • Rodríguez-Castellón, E.
  • Caballero, A.
  • Solsona, B.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] We report on the effect of NiO-support interactions on the chemical nature of Ni species in a series of supported NiO catalysts for the ODH of ethane. SiO2, TiO2-anatase, a high surface area TiO2 and a porous clay hetero-structure (PCH) with TiO2 and SiO2 pillars were used as supports, which led to a selectivity to ethylene in the range 30-90% over supported NiO catalysts. The catalysts were characterized by means of XRD, N-2-Adsorption, H-2-TPR, XPS and in situ (under H-2 reductive atmosphere) and ex situ XAS spectroscopy. The catalytic performance of supported materials is discussed in terms of their reducibility and specific reduction kinetics, but also taking into account the specific chemical nature of Ni species on each catalyst. The influence of the particle size and the presence of Ni and O vacancies on the catalytic performance in the ODH of ethane is inferred., Authors would like to thank the DGICYT in Spain CTQ2015-68951-C3-1-R, CTQ2015-68951-C3-3-R, CTQ2012-37925-C03-2 and ENE2017-88818-C2-1-R. Also authors want to acknowledge the ALBA Synchrotron Light Source (Project ID: 2015021258 at CLAESS beamline). Authors from ITQ thank Project SEV-2016-0683 for financial support. D. D. also thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). Authors from UV thank the University of Valencia (UV-INV-AE16-484416 project) and MINECO (MAT2017-84118-C2-1-R project) for funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the Nature of the Promoter in NiO Catalysts on the Selectivity to Olefin During the Oxidative Dehydrogenation of Propane and Ethane

  • Delgado Muñoz, Daniel
  • Sanchis, Rut
  • Solsona Espriu, Benjamin Eduardo
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A comparative study of the catalytic properties for the oxidation of C2-C3 alkanes and olefins has been carried out over unpromoted and M-promoted NiO catalysts (Me¿=¿K, La, Ce, al, Zr, Sn, Nb). The catalysts have been characterized by several physico-chemical techniques (UV Raman, Visible Raman, FTIR of adsorbed CO and XPS). The characteristics of promoter elements are of paramount importance, since they are able to modify both the nature of the active nickel and the concentration of electrophilic O2¿/O¿ oxygen species. Thus, a relatively high acidity and valence of the promoter oxide (with oxidation state higher than¿+¿3) are necessary to achieve high selectivity to olefins during the oxidative dehydrogenation (ODH) of C2¿C3 alkanes. In addition, an inverse correlation between the selectivity to the corresponding olefin and the concentration of electrophilic oxygen species has been observed, although the selectivity to propene during propane ODH is lower than the selectivity to ethylene achieved during ethane ODH. On the other hand, a very low influence of alkane conversion on the selectivity to the corresponding olefins is observed. This behaviour can be explained by considering that the reaction rate for olefin combustion is lower than the reaction rate for alkane oxidation. However, the comparative study of the oxidation of alkanes and olefins suggest that the differences observed between the ODH of propane and ethane are not related to the reactivity of olefins, but to the different number and reactivity of C¿H bonds in both alkanes. A discussion on the importance of the concentration of active sites and the characteristics of the alkanes fed on the selectivity to olefin during the alkane ODH is also presented., The authors would like to acknowledge the Ministerio de Ciencia, Innovacion y Universidades of Spain (RTl2018-099668-B-C21 and MAT2017-84118-C2-1-R projects) and FEDER. Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tungsten-titanium mixed oxide bronzes: Synthesis, characterization and catalytic behavior in methanol transformation

  • Delgado-Muñoz, Daniel
  • Solsona Espriu, Benjamín Eduardo
  • Zamora Blanco, Segundo
  • Agouram, Said
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Tungsten oxide bronze-based materials show extremely adaptive structural and compositional features that make them suitable for functional properties modulation. Herein we report the preparation of a series of Ti-containing tungsten oxide catalysts presenting a hexagonal tungsten bronze-type structure. The insertion of Ti4+ within the structure (likely in the octahedral framework of the hexagonal tungsten bronze) leads to an increase in the number of strong acid sites, and the disappearance of W5+ surface species found in the undoped tungsten oxide. With the aim of studying the acid-redox properties of the titled catalysts, the catalytic transformation of methanol has been carried out in the presence and the absence of O-2 in the feed. Both catalytic activity and the acid-redox properties of these catalysts are highly dependent on catalyst composition and reaction conditions applied (i.e. in the presence or in the absence O-2 in the feed). Aerobic experiments show the depletion of the redox functionality (i.e. no formaldehyde detected in the products) when Ti4+ is incorporated in the framework (i.e. 100% selectivity to dimethyl ether). On the other hand, all the catalysts show the loss of the redox function and a decrease in the catalytic activity when anaerobic conditions are used. In the absence of oxygen, the catalysts are still active in the dehydration of methanol to dimethyl ether, i.e. they maintain their acid functionality even when oxygen is not present in the feed. The results are discussed in terms of the available surface active sites present in each case., Authors would like to thank DGICYT in Spain for RTI2018-099668-B-C21, CTQ2015-68951-C3-1-R and MAT2017-84118-C2-1-R projects. Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). Finally, authors thank the Electron Microscopy Service of SCSIE of Universitat de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel Sn-Nb-Based Catalysts with Enhanced Acidity and Water Resistance for the Aqueous-Phase Condensation of Light Oxygenated Compounds

  • Fernandez-Arroyo-Naranjo, Alberto
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Domine, Marcelo Eduardo
[EN] Upgrading of light oxygenated compounds present in aqueous effluents obtained from primary treatments of biomass (pyrolysis, fermentation) is imperative in the current bio-refinery business model development. In this work, efficient and water-resistant catalysts are needed for the valorization of these residual streams via aqueous-phase condensation reactions. Based on our previous results, where Nb-based materials stand as promissory catalysts, the activity of tin-niobium mixed oxides in the condensation of light oxygenates is here studied using a representative aqueous model mixture including acetic acid, propanal, acetol, and ethanol. Sn-Nb mixed oxides preparation via co-precipitation allow obtaining homogenous rutile-phase materials with enhanced textural and acid properties compared to commercial catalysts or Sn-Nb materials synthesized by different procedures. This work displays the potential of Sn-Nb rutile-phase catalysts with inherent hydrophobic characteristics for the conversion of light oxygenated compounds present in bio-derived aqueous effluents into hydrocarbons and aromatics useful for liquid fuel applications. These pseudo-crystalline Sn-Nb materials show remarkable condensation activity by exposing Lewis acid sites capable of activating carbonyl compounds even in the presence of large amounts of water and organic acids. Therefore, these novel acid catalysts exhibit outstanding performance and stability in complex acidic aqueous environment compared to other Sn-Ti and Ce-Zr mixes oxides broadly used in these processes., Financial support by the Ministerio de Ciencia e Innovacion of Spain (PGC2018-097277-B-I00 and PID2021-125897OB-I00) is gratefully acknowledged. A. F-A. thanks La Caixa-Severo Ochoa Foundation and the Severo Ochoa Excellence Program (SVP-2014-068669) for the PhD fellowship. Authors also thank Miriam Parreno-Romero and the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tungsten-niobium oxide bronzes: a bulk and surface structural study

  • Delgado-Muñoz, Daniel
  • Trunschke, Annette
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Materials from the WO3-Nb2O5 system, presenting bronze-type crystal structures, display outstanding functional properties for several applications as thermoelectric materials, lithium-ion battery electrodes, or catalysts. In this work, a series of W-Nb-O oxide bronzes have been synthesized by the hydrothermal method (with Nb/(W + Nb) ratios in the range of 0-1). A combination of bulk and surface characterisation techniques has been applied to get further insights into: (i) the effect of thermal treatments on as-prepared materials and (ii) the surface chemical nature of W-Nb-O oxide bronzes. Thermal treatments promote the following structural changes: (i) loss of emerging long-range order and (ii) the elimination of NH4+ and H2O species from the structural channels of the as-synthesized materials. It has been observed that W-Nb-O bronzes with Nb at% of ca. 50% are able to retain a long-range order after heat-treatments, which is attributed to the presence of a Cs-0.5[W2.5Nb2.5O14]-type structure. Increasing amounts of Nb 5T in the materials (i) promote a phase transition to pseudocrystalline phases ordered along the c-axis; (ii) stabilize surface W s. species (elucidated by XPS); and (iii) increase the proportion of surface Lewis acid sites (as determined by the FTIR of adsorbed CO). Results suggest that pseudocrystalline oxides (with a Nb at% >= 50%) are closely related to NbO2 pentagonal bipyramid-containing structures. The stabilisation of Lewis acid sites on these pseudocrystalline materials leads to a higher yield of heavy compounds, at the expense of acrolein formation, in the gas-phase dehydration of glycerol., The authors would like to acknowledge the Ministerio de Ciencia, Innovacion y Universidades in Spain for the financial support (RTI2018-099668-B-C21 and SEV-2016-0683 projects), and the Electron Microscopy Service at Universitat Politecnica de Valencia for providing facilities and technical support. D. D. also thanks Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxidative dehydrogenation of ethane on diluted or promoted nickel oxide catalysts: Influence of the promoter/diluter

  • Delgado, D.
  • Solsona, B.
  • Sanchis, R.
  • Rodríguez-Castellón, E.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Ti- and Nb- containing NiO catalysts have been synthesized by two different preparation methods: i) by precipitation (Me-Ni-O oxides, Me = Nb or Ti), in order to prepare promoted NiO catalysts; and ii) by wet impregnation on TiO2 or NbOx supports, in order to prepare diluted/supported NiO catalysts. The catalysts have been also characterized and tested in the oxidative dehydrogenation of ethane. The catalytic performance of Ti- and Nb-promoted catalysts strongly depends on the composition, although in both cases the optimal one is found at similar Ti or Nb loadings (ca. 90 wt% NiO), showing similar ethylene selectivity in the ODH of ethane (ca. 90% at 10¿20% ethane conversion). However, in the case of diluted catalysts, the catalytic behavior of Ti- and Nb- containing catalysts is drastically different. Then, over TiO2-diluted NiO catalyst, the highest selectivity to ethylene (ca. 90% selectivity) is achieved at NiO loading of 20 wt.%. However, over Nb2O5-diluted NiO catalyst, selectivity to ethylene was lower than 70%. A discussion on the characteristics of selective catalysts is done. In this case, the best catalysts must present a low concentration of free NiO and TiO2 or Nb2O5 phases, maximizing the Ni-O-Ti or Ni-O-Nb interaction. Interestingly, this takes place at different NiO loading depending on the preparation method and the nature of promoted/diluter. The low selectivity to ethylene achieved by NiO diluted with Nb2O5 has been related to the low interaction of NiO with the surface of Nb2O5, which hinders the elimination of unselective electrophilic O- species., The authors would like to acknowledge the DGICYT in Spain (CRTl2018-099668-B-C21 and RTl2018-099668-B-C22 and MAT2017-84118-C2-1-R projects). Authors from ITQ also thank Project SEV-20160683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Catalytic valorization of natural gas and biomass-derived feedstocks by metal oxides

  • Delgado Muñoz, Daniel
[ES] La presente tesis doctoral se sitúa en el marco de la actual transición energética, que plantea la sustitución progresiva de materias primas de origen fósil por fuentes renovables, tanto para la obtención de productos químicos como para la producción de combustibles. En este contexto de transición paulatina a las renovables, y teniendo en cuenta los últimos pronósticos, las fuentes fósiles (fundamentalmente gas natural) y derivados de la biomasa, jugarán un papel fundamental durante el cambio. Se ha llevado a cabo un estudio sobre el empleo de óxidos metálicos (basados en bronces de wolframio o en óxido de níquel), como catalizadores para: i) la transformación de derivados de biomasa: de glicerol a acroleína/ácido acrílico; y de compuestos oxigenados de cadena corta presentes en efluentes acuosos (procedentes de tratamientos de extracción de bio-aceites de pirolisis) a combustibles; y ii) la transformación de componentes del gas natural, concretamente la obtención de etileno a partir de etano, mediante deshidrogenación oxidativa (ODH). El trabajo se presenta desde una perspectiva de la química de materiales, haciendo hincapié en las propiedades fisicoquímicas de los distintos sistemas catalíticos, empleando técnicas de caracterización convencionales e in situ, además de reacciones modelo (transformación de metanol y etanol), con el objetivo de entender las funciones catalíticas presentes en cada caso. Tanto para la transformación de glicerol en fase gas, como para la valorización de mezclas acuosas de compuestos oxigenados de cadena corta, se han utilizado catalizadores basados en bronces de wolframio. Se ha tratado de poner de manifiesto la gran versatilidad composicional y estructural (con el consiguiente control de las propiedades funcionales), que presentan este tipo de materiales. En este sentido, las propiedades ácidas y redox de catalizadores W-V-O pueden ser moduladas, para una misma concentración de vanadio, mediante el control de la relación de fases cristalinas (hexagonal y monoclínica) del óxido de wolframio. Este efecto se ha estudiado empleando la transformación aeróbica de metanol como reacción "test", y tiene una gran influencia en la deshidratación oxidativa de glicerol a ácido acrílico. A su vez, mediante la sustitución isomórfica de wolframio por niobio (en el sistema WO3-Nb2O5) es posible controlar la relación de centros ácidos de tipo Brönsted y Lewis en la superficie de los materiales. Por un lado, los catalizadores con una alta relación Brönsted/Lewis se han mostrado más efectivos en la deshidratación de glicerol a acroleína, mientras que los catalizadores con altas concentraciones de centros de tipo Lewis presentan altos rendimientos a productos de condensación de compuestos oxigenados de cadena corta. Adicionalmente se han estudiado las diferencias entre catalizadores (bien óxidos mixtos W-V-O o W-Nb-O) preparados mediante un método hidrotermal o mediante reflujo, así como el efecto de la utilización de un soporte mesoporoso (KIT-6), sobre sus propiedades catalíticas en la transformación aeróbica en fase gaseosa de etanol y glicerol. Finalmente, en lo que concierne a la transformación de componentes del gas natural, se han empleado materiales basados en óxido de níquel (soportado sobre distintos óxidos y/o promovido con distintos metales) como catalizadores para la ODH de etano. En este caso el estudio se ha centrado fundamentalmente en dilucidar los efectos de promotores y soportes en la naturaleza y propiedades fisicoquímicas del óxido de níquel, los cuales dan lugar a un cambio drástico en sus propiedades catalíticas. Así, se ha observado que modificando la reducibilidad y las características superficiales del óxido de níquel es posible transformar un catalizador muy poco selectivo en la ODH de etano (como es el NiO, con una selectividad a etileno del 30 %) en uno de los catalizadores más selectivos para llevar a cab, [CA] Aquesta tesi doctoral es situa dins del marc de l'actual transició energètica, la qual planteja la substitució progressiva de les primeres matèries d'origen fòssil per fonts renovables, tant per a l'obtenció de productes químics com per a la producció de combustibles. En aquest context de transició gradual a les renovables, i tenint en compte els últims pronòstics, les fonts fòssils (principalment el gas natural) i els derivats de la biomassa, exerciran un paper fonamental durant aquest canvi. S'ha dut a terme un estudi sobre la utilització d'òxids metàl·lics (basats en bronzes de wolframi o en òxid de níquel), com a catalitzadors per a: i) la transformació de derivats de la biomassa: de glicerol a acroleïna/àcid acrílic; i de compostos oxigenats de cadena curta presents en efluents aquosos (procedents de tractaments d'extracció de bio-olis de la piròlisi) a combustibles; i ii) la transformació de components del gas natural, concretament l'obtenció d'etilè a partir d'età, mitjançant la deshidrogenació oxidativa. El treball es presenta des del punt de vista de la química de materials, posant l'accent en les propietats fisicoquímiques dels diferents sistemes catalítics, utilitzant tècniques de caracterització convencionals i in situ, a més de reaccions model, amb l'objectiu d'entendre les funcions catalítiques presents en cadascun dels casos. Tant per a la transformació del glicerol en fase gasosa com per a la valorització de les mescles aquoses de compostos oxigenats de cadena curta, s'han utilitzat catalitzadors basats en bronze de wolframi. S'ha intentat posar de manifest la gran versatilitat de composicions i estructures (amb el conseqüent control de les propietats funcionals) que presenten aquest tipus de materials. En aquest sentit, les propietats àcides i redox dels catalitzadors de W - V - O poden ser modulades, per a una mateixa concentració de vanadi, mitjançant el control de la relació de fases cristal·lines (hexagonal i monoclínica) de l'òxid de wolframi. Aquest efecte s'ha estudiat utilitzant la transformació aeròbica de metanol com a reacció "test", i presenta una gran influència en la deshidratació oxidativa de glicerol a àcid acrílic. Al mateix temps, mitjançant la substitució isomòrfica de wolframi per niobi (en el sistema WO3 - Nb2O5), és possible controlar la relació de centres àcids de tipus Brönsted i Lewis en la superfície dels materials. Per una part, els catalitzadors que presenten una relació Brönsted / Lewis alta s'han mostrat més efectius en la deshidratació de glicerol a acroleïna, mentre que els catalitzadors amb unes altes concentracions de tipus Lewis presenten alts rendiments a productes de condensació de compostos oxigenats de cadena curta. Addicionalment, s'han estudiat les diferències entre catalitzadors (ja siguin òxids mixtos W-V-O o W-Nb-O) preparats mitjançant un mètode hidrotermal o mitjançant un mètode de reflux, així com l'efecte que presenta la utilització d'un suport mesoporós (KIT-6), sobre les seves propietats catalítiques en la reacció de transformació aeròbica en fase gasosa d'etanol i glicerol. Finalment, pel que fa referència a la transformació de components del gas natural, s'han utilitzat materials basats en òxid de níquel (suportat sobre diferents òxids i/o promoguts amb diferents metalls) i catalitzadors per a la deshidrogenació oxidativa d'età. En aquest cas, l'estudi s'ha focalitzat principalment en dilucidar els efectes de promotors i suports en la naturalesa i propietats fisicoquímiques de l'òxid de níquel, els quals impliquen un canvi dràstic en les seves propietats catalítiques. Així doncs, s'ha observat que modificant la reductibilitat i les característiques superficials de l'òxid de níquel és possible transformar un catalitzador molt poc selectiu en la deshidrogenació oxidativa de l'età (com és el cas del NiO, amb una selectivitat a l'etilè del 30%) en un dels cata, [EN] The present doctoral thesis is set within the scope of the current energy transition, which considers the progressive substitution of non-renewable fossil sources by renewable feedstocks for the production of chemicals and fuels. In this context of gradual transition, and according to recent energy outlooks, fossil sources (especially natural gas) and biomass feedstocks will play a key role during the shift. A study on the use of metal oxides (based on tungsten bronzes or nickel oxides) as catalysts for different reactions has been conducted. Particularly, they have been studied as catalytic materials for: i) the transformation of biomass-derived feedstocks: glycerol transformation into acrolein/acrylic acid, and the transformation of short-chain oxygenates present in aqueous effluents (derived from extraction processes of pyrolysis bio-oils) into fuels; and ii) the valorization of natural gas components, i.e. the transformation of ethane into ethylene by oxidative dehydrogenation. The work is presented from a materials chemistry perspective, emphasizing the physicochemical characteristics of the different catalytic systems by using conventional and in situ characterization techniques and model reactions (gas phase methanol and ethanol transformation); with the aim of understanding the specific catalytic functionalities present in each case. For both gas phase glycerol transformation and the valorization of short-chain oxygenates aqueous mixtures, catalyst based on tungsten oxide bronzes have been used. The compositional and structural versatility of this structural types (with the subsequent control of their functional properties) will be highlighted. In this sense, the acid-redox properties of W-V-O catalysts can be modulated by controlling the crystalline phase composition in the materials (i.e. hexagonal and monoclinic polymorphs of tungsten oxide) at a fixed V concentration. This effect has been studied by using the gas-phase aerobic transformation of methanol as a surface test reaction. The concentration of the hexagonal and monoclinic polymorphs in the catalysts has also an important influence in the gas-phase transformation of glycerol into acrylic acid. Also, it is possible to control the Brönsted/Lewis acid nature of the surface by the isomorphic substitution of Nb for W in WO3-Nb2O5 system. On the one hand, catalysts showing a higher proportion of Brönsted acid sites are more effective in the glycerol dehydration to acrolein. On the other hand, materials with a higher concentration of Lewis acid sites display high yields to condensation products in the aqueous phase valorization of short chain oxygenates. Additionally, the differences between W-V-O and W-Nb-O catalysts prepared by both reflux and hydrothermal methods have been studied. Also the effect of adding a mesoporous KIT-6 silica as support on the catalytic performance in the gas phase transformation of ethanol and glycerol will be underlined. Considering the transformation of natural gas components, nickel oxide-based materials were chosen (either supported on different oxides and/or promoted with different metals) to perform the oxidative dehydrogenation (ODH) of ethane. In this case the study has been focused on elucidating the effects of both promoters and supports on the nature and physicochemical features of nickel oxide, which lead to a drastic change in the catalytic behavior of these materials. This way, it has been observed that by the modification of the reducibility and the chemical nature of nickel oxide, it is possible to transform an apparently non-selective catalyst in the ODH of ethane (like NiO, showing a selectivity to ethylene of ca. 30 %) into one of the most selective catalysts reported in the literature (presenting a selectivity to ethylene of ca. 90 %)., También me gustaría agradecerle al Prof. Avelino Corma, investigador principal del proyecto SEV-2012-0267, a través del cual he podido realizar mi tesis doctoral enel Instituto de Tecnología Química (SVP-2014-068669).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Redox and Catalytic Properties of Promoted NiO Catalysts for the Oxidative Dehydrogenation of Ethane

  • Delgado-Muñoz, Daniel
  • SOLSONA ESPRIU, BENJAMIN EDUARDO
  • Ykrelef, A.
  • Rodriguez-Gomez, A.
  • Caballero, A.
  • Rodríguez-Aguado, E.
  • Rodriguez-Castellón, E.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] NiO and metal-promoted NiO catalysts (M-NiO, with a M/(M+Ni) atomic ratio of 0.08, with M = Nb, Sn, or La) have been prepared, tested in the oxidative dehydrogenation (ODH) of ethane, and characterized by means of XRD, TPR, HRTEM, Raman, XPS, and in situ XAS (using H-2/He, air or C2H6/He mixtures). The selectivity to ethylene during the ODH of ethane decreases according to the following trend: Nb NiO Sn NiO > La NiO > NiO, whereas the catalyst reducibility (determined by both TPR and XAS using H-2/He mixtures) shows the opposite trend. However, different reducibility and catalytic behavior in the absence of oxygen (ethane/He mixtures) have been observed, especially when comparing Nb- and Sn-promoted NiO samples. These differences can be ascribed mainly to a different phase distribution of the promoter. The results presented here are discussed in terms of the nature of active and selective sites for ODH of ethane in selective and unselective catalysts, but also the role of promoters and the importance of their phase distribution., The authors would like to acknowledge the DGICYT in Spain CTQ2012-37925-C03-2, CTQ2015-68951-C3-1-R, and CTQ2015-68951-C3-3-R. Authors thank European Synchrotron Radiation Facility, ESRF (Project CH-4512; BM25-SpLine Beamlime). Authors from ITQ also thank Project SEV-2016-0683 for financial support. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669). B.S. also thanks UV-INV-AE16-484416. Finally, the authors thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Upgrading of oxygenated compounds present in aqueous biomass-derived feedstocks over NbOx-based catalysts

  • Fernandez-Arroyo-Naranjo, Alberto
  • Domine, Marcelo Eduardo
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Delgado-Muñoz, Daniel
[EN] The influence of synthesis and post-synthesis procedures of different niobium oxides on their catalytic performance in the aqueous phase condensation of oxygenated compounds is studied. Hydrothermally synthesized niobium oxide with a pseudo-crystalline structure shows enhanced acid properties, surface area and consequently better catalytic activity than Nb2O5 prepared by other synthesis methods. The optimized NbOx-based catalyst also demonstrates higher stability after several reuses compared to the Ce-Zr mixed oxide reference catalyst., Financial support by the Spanish Government (CTQ-2015-67592, CTQ-2015-68951-C3-1, and SEV-2012-0267) is gratefully acknowledged. A. F.-A. and D. D. thank the "La Caixa-Severo Ochoa" Foundation and the Severo Ochoa Excellence Program (SVP-2014-068669), respectively, for their fellowships. Authors also thank the Electron Microscopy Service of Universitat Politecnica de Valencia for their support
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced NiO Dispersion on a High Surface Area Pillared Heterostructure Covered by Niobium Leads to Optimal Behaviour in the Oxidative Dehydrogenation of Ethane

  • Rodríguez-Castellón, Enrique
  • Delgado-Muñoz, Daniel
  • Dejoz, Ana
  • Vázquez, Isabel
  • Agouram, Said
  • Cecilia, Juan A.
  • Solsona, Benjamín
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A Nb-containing siliceous porous clay heterostructure (PCH) with Nb contents from 0 to 30 wt %) was prepared from a bentonite and used as support in the preparation of supported NiO catalysts with NiO loading from 15 to 80 wt %. Supports and NiO-containing catalysts were characterised by several physicochemical techniques and tested in the oxidative dehydrogenation (ODH) of ethane. The characterisation studies on Nb-containing supports showed the presence of well-anchored Nb(5+)species without the formation of Nb(2)O(5)crystals. High dispersion of nickel oxide with low crystallinity was observed for the Nb-containing PCH supports. In addition, when NiO is supported on these Nb-containing porous clays, it is more effective in the ODH of ethane (ethylene selectivity of ca. 90 %) than NiO supported on the corresponding Nb-free siliceous PCH or on Nb2O5(ethylene selectivities of ca. 30 and 60 %, respectively). Factors such as the NiO-Nb(5+)interaction, the NiO particle size and the properties of surface Ni(n+)species were shown to determine the catalytic performance., The authors would like to acknowledge the Ministerio de Ciencia, Innovacion y Universidades of Spain (CRTl2018-099668-B-C21, RTl2018-099668-B-C22 and MAT2017-84118-C2-1-R projects). Authors from ITQ also thank Project SEV-2016-0683 for supporting this research. D.D. thanks MINECO and Severo Ochoa Excellence Program for his fellowship (SVP-2014-068669).