Pasar al contenido principal

PROCESOS CATALITICOS AVANZADOS EN BIORREFINERIA PARA LA PRODUCCION DE COMBUSTIBLES Y PRODUCTOS QUIMICOS RENOVABLES

PID2021-125897OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cascade process for the selective conversion of 5-Hydroxymethylfurfural (HMF) into furan diamines using potassium-doped Ru/C catalyst: Application in gemini surfactant production

  • Hurtado-Cebrián, Beatriz
  • Arias, Karen S.|||0000-0001-5649-7392
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Furan diamines, precursors to ammonium salt gemini surfactants, were synthesized via a one-pot cascade process starting from hydroxymethylfurfural (HMF) and primary amines. The cascade process involves the selective oxidation of HMF to diformylfuran, followed by reductive amination with the amine, using potassium-doped Ru/ C as the sole catalyst. This catalytic system exhibited a turnover frequency (TOF) four times higher than the non-promoted Ru/C catalyst. Temperature-programmed desorption of hydrogen (TPD-H2) experiments revealed that the promoted catalyst had weaker Ru-H interactions compared to the unpromoted system, which enhanced the availability of H species. The catalyst is highly stable and presents a wide scope. Finally, methylation of secondary furan diamines derived from fatty amines resulted in the formation of bis-quaternary ammonium salt gemini surfactants, which exhibited a critical micelle concentration (CMC) in the micromolar range., This work has been funded by the Spanish Ministry of Science and Innovation through the "Severo Ochoa Program" (CEX-2021-001230-S) and the PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by "ERDF A way of making Europe project. B.H. thanks the Severo Ochoa program for predoctoral fellowships. The authors also thank Microscopy Service of UPV for the TEM measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Palladium Nanoparticles Immobilized on the Amine-Functionalized Lumen of Halloysite for Catalytic Hydrogenation Reactions

  • Bedoya, Santiago
  • González-Vera, Daniela
  • Leal-Villarroel, Edgardo
  • Díaz de León, J. N.
  • Pecchi, Gina
  • Torres, Cecilia C.
  • Campos, Cristian H.
  • Domine, Marcelo Eduardo
[EN] Supported Pd-based catalysts have been widely applied in the hydrogenation of specific functional groups. Recent trends have focused on employing Pd-based heterogeneous catalysts supported on inorganic nanotubes, wherein inner surface functionalization modulates both palladium nanoparticle (Pd-NP) dispersion and the interaction between reactants and the catalyst surface, thereby influencing catalytic properties. This study aims to develop a catalytic system using amine-lumened halloysite nanotubes immobilizing Pd-NPs (Pd/HNTA) as catalysts for hydrogenation reactions. The formation of Pd-NPs within the organo-functionalized lumen-modified by 3-aminopropyltrimethoxysilane-is confirmed by transmission electron microscopy (TEM) imaging, which reveals a particle size of 2.2 +/- 0.4 nm. For comparison, Pd-NPs supported on pristine halloysite (Pd/HNTP) were used as control catalysts, displaying a metal particle size of 2.8 +/- 0.8 nm and thereby demonstrating the effect of organic functionalization on the halloysite nanotubes. Both catalysts were employed in the hydrogenation of furfural (FUR) and nitrobenzene (NB) as model reactions. Pd/HNTA demonstrated superior catalytic performance for both substrates, with TOF values of 880 h-1 for FUR and 946 h-1 for NB, and selectivities exceeding 98% for tetrahydrofurfuryl alcohol (THFOH) and aniline (AN), respectively. However, recyclability studies displayed that Pd/HNTA was deactivated at the 10 catalytic cycles during the hydrogenation of FUR, whereas, in the hydrogenation of NB, 5 catalytic cycles were achieved with maximum conversion and selectivity at 360 min. These results revealed that the liquid-phase environment plays a pivotal role in catalyst stability. In the hydrogenation of NB, the coproduction of H2O adversely affects the interaction between the Pd particles and the inner amine-modified surface, increasing the deactivation of the catalyst with reuse. Thus, the Pd/HNTA catalyst holds significant promise for the development of noble-metal-based catalysts and their application in the transformation of other reducible organic functional groups via hydrogenation reaction., The authors would like to thank the ANID project FONDECYT 1231352. M.E. Domine thanks the Spanish government (PID2021-125897OB-I00) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailor-made Al-containing mesostructured catalysts for BTXs production from biomass resources

  • Ferrero, Gabriel O.
  • Elias, Veronica R.
  • Eimer, Griselda A.
  • Idriceanu, Madalina Georgiana
  • Domine, Marcelo Eduardo
[EN] Benzene, toluene, and xylene (BTXs) are the major commodity chemicals serving a wide range of industries with large global economic impact and are currently obtained exclusively from petroleum feedstock. Alternative renewable sources from biomass are raised as a solution to satisfy the pressing needs for a fully sustainable biocommodities industry. For this reason, the chemistry of materials has focused on the synthesis of catalysts that can transform biomass into renewable chemical compounds of interest. In this work, the SBA-15 material was modified with Al to incorporate a specific Br/Le acid sites ratio to make a low-cost tailor-made catalyst for the aromatization reaction of furanic dienes and dienophiles from renewable biomass sources. In order to correlate the catalytic activity of materials with their structure and nature, the solids were characterized by several techniques such as XRD, TEM, ICP, N2 physisorption and FT-IR of adsorbed pyridine. The goal of this work was to maximize the production of p-xylene (PX) by fine-tuning the Al content in SBA-15 and optimizing the reaction conditions. The presence of Lewis (Le) and Br & Oslash;nsted (Br) acid sites in Al-SBA-15 materials with different Al contents was determined and the catalysts were evaluated in the aromatic reaction of 2,5-dimethylfuran with ethylene. The optimal combination of Le sites, to produce the first cycloaddition, and Br sites, for subsequent dehydration, was achieved with the Al(1.28)SBA-15 catalyst. After optimization of main reaction parameters (i. e., pressure, temperature and reagents and catalyst concentrations), a 42 % yield of p-xylene was achieved and maintained even after three consecutive re-cycles of solid catalyst. Finally, the possible extended scope of this catalytic system for producing toluene and trimethylbenzene from the corresponding starting reactants was also evaluated., Financial support by CONICET and CSIC (Spain) through the project COOPB20415, and by the Spanish Government (PGC2018-097277-B-I00 and PID2021-125897OB-I00) funded by MCIN/AEI/10.13039/501100011033 and FEDER funds are gratefully acknowledged. Authors also thank Miriam Parreno-Romero and the Electron Microscopy Service of Universitat Polite`cnica de Vale`ncia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of Tetrahydrofuran Derivatives from 5-Hydroxymethylfurfural: Selective Ring Hydrogenation of HMF and Cascade Transformations over Pd Supported on Amino-Modified ITQ-2 Zeolite

  • Moriana-Herraiz, Carlos
  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] 5-Hydroxymethylfurfural (HMF) has been efficiently hydrogenated into the highly valuable 5-hydroxymethyltetrahydrofurfural (HMTHF) through the selective hydrogenation of the furan ring using Pd supported on pure silica ITQ-2 zeolite functionalized with amino groups (Pd-NITQ-2). Highly dispersed nanosized Pd nanoparticles were generated on the amino functionalized support, which exhibits high activity and selectivity to HMTHF. Yields up to 97% (99% selectivity) of HMTHF were achieved by working at room temperature under 10 bar hydrogen using ethanol as a solvent. Comparatively, Pd supported over nonfunctionalized ITQ-2 (Pd-ITQ-2) showed 17 times lower activity than Pd-NITQ-2. The IR of CO titration studies showed that on Pd-ITQ-2, catalyst oxophilic Pd species (Pd delta+) are generated, which is related to their lower activity in H2 activation and therefore their lower activity in the hydrogenation of the furan ring with respect to the Pd-NITQ-2 sample. The effect of Pd loading on NITQ-2, as well as the solvent effect, was studied. The optimized catalyst ((1%)-Pd-NITQ-2) was stable and could be reused for seven consecutive cycles, practically maintaining activity and selectivity. Finally, the optimized catalyst was applied to three different two-step cascade processes to obtain tetrahydrofuran substituted Knoevenagel adducts, N-substituted tetrahydrofurfurylamines, and tetrahydrofuran-substituted benzimidazole derivatives., This work has been funded by the Spanish Ministry of Science and Innovation through the "Severo Ochoa Program" (CEX-2021-001230-S), the PID2021-126235OB-C31, and PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by "ERDF A way of making Europe project. C.M. thanks the Severo Ochoa program for predoctoral fellowships. The authors also thank the Microscopy Service of UPV for the TEM measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Organo-modified halloysite nanotubes as supports for gold nanoparticles as highly recyclable catalyst for hydrogenation of nitroarenes

  • Bedoya, Santiago
  • Gonzalez-Vera, Daniela
  • Leal-Villarroel, Edgardo
  • Gracia, Francisco
  • Pecchi, Gina
  • Torres, Cecilia C.
  • Campos, Cristian H.
  • Domine, Marcelo Eduardo
[EN] Organo-modified halloysite nanotube (HNT) lumens were synthesized via an amine-silane-assisted method to encapsulate Au nanoparticles (Au-NPs) as catalysts for hydrogenation of nitroarenes. The obtained materials were characterized by attenuated total reflectance Fourier-transform infrared spectroscopy, zeta potential measurements, N2 adsorption-desorption isotherms at-196 degrees C, X-ray diffraction, ultraviolet-visible diffuse reflectance spectroscopy, and transmission electron microscopy. The Au-NPs were uniformly distributed within the HNT lumen. An increase in Au loading (from 0.10 to 0.50 wt%) resulted in a broader Au-NPs size distribution. The catalysts were evaluated for nitrobenzene hydrogenation as test reaction under moderate reaction conditions (30 degrees C and 10 bar H2 pressure in ethanol) to assess their performance and reusability. Results indicate that the catalysts are sensitive to variations in the Au-NPs size in the range of 1.5-6.5 nm. The catalyst containing 0.10 wt% Au exhibited exceptional stability and recyclability, retaining its catalytic activity with minimal loss over at least 10 consecutive reuse cycles. In addition, the best catalyst displayed a high efficiency and selectivity in the hydrogenation of pharmaceutical-based nitroarenes. The proposed organo-modified HNT material offers an innovative route for synthesizing efficient and reusable metal-based catalysts demonstrating significant potential for their use in another similar catalytic processes., The authors would like to thank the ANID project FONDECYT 1231352. M.E. Domine thanks Spanish government (PID2021-125897OB-I00) for financial support. The authors would like to thank to the Institute of Applied Economic Geology of the University of Concepcion for providing the facility to perform mineralogical analyses in the X-ray Laboratory.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Platinum single sites supported on defected hydrogen-titanate nanotubes as selective catalyst for tandem synthesis of 3-methylindoles from nitrocompounds and acetol

  • Leal-Villarroel, Edgardo
  • González-Vera, Daniela
  • Serp, Philippe
  • Campos, Cristian H.
  • Torres, Cecilia C.
  • Domine, Marcelo Eduardo
  • Gómez-Acosta, Daviel|||0000-0003-0010-4507
[EN] Herein, we report Pt single atom (SA) - nanoparticle (NPs) supported on reduced titania nanotubes as an alternative route to obtain 3-methylindole (3-ML) from nitrobenzene and acetol as starting materials. 1 wt% Pt catalyst supported on TiO2, pristine titania nanotubes and reduced titania were prepared and characterized by techniques such as EPR, DRX, HR-TEM, N2 adsorption-desorption isotherms, to confirm the obtention Pt SA-NPs systems with sizes between 1.5 and 4.8 nm. The catalyst on reduced titania possesses improved activity and selectivity in the synthesis of 3-ML compared to the control systems, showing a high-moderate production of the heterocycle only in the presence of Pt SA. The temperature effect and a series of 4-substituited nitrobenzenes were used to evaluate the scope of the obtained catalyst in the production of indoles scaffolds. Recyclability studies show that the best catalyst proves to have an important efficiency obtaining conversion of nitrobenzene higher than 98 % and active for 7 consecutive reaction cycles. To the best of our knowledge our results are pioneers in the catalytic synthesis of 3-methylindole using nitrobenzene and acetol since it is an unexplored reaction route., This research was funded by the Agencia Nacional de Investigacion y Desarrollo de Chile programa FONDECYT-ANID grant number 1231395, grant number 1231352, PROGRAMA DE COOPERACION CIENTIFICA ECOS-ANID 210036 and ECOS Sud-ANID (project ECOS no C21E03) . Daniela Gonza lez-Vera and Marcelo E. Domine thank ITQ (UPV-CSIC) and MICINN of Spain (PID-2021-125897-OBI00) for financial support. Edgardo Leal thanks Grant ANID 242230083.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

From biomass-derived furans to aromatic compounds: design of Al-Nb-SBA-15 mesoporous structures and study of their acid properties on catalytic performance

  • Elias, Veronica R.
  • Ferrero, Gabriel O.
  • Idriceanu, Madalina Georgiana
  • Eimer, Griselda A.
  • Domine, Marcelo Eduardo
[EN] Renewable p-xylene was successfully attained via aromatization reaction of bio-derived 2,5-DMF with ethylene over Al-Nb-SBA-15 mesoporous materials with enhanced acid properties., Financial support by CSIC (Spain) through the project COOPB-20415 and the Spanish Government (MICINN, projects PGC2018-097277-B-I00 and PID2021-125897-B-I00) and by Argentinean Government through the project ANPCYT-PICT-2020-SERIEA-00918 are gratefully acknowledged. Authors also thank M. Parreno Romero and the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Green Synthesis of Tetrahydrofuran Aminoalcohols From HMF and Ammonia in Aqueous Phase: Boosting Activity and Stability Using Non-noble Bimetallic Carbon Encapsulated NiCo Alloy Catalyst

  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The synthesis of the 5-hydroxymethyl-2-tetrahydrofurfuryl amine (THMFA) by the reductive amination of 5-Hydroxymethylfurfural (HMF) with ammonia through a single reaction step has been studied in aqueous phase using monodispersed Ni and Co nanoparticles encapsulated in a thin carbon layer. The Ni@C and Co@C catalysts were prepared starting from the corresponding oxides and using glucose a carbon source following a hydrothermal method. While the Co@C catalyst showed low selectivity to the target THMFA due to the formation of byproducts coming from the over-hydrogenation of HMF, Ni@C catalyst resulted in much more selective, however, it showed poor stability. The catalyst instability was solved by preparing a bimetallic NiCo alloy sample (Ni1Co1@C molar ratio Ni/Co 1:1) which not only resulted more active than Ni, but it was stable and reusable upon several reaction cycles, maintaining activity and selectivity. The high selectivity of THMFA obtained when using water as reaction media (95%), compared with the obtained when tetrahydrofuran is used as a solvent (51%) suggest that water plays a key role on selectivity, inhibiting the accumulation of the secondary imine intermediate by accelerating the transimination process between de secondary imine and ammonia., This work has been funded by the Spanish Ministry of Science and Innovation through the "Severo Ochoa Program" (CEX-2021-001230-S) and the PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by "ERDF A way of making Europe project. The authors also thank Microscopy Service of UPV for the TEM measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure-reactivity relations in Cu/ZrO2 catalysed glycerol dehydration to acetol in continuous flow

  • Mazarío-Santa-Pau, Jaime
  • Jampaiah, Deshetti
  • Villasante-Iturria, Pablo
  • Wilson, Karen
  • Lee, Adam
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Domine, Marcelo Eduardo
[EN] The selective dehydration of glycerol to hydroxyacetone (acetol) was studied in a continuous flow fixed-bed reactor with CuO supported on monoclinic (m-) or tetragonal (t-) ZrO2 nanoparticles. Catalysts were characterised by ICP, N-2 physisorption, powder XRD, HR-TEM and SEM-EDS, N2O titration, and NH3- and CO2-TPD. Quasi-in situ XPS reveals the impact of zirconia phase on copper speciation, with m-ZrO2 preferentially stabilising Cu(I) species, whose presence correlates with enhanced catalytic performance. In situ FTIR of 1,2-propanediol and glycerol evidenced Cu(I) promote desorption of a CO containing intermediate. Solvent selection strongly influenced catalyst reactivity, with methanol less prone to competitive adsorption than water, and favouring the genesis of Cu(I) species. Cu/m-ZrO2 achieved 60% yield of the desired acetol at 240 degrees C, maintaining >= 50% yield over three consecutive regeneration cycles, being one of the most efficient catalysts based on earth abundant metals for continuous glycerol dehydration to acetol under the present conditions., Authors thank grants PGC2018-097277-B-I00 and PID2021-125897-OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", and the Australian Research Council for funding (DP200100204, DP200100313, LP190100849). J. M. also thanks Spanish Government (CTQ-2015-67592) for his FPI fellowship. The authors also thank J. M. Salas for his help with IR measurements, and M. Parreno Romero and the Electron Microscopy Service of Universitat Politecnica de Valencia for their support during electron microscopy analyses.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Noble metal free carbon encapsulated CoNi alloy catalyst for total hydrogenation of 5-hydroxymethylfurfural to tetrahydrofurandiol in aqueous media

  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Hurtado-Cebrián, Beatriz
[EN] The selective hydrogenation of 5-(hydroxymethyl)furfural (HMF) into 2,5-bis-(hydroxymethyl)tetrahydrofuran (BHMTHF) in flow reactor using water as a green solvent, has been achieved on a non-noble metal catalyst based on monodispersed CoNi alloy nanoparticles covered by a thin carbon layer. The alloyed catalyst containing CoNi (molar ratio 1¿:¿1) was prepared in a one-step synthesis following a hydrothermal method. Total conversion of HMF with 91¿% selectivity to BHMTHF was achieved. The reaction network has been stablished, in which the carbonyl group of HMF is first reduced to alcohol giving the 2,5-bis-(hydroxymethyl)furan (BHMF) with an apparent activation energy of 25¿KJ/mol, and then the double bonds of the furan ring are hydrogenated (apparent Ea=31¿KJ/mol). Formation of byproducts, mainly proceed from furan ring opening and ring rearrangement processes of BHMF, promoted by water. BHMTHF resulted a compound highly stable under reaction conditions. The fixed bed flow reactor was maintained operational for 65¿h without observing any loss of catalytic activity and selectivity., This work has been funded by the Spanish Ministry of Science and Innovation through the Severo Ochoa Program (CEX2021-001230-S) and the PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by ERDF A way of making Europe project . B. H. thanks the Severo Ochoa program for predoctoral fellowships. The authors also thank Microscopy Service of UPV for the TEM measuremen
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel Sn-Nb-Based Catalysts with Enhanced Acidity and Water Resistance for the Aqueous-Phase Condensation of Light Oxygenated Compounds

  • Fernandez-Arroyo-Naranjo, Alberto
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Domine, Marcelo Eduardo
[EN] Upgrading of light oxygenated compounds present in aqueous effluents obtained from primary treatments of biomass (pyrolysis, fermentation) is imperative in the current bio-refinery business model development. In this work, efficient and water-resistant catalysts are needed for the valorization of these residual streams via aqueous-phase condensation reactions. Based on our previous results, where Nb-based materials stand as promissory catalysts, the activity of tin-niobium mixed oxides in the condensation of light oxygenates is here studied using a representative aqueous model mixture including acetic acid, propanal, acetol, and ethanol. Sn-Nb mixed oxides preparation via co-precipitation allow obtaining homogenous rutile-phase materials with enhanced textural and acid properties compared to commercial catalysts or Sn-Nb materials synthesized by different procedures. This work displays the potential of Sn-Nb rutile-phase catalysts with inherent hydrophobic characteristics for the conversion of light oxygenated compounds present in bio-derived aqueous effluents into hydrocarbons and aromatics useful for liquid fuel applications. These pseudo-crystalline Sn-Nb materials show remarkable condensation activity by exposing Lewis acid sites capable of activating carbonyl compounds even in the presence of large amounts of water and organic acids. Therefore, these novel acid catalysts exhibit outstanding performance and stability in complex acidic aqueous environment compared to other Sn-Ti and Ce-Zr mixes oxides broadly used in these processes., Financial support by the Ministerio de Ciencia e Innovacion of Spain (PGC2018-097277-B-I00 and PID2021-125897OB-I00) is gratefully acknowledged. A. F-A. thanks La Caixa-Severo Ochoa Foundation and the Severo Ochoa Excellence Program (SVP-2014-068669) for the PhD fellowship. Authors also thank Miriam Parreno-Romero and the Electron Microscopy Service of Universitat Politecnica de Valencia for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-pot chemo- and photo-enzymatic linear cascade processes

  • Carceller-Carceller, Jose Miguel
  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The combination of chemo- and photocatalyses with biocatalysis, which couples the flexible reactivity of the photo- and chemocatalysts with the highly selective and environmentally friendly nature of enzymes in one-pot linear cascades, represents a powerful tool in organic synthesis. However, the combination of photo-, chemo- and biocatalysts in one-pot is challenging because the optimal operating conditions of the involved catalyst types may be rather different, and the different stabilities of catalysts and their mutual deactivation are additional problems often encountered in one-pot cascade processes. This review explores a large number of transformations and approaches adopted for combining enzymes and chemo- and photocatalytic processes in a successful way to achieve valuable chemicals and valorisation of biomass. Moreover, the strategies for solving incompatibility issues in chemo-enzymatic reactions are analysed, introducing recent examples of the application of non-conventional solvents, enzyme-metal hybrid catalysts, and spatial compartmentalization strategies to implement chemo-enzymatic cascade processes. This review explores linear cascade reactions by combining chemo-, photo- and biocatalysts for organic synthesis and strategies to overcome incompatibility issues., This work has been funded by the Spanish Ministry of Science and Innovation through the "Severo Ochoa Program" (CEX-2021-001230-S) and the PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by "ERDF A way of making Europe" project. J. M. C. thanks the Margarita Salas grant from the Ministerio de Universidades, Universitat Politecnica de Valencia, Spain, funded by the European Union-Next Generation EU (2021-2023).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dehydration of xylose to furfural catalyzed by highly stable W-Nb-O mixed oxides Bronzes

  • Cernicharo-Toledo, Francisco
  • Domine, Marcelo Eduardo
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • De Arriba-Mateos, Agustín
  • López Sánchez, Jesús
[EN] In this work, the dehydration reaction of xylose (a representative C5 sugar) to furfural has been studied over W-Nb-O mixed oxides presenting hexagonal or pseudo-crystalline Bronze-type structure with controlled textural and acid properties, and also high stability under reaction conditions. Thus, a series of W-Nb-O metal oxides with different W/Nb ratios have been prepared hydrothermally, characterized by several physicochemical techniques and tested in autoclave-type reactors in liquid phase. Their influence on the catalytic activity has been assessed by tuning the Brønsted/Lewis acid properties of W-Nb-O materials. Interestingly, optimal catalytic results for the dehydration of xylose to furfural in monophasic system (water/ethanol mixture) were achieved for W0.20Nb0.80Ox catalyst, with a furfural selectivity comparable to that of sulfuric acid industrial catalyst. Furfural productivity (0.683 gFur ¿ gCat ¿ 1 ¿ h¿ 1) attained with this W-Nb-O catalyst was higher than that calculated for most relevant and recently reported solid acid catalysts working in both mono- and bi-phasic systems, respectively. Catalytic activity of W-Nb-O material remained practically unchanged after three consecutive reuses, while structure and chemical composition of material were maintained unaltered either after three catalytic cycles or after 14 days experiment carried out under optimal reaction conditions. Reactivity results have been explained on the combination of both Brønsted and Lewis acid sites as a result of the different incorporation of niobium into the bronze structure., Authors thank financial support by the Spanish Government (PID2021-125897OB-I00, PID2021-126235OB-C31, and PID2023- 151036OA-I00) funded by MCIN/AEI/10.13039/501100011033 and FEDER funds. Financial support by European Commission, H2020 Pro-gram (HIGFLY Project, grant agreement N degrees 101006618) is gratefully acknowledged. J.L.-S. acknowledges grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF +) . Authors also thank Miriam Parreño-Romero and the Electron Microscopy Service of Universitat Politècnica de València for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemoenzymatic synthesis of amino-esters as precursors of ammonium salt-based surfactants from 5-hydroxymethylfurfural (HMF)

  • Moriana-Herraiz, Carlos
  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] N-Substituted 5-(hydroxymethyl)-2-furfuryl amines have been obtained through the reductive amination of 5-hydroxymethylfurfural (HMF) with a variety of primary amines using a non-noble metal catalyst based on monodisperse Co nanoparticles covered by a thin carbon layer. The Co@C catalyst was highly active, selective and stable, allowing us to perform the reductive amination of HMF under very mild reaction conditions (60 degrees C and 4 bar H2) using ethanol as a green solvent and achieve the corresponding amino-alcohol in yields ranging from 80 to 99%. Moreover, the reaction was extended to other furanic aldehydes with excellent success. Furthermore, in order to synthesize amino-ester derivatives, precursors of ammonium salt-based surfactants, the reductive amination of HMF with methylamine was coupled with the selective esterification of the hydroxymethyl group of the furan ring with fatty acids using lipase CALB (Novozym 435) as a biocatalyst in 2-methyltetrahydrofuran as a green and enzyme compatible solvent, achieving practically total conversion to the corresponding amino-esters. The process was implemented in flow reactors by combining two consecutive fixed bed reactors, achieving a global yield of the amino-ester derivative of 85%, which was maintained over 86 h of operation. Precursors of ammonium salt biosurfactants have been obtained from HMF by coupling cobalt-catalyzed reductive amination with selective bio-esterification using an immobilized lipase CALB. The process has been optimized in batch and flow reactors., This work has been funded by the Spanish Ministry of Science and Innovation through the "Severo Ochoa Program" (CEX-2021-001230-S) and PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by "ERDF A way of making Europe project". C. M. thanks the Severo Ochoa program for predoctoral fellowships. The authors also thank the Microscopy Service of UPV for the TEM measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valorization of biomass platform molecules through one-pot cascade processes using heterogeneous catalysts

  • Arias, Karen S.|||0000-0001-5649-7392
  • Velty, Alexandra|||0000-0002-8263-4570
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Iborra Chornet, Sara|||0000-0003-1758-5095
[EN] The transformation of biomass derived platform molecules is an interesting approach to produce valuable chemicals from biomass. In addition, process intensification by reducing the number of steps for final chemicals production by performing cascade-type catalytic reactions in one-pot mode is largely desirable in a biorefinery facility. In this review the possibilities of valorization of representative platform molecules such as sugars, itaconic and levulinic acids and furanic aldehydes through one-pot cascade processes using mono and multifunctional heterogeneous catalysts are illustrated through selected examples., This work has been funded by the Spanish Ministry of Science and Innovation through the Severo Ochoa Program (CEX-2021-001230-S) and the PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by ERDF A way of making Europe project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bimetallic Nickel and Cobalt nanoparticles supported on TiO2 as catalyst for the synthesis of 2-substituted benzimidazole by reductive amination-cyclization of 2-nitroaniline and aldehydes

  • González-Vera, Daniela
  • Leal-Villarroel, Edgardo
  • Bustamante, Tatiana M.
  • Díaz de León, Jorge Noé
  • Torres, Cecilia C.
  • Campos, Cristian H.
  • Lucía
  • Domine, Marcelo Eduardo
[EN] The benzimidazole nucleus finds respectable space and interest among nitrogen heterocycles, whether for its applications or the number of synthetic methodologies employed in their preparation. Recent trends show that interest in the scientific fraternity is now bending towards exploring the use of bimetallic NiCo-based heterogeneous catalysts for the synthesis of benzimidazoles. This work is aimed at the development of new catalytic systems obtained from the H2-assisted reduction of NixCo1-xTiO3 mixed oxides to produce bimetallic NixCo1-x/ TiO2 (x = 0.0, 0.1, 0.3, 0.5, and 1.0) catalysts for the tandem selective production of 2-substituted benzimidazole scaffolds from 2-nitroaniline and aldehydes. The physicochemical characterization displayed the formation of the NiCo alloy supported on TiO2-rutile and the active phase are almost in the zero-valent state after the reduction treatment. The catalytic activity showed that all the catalysts are active in the tandem synthesis of 2-benzimid-azole, and the selectivity to the target product is a function of the Ni content in the catalyst. The most efficient and selective system was Ni0.1Co0.9/TiO2, which remained active after 10 consecutive cycles. The Ni0.1Co0.9 composition in the catalyst formulation affords optimal physicochemical properties for enhanced catalytic performance and enables the recyclability ability to produce the target product. Thus, our results provide a valuable and practical method by which aromatic N-heterocycles of pharmaceutical relevance can be obtained via catalytic tandem reaction using non-noble based catalysts., The authors would like to thank the ANID projects FONDECYT 1231352 and FONDECYT 1231395. D. Gonzalez-Vera ¿ is grateful for her doctoral scholarship ANID 21200167 and ITQ (UPV-CSIC) for support during her research stay, and E Leal thanks Grant ANID 21220327. L. Camarena and M.E. Domine thanks Spanish government (PID2021 125897OB-I00) for financial support. The authors would like to thank to David Domiguez by his expert technical assistance in the XPS analysis and the Institute of Applied Economic Geology of the University of Concepcion ¿ for providing the facility to perform mineralogical analyses in the X-ray Laboratory.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oxidation of 5-Hydroxymethylfurfural into 2,5-Diformylfuran on Alkali Doped Ru/C Catalysts. Electron Properties of Ruthenium Species as Descriptor of Catalytic Activity

  • Hurtado, Beatriz
  • Arias, Karen S.
  • Climent, Maria J.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Selective aerobic oxidation of 5-hydroxymethylfurfural into 2,5-diformylfuran has been achieved on alkali doped Ru/C catalyst. Optimization of Ru metal nanoparticles, as well as the nature and amount of the alkali dopant have been performed. The results showed that doping the Ru/C catalyst with controlled amount of potassium increases the catalytic activity, 2.5 fold with respect to the non-doped sample. Spectroscopic studies showed that these differences in activity can be attributed to a different oxidation reaction mechanism associated to the presence of electron rich Ru species in the promoted sample that facilitate the dissociation of O2, while prevents the oxidation of the metal. The Ru/C-K doped catalyst resulted very stable against leaching and metal sintering, being possible the reuse over several consecutive runs. Moreover, the catalyst could be successfully applied to the oxidation of different alcohols., This work has been funded by the Spanish Ministry of Science and Innovation through the "Severo Ochoa Program" (CEX-2021-001230-S)) and the PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by "ERDF A way of making Europe project. B.H. thanks the Severo Ochoa program for predoctoral fellowships. The authors also thank Microscopy Service of UPV for the TEM measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Renewable Mesoporous Materials: A Novel and Economical Synthesis from Biomass Waste

  • Palacios, Marina B.
  • Carraro, Paola M.
  • Vaschetto, Eliana G.
  • Eimer, Griselda A.
  • Domine, Marcelo Eduardo
[EN] Innovative and sustainable mesoporous siliceous materials have been successfully synthesized from renewable precursors and employing environmentally friendly methodologies (sol-gel method). These materials were prepared by hydrothermal synthesis using an economical and commercially available porogen, glyceryl monostearate, and a source of silica extracted from rice husk, which is an underutilized agro-waste. Al-mesoporous-type nanostructured catalysts with different Al contents were prepared by direct synthesis (Si/Al = 10, 30, 60, and 100) and characterized by N2 adsorption, SEM-EDS, TEM, NMR, XPS, FT-IR, and adsorption of pyridine coupled to FT-IR spectroscopy. Thus, it was found that the highest incorporation of aluminum into the red was achieved from a Si/Al initial molar ratio of 10, a hydrothermal treatment of 3 days at 85 degrees C and 1 h of calcination at 550 degrees C. This feature leads to a high acidity for these materials, which makes them very attractive for their application in acid-driven industrial reactions of interest. Thus, owing to the excellent physical and chemical properties of these materials, employing renewable sources is possible in the design of materials with catalytic applications, thought a useful, simple, and economical method., G.A.E., E.G.V., M.P.C., and M.B.P. are grateful to CONICET and UTN-FRC for the financial support. M.E.D. thanks MICINN of Spain for funding (project PID2021-125897OB-I00).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-pot chemo- and photo-enzymatic linear cascade processes

  • Carceller, Jose Miguel
  • Arias, Karen S.
  • Climent Olmedo, María José
  • Iborra Chornet, Sara
  • Corma, Avelino
The combination of chemo- and photocatalyses with biocatalysis, which couples the flexible reactivity of the photo- and chemocatalysts with the highly selective and environmentally friendly nature of enzymes in one-pot linear cascades, represents a powerful tool in organic synthesis. However, the combination of photo-, chemo- and biocatalysts in one-pot is challenging because the optimal operating conditions of the involved catalyst types may be rather different, and the different stabilities of catalysts and their mutual deactivation are additional problems often encountered in one-pot cascade processes. This review explores a large number of transformations and approaches adopted for combining enzymes and chemo- and photocatalytic processes in a successful way to achieve valuable chemicals and valorisation of biomass. Moreover, the strategies for solving incompatibility issues in chemo-enzymatic reactions are analysed, introducing recent examples of the application of non-conventional solvents, enzyme-metal hybrid catalysts, and spatial compartmentalization strategies to implement chemo-enzymatic cascade processes., This work has been funded by the Spanish Ministry of Science and Innovation through the “Severo Ochoa Program” (CEX-2021-001230-S) and the PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by “ERDF A way of making Europe” project. J. M. C. thanks the Margarita Salas grant from the Ministerio de Universidades, Universitat Politécnica de Valencia, Spain, funded by the European Union-Next Generation EU (2021–2023).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemoenzymatic synthesis of amino-esters as precursors of ammonium salt-based surfactants from 5-hydroxymethylfurfural (HMF)

  • Moriana Herraiz, Carlos
  • Arias, Karen S.
  • Climent Olmedo, María José
  • Iborra Chornet, Sara
  • Corma, Avelino
N-Substituted 5-(hydroxymethyl)-2-furfuryl amines have been obtained through the reductive amination of 5-hydroxymethylfurfural (HMF) with a variety of primary amines using a non-noble metal catalyst based on monodisperse Co nanoparticles covered by a thin carbon layer. The Co@C catalyst was highly active, selective and stable, allowing us to perform the reductive amination of HMF under very mild reaction conditions (60 °C and 4 bar H) using ethanol as a green solvent and achieve the corresponding amino-alcohol in yields ranging from 80 to 99%. Moreover, the reaction was extended to other furanic aldehydes with excellent success. Furthermore, in order to synthesize amino-ester derivatives, precursors of ammonium salt-based surfactants, the reductive amination of HMF with methylamine was coupled with the selective esterification of the hydroxymethyl group of the furan ring with fatty acids using lipase CALB (Novozym 435) as a biocatalyst in 2-methyltetrahydrofuran as a green and enzyme compatible solvent, achieving practically total conversion to the corresponding amino-esters. The process was implemented in flow reactors by combining two consecutive fixed bed reactors, achieving a global yield of the amino-ester derivative of 85%, which was maintained over 86 h of operation., This work has been funded by the Spanish Ministry of Science and Innovation through the “Severo Ochoa Program” (CEX-2021-001230-S) and PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by “ERDF A way of making Europe project”. C. M. thanks the Severo Ochoa program for predoctoral fellowships. The authors also thank the Microscopy Service of UPV for the TEM measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Noble-Metal-Free Carbon Encapsulated CoNi Alloy Catalyst for the Hydrogenation of 5-(Hydroxymethyl) Furfural to Tetrahydrofurandiol in Aqueous Media

  • Arias, Karen S.
  • Hurtado, Beatriz
  • Climent Olmedo, María José
  • Iborra Chornet, Sara
  • Corma, Avelino
The selective hydrogenation of 5-(hydroxymethyl)furfural (HMF) into 2,5-bis-(hydroxymethyl)tetrahydrofuran (BHMTHF) in flow reactor using water as a green solvent, has been achieved on a non-noble metal catalyst based on monodispersed CoNi alloy nanoparticles covered by a thin carbon layer. The alloyed catalyst containing CoNi (molar ratio 1 : 1) was prepared in a one-step synthesis following a hydrothermal method. Total conversion of HMF with 91 % selectivity to BHMTHF was achieved. The reaction network has been stablished, in which the carbonyl group of HMF is first reduced to alcohol giving the 2,5-bis-(hydroxymethyl)furan (BHMF) with an apparent activation energy of 25 KJ/mol, and then the double bonds of the furan ring are hydrogenated (apparent Ea=31 KJ/mol). Formation of byproducts, mainly proceed from furan ring opening and ring rearrangement processes of BHMF, promoted by water. BHMTHF resulted a compound highly stable under reaction conditions. The fixed bed flow reactor was maintained operational for 65 h without observing any loss of catalytic activity and selectivity., This work has been funded by the Spanish Ministry of Science and Innovation through the “Severo Ochoa Program” (CEX-2021-001230-S) and the PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by “ERDF A way of making Europe project”. B. H. thanks the Severo Ochoa program for predoctoral fellowships. The authors also thank Microscopy Service of UPV for the TEM measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Valorization of biomass platform molecules through one-pot cascade processes using heterogeneous catalysts

  • Arias Carrascal, Karen Sulay
  • Velty, Alexandra Isabelle Lucienne
  • Climent Olmedo, María José
  • Iborra Chornet, Sara
The transformation of biomass derived platform molecules is an interesting approach to produce valuable chemicals from biomass. In addition, process intensification by reducing the number of steps for final chemicals production by performing cascade-type catalytic reactions in one-pot mode is largely desirable in a biorefinery facility. In this review the possibilities of valorization of representative platform molecules such as sugars, itaconic and levulinic acids and furanic aldehydes through one-pot cascade processes using mono and multifunctional heterogeneous catalysts are illustrated through selected examples., This work has been funded by the Spanish Ministry of Science and Innovation through the “Severo Ochoa Program” (CEX-2021-001230-S) and the PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by “ERDF A way of making Europe project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure-reactivity relations in Cu/ZrO2 catalysed glycerol dehydration to acetol in continuous flow

  • Mazarío, Jaime
  • Jampaiah, Deshetti
  • Concepción, Patricia
  • Villasante-Iturria, Pablo
  • Wilson, Karen
  • Lee, Adam
  • Dómine, Marcelo Eduardo
The selective dehydration of glycerol to hydroxyacetone (acetol) was studied in a continuous flow fixed-bed reactor with CuO supported on monoclinic (m-) or tetragonal (t-) ZrO nanoparticles. Catalysts were characterised by ICP, N physisorption, powder XRD, HR-TEM and SEM-EDS, NO titration, and NH- and CO-TPD. Quasi-in situ XPS reveals the impact of zirconia phase on copper speciation, with m-ZrO preferentially stabilising Cu(i) species, whose presence correlates with enhanced catalytic performance. In situ FTIR of 1,2-propanediol and glycerol evidenced Cu(i) promote desorption of a C 00000000 00000000 00000000 00000000 11111111 00000000 11111111 00000000 00000000 00000000 O containing intermediate. Solvent selection strongly influenced catalyst reactivity, with methanol less prone to competitive adsorption than water, and favouring the genesis of Cu(i) species. Cu/m-ZrO achieved 60% yield of the desired acetol at 240 °C, maintaining ≥50% yield over three consecutive regeneration cycles, being one of the most efficient catalysts based on earth abundant metals for continuous glycerol dehydration to acetol under the present conditions., Authors thank grants PGC2018-097277-B-I00 and PID2021-125897-OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and the Australian Research Council for funding (DP200100204, DP200100313, LP190100849). J. M. also thanks Spanish Government (CTQ-2015-67592) for his FPI fellowship. The authors also thank J. M. Salas for his help with IR measurements, and M. Parreño Romero and the Electron Microscopy Service of Universitat Politècnica de València for their support during electron microscopy analyses.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oxidation of 5-Hydroxymethylfurfural into 2,5-Diformylfuran on Alkali Doped Ru/C Catalysts. Electron Properties of Ruthenium Species as Descriptor of Catalytic Activity

  • Hurtado, Beatriz
  • Arias, Karen S.
  • Concepción, Patricia
  • Climent Olmedo, María José
  • Iborra Chornet, Sara
  • Corma, Avelino
Selective aerobic oxidation of 5-hydroxymethylfurfural into 2,5-diformylfuran has been achieved on alkali doped Ru/C catalyst. Optimization of Ru metal nanoparticles, as well as the nature and amount of the alkali dopant have been performed. The results showed that doping the Ru/C catalyst with controlled amount of potassium increases the catalytic activity, 2.5 fold with respect to the non-doped sample. Spectroscopic studies showed that these differences in activity can be attributed to a different oxidation reaction mechanism associated to the presence of electron rich Ru species in the promoted sample that facilitate the dissociation of O, while prevents the oxidation of the metal. The Ru/C−K doped catalyst resulted very stable against leaching and metal sintering, being possible the reuse over several consecutive runs. Moreover, the catalyst could be successfully applied to the oxidation of different alcohols., This work has been funded by the Spanish Ministry of Science and Innovation through the “Severo Ochoa Program” (CEX-2021-001230-S)) and the PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by “ERDF A way of making Europe project. B.H. thanks the Severo Ochoa program for predoctoral fellowships. The authors also thank Microscopy Service of UPV for the TEM measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From biomass-derived furans to aromatic compounds: design of Al-Nb-SBA-15 mesoporous structures and study of their acid properties on catalytic performance

  • Elías, Verónica R.
  • Ferrero, Gabriel O.
  • Idriceanu, Madalina G.
  • Eimer, G.A.
  • Dómine, Marcelo Eduardo
Renewable aromatics compounds (i.e. BTXs) are interesting, useful and much desired chemicals for industry due to the lack or difficulty to find available non-fossil feedstocks capable to produce these aromatics in good yields. Therefore, the aromatization reaction of biomass-derived furans is a valuable strategy for a sustainable production of aromatic compounds. In this work, modified SBA-15 mesoporous silicates with enhanced acid properties were successfully synthetized by a one-pot method, directly incorporating the metal precursor (Nb, W, Ga, Zr, Al) in the synthesis gel. The solids were characterized by different techniques, such as XRD, TEM, ICP, N physisorption, FT-IR of adsorbed pyridine and NH-TPD, among others. The catalytic performance of mesoporous materials was tested in the Diels-Alder (DA) aromatization reaction using 2,5-DMF as a diene and ethylene as a dienophile for the selective production of p-xylene (p-xy). Among the mono-metallic solids (modified with Nb, W, Ga, Zr or Al) showing Lewis (Le) acidity, only those that also present Brønsted (Br) sites showed activity in the aromatization reaction, appearing Al(x)-S as the most selective catalyst for the p-xy production. Then, Br acidity in bi-metallic solids was ensured by co-incorporating Al in the structure, showing Al-Nb-SBA-15 - materials the best catalytic performance. For these solids, the p-xy yield showed a strong dependence with the metal content and the moderate strength Br/Le acid sites ratio. Optimization of the composition of Al-Nb-SBA-15 catalyst and the reaction conditions allowed reaching a p-xy yield even higher than that observed for previous reported reference catalyst (i.e. H-ZSM-5). It was demonstrated that the type of metals (Al and Nb) incorporated in SBA-15 provides an adequate combination of Br and Le acid sites of moderate strength and homogeneously distributed on the solid (low surface density of acid sites), which together with the high accessibility offered by the mesoporous material, are features to be considered for the aromatic production. The observed activity for catalysts with both Le and Br sites was mainly attributed to their ability to retard side reactions, such as oligomerization and alkylation by means of the effective cycloaddition of 2,5-DMF with ethylene in Le sites, in addition to the dehydrative aromatization reaction allowed by the presence of Br acidity., Financial support by CSIC (Spain) through the project COOPB-20415 and the Spanish Government (MICINN, projects PGC2018-097277-B-I00 and PID2021-125897-B-I00) and by Argentinean Government through the project ANPCYT-PICT-2020-SERIEA-00918 are gratefully acknowledged. Authors also thank M. Parreño Romero and the Electron Microscopy Service of Universitat Politècnica de València for their support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rutile-Phase Sn-Ti Mixed Oxides as Acid Catalysts for the Condensation of C2-C3 Oxygenated Compounds in Water

  • Fernández-Arroyo Naranjo, Alberto
  • Dómine, Marcelo Eduardo
The design of new cost-effective and water-resistant acid catalysts is crucial for valorizing aqueous side-streams to increase the efficiency and competitiveness of bio-refineries in a sustainable way. In this work, Sn−Ti mixed oxides are prepared via a green and scalable co-precipitation method. This synthesis procedure allows obtaining homogeneous rutile-phase Sn−Ti mixed oxides with enhanced textural properties and a higher amount of Lewis acid sites. More importantly, the catalytic behavior of these Sn−Ti mixed oxides is investigated by using an aqueous mixture of C-C representative oxygenated compounds, closer to real industrial conditions and differing from usual individual probe molecules studies performed even in the absence of water. Catalytic experiments combined and correlated with spectroscopic measurements (i. e., XRD, TEM, FT-IR with pyridine adsorption-desorption and N adsorption) are performed to better understand the properties of different Sn−Ti catalysts. These materials show promising results in the condensation of light oxygenated compounds present in aqueous fractions. Homogeneous and robust rutile-phase structures with inherent hydrophobic characteristics turn these Sn−Ti materials into active and highly resistant catalysts capable to transform these low-value oxygenated compounds into a mixture of hydrocarbons and aromatics useful for blending with automotive fuels, especially under complex acidic aqueous environments and moderate process conditions., Financial support by the Spanish Government (PGC2018-097277-B−I00 and PID2021-125897OB−I00) is gratefully acknowledged. A. F−A. thanks “la Caixa-Severo Ochoa” Foundation for the PhD fellowship. Authors also thank Miriam Parreño-Romero and the Electron Microscopy Service of Universitat Politècnica de València for their support.