Pasar al contenido principal

Development of unusual nanophases by sol-gel chemistry for, gas sensing, permanent magnets and advanced information technologies

RYC2022-035912-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dehydration of xylose to furfural catalyzed by highly stable W-Nb-O mixed oxides Bronzes

  • Cernicharo-Toledo, Francisco
  • Domine, Marcelo Eduardo
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • De Arriba-Mateos, Agustín
  • López Sánchez, Jesús
[EN] In this work, the dehydration reaction of xylose (a representative C5 sugar) to furfural has been studied over W-Nb-O mixed oxides presenting hexagonal or pseudo-crystalline Bronze-type structure with controlled textural and acid properties, and also high stability under reaction conditions. Thus, a series of W-Nb-O metal oxides with different W/Nb ratios have been prepared hydrothermally, characterized by several physicochemical techniques and tested in autoclave-type reactors in liquid phase. Their influence on the catalytic activity has been assessed by tuning the Brønsted/Lewis acid properties of W-Nb-O materials. Interestingly, optimal catalytic results for the dehydration of xylose to furfural in monophasic system (water/ethanol mixture) were achieved for W0.20Nb0.80Ox catalyst, with a furfural selectivity comparable to that of sulfuric acid industrial catalyst. Furfural productivity (0.683 gFur ¿ gCat ¿ 1 ¿ h¿ 1) attained with this W-Nb-O catalyst was higher than that calculated for most relevant and recently reported solid acid catalysts working in both mono- and bi-phasic systems, respectively. Catalytic activity of W-Nb-O material remained practically unchanged after three consecutive reuses, while structure and chemical composition of material were maintained unaltered either after three catalytic cycles or after 14 days experiment carried out under optimal reaction conditions. Reactivity results have been explained on the combination of both Brønsted and Lewis acid sites as a result of the different incorporation of niobium into the bronze structure., Authors thank financial support by the Spanish Government (PID2021-125897OB-I00, PID2021-126235OB-C31, and PID2023- 151036OA-I00) funded by MCIN/AEI/10.13039/501100011033 and FEDER funds. Financial support by European Commission, H2020 Pro-gram (HIGFLY Project, grant agreement N degrees 101006618) is gratefully acknowledged. J.L.-S. acknowledges grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF +) . Authors also thank Miriam Parreño-Romero and the Electron Microscopy Service of Universitat Politècnica de València for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of Cs-W-V-O hexagonal tungsten bronzes for the partial oxidation of ethanol to acetaldehyde

  • Gagliardi, Anna
  • De Arriba-Mateos, Agustín
  • Delgado-Muñoz, Daniel
  • Vallejo, Maria Jose
  • López-Sánchez, Jesús
  • Tabanelli, Tommaso
  • Rubio-Zazo, Juan
  • Cavani, Fabrizio
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] While bioethanol has been acknowledged as a relevant bioderived feedstock, acetaldehyde is an important commodity used to produce a variety of industrial chemicals, and its manufacture currently relies almost exclusively on fossil ethylene. This paper shows the effect of Cs-content in W-V-O hexagonal tungsten bronze catalysts on changes in both the physicochemical characteristics of catalysts and their catalytic performance in the aerobic transformation of ethanol to acetaldehyde, providing a promising pathway to broaden the domain of biorefinery products. The catalytic results were explained on the basis of the elimination of acid sites (responsible to the formation of ethylene and diethyl ether) by the incorporation of Cs+, as interstitial cations, in V-containing hexagonal tungsten bronzes. The catalysts were characterized by XRD, IR, XPS and FESEM, among others, and the incorporation of Cs+ into the bronze backbone, successfully demonstrated by HAXPES and confocal Raman techniques, led to 33% EtOH conversion and 97% acetaldehyde selectivity in the best catalyst¿s formulation,, The funding received for this study from the Spanish Ministry of Science and Innovation, PID2021-126235OB-C31, PID2021-122980OBC5 and PID2023-151036OA-I00 funded by MCIN/AEI/10.13039/501100011033 and FEDER funds, and projects TED2021-130756B-C32 and RYC2022-035912-I funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe by the European Union NextGenerationEU/PRTR, is acknowledged. Authors would also like to thank the European Synchrotron Radiation Facility (beamtime project A25-02-1068), MICIN and Consejo Superior de Investigaciones Científicas for the use of the synchrotron radiation facilities through project PIE 2010 6 0E 013 and to the BM25-SpLine staff for their valuable help.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Beyond conventional characterization: Defect engineering role for sensitivity and selectivity of room-temperature UV-assisted graphene-based NO₂ sensors

  • Peña, Álvaro
  • López-Sánchez, Jesús
  • Sacco, Leandro
  • Vollebregt, Sten
  • Marqués-Marchán, Jorge
  • Horrillo, Carmen
  • Marín, Pilar
  • Matatagui, Daniel
10 páginas, 6 figuras, 1 tabla, The term graphene-based gas sensors may be too broad, as there are many physicochemical differences within the graphene-based materials (GBM) used for chemiresistive gas sensors. These differences condition the sensitivity, selectivity, recovery, and ultimately the sensing performance of these devices towards air pollutants. Continuous ultraviolet irradiation aids in the desorption of gas molecules and enhances sensor performance. Under these conditions, the devices from this work can reliably monitor NO2 and CO at room temperature, below the human-recommended exposure limits, presenting NO2 LoD down to ~20 ppb. By selecting GBMs with different levels of defectivity, which influence gas adsorption dynamics, and through comprehensive charac- terization, including D, D′, D″, 2D, and G Raman bands, graphene-based gas sensors can be tailored to meet specific sensing requirements. This study examines five different non-oxidized GBM to develop tools and gain a deeper understanding of the relationships between GBM properties and their sensing performance. This research introduces a new standard for defect assessment, moving beyond graphene’s D and G Raman band intensity ratio, to facilitate the successful integration of graphene-based gas sensors into everyday applications, such as envi- ronmental monitoring and industrial safety, and potentially impacting other 2D materials, thereby reducing health risks associated with air pollution., Author A. P. received funding from grant PRE2019-0875001234, Ministerio de Ciencia e Innovaci´on (MCIN), Spain. Authors A. P., D. M., P. M., and M-C. H. received funding from project PDC2022-133039- I00 and PID2021-123112OB-C21 from MCIN/AEI/10.13039/ 501100011033, Spain and European Union Next Generation EU/PRTR. D. M. acknowledges financial support from grant RYC2021-031166-I funded by MCIU/AEI/10.13039/501100011033. J. L.-S. acknowledges the financial support from PID2023-151036OA-I00 funded by MCIU/ AEI/10.13039/501100011033 and by the European Union, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/ 501100011033 and by the European Social Fund Plus (ESF+). JM thanks the Regional Government of Madrid for the project P2018/NMT- 4321 NANOMAGCOST. M-C. H acknowledges the support from the COST Action CA21101, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reaction-sintered zircon-based nanostructured coatings obtained by suspension plasma spraying

  • Rosado, Eduardo
  • Cañas, E.
  • López-Sánchez, Jesús
  • Sánchez, E.
  • Moreno, Rodrigo
Zircon (ZrSiO4) is an inexpensive and widely available material with excellent thermal properties that makes it an ideal candidate for thermal barrier coatings. Previous works have demonstrated the feasibility of obtaining coatings with a high retention of zircon by plasma spraying of ZrSiO4 and ZrSiO4/ZrO2 suspensions. Suspensions of ZrSiO4/Al2O3 and ZrSiO4/TiO2 were produced by dispersing a micrometric zircon powder into alumina and titania colloidal sols, optimising their colloidal stability and rheological behaviour. Optimised slurries were plasma sprayed onto metallic substrates, obtaining coatings with the typical morphologies obtained by suspension plasma spraying (SPS). Nanostructured coatings with nanoparticles embedded in the molten matrix were obtained at higher proportions of sprayed colloidal sol. The high retention of ZrSiO4 in the final coatings and the formation of new crystallographic phases of mullite and zirconium titanate by reaction of the by-products of zircon decomposition (SiO2 and ZrO2) and the Al2O3 and TiO2 colloids was demonstrated. © 2024 The Authors, This research was funded by the Spanish Ministry of Science,Innovation and Universities (MCIU), the State Research Agency (AEI) and the European Regional Development Fund (FEDER) under project PID2021-124521OB-I00 and pre-doctoral fellowship PRE2019-091092. J. L.-S. acknowledges the financial support from Spanish Ministry of Economic Affairs and Digital Transformation (MINECO) through the project PID2021-122980OB-C51MCIN and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+) .r Innovation and Universities (MCIU) , the State Research Agency (AEI) and the European Regional Development Fund (FEDER) under project PID2021-124521OB-I00 and pre-doctoral fellowship PRE2019-091092. J. L.-S. acknowledges the financial support from Spanish Ministry of Economic Affairs and Digital Transformation (MINECO) through the project PID2021-122980OB-C51MCIN and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+) . +) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferroelectric domain structure in Bi4Ti3O12 ceramics: Insights from Confocal Raman Microscopy

  • Moure Arroyo, Alberto
  • López-Sánchez, Jesús
  • Campo, Ángel Adolfo del
  • Navarro-Rojero, M. G.
  • Fernández Lozano, José Francisco
  • Rubio Marcos, Fernando
Bismuth Layer-Structured Ferroelectric (BLSF) materials with Bi4Ti3O12 composition exhibit high ferroelectricity, potential for high-temperature piezoelectricity, and the puzzle of low polarizability, explored via textured ceramics and domain configurations. Here, we show that a distinctive stripe configuration of 90° domains emerges for large platelet-like grains, while the smallest grains, possessing a more equiaxial morphology, exhibit a needle-like domain structure that significantly impacts the ferroelectric properties of the ceramics. The observed hysteresis loops suggest that polarization is effectively clamped, owing to reduced mobility along the needle-like domain walls, thereby leading to a reduction in remnant polarization as grain size diminishes. It is elucidated that the domain structure is intricately linked to both internal stress within the grains and the presence of defects, notably oxygen vacancies, at the domain walls. Consequently, these multifaceted factors are identified as key determinants of the ferroelectric activity within ceramics bearing such a distinctive crystalline structure. © 2024 The Authors, Financial support from the Spanish Ministry of Science and Innovation through PID2020-114192RB-C41 and TED2021-130957B-C51 projects. F. R-M. is indebted to Comunidad de Madrid for the financial support through the Doctorados Industriales project (IND2020/IND-17375), which is co-financed by the European Social Fund. J. L.-S. acknowledges the financial support from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comprehensive characterization and structural modelling of lithium ferrites

  • Granados-Miralles, Cecilia
  • Marco, J.F.
  • Serrano Rubio, Aída
  • Gorni, Giulio
  • López-Sánchez, Jesús
  • Castellano-Soria, Alberto
  • Navarro, Elena
  • Marín, Pilar
  • Rubio-Zuazo, J.
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
13 pages, 8 figures, 2 tables, The character and magnitude of the properties of lithium ferrites depend on the specific polymorph stabilized. Reliable polymorph identification and quantitative analysis have been realized by complementary structural characterization techniques (synchrotron X-ray diffraction, 57Fe M¨ossbauer and X-ray absorption spectroscopies), through fitting/modelling of the experimental datasets to appropriate mathematical models. Calculated sample compositions show a maximum offset of 7 wt% between techniques, and cation distribution on the spinel-like LiFe5O8 material has yielded values ranging from 60 to 67 at% Fe3+ in octahedral sites with respect to the total number of Fe3+cations in the spinel phase. Magnetic transition temperatures (i.e., N´eel/Curie) in the order of 91–93 K and 893–898 K have been measured for LiFeO2 and LiFe5O8, respectively. The combined characterization presented here is brought forward as a reliable method to establish the relative concentrations of polymorphs in ferrites, a strategy which can be expanded to other families of Fe-based materials., This work has been supported by grants PID2021–124585NB-C31, PID2021–124585NB-C33, and PID2023–151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, grants TED2021–130957B-C51, CNS2022–135876, RYC2021–031181-I, and RYC2021–031236-I funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, and grants RYC- 2017–23320, and RYC2022–035912-I funded by MICIU/AEI/10.13039/ 501100011033 and by “ESF Investing in your future”. XAS experiments were performed at the BL22-CLÆSS beamline at ALBA Synchrotron with the collaboration of ALBA staff (experiment n. 2022025654). The MICIU, and CSIC are acknowledged for provision of synchrotron radiation facilities at BM25-SpLine and for financial support through the projects PE-2010 6 0E 013 and PE-2021 60 E 030. The authors sincerely acknowledge the ESRF (France), the MCINN, and the Consejo Superior de Investigaciones Científicas (CSIC, Spain) for their financial and technical support under proposal number A25–02–1009, as well as the BM25-SpLine staff for their assistance in the use of the synchrotron radiation facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local control of perpendicular magnetic anisotropy of Pd/Co multilayers via ion bombardment

  • Sebastiani-Tofano, Eugenia
  • Parente, Ana
  • Alcázar Ruano, Pedro L.
  • Abuín, Manuel
  • González-García, Álvaro
  • López-Sánchez, Jesús
  • Rubio-Zuazo, J.
  • Manso Silvan, M.
  • Mascaraque, Arantzazu
  • González Barrio, Miguel Ángel
  • Menghini, Mariela
  • Schuller, Ivan K.
  • Basaran, Ali C.
  • González, Elvira M.
  • Rodríguez de la Fuente, Óscar
  • Muñoz-Noval, A.
In this work, we have controlled locally the magnetic anisotropy of PdCo multilayers using ion beam modification. First, we have used techniques with different probing depths to confirm that cobalt is partially oxidized in the Pd/Co multilayers exhibiting PMA fabricated by sputtering, presumably due to the diffusion of atmospheric oxygen migrated through the Pd capping layer. Then, low energy ion bombardment has been employed to induce a structural disorder in the upper layers of the multilayer, gradually reducing the PMA at local scale with increasing ion doses. Medium ion doses lead to a marked decline in PMA, resulting in equivalent magnetic anisotropy directions and the loss of characteristic labyrinthine magnetic domain morphology. High ion doses completely suppress PMA, yielding a typical in-plane shape anisotropy. By combining controlled PMA reduction via lithographic techniques, we create elongated structures displaying distinct magnetic responses; bombarded regions exhibit reduced PMA, whereas adjacent regions maintain their PMA. Notably, regions with reduced PMA do not disrupt the distribution of perpendicular magnetic domains in neighboring PMA regions, even at widths as narrow as 500 nm, demonstrating the robustness of the PMA domain structure., The authors acknowledge financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación, Spain, through projects PID2021–122980OB-C51, PID2021-122980OB-C52, PID2021-126323OA-I00 and CNS2023-144128; from Ministerio de Universidades (Salvador de Madariaga program) through research stay PRX21/00740. Authors also acknowledge funds from European Commission through MAGNAMED 734801 project (H2020-MSCA-RISE-2016), as well as from 2018-T1/IND-10360 Talento Program and project TEC-2024/TEC-380 “Mag4TIC” from Comunidad de Madrid. The authors are also grateful to the SpLine staff for their valuable help during experiment No. 25-02-1002 and for the financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades and Consejo Superior de Investigaciones Científicas under Grant Nos. 2010 6O E 013, 2021 60 E 030 and CEX2024-001445-S. J. Romero from the C.A.I de Técnicas Físicas-UCM is acknowledged for the SQUID measurements. J.L.-S. acknowledges the financial support from grant PID2023-151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF + ). M.M.S. acknowledges projects PID2020-112770RB-C22 and PID2023-151371OB-C22, funded by MCIN/AEI/10.13039/501100011033 and FEDER, EU. A.G-G. thanks Universidad Complutense de Madrid and Banco Santander (CT82/20-CT83/20) for financial support. M.M. acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2020-001039-S). Work at UCSD was supported by the U.S. Department of Energy’s Office of Basic Energy Science under Grant DE-FG02-87ER45332., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S; CEX2020-001039-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-Operando local structural response of Si-based press-fit PN-junction diodes

  • Román, Sara
  • Moure Arroyo, Alberto
  • López-Sánchez, Jesús
  • Rubio-Zuazo, J.
  • Campo, Ángel Adolfo del
  • Oujja, Mohamed
  • Calvo, Rodrigo
  • Sánchez-Prieto, Jesús
  • Lorite, Israel
  • Fernández Lozano, José Francisco
  • Serrano Rubio, Aída
[Data Statement] Data will be made available on request., Understanding the local structural evolution of silicon-based press-fit diodes under real operating conditions is critical for the development of reliable power electronic components. During operation, these diodes are exposed to high electric currents, leading to significant overheating and the generation of interfacial stresses caused by mismatches in the thermal expansion coefficients of the constituent materials in the device. These effects are further influenced by the doping profiles of the semiconductor junctions. In this study, we examine the structural response of single-crystal silicon in commercial press-fit power diodes both under room conditions (room temperature and no applied current) as well as under real current-driven operating conditions, focusing on localized regions defined by the doping profiles of three different PN-junction-based devices. The presence of dopants, along with the current-induced strain and thermal effects in the silicon lattice, leads to structural changes that directly impact device performance. By employing advanced in-operando characterization techniques, we resolve, for the first time, localized interfacial and region-dependent structural phenomena within operating press-fit diodes and establish direct correlations between lattice distortions, interfacial behavior, and doping concentration. These results provide new insights into the microscopic mechanisms governing reliability and degradation in high-power silicon devices under realistic working conditions., This work was supported by the Consejo Superior de Investigaciones Científicas (CSIC) under project AFICHES (No. 202460E101). S.R.-S. acknowledges the financial support from the FARDIO project to SEG Automotive Germany GmbH. J.L.-S. acknowledges the financial support from grant PID2023-151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF +). A.S. acknowledges the financial support from Spanish Ministry for Science and Innovation (MCIN) for a Ramón y Cajal contract (No. RYC2021-031236-I) funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and the project PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’. The authors acknowledge the support from the ‘Centro de Microanalisis de Materiales (CMAM)—Universidad Autonoma de Madrid’, for the beam time proposals with codes IMP019/22 and IMP013/23; and its technical staff for their contribution to the operation of the accelerator. We thank Gastón García and José Olivares for helpful discussions and reading of the manuscript. The authors also acknowledge the European Synchrotron Radiation Facility (ESRF), the MCIN and the CSIC for provision of synchrotron radiation facilities under proposal numbers A25-02-940, A25-02-997, A25-02-1030, MA-5391 and A25-02-1074, as well as for the funding through the projects PIE-2010-6-0E-013 and PIE-2021-60-E-030. We would like to thank technical staff for their assistance and support in using beamline BM25-SpLine., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photocontrol of nitrogen sites for poisoning-free NO₂ sensing

  • Pérez-Román, Berta
  • Matatagui, D.
  • Mazo Fernández, María Alejandra
  • Marín, Pilar
  • Pascual, Laura
  • López-Sánchez, Jesús
  • Rubio Marcos, Fernando
In this communication, we present a comprehensive investigation of the UV photoactivation mechanism in nitrogen-doped carbon-based sensing materials. Here, tailored nitrogen incorporation enables rapid and effective NO₂ detection, driven by the synergistic interplay between the chemical nature and electronic properties of fundamentally graphitic-, pyridinic- and pyrrolic-N species. The influence of 275 nm UV power density is probed via in-situ confocal Raman microscopy measurements. The results reveal its critical role in the desorption process and its correlation with microstructural features and nitrogen species functionalization. Interestingly, the combination of hierarchical porous structure with high SBET (2783 m2/g), a large number of structural defects, and nitrogen doping through different species, promotes p- and n-type behaviors. This scenario leads to superior sensing performance. At 7 mW/cm2, the device shows poisoning-free operation, 11.76%/ppm sensitivity, and a detection limit of 2.55 ppb. Therefore, the work advances a technologically demanding solution to achieve practical monitoring of NO₂ at room temperature in the sub-ppm range, with high sensitivity, rapid recovery, and stability against poisoning. © 2026 The Authors, The authors acknowledge funding support from projects PID2024-156318OB-I00, PID2024-156318OB-I00, PID2023-151036OA-I00, PDC2022-133039-I00, PID2021-123112OB-C21, TED2021-132800B-I00, and TED2021-129688B-C21 funded by MCIU/AEI/10.130 39/501100011033 and the European Social Fund Plus (ESF+). We also acknowledge PERTE-VEC INVECPRO for the financial support of the EU within the frame of the initiative Next Generation EU (Proyecto Estrat´egico para la Recuperaci´on y Transformaci´on Econ´omica en el sector del Vehículo El´ectrico y Conectado). J. L.-S. acknowledges the financial support from grant RYC2022-035912-I funded by MCIU/AEI/ 10.13039/ 501100011033 and by the European Social Fund Plus (ESF+). D. M extents gratitude to financial support within the RYC2021-031166-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+). F. R-M and B. P-R also express gratitude to Comunidad de Madrid for financial support through the Industrial Doctorates project (IND2020/IND-17375), co-financed by the European Social Fund., Peer reviewed