Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Tunable Iron–Cobalt Thin Films Grown by Electrodeposition

  • Gonçalves, Sofia
  • Andrade, Vivian
  • Tavares De Sousa, Célia
  • Araújo, João P.
  • Belo, João H.
  • Apolinário, Arlete
Iron–cobalt (FeCo) alloys are highly desirable for their exceptional and adjustable physicochemical properties, particularly in the form of thin films. This study focuses on the growth of iron–cobalt (FeCo) alloy thin films using potentiostatic electrodeposition. The effects of applied voltage and FeCo stoichiometry on the morphology, structure, and magnetic properties of the films are investigated. The results indicate that the electrodeposition potential does not affect the overall stoichiometry or the structural and magnetic properties. However, it does impact film thickness and grain sizes. Higher applied potentials lead to thicker films with faster growth rates, as well as smoother and more homogeneous films with smaller grains. Films with different Fe:Co ratios (Fe90Co10, Fe50Co50, and Fe10Co90) are obtained, and their compositions have a direct impact on morphology, with the amount of Fe influencing film thickness, growth rates, and grain sizes. Increasing Fe content (50, 90%) leads to thicker films and smaller grains. Films with low Fe content (10%) exhibit a face-centered cubic (fcc) structural phase instead of the typical body-centered cubic (bcc) structure. All FeCo alloys display soft magnetic properties with characteristic coercivities, and the low Fe (10%) sample with the fcc structure exhibits the highest coercivity among all the samples. The nucleation and growth mechanisms are investigated using electrodeposition curves and the Scharifker and Hills model. Increasing the applied potential leads to thicker films and higher growth rates, with the nucleation mechanism identified as instantaneous nucleation in the diffusion-controlled regime, A.A. acknowledges FCT—Fundação para a Ciência e a Tecnologia, contract DL57/2016 (ref. SFRH/BPD/82010/2011) and project H2FlexiPECs’s (ref. 2022.07332.PTDC); J.H.B. acknowledges FCT, the contract DL57/2016 (ref. SFRH-BPD-87430/2012), project PTDC/FISMAC/31302/2017, PARSUK BRF project SMARTX, project NORTE-01-0145-FEDER-022096, and project PTDC/EMETED/3099/2020; C.T.S. aknowledges IF/01159/2015 and program Atraccion de Talento (CAM), ref. 2020-T1/IND19889; The authors also acknowledges the funding by FCT and projects NORTE-01-0145-FEDER-000076 (H2INNOVATE), NORTE-01-0145-FEDER-022096 (NECL), CERN/FIS-TEC/0003/2021, POCI-01-0141-FEDER-032527, PTDC/FIS-MAC/31302/2017, PTDC/CTM-CTM/28676/2017, POCI-01-0145-FEDER031575 and POCI-01-0145-FEDER-032257 MSCA-RISE-734801-MAGNAMED; Strategic Funding contract IFIMUP—Institute of Physics for Advanced Materials, Nanotechnology and Photonics—University of Porto, UIDB/04968/2020, UIDB/04968/2021, and Laboratory of Physics for Materials and Emergent Technologies contract LA/P/0095/2020. VMA thanks CNPq for the PCI grant 301641/2023-4
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Multifunctional targeted solid lipid nanoparticles for combined photothermal therapy and chemotherapy of breast cancer

  • Granja, Andreia
  • Lima Sousa, Rita
  • Alves, Cátia G.
  • de Melo Diogo, Duarte
  • Nunes, Claudia
  • Tavares De Sousa, Célia
  • Correia, Ilídio J.
  • Reis, Salette
Photothermal therapy has emerged as a new promising strategy for the management of cancer, either alone or combined with other therapeutics, such as chemotherapy. The use of nanoparticles for multimodal therapy can improve treatment performance and reduce drug doses and associated side effects. Here we propose the development of a novel multifunctional nanosystem based on solid lipid nanoparticles co-loaded with gold nanorods and mitoxantrone and functionalized with folic acid for dual photothermal therapy and chemotherapy of breast cancer. Nanoparticles were produced using an economically affordable method and presented suitable physicochemical properties for tumor passive accumulation. Upon Near-Infrared irradiation (808 nm, 1.7 W cm−2, 5 min), nanoparticles could effectively mediate a temperature increase of >20 °C. Moreover, exposure to light resulted in an enhanced release of Mitoxantrone. Furthermore, nanoparticles were non-hemolytic and well tolerated by healthy cells even at high concentrations. The active targeting strategy was found to be successful, as shown by the greater accumulation of the functionalized nanoparticles in MCF-7 cells. Finally, the combined effects of chemotherapy, light-induced drug release and photothermal therapy significantly enhanced breast cancer cell death. Overall, these results demonstrate that the developed lipid nanosystem is an efficient vehicle for breast cancer multimodal therapy, This work was supported from PT National Funds (FCT/MCTES, Fundaçao para a Ciencia e Tecnologia and Ministério da Ciencia, Tecnologia e Ensino Superior) from the project UIDB/50006/2020. This work was also supported by POCI-01-0145-FEDER-031462 and PTDC/BTA-BTA/0696/2020. Andreia Granja acknowledges funding from FCT for the PhD fellowship SFRH/BD/130147/2017. Rita Lima-Sousa and Catia G. Alves acknowledge funding from individual PhD fellowships from FCT (SFRH/BD/144922/2019 and SFRH/BD/145386/2019). Duarte de Melo-Diogo acknowledges FCT for the financial support given through a Junior Researcher contract (2021.00590.CEECIND). Claudia Nunes acknowledges FCT for the financial support through a Assistant Rsearcher contract (2022.05608). Célia T. Sousa acknowledges the program Atraccion de Talento (CAM), ref. 2020-T1/IND-19889, the UE's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant no. 734801 and Comunidad de Madrid (Spain), project no. 2022/BMD-7434. The authors are also grateful for the technical support from the Laboratory of Structural Analysis and the Imaging by Confocal and Fluorescence Lifetime Laboratory, at CEMUP, Porto, Portugal. The authors also acknowledge Doctor Tania Moniz for support in the NMR data analysis
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Magnetic properties of permalloy antidot arrayfabricated by interference lithography

  • Silva, A. S.
  • Hierro Rodríguez, A.
  • Bunyaev, S. A.
  • Kakazei, Gleb N.
  • Dobrovolskiy, O. V.
  • Redondo Esteban, Carolina
  • Morales Arboleya, Rafael
  • Crespo, H.
  • Navas Otero, David
The interference laser lithography and ion-beam sputtering have been reported. Magneto-optical Kerr effect magnetometry indicated that the sample exhibits four-fold anisotropic behaviour, i.e. different magnetization loops were observed when the external magnetic field was applied along either x-or y-axis, or along the array diagonal. Broadband ferromagnetic resonance measurements revealed a rich variety of different magnetization configurations in the unsaturated state that can be controlled by the orientation of the external magnetic field. Micromagnetic simulations have been performed to explain the observed results. On the contrary, in the saturated regime the system demonstrated almost isotropic magnetic behaviour that improves with external field increase. The obtained results show the potential of interference lithography for the fabrication of large area antidot arrays. (C) 2019 Author(s)., The Portuguese team acknowledges the Network of Extreme Conditions Laboratories-NECL and Portuguese Foundation of Science and Technology (FCT) support through the projects NORTE-01-0145-FEDER-022096, MIT-EXPL/IRA/0012/2017, POCI-01-0145-FEDER-031302, EXPL/IF/01191/2013 (D.N.), EXPL/IF/00541/2015 (S.A.B.), EXPL/IF/00981/2013 (G.N.K). D.N., G.N.K., C.R and R.M. acknowledge the support by the European Union Horizon 2020 Research and Innovation Programme under Marie Sklodowska-Curie Grant Agreement EU H2020-MSCA-RISE-2016 (No 734801). The Spanish team acknowledges the support from Spanish MINECO through the grant FIS2016-76058 (AEI/FEDER, UE). A.H.-R. acknowledges the support from European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Action (reference H2020-MSCA-IF-2016-746958). G.N.K. and O.V.D. acknowledge the support from European Cooperation in Science and Technology (COST) project CA16218 "NANOCOHYBRI."
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Magnetic nanostructures for emerging biomedical applications

  • Peixoto, L.
  • Magalhães, R.
  • Navas, D.
  • Moraes, S.
  • Redondo Esteban, Carolina
  • Morales Arboleya, Rafael
  • Araújo, J. P.
  • Sousa, C. T.
Magnetic nanostructures have been widely studied due to their potential applicability into several research fields such as data storage, sensing and biomedical applications. Focusing on the biomedical aspect, some new approaches deserve to be mentioned: cell manipulation and separation, contrast-enhancing agents for magnetic resonance imaging, and magnetomechanically induced cell death. This work focuses on understanding three different magnetic nanostructures, disks in the vortex state, synthetic antiferromagnetic particles and nanowires, first, by explaining their interesting properties and how they behave under an applied external field, before reviewing their potential applications for each of the aforementioned techniques., The authors acknowledge funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement No. 734801. C.R. and R.M. acknowledge funding from Basque Government Grant Nos. PIBA 2018-11 and IT1162-19, and Spanish Grant No. FIS2016-76058 (AEI/FEDER, UE). D.N. acknowledges the Spanish Ministry for Science, Innovation and Universities, for funding through the “Ramon y Cajal” program RYC-2017-22820. C.T. Sousa thanks FCT for financial support through the Investigador FCT program (Contract No. IF/01159/2015). R. Magalhães is grateful to the FCT SFRH/BD/148563/2019 PhD grant. This work was also supported by the Portuguese Fundação para a Ciência e a Tecnologia (FCT) and COMPETE 2020 (FEDER) under the projects POCI-01-0145-FEDER-028676/PTDC/CTM-CTM/28676/2017, POCI-01-0145/FEDER-032257/PTDC/FIS-OTI/32257/2017, POCI-01-0145-FEDER031302/PTDC/FIS-MAC/31302/2017, and POCI-01-0141-FEDER032527.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Double-walled iron oxide nanotubes via selective chemical etching and Kirkendall process

  • Azevedo, João
  • Fernández-García, Maria Paz
  • Magén, César
  • Mendes, Adélio
  • Araújo, J. P.
  • Sousa, Célia T.
Double-walled oxide nanotube structures are interesting for a wide range of applications, from photocatalysis to drug delivery. In this work, a progressive oxidation method to fabricate double-walled nanotube structures is reported in detail. The approach is based on the electrodeposition of metallic iron nanowires, in porous alumina templates, followed by a selective chemical etching, nanoscale Kirkendall effect, a fast oxidation and out-diffusion of the metallic core structure during thermal annealing. To validate the formation mechanism of such core-shell structure, chemical composition and atomic structure were assessed. The resulting hematite nanotubes have a high degree of uniformity, along several microns, and a nanoscopic double-walled structure., J. Azevedo would like to acknowledge the Portuguese Foundation for Science and Technology (FCT) for funding (CEECIND/03937/2017). C.T. Sousa thanks FCT for financial support through the Investigador FCT program (Contract No. IF/01159/2015). M.P. Fernández-García acknowledges financial support through Spanish MINECO (research project RTI2018-094683-B-C52); Gobierno del Principado de Asturias and FICyT (through research project FC-GRUPIN-IDI/2018/000185) and University of Oviedo for R&D project 2018/00061/008 in the competitive call PAPI-18-EMERG-8. The authors are thankful to Elettra Sincrotrone for allocating beam-time and their experimental facilities. This work was partially supported by the Project POCI-01-0145-FEDER-006939 (Laboratory for Process Engineering, Environment, Biotechnology and Energy – LEPABE and “SunStorage - Harvesting and storage of solar energy”, with reference POCI-01-0145-FEDER-016387, funded by European Regional Development Fund (ERDF), through COMPETE 2020 - Operational Programme for Competitiveness and Internationalization (OPCI), by FCT - Portuguese Foundation for Science and Technology I.P. This work was financially supported by: Project PTDC/EQU-EQU/30510/2017 - POCI-01-0145-FEDER-030510 – Sunflow “Solar energy storage into redox flow batteries” funded by FEDER funds through COMPETE2020 - Programa Operacional Competitividade e Internacionalização (POCI) and by national funds (PIDDAC) through FCT/MCTES. This work was also supported by the Portuguese Fundação para a Ciência e Tecnologia (FCT) and COMPETE 2020 (FEDER) under the projects POCI-01-0141-FEDER-032527, PTDC/FIS-MAC/31302/2017, MIT-EXPL/IRA/0012/2017, PTDC/CTM-CTM/28676/2017 and PTDC/FIS-OTI/32257/2017 and the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant Agreement No. 734801., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Macroscopic and microscopic magnetic properties of Co/Pd multilayers

  • Soriano, N.
  • Mora, B.
  • Rollano, Víctor
  • Gargiani, Pierluigi
  • Quirós, Carlos
  • Gálvez, Fernando
  • Redondo, Carolina
  • Valle, Javier del
  • Montoya, I.
  • Gómez, Alicia
  • González, Elvira M.
  • Navarro, Elena
  • Vélez, María
  • Alameda, J. M.
  • Valvidares, S. M.
  • Vicent, J. L.
  • Morales, Rafael
Resumen del póster presentado al 10th International Symposium on Metallic Multilayers (MML), celebrado en Madrid (España) del 17 al 21 de junio de 2019., Co/Pd multilayers can exhibit perpendicular magnetic anisotropy (PMA) for ultrathin thicknesses of Co and Pd layers. The PMA magnitude depends on several parameters, as the thickness of each constituent layer, the quality of the Co-Pd interface, the crystallinity of the film, or the total number of layers. In this work we present the PMA dependence with the number of Co/Pd repetitions. Such dependence was investigated by magnetometry and synchrotron light techniques. Magnetization curves obtained by SQUID magnetometer provide macroscopic parameters, as the interfacial and effective anisotropy of the multilayers, or the net magnetization of the sample. In addition, x-ray magnetic circular dichroism (XMCD) reveal microscopic details, as the anisotropy of the atomic angular momentum, the magnitude of the Co spin moment, or the hybridization of Co-Pd orbitals at the interface. Both kinds of results are combined to show a clear picture of the PMA evolution with the number of repetitions. A correlation between macroscopic and microscopic parameters is established in the whole range of thicknesses, from 2 to 40 Co/Pd repetitions., Work supported by FIS2016-76058 (AEI/FEDER, UE), H2020-MSCA-RISE-2016-734801, and Basque Government - PIBA 2018-11.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Layer-dependence of macroscopic and atomic magnetic correlations in Co/Pd multilayers

  • Soriano, N.
  • Mora, B.
  • Rollano, Víctor
  • Gargiani, Pierluigi
  • Quirós, Carlos
  • Gálvez, Fernando
  • Redondo, Carolina
  • Valle, Javier del
  • Montoya, I.
  • Gómez, Alicia
  • González, Elvira M.
  • Navarro, Elena
  • Vélez, María
  • Alameda, J. M.
  • Valvidares, S. M.
  • Vicent, J. L.
  • Morales, Rafael
The development of multilayered materials with engineered magnetic properties compels a deep knowledge of physical properties at the atomic scale. The magnetic anisotropy is a key property in these materials. This work accounts for the magnetic anisotropy energy and its correlation with atomic properties of Co/Pd multilayers with the number of Co/Pd repetitions. Magnetometry measurements confirm stronger perpendicular magnetic anisotropy energies as the number of repetitions increases up to 40. However, the intrinsic anisotropy, related to the Co–Pd orbital hybridization and spin–orbit coupling, saturates at 15 repetitions. This finding is supported by x-ray magnetic circular dichroism analysis that reveals a direct correlation of the atomic Co and Pd orbital magnetic moments and the effective anisotropy of the system. The proximity effect that accounts for the Pd induced magnetization, along with the increasing Co moment, provides a suitable mechanism for the observed anisotropy energy layer dependence., This work received funding from the MINECO-AEI FIS2016-76058, UE FEDER “Una manera de hacer Europa”; the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Grant No. 734801, and the Basque Country Grant Nos. IT1162-19 and PIBA 2018-11. UPV/EHU authors are thankful for the technical and human support provided by the laser facility, x-ray service, electron microscopy, and magnetic measurement units of SGIker UPV/EHU. We acknowledge the access to BL29 at ALBA synchrotron light facility via official Proposal No. 2015091407. M.V. acknowledges funding via MINECO [Grant No. FIS2016-78591-C3-2-R (AEI/FEDER, UE)]. IMDEA Nanociencia acknowledges the support from the “Severo Ochoa” Program for Centers of Excellence in R&D (MINECO, Grant No. SEV-2016-0686). R.M. acknowledges enlightening discussions with Dr. Arturo Ponce-Pedraza (UTSA) on TEM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local control of perpendicular magnetic anisotropy of Pd/Co multilayers via ion bombardment

  • Sebastiani-Tofano, Eugenia
  • Parente, Ana
  • Alcázar Ruano, Pedro L.
  • Abuín, Manuel
  • González-García, Álvaro
  • López-Sánchez, Jesús
  • Rubio-Zuazo, J.
  • Manso Silvan, M.
  • Mascaraque, Arantzazu
  • González Barrio, Miguel Ángel
  • Menghini, Mariela
  • Schuller, Ivan K.
  • Basaran, Ali C.
  • González, Elvira M.
  • Rodríguez de la Fuente, Óscar
  • Muñoz-Noval, A.
In this work, we have controlled locally the magnetic anisotropy of PdCo multilayers using ion beam modification. First, we have used techniques with different probing depths to confirm that cobalt is partially oxidized in the Pd/Co multilayers exhibiting PMA fabricated by sputtering, presumably due to the diffusion of atmospheric oxygen migrated through the Pd capping layer. Then, low energy ion bombardment has been employed to induce a structural disorder in the upper layers of the multilayer, gradually reducing the PMA at local scale with increasing ion doses. Medium ion doses lead to a marked decline in PMA, resulting in equivalent magnetic anisotropy directions and the loss of characteristic labyrinthine magnetic domain morphology. High ion doses completely suppress PMA, yielding a typical in-plane shape anisotropy. By combining controlled PMA reduction via lithographic techniques, we create elongated structures displaying distinct magnetic responses; bombarded regions exhibit reduced PMA, whereas adjacent regions maintain their PMA. Notably, regions with reduced PMA do not disrupt the distribution of perpendicular magnetic domains in neighboring PMA regions, even at widths as narrow as 500 nm, demonstrating the robustness of the PMA domain structure., The authors acknowledge financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación, Spain, through projects PID2021–122980OB-C51, PID2021-122980OB-C52, PID2021-126323OA-I00 and CNS2023-144128; from Ministerio de Universidades (Salvador de Madariaga program) through research stay PRX21/00740. Authors also acknowledge funds from European Commission through MAGNAMED 734801 project (H2020-MSCA-RISE-2016), as well as from 2018-T1/IND-10360 Talento Program and project TEC-2024/TEC-380 “Mag4TIC” from Comunidad de Madrid. The authors are also grateful to the SpLine staff for their valuable help during experiment No. 25-02-1002 and for the financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades and Consejo Superior de Investigaciones Científicas under Grant Nos. 2010 6O E 013, 2021 60 E 030 and CEX2024-001445-S. J. Romero from the C.A.I de Técnicas Físicas-UCM is acknowledged for the SQUID measurements. J.L.-S. acknowledges the financial support from grant PID2023-151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF + ). M.M.S. acknowledges projects PID2020-112770RB-C22 and PID2023-151371OB-C22, funded by MCIN/AEI/10.13039/501100011033 and FEDER, EU. A.G-G. thanks Universidad Complutense de Madrid and Banco Santander (CT82/20-CT83/20) for financial support. M.M. acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2020-001039-S). Work at UCSD was supported by the U.S. Department of Energy’s Office of Basic Energy Science under Grant DE-FG02-87ER45332., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S; CEX2020-001039-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Double-walled iron oxide nanotubes via selective chemical etching and Kirkendall process

  • Azevedo, João
  • Fernández-García, M.P.
  • Magén, César
  • Mendes, Adélio
  • Araújo, João P.
  • Sousa, Célia T.
Double-walled oxide nanotube structures are interesting for a wide range of applications, from photocatalysis to drug delivery. In this work, a progressive oxidation method to fabricate double-walled nanotube structures is reported in detail. The approach is based on the electrodeposition of metallic iron nanowires, in porous alumina templates, followed by a selective chemical etching, nanoscale Kirkendall effect, a fast oxidation and out-diffusion of the metallic core structure during thermal annealing. To validate the formation mechanism of such core-shell structure, chemical composition and atomic structure were assessed. The resulting hematite nanotubes have a high degree of uniformity, along several microns, and a nanoscopic double-walled structure.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Local control of perpendicular magnetic anisotropy of Pd/Co multilayers via ion bombardment

  • Sebastiani Tofano, Eugenia
  • Parente Campos, Ana
  • Alcázar Ruano, Pedro Luis
  • Abuín, Manuel
  • González García, Álvaro Antonio
  • López Sánchez, Jesús
  • Rubio Zuazo, Juan
  • Manso Silván, Miguel
  • Mascaraque Susunaga, Arantzazu
  • González Barrio, Miguel Ángel
  • Menghini, Mariela
  • Schuller, Ivan K.
  • Basaran, Ali C.
  • González Herrera, Elvira María
  • Rodríguez De La Fuente, Óscar
  • Muñoz Noval, Álvaro
In this work, we have controlled locally the magnetic anisotropy of PdCo multilayers using ion beam modification. First, we have used techniques with different probing depths to confirm that cobalt is partially oxidized in the Pd/Co multilayers exhibiting PMA fabricated by sputtering, presumably due to the diffusion of atmospheric oxygen migrated through the Pd capping layer. Then, low energy ion bombardment has been employed to induce a structural disorder in the upper layers of the multilayer, gradually reducing the PMA at local scale with increasing ion doses. Medium ion doses lead to a marked decline in PMA, resulting in equivalent magnetic anisotropy directions and the loss of characteristic labyrinthine magnetic domain morphology. High ion doses completely suppress PMA, yielding a typical in-plane shape anisotropy. By combining controlled PMA reduction via lithographic techniques, we create elongated structures displaying distinct magnetic responses; bombarded regions exhibit reduced PMA, whereas adjacent regions maintain their PMA. Notably, regions with reduced PMA do not disrupt the distribution of perpendicular magnetic domains in neighboring PMA regions, even at widths as narrow as 500 nm, demonstrating the robustness of the PMA domain structure.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Magnetic reversal modes in cylindrical nanostructures: from disks to wires

  • Proença, Mariana|||0000-0002-0003-0491
  • Rial, Javier
  • Araujo, João Pedro Esteves de
  • Sousa, Celia T.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

The magnetic properties of fe/cu multilayered nanowires: The role of the number of fe layers and their thickness

  • Caspani, Sofía|||0000-0002-1996-768X
  • Moraes, Suellen Silveira|||0000-0003-3110-2424
  • Navas Otero, David|||0000-0002-2044-486X
  • Proença, Mariana|||0000-0002-0003-0491
  • Magalhães, Ricardo|||0000-0003-1341-9719
  • Nunes, Claudia
  • Araujo, João Pedro Esteves de|||0000-0002-1646-7727
  • Sousa, Célia T.|||0000-0003-2879-0051