Pasar al contenido principal

FASES MAGNETICAS DE INTERES TECNOLOGICO BASADAS EN MATERIALES LIBRES DE ELEMENTOS CRITICOS

PID2023-151036OA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dehydration of xylose to furfural catalyzed by highly stable W-Nb-O mixed oxides Bronzes

  • Cernicharo-Toledo, Francisco
  • Domine, Marcelo Eduardo
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • De Arriba-Mateos, Agustín
  • López Sánchez, Jesús
[EN] In this work, the dehydration reaction of xylose (a representative C5 sugar) to furfural has been studied over W-Nb-O mixed oxides presenting hexagonal or pseudo-crystalline Bronze-type structure with controlled textural and acid properties, and also high stability under reaction conditions. Thus, a series of W-Nb-O metal oxides with different W/Nb ratios have been prepared hydrothermally, characterized by several physicochemical techniques and tested in autoclave-type reactors in liquid phase. Their influence on the catalytic activity has been assessed by tuning the Brønsted/Lewis acid properties of W-Nb-O materials. Interestingly, optimal catalytic results for the dehydration of xylose to furfural in monophasic system (water/ethanol mixture) were achieved for W0.20Nb0.80Ox catalyst, with a furfural selectivity comparable to that of sulfuric acid industrial catalyst. Furfural productivity (0.683 gFur ¿ gCat ¿ 1 ¿ h¿ 1) attained with this W-Nb-O catalyst was higher than that calculated for most relevant and recently reported solid acid catalysts working in both mono- and bi-phasic systems, respectively. Catalytic activity of W-Nb-O material remained practically unchanged after three consecutive reuses, while structure and chemical composition of material were maintained unaltered either after three catalytic cycles or after 14 days experiment carried out under optimal reaction conditions. Reactivity results have been explained on the combination of both Brønsted and Lewis acid sites as a result of the different incorporation of niobium into the bronze structure., Authors thank financial support by the Spanish Government (PID2021-125897OB-I00, PID2021-126235OB-C31, and PID2023- 151036OA-I00) funded by MCIN/AEI/10.13039/501100011033 and FEDER funds. Financial support by European Commission, H2020 Pro-gram (HIGFLY Project, grant agreement N degrees 101006618) is gratefully acknowledged. J.L.-S. acknowledges grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF +) . Authors also thank Miriam Parreño-Romero and the Electron Microscopy Service of Universitat Politècnica de València for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of Cs-W-V-O hexagonal tungsten bronzes for the partial oxidation of ethanol to acetaldehyde

  • Gagliardi, Anna
  • De Arriba-Mateos, Agustín
  • Delgado-Muñoz, Daniel
  • Vallejo, Maria Jose
  • López-Sánchez, Jesús
  • Tabanelli, Tommaso
  • Rubio-Zazo, Juan
  • Cavani, Fabrizio
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] While bioethanol has been acknowledged as a relevant bioderived feedstock, acetaldehyde is an important commodity used to produce a variety of industrial chemicals, and its manufacture currently relies almost exclusively on fossil ethylene. This paper shows the effect of Cs-content in W-V-O hexagonal tungsten bronze catalysts on changes in both the physicochemical characteristics of catalysts and their catalytic performance in the aerobic transformation of ethanol to acetaldehyde, providing a promising pathway to broaden the domain of biorefinery products. The catalytic results were explained on the basis of the elimination of acid sites (responsible to the formation of ethylene and diethyl ether) by the incorporation of Cs+, as interstitial cations, in V-containing hexagonal tungsten bronzes. The catalysts were characterized by XRD, IR, XPS and FESEM, among others, and the incorporation of Cs+ into the bronze backbone, successfully demonstrated by HAXPES and confocal Raman techniques, led to 33% EtOH conversion and 97% acetaldehyde selectivity in the best catalyst¿s formulation,, The funding received for this study from the Spanish Ministry of Science and Innovation, PID2021-126235OB-C31, PID2021-122980OBC5 and PID2023-151036OA-I00 funded by MCIN/AEI/10.13039/501100011033 and FEDER funds, and projects TED2021-130756B-C32 and RYC2022-035912-I funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe by the European Union NextGenerationEU/PRTR, is acknowledged. Authors would also like to thank the European Synchrotron Radiation Facility (beamtime project A25-02-1068), MICIN and Consejo Superior de Investigaciones Científicas for the use of the synchrotron radiation facilities through project PIE 2010 6 0E 013 and to the BM25-SpLine staff for their valuable help.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Beyond conventional characterization: Defect engineering role for sensitivity and selectivity of room-temperature UV-assisted graphene-based NO₂ sensors

  • Peña, Álvaro
  • López-Sánchez, Jesús
  • Sacco, Leandro
  • Vollebregt, Sten
  • Marqués-Marchán, Jorge
  • Horrillo, Carmen
  • Marín, Pilar
  • Matatagui, Daniel
10 páginas, 6 figuras, 1 tabla, The term graphene-based gas sensors may be too broad, as there are many physicochemical differences within the graphene-based materials (GBM) used for chemiresistive gas sensors. These differences condition the sensitivity, selectivity, recovery, and ultimately the sensing performance of these devices towards air pollutants. Continuous ultraviolet irradiation aids in the desorption of gas molecules and enhances sensor performance. Under these conditions, the devices from this work can reliably monitor NO2 and CO at room temperature, below the human-recommended exposure limits, presenting NO2 LoD down to ~20 ppb. By selecting GBMs with different levels of defectivity, which influence gas adsorption dynamics, and through comprehensive charac- terization, including D, D′, D″, 2D, and G Raman bands, graphene-based gas sensors can be tailored to meet specific sensing requirements. This study examines five different non-oxidized GBM to develop tools and gain a deeper understanding of the relationships between GBM properties and their sensing performance. This research introduces a new standard for defect assessment, moving beyond graphene’s D and G Raman band intensity ratio, to facilitate the successful integration of graphene-based gas sensors into everyday applications, such as envi- ronmental monitoring and industrial safety, and potentially impacting other 2D materials, thereby reducing health risks associated with air pollution., Author A. P. received funding from grant PRE2019-0875001234, Ministerio de Ciencia e Innovaci´on (MCIN), Spain. Authors A. P., D. M., P. M., and M-C. H. received funding from project PDC2022-133039- I00 and PID2021-123112OB-C21 from MCIN/AEI/10.13039/ 501100011033, Spain and European Union Next Generation EU/PRTR. D. M. acknowledges financial support from grant RYC2021-031166-I funded by MCIU/AEI/10.13039/501100011033. J. L.-S. acknowledges the financial support from PID2023-151036OA-I00 funded by MCIU/ AEI/10.13039/501100011033 and by the European Union, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/ 501100011033 and by the European Social Fund Plus (ESF+). JM thanks the Regional Government of Madrid for the project P2018/NMT- 4321 NANOMAGCOST. M-C. H acknowledges the support from the COST Action CA21101, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revealing the impact of ball milling as an intermediate stage in solid-state reaction synthesis of SmFeO3 particles

  • Gouadria, H.
  • López-Sánchez, Jesús
  • Navarro, E.
  • Cobos, M.Á.
  • Castellano-Soria, A.
  • Mnasri, T.
  • Marín, P.
In this work, the impact of milling time on the structural, morphological, and magnetic properties is investigated in SmFeO3 (SFO) powders obtained by solid state reaction. Specifically, the ball milling process is incorporated as an intermediate step during the synthesis and their magnetic properties vary when the samples are milled for 4 and 10 h. Based on X-ray diffraction, the resulting samples crystallized in Pbnm space group, with a slight decrease in crystallite size and cell volume with milling time. These results are also supported by confocal Raman microscopy with a slight shift towards lower wavenumbers. In this sense, magnetic characterization demonstrates a weak ferromagnetic contribution coexisting with the dominant antiferromagnetic order. Butterfly shaped hysteresis loops are observed in both samples for T > 200 K while a single shaped loop is achieved for T < 200 K. Zero field cooled, and field cooled magnetization curves shows a broad maximum centered at 140 K and bifurcation of the two curves because of the competing interaction between the Sm+3 and Fe3+ ions into the SFO crystal structure. Interestingly, exchange bias (EB) effect is found up to 200 K with a field cool of 20 kOe for both samples. The existence of Fe–Fe, Fe–Sm, and Sm–Sm interactions in a cluster glass state induced by ball milling processes might be the main cause of such EB effect. © 2024 Elsevier B.V., P. M. received funding from project PDC2022-133039-I00 from MCIN/AEI/10.13039/501100011033, Spain and European Union Next Generation EU/PRTR. J. L.-S. acknowledges the financial support from PID2023-151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by the European Union, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF +) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A novel framework for evaluating the surface free energy and depinning forces of invasive medical tubes

  • Do Nascimento, Rodney M.
  • Rodrigues, Joao Elias F.S.
  • Vasconcellos, S.Michaelis de
  • Freire, N.
  • Monteiro, D.A.
  • Baltazar, C.
  • Flores, J.P.
  • Rosso Dotto, M.E.
  • Bechtold, I.H.
  • López-Sánchez, Jesús
  • Martínez Orellana, Lidia
  • Huttel, Yves
Medical tubes used in life-saving procedures, such as catheterization, and angioplasty are vital tools in modern healthcare, but they often fall short in one critical area: hydrophilicity. Poor surface lubricity leads to increased friction, causing patient discomfort and complications, and raising significant concerns for both clinicians and patients. The physical and chemical properties of these surfaces are key to enhancing hydrophilicity, yet current commercial coatings, long considered the gold standard, are now under regulatory scrutiny due to potential toxicities. In the present study, we introduce a breakthrough method to evaluating and improving medical tube coatings. Through a novel combination of contact angle measurements and advanced microscopy-spectroscopy techniques, we provide the first comprehensive analysis of the physicochemical parameters that govern surface performance and fundamental principles with a view to specific applications. Our findings not only expose the chemical limitations of the current coatings but also identify critical factors that enhance surface-free energy, drastically boosting hydrophilicity. For the first time, we quantify depinning forces − interfacial interactions between tube surfaces and liquids during medical procedures − linking this physical quantity to coating performance. This innovative framework delivers actionable insights for the design of next-generation, highly hydrophilic coatings that promise to transform the safety and comfort of invasive medical devices. Our work sets a new standard for the future of medical device surface engineering. © 2025 Elsevier B.V., All rights reserved., The authors are grateful to grant provide by Braile Life-Saving Technologies, Brazil and PID2021-126524NB-100 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making EuropePID2021-122980OB-C5 and PID2023-151036OA-I00 funded by MICIU/”. J. L.-S. acknowledges the financial support from AEI/ 10.13039/501100011033 and by the European Union (EU), and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF + )., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comprehensive characterization and structural modelling of lithium ferrites

  • Granados-Miralles, Cecilia
  • Marco, J.F.
  • Serrano Rubio, Aída
  • Gorni, Giulio
  • López-Sánchez, Jesús
  • Castellano-Soria, Alberto
  • Navarro, Elena
  • Marín, Pilar
  • Rubio-Zuazo, J.
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
13 pages, 8 figures, 2 tables, The character and magnitude of the properties of lithium ferrites depend on the specific polymorph stabilized. Reliable polymorph identification and quantitative analysis have been realized by complementary structural characterization techniques (synchrotron X-ray diffraction, 57Fe M¨ossbauer and X-ray absorption spectroscopies), through fitting/modelling of the experimental datasets to appropriate mathematical models. Calculated sample compositions show a maximum offset of 7 wt% between techniques, and cation distribution on the spinel-like LiFe5O8 material has yielded values ranging from 60 to 67 at% Fe3+ in octahedral sites with respect to the total number of Fe3+cations in the spinel phase. Magnetic transition temperatures (i.e., N´eel/Curie) in the order of 91–93 K and 893–898 K have been measured for LiFeO2 and LiFe5O8, respectively. The combined characterization presented here is brought forward as a reliable method to establish the relative concentrations of polymorphs in ferrites, a strategy which can be expanded to other families of Fe-based materials., This work has been supported by grants PID2021–124585NB-C31, PID2021–124585NB-C33, and PID2023–151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, grants TED2021–130957B-C51, CNS2022–135876, RYC2021–031181-I, and RYC2021–031236-I funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, and grants RYC- 2017–23320, and RYC2022–035912-I funded by MICIU/AEI/10.13039/ 501100011033 and by “ESF Investing in your future”. XAS experiments were performed at the BL22-CLÆSS beamline at ALBA Synchrotron with the collaboration of ALBA staff (experiment n. 2022025654). The MICIU, and CSIC are acknowledged for provision of synchrotron radiation facilities at BM25-SpLine and for financial support through the projects PE-2010 6 0E 013 and PE-2021 60 E 030. The authors sincerely acknowledge the ESRF (France), the MCINN, and the Consejo Superior de Investigaciones Científicas (CSIC, Spain) for their financial and technical support under proposal number A25–02–1009, as well as the BM25-SpLine staff for their assistance in the use of the synchrotron radiation facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Digital light processing of SiO2-TiO2 materials by combining ceramic slurries and metal precursors

  • Borlaf, Mario
  • Candelario, Víctor M.
  • López-Sánchez, Jesús
  • Li, Yiting
  • Valero-Saiz, María
  • Cepa-López, Víctor
  • Mas-Ballesté, Rubén
  • Moreno, Rodrigo
One-step additive manufacturing of functional ceramics via Digital Light Processing (DLP) is still under development. The increased demand of such kind of materials creates new opportunities to investigate alternatives and new methodologies. In this work, a combination of photocurable SiO2 slurries with Ti metal precursor (titanium isopropoxide, TIPO) is used to fabricate SiO2-TiO2 materials by DLP. Slurries with different solids content and metal precursor concentration were prepared. The obtained materials were characterized and evaluated as photocatalysts. The anatase-TiO2 phase was retained at temperatures as high as 1200 ºC in all cases, although for higher concentrations the rutile phase was also detected at such temperature. From the methylene blue degradation experiments it can be extracted that the SiO2 surface was fully covered when a 10 wt% of metal precursor was added, and the highest photocatalytic activity was obtained for the samples with 10–20 wt% of TIPO sintered at 1000–1100 ºC/1 h., This work was supported by projects PID2021-124521OB-100 funded by MCIN/AEI/10.13039/501100011033/ & “ERDF A way of making Europe”, PID2022-141016OB-I00 funded by MCIN/AEI/FEDER10.13039/501100011033, and PID2023-151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU. JLS and MB also acknowledge the financial support from the Ramón y Cajal grants RYC2022-035912-I and RYC2023-044679-I funded by Ministry of Science, Innovation and Universities MICIU/AEI/10.13039/501100011033 and European Social Funds (FSE+)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient recycling of End-of-Life ceramic ferrite hard magnets into new permanent ceramic magnets

  • Berja, Alba
  • Granados-Miralles, Cecilia
  • Casaleiz, Daniel
  • Guzmán-Mínguez, J. C.
  • Frangez, Tina
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
Within current sustainable and circular economy approaches, recycling hexaferrite magnets has emerged as a strategic alternative to rare-earth-based magnets. This study proposes an efficient recycling and fabrication protocol for sintered ferrite magnets by merging annealing and sintering into a single step, reducing energy consumption and emissions. Rietveld analysis revealed temperature-dependent variations in ferrite and hematite fractions, with reduced hematite content at a sintering temperature of 1250°C. Magnetic characterization indicated decreasing coercive field, H <inf> c </inf>, and remanent magnetization, M <inf> r </inf>, with increasing sintering temperature, while a density of 93 % was achieved at 1250°C for 30 min. X-ray diffraction, FE-SEM, and particle size analysis confirmed that the reduced magnetic properties of recycled magnets, compared to commercial counterparts, are due to hematite formation and sintering-induced grain growth. These findings highlight the importance of thermal optimization to balance densification and magnetic performance. This work demonstrates the first successful fabrication of fully recycled strontium ferrite magnets from End-of-Life materials. © 2025 The Authors., This work has been supported through the INSPIRES project funded by the EIT RawMaterials under grant number 20090, the BEETHOVEN project funded by the European Commission under grant agreement 101129912, and the GENIUS project funded by the Ministerio de Ciencia, Innovación y Universidades / Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through Grant PCI2024–153493. Also, this work has been supported by grants TED2021–130957B-C51, CNS2022–135876, and RYC2021–031181-I funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, grants PID2023–151036OA-I00 and PID2021–124585NB-C33 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, and by the JECS Trust, through Fund Contract no. 2022319., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solvent-assisted spark plasma sintering of SrFe12O19 permanent magnets

  • Pino-Batlles, Carmen del
  • Rojas-Hernández, Rocío E.
  • Granados-Miralles, Cecilia
  • Berja, Alba
  • Casaleiz, DAniel
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
  • Serrano Rubio, Aída
The increased demand expected for permanent magnets in the next few years and the need for a more sustainable production in the ceramic industry bring forward the need to develop new and greener processes. Herein, spark plasma sintering is employed to consolidate strontium hexaferrite magnets at lower sintering temperatures by adding a transient solvent, such as glacial acetic acid, to the starting powder. The addition of a solvent activates the onset of mass transport at reduced temperatures, leading to dense pieces with relative densities above 95% at 850 °C, lower than those reported in previous studies. An optimized solvent-assisted spark plasma sintering strategy is established, allowing us to identify the parameter ranges that lead to a trade-off between relative density and coercivity. The results presented unveil that integrating solvent-assisted approaches with advanced sintering techniques can be a powerful pathway for the development of new strategies for production of ceramic permanent magnets., This work was supported by the Spanish Ministry for Science, Innovation and Universities (MICIU) under the projects PID2021- 124585NB-C33 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, EU and PID2023–151036OA-I00, TED2021-130957B-C51, CNS2022–135876 and CNS2024-154490 funded by MICIU/AEI/ 10.13039/501100011033 and by the ‘‘European Union NextGenerationEU/PRTR’’. This work has also been supported by BEETHOVEN project funded by the European Comission under grant agreement 101129912. R.E. R.-H. acknowledges the financial support from the Estonian Research Council (grants PSG-466) and project PID2023-153398OB-I00 funded by MCIU/AEI/10.13039/ 501100011033 and the European Social Fund Plus (ESF+). A.S. and C. G.-M. acknowledge financial support from grant RYC2021–031236-I and RYC2021–031181-I, respectively, funded by MICIU/AEI/10.13039/ 501100011033 and by the “European Union NextGenerationEU/PRTR”., Supplementary data to this article can be found online at https://doi. org/10.1016/j.jmrt.2026.04.255., Peer reviewed, Sin experimentacion animal ni uso de NAMs
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local control of perpendicular magnetic anisotropy of Pd/Co multilayers via ion bombardment

  • Sebastiani-Tofano, Eugenia
  • Parente, Ana
  • Alcázar Ruano, Pedro L.
  • Abuín, Manuel
  • González-García, Álvaro
  • López-Sánchez, Jesús
  • Rubio-Zuazo, J.
  • Manso Silvan, M.
  • Mascaraque, Arantzazu
  • González Barrio, Miguel Ángel
  • Menghini, Mariela
  • Schuller, Ivan K.
  • Basaran, Ali C.
  • González, Elvira M.
  • Rodríguez de la Fuente, Óscar
  • Muñoz-Noval, A.
In this work, we have controlled locally the magnetic anisotropy of PdCo multilayers using ion beam modification. First, we have used techniques with different probing depths to confirm that cobalt is partially oxidized in the Pd/Co multilayers exhibiting PMA fabricated by sputtering, presumably due to the diffusion of atmospheric oxygen migrated through the Pd capping layer. Then, low energy ion bombardment has been employed to induce a structural disorder in the upper layers of the multilayer, gradually reducing the PMA at local scale with increasing ion doses. Medium ion doses lead to a marked decline in PMA, resulting in equivalent magnetic anisotropy directions and the loss of characteristic labyrinthine magnetic domain morphology. High ion doses completely suppress PMA, yielding a typical in-plane shape anisotropy. By combining controlled PMA reduction via lithographic techniques, we create elongated structures displaying distinct magnetic responses; bombarded regions exhibit reduced PMA, whereas adjacent regions maintain their PMA. Notably, regions with reduced PMA do not disrupt the distribution of perpendicular magnetic domains in neighboring PMA regions, even at widths as narrow as 500 nm, demonstrating the robustness of the PMA domain structure., The authors acknowledge financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación, Spain, through projects PID2021–122980OB-C51, PID2021-122980OB-C52, PID2021-126323OA-I00 and CNS2023-144128; from Ministerio de Universidades (Salvador de Madariaga program) through research stay PRX21/00740. Authors also acknowledge funds from European Commission through MAGNAMED 734801 project (H2020-MSCA-RISE-2016), as well as from 2018-T1/IND-10360 Talento Program and project TEC-2024/TEC-380 “Mag4TIC” from Comunidad de Madrid. The authors are also grateful to the SpLine staff for their valuable help during experiment No. 25-02-1002 and for the financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades and Consejo Superior de Investigaciones Científicas under Grant Nos. 2010 6O E 013, 2021 60 E 030 and CEX2024-001445-S. J. Romero from the C.A.I de Técnicas Físicas-UCM is acknowledged for the SQUID measurements. J.L.-S. acknowledges the financial support from grant PID2023-151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF + ). M.M.S. acknowledges projects PID2020-112770RB-C22 and PID2023-151371OB-C22, funded by MCIN/AEI/10.13039/501100011033 and FEDER, EU. A.G-G. thanks Universidad Complutense de Madrid and Banco Santander (CT82/20-CT83/20) for financial support. M.M. acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2020-001039-S). Work at UCSD was supported by the U.S. Department of Energy’s Office of Basic Energy Science under Grant DE-FG02-87ER45332., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001445-S; CEX2020-001039-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-Operando local structural response of Si-based press-fit PN-junction diodes

  • Román, Sara
  • Moure Arroyo, Alberto
  • López-Sánchez, Jesús
  • Rubio-Zuazo, J.
  • Campo, Ángel Adolfo del
  • Oujja, Mohamed
  • Calvo, Rodrigo
  • Sánchez-Prieto, Jesús
  • Lorite, Israel
  • Fernández Lozano, José Francisco
  • Serrano Rubio, Aída
[Data Statement] Data will be made available on request., Understanding the local structural evolution of silicon-based press-fit diodes under real operating conditions is critical for the development of reliable power electronic components. During operation, these diodes are exposed to high electric currents, leading to significant overheating and the generation of interfacial stresses caused by mismatches in the thermal expansion coefficients of the constituent materials in the device. These effects are further influenced by the doping profiles of the semiconductor junctions. In this study, we examine the structural response of single-crystal silicon in commercial press-fit power diodes both under room conditions (room temperature and no applied current) as well as under real current-driven operating conditions, focusing on localized regions defined by the doping profiles of three different PN-junction-based devices. The presence of dopants, along with the current-induced strain and thermal effects in the silicon lattice, leads to structural changes that directly impact device performance. By employing advanced in-operando characterization techniques, we resolve, for the first time, localized interfacial and region-dependent structural phenomena within operating press-fit diodes and establish direct correlations between lattice distortions, interfacial behavior, and doping concentration. These results provide new insights into the microscopic mechanisms governing reliability and degradation in high-power silicon devices under realistic working conditions., This work was supported by the Consejo Superior de Investigaciones Científicas (CSIC) under project AFICHES (No. 202460E101). S.R.-S. acknowledges the financial support from the FARDIO project to SEG Automotive Germany GmbH. J.L.-S. acknowledges the financial support from grant PID2023-151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF +). A.S. acknowledges the financial support from Spanish Ministry for Science and Innovation (MCIN) for a Ramón y Cajal contract (No. RYC2021-031236-I) funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR” and the project PID2021-124585NB-C33 funded by MCIN/AEI/10.13039/501100011033 and by ‘‘ERDF A way of making Europe’’. The authors acknowledge the support from the ‘Centro de Microanalisis de Materiales (CMAM)—Universidad Autonoma de Madrid’, for the beam time proposals with codes IMP019/22 and IMP013/23; and its technical staff for their contribution to the operation of the accelerator. We thank Gastón García and José Olivares for helpful discussions and reading of the manuscript. The authors also acknowledge the European Synchrotron Radiation Facility (ESRF), the MCIN and the CSIC for provision of synchrotron radiation facilities under proposal numbers A25-02-940, A25-02-997, A25-02-1030, MA-5391 and A25-02-1074, as well as for the funding through the projects PIE-2010-6-0E-013 and PIE-2021-60-E-030. We would like to thank technical staff for their assistance and support in using beamline BM25-SpLine., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Studies on SrFe12O19/CoFe2O4 composites in powders

  • Bilovol, V.
  • Quesada, Adrián
  • Granados-Miralles, Cecilia
  • Gajewska, M.
  • Berent, K.
In this work, we challenge the widely accepted assumption that nanoscale CoFe₂O₄ (CFO) is required to enhance the magnetic performance of SrFe₁₂O₁₉ (SrM)–CFO hard–soft composites through exchange coupling. We demonstrate that CFO particles with sizes up to 400 nm—well above the typical exchange-coupling length scale—can still increase the maximum energy product ((BH)<inf>max</inf>) of SrM by up to 29%. A systematic study of SrM/CFO composites with CFO particle sizes ranging from 30 to 430 nm and annealed between 500 and 900 °C reveals that the largest enhancement in remanent magnetization and (BH)<inf>max</inf> occurs after low-temperature annealing (500 °C), independent of CFO size. Structural analyses confirm phase stability and controlled microstructural evolution across the series. Notably, the persistence of remanence enhancement even for CFO particle sizes well above the typical exchange-coupling length scale suggests that coherent hard–soft exchange coupling is not the dominant mechanism. Instead, the magnetic behavior is governed by improved SrM alignment and favorable interparticle dipolar interactions, with possible additional contributions from processing-induced alignment effects. At higher annealing temperatures, microstructural coarsening and interface evolution lead to a reduction in both remanence and coercivity. These results demonstrate that the conventional nanoscale criterion for the soft phase is not a prerequisite for performance enhancement in hard–soft ferrite composites, highlighting the key role of magnetostatic interactions and providing new design guidelines for rare-earth-free permanent magnets., The research project has been partly supported by program “Excel lence initiative – research university” for the AGH University. This work has been supported by grant PID2023-151036OA-I00 funded by MICIU/ AEI/10.13039/501100011033 and by ERDF, EU. C.G.-M. acknowledges financial support from grant RYC2021-031181-I funded by MCIN/ AEI/10.13039/501100011033and by the “European Union NextGe nerationEU/PRTR”. This work was supported by the BEETHOVEN project, funded by the European Commission under Grant Agreement No. 101129912. The views and opinions expressed are those of the author(s) only and do not necessarily reflect those of the European Union or the European Education and Culture Executive Agency (EACEA). Neither the European Union nor EACEA can be held sible for them., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photocontrol of nitrogen sites for poisoning-free NO₂ sensing

  • Pérez-Román, Berta
  • Matatagui, D.
  • Mazo Fernández, María Alejandra
  • Marín, Pilar
  • Pascual, Laura
  • López-Sánchez, Jesús
  • Rubio Marcos, Fernando
In this communication, we present a comprehensive investigation of the UV photoactivation mechanism in nitrogen-doped carbon-based sensing materials. Here, tailored nitrogen incorporation enables rapid and effective NO₂ detection, driven by the synergistic interplay between the chemical nature and electronic properties of fundamentally graphitic-, pyridinic- and pyrrolic-N species. The influence of 275 nm UV power density is probed via in-situ confocal Raman microscopy measurements. The results reveal its critical role in the desorption process and its correlation with microstructural features and nitrogen species functionalization. Interestingly, the combination of hierarchical porous structure with high SBET (2783 m2/g), a large number of structural defects, and nitrogen doping through different species, promotes p- and n-type behaviors. This scenario leads to superior sensing performance. At 7 mW/cm2, the device shows poisoning-free operation, 11.76%/ppm sensitivity, and a detection limit of 2.55 ppb. Therefore, the work advances a technologically demanding solution to achieve practical monitoring of NO₂ at room temperature in the sub-ppm range, with high sensitivity, rapid recovery, and stability against poisoning. © 2026 The Authors, The authors acknowledge funding support from projects PID2024-156318OB-I00, PID2024-156318OB-I00, PID2023-151036OA-I00, PDC2022-133039-I00, PID2021-123112OB-C21, TED2021-132800B-I00, and TED2021-129688B-C21 funded by MCIU/AEI/10.130 39/501100011033 and the European Social Fund Plus (ESF+). We also acknowledge PERTE-VEC INVECPRO for the financial support of the EU within the frame of the initiative Next Generation EU (Proyecto Estrat´egico para la Recuperaci´on y Transformaci´on Econ´omica en el sector del Vehículo El´ectrico y Conectado). J. L.-S. acknowledges the financial support from grant RYC2022-035912-I funded by MCIU/AEI/ 10.13039/ 501100011033 and by the European Social Fund Plus (ESF+). D. M extents gratitude to financial support within the RYC2021-031166-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+). F. R-M and B. P-R also express gratitude to Comunidad de Madrid for financial support through the Industrial Doctorates project (IND2020/IND-17375), co-financed by the European Social Fund., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Local control of perpendicular magnetic anisotropy of Pd/Co multilayers via ion bombardment

  • Sebastiani Tofano, Eugenia
  • Parente Campos, Ana
  • Alcázar Ruano, Pedro Luis
  • Abuín, Manuel
  • González García, Álvaro Antonio
  • López Sánchez, Jesús
  • Rubio Zuazo, Juan
  • Manso Silván, Miguel
  • Mascaraque Susunaga, Arantzazu
  • González Barrio, Miguel Ángel
  • Menghini, Mariela
  • Schuller, Ivan K.
  • Basaran, Ali C.
  • González Herrera, Elvira María
  • Rodríguez De La Fuente, Óscar
  • Muñoz Noval, Álvaro
In this work, we have controlled locally the magnetic anisotropy of PdCo multilayers using ion beam modification. First, we have used techniques with different probing depths to confirm that cobalt is partially oxidized in the Pd/Co multilayers exhibiting PMA fabricated by sputtering, presumably due to the diffusion of atmospheric oxygen migrated through the Pd capping layer. Then, low energy ion bombardment has been employed to induce a structural disorder in the upper layers of the multilayer, gradually reducing the PMA at local scale with increasing ion doses. Medium ion doses lead to a marked decline in PMA, resulting in equivalent magnetic anisotropy directions and the loss of characteristic labyrinthine magnetic domain morphology. High ion doses completely suppress PMA, yielding a typical in-plane shape anisotropy. By combining controlled PMA reduction via lithographic techniques, we create elongated structures displaying distinct magnetic responses; bombarded regions exhibit reduced PMA, whereas adjacent regions maintain their PMA. Notably, regions with reduced PMA do not disrupt the distribution of perpendicular magnetic domains in neighboring PMA regions, even at widths as narrow as 500 nm, demonstrating the robustness of the PMA domain structure.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Photocontrol of nitrogen sites for poisoning-free NO₂ sensing

  • Pérez Román, Berta
  • Matatagui Cruz, Daniel
  • Mazo, M. Alejandra
  • Marín Palacios, María Pilar
  • Pascual, Laura
  • López Sánchez, Jesús
  • Rubio Marcos, Fernando
In this communication, we present a comprehensive investigation of the UV photoactivation mechanism in nitrogen-doped carbon-based sensing materials. Here, tailored nitrogen incorporation enables rapid and effective NO₂ detection, driven by the synergistic interplay between the chemical nature and electronic properties of fundamentally graphitic-, pyridinic- and pyrrolic-N species. The influence of 275 nm UV power density is probed via in-situ confocal Raman microscopy measurements. The results reveal its critical role in the desorption process and its correlation with microstructural features and nitrogen species functionalization. Interestingly, the combination of hierarchical porous structure with high SBET (2783 m2/g), a large number of structural defects, and nitrogen doping through different species, promotes p- and n-type behaviors. This scenario leads to superior sensing performance. At 7 mW/cm2, the device shows poisoning-free operation, 11.76%/ppm sensitivity, and a detection limit of 2.55 ppb. Therefore, the work advances a technologically demanding solution to achieve practical monitoring of NO₂ at room temperature in the sub-ppm range, with high sensitivity, rapid recovery, and stability against poisoning.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Molecular architecture strategies for UV-enhanced NO2 sensors under ambient conditions

  • Pérez Roman, Berta
  • López Sánchez, Jesús
  • Mazo, M. Alejandra
  • Peña Moreno, Álvaro
  • Calatayud, David G.
  • Marín Palacios, María Pilar
  • Pascual, Laura
  • Rojas Hernández, Rocío E.
  • Matatagui Cruz, Daniel
  • Rubio Marcos, Fernando
Detecting nitrogen dioxide (NO₂) below sub-ppm levels is critical for mitigating health risks associated with air pollution. Carbon-based materials are promising candidates for gas sensing, but their performance depends strongly on structural and chemical tuning. Here we show that nitrogen-doped carbide-derived carbons syn­thesized using dendritic molecular architectures exhibit enhanced gas-sensing properties. The resulting 2D porous structure demonstrates p-type response to NO₂, with a sensitivity of 7.9 ± 2.8 %/ppm in dark conditions. Under ultraviolet illumination, the response increases by 150 % without inducing poisoning effects. This improvement is attributed to the combined effects of nitrogen doping, high defect concentration, and hierar­chical micro-mesoporosity. Our results demonstrate that molecular design is a powerful strategy to engineer carbon materials with tunable gas-sensing properties, offering new opportunities for next-generation detection technologies.