Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comprehensive characterization and structural modelling of lithium ferrites

  • Granados-Miralles, Cecilia
  • Marco, J.F.
  • Serrano Rubio, Aída
  • Gorni, Giulio
  • López-Sánchez, Jesús
  • Castellano-Soria, Alberto
  • Navarro, Elena
  • Marín, Pilar
  • Rubio-Zuazo, J.
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
13 pages, 8 figures, 2 tables, The character and magnitude of the properties of lithium ferrites depend on the specific polymorph stabilized. Reliable polymorph identification and quantitative analysis have been realized by complementary structural characterization techniques (synchrotron X-ray diffraction, 57Fe M¨ossbauer and X-ray absorption spectroscopies), through fitting/modelling of the experimental datasets to appropriate mathematical models. Calculated sample compositions show a maximum offset of 7 wt% between techniques, and cation distribution on the spinel-like LiFe5O8 material has yielded values ranging from 60 to 67 at% Fe3+ in octahedral sites with respect to the total number of Fe3+cations in the spinel phase. Magnetic transition temperatures (i.e., N´eel/Curie) in the order of 91–93 K and 893–898 K have been measured for LiFeO2 and LiFe5O8, respectively. The combined characterization presented here is brought forward as a reliable method to establish the relative concentrations of polymorphs in ferrites, a strategy which can be expanded to other families of Fe-based materials., This work has been supported by grants PID2021–124585NB-C31, PID2021–124585NB-C33, and PID2023–151036OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, grants TED2021–130957B-C51, CNS2022–135876, RYC2021–031181-I, and RYC2021–031236-I funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, and grants RYC- 2017–23320, and RYC2022–035912-I funded by MICIU/AEI/10.13039/ 501100011033 and by “ESF Investing in your future”. XAS experiments were performed at the BL22-CLÆSS beamline at ALBA Synchrotron with the collaboration of ALBA staff (experiment n. 2022025654). The MICIU, and CSIC are acknowledged for provision of synchrotron radiation facilities at BM25-SpLine and for financial support through the projects PE-2010 6 0E 013 and PE-2021 60 E 030. The authors sincerely acknowledge the ESRF (France), the MCINN, and the Consejo Superior de Investigaciones Científicas (CSIC, Spain) for their financial and technical support under proposal number A25–02–1009, as well as the BM25-SpLine staff for their assistance in the use of the synchrotron radiation facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual luminescent and magnetic properties in Ti1-xNdxO2-x solid solutions with nanoscaled rutile

  • Colomer, María T.
  • Quesada, Adrián
  • López-Sánchez, Jesús
  • Martínez, Jesús I.
  • Mather, Glenn C.
  • Molina, Pablo
In this work, we have synthesised Ti1-xNdxO2-0.5x solid solutions (0.05 ≤ x ≤ 0.10) by a colloidal sol−gel route followed by calcination at 400, 700 or 900 °C in air for 10 min. Pure rutile solid solutions were obtained when calcined at 900 °C for compositions up to 1 mol% Nd3+. On doping with 2, 3, 5, and 10 mol% Nd3+, the solid solutions are comprised of rutile and Nd4Ti9O24 as second phase according to XRD. In addition, by HREM TiO1.9 Magneli series is also observed as a trace. Photoluminescence (PL) decay curves show a multi−exponential decay behaviour likely attributable to the structural properties of the host matrix and the formation of at least two different microenvironments. Moreover, to the best of our knowledge, it is shown for the first time that, in addition to PL emission, rutile solid solutions with x = 0.03 present ferromagnetic behaviour with a robust magnetic hysteresis. According to the magnetisation measurements, the isolated Nd3+ centres, detected by EPR, are magnetically non−interacting; in addition, Nd4Ti9O24 presents a paramagnetic behaviour. Furthermore, the height of the EPR feature increases for Nd3+ content below 3 mol%, reaches a maximum for this value, and decreases for higher values of Nd3+. In this framework, a plausible explanation is that a non−stoichiometric Nd−Ti−O based phase, undetectable via XRD or Raman but detectable by PL and magnetisation measurements, hosts the magnetic order. These results pave the way for the development of novel optomagnetic multifunctional nanomaterials., This work was supported by the Science and Innovation Ministry (Government of Spain) and FEDER Funds under the Grants n° PID2019−104118RB−C21, and PID2022−140923NB−C21, and also through next generation funds, grants TED2021−130809B−I00 and TED2021–130957B−C51, and CNS2022–135876 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR, and grant PID2021−124585NB−C33 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient recycling of End-of-Life ceramic ferrite hard magnets into new permanent ceramic magnets

  • Berja, Alba
  • Granados-Miralles, Cecilia
  • Casaleiz, Daniel
  • Guzmán-Mínguez, J. C.
  • Frangez, Tina
  • Fernández Lozano, José Francisco
  • Quesada, Adrián
Within current sustainable and circular economy approaches, recycling hexaferrite magnets has emerged as a strategic alternative to rare-earth-based magnets. This study proposes an efficient recycling and fabrication protocol for sintered ferrite magnets by merging annealing and sintering into a single step, reducing energy consumption and emissions. Rietveld analysis revealed temperature-dependent variations in ferrite and hematite fractions, with reduced hematite content at a sintering temperature of 1250°C. Magnetic characterization indicated decreasing coercive field, H <inf> c </inf>, and remanent magnetization, M <inf> r </inf>, with increasing sintering temperature, while a density of 93 % was achieved at 1250°C for 30 min. X-ray diffraction, FE-SEM, and particle size analysis confirmed that the reduced magnetic properties of recycled magnets, compared to commercial counterparts, are due to hematite formation and sintering-induced grain growth. These findings highlight the importance of thermal optimization to balance densification and magnetic performance. This work demonstrates the first successful fabrication of fully recycled strontium ferrite magnets from End-of-Life materials. © 2025 The Authors., This work has been supported through the INSPIRES project funded by the EIT RawMaterials under grant number 20090, the BEETHOVEN project funded by the European Commission under grant agreement 101129912, and the GENIUS project funded by the Ministerio de Ciencia, Innovación y Universidades / Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033) through Grant PCI2024–153493. Also, this work has been supported by grants TED2021–130957B-C51, CNS2022–135876, and RYC2021–031181-I funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, grants PID2023–151036OA-I00 and PID2021–124585NB-C33 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU, and by the JECS Trust, through Fund Contract no. 2022319., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dual luminescent and magnetic properties in Ti1-xNdxO2-δ solid solutions with nanoscaled rutile

  • Colomer, María T.
  • Quesada, A.
  • López-Sánchez, J.
  • Martínez Martínez, Jesús Ignacio
  • Mather, G.C.
  • Molina, P.
In this work, we have synthesised Ti1-xNdxO2-0.5x solid solutions (0.05 ≤ x ≤ 0.10) by a colloidal sol−gel route followed by calcination at 400, 700 or 900 °C in air for 10 min. Pure rutile solid solutions were obtained when calcined at 900 °C for compositions up to 1 mol% Nd3+. On doping with 2, 3, 5, and 10 mol% Nd3+, the solid solutions are comprised of rutile and Nd4Ti9O24 as second phase according to XRD. In addition, by HREM TiO1.9 Magneli series is also observed as a trace. Photoluminescence (PL) decay curves show a multi−exponential decay behaviour likely attributable to the structural properties of the host matrix and the formation of at least two different microenvironments. Moreover, to the best of our knowledge, it is shown for the first time that, in addition to PL emission, rutile solid solutions with x = 0.03 present ferromagnetic behaviour with a robust magnetic hysteresis. According to the magnetisation measurements, the isolated Nd3+ centres, detected by EPR, are magnetically non−interacting; in addition, Nd4Ti9O24 presents a paramagnetic behaviour. Furthermore, the height of the EPR feature increases for Nd3+ content below 3 mol%, reaches a maximum for this value, and decreases for higher values of Nd3+. In this framework, a plausible explanation is that a non−stoichiometric Nd−Ti−O based phase, undetectable via XRD or Raman but detectable by PL and magnetisation measurements, hosts the magnetic order. These results pave the way for the development of novel optomagnetic multifunctional nanomaterials.