Pasar al contenido principal

ARQUITECTURAS JERARQUICAS BASADAS EN OXIDOS PARA SU USO EN PLATAFORMAS MULTIMODALES

PID2019-104118RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of sintering under CO+N2/H2 and CO2+air atmospheres on the physicochemical features of a commercial nano-YSZ

  • Colomer, María T.
  • Simenas, M.
  • Banys, Juras
  • Vattier, Florencia
  • Gagor, A.
  • Maczka, M.
Given the need to process anodes and composites based on nano-YSZ in reducing or in air containing additional CO2 atmospheres for the fabrication of solid oxide fuel cells (SOFCs), and solid oxide electrolysis cells (SOECs), we have studied the effect of the exposure to CO+N2/H2 or CO2+air mixtures during sintering of YSZ green pellets, prepared from commercial nanopowders, on their structure, microstructure, chemical composition and their electrical properties. The reduced sample shows Raman bands at 1298 and 1605 cm−1 that are assigned to the D and G bands of carbon, respectively. The bands intensity ratio ID/IG indicates a larger content of disordered carbon. X-ray photoelectron spectroscopy (XPS) shows that C is present in the reduced samples as reduced carbon. However, the samples sintered in CO2+air present C as carbonate-type. Impedance spectroscopy reveals that the highest total conductivity is for the reduced samples in the whole range of studied temperatures. In addition, sintering in CO2+air causes a detrimental effect on the grain boundary conductivity and therefore, on the total electrical conductivity of YSZ. It can be due to the presence of impurities such as carbonates and oxidised or even, polymerised carbonaceous species located at those areas., This work was partially supported by the Science and Innovation Ministry (Government of Spain) and cofinanced with FEDER Funds under the Grant PID2019-104118RB-C21.We also acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Monitoring the Simultaneous Implantation of Ti and Tb Cations to a Sacrificial Template and the Sol-Gel Synthesis of Tb-Doped TiO2 (Anatase) Hollow Spheres and Their Transition to Rutile Phase

  • Colomer, María T.
  • Vattier, Florencia
[EN] Tb-doped TiO (anatase) micro-hollow spheres (HSs) with nano-shells, in the range 0.00–3.00 at.% Tb, were successfully synthesized by a simultaneous chemical implantation route of both Ti and Tb cations from chlorides to a poly-styrene (PST)-co-poly-divinyl benzene (PDVB) sacrificial template, followed by controlled hydrolysis and polycondensation reactions. After water addition to the mixture of the precursors with the template, a decrease in the intensity and a shift to lower wavenumbers of the C=O absorption band in the IR spectra can indicate not only the anchoring of Ti and Tb ions to the carbonyl group of the template but also the hydrolysis of the implanted precursors. This latter process can involve a proton attack on the Ti–Cl, Tb–Cl and C=O bonds, the occupation of a vacant site by a water molecule, and then the dissociation of the dangling Ti–Cl, Tb–Cl ligands and C=O bonds. It gives rise to TiTb[(OH)Cl]@PST–PDVB and TiTb[(OH)]@PST–PDVB complexes (x = 0.00, 0.0012, 0.0170 and 0.030). Finally, polycondensation of these species leads to TiTbO@PST–PDVB compounds. After subsequent thermal removal at 550 °C of the template, the IR bands of the core (template) totally vanished and new bands were observed in the 400–900 cm region which can be attributed to the metalloxane bondings (M–O, M’–O, M–O–M, M–O–M’ and/or M’–O–M’, being M and M’ = Ti and Tb, respectively, i.e., mainly vibration modes of anatase). Then, micron-sized HSs of TiO and Tb-doped-TiO (anatase) were obtained with nano-shells according to field emission gun scanning electron microscopy (FEG-SEM) and transmission electron microscopy (TEM) observations. Furthermore, X-ray photoelectron spectroscopy (XPS) measurements confirmed the presence of Tb (38.5 and 41.2% for 1.70 and 3.00 at.% Tb, respectively) in addition to Tb in the resulting HSs, with increasing Tb content with both Tb doping and higher calcination temperatures. Then, these HSs can be considered as rare earth (RE) co-doped systems, at least for 1.70 and 3.00 at.% Tb contents being the transition to rutile phase favored by Tb doping for those compositions. Finally, diffusion of Tb from the inner parts to the surface of the HSs with the calcination treatments was also observed by XPS., This work was supported by Science and Innovation Ministry (Government of Spain) and FEDER Funds under Grant PID-2019-104118RB-C21.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biocompatible Probes Based on Rare-Earth Doped Strontium Aluminates with Long-Lasting Phosphorescent Properties for In Vitro Optical IMAGING

  • Calatayud, David G.
  • Jardiel, Teresa
  • Cordero-Oyonarte, Erica
  • Caballero Cuesta, Amador
  • Villegas, Marina
  • Valle-Noguera, Ana
  • Cruz-Adalia, Aránzazu
  • Peiteado, Marco
(This article belongs to the Special Issue Metals and Metal Oxides for Biomedical Applications: Current Challenges and Opportunities), In recent decades, the demand for biomedical imaging tools has grown very rapidly as a key feature for biomedical research and diagnostic applications. Particularly, fluorescence imaging has gained increased attention as a non-invasive, inexpensive technique that allows real-time imaging. However, tissue auto-fluorescence under external illumination, together with a weak tissue penetration of low wavelength excitation light, largely restricts the application of the technique. Accordingly, new types of fluorescent labels are currently being investigated and, in this search, phosphorescent nanoparticles promise great potential, as they combine the interesting size-dependent properties of nanoscale materials with a long-lasting phosphorescence-type emission that allows optical imaging well after excitation (so avoiding autofluorescence). In this work, core-shell structures consisting of SrAlO:Eu,Dy luminescent cores encapsulated within a biocompatible silica shell were prepared, showing a green persistent phosphorescence with an afterglow time of more than 1000 s. A high-energy ball milling procedure was used to reduce the size of the starting phosphors to a size suitable for cellular uptake, while the silica coating was produced by a reverse micelle methodology that eventually allows the excitation and emission light to pass efficiently through the shell. Confocal fluorescence microscopy using HeLa cancer cells confirmed the potential of the all-ceramic composites produced as feasible labels for in vitro optical imaging., This work was supported by the Agencia Estatal de Investigación through PID2019-104118RB-C21 project and the Ministerio de Economía, Industria y Competitividad, Agencia Estatal de Investigación, through MAT2016-80182-R project. Dr T. Jardiel acknowledges the European Science Foundation (ESF) and the Ramon y Cajal Program of MICINN for financial support. D.G. Calatayud also acknowledges the Fundación General CSIC (ComFuturo Program) for financial support. Dr. A Cruz-Adalia wishes to thank the Confocal Microscopy Core Facility of the Centro Nacional de Biotecnología (CNB) for its technical support and acknowledges the Spanish Ministry of Science, Innovation and Universities (MICINN), Agenda Estatal de Investigación, and Fondo Europeo de Desarrollo Regional (FEDER) for the Ramon y Cajal Program and financial support (RTI2018-093647-B-I00)., Supplementary Materials: The following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/ijms23063410/s1
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Template-free hydrothermal preparation of IR-blue light upconverting NaYF4: Yb, Eu phosphors, Síntesis hidrotermal de fósforos anti-Stokes en ausencia de «template» para la conversión de radiación IR en luz azul: NaYF4: Yb, Eu

  • Ruiz-Santaquiteria, Cristina
  • Calatayud, David G.
  • Gutiérrez, Kevin
  • Villegas, Marina
  • Peiteado, Marco
  • Jardiel, Teresa
Please cite this article in press as: C. Ruiz-Santaquiteria, et al., Template-free hydrothermal preparation of IR-blue light upconverting NaYF4: Yb, Eu phosphors, Bol. Soc. Esp. Cerám. Vidr. (2023), https://doi.org/10.1016/j.bsecv.2023.07.00, [EN] Highly efficient IR-blue light up-converting NaYF4: Yb3+, Eu2+ phosphors have been prepared by a template-free hydrothermal method under mild and reductive experimental conditions. It has been demonstrated that for a fixed reaction time and temperature (150 °C/4 h), the α → β NaYF4 conversion can be accurately controlled by modifying the F/Y ratio. UC emission spectroscopy reveals that IR-blue light emission efficiency is greatly improved when β-NaYF4 phase predominates. Under the experimental conditions set in this work, reaching full α → β conversion just by increasing fluoride content entails the co-crystallization of the secondary phase YF3 1.5NH3, but far from causing a detrimental effect on the optical properties, it has been found that the samples where both β-NaYF4 and YF3 1.5NH3 phases coexist, exhibit outstanding optical properties., [ES] Fósforos anti-Stokes NaYF4: Yb3+, Eu2+ de alta eficiencia para la conversión de radiación infrarroja en luz azul han sido satisfactoriamente sintetizados mediante un procedimiento hidrotermal en medio reductor, en ausencia de «template» y bajo condiciones experimentales suaves. Se ha demostrado que, para un tiempo y temperatura de reacción dados (150 °C/4 h), el equilibrio entre las fases polimórficas α→β del NaYF4 puede ser controlado de manera precisa mediante la modificación de la relación F/Y en el medio de reacción. Los resultados obtenidos mediante espectroscopía de fluorescencia revelan que la eficiencia con la que los fósforos sintetizados transforman radiación IR en luz azul aumenta significativamente cuando la fase predominante es β-NaYF4. Bajo las condiciones experimentales establecidas en esta investigación, alcanzar una conversión α→β completa modificando únicamente el contenido de iones fluoruro conlleva la co-cristalización de la fase secundaria YF3 1.5NH3 pero, lejos de entrañar un efecto negativo, se ha comprobado que los materiales luminiscentes donde ambas fases β-NaYF4 e YF3 1.5NH3 coexisten, exhiben propiedades ópticas excepcionales., This work was funded by MCIN/AEI /10.13039/501100011033 under project PID2019-104118RB-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, characterization, and photocatalytic activity for water remediation and hydrogen evolution of Zn(II) and Ni(II) bis(thiosemicarbazone) complexes

  • Burón, Rodrigo
  • Jiménez-Gómez, Daniel
  • Calatayud, David G.
  • Iglesias-Juez, Ana
  • Fresno, Fernando
  • Mendiola, M. Antonia
  • López-Torres, Elena
The extensive industrial use of organic dyes causes large amounts of these substances to arrive at water sources, so nowadays, organic compound removal from fresh water is a major concern. The use of photocatalysts is an interesting approach to solving this problem, with coordination compounds playing an outstanding role. We report the selective synthesis and characterization of three new dissymmetric bis(thiosemicarbazone) ligands and their nickel(II) and zinc(II) complexes, which have been fully characterized by several techniques. The photocatalytic activity of the six complexes for methyl orange degradation was also evaluated. All the complexes can degrade this organic dye, although the photoefficiency of the nickel compounds is, in general, higher than for the zinc ones, as the degradation is faster and they do not reach a plateau. Density functional theory calculations show a clear dependence of the highest occupied molecular orbital (HOMO)–lowest unoccupied molecular orbital (LUMO) gap, as well as with the relative energies of these orbitals. On the other hand, the need for green fuels that do not produce the greenhouse effect is one of the major goals of modern life, and molecular hydrogen is one of the most promising ones. Considering the proven potential of bis(thiosemicarbazone) complexes to electrocatalyze H2 evolution recently reported in the literature, we also made some preliminary tests to investigate the potential of the nickel complexes to act as photocatalysts for water splitting. The results indicate that two of the complexes produce H2 in the conditions tested, so they could be used in the development of efficient photocatalytic systems for hydrogen evolution., The authors thank the Ministerio de Ciencia e Innovación (MICINN) (Project PID2019-104118RB-C21) for funding., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual luminescent and magnetic properties in Ti1-xNdxO2-x solid solutions with nanoscaled rutile

  • Colomer, María T.
  • Quesada, Adrián
  • López-Sánchez, Jesús
  • Martínez, Jesús I.
  • Mather, Glenn C.
  • Molina, Pablo
In this work, we have synthesised Ti1-xNdxO2-0.5x solid solutions (0.05 ≤ x ≤ 0.10) by a colloidal sol−gel route followed by calcination at 400, 700 or 900 °C in air for 10 min. Pure rutile solid solutions were obtained when calcined at 900 °C for compositions up to 1 mol% Nd3+. On doping with 2, 3, 5, and 10 mol% Nd3+, the solid solutions are comprised of rutile and Nd4Ti9O24 as second phase according to XRD. In addition, by HREM TiO1.9 Magneli series is also observed as a trace. Photoluminescence (PL) decay curves show a multi−exponential decay behaviour likely attributable to the structural properties of the host matrix and the formation of at least two different microenvironments. Moreover, to the best of our knowledge, it is shown for the first time that, in addition to PL emission, rutile solid solutions with x = 0.03 present ferromagnetic behaviour with a robust magnetic hysteresis. According to the magnetisation measurements, the isolated Nd3+ centres, detected by EPR, are magnetically non−interacting; in addition, Nd4Ti9O24 presents a paramagnetic behaviour. Furthermore, the height of the EPR feature increases for Nd3+ content below 3 mol%, reaches a maximum for this value, and decreases for higher values of Nd3+. In this framework, a plausible explanation is that a non−stoichiometric Nd−Ti−O based phase, undetectable via XRD or Raman but detectable by PL and magnetisation measurements, hosts the magnetic order. These results pave the way for the development of novel optomagnetic multifunctional nanomaterials., This work was supported by the Science and Innovation Ministry (Government of Spain) and FEDER Funds under the Grants n° PID2019−104118RB−C21, and PID2022−140923NB−C21, and also through next generation funds, grants TED2021−130809B−I00 and TED2021–130957B−C51, and CNS2022–135876 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR, and grant PID2021−124585NB−C33 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dual luminescent and magnetic properties in Ti1-xNdxO2-δ solid solutions with nanoscaled rutile

  • Colomer, María T.
  • Quesada, A.
  • López-Sánchez, J.
  • Martínez Martínez, Jesús Ignacio
  • Mather, G.C.
  • Molina, P.
In this work, we have synthesised Ti1-xNdxO2-0.5x solid solutions (0.05 ≤ x ≤ 0.10) by a colloidal sol−gel route followed by calcination at 400, 700 or 900 °C in air for 10 min. Pure rutile solid solutions were obtained when calcined at 900 °C for compositions up to 1 mol% Nd3+. On doping with 2, 3, 5, and 10 mol% Nd3+, the solid solutions are comprised of rutile and Nd4Ti9O24 as second phase according to XRD. In addition, by HREM TiO1.9 Magneli series is also observed as a trace. Photoluminescence (PL) decay curves show a multi−exponential decay behaviour likely attributable to the structural properties of the host matrix and the formation of at least two different microenvironments. Moreover, to the best of our knowledge, it is shown for the first time that, in addition to PL emission, rutile solid solutions with x = 0.03 present ferromagnetic behaviour with a robust magnetic hysteresis. According to the magnetisation measurements, the isolated Nd3+ centres, detected by EPR, are magnetically non−interacting; in addition, Nd4Ti9O24 presents a paramagnetic behaviour. Furthermore, the height of the EPR feature increases for Nd3+ content below 3 mol%, reaches a maximum for this value, and decreases for higher values of Nd3+. In this framework, a plausible explanation is that a non−stoichiometric Nd−Ti−O based phase, undetectable via XRD or Raman but detectable by PL and magnetisation measurements, hosts the magnetic order. These results pave the way for the development of novel optomagnetic multifunctional nanomaterials.