Pasar al contenido principal

CO2 COMO MATERIA PRIMA EN LA TERMOCATALISIS Y SU TRANSFORMACION EN COMBUSTIBLES Y PRODUCTOS QUIMICOS

PID2021-126235OB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 36
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mixed metal oxide bronzes as catalysts for the gas-phase aerobic transformation of glycerol to acrylic acid: Single or double catalytic bed approaches

  • De Arriba-Mateos, Agustín
  • Delgado-Muñoz, Daniel
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Metal-doped hexagonal tungsten oxide bronzes (h-WVOx and h-WNbOx) and metal-doped orthorhombic molybdenum oxide bronzes-M1 type (MoVOx, MoVTeOx and MoVTeNbOx) have been synthesized hydrothermally and heat-treated at 400, 550 or 600 degrees C in N-2. The catalysts were characterized by several techniques and tested in the one-pot aerobic transformation of glycerol at 350 degrees C. From all of them, h-WNbOx resulted as the most selective to acrolein (80 % yield), whereas both h-WVOx and MoVTeNbOx were more effective to acrylic acid (with a yield lower than 25 %). Subsequently, a double-bed reactor comparative study was conducted, with h-WNbOx acting as the first catalytic bed. In this case, the yield to acrylic acid decreased as follows: MoVTeNbOx > MoVTeOx > MoVOx > h-WVOx. IR spectroscopy of acrolein adsorbed on these catalysts allows to explain the catalytic performance of these catalysts., The funding received for this study from the Spanish Ministry of Science and Innovation, PID2021-126235OB-C31 funded by MCIN/AEI/10.13039/501100011033 and FEDER funds, and project TED2021-130756B-C32 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR, is acknowledged. This Special Issue is dedicated to honor the 10th International Symposium on Group V (IV and VI) Elements, a gathering of interna-tional researchers, industry, young researchers, and students to help shape the vision of the future for these elements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

CO2-assisted hydrogen recovery from isopropanol over Ni/CeO2 catalysts: Thermodynamic and kinetic insights

  • Garcia-Sanchez, Julieth T.
  • Karelovic, Alejandro
  • Schnee, Josefine
  • Krafft, Jean-Marc
  • Ballesteros-Rueda, Luz Marina
  • Baldovino-Medrano, Victor Gabriel
  • Gómez-Acosta, Daviel|||0000-0003-0010-4507
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] The difficulties and risks associated with the storage and transport of hydrogen are among the chief challenges for the development of a hydrogen economy. In this context, the use of hydrogen carriers such as the alcohols derived from biomass are deemed promising alternatives to safe storing and transportation. A route for recovering hydrogen from alcohols is their catalytic oxidation with soft oxidizing agents that avoid the combustion of the alcohol. Within this context, we analyze herein the catalytic oxidation of isopropanol with CO2. Particularly, we did a thermodynamic equilibrium analysis of the reaction and performed catalytic experiments over Ni/CeO2 catalysts of different metallic loadings. The results of the thermodynamic analysis showed the production of H2 and CH4 accompanied by coke between 100-400 degrees C, at atmospheric pressure. On the other hand, the catalytic tests showed that increasing the Ni loading of Ni/CeO2 enhances both isopropanol conversion and H2 production. Furthermore, CH4 formed for the catalyst with the highest Ni loading. Operando DRIFTS analysis suggested that Ni promotes the dehydrogenation of isopropanol to acetone. But, this penalizes the lifespan of the catalyst owing to the promotion of the formation of carbonaceous deposits. Meanwhile, the basic sites on CeO2 reduce CO2 to CO. This process mitigates acetone and propene formation whose further transformation contributes to coke production. Overall, the catalytic results indicated that the recovery of molecular hydrogen and methane from isopropanol in the presence of CO2 is governed by the competitive adsorption of isopropanol and CO2 on the catalyst surface., Authors thank the Laboratorio de Rayos X of the Universidad Industrial de Santander for the acquisition of the XRD patterns and Microscopy Service of UPV for the TEM and STEM-EDX measurements. J.T. G.S is grateful for the funding provided by MinCiencias (convocatoria 933) and "For Women in Science" award for her PhD studies. P.C. and D. G. thank the Ministerio de Ciencia, Innovacion y Universidades, grant number PID2021-1262350B-C31, and the international collaboration project LINCGLOBAL (LINCG23026) of the state agency superior council for scientific research (CSIC).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring the Photocatalytic and Electrocatalytic activity of Mo and W-based catalysts for overall water splitting process

  • Myltiykbayeva, Zhannur K.
  • Muktaly, DInara
  • Imanbayev, Yerzhan
  • Koca, Atif
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Moreno-Torralbo, Beatriz Maria
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] The research focuses on assessing Mo and W containing catalysts in terms of both photocatalytic hydrogen evolution reaction (HER) and electrocatalytic overall water splitting process. Special attention is given to the structural and electronic parameters of these materials, which contribute to their catalytic efficiency. The results indicated that the S-containing molybdenum-based catalysts heat-treated at 320 ¿C (MoS-A320) shows the highest photocatalytic and electrocatalytic activities among all structures. The hydrogen evolution rate of 1.16 mmol h-1g-1 with good stability indicate its usability in the photocatalytic HER. Electrocatalytic HER measurements indicated that MoS-A320 revealed 73 mV overpotential at 10 mA cm¿² with a Tafel slope of 58 mV dec¿¹. The electrode preserved 93% of its activity during 12 h chronoamperometric testing, closely matching the durability of Pt catalysts. Observation of considerably high oxygen evolution reaction (OER) performances of MoS-A320 indicates its bifunctionality and usability at both anode and cathode of the water electrolyzers. The enhanced photocatalytic activities of MoS-A-320 are explained by the optical and morphological traits which are tailored with the annealing temperature. Additionally enhanced conductivity and high surface area of this structure are the fundamental features for the higher bifunctional electrocatalytic activity. This study provides insights into the design of efficient catalysts for renewable energy conversion and environmental sustainability., This research was financially supported by the Ministry of Science and Higher Education of the Republic of Kazakhstan (AP23486934, Development of new efficient photocatalytic systems for hydrogen production using composites of metal disulfides and petroleum porphyrins). JMLN, BMMT and PC thanks also the financial support from the Spanish Ministry of Science and Innovation, project PID2021 126235OB-C31, funded by MCIN/ AEI/10.13039/501100011033 and FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic oxidation of volatile organic compounds with Mn-zeolites

  • Toloza-Blanco, Lyzed Arelis
  • Góra-Marek, Kinga
  • Tarach, K. A.
  • Sobalska, J.
  • Plá-Hernandez, Adrián
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Mn-catalysts supported on zeolites are active materials for oxidising volatile organic compounds, but the catalysts' activity and selectivity depend on the support's characteristics. In this work, we study the performance of different Mn catalysts supported on zeolites with different Si/Al ratios and topology in the ethanol oxidation reaction. The results show a correlation between the mechanism of the reaction and the presence or absence of acid sites on the zeolite surface, which is based on its aluminium content. It is observed that the presence of Bronsted acid sites catalyses ethanol dehydration to ethylene that is oxidised to CO2 at higher temperatures. Without protonic acid sites, ethanol is primarily oxidised to acetaldehyde and subsequently oxidised to CO2, achieving a complete oxidation at lower temperatures. The acidity also influences the nature of the metallic active sites, forming Mn-oxo species with higher oxidation state in the catalyst with lower aluminium content. These species are more active than those formed in the catalyst enriched with Bronsted acid sites. Thus, zeolites with higher Si/Al ratios are more adequate for supporting Mn catalysts in the ethanol oxidation reaction. The results show that low acidity is a decisive factor in designing active catalysts for this reaction, while zeolite topology or catalyst surface area are of secondary importance., The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033; TED2021-131715B-I00 grant funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGeneration EU/PRTR and PID2021-126235OB-C31) . Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. L. Toloza thanks Fundacion Carolina for the pre-doctoral grant, call 2019-2020 Universidad Central de Colombia and Universitat Politecnica de Valencia agreement. A. Pla-Hernandez thanks Spanish Ministry of Science and Innovation for the pre-doctoral grant PRE2019-088100, associated with the project RTI2018-101784-B-I00. FT-IR and UV-vis in situ and operando studies were financed by Grant No. 2021/41/B/ST4/00048 from the National Science Centre, Poland.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic activation of N2O on promoted NiO based materials: Valorization by oxidative dehydrogenation of ethane

  • Sánchez-García, G.
  • Pérez-Calvo, A.
  • Sánchez-Tovar, R.
  • Dejoz, A.M.
  • Solsona, B.
  • Moreno-Torralbo, Beatriz Maria
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] N2O-assisted Oxidative Dehydrogenation (ODH) of ethane is an interesting way of simultaneously obtaining a highly valuable raw material (ethylene) and the functionalization of a greenhouse gas (N2O). Unfortunately, over most of the catalytic systems, this reaction presents two main drawbacks: i) high yields to ethylene have hardly been reported; and ii) the catalytic activity highly decreases when replacing molecular oxygen by N2O. In the present article, it will be shown that with promoted NiO catalysts, and using N2O, high activity, comparable with that of conventional O2-assisted ODH of ethane, is achieved. Furthermore, the use of the appropriate dopant, such as niobium, allows high ethylene yields (40 %), with a selectivity to ethylene of 72 % at 55 % ethane conversion. Overall, the catalytic results obtained indicate that the presence/absence and the nature of the promoter determines the catalytic performance of NiO based catalysts and the selectivity to ethylene can be explained on the basis of the electrochemical properties of the catalysts, correlating with parameters such as the density of acceptor defects (cationic vacancies) and the charge-transfer resistance at the interfacial active sites of the catalysts. Interestingly, the most selective catalyst (i.e., Nb-doped NiO) is highly robust as it presents stable catalytic performance after 24 h online and Ni2+ species are not reduced to Ni0 even working at high temperatures in N2O-free conditions., The funding received for this study from the Spanish Ministry of Science and Innovation, projects PID2021-126235OB-C31 and PID2021-126235OB-C33 (funded by MCIN/AEI/10.13039/501100011033 and FEDER funds) and projects TED2021-130756B-C31 and TED2021-129555B-I00 (funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR) , is acknowledged. BMT, PC, and JMLN also thank CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033. G. Sanchez-Garcia is also grateful to the Generalitat Valenciana (CIACIF/2021/010) and A. Perez-Calvo to Ministerio de Ciencia, Innovacion y Universidades (FPU23/02557) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of Tetrahydrofuran Derivatives from 5-Hydroxymethylfurfural: Selective Ring Hydrogenation of HMF and Cascade Transformations over Pd Supported on Amino-Modified ITQ-2 Zeolite

  • Moriana-Herraiz, Carlos
  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] 5-Hydroxymethylfurfural (HMF) has been efficiently hydrogenated into the highly valuable 5-hydroxymethyltetrahydrofurfural (HMTHF) through the selective hydrogenation of the furan ring using Pd supported on pure silica ITQ-2 zeolite functionalized with amino groups (Pd-NITQ-2). Highly dispersed nanosized Pd nanoparticles were generated on the amino functionalized support, which exhibits high activity and selectivity to HMTHF. Yields up to 97% (99% selectivity) of HMTHF were achieved by working at room temperature under 10 bar hydrogen using ethanol as a solvent. Comparatively, Pd supported over nonfunctionalized ITQ-2 (Pd-ITQ-2) showed 17 times lower activity than Pd-NITQ-2. The IR of CO titration studies showed that on Pd-ITQ-2, catalyst oxophilic Pd species (Pd delta+) are generated, which is related to their lower activity in H2 activation and therefore their lower activity in the hydrogenation of the furan ring with respect to the Pd-NITQ-2 sample. The effect of Pd loading on NITQ-2, as well as the solvent effect, was studied. The optimized catalyst ((1%)-Pd-NITQ-2) was stable and could be reused for seven consecutive cycles, practically maintaining activity and selectivity. Finally, the optimized catalyst was applied to three different two-step cascade processes to obtain tetrahydrofuran substituted Knoevenagel adducts, N-substituted tetrahydrofurfurylamines, and tetrahydrofuran-substituted benzimidazole derivatives., This work has been funded by the Spanish Ministry of Science and Innovation through the "Severo Ochoa Program" (CEX-2021-001230-S), the PID2021-126235OB-C31, and PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by "ERDF A way of making Europe project. C.M. thanks the Severo Ochoa program for predoctoral fellowships. The authors also thank the Microscopy Service of UPV for the TEM measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stabilization of the Active Ruthenium Oxycarbonate Phase for Low-Temperature CO2 Methanation

  • Tebar-Soler, Carmen|||0000-0001-7054-4503
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Diaconescu, Vlad Martin
  • Simonelli, Laura
  • Missyul, Alexander
  • Perez-Dieste, Virginia
  • Villar-Garcia, Ignacio
  • Gómez, Daviel
  • Brubach, Jean-Blaise
  • Roy, Pascale
[EN] Interstitial carbon-doped RuO2 catalyst with the newly reported ruthenium oxycarbonate phase is a key component for low-temperature CO2 methanation. However, a crucial factor is the stability of interstitial carbon atoms, which can cause catalyst deactivation when removed during the reaction. In this work, the stabilization mechanism of the ruthenium oxycarbonate active phase under reaction conditions is studied by combining advanced operando spectroscopic tools with catalytic studies. Three sequential processes: carbon diffusion, metal oxide reduction, and decomposition of the oxycarbonate phase and their influence by the reaction conditions, are discussed. We present how the reaction variables and catalyst composition can promote carbon diffusion, stabilizing the oxycarbonate catalytically active phase under steady-state reaction conditions and maintaining catalyst activity and stability over long operation times. In addition, insights into the reaction mechanism and a detailed analysis of the catalyst composition that identifies an adequate balance between the two phases, i.e., ruthenium oxycarbonate and ruthenium metal, are provided to ensure an optimum catalytic behavior., This research was funded by Ministerio de Ciencia, Innovacion y Universidades, grant number PID2021-1262350B-C31, and Generalitat Valenciana (GVA), grant number CIAICO/2021/2138. This study formed part of the Advanced Materials programme and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) and Generalitad Valenciana (ref MFA/2022/016 and TED2021-130756B-C32). C.T.S acknowledges the Polytechnical University of Valencia for the economic support through the grant of an FPI scholarship associated with the PAID programme "Programa de Ayudas de Investigacion y Desarrollo." XAS, XPS, and XRD experiments were performed at the ALBA Synchrotron with the collaboration of ALBA staff. IR experiments were performed at the SOLEIL Synchrotron with the collaboration of the SOLEIL staff. This research used resources of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science user facility operated for the DOE Office of Science by the Argonne National Laboratory under Contract No.DE-AC02-06CH11357.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Upgrading the reflux method as novel route for competitive catalysts in alkane selective oxidation

  • Masso Ramírez, Amada
  • De Arriba-Mateos, Agustín
  • Ivars Barceló, Francisco
  • Ykrelef, Adel
  • Solsona, Benjamín
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] In the present article we show that, although the reflux method is not common for the synthesis of multicomponent MoVTeNbO catalysts, an optimized reflux synthesis of metallic precursors leads to efficient materials for the oxidative dehydrogenation of ethane and the selective oxidation of propane into acrylic acid, with the results at the same level as those of the best catalysts reported in the literature to date. It has been demonstrated that the reflux temperature is of paramount importance to achieve active and selective catalysts. Thus, the incorporation of vanadium and niobium to a polyoxometalate in the catalyst precursors is favored by refluxing at 110 & DEG;C, promoting the formation of the desired orthorhombic M1 phase. Additionally, the incorporation in the synthesis gel of cations such as ammonium or methylammonium provokes a further improvement of the catalytic performance whenever the activation procedure is carefully controlled., The authors gratefully acknowledge the financial support by the Ministerio de Ciencia e Innovacion of Spain, MINECO/FEDER (Projects: PID2021-126235OB-C31, PID2021-126235OB-C33, TED2021-130756B-C32 and TED2021-129555B-I00). F. Ivars-Barcelo gratefully acknowledges the support from "Ramon y Cajal" excellence program for recruitment (Ref.: RYC2020-029470-I/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects Of Preparation Method On Catalytic Behavior Of Ni-Me (Me = Co, Nb)/y-Al2O3 For Oxidative Dehydrogenation Of Ethane

  • Hurtado Cotillo, Mario
  • Solsona Espriu, Benjamín Eduardo
  • Sun Kou, Rosario
  • Picasso, Gino
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Catalysts based on Ni-Me (Me = Co, Nb) supported on gamma-Al 2 O 3 were prepared by the coprecipitation-chemical deposition method via reflux, and hydrothermal method for oxidative dehydrogenation of ethane. For coprecipitation method, ammonia and urea were used as precipitating agents. In both methods, the Ni content was 30 wt.%, whereas that of Me (Co, Ni) was 5 wt.%. The activity and selectivity towards ethylene appeared to depend strongly on the composition of the catalysts and, interestingly, on the preparation conditions. In the present article, it is shown that mixed hydrothermal samples using urea showed the best performance. Specifically, the hydrothermally prepared NiNb/gamma-Al2O3 gamma-Al 2 O 3 sample was the one that showed the highest values. The introduction of Nb to Ni framework allowed to enrich with nucleophilic oxygen sites displayed via X-ray photoelectronic spectra (XPS) which lead to the formation of low reducible and selective sites., The authors thank the following institutions for funding the projects: FONDECYT: contract 138-2019, project No. 237-2015-FONDECYT, Project 219-2015-FONDECYT; and Spanish Ministry of Economy and Competitiveness, MINECO/FEDER (PID2021-126235OB-C31, PID2021-126235OB-C33) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Two-stage process combining N2O decomposition and ethane ODH over a MoVTeNbO-M1 catalyst

  • Sanchez-Garcia, Ginebra
  • De Arriba-Mateos, Agustín
  • Dejoz, Ana M.
  • Sanchez-Tovar, Rita
  • Solsona, Benjamin
  • Moreno-Torralbo, Beatriz Maria
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Multicomponent MoVTeNbO catalysts containing the orthorhombic M1 phase are highly active for the oxidative dehydrogenation (ODH) of ethane using O2 as oxidant, but their performance with N2O is strongly limited by the low efficiency of N2O decomposition capacity of the M1 catalyst. To overcome this limitation, we propose a strategy based on decoupling N2O decomposition from ethane oxidative dehydrogenation in a tandem reactor; in which N2O is decomposed in an upstream bed prior to contacting ethane with the M1 catalyst. Two different N2O decomposition catalysts were evaluated, i.e., CeO2 and a Cs-doped cobalt oxide (Cs-Co3O4), along with M1 catalyst. While with CeO2 the catalytic performance of the M1 catalyst was improved (by efficiently generating reactive oxygen species from N2O), with the Cs-Co3O4 we observed near-complete N2O conversion, leading to significantly higher ethane conversion and enhanced olefin yields of the subsequent M1 catalyst. In addition, different reactor configurations show that physical separation of both processes is essential to maximize performance, enabling high ethane conversion and ethylene selectivity at moderate temperatures. Characterization of fresh and spent catalysts indicates that performance is governed by the dynamic redox state of the M1 surface, strongly dependent on the oxidizing environment. These results demonstrate that decoupling oxidant generation from hydrocarbon conversion is an effective strategy for N2O valorization and selective ethane ODH., We thank: Spanish Ministry of Science and Innovation: PID2021-126235OB-C33 grants funded by MCIN/AEI/10.13039/501,100,011,033, PID2021-126235OB-C31 and CEX2021-001,230-S grants funded by MCIN/AEI/10.13039/501,100,011,033 Generalitat Valenciana (GVA): CIACIF/2021/010 grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dehydration of xylose to furfural catalyzed by highly stable W-Nb-O mixed oxides Bronzes

  • Cernicharo-Toledo, Francisco
  • Domine, Marcelo Eduardo
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • De Arriba-Mateos, Agustín
  • López Sánchez, Jesús
[EN] In this work, the dehydration reaction of xylose (a representative C5 sugar) to furfural has been studied over W-Nb-O mixed oxides presenting hexagonal or pseudo-crystalline Bronze-type structure with controlled textural and acid properties, and also high stability under reaction conditions. Thus, a series of W-Nb-O metal oxides with different W/Nb ratios have been prepared hydrothermally, characterized by several physicochemical techniques and tested in autoclave-type reactors in liquid phase. Their influence on the catalytic activity has been assessed by tuning the Brønsted/Lewis acid properties of W-Nb-O materials. Interestingly, optimal catalytic results for the dehydration of xylose to furfural in monophasic system (water/ethanol mixture) were achieved for W0.20Nb0.80Ox catalyst, with a furfural selectivity comparable to that of sulfuric acid industrial catalyst. Furfural productivity (0.683 gFur ¿ gCat ¿ 1 ¿ h¿ 1) attained with this W-Nb-O catalyst was higher than that calculated for most relevant and recently reported solid acid catalysts working in both mono- and bi-phasic systems, respectively. Catalytic activity of W-Nb-O material remained practically unchanged after three consecutive reuses, while structure and chemical composition of material were maintained unaltered either after three catalytic cycles or after 14 days experiment carried out under optimal reaction conditions. Reactivity results have been explained on the combination of both Brønsted and Lewis acid sites as a result of the different incorporation of niobium into the bronze structure., Authors thank financial support by the Spanish Government (PID2021-125897OB-I00, PID2021-126235OB-C31, and PID2023- 151036OA-I00) funded by MCIN/AEI/10.13039/501100011033 and FEDER funds. Financial support by European Commission, H2020 Pro-gram (HIGFLY Project, grant agreement N degrees 101006618) is gratefully acknowledged. J.L.-S. acknowledges grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF +) . Authors also thank Miriam Parreño-Romero and the Electron Microscopy Service of Universitat Politècnica de València for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancement of ethylene production by alkali metal doping of MoVSb mixed oxide catalyst for ethane oxidative dehydrogenation

  • Ivars Barceló, F.
  • Solsona, B.
  • Asedegbega-Nieto, E.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] Hydrothermally prepared Mo-V-Sb mixed oxides doped with alkali metal cations (Li+, Na+, K+, Rb+, or Cs+) show a significantly improved catalytic behavior in the oxidative dehydrogenation of ethane (ODH) compared to conventional alkali metal-free MoVSbO catalysts. Initial selectivity to ethylene above 95 % was held up to 20 % of ethane conversion for all alkali metal promoted MoVSbO catalysts, as well as lower ethylene overoxidation at higher ethane conversion, with differences depending on the alkali metal employed. Thus, from Li to K, the enhanced catalytic performance follows a bottom-up trend as increasing the size of the cation. An intermediate behavior is observed though for the catalyst doped with Cs cations, with the highest atomic radius. The K-doped MoVSbO catalyst is the least prone to both ethane total oxidation and ethylene overoxidation, which enables up to 90 % selectivity to ethylene at ethane conversion higher than 65 %., This work was supported by the Ministerio de Ciencia e Innovacion of Spain (projects PID21-126235OB-C31 and PID21-126235OB-C33). F. Ivars-Barcelo also acknowledges the Ministerio de Ciencia e Innovacion of Spain by the support from the "Ramon y Cajal" excellence grant (Ref.: RYC2020-029470-I/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the selective transformation of ethanol over Mg- and/or La-containing mixed oxides catalysts

  • Ballesteros Plata, D.
  • Balestra, G.
  • Cecilia, J.A.
  • Barroso Martín, I.
  • Infantes-Molina, A.
  • Tabanelli, T.
  • Cavani, F.
  • Montaña, M.
  • Rodríguez Castellón, E.
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] MgO-La2O3 catalysts with different Mg/La molar ratio were synthesized by a precipitation method and a subsequent calcination and then characterized by x-ray diffraction, N2 adsorption-desorption isotherms (at-196 degrees C), CO2- and NH3-thermoprogrammed desorption and x-ray photoelectronic spectroscopy. The coexistence of acid and basic sites promoted the selective transformation of ethanol into valuable products. Thus, MgO catalyst promoted the Guerbet reaction obtaining n-butanol as product while the incorporation of La2O3 in the catalytic system improved the ethanol conversion notably, obtaining ethylene as the main product due to a dehydration reaction. The highest ethylene yield was obtained for the catalyst with a Mg/La molar ratio of 1., The funding received for this study from the Spanish Ministry of Science and Innovation, PID2021-126235OB-C31 and PID2021-126235OB-C32 funded by MCIN/AEI/10.13039/501100011033 and FEDER funds, and projects TED2021-130756B-C31 and TED2021-130756B-C32 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR, is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spectroscopic insights into the role of CO2 on the nature of Cr species in a CrOX/Al2O3 catalysts during ethane dehydrogenation with CO2

  • Franceschini, Gustavo do N.
  • Schwaab, Marcio
  • Rangel, Maria do Carmo
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] The dehydrogenation of ethane with CO2 was studied on CrOx/Al2O3 catalysts (8 wt% of CrOx) in the 600-675 degrees C temperature range. The role of CO2 was determined by comparison with catalytic and spectroscopic data of ethane dehydrogenation without CO2. Characterization of fresh catalyst suggested an intimate interaction of Cr and support. Moreover, in situ Raman spectroscopic analysis combined with oS studies done on reaction exposed samples indicated changes in both the nature of active Cr species and the reaction mechanism depending on the reaction conditions (i.e., presence/absence of CO2, and the reaction temperature). At lower temperatures (600-625 degrees C), CO2 promotes the re-oxidation of Cr3+ to Cr6+ favoring the oxidative dehydrogenation (ODH) route. While at higher temperatures (650-675 degrees C), the reaction occurs mainly via a catalytic dehydrogenation mechanism, as CO2 is no longer capable of re-oxidizing Cr3+ to Cr6+, with CO2 inhibiting partially the formation of coke., The authors would like to acknowledge the Ministerio de Ciencia e Innovacion of Spain (projects PID2021-126235OB-C31, TED2021-130756B-C32 and the Generalitat Valenciana (project MFA/2022/016) for the financial support. The authors also acknowledge Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior - Brasil & nbsp;(CAPES/Print, UFRGS 2020) for the scholarship to G. do N. Franceschini.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of Cs-W-V-O hexagonal tungsten bronzes for the partial oxidation of ethanol to acetaldehyde

  • Gagliardi, Anna
  • De Arriba-Mateos, Agustín
  • Delgado-Muñoz, Daniel
  • Vallejo, Maria Jose
  • López-Sánchez, Jesús
  • Tabanelli, Tommaso
  • Rubio-Zazo, Juan
  • Cavani, Fabrizio
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] While bioethanol has been acknowledged as a relevant bioderived feedstock, acetaldehyde is an important commodity used to produce a variety of industrial chemicals, and its manufacture currently relies almost exclusively on fossil ethylene. This paper shows the effect of Cs-content in W-V-O hexagonal tungsten bronze catalysts on changes in both the physicochemical characteristics of catalysts and their catalytic performance in the aerobic transformation of ethanol to acetaldehyde, providing a promising pathway to broaden the domain of biorefinery products. The catalytic results were explained on the basis of the elimination of acid sites (responsible to the formation of ethylene and diethyl ether) by the incorporation of Cs+, as interstitial cations, in V-containing hexagonal tungsten bronzes. The catalysts were characterized by XRD, IR, XPS and FESEM, among others, and the incorporation of Cs+ into the bronze backbone, successfully demonstrated by HAXPES and confocal Raman techniques, led to 33% EtOH conversion and 97% acetaldehyde selectivity in the best catalyst¿s formulation,, The funding received for this study from the Spanish Ministry of Science and Innovation, PID2021-126235OB-C31, PID2021-122980OBC5 and PID2023-151036OA-I00 funded by MCIN/AEI/10.13039/501100011033 and FEDER funds, and projects TED2021-130756B-C32 and RYC2022-035912-I funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe by the European Union NextGenerationEU/PRTR, is acknowledged. Authors would also like to thank the European Synchrotron Radiation Facility (beamtime project A25-02-1068), MICIN and Consejo Superior de Investigaciones Científicas for the use of the synchrotron radiation facilities through project PIE 2010 6 0E 013 and to the BM25-SpLine staff for their valuable help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal Oxide Bronzes as Catalysts and Catalyst Precursors for Redox and/or Acid Catalysis

  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] In recent decades, the synthesis, characterization, and potential applications of metal oxide bronzes have been studied, with their potential applications as catalysts and electrocatalysts. Among these, materials based on mixed oxide bronzes, with specific crystalline structures, of molybdenum and/or tungsten have garnered some attention for their application in catalytic processes for the valorization of natural gas fractions (especially ethane and propane) and/or biomass derivatives (especially glycerol, but also other components). This paper presents a review of the types of synthesized materials and the catalytic processes in which molybdenum and/or tungsten oxides bronzes have been studied. In addition, it will be also presented P-containing catalysts as well as other pseudo-crystalline materials, which can be also of interest in these types of reaction., Financial support from the Spanish Ministry of Science and Innovation, project PID2021-126235OB-C31, funded by MCIN/ AEI/https://doi.org/10.13039/501100011033 and FEDER funds; and project TED2021-130756B-C32, funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of CO2 presence on propane conversion routes over Cr-and Ga-doped PtCe/Al2O3 catalysts

  • Ballesteros-Plata, D.
  • Barroso-Martín, I.
  • Cecilia, J.A.
  • Rodriguez-Castellon, E.
  • Infantes-Molina, A.
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] A set of catalysts containing Cr-or Ga-doped Pt-CeO2 supported on alumina (PCA, Cr-PCA and Ga-PCA) were synthesized by incipient wetness impregnation and tested in propane conversion processes. The catalysts were studied in the propane conversion process with or without CO2 in the feed. In all cases, an enhancement in stability was found when CO2 was present in the reaction medium despite the lower catalytic activity. As well, all catalysts presented a higher propylene selectivity in the absence of CO2, indicating that the direct dehydrogenation of propane is the main reaction route. Moreover, CO2-assisted propane cracking to ethylene is favoured over propane reforming or direct cracking, given the minimal selectivity to other products like methane. With regards to the catalyst composition, Cr-PCA catalyst was the most active catalyst both in the absence and presence of CO2, due to the presence of weak acidity and coexistence of Cr3+ and Cr6+ redox species, as evidenced by XPS analysis. Ga-PCA catalyst was more selective to propylene, indicating that higher acidity of weak-to-medium nature along with formation of low coordinated Ga3+ species is beneficial for the CO2-ODH process. Raman, DTG and XPS analyses after reaction with CO2 showed that the deactivation of the catalysts was mainly due to carbon deposits of amorphous and graphitic nature on the surface of the catalysts., The authors thank the funding received from the Spanish Ministry of Science and Innovation, PID2021-126235OB-C31 and PID2021-126235OB-C32 funded by MCIN/AEI/10.13039/501100011033 and FEDER funds, and projects TED2021-130756B-C31 and TED2021-130756B-C32 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGener-ationEU/PRTR. IBM thanks Universidad de Ma <acute accent> laga for a postdoctoral grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing stability of Cu/ZnO catalysts in the CO2 hydrogenation to methanol by the addition of MoO3 and ReO3 promoters

  • Soriano-Rodríguez, José
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Gómez-Acosta, Daviel|||0000-0003-0010-4507
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Rodriguez-Castellon, Enrique
  • Infantes, Antonia
[EN] The catalytic hydrogenation of CO2 to methanol represents a promising route for carbon recycling and hydrogen storage. However, the stability of current catalysts remains one of the main technological challenges. In this work, we investigate the promotional effect of MoO3 and ReO3 on Cu/ZnO-based catalysts with metal loadings ranging from 0.06 to 3.5 wt%. Spectroscopic (XPS and in situ Raman) and kinetic studies reveal that the incorporation of ultra-low promoter amounts (0.06 wt%) enhances methanol productivity, whereas higher concentrations lead to partial blocking of the active copper sites. Rhenium promotes the stabilization of Cu+ species, while molybdenum establishes strong Cu-Mo interactions that modify the reducibility and surface composition of the catalyst. Remarkably, longterm stability tests (80 h, 240 ¿C, 20 bar and CO2/H2 = 3) demonstrate that Mo-promoted catalysts exhibit superior durability, reducing the deactivation constants by up to 82% compared to the un-promoted Cu/ZnO sample. This enhanced stability is attributed to the higher Cu-MoO3 interaction, enhanced Cu dispersion and high water affinity of Mo species, which trap water as Mo-OH bonds, preventing copper sintering under reaction conditions. These findings highlight the dual role of Re and Mo in tuning both activity and stability, emphasizing the crucial influence of Mo on the long-term performance of Cu-based catalysts for CO2 to methanol conversion., This research was funded by Ministerio de Ciencia, Innovacion y Universidades, grants number PID2021-1262350B-C31 and PID2021-1262350B-C32 (funded by MCIN/AEI/10.13039/501100011033 and FEDER) and Generalitat Valenciana (GVA), grant number CIAICO/2021/2138. This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) and Generalitad Valenciana (ref MFA/2022/016). D.G. thanks the Marie-Curie Postdoctoral (MSCA) Fellowship ID 101154019.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ethane ODH with CO2 over alumina-supported Fe-Ni-O mixed oxides catalysts

  • Franceschini, Gustavo N.
  • Schwaab, Marcio
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] The dehydrogenation of ethane in the presence of CO2 on alumina supported Fe-Ni-O catalysts was studied. The Fe/Ni ratio in catalysts strongly influences both the conversion of ethane and CO2 and the nature of reaction products. Iron species, linked to the hematite phase (¿-Fe3O4), favors ethane ODH but also the RWGS and dry reforming reactions (as parallel reactions). Nickel oxide has a high catalytic activity due to its capacity to break both C-H and C=C bonds in a non-selective way, facilitating the generation of CO. Characterization results show changes in catalysts during the reaction. The H2-TPR patterns of catalysts suggest a low interaction between the support and the iron particles, and a parallelism between the reducibility of iron particles and the conversion of reactants. In addition, all catalysts suffer important restructuration under reaction conditions, with iron oxide segregates to the catalyst surface together with a partial reduction of Fe3+ to Fe2+ (as determined by XPS). These changes could be confirmed by XRD, Raman, XPS and UV¿vis spectroscopy analyses. Temperature programmed surface reactions (TPSR), under different experimental conditions, indicate an important role of nickel in the bimetallic catalysts, avoiding severe reduction of the catalyst and stabilizing different types of iron oxide species with different selectivity to products., The authors would like to acknowledge the Ministerio de Ciencia e Innovacion of Spain (projects PID2021-126235OB-C31, TED2021-130756B-C32) funded by the MICIU/AEI/10.13039/501100011033 and FEDER/UE. The authors also acknowledge Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior - Brasil (CAPES/Print, UFRGS 2020) for the scholarship to G. do N. Franceschini.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photoelectrocatalytic application of vanadylporphyrin complexes directly extracted from oil

  • Moreno-Torralbo, Beatriz Maria
  • Vidal Moya, José Alejandro
  • López Nieto, José Manuel|||0000-0002-6960-3219
  • Myltykbayeva, Zh.K.
  • Sánchez-García, G.
  • Seysembekova, A.
  • Fernández-Domene, R.M.
  • Sánchez-Tovar, R.
  • Solsona, B.
[EN] Non-pure primary Vanadyl petroporphyrins extracted from oil, i.e., PVP(Oil), have been impregnated on SBA-15 or on SiO2. For comparison, synthetic vanadyl octaethylporphine, VP(S), was also impregnated on the same siliceous materials. The characterization result of unsupported porphyrins and the catalysts, by FTIR and DRUV-vis, confirm the successful incorporation of the corresponding vanadyl porphyrins. Electrochemical and photoelectrochemical properties of these catalysts have been evaluated through Electrochemical Impedance Spectroscopy (EIS), Mott-Schottky (MS) and voltammetry tests. According to the results, primary vanadyl porphyrin extracted from oil, PVP(Oil), show better photoelectrochemical response, regardless of the support used (either SiO2 or SBA15), than synthetic ones, VP(S). Additionally, this study reveals that PVP(Oil) can be used as photoelectrocatalysts for methyl red (MR) degradation (a common organic dye), showing almost a complete degradation of (MR) using PVP(Oil)-SBA15 catalyst after 3 h. Interestingly, an increase of more than 25% in the kinetic constant for the photoelectrochemical degradation of MR is shown for the PVP(Oil) in comparison to the VP(S)., The funding received for this study from the Spanish Ministry of Science and Innovation, Projects PID2021 126235OB-C31 and PID2021 126235OB-C33 funded by MCIN/AEI/10.13039/ 501100011033 and FEDER funds, and from the Ministry of Science and Higher Education of the Republic of Kazakhstan (Project: AP23486934) is acknowledged. This Special Issue is dedicated to honor the 10th International Symposium on Group V (IV and VI) Elements, a gathering of international researchers, industry, young researchers, and students to help shape the vision of the future for these elements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the selectivity to ethylene during ethane ODH over M1-based catalysts. A surface and electrochemical study

  • De Arriba-Mateos, Agustín
  • Sánchez, Ginebra
  • Sánchez-Tovar, Rita
  • Fernández-Domene, Ramón
  • Solsona, Benjamín
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] MoVO, MoVTeO and MoVTeNbO mixed oxides, prepared hydrothermally and heat-treated in N2 at 400, 500 or 600 degrees C, are active and selective catalysts in the oxidative dehydrogenation (ODH) of ethane, although their catalytic behaviour strongly depends on the composition and the activation temperature of the material. Thus, the selectivity to ethylene over samples heat-treated at 400 or 600 degrees C, decreases according to the following trend: MoVTeNb-600 > MoV-400 > MoVTe-600 > MoVTe-400 > MoVTeNb-400 >> MoV-600 (with catalysts heat -treated at 500 degrees C presenting an intermediate performance). This catalytic performance can be explained to a high extent by the presence of the M1 phase in the best catalysts. Interestingly, the temperature of formation and decomposition of the M1 phase strongly depends on the chemical composition of the catalysts, leading to different trends depending on the heat-treatment temperature. Not only the presence of the M1 phase determines the catalytic performance but also the V4+/V5+ ratio in the surface of catalysts. Additionally, a comprehensive brand-new electrochemical characterization of the catalysts has been carried out for MoV-based samples with M1 phase. Accordingly, the best catalytic behaviour in terms of selectivity to ethylene in the ethane ODH was observed in those materials presenting higher charge-transfer resistances at the interfacial active parts and n-type semiconductivity with few O-vacancies. Besides, lower current densities obtained in cyclic voltammetries (related to low electrochemical activity) has been associated with higher selectivity in the ODH reaction., The funding received from the Ministerio de Ciencia e Innovación of Spain, MINECO/FEDER (Projects: PID2021-126235OB-C31, PID2021-126235OB-C33, TED2021-130756B-C32 and TED2021-129555B-I00), for this study is acknowledged. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

V-Porphyrins Encapsulated or Supported on Siliceous Materials: Synthesis, Characterization, and Photoelectrochemical Properties

  • Myltykbayeva, Zhannur K.
  • Seysembekova, Anar
  • Moreno, Beatriz
  • Sánchez-Tovar, Rita
  • Fernández-Domene, Ramón M.
  • Vidal-Moya, Alejandro
  • Solsona Espriú, Benjamín
  • López Nieto, José Manuel
Metalloporphyrin-containing mesoporous materials, named VTPP@SBA, were prepared via a simple anchoring of vanadyl porphyrin (5,10,15,20-Tetraphenyl-21H,23H-porphine vanadium(IV) oxide) through a SBA-15-type mesoporous material. For comparison, vanadyl porphyrin was also impregnated on SiO (VTPP/SiO). The characterization results of catalysts by XRD, FTIR, DR-UV-vis, and EPR confirm the incorporation of vanadyl porphyrin within the mesoporous SBA-15. These catalysts have also been studied using electrochemical and photoelectrochemical methods. Impedance measurements confirmed that supporting the porphyrin in silica improved the electrical conductivity of samples. In fact, when using mesoporous silica, current densities associated with oxidation/reduction processes appreciably increased, implying an enhancement in charge transfer processes and, therefore, in electrochemical performance. All samples presented n-type semiconductivity and provided an interesting photoelectrocatalytic response upon illumination, especially silica-supported porphyrins. This is the first time that V-porphyrin-derived materials have been tested for photoelectrochemical applications, showing good potential for this use., This work was supported by the Ministry of Education and Science of the Republic of Kazakhstan (project No. ARP08856825-OT-20) and the Ministerio de Ciencia e Innovación of Spain (projects PID21-126235OB-C31 and PID21-126235OB-C33).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Predicting the catalytic performance of Nb-doped nickel oxide catalysts for the oxidative dehydrogenation of ethane by knowing their electrochemical properties

  • Abdelbaki, Yousra
  • Sánchez-Tovar, Rita
  • de Arriba, Agustín
  • García-González, Ester
  • Fernández-Domene, Ramón M.
  • Solsona, Benjamín
  • López Nieto, José Manuel
In the present article, a relationship between the catalytic performance in the oxidative dehydrogenation of ethane (ODHE) for Nb-doped NiO catalysts and their electrochemical properties has been proposed. To do so, highly stable and selective Nb-doped NiO catalysts for the ODHE to ethylene have been synthesized by optimizing synthesis parameters such as the amount of oxalic acid in the synthesis gel and the calcination temperature. These catalysts have been characterized by means of XRD, HRTEM, Raman and UV–vis diffuse reflectance spectroscopies, TPR and XPS. Moreover, Electrochemical Impedance Spectroscopy (EIS), capacitance measurements (Mott-Schottky analysis) and cyclic voltammetries studies were also carried out. Electrochemical characterization indicates changes in the type of semiconductivity: p-type for samples calcined at 350 °C and the sample prepared in the absence of oxalic acid and calcined at 500 °C, to n-type for samples prepared in the presence of oxalic acid in the synthesis gel and calcined at 500 °C. According to the obtained results, the most selective catalysts present a low Nb-incorporation on the NiO lattice with a large amount of tiny NbO nanoparticles covering NiO crystallites. This work presents, for the first time, a complete electrochemical characterization of Nb-doped NiO catalysts showing a correlation between electrochemical properties and catalytic performance., The authors would like to thank the the Ministerio de Ciencia e Innovación of Spain, MINECO/FEDER (Projects: TED2021-129555B-I00, PID2021-126235OB-C31, PID2021-126235OB-C33, TED2021-130756B-C32 and MFA/2022/016). Y.A. thanks the Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-oxidation-state Ru sites stabilized in carbon-doped RuO2 with low-temperature CO2 activation to yield methane

  • Tébar-Soler, Carmen
  • Martin-Diaconescu, Vlad
  • Simonelli, Laura
  • Missyul, Alexander
  • Pérez-Dieste, Virginia
  • Villar-García, Ignacio J.
  • Brubach, Jean-Blaise
  • Roy, Pascale
  • López Haro, Miguel
  • Calvino, José Juan
  • Concepción, Patricia
  • Corma, Avelino
The generation of methane fuel using surplus renewable energy with CO as the carbon source enables both the decarbonization and substitution of fossil fuel feedstocks. However, high temperatures are usually required for the efficient activation of CO. Here we present a solid catalyst synthesized using a mild, green hydrothermal synthesis that involves interstitial carbon doped into ruthenium oxide, which enables the stabilization of Ru cations in a low oxidation state and a ruthenium oxycarbonate phase to form. The catalyst shows an activity and selectivity for the conversion of CO into methane at lower temperatures than those of conventional catalysts, with an excellent long-term stability. Furthermore, this catalyst is able to operate under intermittent power supply conditions, which couples very well with electricity production systems based on renewable energies. The structure of the catalyst and the nature of the ruthenium species were acutely characterized by combining advanced imaging and spectroscopic tools at the macro and atomic scales, which highlighted the low-oxidation-state Ru sites (Ru, 0 < n < 4) as responsible for the high catalytic activity. This catalyst suggests alternative perspectives for materials design using interstitial dopants., We thank the support of C. Cerdá and M. D. Soriano in the catalyst preparation and testing. This research was funded by the Ministerio de Ciencia, Innovación y Universidades (grant nos. PID2021-1262350B-C31, PID2020-113006-RB-I00, PID2019-110018GA-I00 and MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (grant no. CIAICO/2021/2138), the Department of Economy, Knowledge, Business and the University of the Regional Government of Andalusia (project reference FEDER-UCA18-107139). This study forms part of the Advanced Materials programme and was supported by MCIN with funding from the European Union Next Generation (EU PRTR-C17.11) and by Generalitad Valenciana (ref. MFA/2022/016). C.T.-S. acknowledges the Polytechnical University of Valencia for the economic support through an FPI scholarship associated with the PAID programme ‘Programa de Ayudas de Investigación y Desarrollo’. XAS, XPS and XRD experiments were performed at the ALBA Synchrotron with the collaboration of ALBA staff. Infrared experiments were performed at the SOLEIL Synchrotron with the collaboration of SOLEIL staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancement of ethylene production by alkali metal doping of MoVSb mixed oxide catalyst for ethane oxidative dehydrogenation

  • Ivars-Barceló, Francisco
  • Solsona, Benjamín
  • Asedegbega-Nieto, Esther
  • López Nieto, José Manuel
Hydrothermally prepared Mo-V-Sb mixed oxides doped with alkali metal cations (Li, Na, K, Rb, or Cs) show a significantly improved catalytic behavior in the oxidative dehydrogenation of ethane (ODH) compared to conventional alkali metal-free MoVSbO catalysts. Initial selectivity to ethylene above 95 % was held up to 20 % of ethane conversion for all alkali metal promoted MoVSbO catalysts, as well as lower ethylene overoxidation at higher ethane conversion, with differences depending on the alkali metal employed. Thus, from Li to K, the enhanced catalytic performance follows a bottom-up trend as increasing the size of the cation. An intermediate behavior is observed though for the catalyst doped with Cs cations, with the highest atomic radius. The K-doped MoVSbO catalyst is the least prone to both ethane total oxidation and ethylene overoxidation, which enables up to 90 % selectivity to ethylene at ethane conversion higher than 65 %., This work was supported by the Ministerio de Ciencia e Innovación of Spain (projects PID21-126235OB-C31 and PID21-126235OB-C33). F. Ivars-Barceló also acknowledges the Ministerio de Ciencia e Innovación of Spain by the support from the “Ramón y Cajal” excellence grant (Ref.: RYC2020-029470-I/AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the selectivity to ethylene during ethane ODH over M1-based catalysts. A surface and electrochemical study

  • de Arriba, Agustín
  • Sánchez, Ginebra
  • Sánchez-Tovar, Rita
  • Concepción, Patricia
  • Fernández-Domene, Ramón
  • Solsona, Benjamín
  • López Nieto, José Manuel
MoVO, MoVTeO and MoVTeNbO mixed oxides, prepared hydrothermally and heat-treated in N at 400, 500 or 600 °C, are active and selective catalysts in the oxidative dehydrogenation (ODH) of ethane, although their catalytic behaviour strongly depends on the composition and the activation temperature of the material. Thus, the selectivity to ethylene over samples heat-treated at 400 or 600 °C, decreases according to the following trend: MoVTeNb-600 > MoV-400 > MoVTe-600 > MoVTe-400 > MoVTeNb-400 >> MoV-600 (with catalysts heat-treated at 500 °C presenting an intermediate performance). This catalytic performance can be explained to a high extent by the presence of the M1 phase in the best catalysts. Interestingly, the temperature of formation and decomposition of the M1 phase strongly depends on the chemical composition of the catalysts, leading to different trends depending on the heat-treatment temperature. Not only the presence of the M1 phase determines the catalytic performance but also the V/V ratio in the surface of catalysts. Additionally, a comprehensive brand-new electrochemical characterization of the catalysts has been carried out for MoV-based samples with M1 phase. Accordingly, the best catalytic behaviour in terms of selectivity to ethylene in the ethane ODH was observed in those materials presenting higher charge-transfer resistances at the interfacial active parts and n-type semiconductivity with few O-vacancies. Besides, lower current densities obtained in cyclic voltammetries (related to low electrochemical activity) has been associated with higher selectivity in the ODH reaction., The funding received from the Ministerio de Ciencia e Innovación of Spain, MINECO/FEDER (Projects: PID2021-126235OB-C31, PID2021-126235OB-C33, TED2021-130756B-C32 and TED2021-129555B-I00), for this study is acknowledged. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-temperature hydroformylation of ethylene by phosphorous stabilized Rh sites in a one-pot synthesized Rh-(O)-P-MFI zeolite

  • Zhao, Minjie
  • Li, Chengeng
  • Gómez, Daviel
  • Gonell, Francisco
  • Diaconescu, Vlad Martin
  • Simonelli, Laura
  • López Haro, Miguel
  • Calvino, José Juan
  • Meira, Debora M.
  • Concepción, Patricia
  • Corma, Avelino
Zeolites containing Rh single sites stabilized by phosphorous were prepared through a one-pot synthesis method and are shown to have superior activity and selectivity for ethylene hydroformylation at low temperature (50 °C). Catalytic activity is ascribed to confined RhO clusters in the zeolite which evolve under reaction conditions into single Rh sites. These Rh sites are effectively stabilized in a Rh-(O)-P structure by using tetraethylphosphonium hydroxide as a template, which generates in situ phosphate species after H activation. In contrast to RhO, confined Rh clusters appear less active in propanal production and ultimately transform into Rh(I)(CO) under similar reaction conditions. As a result, we show that it is possible to reduce the temperature of ethylene hydroformylation with a solid catalyst down to 50 °C, with good activity and high selectivity, by controlling the electronic and morphological properties of Rh species and the reaction conditions., P.C. thanks the Ministerio de Ciencia, Innovación y Universidades, grant number PID2021-1262350B-C31, and Generalitat Valenciana (GVA), grant number CIAICO/2021/2138. P.C. and D.G. thank the Advanced Materials Programme supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) (TED2021-130756B-C32) and by Generalitad Valenciana (ref MFA/2022/016). M.Z. acknowledges the China Scholarship Council (CSC) for Ph.D. fellowship (CSC NO. 202006440003). XAS experiments were performed at the ALBA Synchrotron (BL-22 CLÆSS) with the collaboration of ALBA staff. XANES of Rh-(O)-P-MFI samples were analyzed at the Advanced Photon Source, an Office of Science User Facility operated by Argonne National Laboratory for the U.S. Department of Energy (DOE) Office of Science. The U.S. DOE supported it under Contract No. DE-AC02-06CH11357, and the Canadian Light Source and its funding partners. HR-HAADF-STEM measurements were performed at DME-UCA at Cadiz University. M.L.H. and J.J.C. thank the financial support from the Department of Economy, Knowledge, Business and the University of the Regional Government of Andalusia, Project reference FEDER-UCA18-107139., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectroscopic insights into the role of CO2 on the nature of Cr species in a CrOX/Al2O3 catalysts during ethane dehydrogenation with CO2

  • Franceschini, Gustavo do N.
  • Concepción, Patricia
  • Schwaab, Marcio
  • do Carmo Rangel, Maria
  • Martínez Triguero, Joaquín
  • López Nieto, José Manuel
The dehydrogenation of ethane with CO was studied on CrOx/AlO catalysts (8 wt% of CrO) in the 600–675 °C temperature range. The role of CO was determined by comparison with catalytic and spectroscopic data of ethane dehydrogenation without CO. Characterization of fresh catalyst suggested an intimate interaction of Cr and support. Moreover, in situ Raman spectroscopic analysis combined with XPS studies done on reaction exposed samples indicated changes in both the nature of active Cr species and the reaction mechanism depending on the reaction conditions (i.e., presence/absence of CO, and the reaction temperature). At lower temperatures (600–625 °C), CO promotes the re-oxidation of Cr to Cr favoring the oxidative dehydrogenation (ODH) route. While at higher temperatures (650–675 °C), the reaction occurs mainly via a catalytic dehydrogenation mechanism, as CO is no longer capable of re-oxidizing Cr to Cr, with CO inhibiting partially the formation of coke., The authors would like to acknowledge the Ministerio de Ciencia e Innovación of Spain (projects PID2021–126235OB-C31, TED2021–130756B-C32 and the Generalitat Valenciana (project MFA/2022/016) for the financial support. The authors also acknowledge Coordenação de Aperfeiçoamento de Pessoal de Nivel Superior – Brasil (CAPES/Print, UFRGS 2020) for the scholarship to G. do N. Franceschini.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Upgrading the reflux method as novel route for competitive catalysts in alkane selective oxidation

  • Massó Ramírez, A.
  • de Arriba, Agustín
  • Ivars-Barceló, Francisco
  • Ykrelef, A.
  • Solsona, Benjamín
  • López Nieto, José Manuel
In the present article we show that, although the reflux method is not common for the synthesis of multicomponent MoVTeNbO catalysts, an optimized reflux synthesis of metallic precursors leads to efficient materials for the oxidative dehydrogenation of ethane and the selective oxidation of propane into acrylic acid, with the results at the same level as those of the best catalysts reported in the literature to date. It has been demonstrated that the reflux temperature is of paramount importance to achieve active and selective catalysts. Thus, the incorporation of vanadium and niobium to a polyoxometalate in the catalyst precursors is favored by refluxing at 110 °C, promoting the formation of the desired orthorhombic M1 phase. Additionally, the incorporation in the synthesis gel of cations such as ammonium or methylammonium provokes a further improvement of the catalytic performance whenever the activation procedure is carefully controlled., The authors gratefully acknowledge the financial support by the Ministerio de Ciencia e Innovación of Spain, MINECO/FEDER (Projects: PID2021-126235OB-C31, PID2021-126235OB-C33, TED2021-130756B-C32 and TED2021-129555B-I00). F. Ivars-Barceló gratefully acknowledges the support from “Ramón y Cajal” excellence program for recruitment (Ref.: RYC2020-029470-I/AEI/10.13039/501100011033).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interdependence Between the Extent of Ga Promotion, the Nature of Active Sites, and the Reaction Mechanism Over Cu Catalysts for CO2 Hydrogenation to Methanol

  • Gómez, Daviel
  • Vergara, Tomás
  • Ortega, Maray
  • Martin-Diaconescu, Vlad
  • Simonelli, Laura
  • Concepción, Patricia
  • Jimenez, Romel
  • Karelovic, Alejandro
The effect of low Ga contents on Cu/SiO2 catalysts was studied for the CO2 hydrogenation reaction. Catalysts were synthesized with different Ga2O3 contents by incipient wetness impregnation, resulting in similar average Cu nanoparticle sizes, between 6.0 and 6.6 nm. Characterization techniques such as IR-CO, quasi in situ XPS and in situ XAS, kinetic tests, in situ/operando diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and steady state isotopic transient kinetic analysis (SSITKA) were combined to disclose the promoting effect of Ga and its relationship with the nature of active sites and the reaction mechanism. It was found that a Cu+ site was formed at the Cu¿Ga2O3 interface with the addition of a promoter, and it was demonstrated that this site allows the direct dissociation of CO2. The intrinsic rate of methanol formation on promoted catalysts increases by approximately 1 order of magnitude without significantly changing the intrinsic rate of CO formation. The same was observed for the apparent activation energies, which were constant for CO and decreasing for methanol, further depicting a change in the nature of active sites for the latter. On the unpromoted Cu catalyst, methanol is formed mainly on Cu0 through the formate pathway, while over Cu¿Ga2O3 the main active site shifts to the Cu+ species generated at the interface, which moreover favored the reverse water¿gas shift followed by the hydrogenation of carbonyl intermediates (RWGS + CO¿Hydro). SSITKA experiments confirmed that Ga contributed positively to the formation and stabilization of additional active sites where methanol is formed; the amount of these sites increased with the loading of promoter. This was reflected as an increase in the measured number of intermediates that lead to methanol, while the coverage of intermediates that form CO remained constant, irrespective of Ga loading. It was further verified that the intrinsic reactivity (TOFITK) of the Cu+ site at the Cu¿Ga2O3 interface is lower than that of the Cu monometallic catalyst, but this is balanced by the contribution of a greater number of these active sites. On the other hand, the CO formation rate was not modified. Therefore, it is concluded that Ga does not change the nature of the active sites involved in the CO formation. By combining state of the art characterization techniques, rational kinetic measurements, operando spectroscopy and isotopic labeling, this work clearly stablishes a relationship between Ga2O3 promotion, nature of active sites, and reaction mechanism over Cu catalyst., The authors thank the government of Chile for the financing assigned through the FONDECYT grant 1190178 from the National Agency for Research and Development (ANID). D.G. thanks ANID-Chile, Beca de Doc.Nac./2019-21190800 and the Project UCO 1866 of the Universidad de Concepcion. P.C. aknowledges the Ministerio de Ciencia, Innovación y Universidades, grant number PID2021-1262350B-C31, and Generalitat Valenciana (GVA), grant number CIAICO/2021/2138. This study forms a part of the Advanced Materials programme and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) (TED2021-130756B-C32) and by Generalitad Valenciana (ref MFA/2022/016). These experiments were performed at BL22-CLAESS beamline at ALBA Synchrotron with the collaboration of ALBA staff and the experimental team: Beatriz M. Moreno Torrealbo, Minjie Zhao, and Jose Soriano Rodríguez. T.V. acknowledges the financial support from the Research Grants─Doctoral Programs in Germany (57645448), awarded by the Deutsche Akademische Austauschdienst (DAAD), Government of Germany. Saint-Gobain Norpro is acknowledged for kindly providing the SiO2 support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stabilization of the Active Ruthenium Oxycarbonate Phase for Low-Temperature CO2 Methanation

  • Tébar-Soler, Carmen
  • Diaconescu, Vlad Martin
  • Simonelli, Laura
  • Missyul, Alexander
  • Pérez-Dieste, Virginia
  • Villar-Garcia, Ignacio
  • Gómez, Daviel
  • Brubach, Jean-Blaise
  • Roy, Pascale
  • Corma, Avelino
  • Concepción, Patricia
Interstitial carbon-doped RuO catalyst with the newly reported ruthenium oxycarbonate phase is a key component for low-temperature CO methanation. However, a crucial factor is the stability of interstitial carbon atoms, which can cause catalyst deactivation when removed during the reaction. In this work, the stabilization mechanism of the ruthenium oxycarbonate active phase under reaction conditions is studied by combining advanced operando spectroscopic tools with catalytic studies. Three sequential processes: carbon diffusion, metal oxide reduction, and decomposition of the oxycarbonate phase and their influence by the reaction conditions, are discussed. We present how the reaction variables and catalyst composition can promote carbon diffusion, stabilizing the oxycarbonate catalytically active phase under steady-state reaction conditions and maintaining catalyst activity and stability over long operation times. In addition, insights into the reaction mechanism and a detailed analysis of the catalyst composition that identifies an adequate balance between the two phases, i.e., ruthenium oxycarbonate and ruthenium metal, are provided to ensure an optimum catalytic behavior., This research was funded by Ministerio de Ciencia, Innovación y Universidades, grant number PID2021-1262350B–C31, and Generalitat Valenciana (GVA), grant number CIAICO/2021/2138. This study formed part of the Advanced Materials programme and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) and Generalitad Valenciana (ref MFA/2022/016 and TED2021-130756B–C32). C.T.S acknowledges the Polytechnical University of Valencia for the economic support through the grant of an FPI scholarship associated with the PAID programme “Programa de Ayudas de Investigación y Desarrollo.” XAS, XPS, and XRD experiments were performed at the ALBA Synchrotron with the collaboration of ALBA staff. IR experiments were performed at the SOLEIL Synchrotron with the collaboration of the SOLEIL staff. This research used resources of the Advanced Photon Source, a U.S. Department of Energy (DOE) Office of Science user facility operated for the DOE Office of Science by the Argonne National Laboratory under Contract No.DE-AC02-06CH11357., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the selective transformation of ethanol over Mg- and/or La-containing mixed oxides catalysts

  • Ballesteros Plata, D.
  • Balestra, G.
  • Cecilia, J.A.
  • Barroso Martín, I.
  • Infantes-Molina, A.
  • Tabanelli, T.
  • Cavani, F.
  • López Nieto, José Manuel
  • Montaña, M.
  • Rodríguez Castellón, E.
MgO-LaO catalysts with different Mg/La molar ratio were synthesized by a precipitation method and a subsequent calcination and then characterized by x-ray diffraction, N adsorption-desorption isotherms (at −196 °C), CO- and NH-thermoprogrammed desorption and x-ray photoelectronic spectroscopy. The coexistence of acid and basic sites promoted the selective transformation of ethanol into valuable products. Thus, MgO catalyst promoted the Guerbet reaction obtaining n-butanol as product while the incorporation of LaO in the catalytic system improved the ethanol conversion notably, obtaining ethylene as the main product due to a dehydration reaction. The highest ethylene yield was obtained for the catalyst with a Mg/La molar ratio of 1., The funding received for this study from the Spanish Ministry of Science and Innovation, PID2021–126235OB-C31 and PID2021–126235OB-C32 funded by MCIN/ AEI/10.13039/501100011033 and FEDER funds, and projects TED2021–130756B-C31 and TED2021–130756B-C32 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” by the European Union NextGenerationEU/PRTR, is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoelectrocatalytic application of vanadylporphyrin complexes directly extracted from oil

  • Moreno-Torralbo, B.M.
  • Myltykbayeva, Z.K
  • Sánchez-García, G.
  • Seysembekova, A.
  • Fernández-Domene, R.M.
  • Vidal-Moya, Alejandro
  • Sánchez-Tovar, R.
  • Solsona, Benjamín
  • López Nieto, José Manuel
Non-pure primary Vanadyl petroporphyrins extracted from oil, i.e., PVP(Oil), have been impregnated on SBA-15 or on SiO. For comparison, synthetic vanadyl octaethylporphine, VP(S), was also impregnated on the same siliceous materials. The characterization result of unsupported porphyrins and the catalysts, by FTIR and DR-UV–vis, confirm the successful incorporation of the corresponding vanadyl porphyrins. Electrochemical and photoelectrochemical properties of these catalysts have been evaluated through Electrochemical Impedance Spectroscopy (EIS), Mott-Schottky (MS) and voltammetry tests. According to the results, primary vanadyl porphyrin extracted from oil, PVP(Oil), show better photoelectrochemical response, regardless of the support used (either SiO or SBA15), than synthetic ones, VP(S). Additionally, this study reveals that PVP(Oil) can be used as photoelectrocatalysts for methyl red (MR) degradation (a common organic dye), showing almost a complete degradation of (MR) using PVP(Oil)-SBA15 catalyst after 3 h. Interestingly, an increase of more than 25% in the kinetic constant for the photoelectrochemical degradation of MR is shown for the PVP(Oil) in comparison to the VP(S)., The funding received for this study from the Spanish Ministry of Science and Innovation, Projects PID2021–126235OB-C31 and PID2021–126235OB-C33 funded by MCIN/AEI/10.13039/501100011033 and FEDER funds, and from the Ministry of Science and Higher Education of the Republic of Kazakhstan (Project: AP23486934) is acknowledged. This Special Issue is dedicated to honor the 10th International Symposium on Group V (IV and VI) Elements, a gathering of international researchers, industry, young researchers, and students to help shape the vision of the future for these elements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

N2O Assisted Ethane Transformation into Ethylene Using NiO−CeO2−ZrO2 Catalysts

  • Sánchez, Ginebra
  • Dejoz, Ana M.
  • Fernández-Domene, Ramón
  • Barroso Martín, I.
  • Ballesteros Plata, D.
  • Infantes-Molina, A.
  • Cecilia, Juan A.
  • Rodríguez-Castellón, Enrique
  • López Nieto, José Manuel
  • Sánchez-Tovar, Rita
  • Solsona, Benjamín
NiO−CeO and NiO−CeO−ZrO catalysts have been synthesized, electrochemically characterized (Mott-Schottky (MS) measurements and Electrochemical Impedance Spectroscopy), physicochemically characterized (by N adsorption, XRD, Transmission Electron Microscopy and XPS) and tested in the NO assisted ethane oxydehydrogenation. The use of low Zr-loadings (Zr/Ce=0.1 at. ratio) has led to the optimal results in the ethylene production, improving those obtained by the Zr-free NiO−CeO catalyst. However, high Zr-loadings have meant a decrease in the olefin production. The catalytic results obtained have been explained considering the amount of oxygen vacancies, the crystalline phases formed and, especially, the nature of the surface Ni species. Importantly, the use of NO as an oxidizing agent leads to a remarkable improvement in the selectivity to the olefin compared to that obtained employing molecular O. Then, for a given ethane conversion the selectivity to ethylene is ca. 15 points higher using NO than using O. Another additional positive aspect of this NiO−CeO−ZrO catalyst is its high catalytic stability., The authors would like to acknowledge the Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación through the projects PID2021-126235OB-C31, PID2021-126235OB-C32 and PID2021–126235OB-C33 (funded by MCIN/AEI/10.13039/501100011033 and FEDER funds), and TED2021-129555B-I00/AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR. The authors also thank the Generalitat Valenciana for CIAICO/2021/094 and CIGRIS/2022/198.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic oxidation of volatile organic compounds with Mn-zeolites

  • Toloza-Blanco, L.
  • Gora-Marek, K.
  • Tarach, K.A.
  • Sobalska, J.
  • Martínez Triguero, Joaquín
  • Plá-Hernández, A.
  • Palomares Gimeno, Antonio Eduardo
Mn-catalysts supported on zeolites are active materials for oxidising volatile organic compounds, but the catalysts' activity and selectivity depend on the support's characteristics. In this work, we study the performance of different Mn catalysts supported on zeolites with different Si/Al ratios and topology in the ethanol oxidation reaction. The results show a correlation between the mechanism of the reaction and the presence or absence of acid sites on the zeolite surface, which is based on its aluminium content. It is observed that the presence of Brønsted acid sites catalyses ethanol dehydration to ethylene that is oxidised to CO at higher temperatures. Without protonic acid sites, ethanol is primarily oxidised to acetaldehyde and subsequently oxidised to CO, achieving a complete oxidation at lower temperatures. The acidity also influences the nature of the metallic active sites, forming Mn-oxo species with higher oxidation state in the catalyst with lower aluminium content. These species are more active than those formed in the catalyst enriched with Brønsted acid sites. Thus, zeolites with higher Si/Al ratios are more adequate for supporting Mn catalysts in the ethanol oxidation reaction. The results show that low acidity is a decisive factor in designing active catalysts for this reaction, while zeolite topology or catalyst surface area are of secondary importance., The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation (CEX2021–001230-S grant funded by MCIN/AEI/10.13039/501100011033; TED2021–131715B-I00 grant funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe” by the European Union NextGeneration EU/PRTR and PID2021–126235OB-C31). Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. L. Toloza thanks Fundación Carolina for the pre-doctoral grant, call 2019-2020 Universidad Central de Colombia and Universitat Politècnica de València agreement. A. Plá-Hernández thanks Spanish Ministry of Science and Innovation for the pre-doctoral grant PRE2019–088100, associated with the project RTI2018–101784-B-I00. FT-IR and UV–vis in situ and operando studies were financed by Grant No. 2021/41/B/ST4/00048 from the National Science Centre, Poland.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Copper(I) Oxo Species in Cu/ZnO Catalysts and Its Role in the Methanol Synthesis from CO2 Hydrogenation

  • Soriano, José
  • Fo, Y.
  • Gómez, Daviel
  • López Nieto, José Manuel
  • Roy, Abhijit
  • Manzorro, Ramón
  • Arenal, Raúl
  • Calvino, Jose J.
  • Song, Weiyu
This study reveals the presence of low-atomicity copper(I) oxo clusters strongly anchored to ZnO in commercial-type Cu/ZnO catalysts that, coexisting with metallic copper nanoparticles, play a critical role in CO2 hydrogenation. Their detection is challenging because metallic copper nanoparticles dominate the catalyst surface and these clusters appear in low amounts. Nevertheless, definitive evidence of their existence comes from the combination of in situ Raman spectroscopy, temperature-programmed CO surface reaction (TPSR-CO), time-resolved kinetic studies, and advance microscopy studies (STEM-XEDS and STEM-EELS). Catalytic studies combined with density functional theory (DFT) calculations demonstrate its critical role in methanol production and their size-dependent contribution to the total activity compared to traditional Cu-ZnO interfacial sites. According to DFT studies, CO2 adsorption is significantly more favorable on small Cu14O7 and Cu32O16 clusters than on extended Cu2O (111) (110) facets, metallic copper, or conventional metal-support interfacial sites. Moreover, the stabilization of carboxyl rather than formate-like intermediates follows a similar trend than the methanol production, being preferential on small Cu14O7 and Cu32O16 clusters, underlying a carboxyl-type intermediate path in methanol production., This research was funded by Ministerio de Ciencia, Innovación y Universidades, grant numbers PID2021-1262350B-C31, PID2020- 113006-RB-I00, and PID2023-151080NB-I00; CEX2023-001286- S funded by MCIN/AEI/10.13039/501100011033; and the Government of Aragon (DGA) through the project E13_23R and Generalitat Valenciana (GVA), grant number CIAICO/2021/2138. This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.11) and Generalitat Valenciana (TED2021-130756B-C32and ref MFA/2022/016). Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. D.G. thanks the Marie-Curie Postdoctoral (MSCA) Fellowship ID 101154019., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286- S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001230-S)., Peer reviewed