Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic activation of N2O on promoted NiO based materials: Valorization by oxidative dehydrogenation of ethane

  • Sánchez-García, G.
  • Pérez-Calvo, A.
  • Sánchez-Tovar, R.
  • Dejoz, A.M.
  • Solsona, B.
  • Moreno-Torralbo, Beatriz Maria
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] N2O-assisted Oxidative Dehydrogenation (ODH) of ethane is an interesting way of simultaneously obtaining a highly valuable raw material (ethylene) and the functionalization of a greenhouse gas (N2O). Unfortunately, over most of the catalytic systems, this reaction presents two main drawbacks: i) high yields to ethylene have hardly been reported; and ii) the catalytic activity highly decreases when replacing molecular oxygen by N2O. In the present article, it will be shown that with promoted NiO catalysts, and using N2O, high activity, comparable with that of conventional O2-assisted ODH of ethane, is achieved. Furthermore, the use of the appropriate dopant, such as niobium, allows high ethylene yields (40 %), with a selectivity to ethylene of 72 % at 55 % ethane conversion. Overall, the catalytic results obtained indicate that the presence/absence and the nature of the promoter determines the catalytic performance of NiO based catalysts and the selectivity to ethylene can be explained on the basis of the electrochemical properties of the catalysts, correlating with parameters such as the density of acceptor defects (cationic vacancies) and the charge-transfer resistance at the interfacial active sites of the catalysts. Interestingly, the most selective catalyst (i.e., Nb-doped NiO) is highly robust as it presents stable catalytic performance after 24 h online and Ni2+ species are not reduced to Ni0 even working at high temperatures in N2O-free conditions., The funding received for this study from the Spanish Ministry of Science and Innovation, projects PID2021-126235OB-C31 and PID2021-126235OB-C33 (funded by MCIN/AEI/10.13039/501100011033 and FEDER funds) and projects TED2021-130756B-C31 and TED2021-129555B-I00 (funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR) , is acknowledged. BMT, PC, and JMLN also thank CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033. G. Sanchez-Garcia is also grateful to the Generalitat Valenciana (CIACIF/2021/010) and A. Perez-Calvo to Ministerio de Ciencia, Innovacion y Universidades (FPU23/02557) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Green biomediated synthesis of anodized WO3 nanocatalysts using Melia azedarach leaves extract for the energetic transition: Solar hydrogen and Li-ion batteries

  • Fernández-Domene, Ramón M.
  • Solsona, Benjamín
  • Erans, María
  • Sánchez-Tovar, Rita
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
[EN] This study reports the bio-mediated synthesis of tungsten trioxide nanostructures from aqueous extracts of Melia azedarach (L.) dry leaves. The synthesis was carried out by electrochemical anodization of tungsten foils in the presence of different volume percentages of leaves extracts. These nanostructures were afterwards completely characterized by Field-Emission Scanning Electron Microscopy (FESEM), X-Ray Diffraction (XRD), High- Resolution Transmission Electron Microscopy (HR-TEM), impedance measurements, linear sweep voltammetry in the presence of simulated solar light and UV-Vis spectroscopy. Finally, these nanoelectrodes were used as (photo)electrocatalysts in the photoelectrochemical water splitting process to obtain green hydrogen and as anodes in Li-ion rechargeable batteries. Nanostructures fabricated with 5% M. azedarach leaves extract provided the best (photo)electrocatalytic behavior for both applications, since in that biogenic electrolyte, thin nanorods arranged in very porous and spongy layers were formed. Therefore, the significant increase in specific surface area found for nanostructures fabricated following this green route, in comparison with the blank sample (i.e., nanostructure formed following a non-green route), was essential to enhance their performance as promising efficient (photo)electrocatalysts., M. Erans is grateful for Grant RYC2021-031428-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. Authors would also like to acknowledge the Generalitat Valenciana for CIAICO/2021/094, CIGRIS/2022/198 and CIGE/2022/166. Authors also would like to acknowledge the Ministerio de Ciencia e Innovacion-Agencia Estatal de Investigacion through the projects PID2021-126235OB-C33 MCIN/AEI/10.13039/501100011033/FEDER Una manera de hacer Europa, UE and TED2021-129555B-I00/AEI/10.13039/501100011033/Union Europea NextGenerationEU/PRTR. Thanks to SCSIE-UV for assistance in characterization of materials.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient Anodized WO3 Photoanode for Photoelectrocatalytic Applications: Hydrogen Production and Reduction of CO2

  • Pérez-Calvo, Alberto
  • Sánchez-García, Ginebra
  • Roselló-Márquez, Gemma
  • Fernández-Domene, Ramón M.
  • Sánchez-Tovar, Rita
  • Solsona, Benjamín
  • Blasco-Tamarit, E.|||0000-0001-7314-082X
[EN] In this work, a nanostructured WO3 photoanode has been used for photoelectrochemical H-2 production and CO2 reduction. In particular, we provide a novel method to synthesize tungsten oxide catalysts by anodization of tungsten using an ionic liquid, [EMIN][BF4], as electrolyte in hydrodynamic conditions. We found that the use of appropriate hydrodynamic conditions (200-400 rpm) provides larger and more homogenous nanostructures with higher surface area. All this leads to better morphological and electrochemical properties. An excessive rotation during the synthesis (600 rpm) breaks the uniformity of the morphology of the nanostructures, thus hindering the photoelectrochemical performance. This way, the use of an optimized WO3 photoanode has shown excellent potential for photoelectrocatalytic water splitting. Moreover, these nanostructures also present good performance in the photoelectrocatalytic CO2 reduction, leading to the main formation of acetic acid, formic acid, and methanol. In fact, after only 6 h in continuous mode, a remarkable formic acid concentration of 190 mu mol/L at 6 h has been obtained. Moreover, we have illustrated the great importance of the anode during the PEC reaction, significantly influencing the concentration of the obtained products owing to the electrons and protons transferred from the oxygen evolution reaction (OER)., This research was funded by the Ministerio de Ciencia e Innovacion-Agencia Estatal de Investigacion through the projects PID2021-126235OB-C33 MCIN/AEI/10.13039/501100011033/FEDER Una manera de hacer Europa, UE P and TED2021-129555B-I00/AEI/10.13039/501100011033/Union Europea NextGenerationEU/PRTR and by the European Union NextGenerationEU/PRTR. A. Perez-Calvo is also grateful to Ministerio de Ciencia, Innovacion y Universidades (FPU23/02557), and G. Sanchez-Garcia to the Generalitat Valenciana (CIACIF/2021/010).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Predicting the catalytic performance of Nb-doped nickel oxide catalysts for the oxidative dehydrogenation of ethane by knowing their electrochemical properties

  • Abdelbaki, Yousra
  • Sánchez-Tovar, Rita
  • de Arriba, Agustín
  • García-González, Ester
  • Fernández-Domene, Ramón M.
  • Solsona, Benjamín
  • López Nieto, José Manuel
In the present article, a relationship between the catalytic performance in the oxidative dehydrogenation of ethane (ODHE) for Nb-doped NiO catalysts and their electrochemical properties has been proposed. To do so, highly stable and selective Nb-doped NiO catalysts for the ODHE to ethylene have been synthesized by optimizing synthesis parameters such as the amount of oxalic acid in the synthesis gel and the calcination temperature. These catalysts have been characterized by means of XRD, HRTEM, Raman and UV–vis diffuse reflectance spectroscopies, TPR and XPS. Moreover, Electrochemical Impedance Spectroscopy (EIS), capacitance measurements (Mott-Schottky analysis) and cyclic voltammetries studies were also carried out. Electrochemical characterization indicates changes in the type of semiconductivity: p-type for samples calcined at 350 °C and the sample prepared in the absence of oxalic acid and calcined at 500 °C, to n-type for samples prepared in the presence of oxalic acid in the synthesis gel and calcined at 500 °C. According to the obtained results, the most selective catalysts present a low Nb-incorporation on the NiO lattice with a large amount of tiny NbO nanoparticles covering NiO crystallites. This work presents, for the first time, a complete electrochemical characterization of Nb-doped NiO catalysts showing a correlation between electrochemical properties and catalytic performance., The authors would like to thank the the Ministerio de Ciencia e Innovación of Spain, MINECO/FEDER (Projects: TED2021-129555B-I00, PID2021-126235OB-C31, PID2021-126235OB-C33, TED2021-130756B-C32 and MFA/2022/016). Y.A. thanks the Ministry of Higher Education and Scientific Research of Algeria for the National Exceptional Program for the fellowships. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the selectivity to ethylene during ethane ODH over M1-based catalysts. A surface and electrochemical study

  • de Arriba, Agustín
  • Sánchez, Ginebra
  • Sánchez-Tovar, Rita
  • Concepción, Patricia
  • Fernández-Domene, Ramón
  • Solsona, Benjamín
  • López Nieto, José Manuel
MoVO, MoVTeO and MoVTeNbO mixed oxides, prepared hydrothermally and heat-treated in N at 400, 500 or 600 °C, are active and selective catalysts in the oxidative dehydrogenation (ODH) of ethane, although their catalytic behaviour strongly depends on the composition and the activation temperature of the material. Thus, the selectivity to ethylene over samples heat-treated at 400 or 600 °C, decreases according to the following trend: MoVTeNb-600 > MoV-400 > MoVTe-600 > MoVTe-400 > MoVTeNb-400 >> MoV-600 (with catalysts heat-treated at 500 °C presenting an intermediate performance). This catalytic performance can be explained to a high extent by the presence of the M1 phase in the best catalysts. Interestingly, the temperature of formation and decomposition of the M1 phase strongly depends on the chemical composition of the catalysts, leading to different trends depending on the heat-treatment temperature. Not only the presence of the M1 phase determines the catalytic performance but also the V/V ratio in the surface of catalysts. Additionally, a comprehensive brand-new electrochemical characterization of the catalysts has been carried out for MoV-based samples with M1 phase. Accordingly, the best catalytic behaviour in terms of selectivity to ethylene in the ethane ODH was observed in those materials presenting higher charge-transfer resistances at the interfacial active parts and n-type semiconductivity with few O-vacancies. Besides, lower current densities obtained in cyclic voltammetries (related to low electrochemical activity) has been associated with higher selectivity in the ODH reaction., The funding received from the Ministerio de Ciencia e Innovación of Spain, MINECO/FEDER (Projects: PID2021-126235OB-C31, PID2021-126235OB-C33, TED2021-130756B-C32 and TED2021-129555B-I00), for this study is acknowledged. A.A. acknowledges Severo Ochoa Excellence Program for his fellowship (BES-2017-080329)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic transformation of levulinic acid into γ-valerolactone with photoelectrocatalytic hydrogen using a novel one-unit set-up: Optimization of the preparation procedure of ruthenium-based catalyst

  • García Moreno, Adrián
  • Da Silva, Elianny
  • García Martínez, Tomás
  • López Sebastián, José Manuel
  • Fernández-Domene, Ramón
  • Erans, María
  • Dejoz, Ana
  • Sánchez-Tovar, Rita
  • Solsona, Benjamín
11 figures, 3 tables., The growing demand of energy and the increase in the greenhouse gases emissions has caused the search for new renewable energy sources, such as biomass, to replace fossil fuels. Thus, there are different compounds, i.e. γ-valerolactone (GVL), which can be obtained from different biomass-derived substrates such as levulinic acid (LA). In the present work, the catalytic hydrogenation of levulinic acid to γ-valerolactone has been studied, using as a hydrogen source that obtained by photoelectrocatalytic water splitting. The use of the photoelectrocatalytic hydrogen has been conducted in two ways: i) one set-up in two steps involving a cell for hydrogen production and a reactor for the LA to GVL transformation or ii) a novel set-up consisting of just one unit in which hydrogen formation and LA hydrogenation take place simultaneously. The photoelectrocatalyst used for the water to hydrogen reaction is a TiO2 nanostructure synthesized by electrochemical anodization, whereas several catalysts based on ruthenium have been studied for the LA hydrogenation. Optimization in the synthesis procedure of ruthenium catalysts supported on gamma-alumina has allowed high yields to GVL at low reaction temperature (30 °C). The most efficient ruthenium catalyst presenting high proportion of surface metallic ruthenium and high dispersion on the support was that synthesized by a simple precipitation method. Finally, the use of the novel one-unit set-up makes possible not only achieving high GVL yields but also the recyclability of the catalyst with just a scarce loss in productivity, conversely to what happens using the traditional hydrogenation with pressurized hydrogen., The authors would like to acknowledge the Generalitat Valenciana for funding through the CIAICO/2021/094, CIGRIS/2022/198, CIGE/2023/43 and CIGE/2022/166 projects. M.E. is grateful for Grant RYC2021-031428-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. The authors also thank the Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación and European Union NextGenerationEU through the projects PID2021-126235OB-C33 MCIN/AEI/10.13039/501100011033/FEDER Una manera de hacer Europa, UE and TED2021-129555B–I00/AEI/10.13039/501100011033/Unión Europea NextGenerationEU/ PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Continuous production of γ-valerolactone from furfural using optimized catalysts containing Zr and Nb

  • García Moreno, Adrián
  • Saotta, Ana
  • Da Silva, Elianny
  • Miguel, P.J.
  • Allegri, Alessandro
  • Sánchez-Tovar, Rita
  • Morin, Jean-Charles
  • Gardoll, Olivier
  • García Martínez, Tomás
  • López Sebastián, José Manuel
  • Albonetti, Stefania
  • Dimitratos, Nikolaos
  • Solsona, Benjamín
16 figures, 3 tables., γ-Valerolactone (GVL) is a versatile platform molecule that can be produced from furfural (FF), a compound readily obtained from biomass. The transformation of FF into GVL can be achieved in a one-pot process through a cascade of reactions involving hydrogenation, ring opening, dehydration, and cyclization. Designing an appropriate catalyst capable of promoting all these steps in a single system is therefore essential. In this work, catalysts based on zirconium supported on Y-zeolite, as well as catalysts supported on Y-zeolite coated with a theoretical monolayer of Nb2O5, were synthesized and evaluated for the conversion of FF into GVL. Reactivity tests were conducted under both batch and continuous-flow conditions. The catalysts were characterized using various techniques, including XRD, FTIR, IR-Py, DR-UV–Vis, HR-TEM, XPS, and NH3-TPD, to determine their physicochemical properties. Among the catalysts studied, Zr supported on Nb-modified Y-zeolite exhibited the highest catalytic activity, achieving a GVL yield of 65 % after 3 h at 180 °C in batch mode using 2-propanol as both hydrogen source and solvent. Similarly, under continuous-flow conditions, this bimetallic catalyst delivered the highest GVL yield (approximately 40 %), representing the best performance reported to date for this reaction. Furthermore, the addition of water to the reaction medium enhanced catalytic performance. Notably, the bimetallic catalyst maintained stable activity throughout the tested time-on-stream., The authors would like to acknowledge the Generalitat Valenciana for CIAICO/2024/087 and CIGRIS/2022/198. The authors also thank the Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación and European Union NextGeneration EU through the projects PID2021–126235OB-C33 MCIN/AEI/10.13039/ 501100011033/FEDER Una manera de hacer Europa, UE and TED2021–129555B–I00/AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for Continuous production of γ-valerolactone from furfural using optimized catalysts containing Zr and Nb [Dataset]

  • García Moreno, Adrián
  • Saotta, Anna
  • Da Silva, Elianny
  • Miguel, P.J.
  • Allegri, Alessandro
  • Sánchez-Tovar, Rita
  • Morin, Jean-Charles
  • Gardoll, Olivier
  • García Martínez, Tomás
  • López Sebastián, José Manuel
  • Albonetti, Stefania
  • Dimitratos, Nikolaos
  • Solsona, Benjamín
Under a Creative Commons Attribution-NonCommercial 4.0 International licence., Table S1. Comparison between the GVL yield (%) achieved in this work in comparison to the results published in literature for the same reaction in batch mode. GC-FID calibration for continuous flow reactions: In order to obtain the moles of the various compounds actually present at the end of the reaction, it is necessary to calibrate the instrument. Calibrations were carried out on the individual compounds, obtaining the standards by diluting the stock solution in 25mL flasks and adding 20μl of octane as an internal standard in each. The theoretical concentrations of the stock solution and the various standards have been reported in Tables S2 and S3. The compounds used for the calibrations were: furfural (FUR), furfuryl alcohol (FAL), α-angelic lactone (AnL), propyl levulinate (PL), furfuryl ethyl ether (FEE) and γ-valerolactone (GVL). It was not possible to calibrate isopropyl levulinate (which is the molecule that is actually formed during the reaction) as it is not a commercial molecule. It was therefore decided to use its isomer (propyl levulinate) assuming that the two response factors are equal. Furfuryl isopropyl ether (FPE) is also a compound absent on the market and its response factor has been assumed to be the same as that of FEE since it was the closest molecule of those commercially available. The chromatogram obtained from the calibration of the species described is shown in Figure S1. Table S2. List of compounds used and their quantities for the preparation of stock solutions using iPrOH as a solvent Table S3. Concentrations of the standards prepared for each individual compound from their own stock solutions Table S4. XPS results for the different O1s spectral region contributions, The authors would like to acknowledge the Generalitat Valenciana for CIAICO/2024/087 and CIGRIS/2022/198. The authors also thank the Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación and European Union NextGeneration EU through the projects PID2021–126235OB-C33 MCIN/AEI/10.13039/ 501100011033/FEDER Una manera de hacer Europa, UE and TED2021–129555B–I00/AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR., Peer reviewed