Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 352
Encontrada(s) 4 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Supramolecular interaction of a molecular catalyst with a polymeric carbon nitride photoanode enhances photoelectrochemical activity and stability at neutral pH

  • Mondal, Sanjit
  • Salati, Martina|||0000-0001-5681-7245
  • Nicaso, Marco
  • Albero, Josep|||0000-0002-4841-7206
  • Segado Centellas, Mireia|||0000-0002-1290-6403
  • Volokh, Michael|||0000-0001-8510-9336
  • Bo, Carles|||0000-0001-9581-2922
  • García, Hermenegildo|||0000-0002-9664-493X
  • Gil-Sepulcre, Marcos|||0000-0002-2839-8108
  • Llobet Dalmases, Antoni|||0000-0002-6176-5272
  • Shalom, Menny|||0000-0002-4506-4177
Polymeric carbon nitride (CN) emerged as an alternative, metal-free photoanode material for water-splitting photoelectrochemical cells (PECs). However, the performance of CN photoanodes is limited due to the slow charge separation and water oxidation kinetics due to poor interaction with water oxidation catalysts (WOCs). Moreover, operation under benign, neutral pH conditions is rarely reported. Here, we design a porous CN photoanode connected to a highly active molecular Ru-based WOC, which also acts as an additional photo-absorber. We show that the strong interaction between the π-system of the heptazine units within the CN with the CH groups of the WOC's equatorial ligand enables a strong connection between them and an efficient electronic communication path. The optimized photoanode exhibits a photocurrent density of 180 ± 10 μA cm -2 at 1.23 V vs. the reversible hydrogen electrode (RHE) with 89% faradaic efficiency for oxygen evolution with turnover numbers (TONs) in the range of 3300 and a turnover frequency (TOF) of 0.4 s -1, low onset potential, extended incident photon to current conversion, and good stability up to 5 h. This study may lead to the integration of molecular catalysts and polymeric organic absorbers using supramolecular interactions. Supramolecular interaction of a Ru oligomeric catalyst with polymeric carbon nitride forms CN-Ru hybrid system, achieving high photoelectrochemical water-splitting activity, enhanced stability, and.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure determination of as-made zeolite ITQ-52 by three-dimensional electron diffraction

  • Tirado-Castaño, Juan Ignacio
  • Das, Partha Pratim
  • Palatinus, Luká
  • Plana-Ruiz, Sergi
  • Simancas, Jorge
  • Simancas, Raquel
  • Nicolopoulos, Stavros
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The complete crystal structures of two as-made zeolites with the ITQ-52 structure (IFW framework type), where an alkylphosphonium and an aminophosphonium dications have been used as their respective organic structure-directing agents, have been solved by three-dimensional electron diffraction. Both organic cations have also been located within the 10-ring that connects the cavities of the IFW framework using the diffraction data., Authors acknowledge financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S and PID2022-136934OB-I00 grants funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe", and grant TED2021-130191B-C41 funded by MCIN/AEI/10.13039/501100011033 and "European Union Next Generation EU/PRTR") . Authors acknowledge also financial support from Generalitat Valenciana (Project Prometeo 2021/077 and project MFA/2022/047 funded by "Advanced Materials Programme" of Generalitat Valenciana "European Union Next Generation EU/PRTR") . J.I.T. acknowledges grant PRE2018-083623 from project SEV-2016-0683-18-3. The authors acknowledge the Electron Microscopy Service of the Polytechnique University of Valencia (UPV) , the Scientific and Technological Centers of the University of Barcelona (CCiTUB) and the CzechNanoLab Research Infrastructure supported by MEYS CR (LM2023051) for assistance in electron microscopy characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mixed-metal promotion in a Manganese-Molybdenum Oxynitride as catalyst to integrate C-C and C-N coupling reactions for the direct synthesis of acetonitrile from syngas and ammonia

  • Martinez-Monje, María Elena
  • Henao-Sierra, Wilson Albeiro
  • Ródenas Torralba, Tania
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Prieto González, Gonzalo|||0000-0002-0956-3040
  • Pérez Dieste, Virginia
  • Missyul, Alexander
  • Agostini, Giovanni
[EN] Transition metal nitrides and their oxy- and carbo-nitride analogues attract interest as catalysts in various sustainability areas. They offer potential in the development of conversion routes for the synthesis of nitrogenated organic compounds, via the integration of C & horbar;C and C & horbar;N coupling reactions from sustainable C1 and N1 feedstocks, linking carbon and nitrogen renewable cycles. Herein, a series of structurally uniform (NH4)nHmMxMoyOz2H2O ammonium metal molybdate materials (C 2/m) serve as catalyst precursors, providing atomic-level metal mixing. Among various 3d transition metals, Mn proves the most effective promoter. A [MnMo] mixed-metal catalyst exhibits superior selectivity to acetonitrile (56 % among all organic products) and stability, significantly outperforming monometallic [Mo] and [Mn] counterparts. Multimodal physicochemical characterization, including temperature-resolved X-ray diffraction, Xray absorption near-edge structure and extended X-ray absorption fine structure, and depth-profiling X-ray photoelectron spectroscopy, shows partial nitridation to a cubic (Fm-3m) mixed-metal oxynitride as the working catalyst under operation conditions. Consistent with first-principles thermochemistry, manganese is found to disrupt extended molybdenum nitride domains, preserving manganese-enriched oxynitride domains under the markedly nitriding reaction conditions. Density functional theory predicts these partially oxidic domains to facilitate C & horbar;C coupling reactions compared to fully nitrided surfaces, enhancing conversion of the stable reaction intermediate HCN to acetonitrile., This work received funding from the European Research Council (ERC2019-CoG 864195). Additionally, parts of this study were funded through the projects PID2022-140111OB-I00, and CEX2021-001230-S, funded by MCIN/AEI/10.13039/501100011033/ and ERDF A way of making Europe, as well as part of the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1) and by Generalitat Valenciana (project MAF/2022/012). High-resolution XRD, SR-XPS and XAS experiments were performed at the BL04-MSPD, BL24-CIRCE and BL22-CLÆSS and BL16-NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff. M.D. W.H. acknowledges the predoctoral grant PRE2019- 087571, funded by the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033/ and ERDF A way of making Europe. T.R. acknowledges support by the Ramón y Cajal Program (Grant No. RYC2022-037355-I), funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. M. A. Herrero, J. Soriano and M.D. Soriano (ITQ) and M. M. Abad (UG) are acknowledged for experimental contributions to elemental analysis, (SR)XPS and EDS experiments, respectively. The electron microscopy unit at UPV is acknowledged for support with, and maintenance of, their electron microscopy facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly Versatile Hydrogenative Functionalizations of Phthalimides Catalyzed by an Ag-Alumina Zeolite Nanocomposite: One-Pot Synthesis of 3-Substituted Isoindolinones

  • Cabrero Antonino, Jose Ramón|||0000-0001-9628-9803
  • Adam, Rosa
  • Lluna-Galán, Carles
[EN] The rational design of heterogeneous catalysts for mediating sustainable, as well as complex, organic processes is currently a hot topic in fine-chemistry and catalysis fields. In this work, we present the first heterogeneous-catalyzed protocol able to mediate the one-pot synthesis of 3-functionalized isoindolinones from phthalimides, nucleophiles, and molecular hydrogen. More specifically, the composite formed by [Ag/Al2O3] nanomaterial and [H-BETA] (Si/Al = 10.5) zeolite as cocatalyst constitutes a recyclable nanocatalyst to perform hydrogenative functionalizations of a diversity of phthalimides and produce C3-functionalized isoindolinones via formation of novel C=O (alkoxylation), C=N (amination), and C=C (arylation) bonds. For the first time, even nitrobenzenes have been employed as reagents for amination reactions at the C=O of phthalimides. By applying this catalytic protocol, more than 30 examples of 3-functionalized isoindolinone derivatives have been successfully obtained through a one-pot hydrogenative strategy, demonstrating its general applicability. Interestingly, we have performed mechanistic, kinetic, and characterization studies that helped us to better understand the catalytic system. These studies revealed the key role of the zeolite cocatalyst, with the suitable topology and Br & ouml;nsted acid sites, for driving the selectivity towards formation of the desired C3-funcionalized isoindolinone., This work was supported by the Generalitat Valenciana with SEJI program (Subvencions Excelencia Juniors Investigadors, grants SEJI/2019/006 and SEJI/2020/013). The work was also funded by Spanish Government via MICINN with the PID2024-16034NA-I00 grant and CNS2024-154828 grant funded by MICIU/AEI/10.13039/501100011033, as well as CNS2023-144172 grant funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged. J. R.C.-A. and R. A. thank MICINN (Spanish Govern ment) for two Ramon y Cajal contracts (ref. RYC-2017-22717 and RYC2020-029493-I). The authors thank Dr. Urbano Diaz for providing us the ITQ-2 zeolite. The authors also acknowledge support of the publication fee by the CSIC OpenAccess Publication Support Initiative through its Unit of Informa-tion Resources for Research (URICI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of morphology and composition of spherical layered double hydroxide particles and derived mixed oxides on photocatalytic CO 2 reduction

  • Molina-Muriel, Manuel
  • Eledath-Changarath, Mahesh
  • Dhingra, Archit
  • Sánchez-Royo, J. F.
  • Ribera, Antonio
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Considering the flexibility in the synthesis that allows the formation of materials with more than two metals, the present study reports the preparation of trimetallic layered double hydroxides (LDHs) having Al as structural tripositive cation, Ti as photocatalytically active d 0 transition metal and either Ni or Co as dipositive cation. In addition, these LDHs were used as precursors of the corresponding trimetallic mixed oxides (MO). LDH and MO materials in combination with Ru(bpy) 3 Cl 2 as photosensitizer and triethanolamine as sacrificial electron donor were used as catalysts for CO 2 reduction under solar light irradiation. A different product selectivity, either CH 4 for Ni-LDH or CO and H 2 for Co -MO, was observed with production rates for CH 4 or CO that are among the highest reported for these systems. The role of the inorganic materials in the photocatalytic process was supported by transient absorption spectroscopy that revealed the quenching of the Ru(bpy) 3 Cl 2 triplet excited state by Ni-LDH or Co -MO. An important finding was that the trimetallic Co -Ti -Al oxide with cobaltite structure is able to perform CO 2 reduction in spite that the reduction potential of its conduction band is not sufficient to perform the process, evidence by photoluminescence revealing the existence of an upper electronic state responsible for the reduction. These results show the interest in screening multimetallic materials in photocatalysis due to their improved performance and diverse properties., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-0126071-OB-CO21 and PID2021- 125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021-038, CIPROM- 2022-60 and Advanced Materials Program MFA-2022-023 and MFA- 2022-057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M. M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Surface-State-Regulated Product Distribution in Photothermal CO2 Hydrogenation Over MXene-Based S-Scheme Catalyst

  • Kruger, Dawid Daniël
  • Cabrero-Antonino, Maria
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Osella, Silvio
  • Xu, Feiyan
  • Yu, Jiaguo
[EN] The rational design of heterostructured photocatalysts that simultaneously enable efficient carrier separation, photothermal synergy, and controllable reaction pathways is crucial for advancing CO2 conversion. Here, a Ni/Ti3C2Clx MXene heterojunction is synthesized via Lewis acid molten-salt etching, featuring ultrathin Ni platelets strongly anchored to the MXene substrate through interfacial TiNi3 bonding. This architecture establishes an S-scheme charge transfer pathway, as evidenced by in situ irradiated X-ray photoelectron and X-ray absorption spectroscopy, which confirm efficient carrier transfer and separation, while femtosecond transient absorption spectroscopy reveals ultrafast interfacial dynamics. Under photothermal conditions, the cooperative interplay of metallic Ni, surface NiOx, and the conductive MXene substrate couples directional charge migration with thermally assisted molecular activation and barrier lowering, thereby enabling regulated CO2 hydrogenation product distribution between CH4 and CH3OH. Density functional theory demonstrates that surface-state evolution, rather than simple oxidation degree, modulates adsorption energetics and alters the relative barriers of CH4 and CH3OH pathways, such that moderately oxidized Ni-NiOx interfacial ensembles favour methanol forming intermediates, whereas extensive oxidation suppresses CH3OH formation. Collectively, these findings demonstrate a robust strategy for exploiting MXene-based heterojunction interfaces in photothermal catalysis and underscore the pivotal role of surface state regulated reaction pathways in steering product distribution during CO2 hydrogenation., This work was supported by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PID2024-161014NB-I00 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (CIPROM/2024/071 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) and European Commission through the ERC Adv. Grant 101141466 DISCOVERY is gratefully acknowledged. D.D.K. gratefully acknowledges aid contract PRE2022-102036, financed by MCIN/AEI/10.13039/501100011033 and by the ESF +. S.O. Additional funding has been given by the National Key Research and Development Program of China (2022YFB3803600), the National Natural Science Foundation of China (U22A20147, 22261142666, 51932007, 22238009, 22361142704, and 52502372), the Natural Science Foundation of Hubei Province of China (2022CFA001 and 2025AFB018), and the National Postdoctoral Program for Innovative Talents (BX20240341),
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Liquid phase laser ablation as a general green physical etching method to prepare MXene dots with arbitrary surface functionalization. Implications in overall water splitting photocatalysis

  • Ramírez-Grau, Rubén
  • Cabrero-Antonino, Maria
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Rey Cortes, Francís
  • Mínguez-Vega, Gladys
  • Quesne, Matthew G.
  • Catlow, C. Richard A.
  • Mata, Jose A.
[EN] A novel green, fluoride-free etching method allowing installation of surface groups at will for the preparation 0D MXene dots with notable photocatalytic activity is reported. The method consists in the liquid-phase laser ablation using a pulsed Nd-YAG laser (532 nm, 7 ns fwhp, 30 mJ pulse(-1), 10 Hz) that produces the physical Al etching of the Ti3AlC2 precursor forming nanometric Ti3C2 particles. Simultaneously with etching, the surface of the MXene dots become functionalized with organic moieties inherited from the liquid phase as confirmed by XPS and in several cases by FT-IR spectroscopy. The lateral particle size of the Ti3C2 dots depends on the viscosity of the liquid medium and varies from a few nm to above 50 nm. Crystallinity and structure of the Ti3C2 dot is confirmed by high resolution TEM and by selected area electron diffraction of the samples. Ti3C2 dots promote photocatalytic overall water splitting into H-2 and O-2, the activity depending on the nature of the surface terminal groups. However, upon reuse the Ti3C2 dots become significantly degraded into amorphous material, decreasing gradually in photocatalytic activity. This degradation is proposed to be caused by self-oxidation of Ti3C2 dots by the photogenerated holes, as evidenced by the fact that the use of methanol as hole quencher stops deactivation during H-2 production. In sharp contrast with the decay in photocatalytic activity the presence of hole quenchers, the Ti3C2 dots even increase substantially their photocatalytic activity upon reuse, a fact that has been attributed to the optimization of the nature of the surface terminal groups during the photocatalytic process., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 and PDI2021-0126071-OB-CO22 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) and European Commission (ERC Discovery) are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Self-optimizing metal-free porous reactors with dynamic active sites unlock record oxygen reduction activity

  • Zhang, Lei
  • Xu, Qiaoling
  • Chen, Mengshan
  • Zhang, Yongcai
  • Zhou, Yingtang
  • Hu, Guangzhi
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Efficient metal-free catalysts are crucial for advancing aluminum-air batteries (AABs), yet their development has been hindered by poor electronic structure optimization and sluggish mass transport. In this study, we developed a hierarchically porous N/S co-doped carbon nanoreactor via an etching-doping pyrolysis strategy, achieving an ultrahigh surface area of 2630 m2 g-1 and a well-organized pore network. The resulting catalyst demonstrated outstanding oxygen reduction reaction (ORR) activity, with half-wave potentials of 0.952 V (vs. RHE; RHE stands for reversible hydrogen electrode) in alkaline and 0.754 V (vs. RHE) in acidic media. When assembled into AABs, it delivered a peak power density of 265 mW cm-2 and an energy density of 4152 Wh kg-1, along with excellent cycling stability. Finite element simulations showed that the hierarchical porosity promoted oxygen diffusion and enhanced reaction kinetics. Furthermore, in situ characterization and theoretical calculations revealed that S-C-N configurations dynamically transformed into Opre-S-C-N groups under working conditions, which modulated the electronic structure of adjacent carbon sites, facilitated *O-to-*OH conversion, and reduced energy barriers. This study provided a dynamic site-regulation strategy for improving ORR kinetics in metal-free catalysts and offered a new pathway for designing high-performance energy materials operating under realistic conditions., This work was financially supported by the Outstanding Youth Scientific Research Project for Colleges and Universities of Anhui Province of China (2022AH020054), the Open Research Fund Program of Anhui Province Key Laboratory of Specialty Polymers (Anhui University of Science & Technology, AHKLSP23-06), and the Xinjiang Key Laboratory of Novel Functional Materials Chemistry Open Science Project (XJLNFMC-202406). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union Next Generation EU PRTR-C17.I1) is also gratefully acknowledged. The authors would like to thank the Analytical and Testing Center (Anhui University of Science & Technology) for the XRD, XPS, and TEM analysis. The authors thank Mr Fu from SCI-GO (https://www.sci-go.com) for performing the BET analysis. The authors extend their gratitude to Ms Hao (from Scientific Compass https://www.shiyanjia.com) for providing invaluable assistance with the SEM analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Organic Electrochemical Neurons: Nonlinear Tools for Complex Dynamics

  • Rivera-Sierra, Gonzalo|||0009-0008-2651-9157
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • Bisquert, Juan|||0000-0003-4987-4887
[EN] Hybrid oscillator architectures that combine feedback oscillators with self-sustained negative resistance oscillators have emerged as promising platforms for artificial neuron design. In this work, we introduce a modeling and analysis framework for amplifier-assisted organic electrochemical neurons leveraging nonlinear dynamical systems theory. By formulating the system as coupled differential equations describing membrane voltage and internal state variables, we identify the conditions for self-sustained oscillations and characterize the resulting dynamics through nullclines, phase space, and bifurcation analysis, providing complementary insight into standard circuit-theoretic arguments of the operation of oscillators. Our simplified yet rigorous model enables tractable analysis of circuits integrating classical feedback components (e.g., operational amplifiers) with devices exhibiting negative differential resistance such as organic electrochemical transistors (OECTs). This approach reveals the core mechanisms behind oscillation generation, demonstrating the utility of dynamic systems theory in understanding and designing complex hybrid circuits. Beyond neuromorphic and bioelectronic applications, the proposed framework offers a generalizable foundation for developing tunable biologically inspired oscillatory systems for sensing, signal processing, and adaptive control., This work was funded by the European Research Council (ERC) via Horizon Europe Advanced Grant, grant agreement n degrees 101097688 ("PeroSpiker"). Additional financial support was provided by the Spanish Ministry of Science and Innovation (CEX2021-001230 S grant funded by MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Phosphate-Terminated Nb2C MXene as Efficient Catalyst for the Transformation of Glucose Into 5-Hydroxymethylfurfural With 3077 h-1 Turnover Frequency

  • Raya-Barón, Álvaro
  • Romero-Salicio, Elena
  • Tian, Liang|||0000-0002-3801-653X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • BOGDAN COJOCARU
  • Parvulescu, Vasile
[EN] The production of 5-hydroxymethylfurfural (HMF) from glucose is a reaction of considerable interest in biomass conversion into platform molecules. This reaction suffers, however, in general from low selectivity and the generation of undesirable polymeric byproducts (humins). Herein, we describe the preparation of phosphate-terminated Nb2C MXene (Nb2C-PO4) as a novel heterogenous water-tolerant acid catalyst, able to afford high yields of HMF, while minimizing humin formation. The phosphate-modified Nb2C has been extensively characterized (X-ray diffractometry (XRD), high resolution transmission electron microscopy (HRTEM), scanning transmission electron microscopy (STEM-EDS), X-ray photoelectron spectroscopy (XPS)) in order to prove the retention of the MXene structure and the presence of phosphate groups on the surface, and the acid-base properties have been assessed by NH3- and CO2-TPD and pyridine-DRIFTS. Apparently, the effect of phosphate is to mask less selective acid sites, while the remaining ones are more selective to promote HMF formation from glucose. This proposal is also supported by the contrasting behavior of pyridine and 2,6-di-tert-butylpyridine as quenchers of acid sites. Under optimized conditions, 64% yield of HMF can be obtained at 150 degrees C in a monophasic THF/water mixture, using a high glucose concentration (5% w/w) and a low Nb2C-PO4 loading (S/C = 10 w/w), reaching a TOF of 3077 h-1., This work was supported by Agencia Estatal de Investigacion (CEX-2021-01230-S and PID2024-161014 NB-I00), Generalitat Valenciana (CIPROM2024-071) and European Commission (ERC Adv. Grant 101141466 DISCOVERY).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impedance Spectroscopy of Bifurcation Oscillations in S-Type Self-Oscillatory Devices

  • Rivera-Sierra, Gonzalo|||0009-0008-2651-9157
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • Rubio-Magnieto, Jenifer|||0000-0002-8736-9163
  • Bisquert, Juan|||0000-0003-4987-4887
  • Mathews, Nripan
  • Ng, Si En
[EN] Self-sustained electronic oscillators are emerging as key building blocks for physical neuromorphic computing. Among them, S-type negative differential resistance (NDR) devices offer wide material versatility and strong tunability of their internal dynamics. While nonlinear theory predicts their stability regimes and bifurcations with high accuracy, experimental access to these regimes remains limited. Here, we combine theory and experiment to characterize the stability regimes of an S-type NDR thyristor device exhibiting self-sustained oscillations. By mapping nonlinear control-theoretic concepts onto impedance spectroscopy (IS) measurements, we show that frequency-domain characterization provides direct experimental signatures of stability, bifurcations, and oscillatory regimes, despite the intrinsically nonlinear nature of the system. The measurements further reveal the interaction between autonomous and forced oscillations, as well as entrainment and phase locking phenomena. Our results establish IS as a powerful in situ probe of nonlinear dynamical behavior in oscillatory devices, with direct relevance for neuromorphic and oscillator-based hardware., This work was funded by the European Research Council (ERC) via Horizon Europe Advanced Grant, grant agreement n degrees 101097688 ("PeroSpiker"). Additional institutional support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. S.E.N and N.M thank the support from the National Research Foundation (NRF), Singapore, under its Competitive Research Program (CRP) (NRF-CRP25-2020-0002).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Silver-Exchanged Zeolite Y Catalyzes a Selective Insertion of Carbenes into C-H and O-H Bonds

  • Zheng, Yongkun
  • Hernández-Garrido, Juan Carlos
  • Vidal Moya, José Alejandro
  • Mon-Conejero, Marta|||0000-0002-1983-1096
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] Commercially available zeolite Y modulates the catalytic activity and selectivity of ultrasmall silver species during the Buchner reaction and the carbene addition to methylene and hydroxyl bonds, by simply exchanging the counter cations of the zeolite framework. The zeolite acts as a macroligand to tune the silver catalytic site, enabling the use of this cheap and recyclable solid catalyst for the in situ formation of carbenes from diazoacetate and selective insertion in different C-H (i.e., cyclohexane) and C-O (i.e., water) bonds. The amount of catalyst in the reaction can be as low as <= 0.1 mol % silver. Besides, this reactivity allows deeply drying the HY zeolite framework by making the strongly adsorbed water molecules react with the in situ formed carbenes., This work is part of the project PID2020-115100GB-I00 funded by MCIN/AEI/10.13039/ 501100011033MICIIN (Spain). Thanks are extended to the TED2021-130465B-I00 project of the MICIIN. Financial support by the Severo Ochoa Centre of Excellence Program ( CEX2021- 001230-S) is gratefully acknowledged. M.M. thanks MICIIN for a contract under the Juan de la Cierva program (FJC2019-040523-I). Y.Z. thanks the China Scholarship Council (CSC No. 202009350009) for a Ph.D. fellowship. The AC-STEM data were obtained at the DME-UCA node of the Spanish Unique Scientific and Technological Infrastructure (ICTS) of Electron Microscopy of Materials, ELECMIM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Controlling Selectivity at the First Hydrogenation Level: Synthesis of 3-Hydroxyisoindolines by Heterogeneously Silver-Catalyzed Monohydrogenation of Phthalimides

  • Lluna-Galán, Carles
  • Adam, Rosa
  • Cabrero Antonino, Jose Ramón|||0000-0001-9628-9803
[EN] The development of robust nanocatalysts able to mediate important organic transformations with high levels of selectivity constitutes a hot topic in fine-chemistry and catalysis fields. In this context, the rational design of heterogeneous catalysts featuring suitable active sites for obtaining 3-hydroxyisoindolinones by the direct monohydrogenation of highly accessible phthalimides is an attractive approach. This work presents the design and successful catalytic application of a robust and recyclable [Ag/Al2O3] nanomaterial capable to promote the synthesis of a wide range of 3-hydroxylactams through the catalytic monohydrogenation of phthalimides with total atom-economy. It is important to remark that this transformation proceeds with full chemoselectivity, exhibiting complete tolerance to the presence of (hetero)aromatic rings and being able to stop the hydrogenation at the first intermediate level. A deep effort concerning material catalyst optimization and characterization study are performed, determining that the optimal [Ag/Al2O3] is composed of silver nanoparticles with an overall size of 2.3 nm homogeneously distributed across the alumina matrix. The characterization together with the performance of kinetic/mechanistic investigations allows to propose an intimate contact between accessible Ag0 sites and Lewis acidic centers is crucial for the catalyst system to perform the hydrogenative process with complete efficiency., This work was supported by the Generalitat Valenciana through SEJI (Subvencions Excelencia Juniors Investigadors, grants SEJI/2019/006 and SEJI/2020/013) and PROMETEO/2021/077 programs and the RETOS I+D+I program from MICINN (PID2019-109656RA-I0/AEI/10.13039/501100011033). The work was also supported by the Spanish Government via the CNS2024-154828 grant funded by MICIU/AEI/10.13039/501100011033 and CNS2023-144172 grant funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged. J.R.C.-A. and R.A. thank MICINN (Spanish Government) for two Ramon y Cajal contracts (ref. RYC-2017-22717 and RYC2020-029493-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Defect-surface engineering of La-doped ceria for microwave-assisted hydrogen production

  • Domínguez-Saldaña, Aitor|||0000-0001-7539-7493
  • Carrillo-Del Teso, Alfonso Juan
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Plaza González, Pedro José|||0000-0002-2623-0782
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Navarrete Algaba, Laura
  • Santos, Joaquin
  • Catalán-Martínez, David
[EN] Hydrogen plays a pivotal role in decarbonizing the energy and chemical sectors, yet current production methods are limited by high temperatures and energy demands. Microwave-assisted thermochemical redox cycles offer a promising low-temperature, contactless alternative by coupling electromagnetic energy with reducible oxides. In this study, we explore La-doped ceria (Ce1-xLaxO2-delta) as a tunable platform to enhance microwave-driven hydrogen production. We demonstrate that introducing La3+ into the ceria lattice reduces the bandgap and increases dielectric permittivity, enabling Ce4+ to Ce3+ reduction at temperatures as low as 110 degrees C. Among the series, Ce0.9La0.1O1.95 exhibits optimal performance, balancing high ionic mobility and microwave absorption. Combined with tailored surface area, this composition achieves an unprecedented hydrogen production rate of 2.60 mL g-1 per cycle at temperatures below 400 degrees C. Correlations between dopant concentration, polarization behavior, and redox kinetics reveal the key role of band structure breakdown and defect formation in driving non-equilibrium reduction. Our findings uncover mechanistic insights into microwave-material interactions and establish design principles for next-generation redox materials. This approach provides a framework for scalable, electrified hydrogen production via electronic structure and defect engineering in oxide systems., Financial support by the Spanish Ministry of Science and Innovation and European Union (TED2021-132590B-C22, NextGenerationEU/PRTR, PID2022-139663OB-100, and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033, "Ramon y Cajal" Fellowship RYC2021-033889-I grants) and Vice-Rectorate for Research of the Universitat Politecnica de Valencia (PAID-06-24 grants). Also, we acknowledge the support of the Servicio de Microscopia Electronica of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient NiFe-Layered Double Hydroxide Electrocatalyst Synthesized via a Solvent-Free Mechanochemical Method for Oxygen Evolution Reaction

  • Molina-Muriel, Manuel
  • Campagna Zignani, Sabrina
  • Ribera, Antonio
  • Aricò, Antonino Salvatore
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The growing concern over climate change and the reliance on fossil fuels has spurred interest in alternative energy processes, particularly electrochemical water splitting to produce hydrogen (H2). This study focuses on developing cost-effective and efficient oxygen evolution reaction (OER) electrocatalysts. We report a novel solvent-free mechanochemical method for synthesizing NiFe-layered double hydroxide (LDH), which demonstrates promising electrocatalytic properties for the OER. The mechanochemical synthesis, requiring only 1 h of solid reagent grinding, produces NiFe-LDH with structural features comparable to those obtained via traditional aqueous phase methods. The electrocatalyst was evaluated in a single cell with a membrane-electrode assembly configuration under alkaline conditions, exhibiting an overpotential of 221 mV at a current density of 10 mA<middle dot>cm-2 and a Tafel slope of 103.1 mV<middle dot>dec-1, indicating excellent OER kinetics and low energy barriers. Additionally, the catalyst demonstrated robust durability, maintaining a potential of around 1.55 V during a 35 h test at high current densities of 0.1 A<middle dot>cm-2 and even 1.75 V at 1 A<middle dot>cm-2. This work highlights the potential of NiFe-LDH synthesized by an energy-efficient, environmentally green, and scalable process for large industrial water-splitting applications, contributing to the advancement of sustainable hydrogen production technologies., The authors acknowledge the financial support provided by the EU H2020 GREEN DEAL "ECO2FUEL" project "Large-scale low-temperature electrochemical CO2 conversion to sustainable liquid fuels" Grant Agreement number: 101037389. Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-0126071-OB-CO21, and PID2021-125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021-038, CIPROM-2022-60, and Advanced Materials Program MFA-2022-023 and MFA-2022-057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M.M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In Vitro Effect of Ferruginol, Tanshinone, and Carnosol Analogues on the Proliferation of Three Breast Cancer Cell Lines

  • González-Cardenete, Miguel A|||0000-0002-8762-0426
  • Mendoza-Hernández, William Ernesto
  • Lawson, Sydney L.
  • Rivas, Fatima
[EN] Ferruginol, tanshinones and carnosol are considered privileged natural products due to their demonstrated diverse biological activities with relevance to cancer research. Globally, cancer continues to be a major contributor to mortality rates, making these compounds potentially valuable molecular scaffolds for further development as potential anticancer agents. In this work, a focused library of ferruginol, tanshinone IIA, and carnosol analogues was studied to examine their effectiveness against various solid tumor models. The compounds were efficiently synthesized from either methyl 12-hydroxy-dehydroabietate or 12-hydroxydehydroabietylamine in 1¿3 step processes with good chemical yields. The compounds that were synthesized underwent a methodical evaluation using multiple biological tests (including viability assays, clonogenic assays, and mitochondrial membrane polarization measurements) to determine their ability to inhibit in vitro the growth of three breast cancer cell linages. It was determined that while most compounds exhibited biological activity, compounds 10 and 11 demonstrated significant efficacy against triple negative breast cancer cells. These compounds continue to show promising biological activity, suggesting that additional studies to understand their mechanisms of action would be valuable., This research was partially funded by the Louisiana Board of Regents Support Fund Award LEQSF-RD-A-05, NIGMS grant number R15 GM148983 to F.R, and the Beckman Scholars Award to S.L.L. The authors thank the Spanish Government (Project CEX2021-001230-S funded by MCIN/AEI /10.13039/501100011033 /FEDER, UE) for its financial support. This research was supported by the regional government Generalitat Valenciana, Conselleria de Educación, Universidades y Empleo , grant number CIAICO/2022/220 to M.A.G.-C.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly Stable Subnanometric Pt Clusters in All Silica K-Doped Zeolites: Implications for the CO Oxidation Reaction

  • Bohigues-Vallet, Benjamín
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Serna Merino, Pedro Manuel
  • Millet Roig, Isabel
[EN] Small metal clusters can provide improved catalytic activity compared with single metal atoms and larger metal nanoparticles of the same element. The stabilization of metal ensembles of a few atoms is extremely challenging, however, because reductive sintering and oxidative fragmentation are phenomena that often occur at low temperatures in reactive atmospheres. In this regard, the CO oxidation reaction is particularly challenging because CO tends to aggregate noble metals on nonreducible supports, such as SiO2, whereas O2 triggers the formation of (less active) single atoms on reducible supports, such as CeO2. Accordingly, state-of-the-art Pt/CeO2 catalysts undergo severe deactivation under practical CO oxidation conditions in excess of O2. In this contribution, we report a highly active CO oxidation catalyst that is able to overcome both sintering and fragmentation instabilities under conditions that make other alternatives fail. The catalyst is based on small Pt clusters inside K-MFI that benefit from both strong metal/support interactions at defective sites of the zeolite and strong electronic promotion by the support, to attain highly stable, highly active, electron-rich Pt clusters., This work has been supported by the Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR and by the Generalitat Valenciana by the Prometeo Program (CIPROM/2023/34). The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033). B.B. acknowledges the Spanish Government for a Severo Ochoa FPI scholarship (PRE2022-102555). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Boosting TiO2 photocatalytic hydrogen production via silica-core engineering, optimized shell architecture, and Pd nanoparticles decoration

  • Diego-López, Ander|||0000-0001-5947-9579
  • Tamarit-Mayo, Lorena
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Bosca Mayans, Francisco
[EN] Photocatalytic wastewater photoreforming is recognized as a sustainable method for hydrogen generation. In this study, a SiO2@TiO2¿Pd photocatalyst was rationally designed to achieve a balance among high photocatalytic efficiency, ease of recovery, and recyclability. This work also addresses unexplored factors, including the role of the SiO2 core in H2 evolution and the influence of the TiO2 shell thickness on photocatalytic performance. To this end, several core@shell SiO2@TiO2 photocatalysts with controlled TiO2 shell thicknesses were synthesized. The experiments on H2 evolution from glycerol photoreforming revealed that the hydrogen evolution rate is strongly influenced by both the TiO2 shell thickness and the SiO2 core, with the optimum TiO2 shell thickness (ca. 28 nm) photocatalyst showing a hydrogen generation rate 7 times higher than that of P25 (based on hydrogen evolution reaction, HER, rates normalized to the photoactive component of the materials). Decoration of the surface of the optimized SiO2@TiO2 photocatalyst with Pd nanoparticles further increased the hydrogen production rate per photoactive gram by 54-fold (31.9 mmol·h¿1·g¿1). To understand the mechanisms underlying the improved photocatalytic performance, photophysical and (photo)electrochemical characterizations were performed using laser flash photolysis, photoluminescence spectroscopy, and photocurrent measurements. Overall, this study demonstrates that a SiO2 core not only facilitates easier photocatalyst recovery but also positively influences its H2 production performance, resulting in a material 371 times more active than P25. These findings pave the way for the development of SiO2-supported photocatalysts for simultaneous treatment of wastewater and hydrogen production in continuous-flow systems., The authors would like to acknowledge the Spanish Ministry of Science, Innovation and Universities (TED2021-131952B-I00 and PID2023-151872OB-I00, financed by MCIN/AEI/10.130 39/501100011033 and by European Union NextGenerationEU/PRTR) . Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.130 39/501100011033) is gratefully acknowledged. This research was supported by Generalitat Valenciana through CLEAN-LAGOON project (PROMETEO/CIPROM-2024-49) . A. Diego-Lopez is indebted to the Universitat Politecnica de Valencia for the corresponding Predoctoral FPI fellowship (FPI-UPV/Subprograma 1, PAID-01-22) . L. Tamarit is grateful to the Universitat Politecnica de Valencia for the corresponding co-financed postdoctoral grant (PAID-10-24) . The authors would like to acknowledge the Servei de Microscopia Electronica from the Universitat Politecnica de Valencia (UPV) for the support in the materials characterization and sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Zeolite/LDH Composites as Additives for Light Olefin Production by Catalytic Cracking of Heavy Oil Fractions

  • Rodaum, Chadatip
  • Wattanakit, Chularat
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Martínez, Cristina|||0000-0002-4415-084X
[EN] Among the possible strategies for the enhancement of light olefin production in the catalytic cracking of heavy oils, the use of functional additives has proven to be an effective approach. Herein, we present a composite material (Z5-LDH) derived from medium-pore zeolite ZSM-5 (Z5) and layered double hydroxide (LDH)-based mixed oxides as a potential additive for catalytic cracking of heavy oils. This material shows enhanced selectivity to light olefins within the gaseous C3¿C4 fraction. The Z5-LDH composite features a core¿shell structure, with the zeolite forming the core, which is surrounded by an LDH shell. It exhibits reduced Brønsted acidity compared to pure ZSM-5 and surface basicity provided by the basic oxides formed upon calcination of the LDH. The catalytic performance of the composite has been compared with that of pure ZSM-5 for catalytic cracking of vacuum gasoil (VGO). When used as an additive, the composite yields a significantly higher olefin content and selectivity within the C3¿C4 gas fraction than a commercial USY base catalyst alone (17.2% compared with 11.3 wt %, respectively). Furthermore, the propylene/propane and butenes/butanes ratios obtained with the Z5- LDH additive are substantially higher than those obtained with the pure ZSM-5 additive. The enhanced selectivity to C3¿C4 olefins is related, on the one hand, to the lower density and acid strength of the Brønsted acid sites in Z5-LDH relative to ZSM-5, which minimizes secondary reactions such as hydrogen transfer. On the other hand, the basic mixed-metal oxide shell, derived from the LDH, inhibits the readsorption of the C3¿C4 olefins produced, limiting their further conversion and promoting light olefin selectivity. The advantages of the Z5-LDH composite as a fluid catalytic cracking (FCC) additive have been demonstrated not only for conversion of conventional VGO but also in the cracking of heavier feeds, such as atmospheric residue., This work was financially supported by the Vidyasirimedhi Institute of Science and Technology (VISTEC), the National Research Council of Thailand (NRCT) through the Royal Golden Jubilee (RGJ): NRCT5-RGJ63024, the Program Management Unit for Human Resources & Institutional Development, Research and Innovation (grant number: B41G680026), by the Spanish Government through PID2021-122755OB-I00 (funded by MCIN/AEI/10.13039/501100011033) and TED2021-130739B-I00 (funded by MCIN/AEI/10.13039/501100011033/EU/PRTR), and by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34). Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged. The authors thank Eva M. Briz for technical assistance and the Electron Microscopy Service of the UPV for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

2D/2D MOF/MXene Schottky Junction: Prolonged Carrier Lifetime and Enhanced Hydrogen Evolution Efficiency

  • Cabrero-Antonino, Maria
  • Uscategui-Linares, Andrés Felipe|||0000-0003-2448-9966
  • Ramírez-Grau, Rubén
  • García-Aznar, Pablo|||0000-0003-0586-0037
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Zhang, Jianjun
  • Yu, Jiaguo
  • Xu, Feiyan
[EN] Harnessing sunlight for photocatalytic overall water splitting offers a sustainable approach to renewable hydrogen (H2) production, addressing global energy and environmental challenges. However, the development of efficient and durable photocatalysts remains a significant obstacle. This study introduces the design and performance of a 2D/2D Schottky heterojunction composed of Cu2[CuTCPP] MOF of nanometric size and exfoliated Ti3C2 MXene for visible-light-driven overall water splitting. By leveraging the extensive interfacial contact between the two components, an interfacial electric field is generated, promoting efficient charge migration and prolonging carrier lifetimes, as confirmed through systematic density functional theory simulations, in situ irradiation X-ray photoelectron spectroscopy, femtosecond transient absorption spectroscopy, and X-ray absorption spectroscopy. Ti3C2 MXene, acting as a cocatalyst for photohole transport and accumulation, reduces oxidative degradation and slows catalyst deactivation. The synergistically enhanced light absorption properties of the Cu2[CuTCPP]/Ti3C2 heterojunction result in an impressive H2 evolution rate exceeding 5000 mu mol gcat(-)1, underscoring its potential for next-generation photocatalytic systems in renewable energy applications., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) and European Commission (ERC Adv. Grant 101141466 DISCOVERY) is gratefully acknowledged. R. R.-G. and J. A. thank the Spanish Ministry of Science and Innovation for a postgraduate scholarship and a Ramon y Cajal research associate contract, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of bi-functional Ni-zeolites for ethylene oligomerization: Controlling Ni speciation and zeolite properties by one-pot and post-synthetic Ni incorporation

  • Martínez-Gómez-Aldaraví, Adrián|||0009-0007-1928-8277
  • Paris, Cecilia|||0000-0002-5673-8114
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Martínez, Cristina|||0000-0002-4415-084X
[EN] The design of diverse Ni-zeolites has been performed attempting to control different physico-chemical properties of the zeolite supports as well as the Ni speciation to study their influence on the industrially relevant ethylene oligomerization reaction. In this sense, Ni-containing medium-pore MFI and large-pore BEA zeolites have been synthesized with different particle sizes, Si/Al molar ratios and following different Ni-incorporation strategies (one-pot versus post-synthesis). Characterization techniques reveal the preferential presence of cationic Ni2+ and NiO nanoclusters inside the zeolitic pores when Ni has been incorporated by post-synthesis impregnation or one-pot approaches, respectively. The presence of Ni2+ species, rather than other factors, mainly governs olefin oligomerization under near-ambient pressures, guiding preferentially towards C-4-C-6 olefins as main products. Crystal size, acidity and/or Ni incorporation methodology, on the other hand, play key roles under high-pressure reaction conditions, resulting in the formation of heavier olefins, especially in zeolites containing less cationic nickel, larger proportion of NiO clusters and higher Bronsted acid site density., This work has been supported by Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR), and by Generalitat Valenciana through AICO/2021/201. Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is also gratefully acknowledged. AMGA acknowledges the Spanish Government for a Severo Ochoa FPI scholarship (PRE2019-088361) . J. M. Salas is acknowledged for his contribution to CO-IR experiments. The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of alkyl trans alkenes from alkynes by catalytic semi hydrogenation reaction with parts per million of palladium: application to pheromone synthesis

  • Molina-Garcia, Miquel
  • Francesco
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Mon-Conejero, Marta|||0000-0002-1983-1096
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Manzorro, Ramón
  • Hernandez-Garrido, Juan C.
  • Martin-Diaconescu, Vlad
  • Aragón, Jordi
[EN] The direct catalytic synthesis of trans (E) alkenes from internal alkynes remains a challenge in organic synthesis, particularly for alkyl alkenes where the double bond can easily migrate by skeletal isomerization (alkene walking) under metal¿catalyzed reaction conditions. Here we show that parts¿per¿million (ppm) of PdCl2, the simplest Pd salt in the market, or even the solid Pd/C, catalyze the direct transformation of long¿linear chain internal alkyl alkynes into the corresponding trans (E) alkenes, after cis (Z) semi¿hydrogenation and in¿situ Z/E isomerization reactions, with just minor skeletal isomerization (< 10%) and none over¿hydrogenation reaction. Mechanistic experiments unveil that the catalytic active species for both the hydrogenation and Z/E isomerization are composed by ultrasmall species (clusters and individual atoms) of reduced Pd, which also enable the selective Z/E isomerization reaction of alkyl vs. aromatic alkynes. The synthesis of three representative industrial pheromone precursors is achieved with just 0.0015¿0.003 mol% of PdCl2 under mild reaction conditions, in up to 1 kg scale in one case. These results bring to the synthetic community an industrially viable methodology to obtain E alkyl alkenes from alkyl alkynes., This work is part of the project CPP2022 009991, and financial support by the project PID2023 148441NB I00, the Severo Ochoa centre of excellence program (CEX2021 001230 S), the RYC2022 036154 I grant and the project TED2021 130465B I00 are gratefully acknowledged to the MICIIN. XAS experiments were performed at the ALBA Synchrotron (BL 22 CLÆSS) with the collaboration of ALBA staff as part of experiment 20250330095. R. M. acknowledges financial support from Spanish National project PID022142312NB-I00 funded by MCIN/AEI/ h t t p s : / / d o i . o r g / 1 0 . 1 3 0 3 9 / 5 0 1 1 0 0 0 1 1 0 3 3 / and by ERDF A way of making Europe , and Project FEDER-UCA-2024-A1-31 funded by Programa Operativo FEDER Andalucía 2021 2027 and by Consejería de Universidad, Investigación e Innovación, Junta de Andalucía.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Role of Interfacial Energetics and Defects on The Efficiency of Tin Perovskite Solar Cells

  • Aldamasy, Mahmoud H.
  • Musiienko, Artem
  • Rusu, Marin
  • Regaldo, Davide
  • Iqbal, Zafar
  • Zuo, Shengnan
  • Hampel, Hannes
  • Frasca, Chiara
  • Bedir, Ahmed G.
  • Li, Guixiang
  • Nasti, Giuseppe
  • Li, Meng
  • Wang, Qiong
  • Unold, Thomas
  • Abate, Antonio
  • Pascual Mielgo, Jorge
[EN] Tin perovskites are emerging as a sustainable alternative to lead-based photovoltaics, yet their efficiency remains limited by energy-level mismatch and intrinsic instability from tin oxidation. Progress is further hindered by inconsistent electrical behavior, obscuring the true bottlenecks of device performance. Here, we deliver a comprehensive, layer-resolved analysis of FASnI3 solar cells, combining Kelvin probe and photoelectron yield spectroscopy to directly map the band structure and quantify interfacial losses. We reveal that the commonly overlooked Bathocuproine buffer layer plays a decisive role in boosting open-circuit voltage by forming a hybrid energy level with silver, enabling efficient electron extraction.Using time-resolved surface photovoltage, we uncover the ultrafast charge-transfer dynamics governing device operation. These insights expose a critical limitation in the conventional p-p-n, where severe recombination at the perovskite and hole transport interface suppresses performance. A transition to an n-p-p configuration significantly enhances charge extraction and minimizes recombination losses.By integrating these findings into a predictive digital twin, we establish a clear, experimentally validated roadmap toward tin perovskite solar cells exceeding 25% efficiency. This work provides both fundamental understanding and actionable design rules, accelerating the development of high-performance, lead-free photovoltaics., Authors Mahmoud Aldamasy, Antonio Abate, and Ahmed Attia acknowledge the funding provided by SMARTLINE PV under the Horizon Europe (2021-2027) grant number 101122327. This project has received funding from the German Federal Ministry of Education (BMBFTR) under the NanoMatFutur Call, project1091 number 03XP0625, COMET PV. Davide Regaldo acknowledges funding from "Programme d ' investissement d ' Avenir" (ANR-IEED-002-01). Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermal emission of hydrogenated amorphous silicon microspheres in the mid-infrared

  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • RAMIRO MANZANO, FERNANDO
[EN] Hydrogenated amorphous silicon microspheres feature a pronounced phononic peak around 2000 cm(-1) when they are thermally excited by means of a blue laser. This phononic signature corresponds to vibrational modes of silicon-hydrogen bonds and its emitted light can be coupled to Mie modes defined by the spherical cavity. The signal is apparently quite stable at moderate excitation intensities although there appeared some signs pointing to hydrides bonds reconfiguration and even hydrogen emission. Above a certain excitation threshold, a phase change from amorphous to poly-crystalline silicon occurs that preserves the good structural quality of the microspheres., This research was supported by the project MCIN/AEI/PID2021123163OB-I00, and the Severo Ochoa Centre of Excellence program (CEX2021-001230-S), Ministry for Science and Innovation (MCIN) of Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MOF-derived PdMn and PdCo bimetallic systems as bifunctional electrocatalysts for overall water splitting

  • Mazarío-Santa-Pau, Jaime
  • Martínez, Jordan Santiago
  • Márquez, Inmaculada
  • Lopes, Christian Wittee
  • Agostini, Giovanni
  • Villalobos-Portillo, Eduardo
  • Bazta, Otman
  • Trasobares, Susana
  • Calvino, Jose Juan
  • Calvente, Juan Jose
  • Olloqui-Sariego, Jose Luis
  • Cerezo-Navarrete, Christian
  • Gonzalo
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Bimetallic Metalorganic Framework (MOF)-derived PdCo and PdMn nanoparticles have been shown to be excellent bifunctional electrocatalysts for overall electrocatalytic alkaline water splitting. Through an innovative strategy combining a soft chemical (Q) transformation followed by pyrolysis (T) of PdCo-MOF and PdMn-MOF precursors, well-defined and uniformly distributed nanoparticles supported on N-doped graphitic carbon were synthesized (PdCo-QT and PdMn-QT, respectively). The influence of the first row transition metal into the bimetallic nanoparticles on the electrocatalytic activity for both electrocatalytic hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) was assessed. Comprehensive characterization using TEM/STEM, PXRD, Raman, XAS and XPS revealed the ultimate structural and compositional features of the synthesized materials. Notably, the bimetallic PdCo-based catalyst demonstrated the best electrocatalytic performance, exhibiting the lowest Tafel slopes for both HER and OER processes, along with superior thermodynamic and kinetic metrics compared to the bimetallic PdMn and monometallic Pd nanoparticles. The exceptional catalytic activity of the PdCo-QT electrode competes with that of benchmark materials, attributed to a synergistic effect between Pd and the secondary metal (Co), likely forming Pd-O(OH)-Co active centers. Moreover, operando and after electrocatalysis characterizations of the electrodes validate the remarkable stability and efficiency of PdCo-QT, underscoring its potential for practical water-splitting applications., Financial support by Severo Ochoa center of excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2022-140111OB-I00, PID2021-126799NB-I00, TED2021-130191B-C41, TED2021-130191B-C42, and TED2021-130191B-C44 funded by MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. C.W.L. acknowledges the National Council for Scientific and Technological Development-CNPq/Brazil (443418/2023-3) and PPGQ-UFPR for financial support. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Carlos Escudero, and Carlo Marini).r 130191B-C42, and TED2021-130191B-C44 funded by MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR) . This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047) . In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. C.W.L. acknowledges the National Council for Scientific and Technological Development-CNPq/Brazil (443418/2023-3) and PPGQ-UFPR for financial support. HR-STEM studies were performed at the DME-UCA node of the ELECMI Spanish Unique Infrastructure (ICTS) for Electron Microscopy of Materials. Some of these experiments were performed NOTOS beamlines at ALBA Synchrotron with the collaboration of ALBA staff (Carlos Escudero, and Carlo Marini) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A comprehensive mapping of zeolite-template chemical space

  • Xie, Mingrou
  • Schwalbe-Koda, Daniel
  • Hoffman, Alexander
  • Santiago-Reyes, Omar
  • Paris, Cecilia
  • Gomez-Bombarelli, Rafael
  • Semanate-Esquivel, Yolanda Marcela|||0009-0009-0289-4267
  • Bello-Jurado, Estefanía
  • Moliner Marin, Manuel|||0000-0002-5440-716X
[EN] Zeolites are industrially important catalysts and adsorbents, typically synthesized using specific molecules known as organic structure-directing agents (OSDAs). The templating effect of the OSDAs is pivotal in determining the zeolite polymorph formed and its physicochemical properties. However, de novo design of selective OSDAs is challenging because of the diversity and size of the zeolite-OSDA chemical space. Here we present ZeoBind, a computational workflow powered by machine learning that enables an exhaustive exploration of the OSDA space. We design predictive tasks that capture zeolite-molecule matching, train predictive models for these tasks on hundreds of thousands of datapoints and curate a library of 2.3 million synthetically accessible, hypothetical OSDA-like molecules enumerated from commercially available precursors. We use ZeoBind to screen nearly 500 million zeolite-molecule pairs and identified and experimentally validated two new OSDAs that template zeolites with novel compositions. The scale of the OSDA library, along with the open-access tools and data, has the potential to accelerate OSDA design for zeolite synthesis., M.M., C.P., E.B.-J. and Y.M.S.-E. acknowledge financial support by the Spanish Government through PID2021-122755OB-I00 (funded by MCIN/AEI/10.13039/501100011033) and TED2021-130739B-I00 (funded by MCIN/AEI/10.13039/501100011033/EU/PRTR), by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34) and CSIC through the I-link+ Program (ILINK24035). M.M., C.P., E.B.-J. and Y.M.S.-E. also thank the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033). M.X. acknowledges funding from the Agency of Science, Technology and Research (A*STAR) scholarship. D.S.-K. acknowledges funding from the MIT Energy Fellowship. E.B.-J. and Y.M.S.-E. acknowledge the Spanish Government for an FPI scholarship (PRE2019-088360) and a Severo Ochoa FPI scholarship (PRE2020-092319), respectively. R.G.-B. and A.H. acknowledge funding from MIT Deshpande Center, Alfred P. Sloan Research Fellowship (FG-2023-20026) and MISTI Inditex Fund. The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization. Computations were executed on MIT Engaging and Supercloud clusters.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Propane Dehydrogenation Over Reduced Ce O2 and Ce ZrO2

  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Gonell-Gómez, Francisco|||0000-0002-8658-2878
  • Bohigues-Vallet, Benjamín
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Serna Merino, Pedro Manuel
  • Alos Marti, Aroa
  • Hernández Fernández, Laura
[EN] The on-purpose generation of propylene via propane dehydrogenation (PDH) operates at industrial scale using supported transition metal catalysts of Pt and Cr. To overcome limitations associated with the high cost and elevated CO2 footprint of Pt mining, and with the high toxicity of the Cr systems, bulk non-noble metal oxides such as ZrO2 and TiO2 have been recently reported to catalyze the PDH reaction when activated in reducing atmospheres. CeO2, in contrast, despite its greater reducibility, has been deemed PDH inactive. Here, we demonstrate that CeO2 and CeZrO2 catalyze efficiently the PDH reaction, provided that deep, bulk-level degree of reduction is promoted. By combination of structural and chemical characterization, kinetic studies, and DFT modelling, we show that PDH proceeds through low-energy pathways that are unlocked only at these high levels of reduction. Incorporation of suitable amounts of Zr in CeZrO2 formulations reduces undesired side reactions and hinders the surface area losses that are otherwise observed in H-2 at high temperature in pure CeO2 systems, maximizing the catalyst specific activity. These findings broaden the set of non-noble metal oxides that can function as nontoxic, low cost, and environmentally friendly alkane dehydrogenation catalysts., The authors acknowledge financial support by the Spanish Government through PID2024-158871OB-I00 (funded by MCIN/AEI/10.13039/501100011033), and by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34). The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033). F. G. thanks the Ramon y Cajal program (RYC2023-044631-I) by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033). B.B. acknowledges the Spanish Government for a Severo Ochoa FPI scholarship (PRE2022-102555). L.H thanks ITQ for a contract. We thank Red Espanola de Supercomputacion (RES) for computational resources through QHS-2024-1-037 and QHS-2024-2-0015 projects, and Servei de Informatica de la Universitat de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanometric Cu-ZnO Particles Supported on N-Doped Graphitic Carbon as Catalysts for the Selective CO2 Hydrogenation to Methanol

  • Peng, Lu
  • Jurca, Bogdan
  • Parvulescu, Vasile I.
  • Dhakshinamoorthy, Amarajothi
  • García-Baldoví, Alberto
  • Tian, Liang|||0000-0002-3801-653X
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Garcia-Baldovi, Hermenegildo
[EN] The quest for efficient catalysts based on abundant elements that can promote the selective CO2 hydrogenation to green methanol still continues. Most of the reported catalysts are based on Cu/ZnO supported in inorganic oxides, with not much progress with respect to the benchmark Cu/ZnO/Al2O3 catalyst. The use of carbon supports for Cu/ZnO particles is much less explored in spite of the favorable strong metal support interaction that these doped carbons can establish. This manuscript reports the preparation of a series of Cu-ZnO@(N)C samples consisting of Cu/ZnO particles embedded within a N-doped graphitic carbon with a wide range of Cu/Zn atomic ratio. The preparation procedure relies on the transformation of chitosan, a biomass waste, into N-doped graphitic carbon by pyrolysis, which establishes a strong interaction with Cu nanoparticles (NPs) formed simultaneously by Cu2+ salt reduction during the graphitization. Zn2+ ions are subsequently added to the Cu-graphene material by impregnation. All the Cu/ZnO@(N)C samples promote methanol formation in the CO2 hydrogenation at temperatures from 200 to 300 degrees C, with the temperature increasing CO2 conversion and decreasing methanol selectivity. The best performing Cu-ZnO@(N)C sample achieves at 300 degrees C a CO2 conversion of 23% and a methanol selectivity of 21% that is among the highest reported, particularly for a carbon-based support. DFT calculations indicate the role of pyridinic N doping atoms stabilizing the Cu/ZnO NPs and supporting the formate pathway as the most likely reaction mechanism., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGeneration EU PRTR-C17.I1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Au Clusters Catalyze The Disulfide Metathesis Reaction By A Reductive Addition-Oxidative Elimination Mechanism

  • Lerma-Berlanga, Belén|||0000-0003-3686-8576
  • Francesco
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Merino, Estibaliz
[EN] A plethora of industrial and academic organic chemical reactions are catalyzed by the well-known oxidative addition-reductive elimination (OARE) mechanism. However, the micro-reversed counterpart, i. e. the reductive addition-oxidative elimination (RAOE) mechanism, has to our knowledge not been reported yet in a catalytic manner. Here we show that a gold cluster can act as homogeneous catalyst capable of triggering a reductive addition step with disulfides, manage the incoming electrons and finally execute an oxidative elimination step, to perform the disulfide metathesis reaction. These findings suggest that not only new organic reactions but also other previously reported processes catalyzed by metal clusters may operate through the RAOE mechanism.; Well-defined gold clusters are able to manage a reductive addition-oxidative elimination mechanism (the reverse of the typical redox mechanism) and catalyze the disulfide metathesis reaction with exceptional catalytic activity, and reusability. image, We thank the Ministerio de Ciencia e Innovacion Spain (MICIIN), for grant numbers PID2020-115100GB-I00, Severo Ochoa program CEX2021-001230-S, TED2021-130465B-I00 and CNS2022-135304. B. L.-B. thanks the Spanish Government (JDC2022-048323-I) and University of Valencia for a Margarita Salas contract (MS21-127). F. O. thanks ITQ, UPV-CSIC for the concession of a contract. E. M. thanks the Comunidad de Madrid Research Talent Attraction Program (grant ref. 2018-T1/IND-10054 and 2022-5A/IND-24227). We also thank Prof. Ruiz-Gonzalez and Prof. Gonzalez-Calbet from the Universidad Complutense of Madrid for performing the microscopy study. Computational resources for the DFT calculations were provided by the HERMES Cluster at the University of Zaragoza and CESGA provided by Galicia Supercomputing Center (QH-2023-2-0005).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanistic Insights Into the Photosensitizing Properties of the Topical Retinoid Tazarotene

  • Soler-Orenes, Juan Antonio
  • Dillon, Macarena-Noeli
  • Rodríguez Muñiz, Gemma María|||0000-0001-8989-2401
  • Matilde
  • Andreu, Inmaculada|||0000-0003-3409-9443
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
[EN] Since the FDA approval of tretinoin in 1971, retinoids have been key in treating acne and different skin pathologies. Tazarotene (TZE), a third-generation retinoid and prodrug, is converted in the skin to its active form, tazarotenic acid (TZA). Its structure allows absorption of UVA/UVB light, prompting concerns about potential phototoxicity, but data on the excited state properties of TZE and TZA are still lacking. This work investigates these retinoids' behavior under UVA light exposure through a combined spectroscopic, analytical, and biological approximation. The results show that both compounds form long-lived triplet excited states, which interact with oxygen to produce reactive singlet oxygen. Additionally, TZA interacts with tryptophan (Trp), leading to the formation of a photoproduct with a mass corresponding to a Trp/TZA cyclobutene adduct. These results correlate with reduced cell viability in fibroblasts exposed to light after treatment with TZE or TZA, indicating potential phototoxic effects. Such light-induced reactivity may also be related to the enhanced therapeutic results observed when TZE is used alongside narrow-band UVB phototherapy., Ministerio de Ciencia, Innovacion y Universidades (PID2021-128348NB-I00; PID2024-162272NB-I00; CEX2021-001230-S; PRE2022-105863); Generalitat Valenciana (CIGRIS/2022/091).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Opportunities of MXenes in Heterogeneous Catalysis: V2C as Aerobic Oxidation Catalyst

  • Dhakshinamoorthy, Amarajothi
  • García, Hermenegildo
  • Ramírez-Grau, Rubén
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
[EN] MXenes are two-dimensional nanomaterials having alternating sheets of one atom-thick early transition metal layer and one atom-thick carbide or nitride layer. The external surface contains termination groups, whose nature depends on the etching agent used in the preparation procedure from the MAX phase. The present concept proposes that, due to their composition, the metal-surface termination groups make MXenes particularly suited as heterogeneous catalysts for some reactions. This proposal comes from the consideration that early transition metal atoms bonded to hydroxyl and oxo groups are a general type of active sites in heterogeneous catalysis and that similar catalytic centers can also be present in the MXene structure. After having presented the concept, we have selected V2C Mxene as an example to illustrate its catalytic activity and to show how the catalytic performance varies when the surface groups are modified. As a test reaction, we selected the aerobic oxidation of indane to the corresponding indanol/indanone mixture using molecular oxygen as terminal oxidizing reagent. Two previously reported procedures to modify the surface groups, namely surface dehydroxylation by thermal treatment under diluted hydrogen flow and surface oxidation with ammonium persulfate to convert some surface groups into oxo groups were used, observing in both cases a decrease in the catalytic activity of V2C. Based on this, V-III/IV-OH are proposed as catalytic centers in this aerobic oxidation. Overall, the present concept shows the merits of MXenes in heterogeneous catalysis, based on their chemical composition and the surface functionality., Financial support by the Spanish Ministry of Science and Innovation (PDI-2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021-038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGeneration EU PRTR-C17.I1) is gratefully acknowledged. The Institute is a Center of Excellence Severo Ochoa (CEX-2021-001230-S). AD is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gate-Tailoring with Protons and Metal Cations in a Flexible Zeolite for High-Efficiency Ethylene/Ethane Separation

  • Wang, Xiaohe
  • Li, Libo
  • Yan, Nana
  • Wang, Lei
  • Liu, Puxu
  • Chu, Yueying
  • Zhou, Yida
  • Gao, Wei
  • Xu, Jun
  • Xu, Juping
  • Yin, Wen
  • Yuan, Bao
  • Wu, Zhenduo
  • Millán-Cabrera, Reisel|||0000-0002-4489-5411
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
[EN] Ethylene/ethane separation underpins global polyolefin production but remains one of the most energy-intensive processes in the chemical industry because it relies on cryogenic distillation. Adsorptive separation using porous materials offers a promising alternative to conventional cryogenic distillation, potentially reducing energy consumption. However, the nearly identical physical properties of ethylene and ethane make the development of highly selective adsorbents exceptionally challenging. Herein, we report a lithium-exchanged silicoaluminophosphate RHO zeolite (Li-SAPO-RHO) that achieves unprecedented ethylene/ethane separation by exploiting a cooperative gating mechanism in a flexible framework. A synergistic proton-Li+ gating effect at the flexible 8-ring apertures differentially modulates molecular transport barriers. Br & oslash;nsted protons selectively facilitate ethylene diffusion, while Li+ cations create a trapdoor barrier that preferentially suppresses ethane transport, thereby amplifying kinetic discrimination. As a result, Li-SAPO-RHO exhibits excellent ethylene-selective adsorption performance, enabling the direct production of polymer-grade ethylene (>99.9%) from refinery dry gas with a productivity of 238.6 mmol/L. Structural analyses combined with ab initio molecular dynamics simulations reveal how proton-cation synergy amplifies kinetic discrimination between closely related molecules. These findings establish gate cooperativity as a powerful design principle for energy-efficient adsorptive separations. Due to its low cost, exceptional hydrothermal stability, and excellent cycling performance, Li-SAPO-RHO offers a promising platform for industrial light-olefin separations., This work was supported by the National Natural Science Foundation of China (22288101, 21920102005, 21972136, 22278287, 22372156, 21972136, 22102177, 22008108), the "111 Center" (B17020), the Scientific and Technological Innovation Project of Changbaishan Laboratory, Jilin Province (CBS2025002-02), the Liaoning Revitalization Talents Program (XLYC2203179), the Spanish Ministry of Science and Innovation (CEX2021-001230-S, PID2024-158871OB-I00), Generalitat Valenciana (CIPROM/2023/34) and the Natural Science Foundation of Jiangsu Province (BK20200681). Red Espanola de Supercomputacion (RES) and Servei d'Informatica de la Universitat de Valencia (SIUV) are acknowledged for computational resources and technical support. We thank Dr. P. Bai from Luoyang Jalon Micronano New Materials Co., Ltd, C. Nie and F. He from Dalian Institute of Chemical Physics, and Dr. M. Hu from Wuhan Institute of Physics and Mathematics for helpful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unlocking the Role of C Doping in a RuO2 Matrix in CO2 Methanation from a Combined Theoretical and Experimental Approach

  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Gómez-Acosta, Daviel|||0000-0003-0010-4507
  • Tebar-Soler, Carmen|||0000-0001-7054-4503
  • Royo de Larios, Alvaro
[EN] A new type of ruthenium-based catalyst, labeled RuO x C y @C, consisting of a combination of metallic ruthenium (Ru0), ruthenium oxide (RuO2), and a ruthenium oxycarbonate phase (RuO2C y ) formed by interstitial carbon doped into RuO2, has been recently reported for low-temperature CO2 methanation. Its catalytic activity and long-term stability depend on two competing processes that take place under reaction conditions: RuO2 reduction with H2 to form inactive Ru0 nanoparticles, and C diffusion into RuO2 to form the active oxycarbonate phase. A combination of experimental and computational techniques is applied in this work to investigate the relative rate of both processes in order to identify possible modifications in the catalyst composition that might improve the overall catalytic performance., This work has been supported by the Spanish Government through TED2021-130739B-I00, funded by MCIN/AEI/10.13039/501100011033/EU/PRTR, and by Generalitat Valenciana (GVA) through the Prometeo Program (CIPROM/2023/34). Ministerio de Ciencia, Innovacion y Universidades, grant number PID2021-1262350B-C31, and Generalitat Valenciana (GVA), grant number CIAICO/2021/2138. This study forms part of the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.11) and Generalitat Valenciana (ref MFA/2022/016 and TED2021-130756B-C32). The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033). D.G. thanks the Marie-Curie Postdoctoral (MSCA) Fellowship ID 101154019. A.R.D.L. thanks the Predoctoral Fellowship MMT24-ITQ-01-01 (NextGenerationEU). We thank Red Espanola de Supercomputacion (RES) for computational resources.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Resolving Complex K-Pt-Sn Interactions in PtSn@K-MFI Catalysts for Alkane Dehydrogenation

  • Martínez-Gómez-Aldaraví, Adrián|||0009-0007-1928-8277
  • Millán-Cabrera, Reisel|||0000-0002-4489-5411
  • Vidal Moya, José Alejandro
  • Martínez, Cristina|||0000-0002-4415-084X
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Serna Merino, Pedro Manuel
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Millet Roig, Isabel
  • Alos Marti, Aroa
  • Meyer, Randall
[EN] K and Sn contents were rationalized during the synthesis of PtSn@K-MFI to maximize metal dispersion and stability along the MFI crystallites. Experimental results and theoretical calculations reveal a stoichiometry of similar to 1 K per unit cell of MFI, limiting then the final K incorporation within siliceous MFI crystals at similar to 0.7 wt %. Above this stoichiometry, K is not incorporated into the final solids unless significant amounts of Sn are simultaneously present, leading to the formation of tin-silicate precipitates. The optimized PtSn@K-MFI catalysts improve the catalytic performance of well-established references, as PtSn/SiO2, for the propane dehydration (PDH) reaction. In particular, low Sn loadings (below 0.5 wt %) result in higher time-on-stream (TOS) deactivation catalytic profiles but excellent regenarability after consecutive PDH reaction, while higher Sn content (close to 1 wt %) minimizes TOS deactivation due to the maximization of Pt-Sn bonds but consecutive regenerations result in significant metal sintering. Increasing Sn contents within MFI crystallites facilitates Pt sintering and, thus, occurring catalyst deactivation upon regeneration cycles. As a result of complex interconnected nucleation/crystallization processes, fine-tuning rationalizations of one-pot synthesis approaches can substantially influence the final atomic and subnanometric metal interactions and, consequently, the catalytic and sintering-resistance properties when exposed to highly demanding industrial conditions., The authors acknowledge financial support by ExxonMobil, by the Spanish Government through PID2021-122755OB-I00 (funded by MCIN/AEI/10.13039/501100011033) and TED2021-130739B-I00 (funded by MCIN/AEI/10.13039/501100011033/EU/PRTR), and by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34). The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033). AMGA acknowledges the Spanish Government for a Severo Ochoa FPI scholarship (PRE2019-088361). The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization. The XAS results were collected under the PUP-309462 carried out at the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-AC02-98CH10886. RJM and PSM thank Eli Stavitski, Denis Leshchev, and Dominik Wierzbicki for their support at the ISS beamline at NSLS-II. RJM and PSM also thank Corey Kaminsky and Alyssa Love of ExxonMobil for their help with the collection of the XAS data.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

AG5 is a potent non-steroidal anti-inflammatory and immune regulator that preserves innate immunity

  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
  • Rivero-Buceta, Eva María
  • VIDAURRE-AGUT, CARLA
  • Lama, Raquel
  • Rey-Campos, Magalí
  • Moreno, Alejandro
  • Mendoza, Laura
  • Mingo-Casas, Patricia
  • Escribano-Romero, Estela
  • Gutiérrez-Adán, Alfonso
  • Saiz, Juan Carlos
  • Smerdou, Cristian
  • Gonzalez, Gloria
  • Prósper, Felipe
  • Argemí, Josepmaría
  • San Miguel, Jesus
  • Sánchez Cordón, Pedro J.
  • Figueras, Antonio
  • Quesada-Gómez, Jose Manuel
  • Novoa, Beatriz
  • Montoya, María
  • Martín-Acebes, Miguel A.
  • Pineda-Lucena, Antonio
  • Benlloch Babiera, José María
[EN] An archetypal anti-inflammatory compound against cytokine storm would inhibit it without suppressing the innate immune response. AG5, an anti-inflammatory compound, has been developed as synthetic derivative of andrographolide, which is highly absorbable and presents low toxicity. We found that the mechanism of action of AG5 is through the inhibition of caspase-1. Interestingly, we show with in vitro generated human monocyte derived dendritic cells that AG5 preserves innate immune response. AG5 minimizes inflammatory response in a mouse model of lipopolysaccharide (LPS)-induced lung injury and exhibits in vivo anti-inflammatory efficacy in the SARS-CoV-2-infected mouse model. AG5 opens up a new class of anti-inflammatories, since contrary to NSAIDs, AG5 is able to inhibit the cytokine storm, like dexamethasone, but, unlike corticosteroids, preserves adequately the innate immunity. This is critical at the early stages of any naïve infection, but particularly in SARS-CoV-2 infections. Furthermore, AG5 showed interesting antiviral activity against SARS-CoV-2 in humanized mice., This work has been supported by NextGenerationEU Recovery and Resilience Facility (RRF) through the PTI+ Global Health Platform of Spanish National Research Council, grants SGL2103023 (PBA), SGL2103053 (MMA) and SGL2103015 (MM); by Spanish National Research Council through the program Ayudas extraodinarias a proyectos de investigacion en el marco de las medidas urgentes extraodinarias para hacer frente al impacto economico ¿ y social del COVID19 , grants CSIC-COV19-093 (PBA) and CSIC-COV19-117 (MM); by Generalitat Valenciana through the program Ayudas urgentes para proyectos de investigacion, ¿ desarrollo tecnologico ¿ e innovacion ¿ (I+D+i) por la COVID-19 , grant GVA-COVID19/2021/059 (PBA); by the Conference of Rectors of the Spanish Universities, Spanish National Research Council and Banco Santander through the FONDO SUPERA COVID-19, grant CAPriCORn (JSM, JMB); by Severo Ochoa center of excellence program (grant CEX2021-001230-S) (PBA).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave-Driven Reduction Accelerates Oxygen Exchange in Perovskite Oxides

  • Domínguez-Saldaña, Aitor|||0000-0001-7539-7493
  • Carrillo-Del Teso, Alfonso Juan
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Santos-Blasco, Joaquín
  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Plaza González, Pedro José|||0000-0002-2623-0782
  • Gutiérrez Cano, José Daniel
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Navarrete, Laura
  • Catalán-Martínez, David
[EN] Microwave-assisted oxide reduction has emerged as a promising method to electrify chemical looping processes for renewable hydrogen production. Moreover, these thermochemical cycles can be used for thermochemical air separation, electrifying the O-2 generation by applying microwaves in the reduction step. This approach offers an alternative to conventional cryogenic air separation, producing pure streams of O-2 and N-2. The electrification by microwaves lowers the requirements for titanate perovskites (CaTi1-xMnxO3-delta), which typically demand high temperatures for thermochemical cycles. Microwave activation allows for a drastic reduction in the operation conditions of the reduction reaction, leading to unprecedentedly rapid absorption-desorption cycles (<3 min per cycle). For CaTi0.8Mn0.2O3-delta, we achieved a cycle-averaged O-2 production of 2.6 mL g(-1) min(-1) at 800 degrees C, surpassing conventional values of materials operating in the high-temperature regime. This method could significantly impact thermochemical air separation by enabling a faster oxygen absorption-desorption cycle at more moderate temperatures than those of conventionally heated processes., This study forms part of the MFA program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (CIPROM/2022/10). Financial support by the Spanish Ministry of Science and Innovation (PID2022-139663OB-100 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033 and "Ramon y Cajal" Fellowship RYC2021-033889-I) and the Universitat Politecnica de Valencia (UPV) is gratefully acknowledged. Also, we acknowledge the support of the Servicio de Microscopia Electronica of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Time-resolved control of nanoparticle integration in titanium-organic frameworks for enhanced catalytic performance

  • Carmen Fernández-Conde
  • Zheng, Yongkun
  • Antonio Ribera
  • Marti-Gastaldo, Carlos
  • Mon-Conejero, Marta|||0000-0002-1983-1096
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] Among the multiple applications of metal¿organic frameworks (MOFs), their use as a porous platform for the support of metallic nanoparticles stands out for the possibility of integrating a good anchorage, that improves the stability of the catalyst, with the presence of a porous network that allows the diffusion of substrates and products. Here we introduce an alternative way to control the injection of Au nanoparticles at variable stages of nucleation of a titanium(IV) MOF crystal (MUV-10). This allows the analysis of the different modes of nanoparticle integration into the porous matrix as a function of the crystal formation stage and their correlation with the catalytic performance of the resulting composite. Our results reveal a direct effect of the stage at which the Au nanoparticles are integrated into MUV-10 crystals not only on their catalytic activity for the cyclotrimerization of propargyl esters and the hydrochlorination of alkynes, but also on the selectivity and recyclability of the final solid catalyst, which are far superior than those reported for the same reactions with TiO2 supports., This work was supported by the EU (ERC-2021-COG101043428), the Generalitat Valenciana (PROMETEU-2021-054 & MFA/2022/026) and the Spanish government (CEX2019- 000919-M, PID2020-118117RB-I00, CEX2021-001230-S and PID2020-115100GB-I00). This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat Valenciana. M. M. thanks MICIIN for a contract under the Juan de la Cierva program (FJC2019-040523-I) and Y. Z. thanks the China Scholarship Council (CSC No. 202009350009) for a PhD fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Intracrystalline Silanol Defects on the Diffusivity of Benzene in Silicalite Zeolite

  • Misturini, Alechania
  • Kariminasab, Sara
  • Altundal, Ömer Faruk
  • García-Aznar, Pablo|||0000-0003-0586-0037
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] Intracrystalline zeolite silanol defect groups (& EQUIV;SiOH) were modelled in silicalite (silica ZSM-5, MFI) using experimental data. We make a molecular dynamics study on the self-diffusivity of benzene in silicalite with defects. The simulations at three different loadings (1, 3 and 5 benzene per unit cell) and temperatures (298, 348 and 398 K) allow to calculate self-diffusivity, adsorption energy and the activation energy. The results show that benzene self-diffusivity in silicalite is increased by the presence of silanol defects. Previous experimental results support this claim., This work was supported by Generalitat Valenciana predoctoral fellowship GRISOLIAP/2019/084. We also thank Generalitat Valenciana for funding through PROMETEO/2021/077 project and CESGA for the use of computational facilities. Financial support by the Ministry of Science and Innovation (MICINN) of Spain through project CEX2021-001230-S (10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evidences of the Stabilization for Weeks of the Benzyl Cation in Zeolites

  • Francesco
  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] The benzyl cation is an iconic intermediate in organic chemistrywhich has not been isolated yet. Here, we show that the incorpo-ration of tropylium cations in commercially available sodium zeo-lites, after cation exchange, plausibly triggers the spontaneousformation of benzyl cations inside the zeolite pores at room tem-perature. The zeolite plays a bifunctional role as a host. First, theunimolecular rearrangement reaction occurs by the ability of thezeolite to isolate tropylium molecules and achieve the requiredenergy to transform tropylium into benzyl cations. Then, the com-partmentalized nature of the zeolite framework avoids the quench-ing of the so¿formed benzyl cations with each other, or any othernucleophile, allowing lifetimes of weeks for the benzyl cationsunder ambient conditions. In this way, a customary organic char-acterization of the zeolite¿embedded benzyl cation by absorptionultraviolet¿visible spectrophotometry and 13C nuclear magneticresonance (13C NMR) has now been possible. Transient absorptionspectroscopy and reactivity studies, together with moleculardynamic calculations, further support the formation of the benzylcation inside the zeolite. These results bring this fundamental car-bocation intermediate to our laboratories as a manageable organiccompound., This work is part of the project PID2023 148441NB I00 andPID2023 148367OB I00 funded by MICIIN (Spain). Thanks are alsoextended to the Severo Ochoa Centre of Excellence Program(CEX2021 001230 S). F.O. thanks MICIIN and NextGenerationEUfrom a contract under the TED2021 130465B I00 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of the stability of LTA zeolites under natural gas drying TSA conditions

  • Moura, P.A.S.
  • Ferracine, E.D.S.
  • Rodríguez-Aguado, E.
  • Maia, D.A.S.
  • Melo, D. C.
  • Cardoso, D.
  • Bastos-Neto, M.
  • Rodríguez-Castellón, E.
  • Azevedo, D.C.S.
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The main features in cationic LTA zeolites that are likely to impact its potential hydrothermal stability are interconnected. The Al content and the compensating cation play an important role in the water adsorption but their influence on the zeolite performance in thermal cycles is yet to be understood. In this study, four LTA zeolite samples were synthetized with distinct Si/Al ratios in sodium and potassium forms. They underwent a Premature Aging Protocol (PAP) that took into account the operating conditions typically found in temperature swing adsorption processes. The Si/Al ratio per se did not impact in the crystallinity upon aging, but the presence of a high amount of potassium cations (Si/Al = 1) led to the amorphization of the zeolite structure. The results from XPS and NMR techniques indicate the Al migration from the outer surface to the inner cages occurs upon aging. Chemical analysis by XRF and ICP-OES associated with 27Al NMR analysis reveal that the presence of EFAl is particularly significant in the sample with the largest Si/Al ratio (5) and is correlated to a much larger C deposition upon aging. TG/DTG and TPD-NH3 experiments suggest that acid sites in the zeolite structures act as a double-edged sword, by enhancing water adsorption while also leading to carbon accumulation. CO2 isotherms at 0 oC reveal the reduction of the microporosity after aging, whereas the Al content is proportional to the water adsorption uptake, particularly at low pressures (below 10 mbar). The material with an intermediate Si/Al ratio and in Na-form (LTAc-SiAl2-Na) combines excellent hydrothermal stability with a high-water affinity and uptake., The authors acknowledge financial support from Petrobras (Brazil) project 2018/00130-5, CAPES (Brazil), particularly in the frame of project CAPES/Print 88887.311867/2018-00 and Servicios Centrales de Apoyo a la Investigacion - SCAI. S.V. and F. R. acknowledge financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033 and TED2021-130191B-C41 and TED2021-130756B-C31 grants funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR). Authors thank also the financial support by the Generalitat Valenciana (Prometeo 2021/077). This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047 and MFA/2022/012).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Noble metal nanoparticles and their nanoalloys supported on carbon catalyze the chain-walking isomerization of terminal linear alkenes

  • Bacic, Matea
  • Ballesteros-Soberanas, Jordi
  • Manzorro, Ramón
  • Martin-Diaconescu, Vlad
  • Martínez-Castelló, Aaron
  • Hernández-Garrido, Juan Carlos
  • Lerma-Berlanga, Belén|||0000-0003-3686-8576
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] The chain-walking reaction of terminal alkenes is the simplest method to obtain internal alkenes. However, research during recent years has focused mainly on homogeneous rather than heterogeneous (solid) catalysts. A systematic study with different noble metal nanoparticles (Ru, Pd, Pt and Au) and their nanoalloys (RuPt and PdAu), supported on carbon, as catalysts for the isomerization reaction of terminal linear-chain alkenes, from 1-butene to 1-decene, was undertaken. The less expensive metal Ru could outperform the remainder of the noble metals (Pd, Pt and Au) in batch and flow systems. RuPt and PdAu nanoalloys were more active than the monometallic catalyst under specific reaction conditions. The reaction was scaled up to 2 kg in the liquid phase., This work is part of the project PID2023-148441NB-I00 funded by MCIN/AEI/10.13039/501100011033MICIIN (Spain). Financial support by Severo Ochoa Centre of Excellence Program (CEX2021-001230-S) is gratefully acknowledged. Financial support of the Spanish projects Juan de la Cierva and Ramon y Cajal program, contract numbers JDC2022-048323-I and RyC2022-036154-I, respectively (all funded by MCIINN, the former by MCIN/AEI/10.13039/501100011033MICIIN) is also acknowledged. M. B. thanks ITQ for a contract. J. B.-S. thanks La Caixa Foundation grant (ID 100010434), code LCF/BQ/ DI19/11730029. R. M. thanks support from national project PID2022-142312NB-I00 funded by MCIN/AEI/10.13039/ 501100011033/and from Programa Operativo FEDER Andaluc¿&#305;a 2021 2027 and Consejer¿&#305;a de Universidad, Investigaci¿on e Innovaci¿on, Junta de Andaluc¿&#305;a (Proyecto FEDERUCA-A1_31). Some electron microscopy studies were performed at the DME-UCA node of the Spanish Unique Infrastructure (ICTS) on Electron Microscopy of Materials (ELECMI). XAS experiments were performed at the ALBA Synchrotron (BL22 CLÆSS) with the collaboration of ALBA staff as part of experiment 2024068490.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Molten Salt Derived MXenes: Synthesis and Applications

  • Kruger, Dawid Daniël
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
[EN] About one decade after the first report on MXenes, these 2D early transition metal carbides or nitrides have become among the best-performing materials in electrode applications related to electrical energy storage devices and power-to-fuels conversion. MXenes are obtained by a top-down approach starting from the appropriate 3D MAX phase that undergoes etching of the A-site metal. Initial etching procedures are based on the use of concentrated HF or the in situ generation of this highly corrosive and poisonous reagent. Etching of the MAX phase is one of the major hurdles limiting the progress of the field. The present review summarizes an alternative, universal, and easily scalable etching procedure based on treating the MAX precursor with a Lewis acid molten salt. The review starts with presenting the current state of the art of the molten salt etching procedure to obtain or modify MXene, followed by a summary of the applications of these MXene samples. The aim of the review is to show the versatility and advantages of molten salt etching in terms of general applicability, control of the surface terminal groups, and uniform deposition of metal nanoparticles, among other features of the procedure., This work was financially support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optoelectronic properties of octahedral molybdenum cluster-based materials at a single crystal level

  • Segura-Sanchis, Elena
  • Moreno Muñoz, Ana
  • RAMIRO MANZANO, FERNANDO
  • Fenollosa Esteve, Roberto|||0000-0003-2758-9823
  • Feliz Rodriguez, Marta|||0000-0002-4429-0551
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
[EN] The determination of the photocurrent and photoluminescence properties of single crystals composed by an H-bonded network of hydroxo Mo6X8 (X = Br, Cl) clusters, makes these materials promising in optoelectronics, sensing and photocatalysis., We would like to thank the technical team at the Instituto de Tecnologia Quimica for providing us all the facilities for all the characterization processes. This research was supported by the project PID2021-123163OB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER A way of making Europe and Severo Ochoa Centre of Excellence Program (CEX2021-001230-S). F. R. M. acknowledges CSIC under the program: Ayudaspara la incorporacion de nuevos Cientificos Titulares (Grant No. 202280I200).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cooperativity between atoms in supported Single-Atom Catalysts and metal clusters

  • Serna Merino, Pedro Manuel
[EN] Highlights ¿ Cooperativity and electron-transfer between metals and supports are key phenomena to understand the performance of SACs and small metal clusters. ¿ Single-atom catalysts often require the support to actively participate in the reaction to achieve optimal catalytic performance. ¿ Small amounts of metal clusters could be contributing to the catalysis by SACs. ¿ SACs and metal clusters often show unique opportunities in terms of catalytic selectivity. ¿ The high mobility of supported clusters and SACs makes operando work crucial., Author acknowledges financial support by the Spanish Government through PID2021-122755OB-I00 funded by MCIN/AEI/10.13039/501100011033 and TED2021-130739B-I00 funded by MCIN/AEI/10.13039/501100011033/EU/PRTR. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient CO2 and H2O Co-Electrolysis in a BaZr0.44Ce0.36Y0.2O3o-Based Proton Ceramic Electrochemical Reactor with BaGd0.8La0.2Co2O6-o Steam Electrodes

  • Barrio-Querol, Elena
  • Leonard, Kwati
  • Matsumoto, Hiroshige
  • Quina-García, Imanol
  • Fabuel Robledo, Maria
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Almar-Liante, Laura|||0000-0001-5103-3812
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
[EN] Despite the increasing use of electrification and efforts to decarbonize processes, hydrocarbons remain indispensable for heavy transport and chemistry sectors. Electrochemical devices powered by renewable energy offer a promising strategy to convert CO2 into sustainable molecules that can be used as fuels and chemical feedstocks. In this study, we investigate the electrochemical performance of BaGd0.8La0.2Co2O6-delta as a steam or oxygen electrode in a proton ceramic electrolysis cell. Two composite materials were evaluated as electrode candidates, consisting of BaGd0.8La0.2Co2O6-delta (BGLC) combined with either BaZr0.4Ce0.4Y0.1Yb0.1O3-delta (BZCYYb4411) or BaZr0.5Ce0.3Y0.2O3-delta (BZCY532). The electrodes were characterized using electrochemical impedance spectroscopy (EIS) on symmetrical cells under various oxidizing conditions and temperatures. Based on this analysis, the BGLC-BZCYYb4411 electrode was selected as the steam electrode in a full PCER configuration, composed of Ni-SrZr0.5Ce0.4Y0.1O2.95 (SZCY541) as the fuel/CO2 electrode and BaZr0.44Ce0.36Y0.2O3-delta as the electrolyte. The cell was evaluated for co-electrolysis of H2O and CO2. The results illustrate the potential of the BGLC-based electrodes and BZCY-based electrolytes for efficient CO2 upgrading and steam electrolysis in a single-step process., This study has received European Union Horizon 2020 Research and Innovation funding under Grant 838077 (Project eCOCO2). Financial support from the Spanish Government (Grant CEX2021-001230-S funded by MCIN/AEI/10.13039/501100011033, TED2021-132590B-C21, PRE2019-088857) and the Generalitat Valenciana (Grant CIACIF/2021/199) is also acknowledged. The authors acknowledge the support of the Servicio de Microscopia Electronica of the Universitat Politecnica de Valencia (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Room temperature design of Ce(IV)-MOFs: from photocatalytic HER and OER to overall water splitting under simulated sunlight irradiation

  • Dai, Shan
  • Montero-Lanzuela, Eva
  • Tissot, Antoine
  • Serre, C.
  • Garcia-Baldovi, Hermenegildo
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] The development of MOF-based efficient and reusable catalysts for hydrogen production under simulated sunlight irradiation, especially through overall water splitting, remains challenging. This is mainly due to either the inappropriate optical features or poor chemical stability of the given MOFs. Room temperature synthesis (RTS) of tetravalent MOFs is a promising strategy to design robust MOFs and their related (nano)composites. By employing these mild conditions, herein, we report for the first time that RTS leads to the efficient formation of highly redox active Ce(IV)-MOFs that are inaccessible at elevated temperatures. Consequently, not only highly crystalline Ce-UiO-66-NH2 is synthesized, but also many other derivatives and topologies (8 and 6-connected phases) without compromise in space-time yield. Their photocatalytic HER and OER activities under simulated sunlight irradiation are in good agreement with their energy level band diagrams: Ce-UiO-66-NH2 and Ce-UiO-66-NO2 are the most active photocatalysts for the HER and OER, respectively, with a higher activity than other metal-based UiOtype MOFs. Combining Ce-UiO-66-NH2 with supported Pt NPs results finally in one of the most active and reusable photocatalysts for overall water splitting into H2 and O2 under simulated sunlight irradiation, due to its efficient photoinduced charge separation evidenced by laser flash photolysis and photoluminescence spectroscopies., S. D. thanks the &#57603;nancial support from CSC grant (grant number 201706140196). The authors appreciate the help of Dr S. Nandi and Dr G. Mouchaham for water isotherms measurements. S. N. appreciates the support from Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , by the European Union and from grant FPU20/03140 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ESF Investing in your future or by European Union NextGenerationEU/PRTR . Ministry of Innovation and Science (Severo Ochoa CEX2021-001230-S and RTI2018-89237-CO2-1, both funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021-38) are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cyclododecene isomeric separation by (supported) rhodium(i)-catalysed selective dehydrogenative borylation reaction

  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Singh, Amravati S.
[EN] Cyclododecene, commercially available as a cis/trans mixture, reacts with dipinacolborane (BPin)(2) only through the cis isomer, during the Rh(i)-XantPhos-catalyzed dehydrogenative monoborylation reaction, leaving the starting trans-cyclododecene untouched. In this way, both diastereoisomers can now be easily separated. The catalytic Rh(i)-phosphine complex progressively degrades under the reaction conditions; thus we also present here a cheap, ligandless Rh(i)-supported zeolite NaY catalyst, equally selective for the dehydrogenative monoborylation reaction. These results provide a new methodology for macrocyclic alkene diastereoisomeric separation., Financial support by the projects PID2020-115100GB-I00 (funded by Spanish MCIINN, MCIN/AEI/10.13039/501100011033MICIIN) and Severo Ochoa centre of excellence program (CEX2021-001230-S, also from MCIINN) is acknowledged. A. S. S. thanks ITQ for the concession of a contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Promotion of mixed protonic-electronic transport in La5.4WO11.1-d membranes under H2S atmospheres

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Toldrá-Reig, Fidel|||0000-0001-6133-7043
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
  • Somacescu, S.
  • Gerhards, U.
  • Aguadero, A.
  • Haas-Santo, K.
  • Dittmeyer, R.
[EN] Catalytic membrane reactors (CMR) based on H-2-separation membranes can improve the performance of thermodynamically-limited reactions such as high-pressure steam methane reforming, ammonia cracking, non-oxidative aromatics production, and water gas shift reaction (WGS). In these industrial processes, the membrane surfaces are typically exposed to steam, CO2, CO, H2S, and hydrocarbons in combination with high temperatures. Therefore, the membrane materials require long-term thermo-chemical stability under the mentioned conditions. Stability in H2S is of outstanding importance since its presence, even at ppm level, gives rise to substantial surface poisoning and decomposition of most materials. Here we characterize the influence of H2S on the crystalline structure, lattice composition, and hydrogen-transport properties of La5.4WO11.1-& delta;, one of the reference protonic membrane materials. The incorporation of sulfide ions in the crystal lattice is ascertained from XRD, XPS, FESEM, WDS, EDS, and FIB-SIMS analyses. UV-vis spectroscopy and EIS measurements illustrate the effect of the incorporated sulfur in the transport properties, i.e., vigorously promoting the electronic conductivity mediated by the concurrent partial reduction of tungsten cations (W6+). The rise in electronic conductivity allowed an H-2 flux of 0.042 mL cm(-2) min(-1) to be reached at 700 & DEG;C for a & SIM;700 & mu;m-thick membrane, in contrast with negligible H-2 permeation in H2S-free conditions., This work was financially supported by the Spanish Government (RTI2018-102161, IJCI-2016-28330, IJCI-2017-34110, FPU13/03478 and CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) and by MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transicion Energetica Sostenible+ (PTI-TRANSENER+).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

HY zeolite catalyzes the ortho-methylation of 1-naphthol

  • Bacic, Matea
  • Tejeda-Serrano, Maria
  • Zheng, Yongkun
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] The selective ortho-alkylation of 1-naphthol with methanol is carried out over various commercially available acid solid catalysts under relatively mild reaction conditions (<300 degrees C), in batch, and anhydrous zeolite HY shows the best catalytic activity. Removal of the strongly adsorbed water in the zeolite is key for the alkylation reaction. Mechanistic studies based on isotopically labelled experiments reveal the transformation of O-methylated 1-naphthol into the desired ortho-C-methylation product after intramolecular rearrangement of the methyl group. These results open the way to design a new synthesis of ortho-methyl 1-naphthol and, consequently, of vitamin K3, based on a commercially available, inexpensive and non-toxic solid catalyst such as HY zeolite., Financial support of the Spanish projects PID2020-115100GB-I00, CEX2021-001230-S and Ramon y Cajal program contract number RyC2022-036154-I (all funded by MCIINN, the former by MCIN/AEI/10.13039/501100011033MICIIN) is acknowledged. Y.Z. thanks the China Scholarship Council (CSC No. 202009350009) for a Ph.D. fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MXenes as Heterogeneous Thermal Catalysts: Regioselective Anti-Markovnikov Hydroamination of Terminal Alkynes with 10 2 h-1 Turnover Frequencies

  • Ramírez-Grau, Rubén
  • García-Aznar, Pablo|||0000-0003-0586-0037
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Pavel, Octavian
  • Tirsoaga, Alina
  • Cojocaru, Bogdan
  • Popescu, Dana Georgeta
  • Parvulescu, Vasile I.
[EN] Due to their conductive properties and optoelectronic tunability, MXenes have revolutionized the area of electrocatalysis and active materials in supercapacitors. In comparison, there are only a few reports on MXenes as thermal catalysts for general organic reactions. Herein, the unprecedented catalytic activity of Ti3C2 MXene for the hydroamination of alkynes is reported, overcoming the limitations of poor activity, lack of selectivity, and stability, which are generally encountered in the solid catalysts known so far. In the case of Ti3C2, hydroamination exhibits almost complete selectivity for the anti-Markovnikov regioisomer, for both aliphatic amines and less-reactive aromatic amines. Ti3C2 also efficiently catalyzes intramolecular hydroamination, leading to the formation of indol heterocycles. The catalytic hydroamination of C-C multiple bonds is a reaction with complete atom efficiency that may form C-N bonds from convenient reagents. The maximum number of hydroamination sites on the Ti3C2 nanosheets is quantified by thermoprogrammed NH3 desorption. The measured TOF values are on the order of 102 h-1, with the highest TOF value being 350 h-1 for 1-hexyne hydroamination by n -butylamine. Therefore, Ti3C2 is among the few heterogeneous hydroamination catalysts studied, with its activity per site being comparable to the best hydroamination catalysts reported so far. Density functional theory calculations on the models indicate the cooperation of neighboring Ti atoms in the mechanism. Considering the compositional and structural versatility of MXenes, the present findings open the door for further application of MXenes in other general organic reactions., Financial support was provided by UEFISCD, Ministry of Innovation and Science (Severo Ochoa CEX2021-001230-S and PDI2021-0126071-OB-CO2, both funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021-38 and Advanced Materials Programme Graphica MFA/2022/023 with funding from the European Union NextGenerationEU PRTR-C17.I1) are gratefully acknowledged. This study forms part of the Advanced Materials programme and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. We thank CTI-CSIC and ASIC-UPV for their computational facilities. R.R.-G. and P. G.-A. are recipients of postgraduate scholarships awarded by the Spanish Ministry of Science and Innovation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Capturing Different Intermediate Phases during Zeolite Synthesis

  • Zeng, Jinjin
  • Hong, Suk Bong
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
[EN] Despite extensive efforts over the past several decades, the current mechanistic understanding of zeolite crystallization is still far from satisfactory, thus precluding the synthesis of designer zeolites. Here we show that the nucleation and in situ transformation pathways during the synthesis of medium-pore zeolite TNU-9 can be altered by controlling the extent of cooperative structure direction between Na+ and Cs+ ions in the presence of 1,4-bis(N-methylpyrrolidinium)butane cations as an organic structure-directing agent. The intermediate phase selectivity was found to change from bikitaite to analcime to layered MCM-22 precursor when the gel Na/Cs ratio was adjusted to 7, 15, and 20, respectively. We also show that the transformation of bikitaite into TNU-9 begins at the surface of intermediate crystals, unlike that of analcime and MCM-22 precursor by a dissolution-recrystallization process. The force field simulation results suggest that the nucleation of different intermediate phases is not thermodynamically but kinetically controlled. This study provides a new basis for advancing the fundamental understanding of zeolite crystallization pathways., We acknowledge financial support from the National Research Foundation of Korea (2021R1A3A-3088711), GVA (PROMETEO/2021/077), MCIN (Severo Ochoa CEX-2021-001230-S), ASIC-UPV, and SGAI-CSIC for the use of computational facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced CO2 separation via molten-carbonate membranes with freeze-cast, porous ceramic supports

  • Tsochataridou, S.
  • Papaioannou, E.I.
  • Mutch, G. A.
  • Gaudillere, C.
  • Metcalfe, I. S.
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Molten-carbonate membranes with freeze-cast, porous ceramic supports were fabricated and tested for high temperature CO2 separation. The freeze-casting fabrication method resulted in highly porous and hierarchically organized ceramic supports. The versatility of the freeze-casting method was demonstrated by fabricating ionic (oxide-ion) and mixed ionic-electronic conducting membrane supports, namely, La0.58Sr0.4Fe0.8Co0.2O3-delta (LSFC), Ce0.8Gd0.2O1.9 (CGO) and Y0.2Zr0.8O1.9 (YSZ). The resulting membranes showed very high CO2 permeance, achieving maximum values of similar to 1.5 x 10(-7)mol Pa-2 s(-2) m(-2) at 850 degrees C. The gas permeation results demonstrated that the pore microstructure resulting from freeze-casting provides higher CO2 permeances than membranes fabricated from the same materials, but using other fabrication methods, in the literature., Additional metadata are available at: 10.25405/data.ncl.12443531. For the purpose of open access, the author has applied a Creative Commons Attribution (CC BY) licence to any Author Accepted Manu-script version arising from this submission. The research leading to these results has received funding from the European Research Council under the European Union's Seventh Framework Program (FP/2007-2013) /ERC Grant Agreement Number 320725. This work was supported by the Engineering & Physical Sciences Research Council [grant numbers EP/P009050/1, EP/P007767/1, EP/M01486X/1, EP/V047078/1, EP/W03395X/1, EP/Y034961/1] , the Spanish Government (PID2022-139663OB-100 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (CIPROM/2022/10 grant) . ST thanks EPSRC for the funding of a PhD studentship. GAM was supported by the Royal Academy of Engineering under the Research Fellowship scheme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cascade process for the selective conversion of 5-Hydroxymethylfurfural (HMF) into furan diamines using potassium-doped Ru/C catalyst: Application in gemini surfactant production

  • Hurtado-Cebrián, Beatriz
  • Arias, Karen S.|||0000-0001-5649-7392
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Furan diamines, precursors to ammonium salt gemini surfactants, were synthesized via a one-pot cascade process starting from hydroxymethylfurfural (HMF) and primary amines. The cascade process involves the selective oxidation of HMF to diformylfuran, followed by reductive amination with the amine, using potassium-doped Ru/ C as the sole catalyst. This catalytic system exhibited a turnover frequency (TOF) four times higher than the non-promoted Ru/C catalyst. Temperature-programmed desorption of hydrogen (TPD-H2) experiments revealed that the promoted catalyst had weaker Ru-H interactions compared to the unpromoted system, which enhanced the availability of H species. The catalyst is highly stable and presents a wide scope. Finally, methylation of secondary furan diamines derived from fatty amines resulted in the formation of bis-quaternary ammonium salt gemini surfactants, which exhibited a critical micelle concentration (CMC) in the micromolar range., This work has been funded by the Spanish Ministry of Science and Innovation through the "Severo Ochoa Program" (CEX-2021-001230-S) and the PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by "ERDF A way of making Europe project. B.H. thanks the Severo Ochoa program for predoctoral fellowships. The authors also thank Microscopy Service of UPV for the TEM measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rational design of Ni-sepiolite catalysts: Impact of incorporation method and metal loading on CO2 methanation efficiency

  • Machado-Da Silva, Raúl Bruno
  • Chica, Antonio
  • Cerdá-Moreno, Cristina
[EN] The influence of Ni incorporation methods and metal loading on sepiolite-based catalysts for the CO2 methanation reaction was investigated. Catalysts synthesized via precipitation exhibited a Ni phase strongly interacting with a partially folded sepiolite structure, as revealed by 29Si-NMR and TPR analyses, distinct from those obtained by incipient wetness impregnation. The precipitation method resulted in catalysts with enhanced reducibility and a fourfold increase in Ni0 surface area, as confirmed by XPS and H2-chemisorption measurements, which correlated with higher CO2 conversion and CH4 selectivity observed. Among the precipitation-based catalysts, the one with 20 wt% Ni loading exhibited the optimal balance between Ni0 surface area (13.6 m2 gCAT-1 ) and catalytic performance (0.233 mol CH4 gCAT-1 h-1, at 400 degrees C). Stability tests demonstrated that this catalyst maintained a steady CH4 yield over 24 h of continuous operation., Financial support from the Spanish Ministry of Science and Innova-tion (PID2022-139663OB-100, TED2021-130372B-C44 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) and by Generalitat Valenciana (CIPROM/2022/10 grant) are acknowledged. Raul Bruno Machado da Silva also thanks the "la Caixa" Foundation InPhINIT Program (ID 100010434) , fellowship code LCF/BQ/DI19/11730019, for the funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced Green Hydrogen Generation via Photocatalytic Water Splitting Using V-Doped Ti-Squarate MOFs

  • Ferrando-Ferrero, Javier
  • Vos-Gracia, Miriam
  • Santoriello, Giuseppe
  • Voccia, Maria
  • Farnesi Camellone, Matteo
  • Caporaso, Lucia
  • Horcajada, Patricia
  • Carrasco, Sergio
  • Marta
  • Fernandes-de Almeida, Vitor
  • Garcia-Baldovi, Hermenegildo
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] Herein, defect engineering strategies were applied to enhance the photocatalytic activity of squarate-based MOFs (IEF-11) for green hydrogen generation via water splitting. The textural properties of pristine IEF-11(Ti) were significantly improved using microwave (MW)-assisted synthesis, leading to a four-fold increase in surface area (350 m2 g-1) due to the formation of mesopores associated with defect aggregation, primarily arising from linker vacancies (24%). Vanadium doping (0-100%) progressively reduced the optical band gap (2.44-1.87 eV), shifting absorption toward the visible region. The IEF-11 series was evaluated as photocatalysts for the hydrogen evolution reaction under simulated sunlight irradiation, revealing a volcano-type trend correlating activity with V content. Doped with 11% V, the MW-synthesized IEF-11(Ti0.89V0.11)_MW solid exhibited the highest activity (1053 vs. 536 mu mol g-1 h-1 H2 for IEF-11(Ti)), attributed to optimized band alignment, enhanced charge separation, and structural robustness. It also showed activity in photocatalytic overall water splitting (83 mu mol g-1 h-1 H2, 30% higher than the undoped IEF-11(Ti)). Theoretical calculations further confirmed band gap narrowing and the generation of new electronic states upon V-doping, facilitating charge transfer and reducing electron-hole recombination. These findings highlight the relevance of inducing artificial porosity and V-doping of IEF-11(Ti) to prepare efficient MOF-based photocatalysts. Importantly, this work not only reports the first V-squarate frameworks but also represents one of the first systematic studies addressing the effect of metal doping in MOFs for photocatalytic water splitting, achieving competitive efficiencies operating in the absence of cocatalysts., M.V.-G., H.G., S.N., P.H., and S.C. acknowledge HYLIOS project (CPP2022-010052), J.F.-F., S.C., and P.H. acknowledge NAPOLION project (PID2022-139956OB-I00) and HYDRAGON project (PCI2025-163274) and S.N. thanks the support received from Grant PID2024-155324OB-I00, all funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. J.F.-F. acknowledges the PhD grant from the Community of Madrid (PIPF-2023/ECO-29763). M.G.-F. thanks the PhD financial support of PRE2022-101327. V.F. thanks support from Generalitat Valenciana for a Santiago Grisolia (CIGRIS/2021/096) scholarship. H.G.B. thanks the support of grant number RYC2022-037287-I funded by MCIN/AEI/1013039/501100011033. G.S. and L.C. gratefully acknowledge the italian MUR for funding via the PRIN 2022 project "MATISSE" (2022K5SX27). We also thank CINECA for providing computational resources through the ISCRA C projects "SCORPION" and "COSACCO". H.G. thanks financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PDI2021-0126071-OB-CO21) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). We acknowledge the European Synchrotron Radiation Facility (ESRF) for provision of synchrotron radiation facilities and Momentum Transfer for facilitating the diffraction measurements. Jakub Drnec is thanked for assistance and support in using beamline ID31. The measurement setup was developed with funding from the European Union's Horizon 2020 research and innovation program under the STREAMLINE project (grant agreement ID 870313). Measurements performed as part of the MatScatNet project were supported by OSCARS through the European Commission's Horizon Europe Research and Innovation programme under grant agreement No. 101129751.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Approaching enzymatic catalysis with zeolites or how to select one reaction mechanism competing with others

  • Ferri-Vicedo, Pau
  • Li, Chengeng
  • Schwalbe-Koda, Daniel
  • Xie, Mingrou
  • Gomez-Bombarelli, Rafael
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Approaching the level of molecular recognition of enzymes with solid catalysts is a challenging goal, achieved in this work for the competing transalkylation and disproportionation of diethylbenzene catalyzed by acid zeolites. The key diaryl intermediates for the two competing reactions only differ in the number of ethyl substituents in the aromatic rings, and therefore finding a selective zeolite able to recognize this subtle difference requires an accurate balance of the stabilization of reaction intermediates and transition states inside the zeolite microporous voids. In this work we present a computational methodology that, by combining a fast high-throughput screeening of all zeolite structures able to stabilize the key intermediates with a more computationally demanding mechanistic study only on the most promising candidates, guides the selection of the zeolite structures to be synthesized. The methodology presented is validated experimentally and allows to go beyond the conventional criteria of zeolite shape-selectivity., This work has been supported by Spanish Government through CEX2021-001230-S, PID2020-112590GB-C21, PID2021-122755OB-I00 and TED2021-130739B-I00 (MCIN/AEI/FEDER, UE), by Generalitat Valenciana through AICO/2021/201, and CSIC through the I-link+ Program (LINKA20381). The authors thank Dr. Maria Jose Diaz-Cabanas and Dr. Pilar Cumplido for providing the ITQ-24 and ITQ-15 samples. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Espanola de Supercomputacion (RES) and Servei d'Informatica de la Universitat de Valencia (SIUV) are acknowledged for computational resources and technical support. P.F. and C.Li. thank ITQ for their contract. M. Xie thanks the Agency for Science, Technology and Research for funding. D Schwalbe-Koda acknowledges financial support from MIT Energy Initiative Fellowship. MIT Engaging cluster, and MIT Lincoln Lab Supercloud cluster at MGHPCC are gratefully acknowledged for computational resources and support. The authors thank the MIT-Spain INDITEX Circularity Seed Fund for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Minimizing rare earth content of FCC catalysts: Understanding the fundamentals on combined P-La stabilization

  • Martínez, Cristina|||0000-0002-4415-084X
  • Vidal Moya, José Alejandro
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Yilmaz, Bilge
  • Kelkar, C.P.
[EN] Fluidized Catalytic cracking (FCC) is one of the main conversion processes in conventional refineries and employs a multicomponent catalyst with Y zeolite as the main source of activity and selectivity towards value added products. In order to meet the severe requirements of the FCC unit, the hydrothermal stability of this large pore zeolite is traditionally improved by means of controlled hydrothermal treatments that can be combined with acid washing cycles, with rare earth (RE) ion exchange or with a combination of both. Phosphorus has also been described as a hydrothermal stabilization element. Although most of the studies are based on ZSM-5 zeolites, a new Y zeolite containing FCC catalyst, Phinesse(TM), was developed recently. This catalyst, based on the partial substitution of RE by P allowed obtaining the same activity and the same yields to the main products as its conventional RE stabilized counterpart in the catalytic cracking of a vacuum gas oil (VGO). In this work, we present a systematic study where the hydrothermal stability of P- and La-free USYs with different dealumination degrees is compared with that of the corresponding USYs containing P or La alone or a combination of both stabilizing elements. The samples have been thoroughly characterized and their catalytic performance has been tested in a MAT unit. According to the results obtained, when using RE alone, only high contents (> 3.5 wt% RE) are able to stabilize the catalysts towards steaming under severe conditions (100% steam, 750 oC). However, lower RE ( wt%) can lead to similar hydrothermal stabilization when combined with intermediate phosphorus contents (similar to 1.0 wt%). The results obtained provide the bases for understanding the reasons behind the benefits of this combined P-La stabilization observed for the commercial PhinesseTM catalyst as compared to a high REO catalyst., This work has been supported by BASF Corporation, by the Spanish Government through PID2021-122755OB-I00 and by the GVA through AICO/2021/201. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. The authors thank Eva Briz for technical assistance and the Electron Microscopy Service of the UPV for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mizoroki¿Heck Macrocyclization Reactions at 1 M Concentration Catalyzed by Sub-nanometric Palladium Clusters

  • Garnes-Portoles, Francisco
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Merino Marcos, Estibaliz
[EN] The synthesis of cyclized organic compounds with more than ten atoms (macrocycles) is traditionally based on reversible reactions under highly diluted conditions, typically <0.05¿M, in order to circumvent the formation of intermolecular products. These reaction conditions severely hamper industrial productivity and the use of solid catalysts. Herein, it is shown that the intramolecular Mizoroki-Heck reaction of ¿-iodide cinnamates proceeds at 1¿M concentration when catalyzed by few-atom Pd clusters, either in solution or supported on a solid, to give different macrocycles in good yields. This paradigmatic increase in reaction concentration not only opens the door for macrocycle production with high throughputs but also enables the use of solid catalysts for a macrocyclization reaction in flow., This work is part of the project PID2020-115100GB I00 funded by MCIN/AEI/10.13039/501100011033MICIIN (Spain). Financial support by Severo Ochoa center of excellence program (CEX2021-001230-S) and Comunidad de Madrid Research Talent Attraction Program (2018-T1/IND-10054 to E.M.) is gratefully acknowledged. F.G.-P. thanks ITQ, UPV-CSIC for a contract (PAID 01-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Methane dehydroaromatization in a catalytic co-ionic membrane reactor: A parametric study with finite element analysis

  • Catalán-Martínez, David
  • Kjølseth, Christian
  • Santafé Moros, María Asunción|||0000-0002-0933-108X
  • Gozálvez-Zafrilla, José M.|||0000-0003-4419-6765
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Methane dehydroaromatization produces benzene from natural gas or biomethane in one step but faces thermodynamic and catalyst deactivation challenges due to coke formation. Co-ionic conducting membrane reactors mitigate these issues by extracting hydrogen and injecting oxide ions, boosting benzene yield, and suppressing coke. This study develops a finite element computational model that integrates gas flow, species transport, catalytic reactions, and electrochemical effects. Using kinetic parameters fitted from experimental data, the model analyses the impact of electrochemical ion pumping, feed rate, space velocity, and geometry on benzene yield and coke suppression. Results show that hydrogen generation is mainly limited by ethylene formation kinetics. Even so, for the high catalyst loads studied (GSHV = 500 NmL/(g¿h)), methane conversion higher than 50 % and benzene selectivity of 80 % are achieved. Parametric studies identified optimal geometry and conditions that allow over 95 % hydrogen extraction, shifting conversion toward benzene formation. Additionally, the model pinpoints conditions where local steam suppresses coke without causing catalyst deactivation via oxidation or reforming reactions., This work was supported by the Spanish Ministry for Science and Innovation [PID2022 139663OB-I00 and CEX2021 001230-S grants funded by MCIN/AEI/10.13039/501100011033] and Generalitat Valenciana [CIPROM/2022/10].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Graphene Decorated With Mo3S7 Clusters for Sensing CO2

  • Casanova-Cháfer, Juan
  • Llobet, Eduard
  • Feliz Rodriguez, Marta|||0000-0002-4429-0551
[EN] This paper reports for the first time a gas-sensitive nanohybrid based on trinuclear molybdenum sulfido clusters ((Bu4N)(2)[Mo-3(mu(3)-S)(mu-S-2)(3)Cl-6] (Mo3S7)) supported on graphene flakes (Mo3S7@Graphene). The nanomaterial, once implemented in a chemoresistive device, changes its electrical resistivity when exposed, at room temperature (RT), to toxic and harmful gases, such as hydrogen (H-2), carbon dioxide (CO2), carbon monoxide (CO), and benzene. Particularly, the Mo3S7@Graphene hybrid shows an outstanding sensing performance toward CO2. Theoretical calculations provide a better understanding of the plausible gas sensing mechanisms. These findings open the door for a new generation of molybdenum sulfido cluster-based sensors in which electronic interrogation can be implemented, advancing toward the realization of highly sensitive gas sensing., J.C.-C. gratefully acknowledges the Marie Sk & lstrok;odowska-Curie Individual Fellowship (Horizon Europe Program), grant agreement No. 101066282 "GREBOS." E.L. is supported by the Catalan Institution for Research and Advanced Studies via the 2023 Edition of the ICREA Academia Award. M.F. acknowledges the financial support by the Spanish Ministry of Science and Innovation (TED2021-130963B-C21 and CEX2021-001230-S grants) funded by MCIN/AEI/10.13039/501100011033 and FEDER A way of making Europe, and funding for open access charge: CRUE-Universitat Politecnica de Valencia. The authors gratefully acknowledge Ana Moreno Munoz and Maria Adelina Munoz Algaba for their assistance in the characterization of the samples. The Electron Microscopy Service of the UPV is also acknowledged for their help in spectroscopic identification. M.F. thanks Prof. Rosa Llusar for her comments on this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of cage topology on ethylene adsorption mechanism in silver exchanged CHA and RHO zeolites: An Inelastic Neutron Scattering and Density Functional study

  • De Marcos-Galán, Alessandra
  • E Silva de Almeida, Gabrielli Maria
  • Martinez-Ortigosa, Joaquin
  • Jiménez-Ruiz, M.
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Blasco Lanzuela, Teresa|||0000-0002-8115-4241
[EN] Zeolite-based adsorbents have been successfully used for many challenging separations due to their tunable properties. A particularly notable application involves the separation of light olefins from paraffins, wherein the molecular sieving properties of zeolites play a pivotal role. Additionally, the selective interaction of alkenes with transition metal cations, positioned within the channels and cavities of microporous zeolites, further enhances separation capabilities. This study aims to comprehensively characterize the interactions between ethylene and Ag exchanged zeolites, employing a multidisciplinary approach, combining Inelastic Neutron Scattering (INS), Infrared (IR) spectroscopy, Nuclear Magnetic Resonance (NMR), UV¿Vis and Density Functional Theory (DFT) calculations. CHA and RHO, zeolites largely applied in gas separation processes, were chosen due to their similar small pore sizes and pore volume, but different cavity shapes and flexibilities. The interpretation of derived DFT Electron Density Difference, experimentally supported by 13C Solid State NMR results, provide an understanding of each framework¿s role during the charge transfer mechanisms between ethylene and transition metal species. Specific deformations in the flexible framework of zeolite RHO explain a blueshift of the band at 400 cm¿1 in the librational region of INS spectra compared to CHA. This structural change in RHO, represented by the conic shape of the cage 8-ring side pockets, increases steric effects over the adsorbate while rendering the metallic adsorption center less exposed within the zeolite¿s cavity, finally leading to a weaker adsorption energy. The redshift of C=C stretching frequencies observed by IR spectroscopy and DFT calculations, as well as C=C and C-H bond lengthening of ethylene confirm the formation of complexes on silver in both zeolites and allowed a further evaluation of the effects of the different frameworks cages on the aforementioned interaction., Financial support by the Spanish Ministry of Science and Innovation by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe" (Projects: CEX2021-001230-S, PID2022-136934OB-I00) is deeply acknowledged. The authors also thank the Spanish Ministry of Science and Innovation by MCIN /AEI /10.13039/501100011033 and "European Union Next Generation EU/PRTR" (Projects: TED2021-130191B-C41), Generalitat Valenciana, Spain (Project: Prometeo/2021/077) and "Advanced Materials Programme" of Generalitat Valenciana "European Union Next Generation EU/PRTR" (project: MFA/2022/047). All authors thank ILL for neutron beam-time allocation (experiments 7-05-488 and 7 05-522) and ILL C-Lab for computational support. G.A. thanks funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 847439. A.M.G. thanks funding of the grant No SEV 2016-0683-19-2 from Severo Ochoa programme .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pd-Enhanced Carbon-Encapsulated Co Nanoparticles for Efficient Reverse Water Gas Shift under Magnetic Induction Heating

  • García-Zaragoza, Adrián
  • Río-Rodríguez, José Luis del
  • Cerezo-Navarrete, Christian
  • Molina, Maria Asuncion
  • Costley-Wood, Lucy
  • Mazarío-Santa-Pau, Jaime
  • Chaudret, Bruno
  • Martínez-Prieto, Luis Miguel
  • Beale, Andrew M
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Reducing CO2 to CO via the reverse water¿gas shift (RWGS) reaction is a promising strategy for carbon capture and utilization (CCU). In this study, tailored magnetic catalysts were designed through the pyrolysis of a Co-based MOF to form well-defined nanoparticles. As a result, carbon-encapsulated cobalt nanoparticles (Co@C) and palladium-doped cobalt nanoparticles (CoPd/Co@C) were synthesized and thoroughly characterized using a variety of techniques, including in situ X-ray absorption and diffraction experiments. These carbon-based catalysts were simultaneously used as heating agents and catalysts for the magnetically induced RWGS reaction, exhibiting remarkable activity and selectivity for syngas production. CO2 conversions of 61.1% and 71.1% were obtained for Co@C and CoPd/Co@C (63 mT, 2 kW, 320 kHz), respectively. Using magnetic induction heating (MIH), these catalysts operate at lower local temperatures and with greater energy efficiency than conventional thermal heating, while achieving superior CO production efficiency. Notably, CoPd/Co@C achieved highly satisfactory CO production efficiency (478.5 mLCO/kW·h), demonstrating a significant improvement compared to the analogous process utilizing magnetically induced heating. Furthermore, CoPd/Co@C exhibited unwavering stability, maintaining its performance for more than 200 h without significant degradation or need for reactivation. This study highlights the potential of MIH for industrial applications in CO2 reduction, offering a more renewable and economically viable alternative to traditional methods., The authors thank the financial support from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. In addition, this work has received funding from the Spanish Government (PID2022-140111OB-I00, PID2021-126080OA-I00, TED2021-130191B-C41, TED2021-132087A-I00 and CNS2023-145078 funded by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR), Generalitat Valenciana (CIPROM/2022/10), and Junta de Andalucia (ProyExcel_00706). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). J.L.R.-R. thanks to the MCIU for his FPU PhD contract FPU21/02562. S.G.T. thanks the Unversitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. J.M. acknowledges his MSCA individual postdoctoral fellowship from the Horizon Europe research and innovation program (Project 101109254-BIOCATMAG) for funding. The authors thank Instituto de Tecnologia Quimica (ITQ), Consejo Superior de Investigaciones Cientificas (CSIC) and Universitat Politecnica de Valencia (UPV) for the facilities. We also thank the UPV Electron Microscopy Service for the TEM analysis and Magnetic Measurements Service of LPCNO. The authors would also like to thank ALBA synchrotron for provision of beamtime 2023097780 on NOTOS beamline, and beamline scientist Eduardo Villalobos. Also, Diamond Light Source for measurements via Block Allocation Group Access on B18 during beamtime SP34632-4. The UK Catalysis Hub is kindly thanked for resources and support provided during these B18 measurements, via UCL's membership of the UK Catalysis Hub Consortium funded by EPSRC grant EP/R026939/1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Sequential Catalytic Carbonation-Hydrolysis-Dehydrogenation Reaction of Epoxides

  • Lumbreras-Teijeiro, Alejandro
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] The design of cascade reactions in synthetic programs is of interest, particularly if the individual steps involve catalyzed reactions, and simple and highly available molecules such as carbon dioxide (CO2), water (H2O), and dihydrogen (H-2) are employed. Herein, a three-step sequential reaction is shown from epoxides to dehydrogenated diols, catalyzed by a combination of commercially available ionic liquids and supported Pt species on charcoal (Pt/C) in low amounts (<0.05 mol%). The process involves first carbonation of epoxides with CO2, followed by the opening of the carbonate with H2O, and then an acceptor-less dehydrogenation reaction of the resulting diol to release H-2. The inclusion of this last step in the one-pot synthesis of diols from epoxides is, to the knowledge, unprecedented. Reactive and kinetic experiments for each individual step reveal the key role of CO2 to avoid epoxide polymerizations and enable the synthesis of a clean diol for the final dehydrogenation reaction., This work was supported by the MICINN and MCIUN (Spain), Projects PID2020-115100GB-I00 and PID2023 148441NB I00. Thanks are also extended to the Severo Ochoa centre of excellence program (CEX2021 001230 S). J.O.-M. thanks the MICIIN for the concession of the Ramón y Cajal contract RYC2022 036154 I (funded by MCIN/AEI/10.13039/501100011033). A.L. T. thanks the MICINN for the concession of the FPI grant PRE2020-093338 (through SEV-2016-0683-20-3).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Environmentally sensitive fluorescence of the topical retinoid adapalene

  • Soler-Orenes, Juan A.
  • Monari, Antonio
  • Miranda, Miguel A.
  • Hernández-Gil, Javier
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
[EN] Intrinsic fluorescence of drugs brings valuable information on their localization in the organism and their interaction with key biomolecules. In this work, we investigate the absorption and emission properties of the topical retinoid adapalene in different solvents and biological media. While the UVA/UVB absorption band does not exhibit any significant solvent-dependent behavior, a strong positive solvatochromism is observed for the emission. These results are in line with molecular modeling and simulations that show the presence of two quasi-degenerate states, i.e., a local pi-pi* and an intermolecular charge-transfer (ICT) state. However, molecular modeling also revealed that, whatever the solvent, at the corresponding equilibrium geometry the lowest and emissive excited state is the local pi-pi*. Finally, the potential of adapalene to act as a biological probe is demonstrated using albumin, DNA and micelles., The author(s) declare that financial support was received for the research, authorship, and/or publication of this article. Financial support from the Spanish (project PID 2021-128348NB-I00 funded by MCIN/AEI/10.13039/501100011033/and FEDER a way of making Europe, and Severo Ochoa centre of excellence program CEX 2021-001230-S) and regional (CIAICO/2021/061) governments is acknowledged. AM also thanks ANR and CGI for their financial support of this work through Labex SEAM ANR 11 LABX 086, ANR 11 IDEX 05 02. The support of the IdEx Université Paris 2019 ANR-18-IDEX-0001. JS-O is also thankful to the Spanish Government for the predoctoral grant (PRE 2019-089665). JH-G thanks the support of the Maria Zambrano Program of Excellence within the framework of grants for talent retaining of the Universitat Politecnica de Valencia and the Spanish Ministry of Universities, funded by the European Union-Next Generation (UPV Contract C16684).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Supramolecular interaction of a molecular catalyst with a polymeric carbon nitride photoanode enhances photoelectrochemical activity and stability at neutral pH

  • Mondal, Sanjit
  • Salati, Martina
  • Nicaso, Marco
  • Segado-Centellas, Mireia
  • Michael Volokh
  • Bo, Carles
  • Gil-Sepulcre, Marcos
  • Llobet, Antoni
  • Menny, Shalom
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Polymeric carbon nitride (CN) emerged as an alternative, metal-free photoanode material for water-splitting photoelectrochemical cells (PECs). However, the performance of CN photoanodes is limited due to the slow charge separation and water oxidation kinetics due to poor interaction with water oxidation catalysts (WOCs). Moreover, operation under benign, neutral pH conditions is rarely reported. Here, we design a porous CN photoanode connected to a highly active molecular Ru-based WOC, which also acts as an additional photo-absorber. We show that the strong interaction between the pi-system of the heptazine units within the CN with the CH groups of the WOC's equatorial ligand enables a strong connection between them and an efficient electronic communication path. The optimized photoanode exhibits a photocurrent density of 180 +/- 10 mu A cm(-2) at 1.23 V vs. the reversible hydrogen electrode (RHE) with 89% faradaic efficiency for oxygen evolution with turnover numbers (TONs) in the range of 3300 and a turnover frequency (TOF) of 0.4 s(-1), low onset potential, extended incident photon to current conversion, and good stability up to 5 h. This study may lead to the integration of molecular catalysts and polymeric organic absorbers using supramolecular interactions., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 849068). This work was also partially supported by the Israel Science Foundation (ISF), Grant No. 601/21. MS and MN acknowledge the Ministerio de Ciencia e Innovacion (MICINN) for the grants PRE2020-093789 and PRE2020-093521, respectively. CB gratefully acknowledges MCINN/AEI/10.13039/501100011033 for projects PID2020-112806RB-I00 and CEX2019-000925-S, the ICIQ Foundation and the CERCA program of the Generalitat de Catalunya for funding. HG thanks MICINN (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union Next Generation EU PRTR-C17.I1). JA thanks the MICINN for a Ramon y Cajal research associate contract (RYC2021-031006-I funded by MCIN/AEI/10.13039/501100011033 and by "European Union Next Generation EU/PRTR), and acknowledges the financial support (PID2022-141099OA-I00 funded by MCINN/AEI/10.13039/501100011033 and by "European Union Next Generation EU/PRTR). AL acknowledges MICINN through the project PID2022-140143OB-I00, Generalitat de Catalunya for the project 2017 SGR 1631 and Severo Ochoa (CEX2019-000925-S).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel DMAP@Mesoporous Silica Hybrid Heterogeneous Catalysts for the Knoevenagel Condensation: Greener Synthesis through Eco-friendly Solvents

  • Brito, Julio C. Fernandes P.
  • Travagin, Fabio
  • Barbero, Mauro
  • Giovenzana, Giovanni B.
  • Miletto, Ivana
  • Gianotti, Enrica
  • Esteban-Barrera, Cristina|||0009-0007-7940-9018
  • Díaz, Urbano|||0000-0003-1472-8724
  • Velty, Alexandra|||0000-0002-8263-4570
[EN] This article reports a sustainable synthesis of a novel organic-inorganic hybrid catalysts, featuring 4-(dimethylamino)pyridine (DMAP) immobilized onto mesoporous MCM-41 silica and amorphous Aerosil silica supports. Using (+/-)-2-methyltetrahydrofuran (MeTHF), a bio-based solvent, the covalent binding of DMAP to silica surfaces was achieved, reducing reliance on traditional petroleum-based solvents like toluene. The DMAP-functionalized hybrid catalysts, characterized through XRPD, TGA/DTA, FE-SEM, and FT-IR, demonstrated effective catalytic performance in the Knoevenagel condensation, a reaction relevant in producing fine chemicals and pharmaceuticals. The mesoporous MCM-41-supported catalyst exhibited superior activity due to its high surface area and ordered porous structure, with 97 % yield and 99 % selectivity. Stability and reusability were validated through leaching and recycling tests, confirming minimal DMAP leaching and robust catalytic performance over consecutive cycles. This green synthetic pathway underscores the potential of hybrid catalysts in advancing sustainable chemistry, promoting reduced energy consumption, and supporting a circular economy through recyclable, highly active catalysts in eco-friendly solvents. These findings demonstrate that MCM-41-supported DMAP hybrids are viable candidates for eco-friendly applications., C.E, U.D and A.V. are grateful for financial support by Spanish Ministry (projects PID2023-146114NB-C21 and CEX2021-001230-S) and by Generalitat Valenciana (MFA/2022/003). Open Access publishing facilitated by Universita degli Studi del Piemonte Orientale Amedeo Avogadro, as part of the Wiley - CRUI-CARE agreement.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving nitrate-to-ammonia conversion efficiency on electrodeposited nickel phosphide via surface delta-FeOOH modification

  • Silva, Anelisse B.
  • Reis, Eduardo A.
  • Hu, Jiajun
  • Ribeiro, Caue
  • Mascaro, Lucia H.
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Electrocatalytic nitrate reduction to ammonia is an appealing and promising approach for recovering industry and agricultural wastewater. However, there is a lack of efficient electrocatalysts for NO3- conversion at low overpotentials and a range of nitrate concentrations, which could enable nitrogen recovery from various wastewater streams. Here, we report an affordable and efficient electrodeposited amorphous-Ni3P electrode modified with delta-FeOOH, forming a heterojunction catalyst that efficiently converts nitrate into ammonia. The optimum heterojunction performance achieved a high faradaic efficiency of 98% +/- 0.72 at -0.3 V vs. RHE with an NH3 production yield of 8.49 mg h-1 cm-2, ranking Ni3P/delta-FeOOH among the most active electrocatalysts so far reported for this process. Ni3P/delta-FeOOH showed good stability using ethyl cellulose as a green and fluoride-free binder without losing the superficial modification. Mechanistic studies by in situ Raman spectroscopy show that the role of delta-FeOOH is the stabilisation of the NOx intermediates. At the same time, Ni3P provides *H species available for NOx reduction, thus resulting in highly selective NO3 hydrogenation. In contrast, in the absence of delta-FeOOH, Ni3P exhibits significantly lower NH3 faradaic efficiency due to simultaneous H2 evolution. Therefore, the present results show the synergistic effect between delta-FeOOH and Ni3P in the electrocatalytic nitrate reduction, with delta-FeOOH playing a crucial role in stabilising the reaction intermediates and enhancing the ammonia selectivity., The authors are grateful for the sponsorship and financial support of FAPESP (#2017/11986-5, #2018/01258-5, #2020/11756-2, #2022/15742-1, #2021/12394-0 and # 2013/07296-2), Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior - Brazil (CAPES) - Finance Code 001, Conselho Nacional de Desenvolvimento Cientifico e Tecnologico, CNPq, grant number #152607/2022-6, #311769/2022-5, #405133/2023 and #406156/2022-0, and FINEP-Financiadora de Estudos e Projetos grant number #01.22.0179.00, #01.23.0645.00. Also financial support from the Spanish Ministry of Science and Innovation (CEX-2021-001230S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic oxidation of volatile organic compounds with Mn-zeolites

  • Toloza-Blanco, Lyzed Arelis
  • Góra-Marek, Kinga
  • Tarach, K. A.
  • Sobalska, J.
  • Plá-Hernandez, Adrián
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Mn-catalysts supported on zeolites are active materials for oxidising volatile organic compounds, but the catalysts' activity and selectivity depend on the support's characteristics. In this work, we study the performance of different Mn catalysts supported on zeolites with different Si/Al ratios and topology in the ethanol oxidation reaction. The results show a correlation between the mechanism of the reaction and the presence or absence of acid sites on the zeolite surface, which is based on its aluminium content. It is observed that the presence of Bronsted acid sites catalyses ethanol dehydration to ethylene that is oxidised to CO2 at higher temperatures. Without protonic acid sites, ethanol is primarily oxidised to acetaldehyde and subsequently oxidised to CO2, achieving a complete oxidation at lower temperatures. The acidity also influences the nature of the metallic active sites, forming Mn-oxo species with higher oxidation state in the catalyst with lower aluminium content. These species are more active than those formed in the catalyst enriched with Bronsted acid sites. Thus, zeolites with higher Si/Al ratios are more adequate for supporting Mn catalysts in the ethanol oxidation reaction. The results show that low acidity is a decisive factor in designing active catalysts for this reaction, while zeolite topology or catalyst surface area are of secondary importance., The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033; TED2021-131715B-I00 grant funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGeneration EU/PRTR and PID2021-126235OB-C31) . Financial support by the Generalitat Valenciana (Prometeo 2021/077) is also acknowledged. L. Toloza thanks Fundacion Carolina for the pre-doctoral grant, call 2019-2020 Universidad Central de Colombia and Universitat Politecnica de Valencia agreement. A. Pla-Hernandez thanks Spanish Ministry of Science and Innovation for the pre-doctoral grant PRE2019-088100, associated with the project RTI2018-101784-B-I00. FT-IR and UV-vis in situ and operando studies were financed by Grant No. 2021/41/B/ST4/00048 from the National Science Centre, Poland.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mixed Fe-Mo carbide prepared by a sonochemical synthesis as highly efficient nitrate reduction electrocatalyst

  • Hu, Jiajun
  • Osella, Silvio
  • Arizono dos Reis, Eduardo
  • Brunca da Silva, Anelisse
  • Ribeiro, Caue
  • Helena Mascaro, Lucia
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Ammonia, a versatile compound that can be used as a fertilizer, chemical or fuel, has since long been produced through the energy-intensive Haber-Bosch process. Recently, the electrochemical nitrate reduction reaction (NO3RR) using electricity generated from renewable sources has attracted widespread attention. However, the complex reaction pathway of NO3RR leads to the formation of many undesirable by-products. Herein we successfully prepared a mixed (FeMo)2C catalyst with good electrocatalytic NO3RR, having a NH3 yield of 14.66¿mg¿h-1 cm-2 and an FE of 94.35% at low potential -0.3¿V vs RHE. DFT calculations show that the presence of Fe in Mo2C lattice changes the reaction mechanism, decreasing the potential barrier to be overcome from 1.36 to 0.89¿eV. In addition, mixed Fe-Mo carbide facilitates the adsorption of intermediates and promotes NH3 desorption, facilitating NO3¿ reduction to NH3. In addition, (FeMo)2C was used as cathode for Zn-NO3 battery to generate electricity, producing ammonia at the same time, with a power density of 3.8 mWcm-2 and an NH3 FE of 88%. This work describes a new synthesis method for mixed metal carbides and provides a promising strategy for NH3 production., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). J.H. thanks the Chinese Scholarship Council for a postgraduate scholarship to perform his PhD at Valencia. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021 031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR), and Generalitat Valenciana financial support (CIGE 2022-093) financed by European Union-Next Generation EU, through the Conselleria de Innovacion, ¿ Universidades, Ciencia y Sociedad Digital. S.O. thanks the National Science Centre, Poland (grant no. UMO/2020/39/I/ST4/01446) and the Excellence Initiative Research University (IDUB) Program, Action I.3.3 Establishment of the Institute for Advanced Studies (IAS) for funding (grant no. UW/IDUB/2020/25). The computation was carried out with the support of the Interdisciplinary Center for Mathematical and Computational Modeling at the University of Warsaw (ICM UW) under grants no. G83-28 and GB80-24.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Zirconium-containing Metal-Organic Frameworks (MOFs) as catalysts for biomass conversion

  • Rapeyko, Anastasia|||0000-0002-8309-3702
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] In this work, we review some illustrative examples to evidence the potential of two archetypal Zr-containing MOFs, UiO-66 and MOF-808, as heterogeneous catalysts for converting biomass-derived products into valuable chemicals. The reactions are organized in three blocks, depending on the biomass source: carbohydrates, lipids, and other sources. Through this review, we will show that the chemical properties of these two Zr-MOFs are significantly different in terms of the nature and strength of acid sites, which largely depends on the number of missing linker defects of the solid and its hydration state. While hydrated UiO-66 bears relatively strong Br & oslash;nsted-induced acid sites, dehydrated MOF-808 is more than competent as a Lewis acid catalyst. Therefore, we will pick one or the other catalyst depending on the particular demands of the catalytic transformation that we want to carry out., Financial support from the Spanish Ministry of Science and Innovation (PID2020-112590GB-C21, PID2023-146114NB-C21, and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. This study forms part of the Advanced Materials Program and was supported by MICIN with funding from European Union NextGeneration (PRTR-C17.I1) and by the Generalitat Valenciana (MFA/2022/003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photocatalytic activity of a 2D copper porphyrin metal-organic framework for visible light overall water splitting

  • Uscategui-Linares, Andrés Felipe|||0000-0003-2448-9966
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Szalad, Horatiu
[EN] A 2D copper tetrakis(4-carboxyphenyl)porphyrin metal-organic framework has been prepared and used as a photocatalyst for overall water splitting, measuring under visible light irradiation (lambda > 450 nm) under one sun power conditions a H2 production rate of 120 mu molH2 gcatalyst-1 h-1 that is among the highest ever reported. While the 2D Cu porphyrin MOF undergoes substantial degradation in 3 h upon UV irradiation (320-380 nm) in the presence of air, it appears to be photostable under the conditions of the overall water splitting and visible light exposure, exhibiting similar temporal profiles for H2 and O2 evolution. Photocurrent experiments and band energy measurements indicate that the photocatalytic efficiency derives from an efficient charge separation in the visible region (apparent electron charge extraction efficiency at 540 nm of 0.1%) and adequate alignment of the redox potential of the conduction (-0.59 V vs. NHE) and valence (+1.48 V vs. NHE) bands for water splitting., Financial support from the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1), and the European Commission (MOF2H2; Grant Agreement 101084131) is gratefully acknowledged. J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR) and the financial support (PID2022-141099OA-I00 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sunlight-Driven Green Synthesis of Platinum Nanoparticles From Double-Vacancy Halide Perovskite Precursors for Methanol Reforming

  • Chacón-Ruiz, Saray
  • Garcia-Baldovi, Hermenegildo
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Mego, Kevin
  • Ruiz-Campos, Pedro
[EN] The development of synthetic procedures for preparing metal nanoparticles with controlled size using sunlight opens new avenues toward more sustainable methods with lower energy consumption. Herein, we propose the use of double-vacancy halide perovskites as precursors for engineering highly crystalline and small platinum nanoparticles (< 3 nm) under simulated sunlight irradiation, using low concentration of methanol as sacrificial agent at room temperature. The formation of Pt NP was dependent on the methanol concentration impacting in the final Pt particle size distribution and time formation. After purification, this narrow sized Pt NP were employed for the methanol reforming reaction, showing excellent activity after 4 h and high selectivity toward hydrogen production (4.18 mmol & centerdot;h(-1) of H-2), along with other carbon products such as CO (2.26 mmol & centerdot;h(-1)), CH4 (0.54 mmol & centerdot;h(-1)), CO2 (0.28 mmol & centerdot;h(-1)), and C-2 species (0.17 mmol & centerdot;h(-1))., This research was funded by the Spanish Ministry of Science and Innovation through MCIN/AEI/10.13039/501100011033/ and "FEDER a way of making Europe," and the Severo Ochoa Centre of Excellence program (CEX2021-001230-S). K.M. acknowledges the PRE2022-104119 grant for the project "Catalytic processes: Catalysis for energy and process intensification by applying instrumental tools to monitor chemical processes." S.C.R. is thankful to PR-H2CVAL4-C1-2022-0090 grant funded by Union Europea NextGenerationEU. P.A. received funding from the PID2021-123163OB-I00 grant, and H.G.B. was supported by the RYC2022-037287-I grant and PAID-06-23. We thank to the technical team at the Instituto de Tecnologia Quimica (ITQ) for their support in facilitating the characterizations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Understanding the Dynamics of Nanoparticle Formation and Evolution in Functional Oxides via In Situ SAXS/WAXS

  • Elena
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Haas, Sylvio
  • Solis, Cecilia
[EN] The formation and evolution of nanoparticles on the surface of oxide catalysts are essential for determining their catalytic performance. Establishing a direct relationship between structure and function requires real-time in situ characterization under operational conditions. Multiple techniques can be used to create catalytically active nanoparticles on catalyst surfaces, including traditional deposition or infiltration methods and novel techniques such as exsolution, which allows the in situ growth of stable particles. In this study, we report the first in situ Small-Angle and Wide-Angle X-ray Scattering (SAXS/WAXS) investigation of Ni nanoparticle formation in La0.85Sr0.15Cr0.8Ni0.2O3-delta (LSCN), where particles emerge via exsolution, and in a reference La0.85Sr0.15CrO3-delta sample with infiltrated Ni (LSC+5N), at synchrotron facilities. The results reveal early nucleation and thermal evolution with high sensitivity and statistical robustness. By tracking nanoparticle formation and evolution during reduction at increasing temperatures, SAXS provides a complementary tool to conventional techniques such as XRD and electron microscopy for real-time monitoring. This study establishes SAXS/WAXS as a powerful and innovative tool for investigating nanoscale processes in functional ceramic materials, offering new insights into the design of stable and active nanostructured catalysts., The authors acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for providing experimental facilities. SAXS-WAXS measurements were performed at P62 (beamtime allocated for proposal I-20240066 EC) and high energy XRD measurements were performed at P07 (Petra III). We also extend our appreciation to the Electron Microscopy Service of the Universitat Politecnica de Valencia and to Ana Maria Garcia Castillo for her thoughtful help with image editing. Financial support from the Spanish National Research Council (CSIC) through the project PIE 20238AT016 and to the Spanish Government through the CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033, are also acknowledged. Open access funding enabled and organized by Projekt DEAL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of the large pore aluminophosphate STA-1 and its application as a catalyst for the Beckmann rearrangement of cyclohexanone oxime

  • Gonzalez-Camuñas, Nuria
  • Dawson, Daniel M.
  • Lozinska, Magdalena M.
  • Mattock, James
  • Cox, Paul A.
  • Ashbrook, Sharon
  • Wright, Paul
  • Rey, Fernando
  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
[EN] The preparation of stable large pore aluminophosphate (AlPO) zeotypes offers materials for applications in adsorption and catalysis. Here we report the synthesis of the pure AlPO with the SAO topology type (AlPO STA-1) using N,N '-diethylbicyclo[2.2.2]oct-7-ene-2,3:5,6-dipyrrolidine (DEBOP) as the organic structure directing agent in the presence of fluoride. The AlPO STA-1 can be rendered microporous (pore volume 0.36 cm(3) g(-1)) via calcination and the calcined form remains stable in the presence of moisture. The structure of the dehydrated form has been established by Rietveld refinement (tetragonal P (4) over bar n2, a = 13.74317(10) angstrom, c = 21.8131(5) angstrom, V = 4119.94(16) angstrom(3)). Multinuclear Al-27 and P-31 MAS NMR, together with 2D COSY and CASTEP NMR calculations, enables resolution and assignment of the signals from all crystallographically distinct Al and P framework sites. Structural elucidation of the as-prepared aluminophosphate-fluoride is more challenging, because of the presence of partially protonated OSDA molecules in the 3D-connected channel system and in particular because the fluoride ions coordinate with positional disorder to some of the Al atoms to give 5-fold as well as tetrahedrally-coordinated framework Al species. These are postulated to occupy Al-F-Al bridging sites, where they are responsible for distortion of the framework [P (4) over bar n2, a = 13.3148(9) angstrom, c = 22.0655(20) angstrom, V = 3911.9(7) angstrom(3)]. Calcination and removal of fluoride ions and OSDAs allows the framework to expand to its relaxed configuration. The SAO topology type aluminophosphate can also be synthesised with small amounts of Si and Ge in the framework, and these SAPO and GeAPO STA-1 materials are also stable to template removal. IR spectroscopy with CO as a probe at 123 K indicates all have weak-to-mild acidity, increasing in the order AlPO < GeAPO < SAPO. These STA-1 materials have been investigated for their activity in the Beckmann rearrangement of cyclohexanone oxime to epsilon-caprolactam at 598 K: while all are active, the AlPO form is favoured due to its high selectivity and slow deactivation, both of which are a consequence of its very weak acid strength, which is nevertheless sufficient to catalyse the reaction., Financial support from the Spanish Ministry of Science and Innovation by MCIN/AEI/10.13039/501100011033 and also, together with, in part, the European Regional Development Fund "ERDF A way of making Europe" (Co-funded projects: CEX2021-001230-S, PID2022-136934OB-100), is gratefully acknowledged. The authors also thank the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033) together with the European Regional Development Fund "European Union Next Generation EU/PRTR" (TED2021-130191B-C41), Generalitat Valenciana (Prometeo 2021/077) and "Advanced Materials Programme" of Generalitat Valenciana "European Union Next Generation EU/PRTR" (MFA/2022/047). N. G. C. thanks the Severo Ochoa Program (SEV-2012-0267-02) of the Spanish Ministry of Science, Innovation and University for a pre-doctoral fellowship (BES-2016-078178). Dr Patricia Concepcion and Mr Jose Miguel Salas are thanked for performing the IR spectroscopic study of the CO adsorption on the reported catalyst. The Servicio de Microscopia de la Universitat Politecnica de Valencia is warmly thanked for its technical support. We also gratefully acknowledge funding from the EPSRC (Designed Synthesis of Zeolites: EP/S016201/1, MML, PAW, DMD, SEMA; EP/S016147/1, JM, PAC) for funding. The UK High-Field Solid-State NMR Facility used in this research was funded by EPSRC and BBSRC (EP/T015063/1), as well as the University of Warwick including via part funding through Birmingham Science City Advanced Materials Projects 1 and 2 supported by Advantage West Midlands (AWM) and the European Regional Development Fund (ERDF). Collaborative assistance from the Facility Manager Team (Dinu Iuga and Trent Franks, University of Warwick) is acknowledged. The Scottish High-Field NMR Facility was funded by EPRSC (EP/R030065/1) and measurement time was supported by the University of St Andrews. We are also grateful to EPSRC for support through the Collaborative Computational Project on NMR Crystallography (CCP-NC), via EP/T026642/1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Correspondence of Plasticity and Hysteresis in Organic Electrochemical Transistor Synapses

  • Zhang, Heyi|||0000-0003-0443-3367
  • Rivera-Sierra, Gonzalo|||0009-0008-2651-9157
  • Bisquert, Juan|||0000-0003-4987-4887
[EN] Organic electrochemical transistors (OECTs) display two prominent phenomena: pronounced hysteresis in transfer curves and synaptic-like plasticity under gate-voltage pulse trains. These two observations are usually analyzed with different protocols, and the direction of transfer hysteresis (clockwise/counterclockwise, CKW/CCW) is rarely used to anticipate the polarity of pulse-driven weight updates (synaptic potentiation or depression). In the context of a minimal dynamical framework built on an internal ionic state, we show that transfer-loop orientation provides an operational indicator of the sign of pulse-induced updates once the device polarity factor, pulse protocol, and operating window are fixed. More specifically, the observable response is governed by the competition between an effective ionic relaxation time and an effective electronic readout time, both defined within a stated operating window. Changing the balance between these two effective times changes the relative weight of state lag and current readout, which can switch the loop orientation and reverse the pulse response accordingly. The result is proposed not as a universal recipe with strictly constant material parameters but as a compact interpretation framework for relating fast transfer sweeps to pulse-driven plasticity under controlled OECT operating conditions., The work was funded by the European Research Council (ERC) via Horizon Europe Advanced Grant, grant agreement n0 101097688 ("PeroSpiker"). Additional institutional support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanoparticles of non-porphyrinic covalent organic frameworks as contrast agents for photoacoustic imaging

  • Pi-Martín, Irene
  • VIDAURRE-AGUT, CARLA
  • Rivero-Buceta, Eva María
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • García-Garrigos, Juan José
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Photoacoustic imaging (PAI) is an emerging biomedical modality offering non-invasive, high-resolution imaging with molecular contrast. Its effectiveness for molecular imaging is improved by using external contrast agents such as dyes and nanostructures, which enable targeted imaging, deeper tissue penetration, and enhanced diagnostic accuracy. However, the clinical translation of these agents has been hindered by limitations in biocompatibility, biodegradability, and functionalization versatility. In this study, two porphyrin-free nanoscale covalent organic frameworks (nCOFs), TAPB-PDA and LZU1, were evaluated as novel exogenous contrast agents for PAI. Their photoacoustic responses were systematically measured and compared with traditional contrast agents, such as gold nanoparticles (AuNPs) and ATTO532-labelled mesoporous silica nanoparticles. Experiments at 532 nm across a range of concentrations demonstrated strong photoacoustic signals from TAPB-PDA and LZU-1, with enhanced response at higher concentrations. Besides, both nCOFs also provided detectable signals at the NIR window at the lowest concentration, indicating a broad working range. A nonlinear model of the volume-integrated photoacoustic pressure is also provided. Furthermore, in vitro cytotoxicity assays indicated excellent nCOF biocompatibility, even at higher concentrations. Photostability tests under prolonged pulsed laser irradiation revealed that both nCOFs exhibit good resistance to photobleaching and partial signal recovery under intermittent excitation. Collectively, these findings highlight the potential of TAPB-PDA and LZU-1 nCOFs as biocompatible, biodegradable, and functionally versatile contrast agents for advanced photoacoustic imaging., This work has been supported by the Agencia Estatal de Investigación (AEI, projects PID2019111436RBC22 and PID2022142952OB-100), Generalitat Valenciana through the programs Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004, and Programa de Garantía Juvenil I+D EDGJID/2021/189, and NextGenerationEU Recovery and Resilience Facility (RRF) through the PTI+ Global Health Platform of Spanish National Research Council (grant SGL2103023). N. Jiménez is grateful for financial support from the Spanish Ministry of Science, Innovation and Universities (MICIU) through grants Juan de la Cierva Incorporación , IJC2018- 037897-I, and Ramón y Cajal RYC2021-034920-I. A. Cebrecos is grateful for financial support from Universitat Politècnica de València through programs PAID-10-19, PAID-PD-22. Irene Pi is grateful for financial support from program CIACIF/2021/403 of Generalitat Valenciana. In addition, financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Decyl-riboflavin: membrane-targeted lipophilic photosensitizer for lipid peroxidation and phototoxicity in HeLa cells under blue light irradiation

  • Ardila Padilla, Carlos A.
  • Uribe Mayor, M. Sol
  • Urrutia, Maria Noel
  • Thomas, Andres H.
  • Dantola, M. Laura
  • Layana, Carla
  • Vignoni, Mariana
  • Dillon, Macarena-Noeli
  • Rodríguez Muñiz, Gemma María|||0000-0001-8989-2401
  • Andreu, Inmaculada|||0000-0003-3409-9443
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
[EN] Photodynamic therapy (PDT) exploits the controlled generation of reactive species to selectively destroy target cells, offering a minimally invasive alternative to conventional cancer and antimicrobial treatments. A key determinant of PDT efficacy is the ability of the photosensitizer (PS) to localize within lipid membranes, where proximity to polyunsaturated lipids maximizes oxidative damage. Riboflavin (Rf, Vitamin B2) is a biocompatible, naturally occurring PS with absorption in the blue light range; however, its inherent hydrophilicity limits membrane interaction. Here, we report the photochemical and biological characterization of 3-decyl-riboflavin (decyl-Rf), a lipophilic Rf derivative designed to direct oxidative damage specifically to the lipid bilayer under blue LED irradiation. Decyl-Rf generates singlet oxygen (Type II) while simultaneously operating through a Type I mechanism. This dual capacity translates into extensive lipid peroxidation and membrane disruption in biomimetic systems, effects essentially absent for hydrophilic Rf. Interaction studies with serum albumin reveal strong ground-state complex formation, which markedly reduces cellular uptake under serum-containing conditions. In HeLa cells, decyl-Rf is efficiently internalized and localizes preferentially in lipid-rich compartments, inducing significant phototoxicity upon blue light irradiation. These results position decyl-Rf as a potent membrane-targeted PS, with its lipid peroxidation capacity suggesting a possible contribution to regulated cell death pathways and provide a mechanistic foundation for lipophilic flavin derivatives as next-generation agents for blue light PDT in oncological and antimicrobial applications., This work was partially supported by Consejo Nacional de Investigaciones Cientificas y Tecnicas (CONICET, PIP 2023-0187), Agencia Nacional de Promocion Cientifica y Tecnologica (ANPCyT-Grants PICT 2019-3416 and 2020-3103) and Universidad Nacional de La Plata (UNLP-Grant 11/X975 and 11/X1021). Financial support from Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (PAID-11-24), the Spanish (projects PID2021-128348NB-I00, PID2024-162272NB-I00, Severo Ochoa Center of Excellence Program CEX2021-001230-S, funded by MCIN/AEI/https://doi.org/10.13039/5011 00011033/and "FEDER a way of making Europe") and regional (regional (grant CIGRIS/2022/091 to MD) governments is acknowledged. The authors thank CONICET and CSIC for supporting their collaboration through a Project of International Cooperation (DD216/25). CAAP thanks CONICET for doctoral fellowship. MSUM thanks Comision de Investigaciones Cientificas for graduate training fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Broad-spectrum antiviral ferruginol analog affects the viral proteins translation and actin remodeling during dengue virus infection

  • Roa-Linares, Vicky C.
  • Betancur-Galvis, Liliana A.
  • Garcia-Blanco, Mariano A.
  • Gallego-Gomez, Juan C.
  • González-Cardenete, Miguel A|||0000-0002-8762-0426
[EN] Dengue virus infection is the most important arbovirosis around the world. To date, no antiviral drugs have been approved for its treatment. Host-targeted antivirals (HTA) have emerged as a promising strategy, because of their high barrier to resistance. Using plaque-forming unit assays, molecular docking, fluorescence microscopy, image analysis, and molecular/cellular assays, it was found that 18-(phthalimide-2-yl)-ferruginol, a semi-synthetic analog of the bioactive diterpenoid ferruginol, couples with high affinity to RhoA GTPase. In addition, this molecule dramatically reduced actin filament formation and induced cellular morphological changes, when added to cell cultures before or after infection, without effect on microtubules or intermediate filaments. RhoA activation in infected cells was affected when the compound was added after 6 h.p.i. Furthermore, this compound decreased dengue virus-2 (DENV-2) E protein, NS3 protein, and dsRNA as measured by fluorescence microscopy, and changes in the distribution pattern of these viral components. 18-(phthalimide-2-yl)-ferruginol treatment at 6 and 12 h.p.i. reduces the virus yield. Western blot and RT-qPCR assays reveal that this analog decreased viral protein translation. Flow cytometry and wound-healing experiments also hint that cellular effects prompted for this compound do not relate to early apoptotic events and they could be reversible. Overall, our findings strongly suggest that 18-(phthalimide-2-yl)-ferruginol has an HTA mechanism, possibly disrupting the polyprotein translation of DENV-2 via alteration of RhoA-mediated actin remodeling and other related cellular and viral processes., VCR-L acknowledges Institutional funding from CODI (Comitepara el Desarrollo de la Investigacion-Universidad de Antioquia, grant code 2014-1041) and to Alejandro Elejalde for graphic design support. This research was supported by the regional government "Generalitat Valenciana, Conselleria de Educacion, Universidades y Empleo", grant number CIAICO/2022/220 and the Universitat Politecnica de Valencia under a cooperation "ADSIDEO" research grant (AD1902). Financial support by the Spanish Ministry of Science and Innovation (CEX2021- 001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. JCG-G acknowledges to Universidad de Antioquia Full-Professor position (Vice-Rectorate of Teaching, Resolution # 16235). MAG-B acknowledges start-up funds from the University of Texas Medical Branch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic activation of N2O on promoted NiO based materials: Valorization by oxidative dehydrogenation of ethane

  • Sánchez-García, G.
  • Pérez-Calvo, A.
  • Sánchez-Tovar, R.
  • Dejoz, A.M.
  • Solsona, B.
  • Moreno-Torralbo, Beatriz Maria
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • López Nieto, José Manuel|||0000-0002-6960-3219
[EN] N2O-assisted Oxidative Dehydrogenation (ODH) of ethane is an interesting way of simultaneously obtaining a highly valuable raw material (ethylene) and the functionalization of a greenhouse gas (N2O). Unfortunately, over most of the catalytic systems, this reaction presents two main drawbacks: i) high yields to ethylene have hardly been reported; and ii) the catalytic activity highly decreases when replacing molecular oxygen by N2O. In the present article, it will be shown that with promoted NiO catalysts, and using N2O, high activity, comparable with that of conventional O2-assisted ODH of ethane, is achieved. Furthermore, the use of the appropriate dopant, such as niobium, allows high ethylene yields (40 %), with a selectivity to ethylene of 72 % at 55 % ethane conversion. Overall, the catalytic results obtained indicate that the presence/absence and the nature of the promoter determines the catalytic performance of NiO based catalysts and the selectivity to ethylene can be explained on the basis of the electrochemical properties of the catalysts, correlating with parameters such as the density of acceptor defects (cationic vacancies) and the charge-transfer resistance at the interfacial active sites of the catalysts. Interestingly, the most selective catalyst (i.e., Nb-doped NiO) is highly robust as it presents stable catalytic performance after 24 h online and Ni2+ species are not reduced to Ni0 even working at high temperatures in N2O-free conditions., The funding received for this study from the Spanish Ministry of Science and Innovation, projects PID2021-126235OB-C31 and PID2021-126235OB-C33 (funded by MCIN/AEI/10.13039/501100011033 and FEDER funds) and projects TED2021-130756B-C31 and TED2021-129555B-I00 (funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" by the European Union NextGenerationEU/PRTR) , is acknowledged. BMT, PC, and JMLN also thank CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033. G. Sanchez-Garcia is also grateful to the Generalitat Valenciana (CIACIF/2021/010) and A. Perez-Calvo to Ministerio de Ciencia, Innovacion y Universidades (FPU23/02557) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Defect-Engineered Metal-Organic Framework/Polyimide Mixed Matrix Membrane for CO2 Separation

  • Mashhadikhan, Samaneh
  • Amooghin, Abtin Ebadi
  • Masoomi, Mohammad Yaser
  • Sanaeepur, Hamidreza
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Defect-engineered metal-organic frameworks (MOFs) with outstanding structural and chemical features have become excellent candidates for specific separation applications. The introduction of structural defects in MOFs as an efficient approach to manipulate their functionality provides excellent opportunities for the preparation of MOF-based mixed matrix membranes (MMMs). However, the use of this strategy to adjust the properties and develop the separation performance of gas separation membranes is still in its early stages. Here, a novel defect-engineered MOF (quasi ZrFum or Q-ZrFum) was synthesized via a controlled thermal deligandation process and incorporated into a CO2-philic 6FDA-durene polyimide (PI) matrix to form Q-ZrFum loaded MMMs. Defect-engineered MOFs and fabricated MMMs were investigated regarding their characteristic properties and separation performance. The incorporation of defects into the MOF structure increases the pore size and provides unsaturated active metal sites that positively affect CO2 molecule transport. The interfacial compatibility between the Q-ZrFum particles and the PI matrix increases via the deligandation process, which improves the mechanical strength of Q-ZrFum loaded membranes. MMM containing 5 wt.% of defect-engineered Q-ZrFum exhibits excellent CO2 permeability of 1308 Barrer, which increased by 99 % compared to the pure PI membrane (656 Barrer) at a feed pressure of 2 bar. CO2/CH4 and CO2/N-2 selectivity reached 44 and 26.6 which increased by about 70 and 16 %, respectively. This study emphasizes that defect-engineered MOFs can be promising candidates for use as fillers in the preparation of MMMs for the future development of membrane-based gas separation applications., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union Next Generation EU PRTR-C17.I1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hexagonal Hybrid Bismuthene by Molecular Interface Engineering

  • Dolle, Christian
  • Oestreicher, Víctor
  • Ruiz, Alberto M.
  • Kohring, Malte
  • Wu, Mingjian
  • Sánchez-Santolino, Gabriel
  • Seijas-Da Silva, Alvaro
  • Alcaraz, Marta
  • Eggeler, Yolita M.
  • Spiecker, Erdmann
  • Canet-Ferrer, Josep
  • Weber, Heiko B.
  • Varela, María
  • Garnes-Portoles, Francisco
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] High-quality devices based on layered heterostructuresare typicallybuilt from materials obtained by complex solid-state physical approachesor laborious mechanical exfoliation and transfer. Meanwhile, wet-chemicallysynthesized materials commonly suffer from surface residuals and intrinsicdefects. Here, we synthesize using an unprecedented colloidal photocatalyzed,one-pot redox reaction a few-layers bismuth hybrid of "electronicgrade" structural quality. Intriguingly, the material presentsa sulfur-alkyl-functionalized reconstructed surface that preventsit from oxidation and leads to a tuned electronic structure that resultsfrom the altered arrangement of the surface. The metallic behaviorof the hybrid is supported by ab initio predictionsand room temperature transport measurements of individual nanoflakes.Our findings indicate how surface reconstructions in two-dimensional(2D) systems can promote unexpected properties that can pave the wayto new functionalities and devices. Moreover, this scalable syntheticprocess opens new avenues for applications in plasmonics or electronic(and spintronic) device fabrication. Beyond electronics, this 2D hybridmaterial may be of interest in organic catalysis, biomedicine, orenergy storage and conversion., This work has been supported by the European Union (ERC-2018-StG 804110-2D-PnictoChem & and ERC Proof of Concept Grant 101101079-2D4H2 to G.A.; ERC-2021-StG 101042680 2D-SMARTiES awarded to J.J.B.), the Spanish MICINN (PID2019-111742GA-I00, PID2020-115100GB-I00, MRR/PDC2022-133997-I00, TED2021-131347B-I00, and Excellence Unit Maria de Maeztu CEX2019-000919-M), and the Generalitat Valenciana (CIDEGENT/2018/001, CIDEGENT/2018/005, and CDEIGENT/2019/022). Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. M.K. and H.B.W. acknowledge support by the Deutsche Forschungsgemeinschaft (DFG), under Projektnummer 182849149 (SFB 953, projects B08 and B13). Electron microscopy work carried out at UCM (M.V., G.S.S.) sponsored by MICINN PID2021-122980OB-C51 and Comunidad de Madrid MAD2D-CM-UCM3. G.S.S. acknowledges financial support from Spanish MCI Grant Nos. RTI2018-099054-J-I00 (MCI/AEI/FEDER, UE) and IJC2018-038164-I. C.D. and Y.M.E. thank the cluster of excellence 3DMM2O funded by DFG under Germany's Excellence Strategy - 2082/1 - 390761711 for financial support. The authors thank Lukas Grunwald and Erich Muller for helpful discussions. A.M.R. thanks the Spanish MIU (Grant No FPU21/04195). A.S.-D. thanks the Universidad de Valencia, for an Atraccion del talento' predoctoral grant. F.G.-P. thanks ITQ, UPV-CSIC for concession of a contract (PAID 01-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sulfide organic polymers as novel and efficient metal-free heterogeneous Lewis acid catalysts for esterification reactions

  • Melero-Gutierrez, Manuel
  • Díaz, Urbano|||0000-0003-1472-8724
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Herein, we report on the synthesis of four organosulfide-based covalent organic polymers prepared via click processes, consisting of either S(N)2 (SOP-1 and SOP-3) or thiol-yne (SOP-2 and SOP-4) coupling reactions. Formation of the SOPs in high yields is confirmed by solid-state C-13 NMR and FTIR spectroscopies, while the sulfur contents of SOP-type materials confirm the expected C : S molar ratio for the formation of stoichiometric products. CO2 adsorption isotherms reveal the porosity of SOPs, with specific surface areas of up to 180 m(2) g(-1) and strongly dependent on the ligands used. The catalytic activity of SOPs is evaluated for carboxylic acid esterification reactions, obtaining high conversions and efficient recyclability. The proposed reaction mechanism consists of the activation of carboxylic acid by hypervalent SMIDLINE HORIZONTAL ELLIPSISO (n(O) -> sigma(S)*) interactions with sulfur centres of the SOPs, which increase the electrophilic character of the carboxylic carbon and facilitate the addition of the alcohol. Thus, SOPs constitute a novel class of metal-free heterogeneous Lewis acid (organo)catalysts., Financial support from the Spanish Ministry of Science and Innovation (PID2020-112590GB-C21 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. This study forms part of the Advanced Materials Program and was supported by MICIN with funding from European Union NextGeneration (PRTR-C17.I1) and by the Generalitat Valenciana (MFA/2022/003). M. M. acknowledges financial support from FPI PhD fellowship PRE2018-084071.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-nuclearity single-atom and supported metal cluster catalysts in ethylene and propylene hydroformylation

  • Garcia-Farpon, Marcos
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Olefin hydroformylation is one of the most significant examples of homogeneously catalyzed conversion processes. However, developing chemo/regio-selective and stable solid catalysts has remained a persistent challenge in heterogeneous catalysis. Particularly the design of solid catalysts for the hydroformylation of light, gaseous olefins, such as ethylene and propylene, has been extensively researched, given that the products from these processes are key players in the oxo-chemicals market. Additionally, developing selective, continuous gas-solid C2-3 olefin hydroformylation processes prospectively offers a reactive separation alternative to conventional and massively energy-intensive cryogenic distillation separation methods. In this review, we first assess the potential of reductive olefin hydroformylation as a cost-effective alternative to conventional cryogenic distillation processes for recovering value from industrial gas mixtures of ethylene and propylene. Taking a conventional ethylene splitter as a reference case, a reactive separation through ethylene reductive hydroformylation to 1-propanol is predicted to provide significant savings in terms of utility costs. Next, major advances in the design and development of solid catalysts for ethylene and propylene hydroformylation are surveyed, with an emphasis on single-atom catalysts (SACs) and supported metal nanoclusters. These catalysts have recently achieved hydroformylation activity and chemo/regio selectivity comparable to, or even surpassing, those traditionally exclusive to free molecular catalysts in solution. Different catalyst design strategies, including the heterogenization of metal coordination complexes in supported ionic liquid phase (SILP) catalysts and porous organic ligands (POLs), as well as the tuning of oxide-supported catalysts via the adjustment of metal-oxide interfacial effects or through nanoconfinement within zeolitic frameworks, are systematically reviewed and compared. Finally, conclusions are provided, alongside a critical perspective on fundamental and practical aspects that require particular attention to ensure rational and systematic progress toward optimized catalysts and reaction settings, ultimately paving the way for the heterogenization of light olefin hydroformylation processes., This work has received funding from the European Research Council (ERC-CoG, TANDEng, Grant Agreement Nr. 864195) . Parts of this work have received support by the Spanish Ministry of Science and Innovation, through grants CEX2021-001230-S and PID2022-140111OB-I00, funded by MCIN/AEI/10.13039/501100011033. M.G.F acknowledges support by the Ministry of Education of Spain through his predoctoral grant FPU17/04701. J. Prieto is acknowledged for his contributions to artwork design.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photo-thermal Catalytic CO2 Methanation by RuO x @MIL-101(Cr) with 9.2% Apparent Quantum Yield under Visible Light Irradiation

  • Ramirez-Hernandez, Juan Jose
  • Fernandes-de Almeida, Vitor
  • Ferrer Ribera, Rosa Belén
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
  • Vayá Pérez, Ignacio|||0000-0003-1682-9342
  • Garcia-Baldovi, Hermenegildo
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Abou-Khalil, Zahraa
  • Daturi, M
  • Clet, Guillaume
  • El-Roz, Mohamad
[EN] Solar-assisted gaseous CO2 hydrogenation to CH4 is a potential strategy for favoring the transition to net zero emissions. Here, we report the development of a series of efficient metal-organic frameworks with MIL-101(Cr or Fe) topology decorated with RuOx nanoparticles (ca. 0.2-2 wt %) as heterogeneous photocatalysts for the selective methanation of CO2 by H-2 under simulated sunlight irradiation. The activity of RuOx(1 wt %)@MIL-101(Cr) is between 3 and 50 times higher than related MOF-based photocatalysts under similar reaction conditions. Among the different photocatalysts, the optimized RuOx(2 wt %)@MIL-101(Cr) photocatalyst showed 98.1% CO2 conversion with 98.8% CH4 selectivity reaching a production rate of 7.85 mmol g(-1) h(-1) with 720 mW cm(-2) at 200 degrees C. Further, this photocatalyst exhibited a record apparent quantum yield of 9.2% at 600 nm and 200 degrees C after subtracting thermal activity contribution compared to any previous MOF- or other heterogeneous-based photocatalyst reported so far. The photocatalyst retained its activity and integrity upon reuse for about 110 h. Transient photocurrent, electrochemical impedance, photoluminescence, and laser flash photolysis spectroscopies together with additional photocatalytic experiments suggest the occurrance of dual photochemical and photothermal reaction pathways. The photocatalytic CO2 methanation reaction mechanism was further investigated using operando Fourier transform infrared spectroscopy., J.J.R.-H. thanks the Universitat Politecnica de Valencia for the Ph.D. financial support of the PAID-01-21 project. I.V. appreciates the support of Grant PID2020-115010RB-I00 funded by MICIU/AEI/10.13039/501100011033. H.G.B. appreciates the support of Grant No. RYC2022-037287-I funded by MCIN/AEI/1013039/501100011033. The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement No. 10102264. Funding for open access charge: CRUE-Universitat Politecnica de Valencia. A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). F.X.L.X the Spanish Ministry of Science and Innovation (PID2020-112590GB-C21, PID2023-146114NB-C21, and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) for support. This study forms part of the Advanced Materials Program and was supported by MICIN with funding from European Union NextGeneration (PRTR-C17.I1) and by the Generalitat Valenciana (MFA/2022/003). M.E.-R. acknowledges the Normandy Region and the European Union for financial support (project SuntoChem). S.N. appreciates the support received from Grant PID2021-123856OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural and electronic modulation by Ce-doping in MOF-derived In2O3@CeO2-ZrO2 catalysts for CO2 hydrogenation

  • Bracciotti, Edoardo
  • Salusso, Davide
  • Bertinetti, Stefano
  • Luque-Alvarez, Ligia A.
  • Bobadilla, Luis F.
  • Bordiga, Silvia
  • Rojas-Buzo, Sergio
  • López-Luque, Ivan|||0000-0002-3982-1100
  • Prieto González, Gonzalo|||0000-0002-0956-3040
  • Moliner Marin, Manuel|||0000-0002-5440-716X
[EN] Indium oxide (In2O3) has emerged as a promising catalyst for CO2 hydrogenation to methanol due to its exceptional selectivity compared with conventional Cu-based systems, which typically yield undesired byproducts despite higher conversion rates. However, the reduction of In2O3 under reaction conditions limits its long-term stability, motivating the development of robust oxide supports. In this work, we present a systematic study on the influence of cerium concentration in CeO2-ZrO2 supports on the performance of In2O3-based catalysts. A series of In2O3@Ce(100_ x)Zrx materials were synthesized via a scalable and reproducible MOF-templated approach using UiO-66(Ce/Zr) precursors and subsequent calcination. Comprehensive characterization by in situ PXRD, XAS and H2-TPR revealed that low cerium incorporation (approximate to 5 %) promotes unique Ce-Zr-In interfacial interactions, enhancing indium oxide dispersion and suppressing its reduction to metallic indium. Catalytic tests under CO2 hydrogenation conditions (25 bar, 513-573 K) demonstrated unprecedented methanol selectivity and stability for the low-Ce composition. These findings highlight the critical role of controlled Ce doping in tuning the structural and electronic properties of CeO2-ZrO2 supports and demonstrate the scalability of MOF-derived synthesis routes for designing next-generation catalysts for sustainable methanol production., This work has been supported under the National Recovery and Resilience Plan (NRRP) , Mission 4, Component 2, Investment 1.4-Call for tender No. 3138 of December 16, 2021 of the Italian Ministry of University and Research, financed by the European Union - NextGe-nerationEU [Award Number: National Sustainable Mobility Center CN00000023, named MOST, Concession Decree No. 1033 of June 17, 2022, adopted by the Italian Ministry of University and Research, Spoke 14 "Hydrogen and New Fuels"] and also by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34) and by the Spanish Ministry of Science and Innovation through the Severo Ochoa Program (CEX2021-001230-S, funding by MCIN/AEI/10.13039/5011000110 33) . The authors acknowledge the ESRF for providing beamtime at ID24-DCM beamline.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient and Selective Photocatalytic Transformation of CO2 to CO with Mo6 Clusters Supported on Fe-Doped g-C3N4

  • Hernandez-Niño, Jhon Sebastian|||0000-0002-6550-7107
  • Feliz Rodriguez, Marta|||0000-0002-4429-0551
[EN] The carbon dioxide reduction reaction (CO2RR) driven by sunlight is expected to become a sustainable way of producing high-value compounds in the future. To achieve this goal, affordable and efficient photocatalysts still need to be discovered. In this work, we show that near-IR luminescent octahedral molybdenum iodido clusters decorated with isonicotinato ligands, (Bu4N)2[Mo6I8(O2CC5H4N)6] (Mo6), once combined with iron-doped carbon nitride (Fe-g-C3N4), provide the Mo6/Fe-g-C3N4 nanostructured materials, which are able to photocatalytically produce carbon monoxide (CO) from CO2 with high efficiency and selectivity. In a plausible mechanism, the Mo6 cluster acts as a photosensitizer, and its pyridine groups interact coordinatively with the embedded iron atoms, thus promoting the electronic conduction to the catalytic iron sites of the nanohybrid. The materials were characterized analytically, texturally, structurally, and spectroscopically using techniques such as inductively coupled plasma (ICP), specific surface area measurements, UV¿vis¿NIR diffuse reflectance spectra (DRS), powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM) coupled with energy-dispersive X-ray spectroscopy (EDS), and photoluminescence. The CO2RR studies showed that this association induces a change in the selectivity and a significant increase in CO production compared to that produced separately by the Mo clusters and graphitic precursors. Considering the versatility of this building block strategy for preparing multicomponent hybrid nanomaterials, molybdenum metal clusters are regarded as promising catalysts for creating eco-friendly and cost-effective photocatalysts for the CO2RR, The authors thank funding resources from the Spanish Ministry of Science and Innovation (TED2021-130963B-C21, PID2021-123163OB-I00 and CEX2021-001230-S grants) funded by MCIN/AEI/10.13039/501100011033/ and FEDER, "A way of making Europe." J.S.H. gratefully acknowledges to Programa Santiago Grisolia (Consejo Superior de Investigaciones Cientificas and Generalitat Valenciana; grant number GRISOLIA/2021/054). The authors thank the technical team at the Instituto de Tecnologia Quimica for providing us with all the facilities for all the characterizations, equipment, and instrumentation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sub-nanometer Rh1+ oxide in zeolites catalyzes the hydroformylation reaction under counterbalancing cation control

  • Serrano-Maldonado, Jorge Alejandro|||0000-0003-3076-854X
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Singh, Amravati Shivaji
  • Manzorro, Ramon
  • Hernandez-Garrido, Juan C.
[EN] Rhodium (Rh)-supported zeolites are intensively studied as solid catalysts for the industrial hydroformylation reaction in order to replace the currently used soluble Rh catalysts. Here, we show that the counterbalancing cations of the zeolite, inherent to these aluminosilicates, significantly impact on the catalytic activity and selectivity of the hydroformylation reaction when sub-nanome ter Rh1+-oxide species, generated inside the zeolite after incorporation and calcination of simple Rh species, are employed as catalytic sites. A Rh-supported faujasitic structure-activity relationship is thus provided for the hydroformylation reaction, perhaps extensible to other reactions. The ligand-free Rh zeolites can now be rationally chosen for one or another alkene reactant and also to perform one-pot hydroformylation/acid catalyzed reactions, thus opening new ways to design solid catalysts for these paramount reactions., This work is part of the project PID2023-148441NB-I00 funded by MICIIN (Spain) . Thanks are also extended to the Severo Ochoa Centers of Excellence program (CEX2021-001230-S) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Zeolites catalyze the halogen exchange reaction of alkyl halides

  • Mingueza-Verdejo, Paloma
  • Hernández-Garrido, Juan Carlos
  • Vidal Moya, José Alejandro
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] Simple aluminosilicates, including NaX and NaY zeolites, catalyze the selective halogen exchange reaction between two different alkyl organohalides, either in batch or in flow, without any additive or solvent, by simply heating at 130 degrees C and with <5 wt% of solid catalyst. The reaction protocol tolerates different functional groups and gives two new organohalides in good yields. Mechanistic studies unveil the key role of the zeolite oxygen atoms and countercations, to trigger the heterolytic scission of the R-X bond and generate intermediate alkoxy and halide species, respectively, which recombine within the zeolite framework. These results open a new way to synthesize organohalides with simple solid catalysts and expand the use of aluminosilicates in organic synthesis., Financial support of the Spanish projects PID2020-115100GB-I00 and PID2019-107578GA-I00, the Juan de la Cierva Program (contract number IJC2018-036514-I) and the Severo Ochoa Centre of Excellence Program CEX2021-001230-S (funded by MCIINN except for the former, funded by MCIN/AEI/10.13039/501100011033MICIIN) is acknowledged. Financial support of the Generalitat Valenciana, Grupos Emergentes Program (GV/2021/138) is also acknowledged. P.M. thanks ITQ for a contract. The AC-STEM data were obtained at the DME-UCA node of the Spanish Unique Scientific and Technological Infrastructure (ICTS) of Electron Microscopy of Materials ELECMIM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lead-Free Bismuth Halide Perovskite Memristors: Low-Voltage Switching and Physical Modeling of Resistive Hysteresis

  • Kim, Soyeon
  • Rivera-Sierra, Gonzalo|||0009-0008-2651-9157
  • Bisquert, Juan|||0000-0003-4987-4887
  • Mengesha, Bitania Shiferaw
  • Iniguez, Benjamin
[EN] This work reports the resistive switching performance and physical modeling analysis of hysteresis in lead-free all-inorganic mixed halide perovskite memristors. Ag/Cs3Bi2I9(-)xBrx/ITO memristors with I-rich (x = 3) and Br-rich (x = 6) crystallize in a layered trigonal phase and form smooth and uniform films confirmed by XRD, SEM, and AFM analyses. Both devices exhibit reproducible bipolar switching with below 0.3 V SET/RESET voltages, ON/OFF ratios above 101, and excellent cycling and retention stability. Crucially, this study provides the first direct experimental validation of the conductance-activated quasi-linear memristor (CALM) framework in bismuth-based halide PSK memristors, showing quantitative agreement between measured and simulated I-V hysteresis. Electrical analysis combined with scan-rate-dependent I-V physical modeling reveals ion-migration-controlled filament dynamics. I-rich layers form uniform and stable filaments due to stronger Bi-I bonding and lower density of mobile halide vacancies, produced uniform and stable conductive filaments. In contrast, Br-rich memristors exhibit ultralow voltage operations enabled by enhanced vacancy mobility, albeit with slightly broader switching thresholds. These findings demonstrate that compositional engineering in Pb-free bismuth PSK enables a balance between low-voltage operation and stable switching by the incorporation of Br- ions. The combined experimental-modeling approach establishes a robust lead-free materials platform for next-generation energy-efficient non-volatile memory and neuromorphic electronics., This work was supported by Grant No. EUR2022-134045 funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. S.-Y.K., G.R.-S., and J.B. also thank the European Research Council (ERC) via Horizon Europe Advanced Grant Agreement No. 101097688 ("PeroSpiker"). Additional instituional support from the Severo Ochoa Excellence Program CEX2021-001230-S, funded by MCIN/AEI/10.13039/501100011033, is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Activation of H2O2, PMS, and PDS over anatase TiO2-supported photocatalysts for efficient pollutant mineralization in water

  • Diego-López, Ander|||0000-0001-5947-9579
  • Tamarit-Mayo, Lorena
  • Bosca Mayans, Francisco
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Cabezuelo, Oscar
[EN] Mineralization efficiency is a key performance descriptor for heterogeneous photocatalysts in the removal of organic pollutants from water. Although the use of radical promoters can enhance the mineralization process, their effectiveness is highly dependent on the nature of the reactive species generated and, in some cases, may even lead to reduced mineralization efficiency. In this work, a supported anatase-TiO2 photocatalyst was used to investigate the mineralization of ortho-phenylphenol (OPP) under UVA irradiation in the presence of three radical promoters: H2O2, peroxymonosulfate (PMS), and peroxydisulfate (PDS). For this purpose, a core@shell SiO2@TiO2 photocatalyst was synthesized and thoroughly characterized to relate its structural and surface properties to its ability to activate these radical promoters. Notably, photocatalytic experiments showed that OPP photodegradation and total organic carbon (TOC) removal were not directly correlated, indicating that fast pollutant degradation does not necessarily imply efficient mineralization. Accordingly, only PMS significantly improved OPP mineralization efficiency of bare SiO2@TiO2, achieving a conversion of ~95¿% within 2¿h. Electron paramagnetic resonance (EPR) experiments revealed the main radicals generated in each system, providing mechanistic insights that were further corroborated by the differing reactivity of the visible-light-responsive ligand-to-metal charge-transfer (LMCT) complexes formed on the SiO2@TiO2 photocatalyst surface. This study provides valuable guidelines for future research on the characterization and design of photocatalytic systems that utilize radical promoters., The authors would like to acknowledge the Spanish Ministry of Science, Innovation, and Universities (PID2023-151872OB-I00, PID2019 110441RB-C33 and TED2021 131952B-I00, funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR). This research was supported by the CLEAN- LAGOON project (PROMETEO/CIPROM622 2024 49). Financial support by the Spanish Ministry of Science and Innovation (CEX2021 001230-S grant funded by MCIN/AEI/10.13039/ 501100011033) is gratefully acknowledged. A. Diego-Lopez and O. Cabezuelo are indebted to the Universitat Politecnica de Valencia for the corresponding Predoctoral FPI fellowship (FPI-UPV/Subprograma 1). L. Tamarit acknowledges Universitat Politecnica de Valencia for her postdoctoral contract (PAID-10-24). The authors would like to acknowledge the Servei de Microscopia Electronica from the Universitat Politecnica de Valencia (UPV) for their support in materials characterization and sample preparation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adjusting the Crystallization of Tin Perovskites through Thiophene Additives for Improved Photovoltaic Stability

  • Solis, Omar E.
  • Mínguez-Avellán, Miriam
  • Betancur, Pablo F.
  • Sánchez-Alarcón, Raul I.
  • Martínez-Pastor, Juan P.
  • Ripolles, Teresa S.
  • Abargues, Rafael
  • Isabelle Rodriguez|||0000-0001-5479-2494
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] Tin-based perovskites (Sn-PVK) are promising lead-free alternatives for efficient photovoltaic technology, but they face challenges related to bulk and surface defects due to suboptimal crystallization and Sn2+ oxidation. Introducing thiophene-2-ethylammonium halides (TEAX, where X = I, Br, Cl) improves FASnI3 crystallization and reduces Sn4+ formation. This is achieved by adjusting the crystallization dynamics through the formation of a complex between S and Sn during the preparation of the precursor solution, which also inhibits Sn2+ oxidation in the resulting films. In solar cells, these additives boost power conversion efficiency (PCE) from 6.6% (without additives) to 9.4% (using TEABr), with further enhancement to 12% by adjusting selective contacts. The addition of TEAX also increases the Sn2+ content, outperforming control. Devices with TEABr maintained over 95% of their initial PCE after 2000 h in N2 under continuous operation with 1 sun simulated illumination., This work was made possible by the SANTIAGO GRISOLIAprogram of the Valencian Community of Spain under theproject GRISOLIAP/2021/112. We acknowledge the supportof the Spanish MINECO through the project Nirvana (no.PID2020-119628RB-C31) by MCIN/AEI/10.13039/501100011033. Also, we acknowledge the financial supportof Generalitat Valenciana through the CIDEGENT contracts(ref: CIDEGENT/2021/044 and CIDEXG/2022/34), CIA-POS 2022/018 grant. The work was partially funded byMCIN/AEI through project TED2021-131600B-C32 andgrant CNS2023-144270 funded by MCIN/AEI/ 10.13039/501100011033 by European Union NextGenerationEU/PRTR . Financial support by the Spanish Ministry of Scienceand Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Alkene Cross-Metathesis with 2,5-Dimethyl-2,4-Hexadiene Enables Isobutylenyl/Prenyl Functionalizations and Rubber Valorization

  • Mingueza-Verdejo, Paloma
  • Rodríguez-Nuévalos, Silvia|||0000-0002-5361-1169
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] 2,5-Dimethyl-2,4-hexadiene is a readily available and easily managable compound, whose symmetric and polymethylated dienic structure should be prone to engage in cross-metathesis reactions with other alkenes, but this has not been apparently exploited so far. Here we show that this reactant enables the easy synthesis of tri- and tetra-susbtituted alkenes (i. e. isobutylenyl and prenyl groups) from simple alkenes under mild reaction conditions, not only with the conventional 2nd generation Grubbs catalyst but also with other Grela-type catalyts such as StickyCat,TM AquaMetTM and GreenCatTM. The use of liquid and low volatile 2,5-dimethyl-2,4-hexadiene avoids the use of gaseous alkene reactants and, besides, showcases the reactivity of polyisoprene (rubber), thus allowing to optimize the reaction conditions for rubber upcycling, after metathesis reaction of the pristine or used polymer with simple alkenes. These results bring low volatile isoprene-type compounds as privileged poly-substituted reactants for alkene cross-metathesis reactions.; 2,5-Dimethyl-2,4-hexadiene is presented here as a suitable and selective reactant for delivering either prenyl or isobutylenyl groups to alkenes through a cross-metathesis reaction. The process smoothly operates at room temperature, give high yields of products, includes a late-stage transformation, and enables the valorization of real samples of recycled rubber. image, This work is part of the project PID2020-115100GB-I00 funded by MCIN/AEI/10.13039/501100011033MICIIN (Spain). Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The work has also been funded by Generalitat Valenciana (INNEST/2022/20 from Agencia Valenciana de la Innovacio). P.M.-V. thanks ITQ, UPV-CSIC for concession of a contract (PAID 01-20). S.R.-N. thanks Agencia Valenciana de la Innovacio for a contract (INNEST/2022/20). J.O.-M. thanks the MICIIN for the concession of the Ramon y Cajal contract RYC2022-036154-I (funded by MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the surface terminal groups on the efficiency of two-electron oxygen reduction reaction by iron single atoms on Ti3C2Tx (Tx=Cl, Br, NH) MXene

  • Kruger, Dawid Daniël
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Delgado, Juan Jose
  • Recio, F. Javier
[EN] Two Ti3C2 MXenes having single atom Fe were prepared from a Ti3AlC2 precursor by Al etching using an FeX2 (X = Cl, Br) Lewis acid as an etching reagent in NaCl/KCl molten salt. After removal of the excess Fe metal using concentrated aqueous HX solution, the resulting MXenes having Cl or Br surface terminations were concomitantly doped with single Fe atoms. A third sample was prepared from Fe(SA)-Ti3C2Brx by exchanging Br with -NH- using LiNH2 in molten salt. The presence of single atom Fe was determined by aberration corrected high-angle annular dark-field scanning transmission electron microscopy (AC-HAADF-STEM) with atomic resolution where isolated Fe atoms were observed. These Fe(SA)-Ti3C2Tx materials exhibit electrocatalytic activity for the oxygen reduction reaction (ORR), with the selectivity to H2O2 depending on the surface termination and the electrolyte pH. Involvement of Fe SA was inferred from the onset potential of the ORR and the Fe(III)/Fe(II) reduction potential and the change of the Tafel slope in this region. Under the best conditions, at pH 13, Fe(SA)-Ti3C2(NH)(x) exhibits for the ORR an average electron transfer number (n) of 2.5, which corresponds to an H2O2 generation efficiency of 75%; these data compare well with those of the best Fe single-atom electrocatalysts., Financial support was provided by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-126071OB-C21\ and PID2021-123431OB-I00 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). The European Commission (ERC Adv., Grant Discovery) is also acknowledged. We thank the Advanced Microscopy Center of the University of Cadiz for granting instrument time.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Carbonyl-Olefin/Alkyne Metathesis Reactions Catalyzed by Bifunctional H-USY Zeolites

  • Mingueza-Verdejo, Paloma
  • Velázquez-Ojeda, David
  • Bilanin-Artigado, Cristina
  • Garnes-Portoles, Francisco
  • Rodríguez-Nuévalos, Silvia|||0000-0002-5361-1169
  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] Metal-, organo-, and proton-catalyzed carbonyl-olefin/alkyne metathesis reactions have gained relevance in organic synthesis during the past decade, but their potential implementation in high-volume processes (i.e., in flow) is severely hampered by the lack of a general, robust, easily separable, and nontoxic solid catalyst. Both Brønsted and Lewis acid sites inside molecular-sized soluble cages seem to be involved during the catalytic process in solution; thus, a similar bifunctional acid solid catalyst, in a confined space, could play the desired catalytic role. We show here that commercially available, ultrastabilized aluminosilicate acid faujasites (H-USY zeolites), containing Brønsted and Lewis acid sites in microporous channels and cavities, catalyze a variety of intra- and intermolecular metathesis reactions between aldehydes/ketones and alkenes/alkynes, with diverse structural patterns, in reasonable yields and under mild reaction conditions. The zeolite can be easily recovered after the reaction in batch and reused or implemented in in-flow processes for continuous synthesis of the metathesis products. These results open the way to designing carbonyl¿olefin/ alkyne metathesis reactions with simple solid catalysts., Grants PID2023-148441NB-I00, PID2023-148367OB-I00, RYC2022-036154-I and Severo Ochoa program CEX2021-001230-S funded by MICIU/AEI/10.13039/501100011033 are gratefully acknowledged. The work has also been funded by Generalitat Valenciana (INNEST/2022/20 from Agencia Valenciana de la Innovació). P.M.-V. thanks ITQ, UPV-CSIC, for a contract (PAID 01-20). F.G.-P., S.R.-N., and C.B. thank Agencia Valenciana de la Innovació for a contract (INNEST/2022/20 and UCIE/2022). The authors also thank the Electron Microscopy Service of the UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Uncatalyzed aerobic epoxidation of liquid alkyl alkenes

  • Hervàs-Arnandis, Susi
  • Garnes-Portoles, Francisco
  • Rodríguez-Nuévalos, Silvia|||0000-0002-5361-1169
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] Researchers have investigated for decades a suitable catalyst to selectively synthesize epoxides from alkenes with air. Here we show that a selective aerobic epoxidation of industrial alkyl alkenes in liquid phase occurs without any catalyst, solvent nor additive, just placing the neat alkene under 3-5 bar of O2 and heating between 100 and 200 degrees C. The reaction can be performed in either an autoclave, a stirring vessel with air bubbling or even a simple open flask, provided that any metal piece is not in contact with the reaction. Alkyl epoxides are directly obtained, after air venting, in yields and selectivity up to 90%. The simplicity of the set-up (just the neat liquid alkene and air) allows to engage the epoxidation reaction with either a previous alkene formation (upstreaming) or a later epoxide opening (downstreaming) reactions, to achieve a variety of industrially-relevant organic products in one-pot., This work is part of the project PID2023-148441NB-I00 funded by MCIN/AEI/10.13039/501100011033MICIIN (Spain). Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. The work has also been funded by Generalitat Valenciana (Prometeo Grupos de Investigacion de Excelencia PROMETEU/2021/054, and INNEST/2022/20 from Agencia Valenciana de la Innovacio). Funding for open acces charge: Universitat Politecnica de Valencia. S.R.-N. thanks Agencia Valenciana de la Innovacio for a contract. J.O.-M. thanks the MICIIN for the concession of the Ramon y Cajal contract RYC2022-036154-I (funded by MCIN/AEI/10.13039/501100011033). S.H.-A. and F.G.-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of Tetrahydrofuran Derivatives from 5-Hydroxymethylfurfural: Selective Ring Hydrogenation of HMF and Cascade Transformations over Pd Supported on Amino-Modified ITQ-2 Zeolite

  • Moriana-Herraiz, Carlos
  • Arias, Karen S.|||0000-0001-5649-7392
  • Climent Olmedo, María José|||0000-0002-3575-2902
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Iborra Chornet, Sara|||0000-0003-1758-5095
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] 5-Hydroxymethylfurfural (HMF) has been efficiently hydrogenated into the highly valuable 5-hydroxymethyltetrahydrofurfural (HMTHF) through the selective hydrogenation of the furan ring using Pd supported on pure silica ITQ-2 zeolite functionalized with amino groups (Pd-NITQ-2). Highly dispersed nanosized Pd nanoparticles were generated on the amino functionalized support, which exhibits high activity and selectivity to HMTHF. Yields up to 97% (99% selectivity) of HMTHF were achieved by working at room temperature under 10 bar hydrogen using ethanol as a solvent. Comparatively, Pd supported over nonfunctionalized ITQ-2 (Pd-ITQ-2) showed 17 times lower activity than Pd-NITQ-2. The IR of CO titration studies showed that on Pd-ITQ-2, catalyst oxophilic Pd species (Pd delta+) are generated, which is related to their lower activity in H2 activation and therefore their lower activity in the hydrogenation of the furan ring with respect to the Pd-NITQ-2 sample. The effect of Pd loading on NITQ-2, as well as the solvent effect, was studied. The optimized catalyst ((1%)-Pd-NITQ-2) was stable and could be reused for seven consecutive cycles, practically maintaining activity and selectivity. Finally, the optimized catalyst was applied to three different two-step cascade processes to obtain tetrahydrofuran substituted Knoevenagel adducts, N-substituted tetrahydrofurfurylamines, and tetrahydrofuran-substituted benzimidazole derivatives., This work has been funded by the Spanish Ministry of Science and Innovation through the "Severo Ochoa Program" (CEX-2021-001230-S), the PID2021-126235OB-C31, and PID2021-125897OB-I00 (MCIU/AEI/) 10.13039/501100011033 by "ERDF A way of making Europe project. C.M. thanks the Severo Ochoa program for predoctoral fellowships. The authors also thank the Microscopy Service of UPV for the TEM measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Co2MnO4/Ce0.8Tb0.2O2-δ Dual-Phase Membrane Material with High CO2 Stability and Enhanced Oxygen Transport for Oxycombustion Processes

  • Laqdiem-Marin, Marwan
  • García-Fayos, Julio
  • Carrillo-Del Teso, Alfonso Juan
  • Almar-Liante, Laura|||0000-0001-5103-3812
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Fabuel Robledo, Maria
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Oxygen transport membranes (OTMs) are a promising oxygen production technology with high energy efficiency due to the potential for thermal integration. However, conventional perovskite materials of OTMs are unstable in CO2 atmospheres, which limits their applicability in oxycombustion processes. On the other hand, some dual-phase membranes are stable in CO2 and SO2 without permanent degradation. However, oxygen permeation is still insufficient; therefore, intensive research focuses on boosting oxygen permeation. Here, we present a novel dual-phase membrane composed of an ion-conducting fluorite phase (Ce0.8Tb0.2O2-delta, CTO) and an electronic-conducting spinel phase (Co2MnO4, CMO). CMO spinel exhibits high electronic conductivity (60 Scm(-1) at 800 degrees C) compared to other spinels used in dual-phase membranes, i.e., 230 times higher than that of NiFe2O4 (NFO). This higher conductivity ameliorates gas-solid surface exchange and bulk diffusion mechanisms. By activating the bulk membrane with a CMO/CTO porous catalytic layer, it was possible to achieve an oxygen flux of 0.25 mLmin(-1)cm(-2) for the 40CMO/60CTO (%(vol)), 680 mu m-thick membrane at 850 degrees C even under CO2-rich environments. This dual-phase membrane shows excellent potential as an oxygen transport membrane or oxygen electrode under high CO2 and oxycombustion operation., Financial support by the Spanish Ministry of Science and (PID2022-139663OB-I00 and CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) by MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transicion Energetica Sostenible+ (PTI-TRANSENER+). Also, the Universitat Politecnica de Valencia (UPV) is gratefully acknowledged. The authors would like to thank Dr. J. L. Jorda for the help with XRD. In addition, the support of the Servicio de Microscopia Electronica of the UPV is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Domino dehydration/intermolecular (enantioselective) ketone-ene reactions catalysed by a simple solid in batch and in flow

  • Espinosa-López, Miguel
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] The intermolecular carbonyl-ene reaction of ketones is still considered a challenge in organic chemistry, particularly with reusable solid catalysts, and implemented in a domino reaction. Herein, we show that the extremely cheap and non-toxic solid salt MgCl2 catalyzes the reaction of trifluoromethyl pyruvates not only during the conventional carbonyl-ene reaction with various aromatic and alkyl alkenes (in very high yields, up to >99%) but also in a domino reaction with the corresponding alcohols (precursors to the alkenes) in similar good yields. The solid can be reused in both cases without any erosion of the catalytic activity and can be employed in an in-flow process to maximize the reaction throughput. Besides, the reaction can be performed under solventless reaction conditions. Addition of a catalytic amount of chiral binaphthyl hydrogen phosphate allows carrying out the reaction with a reasonable enantiomeric excess (up to >70%) and in flow, in a rare example of enantioselective solid-catalyzed domino carbonyl-ene reaction using a cheap, simple, readily available and physically mixed catalytic solid. The MgCl2-catalytic system is also active in the industrially relevant citronellal-to-isopulegol carbonyl-ene reaction. These results pave the way to design sustainable domino carbonyl-ene reactions with extremely cheap solid catalysts., Financial support by the projects PID2020-115100GB-I00 (funded by Spanish MCIINN, MCIN/AEI/10.13039/501100011033MICIIN) and Severo Ochoa centre of excellence program (CEX2021-001230-S, also from MCIINN) is acknowledged. The work has also been funded by Generalitat Valenciana (Prometeo Grupos de Investigacion de Excelencia PROMETEU/2021/054) and M. E. thanks to the Universitat de Valencia (PROMETEU/2021/054) for the concession of a contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Single-atom Cu catalysts for the oxidative coupling of styrenes with aryl sulfones: from salts and zeolites to MOFs

  • Bilanin-Artigado, Cristina
  • Zheng, Yongkun
  • Pardo, Emilio
  • Vidal Moya, José Alejandro
  • Mon-Conejero, Marta|||0000-0002-1983-1096
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] Oxidative couplings in organic synthesis are typically performed with unrecoverable precious metal catalysts in solution. Here we show that CuCO3, Cu-supported zeolites and Cu-metal organic frameworks (MOFs) can replace AgNO3 as a catalyst for the oxidative coupling of styrenes with aryl sulfones, to give styrenyl sulfones. The single Cu atoms supported in zeolites show higher catalytic activity than the Cu salt as the basicity of the zeolite framework increases, to match the carbonate salt, and when embedded directly into a MOFs ' walls with oxamate ligands (thus with the proper electronic environment) they can be recycled for at least five times without any depletion in catalytic activity. These results showcase not only the substitution of a noble metal (Ag) by an abundant metal (Cu) in a metal-catalyzed oxidative coupling reaction, but also going from a salt to a supported solid catalyst, of high significance from a sustainable point of view., Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. This work was also supported by the MICIIN (Spain) through projects TED2021-130465B-I00, PID2020-115100GB-I00, PID2019-104778GB-I00 and "Maria de Maeztu" CEX2019-000919-M. The Generalitat Valenciana (Project PROMETEO/2021/054) is also acknowledged. E.P. acknowledges the financial support of the European Research Council under the European Union's Horizon 2020 research and innovation programme/ERC Grant Agreement No 814804, MOF-reactors. M.M. thanks MICIIN from a contract under the Juan de la Cierva program (FJC2019-040523-I) . C.B. thanks ITQ/UPV-CSIC for a contract (PAID 01-20) . Y.Z. thanks to the China Scholarship Council (CSC No: 202009350009) for a Ph.D. fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-Pot Synthesis of Terminal Alkynes from Alkenes

  • Bilanin-Artigado, Cristina
  • Singh, Amravati Shivaji
  • Martínez-Belenguer, Lluis
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] The direct synthesis of terminal alkynes from widely available terminal alkenes is an unmet challenge in organic synthesis. Here, we show that alkyl and aromatic terminal alkenes can be converted to the corresponding alkynes in a one-pot process consisting of a Ru-catalyzed dehydrogenative hydrosilylation, followed by an oxidative dehydrogenative reaction of the vinyl silane intermediate, enabled by the combination of PhIO with BF3. This formal alkene dehydrogenation reaction with commercially available reagents and under mild reaction conditions gives access to terminal alkynes in a simple manner, including acetylene., Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033, and PID2020-115100GB-I00) is gratefully acknowledged. C.B. thanks ITQ/UPV-CSIC for a contract (PAID 01-20). A.S.S. also thanks ITQ for the concession of a contract.