Pasar al contenido principal

MATERIALES HIBRIDOS MULTI-COMPONENTE BASADOS EN EL ENSAMBLAJE DE UNIDADES DE ESTRUCTURA FUNCIONALES. APLICACIONES (FOTO)CATALITICAS Y NANOTECNOLOGICAS

PID2023-146114NB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel DMAP@Mesoporous Silica Hybrid Heterogeneous Catalysts for the Knoevenagel Condensation: Greener Synthesis through Eco-friendly Solvents

  • Brito, Julio C. Fernandes P.
  • Travagin, Fabio
  • Barbero, Mauro
  • Giovenzana, Giovanni B.
  • Miletto, Ivana
  • Gianotti, Enrica
  • Esteban-Barrera, Cristina|||0009-0007-7940-9018
  • Díaz, Urbano|||0000-0003-1472-8724
  • Velty, Alexandra|||0000-0002-8263-4570
[EN] This article reports a sustainable synthesis of a novel organic-inorganic hybrid catalysts, featuring 4-(dimethylamino)pyridine (DMAP) immobilized onto mesoporous MCM-41 silica and amorphous Aerosil silica supports. Using (+/-)-2-methyltetrahydrofuran (MeTHF), a bio-based solvent, the covalent binding of DMAP to silica surfaces was achieved, reducing reliance on traditional petroleum-based solvents like toluene. The DMAP-functionalized hybrid catalysts, characterized through XRPD, TGA/DTA, FE-SEM, and FT-IR, demonstrated effective catalytic performance in the Knoevenagel condensation, a reaction relevant in producing fine chemicals and pharmaceuticals. The mesoporous MCM-41-supported catalyst exhibited superior activity due to its high surface area and ordered porous structure, with 97 % yield and 99 % selectivity. Stability and reusability were validated through leaching and recycling tests, confirming minimal DMAP leaching and robust catalytic performance over consecutive cycles. This green synthetic pathway underscores the potential of hybrid catalysts in advancing sustainable chemistry, promoting reduced energy consumption, and supporting a circular economy through recyclable, highly active catalysts in eco-friendly solvents. These findings demonstrate that MCM-41-supported DMAP hybrids are viable candidates for eco-friendly applications., C.E, U.D and A.V. are grateful for financial support by Spanish Ministry (projects PID2023-146114NB-C21 and CEX2021-001230-S) and by Generalitat Valenciana (MFA/2022/003). Open Access publishing facilitated by Universita degli Studi del Piemonte Orientale Amedeo Avogadro, as part of the Wiley - CRUI-CARE agreement.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sustainable Knoevenagel condensation of lignin-derived aldehydes over basic mesoporous silica

  • Brito, Julio Cesar Fernandes P.
  • Ancora, Gioele
  • Gianotti, Enrica
  • Díaz, Urbano|||0000-0003-1472-8724
  • Velty, Alexandra|||0000-0002-8263-4570
[EN] The sustainable valorization of biomass-derived molecules requires efficient, robust, and recyclable catalytic systems. In this study, amine-functionalised mesoporous silica nanoparticles (APTES@MSNs) were developed and investigated as heterogeneous base catalysts for the Knoevenagel condensation of lignin-derived aromatic aldehydes. Mesoporous silica nanoparticles were selected as supports due to their high surface area, ordered mesoporous structure, and tunable surface chemistry, enabling the stable grafting of organic functionalities. Postsynthetic functionalisation with (3-aminopropyl)triethoxysilane introduced accessible primary amine groups that act as basic catalytic sites, yielding a hybrid organic-inorganic material with high structural stability. The catalytic performance of APTES@MSNs was evaluated using vanillin, syringaldehyde, and 4-hydroxybenzaldehyde as representative bio-based substrates. Key reaction parameters, including solvent, temperature, and catalyst loading, were systematically examined to identify mild and environmentally benign operating conditions. The potential of amine-functionalised mesoporous silicas as sustainable heterogeneous catalysts is highlighted for the upgrading lignin-derived platform molecules within a circular chemistry framework., Dr. Gioele Ancora holds a PhD career grant supported by Next Generation EU - MUR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Zirconium-containing Metal-Organic Frameworks (MOFs) as catalysts for biomass conversion

  • Rapeyko, Anastasia|||0000-0002-8309-3702
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] In this work, we review some illustrative examples to evidence the potential of two archetypal Zr-containing MOFs, UiO-66 and MOF-808, as heterogeneous catalysts for converting biomass-derived products into valuable chemicals. The reactions are organized in three blocks, depending on the biomass source: carbohydrates, lipids, and other sources. Through this review, we will show that the chemical properties of these two Zr-MOFs are significantly different in terms of the nature and strength of acid sites, which largely depends on the number of missing linker defects of the solid and its hydration state. While hydrated UiO-66 bears relatively strong Br & oslash;nsted-induced acid sites, dehydrated MOF-808 is more than competent as a Lewis acid catalyst. Therefore, we will pick one or the other catalyst depending on the particular demands of the catalytic transformation that we want to carry out., Financial support from the Spanish Ministry of Science and Innovation (PID2020-112590GB-C21, PID2023-146114NB-C21, and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. This study forms part of the Advanced Materials Program and was supported by MICIN with funding from European Union NextGeneration (PRTR-C17.I1) and by the Generalitat Valenciana (MFA/2022/003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photo-thermal Catalytic CO2 Methanation by RuO x @MIL-101(Cr) with 9.2% Apparent Quantum Yield under Visible Light Irradiation

  • Ramirez-Hernandez, Juan Jose
  • Fernandes-de Almeida, Vitor
  • Ferrer Ribera, Rosa Belén
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
  • Vayá Pérez, Ignacio|||0000-0003-1682-9342
  • Garcia-Baldovi, Hermenegildo
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Abou-Khalil, Zahraa
  • Daturi, M
  • Clet, Guillaume
  • El-Roz, Mohamad
[EN] Solar-assisted gaseous CO2 hydrogenation to CH4 is a potential strategy for favoring the transition to net zero emissions. Here, we report the development of a series of efficient metal-organic frameworks with MIL-101(Cr or Fe) topology decorated with RuOx nanoparticles (ca. 0.2-2 wt %) as heterogeneous photocatalysts for the selective methanation of CO2 by H-2 under simulated sunlight irradiation. The activity of RuOx(1 wt %)@MIL-101(Cr) is between 3 and 50 times higher than related MOF-based photocatalysts under similar reaction conditions. Among the different photocatalysts, the optimized RuOx(2 wt %)@MIL-101(Cr) photocatalyst showed 98.1% CO2 conversion with 98.8% CH4 selectivity reaching a production rate of 7.85 mmol g(-1) h(-1) with 720 mW cm(-2) at 200 degrees C. Further, this photocatalyst exhibited a record apparent quantum yield of 9.2% at 600 nm and 200 degrees C after subtracting thermal activity contribution compared to any previous MOF- or other heterogeneous-based photocatalyst reported so far. The photocatalyst retained its activity and integrity upon reuse for about 110 h. Transient photocurrent, electrochemical impedance, photoluminescence, and laser flash photolysis spectroscopies together with additional photocatalytic experiments suggest the occurrance of dual photochemical and photothermal reaction pathways. The photocatalytic CO2 methanation reaction mechanism was further investigated using operando Fourier transform infrared spectroscopy., J.J.R.-H. thanks the Universitat Politecnica de Valencia for the Ph.D. financial support of the PAID-01-21 project. I.V. appreciates the support of Grant PID2020-115010RB-I00 funded by MICIU/AEI/10.13039/501100011033. H.G.B. appreciates the support of Grant No. RYC2022-037287-I funded by MCIN/AEI/1013039/501100011033. The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement No. 10102264. Funding for open access charge: CRUE-Universitat Politecnica de Valencia. A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). F.X.L.X the Spanish Ministry of Science and Innovation (PID2020-112590GB-C21, PID2023-146114NB-C21, and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) for support. This study forms part of the Advanced Materials Program and was supported by MICIN with funding from European Union NextGeneration (PRTR-C17.I1) and by the Generalitat Valenciana (MFA/2022/003). M.E.-R. acknowledges the Normandy Region and the European Union for financial support (project SuntoChem). S.N. appreciates the support received from Grant PID2021-123856OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hierarchically structured mixed-linker HKUST-1 metal-organic frameworks as catalysts: one-pot synthesis of quinazolines

  • Nowacka, Anna Elzbieta
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Hierarchically structured HKUST-1 compounds have been prepared via a mixed-linker strategy starting from mixtures of trimesic (BTC) and 5-hydroxyisophthalic (OH-IP) acids in different proportions. Unlike purely microporous pristine HKUST-1, the mixed-linker compounds feature a hierarchical micro-/ mesoporous system in which mesopores account for up to 40% of the total pore volume of the solid. The creation of mesopores is reflected by the appearance of deep trenches running in well-defined directions, parallel to the edges of the octahedral crystal. This demonstrates that point defects introduced by the incorporation of OH-IP are not distributed randomly throughout the framework, but they tend to coalesce into line defects along the (110) direction. The creation of such a hierarchical system of mesopores translates into a higher catalytic activity of mixed-linker MOFs with respect to pristine HKUST-1 for the conversion of bulky substrates, as we showed for the synthesis of quinazoline by oxidative coupling of benzylamine and 2-aminoacetophenone with tert-butyl hydroperoxide., Financial support from the Spanish Ministry of Science and Innovation (PID2023-146114NB-C21 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. This study forms part of the Advanced Materials Program and was supported by MICIN with funding from European Union NextGeneration (PRTR-C17.I1) and by the Generalitat Valenciana (MFA/2022/003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring the structure and photocatalytic properties of [1] benzothieno [3,2-b] [1] benzothiophene (BTBT)-based porous organic polymers

  • Borrallo-Aniceto, M. Carmen
  • Gonzalez-Aguilera, Laura
  • Ferrer, Maria Luisa
  • Iglesias, Marta
  • Maya, Eva M.
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] The organic semiconductor [1]benzothieno[3,2-b][1]benzothiophene (BTBT) has been incorporated into porous organic polymers to create heterogeneous photocatalysts with tunable structural and electronic properties. In this study, four BTBT-based polymeric networks, BTBT-HCP, BTBT-CTF, BTBT-CMP, and BTBT-PAF were synthesized using different strategies, including Friedel-Crafts reactions and palladium-catalyzed cross-coupling methods. The resulting materials exhibited distinct thermal and optical properties, with the latter showing a strong correlation with their catalytic performance. All four photocatalysts were evaluated in the photooxidation of aromatic alcohols. Among them, BTBT-CTF, which has direct bonds between the BTBT and triazine units, demonstrated the highest efficiency and was further employed in a one-pot, two-step reaction for the photo-oxidative synthesis of benzimidazoles. This process combined the initial photooxidation of aromatic alcohols with a subsequent condensation with o-phenylenediamine without isolating the intermediate aldehyde. These results highlight the potential of BTBT-based materials for sustainable photooxidations and light-driven heterocyclic synthesis., This research was funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE through PID2023-146114NB-C22, PID2023-146114NB-C21, PID2024-155161OB-I00 projects. Authors acknowledge the Severo Ochoa Centers of Excellence program through Grant CEX2024-001445-S.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-Pot Synthesis of Abietane-Type Hydroxamic Acids: Process Optimization and Mechanistic Insights

  • Mendoza-Hernández, William Ernesto
  • Díaz, Urbano|||0000-0003-1472-8724
  • González-Cardenete, Miguel A|||0000-0002-8762-0426
  • Zaragozá, Ramón J.
[EN] The synthesis of hydroxamic acids from sterically hindered substrates, such as abietane-type resin acids, remains a synthetic challenge due to the congestion of the tricyclic skeleton. This study reports an efficient one-pot protocol for the direct conversion of abietic and dehydroabietic acids into their corresponding hydroxamic derivatives, achieving 65% and 74% isolated yields, respectively. Systematic screening of activating agents identified diethyl chlorophosphate (DCP) as the reagent for the hydroxyamidation. A critical finding of this work is that the optimization of the isolation process specifically minimizing the water amount during aqueous work-up was key to recovering these polar products and preventing important yield loss. The reaction proceeds through diethyl phosphate mixed anhydride intermediate, which was successfully isolated, providing direct experimental evidence of the activation pathway. The reaction mechanism was further elucidated using Density Functional Theory (DFT) calculations at the M062X/6-31G** level, identifying a concerted transition state for the simultaneous addition of hydroxylamine and expulsion of the phosphate group. Furthermore, the study rationalizes the observed chemoselectivity; although the ester is the more stable thermodynamic product, the formation of the N-hydroxy amide is kinetically favored through a substantially lower activation barrier. This combined experimental and theoretical approach establishes a practical and scalable methodology for the functionalization of abundant similar natural terpenoids., The authors thank the Spanish Government (Projects PID2023-146114NB-C21 and CEX2021-001230-S funded by MCIN/AEI/10.13039/501100011033/FEDER, UE) for financial support. This research was also supported by the regional government "Generalitat Valenciana, Conselleria de Educacion, Universidades y Empleo", grant number CIAICO/2022/220 to M.A.G.-C. W.E.M.-H. also thanks the regional government "Generalitat Valenciana" for a PhD contract (grant number CIACIF/2024/510).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New Layered Chalcogenide-Type Metal Sulfide Materials with Improved Properties for Solar Fuel Production Applications

  • Silva-Gaspar, Beatriz
  • Martinez-Franco, Raquel
  • Fécant, Antoine
  • Gonell-Gómez, Francisco|||0000-0002-8658-2878
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Novel lamellar chalcogenide materials, named as ITQ-75, are synthesized, focusing on the advancement and alteration of metal (tin and zinc) sulfidebased microstructured materials. These are achieved via hydro(solvo)thermal processes in the presence of N-heterocyclic aromatic structural directing agents. The comprehensive characterization of these materials included fine-tuning their electronic structure through a metal doping strategy and enhancing their accessibility by modifying the synthesis gel composition. This modification involved altering the gel¿s viscosity or incorporating mesoporogen agents such as saccharide moieties. The most promisingly modified ITQ-75-type materials demonstrated optical band gap values of ¿2.0 eV, falling within the optimal range for efficient solar fuel production processes. Furthermore, the photocatalytic performance of these optimized lamellar chalcogenides is assessed using the water-splitting reaction for hydrogen generation in the gas phase and without any sacrificial reagent. These new noble metal-free materials are revealed to be among the most efficient to date (up to 7 ¿molH2 h cm¿2). The results confirm the potential of these materials as promising photocatalysts for solar fuel production applications., The authors are grateful for financial support from Spanish Ministry (projects PID2020-112590GB-C21, PID2023-146114NB-C21, and CEX2021-001230-S, funded by MCIN/AEI/10.13039/501100011033). This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union NextGeneration (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/003). B.S-G. has been partially supported by IFP Energies Nouvelles.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

CO2 conversion to cyclic carbamates through alternative coupling routes catalyzed by hypercrosslinked polymer-supported NHC-Cu complexes

  • Fuerte-Diez, Beatriz
  • Iglesias, Marta
  • Maya, Eva M.
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] The catalytic conversion of CO2 into value-added chemicals is an important strategy for CO2 utilization. Herein, hypercrosslinked polymer-supported N-heterocyclic carbene-copper complexes (HCP-NHC-Cu) are synthesized in a single step from imidazolium-based hypercrosslinked polymers and evaluated as heterogeneous catalysts for the conversion of CO2 to cyclic carbamates. Owing to their robustness and insolubility, these materials operate as efficient heterogeneous catalysts in complementary coupling pathways, in three-component coupling reactions involving CO2, propargylic alcohols, and primary amines, as well as the coupling reaction of CO2 with propargylic amines, affording cyclic carbamates in quantitative yields and high selectivity. Cyclic carbamates are obtained in quantitative yields and high selectivity under moderate conditions (CO2 pressure of 5 bar, temperatures of 60-120 degrees C, and reaction times of 4-16 h). The excellent performance of the novel catalysts is attributed to a cooperative effect arising from CO2-philic NHC ligands working in concert with catalytically active Cu(I) sites., This research was supported by the project CATCO2NVERS funded by the European Union Horizon 2020 research and innovation program under grant agreement No 101000580 and MICIU/AEI/10.13039/501100011033 FEDER, UE through PID2023-146114NB-C22, PID2023-146114NB-C21. Authors acknowledge the Severo Ochoa Centres of Excellence program through Grant CEX2024-001445-S.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of functionalization on axially substituted 2,7-pyrene covalent triazine frameworks for dual sensing applications

  • Borrallo-Aniceto, M. Carmen
  • Fuerte-Diez, Beatriz
  • Valverde-Gonzalez, Antonio
  • Gonzalez-Aguilera, Laura
  • Ferrer, M. Luisa
  • Lillo, M. Pilar
  • Maya, Eva M.
  • Iglesias, Marta
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] To advance the critical goal of selective pollutant detection for environmental remediation, we have developed two classes of covalent triazine frameworks (CTFs). The first incorporates a 2,7-pyrene moiety, resulting in a donor-acceptor CTF, while the second type has a donor-(it-spacer)-acceptor configuration through the integration of pyrene-aryl or pyrene-fluoroaryl-1,3,5-triazine units (2,7-arylPyr-CTFs). Additionally, a partially fluorinated CTF (CTFmix) was synthesized by co-polymerizing fluorinated and non-fluorinated dinitrile monomers. All CTFs were obtained via acid-catalyzed cyclotrimerization and thoroughly characterized using different spectroscopic and analytical techniques. Giving the high chemical stability, enhanced light-harvesting ability, and efficient charge separation and transfer properties of pyrene-based-CTFs, we have investigated the influence of functional groups, particularly fluorine, on their environmental analyte sensing. Our results show that these Pyrene-CTFs are effective fluorescent probes for the selective detection of picric acid (PA) and the pesticide dicloran (DCNA). Among then, the mixed fluorinated CTF, exhibited the highest sensitivity, achieving detection limits in the ppm range. Furthermore, this material showed high selectivity towards metal ions such as Au3+ or Fe3+, with fluorescence recovery observed up to six cycles upon the addition of ascorbic acid., The authors acknowledge funding from the Spanish government through grants PID2023-146114NB-C22, PID2023-146114NB-C21, PID2021-123287OB-I00 and PID2021-123648OB-100 (all funded by MICIU/AEI/10.13039/501100011033, and from EU FEDER) , and the Severo Ochoa Centres of Excellence program (Grant CEX2024-001445-S) . M.P.L. acknowledges A. Guirao for TCSPC instrumental support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi-component catalysts with integrated MWW-type layers and mixed oxide domains for glucose-to-formic acid oxidation

  • Esteban-Barrera, Cristina|||0009-0007-7940-9018
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] The development of efficient and multi-component catalysts with distinct active sites is essential to promote chemically and economically circular processes and to achieve sustainable development. In this work, various multi-component materials were synthesized combining the properties of MWW zeolitic layers and MgAl mixed oxides. Synthesis conditions were successfully developed and optimized to achieve the in situ formation of nanometric sub-domains of layered double hydroxides (LDHs) on the surfaces and within the microporous cavities and channels of MWW layers (methods I and II). Additionally, multi-component materials were prepared by mixing MWW lamellar precursors and preformed layered double hydroxides, using swelling and exfoliation techniques and combined with sonification and ball-milling techniques (method III). Calcination yielded materials effectively integrating zeolitic MWW layers with MgAl oxides, displaying distinct structural features depending on the synthesis method. The catalytic performance of these materials was evaluated in the oxidation of glucose to formic acid (FA) using H2O2 as the oxidant. Among the catalysts investigated, MWW@MgAl-in situ-40, which combined suitable textural properties and basicity, showed superior activity, achieving a 47.7% FA yield at 66.2% glucose conversion after 7.5 h at 363 K in dioxane., The authors are grateful for the financial support from the Spanish Ministry (projects PID2023-146114NB-C21 and CEX2021-001230-S, funded by MCIN/AEI/10.13039/501100011033). This study forms part of the Advanced Materials program and was supported by MCIN with funding from the European Union NextGeneration (PRTRC17.I1) and by Generalitat Valenciana (MFA/2022/003). C. E. has been partially supported by the Spanish Government through the FPI pre-doctoral scholarship number PRE2019-089547 under project SEV-2016-0683-19-3. The authors acknowledge the Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design and characterization of multi-component lamellar materials based on MWW-type zeolitic layers and metal oxide sub-domains

  • Esteban-Barrera, Cristina|||0009-0007-7940-9018
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] The preparation of multi-component catalysts with tailored properties and high activity is essential for advancing sustainable catalytic processes and contributes to a healthy planet. In this study, we synthesised several families of multi-component materials by combining MWW-type zeolitic layers with MgAlCe oxide sub-domains at the nanometric scale, employing different approaches. Methods I and II involve the co-precipitation of MgAlCe LDH using various sources of Mg2+, Ce4+ and Al3+ in the presence of MWW zeolites. Method III utilizes swelling and intercalation of MWW with pre-formed LDH phases. After calcination, multi-component materials with integrated zeolitic layers and MgAlCe oxides were obtained, revealing significant structural differences across the methods. Method II allowed the co-precipitation of MgAlCe LDH sub-domains and promoted strong interactions between these LDH sub-domains and the MWW zeolite structure, disrupting regular LDH stacking. This interaction affects the structural organisation and results in inconsistently and irregularly stacked LDH layers, as shown by XRD patterns. Moreover, the presence of strong interactions with the zeolitic framework led to modify the chemical environment of the MWW structure. The characterization study revealed that these materials possess accessible acidic, basic, and redox sites, underscoring their potential as multi-functional catalysts. The homogeneous distribution of active sites within the porous zeolitic network would facilitate cooperative interactions between active centres of the zeolite structure and metallic oxides, while the small particle size and high dispersion of MgAlCe oxides should improve both the accessibility to these active sites and their number. Collectively, these structural and chemical properties make these multi-functional and component materials promising candidates for heterogeneous catalytic applications contributing to sustainable development and supporting efforts for a healthier planet., The authors are grateful for the financial support from the Spanish Ministry (projects PID2020-112590GB-C21, PID2023-146114NB-C21 and CEX2021-001230-S, funded by MCIN/AEI/10.13039/501100011033). This study forms part of the Advanced Materials program and was supported by MCIN with funding from the European Union NextGeneration (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/003). C. E. has been partially supported by the Spanish Government through the FPI pre-doctoral scholarship number PRE2019-089547 under project SEV-2016-0683-19-3.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hard Carbon-Zeolite composites from textile cotton waste: a sustainable route to porous functional materials

  • Rapeyko, Anastasia|||0000-0002-8309-3702
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
  • Renz, Michael|||0000-0002-1101-9562
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] NaX-hard carbon (HC) hybrid materials were synthesized by direct incorporation of biowaste-derived HC, obtained from cotton textile waste, into the zeolitic sol-gel precursor during hydrothermal crystallization. The synthesis conditions were optimized to suppress the formation of competing NaP phases, enabling the crystallization of phase-pure FAU-type NaX even at HC loadings as high as 49 wt%. XRD, 29Si and 27Al MAS NMR, and XPS analyses confirmed that the zeolite framework remains structurally preserved after HC incorporation. Textural characterization by N2, CO2 and Ar adsorption revealed the coexistence of zeolitic micropores and carbon-derived ultramicropores, giving rise to hybrid materials with complementary microporosity and tunable structural and textural properties. Despite the high carbon content, the composites retained high surface areas and micropore volumes, suggesting that the hard carbon phase contributes complementary accessible porosity in addition to the intrinsic zeolitic microporosity. Overall, this work demonstrates a simple and sustainable strategy for transforming textile waste into functional zeolite-carbon hybrid materials, providing a promising platform for future studies on adsorption and related porous-material applications., This work was funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by "ERDF A way of making Europe", by the "European Union" or by the "European Union NextGenerationEU/PRTR", with the grant reference TED2021-131715B-I00 and the acronym Fabrics2SIB. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S and PID2023-146114NB-C21 grants funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. U.D. thanks the Generalitat Valenciana for its grant to support the project with reference CIAICO/2024/083.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ti-functionalised MWW silica zeolites in the role of catalysts for diphenyl sulphide oxidation with H2O2

  • Dubiel, Wiktoria
  • Furgal, Anna
  • Kowalczyk, Andrzej
  • Rutkowska, Malgorzata
  • Chmielarz, Lucjan
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] In the presented studies, the titanium-grafted MWW silica zeolites were tested as catalysts in the oxidation of diphenyl sulphide (Ph2S) using hydrogen peroxide (H2O2) as the oxidant. To overcome the problem of diffusion limitations for bulky reactant molecules into the catalyst's channel system and improve accessibility to active sites, titanium was grafted onto the silica MWW zeolite support in its three-dimensional form (ITQ-1) and its delaminated form (ITQ-2). The obtained materials were characterised with respect to their chemical composition (ICP-OES), structure (FTIR, XRD), textural properties (low-temperature N2 sorption), and titanium form (UV-vis DRS). Post-synthetic modification with a metal precursor resulted in titanium deposition mainly on the outer surface of the materials in the form of monomeric Ti(IV) species. Owing to the active phase form and material properties, all the studied samples performed high catalytic activity in the Ph2S oxidation by H2O2., The research has been supported by a grant from the Priority Research Area - Research Support Module under the Strategic Programme Excellence Initiative at Jagiellonian University. The study was carried out using research infrastructure funded by the European Union in the framework of the Smart Growth Operational Programme, Measure 4.2; Grant No. POIR.04.02.00-00-D001/20, "ATOMIN 2.0-Center for materials research on ATOMic scale for the INnovative economy". U.D. acknowledges to the Spanish Government and Generalitat Valenciana for funding [PID2023-146114NB-C21 and MFA/2022/003] .
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New Layered Chalcogenide-Type Metal Sulfide Materials with Improved Properties for Solar Fuel Production Applications

  • Silva-Gaspar, Beatriz
  • Gonell, Francisco
  • Martínez-Franco, Raquel
  • Fécant, Antoine
  • Díaz Morales, Urbano
  • Corma, Avelino
Novel lamellar chalcogenide materials, named as ITQ-75, are synthesized, focusing on the advancement and alteration of metal (tin and zinc) sulfide-based microstructured materials. These are achieved via hydro(solvo)thermal processes in the presence of N-heterocyclic aromatic structural directing agents. The comprehensive characterization of these materials included fine-tuning their electronic structure through a metal doping strategy and enhancing their accessibility by modifying the synthesis gel composition. This modification involved altering the gel's viscosity or incorporating mesoporogen agents such as saccharide moieties. The most promisingly modified ITQ-75-type materials demonstrated optical band gap values of ≈2.0 eV, falling within the optimal range for efficient solar fuel production processes. Furthermore, the photocatalytic performance of these optimized lamellar chalcogenides is assessed using the water-splitting reaction for hydrogen generation in the gas phase and without any sacrificial reagent. These new noble metal-free materials are revealed to be among the most efficient to date (up to 7 µmol h cm). The results confirm the potential of these materials as promising photocatalysts for solar fuel production applications., The authors are grateful for financial support from Spanish Ministry (projects PID2020-112590GB-C21, PID2023-146114NB-C21, and CEX2021-001230-S, funded by MCIN/AEI/10.13039/501100011033). This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union NextGeneration (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/003). B.S-G. has been partially supported by IFP Energies Nouvelles.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design and characterization of multi-component lamellar materials based on MWW-type zeolitic layers and metal oxide sub-domains

  • Esteban, C.
  • Velty, Alexandra Isabelle Lucienne
  • Díaz Morales, Urbano
The preparation of multi-component catalysts with tailored properties and high activity is essential for advancing sustainable catalytic processes and contributes to a healthy planet. In this study, we synthesised several families of multi-component materials by combining MWW-type zeolitic layers with MgAlCe oxide sub-domains at the nanometric scale, employing different approaches. Methods I and II involve the co-precipitation of MgAlCe LDH using various sources of Mg, Ce and Al in the presence of MWW zeolites. Method III utilizes swelling and intercalation of MWW with pre-formed LDH phases. After calcination, multi-component materials with integrated zeolitic layers and MgAlCe oxides were obtained, revealing significant structural differences across the methods. Method II allowed the co-precipitation of MgAlCe LDH sub-domains and promoted strong interactions between these LDH sub-domains and the MWW zeolite structure, disrupting regular LDH stacking. This interaction affects the structural organisation and results in inconsistently and irregularly stacked LDH layers, as shown by XRD patterns. Moreover, the presence of strong interactions with the zeolitic framework led to modify the chemical environment of the MWW structure. The characterization study revealed that these materials possess accessible acidic, basic, and redox sites, underscoring their potential as multi-functional catalysts. The homogeneous distribution of active sites within the porous zeolitic network would facilitate cooperative interactions between active centres of the zeolite structure and metallic oxides, while the small particle size and high dispersion of MgAlCe oxides should improve both the accessibility to these active sites and their number. Collectively, these structural and chemical properties make these multi-functional and component materials promising candidates for heterogeneous catalytic applications contributing to sustainable development and supporting efforts for a healthier planet., The authors are grateful for the financial support from the Spanish Ministry (projects PID2020-112590GB-C21, PID2023-146114NB-C21 and CEX2021-001230-S, funded by MCIN/AEI/10.13039/501100011033). This study forms part of the Advanced Materials program and was supported by MCIN with funding from the European Union NextGeneration (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/003). C. E. has been partially supported by the Spanish Government through the FPI pre-doctoral scholarship number PRE2019-089547 under project SEV-2016-0683-19-3.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of functionalization on axially substituted 2,7-pyrene covalent triazine frameworks for dual sensing applications

  • Borrallo-Aniceto, M. Carmen
  • Fuerte-Díez, Beatriz
  • Valverde-González, Antonio
  • González-Aguilera, Laura
  • Ferrer, M. Luisa
  • Lillo, M. Pilar
  • Díaz Morales, Urbano
  • Maya, Eva M.
  • Iglesias, Marta
13 pages, 11 figures, To advance the critical goal of selective pollutant detection for environmental remediation, we have developed two classes of covalent triazine frameworks (CTFs). The first incorporates a 2,7-pyrene moiety, resulting in a donor-acceptor CTF, while the second type has a donor-(π-spacer)-acceptor configuration through the integration of pyrene-aryl or pyrene-fluoroaryl-1,3,5-triazine units (2,7-arylPyr-CTFs). Additionally, a partially fluorinated CTF (CTFmix) was synthesized by co-polymerizing fluorinated and non-fluorinated dinitrile monomers. All CTFs were obtained via acid-catalyzed cyclotrimerization and thoroughly characterized using different spectroscopic and analytical techniques. Giving the high chemical stability, enhanced light-harvesting ability, and efficient charge separation and transfer properties of pyrene-based-CTFs, we have investigated the influence of functional groups, particularly fluorine, on their environmental analyte sensing. Our results show that these Pyrene-CTFs are effective fluorescent probes for the selective detection of picric acid (PA) and the pesticide dicloran (DCNA). Among then, the mixed fluorinated CTF, exhibited the highest sensitivity, achieving detection limits in the ppm range. Furthermore, this material showed high selectivity towards metal ions such as Au<sup>3+</sup> or Fe<sup>3+</sup>, with fluorescence recovery observed up to six cycles upon the addition of ascorbic acid., The authors acknowledge funding from the Spanish government through grants PID2023-146114NB-C22, PID2023-146114NB-C21, PID2021-123287OB-I00 and PID2021-123648OB-100 (all funded by MICIU/AEI /10.13039/501100011033, and from EU FEDER), and the Severo Ochoa Centres of Excellence program (Grant CEX2024-001445- S). M.P.L. acknowledges A. Guirao for TCSPC instrumental support., Peer reviewed