Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of Li1.3Al0.3Ti1.7(PO4)3 content and particle size on the electrochemical properties and stability of polymer-based solid electrolytes for lithium batteries

  • Simon, Sonia
  • Ferrer-Nicomedes, Sergio
  • Garcia-Belmonte, Germa
  • Barba-Juan, Antonio
  • Vicente-Agut, Nuria
  • Mormeneo-Segarra, Andrés|||0000-0002-8827-3649
[EN] This work addresses the current limitations of standard composite solid electrolyte membranes through a systematic optimization of the LATP Li1.3Al0.3Ti1.7(PO4)3 wt fraction and rigorous particle size control via selective milling. By precisely integrating these calibrated ceramic particles within a ternary PVDF-HFP/PEO matrix, the resulting configuration establishes a highly balanced framework for advanced lithium-ion battery applications. The optimal composition, designated CSE2H (26 wt% LATP with particle size d50 approximate to 0.875 mu m), exhibits exceptional electrical properties: minimum activation energy (0.138 eV), maximum ionic conductivity (1.12 & sdot;10- 4 S cm- 1 at 30 degrees C and 6.33 & sdot;10- 4 S cm- 1 at 70 degrees C), and stable electrochemical operation within the voltage range 2.5-4.2 V vs. Li+/Li, LFP-cell operating conditions. Electrochemical impedance spectroscopy reveals low interfacial resistance, while chronoamperometry measurements yield a lithium-ion transference number of 0.48, indicating efficient ion transport. Galvanostatic cycling experiments confirm high coulombic efficiency (98%) and good capacity retention: initial capacity of 147 mAh g- 1 LFP at 0.5C stabilizing at 77.58 mAh g- 1 LFP after 200 cycles, with specific discharge capacity of 127.2 mAh g- 1 LFP at 2C. Concurrently, these integrated results establish that this 26 wt% LATP baseline configuration successfully balances interfacial compatibility with competitive electrochemical properties, presenting a highly viable pathway for targeted solidstate battery development., A. B.-J. and G. G.-B. have received funding from Generalitat Valenciana under the Pla Complementari "Programa de Materials Avancats", 2022 (grant number MFA/2022/030) and CIPROM/2024/91. A. B.-J. and N. V.-A. acknowledge the financial support received from projects PID2020-112659RB-I00 and PID2024-158590OB-I00, funded by MICIU/AEI/10.13039/501100011033. N. V.-A. acknowledges support from Universitat Jaume I under project UJI/2023/016. S. F.-N. thank Generalitat Valenciana for the FPI Fellowship Program (grant numbers CIACIF/2021/050). A. M.-S. acknowledge the financial support received from projects PAID-06-25 and PAID-10-24, funded by Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Logistic modelling of iron oxidation in alkaline media

  • Domenech-Carbo, Antonio
  • Martínez-Ibernón, Ana|||0000-0003-2136-5650
[EN] A logistic model is applied to describe the voltammetry of iron electrodes in contact with NaOH aqueous electrolytes. This model provides a satisfactory reproduction of voltammetric features associated with superimposed oxidative processes incorporating miscibility gaps and a bi-logistic formalism. The model is consistent with a mechanistic view where hydroxide ion permeation is superimposed with an adsorption-dissolution-precipitation pathway and can be extended to reproduce chronoamperometric data., The authors gratefully acknowledge the financial support provided by the Universitat Politecnica de Valencia (UPV) through the program "Ayuda a Primeros Proyectos de Investigacion (PAID-06-25)".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Matheuristic Approach for the Bi-Objective and Multi-Source Team Orienteering Problem with Prioritized Nodes

  • Oltra Crespo, Sandra|||0000-0003-1995-2557
  • Agud Albesa, Lucia|||0000-0002-1222-7988
  • Garrido-Saez, Neus|||0000-0002-7903-8591
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] This work proposes a matheuristic approach that combines heuristic techniques with mathematical optimization to address a bi-objective, multi-source team orienteering problem. During the exploration phase, nodes are assigned to depots using a biased-randomized round-robin heuristic, guided by a ranking criterion based on marginal distances. This step aims to generate diverse mappings and identify those that lead to promising solutions under a convex combination of the two objectives: total reward and number of priority nodes visited. In the exploitation phase, an intensive search is applied to a subset of elite mappings, further improving the quality of the solutions. The method produces a Pareto frontier, offering a range of trade-offs between the two objectives. Computational experiments on adapted benchmark instances confirm the method¿s ability to generate high-quality or near-optimal solutions, often outperforming exact methods under realistic time constraints., This work has been partially supported by the Spanish Ministry of Science, Innovation and Universities MICIU/AEI/10.13039/501100011033 (PID2025-169830NB-I00, AIA2025-163553-C44, PID2022-138860NB-I00), the Generalitat Valenciana (2024 CIAICO 117) and the Universitat Politècnica de València (PAID-06-25).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sustainable Knoevenagel condensation of lignin-derived aldehydes over basic mesoporous silica

  • Brito, Julio Cesar Fernandes P.
  • Ancora, Gioele
  • Gianotti, Enrica
  • Díaz, Urbano|||0000-0003-1472-8724
  • Velty, Alexandra|||0000-0002-8263-4570
[EN] The sustainable valorization of biomass-derived molecules requires efficient, robust, and recyclable catalytic systems. In this study, amine-functionalised mesoporous silica nanoparticles (APTES@MSNs) were developed and investigated as heterogeneous base catalysts for the Knoevenagel condensation of lignin-derived aromatic aldehydes. Mesoporous silica nanoparticles were selected as supports due to their high surface area, ordered mesoporous structure, and tunable surface chemistry, enabling the stable grafting of organic functionalities. Postsynthetic functionalisation with (3-aminopropyl)triethoxysilane introduced accessible primary amine groups that act as basic catalytic sites, yielding a hybrid organic-inorganic material with high structural stability. The catalytic performance of APTES@MSNs was evaluated using vanillin, syringaldehyde, and 4-hydroxybenzaldehyde as representative bio-based substrates. Key reaction parameters, including solvent, temperature, and catalyst loading, were systematically examined to identify mild and environmentally benign operating conditions. The potential of amine-functionalised mesoporous silicas as sustainable heterogeneous catalysts is highlighted for the upgrading lignin-derived platform molecules within a circular chemistry framework., Dr. Gioele Ancora holds a PhD career grant supported by Next Generation EU - MUR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave-Driven Densification of NASICON-type LATP: A Fast Route Toward Efficient Solid-State Electrolytes

  • Mormeneo-Segarra, Andrés|||0000-0002-8827-3649
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Ferrer-Nicomedes, Sergio
  • Vicente-Agut, Nuria
[EN] The transition from flammable liquid electrolytes to safer solid-state electrolytes is essential for next-generation batteries. Li1.3Al0.3Ti1.7(PO4)3 (LATP) is a promising NASICON-type electrolyte, but its application is hindered by energy-intensive high-temperature sintering. This work demonstrates microwave sintering as a rapid and efficient route to fabricate dense, highly conductive LATP. Green bodies with a relative density of 71% were obtained by combined uniaxial and isostatic pressing, followed by microwave sintering between 800 and 1100 ºC for only 10 minutes. Optimal densification (91.4%) was achieved at 1000 ºC, while higher temperatures led to abnormal grain growth and rutile-TiO2 formation. Electrochemical impedance spectroscopy revealed a strong reduction in grain-boundary resistance above 950 ºC. LATP sintered at 1000 ºC exhibited an ionic conductivity of 5·10-4 S cm-1 and an activation energy of 0.20 eV. Symmetric Li|LATP|Li cells showed stable cycling over 500 h with low overpotentials, confirming excellent transport and mechanical integrity., This publication is part of the grants PID2021-128548OB-C21 & C22 and CNS2023-144190 funded by MICIU/AEI/10.13039/501100011033, "ERDF/EU" and the "European Union NextGenerationEU/PRTR". A.M.-S. acknowledges the funding from the Aid for Early Research Projects (PAID-06-25) and the postdoctoral fellowship (PAID-10-24) programs from the Vice-Rectorate for Research of Universitat Politecnica de Valencia. S.F.-N thanks Generalitat Valenciana through FPI Fellowship Program (CIACIF/2021/050) . N. V.-A. acknowledges support for the research from Universitat Jaume I under the project number UJI/2023/016. Authors thank Felipe L. Penaranda-Foix from ITACA facilities for performing the dielectric measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Mejora del proceso de coloración para la obtención de textiles biocidas

  • Martínez-González, Inés|||0000-0002-7681-2879
[ES] La presente tesis doctoral se centra en el desarrollo, optimización y evaluación de procesos de coloración textil para obtener tejidos fotoactivos con funcionalidad biocida. El trabajo parte de la hipótesis de que determinados fotosensibilizadores, además de aportar color, pueden incorporarse a sustratos textiles mediante procesos convencionales de tintura y acabado, generando materiales capaces de producir especies reactivas de oxígeno bajo luz visible y reducir la carga microbiana. Se estudiaron tres compuestos fotoactivos de distinta naturaleza iónica: Azul de Metileno (MB), Rosa de Bengala (RB) y Riboflavina (RF), aplicados sobre tejidos de algodón y poliamida por su interés en aplicaciones textiles y sanitarias. En los tejidos tratados se evaluaron la solidez del color, el comportamiento fotofísico, la morfología superficial y la actividad antimicrobiana frente a distintos modelos microbiológicos. Inicialmente se caracterizó el comportamiento de los fotosensibilizadores en condiciones de tintura. La RB mostró halocromía, mientras que el MB presentó cambios espectrales y cromáticos en condiciones de pH muy alcalino y temperatura elevada, asociados a su inestabilidad química. Estos resultados permitieron establecer protocolos de medida adecuados para evitar errores en la determinación espectrofotométrica de la concentración. La aplicación de RB sobre poliamida permitió obtener materiales fotoactivos mediante un proceso de tintura convencional, compatible con tecnologías industriales. La incorporación de un fijador catiónico comercial mejoró la solidez y modificó la interacción entre tejido, fotosensibilizador y microorganismos. Los tejidos desarrollados mostraron elevada eficacia antimicrobiana bajo luz visible frente a bacterias Gram-positivas y Gram-negativas, hongos y virus, demostrando el potencial de la tintura convencional como vía sencilla y escalable para producir textiles fotodinámicos. En algodón, la incorporación de MB resultó más compleja por su baja afinidad por la celulosa y su limitada solidez al lavado. Por ello, se evaluaron distintas condiciones de tintura y pretratamientos superficiales, incluidos quitosano, ácido tánico y polietilenimina. El quitosano favoreció la actividad antibacteriana fotoactivada, especialmente a bajas concentraciones de MB y pH 6, mientras que el ácido tánico proporcionó mejores resultados de agotamiento y solidez. Esta comparación evidenció que maximizar la solidez del color no siempre coincide con maximizar la eficacia fotodinámica. Además, el estudio de fijadores comerciales mostró que el aniónico fue el más eficaz para mejorar la solidez, aunque sin una mejora sustancial respecto al catiónico. La estrategia más prometedora fue la obtención de un tejido multifuncional de algodón mediante la incorporación secuencial de MB y RB en una estructura multicapa. Este método permitió combinar fotosensibilizadores de distinta naturaleza, ampliar la absorción de luz visible y mejorar la actividad biocida. El tejido mostró elevada eficacia frente a bacterias, hongos y virus, mantuvo una notable actividad antibacteriana tras lavados repetidos y fue validado en un entorno hospitalario real, donde evidenció reducción microbiana. Finalmente, se evaluó la incorporación de RF como compuesto fotoactivo de origen natural. Aunque su actividad antibacteriana individual fue limitada en las condiciones estudiadas, permitió modular la tonalidad final de los tejidos basados en MB y RB, aportando una funcionalidad óptica complementaria. En conjunto, esta tesis demuestra que la adaptación de procesos textiles convencionales mediante fotosensibilizadores permite obtener tejidos coloreados con funcionalidad biocida fotoactivada. Los resultados contribuyen al desarrollo de textiles funcionales para aplicaciones sanitarias, especialmente orientados a la prevención de contagios.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Classification of Goat Vocalization via Lightweight Machine Learning and High-Dimensional Acoustic Features

  • Méndez-Reyes, Daniel Alexander|||0000-0001-6414-305X
  • Calvet, S.|||0000-0001-6639-9892
[EN] Simple Summary Nowadays, monitoring the well-being of farm animals continuously and without disturbing them is a major goal. For goats, vocalizations carry important information about their emotions, such as distress from an injury or heat, and more social-related information such as a mother recognizing her kid. While computers can learn to identify these sounds, current methods often require high computer capacity and are difficult to operate directly in barns or fields due to economical and energy constraints. This study developed a lightweight algorithm designed specifically to run on small, low-power devices directly on farms. By analyzing specific acoustic patterns in the sound waves rather than converting them into complex data, the algorithm successfully learned to recognize eight different goat behavioral contexts and states with high accuracy. The system was especially reliable at detecting extreme distress and mother-kid reunions. This development provides farmers with a practical, and real application tool to automatically monitor goat welfare in real-time, helping to identify animal conditions. Continuous monitoring of livestock vocalizations offers a non-invasive tool for welfare assessment, but deploying current deep learning models in resource-constrained farm environments remains challenging due to high computational demands. This study proposes a feature-based machine learning pipeline optimized for edge computing to classify caprine vocalizations. Using the VOCAPRA dataset, which comprises 4147 labeled caprine vocalizations categorized into eight distinct welfare states and contexts, a hybrid feature extraction framework was applied to derive 156 spectral, temporal, and bioacoustic descriptors. Dimensionality reduction and a comprehensive comparative screening of 18 algorithms identified the CatBoost Classifier and a Multilayer Perceptron (MLP) as the optimal models. The CatBoost ensemble achieved a robust accuracy of 85.2%, while the optimized MLP reached 87.2% overall accuracy. An edge deployment benchmark revealed that the MLP was the best candidate with for real-time application, featuring a memory footprint of just 0.639 MB and near-instantaneous inference speeds of under 0.005 milliseconds per sample. Furthermore, feature importance and SHAP analyses revealed that mel-frequency cepstral coefficients heavily drove model decisions, particularly for identifying extreme physical distress and maternal reunion. The proposed methodology achieves competitive classification performance while dramatically reducing pre-processing and computational loads compared to image-based deep learning approaches, demonstrating the viability of lightweight-model, energy-efficient, real-time bioacoustic monitoring for precision livestock farming., This research was funded by the "Ayuda a Primeros Proyectos de Investigacion" program [grant number PAID-06-25], Vice-rectorate for Research of Universitat Politecnica de Valencia (UPV). Daniel Alexander Mendez Reyes was supported by the grant JDC2023-050534-I funded by MICIU/AEI/10.13039/501100011033 and by FSE+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi-Criteria Decision Analysis for Assessing Green Hydrogen Suitability in MENA FFED Countries

  • Benreguieg, Abdelhafidh
  • Siano, Pierluigi
  • Montuori, Lina|||0000-0001-7574-7916
  • Alcázar-Ortega, Manuel|||0000-0001-5384-3931
[EN] For nations heavily dependent on fossil-fuel exports, hydrogen is emerging as a promising solution to reduce carbon emissions while preserving economic stability and promoting countries¿ energy independence. This research study examines hydrogen potential as a renewable energy source to facilitate the transition toward a sustainable economy with a special focus on Middle East and North Africa (MENA) countries. The analysis delves into policy frameworks, technological advancements, and infrastructure adaptations to build a reliable green hydrogen supply chain for a scalable and bankable future. The role played by other renewable energies like solar and wind, together with the risk related to the high demand for water resources to achieve the green hydrogen transition, has also been as-sessed. Furthermore, key challenges have been highlighted, including the repurposing of the existing pipelines into the energy networks, public¿private partnerships to secure in-vestment, and legislation requirements to encourage the adoption of novel hydrogen ap-plications. In order to do that, a SWOT-PESTEL analysis has been carried out to identify the main decarbonization strategies for achieving a replicable framework. Moreover, a multi-criteria decision analysis was performed, applying 11 indicators across supply-side (e.g., solar/wind potential, LCOE, and water stress), demand-pull/logistics (e.g., maritime connectivity, steel production, and LNG export capacity), and risk/regulation dimensions (e.g., governance effectiveness, regulatory quality, and fossil rent dependence). The Ana-lytic Hierarchy Process (AHP) was used for weighting, the entropy method for weighting variability (hybrid 50/50 combined weights), min¿max normalization for costs, 5% Win-sorization for outliers, and TOPSIS for aggregation following OECD-JRC composite indi-cator guidelines. Results have been validated through a multiple scenario analysis (base, supply-led, and risk-aware) and sensitivity testing via Dirichlet bootstrapping (5000 iter-ations) with ±20% weight perturbations. Six countries of the MENA region have been studied. The multi-criteria decision analysis outcomes rank Egypt (composite score 0.518), Algeria (0.482), and Oman (0.479) as the most suitable countries for large-scale green hy-drogen and ammonia production/export, while Saudi Arabia, Qatar, and Kuwait achieved lower supply scores in the base case due to higher perceived risks., The research has been developed in the framework of the project PAID-06-25, financed by the Vice-Rectorate for Research of the Universitat Politècnica de València.