Pasar al contenido principal

PIEZOCERAMICAS SIN PLOMO SINTERIZADAS A BAJA TEMPERATURA: PROCESAMIENTO ENERGETICAMENTE EFECTIVO Y AMBIENTALMENTE SOSTENIBLE MEDIANTE SINTERIZACION POR SPS

PID2021-128548OB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spark plasma sintering of beta-Eucryptite/alumina nanocomposites with low thermal expansion and improved mechanical properties obtained by colloidal route

  • López-Santos, N.
  • Díaz, L.A.
  • Fernández, A.
  • Suárez, M.
  • Benavente Martínez, Rut|||0000-0002-4566-9475
[EN] In this study, (3-Eucryptite/alumina nanocomposites were synthesized using colloidal methods and sintered by Spark Plasma Sintering (SPS). Nanocomposites with three different alumina contents (2.5, 5 and 10 wt%) were prepared, with pure (3-Eucryptite serving as a reference material. The microstructural characteristics of the nanocomposites were analyzed, and their mechanical properties (Young's modulus, hardness, flexural strength, fracture toughness) were evaluated. The incorporation of alumina nanoparticles effectively controlled the grain growth of (3-Eucryptite during the sintering process, resulting in a fine-grained structure. Compared to monolithic (3-Eucryptite, the nanocomposites exhibited significant enhancements in mechanical performance: hardness increased by at least 25 %, fracture toughness improved by 30 %, and mechanical strength rose by more than 40 %. Furthermore, the composites demonstrated a very low thermal expansion coefficient, making them promising candidates for a wide range of industrial applications., Authors acknowledges the financial support received through projects 3D-BoneWhey (PID2023-147490OB-I00) financed by MICIU/AEI/10.13039/501100011033, FreeSin (PID2021-128548OB-C21 & C22) , financed by MCIN/AEI/10.13039/501100011033, and MiLi (ID.101082451) financed by Horizon-CL4-2022-Space-01. The authors also thank Generalitat Valenciana for the funding CIAICO/2023/264.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of calcination rate on mechano-chemically activated powders for the synthesis of lead-free KNN-type ceramics

  • Bonilla-Molina, Ashley
  • Pruna, Alina Iuliana|||0000-0002-5250-066X
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Busquets Mataix, David Jeronimo|||0000-0001-5031-7805
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Fernández-González, Daniel
[EN] Given the raising environmental concerns over lead toxicity, replacing the common leadbased piezoelectric ceramics with a proper alternative became a hot topic. (Na0.5K0.5)NbO3 (KNN) is considered a potential replacement for such ceramics. This work presents the synthesis of KNN-type ceramics based on conventional solid-state reaction, where the effect of precursor particle size is studied. A combined mechanical activation by ball milling and calcination at low temperature of 800 ¿C is applied. The phase structure evolution, morphology and mechanical properties are investigated systematically with the particle size and the calcination rate. The results indicate a marked effect of the precursor particle size on the properties of obtained ceramics. Secondary phase content could be lowered and tetragonality improved by the applied approach. Despite the presence of secondary phases, dielectric measurements indicated typical values of dielectric constant and loss for piezoelectric materials., This publication is part of the grant PID2021-128548OBC21 & C22 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU , and the grant CNS2023-144190 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR . CIGRIS/2022/077 project funded by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave-Driven Densification of NASICON-type LATP: A Fast Route Toward Efficient Solid-State Electrolytes

  • Mormeneo-Segarra, Andrés|||0000-0002-8827-3649
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Ferrer-Nicomedes, Sergio
  • Vicente-Agut, Nuria
[EN] The transition from flammable liquid electrolytes to safer solid-state electrolytes is essential for next-generation batteries. Li1.3Al0.3Ti1.7(PO4)3 (LATP) is a promising NASICON-type electrolyte, but its application is hindered by energy-intensive high-temperature sintering. This work demonstrates microwave sintering as a rapid and efficient route to fabricate dense, highly conductive LATP. Green bodies with a relative density of 71% were obtained by combined uniaxial and isostatic pressing, followed by microwave sintering between 800 and 1100 ºC for only 10 minutes. Optimal densification (91.4%) was achieved at 1000 ºC, while higher temperatures led to abnormal grain growth and rutile-TiO2 formation. Electrochemical impedance spectroscopy revealed a strong reduction in grain-boundary resistance above 950 ºC. LATP sintered at 1000 ºC exhibited an ionic conductivity of 5·10-4 S cm-1 and an activation energy of 0.20 eV. Symmetric Li|LATP|Li cells showed stable cycling over 500 h with low overpotentials, confirming excellent transport and mechanical integrity., This publication is part of the grants PID2021-128548OB-C21 & C22 and CNS2023-144190 funded by MICIU/AEI/10.13039/501100011033, "ERDF/EU" and the "European Union NextGenerationEU/PRTR". A.M.-S. acknowledges the funding from the Aid for Early Research Projects (PAID-06-25) and the postdoctoral fellowship (PAID-10-24) programs from the Vice-Rectorate for Research of Universitat Politecnica de Valencia. S.F.-N thanks Generalitat Valenciana through FPI Fellowship Program (CIACIF/2021/050) . N. V.-A. acknowledges support for the research from Universitat Jaume I under the project number UJI/2023/016. Authors thank Felipe L. Penaranda-Foix from ITACA facilities for performing the dielectric measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing cutting tool durability: exploration of Al2O3-SiCw-graphene composites fabricated by SPS for improved mechanical and scratch resistance

  • Suárez, Marta
  • Pérez-Mas, Ana M.
  • Menéndez, Rosa
  • Gutiérrez, Carlos F.
  • Fernández, Adolfo
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] This study focuses on the fabrication and characterisation of Al2O3-SiCw-rGO composites sintered by spark plasma sintering (SPS) technique. The research is mainly focused on understanding the impact of varying graphene content (0.5, 1.0 and 1.5 vol %) on nanomechanical properties and scratch resistance. Among the compositions investigated, the composite containing 0.5 vol% graphene showed superior mechanical properties. Specifically, it exhibited a hardness of similar to 30 GPa, a fracture toughness of 10.5 MPa m(1/2) and a flexural strength of similar to 920 MPa. In addition, this composite showed remarkable scratch resistance compared to composites with a higher or lower graphene content. In addition to mechanical properties, the fabricated composites also exhibited high electrical conductivity. This characteristic is especially advantageous for electrical discharge machining (EDM) processes. The high electrical conductivity enables efficient machining of complex shapes by EDM, thereby reducing machining costs while ensuring accuracy and efficiency., This publication is part of the grant PID2021-128548OB-C21&C22 funded by MCIN/AEI/10.13039/501100011033. CINN-CSIC acknowledges the project CPP2022-009892. Authors are grateful to Moscow State University of Technology "Stankin" for the evaluation of the material under real conditions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

(K0.5Na0.5)NbO3 (KNN) powder: Colloidal synthesis from different sodium and potassium precursors

  • Fernández-González, D.
  • Gómez-Rodríguez, C.
  • Menéndez, J. L.
  • Moya, J. S.
  • Suarez, M.
  • Fernandez, A.
  • Díaz, L. A.
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] Potassium sodium niobate ((K0.5Na0.5)NbO3, KNN) is a ceramic material with potential interest in the field of piezoelectric materials as an alternative to lead zirconate titanate, which involves the handling and manipulation of lead and its compounds. Different options exist to produce this material, including those based on chemical precursors. In this last case, starting from sodium and potassium ethoxides had never been reported in the literature. Results are compared with those obtained using carbonates of sodium and potassium. Niobium oxide (Nb2O5) with two sizes (nanometric and micrometric) has also been used for comparison. Results from the micro (nano)structural, optical, and dielectrical properties reveal that the best route of synthesis is based on nanometric Nb2O5 and ethoxides of sodium and potassium processed in ethanol, with nanometric size (mean grain size of 48 nm) and optical band gap of 3.24 eV for the synthesized KNN powders and dielectric loss below 0.25 and dielectric constant in the range 201-264 for sintered material (mean size of 2.18 mu m). The routes proposed in this manuscript might overcome the problems related to the obtaining of the pure (K0.5Na0.5)NbO3 when using mechanical mixing methods, while maintaining a nanometric grain size., The authors of the manuscript want to express their gratitude to the projects "Piezoceramicas sin plomo sinterizadas a baja temperatura: procesamiento energeticamente efectivo y ambientalmente sostenible mediante sinterizacion por SPS" (PID2021-128548OB-C22) and "Piezoceramicas libres de plomo mediante sinterizacion a baja temperatura: procesamiento energe ticamente eficaz y medioambientalmente sosten-ible: sinterizacion por microondas" (PID2021-128548OB-C21) funded by the Spanish Ministerio de Ciencia e Innovacion (MCIN) and Agencia Estatal de Investigacion (AEI, MCIN/AEI/10.13039/501100011033) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced properties of ZrSiO4/ZrO2 composites produced by colloidal processing and spark plasma sintering

  • Rosado, Eduardo
  • Suárez-Menéndez, Marta
  • Moreno, Rodrigo
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Benavente Martínez, Rut|||0000-0002-4566-9475
[EN] Zirconium oxide and silicate are well-known reference materials in ceramics. However, the performance of zircon/zirconia composites has not received the required attention considering the interesting properties and capabilities. Zircon and zircon/zirconia suspensions were optimised by colloidal processing routes. These suspensions were either slip cast to obtain pieces that were conventionally sintered or freeze-dried to obtain homogeneous powder mixtures for consolidation by non-conventional Spark Plasma Sintering (SPS). Pure zircon materials with densities up to 97.0 % and a hardness of 10.1 GPa were obtained by conventional sintering (1550 degrees C/120 min) whereas densities higher than 99.5 % and hardness up to 12.7 GPa were achieved by SPS (1500 degrees C/ 5 min). By introducing 20 vol.% zirconia as a sintering additive, densities up to 99.3 % and a hardness of 11.1 GPa were achieved by conventional sintering (1500 degrees C/120 min) whereas densities of 99.9 % and a hardness of 13.5 GPa were obtained by SPS (1400 degrees C/5 min)., This publication is part of the grant PID2021-124521OB-I00 and PID2021-128548OB-C21 & C22 funded by MCIN/AEI/10.13039/ 501100011033, and pre-doctoral fellowship PRE2019-091092. CINNCSIC acknowledges the project CPP2022-009892.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glass with a low-melting temperature belonging to the P2O5–CaO–Na2O system, applied as a coating on technical ceramics (alumina, zirconia) and traditional ceramics (porcelain stoneware), Vidrio de baja temperatura de fusión perteneciente al sistema P2O5-CaO-Na2O, aplicado como revestimiento sobre cerámica técnica (alúmina, circona) y tradicional (gres porcelánico)

  • Díaz, Luis A.
  • Suárez, Marta
  • Bartolomé, Jose F.
  • López-Esteban, Sonia
  • Cabal, Belén
  • Moreno, Arnaldo
  • Bordes, María del Carmen
  • Fernández, Adolfo
  • Pecharromán, Carlos
  • Moya, J. S.
[EN] This article investigates the development and potential applications of low-melting point lead-free glasses. Their importance is due to strong market demands to comply with the strict international regulations against the use of lead. In this work, a preliminary study of the existing interactions of a low-melting-temperature glass belonging to the P2O5–CaO–Na2O system when it is deposited on different ceramic substrates, both traditional (porcelain stoneware) and technical (alumina and zirconia), has been carried out. The ionic diffusion through the studied interfaces, the phases present, the composition of the glassy phase and the surface morphology of the coating have been studied by Field Emission Scanning Electron Microscopy (FESEM), with coupled EDX microanalysis. The chemical resistance of the different glassy coatings obtained is also evaluated. The results showed that these new lead-free low-melting-temperature glassy coatings are chemically and mechanically compatible, and promising candidates for applications and markets in a broad range of fields., [ES] Este artículo investiga el desarrollo y aplicaciones potenciales de los vidrios sin plomo de bajo punto de fusión. La importancia de estos materiales se debe a las fuertes demandas del mercado por las estrictas normativas internacionales contrarias a la utilización del plomo. En este trabajo se ha realizado un estudio preliminar de las interacciones existentes de un vidrio de baja temperatura de fusión, perteneciente al sistema P2O5-CaO-Na2O, cuando se deposita sobre diferentes sustratos cerámicos tanto tradicionales (gres porcelánico) como técnicos (alúmina y circona). Mediante un estudio por microscopía electrónica de barrido con emisión de campo (FESEM) con microanálisis EDX acoplado, se han evaluado la difusión iónica a través de las interfases estudiadas, las fases presentes, la composición de la fase vítrea y la morfología superficial del recubrimiento. Además, se ha evaluado la resistencia química de los recubrimientos vítreos obtenidos. Los resultados muestran que son química y mecánicamente compatibles con las cerámicas tradicionales y técnicas. Estos resultados convierten a estos vidrios sin plomo y de baja temperatura de fusión en prometedores candidatos para un amplio rango de aplicaciones y mercados., The authors acknowledge the financial support of PID2021-128548OB-C22 project and PID2020-119130GB-I00 project funded by the Spanish Ministerio de Ciencia e Innovación (MCIN) and Agencia Estatal de Investigación (AEI, MCIN/AEI/10.13039/501100011033), as well as the financial support of CSIC under grant 201960E103 and from FICYT (IDI/2021/000106)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing cutting tool durability: Exploration of Al2O3-SiCw-graphene composites fabricated by SPS for improved mechanical and scratch resistance

  • Suárez, Marta
  • Benavente, Rut
  • Borrell, Amparo
  • Pérez Mas, Ana Matilde
  • Menéndez López, Rosa María
  • Gutiérrez-González, C. F.
  • Fernández, Adolfo
This study focuses on the fabrication and characterisation of Al2O3-SiCw-rGO composites sintered by spark plasma sintering (SPS) technique. The research is mainly focused on understanding the impact of varying graphene content (0.5, 1.0 and 1.5 vol %) on nanomechanical properties and scratch resistance. Among the compositions investigated, the composite containing 0.5 vol% graphene showed superior mechanical properties. Specifically, it exhibited a hardness of ∼30 GPa, a fracture toughness of 10.5 MPa m1/2 and a flexural strength of ∼920 MPa. In addition, this composite showed remarkable scratch resistance compared to composites with a higher or lower graphene content. In addition to mechanical properties, the fabricated composites also exhibited high electrical conductivity. This characteristic is especially advantageous for electrical discharge machining (EDM) processes. The high electrical conductivity enables efficient machining of complex shapes by EDM, thereby reducing machining costs while ensuring accuracy and efficiency., This publication is part of the grant PID2021-128548OB-C21&C22 funded by MCIN/AEI/10.13039/501100011033. CINN–CSIC acknowledges the project CPP2022-009892. Authors are grateful to Moscow State University of Technology “Stankin” for the evaluation of the material under real conditions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Production of calcium and magnesium titanates using concentrated solar energy

  • Fernández-González, Daniel
  • Piñuela-Noval, Juan
  • Gómez-Rodríguez, Cristian
  • Fernández, Adolfo
  • García-Quiñonez, Linda Viviana
  • Díaz, Luis A.
  • Verdeja, Luis Felipe
Solar energy is an adequate technology for different processes in metallurgy, materials processing, recycling, or ceramic-refractory materials, because of the high temperatures attained which are reached when the solar radiation is concentrated. This growing interest has also emerged from the obtaining of such temperatures without releasing pollutants such as carbon dioxide, SOx, NOx, or dioxins. Other benefits associated with concentrated solar energy are that this energy source is virtually free and the possibility of operating in places isolated from the electrical grid. Therefore, this research proposes the integration of concentrated solar energy in the production of calcium and magnesium titanates, which are materials with increasing demand in the field of electric components. Experimental work was carried out in the Odeillo solar furnace located in Font-Romeu-Odeillo-Via (France) using a 1.5-meter parabolic concentrator and mixtures of CaO and TiO2 and MgO and TiO2 in 1:1 molar ratio. Mixtures were subjected to values of incident radiation exceeding 900 W/m2 without using any special atmosphere and in very short times, which did not surpass 10 min. X-ray diffraction technique was employed to confirm the formation of the CaTiO3 and MgTiO3 perovskites. Therefore, concentrated solar energy might be a novel, fast, and environmentally sustainable manner of producing calcium and magnesium titanates., The authors of the manuscript want to express their gratitude to the project “Lead-free Piezoceramics by Low-Temperature Sintering: Energy effective and environmentally sustainable processing – Spark Plasma Sintering” (PID2021–128548OB-C22) project funded by the Spanish Ministerio de Ciencia e Innovación (MCIN) and Agencia Estatal de Investigación (AEI, MCIN/AEI/10.13039/501100011033). Juan Piñuela Noval acknowledges the Programa “Severo Ochoa” of Grants for Research and Teaching of the Principality of Asturias for the funds received for elaborating the pH. D. Thesis (Ref: BP20 041). We thank the PROMES-CNRS (PROcédés Matériaux et Energie Solaire- Centre National de la Recherche Scientifique) for providing access to its installations, the support of its scientific and technical staff, and the financial support of the SFERA-III project (Grant Agreement No 823802)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of Al2O3-Fe2O3-FeAl2O4 composites by colloidal and traditional powder routes of nano-Al2O3-Fe2O3 mixtures

  • Cordova-Mayo, Cristian
  • Fernández-González, Daniel
  • Fernández, Adolfo
  • Verdeja, Luis Felipe
  • Castillo-Rodríguez, Guadalupe Alan
  • Rodríguez-Castellanos, Edén Amaral
  • Hernández-Reséndiz, Marina
  • García-Quiñonez, Linda Viviana
  • Gómez-Rodríguez, Cristian
Morphological and microstructural changes induced by colloidal and traditional powder synthesis routes of nano-Al2O3-Fe2O3 mixtures were analyzed. Al2O3 was progressively replaced by 1, 2.5, 5, 10, and 20 wt % Fe2O3 nanoparticles. The replacement effect on dense ceramic composites formed by 100 MPa uniaxial pressure and sintered at 1500 °C was evaluated by transmission electron microscopy, scanning electron microscopy, and X-ray diffraction. After sintering treatment, the solid solution hercynite spinel-FeAl2O4 is obtained through a colloidal and a solid-state route (in all compositions). The utilization of the colloidal processing route allowed a homogeneous distribution of the Fe2O3 nanoparticles into the alumina matrix. Fe2O3 nanoparticles diffused at the Al2O3 grain boundaries, promoting better densification via hercynite formation. Also, the presence of Fe2O3 nanoparticles at grain boundaries acts, to a certain extent, as a pining component, promoting grain refinement. The colloidal synthesis route is a suitable alternative to promote densification in Al2O3-Fe2O3 dense ceramic composites., Linda Viviana García-Quiñonez acknowledges Grant (Ciencia Básica y de Frontera 2023–2024 program) CBF2023-2024-657 from CONAHCYT-México and also AUIP for the scholarship CUMEX-AUIP 2024 for stay at the University of Oviedo. Cristian Gómez Rodríguez acknowledges Grant 2024 (Consejo Veracruzano de Investigación, Científica y Desarrollo Tecnológico─COVEICyDET) for the research stay at UANL and the support of the Dirección General de Investigaciones of the Universidad Veracruzana. The authors of this manuscript express their gratitude to the project “Lead-free Piezoceramics by Low-Temperature Sintering: Energy effective and environmentally sustainable processing─Spark Plasma Sintering” (PID2021-128548OB-C22) project funded by the Spanish Ministerio de Ciencia e Innovación (MCIN) and Agencia Estatal de Investigación (AEI, MCIN/AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spark plasma sintering of β-Eucryptite/alumina nanocomposites with low thermal expansion and improved mechanical properties obtained by colloidal route

  • López-Santos, N.
  • Díaz, Luis A.
  • Benavente, Rut
  • Fernández, Adolfo
  • Suárez, Marta
Data will be made available on request., In this study, β-Eucryptite/alumina nanocomposites were synthesized using colloidal methods and sintered by Spark Plasma Sintering (SPS). Nanocomposites with three different alumina contents (2.5, 5 and 10 wt%) were prepared, with pure β-Eucryptite serving as a reference material. The microstructural characteristics of the nanocomposites were analyzed, and their mechanical properties (Young's modulus, hardness, flexural strength, fracture toughness) were evaluated. The incorporation of alumina nanoparticles effectively controlled the grain growth of β-Eucryptite during the sintering process, resulting in a fine-grained structure. Compared to monolithic β-Eucryptite, the nanocomposites exhibited significant enhancements in mechanical performance: hardness increased by at least 25 %, fracture toughness improved by 30 %, and mechanical strength rose by more than 40 %. Furthermore, the composites demonstrated a very low thermal expansion coefficient, making them promising candidates for a wide range of industrial applications., Authors acknowledges the financial support received through projects 3D-BoneWhey (PID2023-147490OB-I00) financed by MICIU/AEI/10.13039/501100011033, FreeSin (PID2021-128548OB-C21&C22), financed by MCIN/AEI/10.13039/501100011033, and MiLi (ID.101082451) financed by Horizon-CL4-2022-Space-01. The authors also thank Generalitat Valenciana for the funding CIAICO/2023/264., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

(K0.5Na0.5)NbO3 (KNN) powder: Colloidal synthesis from different sodium and potassium precursors

  • Fernández-González, Daniel
  • Gómez-Rodríguez, Cristian
  • Menéndez, José Luis
  • Borrell, Amparo
  • Moya, J. S.
  • Suárez, Marta
  • Fernández, Adolfo
  • Díaz, Luis A.
Potassium sodium niobate ((K0.5Na0.5)NbO3, KNN) is a ceramic material with potential interest in the field of piezoelectric materials as an alternative to lead zirconate titanate, which involves the handling and manipulation of lead and its compounds. Different options exist to produce this material, including those based on chemical precursors. In this last case, starting from sodium and potassium ethoxides had never been reported in the literature. Results are compared with those obtained using carbonates of sodium and potassium. Niobium oxide (Nb2O5) with two sizes (nanometric and micrometric) has also been used for comparison. Results from the micro(nano)structural, optical, and dielectrical properties reveal that the best route of synthesis is based on nanometric Nb2O5 and ethoxides of sodium and potassium processed in ethanol, with nanometric size (mean grain size of 48 nm) and optical band gap of 3.24 eV for the synthesized KNN powders and dielectric loss below 0.25 and dielectric constant in the range 201–264 for sintered material (mean size of 2.18 μm). The routes proposed in this manuscript might overcome the problems related to the obtaining of the pure (K0.5Na0.5)NbO3 when using mechanical mixing methods, while maintaining a nanometric grain size., The authors of the manuscript want to express their gratitude to the projects “Piezocerámicas sin plomo sinterizadas a baja temperatura: procesamiento energéticamente efectivo y ambientalmente sostenible mediante sinterización por SPS” (PID2021-128548OB-C22) and “Piezocerámicas libres de plomo mediante sinterización a baja temperatura: procesamiento energéticamente eficaz y medioambientalmente sostenible: sinterización por microondas” (PID2021-128548OB-C21) funded by the Spanish Ministerio de Ciencia e Innovación (MCIN) and Agencia Estatal de Investigación (AEI, MCIN/AEI /10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the Fe2O3 method of incorporation into the brucite (Mg(OH)2): a new processing route to obtain dense MgO-Fe2O3 ceramic composites

  • Hernández-Reséndiz, Marina
  • García-Quiñonez, Linda Viviana
  • Fernández-González, Daniel
  • Gómez-Rodríguez, Cristian
  • Castillo-Rodríguez, Guadalupe Alan
Data will be made available on reasonable request., The effect of adding microparticles of cations with oxidation state 3 + in doubly calcined brucite (Mg(OH)2) was studied to obtain dense MgO-Fe2O3 composites. Powders, consisting of brucite and Fe2O3 microparticles (with 1, 3, and 5 wt%), were mechanically mixed. Subsequently, the mixtures were calcined at 960 °C for 4 h. Afterward, green compacts were obtained by pressing and, then, sintering was conducted at 1600 °C for 4 h. Physical, chemical, and mechanical properties were determined in sintered samples. In addition, the morphology and microstructure were studied by SEM and XRD. The results revealed that the sample containing 5 wt% Fe2O3 exhibited a densified morphology with low porosity, as well as high cold crushing strength. This new processing route, considering brucite, as the starting material might be a potential candidate, due to the early ionic activation between cations of hematite to brucite, for obtaining dense MgO-Fe2O3 ceramic composites., This work was supported by National Council of Humanities, Science and Technology (CONAHCYT-Mexico). Guadalupe Alan Castillo Rodríguez acknowledges the grant funded by the Mexican government (Ciencia de Frontera program) CF-2023-I-719 by CONAHCYT-México. The authors of the manuscript want to express their gratitude to the project “Lead-free Piezoceramics by Low-Temperature Sintering: Energy effective and environmentally sustainable processing—Spark Plasma Sintering” (PID2021–128548OB-C22) project funded by the Spanish Ministerio de Ciencia e Innovación (MCIN) and Agencia Estatal de Investigación (AEI, MCIN/AEI/https://doi.org/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of calcination rate on mechano-chemically activated powders for the synthesis of lead-free KNN-type ceramics, Efecto de la calcinación y de la activación mecanoquímica para obtener cerámicas sin plomo basadas en KNN

  • Bonilla, Ashley
  • Pruna, Alina
  • Benavente, Rut
  • Salvador, M. D.
  • Busquets-Mataix, David
  • Fernández-González, Daniel
  • Borrell, Amparo
[EN] Given the raising environmental concerns over lead toxicity, replacing the common lead-based piezoelectric ceramics with a proper alternative became a hot topic. (Na0.5K0.5)NbO3 (KNN) is considered a potential replacement for such ceramics. This work presents the synthesis of KNN-type ceramics based on conventional solid-state reaction, where the effect of precursor particle size is studied. A combined mechanical activation by ball milling and calcination at low temperature of 800 °C is applied. The phase structure evolution, morphology and mechanical properties are investigated systematically with the particle size and the calcination rate. The results indicate a marked effect of the precursor particle size on the properties of obtained ceramics. Secondary phase content could be lowered and tetragonality improved by the applied approach. Despite the presence of secondary phases, dielectric measurements indicated typical values of dielectric constant and loss for piezoelectric materials., [ES] La sustitución de las cerámicas piezoeléctricas comunes a base de plomo por una alternativa adecuada, se convirtió en un tema importante debido a las crecientes preocupaciones medioambientales por la toxicidad del plomo. Los (Na0.5K0.5)NbO3 (KNN) se consideran un posible reemplazo para cerámicas piezoeléctricas comunes a base de plomo. Este trabajo presenta la obtención de cerámicas tipo KNN mediante una reacción convencional en estado sólido donde se estudia el efecto del tamaño de las partículas precursoras. El método de síntesis ha empleado una combinación de molienda de atrición para activar la mezcla de precursores y de calcinación a baja temperatura de 800 °C. La evolución de las fases, la morfología y las propiedades mecánicas se investigan sistemáticamente con el tamaño de partícula y la rampa de calcinación. Los resultados indican un marcado efecto del tamaño de partícula del precursor sobre las propiedades de las cerámicas obtenidas. El contenido de fases secundarias y de la fase tetragonal se pueden ajustar ligeramente mediante el método presentado. Las medidas dieléctricas han indicado valores típicos para las cerámicas piezoeléctricas (constante dieléctrica y pérdidas) a pesar de la presencia de fases secundarias., This publication is part of the grant PID2021-128548OB-C21&C22 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”, and the grant CNS2023-144190 funded by MICIU/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. CIGRIS/2022/077 project funded by Generalitat Valenciana., Peer reviewed