Pasar al contenido principal

PIEZAS Y RECUBRIMIENTOS CERAMICOS AVANZADOS DE ELEVADAS PRESTACIONES TERMICAS Y MECANICAS A PARTIR DE DISOLUCIONES Y SUSPENSIONES PRECURSORAS

PRE2019-091092

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fast-low temperature microwave sintering of ZrSiO4-ZrO2 composites

  • Moratal, Sheila
  • Rosado, Eduardo
  • Moreno, Rodrigo
  • Benavente Martínez, Rut|||0000-0002-4566-9475
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] Today, many industrial applications require components that work under extreme conditions, especially at very high temperatures (>1200 & DEG;C) for a long time. An excellent combination of properties such as low thermal conductivity, low coefficient of thermal expansion and high chemical resistance are required for such applications. Advanced ceramic materials based on zircon-zirconia composites (ZrSiO4-ZrO2) possess these properties, thus making them attractive for, i.e., high-level radioactive waste immobilisation. The main drawback of these materials are the high temperatures and long residence times required to sinter them and obtain high densities, which entails high energy consumption and costs. Therefore, non-conventional microwave sintering is a very powerful and efficient technique capable of reducing sintering temperatures and holding times. The objective of this study is to evaluate the microwave sinterability of zircon-zirconia powders obtained by colloidal methods (80-20 vol% and 20-80 vol% ZrSiO4-ZrO2). A stability study of the phases present was carried out by X-ray diffraction and the mechanical and microstructural properties were evaluated in order to obtain the best materials with outstanding final properties., Grants PID2021-128548OB-C21 and PID2021-124521OB-100 funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe". Grant CIGE/2021/076 funded by Generalitat Valenciana. E. Rosado acknowledges a MCIN/AEI pre -doctoral fellowship PRE2019-091092.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced properties of ZrSiO4/ZrO2 composites produced by colloidal processing and spark plasma sintering

  • Rosado, Eduardo
  • Suárez-Menéndez, Marta
  • Moreno, Rodrigo
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Benavente Martínez, Rut|||0000-0002-4566-9475
[EN] Zirconium oxide and silicate are well-known reference materials in ceramics. However, the performance of zircon/zirconia composites has not received the required attention considering the interesting properties and capabilities. Zircon and zircon/zirconia suspensions were optimised by colloidal processing routes. These suspensions were either slip cast to obtain pieces that were conventionally sintered or freeze-dried to obtain homogeneous powder mixtures for consolidation by non-conventional Spark Plasma Sintering (SPS). Pure zircon materials with densities up to 97.0 % and a hardness of 10.1 GPa were obtained by conventional sintering (1550 degrees C/120 min) whereas densities higher than 99.5 % and hardness up to 12.7 GPa were achieved by SPS (1500 degrees C/ 5 min). By introducing 20 vol.% zirconia as a sintering additive, densities up to 99.3 % and a hardness of 11.1 GPa were achieved by conventional sintering (1500 degrees C/120 min) whereas densities of 99.9 % and a hardness of 13.5 GPa were obtained by SPS (1400 degrees C/5 min)., This publication is part of the grant PID2021-124521OB-I00 and PID2021-128548OB-C21 & C22 funded by MCIN/AEI/10.13039/ 501100011033, and pre-doctoral fellowship PRE2019-091092. CINNCSIC acknowledges the project CPP2022-009892.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Manufacture of zircon bulk parts and scaffolds by digital light processing

  • Rosado, Eduardo
  • Moreno, Rodrigo
  • Graule, T.
  • Stuer, M.
[EN] Zircon (ZrSiO4) is a low cost and widely available ceramic raw material used in thermal applications due to its low thermal conductivity and high thermal shock resistance. The aim of the present work was to obtain solid and reticular zircon pieces by digital light processing (DLP), scarcely reported in the literature. For this aim, the dispersion of zircon powders in two different solvents (benzyl alcohol and cyclohexanol) was studied using different UV-curable polymeric systems. The effect of different dispersant concentrations as well as different dispersion/homogenisation methods were evaluated by rheological characterisation. Bulk bodies and scaffolds were obtained by DLP, studying the effect of different printing parameters on the quality and resolution of the produced parts. Debinding and sintering steps were optimised using different thermal cycles. Dense zircon scaffolds (>96%TD) were obtained from the cyclohexanol based slurries. Finally, the obtained materials were characterised in terms of crystallographic composition and microstructure., This research was funded by the Spanish Ministry of Science and Innovation, the State Research Agency (AEI) and the European Regional Development Fund (FEDER) under project PID2021-124521OB-I00, the JECS Trust mobility grant with contract number 2023345 and pre-doctoral fellowship PRE2019–091092., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mullite-silica scaffolds obtained by stereolithography and reaction sintering

  • Rosado, Eduardo
  • Moreno, Rodrigo
[EN] Mullite is a widely used refractory ceramic due to its good properties and high temperature stability. The necessity to obtain complex mullite architectures has encouraged the development of new AM techniques with improved resolution and surface finishing quality. In the present work, mullite-based scaffolds were obtained by stereolithography using a commercial silica resin and alumina nanoparticles following two routes: infiltration of printed porous silica parts with a colloidal alumina sol and printing of silica/alumina parts by developing a photocurable alumina resin that is mixed with the silica one. Post-processing of the obtained parts was carried out, including debinding and subsequent reaction sintering of the starting ceramic materials to give rise to mullite phase. All materials were characterised in terms of composition and microstructure, demonstrating that the second route results more effective to produce mullite structures in the final parts due to the higher alumina concentration and the larger reaction surface., This research was funded by the Spanish Ministry of Science and Innovation, the State Research Agency (AEI) and the European Regional Development Fund (FEDER) under project PID2021-124521OB-I00 and pre-doctoral fellowship PRE2019–091092., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced properties of ZrSiO4/ZrO2 composites produced by colloidal processing and spark plasma sintering

  • Rosado, Eduardo
  • Borrell, Amparo
  • Benavente, Rut
  • Suárez, Marta
  • Moreno, Rodrigo
Zirconium oxide and silicate are well-known reference materials in ceramics. However, the performance of zircon/zirconia composites has not received the required attention considering the interesting properties and capabilities. Zircon and zircon/zirconia suspensions were optimised by colloidal processing routes. These suspensions were either slip cast to obtain pieces that were conventionally sintered or freeze-dried to obtain homogeneous powder mixtures for consolidation by non-conventional Spark Plasma Sintering (SPS). Pure zircon materials with densities up to 97.0 % and a hardness of 10.1 GPa were obtained by conventional sintering (1550 ºC/120 min) whereas densities higher than 99.5 % and hardness up to 12.7 GPa were achieved by SPS (1500 ºC/5 min). By introducing 20 vol.% zirconia as a sintering additive, densities up to 99.3 % and a hardness of 11.1 GPa were achieved by conventional sintering (1500 ºC/120 min) whereas densities of 99.9 % and a hardness of 13.5 GPa were obtained by SPS (1400 ºC/5 min)., This publication is part of the grant PID2021–124521OB-I00 and PID2021–128548OB-C21 & C22 funded by MCIN/AEI/10.13039/501100011033, and pre-doctoral fellowship PRE2019–091092. CINN-CSIC acknowledges the project CPP2022–009892., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reaction-sintered zircon-based nanostructured coatings obtained by suspension plasma spraying

  • Rosado, Eduardo
  • Cañas, E.
  • López-Sánchez, Jesús
  • Sánchez, E.
  • Moreno, Rodrigo
Zircon (ZrSiO4) is an inexpensive and widely available material with excellent thermal properties that makes it an ideal candidate for thermal barrier coatings. Previous works have demonstrated the feasibility of obtaining coatings with a high retention of zircon by plasma spraying of ZrSiO4 and ZrSiO4/ZrO2 suspensions. Suspensions of ZrSiO4/Al2O3 and ZrSiO4/TiO2 were produced by dispersing a micrometric zircon powder into alumina and titania colloidal sols, optimising their colloidal stability and rheological behaviour. Optimised slurries were plasma sprayed onto metallic substrates, obtaining coatings with the typical morphologies obtained by suspension plasma spraying (SPS). Nanostructured coatings with nanoparticles embedded in the molten matrix were obtained at higher proportions of sprayed colloidal sol. The high retention of ZrSiO4 in the final coatings and the formation of new crystallographic phases of mullite and zirconium titanate by reaction of the by-products of zircon decomposition (SiO2 and ZrO2) and the Al2O3 and TiO2 colloids was demonstrated. © 2024 The Authors, This research was funded by the Spanish Ministry of Science,Innovation and Universities (MCIU), the State Research Agency (AEI) and the European Regional Development Fund (FEDER) under project PID2021-124521OB-I00 and pre-doctoral fellowship PRE2019-091092. J. L.-S. acknowledges the financial support from Spanish Ministry of Economic Affairs and Digital Transformation (MINECO) through the project PID2021-122980OB-C51MCIN and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+) .r Innovation and Universities (MCIU) , the State Research Agency (AEI) and the European Regional Development Fund (FEDER) under project PID2021-124521OB-I00 and pre-doctoral fellowship PRE2019-091092. J. L.-S. acknowledges the financial support from Spanish Ministry of Economic Affairs and Digital Transformation (MINECO) through the project PID2021-122980OB-C51MCIN and from grant RYC2022-035912-I funded by MCIU/AEI/10.13039/501100011033 and by the European Social Fund Plus (ESF+) . +) ., Peer reviewed